aboutsummaryrefslogtreecommitdiffstats
path: root/test/ardmake/hardware/bootloaders/optiboot/Makefile
diff options
context:
space:
mode:
authorvg <vgm+dev@devys.org>2020-07-07 16:24:01 +0200
committervg <vgm+dev@devys.org>2020-07-07 16:24:01 +0200
commit66dcf910bd4744d8ced56cb9586aa937a1a2d4c5 (patch)
treedf4dca1ae4af1e5df0be0d1f4f2cd0d54751f8e8 /test/ardmake/hardware/bootloaders/optiboot/Makefile
downloadhic-master.tar.gz
hic-master.tar.bz2
hic-master.zip
first commitHEADmaster
Diffstat (limited to 'test/ardmake/hardware/bootloaders/optiboot/Makefile')
-rw-r--r--test/ardmake/hardware/bootloaders/optiboot/Makefile239
1 files changed, 239 insertions, 0 deletions
diff --git a/test/ardmake/hardware/bootloaders/optiboot/Makefile b/test/ardmake/hardware/bootloaders/optiboot/Makefile
new file mode 100644
index 0000000..0fd6005
--- /dev/null
+++ b/test/ardmake/hardware/bootloaders/optiboot/Makefile
@@ -0,0 +1,239 @@
+# Makefile for ATmegaBOOT
+# E.Lins, 18.7.2005
+# $Id$
+#
+# Instructions
+#
+# To make bootloader .hex file:
+# make diecimila
+# make lilypad
+# make ng
+# etc...
+#
+# To burn bootloader .hex file:
+# make diecimila_isp
+# make lilypad_isp
+# make ng_isp
+# etc...
+
+# program name should not be changed...
+PROGRAM = optiboot
+
+# enter the parameters for the avrdude isp tool
+ISPTOOL = stk500v2
+ISPPORT = usb
+ISPSPEED = -b 115200
+
+MCU_TARGET = atmega168
+LDSECTION = --section-start=.text=0x3e00
+
+# the efuse should really be 0xf8; since, however, only the lower
+# three bits of that byte are used on the atmega168, avrdude gets
+# confused if you specify 1's for the higher bits, see:
+# http://tinker.it/now/2007/02/24/the-tale-of-avrdude-atmega168-and-extended-bits-fuses/
+#
+# similarly, the lock bits should be 0xff instead of 0x3f (to
+# unlock the bootloader section) and 0xcf instead of 0x0f (to
+# lock it), but since the high two bits of the lock byte are
+# unused, avrdude would get confused.
+
+ISPFUSES = avrdude -c $(ISPTOOL) -p $(MCU_TARGET) -P $(ISPPORT) $(ISPSPEED) \
+-e -u -U lock:w:0x3f:m -U efuse:w:0x$(EFUSE):m -U hfuse:w:0x$(HFUSE):m -U lfuse:w:0x$(LFUSE):m
+ISPFLASH = avrdude -c $(ISPTOOL) -p $(MCU_TARGET) -P $(ISPPORT) $(ISPSPEED) \
+-U flash:w:$(PROGRAM)_$(TARGET).hex -U lock:w:0x0f:m
+
+STK500 = "C:\Program Files\Atmel\AVR Tools\STK500\Stk500.exe"
+STK500-1 = $(STK500) -e -d$(MCU_TARGET) -pf -vf -if$(PROGRAM)_$(TARGET).hex \
+-lFF -LFF -f$(HFUSE)$(LFUSE) -EF8 -ms -q -cUSB -I200kHz -s -wt
+STK500-2 = $(STK500) -d$(MCU_TARGET) -ms -q -lCF -LCF -cUSB -I200kHz -s -wt
+
+OBJ = $(PROGRAM).o
+OPTIMIZE = -Os -fno-inline-small-functions -fno-split-wide-types -mshort-calls
+
+DEFS =
+LIBS =
+
+CC = avr-gcc
+
+# Override is only needed by avr-lib build system.
+
+override CFLAGS = -g -Wall $(OPTIMIZE) -mmcu=$(MCU_TARGET) -DF_CPU=$(AVR_FREQ) $(DEFS)
+override LDFLAGS = -Wl,$(LDSECTION) -Wl,--relax -nostartfiles
+
+OBJCOPY = avr-objcopy
+OBJDUMP = avr-objdump
+
+# 20MHz clocked platforms
+#
+# These are capable of 230400 baud, or 115200 baud on PC (Arduino Avrdude issue)
+#
+
+pro20: TARGET = pro_20mhz
+pro20: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200'
+pro20: AVR_FREQ = 20000000L
+pro20: $(PROGRAM)_pro_20mhz.hex
+pro20: $(PROGRAM)_pro_20mhz.lst
+
+pro20_isp: pro20
+pro20_isp: TARGET = pro_20mhz
+pro20_isp: HFUSE = DD # 2.7V brownout
+pro20_isp: LFUSE = C6 # Full swing xtal (20MHz) 258CK/14CK+4.1ms
+pro20_isp: EFUSE = 02 # 512 byte boot
+pro20_isp: isp
+
+# 16MHz clocked platforms
+#
+# These are capable of 230400 baud, or 115200 baud on PC (Arduino Avrdude issue)
+#
+
+pro16: TARGET = pro_16MHz
+pro16: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200'
+pro16: AVR_FREQ = 16000000L
+pro16: $(PROGRAM)_pro_16MHz.hex
+pro16: $(PROGRAM)_pro_16MHz.lst
+
+pro16_isp: pro16
+pro16_isp: TARGET = pro_16MHz
+pro16_isp: HFUSE = DD # 2.7V brownout
+pro16_isp: LFUSE = C6 # Full swing xtal (20MHz) 258CK/14CK+4.1ms
+pro16_isp: EFUSE = 02 # 512 byte boot
+pro16_isp: isp
+
+# Diecimila and NG use identical bootloaders
+#
+diecimila: TARGET = diecimila
+diecimila: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200'
+diecimila: AVR_FREQ = 16000000L
+diecimila: $(PROGRAM)_diecimila.hex
+diecimila: $(PROGRAM)_diecimila.lst
+
+diecimila_isp: diecimila
+diecimila_isp: TARGET = diecimila
+diecimila_isp: HFUSE = DD # 2.7V brownout
+diecimila_isp: LFUSE = FF # Low power xtal (16MHz) 16KCK/14CK+65ms
+diecimila_isp: EFUSE = 02 # 512 byte boot
+diecimila_isp: isp
+
+atmega328: TARGET = atmega328
+atmega328: MCU_TARGET = atmega328p
+atmega328: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200'
+atmega328: AVR_FREQ = 16000000L
+atmega328: LDSECTION = --section-start=.text=0x7e00
+atmega328: $(PROGRAM)_atmega328.hex
+atmega328: $(PROGRAM)_atmega328.lst
+
+atmega328_isp: atmega328
+atmega328_isp: TARGET = atmega328
+atmega328_isp: MCU_TARGET = atmega328p
+atmega328_isp: HFUSE = DE # 512 byte boot
+atmega328_isp: LFUSE = FF # Low power xtal (16MHz) 16KCK/14CK+65ms
+atmega328_isp: EFUSE = 05 # 2.7V brownout
+atmega328_isp: isp
+
+# 8MHz clocked platforms
+#
+# These are capable of 115200 baud
+#
+
+lilypad: TARGET = lilypad
+lilypad: CFLAGS += '-DLED_START_FLASHES=3' '-DSOFT_UART' '-DBAUD_RATE=115200'
+lilypad: AVR_FREQ = 8000000L
+lilypad: $(PROGRAM)_lilypad.hex
+lilypad: $(PROGRAM)_lilypad.lst
+
+lilypad_isp: lilypad
+lilypad_isp: TARGET = lilypad
+lilypad_isp: HFUSE = DD # 2.7V brownout
+lilypad_isp: LFUSE = E2 # Internal 8MHz osc (8MHz) Slow rising power
+lilypad_isp: EFUSE = 02 # 512 byte boot
+lilypad_isp: isp
+
+lilypad_resonator: TARGET = lilypad_resonator
+lilypad_resonator: CFLAGS += '-DLED_START_FLASHES=3' '-DSOFT_UART' '-DBAUD_RATE=115200'
+lilypad_resonator: AVR_FREQ = 8000000L
+lilypad_resonator: $(PROGRAM)_lilypad_resonator.hex
+lilypad_resonator: $(PROGRAM)_lilypad_resonator.lst
+
+lilypad_resonator_isp: lilypad_resonator
+lilypad_resonator_isp: TARGET = lilypad_resonator
+lilypad_resonator_isp: HFUSE = DD # 2.7V brownout
+lilypad_resonator_isp: LFUSE = C6 # Full swing xtal (20MHz) 258CK/14CK+4.1ms
+lilypad_resonator_isp: EFUSE = 02 # 512 byte boot
+lilypad_resonator_isp: isp
+
+pro8: TARGET = pro_8MHz
+pro8: CFLAGS += '-DLED_START_FLASHES=3' '-DSOFT_UART' '-DBAUD_RATE=115200'
+pro8: AVR_FREQ = 8000000L
+pro8: $(PROGRAM)_pro_8MHz.hex
+pro8: $(PROGRAM)_pro_8MHz.lst
+
+pro8_isp: pro8
+pro8_isp: TARGET = pro_8MHz
+pro8_isp: HFUSE = DD # 2.7V brownout
+pro8_isp: LFUSE = C6 # Full swing xtal (20MHz) 258CK/14CK+4.1ms
+pro8_isp: EFUSE = 02 # 512 byte boot
+pro8_isp: isp
+
+atmega328_pro8: TARGET = atmega328_pro_8MHz
+atmega328_pro8: MCU_TARGET = atmega328p
+atmega328_pro8: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200'
+atmega328_pro8: AVR_FREQ = 8000000L
+atmega328_pro8: LDSECTION = --section-start=.text=0x7e00
+atmega328_pro8: $(PROGRAM)_atmega328_pro_8MHz.hex
+atmega328_pro8: $(PROGRAM)_atmega328_pro_8MHz.lst
+
+atmega328_pro8_isp: atmega328_pro8
+atmega328_pro8_isp: TARGET = atmega328_pro_8MHz
+atmega328_pro8_isp: MCU_TARGET = atmega328p
+atmega328_pro8_isp: HFUSE = DE # 512 byte boot
+atmega328_pro8_isp: LFUSE = FF # Low power xtal (16MHz) 16KCK/14CK+65ms
+atmega328_pro8_isp: EFUSE = 05 # 2.7V brownout
+atmega328_pro8_isp: isp
+
+# 1MHz clocked platforms
+#
+# These are capable of 9600 baud
+#
+
+luminet: TARGET = luminet
+luminet: MCU_TARGET = attiny84
+luminet: CFLAGS += '-DLED_START_FLASHES=3' '-DSOFT_UART' '-DBAUD_RATE=9600'
+luminet: CFLAGS += '-DVIRTUAL_BOOT_PARTITION'
+luminet: AVR_FREQ = 1000000L
+luminet: LDSECTION = --section-start=.text=0x1d00
+luminet: $(PROGRAM)_luminet.hex
+luminet: $(PROGRAM)_luminet.lst
+
+luminet_isp: luminet
+luminet_isp: TARGET = luminet
+luminet_isp: MCU_TARGET = attiny84
+luminet_isp: HFUSE = DF # Brownout disabled
+luminet_isp: LFUSE = 62 # 1MHz internal oscillator, slowly rising power
+luminet_isp: EFUSE = FE # Self-programming enable
+luminet_isp: isp
+
+isp: $(TARGET)
+ $(ISPFUSES)
+ $(ISPFLASH)
+
+isp-stk500: $(PROGRAM)_$(TARGET).hex
+ $(STK500-1)
+ $(STK500-2)
+
+%.elf: $(OBJ)
+ $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $^ $(LIBS)
+
+clean:
+ rm -rf *.o *.elf *.lst *.map *.sym *.lss *.eep *.srec *.bin *.hex
+
+%.lst: %.elf
+ $(OBJDUMP) -h -S $< > $@
+
+%.hex: %.elf
+ $(OBJCOPY) -j .text -j .data -O ihex $< $@
+
+%.srec: %.elf
+ $(OBJCOPY) -j .text -j .data -O srec $< $@
+
+%.bin: %.elf
+ $(OBJCOPY) -j .text -j .data -O binary $< $@