diff options
Diffstat (limited to 'test/ardmake/hardware/bootloaders')
47 files changed, 15261 insertions, 0 deletions
diff --git a/test/ardmake/hardware/bootloaders/atmega/ATmegaBOOT_168.c b/test/ardmake/hardware/bootloaders/atmega/ATmegaBOOT_168.c new file mode 100644 index 0000000..2b9fefa --- /dev/null +++ b/test/ardmake/hardware/bootloaders/atmega/ATmegaBOOT_168.c @@ -0,0 +1,1054 @@ +/**********************************************************/
+/* Serial Bootloader for Atmel megaAVR Controllers */
+/* */
+/* tested with ATmega8, ATmega128 and ATmega168 */
+/* should work with other mega's, see code for details */
+/* */
+/* ATmegaBOOT.c */
+/* */
+/* */
+/* 20090308: integrated Mega changes into main bootloader */
+/* source by D. Mellis */
+/* 20080930: hacked for Arduino Mega (with the 1280 */
+/* processor, backwards compatible) */
+/* by D. Cuartielles */
+/* 20070626: hacked for Arduino Diecimila (which auto- */
+/* resets when a USB connection is made to it) */
+/* by D. Mellis */
+/* 20060802: hacked for Arduino by D. Cuartielles */
+/* based on a previous hack by D. Mellis */
+/* and D. Cuartielles */
+/* */
+/* Monitor and debug functions were added to the original */
+/* code by Dr. Erik Lins, chip45.com. (See below) */
+/* */
+/* Thanks to Karl Pitrich for fixing a bootloader pin */
+/* problem and more informative LED blinking! */
+/* */
+/* For the latest version see: */
+/* http://www.chip45.com/ */
+/* */
+/* ------------------------------------------------------ */
+/* */
+/* based on stk500boot.c */
+/* Copyright (c) 2003, Jason P. Kyle */
+/* All rights reserved. */
+/* see avr1.org for original file and information */
+/* */
+/* This program is free software; you can redistribute it */
+/* and/or modify it under the terms of the GNU General */
+/* Public License as published by the Free Software */
+/* Foundation; either version 2 of the License, or */
+/* (at your option) any later version. */
+/* */
+/* This program is distributed in the hope that it will */
+/* be useful, but WITHOUT ANY WARRANTY; without even the */
+/* implied warranty of MERCHANTABILITY or FITNESS FOR A */
+/* PARTICULAR PURPOSE. See the GNU General Public */
+/* License for more details. */
+/* */
+/* You should have received a copy of the GNU General */
+/* Public License along with this program; if not, write */
+/* to the Free Software Foundation, Inc., */
+/* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */
+/* */
+/* Licence can be viewed at */
+/* http://www.fsf.org/licenses/gpl.txt */
+/* */
+/* Target = Atmel AVR m128,m64,m32,m16,m8,m162,m163,m169, */
+/* m8515,m8535. ATmega161 has a very small boot block so */
+/* isn't supported. */
+/* */
+/* Tested with m168 */
+/**********************************************************/
+
+/* $Id$ */
+
+
+/* some includes */
+#include <inttypes.h>
+#include <avr/io.h>
+#include <avr/pgmspace.h>
+#include <avr/interrupt.h>
+#include <avr/wdt.h>
+#include <util/delay.h>
+
+/* the current avr-libc eeprom functions do not support the ATmega168 */
+/* own eeprom write/read functions are used instead */
+#if !defined(__AVR_ATmega168__) || !defined(__AVR_ATmega328P__)
+#include <avr/eeprom.h>
+#endif
+
+/* Use the F_CPU defined in Makefile */
+
+/* 20060803: hacked by DojoCorp */
+/* 20070626: hacked by David A. Mellis to decrease waiting time for auto-reset */
+/* set the waiting time for the bootloader */
+/* get this from the Makefile instead */
+/* #define MAX_TIME_COUNT (F_CPU>>4) */
+
+/* 20070707: hacked by David A. Mellis - after this many errors give up and launch application */
+#define MAX_ERROR_COUNT 5
+
+/* set the UART baud rate */
+/* 20060803: hacked by DojoCorp */
+//#define BAUD_RATE 115200
+#ifndef BAUD_RATE
+#define BAUD_RATE 19200
+#endif
+
+
+/* SW_MAJOR and MINOR needs to be updated from time to time to avoid warning message from AVR Studio */
+/* never allow AVR Studio to do an update !!!! */
+#define HW_VER 0x02
+#define SW_MAJOR 0x01
+#define SW_MINOR 0x10
+
+
+/* Adjust to suit whatever pin your hardware uses to enter the bootloader */
+/* ATmega128 has two UARTS so two pins are used to enter bootloader and select UART */
+/* ATmega1280 has four UARTS, but for Arduino Mega, we will only use RXD0 to get code */
+/* BL0... means UART0, BL1... means UART1 */
+#ifdef __AVR_ATmega128__
+#define BL_DDR DDRF
+#define BL_PORT PORTF
+#define BL_PIN PINF
+#define BL0 PINF7
+#define BL1 PINF6
+#elif defined __AVR_ATmega1280__
+/* we just don't do anything for the MEGA and enter bootloader on reset anyway*/
+#else
+/* other ATmegas have only one UART, so only one pin is defined to enter bootloader */
+#define BL_DDR DDRD
+#define BL_PORT PORTD
+#define BL_PIN PIND
+#define BL PIND6
+#endif
+
+
+/* onboard LED is used to indicate, that the bootloader was entered (3x flashing) */
+/* if monitor functions are included, LED goes on after monitor was entered */
+#if defined __AVR_ATmega128__ || defined __AVR_ATmega1280__
+/* Onboard LED is connected to pin PB7 (e.g. Crumb128, PROBOmega128, Savvy128, Arduino Mega) */
+#define LED_DDR DDRB
+#define LED_PORT PORTB
+#define LED_PIN PINB
+#define LED PINB7
+#else
+/* Onboard LED is connected to pin PB5 in Arduino NG, Diecimila, and Duomilanuove */
+/* other boards like e.g. Crumb8, Crumb168 are using PB2 */
+#define LED_DDR DDRB
+#define LED_PORT PORTB
+#define LED_PIN PINB
+#define LED PINB5
+#endif
+
+
+/* monitor functions will only be compiled when using ATmega128, due to bootblock size constraints */
+#if defined(__AVR_ATmega128__) || defined(__AVR_ATmega1280__)
+#define MONITOR 1
+#endif
+
+
+/* define various device id's */
+/* manufacturer byte is always the same */
+#define SIG1 0x1E // Yep, Atmel is the only manufacturer of AVR micros. Single source :(
+
+#if defined __AVR_ATmega1280__
+#define SIG2 0x97
+#define SIG3 0x03
+#define PAGE_SIZE 0x80U //128 words
+
+#elif defined __AVR_ATmega1281__
+#define SIG2 0x97
+#define SIG3 0x04
+#define PAGE_SIZE 0x80U //128 words
+
+#elif defined __AVR_ATmega128__
+#define SIG2 0x97
+#define SIG3 0x02
+#define PAGE_SIZE 0x80U //128 words
+
+#elif defined __AVR_ATmega64__
+#define SIG2 0x96
+#define SIG3 0x02
+#define PAGE_SIZE 0x80U //128 words
+
+#elif defined __AVR_ATmega32__
+#define SIG2 0x95
+#define SIG3 0x02
+#define PAGE_SIZE 0x40U //64 words
+
+#elif defined __AVR_ATmega16__
+#define SIG2 0x94
+#define SIG3 0x03
+#define PAGE_SIZE 0x40U //64 words
+
+#elif defined __AVR_ATmega8__
+#define SIG2 0x93
+#define SIG3 0x07
+#define PAGE_SIZE 0x20U //32 words
+
+#elif defined __AVR_ATmega88__
+#define SIG2 0x93
+#define SIG3 0x0a
+#define PAGE_SIZE 0x20U //32 words
+
+#elif defined __AVR_ATmega168__
+#define SIG2 0x94
+#define SIG3 0x06
+#define PAGE_SIZE 0x40U //64 words
+
+#elif defined __AVR_ATmega328P__
+#define SIG2 0x95
+#define SIG3 0x0F
+#define PAGE_SIZE 0x40U //64 words
+
+#elif defined __AVR_ATmega162__
+#define SIG2 0x94
+#define SIG3 0x04
+#define PAGE_SIZE 0x40U //64 words
+
+#elif defined __AVR_ATmega163__
+#define SIG2 0x94
+#define SIG3 0x02
+#define PAGE_SIZE 0x40U //64 words
+
+#elif defined __AVR_ATmega169__
+#define SIG2 0x94
+#define SIG3 0x05
+#define PAGE_SIZE 0x40U //64 words
+
+#elif defined __AVR_ATmega8515__
+#define SIG2 0x93
+#define SIG3 0x06
+#define PAGE_SIZE 0x20U //32 words
+
+#elif defined __AVR_ATmega8535__
+#define SIG2 0x93
+#define SIG3 0x08
+#define PAGE_SIZE 0x20U //32 words
+#endif
+
+
+/* function prototypes */
+void putch(char);
+char getch(void);
+void getNch(uint8_t);
+void byte_response(uint8_t);
+void nothing_response(void);
+char gethex(void);
+void puthex(char);
+void flash_led(uint8_t);
+
+/* some variables */
+union address_union {
+ uint16_t word;
+ uint8_t byte[2];
+} address;
+
+union length_union {
+ uint16_t word;
+ uint8_t byte[2];
+} length;
+
+struct flags_struct {
+ unsigned eeprom : 1;
+ unsigned rampz : 1;
+} flags;
+
+uint8_t buff[256];
+uint8_t address_high;
+
+uint8_t pagesz=0x80;
+
+uint8_t i;
+uint8_t bootuart = 0;
+
+uint8_t error_count = 0;
+
+void (*app_start)(void) = 0x0000;
+
+
+/* main program starts here */
+int main(void)
+{
+ uint8_t ch,ch2;
+ uint16_t w;
+
+#ifdef WATCHDOG_MODS
+ ch = MCUSR;
+ MCUSR = 0;
+
+ WDTCSR |= _BV(WDCE) | _BV(WDE);
+ WDTCSR = 0;
+
+ // Check if the WDT was used to reset, in which case we dont bootload and skip straight to the code. woot.
+ if (! (ch & _BV(EXTRF))) // if its a not an external reset...
+ app_start(); // skip bootloader
+#else
+ asm volatile("nop\n\t");
+#endif
+
+ /* set pin direction for bootloader pin and enable pullup */
+ /* for ATmega128, two pins need to be initialized */
+#ifdef __AVR_ATmega128__
+ BL_DDR &= ~_BV(BL0);
+ BL_DDR &= ~_BV(BL1);
+ BL_PORT |= _BV(BL0);
+ BL_PORT |= _BV(BL1);
+#else
+ /* We run the bootloader regardless of the state of this pin. Thus, don't
+ put it in a different state than the other pins. --DAM, 070709
+ This also applies to Arduino Mega -- DC, 080930
+ BL_DDR &= ~_BV(BL);
+ BL_PORT |= _BV(BL);
+ */
+#endif
+
+
+#ifdef __AVR_ATmega128__
+ /* check which UART should be used for booting */
+ if(bit_is_clear(BL_PIN, BL0)) {
+ bootuart = 1;
+ }
+ else if(bit_is_clear(BL_PIN, BL1)) {
+ bootuart = 2;
+ }
+#endif
+
+#if defined __AVR_ATmega1280__
+ /* the mega1280 chip has four serial ports ... we could eventually use any of them, or not? */
+ /* however, we don't wanna confuse people, to avoid making a mess, we will stick to RXD0, TXD0 */
+ bootuart = 1;
+#endif
+
+ /* check if flash is programmed already, if not start bootloader anyway */
+ if(pgm_read_byte_near(0x0000) != 0xFF) {
+
+#ifdef __AVR_ATmega128__
+ /* no UART was selected, start application */
+ if(!bootuart) {
+ app_start();
+ }
+#else
+ /* check if bootloader pin is set low */
+ /* we don't start this part neither for the m8, nor m168 */
+ //if(bit_is_set(BL_PIN, BL)) {
+ // app_start();
+ // }
+#endif
+ }
+
+#ifdef __AVR_ATmega128__
+ /* no bootuart was selected, default to uart 0 */
+ if(!bootuart) {
+ bootuart = 1;
+ }
+#endif
+
+
+ /* initialize UART(s) depending on CPU defined */
+#if defined(__AVR_ATmega128__) || defined(__AVR_ATmega1280__)
+ if(bootuart == 1) {
+ UBRR0L = (uint8_t)(F_CPU/(BAUD_RATE*16L)-1);
+ UBRR0H = (F_CPU/(BAUD_RATE*16L)-1) >> 8;
+ UCSR0A = 0x00;
+ UCSR0C = 0x06;
+ UCSR0B = _BV(TXEN0)|_BV(RXEN0);
+ }
+ if(bootuart == 2) {
+ UBRR1L = (uint8_t)(F_CPU/(BAUD_RATE*16L)-1);
+ UBRR1H = (F_CPU/(BAUD_RATE*16L)-1) >> 8;
+ UCSR1A = 0x00;
+ UCSR1C = 0x06;
+ UCSR1B = _BV(TXEN1)|_BV(RXEN1);
+ }
+#elif defined __AVR_ATmega163__
+ UBRR = (uint8_t)(F_CPU/(BAUD_RATE*16L)-1);
+ UBRRHI = (F_CPU/(BAUD_RATE*16L)-1) >> 8;
+ UCSRA = 0x00;
+ UCSRB = _BV(TXEN)|_BV(RXEN);
+#elif defined(__AVR_ATmega168__) || defined(__AVR_ATmega328P__)
+
+#ifdef DOUBLE_SPEED
+ UCSR0A = (1<<U2X0); //Double speed mode USART0
+ UBRR0L = (uint8_t)(F_CPU/(BAUD_RATE*8L)-1);
+ UBRR0H = (F_CPU/(BAUD_RATE*8L)-1) >> 8;
+#else
+ UBRR0L = (uint8_t)(F_CPU/(BAUD_RATE*16L)-1);
+ UBRR0H = (F_CPU/(BAUD_RATE*16L)-1) >> 8;
+#endif
+
+ UCSR0B = (1<<RXEN0) | (1<<TXEN0);
+ UCSR0C = (1<<UCSZ00) | (1<<UCSZ01);
+
+ /* Enable internal pull-up resistor on pin D0 (RX), in order
+ to supress line noise that prevents the bootloader from
+ timing out (DAM: 20070509) */
+ DDRD &= ~_BV(PIND0);
+ PORTD |= _BV(PIND0);
+#elif defined __AVR_ATmega8__
+ /* m8 */
+ UBRRH = (((F_CPU/BAUD_RATE)/16)-1)>>8; // set baud rate
+ UBRRL = (((F_CPU/BAUD_RATE)/16)-1);
+ UCSRB = (1<<RXEN)|(1<<TXEN); // enable Rx & Tx
+ UCSRC = (1<<URSEL)|(1<<UCSZ1)|(1<<UCSZ0); // config USART; 8N1
+#else
+ /* m16,m32,m169,m8515,m8535 */
+ UBRRL = (uint8_t)(F_CPU/(BAUD_RATE*16L)-1);
+ UBRRH = (F_CPU/(BAUD_RATE*16L)-1) >> 8;
+ UCSRA = 0x00;
+ UCSRC = 0x06;
+ UCSRB = _BV(TXEN)|_BV(RXEN);
+#endif
+
+#if defined __AVR_ATmega1280__
+ /* Enable internal pull-up resistor on pin D0 (RX), in order
+ to supress line noise that prevents the bootloader from
+ timing out (DAM: 20070509) */
+ /* feature added to the Arduino Mega --DC: 080930 */
+ DDRE &= ~_BV(PINE0);
+ PORTE |= _BV(PINE0);
+#endif
+
+
+ /* set LED pin as output */
+ LED_DDR |= _BV(LED);
+
+
+ /* flash onboard LED to signal entering of bootloader */
+#if defined(__AVR_ATmega128__) || defined(__AVR_ATmega1280__)
+ // 4x for UART0, 5x for UART1
+ flash_led(NUM_LED_FLASHES + bootuart);
+#else
+ flash_led(NUM_LED_FLASHES);
+#endif
+
+ /* 20050803: by DojoCorp, this is one of the parts provoking the
+ system to stop listening, cancelled from the original */
+ //putch('\0');
+
+ /* forever loop */
+ for (;;) {
+
+ /* get character from UART */
+ ch = getch();
+
+ /* A bunch of if...else if... gives smaller code than switch...case ! */
+
+ /* Hello is anyone home ? */
+ if(ch=='0') {
+ nothing_response();
+ }
+
+
+ /* Request programmer ID */
+ /* Not using PROGMEM string due to boot block in m128 being beyond 64kB boundry */
+ /* Would need to selectively manipulate RAMPZ, and it's only 9 characters anyway so who cares. */
+ else if(ch=='1') {
+ if (getch() == ' ') {
+ putch(0x14);
+ putch('A');
+ putch('V');
+ putch('R');
+ putch(' ');
+ putch('I');
+ putch('S');
+ putch('P');
+ putch(0x10);
+ } else {
+ if (++error_count == MAX_ERROR_COUNT)
+ app_start();
+ }
+ }
+
+
+ /* AVR ISP/STK500 board commands DON'T CARE so default nothing_response */
+ else if(ch=='@') {
+ ch2 = getch();
+ if (ch2>0x85) getch();
+ nothing_response();
+ }
+
+
+ /* AVR ISP/STK500 board requests */
+ else if(ch=='A') {
+ ch2 = getch();
+ if(ch2==0x80) byte_response(HW_VER); // Hardware version
+ else if(ch2==0x81) byte_response(SW_MAJOR); // Software major version
+ else if(ch2==0x82) byte_response(SW_MINOR); // Software minor version
+ else if(ch2==0x98) byte_response(0x03); // Unknown but seems to be required by avr studio 3.56
+ else byte_response(0x00); // Covers various unnecessary responses we don't care about
+ }
+
+
+ /* Device Parameters DON'T CARE, DEVICE IS FIXED */
+ else if(ch=='B') {
+ getNch(20);
+ nothing_response();
+ }
+
+
+ /* Parallel programming stuff DON'T CARE */
+ else if(ch=='E') {
+ getNch(5);
+ nothing_response();
+ }
+
+
+ /* P: Enter programming mode */
+ /* R: Erase device, don't care as we will erase one page at a time anyway. */
+ else if(ch=='P' || ch=='R') {
+ nothing_response();
+ }
+
+
+ /* Leave programming mode */
+ else if(ch=='Q') {
+ nothing_response();
+#ifdef WATCHDOG_MODS
+ // autoreset via watchdog (sneaky!)
+ WDTCSR = _BV(WDE);
+ while (1); // 16 ms
+#endif
+ }
+
+
+ /* Set address, little endian. EEPROM in bytes, FLASH in words */
+ /* Perhaps extra address bytes may be added in future to support > 128kB FLASH. */
+ /* This might explain why little endian was used here, big endian used everywhere else. */
+ else if(ch=='U') {
+ address.byte[0] = getch();
+ address.byte[1] = getch();
+ nothing_response();
+ }
+
+
+ /* Universal SPI programming command, disabled. Would be used for fuses and lock bits. */
+ else if(ch=='V') {
+ if (getch() == 0x30) {
+ getch();
+ ch = getch();
+ getch();
+ if (ch == 0) {
+ byte_response(SIG1);
+ } else if (ch == 1) {
+ byte_response(SIG2);
+ } else {
+ byte_response(SIG3);
+ }
+ } else {
+ getNch(3);
+ byte_response(0x00);
+ }
+ }
+
+
+ /* Write memory, length is big endian and is in bytes */
+ else if(ch=='d') {
+ length.byte[1] = getch();
+ length.byte[0] = getch();
+ flags.eeprom = 0;
+ if (getch() == 'E') flags.eeprom = 1;
+ for (w=0;w<length.word;w++) {
+ buff[w] = getch(); // Store data in buffer, can't keep up with serial data stream whilst programming pages
+ }
+ if (getch() == ' ') {
+ if (flags.eeprom) { //Write to EEPROM one byte at a time
+ address.word <<= 1;
+ for(w=0;w<length.word;w++) {
+#if defined(__AVR_ATmega168__) || defined(__AVR_ATmega328P__)
+ while(EECR & (1<<EEPE));
+ EEAR = (uint16_t)(void *)address.word;
+ EEDR = buff[w];
+ EECR |= (1<<EEMPE);
+ EECR |= (1<<EEPE);
+#else
+ eeprom_write_byte((void *)address.word,buff[w]);
+#endif
+ address.word++;
+ }
+ }
+ else { //Write to FLASH one page at a time
+ if (address.byte[1]>127) address_high = 0x01; //Only possible with m128, m256 will need 3rd address byte. FIXME
+ else address_high = 0x00;
+#if defined(__AVR_ATmega128__) || defined(__AVR_ATmega1280__) || defined(__AVR_ATmega1281__)
+ RAMPZ = address_high;
+#endif
+ address.word = address.word << 1; //address * 2 -> byte location
+ /* if ((length.byte[0] & 0x01) == 0x01) length.word++; //Even up an odd number of bytes */
+ if ((length.byte[0] & 0x01)) length.word++; //Even up an odd number of bytes
+ cli(); //Disable interrupts, just to be sure
+#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega1281__)
+ while(bit_is_set(EECR,EEPE)); //Wait for previous EEPROM writes to complete
+#else
+ while(bit_is_set(EECR,EEWE)); //Wait for previous EEPROM writes to complete
+#endif
+ asm volatile(
+ "clr r17 \n\t" //page_word_count
+ "lds r30,address \n\t" //Address of FLASH location (in bytes)
+ "lds r31,address+1 \n\t"
+ "ldi r28,lo8(buff) \n\t" //Start of buffer array in RAM
+ "ldi r29,hi8(buff) \n\t"
+ "lds r24,length \n\t" //Length of data to be written (in bytes)
+ "lds r25,length+1 \n\t"
+ "length_loop: \n\t" //Main loop, repeat for number of words in block
+ "cpi r17,0x00 \n\t" //If page_word_count=0 then erase page
+ "brne no_page_erase \n\t"
+ "wait_spm1: \n\t"
+ "lds r16,%0 \n\t" //Wait for previous spm to complete
+ "andi r16,1 \n\t"
+ "cpi r16,1 \n\t"
+ "breq wait_spm1 \n\t"
+ "ldi r16,0x03 \n\t" //Erase page pointed to by Z
+ "sts %0,r16 \n\t"
+ "spm \n\t"
+#ifdef __AVR_ATmega163__
+ ".word 0xFFFF \n\t"
+ "nop \n\t"
+#endif
+ "wait_spm2: \n\t"
+ "lds r16,%0 \n\t" //Wait for previous spm to complete
+ "andi r16,1 \n\t"
+ "cpi r16,1 \n\t"
+ "breq wait_spm2 \n\t"
+
+ "ldi r16,0x11 \n\t" //Re-enable RWW section
+ "sts %0,r16 \n\t"
+ "spm \n\t"
+#ifdef __AVR_ATmega163__
+ ".word 0xFFFF \n\t"
+ "nop \n\t"
+#endif
+ "no_page_erase: \n\t"
+ "ld r0,Y+ \n\t" //Write 2 bytes into page buffer
+ "ld r1,Y+ \n\t"
+
+ "wait_spm3: \n\t"
+ "lds r16,%0 \n\t" //Wait for previous spm to complete
+ "andi r16,1 \n\t"
+ "cpi r16,1 \n\t"
+ "breq wait_spm3 \n\t"
+ "ldi r16,0x01 \n\t" //Load r0,r1 into FLASH page buffer
+ "sts %0,r16 \n\t"
+ "spm \n\t"
+
+ "inc r17 \n\t" //page_word_count++
+ "cpi r17,%1 \n\t"
+ "brlo same_page \n\t" //Still same page in FLASH
+ "write_page: \n\t"
+ "clr r17 \n\t" //New page, write current one first
+ "wait_spm4: \n\t"
+ "lds r16,%0 \n\t" //Wait for previous spm to complete
+ "andi r16,1 \n\t"
+ "cpi r16,1 \n\t"
+ "breq wait_spm4 \n\t"
+#ifdef __AVR_ATmega163__
+ "andi r30,0x80 \n\t" // m163 requires Z6:Z1 to be zero during page write
+#endif
+ "ldi r16,0x05 \n\t" //Write page pointed to by Z
+ "sts %0,r16 \n\t"
+ "spm \n\t"
+#ifdef __AVR_ATmega163__
+ ".word 0xFFFF \n\t"
+ "nop \n\t"
+ "ori r30,0x7E \n\t" // recover Z6:Z1 state after page write (had to be zero during write)
+#endif
+ "wait_spm5: \n\t"
+ "lds r16,%0 \n\t" //Wait for previous spm to complete
+ "andi r16,1 \n\t"
+ "cpi r16,1 \n\t"
+ "breq wait_spm5 \n\t"
+ "ldi r16,0x11 \n\t" //Re-enable RWW section
+ "sts %0,r16 \n\t"
+ "spm \n\t"
+#ifdef __AVR_ATmega163__
+ ".word 0xFFFF \n\t"
+ "nop \n\t"
+#endif
+ "same_page: \n\t"
+ "adiw r30,2 \n\t" //Next word in FLASH
+ "sbiw r24,2 \n\t" //length-2
+ "breq final_write \n\t" //Finished
+ "rjmp length_loop \n\t"
+ "final_write: \n\t"
+ "cpi r17,0 \n\t"
+ "breq block_done \n\t"
+ "adiw r24,2 \n\t" //length+2, fool above check on length after short page write
+ "rjmp write_page \n\t"
+ "block_done: \n\t"
+ "clr __zero_reg__ \n\t" //restore zero register
+#if defined __AVR_ATmega168__ || __AVR_ATmega328P__ || __AVR_ATmega128__ || __AVR_ATmega1280__ || __AVR_ATmega1281__
+ : "=m" (SPMCSR) : "M" (PAGE_SIZE) : "r0","r16","r17","r24","r25","r28","r29","r30","r31"
+#else
+ : "=m" (SPMCR) : "M" (PAGE_SIZE) : "r0","r16","r17","r24","r25","r28","r29","r30","r31"
+#endif
+ );
+ /* Should really add a wait for RWW section to be enabled, don't actually need it since we never */
+ /* exit the bootloader without a power cycle anyhow */
+ }
+ putch(0x14);
+ putch(0x10);
+ } else {
+ if (++error_count == MAX_ERROR_COUNT)
+ app_start();
+ }
+ }
+
+
+ /* Read memory block mode, length is big endian. */
+ else if(ch=='t') {
+ length.byte[1] = getch();
+ length.byte[0] = getch();
+#if defined(__AVR_ATmega128__) || defined(__AVR_ATmega1280__)
+ if (address.word>0x7FFF) flags.rampz = 1; // No go with m256, FIXME
+ else flags.rampz = 0;
+#endif
+ address.word = address.word << 1; // address * 2 -> byte location
+ if (getch() == 'E') flags.eeprom = 1;
+ else flags.eeprom = 0;
+ if (getch() == ' ') { // Command terminator
+ putch(0x14);
+ for (w=0;w < length.word;w++) { // Can handle odd and even lengths okay
+ if (flags.eeprom) { // Byte access EEPROM read
+#if defined(__AVR_ATmega168__) || defined(__AVR_ATmega328P__)
+ while(EECR & (1<<EEPE));
+ EEAR = (uint16_t)(void *)address.word;
+ EECR |= (1<<EERE);
+ putch(EEDR);
+#else
+ putch(eeprom_read_byte((void *)address.word));
+#endif
+ address.word++;
+ }
+ else {
+
+ if (!flags.rampz) putch(pgm_read_byte_near(address.word));
+#if defined(__AVR_ATmega128__) || defined(__AVR_ATmega1280__)
+ else putch(pgm_read_byte_far(address.word + 0x10000));
+ // Hmmmm, yuck FIXME when m256 arrvies
+#endif
+ address.word++;
+ }
+ }
+ putch(0x10);
+ }
+ }
+
+
+ /* Get device signature bytes */
+ else if(ch=='u') {
+ if (getch() == ' ') {
+ putch(0x14);
+ putch(SIG1);
+ putch(SIG2);
+ putch(SIG3);
+ putch(0x10);
+ } else {
+ if (++error_count == MAX_ERROR_COUNT)
+ app_start();
+ }
+ }
+
+
+ /* Read oscillator calibration byte */
+ else if(ch=='v') {
+ byte_response(0x00);
+ }
+
+
+#if defined MONITOR
+
+ /* here come the extended monitor commands by Erik Lins */
+
+ /* check for three times exclamation mark pressed */
+ else if(ch=='!') {
+ ch = getch();
+ if(ch=='!') {
+ ch = getch();
+ if(ch=='!') {
+ PGM_P welcome = "";
+#if defined(__AVR_ATmega128__) || defined(__AVR_ATmega1280__)
+ uint16_t extaddr;
+#endif
+ uint8_t addrl, addrh;
+
+#ifdef CRUMB128
+ welcome = "ATmegaBOOT / Crumb128 - (C) J.P.Kyle, E.Lins - 050815\n\r";
+#elif defined PROBOMEGA128
+ welcome = "ATmegaBOOT / PROBOmega128 - (C) J.P.Kyle, E.Lins - 050815\n\r";
+#elif defined SAVVY128
+ welcome = "ATmegaBOOT / Savvy128 - (C) J.P.Kyle, E.Lins - 050815\n\r";
+#elif defined __AVR_ATmega1280__
+ welcome = "ATmegaBOOT / Arduino Mega - (C) Arduino LLC - 090930\n\r";
+#endif
+
+ /* turn on LED */
+ LED_DDR |= _BV(LED);
+ LED_PORT &= ~_BV(LED);
+
+ /* print a welcome message and command overview */
+ for(i=0; welcome[i] != '\0'; ++i) {
+ putch(welcome[i]);
+ }
+
+ /* test for valid commands */
+ for(;;) {
+ putch('\n');
+ putch('\r');
+ putch(':');
+ putch(' ');
+
+ ch = getch();
+ putch(ch);
+
+ /* toggle LED */
+ if(ch == 't') {
+ if(bit_is_set(LED_PIN,LED)) {
+ LED_PORT &= ~_BV(LED);
+ putch('1');
+ } else {
+ LED_PORT |= _BV(LED);
+ putch('0');
+ }
+ }
+
+ /* read byte from address */
+ else if(ch == 'r') {
+ ch = getch(); putch(ch);
+ addrh = gethex();
+ addrl = gethex();
+ putch('=');
+ ch = *(uint8_t *)((addrh << 8) + addrl);
+ puthex(ch);
+ }
+
+ /* write a byte to address */
+ else if(ch == 'w') {
+ ch = getch(); putch(ch);
+ addrh = gethex();
+ addrl = gethex();
+ ch = getch(); putch(ch);
+ ch = gethex();
+ *(uint8_t *)((addrh << 8) + addrl) = ch;
+ }
+
+ /* read from uart and echo back */
+ else if(ch == 'u') {
+ for(;;) {
+ putch(getch());
+ }
+ }
+#if defined(__AVR_ATmega128__) || defined(__AVR_ATmega1280__)
+ /* external bus loop */
+ else if(ch == 'b') {
+ putch('b');
+ putch('u');
+ putch('s');
+ MCUCR = 0x80;
+ XMCRA = 0;
+ XMCRB = 0;
+ extaddr = 0x1100;
+ for(;;) {
+ ch = *(volatile uint8_t *)extaddr;
+ if(++extaddr == 0) {
+ extaddr = 0x1100;
+ }
+ }
+ }
+#endif
+
+ else if(ch == 'j') {
+ app_start();
+ }
+
+ } /* end of monitor functions */
+
+ }
+ }
+ }
+ /* end of monitor */
+#endif
+ else if (++error_count == MAX_ERROR_COUNT) {
+ app_start();
+ }
+ } /* end of forever loop */
+
+}
+
+
+char gethexnib(void) {
+ char a;
+ a = getch(); putch(a);
+ if(a >= 'a') {
+ return (a - 'a' + 0x0a);
+ } else if(a >= '0') {
+ return(a - '0');
+ }
+ return a;
+}
+
+
+char gethex(void) {
+ return (gethexnib() << 4) + gethexnib();
+}
+
+
+void puthex(char ch) {
+ char ah;
+
+ ah = ch >> 4;
+ if(ah >= 0x0a) {
+ ah = ah - 0x0a + 'a';
+ } else {
+ ah += '0';
+ }
+
+ ch &= 0x0f;
+ if(ch >= 0x0a) {
+ ch = ch - 0x0a + 'a';
+ } else {
+ ch += '0';
+ }
+
+ putch(ah);
+ putch(ch);
+}
+
+
+void putch(char ch)
+{
+#if defined(__AVR_ATmega128__) || defined(__AVR_ATmega1280__)
+ if(bootuart == 1) {
+ while (!(UCSR0A & _BV(UDRE0)));
+ UDR0 = ch;
+ }
+ else if (bootuart == 2) {
+ while (!(UCSR1A & _BV(UDRE1)));
+ UDR1 = ch;
+ }
+#elif defined(__AVR_ATmega168__) || defined(__AVR_ATmega328P__)
+ while (!(UCSR0A & _BV(UDRE0)));
+ UDR0 = ch;
+#else
+ /* m8,16,32,169,8515,8535,163 */
+ while (!(UCSRA & _BV(UDRE)));
+ UDR = ch;
+#endif
+}
+
+
+char getch(void)
+{
+#if defined(__AVR_ATmega128__) || defined(__AVR_ATmega1280__)
+ uint32_t count = 0;
+ if(bootuart == 1) {
+ while(!(UCSR0A & _BV(RXC0))) {
+ /* 20060803 DojoCorp:: Addon coming from the previous Bootloader*/
+ /* HACKME:: here is a good place to count times*/
+ count++;
+ if (count > MAX_TIME_COUNT)
+ app_start();
+ }
+
+ return UDR0;
+ }
+ else if(bootuart == 2) {
+ while(!(UCSR1A & _BV(RXC1))) {
+ /* 20060803 DojoCorp:: Addon coming from the previous Bootloader*/
+ /* HACKME:: here is a good place to count times*/
+ count++;
+ if (count > MAX_TIME_COUNT)
+ app_start();
+ }
+
+ return UDR1;
+ }
+ return 0;
+#elif defined(__AVR_ATmega168__) || defined(__AVR_ATmega328P__)
+ uint32_t count = 0;
+ while(!(UCSR0A & _BV(RXC0))){
+ /* 20060803 DojoCorp:: Addon coming from the previous Bootloader*/
+ /* HACKME:: here is a good place to count times*/
+ count++;
+ if (count > MAX_TIME_COUNT)
+ app_start();
+ }
+ return UDR0;
+#else
+ /* m8,16,32,169,8515,8535,163 */
+ uint32_t count = 0;
+ while(!(UCSRA & _BV(RXC))){
+ /* 20060803 DojoCorp:: Addon coming from the previous Bootloader*/
+ /* HACKME:: here is a good place to count times*/
+ count++;
+ if (count > MAX_TIME_COUNT)
+ app_start();
+ }
+ return UDR;
+#endif
+}
+
+
+void getNch(uint8_t count)
+{
+ while(count--) {
+#if defined(__AVR_ATmega128__) || defined(__AVR_ATmega1280__)
+ if(bootuart == 1) {
+ while(!(UCSR0A & _BV(RXC0)));
+ UDR0;
+ }
+ else if(bootuart == 2) {
+ while(!(UCSR1A & _BV(RXC1)));
+ UDR1;
+ }
+#elif defined(__AVR_ATmega168__) || defined(__AVR_ATmega328P__)
+ getch();
+#else
+ /* m8,16,32,169,8515,8535,163 */
+ /* 20060803 DojoCorp:: Addon coming from the previous Bootloader*/
+ //while(!(UCSRA & _BV(RXC)));
+ //UDR;
+ getch(); // need to handle time out
+#endif
+ }
+}
+
+
+void byte_response(uint8_t val)
+{
+ if (getch() == ' ') {
+ putch(0x14);
+ putch(val);
+ putch(0x10);
+ } else {
+ if (++error_count == MAX_ERROR_COUNT)
+ app_start();
+ }
+}
+
+
+void nothing_response(void)
+{
+ if (getch() == ' ') {
+ putch(0x14);
+ putch(0x10);
+ } else {
+ if (++error_count == MAX_ERROR_COUNT)
+ app_start();
+ }
+}
+
+void flash_led(uint8_t count)
+{
+ while (count--) {
+ LED_PORT |= _BV(LED);
+ _delay_ms(100);
+ LED_PORT &= ~_BV(LED);
+ _delay_ms(100);
+ }
+}
+
+
+/* end of file ATmegaBOOT.c */
diff --git a/test/ardmake/hardware/bootloaders/atmega/ATmegaBOOT_168_atmega1280.hex b/test/ardmake/hardware/bootloaders/atmega/ATmegaBOOT_168_atmega1280.hex new file mode 100644 index 0000000..f16e877 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/atmega/ATmegaBOOT_168_atmega1280.hex @@ -0,0 +1,245 @@ +:020000021000EC
+:10F000000C9472F80C9492F80C9492F80C9492F878
+:10F010000C9492F80C9492F80C9492F80C9492F848
+:10F020000C9492F80C9492F80C9492F80C9492F838
+:10F030000C9492F80C9492F80C9492F80C9492F828
+:10F040000C9492F80C9492F80C9492F80C9492F818
+:10F050000C9492F80C9492F80C9492F80C9492F808
+:10F060000C9492F80C9492F80C9492F80C9492F8F8
+:10F070000C9492F80C9492F80C9492F80C9492F8E8
+:10F080000C9492F80C9492F80C9492F80C9492F8D8
+:10F090000C9492F80C9492F80C9492F80C9492F8C8
+:10F0A0000C9492F80C9492F80C9492F80C9492F8B8
+:10F0B0000C9492F80C9492F80C9492F80C9492F8A8
+:10F0C0000C9492F80C9492F80C9492F80C9492F898
+:10F0D0000C9492F80C9492F80C9492F80C9492F888
+:10F0E0000C9492F811241FBECFEFD1E2DEBFCDBF4A
+:10F0F00012E0A0E0B2E0EEEDFEEF01E00BBF02C0D7
+:10F1000007900D92A833B107D9F71BBE13E0A8E30F
+:10F11000B2E001C01D92A334B107E1F70E9412FAD8
+:10F120000C946DFF0C9400F8982F959595959595F6
+:10F130009595905D8F708A301CF1282F295A809107
+:10F140003802813019F0823071F008958091C0004A
+:10F1500085FFFCCF9093C6008091C00085FFFCCF57
+:10F160002093C60008958091C80085FFFCCF90933E
+:10F17000CE008091C80085FFFCCF2093CE0008957B
+:10F18000282F205DDCCF982F80913802813019F034
+:10F19000823041F008958091C00085FFFCCF9093AC
+:10F1A000C60008958091C80085FFFCCF9093CE00E3
+:10F1B0000895EF92FF920F931F9380913802813050
+:10F1C00069F1823031F080E01F910F91FF90EF9054
+:10F1D0000895EE24FF2487018091C80087FD17C0A1
+:10F1E0000894E11CF11C011D111D81E4E81682E464
+:10F1F000F8068FE0080780E0180770F3E0913A0204
+:10F20000F0913B0209958091C80087FFE9CF80917A
+:10F21000CE001F910F91FF90EF900895EE24FF24F0
+:10F2200087018091C00087FD17C00894E11CF11C84
+:10F23000011D111D81E4E81682E4F8068FE008073D
+:10F2400080E0180770F3E0913A02F0913B020995D3
+:10F250008091C00087FFE9CF8091C6001F910F9178
+:10F26000FF90EF9008950E94D9F8982F809138026E
+:10F27000813049F0823091F091366CF490330CF08B
+:10F280009053892F08958091C00085FFFCCF909303
+:10F29000C60091369CF39755892F08958091C80038
+:10F2A00085FFFCCF9093CE00E7CF1F930E9433F9E8
+:10F2B000182F0E9433F91295107F810F1F91089526
+:10F2C000982F20913802992339F0213031F02230E3
+:10F2D00061F091509923C9F708958091C00087FF8C
+:10F2E000FCCF8091C6009150F5CF8091C80087FF78
+:10F2F000FCCF8091CE009150EDCF1F93182F0E942C
+:10F30000D9F8803249F0809139028F5F80933902B9
+:10F31000853091F11F910895809138028130B9F0C4
+:10F320008230C1F78091C80085FFFCCF84E18093D3
+:10F33000CE008091C80085FFFCCF1093CE00809155
+:10F34000C80085FFFCCF80E18093CE00E3CF8091A1
+:10F35000C00085FFFCCF84E18093C6008091C0008F
+:10F3600085FFFCCF1093C6008091C00085FFFCCFC5
+:10F3700080E18093C600CECFE0913A02F0913B024B
+:10F3800009951F9108950E94D9F8803241F080912B
+:10F3900039028F5F80933902853029F10895809179
+:10F3A0003802813089F08230C9F78091C80085FF2A
+:10F3B000FCCF84E18093CE008091C80085FFFCCF14
+:10F3C00080E18093CE0008958091C00085FFFCCF3E
+:10F3D00084E18093C6008091C00085FFFCCF80E16E
+:10F3E0008093C6000895E0913A02F0913B0209959E
+:10F3F000089540E951E08823A1F02F9A28EE33E0E8
+:10F40000FA013197F1F721503040D1F72F9828EECB
+:10F4100033E0FA013197F1F721503040D1F78150B4
+:10F4200061F708952F923F924F925F926F927F9271
+:10F430008F929F92AF92BF92CF92DF92EF92FF9204
+:10F440000F931F93CF93DF93000081E080933802E6
+:10F4500080E18093C4001092C5001092C00086E045
+:10F460008093C20088E18093C1006898709A279ABF
+:10F4700081E00E94F9F9E4E1EE2E7EE1D72E67E902
+:10F48000C62E53E0B52E40E1A42E9924939431E486
+:10F49000832E26E5722E92E5692E80E2582E09E42D
+:10F4A000402E13E5312EB0E52B2E0E94D9F8803383
+:10F4B000C9F1813309F452C0803409F4C8C08134E1
+:10F4C00009F4EAC0823489F1853409F4CAC0803570
+:10F4D00049F1823539F1813529F1853509F4ECC0DE
+:10F4E000863509F409C1843609F428C1843709F442
+:10F4F000ABC1853709F473C2863709F4D9C08132AC
+:10F5000009F4B7C2809139028F5F80933902853048
+:10F5100061F6E0913A02F0913B0209950E94D9F818
+:10F52000803339F60E94C3F9C0CF2091380293E1AD
+:10F5300005C0223061F09923A9F391502130C9F719
+:10F540008091C00087FFFCCF8091C600F4CF8091EE
+:10F55000C80087FFFCCF8091CE00EDCF0E94D9F884
+:10F56000803281F6809138028130D1F1823009F009
+:10F570009CCF8091C80085FFFCCFE092CE008091A7
+:10F58000C80085FFFCCF8092CE008091C80085FF27
+:10F59000FCCF7092CE008091C80085FFFCCF6092B6
+:10F5A000CE008091C80085FFFCCF5092CE008091A4
+:10F5B000C80085FFFCCF4092CE008091C80085FF37
+:10F5C000FCCF3092CE008091C80085FFFCCF209206
+:10F5D000CE008091C80085FFFCCFA092CE0065CF01
+:10F5E0008091C00085FFFCCFE092C6008091C000F2
+:10F5F00085FFFCCF8092C6008091C00085FFFCCFC4
+:10F600007092C6008091C00085FFFCCF6092C6005A
+:10F610008091C00085FFFCCF5092C6008091C00051
+:10F6200085FFFCCF4092C6008091C00085FFFCCFD3
+:10F630003092C6008091C00085FFFCCF2092C600AA
+:10F640008091C00085FFFCCFA092C6002ECF0E9403
+:10F65000D9F8863808F466CF0E94D9F80E94C3F919
+:10F6600024CF2091380294E0213041F0223069F01B
+:10F67000992309F457CF91502130C1F78091C000F0
+:10F6800087FFFCCF8091C600F3CF8091C80087FF31
+:10F69000FCCF8091CE00ECCF0E94D9F8803841F1A8
+:10F6A000813809F447C0823809F4CAC08839E1F0CA
+:10F6B00080E00E947DF9F9CE0E94D9F880933C0247
+:10F6C0000E94D9F880933D020E94C3F9EECE0E94B9
+:10F6D000D9F80E94D9F8182F0E94D9F8112309F4FB
+:10F6E0007EC2113009F40AC283E00E947DF9DDCEAA
+:10F6F00082E00E947DF9D9CE0E94D9F8803339F397
+:10F700002091380292E0213039F0223061F09923C3
+:10F7100079F291502130C9F78091C00087FFFCCF6A
+:10F720008091C600F4CF8091C80087FFFCCF809104
+:10F73000CE00EDCF81E00E947DF9B7CE0E94D9F8CE
+:10F7400080933F030E94D9F880933E038091420347
+:10F750008E7F809342030E94D9F8853409F4B3C1A7
+:10F7600080913E0390913F03892B89F000E010E0E7
+:10F770000E94D9F8F801E25CFD4F80830F5F1F4FB4
+:10F7800080913E0390913F030817190788F30E9468
+:10F79000D9F8803209F0B6CE8091420380FFB2C121
+:10F7A00040913C0250913D02440F551F50933D0241
+:10F7B00040933C0260913E0370913F0361157105D7
+:10F7C000F1F080E090E09A01280F391FFC01E25C23
+:10F7D000FD4FE081F999FECF1FBA32BD21BDE0BDDA
+:10F7E0000FB6F894FA9AF99A0FBE01968617970702
+:10F7F00050F3460F571F50933D0240933C028091B7
+:10F800003802813081F0823009F04FCE8091C800FB
+:10F8100085FFFCCFE092CE008091C80085FFFCCF31
+:10F82000A092CE0042CE8091C00085FFFCCFE09236
+:10F83000C6008091C00085FFFCCFA092C60035CEE7
+:10F8400080E10E947DF931CE0E94D9F880933F0378
+:10F850000E94D9F880933E0320913C0230913D02F2
+:10F8600037FD46C1809142038D7F80934203220F72
+:10F87000331F30933D0220933C020E94D9F8853417
+:10F8800009F430C1809142038E7F809342030E942D
+:10F89000D9F8803209F009CE60913802613009F45C
+:10F8A0006FC0623009F473C000913E0310913F03B2
+:10F8B0000115110509F440C080914203782F717041
+:10F8C000F82EF69481E0F82240913C0250913D02DE
+:10F8D00020E030E013C0FF2009F060C0FA019491ED
+:10F8E000613009F43BC0623009F441C0CA0101969D
+:10F8F0002F5F3F4FAC0120173107D0F4772359F326
+:10F90000F999FECF52BD41BDF89A90B56130F9F03A
+:10F91000623061F78091C80085FFFCCF9093CE00E4
+:10F92000CA0101962F5F3F4FAC012017310730F31A
+:10F9300090933D0280933C02613009F4CAC062306A
+:10F9400009F0B3CD8091C80085FFFCCF46CE8091F1
+:10F95000C00085FFFCCF9093C600C8CF8091C00047
+:10F9600085FDF9CF8091C00085FFF8CFF4CF80915D
+:10F97000C80085FDD3CF8091C80085FFF8CFCECFDA
+:10F980008091C00085FFFCCFE092C6008DCF8091B2
+:10F99000C80085FFFCCFE092CE0086CFCA01A0E070
+:10F9A000B0E080509040AF4FBF4FABBFFC0197918C
+:10F9B000613061F0623009F099CF8091C80085FD17
+:10F9C000ADCF8091C80085FFF8CFA8CF8091C0004F
+:10F9D00085FDC1CF8091C00085FFF8CFBCCF0E94CC
+:10F9E000D9F8803209F08ECD80913802813011F142
+:10F9F000823009F05ACD8091C80085FFFCCFE0929B
+:10FA0000CE008091C80085FFFCCFD092CE008091BF
+:10FA1000C80085FFFCCFC092CE008091C80085FF52
+:10FA2000FCCFB092CE008091C80085FFFCCFA092A1
+:10FA3000CE003BCD8091C00085FFFCCFE092C60098
+:10FA40008091C00085FFFCCFD092C6008091C0009D
+:10FA500085FFFCCFC092C6008091C00085FFFCCF1F
+:10FA6000B092C6008091C00085FFFCCFA092C60076
+:10FA70001CCD0E94D9F8813209F017CD0E94D9F827
+:10FA8000813209F012CD279A2F98109240032091CD
+:10FA90003802E1E491E00EC0223009F4A4C0909352
+:10FAA0004003E92FF0E0E050FE4FE0819F5FEE233E
+:10FAB00009F4A0C0213081F78091C00085FFFCCF00
+:10FAC000E093C600ECCF80914203816080934203B3
+:10FAD00047CE8091C00085FDB7CD8091C00085FFE5
+:10FAE000F8CFB2CD80914203816080934203CFCEA4
+:10FAF00080914203826080934203B9CE87E90E94DD
+:10FB00007DF9D3CC80913D028823880F880B892111
+:10FB1000809341038BBF80913C0290913D02880FFE
+:10FB2000991F90933D0280933C0280913E0380FF99
+:10FB300009C080913E0390913F03019690933F034B
+:10FB400080933E03F894F999FECF1127E0913C028F
+:10FB5000F0913D02CEE3D2E080913E0390913F03CD
+:10FB6000103091F40091570001700130D9F303E097
+:10FB700000935700E8950091570001700130D9F3C8
+:10FB800001E100935700E895099019900091570002
+:10FB900001700130D9F301E000935700E895139507
+:10FBA000103898F011270091570001700130D9F3F7
+:10FBB00005E000935700E89500915700017001306F
+:10FBC000D9F301E100935700E8953296029709F0C6
+:10FBD000C7CF103011F00296E5CF112410CE8EE180
+:10FBE0000E947DF962CC8091C80085FFFCCFE09334
+:10FBF000CE0055CF7AE0B72E6DE0A62E5AE3952EB3
+:10FC000040E2842E3DE3732E90E3692E81E3582E6B
+:10FC1000213009F442C0223009F45FC00E94D9F8B3
+:10FC2000982F20913802213089F1223009F44EC0FA
+:10FC3000943709F46BC0923709F405C1973709F47A
+:10FC40007BC0953799F0923609F4BDC09A3601F71A
+:10FC5000E0913A02F0913B02099520913802D8CF09
+:10FC60008091C00085FFFCCF9093C6000E94D9F818
+:10FC7000982F80913802813099F38230B9F78091C2
+:10FC8000C80085FFFCCF9093CE00F0CF8091C000DC
+:10FC900085FFFCCF9093C600CBCF8091C00085FF3D
+:10FCA000FCCFB092C6008091C00085FFFCCFA0922F
+:10FCB000C6008091C00085FFFCCF9092C600809165
+:10FCC000C00085FFFCCF8092C600A8CF8091C800FD
+:10FCD00085FFFCCF9093CE00ABCF8091C80085FF0D
+:10FCE000FCCFB092CE008091C80085FFFCCFA092DF
+:10FCF000CE008091C80085FFFCCF9092CE0080910D
+:10FD0000C80085FFFCCF8092CE0088CF1F9947C0E6
+:10FD10002F9A213051F0223009F07ACF8091C8001B
+:10FD200085FFFCCF6092CE0073CF8091C00085FF2D
+:10FD3000FCCF6092C6006CCF0E94D9F8982F8091BA
+:10FD400038028130F1F0823009F4ABC00E9455F9DD
+:10FD5000082F0E9455F9182F0E94D9F8982F8091EA
+:10FD600038028130A9F0823009F4A2C00E9455F90E
+:10FD7000D02ECC24F601E10FF11D808320913802B2
+:10FD800047CF8091C00085FFFCCF9093C600DECFA7
+:10FD90008091C00085FFFCCF9093C600E7CF2F98DD
+:10FDA000213051F0223009F033CF8091C80085FF17
+:10FDB000FCCF5092CE002CCF8091C00085FFFCCFAD
+:10FDC0005092C60025CF213041F1223081F080E8E9
+:10FDD00085BF109274001092750080E091E1FC01E3
+:10FDE000819180E091E13097D1F3CF01F8CF8091FC
+:10FDF000C80085FFFCCF82E68093CE008091C800CA
+:10FE000085FFFCCF85E78093CE008091C80085FFF9
+:10FE1000FCCF83E78093CE00DACF8091C00085FFCE
+:10FE2000FCCF82E68093C6008091C00085FFFCCFA6
+:10FE300085E78093C6008091C00085FFFCCF83E7F3
+:10FE40008093C600C4CF0E94D9F8982F80913802C1
+:10FE50008130C9F08230D1F10E9455F9182F0E94EB
+:10FE600055F9982F809138028130A1F0823039F114
+:10FE7000F12EEE24F701E90FF11D80810E9494F824
+:10FE800020913802C5CE8091C00085FFFCCF9093B1
+:10FE9000C600E2CF8091C00085FFFCCF7092C60003
+:10FEA000E7CF8091C80085FFFCCF9093CE004ECF66
+:10FEB0008091C80085FFFCCF9093CE0057CF8091F2
+:10FEC000C80085FFFCCF7092CE00D2CF8091C800D1
+:0EFED00085FFFCCF9093CE00BFCFF894FFCFFC
+:10FEDE0041546D656761424F4F54202F204172642B
+:10FEEE0075696E6F204D656761202D20284329208E
+:10FEFE0041726475696E6F204C4C43202D20303951
+:08FF0E00303933300A0D008088
+:040000031000F000F9
+:00000001FF
diff --git a/test/ardmake/hardware/bootloaders/atmega/ATmegaBOOT_168_atmega328.hex b/test/ardmake/hardware/bootloaders/atmega/ATmegaBOOT_168_atmega328.hex new file mode 100644 index 0000000..43a8b30 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/atmega/ATmegaBOOT_168_atmega328.hex @@ -0,0 +1,125 @@ +:107800000C94343C0C94513C0C94513C0C94513CE1
+:107810000C94513C0C94513C0C94513C0C94513CB4
+:107820000C94513C0C94513C0C94513C0C94513CA4
+:107830000C94513C0C94513C0C94513C0C94513C94
+:107840000C94513C0C94513C0C94513C0C94513C84
+:107850000C94513C0C94513C0C94513C0C94513C74
+:107860000C94513C0C94513C11241FBECFEFD8E036
+:10787000DEBFCDBF11E0A0E0B1E0ECE9FFE702C060
+:1078800005900D92A230B107D9F712E0A2E0B1E065
+:1078900001C01D92AD30B107E1F70E942D3D0C945F
+:1078A000CC3F0C94003C982F959595959595959582
+:1078B000905D8F708A307CF0282F295A8091C0000B
+:1078C00085FFFCCF9093C6008091C00085FFFCCF60
+:1078D0002093C6000895282F205DF0CF982F809127
+:1078E000C00085FFFCCF9093C6000895EF92FF92F1
+:1078F0000F931F93EE24FF2487018091C00087FD22
+:1079000017C00894E11CF11C011D111D81E4E8164B
+:1079100082E4F8068FE0080780E0180770F3E09132
+:107920000401F091050109958091C00087FFE9CF1E
+:107930008091C6001F910F91FF90EF9008950E94D3
+:10794000763C982F8091C00085FFFCCF9093C600B5
+:1079500091362CF490330CF09053892F089597555D
+:10796000892F08951F930E949F3C182F0E949F3CCF
+:107970001295107F810F1F9108951F93182F882350
+:1079800021F00E94763C1150E1F71F9108951F935A
+:10799000182F0E94763C803249F0809103018F5F5E
+:1079A000809303018530C1F01F9108958091C0003C
+:1079B00085FFFCCF84E18093C6008091C00085FFE5
+:1079C000FCCF1093C6008091C00085FFFCCF80E102
+:1079D0008093C6001F910895E0910401F091050184
+:1079E00009951F9108950E94763C803241F0809164
+:1079F00003018F5F80930301853081F008958091AA
+:107A0000C00085FFFCCF84E18093C6008091C00058
+:107A100085FFFCCF80E18093C6000895E0910401CA
+:107A2000F09105010995089540E951E08823A1F0FE
+:107A30002D9A28EE33E0FA013197F1F721503040CA
+:107A4000D1F72D9828EE33E0FA013197F1F7215064
+:107A50003040D1F7815061F708953F924F925F9285
+:107A60006F927F928F929F92AF92BF92CF92DF924E
+:107A7000EF92FF920F931F93CF93DF93000080E16B
+:107A80008093C4001092C50088E18093C10086E015
+:107A90008093C2005098589A259A81E00E94143D24
+:107AA00024E1F22E9EE1E92E85E9D82E0FE0C02ECA
+:107AB00010E1B12EAA24A394B1E49B2EA6E58A2E50
+:107AC000F2E57F2EE0E26E2E79E4572E63E5462E36
+:107AD00050E5352E0E94763C8033B1F18133B9F107
+:107AE000803409F46FC0813409F476C0823409F41B
+:107AF00085C0853409F488C0803531F1823521F1A3
+:107B0000813511F1853509F485C0863509F48DC0BC
+:107B1000843609F496C0843709F403C1853709F423
+:107B200072C1863709F466C0809103018F5F80932C
+:107B30000301853079F6E0910401F0910501099582
+:107B40000E94763C803351F60E94F33CC3CF0E94E2
+:107B5000763C803249F78091C00085FFFCCFF092DF
+:107B6000C6008091C00085FFFCCF9092C600809136
+:107B7000C00085FFFCCF8092C6008091C00085FFC9
+:107B8000FCCF7092C6008091C00085FFFCCF609250
+:107B9000C6008091C00085FFFCCF5092C600809146
+:107BA000C00085FFFCCF4092C6008091C00085FFD9
+:107BB000FCCF3092C6008091C00085FFFCCFB09210
+:107BC000C60088CF0E94763C863808F4BDCF0E945C
+:107BD000763C0E94F33C7ECF0E94763C803809F4CC
+:107BE0009CC0813809F40BC1823809F43CC1883942
+:107BF00009F48FC080E00E94C73C6CCF84E10E94F2
+:107C0000BD3C0E94F33C66CF85E00E94BD3C0E94D3
+:107C1000F33C60CF0E94763C809306010E94763C44
+:107C2000809307010E94F33C55CF0E94763C80333D
+:107C300009F41DC183E00E94BD3C80E00E94C73C66
+:107C400049CF0E94763C809309020E94763C809343
+:107C5000080280910C028E7F80930C020E94763C79
+:107C6000853409F415C18091080290910902892B8D
+:107C700089F000E010E00E94763CF801E85FFE4FDA
+:107C800080830F5F1F4F80910802909109020817AF
+:107C9000190788F30E94763C803209F045CF809125
+:107CA0000C0280FF01C16091060170910701660F0F
+:107CB000771F7093070160930601A0910802B091AD
+:107CC00009021097C9F0E8E0F1E09B01AD014E0F09
+:107CD0005F1FF999FECF32BD21BD819180BDFA9A17
+:107CE000F99A2F5F3F4FE417F50799F76A0F7B1F4B
+:107CF00070930701609306018091C00085FFFCCF5F
+:107D0000F092C6008091C00085FFFCCFB092C60003
+:107D1000E1CE83E00E94C73CDDCE82E00E94C73CFA
+:107D2000D9CE0E94763C809309020E94763C8093D3
+:107D300008028091060190910701880F991F909386
+:107D40000701809306010E94763C853409F4A6C0A1
+:107D500080910C028E7F80930C020E94763C8032D0
+:107D600009F0B8CE8091C00085FFFCCFF092C6002C
+:107D7000609108027091090261157105B9F140E046
+:107D800050E080910C02A82FA170B82FB27011C0E2
+:107D9000BB2309F45CC0E0910601F0910701319624
+:107DA000F0930701E09306014F5F5F4F46175707B7
+:107DB000E8F4AA2369F3F999FECF209106013091E6
+:107DC000070132BD21BDF89A90B58091C00085FFB2
+:107DD000FCCF9093C6002F5F3F4F30930701209355
+:107DE00006014F5F5F4F4617570718F38091C00099
+:107DF00085FDE5CE8091C00085FFF8CFE0CE81E023
+:107E00000E94C73C67CE0E94763C803209F08CCE3F
+:107E10008091C00085FFFCCFF092C6008091C00029
+:107E200085FFFCCFE092C6008091C00085FFFCCFAB
+:107E3000D092C6008091C00085FFFCCFC092C600E2
+:107E40008091C00085FFFCCFB092C60043CEE09188
+:107E50000601F091070194918091C00085FFFCCF4D
+:107E60009093C6009CCF80E10E94C73C33CE0E9415
+:107E7000763C0E94763C182F0E94763C112309F430
+:107E800083C0113009F484C08FE00E94C73C22CE29
+:107E900080910C02816080930C02E5CE80910C02EF
+:107EA000816080930C0259CF809107018823880F4D
+:107EB000880B8A2180930B02809106019091070123
+:107EC000880F991F90930701809306018091080203
+:107ED00080FF09C080910802909109020196909359
+:107EE000090280930802F894F999FECF1127E091D6
+:107EF0000601F0910701C8E0D1E08091080290915D
+:107F00000902103091F40091570001700130D9F34B
+:107F100003E000935700E89500915700017001308D
+:107F2000D9F301E100935700E89509901990009169
+:107F3000570001700130D9F301E000935700E89534
+:107F40001395103498F011270091570001700130FB
+:107F5000D9F305E000935700E895009157000170B0
+:107F60000130D9F301E100935700E895329602976A
+:107F700009F0C7CF103011F00296E5CF112480919F
+:107F8000C00085FFB9CEBCCE8EE10E94C73CA2CD19
+:0C7F900085E90E94C73C9ECDF894FFCF0D
+:027F9C00800063
+:040000030000780081
+:00000001FF
diff --git a/test/ardmake/hardware/bootloaders/atmega/ATmegaBOOT_168_atmega328_pro_8MHz.hex b/test/ardmake/hardware/bootloaders/atmega/ATmegaBOOT_168_atmega328_pro_8MHz.hex new file mode 100644 index 0000000..9753e2e --- /dev/null +++ b/test/ardmake/hardware/bootloaders/atmega/ATmegaBOOT_168_atmega328_pro_8MHz.hex @@ -0,0 +1,124 @@ +:107800000C94343C0C94513C0C94513C0C94513CE1
+:107810000C94513C0C94513C0C94513C0C94513CB4
+:107820000C94513C0C94513C0C94513C0C94513CA4
+:107830000C94513C0C94513C0C94513C0C94513C94
+:107840000C94513C0C94513C0C94513C0C94513C84
+:107850000C94513C0C94513C0C94513C0C94513C74
+:107860000C94513C0C94513C11241FBECFEFD8E036
+:10787000DEBFCDBF11E0A0E0B1E0EAE8FFE702C063
+:1078800005900D92A230B107D9F712E0A2E0B1E065
+:1078900001C01D92AD30B107E1F70E942D3D0C945F
+:1078A000C33F0C94003C982F95959595959595958B
+:1078B000905D8F708A307CF0282F295A8091C0000B
+:1078C00085FFFCCF9093C6008091C00085FFFCCF60
+:1078D0002093C6000895282F205DF0CF982F809127
+:1078E000C00085FFFCCF9093C6000895EF92FF92F1
+:1078F0000F931F93EE24FF2487018091C00087FD22
+:1079000017C00894E11CF11C011D111D81E2E8164D
+:1079100081EAF80687E0080780E0180770F3E09135
+:107920000401F091050109958091C00087FFE9CF1E
+:107930008091C6001F910F91FF90EF9008950E94D3
+:10794000763C982F8091C00085FFFCCF9093C600B5
+:1079500091362CF490330CF09053892F089597555D
+:10796000892F08951F930E949F3C182F0E949F3CCF
+:107970001295107F810F1F9108951F93182F882350
+:1079800021F00E94763C1150E1F71F9108951F935A
+:10799000182F0E94763C803249F0809103018F5F5E
+:1079A000809303018530C1F01F9108958091C0003C
+:1079B00085FFFCCF84E18093C6008091C00085FFE5
+:1079C000FCCF1093C6008091C00085FFFCCF80E102
+:1079D0008093C6001F910895E0910401F091050184
+:1079E00009951F9108950E94763C803241F0809164
+:1079F00003018F5F80930301853081F008958091AA
+:107A0000C00085FFFCCF84E18093C6008091C00058
+:107A100085FFFCCF80E18093C6000895E0910401CA
+:107A2000F09105010995089548EC50E08823A1F0F4
+:107A30002D9A28EE33E0FA013197F1F721503040CA
+:107A4000D1F72D9828EE33E0FA013197F1F7215064
+:107A50003040D1F7815061F708953F924F925F9285
+:107A60006F927F928F929F92AF92BF92CF92DF924E
+:107A7000EF92FF920F931F93CF93DF93000082E06A
+:107A80008093C00080E18093C4001092C50088E11B
+:107A90008093C10086E08093C2005098589A259A3E
+:107AA00081E00E94143D24E1F22E9EE1E92E85E959
+:107AB000D82E0FE0C02E10E1B12EAA24A394B1E479
+:107AC0009B2EA6E58A2EF2E57F2EE0E26E2E79E46B
+:107AD000572E63E5462E50E5352E0E94763C8033C6
+:107AE000B1F18133B9F1803409F46FC0813409F404
+:107AF00076C0823409F485C0853409F488C08035A5
+:107B000031F1823521F1813511F1853509F485C0D6
+:107B1000863509F48DC0843609F496C0843709F49B
+:107B200003C1853709F472C1863709F466C08091B4
+:107B300003018F5F80930301853079F6E0910401A2
+:107B4000F091050109950E94763C803351F60E9420
+:107B5000F33CC3CF0E94763C803249F78091C0004D
+:107B600085FFFCCFF092C6008091C00085FFFCCF5E
+:107B70009092C6008091C00085FFFCCF8092C60025
+:107B80008091C00085FFFCCF7092C6008091C0003C
+:107B900085FFFCCF6092C6008091C00085FFFCCFBE
+:107BA0005092C6008091C00085FFFCCF4092C60075
+:107BB0008091C00085FFFCCF3092C6008091C0004C
+:107BC00085FFFCCFB092C60088CF0E94763C8638F5
+:107BD00008F4BDCF0E94763C0E94F33C7ECF0E9409
+:107BE000763C803809F49CC0813809F40BC1823896
+:107BF00009F430C1883909F48FC080E00E94C73C85
+:107C00006CCF84E10E94BD3C0E94F33C66CF85E0CE
+:107C10000E94BD3C0E94F33C60CF0E94763C809362
+:107C200006010E94763C809307010E94F33C55CFE9
+:107C30000E94763C803309F411C183E00E94BD3C70
+:107C400080E00E94C73C49CF0E94763C80930902A5
+:107C50000E94763C8093080280910C028E7F809374
+:107C60000C020E94763C853409F409C18091080217
+:107C700090910902892B89F000E010E00E94763C87
+:107C8000F801E85FFE4F80830F5F1F4F809108026D
+:107C9000909109020817190788F30E94763C8032F8
+:107CA00009F045CF80910C0280FFF5C0609106017C
+:107CB00070910701660F771F7093070160930601AB
+:107CC000A0910802B09109021097C9F0E8E0F1E034
+:107CD0009B01AD014E0F5F1FF999FECF32BD21BD53
+:107CE000819180BDFA9AF99A2F5F3F4FE417F5070B
+:107CF00099F76A0F7B1F70930701609306018091CB
+:107D0000C00085FFFCCFF092C6008091C00085FFC7
+:107D1000FCCFB092C600E1CE83E00E94C73CDDCE2E
+:107D200082E00E94C73CD9CE0E94763C8093090233
+:107D30000E94763C80930802809106019091070191
+:107D4000880F991F90930701809306010E94763C4B
+:107D5000853409F49AC080910C028E7F80930C02C6
+:107D60000E94763C803209F0B8CE8091C00085FF39
+:107D7000FCCFF092C600A0910802B09109021097C2
+:107D8000C1F180910C02082F0170182F1695117007
+:107D9000E0910601F0910701AF014F5F5F4FBA011B
+:107DA00020E030E00023B1F4112339F49491809164
+:107DB000C00085FFFCCF9093C6002F5F3F4FCB01E3
+:107DC0000196FA012A173B0780F4BC014F5F5F4F11
+:107DD000002351F3F999FECFF2BDE1BDF89A90B5B9
+:107DE0008091C00085FFFCCFE6CF709307016093C0
+:107DF00006018091C00085FDE5CE8091C00085FF21
+:107E0000F8CFE0CE81E00E94C73C67CE0E94763C6E
+:107E1000803209F08CCE8091C00085FFFCCFF092BB
+:107E2000C6008091C00085FFFCCFE092C600809123
+:107E3000C00085FFFCCFD092C6008091C00085FFB6
+:107E4000FCCFC092C6008091C00085FFFCCFB092ED
+:107E5000C60043CE80E10E94C73C3FCE0E94763CE4
+:107E60000E94763C182F0E94763C112309F483C0AF
+:107E7000113009F484C08FE00E94C73C2ECE80915F
+:107E80000C02816080930C02F1CE80910C02816023
+:107E900080930C0265CF809107018823880F880B9F
+:107EA0008A2180930B028091060190910701880F2F
+:107EB000991F90930701809306018091080280FF2B
+:107EC00009C08091080290910902019690930902DD
+:107ED00080930802F894F999FECF1127E0910601EA
+:107EE000F0910701C8E0D1E0809108029091090269
+:107EF000103091F40091570001700130D9F303E084
+:107F000000935700E8950091570001700130D9F3B4
+:107F100001E100935700E8950990199000915700EE
+:107F200001700130D9F301E000935700E8951395F3
+:107F3000103498F011270091570001700130D9F3E7
+:107F400005E000935700E89500915700017001305B
+:107F5000D9F301E100935700E8953296029709F0B2
+:107F6000C7CF103011F00296E5CF11248091C000E8
+:107F700085FFC5CEC8CE8EE10E94C73CAECD85E957
+:0A7F80000E94C73CAACDF894FFCF81
+:027F8A00800075
+:040000030000780081
+:00000001FF
diff --git a/test/ardmake/hardware/bootloaders/atmega/ATmegaBOOT_168_diecimila.hex b/test/ardmake/hardware/bootloaders/atmega/ATmegaBOOT_168_diecimila.hex new file mode 100644 index 0000000..feac9d2 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/atmega/ATmegaBOOT_168_diecimila.hex @@ -0,0 +1,126 @@ +:103800000C94341C0C94511C0C94511C0C94511CA1
+:103810000C94511C0C94511C0C94511C0C94511C74
+:103820000C94511C0C94511C0C94511C0C94511C64
+:103830000C94511C0C94511C0C94511C0C94511C54
+:103840000C94511C0C94511C0C94511C0C94511C44
+:103850000C94511C0C94511C0C94511C0C94511C34
+:103860000C94511C0C94511C11241FBECFEFD4E0BA
+:10387000DEBFCDBF11E0A0E0B1E0E4EAFFE302C0AB
+:1038800005900D92A230B107D9F712E0A2E0B1E0A5
+:1038900001C01D92AD30B107E1F70E94361D0C94B6
+:1038A000D01F0C94001C982F9595959595959595FE
+:1038B000905D8F708A307CF0282F295A8091C0004B
+:1038C00085FFFCCF9093C6008091C00085FFFCCFA0
+:1038D0002093C6000895282F205DF0CF982F809167
+:1038E000C00085FFFCCF9093C6000895EF92FF9231
+:1038F0000F931F93EE24FF2487018091C00087FD62
+:1039000017C00894E11CF11C011D111D81E4E8168B
+:1039100082E4F8068FE0080780E0180770F3E09172
+:103920000401F091050109958091C00087FFE9CF5E
+:103930008091C6001F910F91FF90EF9008950E9413
+:10394000761C982F8091C00085FFFCCF9093C60015
+:1039500091362CF490330CF09053892F089597559D
+:10396000892F08951F930E949F1C182F0E949F1C4F
+:103970001295107F810F1F910895882351F0982F81
+:1039800091508091C00087FFFCCF8091C6009923A1
+:10399000B9F708951F93182F0E94761C803249F0C2
+:1039A000809103018F5F809303018530C1F01F91E7
+:1039B00008958091C00085FFFCCF84E18093C6000C
+:1039C0008091C00085FFFCCF1093C6008091C0009D
+:1039D00085FFFCCF80E18093C6001F910895E091A0
+:1039E0000401F091050109951F9108950E94761C2C
+:1039F000803241F0809103018F5F80930301853015
+:103A000081F008958091C00085FFFCCF84E1809310
+:103A1000C6008091C00085FFFCCF80E18093C60086
+:103A20000895E0910401F09105010995089510921F
+:103A30000A028823D1F090E040E951E02D9A28EE67
+:103A400033E0FA013197F1F721503040D1F72D984A
+:103A500028EE33E0FA013197F1F721503040D1F7E9
+:103A60009F5F981758F380930A0208953F924F92F0
+:103A70005F926F927F928F929F92AF92BF92CF92FE
+:103A8000DF92EF92FF920F931F93CF93DF9300008B
+:103A900083E38093C4001092C50088E18093C10045
+:103AA00086E08093C2005098589A259A81E00E943F
+:103AB000171D44E1F42E3EE1E32E24E9D22E96E0D8
+:103AC000C92E80E1B82EAA24A39401E4902E16E515
+:103AD000812EB2E57B2EA0E26A2EF9E45F2EE3E5AB
+:103AE0004E2E70E5372E0E94761C8033B1F1813363
+:103AF00009F441C0803409F479C0813409F48CC0E0
+:103B0000823471F1853409F47BC0803531F182351E
+:103B100021F1813511F1853509F48DC0863509F41F
+:103B20009DC0843609F4AEC0843709F41BC18537C3
+:103B300009F485C1863709F47AC0809103018F5F4B
+:103B400080930301853079F6E0910401F09105013D
+:103B500009950E94761C803351F60E94F61CC3CF53
+:103B600093E18091C00087FFFCCF8091C60099232C
+:103B7000A1F39150F6CF0E94761C8032F1F680912D
+:103B8000C00085FFFCCFF092C6008091C00085FF89
+:103B9000FCCF9092C6008091C00085FFFCCF809240
+:103BA000C6008091C00085FFFCCF7092C600809156
+:103BB000C00085FFFCCF6092C6008091C00085FFE9
+:103BC000FCCF5092C6008091C00085FFFCCF409290
+:103BD000C6008091C00085FFFCCF3092C600809166
+:103BE000C00085FFFCCFB092C6007DCF0E94761C3E
+:103BF000863808F4B2CF0E94761C0E94F61C73CF60
+:103C000094E08091C00087FFFCCF8091C60099238B
+:103C100009F4A3CF9150F5CF0E94761C8038D1F0E3
+:103C2000813861F1823809F499C0883979F080E0EF
+:103C30000E94CA1C58CF0E94761C809306010E94E5
+:103C4000761C809307010E94F61C4DCF83E00E94F2
+:103C5000CA1C49CF82E00E94CA1C45CF0E94761C34
+:103C6000803309F486C192E08091C00087FFFCCFC9
+:103C70008091C6009923D9F29150F6CF81E00E943D
+:103C8000CA1C31CF0E94761C809309020E94761CC8
+:103C90008093080280910C028E7F80930C020E9418
+:103CA000761C853429F480910C02816080930C028B
+:103CB0008091080290910902892B89F000E010E0C0
+:103CC0000E94761CF801E85FFE4F80830F5F1F4F54
+:103CD00080910802909109020817190788F30E9441
+:103CE000761C803209F029CF80910C0280FFD1C070
+:103CF0004091060150910701440F551F5093070151
+:103D000040930601A0910802B09109021097C9F0F2
+:103D1000E8E0F1E09A01BD016E0F7F1FF999FECF37
+:103D200032BD21BD819180BDFA9AF99A2F5F3F4F34
+:103D3000E617F70799F74A0F5B1F50930701409367
+:103D400006018091C00085FFFCCFF092C6008091F3
+:103D5000C00085FFFCCFB092C600C5CE80E10E94B6
+:103D6000CA1CC1CE0E94761C809309020E94761C58
+:103D7000809308028091060190910701880F991F96
+:103D800090930701809306010E94761C853409F404
+:103D90007AC080910C028E7F80930C020E94761C68
+:103DA000803209F0A0CE8091C00085FFFCCFF09258
+:103DB000C600A0910802B09109021097B9F1809154
+:103DC0000C02182F1170082F0270E0910601F0917B
+:103DD00007019F012F5F3F4FB90140E050E01123E1
+:103DE000B1F4002339F494918091C00085FFFCCF99
+:103DF0009093C6004F5F5F4FCB010196F9014A17C0
+:103E00005B0780F4BC012F5F3F4F112351F3F999F9
+:103E1000FECFF2BDE1BDF89A90B58091C00085FF5C
+:103E2000FCCFE6CF70930701609306018091C0003C
+:103E300085FDD9CE8091C00085FFF8CFD4CE0E94F9
+:103E4000761C803209F079CE8091C00085FFFCCFCE
+:103E5000F092C6008091C00085FFFCCFE092C600C2
+:103E60008091C00085FFFCCFD092C6008091C00039
+:103E700085FFFCCFC092C6008091C00085FFFCCFBB
+:103E8000B092C60030CE80910C02816080930C020B
+:103E900085CF809107018823880F880B8A21809322
+:103EA0000B028091060190910701880F991F909352
+:103EB0000701809306018091080280FF09C080916C
+:103EC00008029091090201969093090280930802DA
+:103ED000F894F999FECF1127E0910601F0910701BE
+:103EE000C8E0D1E08091080290910902103091F46D
+:103EF0000091570001700130D9F303E0009357009F
+:103F0000E8950091570001700130D9F301E1009369
+:103F10005700E89509901990009157000170013001
+:103F2000D9F301E000935700E8951395103498F009
+:103F300011270091570001700130D9F305E000937B
+:103F40005700E8950091570001700130D9F301E165
+:103F500000935700E8953296029709F0C7CF1030CA
+:103F600011F00296E5CF11248091C00085FFE9CEC3
+:103F7000ECCE0E94761C0E94761C182F0E94761CA4
+:103F8000112351F0113021F086E00E94CA1CABCD04
+:103F900084E90E94CA1CA7CD8EE10E94CA1CA3CD51
+:043FA000F894FFCFC3
+:023FA40080009B
+:0400000300003800C1
+:00000001FF
diff --git a/test/ardmake/hardware/bootloaders/atmega/ATmegaBOOT_168_ng.hex b/test/ardmake/hardware/bootloaders/atmega/ATmegaBOOT_168_ng.hex new file mode 100644 index 0000000..387091e --- /dev/null +++ b/test/ardmake/hardware/bootloaders/atmega/ATmegaBOOT_168_ng.hex @@ -0,0 +1,110 @@ +:103800000C94341C0C94511C0C94511C0C94511CA1
+:103810000C94511C0C94511C0C94511C0C94511C74
+:103820000C94511C0C94511C0C94511C0C94511C64
+:103830000C94511C0C94511C0C94511C0C94511C54
+:103840000C94511C0C94511C0C94511C0C94511C44
+:103850000C94511C0C94511C0C94511C0C94511C34
+:103860000C94511C0C94511C11241FBECFEFD4E0BA
+:10387000DEBFCDBF11E0A0E0B1E0E4EAFEE302C0AC
+:1038800005900D92A230B107D9F712E0A2E0B1E0A5
+:1038900001C01D92AD30B107E1F70E94ED1C0C9400
+:1038A000511F0C94001C482F10920A0280E08417CC
+:1038B000E0F4582F2D9A28EE33E080E991E001974B
+:1038C000F1F721503040C9F72D9828EE33E080E918
+:1038D00091E00197F1F721503040C9F7852F8F5FB4
+:1038E000582F841738F380930A020895EF92FF92BD
+:1038F0000F931F93EE24FF2487018091C00087FD62
+:1039000017C00894E11CF11C011D111D81E0E8168F
+:1039100082E1F8068AE7080780E0180770F3E09173
+:103920000201F091030109958091C00087FFE9CF62
+:103930008091C600992787FD90951F910F91FF9068
+:10394000EF900895982F8091C00085FFFCCF909351
+:10395000C60008950E94761C803271F080910401A7
+:103960008F5F80930401853009F00895E091020192
+:10397000F09103010995089584E10E94A21C80E161
+:103980000E94A21C0895CF93C82F0E94761C8032FB
+:1039900041F0809104018F5F80930401853081F4B0
+:1039A0000AC084E10E94A21C8C2F0E94A21C80E10C
+:1039B0000E94A21C05C0E0910201F091030109954B
+:1039C000CF910895CF93C82FC150CF3F21F00E94CF
+:1039D000761CC150E0F7CF910895CFEFD4E0DEBF61
+:1039E000CDBF000083E38093C4001092C50088E13E
+:1039F0008093C10086E08093C2005098589A259A1F
+:103A000083E00E94531C0E94761C8033B1F1813305
+:103A1000B9F1803409F455C0813409F45BC08234B3
+:103A200009F46DC0853409F470C0803531F18235F8
+:103A300021F1813511F1853509F46BC0863509F422
+:103A400073C0843609F47AC0843709F4CEC0853750
+:103A500009F429C1863709F44AC0809104018F5FB7
+:103A600080930401853079F6E0910201F091030121
+:103A700009950E94761C803351F60E94AA1CC3CF80
+:103A80000E94761CC82F803241F784E10E94A21C5C
+:103A900081E40E94A21C86E50E94A21C82E50E948D
+:103AA000A21C8C2F0E94A21C89E40E94A21C83E508
+:103AB0000E94A21C80E50E94A21C80E10E94A21C20
+:103AC000A2CF0E94761C8638C0F20E94761C0E940B
+:103AD000AA1C99CF0E94761C803809F486C18138CF
+:103AE00009F487C1823809F488C1883921F080E05F
+:103AF0000E94C31C88CF83E00E94C31C84CF84E152
+:103B00000E94E21C0E94AA1C7ECF85E00E94E21C5B
+:103B1000F9CF0E94761C809306010E94761C809348
+:103B200007010E94AA1C6FCF0E94761C803309F403
+:103B3000CAC083E00E94E21C80E0DACF0E94761CBB
+:103B4000809309020E94761C8093080280910C02E7
+:103B50008E7F80930C020E94761C853409F4C4C0C9
+:103B600000E010E0809108029091090218161906F1
+:103B700070F4C8E0D1E00E94761C89930F5F1F4F5C
+:103B8000809108029091090208171907A0F30E947A
+:103B9000761C803209F061CF80910C0280FFAEC0AC
+:103BA000E0910601F0910701EE0FFF1F00E010E029
+:103BB00020910802309109021216130680F4A8E041
+:103BC000B1E0F999FECFF2BDE1BD8D9180BDFA9AC9
+:103BD000F99A31960F5F1F4F0217130790F3F09376
+:103BE0000701E093060184E166CF0E94761C809372
+:103BF00009020E94761C8093080280910601909130
+:103C00000701880F991F90930701809306010E9476
+:103C1000761C853409F46EC080910C028E7F8093EF
+:103C20000C020E94761C803209F0EDCE84E10E94E5
+:103C3000A21C00E010E02091080230910902121647
+:103C4000130608F03ACFE0910601F0910701809148
+:103C50000C0280FF1FC0F999FECFF2BDE1BDF89ABA
+:103C600080B50E94A21CE0910601F09107013196F7
+:103C7000F0930701E09306012091080230910902B8
+:103C80000F5F1F4F0217130708F017CF80910C0228
+:103C900080FDE1CF869580FFB4C03196F093070197
+:103CA000E0930601EDCF0E94761C803209F0D5CE5C
+:103CB00084E10E94A21C8EE10E94A21C84E90E9461
+:103CC000A21C86E0F8CE0E94761C0E94761CC82FAB
+:103CD0000E94761CCC2309F47CC0C13009F47DC05D
+:103CE00086E00E94C31C8FCE80910C02816080937D
+:103CF0000C0236CF80910C02816091CF8091070138
+:103D000087FD6FC010920B02809106019091070110
+:103D1000880F991F909307018093060180910802F4
+:103D200080FF09C08091080290910902019690934A
+:103D3000090280930802F894F999FECF1127E091C7
+:103D40000601F0910701C8E0D1E08091080290914E
+:103D50000902103091F40091570001700130D9F33D
+:103D600003E000935700E89500915700017001307F
+:103D7000D9F301E100935700E8950990199000915B
+:103D8000570001700130D9F301E000935700E89526
+:103D90001395103498F011270091570001700130ED
+:103DA000D9F305E000935700E895009157000170A2
+:103DB0000130D9F301E100935700E895329602975C
+:103DC00009F0C7CF103011F00296E5CF112484E13D
+:103DD00072CE8EE10E94C31C16CE84E90E94C31CE1
+:103DE00012CE81E080930B028FCF82E00E94C31C31
+:103DF0000ACE81E00E94C31C06CE80E10E94C31C53
+:103E000002CE84910E94A21C2091080230910902E6
+:103E1000E0910601F091070140CFCF930E94761CFC
+:103E2000C82F0E94A21CC13614F0C75503C0C0336E
+:103E30000CF0C0538C2F992787FD9095CF91089552
+:103E40000F931F930E940D1F082F112707FD109538
+:103E500002951295107F1027007F10270E940D1FDA
+:103E6000800F992787FD90951F910F910895CF930B
+:103E7000C82F85958595859585958A3034F0895A22
+:103E8000CF70CA3034F0C95A05C0805DCF70CA30D7
+:103E9000D4F7C05D0E94A21C8C2F0E94A21CCF915F
+:043EA0000895FFCFB3
+:023EA40080009C
+:0400000300003800C1
+:00000001FF
diff --git a/test/ardmake/hardware/bootloaders/atmega/ATmegaBOOT_168_pro_8MHz.hex b/test/ardmake/hardware/bootloaders/atmega/ATmegaBOOT_168_pro_8MHz.hex new file mode 100644 index 0000000..994e478 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/atmega/ATmegaBOOT_168_pro_8MHz.hex @@ -0,0 +1,126 @@ +:103800000C94341C0C94511C0C94511C0C94511CA1
+:103810000C94511C0C94511C0C94511C0C94511C74
+:103820000C94511C0C94511C0C94511C0C94511C64
+:103830000C94511C0C94511C0C94511C0C94511C54
+:103840000C94511C0C94511C0C94511C0C94511C44
+:103850000C94511C0C94511C0C94511C0C94511C34
+:103860000C94511C0C94511C11241FBECFEFD4E0BA
+:10387000DEBFCDBF11E0A0E0B1E0EEEAFFE302C0A1
+:1038800005900D92A230B107D9F712E0A2E0B1E0A5
+:1038900001C01D92AD30B107E1F70E94331D0C94B9
+:1038A000D51F0C94001C982F9595959595959595F9
+:1038B000905D8F708A307CF0282F295A8091C0004B
+:1038C00085FFFCCF9093C6008091C00085FFFCCFA0
+:1038D0002093C6000895282F205DF0CF982F809167
+:1038E000C00085FFFCCF9093C6000895EF92FF9231
+:1038F0000F931F93EE24FF2487018091C00087FD62
+:1039000017C00894E11CF11C011D111D81E2E8168D
+:1039100081EAF80687E0080780E0180770F3E09175
+:103920000401F091050109958091C00087FFE9CF5E
+:103930008091C6001F910F91FF90EF9008950E9413
+:10394000761C982F8091C00085FFFCCF9093C60015
+:1039500091362CF490330CF09053892F089597559D
+:10396000892F08951F930E949F1C182F0E949F1C4F
+:103970001295107F810F1F9108951F93182F882390
+:1039800021F00E94761C1150E1F71F9108951F93BA
+:10399000182F0E94761C803249F0809103018F5FBE
+:1039A000809303018530C1F01F9108958091C0007C
+:1039B00085FFFCCF84E18093C6008091C00085FF25
+:1039C000FCCF1093C6008091C00085FFFCCF80E142
+:1039D0008093C6001F910895E0910401F0910501C4
+:1039E00009951F9108950E94761C803241F08091C4
+:1039F00003018F5F80930301853081F008958091EA
+:103A0000C00085FFFCCF84E18093C6008091C00098
+:103A100085FFFCCF80E18093C6000895E09104010A
+:103A2000F09105010995089510920A028823D1F0BA
+:103A300090E048EC50E02D9A28EE33E0FA013197FF
+:103A4000F1F721503040D1F72D9828EE33E0FA01FC
+:103A50003197F1F721503040D1F79F5F981758F315
+:103A600080930A0208953F924F925F926F927F92E5
+:103A70008F929F92AF92BF92CF92DF92EF92FF927E
+:103A80000F931F93CF93DF9394B714BE8091600080
+:103A90008861809360001092600091FF0CC289E100
+:103AA0008093C4001092C50088E18093C10086E035
+:103AB0008093C2005098589A259A81E00E94141D64
+:103AC00044E1F42E3EE1E32E24E9D22E96E0C92E05
+:103AD00080E1B82EAA24A39401E4902E16E5812E4D
+:103AE000B2E57B2EA0E26A2EF9E45F2EE3E54E2ECE
+:103AF00070E5372E0E94761C8033B9F18133C1F115
+:103B0000803409F470C0813409F477C0823409F438
+:103B100086C0853409F489C0803539F1823529F1B0
+:103B2000813509F4AFC1853509F485C0863509F4BE
+:103B30008DC0843609F435C1843709F4C1C0853796
+:103B400009F490C0863709F466C0809103018F5F45
+:103B500080930301853071F6E0910401F091050135
+:103B600009950E94761C803349F60E94F31CC2CF4F
+:103B70000E94761C803249F78091C00085FFFCCFFF
+:103B8000F092C6008091C00085FFFCCF9092C600E5
+:103B90008091C00085FFFCCF8092C6008091C0005C
+:103BA00085FFFCCF7092C6008091C00085FFFCCFDE
+:103BB0006092C6008091C00085FFFCCF5092C60085
+:103BC0008091C00085FFFCCF4092C6008091C0006C
+:103BD00085FFFCCF3092C6008091C00085FFFCCFEE
+:103BE000B092C60087CF0E94761C863808F4BDCFFD
+:103BF0000E94761C0E94F31C7DCF0E94761C8038A8
+:103C000009F45AC0813809F453C0823809F440C11C
+:103C1000883909F449C080E00E94C71C6BCF84E159
+:103C20000E94BD1C0E94F31C65CF85E00E94BD1C54
+:103C30000E94F31C5FCF0E94761C809306010E94B5
+:103C4000761C809307010E94F31C54CF0E94761CBF
+:103C5000803309F421C183E00E94BD1C80E00E94F2
+:103C6000C71C48CF0E94761C803209F06ECF80912D
+:103C7000C00085FFFCCFF092C6008091C00085FF98
+:103C8000FCCFE092C6008091C00085FFFCCFD092AF
+:103C9000C6008091C00085FFFCCFC092C600809115
+:103CA000C00085FFFCCF9CCF83E00E94C71C22CFC1
+:103CB00081E00E94C71C1ECF82E00E94C71C1ACF61
+:103CC0000E94761C809309020E94761C8093080251
+:103CD0008091060190910701880F991F9093070129
+:103CE000809306010E94761C853409F4C5C080913A
+:103CF0000C028E7F80930C020E94761C803209F0A9
+:103D0000F9CE8091C00085FFFCCFF092C600609193
+:103D10000802709109026115710591F140E050E0CF
+:103D200080910C02A82FA170B82FB27010C0BB23D5
+:103D300061F1E0910601F09107013196F0930701DE
+:103D4000E09306014F5F5F4F46175707C8F4AA2359
+:103D500071F3F999FECF209106013091070132BD30
+:103D600021BDF89A90B58091C00085FFFCCF90935B
+:103D7000C6002F5F3F4F3093070120930601E2CF2B
+:103D80008091C00085FFFCCF2BCFE0910601F09120
+:103D9000070194918091C00085FFFCCF9093C600ED
+:103DA000CCCF0E94761C809309020E94761C8093DF
+:103DB000080280910C028E7F80930C020E94761C78
+:103DC000853429F480910C02816080930C028091EB
+:103DD000080290910902892B89F000E010E00E940E
+:103DE000761CF801E85FFE4F80830F5F1F4F8091C4
+:103DF0000802909109020817190788F30E94761C9F
+:103E0000803209F0A2CE80910C0280FF62C0409106
+:103E1000060150910701440F551F5093070140932D
+:103E20000601609108027091090261157105C9F0DF
+:103E3000E8E0F1E09A01DB01AE0FBF1FF999FECF78
+:103E400032BD21BD819180BDFA9AF99A2F5F3F4F13
+:103E5000EA17FB0799F7460F571F50930701409346
+:103E600006018091C00085FFFCCFF092C6008091D2
+:103E7000C00085FFFCCFB4CE80910C02816080939E
+:103E80000C023ACF0E94F31C88E080936000FFCFC1
+:103E900080E10E94C71C2ECE0E94761C0E94761CD8
+:103EA000182F0E94761C112381F0113051F086E00A
+:103EB0000E94C71C1FCEE0910401F09105010995F5
+:103EC000EECD84E90E94C71C15CE8EE10E94C71C6E
+:103ED00011CE809107018823880F880B8A21809357
+:103EE0000B028091060190910701880F991F909312
+:103EF0000701809306018091080280FF09C080912C
+:103F00000802909109020196909309028093080299
+:103F1000F894F999FECF1127E0910601F09107017D
+:103F2000C8E0D1E08091080290910902103091F42C
+:103F30000091570001700130D9F303E0009357005E
+:103F4000E8950091570001700130D9F301E1009329
+:103F50005700E895099019900091570001700130C1
+:103F6000D9F301E000935700E8951395103498F0C9
+:103F700011270091570001700130D9F305E000933B
+:103F80005700E8950091570001700130D9F301E125
+:103F900000935700E8953296029709F0C7CF10308A
+:0E3FA00011F00296E5CF11245CCFF894FFCF0C
+:023FAE00800091
+:0400000300003800C1
+:00000001FF
diff --git a/test/ardmake/hardware/bootloaders/atmega/Makefile b/test/ardmake/hardware/bootloaders/atmega/Makefile new file mode 100644 index 0000000..0fd54db --- /dev/null +++ b/test/ardmake/hardware/bootloaders/atmega/Makefile @@ -0,0 +1,224 @@ +# Makefile for ATmegaBOOT +# E.Lins, 18.7.2005 +# $Id$ +# +# Instructions +# +# To make bootloader .hex file: +# make diecimila +# make lilypad +# make ng +# etc... +# +# To burn bootloader .hex file: +# make diecimila_isp +# make lilypad_isp +# make ng_isp +# etc... + +# program name should not be changed... +PROGRAM = ATmegaBOOT_168 + +# enter the parameters for the avrdude isp tool +ISPTOOL = stk500v2 +ISPPORT = usb +ISPSPEED = -b 115200 + +MCU_TARGET = atmega168 +LDSECTION = --section-start=.text=0x3800 + +# the efuse should really be 0xf8; since, however, only the lower +# three bits of that byte are used on the atmega168, avrdude gets +# confused if you specify 1's for the higher bits, see: +# http://tinker.it/now/2007/02/24/the-tale-of-avrdude-atmega168-and-extended-bits-fuses/ +# +# similarly, the lock bits should be 0xff instead of 0x3f (to +# unlock the bootloader section) and 0xcf instead of 0x0f (to +# lock it), but since the high two bits of the lock byte are +# unused, avrdude would get confused. + +ISPFUSES = avrdude -c $(ISPTOOL) -p $(MCU_TARGET) -P $(ISPPORT) $(ISPSPEED) \ +-e -u -U lock:w:0x3f:m -U efuse:w:0x$(EFUSE):m -U hfuse:w:0x$(HFUSE):m -U lfuse:w:0x$(LFUSE):m +ISPFLASH = avrdude -c $(ISPTOOL) -p $(MCU_TARGET) -P $(ISPPORT) $(ISPSPEED) \ +-U flash:w:$(PROGRAM)_$(TARGET).hex -U lock:w:0x0f:m + +STK500 = "C:\Program Files\Atmel\AVR Tools\STK500\Stk500.exe" +STK500-1 = $(STK500) -e -d$(MCU_TARGET) -pf -vf -if$(PROGRAM)_$(TARGET).hex \ +-lFF -LFF -f$(HFUSE)$(LFUSE) -EF8 -ms -q -cUSB -I200kHz -s -wt +STK500-2 = $(STK500) -d$(MCU_TARGET) -ms -q -lCF -LCF -cUSB -I200kHz -s -wt + + +OBJ = $(PROGRAM).o +OPTIMIZE = -O2 + +DEFS = +LIBS = + +CC = avr-gcc + +# Override is only needed by avr-lib build system. + +override CFLAGS = -g -Wall $(OPTIMIZE) -mmcu=$(MCU_TARGET) -DF_CPU=$(AVR_FREQ) $(DEFS) +override LDFLAGS = -Wl,$(LDSECTION) +#override LDFLAGS = -Wl,-Map,$(PROGRAM).map,$(LDSECTION) + +OBJCOPY = avr-objcopy +OBJDUMP = avr-objdump + +all: + +lilypad: TARGET = lilypad +lilypad: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>1' '-DNUM_LED_FLASHES=3' +lilypad: AVR_FREQ = 8000000L +lilypad: $(PROGRAM)_lilypad.hex + +lilypad_isp: lilypad +lilypad_isp: TARGET = lilypad +lilypad_isp: HFUSE = DD +lilypad_isp: LFUSE = E2 +lilypad_isp: EFUSE = 00 +lilypad_isp: isp + +lilypad_resonator: TARGET = lilypad_resonator +lilypad_resonator: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=3' +lilypad_resonator: AVR_FREQ = 8000000L +lilypad_resonator: $(PROGRAM)_lilypad_resonator.hex + +lilypad_resonator_isp: lilypad_resonator +lilypad_resonator_isp: TARGET = lilypad_resonator +lilypad_resonator_isp: HFUSE = DD +lilypad_resonator_isp: LFUSE = C6 +lilypad_resonator_isp: EFUSE = 00 +lilypad_resonator_isp: isp + +pro8: TARGET = pro_8MHz +pro8: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' '-DWATCHDOG_MODS' +pro8: AVR_FREQ = 8000000L +pro8: $(PROGRAM)_pro_8MHz.hex + +pro8_isp: pro8 +pro8_isp: TARGET = pro_8MHz +pro8_isp: HFUSE = DD +pro8_isp: LFUSE = C6 +pro8_isp: EFUSE = 00 +pro8_isp: isp + +pro16: TARGET = pro_16MHz +pro16: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' '-DWATCHDOG_MODS' +pro16: AVR_FREQ = 16000000L +pro16: $(PROGRAM)_pro_16MHz.hex + +pro16_isp: pro16 +pro16_isp: TARGET = pro_16MHz +pro16_isp: HFUSE = DD +pro16_isp: LFUSE = C6 +pro16_isp: EFUSE = 00 +pro16_isp: isp + +pro20: TARGET = pro_20mhz +pro20: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' '-DWATCHDOG_MODS' +pro20: AVR_FREQ = 20000000L +pro20: $(PROGRAM)_pro_20mhz.hex + +pro20_isp: pro20 +pro20_isp: TARGET = pro_20mhz +pro20_isp: HFUSE = DD +pro20_isp: LFUSE = C6 +pro20_isp: EFUSE = 00 +pro20_isp: isp + +diecimila: TARGET = diecimila +diecimila: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' +diecimila: AVR_FREQ = 16000000L +diecimila: $(PROGRAM)_diecimila.hex + +diecimila_isp: diecimila +diecimila_isp: TARGET = diecimila +diecimila_isp: HFUSE = DD +diecimila_isp: LFUSE = FF +diecimila_isp: EFUSE = 00 +diecimila_isp: isp + +ng: TARGET = ng +ng: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>1' '-DNUM_LED_FLASHES=3' +ng: AVR_FREQ = 16000000L +ng: $(PROGRAM)_ng.hex + +ng_isp: ng +ng_isp: TARGET = ng +ng_isp: HFUSE = DD +ng_isp: LFUSE = FF +ng_isp: EFUSE = 00 +ng_isp: isp + +atmega328: TARGET = atmega328 +atmega328: MCU_TARGET = atmega328p +atmega328: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' -DBAUD_RATE=57600 +atmega328: AVR_FREQ = 16000000L +atmega328: LDSECTION = --section-start=.text=0x7800 +atmega328: $(PROGRAM)_atmega328.hex + +atmega328_isp: atmega328 +atmega328_isp: TARGET = atmega328 +atmega328_isp: MCU_TARGET = atmega328p +atmega328_isp: HFUSE = DA +atmega328_isp: LFUSE = FF +atmega328_isp: EFUSE = 05 +atmega328_isp: isp + +atmega328_pro8: TARGET = atmega328_pro_8MHz +atmega328_pro8: MCU_TARGET = atmega328p +atmega328_pro8: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' -DBAUD_RATE=57600 -DDOUBLE_SPEED +atmega328_pro8: AVR_FREQ = 8000000L +atmega328_pro8: LDSECTION = --section-start=.text=0x7800 +atmega328_pro8: $(PROGRAM)_atmega328_pro_8MHz.hex + +atmega328_pro8_isp: atmega328_pro8 +atmega328_pro8_isp: TARGET = atmega328_pro_8MHz +atmega328_pro8_isp: MCU_TARGET = atmega328p +atmega328_pro8_isp: HFUSE = DA +atmega328_pro8_isp: LFUSE = FF +atmega328_pro8_isp: EFUSE = 05 +atmega328_pro8_isp: isp + +mega: TARGET = atmega1280 +mega: MCU_TARGET = atmega1280 +mega: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=0' -DBAUD_RATE=57600 +mega: AVR_FREQ = 16000000L +mega: LDSECTION = --section-start=.text=0x1F000 +mega: $(PROGRAM)_atmega1280.hex + +mega_isp: mega +mega_isp: TARGET = atmega1280 +mega_isp: MCU_TARGET = atmega1280 +mega_isp: HFUSE = DA +mega_isp: LFUSE = FF +mega_isp: EFUSE = F5 +mega_isp: isp + +isp: $(TARGET) + $(ISPFUSES) + $(ISPFLASH) + +isp-stk500: $(PROGRAM)_$(TARGET).hex + $(STK500-1) + $(STK500-2) + +%.elf: $(OBJ) + $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $^ $(LIBS) + +clean: + rm -rf *.o *.elf *.lst *.map *.sym *.lss *.eep *.srec *.bin *.hex + +%.lst: %.elf + $(OBJDUMP) -h -S $< > $@ + +%.hex: %.elf + $(OBJCOPY) -j .text -j .data -O ihex $< $@ + +%.srec: %.elf + $(OBJCOPY) -j .text -j .data -O srec $< $@ + +%.bin: %.elf + $(OBJCOPY) -j .text -j .data -O binary $< $@ + diff --git a/test/ardmake/hardware/bootloaders/atmega8/ATmegaBOOT.c b/test/ardmake/hardware/bootloaders/atmega8/ATmegaBOOT.c new file mode 100644 index 0000000..17977e6 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/atmega8/ATmegaBOOT.c @@ -0,0 +1,507 @@ +/**********************************************************/ +/* Serial Bootloader for Atmel mega8 AVR Controller */ +/* */ +/* ATmegaBOOT.c */ +/* */ +/* Copyright (c) 2003, Jason P. Kyle */ +/* */ +/* Hacked by DojoCorp - ZGZ - MMX - IVR */ +/* Hacked by David A. Mellis */ +/* */ +/* This program is free software; you can redistribute it */ +/* and/or modify it under the terms of the GNU General */ +/* Public License as published by the Free Software */ +/* Foundation; either version 2 of the License, or */ +/* (at your option) any later version. */ +/* */ +/* This program is distributed in the hope that it will */ +/* be useful, but WITHOUT ANY WARRANTY; without even the */ +/* implied warranty of MERCHANTABILITY or FITNESS FOR A */ +/* PARTICULAR PURPOSE. See the GNU General Public */ +/* License for more details. */ +/* */ +/* You should have received a copy of the GNU General */ +/* Public License along with this program; if not, write */ +/* to the Free Software Foundation, Inc., */ +/* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +/* */ +/* Licence can be viewed at */ +/* http://www.fsf.org/licenses/gpl.txt */ +/* */ +/* Target = Atmel AVR m8 */ +/**********************************************************/ + +#include <inttypes.h> +#include <avr/io.h> +#include <avr/pgmspace.h> +#include <avr/eeprom.h> +#include <avr/interrupt.h> +#include <avr/delay.h> + +//#define F_CPU 16000000 + +/* We, Malmoitians, like slow interaction + * therefore the slow baud rate ;-) + */ +//#define BAUD_RATE 9600 + +/* 6.000.000 is more or less 8 seconds at the + * speed configured here + */ +//#define MAX_TIME_COUNT 6000000 +#define MAX_TIME_COUNT (F_CPU>>1) +///#define MAX_TIME_COUNT_MORATORY 1600000 + +/* SW_MAJOR and MINOR needs to be updated from time to time to avoid warning message from AVR Studio */ +#define HW_VER 0x02 +#define SW_MAJOR 0x01 +#define SW_MINOR 0x12 + +// AVR-GCC compiler compatibility +// avr-gcc compiler v3.1.x and older doesn't support outb() and inb() +// if necessary, convert outb and inb to outp and inp +#ifndef outb + #define outb(sfr,val) (_SFR_BYTE(sfr) = (val)) +#endif +#ifndef inb + #define inb(sfr) _SFR_BYTE(sfr) +#endif + +/* defines for future compatibility */ +#ifndef cbi + #define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit)) +#endif +#ifndef sbi + #define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit)) +#endif + +/* Adjust to suit whatever pin your hardware uses to enter the bootloader */ +#define eeprom_rb(addr) eeprom_read_byte ((uint8_t *)(addr)) +#define eeprom_rw(addr) eeprom_read_word ((uint16_t *)(addr)) +#define eeprom_wb(addr, val) eeprom_write_byte ((uint8_t *)(addr), (uint8_t)(val)) + +/* Onboard LED is connected to pin PB5 */ +#define LED_DDR DDRB +#define LED_PORT PORTB +#define LED_PIN PINB +#define LED PINB5 + + +#define SIG1 0x1E // Yep, Atmel is the only manufacturer of AVR micros. Single source :( +#define SIG2 0x93 +#define SIG3 0x07 +#define PAGE_SIZE 0x20U //32 words + + +void putch(char); +char getch(void); +void getNch(uint8_t); +void byte_response(uint8_t); +void nothing_response(void); + +union address_union { + uint16_t word; + uint8_t byte[2]; +} address; + +union length_union { + uint16_t word; + uint8_t byte[2]; +} length; + +struct flags_struct { + unsigned eeprom : 1; + unsigned rampz : 1; +} flags; + +uint8_t buff[256]; +//uint8_t address_high; + +uint8_t pagesz=0x80; + +uint8_t i; +//uint8_t bootuart0=0,bootuart1=0; + + +void (*app_start)(void) = 0x0000; + +int main(void) +{ + uint8_t ch,ch2; + uint16_t w; + + //cbi(BL_DDR,BL); + //sbi(BL_PORT,BL); + + asm volatile("nop\n\t"); + + /* check if flash is programmed already, if not start bootloader anyway */ + //if(pgm_read_byte_near(0x0000) != 0xFF) { + + /* check if bootloader pin is set low */ + //if(bit_is_set(BL_PIN,BL)) app_start(); + //} + + /* initialize UART(s) depending on CPU defined */ + /* m8 */ + UBRRH = (((F_CPU/BAUD_RATE)/16)-1)>>8; // set baud rate + UBRRL = (((F_CPU/BAUD_RATE)/16)-1); + UCSRB = (1<<RXEN)|(1<<TXEN); // enable Rx & Tx + UCSRC = (1<<URSEL)|(1<<UCSZ1)|(1<<UCSZ0); // config USART; 8N1 + + //UBRRL = (uint8_t)(F_CPU/(BAUD_RATE*16L)-1); + //UBRRH = (F_CPU/(BAUD_RATE*16L)-1) >> 8; + //UCSRA = 0x00; + //UCSRC = 0x86; + //UCSRB = _BV(TXEN)|_BV(RXEN); + + + /* this was giving uisp problems, so I removed it; without it, the boot + works on with uisp and avrdude on the mac (at least). */ + //putch('\0'); + + //uint32_t l; + //uint32_t time_count; + //time_count=0; + + /* set LED pin as output */ + sbi(LED_DDR,LED); + for (i = 0; i < 16; i++) { + outb(LED_PORT, inb(LED_PORT) ^ _BV(LED)); + _delay_loop_2(0); + } + + //for (l=0; l<40000000; l++) + //outb(LED_PORT, inb(LED_PORT) ^= _BV(LED)); + + /* flash onboard LED three times to signal entering of bootloader */ + //for(i=0; i<3; ++i) { + //for(l=0; l<40000000; ++l); + //sbi(LED_PORT,LED); + //for(l=0; l<40000000; ++l); + //cbi(LED_PORT,LED); + //} + + /* see comment at previous call to putch() */ + //putch('\0'); // this line is needed for the synchronization of the programmer + + /* forever */ + for (;;) { + //if((inb(UCSRA) & _BV(RXC))){ + /* get character from UART */ + ch = getch(); + + /* A bunch of if...else if... gives smaller code than switch...case ! */ + + /* Hello is anyone home ? */ + if(ch=='0') { + nothing_response(); + } + + /* Request programmer ID */ + /* Not using PROGMEM string due to boot block in m128 being beyond 64kB boundry */ + /* Would need to selectively manipulate RAMPZ, and it's only 9 characters anyway so who cares. */ + else if(ch=='1') { + if (getch() == ' ') { + putch(0x14); + putch('A'); + putch('V'); + putch('R'); + putch(' '); + putch('I'); + putch('S'); + putch('P'); + putch(0x10); + } + } + + /* AVR ISP/STK500 board commands DON'T CARE so default nothing_response */ + else if(ch=='@') { + ch2 = getch(); + if (ch2>0x85) getch(); + nothing_response(); + } + + /* AVR ISP/STK500 board requests */ + else if(ch=='A') { + ch2 = getch(); + if(ch2==0x80) byte_response(HW_VER); // Hardware version + else if(ch2==0x81) byte_response(SW_MAJOR); // Software major version + else if(ch2==0x82) byte_response(SW_MINOR); // Software minor version + //else if(ch2==0x98) byte_response(0x03); // Unknown but seems to be required by avr studio 3.56 + else byte_response(0x00); // Covers various unnecessary responses we don't care about + } + + /* Device Parameters DON'T CARE, DEVICE IS FIXED */ + else if(ch=='B') { + getNch(20); + nothing_response(); + } + + /* Parallel programming stuff DON'T CARE */ + else if(ch=='E') { + getNch(5); + nothing_response(); + } + + /* Enter programming mode */ + else if(ch=='P') { + nothing_response(); + // FIXME: modified only here by DojoCorp, Mumbai, India, 20050626 + //time_count=0; // exted the delay once entered prog.mode + } + + /* Leave programming mode */ + else if(ch=='Q') { + nothing_response(); + //time_count=MAX_TIME_COUNT_MORATORY; // once the programming is done, + // we should start the application + // but uisp has problems with this, + // therefore we just change the times + // and give the programmer 1 sec to react + } + + /* Erase device, don't care as we will erase one page at a time anyway. */ + else if(ch=='R') { + nothing_response(); + } + + /* Set address, little endian. EEPROM in bytes, FLASH in words */ + /* Perhaps extra address bytes may be added in future to support > 128kB FLASH. */ + /* This might explain why little endian was used here, big endian used everywhere else. */ + else if(ch=='U') { + address.byte[0] = getch(); + address.byte[1] = getch(); + nothing_response(); + } + + /* Universal SPI programming command, disabled. Would be used for fuses and lock bits. */ + else if(ch=='V') { + getNch(4); + byte_response(0x00); + } + + /* Write memory, length is big endian and is in bytes */ + else if(ch=='d') { + length.byte[1] = getch(); + length.byte[0] = getch(); + flags.eeprom = 0; + if (getch() == 'E') flags.eeprom = 1; + for (w=0;w<length.word;w++) { + buff[w] = getch(); // Store data in buffer, can't keep up with serial data stream whilst programming pages + } + if (getch() == ' ') { + if (flags.eeprom) { //Write to EEPROM one byte at a time + for(w=0;w<length.word;w++) { + eeprom_wb(address.word,buff[w]); + address.word++; + } + } else { //Write to FLASH one page at a time + //if (address.byte[1]>127) address_high = 0x01; //Only possible with m128, m256 will need 3rd address byte. FIXME + //else address_high = 0x00; + + //address.word = address.word << 1; //address * 2 -> byte location + //if ((length.byte[0] & 0x01)) length.word++; //Even up an odd number of bytes + cli(); //Disable interrupts, just to be sure + while(bit_is_set(EECR,EEWE)); //Wait for previous EEPROM writes to complete + asm volatile( + "clr r17 \n\t" //page_word_count + "lds r30,address \n\t" //Address of FLASH location (in words) + "lds r31,address+1 \n\t" + "lsl r30 \n\t" //address * 2 -> byte location + "rol r31 \n\t" + "ldi r28,lo8(buff) \n\t" //Start of buffer array in RAM + "ldi r29,hi8(buff) \n\t" + "lds r24,length \n\t" //Length of data to be written (in bytes) + "lds r25,length+1 \n\t" + "sbrs r24,0 \n\t" //Even up an odd number of bytes + "rjmp length_loop \n\t" + "adiw r24,1 \n\t" + "length_loop: \n\t" //Main loop, repeat for number of words in block + "cpi r17,0x00 \n\t" //If page_word_count=0 then erase page + "brne no_page_erase \n\t" + "rcall wait_spm \n\t" +// "wait_spm1: \n\t" +// "lds r16,%0 \n\t" //Wait for previous spm to complete +// "andi r16,1 \n\t" +// "cpi r16,1 \n\t" +// "breq wait_spm1 \n\t" + "ldi r16,0x03 \n\t" //Erase page pointed to by Z + "sts %0,r16 \n\t" + "spm \n\t" + "rcall wait_spm \n\t" +// "wait_spm2: \n\t" +// "lds r16,%0 \n\t" //Wait for previous spm to complete +// "andi r16,1 \n\t" +// "cpi r16,1 \n\t" +// "breq wait_spm2 \n\t" + "ldi r16,0x11 \n\t" //Re-enable RWW section + "sts %0,r16 \n\t" + "spm \n\t" + "no_page_erase: \n\t" + "ld r0,Y+ \n\t" //Write 2 bytes into page buffer + "ld r1,Y+ \n\t" + + "rcall wait_spm \n\t" +// "wait_spm3: \n\t" +// "lds r16,%0 \n\t" //Wait for previous spm to complete +// "andi r16,1 \n\t" +// "cpi r16,1 \n\t" +// "breq wait_spm3 \n\t" + "ldi r16,0x01 \n\t" //Load r0,r1 into FLASH page buffer + "sts %0,r16 \n\t" + "spm \n\t" + + "inc r17 \n\t" //page_word_count++ + "cpi r17,%1 \n\t" + "brlo same_page \n\t" //Still same page in FLASH + "write_page: \n\t" + "clr r17 \n\t" //New page, write current one first + "rcall wait_spm \n\t" +// "wait_spm4: \n\t" +// "lds r16,%0 \n\t" //Wait for previous spm to complete +// "andi r16,1 \n\t" +// "cpi r16,1 \n\t" +// "breq wait_spm4 \n\t" + "ldi r16,0x05 \n\t" //Write page pointed to by Z + "sts %0,r16 \n\t" + "spm \n\t" + "rcall wait_spm \n\t" +// "wait_spm5: \n\t" +// "lds r16,%0 \n\t" //Wait for previous spm to complete +// "andi r16,1 \n\t" +// "cpi r16,1 \n\t" +// "breq wait_spm5 \n\t" + "ldi r16,0x11 \n\t" //Re-enable RWW section + "sts %0,r16 \n\t" + "spm \n\t" + "same_page: \n\t" + "adiw r30,2 \n\t" //Next word in FLASH + "sbiw r24,2 \n\t" //length-2 + "breq final_write \n\t" //Finished + "rjmp length_loop \n\t" + + "wait_spm: \n\t" + "lds r16,%0 \n\t" //Wait for previous spm to complete + "andi r16,1 \n\t" + "cpi r16,1 \n\t" + "breq wait_spm \n\t" + "ret \n\t" + + "final_write: \n\t" + "cpi r17,0 \n\t" + "breq block_done \n\t" + "adiw r24,2 \n\t" //length+2, fool above check on length after short page write + "rjmp write_page \n\t" + "block_done: \n\t" + "clr __zero_reg__ \n\t" //restore zero register + : "=m" (SPMCR) : "M" (PAGE_SIZE) : "r0","r16","r17","r24","r25","r28","r29","r30","r31"); + + /* Should really add a wait for RWW section to be enabled, don't actually need it since we never */ + /* exit the bootloader without a power cycle anyhow */ + } + putch(0x14); + putch(0x10); + } + } + + /* Read memory block mode, length is big endian. */ + else if(ch=='t') { + length.byte[1] = getch(); + length.byte[0] = getch(); + if (getch() == 'E') flags.eeprom = 1; + else { + flags.eeprom = 0; + address.word = address.word << 1; // address * 2 -> byte location + } + if (getch() == ' ') { // Command terminator + putch(0x14); + for (w=0;w < length.word;w++) { // Can handle odd and even lengths okay + if (flags.eeprom) { // Byte access EEPROM read + putch(eeprom_rb(address.word)); + address.word++; + } else { + if (!flags.rampz) putch(pgm_read_byte_near(address.word)); + address.word++; + } + } + putch(0x10); + } + } + + /* Get device signature bytes */ + else if(ch=='u') { + if (getch() == ' ') { + putch(0x14); + putch(SIG1); + putch(SIG2); + putch(SIG3); + putch(0x10); + } + } + + /* Read oscillator calibration byte */ + else if(ch=='v') { + byte_response(0x00); + } +// } else { +// time_count++; +// if (time_count>=MAX_TIME_COUNT) { +// app_start(); +// } +// } + } /* end of forever loop */ +} + +void putch(char ch) +{ + /* m8 */ + while (!(inb(UCSRA) & _BV(UDRE))); + outb(UDR,ch); +} + +char getch(void) +{ + /* m8 */ + uint32_t count = 0; + while(!(inb(UCSRA) & _BV(RXC))) { + /* HACKME:: here is a good place to count times*/ + count++; + if (count > MAX_TIME_COUNT) + app_start(); + } + return (inb(UDR)); +} + +void getNch(uint8_t count) +{ + uint8_t i; + for(i=0;i<count;i++) { + /* m8 */ + //while(!(inb(UCSRA) & _BV(RXC))); + //inb(UDR); + getch(); // need to handle time out + } +} + +void byte_response(uint8_t val) +{ + if (getch() == ' ') { + putch(0x14); + putch(val); + putch(0x10); + } +} + +void nothing_response(void) +{ + if (getch() == ' ') { + putch(0x14); + putch(0x10); + } +} + +/* end of file ATmegaBOOT.c */ + + + diff --git a/test/ardmake/hardware/bootloaders/atmega8/ATmegaBOOT.hex b/test/ardmake/hardware/bootloaders/atmega8/ATmegaBOOT.hex new file mode 100644 index 0000000..6190d48 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/atmega8/ATmegaBOOT.hex @@ -0,0 +1,66 @@ +:101C000012C02BC02AC029C028C027C026C025C0AA
+:101C100024C023C022C021C020C01FC01EC01DC0C0
+:101C20001CC01BC01AC011241FBECFE5D4E0DEBF0C
+:101C3000CDBF10E0A0E6B0E0E8EEFFE102C0059005
+:101C40000D92A236B107D9F711E0A2E6B0E001C0CB
+:101C50001D92AA36B107E1F74FC0D2CFEF92FF92A3
+:101C60000F931F93EE24FF24870113C00894E11CF7
+:101C7000F11C011D111D81E0E81682E1F8068AE7DA
+:101C8000080780E0180728F0E0916200F0916300F7
+:101C900009955F9BEBCF8CB1992787FD90951F919C
+:101CA0000F91FF90EF9008955D9BFECF8CB9089542
+:101CB000D5DF803221F484E1F7DF80E1F5DF08959C
+:101CC0001F93182FCBDF803231F484E1EDDF812FB9
+:101CD000EBDF80E1E9DF1F9108951F93CF93DF933E
+:101CE000182FC0E0D0E002C0B9DF2196C117E0F3A1
+:101CF000DF91CF911F910895CFE5D4E0DEBFCDBF36
+:101D0000000010BC83E389B988E18AB986E880BD08
+:101D1000BD9A1092680130E2E0E0F0E02FE088B375
+:101D2000832788BBCF010197F1F7215027FFF7CF19
+:101D300020E12093680192DF803381F1813399F4AF
+:101D40008DDF8032C1F784E1AFDF81E4ADDF86E56E
+:101D5000ABDF82E5A9DF80E2A7DF89E4A5DF83E5C9
+:101D6000A3DF80E5C7C0803429F478DF8638B0F07F
+:101D700075DF14C0813471F471DF803811F482E0B2
+:101D80001DC1813811F481E019C1823809F015C1F3
+:101D900082E114C1823421F484E19FDF89DFCBCF5B
+:101DA000853411F485E0F9CF8035C1F38135B1F385
+:101DB0008235A1F3853539F451DF809364004EDF1D
+:101DC00080936500EBCF863519F484E086DFF5C09B
+:101DD000843609F093C042DF809367013FDF809330
+:101DE0006601809169018E7F8093690137DF8534B8
+:101DF00029F480916901816080936901C0E0D0E09D
+:101E000006E610E005C02ADFF80181938F012196D4
+:101E10008091660190916701C817D907A0F31EDF72
+:101E2000803209F088CF8091690180FF1FC020E0D7
+:101E300030E0E6E6F0E012C0A0916400B0916500E9
+:101E40008191082EC5D08091640090916500019623
+:101E500090936500809364002F5F3F4F80916601EF
+:101E6000909167012817390738F343C0F894E19936
+:101E7000FECF1127E0916400F0916500EE0FFF1F87
+:101E8000C6E6D0E0809166019091670180FF01C0B5
+:101E90000196103051F422D003E000935700E895EA
+:101EA0001DD001E100935700E8950990199016D0D4
+:101EB00001E000935700E8951395103258F0112770
+:101EC0000DD005E000935700E89508D001E100939C
+:101ED0005700E8953296029739F0DBCF0091570012
+:101EE00001700130D9F30895103011F00296E7CF58
+:101EF000112484E1D9DE80E1D7DE1DCF843709F0DB
+:101F00004BC0ACDE80936701A9DE80936601A6DE3C
+:101F100090916901853421F49160909369010DC01D
+:101F20009E7F909369018091640090916500880F75
+:101F3000991F909365008093640090DE803209F0D1
+:101F4000FACE84E1B1DEC0E0D0E01EC0809169012C
+:101F500080FF07C0A0916400B091650031D0802D52
+:101F600008C081FD07C0E0916400F0916500E49134
+:101F70008E2F9ADE80916400909165000196909377
+:101F800065008093640021968091660190916701BD
+:101F9000C817D907D8F2AFCF853761F45FDE80323A
+:101FA00009F0C9CE84E180DE8EE17EDE83E97CDE4D
+:101FB00087E0A0CF863709F0BECE80E081DEBBCEC1
+:101FC000E199FECFBFBBAEBBE09A11960DB208956A
+:101FD000E199FECFBFBBAEBB0DBA11960FB6F89418
+:081FE000E29AE19A0FBE089598
+:021FE800800077
+:0400000300001C00DD
+:00000001FF
diff --git a/test/ardmake/hardware/bootloaders/atmega8/Makefile b/test/ardmake/hardware/bootloaders/atmega8/Makefile new file mode 100644 index 0000000..8c0edd3 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/atmega8/Makefile @@ -0,0 +1,88 @@ +# Makefile for ATmegaBOOT +# E.Lins, 2004-10-14 + +# program name should not be changed... +PROGRAM = ATmegaBOOT + +PRODUCT=atmega8 + +# enter the parameters for the UISP isp tool +ISPPARAMS = -dprog=stk500 -dserial=$(SERIAL) -dspeed=115200 + + +#DIRAVR = /usr/local/avr +DIRAVRBIN = $(DIRAVR)/bin +DIRAVRUTILS = $(DIRAVR)/utils/bin +DIRINC = $(DIRAVR)/include +DIRLIB = $(DIRAVR)/avr/lib + + +MCU_TARGET = atmega8 +LDSECTION = --section-start=.text=0x1c00 +FUSE_L = 0xdf +FUSE_H = 0xca +ISPFUSES = $(DIRAVRBIN)/uisp -dpart=ATmega8 $(ISPPARAMS) --wr_fuse_l=$(FUSE_L) --wr_fuse_h=$(FUSE_H) +ISPFLASH = $(DIRAVRBIN)/uisp -dpart=ATmega8 $(ISPPARAMS) --erase --upload if=$(PROGRAM).hex -v + + +OBJ = $(PROGRAM).o +OPTIMIZE = -Os + +DEFS = -DF_CPU=16000000 -DBAUD_RATE=19200 +LIBS = + +CC = $(DIRAVRBIN)/avr-gcc + + +# Override is only needed by avr-lib build system. + +override CFLAGS = -g -Wall $(OPTIMIZE) -mmcu=$(MCU_TARGET) -D$(PRODUCT) $(DEFS) -I$(DIRINC) +override LDFLAGS = -Wl,-Map,$(PROGRAM).map,$(LDSECTION) + +OBJCOPY = $(DIRAVRBIN)/avr-objcopy +OBJDUMP = $(DIRAVRBIN)/avr-objdump +SIZE = $(DIRAVRBIN)/avr-size + +all: $(PROGRAM).elf lst text asm size + +isp: $(PROGRAM).hex + $(ISPFUSES) + $(ISPFLASH) + +$(PROGRAM).elf: $(OBJ) + $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $^ $(LIBS) + +clean: + rm -rf *.s + rm -rf *.o *.elf + rm -rf *.lst *.map + +asm: $(PROGRAM).s + +%.s: %.c + $(CC) -S $(CFLAGS) -g1 $^ + +lst: $(PROGRAM).lst + +%.lst: %.elf + $(OBJDUMP) -h -S $< > $@ + +size: $(PROGRAM).hex + $(SIZE) $^ + +# Rules for building the .text rom images + +text: hex bin srec + +hex: $(PROGRAM).hex +bin: $(PROGRAM).bin +srec: $(PROGRAM).srec + +%.hex: %.elf + $(OBJCOPY) -j .text -j .data -O ihex $< $@ + +%.srec: %.elf + $(OBJCOPY) -j .text -j .data -O srec $< $@ + +%.bin: %.elf + $(OBJCOPY) -j .text -j .data -O binary $< $@ diff --git a/test/ardmake/hardware/bootloaders/bt/ATmegaBOOT_168.c b/test/ardmake/hardware/bootloaders/bt/ATmegaBOOT_168.c new file mode 100644 index 0000000..c73eefa --- /dev/null +++ b/test/ardmake/hardware/bootloaders/bt/ATmegaBOOT_168.c @@ -0,0 +1,1038 @@ +/**********************************************************/ +/* Serial Bootloader for Atmel megaAVR Controllers */ +/* */ +/* tested with ATmega8, ATmega128 and ATmega168 */ +/* should work with other mega's, see code for details */ +/* */ +/* ATmegaBOOT.c */ +/* */ +/* build: 050815 */ +/* date : 15.08.2005 */ +/* */ +/* 20060802: hacked for Arduino by D. Cuartielles */ +/* based on a previous hack by D. Mellis */ +/* and D. Cuartielles */ +/* */ +/* Monitor and debug functions were added to the original */ +/* code by Dr. Erik Lins, chip45.com. (See below) */ +/* */ +/* Thanks to Karl Pitrich for fixing a bootloader pin */ +/* problem and more informative LED blinking! */ +/* */ +/* For the latest version see: */ +/* http://www.chip45.com/ */ +/* */ +/* ------------------------------------------------------ */ +/* */ +/* based on stk500boot.c */ +/* Copyright (c) 2003, Jason P. Kyle */ +/* All rights reserved. */ +/* see avr1.org for original file and information */ +/* */ +/* This program is free software; you can redistribute it */ +/* and/or modify it under the terms of the GNU General */ +/* Public License as published by the Free Software */ +/* Foundation; either version 2 of the License, or */ +/* (at your option) any later version. */ +/* */ +/* This program is distributed in the hope that it will */ +/* be useful, but WITHOUT ANY WARRANTY; without even the */ +/* implied warranty of MERCHANTABILITY or FITNESS FOR A */ +/* PARTICULAR PURPOSE. See the GNU General Public */ +/* License for more details. */ +/* */ +/* You should have received a copy of the GNU General */ +/* Public License along with this program; if not, write */ +/* to the Free Software Foundation, Inc., */ +/* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +/* */ +/* Licence can be viewed at */ +/* http://www.fsf.org/licenses/gpl.txt */ +/* */ +/* Target = Atmel AVR m128,m64,m32,m16,m8,m162,m163,m169, */ +/* m8515,m8535. ATmega161 has a very small boot block so */ +/* isn't supported. */ +/* */ +/* Tested with m128,m8,m163 - feel free to let me know */ +/* how/if it works for you. */ +/* */ +/**********************************************************/ + + +/* some includes */ +#include <inttypes.h> +#include <avr/io.h> +#include <avr/pgmspace.h> +#include <avr/interrupt.h> +#include <avr/wdt.h> + + +#define set_output(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit)) +#define set_input(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit)) + + +#define high(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit)) +#define low(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit)) + + + + +/* the current avr-libc eeprom functions do not support the ATmega168 */ +/* own eeprom write/read functions are used instead */ +#if !defined(__AVR_ATmega168__) || !defined(__AVR_ATmega328P__) +#include <avr/eeprom.h> +#endif + +/* define F_CPU according to AVR_FREQ set in Makefile */ +/* Is there a better way to pass such a parameter from Makefile to source code ? */ + +#define F_CPU 16000000L + +#include <util/delay.h> + + +/* 20060803: hacked by DojoCorp */ +/* set the waiting time for the bootloader */ +#define MAX_TIME_COUNT (F_CPU>>1) + +/* set the UART baud rate */ +/* 20060803: hacked by DojoCorp */ +#define BAUD_RATE 115200 + + +/* SW_MAJOR and MINOR needs to be updated from time to time to avoid warning message from AVR Studio */ +/* never allow AVR Studio to do an update !!!! */ +#define HW_VER 0x02 +#define SW_MAJOR 0x01 +#define SW_MINOR 0x0f + + +/* Adjust to suit whatever pin your hardware uses to enter the bootloader */ +/* ATmega128 has two UARTS so two pins are used to enter bootloader and select UART */ +/* BL0... means UART0, BL1... means UART1 */ +#ifdef __AVR_ATmega128__ +#define BL_DDR DDRF +#define BL_PORT PORTF +#define BL_PIN PINF +#define BL0 PINF7 +#define BL1 PINF6 +#else +/* other ATmegas have only one UART, so only one pin is defined to enter bootloader */ +#define BL_DDR DDRD +#define BL_PORT PORTD +#define BL_PIN PIND +#define BL PIND6 +#endif + + +/* onboard LED is used to indicate, that the bootloader was entered (3x flashing) */ +/* if monitor functions are included, LED goes on after monitor was entered */ +#ifdef __AVR_ATmega128__ +/* Onboard LED is connected to pin PB7 (e.g. Crumb128, PROBOmega128, Savvy128) */ +#define LED_DDR DDRB +#define LED_PORT PORTB +#define LED_PIN PINB +#define LED PINB7 +#else +/* Onboard LED is connected to pin PB2 (e.g. Crumb8, Crumb168) */ +#define LED_DDR DDRB +#define LED_PORT PORTB +#define LED_PIN PINB +/* 20060803: hacked by DojoCorp, LED pin is B5 in Arduino */ +/* #define LED PINB2 */ +#define LED PINB5 +#endif + + +/* monitor functions will only be compiled when using ATmega128, due to bootblock size constraints */ +#ifdef __AVR_ATmega128__ +#define MONITOR +#endif + + +/* define various device id's */ +/* manufacturer byte is always the same */ +#define SIG1 0x1E // Yep, Atmel is the only manufacturer of AVR micros. Single source :( + +#if defined __AVR_ATmega128__ +#define SIG2 0x97 +#define SIG3 0x02 +#define PAGE_SIZE 0x80U //128 words + +#elif defined __AVR_ATmega64__ +#define SIG2 0x96 +#define SIG3 0x02 +#define PAGE_SIZE 0x80U //128 words + +#elif defined __AVR_ATmega32__ +#define SIG2 0x95 +#define SIG3 0x02 +#define PAGE_SIZE 0x40U //64 words + +#elif defined __AVR_ATmega16__ +#define SIG2 0x94 +#define SIG3 0x03 +#define PAGE_SIZE 0x40U //64 words + +#elif defined __AVR_ATmega8__ +#define SIG2 0x93 +#define SIG3 0x07 +#define PAGE_SIZE 0x20U //32 words + +#elif defined __AVR_ATmega88__ +#define SIG2 0x93 +#define SIG3 0x0a +#define PAGE_SIZE 0x20U //32 words + +#elif defined __AVR_ATmega168__ +#define SIG2 0x94 +#define SIG3 0x06 +#define PAGE_SIZE 0x40U //64 words + +#elif defined __AVR_ATmega328P__ +#define SIG2 0x95 +#define SIG3 0x0F +#define PAGE_SIZE 0x40U //64 words + +#elif defined __AVR_ATmega162__ +#define SIG2 0x94 +#define SIG3 0x04 +#define PAGE_SIZE 0x40U //64 words + +#elif defined __AVR_ATmega163__ +#define SIG2 0x94 +#define SIG3 0x02 +#define PAGE_SIZE 0x40U //64 words + +#elif defined __AVR_ATmega169__ +#define SIG2 0x94 +#define SIG3 0x05 +#define PAGE_SIZE 0x40U //64 words + +#elif defined __AVR_ATmega8515__ +#define SIG2 0x93 +#define SIG3 0x06 +#define PAGE_SIZE 0x20U //32 words + +#elif defined __AVR_ATmega8535__ +#define SIG2 0x93 +#define SIG3 0x08 +#define PAGE_SIZE 0x20U //32 words +#endif + + +/* function prototypes */ +void putch(char); +char getch(void); +void getNch(uint8_t); +void byte_response(uint8_t); +void nothing_response(void); +char gethex(void); +void puthex(char); +void flash_led(uint8_t); + +/* some variables */ +union address_union { + uint16_t word; + uint8_t byte[2]; +} address; + +union length_union { + uint16_t word; + uint8_t byte[2]; +} length; + +struct flags_struct { + unsigned eeprom : 1; + unsigned rampz : 1; +} flags; + +uint8_t buff[256]; +uint8_t address_high; + +uint8_t pagesz=0x80; + +uint8_t i; +uint8_t bootuart = 0; + +void (*app_start)(void) = 0x0000; + + +/* main program starts here */ +int main(void) +{ + uint8_t ch,ch2; + uint16_t w; + + asm volatile("nop\n\t"); + + /* set pin direction for bootloader pin and enable pullup */ + /* for ATmega128, two pins need to be initialized */ +#ifdef __AVR_ATmega128__ + BL_DDR &= ~_BV(BL0); + BL_DDR &= ~_BV(BL1); + BL_PORT |= _BV(BL0); + BL_PORT |= _BV(BL1); +#else + BL_DDR &= ~_BV(BL); + BL_PORT |= _BV(BL); +#endif + + +#ifdef __AVR_ATmega128__ + /* check which UART should be used for booting */ + if(bit_is_clear(BL_PIN, BL0)) { + bootuart = 1; + } + else if(bit_is_clear(BL_PIN, BL1)) { + bootuart = 2; + } +#endif + + /* check if flash is programmed already, if not start bootloader anyway */ + if(pgm_read_byte_near(0x0000) != 0xFF) { + +#ifdef __AVR_ATmega128__ + /* no UART was selected, start application */ + if(!bootuart) { + app_start(); + } +#else + /* check if bootloader pin is set low */ + /* we don't start this part neither for the m8, nor m168 */ + //if(bit_is_set(BL_PIN, BL)) { + // app_start(); + // } +#endif + } + +#ifdef __AVR_ATmega128__ + /* no bootuart was selected, default to uart 0 */ + if(!bootuart) { + bootuart = 1; + } +#endif + + + /* initialize UART(s) depending on CPU defined */ +#ifdef __AVR_ATmega128__ + if(bootuart == 1) { + UBRR0L = (uint8_t)(F_CPU/(BAUD_RATE*16L)-1); + UBRR0H = (F_CPU/(BAUD_RATE*16L)-1) >> 8; + UCSR0A = 0x00; + UCSR0C = 0x06; + UCSR0B = _BV(TXEN0)|_BV(RXEN0); + } + if(bootuart == 2) { + UBRR1L = (uint8_t)(F_CPU/(BAUD_RATE*16L)-1); + UBRR1H = (F_CPU/(BAUD_RATE*16L)-1) >> 8; + UCSR1A = 0x00; + UCSR1C = 0x06; + UCSR1B = _BV(TXEN1)|_BV(RXEN1); + } +#elif defined __AVR_ATmega163__ + UBRR = (uint8_t)(F_CPU/(BAUD_RATE*16L)-1); + UBRRHI = (F_CPU/(BAUD_RATE*16L)-1) >> 8; + UCSRA = 0x00; + UCSRB = _BV(TXEN)|_BV(RXEN); +#elif defined(__AVR_ATmega168__) || defined(__AVR_ATmega328P__) + + UBRR0H = ((F_CPU / 16 + BAUD_RATE / 2) / BAUD_RATE - 1) >> 8; + UBRR0L = ((F_CPU / 16 + BAUD_RATE / 2) / BAUD_RATE - 1); + + + //UBRR0L = (uint8_t)(F_CPU/(BAUD_RATE*16L)-1); + //UBRR0H = (F_CPU/(BAUD_RATE*16L)-1) >> 8; + UCSR0B = (1<<RXEN0) | (1<<TXEN0); + UCSR0C = (1<<UCSZ00) | (1<<UCSZ01); +#elif defined __AVR_ATmega8__ + /* m8 */ + UBRRH = (((F_CPU/BAUD_RATE)/16)-1)>>8; // set baud rate + UBRRL = (((F_CPU/BAUD_RATE)/16)-1); + UCSRB = (1<<RXEN)|(1<<TXEN); // enable Rx & Tx + UCSRC = (1<<URSEL)|(1<<UCSZ1)|(1<<UCSZ0); // config USART; 8N1 +#else + /* m16,m32,m169,m8515,m8535 */ + UBRRL = (uint8_t)(F_CPU/(BAUD_RATE*16L)-1); + UBRRH = (F_CPU/(BAUD_RATE*16L)-1) >> 8; + UCSRA = 0x00; + UCSRC = 0x06; + UCSRB = _BV(TXEN)|_BV(RXEN); +#endif + + /* set LED pin as output */ + LED_DDR |= _BV(LED); + + + + set_output(DDRD,PIND7); + high(PORTD,PD7); + for (i = 0; i < 16; i++) { + + _delay_loop_2(0); + } + + + low(PORTD,PD7); + + + /* flash onboard LED to signal entering of bootloader */ +#ifdef __AVR_ATmega128__ + // 4x for UART0, 5x for UART1 + flash_led(3 + bootuart); +#else + flash_led(3); +#endif + + /* 20050803: by DojoCorp, this is one of the parts provoking the + system to stop listening, cancelled from the original */ + //putch('\0'); + + + //message("SET BT PAGEMODE 3 2000 1"); +putch('S'); +putch('E'); +putch('T'); +putch(' '); +putch('B'); +putch('T'); +putch(' '); +putch('P'); +putch('A'); +putch('G'); +putch('E'); +putch('M'); +putch('O'); +putch('D'); +putch('E'); +putch(' '); +putch('3'); +putch(' '); +putch('2'); +putch('0'); +putch('0'); +putch('0'); +putch(' '); +putch('1'); +putch(0x0D); + + + //put_s("SET BT ROLE 0 f 7d00"); + putch('S'); + putch('E'); + putch('T'); + putch(' '); + putch('B'); + putch('T'); + putch(' '); + putch('R'); + putch('O'); + putch('L'); + putch('E'); + putch(' '); + putch('0'); + putch(' '); + putch('f'); + putch(' '); + putch('7'); + putch('d'); + putch('0'); + putch('0'); + putch(0x0D); + + + + + + + /* forever loop */ + for (;;) { + + /* get character from UART */ + ch = getch(); + + /* A bunch of if...else if... gives smaller code than switch...case ! */ + + /* Hello is anyone home ? */ + if(ch=='0') { + nothing_response(); + } + + + /* Request programmer ID */ + /* Not using PROGMEM string due to boot block in m128 being beyond 64kB boundry */ + /* Would need to selectively manipulate RAMPZ, and it's only 9 characters anyway so who cares. */ + else if(ch=='1') { + if (getch() == ' ') { + putch(0x14); + putch('A'); + putch('V'); + putch('R'); + putch(' '); + putch('I'); + putch('S'); + putch('P'); + putch(0x10); + } + } + + + /* AVR ISP/STK500 board commands DON'T CARE so default nothing_response */ + else if(ch=='@') { + ch2 = getch(); + if (ch2>0x85) getch(); + nothing_response(); + } + + + /* AVR ISP/STK500 board requests */ + else if(ch=='A') { + ch2 = getch(); + if(ch2==0x80) byte_response(HW_VER); // Hardware version + else if(ch2==0x81) byte_response(SW_MAJOR); // Software major version + else if(ch2==0x82) byte_response(SW_MINOR); // Software minor version + else if(ch2==0x98) byte_response(0x03); // Unknown but seems to be required by avr studio 3.56 + else byte_response(0x00); // Covers various unnecessary responses we don't care about + } + + + /* Device Parameters DON'T CARE, DEVICE IS FIXED */ + else if(ch=='B') { + getNch(20); + nothing_response(); + } + + + /* Parallel programming stuff DON'T CARE */ + else if(ch=='E') { + getNch(5); + nothing_response(); + } + + + /* Enter programming mode */ + else if(ch=='P') { + nothing_response(); + } + + + /* Leave programming mode */ + else if(ch=='Q') { + nothing_response(); + } + + + /* Erase device, don't care as we will erase one page at a time anyway. */ + else if(ch=='R') { + nothing_response(); + } + + + /* Set address, little endian. EEPROM in bytes, FLASH in words */ + /* Perhaps extra address bytes may be added in future to support > 128kB FLASH. */ + /* This might explain why little endian was used here, big endian used everywhere else. */ + else if(ch=='U') { + address.byte[0] = getch(); + address.byte[1] = getch(); + nothing_response(); + } + + + /* Universal SPI programming command, disabled. Would be used for fuses and lock bits. */ + else if(ch=='V') { + getNch(4); + byte_response(0x00); + } + + + /* Write memory, length is big endian and is in bytes */ + else if(ch=='d') { + length.byte[1] = getch(); + length.byte[0] = getch(); + flags.eeprom = 0; + if (getch() == 'E') flags.eeprom = 1; + for (w=0;w<length.word;w++) { + buff[w] = getch(); // Store data in buffer, can't keep up with serial data stream whilst programming pages + } + if (getch() == ' ') { + if (flags.eeprom) { //Write to EEPROM one byte at a time + for(w=0;w<length.word;w++) { +#if defined(__AVR_ATmega168__) || defined(__AVR_ATmega328P__) + while(EECR & (1<<EEPE)); + EEAR = (uint16_t)(void *)address.word; + EEDR = buff[w]; + EECR |= (1<<EEMPE); + EECR |= (1<<EEPE); +#else + eeprom_write_byte((void *)address.word,buff[w]); +#endif + address.word++; + } + } + else { //Write to FLASH one page at a time + if (address.byte[1]>127) address_high = 0x01; //Only possible with m128, m256 will need 3rd address byte. FIXME + else address_high = 0x00; +#ifdef __AVR_ATmega128__ + RAMPZ = address_high; +#endif + address.word = address.word << 1; //address * 2 -> byte location + /* if ((length.byte[0] & 0x01) == 0x01) length.word++; //Even up an odd number of bytes */ + if ((length.byte[0] & 0x01)) length.word++; //Even up an odd number of bytes + cli(); //Disable interrupts, just to be sure + // HACKME: EEPE used to be EEWE + while(bit_is_set(EECR,EEPE)); //Wait for previous EEPROM writes to complete + asm volatile( + "clr r17 \n\t" //page_word_count + "lds r30,address \n\t" //Address of FLASH location (in bytes) + "lds r31,address+1 \n\t" + "ldi r28,lo8(buff) \n\t" //Start of buffer array in RAM + "ldi r29,hi8(buff) \n\t" + "lds r24,length \n\t" //Length of data to be written (in bytes) + "lds r25,length+1 \n\t" + "length_loop: \n\t" //Main loop, repeat for number of words in block + "cpi r17,0x00 \n\t" //If page_word_count=0 then erase page + "brne no_page_erase \n\t" + "wait_spm1: \n\t" + "lds r16,%0 \n\t" //Wait for previous spm to complete + "andi r16,1 \n\t" + "cpi r16,1 \n\t" + "breq wait_spm1 \n\t" + "ldi r16,0x03 \n\t" //Erase page pointed to by Z + "sts %0,r16 \n\t" + "spm \n\t" +#ifdef __AVR_ATmega163__ + ".word 0xFFFF \n\t" + "nop \n\t" +#endif + "wait_spm2: \n\t" + "lds r16,%0 \n\t" //Wait for previous spm to complete + "andi r16,1 \n\t" + "cpi r16,1 \n\t" + "breq wait_spm2 \n\t" + + "ldi r16,0x11 \n\t" //Re-enable RWW section + "sts %0,r16 \n\t" + "spm \n\t" +#ifdef __AVR_ATmega163__ + ".word 0xFFFF \n\t" + "nop \n\t" +#endif + "no_page_erase: \n\t" + "ld r0,Y+ \n\t" //Write 2 bytes into page buffer + "ld r1,Y+ \n\t" + + "wait_spm3: \n\t" + "lds r16,%0 \n\t" //Wait for previous spm to complete + "andi r16,1 \n\t" + "cpi r16,1 \n\t" + "breq wait_spm3 \n\t" + "ldi r16,0x01 \n\t" //Load r0,r1 into FLASH page buffer + "sts %0,r16 \n\t" + "spm \n\t" + + "inc r17 \n\t" //page_word_count++ + "cpi r17,%1 \n\t" + "brlo same_page \n\t" //Still same page in FLASH + "write_page: \n\t" + "clr r17 \n\t" //New page, write current one first + "wait_spm4: \n\t" + "lds r16,%0 \n\t" //Wait for previous spm to complete + "andi r16,1 \n\t" + "cpi r16,1 \n\t" + "breq wait_spm4 \n\t" +#ifdef __AVR_ATmega163__ + "andi r30,0x80 \n\t" // m163 requires Z6:Z1 to be zero during page write +#endif + "ldi r16,0x05 \n\t" //Write page pointed to by Z + "sts %0,r16 \n\t" + "spm \n\t" +#ifdef __AVR_ATmega163__ + ".word 0xFFFF \n\t" + "nop \n\t" + "ori r30,0x7E \n\t" // recover Z6:Z1 state after page write (had to be zero during write) +#endif + "wait_spm5: \n\t" + "lds r16,%0 \n\t" //Wait for previous spm to complete + "andi r16,1 \n\t" + "cpi r16,1 \n\t" + "breq wait_spm5 \n\t" + "ldi r16,0x11 \n\t" //Re-enable RWW section + "sts %0,r16 \n\t" + "spm \n\t" +#ifdef __AVR_ATmega163__ + ".word 0xFFFF \n\t" + "nop \n\t" +#endif + "same_page: \n\t" + "adiw r30,2 \n\t" //Next word in FLASH + "sbiw r24,2 \n\t" //length-2 + "breq final_write \n\t" //Finished + "rjmp length_loop \n\t" + "final_write: \n\t" + "cpi r17,0 \n\t" + "breq block_done \n\t" + "adiw r24,2 \n\t" //length+2, fool above check on length after short page write + "rjmp write_page \n\t" + "block_done: \n\t" + "clr __zero_reg__ \n\t" //restore zero register +#if defined __AVR_ATmega168__ || __AVR_ATmega328P__ + : "=m" (SPMCSR) : "M" (PAGE_SIZE) : "r0","r16","r17","r24","r25","r28","r29","r30","r31" +#else + : "=m" (SPMCR) : "M" (PAGE_SIZE) : "r0","r16","r17","r24","r25","r28","r29","r30","r31" +#endif + ); + /* Should really add a wait for RWW section to be enabled, don't actually need it since we never */ + /* exit the bootloader without a power cycle anyhow */ + } + putch(0x14); + putch(0x10); + } + } + + + /* Read memory block mode, length is big endian. */ + else if(ch=='t') { + length.byte[1] = getch(); + length.byte[0] = getch(); +#if defined __AVR_ATmega128__ + if (address.word>0x7FFF) flags.rampz = 1; // No go with m256, FIXME + else flags.rampz = 0; +#endif + if (getch() == 'E') flags.eeprom = 1; + else { + flags.eeprom = 0; + address.word = address.word << 1; // address * 2 -> byte location + } + if (getch() == ' ') { // Command terminator + putch(0x14); + for (w=0;w < length.word;w++) { // Can handle odd and even lengths okay + if (flags.eeprom) { // Byte access EEPROM read +#if defined __AVR_ATmega168__ || __AVR_ATmega328P__ + while(EECR & (1<<EEPE)); + EEAR = (uint16_t)(void *)address.word; + EECR |= (1<<EERE); + putch(EEDR); +#else + putch(eeprom_read_byte((void *)address.word)); +#endif + address.word++; + } + else { + + if (!flags.rampz) putch(pgm_read_byte_near(address.word)); +#if defined __AVR_ATmega128__ + else putch(pgm_read_byte_far(address.word + 0x10000)); + // Hmmmm, yuck FIXME when m256 arrvies +#endif + address.word++; + } + } + putch(0x10); + } + } + + + /* Get device signature bytes */ + else if(ch=='u') { + if (getch() == ' ') { + putch(0x14); + putch(SIG1); + putch(SIG2); + putch(SIG3); + putch(0x10); + } + } + + + /* Read oscillator calibration byte */ + else if(ch=='v') { + byte_response(0x00); + } + + +#ifdef MONITOR + + /* here come the extended monitor commands by Erik Lins */ + + /* check for three times exclamation mark pressed */ + else if(ch=='!') { + ch = getch(); + if(ch=='!') { + ch = getch(); + if(ch=='!') { + +#ifdef __AVR_ATmega128__ + uint16_t extaddr; +#endif + uint8_t addrl, addrh; + +#ifdef CRUMB128 + PGM_P welcome = {"ATmegaBOOT / Crumb128 - (C) J.P.Kyle, E.Lins - 050815\n\r"}; +#elif defined PROBOMEGA128 + PGM_P welcome = {"ATmegaBOOT / PROBOmega128 - (C) J.P.Kyle, E.Lins - 050815\n\r"}; +#elif defined SAVVY128 + PGM_P welcome = {"ATmegaBOOT / Savvy128 - (C) J.P.Kyle, E.Lins - 050815\n\r"}; +#endif + + /* turn on LED */ + LED_DDR |= _BV(LED); + LED_PORT &= ~_BV(LED); + + /* print a welcome message and command overview */ + for(i=0; welcome[i] != '\0'; ++i) { + putch(welcome[i]); + } + + /* test for valid commands */ + for(;;) { + putch('\n'); + putch('\r'); + putch(':'); + putch(' '); + + ch = getch(); + putch(ch); + + /* toggle LED */ + if(ch == 't') { + if(bit_is_set(LED_PIN,LED)) { + LED_PORT &= ~_BV(LED); + putch('1'); + } else { + LED_PORT |= _BV(LED); + putch('0'); + } + + } + + /* read byte from address */ + else if(ch == 'r') { + ch = getch(); putch(ch); + addrh = gethex(); + addrl = gethex(); + putch('='); + ch = *(uint8_t *)((addrh << 8) + addrl); + puthex(ch); + } + + /* write a byte to address */ + else if(ch == 'w') { + ch = getch(); putch(ch); + addrh = gethex(); + addrl = gethex(); + ch = getch(); putch(ch); + ch = gethex(); + *(uint8_t *)((addrh << 8) + addrl) = ch; + + } + + /* read from uart and echo back */ + else if(ch == 'u') { + for(;;) { + putch(getch()); + } + } +#ifdef __AVR_ATmega128__ + /* external bus loop */ + else if(ch == 'b') { + putch('b'); + putch('u'); + putch('s'); + MCUCR = 0x80; + XMCRA = 0; + XMCRB = 0; + extaddr = 0x1100; + for(;;) { + ch = *(volatile uint8_t *)extaddr; + if(++extaddr == 0) { + extaddr = 0x1100; + } + } + } +#endif + + else if(ch == 'j') { + app_start(); + } + + } + /* end of monitor functions */ + + } + } + } + /* end of monitor */ +#endif + + + } + /* end of forever loop */ + +} + + +char gethex(void) { + char ah,al; + + ah = getch(); putch(ah); + al = getch(); putch(al); + if(ah >= 'a') { + ah = ah - 'a' + 0x0a; + } else if(ah >= '0') { + ah -= '0'; + } + if(al >= 'a') { + al = al - 'a' + 0x0a; + } else if(al >= '0') { + al -= '0'; + } + return (ah << 4) + al; +} + + +void puthex(char ch) { + char ah,al; + + ah = (ch & 0xf0) >> 4; + if(ah >= 0x0a) { + ah = ah - 0x0a + 'a'; + } else { + ah += '0'; + } + al = (ch & 0x0f); + if(al >= 0x0a) { + al = al - 0x0a + 'a'; + } else { + al += '0'; + } + putch(ah); + putch(al); +} + + +void putch(char ch) +{ +#ifdef __AVR_ATmega128__ + if(bootuart == 1) { + while (!(UCSR0A & _BV(UDRE0))); + UDR0 = ch; + } + else if (bootuart == 2) { + while (!(UCSR1A & _BV(UDRE1))); + UDR1 = ch; + } +#elif defined (__AVR_ATmega168__) || defined(__AVR_ATmega328P__) + while (!(UCSR0A & _BV(UDRE0))); + UDR0 = ch; +#else + /* m8,16,32,169,8515,8535,163 */ + while (!(UCSRA & _BV(UDRE))); + UDR = ch; +#endif +} + + +char getch(void) +{ +#ifdef __AVR_ATmega128__ + if(bootuart == 1) { + while(!(UCSR0A & _BV(RXC0))); + return UDR0; + } + else if(bootuart == 2) { + while(!(UCSR1A & _BV(RXC1))); + return UDR1; + } + return 0; +#elif defined (__AVR_ATmega168__) || defined(__AVR_ATmega328P__) + uint32_t count = 0; + while(!(UCSR0A & _BV(RXC0))){ + /* 20060803 DojoCorp:: Addon coming from the previous Bootloader*/ + /* HACKME:: here is a good place to count times*/ + count++; + if (count > MAX_TIME_COUNT) + app_start(); + } + return UDR0; +#else + /* m8,16,32,169,8515,8535,163 */ + uint32_t count = 0; + while(!(UCSRA & _BV(RXC))){ + /* 20060803 DojoCorp:: Addon coming from the previous Bootloader*/ + /* HACKME:: here is a good place to count times*/ + count++; + if (count > MAX_TIME_COUNT) + app_start(); + } + return UDR; +#endif +} + + +void getNch(uint8_t count) +{ + uint8_t i; + for(i=0;i<count;i++) { +#ifdef __AVR_ATmega128__ + if(bootuart == 1) { + while(!(UCSR0A & _BV(RXC0))); + UDR0; + } + else if(bootuart == 2) { + while(!(UCSR1A & _BV(RXC1))); + UDR1; + } +#elif (defined __AVR_ATmega168__) || defined(__AVR_ATmega328P__) + while(!(UCSR0A & _BV(RXC0))); + UDR0; +#else + /* m8,16,32,169,8515,8535,163 */ + /* 20060803 DojoCorp:: Addon coming from the previous Bootloader*/ + //while(!(UCSRA & _BV(RXC))); + //UDR; + uint8_t i; + for(i=0;i<count;i++) { + getch(); // need to handle time out + } +#endif + } +} + + +void byte_response(uint8_t val) +{ + if (getch() == ' ') { + putch(0x14); + putch(val); + putch(0x10); + } +} + + +void nothing_response(void) +{ + if (getch() == ' ') { + putch(0x14); + putch(0x10); + } +} + +void flash_led(uint8_t count) +{ + /* flash onboard LED three times to signal entering of bootloader */ + uint32_t l; + + if (count == 0) { + count = 3; + } + + for (i = 0; i < count; ++i) { + LED_PORT |= _BV(LED); + for(l = 0; l < (2 * F_CPU); ++l); + LED_PORT &= ~_BV(LED); + for(l = 0; l < (F_CPU / 5); ++l); + } +} + + +/* end of file ATmegaBOOT.c */ diff --git a/test/ardmake/hardware/bootloaders/bt/ATmegaBOOT_168.hex b/test/ardmake/hardware/bootloaders/bt/ATmegaBOOT_168.hex new file mode 100644 index 0000000..036ae54 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/bt/ATmegaBOOT_168.hex @@ -0,0 +1,121 @@ +:103800000C94341C0C944F1C0C944F1C0C944F1CA7 +:103810000C944F1C0C944F1C0C944F1C0C944F1C7C +:103820000C944F1C0C944F1C0C944F1C0C944F1C6C +:103830000C944F1C0C944F1C0C944F1C0C944F1C5C +:103840000C944F1C0C944F1C0C944F1C0C944F1C4C +:103850000C944F1C0C944F1C0C944F1C0C944F1C3C +:103860000C944F1C0C944F1C11241FBECFEFD4E0BE +:10387000DEBFCDBF11E0A0E0B1E0E0E6FFE302C0B3 +:1038800005900D92A230B107D9F712E0A2E0B1E0A5 +:1038900001C01D92AC30B107E1F70C94D61C0C941A +:1038A000001C882309F483E01092090290E0981725 +:1038B000F0F4692F2D9A2FEF37E448EE51E02253B0 +:1038C00030404040504057FFFACF2D982FEF33ED56 +:1038D00040E350E0225330404040504057FFFACF81 +:1038E000962F9F5F692F981728F3909309020895E8 +:1038F000982F8091C00085FFFCCF9093C60008955B +:10390000EF92FF920F931F93EE24FF248701809183 +:10391000C00087FD17C00894E11CF11C011D111D9A +:1039200081E0E81682E1F8068AE7080780E01807D8 +:1039300070F3E0910201F091030109958091C000BC +:1039400087FFE9CF8091C600992787FD90951F9149 +:103950000F91FF90EF9008950E94801C803209F033 +:10396000089584E10E94781C80E10E94781C0895EB +:10397000CF93C82F0E94801C803249F484E10E94BA +:10398000781C8C2F0E94781C80E10E94781CCF91BB +:103990000895282F90E007C08091C0008823E4F7A5 +:1039A0008091C6009F5F9217B8F30895CFEFD4E0DF +:1039B000DEBFCDBF000056985E9A1092C50088E029 +:1039C0008093C40088E18093C10086E08093C200A8 +:1039D000259A579A5F9A109209022FE080E090E0B2 +:1039E0000197F1F7215027FFF9CF20E12093090239 +:1039F0005F9883E00E94511C83E50E94781C85E457 +:103A00000E94781C84E50E94781C80E20E94781C49 +:103A100082E40E94781C84E50E94781C80E20E9467 +:103A2000781C80E50E94781C81E40E94781C87E461 +:103A30000E94781C85E40E94781C8DE40E94781C0A +:103A40008FE40E94781C84E40E94781C85E40E9424 +:103A5000781C80E20E94781C83E30E94781C80E23C +:103A60000E94781C82E30E94781C80E30E94781CEC +:103A700080E30E94781C80E30E94781C80E20E9410 +:103A8000781C81E30E94781C8DE00E94781C83E5FD +:103A90000E94781C85E40E94781C84E50E94781CB2 +:103AA00080E20E94781C82E40E94781C84E50E94D7 +:103AB000781C80E20E94781C82E50E94781C8FE4CA +:103AC0000E94781C8CE40E94781C85E40E94781C7B +:103AD00080E20E94781C80E30E94781C80E20E94B1 +:103AE000781C86E60E94781C80E20E94781C87E39E +:103AF0000E94781C84E60E94781C80E30E94781C57 +:103B000080E30E94781C8DE00E94781C0E94801C3B +:103B1000803361F1813369F1803409F449C0813423 +:103B200009F44FC0823409F45DC0853409F460C0E3 +:103B30008035E1F08135D1F08235C1F0853509F469 +:103B40005BC0863509F463C0843609F465C08437E8 +:103B500009F4B9C0853709F414C18637B9F680E095 +:103B60000E94B81C0E94801C8033A1F60E94AC1CED +:103B7000CDCF0E94801CC82F803241F684E10E9484 +:103B8000781C81E40E94781C86E50E94781C82E5FE +:103B90000E94781C8C2F0E94781C89E40E94781C5B +:103BA00083E50E94781C80E50E94781C80E1ACCF00 +:103BB0000E94801C8638D0F20E94801C0E94AC1C9F +:103BC000A5CF0E94801C803809F4EDC0813809F42B +:103BD000EEC0823809F4EFC0883909F683E00E940C +:103BE000B81CC0CF84E10E94C91C0E94AC1C8ECFBF +:103BF00085E00E94C91CF9CF0E94801C80930501BA +:103C00000E94801C809306010E94AC1C7FCF84E040 +:103C10000E94C91C80E0A4CF0E94801C80930802EF +:103C20000E94801C8093070280910B028E7F8093FC +:103C30000B020E94801C853409F4C1C000E010E032 +:103C400080910702909108021816190670F4C7E0D7 +:103C5000D1E00E94801C89930F5F1F4F8091070263 +:103C60009091080208171907A0F30E94801C803267 +:103C700009F04CCF80910B0280FFADC000E010E056 +:103C8000209107023091080212161306C0F4E09149 +:103C90000501F0910601A7E0B1E0F999FECFF2BD70 +:103CA000E1BD8D9180BDFA9AF99A31960F5F1F4F51 +:103CB0000217130790F3F0930601E093050184E1E6 +:103CC0000E94781C73CF0E94801C809308020E947F +:103CD000801C809307020E94801C853409F475C003 +:103CE00080910B028E7F80930B0280910501909151 +:103CF0000601880F991F90930601809305010E9489 +:103D0000801C803209F002CF84E10E94781C00E020 +:103D100010E020910702309108021216130608F0F5 +:103D200045CFE0910501F091060180910B0280FFE3 +:103D30001FC0F999FECFF2BDE1BDF89A80B50E948F +:103D4000781CE0910501F09106013196F09306018F +:103D5000E093050120910702309108020F5F1F4F89 +:103D60000217130708F022CF80910B0280FDE1CFEC +:103D7000869580FF9BC03196F0930601E093050184 +:103D8000EDCF0E94801C803209F0C0CE84E10E94F9 +:103D9000781C8EE10E94781C84E90E94781C86E0E1 +:103DA0000E94781C03CF82E00E94B81CDBCE81E029 +:103DB0000E94B81CD7CE8FE00E94B81CD3CE809151 +:103DC0000B02816080930B0239CF80910B028160DE +:103DD00080930B0294CF8091060187FD73C01092EF +:103DE0000A028091050190910601880F991F909316 +:103DF0000601809305018091070280FF09C0809130 +:103E0000070290910802019690930802809307029E +:103E1000F894F999FECF1127E0910501F091060180 +:103E2000C7E0D1E08091070290910802103091F430 +:103E30000091570001700130D9F303E0009357005F +:103E4000E8950091570001700130D9F301E100932A +:103E50005700E895099019900091570001700130C2 +:103E6000D9F301E000935700E8951395103498F0CA +:103E700011270091570001700130D9F305E000933C +:103E80005700E8950091570001700130D9F301E126 +:103E900000935700E8953296029709F0C7CF10308B +:103EA00011F00296E5CF112484E10ACF84910E949B +:103EB000781C2091070230910802E0910501F091F1 +:103EC000060159CF81E080930A028BCF1F93CF93D5 +:103ED0000E94801CC82F0E94781C0E94801C182FF2 +:103EE0000E94781CC1362CF0C75511363CF017558E +:103EF00008C0C033D4F3C0531136CCF710330CF0E4 +:103F00001053C295C07FC10F8C2F992787FD9095C4 +:103F1000CF911F910895CF93282F992787FD9095D2 +:103F2000807F9070959587959595879595958795C0 +:103F3000959587958A303CF0895AC22FCF70CA3048 +:103F40003CF0C95A06C0805DC22FCF70CA30CCF792 +:103F5000C05D0E94781C8C2F0E94781CCF91089520 +:023F60008000DF +:0400000300003800C1 +:00000001FF diff --git a/test/ardmake/hardware/bootloaders/bt/ATmegaBOOT_168_atmega328_bt.hex b/test/ardmake/hardware/bootloaders/bt/ATmegaBOOT_168_atmega328_bt.hex new file mode 100644 index 0000000..a50c7c3 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/bt/ATmegaBOOT_168_atmega328_bt.hex @@ -0,0 +1,162 @@ +:107000000C9434380C9451380C9451380C945138F9
+:107010000C9451380C9451380C9451380C945138CC
+:107020000C9451380C9451380C9451380C945138BC
+:107030000C9451380C9451380C9451380C945138AC
+:107040000C9451380C9451380C9451380C9451389C
+:107050000C9451380C9451380C9451380C9451388C
+:107060000C9451380C94513811241FBECFEFD8E046
+:10707000DEBFCDBF11E0A0E0B1E0E4EEF9E702C071
+:1070800005900D92A230B107D9F712E0A2E0B1E06D
+:1070900001C01D92AC30B107E1F70E942D390C946C
+:1070A000F03C0C940038282F992787FD9095807F1D
+:1070B00090709595879595958795959587959595D4
+:1070C00087958A30C4F0382F395A822F8F708A30D2
+:1070D0007CF0982F995A8091C00085FFFCCF3093A7
+:1070E000C6008091C00085FFFCCF9093C600089534
+:1070F000982F905DF0CF382F305DE7CF982F80919B
+:10710000C00085FFFCCF9093C6000895EF92FF92D8
+:107110000F931F93EE24FF2487018091C00087FD09
+:1071200017C00894E11CF11C011D111D81E0E81637
+:1071300082E1F8068AE7080780E0180770F3E0911B
+:107140000301F091040109958091C00087FFE9CF08
+:107150008091C6001F910F91FF90EF9008951F93AB
+:107160000E948638182F8091C00085FFFCCF1093B5
+:10717000C6000E948638982F8091C00085FFFCCF02
+:107180009093C600113664F01755913674F490331D
+:107190000CF090531295107F892F810F1F91089545
+:1071A00010339CF31053913694F397551295107F3A
+:1071B000892F810F1F910895282F882351F090E087
+:1071C0008091C00087FFFCCF8091C6009F5F92171F
+:1071D000B8F308951F93182F0E948638803211F05B
+:1071E0001F9108958091C00085FFFCCF84E18093BA
+:1071F000C6008091C00085FFFCCF1093C60080912F
+:10720000C00085FFFCCF80E18093C6001F910895E8
+:107210000E948638803209F008958091C00085FF71
+:10722000FCCF84E18093C6008091C00085FFFCCF35
+:1072300080E18093C6000895882359F010920902D6
+:1072400090E02D9A2D989F5F9817D8F3909309029C
+:1072500008951092090283E0F3CF3F924F925F921C
+:107260006F927F928F929F92AF92BF92CF92DF9256
+:10727000EF92FF920F931F93CF93DF9300005698E6
+:107280005E9A1092C50088E08093C40088E18093E4
+:10729000C10086E08093C200259A579A5F9A21E048
+:1072A00040E050E0CA010197F1F72F5F2131D1F79B
+:1072B00080E1809309025F9883E00E941C398091ED
+:1072C000C00085FFFCCF83E58093C6008091C0009D
+:1072D00085FFFCCF85E48093C6008091C00085FFC8
+:1072E000FCCF84E58093C6008091C00085FFFCCF71
+:1072F00080E28093C6008091C00085FFFCCF82E4CD
+:107300008093C6008091C00085FFFCCF84E5809308
+:10731000C6008091C00085FFFCCF80E28093C6004C
+:107320008091C00085FFFCCF80E58093C6008091EE
+:10733000C00085FFFCCF81E48093C6008091C0002F
+:1073400085FFFCCF87E48093C6008091C00085FF55
+:10735000FCCF85E48093C6008091C00085FFFCCF00
+:107360008DE48093C6008091C00085FFFCCF8FE440
+:107370008093C6008091C00085FFFCCF84E4809399
+:10738000C6008091C00085FFFCCF85E48093C600D5
+:107390008091C00085FFFCCF80E28093C600809181
+:1073A000C00085FFFCCF83E38093C6008091C000BE
+:1073B00085FFFCCF80E28093C6008091C00085FFEE
+:1073C000FCCF82E38093C6008091C00085FFFCCF94
+:1073D00080E38093C6008091C00085FFFCCF80E3EE
+:1073E0008093C6008091C00085FFFCCF80E380932E
+:1073F000C6008091C00085FFFCCF80E28093C6006C
+:107400008091C00085FFFCCF81E38093C60080910E
+:10741000C00085FFFCCF8DE08093C6008091C00046
+:1074200085FFFCCF83E58093C6008091C00085FF77
+:10743000FCCF85E48093C6008091C00085FFFCCF1F
+:1074400084E58093C6008091C00085FFFCCF80E278
+:107450008093C6008091C00085FFFCCF82E48093BA
+:10746000C6008091C00085FFFCCF84E58093C600F4
+:107470008091C00085FFFCCF80E28093C6008091A0
+:10748000C00085FFFCCF82E58093C6008091C000DC
+:1074900085FFFCCF8FE48093C6008091C00085FFFC
+:1074A000FCCF8CE48093C6008091C00085FFFCCFA8
+:1074B00085E48093C6008091C00085FFFCCF80E208
+:1074C0008093C6008091C00085FFFCCF80E380934D
+:1074D000C6008091C00085FFFCCF80E28093C6008B
+:1074E0008091C00085FFFCCF86E68093C600809126
+:1074F000C00085FFFCCF80E28093C6008091C00071
+:1075000085FFFCCF87E38093C6008091C00085FF94
+:10751000FCCF84E68093C6008091C00085FFFCCF3D
+:1075200080E38093C6008091C00085FFFCCF80E39C
+:107530008093C6008091C00085FFFCCF8DE08093D2
+:10754000C60034E1F32E2EE1E22E95E9D92E8FE02C
+:10755000C82E00E1B02EAA24A39411E4912EB6E522
+:107560008B2EA2E57A2EF0E26F2EE9E45E2E73E513
+:10757000472E60E5362E0E948638803359F18133DC
+:10758000C9F1803409F472C0813409F486C08234B0
+:1075900021F1853409F474C08035E1F08135D1F0F2
+:1075A0008235C1F0853509F497C0863509F486C067
+:1075B000843609F4A0C0843709F40BC1853709F477
+:1075C00075C18637C1F680E00E94EA380E9486388D
+:1075D0008033A9F60E940839CECF90E08091C00098
+:1075E00087FFFCCF8091C6009F5F9431B9F70E945E
+:1075F0000839C1CF0E948638803209F0BCCF809113
+:10760000C00085FFFCCFF092C6008091C00085FFCE
+:10761000FCCF9092C6008091C00085FFFCCF809285
+:10762000C6008091C00085FFFCCF7092C60080919B
+:10763000C00085FFFCCF6092C6008091C00085FF2E
+:10764000FCCF5092C6008091C00085FFFCCF4092D5
+:10765000C6008091C00085FFFCCF3092C6008091AB
+:10766000C00085FFFCCFB092C60085CF0E9486384F
+:10767000863808F4AFCF0E9486380E9408397BCF45
+:1076800090E08091C00087FFFCCF8091C6009F5F93
+:107690009530B9F70E9408396ECF0E94863880383D
+:1076A00031F1813809F48DC0823809F48EC08839EF
+:1076B00009F089CF83E00E94EA385DCF90E08091A5
+:1076C000C00087FFFCCF8091C6009F5F9430B9F760
+:1076D00080E00E94EA387ACF0E94863880930501C4
+:1076E0000E948638809306010E94083944CF82E0C8
+:1076F0000E94EA3840CF0E948638809308020E9498
+:1077000086388093070280910B028E7F80930B0254
+:107710000E948638853429F480910B028160809321
+:107720000B028091070290910802892B89F000E0FA
+:1077300010E00E948638F801E95FFE4F80830F5FFA
+:107740001F4F80910702909108020817190788F3CC
+:107750000E948638803209F00ECF80910B0280FFA4
+:10776000CFC0A0910702B09108021097E9F0609194
+:10777000050170910601E7E0F1E09B01AD014E0FBC
+:107780005F1FF999FECF32BD21BD819180BDFA9A6C
+:10779000F99A2F5F3F4FE417F50799F76A0F7B1FA0
+:1077A00070930601609305018091C00085FFFCCFB6
+:1077B000F092C6008091C00085FFFCCFB092C60059
+:1077C000DACE81E00E94EA38D6CE8FE00E94EA3815
+:1077D000D2CE0E948638809308020E948638809319
+:1077E00007020E948638853409F484C080910B0218
+:1077F0008E7F80930B028091050190910601880F86
+:10780000991F90930601809305010E94863880326B
+:1078100009F0B1CE8091C00085FFFCCFF092C60088
+:10782000A0910702B09108021097B9F180910B0264
+:10783000182F1170082F0270E0910501F0910601D8
+:107840009F012F5F3F4FB90140E050E01123B1F499
+:10785000002339F494918091C00085FFFCCF909370
+:10786000C6004F5F5F4FCB010196F9014A175B07D6
+:1078700080F4BC012F5F3F4F112351F3F999FECFE4
+:10788000F2BDE1BDF89A90B58091C00085FFFCCFB4
+:10789000E6CF70930601609305018091C00085FDDD
+:1078A000E2CE8091C00085FFF8CFDDCE0E94863801
+:1078B000803209F060CE8091C00085FFFCCFF0924D
+:1078C000C6008091C00085FFFCCFE092C600809189
+:1078D000C00085FFFCCFD092C6008091C00085FF1C
+:1078E000FCCFC092C6008091C00085FFFCCFB09253
+:1078F000C60041CE80910B02816080930B0285CF40
+:10790000809106018823880F880B8A2180930A02C0
+:107910008091050190910601880F991F90930601AF
+:10792000809305018091070280FF09C080910702C2
+:107930009091080201969093080280930702F894B0
+:10794000F999FECF1127E0910501F0910601C7E0FA
+:10795000D1E08091070290910802103091F40091DB
+:10796000570001700130D9F303E000935700E89508
+:107970000091570001700130D9F301E100935700E5
+:10798000E895099019900091570001700130D9F3E2
+:1079900001E000935700E8951395103498F01127F3
+:1079A0000091570001700130D9F305E000935700B2
+:1079B000E8950091570001700130D9F301E100937F
+:1079C0005700E8953296029709F0C7CF103011F0B2
+:1079D0000296E5CF11248091C00085FFE5CEE8CE68
+:0479E000F894FFCF49
+:0279E400800021
+:040000030000700089
+:00000001FF
diff --git a/test/ardmake/hardware/bootloaders/bt/Makefile b/test/ardmake/hardware/bootloaders/bt/Makefile new file mode 100644 index 0000000..431f2e7 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/bt/Makefile @@ -0,0 +1,109 @@ +# Makefile for ATmegaBOOT +# E.Lins, 18.7.2005 +# $Id$ +# +# Instructions +# +# To make bootloader .hex file: +# make diecimila +# make lilypad +# make ng +# etc... +# +# To burn bootloader .hex file: +# make diecimila_isp +# make lilypad_isp +# make ng_isp +# etc... + +# program name should not be changed... +PROGRAM = ATmegaBOOT_168 + +# enter the parameters for the avrdude isp tool +ISPTOOL = stk500v2 +ISPPORT = usb +ISPSPEED = -b 115200 + +MCU_TARGET = atmega168 +LDSECTION = --section-start=.text=0x3800 + +# the efuse should really be 0xf8; since, however, only the lower +# three bits of that byte are used on the atmega168, avrdude gets +# confused if you specify 1's for the higher bits, see: +# http://tinker.it/now/2007/02/24/the-tale-of-avrdude-atmega168-and-extended-bits-fuses/ +# +# similarly, the lock bits should be 0xff instead of 0x3f (to +# unlock the bootloader section) and 0xcf instead of 0x0f (to +# lock it), but since the high two bits of the lock byte are +# unused, avrdude would get confused. + +ISPFUSES = avrdude -c $(ISPTOOL) -p $(MCU_TARGET) -P $(ISPPORT) $(ISPSPEED) \ +-e -u -U lock:w:0x3f:m -U efuse:w:0x$(EFUSE):m -U hfuse:w:0x$(HFUSE):m -U lfuse:w:0x$(LFUSE):m +ISPFLASH = avrdude -c $(ISPTOOL) -p $(MCU_TARGET) -P $(ISPPORT) $(ISPSPEED) \ +-U flash:w:$(PROGRAM)_$(TARGET).hex -U lock:w:0x0f:m + +STK500 = "C:\Program Files\Atmel\AVR Tools\STK500\Stk500.exe" +STK500-1 = $(STK500) -e -d$(MCU_TARGET) -pf -vf -if$(PROGRAM)_$(TARGET).hex \ +-lFF -LFF -f$(HFUSE)$(LFUSE) -EF8 -ms -q -cUSB -I200kHz -s -wt +STK500-2 = $(STK500) -d$(MCU_TARGET) -ms -q -lCF -LCF -cUSB -I200kHz -s -wt + + +OBJ = $(PROGRAM).o +OPTIMIZE = -O2 + +DEFS = +LIBS = + +CC = avr-gcc + +# Override is only needed by avr-lib build system. + +override CFLAGS = -g -Wall $(OPTIMIZE) -mmcu=$(MCU_TARGET) -DF_CPU=$(AVR_FREQ) $(DEFS) +override LDFLAGS = -Wl,$(LDSECTION) +#override LDFLAGS = -Wl,-Map,$(PROGRAM).map,$(LDSECTION) + +OBJCOPY = avr-objcopy +OBJDUMP = avr-objdump + +all: + +atmega328_bt: TARGET = atmega328_bt +atmega328_bt: MCU_TARGET = atmega328p +atmega328_bt: AVR_FREQ = 16000000L +atmega328_bt: LDSECTION = --section-start=.text=0x7000 +atmega328_bt: $(PROGRAM)_atmega328_bt.hex + +atmega328_bt_isp: atmega328_bt +atmega328_bt_isp: TARGET = atmega328_bt +atmega328_bt_isp: MCU_TARGET = atmega328p +atmega328_bt_isp: HFUSE = D8 +atmega328_bt_isp: LFUSE = FF +atmega328_bt_isp: EFUSE = 05 +atmega328_bt_isp: isp + +isp: $(TARGET) + $(ISPFUSES) + $(ISPFLASH) + +isp-stk500: $(PROGRAM)_$(TARGET).hex + $(STK500-1) + $(STK500-2) + +%.elf: $(OBJ) + $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $^ $(LIBS) + +clean: + rm -rf *.o *.elf *.lst *.map *.sym *.lss *.eep *.srec *.bin *.hex + +%.lst: %.elf + $(OBJDUMP) -h -S $< > $@ + +%.hex: %.elf + $(OBJCOPY) -j .text -j .data -O ihex $< $@ + +%.srec: %.elf + $(OBJCOPY) -j .text -j .data -O srec $< $@ + +%.bin: %.elf + $(OBJCOPY) -j .text -j .data -O binary $< $@ + diff --git a/test/ardmake/hardware/bootloaders/lilypad/LilyPadBOOT_168.hex b/test/ardmake/hardware/bootloaders/lilypad/LilyPadBOOT_168.hex new file mode 100644 index 0000000..aea378e --- /dev/null +++ b/test/ardmake/hardware/bootloaders/lilypad/LilyPadBOOT_168.hex @@ -0,0 +1,117 @@ +:103800000C94341C0C944F1C0C944F1C0C944F1CA7
+:103810000C944F1C0C944F1C0C944F1C0C944F1C7C
+:103820000C944F1C0C944F1C0C944F1C0C944F1C6C
+:103830000C944F1C0C944F1C0C944F1C0C944F1C5C
+:103840000C944F1C0C944F1C0C944F1C0C944F1C4C
+:103850000C944F1C0C944F1C0C944F1C0C944F1C3C
+:103860000C944F1C0C944F1C11241FBECFEFD4E0BE
+:10387000DEBFCDBF11E0A0E0B1E0E8E1FFE302C0B0
+:1038800005900D92A230B107D9F712E0A2E0B1E0A5
+:1038900001C01D92AD30B107E1F70C94311D0C94BD
+:1038A000001CCF93DF93CDB7DEB724970FB6F89403
+:1038B000DEBF0FBECDBF382F882309F433E010924E
+:1038C0000A02332309F44BC020E02D9A19821A8290
+:1038D0001B821C8289819A81AB81BC8180549F416B
+:1038E000A040B040A0F489819A81AB81BC8101964F
+:1038F000A11DB11D89839A83AB83BC8389819A8181
+:10390000AB81BC8180549F41A040B04060F32D98B2
+:1039100019821A821B821C8289819A81AB81BC81A7
+:1039200080549F41A040B040A0F489819A81AB812E
+:10393000BC810196A11DB11D89839A83AB83BC8391
+:1039400089819A81AB81BC8180549F41A040B04065
+:1039500060F32F5F231708F4B8CF20930A02249650
+:103960000FB6F894DEBF0FBECDBFDF91CF910895A3
+:10397000EF92FF920F931F93EE24FF248701809113
+:10398000C00087FD17C00894E11CF11C011D111D2A
+:1039900081E0E81689E0F8068DE3080780E0180763
+:1039A00070F3E0910201F091030109958091C0004C
+:1039B00087FFE9CF8091C600992787FD90951F91D9
+:1039C0000F91FF90EF900895982F8091C00085FF90
+:1039D000FCCF9093C60008950E94B81C803271F00D
+:1039E000809104018F5F80930401853009F0089570
+:1039F000E0910201F09103010995089584E10E948C
+:103A0000E41C80E10E94E41C08951F93182F0E947B
+:103A1000B81C803269F0809104018F5F80930401AB
+:103A2000853079F4E0910201F0910301099509C014
+:103A300084E10E94E41C812F0E94E41C80E10E942A
+:103A4000E41C1F910895282F882351F090E0809165
+:103A5000C00087FFFCCF8091C6009F5F2917B9F790
+:103A60000895CFEFD4E0DEBFCDBF000089E18093A1
+:103A7000C4001092C50088E18093C10086E0809365
+:103A8000C2005098589A259A83E00E94511C0E94C7
+:103A9000B81C8033B1F18133B9F1803409F454C0DA
+:103AA000813409F45AC0823409F469C0853409F4B8
+:103AB0006CC0803531F1813521F1823511F18535C8
+:103AC00009F4B2C0863509F4BAC0843609F463C07B
+:103AD000843709F4BBC0853709F40EC1863709F471
+:103AE0004AC0809104018F5F80930401853079F68C
+:103AF000E0910201F091030109950E94B81C803306
+:103B000051F60E94EC1CC3CF0E94B81C803249F7CA
+:103B100084E10E94E41C81E40E94E41C86E50E948A
+:103B2000E41C82E50E94E41C80E20E94E41C89E41B
+:103B30000E94E41C83E50E94E41C80E50E94E41CD2
+:103B400080E10E94E41CA3CF0E94B81C8638C8F212
+:103B50000E94B81C0E94EC1C9ACF0E94B81C8038AE
+:103B600009F4F7C0813809F4F8C0823809F4F9C0C3
+:103B7000883909F4BDC080E00E94051D88CF84E12A
+:103B80000E94231D0E94EC1C82CF85E00E94231D11
+:103B90000E94EC1C7CCF0E94B81C809309020E94FA
+:103BA000B81C8093080280910C028E7F80930C02D7
+:103BB0000E94B81C853409F4C6C080910802909117
+:103BC0000902892B09F0ADC00E94B81C803209F0AF
+:103BD00088CF80910C0280FFC8C08091080290912C
+:103BE00009020097D1F02091060130910701E8E029
+:103BF000F1E0AC014E0F5F1FF999FECF32BD21BD40
+:103C0000819180BDFA9AF99A2F5F3F4F4E175F0757
+:103C100099F7309307012093060184E10E94E41C88
+:103C200080E10E94E41C33CF0E94B81C80930601FF
+:103C30000E94B81C809307010E94EC1C28CF84E0EE
+:103C40000E94231D80E00E94051D21CF0E94B81C08
+:103C5000809309020E94B81C809308020E94B81C3D
+:103C6000853409F4F4C080910C028E7F80930C029D
+:103C70008091060190910701880F991F9093070189
+:103C8000809306010E94B81C803209F000CF84E1C5
+:103C90000E94E41C2091080230910902211531058F
+:103CA00019F1C0E0D0E0E0910601F09107018091A8
+:103CB0000C0280FFC4C0F999FECFF2BDE1BDF89AB5
+:103CC00080B50E94E41CE0910601F0910701319655
+:103CD000F0930701E0930601209108023091090258
+:103CE0002196C217D30718F380E10E94E41CCFCEBF
+:103CF00083E00E94051DCBCE0E94B81C803209F0E3
+:103D0000F0CE84E10E94E41C8EE10E94E41C84E970
+:103D10000E94E41C86E00E94E41C80E10E94E41CF6
+:103D2000B6CEC0E0D0E008E011E00E94B81CF80177
+:103D300081938F0121968091080290910902C81702
+:103D4000D90798F341CF80910C02816080930C02D7
+:103D500034CF82E00E94051D9ACE81E00E94051DAD
+:103D600096CE80E10E94051D92CE8091070187FDCD
+:103D700080C010920B028091060190910701880F7C
+:103D8000991F90930701809306018091080280FF9C
+:103D900009C080910802909109020196909309024E
+:103DA00080930802F894F999FECF1127E09106015B
+:103DB000F0910701C8E0D1E08091080290910902DA
+:103DC000103091F40091570001700130D9F303E0F5
+:103DD00000935700E8950091570001700130D9F326
+:103DE00001E100935700E895099019900091570060
+:103DF00001700130D9F301E000935700E895139565
+:103E0000103498F011270091570001700130D9F358
+:103E100005E000935700E8950091570001700130CC
+:103E2000D9F301E100935700E8953296029709F023
+:103E3000C7CF103011F00296E5CF1124EECE81FFEE
+:103E40000CC03196F0930701E093060149CF8091B1
+:103E50000C02816080930C0215CF84910E94E41CB7
+:103E60002091080230910902E0910601F0910701CA
+:103E7000E8CF81E080930B027ECF0F931F930E94C7
+:103E8000B81C182F0E94E41C0E94B81C082F0E9426
+:103E9000E41C11362CF0175501363CF0075508C0CC
+:103EA0001033D4F310530136CCF700330CF0005329
+:103EB0001295107F100F812F992787FD90951F91E4
+:103EC0000F9108951F93282F992787FD9095807F44
+:103ED00090709595879595958795959587959595E6
+:103EE00087958A304CF0982F995A822F8F708A309C
+:103EF0004CF0182F195A08C0982F905D822F8F70A0
+:103F00008A30BCF7182F105D892F0E94E41C812F86
+:083F10000E94E41C1F910895BA
+:023F1800800027
+:0400000300003800C1
+:00000001FF
diff --git a/test/ardmake/hardware/bootloaders/lilypad/src/ATmegaBOOT.c b/test/ardmake/hardware/bootloaders/lilypad/src/ATmegaBOOT.c new file mode 100644 index 0000000..915bc57 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/lilypad/src/ATmegaBOOT.c @@ -0,0 +1,979 @@ +/**********************************************************/ +/* Serial Bootloader for Atmel megaAVR Controllers */ +/* */ +/* tested with ATmega8, ATmega128 and ATmega168 */ +/* should work with other mega's, see code for details */ +/* */ +/* ATmegaBOOT.c */ +/* */ +/* 20070626: hacked for Arduino Diecimila (which auto- */ +/* resets when a USB connection is made to it) */ +/* by D. Mellis */ +/* 20060802: hacked for Arduino by D. Cuartielles */ +/* based on a previous hack by D. Mellis */ +/* and D. Cuartielles */ +/* */ +/* Monitor and debug functions were added to the original */ +/* code by Dr. Erik Lins, chip45.com. (See below) */ +/* */ +/* Thanks to Karl Pitrich for fixing a bootloader pin */ +/* problem and more informative LED blinking! */ +/* */ +/* For the latest version see: */ +/* http://www.chip45.com/ */ +/* */ +/* ------------------------------------------------------ */ +/* */ +/* based on stk500boot.c */ +/* Copyright (c) 2003, Jason P. Kyle */ +/* All rights reserved. */ +/* see avr1.org for original file and information */ +/* */ +/* This program is free software; you can redistribute it */ +/* and/or modify it under the terms of the GNU General */ +/* Public License as published by the Free Software */ +/* Foundation; either version 2 of the License, or */ +/* (at your option) any later version. */ +/* */ +/* This program is distributed in the hope that it will */ +/* be useful, but WITHOUT ANY WARRANTY; without even the */ +/* implied warranty of MERCHANTABILITY or FITNESS FOR A */ +/* PARTICULAR PURPOSE. See the GNU General Public */ +/* License for more details. */ +/* */ +/* You should have received a copy of the GNU General */ +/* Public License along with this program; if not, write */ +/* to the Free Software Foundation, Inc., */ +/* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +/* */ +/* Licence can be viewed at */ +/* http://www.fsf.org/licenses/gpl.txt */ +/* */ +/* Target = Atmel AVR m128,m64,m32,m16,m8,m162,m163,m169, */ +/* m8515,m8535. ATmega161 has a very small boot block so */ +/* isn't supported. */ +/* */ +/* Tested with m168 */ +/**********************************************************/ + +/* $Id$ */ + + +/* some includes */ +#include <inttypes.h> +#include <avr/io.h> +#include <avr/pgmspace.h> +#include <avr/interrupt.h> +#include <avr/wdt.h> + + +/* the current avr-libc eeprom functions do not support the ATmega168 */ +/* own eeprom write/read functions are used instead */ +#ifndef __AVR_ATmega168__ +#include <avr/eeprom.h> +#endif + +/* Use the F_CPU defined in Makefile */ + +/* 20060803: hacked by DojoCorp */ +/* 20070626: hacked by David A. Mellis to decrease waiting time for auto-reset */ +/* set the waiting time for the bootloader */ +/* get this from the Makefile instead */ +/* #define MAX_TIME_COUNT (F_CPU>>4) */ + +/* 20070707: hacked by David A. Mellis - after this many errors give up and launch application */ +#define MAX_ERROR_COUNT 5 + +/* set the UART baud rate */ +/* 20060803: hacked by DojoCorp */ +//#define BAUD_RATE 115200 +#define BAUD_RATE 19200 + + +/* SW_MAJOR and MINOR needs to be updated from time to time to avoid warning message from AVR Studio */ +/* never allow AVR Studio to do an update !!!! */ +#define HW_VER 0x02 +#define SW_MAJOR 0x01 +#define SW_MINOR 0x10 + + +/* Adjust to suit whatever pin your hardware uses to enter the bootloader */ +/* ATmega128 has two UARTS so two pins are used to enter bootloader and select UART */ +/* BL0... means UART0, BL1... means UART1 */ +#ifdef __AVR_ATmega128__ +#define BL_DDR DDRF +#define BL_PORT PORTF +#define BL_PIN PINF +#define BL0 PINF7 +#define BL1 PINF6 +#else +/* other ATmegas have only one UART, so only one pin is defined to enter bootloader */ +#define BL_DDR DDRD +#define BL_PORT PORTD +#define BL_PIN PIND +#define BL PIND6 +#endif + + +/* onboard LED is used to indicate, that the bootloader was entered (3x flashing) */ +/* if monitor functions are included, LED goes on after monitor was entered */ +#ifdef __AVR_ATmega128__ +/* Onboard LED is connected to pin PB7 (e.g. Crumb128, PROBOmega128, Savvy128) */ +#define LED_DDR DDRB +#define LED_PORT PORTB +#define LED_PIN PINB +#define LED PINB7 +#else +/* Onboard LED is connected to pin PB2 (e.g. Crumb8, Crumb168) */ +#define LED_DDR DDRB +#define LED_PORT PORTB +#define LED_PIN PINB +/* 20060803: hacked by DojoCorp, LED pin is B5 in Arduino */ +/* #define LED PINB2 */ +#define LED PINB5 +#endif + + +/* monitor functions will only be compiled when using ATmega128, due to bootblock size constraints */ +#ifdef __AVR_ATmega128__ +#define MONITOR +#endif + + +/* define various device id's */ +/* manufacturer byte is always the same */ +#define SIG1 0x1E // Yep, Atmel is the only manufacturer of AVR micros. Single source :( + +#if defined __AVR_ATmega128__ +#define SIG2 0x97 +#define SIG3 0x02 +#define PAGE_SIZE 0x80U //128 words + +#elif defined __AVR_ATmega64__ +#define SIG2 0x96 +#define SIG3 0x02 +#define PAGE_SIZE 0x80U //128 words + +#elif defined __AVR_ATmega32__ +#define SIG2 0x95 +#define SIG3 0x02 +#define PAGE_SIZE 0x40U //64 words + +#elif defined __AVR_ATmega16__ +#define SIG2 0x94 +#define SIG3 0x03 +#define PAGE_SIZE 0x40U //64 words + +#elif defined __AVR_ATmega8__ +#define SIG2 0x93 +#define SIG3 0x07 +#define PAGE_SIZE 0x20U //32 words + +#elif defined __AVR_ATmega88__ +#define SIG2 0x93 +#define SIG3 0x0a +#define PAGE_SIZE 0x20U //32 words + +#elif defined __AVR_ATmega168__ +#define SIG2 0x94 +#define SIG3 0x06 +#define PAGE_SIZE 0x40U //64 words + +#elif defined __AVR_ATmega162__ +#define SIG2 0x94 +#define SIG3 0x04 +#define PAGE_SIZE 0x40U //64 words + +#elif defined __AVR_ATmega163__ +#define SIG2 0x94 +#define SIG3 0x02 +#define PAGE_SIZE 0x40U //64 words + +#elif defined __AVR_ATmega169__ +#define SIG2 0x94 +#define SIG3 0x05 +#define PAGE_SIZE 0x40U //64 words + +#elif defined __AVR_ATmega8515__ +#define SIG2 0x93 +#define SIG3 0x06 +#define PAGE_SIZE 0x20U //32 words + +#elif defined __AVR_ATmega8535__ +#define SIG2 0x93 +#define SIG3 0x08 +#define PAGE_SIZE 0x20U //32 words +#endif + + +/* function prototypes */ +void putch(char); +char getch(void); +void getNch(uint8_t); +void byte_response(uint8_t); +void nothing_response(void); +char gethex(void); +void puthex(char); +void flash_led(uint8_t); + +/* some variables */ +union address_union { + uint16_t word; + uint8_t byte[2]; +} address; + +union length_union { + uint16_t word; + uint8_t byte[2]; +} length; + +struct flags_struct { + unsigned eeprom : 1; + unsigned rampz : 1; +} flags; + +uint8_t buff[256]; +uint8_t address_high; + +uint8_t pagesz=0x80; + +uint8_t i; +uint8_t bootuart = 0; + +uint8_t error_count = 0; + +void (*app_start)(void) = 0x0000; + + +/* main program starts here */ +int main(void) +{ + uint8_t ch,ch2; + uint16_t w; + + asm volatile("nop\n\t"); + + /* set pin direction for bootloader pin and enable pullup */ + /* for ATmega128, two pins need to be initialized */ +#ifdef __AVR_ATmega128__ + BL_DDR &= ~_BV(BL0); + BL_DDR &= ~_BV(BL1); + BL_PORT |= _BV(BL0); + BL_PORT |= _BV(BL1); +#else + /* We run the bootloader regardless of the state of this pin. Thus, don't + put it in a different state than the other pins. --DAM, 070709 + BL_DDR &= ~_BV(BL); + BL_PORT |= _BV(BL); + */ +#endif + + +#ifdef __AVR_ATmega128__ + /* check which UART should be used for booting */ + if(bit_is_clear(BL_PIN, BL0)) { + bootuart = 1; + } + else if(bit_is_clear(BL_PIN, BL1)) { + bootuart = 2; + } +#endif + + /* check if flash is programmed already, if not start bootloader anyway */ + if(pgm_read_byte_near(0x0000) != 0xFF) { + +#ifdef __AVR_ATmega128__ + /* no UART was selected, start application */ + if(!bootuart) { + app_start(); + } +#else + /* check if bootloader pin is set low */ + /* we don't start this part neither for the m8, nor m168 */ + //if(bit_is_set(BL_PIN, BL)) { + // app_start(); + // } +#endif + } + +#ifdef __AVR_ATmega128__ + /* no bootuart was selected, default to uart 0 */ + if(!bootuart) { + bootuart = 1; + } +#endif + + + /* initialize UART(s) depending on CPU defined */ +#ifdef __AVR_ATmega128__ + if(bootuart == 1) { + UBRR0L = (uint8_t)(F_CPU/(BAUD_RATE*16L)-1); + UBRR0H = (F_CPU/(BAUD_RATE*16L)-1) >> 8; + UCSR0A = 0x00; + UCSR0C = 0x06; + UCSR0B = _BV(TXEN0)|_BV(RXEN0); + } + if(bootuart == 2) { + UBRR1L = (uint8_t)(F_CPU/(BAUD_RATE*16L)-1); + UBRR1H = (F_CPU/(BAUD_RATE*16L)-1) >> 8; + UCSR1A = 0x00; + UCSR1C = 0x06; + UCSR1B = _BV(TXEN1)|_BV(RXEN1); + } +#elif defined __AVR_ATmega163__ + UBRR = (uint8_t)(F_CPU/(BAUD_RATE*16L)-1); + UBRRHI = (F_CPU/(BAUD_RATE*16L)-1) >> 8; + UCSRA = 0x00; + UCSRB = _BV(TXEN)|_BV(RXEN); +#elif defined __AVR_ATmega168__ + UBRR0L = (uint8_t)(F_CPU/(BAUD_RATE*16L)-1); + UBRR0H = (F_CPU/(BAUD_RATE*16L)-1) >> 8; + UCSR0B = (1<<RXEN0) | (1<<TXEN0); + UCSR0C = (1<<UCSZ00) | (1<<UCSZ01); + + /* Enable internal pull-up resistor on pin D0 (RX), in order + to supress line noise that prevents the bootloader from + timing out (DAM: 20070509) */ + DDRD &= ~_BV(PIND0); + PORTD |= _BV(PIND0); +#elif defined __AVR_ATmega8__ + /* m8 */ + UBRRH = (((F_CPU/BAUD_RATE)/16)-1)>>8; // set baud rate + UBRRL = (((F_CPU/BAUD_RATE)/16)-1); + UCSRB = (1<<RXEN)|(1<<TXEN); // enable Rx & Tx + UCSRC = (1<<URSEL)|(1<<UCSZ1)|(1<<UCSZ0); // config USART; 8N1 +#else + /* m16,m32,m169,m8515,m8535 */ + UBRRL = (uint8_t)(F_CPU/(BAUD_RATE*16L)-1); + UBRRH = (F_CPU/(BAUD_RATE*16L)-1) >> 8; + UCSRA = 0x00; + UCSRC = 0x06; + UCSRB = _BV(TXEN)|_BV(RXEN); +#endif + + /* set LED pin as output */ + LED_DDR |= _BV(LED); + + + /* flash onboard LED to signal entering of bootloader */ +#ifdef __AVR_ATmega128__ + // 4x for UART0, 5x for UART1 + flash_led(NUM_LED_FLASHES + bootuart); +#else + flash_led(NUM_LED_FLASHES); +#endif + + /* 20050803: by DojoCorp, this is one of the parts provoking the + system to stop listening, cancelled from the original */ + //putch('\0'); + + + /* forever loop */ + for (;;) { + + /* get character from UART */ + ch = getch(); + + /* A bunch of if...else if... gives smaller code than switch...case ! */ + + /* Hello is anyone home ? */ + if(ch=='0') { + nothing_response(); + } + + + /* Request programmer ID */ + /* Not using PROGMEM string due to boot block in m128 being beyond 64kB boundry */ + /* Would need to selectively manipulate RAMPZ, and it's only 9 characters anyway so who cares. */ + else if(ch=='1') { + if (getch() == ' ') { + putch(0x14); + putch('A'); + putch('V'); + putch('R'); + putch(' '); + putch('I'); + putch('S'); + putch('P'); + putch(0x10); + } else { + if (++error_count == MAX_ERROR_COUNT) + app_start(); + } + } + + + /* AVR ISP/STK500 board commands DON'T CARE so default nothing_response */ + else if(ch=='@') { + ch2 = getch(); + if (ch2>0x85) getch(); + nothing_response(); + } + + + /* AVR ISP/STK500 board requests */ + else if(ch=='A') { + ch2 = getch(); + if(ch2==0x80) byte_response(HW_VER); // Hardware version + else if(ch2==0x81) byte_response(SW_MAJOR); // Software major version + else if(ch2==0x82) byte_response(SW_MINOR); // Software minor version + else if(ch2==0x98) byte_response(0x03); // Unknown but seems to be required by avr studio 3.56 + else byte_response(0x00); // Covers various unnecessary responses we don't care about + } + + + /* Device Parameters DON'T CARE, DEVICE IS FIXED */ + else if(ch=='B') { + getNch(20); + nothing_response(); + } + + + /* Parallel programming stuff DON'T CARE */ + else if(ch=='E') { + getNch(5); + nothing_response(); + } + + + /* Enter programming mode */ + else if(ch=='P') { + nothing_response(); + } + + + /* Leave programming mode */ + else if(ch=='Q') { + nothing_response(); + } + + + /* Erase device, don't care as we will erase one page at a time anyway. */ + else if(ch=='R') { + nothing_response(); + } + + + /* Set address, little endian. EEPROM in bytes, FLASH in words */ + /* Perhaps extra address bytes may be added in future to support > 128kB FLASH. */ + /* This might explain why little endian was used here, big endian used everywhere else. */ + else if(ch=='U') { + address.byte[0] = getch(); + address.byte[1] = getch(); + nothing_response(); + } + + + /* Universal SPI programming command, disabled. Would be used for fuses and lock bits. */ + else if(ch=='V') { + getNch(4); + byte_response(0x00); + } + + + /* Write memory, length is big endian and is in bytes */ + else if(ch=='d') { + length.byte[1] = getch(); + length.byte[0] = getch(); + flags.eeprom = 0; + if (getch() == 'E') flags.eeprom = 1; + for (w=0;w<length.word;w++) { + buff[w] = getch(); // Store data in buffer, can't keep up with serial data stream whilst programming pages + } + if (getch() == ' ') { + if (flags.eeprom) { //Write to EEPROM one byte at a time + for(w=0;w<length.word;w++) { +#ifdef __AVR_ATmega168__ + while(EECR & (1<<EEPE)); + EEAR = (uint16_t)(void *)address.word; + EEDR = buff[w]; + EECR |= (1<<EEMPE); + EECR |= (1<<EEPE); +#else + eeprom_write_byte((void *)address.word,buff[w]); +#endif + address.word++; + } + } + else { //Write to FLASH one page at a time + if (address.byte[1]>127) address_high = 0x01; //Only possible with m128, m256 will need 3rd address byte. FIXME + else address_high = 0x00; +#ifdef __AVR_ATmega128__ + RAMPZ = address_high; +#endif + address.word = address.word << 1; //address * 2 -> byte location + /* if ((length.byte[0] & 0x01) == 0x01) length.word++; //Even up an odd number of bytes */ + if ((length.byte[0] & 0x01)) length.word++; //Even up an odd number of bytes + cli(); //Disable interrupts, just to be sure + // HACKME: EEPE used to be EEWE + while(bit_is_set(EECR,EEPE)); //Wait for previous EEPROM writes to complete + asm volatile( + "clr r17 \n\t" //page_word_count + "lds r30,address \n\t" //Address of FLASH location (in bytes) + "lds r31,address+1 \n\t" + "ldi r28,lo8(buff) \n\t" //Start of buffer array in RAM + "ldi r29,hi8(buff) \n\t" + "lds r24,length \n\t" //Length of data to be written (in bytes) + "lds r25,length+1 \n\t" + "length_loop: \n\t" //Main loop, repeat for number of words in block + "cpi r17,0x00 \n\t" //If page_word_count=0 then erase page + "brne no_page_erase \n\t" + "wait_spm1: \n\t" + "lds r16,%0 \n\t" //Wait for previous spm to complete + "andi r16,1 \n\t" + "cpi r16,1 \n\t" + "breq wait_spm1 \n\t" + "ldi r16,0x03 \n\t" //Erase page pointed to by Z + "sts %0,r16 \n\t" + "spm \n\t" +#ifdef __AVR_ATmega163__ + ".word 0xFFFF \n\t" + "nop \n\t" +#endif + "wait_spm2: \n\t" + "lds r16,%0 \n\t" //Wait for previous spm to complete + "andi r16,1 \n\t" + "cpi r16,1 \n\t" + "breq wait_spm2 \n\t" + + "ldi r16,0x11 \n\t" //Re-enable RWW section + "sts %0,r16 \n\t" + "spm \n\t" +#ifdef __AVR_ATmega163__ + ".word 0xFFFF \n\t" + "nop \n\t" +#endif + "no_page_erase: \n\t" + "ld r0,Y+ \n\t" //Write 2 bytes into page buffer + "ld r1,Y+ \n\t" + + "wait_spm3: \n\t" + "lds r16,%0 \n\t" //Wait for previous spm to complete + "andi r16,1 \n\t" + "cpi r16,1 \n\t" + "breq wait_spm3 \n\t" + "ldi r16,0x01 \n\t" //Load r0,r1 into FLASH page buffer + "sts %0,r16 \n\t" + "spm \n\t" + + "inc r17 \n\t" //page_word_count++ + "cpi r17,%1 \n\t" + "brlo same_page \n\t" //Still same page in FLASH + "write_page: \n\t" + "clr r17 \n\t" //New page, write current one first + "wait_spm4: \n\t" + "lds r16,%0 \n\t" //Wait for previous spm to complete + "andi r16,1 \n\t" + "cpi r16,1 \n\t" + "breq wait_spm4 \n\t" +#ifdef __AVR_ATmega163__ + "andi r30,0x80 \n\t" // m163 requires Z6:Z1 to be zero during page write +#endif + "ldi r16,0x05 \n\t" //Write page pointed to by Z + "sts %0,r16 \n\t" + "spm \n\t" +#ifdef __AVR_ATmega163__ + ".word 0xFFFF \n\t" + "nop \n\t" + "ori r30,0x7E \n\t" // recover Z6:Z1 state after page write (had to be zero during write) +#endif + "wait_spm5: \n\t" + "lds r16,%0 \n\t" //Wait for previous spm to complete + "andi r16,1 \n\t" + "cpi r16,1 \n\t" + "breq wait_spm5 \n\t" + "ldi r16,0x11 \n\t" //Re-enable RWW section + "sts %0,r16 \n\t" + "spm \n\t" +#ifdef __AVR_ATmega163__ + ".word 0xFFFF \n\t" + "nop \n\t" +#endif + "same_page: \n\t" + "adiw r30,2 \n\t" //Next word in FLASH + "sbiw r24,2 \n\t" //length-2 + "breq final_write \n\t" //Finished + "rjmp length_loop \n\t" + "final_write: \n\t" + "cpi r17,0 \n\t" + "breq block_done \n\t" + "adiw r24,2 \n\t" //length+2, fool above check on length after short page write + "rjmp write_page \n\t" + "block_done: \n\t" + "clr __zero_reg__ \n\t" //restore zero register +#if defined __AVR_ATmega168__ + : "=m" (SPMCSR) : "M" (PAGE_SIZE) : "r0","r16","r17","r24","r25","r28","r29","r30","r31" +#else + : "=m" (SPMCR) : "M" (PAGE_SIZE) : "r0","r16","r17","r24","r25","r28","r29","r30","r31" +#endif + ); + /* Should really add a wait for RWW section to be enabled, don't actually need it since we never */ + /* exit the bootloader without a power cycle anyhow */ + } + putch(0x14); + putch(0x10); + } else { + if (++error_count == MAX_ERROR_COUNT) + app_start(); + } + } + + + /* Read memory block mode, length is big endian. */ + else if(ch=='t') { + length.byte[1] = getch(); + length.byte[0] = getch(); +#if defined __AVR_ATmega128__ + if (address.word>0x7FFF) flags.rampz = 1; // No go with m256, FIXME + else flags.rampz = 0; +#endif + if (getch() == 'E') flags.eeprom = 1; + else { + flags.eeprom = 0; + address.word = address.word << 1; // address * 2 -> byte location + } + if (getch() == ' ') { // Command terminator + putch(0x14); + for (w=0;w < length.word;w++) { // Can handle odd and even lengths okay + if (flags.eeprom) { // Byte access EEPROM read +#ifdef __AVR_ATmega168__ + while(EECR & (1<<EEPE)); + EEAR = (uint16_t)(void *)address.word; + EECR |= (1<<EERE); + putch(EEDR); +#else + putch(eeprom_read_byte((void *)address.word)); +#endif + address.word++; + } + else { + + if (!flags.rampz) putch(pgm_read_byte_near(address.word)); +#if defined __AVR_ATmega128__ + else putch(pgm_read_byte_far(address.word + 0x10000)); + // Hmmmm, yuck FIXME when m256 arrvies +#endif + address.word++; + } + } + putch(0x10); + } + } + + + /* Get device signature bytes */ + else if(ch=='u') { + if (getch() == ' ') { + putch(0x14); + putch(SIG1); + putch(SIG2); + putch(SIG3); + putch(0x10); + } else { + if (++error_count == MAX_ERROR_COUNT) + app_start(); + } + } + + + /* Read oscillator calibration byte */ + else if(ch=='v') { + byte_response(0x00); + } + + +#ifdef MONITOR + + /* here come the extended monitor commands by Erik Lins */ + + /* check for three times exclamation mark pressed */ + else if(ch=='!') { + ch = getch(); + if(ch=='!') { + ch = getch(); + if(ch=='!') { + +#ifdef __AVR_ATmega128__ + uint16_t extaddr; +#endif + uint8_t addrl, addrh; + +#ifdef CRUMB128 + PGM_P welcome = {"ATmegaBOOT / Crumb128 - (C) J.P.Kyle, E.Lins - 050815\n\r"}; +#elif defined PROBOMEGA128 + PGM_P welcome = {"ATmegaBOOT / PROBOmega128 - (C) J.P.Kyle, E.Lins - 050815\n\r"}; +#elif defined SAVVY128 + PGM_P welcome = {"ATmegaBOOT / Savvy128 - (C) J.P.Kyle, E.Lins - 050815\n\r"}; +#endif + + /* turn on LED */ + LED_DDR |= _BV(LED); + LED_PORT &= ~_BV(LED); + + /* print a welcome message and command overview */ + for(i=0; welcome[i] != '\0'; ++i) { + putch(welcome[i]); + } + + /* test for valid commands */ + for(;;) { + putch('\n'); + putch('\r'); + putch(':'); + putch(' '); + + ch = getch(); + putch(ch); + + /* toggle LED */ + if(ch == 't') { + if(bit_is_set(LED_PIN,LED)) { + LED_PORT &= ~_BV(LED); + putch('1'); + } else { + LED_PORT |= _BV(LED); + putch('0'); + } + + } + + /* read byte from address */ + else if(ch == 'r') { + ch = getch(); putch(ch); + addrh = gethex(); + addrl = gethex(); + putch('='); + ch = *(uint8_t *)((addrh << 8) + addrl); + puthex(ch); + } + + /* write a byte to address */ + else if(ch == 'w') { + ch = getch(); putch(ch); + addrh = gethex(); + addrl = gethex(); + ch = getch(); putch(ch); + ch = gethex(); + *(uint8_t *)((addrh << 8) + addrl) = ch; + + } + + /* read from uart and echo back */ + else if(ch == 'u') { + for(;;) { + putch(getch()); + } + } +#ifdef __AVR_ATmega128__ + /* external bus loop */ + else if(ch == 'b') { + putch('b'); + putch('u'); + putch('s'); + MCUCR = 0x80; + XMCRA = 0; + XMCRB = 0; + extaddr = 0x1100; + for(;;) { + ch = *(volatile uint8_t *)extaddr; + if(++extaddr == 0) { + extaddr = 0x1100; + } + } + } +#endif + + else if(ch == 'j') { + app_start(); + } + + } + /* end of monitor functions */ + + } + } + } + /* end of monitor */ +#endif + else if (++error_count == MAX_ERROR_COUNT) { + app_start(); + } + } + /* end of forever loop */ + +} + + +char gethex(void) { + char ah,al; + + ah = getch(); putch(ah); + al = getch(); putch(al); + if(ah >= 'a') { + ah = ah - 'a' + 0x0a; + } else if(ah >= '0') { + ah -= '0'; + } + if(al >= 'a') { + al = al - 'a' + 0x0a; + } else if(al >= '0') { + al -= '0'; + } + return (ah << 4) + al; +} + + +void puthex(char ch) { + char ah,al; + + ah = (ch & 0xf0) >> 4; + if(ah >= 0x0a) { + ah = ah - 0x0a + 'a'; + } else { + ah += '0'; + } + al = (ch & 0x0f); + if(al >= 0x0a) { + al = al - 0x0a + 'a'; + } else { + al += '0'; + } + putch(ah); + putch(al); +} + + +void putch(char ch) +{ +#ifdef __AVR_ATmega128__ + if(bootuart == 1) { + while (!(UCSR0A & _BV(UDRE0))); + UDR0 = ch; + } + else if (bootuart == 2) { + while (!(UCSR1A & _BV(UDRE1))); + UDR1 = ch; + } +#elif defined __AVR_ATmega168__ + while (!(UCSR0A & _BV(UDRE0))); + UDR0 = ch; +#else + /* m8,16,32,169,8515,8535,163 */ + while (!(UCSRA & _BV(UDRE))); + UDR = ch; +#endif +} + + +char getch(void) +{ +#ifdef __AVR_ATmega128__ + if(bootuart == 1) { + while(!(UCSR0A & _BV(RXC0))); + return UDR0; + } + else if(bootuart == 2) { + while(!(UCSR1A & _BV(RXC1))); + return UDR1; + } + return 0; +#elif defined __AVR_ATmega168__ + uint32_t count = 0; + while(!(UCSR0A & _BV(RXC0))){ + /* 20060803 DojoCorp:: Addon coming from the previous Bootloader*/ + /* HACKME:: here is a good place to count times*/ + count++; + if (count > MAX_TIME_COUNT) + app_start(); + } + return UDR0; +#else + /* m8,16,32,169,8515,8535,163 */ + uint32_t count = 0; + while(!(UCSRA & _BV(RXC))){ + /* 20060803 DojoCorp:: Addon coming from the previous Bootloader*/ + /* HACKME:: here is a good place to count times*/ + count++; + if (count > MAX_TIME_COUNT) + app_start(); + } + return UDR; +#endif +} + + +void getNch(uint8_t count) +{ + uint8_t i; + for(i=0;i<count;i++) { +#ifdef __AVR_ATmega128__ + if(bootuart == 1) { + while(!(UCSR0A & _BV(RXC0))); + UDR0; + } + else if(bootuart == 2) { + while(!(UCSR1A & _BV(RXC1))); + UDR1; + } +#elif defined __AVR_ATmega168__ + while(!(UCSR0A & _BV(RXC0))); + UDR0; +#else + /* m8,16,32,169,8515,8535,163 */ + /* 20060803 DojoCorp:: Addon coming from the previous Bootloader*/ + //while(!(UCSRA & _BV(RXC))); + //UDR; + uint8_t i; + for(i=0;i<count;i++) { + getch(); // need to handle time out + } +#endif + } +} + + +void byte_response(uint8_t val) +{ + if (getch() == ' ') { + putch(0x14); + putch(val); + putch(0x10); + } else { + if (++error_count == MAX_ERROR_COUNT) + app_start(); + } +} + + +void nothing_response(void) +{ + if (getch() == ' ') { + putch(0x14); + putch(0x10); + } else { + if (++error_count == MAX_ERROR_COUNT) + app_start(); + } +} + +void flash_led(uint8_t count) +{ + /* flash onboard LED three times to signal entering of bootloader */ + /* l needs to be volatile or the delay loops below might get + optimized away if compiling with optimizations (DAM). */ + volatile uint32_t l; + + if (count == 0) { + count = 3; + } + + for (i = 0; i < count; ++i) { + LED_PORT |= _BV(LED); + for(l = 0; l < (F_CPU / 1000); ++l); + LED_PORT &= ~_BV(LED); + for(l = 0; l < (F_CPU / 1000); ++l); + } +} + + +/* end of file ATmegaBOOT.c */ diff --git a/test/ardmake/hardware/bootloaders/lilypad/src/Makefile b/test/ardmake/hardware/bootloaders/lilypad/src/Makefile new file mode 100644 index 0000000..516d5b2 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/lilypad/src/Makefile @@ -0,0 +1,84 @@ +# Makefile for ATmegaBOOT +# E.Lins, 18.7.2005 +# $Id$ + +# Instructions +# +# To build the bootloader for the LilyPad: +# make lily + + +# program name should not be changed... +PROGRAM = ATmegaBOOT_168 + +# enter the target CPU frequency +AVR_FREQ = 8000000L + +# enter the parameters for the avrdude isp tool +ISPTOOL = stk500v2 +ISPPORT = usb +ISPSPEED = -b 115200 + +MCU_TARGET = atmega168 +LDSECTION = --section-start=.text=0x3800 + +# the efuse should really be 0xf8; since, however, only the lower +# three bits of that byte are used on the atmega168, avrdude gets +# confused if you specify 1's for the higher bits, see: +# http://tinker.it/now/2007/02/24/the-tale-of-avrdude-atmega168-and-extended-bits-fuses/ +# +# similarly, the lock bits should be 0xff instead of 0x3f (to +# unlock the bootloader section) and 0xcf instead of 0x0f (to +# lock it), but since the high two bits of the lock byte are +# unused, avrdude would get confused. +ISPFUSES = avrdude -c $(ISPTOOL) -p m168 -P $(ISPPORT) $(ISPSPEED) -e -u -U lock:w:0x3f:m -U efuse:w:0x00:m -U hfuse:w:0xdd:m -U lfuse:w:0xff:m +ISPFLASH = avrdude -c $(ISPTOOL) -p m168 -P $(ISPPORT) $(ISPSPEED) -U flash:w:$(PROGRAM)_$(TARGET).hex -U lock:w:0x0f:m + + +OBJ = $(PROGRAM).o +OPTIMIZE = -O2 + +DEFS = +LIBS = + +CC = avr-gcc + + +# Override is only needed by avr-lib build system. + +override CFLAGS = -g -Wall $(OPTIMIZE) -mmcu=$(MCU_TARGET) -DF_CPU=$(AVR_FREQ) $(DEFS) +override LDFLAGS = -Wl,$(LDSECTION) +#override LDFLAGS = -Wl,-Map,$(PROGRAM).map,$(LDSECTION) + +OBJCOPY = avr-objcopy +OBJDUMP = avr-objdump + +all: + +lily: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>1' '-DNUM_LED_FLASHES=3' +lily: $(PROGRAM).hex + +$(PROGRAM).hex: $(PROGRAM).elf + $(OBJCOPY) -j .text -j .data -O ihex $< $@ + +$(PROGRAM).elf: $(OBJ) + $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $^ $(LIBS) + +$(OBJ): + avr-gcc $(CFLAGS) $(LDFLAGS) -c -g -O2 -Wall -mmcu=atmega168 ATmegaBOOT.c -o ATmegaBOOT_168.o + +%.lst: %.elf + $(OBJDUMP) -h -S $< > $@ + +%.srec: %.elf + $(OBJCOPY) -j .text -j .data -O srec $< $@ + +%.bin: %.elf + $(OBJCOPY) -j .text -j .data -O binary $< $@ + +clean: + rm -rf *.o *.elf *.lst *.map *.sym *.lss *.eep *.srec *.bin *.hex + +install: + avrdude -p m168 -c stk500v2 -P /dev/cu.USA19H1b1P1.1 -e -u -U lock:w:0x3f:m -U efuse:w:0x00:m -U hfuse:w:0xdd:m -U lfuse:w:0xe2:m + avrdude -p m168 -c stk500v2 -P /dev/cu.USA19H1b1P1.1 -e -u -U flash:w:ATmegaBOOT_168.hex -U lock:w:0x0f:m diff --git a/test/ardmake/hardware/bootloaders/optiboot/Makefile b/test/ardmake/hardware/bootloaders/optiboot/Makefile new file mode 100644 index 0000000..0fd6005 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/optiboot/Makefile @@ -0,0 +1,239 @@ +# Makefile for ATmegaBOOT +# E.Lins, 18.7.2005 +# $Id$ +# +# Instructions +# +# To make bootloader .hex file: +# make diecimila +# make lilypad +# make ng +# etc... +# +# To burn bootloader .hex file: +# make diecimila_isp +# make lilypad_isp +# make ng_isp +# etc... + +# program name should not be changed... +PROGRAM = optiboot + +# enter the parameters for the avrdude isp tool +ISPTOOL = stk500v2 +ISPPORT = usb +ISPSPEED = -b 115200 + +MCU_TARGET = atmega168 +LDSECTION = --section-start=.text=0x3e00 + +# the efuse should really be 0xf8; since, however, only the lower +# three bits of that byte are used on the atmega168, avrdude gets +# confused if you specify 1's for the higher bits, see: +# http://tinker.it/now/2007/02/24/the-tale-of-avrdude-atmega168-and-extended-bits-fuses/ +# +# similarly, the lock bits should be 0xff instead of 0x3f (to +# unlock the bootloader section) and 0xcf instead of 0x0f (to +# lock it), but since the high two bits of the lock byte are +# unused, avrdude would get confused. + +ISPFUSES = avrdude -c $(ISPTOOL) -p $(MCU_TARGET) -P $(ISPPORT) $(ISPSPEED) \ +-e -u -U lock:w:0x3f:m -U efuse:w:0x$(EFUSE):m -U hfuse:w:0x$(HFUSE):m -U lfuse:w:0x$(LFUSE):m +ISPFLASH = avrdude -c $(ISPTOOL) -p $(MCU_TARGET) -P $(ISPPORT) $(ISPSPEED) \ +-U flash:w:$(PROGRAM)_$(TARGET).hex -U lock:w:0x0f:m + +STK500 = "C:\Program Files\Atmel\AVR Tools\STK500\Stk500.exe" +STK500-1 = $(STK500) -e -d$(MCU_TARGET) -pf -vf -if$(PROGRAM)_$(TARGET).hex \ +-lFF -LFF -f$(HFUSE)$(LFUSE) -EF8 -ms -q -cUSB -I200kHz -s -wt +STK500-2 = $(STK500) -d$(MCU_TARGET) -ms -q -lCF -LCF -cUSB -I200kHz -s -wt + +OBJ = $(PROGRAM).o +OPTIMIZE = -Os -fno-inline-small-functions -fno-split-wide-types -mshort-calls + +DEFS = +LIBS = + +CC = avr-gcc + +# Override is only needed by avr-lib build system. + +override CFLAGS = -g -Wall $(OPTIMIZE) -mmcu=$(MCU_TARGET) -DF_CPU=$(AVR_FREQ) $(DEFS) +override LDFLAGS = -Wl,$(LDSECTION) -Wl,--relax -nostartfiles + +OBJCOPY = avr-objcopy +OBJDUMP = avr-objdump + +# 20MHz clocked platforms +# +# These are capable of 230400 baud, or 115200 baud on PC (Arduino Avrdude issue) +# + +pro20: TARGET = pro_20mhz +pro20: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' +pro20: AVR_FREQ = 20000000L +pro20: $(PROGRAM)_pro_20mhz.hex +pro20: $(PROGRAM)_pro_20mhz.lst + +pro20_isp: pro20 +pro20_isp: TARGET = pro_20mhz +pro20_isp: HFUSE = DD # 2.7V brownout +pro20_isp: LFUSE = C6 # Full swing xtal (20MHz) 258CK/14CK+4.1ms +pro20_isp: EFUSE = 02 # 512 byte boot +pro20_isp: isp + +# 16MHz clocked platforms +# +# These are capable of 230400 baud, or 115200 baud on PC (Arduino Avrdude issue) +# + +pro16: TARGET = pro_16MHz +pro16: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' +pro16: AVR_FREQ = 16000000L +pro16: $(PROGRAM)_pro_16MHz.hex +pro16: $(PROGRAM)_pro_16MHz.lst + +pro16_isp: pro16 +pro16_isp: TARGET = pro_16MHz +pro16_isp: HFUSE = DD # 2.7V brownout +pro16_isp: LFUSE = C6 # Full swing xtal (20MHz) 258CK/14CK+4.1ms +pro16_isp: EFUSE = 02 # 512 byte boot +pro16_isp: isp + +# Diecimila and NG use identical bootloaders +# +diecimila: TARGET = diecimila +diecimila: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' +diecimila: AVR_FREQ = 16000000L +diecimila: $(PROGRAM)_diecimila.hex +diecimila: $(PROGRAM)_diecimila.lst + +diecimila_isp: diecimila +diecimila_isp: TARGET = diecimila +diecimila_isp: HFUSE = DD # 2.7V brownout +diecimila_isp: LFUSE = FF # Low power xtal (16MHz) 16KCK/14CK+65ms +diecimila_isp: EFUSE = 02 # 512 byte boot +diecimila_isp: isp + +atmega328: TARGET = atmega328 +atmega328: MCU_TARGET = atmega328p +atmega328: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' +atmega328: AVR_FREQ = 16000000L +atmega328: LDSECTION = --section-start=.text=0x7e00 +atmega328: $(PROGRAM)_atmega328.hex +atmega328: $(PROGRAM)_atmega328.lst + +atmega328_isp: atmega328 +atmega328_isp: TARGET = atmega328 +atmega328_isp: MCU_TARGET = atmega328p +atmega328_isp: HFUSE = DE # 512 byte boot +atmega328_isp: LFUSE = FF # Low power xtal (16MHz) 16KCK/14CK+65ms +atmega328_isp: EFUSE = 05 # 2.7V brownout +atmega328_isp: isp + +# 8MHz clocked platforms +# +# These are capable of 115200 baud +# + +lilypad: TARGET = lilypad +lilypad: CFLAGS += '-DLED_START_FLASHES=3' '-DSOFT_UART' '-DBAUD_RATE=115200' +lilypad: AVR_FREQ = 8000000L +lilypad: $(PROGRAM)_lilypad.hex +lilypad: $(PROGRAM)_lilypad.lst + +lilypad_isp: lilypad +lilypad_isp: TARGET = lilypad +lilypad_isp: HFUSE = DD # 2.7V brownout +lilypad_isp: LFUSE = E2 # Internal 8MHz osc (8MHz) Slow rising power +lilypad_isp: EFUSE = 02 # 512 byte boot +lilypad_isp: isp + +lilypad_resonator: TARGET = lilypad_resonator +lilypad_resonator: CFLAGS += '-DLED_START_FLASHES=3' '-DSOFT_UART' '-DBAUD_RATE=115200' +lilypad_resonator: AVR_FREQ = 8000000L +lilypad_resonator: $(PROGRAM)_lilypad_resonator.hex +lilypad_resonator: $(PROGRAM)_lilypad_resonator.lst + +lilypad_resonator_isp: lilypad_resonator +lilypad_resonator_isp: TARGET = lilypad_resonator +lilypad_resonator_isp: HFUSE = DD # 2.7V brownout +lilypad_resonator_isp: LFUSE = C6 # Full swing xtal (20MHz) 258CK/14CK+4.1ms +lilypad_resonator_isp: EFUSE = 02 # 512 byte boot +lilypad_resonator_isp: isp + +pro8: TARGET = pro_8MHz +pro8: CFLAGS += '-DLED_START_FLASHES=3' '-DSOFT_UART' '-DBAUD_RATE=115200' +pro8: AVR_FREQ = 8000000L +pro8: $(PROGRAM)_pro_8MHz.hex +pro8: $(PROGRAM)_pro_8MHz.lst + +pro8_isp: pro8 +pro8_isp: TARGET = pro_8MHz +pro8_isp: HFUSE = DD # 2.7V brownout +pro8_isp: LFUSE = C6 # Full swing xtal (20MHz) 258CK/14CK+4.1ms +pro8_isp: EFUSE = 02 # 512 byte boot +pro8_isp: isp + +atmega328_pro8: TARGET = atmega328_pro_8MHz +atmega328_pro8: MCU_TARGET = atmega328p +atmega328_pro8: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' +atmega328_pro8: AVR_FREQ = 8000000L +atmega328_pro8: LDSECTION = --section-start=.text=0x7e00 +atmega328_pro8: $(PROGRAM)_atmega328_pro_8MHz.hex +atmega328_pro8: $(PROGRAM)_atmega328_pro_8MHz.lst + +atmega328_pro8_isp: atmega328_pro8 +atmega328_pro8_isp: TARGET = atmega328_pro_8MHz +atmega328_pro8_isp: MCU_TARGET = atmega328p +atmega328_pro8_isp: HFUSE = DE # 512 byte boot +atmega328_pro8_isp: LFUSE = FF # Low power xtal (16MHz) 16KCK/14CK+65ms +atmega328_pro8_isp: EFUSE = 05 # 2.7V brownout +atmega328_pro8_isp: isp + +# 1MHz clocked platforms +# +# These are capable of 9600 baud +# + +luminet: TARGET = luminet +luminet: MCU_TARGET = attiny84 +luminet: CFLAGS += '-DLED_START_FLASHES=3' '-DSOFT_UART' '-DBAUD_RATE=9600' +luminet: CFLAGS += '-DVIRTUAL_BOOT_PARTITION' +luminet: AVR_FREQ = 1000000L +luminet: LDSECTION = --section-start=.text=0x1d00 +luminet: $(PROGRAM)_luminet.hex +luminet: $(PROGRAM)_luminet.lst + +luminet_isp: luminet +luminet_isp: TARGET = luminet +luminet_isp: MCU_TARGET = attiny84 +luminet_isp: HFUSE = DF # Brownout disabled +luminet_isp: LFUSE = 62 # 1MHz internal oscillator, slowly rising power +luminet_isp: EFUSE = FE # Self-programming enable +luminet_isp: isp + +isp: $(TARGET) + $(ISPFUSES) + $(ISPFLASH) + +isp-stk500: $(PROGRAM)_$(TARGET).hex + $(STK500-1) + $(STK500-2) + +%.elf: $(OBJ) + $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $^ $(LIBS) + +clean: + rm -rf *.o *.elf *.lst *.map *.sym *.lss *.eep *.srec *.bin *.hex + +%.lst: %.elf + $(OBJDUMP) -h -S $< > $@ + +%.hex: %.elf + $(OBJCOPY) -j .text -j .data -O ihex $< $@ + +%.srec: %.elf + $(OBJCOPY) -j .text -j .data -O srec $< $@ + +%.bin: %.elf + $(OBJCOPY) -j .text -j .data -O binary $< $@ diff --git a/test/ardmake/hardware/bootloaders/optiboot/makeall b/test/ardmake/hardware/bootloaders/optiboot/makeall new file mode 100644 index 0000000..7a0b82d --- /dev/null +++ b/test/ardmake/hardware/bootloaders/optiboot/makeall @@ -0,0 +1,13 @@ +#!/bin/bash +make clean +make lilypad +make lilypad_resonator +make pro8 +make pro16 +make pro20 +make diecimila +make ng +make atmega328 +make atmega328_pro8 +make luminet + diff --git a/test/ardmake/hardware/bootloaders/optiboot/optiboot.c b/test/ardmake/hardware/bootloaders/optiboot/optiboot.c new file mode 100644 index 0000000..af92995 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/optiboot/optiboot.c @@ -0,0 +1,536 @@ +/**********************************************************/ +/* Optiboot bootloader for Arduino */ +/* */ +/* Heavily optimised bootloader that is faster and */ +/* smaller than the Arduino standard bootloader */ +/* */ +/* Enhancements: */ +/* Fits in 512 bytes, saving 1.5K of code space */ +/* Background page erasing speeds up programming */ +/* Higher baud rate speeds up programming */ +/* Written almost entirely in C */ +/* Customisable timeout with accurate timeconstant */ +/* */ +/* What you lose: */ +/* Implements a skeleton STK500 protocol which is */ +/* missing several features including EEPROM */ +/* programming and non-page-aligned writes */ +/* High baud rate breaks compatibility with standard */ +/* Arduino flash settings */ +/* */ +/* Currently supports: */ +/* ATmega168 based devices (Diecimila etc) */ +/* ATmega328P based devices (Duemilanove etc) */ +/* */ +/* Does not support: */ +/* ATmega1280 based devices (eg. Mega) */ +/* */ +/* Assumptions: */ +/* The code makes several assumptions that reduce the */ +/* code size. They are all true after a hardware reset, */ +/* but may not be true if the bootloader is called by */ +/* other means or on other hardware. */ +/* No interrupts can occur */ +/* UART and Timer 1 are set to their reset state */ +/* SP points to RAMEND */ +/* */ +/* Code builds on code, libraries and optimisations from: */ +/* stk500boot.c by Jason P. Kyle */ +/* Arduino bootloader http://arduino.cc */ +/* Spiff's 1K bootloader http://spiffie.org/know/arduino_1k_bootloader/bootloader.shtml */ +/* avr-libc project http://nongnu.org/avr-libc */ +/* Adaboot http://www.ladyada.net/library/arduino/bootloader.html */ +/* AVR305 Atmel Application Note */ +/* */ +/* This program is free software; you can redistribute it */ +/* and/or modify it under the terms of the GNU General */ +/* Public License as published by the Free Software */ +/* Foundation; either version 2 of the License, or */ +/* (at your option) any later version. */ +/* */ +/* This program is distributed in the hope that it will */ +/* be useful, but WITHOUT ANY WARRANTY; without even the */ +/* implied warranty of MERCHANTABILITY or FITNESS FOR A */ +/* PARTICULAR PURPOSE. See the GNU General Public */ +/* License for more details. */ +/* */ +/* You should have received a copy of the GNU General */ +/* Public License along with this program; if not, write */ +/* to the Free Software Foundation, Inc., */ +/* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +/* */ +/* Licence can be viewed at */ +/* http://www.fsf.org/licenses/gpl.txt */ +/* */ +/**********************************************************/ + +#include <inttypes.h> +#include <avr/io.h> +#include <avr/pgmspace.h> +#include <avr/boot.h> + +//#define LED_DATA_FLASH + +#ifndef LED_START_FLASHES +#define LED_START_FLASHES 0 +#endif + +/* Build-time variables */ +/* BAUD_RATE Programming baud rate */ +/* LED_NO_FLASHES Number of LED flashes on boot */ +/* FLASH_TIME_MS Duration of each LED flash */ +/* BOOT_TIMEOUT_MS Serial port wait time before exiting bootloader */ + +/* set the UART baud rate */ +#ifndef BAUD_RATE +#define BAUD_RATE 19200 +#endif + +#if defined(__AVR_ATmega168__) || defined(__AVR_ATmega328P__) +/* Onboard LED is connected to pin PB5 in Arduino NG, Diecimila, and Duemilanove */ +#define LED_DDR DDRB +#define LED_PORT PORTB +#define LED_PIN PINB +#define LED PINB5 + +/* Ports for soft UART */ +#ifdef SOFT_UART +#define UART_PORT PORTD +#define UART_PIN PIND +#define UART_DDR DDRD +#define UART_TX_BIT 1 +#define UART_RX_BIT 0 +#endif +#endif + +#if defined(__AVR_ATtiny84__) +/* Onboard LED is connected to pin PB5 in Arduino NG, Diecimila, and Duemilanove */ +#define LED_DDR DDRA +#define LED_PORT PORTA +#define LED_PIN PINA +#define LED PINA4 + +/* Ports for soft UART - left port only for now*/ +#ifdef SOFT_UART +#define UART_PORT PORTA +#define UART_PIN PINA +#define UART_DDR DDRA +#define UART_TX_BIT 2 +#define UART_RX_BIT 3 +#endif +#endif + +/* STK500 constants list, from AVRDUDE */ +#define STK_OK 0x10 +#define STK_FAILED 0x11 // Not used +#define STK_UNKNOWN 0x12 // Not used +#define STK_NODEVICE 0x13 // Not used +#define STK_INSYNC 0x14 // ' ' +#define STK_NOSYNC 0x15 // Not used +#define ADC_CHANNEL_ERROR 0x16 // Not used +#define ADC_MEASURE_OK 0x17 // Not used +#define PWM_CHANNEL_ERROR 0x18 // Not used +#define PWM_ADJUST_OK 0x19 // Not used +#define CRC_EOP 0x20 // 'SPACE' +#define STK_GET_SYNC 0x30 // '0' +#define STK_GET_SIGN_ON 0x31 // '1' +#define STK_SET_PARAMETER 0x40 // '@' +#define STK_GET_PARAMETER 0x41 // 'A' +#define STK_SET_DEVICE 0x42 // 'B' +#define STK_SET_DEVICE_EXT 0x45 // 'E' +#define STK_ENTER_PROGMODE 0x50 // 'P' +#define STK_LEAVE_PROGMODE 0x51 // 'Q' +#define STK_CHIP_ERASE 0x52 // 'R' +#define STK_CHECK_AUTOINC 0x53 // 'S' +#define STK_LOAD_ADDRESS 0x55 // 'U' +#define STK_UNIVERSAL 0x56 // 'V' +#define STK_PROG_FLASH 0x60 // '`' +#define STK_PROG_DATA 0x61 // 'a' +#define STK_PROG_FUSE 0x62 // 'b' +#define STK_PROG_LOCK 0x63 // 'c' +#define STK_PROG_PAGE 0x64 // 'd' +#define STK_PROG_FUSE_EXT 0x65 // 'e' +#define STK_READ_FLASH 0x70 // 'p' +#define STK_READ_DATA 0x71 // 'q' +#define STK_READ_FUSE 0x72 // 'r' +#define STK_READ_LOCK 0x73 // 's' +#define STK_READ_PAGE 0x74 // 't' +#define STK_READ_SIGN 0x75 // 'u' +#define STK_READ_OSCCAL 0x76 // 'v' +#define STK_READ_FUSE_EXT 0x77 // 'w' +#define STK_READ_OSCCAL_EXT 0x78 // 'x' + +/* Watchdog settings */ +#define WATCHDOG_OFF (0) +#define WATCHDOG_16MS (_BV(WDE)) +#define WATCHDOG_32MS (_BV(WDP0) | _BV(WDE)) +#define WATCHDOG_64MS (_BV(WDP1) | _BV(WDE)) +#define WATCHDOG_125MS (_BV(WDP1) | _BV(WDP0) | _BV(WDE)) +#define WATCHDOG_250MS (_BV(WDP2) | _BV(WDE)) +#define WATCHDOG_500MS (_BV(WDP2) | _BV(WDP0) | _BV(WDE)) +#define WATCHDOG_1S (_BV(WDP2) | _BV(WDP1) | _BV(WDE)) +#define WATCHDOG_2S (_BV(WDP2) | _BV(WDP1) | _BV(WDP0) | _BV(WDE)) +#define WATCHDOG_4S (_BV(WDE3) | _BV(WDE)) +#define WATCHDOG_8S (_BV(WDE3) | _BV(WDE0) | _BV(WDE)) + +/* Function Prototypes */ +/* The main function is in init9, which removes the interrupt vector table */ +/* we don't need. It is also 'naked', which means the compiler does not */ +/* generate any entry or exit code itself. */ +int main(void) __attribute__ ((naked)) __attribute__ ((section (".init9"))); +void putch(char); +uint8_t getch(void); +static inline void getNch(uint8_t); /* "static inline" is a compiler hint to reduce code size */ +void verifySpace(); +static inline void flash_led(uint8_t); +uint8_t getLen(); +static inline void watchdogReset(); +void watchdogConfig(uint8_t x); +#ifdef SOFT_UART +void uartDelay() __attribute__ ((naked)); +#endif +void appStart() __attribute__ ((naked)); + +/* C zero initialises all global variables. However, that requires */ +/* These definitions are NOT zero initialised, but that doesn't matter */ +/* This allows us to drop the zero init code, saving us memory */ +#define buff ((uint8_t*)(0x100)) +#define address (*(uint16_t*)(0x200)) +#define length (*(uint8_t*)(0x202)) +#ifdef VIRTUAL_BOOT_PARTITION +#define rstVect (*(uint16_t*)(0x204)) +#define wdtVect (*(uint16_t*)(0x206)) +#endif +/* main program starts here */ +int main(void) { + // After the zero init loop, this is the first code to run. + // + // This code makes the following assumptions: + // No interrupts will execute + // SP points to RAMEND + // r1 contains zero + // + // If not, uncomment the following instructions: + // cli(); + // SP=RAMEND; // This is done by hardware reset + // asm volatile ("clr __zero_reg__"); + + uint8_t ch; + +#if LED_START_FLASHES > 0 + // Set up Timer 1 for timeout counter + TCCR1B = _BV(CS12) | _BV(CS10); // div 1024 +#endif +#ifndef SOFT_UART + UCSR0A = _BV(U2X0); //Double speed mode USART0 + UCSR0B = _BV(RXEN0) | _BV(TXEN0); + UCSR0C = _BV(UCSZ00) | _BV(UCSZ01); + UBRR0L = (uint8_t)( (F_CPU + BAUD_RATE * 4L) / (BAUD_RATE * 8L) - 1 ); +#endif + + // Adaboot no-wait mod + ch = MCUSR; + MCUSR = 0; + if (!(ch & _BV(EXTRF))) appStart(); + + // Set up watchdog to trigger after 500ms + watchdogConfig(WATCHDOG_500MS); + + /* Set LED pin as output */ + LED_DDR |= _BV(LED); + +#ifdef SOFT_UART + /* Set TX pin as output */ + UART_DDR |= _BV(UART_TX_BIT); +#endif + +#if LED_START_FLASHES > 0 + /* Flash onboard LED to signal entering of bootloader */ + flash_led(LED_START_FLASHES * 2); +#endif + + /* Forever loop */ + for (;;) { + /* get character from UART */ + ch = getch(); + + if(ch == STK_GET_PARAMETER) { + // GET PARAMETER returns a generic 0x03 reply - enough to keep Avrdude happy + getNch(1); + putch(0x03); + } + else if(ch == STK_SET_DEVICE) { + // SET DEVICE is ignored + getNch(20); + } + else if(ch == STK_SET_DEVICE_EXT) { + // SET DEVICE EXT is ignored + getNch(5); + } + else if(ch == STK_LOAD_ADDRESS) { + // LOAD ADDRESS + address = getch(); + address = (address & 0xff) | (getch() << 8); + address += address; // Convert from word address to byte address + verifySpace(); + } + else if(ch == STK_UNIVERSAL) { + // UNIVERSAL command is ignored + getNch(4); + putch(0x00); + } + /* Write memory, length is big endian and is in bytes */ + else if(ch == STK_PROG_PAGE) { + // PROGRAM PAGE - we support flash programming only, not EEPROM + uint8_t *bufPtr; + uint16_t addrPtr; + + getLen(); + + // Immediately start page erase - this will 4.5ms + boot_page_erase((uint16_t)(void*)address); + + // While that is going on, read in page contents + bufPtr = buff; + do *bufPtr++ = getch(); + while (--length); + + // Read command terminator, start reply + verifySpace(); + + // If only a partial page is to be programmed, the erase might not be complete. + // So check that here + boot_spm_busy_wait(); + +#ifdef VIRTUAL_BOOT_PARTITION + if ((uint16_t)(void*)address == 0) { + // This is the reset vector page. We need to live-patch the code so the + // bootloader runs. + // + // Move RESET vector to WDT vector + uint16_t vect = buff[0] | (buff[1]<<8); + rstVect = vect; + wdtVect = buff[10] | (buff[11]<<8); + vect -= 4; // Instruction is a relative jump (rjmp), so recalculate. + buff[10] = vect & 0xff; + buff[11] = vect >> 8; + + // Add jump to bootloader at RESET vector + buff[0] = 0x7f; + buff[1] = 0xce; // rjmp 0x1d00 instruction + } +#endif + + // Copy buffer into programming buffer + bufPtr = buff; + addrPtr = (uint16_t)(void*)address; + ch = SPM_PAGESIZE / 2; + do { + uint16_t a; + a = *bufPtr++; + a |= (*bufPtr++) << 8; + boot_page_fill((uint16_t)(void*)addrPtr,a); + addrPtr += 2; + } while (--ch); + + // Write from programming buffer + boot_page_write((uint16_t)(void*)address); + boot_spm_busy_wait(); + +#if defined(RWWSRE) + // Reenable read access to flash + boot_rww_enable(); +#endif + + } + /* Read memory block mode, length is big endian. */ + else if(ch == STK_READ_PAGE) { + // READ PAGE - we only read flash + getLen(); + verifySpace(); +#ifdef VIRTUAL_BOOT_PARTITION + do { + // Undo vector patch in bottom page so verify passes + if (address == 0) ch=rstVect & 0xff; + else if (address == 1) ch=rstVect >> 8; + else if (address == 10) ch=wdtVect & 0xff; + else if (address == 11) ch=wdtVect >> 8; + else ch = pgm_read_byte_near(address); + address++; + putch(ch); + } while (--length); +#else + do putch(pgm_read_byte_near(address++)); + while (--length); +#endif + } + + /* Get device signature bytes */ + else if(ch == STK_READ_SIGN) { + // READ SIGN - return what Avrdude wants to hear + verifySpace(); + putch(SIGNATURE_0); + putch(SIGNATURE_1); + putch(SIGNATURE_2); + } + else if (ch == 'Q') { + // Adaboot no-wait mod + watchdogConfig(WATCHDOG_16MS); + verifySpace(); + } + else { + // This covers the response to commands like STK_ENTER_PROGMODE + verifySpace(); + } + putch(STK_OK); + } +} + +void putch(char ch) { +#ifndef SOFT_UART + while (!(UCSR0A & _BV(UDRE0))); + UDR0 = ch; +#else + __asm__ __volatile__ ( + " com %[ch]\n" // ones complement, carry set + " sec\n" + "1: brcc 2f\n" + " cbi %[uartPort],%[uartBit]\n" + " rjmp 3f\n" + "2: sbi %[uartPort],%[uartBit]\n" + " nop\n" + "3: rcall uartDelay\n" + " rcall uartDelay\n" + " lsr %[ch]\n" + " dec %[bitcnt]\n" + " brne 1b\n" + : + : + [bitcnt] "d" (10), + [ch] "r" (ch), + [uartPort] "I" (_SFR_IO_ADDR(UART_PORT)), + [uartBit] "I" (UART_TX_BIT) + : + "r25" + ); +#endif +} + +uint8_t getch(void) { + uint8_t ch; + + watchdogReset(); + +#ifdef LED_DATA_FLASH + LED_PIN |= _BV(LED); +#endif + +#ifdef SOFT_UART + __asm__ __volatile__ ( + "1: sbic %[uartPin],%[uartBit]\n" // Wait for start edge + " rjmp 1b\n" + " rcall uartDelay\n" // Get to middle of start bit + "2: rcall uartDelay\n" // Wait 1 bit period + " rcall uartDelay\n" // Wait 1 bit period + " clc\n" + " sbic %[uartPin],%[uartBit]\n" + " sec\n" + " dec %[bitCnt]\n" + " breq 3f\n" + " ror %[ch]\n" + " rjmp 2b\n" + "3:\n" + : + [ch] "=r" (ch) + : + [bitCnt] "d" (9), + [uartPin] "I" (_SFR_IO_ADDR(UART_PIN)), + [uartBit] "I" (UART_RX_BIT) + : + "r25" +); +#else + while(!(UCSR0A & _BV(RXC0))); + ch = UDR0; +#endif + +#ifdef LED_DATA_FLASH + LED_PIN |= _BV(LED); +#endif + + return ch; +} + +#ifdef SOFT_UART +//#define UART_B_VALUE (((F_CPU/BAUD_RATE)-23)/6) +#define UART_B_VALUE (((F_CPU/BAUD_RATE)-20)/6) +#if UART_B_VALUE > 255 +#error Baud rate too slow for soft UART +#endif + +void uartDelay() { + __asm__ __volatile__ ( + "ldi r25,%[count]\n" + "1:dec r25\n" + "brne 1b\n" + "ret\n" + ::[count] "M" (UART_B_VALUE) + ); +} +#endif + +void getNch(uint8_t count) { + do getch(); while (--count); + verifySpace(); +} + +void verifySpace() { + if (getch() != CRC_EOP) appStart(); + putch(STK_INSYNC); +} + +#if LED_START_FLASHES > 0 +void flash_led(uint8_t count) { + do { + TCNT1 = -(F_CPU/(1024*16)); + TIFR1 = _BV(TOV1); + while(!(TIFR1 & _BV(TOV1))); + LED_PIN |= _BV(LED); + watchdogReset(); + } while (--count); +} +#endif + +uint8_t getLen() { + getch(); + length = getch(); + return getch(); +} + +// Watchdog functions. These are only safe with interrupts turned off. +void watchdogReset() { + __asm__ __volatile__ ( + "wdr\n" + ); +} + +void watchdogConfig(uint8_t x) { + WDTCSR = _BV(WDCE) | _BV(WDE); + WDTCSR = x; +} + +void appStart() { + watchdogConfig(WATCHDOG_OFF); + __asm__ __volatile__ ( +#ifdef VIRTUAL_BOOT_PARTITION + // Jump to WDT vector + "ldi r30,5\n" + "clr r31\n" +#else + // Jump to RST vector + "clr r30\n" + "clr r31\n" +#endif + "ijmp\n" + ); +} diff --git a/test/ardmake/hardware/bootloaders/optiboot/optiboot_atmega328.hex b/test/ardmake/hardware/bootloaders/optiboot/optiboot_atmega328.hex new file mode 100644 index 0000000..b1c8567 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/optiboot/optiboot_atmega328.hex @@ -0,0 +1,33 @@ +:107E000085E08093810082E08093C00088E18093C8
+:107E1000C10086E08093C20080E18093C40084B7F3
+:107E200014BE81FFD0D08DE0C8D0259A86E020E333
+:107E30003CEF91E0309385002093840096BBB09B8B
+:107E4000FECF1D9AA8958150A9F7DD24D394A5E013
+:107E5000EA2EF1E1FF2EA4D0813421F481E0BED0DE
+:107E600083E024C0823411F484E103C0853419F422
+:107E700085E0B4D08AC08535A1F492D0082F10E0F7
+:107E800010930102009300028BD090E0982F882776
+:107E9000802B912B880F991F9093010280930002F1
+:107EA00073C0863529F484E099D080E071D06DC02C
+:107EB000843609F043C07CD0E0910002F0910102C9
+:107EC00083E080935700E895C0E0D1E069D08993C2
+:107ED000809102028150809302028823B9F778D002
+:107EE00007B600FCFDCF4091000250910102A0E0D6
+:107EF000B1E02C9130E011968C91119790E0982F81
+:107F00008827822B932B1296FA010C01D0925700EE
+:107F1000E89511244E5F5F4FF1E0A038BF0749F7A5
+:107F2000E0910002F0910102E0925700E89507B657
+:107F300000FCFDCFF0925700E89527C08437B9F4D4
+:107F400037D046D0E0910002F09101023196F093D3
+:107F50000102E09300023197E4918E2F19D08091B5
+:107F60000202815080930202882361F70EC0853798
+:107F700039F42ED08EE10CD085E90AD08FE096CF6F
+:107F8000813511F488E019D023D080E101D063CF8E
+:107F9000982F8091C00085FFFCCF9093C600089574
+:107FA000A8958091C00087FFFCCF8091C6000895FE
+:107FB000F7DFF6DF80930202F3CFE0E6F0E098E12E
+:107FC00090838083089580E0F8DFEE27FF270994EF
+:107FD000E7DF803209F0F7DF84E1DACF1F93182F53
+:0C7FE000DFDF1150E9F7F4DF1F91089576
+:0400000300007E007B
+:00000001FF
diff --git a/test/ardmake/hardware/bootloaders/optiboot/optiboot_atmega328.lst b/test/ardmake/hardware/bootloaders/optiboot/optiboot_atmega328.lst new file mode 100644 index 0000000..888871d --- /dev/null +++ b/test/ardmake/hardware/bootloaders/optiboot/optiboot_atmega328.lst @@ -0,0 +1,520 @@ + +optiboot_atmega328.elf: file format elf32-avr + +Sections: +Idx Name Size VMA LMA File off Algn + 0 .text 000001ec 00007e00 00007e00 00000054 2**1 + CONTENTS, ALLOC, LOAD, READONLY, CODE + 1 .debug_aranges 00000028 00000000 00000000 00000240 2**0 + CONTENTS, READONLY, DEBUGGING + 2 .debug_pubnames 0000006a 00000000 00000000 00000268 2**0 + CONTENTS, READONLY, DEBUGGING + 3 .debug_info 00000269 00000000 00000000 000002d2 2**0 + CONTENTS, READONLY, DEBUGGING + 4 .debug_abbrev 00000196 00000000 00000000 0000053b 2**0 + CONTENTS, READONLY, DEBUGGING + 5 .debug_line 000003d3 00000000 00000000 000006d1 2**0 + CONTENTS, READONLY, DEBUGGING + 6 .debug_frame 00000090 00000000 00000000 00000aa4 2**2 + CONTENTS, READONLY, DEBUGGING + 7 .debug_str 00000135 00000000 00000000 00000b34 2**0 + CONTENTS, READONLY, DEBUGGING + 8 .debug_loc 000001d1 00000000 00000000 00000c69 2**0 + CONTENTS, READONLY, DEBUGGING + 9 .debug_ranges 00000068 00000000 00000000 00000e3a 2**0 + CONTENTS, READONLY, DEBUGGING + +Disassembly of section .text: + +00007e00 <main>: +#ifdef VIRTUAL_BOOT_PARTITION +#define rstVect (*(uint16_t*)(0x204)) +#define wdtVect (*(uint16_t*)(0x206)) +#endif +/* main program starts here */ +int main(void) { + 7e00: 85 e0 ldi r24, 0x05 ; 5 + 7e02: 80 93 81 00 sts 0x0081, r24 +#if LED_START_FLASHES > 0 + // Set up Timer 1 for timeout counter + TCCR1B = _BV(CS12) | _BV(CS10); // div 1024 +#endif +#ifndef SOFT_UART + UCSR0A = _BV(U2X0); //Double speed mode USART0 + 7e06: 82 e0 ldi r24, 0x02 ; 2 + 7e08: 80 93 c0 00 sts 0x00C0, r24 + UCSR0B = _BV(RXEN0) | _BV(TXEN0); + 7e0c: 88 e1 ldi r24, 0x18 ; 24 + 7e0e: 80 93 c1 00 sts 0x00C1, r24 + UCSR0C = _BV(UCSZ00) | _BV(UCSZ01); + 7e12: 86 e0 ldi r24, 0x06 ; 6 + 7e14: 80 93 c2 00 sts 0x00C2, r24 + UBRR0L = (uint8_t)( (F_CPU + BAUD_RATE * 4L) / (BAUD_RATE * 8L) - 1 ); + 7e18: 80 e1 ldi r24, 0x10 ; 16 + 7e1a: 80 93 c4 00 sts 0x00C4, r24 +#endif + + // Adaboot no-wait mod + ch = MCUSR; + 7e1e: 84 b7 in r24, 0x34 ; 52 + MCUSR = 0; + 7e20: 14 be out 0x34, r1 ; 52 + if (!(ch & _BV(EXTRF))) appStart(); + 7e22: 81 ff sbrs r24, 1 + 7e24: d0 d0 rcall .+416 ; 0x7fc6 <appStart> + + // Set up watchdog to trigger after 500ms + watchdogConfig(WATCHDOG_500MS); + 7e26: 8d e0 ldi r24, 0x0D ; 13 + 7e28: c8 d0 rcall .+400 ; 0x7fba <watchdogConfig> + + /* Set LED pin as output */ + LED_DDR |= _BV(LED); + 7e2a: 25 9a sbi 0x04, 5 ; 4 + 7e2c: 86 e0 ldi r24, 0x06 ; 6 +} + +#if LED_START_FLASHES > 0 +void flash_led(uint8_t count) { + do { + TCNT1 = -(F_CPU/(1024*16)); + 7e2e: 20 e3 ldi r18, 0x30 ; 48 + 7e30: 3c ef ldi r19, 0xFC ; 252 + TIFR1 = _BV(TOV1); + 7e32: 91 e0 ldi r25, 0x01 ; 1 +} + +#if LED_START_FLASHES > 0 +void flash_led(uint8_t count) { + do { + TCNT1 = -(F_CPU/(1024*16)); + 7e34: 30 93 85 00 sts 0x0085, r19 + 7e38: 20 93 84 00 sts 0x0084, r18 + TIFR1 = _BV(TOV1); + 7e3c: 96 bb out 0x16, r25 ; 22 + while(!(TIFR1 & _BV(TOV1))); + 7e3e: b0 9b sbis 0x16, 0 ; 22 + 7e40: fe cf rjmp .-4 ; 0x7e3e <main+0x3e> + LED_PIN |= _BV(LED); + 7e42: 1d 9a sbi 0x03, 5 ; 3 + return getch(); +} + +// Watchdog functions. These are only safe with interrupts turned off. +void watchdogReset() { + __asm__ __volatile__ ( + 7e44: a8 95 wdr + TCNT1 = -(F_CPU/(1024*16)); + TIFR1 = _BV(TOV1); + while(!(TIFR1 & _BV(TOV1))); + LED_PIN |= _BV(LED); + watchdogReset(); + } while (--count); + 7e46: 81 50 subi r24, 0x01 ; 1 + 7e48: a9 f7 brne .-22 ; 0x7e34 <main+0x34> + /* get character from UART */ + ch = getch(); + + if(ch == STK_GET_PARAMETER) { + // GET PARAMETER returns a generic 0x03 reply - enough to keep Avrdude happy + getNch(1); + 7e4a: dd 24 eor r13, r13 + 7e4c: d3 94 inc r13 + boot_page_fill((uint16_t)(void*)addrPtr,a); + addrPtr += 2; + } while (--ch); + + // Write from programming buffer + boot_page_write((uint16_t)(void*)address); + 7e4e: a5 e0 ldi r26, 0x05 ; 5 + 7e50: ea 2e mov r14, r26 + boot_spm_busy_wait(); + +#if defined(RWWSRE) + // Reenable read access to flash + boot_rww_enable(); + 7e52: f1 e1 ldi r31, 0x11 ; 17 + 7e54: ff 2e mov r15, r31 +#endif + + /* Forever loop */ + for (;;) { + /* get character from UART */ + ch = getch(); + 7e56: a4 d0 rcall .+328 ; 0x7fa0 <getch> + + if(ch == STK_GET_PARAMETER) { + 7e58: 81 34 cpi r24, 0x41 ; 65 + 7e5a: 21 f4 brne .+8 ; 0x7e64 <main+0x64> + // GET PARAMETER returns a generic 0x03 reply - enough to keep Avrdude happy + getNch(1); + 7e5c: 81 e0 ldi r24, 0x01 ; 1 + 7e5e: be d0 rcall .+380 ; 0x7fdc <verifySpace+0xc> + putch(0x03); + 7e60: 83 e0 ldi r24, 0x03 ; 3 + 7e62: 24 c0 rjmp .+72 ; 0x7eac <main+0xac> + } + else if(ch == STK_SET_DEVICE) { + 7e64: 82 34 cpi r24, 0x42 ; 66 + 7e66: 11 f4 brne .+4 ; 0x7e6c <main+0x6c> + // SET DEVICE is ignored + getNch(20); + 7e68: 84 e1 ldi r24, 0x14 ; 20 + 7e6a: 03 c0 rjmp .+6 ; 0x7e72 <main+0x72> + } + else if(ch == STK_SET_DEVICE_EXT) { + 7e6c: 85 34 cpi r24, 0x45 ; 69 + 7e6e: 19 f4 brne .+6 ; 0x7e76 <main+0x76> + // SET DEVICE EXT is ignored + getNch(5); + 7e70: 85 e0 ldi r24, 0x05 ; 5 + 7e72: b4 d0 rcall .+360 ; 0x7fdc <verifySpace+0xc> + 7e74: 8a c0 rjmp .+276 ; 0x7f8a <main+0x18a> + } + else if(ch == STK_LOAD_ADDRESS) { + 7e76: 85 35 cpi r24, 0x55 ; 85 + 7e78: a1 f4 brne .+40 ; 0x7ea2 <main+0xa2> + // LOAD ADDRESS + address = getch(); + 7e7a: 92 d0 rcall .+292 ; 0x7fa0 <getch> + 7e7c: 08 2f mov r16, r24 + 7e7e: 10 e0 ldi r17, 0x00 ; 0 + 7e80: 10 93 01 02 sts 0x0201, r17 + 7e84: 00 93 00 02 sts 0x0200, r16 + address = (address & 0xff) | (getch() << 8); + 7e88: 8b d0 rcall .+278 ; 0x7fa0 <getch> + 7e8a: 90 e0 ldi r25, 0x00 ; 0 + 7e8c: 98 2f mov r25, r24 + 7e8e: 88 27 eor r24, r24 + 7e90: 80 2b or r24, r16 + 7e92: 91 2b or r25, r17 + address += address; // Convert from word address to byte address + 7e94: 88 0f add r24, r24 + 7e96: 99 1f adc r25, r25 + 7e98: 90 93 01 02 sts 0x0201, r25 + 7e9c: 80 93 00 02 sts 0x0200, r24 + 7ea0: 73 c0 rjmp .+230 ; 0x7f88 <main+0x188> + verifySpace(); + } + else if(ch == STK_UNIVERSAL) { + 7ea2: 86 35 cpi r24, 0x56 ; 86 + 7ea4: 29 f4 brne .+10 ; 0x7eb0 <main+0xb0> + // UNIVERSAL command is ignored + getNch(4); + 7ea6: 84 e0 ldi r24, 0x04 ; 4 + 7ea8: 99 d0 rcall .+306 ; 0x7fdc <verifySpace+0xc> + putch(0x00); + 7eaa: 80 e0 ldi r24, 0x00 ; 0 + 7eac: 71 d0 rcall .+226 ; 0x7f90 <putch> + 7eae: 6d c0 rjmp .+218 ; 0x7f8a <main+0x18a> + } + /* Write memory, length is big endian and is in bytes */ + else if(ch == STK_PROG_PAGE) { + 7eb0: 84 36 cpi r24, 0x64 ; 100 + 7eb2: 09 f0 breq .+2 ; 0x7eb6 <main+0xb6> + 7eb4: 43 c0 rjmp .+134 ; 0x7f3c <main+0x13c> + // PROGRAM PAGE - we support flash programming only, not EEPROM + uint8_t *bufPtr; + uint16_t addrPtr; + + getLen(); + 7eb6: 7c d0 rcall .+248 ; 0x7fb0 <getLen> + + // Immediately start page erase - this will 4.5ms + boot_page_erase((uint16_t)(void*)address); + 7eb8: e0 91 00 02 lds r30, 0x0200 + 7ebc: f0 91 01 02 lds r31, 0x0201 + 7ec0: 83 e0 ldi r24, 0x03 ; 3 + 7ec2: 80 93 57 00 sts 0x0057, r24 + 7ec6: e8 95 spm + 7ec8: c0 e0 ldi r28, 0x00 ; 0 + 7eca: d1 e0 ldi r29, 0x01 ; 1 + + // While that is going on, read in page contents + bufPtr = buff; + do *bufPtr++ = getch(); + 7ecc: 69 d0 rcall .+210 ; 0x7fa0 <getch> + 7ece: 89 93 st Y+, r24 + while (--length); + 7ed0: 80 91 02 02 lds r24, 0x0202 + 7ed4: 81 50 subi r24, 0x01 ; 1 + 7ed6: 80 93 02 02 sts 0x0202, r24 + 7eda: 88 23 and r24, r24 + 7edc: b9 f7 brne .-18 ; 0x7ecc <main+0xcc> + + // Read command terminator, start reply + verifySpace(); + 7ede: 78 d0 rcall .+240 ; 0x7fd0 <verifySpace> + + // If only a partial page is to be programmed, the erase might not be complete. + // So check that here + boot_spm_busy_wait(); + 7ee0: 07 b6 in r0, 0x37 ; 55 + 7ee2: 00 fc sbrc r0, 0 + 7ee4: fd cf rjmp .-6 ; 0x7ee0 <main+0xe0> + } +#endif + + // Copy buffer into programming buffer + bufPtr = buff; + addrPtr = (uint16_t)(void*)address; + 7ee6: 40 91 00 02 lds r20, 0x0200 + 7eea: 50 91 01 02 lds r21, 0x0201 + 7eee: a0 e0 ldi r26, 0x00 ; 0 + 7ef0: b1 e0 ldi r27, 0x01 ; 1 + ch = SPM_PAGESIZE / 2; + do { + uint16_t a; + a = *bufPtr++; + 7ef2: 2c 91 ld r18, X + 7ef4: 30 e0 ldi r19, 0x00 ; 0 + a |= (*bufPtr++) << 8; + 7ef6: 11 96 adiw r26, 0x01 ; 1 + 7ef8: 8c 91 ld r24, X + 7efa: 11 97 sbiw r26, 0x01 ; 1 + 7efc: 90 e0 ldi r25, 0x00 ; 0 + 7efe: 98 2f mov r25, r24 + 7f00: 88 27 eor r24, r24 + 7f02: 82 2b or r24, r18 + 7f04: 93 2b or r25, r19 +#ifdef VIRTUAL_BOOT_PARTITION +#define rstVect (*(uint16_t*)(0x204)) +#define wdtVect (*(uint16_t*)(0x206)) +#endif +/* main program starts here */ +int main(void) { + 7f06: 12 96 adiw r26, 0x02 ; 2 + ch = SPM_PAGESIZE / 2; + do { + uint16_t a; + a = *bufPtr++; + a |= (*bufPtr++) << 8; + boot_page_fill((uint16_t)(void*)addrPtr,a); + 7f08: fa 01 movw r30, r20 + 7f0a: 0c 01 movw r0, r24 + 7f0c: d0 92 57 00 sts 0x0057, r13 + 7f10: e8 95 spm + 7f12: 11 24 eor r1, r1 + addrPtr += 2; + 7f14: 4e 5f subi r20, 0xFE ; 254 + 7f16: 5f 4f sbci r21, 0xFF ; 255 + } while (--ch); + 7f18: f1 e0 ldi r31, 0x01 ; 1 + 7f1a: a0 38 cpi r26, 0x80 ; 128 + 7f1c: bf 07 cpc r27, r31 + 7f1e: 49 f7 brne .-46 ; 0x7ef2 <main+0xf2> + + // Write from programming buffer + boot_page_write((uint16_t)(void*)address); + 7f20: e0 91 00 02 lds r30, 0x0200 + 7f24: f0 91 01 02 lds r31, 0x0201 + 7f28: e0 92 57 00 sts 0x0057, r14 + 7f2c: e8 95 spm + boot_spm_busy_wait(); + 7f2e: 07 b6 in r0, 0x37 ; 55 + 7f30: 00 fc sbrc r0, 0 + 7f32: fd cf rjmp .-6 ; 0x7f2e <main+0x12e> + +#if defined(RWWSRE) + // Reenable read access to flash + boot_rww_enable(); + 7f34: f0 92 57 00 sts 0x0057, r15 + 7f38: e8 95 spm + 7f3a: 27 c0 rjmp .+78 ; 0x7f8a <main+0x18a> +#endif + + } + /* Read memory block mode, length is big endian. */ + else if(ch == STK_READ_PAGE) { + 7f3c: 84 37 cpi r24, 0x74 ; 116 + 7f3e: b9 f4 brne .+46 ; 0x7f6e <main+0x16e> + // READ PAGE - we only read flash + getLen(); + 7f40: 37 d0 rcall .+110 ; 0x7fb0 <getLen> + verifySpace(); + 7f42: 46 d0 rcall .+140 ; 0x7fd0 <verifySpace> + else ch = pgm_read_byte_near(address); + address++; + putch(ch); + } while (--length); +#else + do putch(pgm_read_byte_near(address++)); + 7f44: e0 91 00 02 lds r30, 0x0200 + 7f48: f0 91 01 02 lds r31, 0x0201 + 7f4c: 31 96 adiw r30, 0x01 ; 1 + 7f4e: f0 93 01 02 sts 0x0201, r31 + 7f52: e0 93 00 02 sts 0x0200, r30 + 7f56: 31 97 sbiw r30, 0x01 ; 1 + 7f58: e4 91 lpm r30, Z+ + 7f5a: 8e 2f mov r24, r30 + 7f5c: 19 d0 rcall .+50 ; 0x7f90 <putch> + while (--length); + 7f5e: 80 91 02 02 lds r24, 0x0202 + 7f62: 81 50 subi r24, 0x01 ; 1 + 7f64: 80 93 02 02 sts 0x0202, r24 + 7f68: 88 23 and r24, r24 + 7f6a: 61 f7 brne .-40 ; 0x7f44 <main+0x144> + 7f6c: 0e c0 rjmp .+28 ; 0x7f8a <main+0x18a> +#endif + } + + /* Get device signature bytes */ + else if(ch == STK_READ_SIGN) { + 7f6e: 85 37 cpi r24, 0x75 ; 117 + 7f70: 39 f4 brne .+14 ; 0x7f80 <main+0x180> + // READ SIGN - return what Avrdude wants to hear + verifySpace(); + 7f72: 2e d0 rcall .+92 ; 0x7fd0 <verifySpace> + putch(SIGNATURE_0); + 7f74: 8e e1 ldi r24, 0x1E ; 30 + 7f76: 0c d0 rcall .+24 ; 0x7f90 <putch> + putch(SIGNATURE_1); + 7f78: 85 e9 ldi r24, 0x95 ; 149 + 7f7a: 0a d0 rcall .+20 ; 0x7f90 <putch> + putch(SIGNATURE_2); + 7f7c: 8f e0 ldi r24, 0x0F ; 15 + 7f7e: 96 cf rjmp .-212 ; 0x7eac <main+0xac> + } + else if (ch == 'Q') { + 7f80: 81 35 cpi r24, 0x51 ; 81 + 7f82: 11 f4 brne .+4 ; 0x7f88 <main+0x188> + // Adaboot no-wait mod + watchdogConfig(WATCHDOG_16MS); + 7f84: 88 e0 ldi r24, 0x08 ; 8 + 7f86: 19 d0 rcall .+50 ; 0x7fba <watchdogConfig> + verifySpace(); + } + else { + // This covers the response to commands like STK_ENTER_PROGMODE + verifySpace(); + 7f88: 23 d0 rcall .+70 ; 0x7fd0 <verifySpace> + } + putch(STK_OK); + 7f8a: 80 e1 ldi r24, 0x10 ; 16 + 7f8c: 01 d0 rcall .+2 ; 0x7f90 <putch> + 7f8e: 63 cf rjmp .-314 ; 0x7e56 <main+0x56> + +00007f90 <putch>: + } +} + +void putch(char ch) { + 7f90: 98 2f mov r25, r24 +#ifndef SOFT_UART + while (!(UCSR0A & _BV(UDRE0))); + 7f92: 80 91 c0 00 lds r24, 0x00C0 + 7f96: 85 ff sbrs r24, 5 + 7f98: fc cf rjmp .-8 ; 0x7f92 <putch+0x2> + UDR0 = ch; + 7f9a: 90 93 c6 00 sts 0x00C6, r25 + [uartBit] "I" (UART_TX_BIT) + : + "r25" + ); +#endif +} + 7f9e: 08 95 ret + +00007fa0 <getch>: + return getch(); +} + +// Watchdog functions. These are only safe with interrupts turned off. +void watchdogReset() { + __asm__ __volatile__ ( + 7fa0: a8 95 wdr + [uartBit] "I" (UART_RX_BIT) + : + "r25" +); +#else + while(!(UCSR0A & _BV(RXC0))); + 7fa2: 80 91 c0 00 lds r24, 0x00C0 + 7fa6: 87 ff sbrs r24, 7 + 7fa8: fc cf rjmp .-8 ; 0x7fa2 <getch+0x2> + ch = UDR0; + 7faa: 80 91 c6 00 lds r24, 0x00C6 +#ifdef LED_DATA_FLASH + LED_PIN |= _BV(LED); +#endif + + return ch; +} + 7fae: 08 95 ret + +00007fb0 <getLen>: + } while (--count); +} +#endif + +uint8_t getLen() { + getch(); + 7fb0: f7 df rcall .-18 ; 0x7fa0 <getch> + length = getch(); + 7fb2: f6 df rcall .-20 ; 0x7fa0 <getch> + 7fb4: 80 93 02 02 sts 0x0202, r24 + return getch(); +} + 7fb8: f3 cf rjmp .-26 ; 0x7fa0 <getch> + +00007fba <watchdogConfig>: + "wdr\n" + ); +} + +void watchdogConfig(uint8_t x) { + WDTCSR = _BV(WDCE) | _BV(WDE); + 7fba: e0 e6 ldi r30, 0x60 ; 96 + 7fbc: f0 e0 ldi r31, 0x00 ; 0 + 7fbe: 98 e1 ldi r25, 0x18 ; 24 + 7fc0: 90 83 st Z, r25 + WDTCSR = x; + 7fc2: 80 83 st Z, r24 +} + 7fc4: 08 95 ret + +00007fc6 <appStart>: + +void appStart() { + watchdogConfig(WATCHDOG_OFF); + 7fc6: 80 e0 ldi r24, 0x00 ; 0 + 7fc8: f8 df rcall .-16 ; 0x7fba <watchdogConfig> + __asm__ __volatile__ ( + 7fca: ee 27 eor r30, r30 + 7fcc: ff 27 eor r31, r31 + 7fce: 09 94 ijmp + +00007fd0 <verifySpace>: + do getch(); while (--count); + verifySpace(); +} + +void verifySpace() { + if (getch() != CRC_EOP) appStart(); + 7fd0: e7 df rcall .-50 ; 0x7fa0 <getch> + 7fd2: 80 32 cpi r24, 0x20 ; 32 + 7fd4: 09 f0 breq .+2 ; 0x7fd8 <verifySpace+0x8> + 7fd6: f7 df rcall .-18 ; 0x7fc6 <appStart> + putch(STK_INSYNC); + 7fd8: 84 e1 ldi r24, 0x14 ; 20 +} + 7fda: da cf rjmp .-76 ; 0x7f90 <putch> + ::[count] "M" (UART_B_VALUE) + ); +} +#endif + +void getNch(uint8_t count) { + 7fdc: 1f 93 push r17 + 7fde: 18 2f mov r17, r24 + +00007fe0 <getNch>: + do getch(); while (--count); + 7fe0: df df rcall .-66 ; 0x7fa0 <getch> + 7fe2: 11 50 subi r17, 0x01 ; 1 + 7fe4: e9 f7 brne .-6 ; 0x7fe0 <getNch> + verifySpace(); + 7fe6: f4 df rcall .-24 ; 0x7fd0 <verifySpace> +} + 7fe8: 1f 91 pop r17 + 7fea: 08 95 ret diff --git a/test/ardmake/hardware/bootloaders/optiboot/optiboot_atmega328_pro_8MHz.hex b/test/ardmake/hardware/bootloaders/optiboot/optiboot_atmega328_pro_8MHz.hex new file mode 100644 index 0000000..d6ac145 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/optiboot/optiboot_atmega328_pro_8MHz.hex @@ -0,0 +1,33 @@ +:107E000085E08093810082E08093C00088E18093C8
+:107E1000C10086E08093C20088E08093C40084B7EC
+:107E200014BE81FFD0D08DE0C8D0259A86E028E12D
+:107E30003EEF91E0309385002093840096BBB09B89
+:107E4000FECF1D9AA8958150A9F7DD24D394A5E013
+:107E5000EA2EF1E1FF2EA4D0813421F481E0BED0DE
+:107E600083E024C0823411F484E103C0853419F422
+:107E700085E0B4D08AC08535A1F492D0082F10E0F7
+:107E800010930102009300028BD090E0982F882776
+:107E9000802B912B880F991F9093010280930002F1
+:107EA00073C0863529F484E099D080E071D06DC02C
+:107EB000843609F043C07CD0E0910002F0910102C9
+:107EC00083E080935700E895C0E0D1E069D08993C2
+:107ED000809102028150809302028823B9F778D002
+:107EE00007B600FCFDCF4091000250910102A0E0D6
+:107EF000B1E02C9130E011968C91119790E0982F81
+:107F00008827822B932B1296FA010C01D0925700EE
+:107F1000E89511244E5F5F4FF1E0A038BF0749F7A5
+:107F2000E0910002F0910102E0925700E89507B657
+:107F300000FCFDCFF0925700E89527C08437B9F4D4
+:107F400037D046D0E0910002F09101023196F093D3
+:107F50000102E09300023197E4918E2F19D08091B5
+:107F60000202815080930202882361F70EC0853798
+:107F700039F42ED08EE10CD085E90AD08FE096CF6F
+:107F8000813511F488E019D023D080E101D063CF8E
+:107F9000982F8091C00085FFFCCF9093C600089574
+:107FA000A8958091C00087FFFCCF8091C6000895FE
+:107FB000F7DFF6DF80930202F3CFE0E6F0E098E12E
+:107FC00090838083089580E0F8DFEE27FF270994EF
+:107FD000E7DF803209F0F7DF84E1DACF1F93182F53
+:0C7FE000DFDF1150E9F7F4DF1F91089576
+:0400000300007E007B
+:00000001FF
diff --git a/test/ardmake/hardware/bootloaders/optiboot/optiboot_atmega328_pro_8MHz.lst b/test/ardmake/hardware/bootloaders/optiboot/optiboot_atmega328_pro_8MHz.lst new file mode 100644 index 0000000..46eda68 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/optiboot/optiboot_atmega328_pro_8MHz.lst @@ -0,0 +1,520 @@ + +optiboot_atmega328_pro_8MHz.elf: file format elf32-avr + +Sections: +Idx Name Size VMA LMA File off Algn + 0 .text 000001ec 00007e00 00007e00 00000054 2**1 + CONTENTS, ALLOC, LOAD, READONLY, CODE + 1 .debug_aranges 00000028 00000000 00000000 00000240 2**0 + CONTENTS, READONLY, DEBUGGING + 2 .debug_pubnames 0000006a 00000000 00000000 00000268 2**0 + CONTENTS, READONLY, DEBUGGING + 3 .debug_info 00000269 00000000 00000000 000002d2 2**0 + CONTENTS, READONLY, DEBUGGING + 4 .debug_abbrev 00000196 00000000 00000000 0000053b 2**0 + CONTENTS, READONLY, DEBUGGING + 5 .debug_line 000003d3 00000000 00000000 000006d1 2**0 + CONTENTS, READONLY, DEBUGGING + 6 .debug_frame 00000090 00000000 00000000 00000aa4 2**2 + CONTENTS, READONLY, DEBUGGING + 7 .debug_str 00000135 00000000 00000000 00000b34 2**0 + CONTENTS, READONLY, DEBUGGING + 8 .debug_loc 000001d1 00000000 00000000 00000c69 2**0 + CONTENTS, READONLY, DEBUGGING + 9 .debug_ranges 00000068 00000000 00000000 00000e3a 2**0 + CONTENTS, READONLY, DEBUGGING + +Disassembly of section .text: + +00007e00 <main>: +#ifdef VIRTUAL_BOOT_PARTITION +#define rstVect (*(uint16_t*)(0x204)) +#define wdtVect (*(uint16_t*)(0x206)) +#endif +/* main program starts here */ +int main(void) { + 7e00: 85 e0 ldi r24, 0x05 ; 5 + 7e02: 80 93 81 00 sts 0x0081, r24 +#if LED_START_FLASHES > 0 + // Set up Timer 1 for timeout counter + TCCR1B = _BV(CS12) | _BV(CS10); // div 1024 +#endif +#ifndef SOFT_UART + UCSR0A = _BV(U2X0); //Double speed mode USART0 + 7e06: 82 e0 ldi r24, 0x02 ; 2 + 7e08: 80 93 c0 00 sts 0x00C0, r24 + UCSR0B = _BV(RXEN0) | _BV(TXEN0); + 7e0c: 88 e1 ldi r24, 0x18 ; 24 + 7e0e: 80 93 c1 00 sts 0x00C1, r24 + UCSR0C = _BV(UCSZ00) | _BV(UCSZ01); + 7e12: 86 e0 ldi r24, 0x06 ; 6 + 7e14: 80 93 c2 00 sts 0x00C2, r24 + UBRR0L = (uint8_t)( (F_CPU + BAUD_RATE * 4L) / (BAUD_RATE * 8L) - 1 ); + 7e18: 88 e0 ldi r24, 0x08 ; 8 + 7e1a: 80 93 c4 00 sts 0x00C4, r24 +#endif + + // Adaboot no-wait mod + ch = MCUSR; + 7e1e: 84 b7 in r24, 0x34 ; 52 + MCUSR = 0; + 7e20: 14 be out 0x34, r1 ; 52 + if (!(ch & _BV(EXTRF))) appStart(); + 7e22: 81 ff sbrs r24, 1 + 7e24: d0 d0 rcall .+416 ; 0x7fc6 <appStart> + + // Set up watchdog to trigger after 500ms + watchdogConfig(WATCHDOG_500MS); + 7e26: 8d e0 ldi r24, 0x0D ; 13 + 7e28: c8 d0 rcall .+400 ; 0x7fba <watchdogConfig> + + /* Set LED pin as output */ + LED_DDR |= _BV(LED); + 7e2a: 25 9a sbi 0x04, 5 ; 4 + 7e2c: 86 e0 ldi r24, 0x06 ; 6 +} + +#if LED_START_FLASHES > 0 +void flash_led(uint8_t count) { + do { + TCNT1 = -(F_CPU/(1024*16)); + 7e2e: 28 e1 ldi r18, 0x18 ; 24 + 7e30: 3e ef ldi r19, 0xFE ; 254 + TIFR1 = _BV(TOV1); + 7e32: 91 e0 ldi r25, 0x01 ; 1 +} + +#if LED_START_FLASHES > 0 +void flash_led(uint8_t count) { + do { + TCNT1 = -(F_CPU/(1024*16)); + 7e34: 30 93 85 00 sts 0x0085, r19 + 7e38: 20 93 84 00 sts 0x0084, r18 + TIFR1 = _BV(TOV1); + 7e3c: 96 bb out 0x16, r25 ; 22 + while(!(TIFR1 & _BV(TOV1))); + 7e3e: b0 9b sbis 0x16, 0 ; 22 + 7e40: fe cf rjmp .-4 ; 0x7e3e <main+0x3e> + LED_PIN |= _BV(LED); + 7e42: 1d 9a sbi 0x03, 5 ; 3 + return getch(); +} + +// Watchdog functions. These are only safe with interrupts turned off. +void watchdogReset() { + __asm__ __volatile__ ( + 7e44: a8 95 wdr + TCNT1 = -(F_CPU/(1024*16)); + TIFR1 = _BV(TOV1); + while(!(TIFR1 & _BV(TOV1))); + LED_PIN |= _BV(LED); + watchdogReset(); + } while (--count); + 7e46: 81 50 subi r24, 0x01 ; 1 + 7e48: a9 f7 brne .-22 ; 0x7e34 <main+0x34> + /* get character from UART */ + ch = getch(); + + if(ch == STK_GET_PARAMETER) { + // GET PARAMETER returns a generic 0x03 reply - enough to keep Avrdude happy + getNch(1); + 7e4a: dd 24 eor r13, r13 + 7e4c: d3 94 inc r13 + boot_page_fill((uint16_t)(void*)addrPtr,a); + addrPtr += 2; + } while (--ch); + + // Write from programming buffer + boot_page_write((uint16_t)(void*)address); + 7e4e: a5 e0 ldi r26, 0x05 ; 5 + 7e50: ea 2e mov r14, r26 + boot_spm_busy_wait(); + +#if defined(RWWSRE) + // Reenable read access to flash + boot_rww_enable(); + 7e52: f1 e1 ldi r31, 0x11 ; 17 + 7e54: ff 2e mov r15, r31 +#endif + + /* Forever loop */ + for (;;) { + /* get character from UART */ + ch = getch(); + 7e56: a4 d0 rcall .+328 ; 0x7fa0 <getch> + + if(ch == STK_GET_PARAMETER) { + 7e58: 81 34 cpi r24, 0x41 ; 65 + 7e5a: 21 f4 brne .+8 ; 0x7e64 <main+0x64> + // GET PARAMETER returns a generic 0x03 reply - enough to keep Avrdude happy + getNch(1); + 7e5c: 81 e0 ldi r24, 0x01 ; 1 + 7e5e: be d0 rcall .+380 ; 0x7fdc <verifySpace+0xc> + putch(0x03); + 7e60: 83 e0 ldi r24, 0x03 ; 3 + 7e62: 24 c0 rjmp .+72 ; 0x7eac <main+0xac> + } + else if(ch == STK_SET_DEVICE) { + 7e64: 82 34 cpi r24, 0x42 ; 66 + 7e66: 11 f4 brne .+4 ; 0x7e6c <main+0x6c> + // SET DEVICE is ignored + getNch(20); + 7e68: 84 e1 ldi r24, 0x14 ; 20 + 7e6a: 03 c0 rjmp .+6 ; 0x7e72 <main+0x72> + } + else if(ch == STK_SET_DEVICE_EXT) { + 7e6c: 85 34 cpi r24, 0x45 ; 69 + 7e6e: 19 f4 brne .+6 ; 0x7e76 <main+0x76> + // SET DEVICE EXT is ignored + getNch(5); + 7e70: 85 e0 ldi r24, 0x05 ; 5 + 7e72: b4 d0 rcall .+360 ; 0x7fdc <verifySpace+0xc> + 7e74: 8a c0 rjmp .+276 ; 0x7f8a <main+0x18a> + } + else if(ch == STK_LOAD_ADDRESS) { + 7e76: 85 35 cpi r24, 0x55 ; 85 + 7e78: a1 f4 brne .+40 ; 0x7ea2 <main+0xa2> + // LOAD ADDRESS + address = getch(); + 7e7a: 92 d0 rcall .+292 ; 0x7fa0 <getch> + 7e7c: 08 2f mov r16, r24 + 7e7e: 10 e0 ldi r17, 0x00 ; 0 + 7e80: 10 93 01 02 sts 0x0201, r17 + 7e84: 00 93 00 02 sts 0x0200, r16 + address = (address & 0xff) | (getch() << 8); + 7e88: 8b d0 rcall .+278 ; 0x7fa0 <getch> + 7e8a: 90 e0 ldi r25, 0x00 ; 0 + 7e8c: 98 2f mov r25, r24 + 7e8e: 88 27 eor r24, r24 + 7e90: 80 2b or r24, r16 + 7e92: 91 2b or r25, r17 + address += address; // Convert from word address to byte address + 7e94: 88 0f add r24, r24 + 7e96: 99 1f adc r25, r25 + 7e98: 90 93 01 02 sts 0x0201, r25 + 7e9c: 80 93 00 02 sts 0x0200, r24 + 7ea0: 73 c0 rjmp .+230 ; 0x7f88 <main+0x188> + verifySpace(); + } + else if(ch == STK_UNIVERSAL) { + 7ea2: 86 35 cpi r24, 0x56 ; 86 + 7ea4: 29 f4 brne .+10 ; 0x7eb0 <main+0xb0> + // UNIVERSAL command is ignored + getNch(4); + 7ea6: 84 e0 ldi r24, 0x04 ; 4 + 7ea8: 99 d0 rcall .+306 ; 0x7fdc <verifySpace+0xc> + putch(0x00); + 7eaa: 80 e0 ldi r24, 0x00 ; 0 + 7eac: 71 d0 rcall .+226 ; 0x7f90 <putch> + 7eae: 6d c0 rjmp .+218 ; 0x7f8a <main+0x18a> + } + /* Write memory, length is big endian and is in bytes */ + else if(ch == STK_PROG_PAGE) { + 7eb0: 84 36 cpi r24, 0x64 ; 100 + 7eb2: 09 f0 breq .+2 ; 0x7eb6 <main+0xb6> + 7eb4: 43 c0 rjmp .+134 ; 0x7f3c <main+0x13c> + // PROGRAM PAGE - we support flash programming only, not EEPROM + uint8_t *bufPtr; + uint16_t addrPtr; + + getLen(); + 7eb6: 7c d0 rcall .+248 ; 0x7fb0 <getLen> + + // Immediately start page erase - this will 4.5ms + boot_page_erase((uint16_t)(void*)address); + 7eb8: e0 91 00 02 lds r30, 0x0200 + 7ebc: f0 91 01 02 lds r31, 0x0201 + 7ec0: 83 e0 ldi r24, 0x03 ; 3 + 7ec2: 80 93 57 00 sts 0x0057, r24 + 7ec6: e8 95 spm + 7ec8: c0 e0 ldi r28, 0x00 ; 0 + 7eca: d1 e0 ldi r29, 0x01 ; 1 + + // While that is going on, read in page contents + bufPtr = buff; + do *bufPtr++ = getch(); + 7ecc: 69 d0 rcall .+210 ; 0x7fa0 <getch> + 7ece: 89 93 st Y+, r24 + while (--length); + 7ed0: 80 91 02 02 lds r24, 0x0202 + 7ed4: 81 50 subi r24, 0x01 ; 1 + 7ed6: 80 93 02 02 sts 0x0202, r24 + 7eda: 88 23 and r24, r24 + 7edc: b9 f7 brne .-18 ; 0x7ecc <main+0xcc> + + // Read command terminator, start reply + verifySpace(); + 7ede: 78 d0 rcall .+240 ; 0x7fd0 <verifySpace> + + // If only a partial page is to be programmed, the erase might not be complete. + // So check that here + boot_spm_busy_wait(); + 7ee0: 07 b6 in r0, 0x37 ; 55 + 7ee2: 00 fc sbrc r0, 0 + 7ee4: fd cf rjmp .-6 ; 0x7ee0 <main+0xe0> + } +#endif + + // Copy buffer into programming buffer + bufPtr = buff; + addrPtr = (uint16_t)(void*)address; + 7ee6: 40 91 00 02 lds r20, 0x0200 + 7eea: 50 91 01 02 lds r21, 0x0201 + 7eee: a0 e0 ldi r26, 0x00 ; 0 + 7ef0: b1 e0 ldi r27, 0x01 ; 1 + ch = SPM_PAGESIZE / 2; + do { + uint16_t a; + a = *bufPtr++; + 7ef2: 2c 91 ld r18, X + 7ef4: 30 e0 ldi r19, 0x00 ; 0 + a |= (*bufPtr++) << 8; + 7ef6: 11 96 adiw r26, 0x01 ; 1 + 7ef8: 8c 91 ld r24, X + 7efa: 11 97 sbiw r26, 0x01 ; 1 + 7efc: 90 e0 ldi r25, 0x00 ; 0 + 7efe: 98 2f mov r25, r24 + 7f00: 88 27 eor r24, r24 + 7f02: 82 2b or r24, r18 + 7f04: 93 2b or r25, r19 +#ifdef VIRTUAL_BOOT_PARTITION +#define rstVect (*(uint16_t*)(0x204)) +#define wdtVect (*(uint16_t*)(0x206)) +#endif +/* main program starts here */ +int main(void) { + 7f06: 12 96 adiw r26, 0x02 ; 2 + ch = SPM_PAGESIZE / 2; + do { + uint16_t a; + a = *bufPtr++; + a |= (*bufPtr++) << 8; + boot_page_fill((uint16_t)(void*)addrPtr,a); + 7f08: fa 01 movw r30, r20 + 7f0a: 0c 01 movw r0, r24 + 7f0c: d0 92 57 00 sts 0x0057, r13 + 7f10: e8 95 spm + 7f12: 11 24 eor r1, r1 + addrPtr += 2; + 7f14: 4e 5f subi r20, 0xFE ; 254 + 7f16: 5f 4f sbci r21, 0xFF ; 255 + } while (--ch); + 7f18: f1 e0 ldi r31, 0x01 ; 1 + 7f1a: a0 38 cpi r26, 0x80 ; 128 + 7f1c: bf 07 cpc r27, r31 + 7f1e: 49 f7 brne .-46 ; 0x7ef2 <main+0xf2> + + // Write from programming buffer + boot_page_write((uint16_t)(void*)address); + 7f20: e0 91 00 02 lds r30, 0x0200 + 7f24: f0 91 01 02 lds r31, 0x0201 + 7f28: e0 92 57 00 sts 0x0057, r14 + 7f2c: e8 95 spm + boot_spm_busy_wait(); + 7f2e: 07 b6 in r0, 0x37 ; 55 + 7f30: 00 fc sbrc r0, 0 + 7f32: fd cf rjmp .-6 ; 0x7f2e <main+0x12e> + +#if defined(RWWSRE) + // Reenable read access to flash + boot_rww_enable(); + 7f34: f0 92 57 00 sts 0x0057, r15 + 7f38: e8 95 spm + 7f3a: 27 c0 rjmp .+78 ; 0x7f8a <main+0x18a> +#endif + + } + /* Read memory block mode, length is big endian. */ + else if(ch == STK_READ_PAGE) { + 7f3c: 84 37 cpi r24, 0x74 ; 116 + 7f3e: b9 f4 brne .+46 ; 0x7f6e <main+0x16e> + // READ PAGE - we only read flash + getLen(); + 7f40: 37 d0 rcall .+110 ; 0x7fb0 <getLen> + verifySpace(); + 7f42: 46 d0 rcall .+140 ; 0x7fd0 <verifySpace> + else ch = pgm_read_byte_near(address); + address++; + putch(ch); + } while (--length); +#else + do putch(pgm_read_byte_near(address++)); + 7f44: e0 91 00 02 lds r30, 0x0200 + 7f48: f0 91 01 02 lds r31, 0x0201 + 7f4c: 31 96 adiw r30, 0x01 ; 1 + 7f4e: f0 93 01 02 sts 0x0201, r31 + 7f52: e0 93 00 02 sts 0x0200, r30 + 7f56: 31 97 sbiw r30, 0x01 ; 1 + 7f58: e4 91 lpm r30, Z+ + 7f5a: 8e 2f mov r24, r30 + 7f5c: 19 d0 rcall .+50 ; 0x7f90 <putch> + while (--length); + 7f5e: 80 91 02 02 lds r24, 0x0202 + 7f62: 81 50 subi r24, 0x01 ; 1 + 7f64: 80 93 02 02 sts 0x0202, r24 + 7f68: 88 23 and r24, r24 + 7f6a: 61 f7 brne .-40 ; 0x7f44 <main+0x144> + 7f6c: 0e c0 rjmp .+28 ; 0x7f8a <main+0x18a> +#endif + } + + /* Get device signature bytes */ + else if(ch == STK_READ_SIGN) { + 7f6e: 85 37 cpi r24, 0x75 ; 117 + 7f70: 39 f4 brne .+14 ; 0x7f80 <main+0x180> + // READ SIGN - return what Avrdude wants to hear + verifySpace(); + 7f72: 2e d0 rcall .+92 ; 0x7fd0 <verifySpace> + putch(SIGNATURE_0); + 7f74: 8e e1 ldi r24, 0x1E ; 30 + 7f76: 0c d0 rcall .+24 ; 0x7f90 <putch> + putch(SIGNATURE_1); + 7f78: 85 e9 ldi r24, 0x95 ; 149 + 7f7a: 0a d0 rcall .+20 ; 0x7f90 <putch> + putch(SIGNATURE_2); + 7f7c: 8f e0 ldi r24, 0x0F ; 15 + 7f7e: 96 cf rjmp .-212 ; 0x7eac <main+0xac> + } + else if (ch == 'Q') { + 7f80: 81 35 cpi r24, 0x51 ; 81 + 7f82: 11 f4 brne .+4 ; 0x7f88 <main+0x188> + // Adaboot no-wait mod + watchdogConfig(WATCHDOG_16MS); + 7f84: 88 e0 ldi r24, 0x08 ; 8 + 7f86: 19 d0 rcall .+50 ; 0x7fba <watchdogConfig> + verifySpace(); + } + else { + // This covers the response to commands like STK_ENTER_PROGMODE + verifySpace(); + 7f88: 23 d0 rcall .+70 ; 0x7fd0 <verifySpace> + } + putch(STK_OK); + 7f8a: 80 e1 ldi r24, 0x10 ; 16 + 7f8c: 01 d0 rcall .+2 ; 0x7f90 <putch> + 7f8e: 63 cf rjmp .-314 ; 0x7e56 <main+0x56> + +00007f90 <putch>: + } +} + +void putch(char ch) { + 7f90: 98 2f mov r25, r24 +#ifndef SOFT_UART + while (!(UCSR0A & _BV(UDRE0))); + 7f92: 80 91 c0 00 lds r24, 0x00C0 + 7f96: 85 ff sbrs r24, 5 + 7f98: fc cf rjmp .-8 ; 0x7f92 <putch+0x2> + UDR0 = ch; + 7f9a: 90 93 c6 00 sts 0x00C6, r25 + [uartBit] "I" (UART_TX_BIT) + : + "r25" + ); +#endif +} + 7f9e: 08 95 ret + +00007fa0 <getch>: + return getch(); +} + +// Watchdog functions. These are only safe with interrupts turned off. +void watchdogReset() { + __asm__ __volatile__ ( + 7fa0: a8 95 wdr + [uartBit] "I" (UART_RX_BIT) + : + "r25" +); +#else + while(!(UCSR0A & _BV(RXC0))); + 7fa2: 80 91 c0 00 lds r24, 0x00C0 + 7fa6: 87 ff sbrs r24, 7 + 7fa8: fc cf rjmp .-8 ; 0x7fa2 <getch+0x2> + ch = UDR0; + 7faa: 80 91 c6 00 lds r24, 0x00C6 +#ifdef LED_DATA_FLASH + LED_PIN |= _BV(LED); +#endif + + return ch; +} + 7fae: 08 95 ret + +00007fb0 <getLen>: + } while (--count); +} +#endif + +uint8_t getLen() { + getch(); + 7fb0: f7 df rcall .-18 ; 0x7fa0 <getch> + length = getch(); + 7fb2: f6 df rcall .-20 ; 0x7fa0 <getch> + 7fb4: 80 93 02 02 sts 0x0202, r24 + return getch(); +} + 7fb8: f3 cf rjmp .-26 ; 0x7fa0 <getch> + +00007fba <watchdogConfig>: + "wdr\n" + ); +} + +void watchdogConfig(uint8_t x) { + WDTCSR = _BV(WDCE) | _BV(WDE); + 7fba: e0 e6 ldi r30, 0x60 ; 96 + 7fbc: f0 e0 ldi r31, 0x00 ; 0 + 7fbe: 98 e1 ldi r25, 0x18 ; 24 + 7fc0: 90 83 st Z, r25 + WDTCSR = x; + 7fc2: 80 83 st Z, r24 +} + 7fc4: 08 95 ret + +00007fc6 <appStart>: + +void appStart() { + watchdogConfig(WATCHDOG_OFF); + 7fc6: 80 e0 ldi r24, 0x00 ; 0 + 7fc8: f8 df rcall .-16 ; 0x7fba <watchdogConfig> + __asm__ __volatile__ ( + 7fca: ee 27 eor r30, r30 + 7fcc: ff 27 eor r31, r31 + 7fce: 09 94 ijmp + +00007fd0 <verifySpace>: + do getch(); while (--count); + verifySpace(); +} + +void verifySpace() { + if (getch() != CRC_EOP) appStart(); + 7fd0: e7 df rcall .-50 ; 0x7fa0 <getch> + 7fd2: 80 32 cpi r24, 0x20 ; 32 + 7fd4: 09 f0 breq .+2 ; 0x7fd8 <verifySpace+0x8> + 7fd6: f7 df rcall .-18 ; 0x7fc6 <appStart> + putch(STK_INSYNC); + 7fd8: 84 e1 ldi r24, 0x14 ; 20 +} + 7fda: da cf rjmp .-76 ; 0x7f90 <putch> + ::[count] "M" (UART_B_VALUE) + ); +} +#endif + +void getNch(uint8_t count) { + 7fdc: 1f 93 push r17 + 7fde: 18 2f mov r17, r24 + +00007fe0 <getNch>: + do getch(); while (--count); + 7fe0: df df rcall .-66 ; 0x7fa0 <getch> + 7fe2: 11 50 subi r17, 0x01 ; 1 + 7fe4: e9 f7 brne .-6 ; 0x7fe0 <getNch> + verifySpace(); + 7fe6: f4 df rcall .-24 ; 0x7fd0 <verifySpace> +} + 7fe8: 1f 91 pop r17 + 7fea: 08 95 ret diff --git a/test/ardmake/hardware/bootloaders/optiboot/optiboot_diecimila.hex b/test/ardmake/hardware/bootloaders/optiboot/optiboot_diecimila.hex new file mode 100644 index 0000000..1e93414 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/optiboot/optiboot_diecimila.hex @@ -0,0 +1,33 @@ +:103E000085E08093810082E08093C00088E1809308
+:103E1000C10086E08093C20080E18093C40084B733
+:103E200014BE81FFD0D08DE0C8D0259A86E020E373
+:103E30003CEF91E0309385002093840096BBB09BCB
+:103E4000FECF1D9AA8958150A9F7DD24D394A5E053
+:103E5000EA2EF1E1FF2EA4D0813421F481E0BED01E
+:103E600083E024C0823411F484E103C0853419F462
+:103E700085E0B4D08AC08535A1F492D0082F10E037
+:103E800010930102009300028BD090E0982F8827B6
+:103E9000802B912B880F991F909301028093000231
+:103EA00073C0863529F484E099D080E071D06DC06C
+:103EB000843609F043C07CD0E0910002F091010209
+:103EC00083E080935700E895C0E0D1E069D0899302
+:103ED000809102028150809302028823B9F778D042
+:103EE00007B600FCFDCF4091000250910102A0E016
+:103EF000B1E02C9130E011968C91119790E0982FC1
+:103F00008827822B932B1296FA010C01D09257002E
+:103F1000E89511244E5F5F4FF1E0A038BF0749F7E5
+:103F2000E0910002F0910102E0925700E89507B697
+:103F300000FCFDCFF0925700E89527C08437B9F414
+:103F400037D046D0E0910002F09101023196F09313
+:103F50000102E09300023197E4918E2F19D08091F5
+:103F60000202815080930202882361F70EC08537D8
+:103F700039F42ED08EE10CD084E90AD086E096CFB9
+:103F8000813511F488E019D023D080E101D063CFCE
+:103F9000982F8091C00085FFFCCF9093C6000895B4
+:103FA000A8958091C00087FFFCCF8091C60008953E
+:103FB000F7DFF6DF80930202F3CFE0E6F0E098E16E
+:103FC00090838083089580E0F8DFEE27FF2709942F
+:103FD000E7DF803209F0F7DF84E1DACF1F93182F93
+:0C3FE000DFDF1150E9F7F4DF1F910895B6
+:0400000300003E00BB
+:00000001FF
diff --git a/test/ardmake/hardware/bootloaders/optiboot/optiboot_diecimila.lst b/test/ardmake/hardware/bootloaders/optiboot/optiboot_diecimila.lst new file mode 100644 index 0000000..1121893 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/optiboot/optiboot_diecimila.lst @@ -0,0 +1,520 @@ + +optiboot_diecimila.elf: file format elf32-avr + +Sections: +Idx Name Size VMA LMA File off Algn + 0 .text 000001ec 00003e00 00003e00 00000054 2**1 + CONTENTS, ALLOC, LOAD, READONLY, CODE + 1 .debug_aranges 00000028 00000000 00000000 00000240 2**0 + CONTENTS, READONLY, DEBUGGING + 2 .debug_pubnames 0000006a 00000000 00000000 00000268 2**0 + CONTENTS, READONLY, DEBUGGING + 3 .debug_info 00000269 00000000 00000000 000002d2 2**0 + CONTENTS, READONLY, DEBUGGING + 4 .debug_abbrev 00000196 00000000 00000000 0000053b 2**0 + CONTENTS, READONLY, DEBUGGING + 5 .debug_line 000003d3 00000000 00000000 000006d1 2**0 + CONTENTS, READONLY, DEBUGGING + 6 .debug_frame 00000090 00000000 00000000 00000aa4 2**2 + CONTENTS, READONLY, DEBUGGING + 7 .debug_str 00000135 00000000 00000000 00000b34 2**0 + CONTENTS, READONLY, DEBUGGING + 8 .debug_loc 000001d1 00000000 00000000 00000c69 2**0 + CONTENTS, READONLY, DEBUGGING + 9 .debug_ranges 00000068 00000000 00000000 00000e3a 2**0 + CONTENTS, READONLY, DEBUGGING + +Disassembly of section .text: + +00003e00 <main>: +#ifdef VIRTUAL_BOOT_PARTITION +#define rstVect (*(uint16_t*)(0x204)) +#define wdtVect (*(uint16_t*)(0x206)) +#endif +/* main program starts here */ +int main(void) { + 3e00: 85 e0 ldi r24, 0x05 ; 5 + 3e02: 80 93 81 00 sts 0x0081, r24 +#if LED_START_FLASHES > 0 + // Set up Timer 1 for timeout counter + TCCR1B = _BV(CS12) | _BV(CS10); // div 1024 +#endif +#ifndef SOFT_UART + UCSR0A = _BV(U2X0); //Double speed mode USART0 + 3e06: 82 e0 ldi r24, 0x02 ; 2 + 3e08: 80 93 c0 00 sts 0x00C0, r24 + UCSR0B = _BV(RXEN0) | _BV(TXEN0); + 3e0c: 88 e1 ldi r24, 0x18 ; 24 + 3e0e: 80 93 c1 00 sts 0x00C1, r24 + UCSR0C = _BV(UCSZ00) | _BV(UCSZ01); + 3e12: 86 e0 ldi r24, 0x06 ; 6 + 3e14: 80 93 c2 00 sts 0x00C2, r24 + UBRR0L = (uint8_t)( (F_CPU + BAUD_RATE * 4L) / (BAUD_RATE * 8L) - 1 ); + 3e18: 80 e1 ldi r24, 0x10 ; 16 + 3e1a: 80 93 c4 00 sts 0x00C4, r24 +#endif + + // Adaboot no-wait mod + ch = MCUSR; + 3e1e: 84 b7 in r24, 0x34 ; 52 + MCUSR = 0; + 3e20: 14 be out 0x34, r1 ; 52 + if (!(ch & _BV(EXTRF))) appStart(); + 3e22: 81 ff sbrs r24, 1 + 3e24: d0 d0 rcall .+416 ; 0x3fc6 <appStart> + + // Set up watchdog to trigger after 500ms + watchdogConfig(WATCHDOG_500MS); + 3e26: 8d e0 ldi r24, 0x0D ; 13 + 3e28: c8 d0 rcall .+400 ; 0x3fba <watchdogConfig> + + /* Set LED pin as output */ + LED_DDR |= _BV(LED); + 3e2a: 25 9a sbi 0x04, 5 ; 4 + 3e2c: 86 e0 ldi r24, 0x06 ; 6 +} + +#if LED_START_FLASHES > 0 +void flash_led(uint8_t count) { + do { + TCNT1 = -(F_CPU/(1024*16)); + 3e2e: 20 e3 ldi r18, 0x30 ; 48 + 3e30: 3c ef ldi r19, 0xFC ; 252 + TIFR1 = _BV(TOV1); + 3e32: 91 e0 ldi r25, 0x01 ; 1 +} + +#if LED_START_FLASHES > 0 +void flash_led(uint8_t count) { + do { + TCNT1 = -(F_CPU/(1024*16)); + 3e34: 30 93 85 00 sts 0x0085, r19 + 3e38: 20 93 84 00 sts 0x0084, r18 + TIFR1 = _BV(TOV1); + 3e3c: 96 bb out 0x16, r25 ; 22 + while(!(TIFR1 & _BV(TOV1))); + 3e3e: b0 9b sbis 0x16, 0 ; 22 + 3e40: fe cf rjmp .-4 ; 0x3e3e <main+0x3e> + LED_PIN |= _BV(LED); + 3e42: 1d 9a sbi 0x03, 5 ; 3 + return getch(); +} + +// Watchdog functions. These are only safe with interrupts turned off. +void watchdogReset() { + __asm__ __volatile__ ( + 3e44: a8 95 wdr + TCNT1 = -(F_CPU/(1024*16)); + TIFR1 = _BV(TOV1); + while(!(TIFR1 & _BV(TOV1))); + LED_PIN |= _BV(LED); + watchdogReset(); + } while (--count); + 3e46: 81 50 subi r24, 0x01 ; 1 + 3e48: a9 f7 brne .-22 ; 0x3e34 <main+0x34> + /* get character from UART */ + ch = getch(); + + if(ch == STK_GET_PARAMETER) { + // GET PARAMETER returns a generic 0x03 reply - enough to keep Avrdude happy + getNch(1); + 3e4a: dd 24 eor r13, r13 + 3e4c: d3 94 inc r13 + boot_page_fill((uint16_t)(void*)addrPtr,a); + addrPtr += 2; + } while (--ch); + + // Write from programming buffer + boot_page_write((uint16_t)(void*)address); + 3e4e: a5 e0 ldi r26, 0x05 ; 5 + 3e50: ea 2e mov r14, r26 + boot_spm_busy_wait(); + +#if defined(RWWSRE) + // Reenable read access to flash + boot_rww_enable(); + 3e52: f1 e1 ldi r31, 0x11 ; 17 + 3e54: ff 2e mov r15, r31 +#endif + + /* Forever loop */ + for (;;) { + /* get character from UART */ + ch = getch(); + 3e56: a4 d0 rcall .+328 ; 0x3fa0 <getch> + + if(ch == STK_GET_PARAMETER) { + 3e58: 81 34 cpi r24, 0x41 ; 65 + 3e5a: 21 f4 brne .+8 ; 0x3e64 <main+0x64> + // GET PARAMETER returns a generic 0x03 reply - enough to keep Avrdude happy + getNch(1); + 3e5c: 81 e0 ldi r24, 0x01 ; 1 + 3e5e: be d0 rcall .+380 ; 0x3fdc <verifySpace+0xc> + putch(0x03); + 3e60: 83 e0 ldi r24, 0x03 ; 3 + 3e62: 24 c0 rjmp .+72 ; 0x3eac <main+0xac> + } + else if(ch == STK_SET_DEVICE) { + 3e64: 82 34 cpi r24, 0x42 ; 66 + 3e66: 11 f4 brne .+4 ; 0x3e6c <main+0x6c> + // SET DEVICE is ignored + getNch(20); + 3e68: 84 e1 ldi r24, 0x14 ; 20 + 3e6a: 03 c0 rjmp .+6 ; 0x3e72 <main+0x72> + } + else if(ch == STK_SET_DEVICE_EXT) { + 3e6c: 85 34 cpi r24, 0x45 ; 69 + 3e6e: 19 f4 brne .+6 ; 0x3e76 <main+0x76> + // SET DEVICE EXT is ignored + getNch(5); + 3e70: 85 e0 ldi r24, 0x05 ; 5 + 3e72: b4 d0 rcall .+360 ; 0x3fdc <verifySpace+0xc> + 3e74: 8a c0 rjmp .+276 ; 0x3f8a <main+0x18a> + } + else if(ch == STK_LOAD_ADDRESS) { + 3e76: 85 35 cpi r24, 0x55 ; 85 + 3e78: a1 f4 brne .+40 ; 0x3ea2 <main+0xa2> + // LOAD ADDRESS + address = getch(); + 3e7a: 92 d0 rcall .+292 ; 0x3fa0 <getch> + 3e7c: 08 2f mov r16, r24 + 3e7e: 10 e0 ldi r17, 0x00 ; 0 + 3e80: 10 93 01 02 sts 0x0201, r17 + 3e84: 00 93 00 02 sts 0x0200, r16 + address = (address & 0xff) | (getch() << 8); + 3e88: 8b d0 rcall .+278 ; 0x3fa0 <getch> + 3e8a: 90 e0 ldi r25, 0x00 ; 0 + 3e8c: 98 2f mov r25, r24 + 3e8e: 88 27 eor r24, r24 + 3e90: 80 2b or r24, r16 + 3e92: 91 2b or r25, r17 + address += address; // Convert from word address to byte address + 3e94: 88 0f add r24, r24 + 3e96: 99 1f adc r25, r25 + 3e98: 90 93 01 02 sts 0x0201, r25 + 3e9c: 80 93 00 02 sts 0x0200, r24 + 3ea0: 73 c0 rjmp .+230 ; 0x3f88 <main+0x188> + verifySpace(); + } + else if(ch == STK_UNIVERSAL) { + 3ea2: 86 35 cpi r24, 0x56 ; 86 + 3ea4: 29 f4 brne .+10 ; 0x3eb0 <main+0xb0> + // UNIVERSAL command is ignored + getNch(4); + 3ea6: 84 e0 ldi r24, 0x04 ; 4 + 3ea8: 99 d0 rcall .+306 ; 0x3fdc <verifySpace+0xc> + putch(0x00); + 3eaa: 80 e0 ldi r24, 0x00 ; 0 + 3eac: 71 d0 rcall .+226 ; 0x3f90 <putch> + 3eae: 6d c0 rjmp .+218 ; 0x3f8a <main+0x18a> + } + /* Write memory, length is big endian and is in bytes */ + else if(ch == STK_PROG_PAGE) { + 3eb0: 84 36 cpi r24, 0x64 ; 100 + 3eb2: 09 f0 breq .+2 ; 0x3eb6 <main+0xb6> + 3eb4: 43 c0 rjmp .+134 ; 0x3f3c <main+0x13c> + // PROGRAM PAGE - we support flash programming only, not EEPROM + uint8_t *bufPtr; + uint16_t addrPtr; + + getLen(); + 3eb6: 7c d0 rcall .+248 ; 0x3fb0 <getLen> + + // Immediately start page erase - this will 4.5ms + boot_page_erase((uint16_t)(void*)address); + 3eb8: e0 91 00 02 lds r30, 0x0200 + 3ebc: f0 91 01 02 lds r31, 0x0201 + 3ec0: 83 e0 ldi r24, 0x03 ; 3 + 3ec2: 80 93 57 00 sts 0x0057, r24 + 3ec6: e8 95 spm + 3ec8: c0 e0 ldi r28, 0x00 ; 0 + 3eca: d1 e0 ldi r29, 0x01 ; 1 + + // While that is going on, read in page contents + bufPtr = buff; + do *bufPtr++ = getch(); + 3ecc: 69 d0 rcall .+210 ; 0x3fa0 <getch> + 3ece: 89 93 st Y+, r24 + while (--length); + 3ed0: 80 91 02 02 lds r24, 0x0202 + 3ed4: 81 50 subi r24, 0x01 ; 1 + 3ed6: 80 93 02 02 sts 0x0202, r24 + 3eda: 88 23 and r24, r24 + 3edc: b9 f7 brne .-18 ; 0x3ecc <main+0xcc> + + // Read command terminator, start reply + verifySpace(); + 3ede: 78 d0 rcall .+240 ; 0x3fd0 <verifySpace> + + // If only a partial page is to be programmed, the erase might not be complete. + // So check that here + boot_spm_busy_wait(); + 3ee0: 07 b6 in r0, 0x37 ; 55 + 3ee2: 00 fc sbrc r0, 0 + 3ee4: fd cf rjmp .-6 ; 0x3ee0 <main+0xe0> + } +#endif + + // Copy buffer into programming buffer + bufPtr = buff; + addrPtr = (uint16_t)(void*)address; + 3ee6: 40 91 00 02 lds r20, 0x0200 + 3eea: 50 91 01 02 lds r21, 0x0201 + 3eee: a0 e0 ldi r26, 0x00 ; 0 + 3ef0: b1 e0 ldi r27, 0x01 ; 1 + ch = SPM_PAGESIZE / 2; + do { + uint16_t a; + a = *bufPtr++; + 3ef2: 2c 91 ld r18, X + 3ef4: 30 e0 ldi r19, 0x00 ; 0 + a |= (*bufPtr++) << 8; + 3ef6: 11 96 adiw r26, 0x01 ; 1 + 3ef8: 8c 91 ld r24, X + 3efa: 11 97 sbiw r26, 0x01 ; 1 + 3efc: 90 e0 ldi r25, 0x00 ; 0 + 3efe: 98 2f mov r25, r24 + 3f00: 88 27 eor r24, r24 + 3f02: 82 2b or r24, r18 + 3f04: 93 2b or r25, r19 +#ifdef VIRTUAL_BOOT_PARTITION +#define rstVect (*(uint16_t*)(0x204)) +#define wdtVect (*(uint16_t*)(0x206)) +#endif +/* main program starts here */ +int main(void) { + 3f06: 12 96 adiw r26, 0x02 ; 2 + ch = SPM_PAGESIZE / 2; + do { + uint16_t a; + a = *bufPtr++; + a |= (*bufPtr++) << 8; + boot_page_fill((uint16_t)(void*)addrPtr,a); + 3f08: fa 01 movw r30, r20 + 3f0a: 0c 01 movw r0, r24 + 3f0c: d0 92 57 00 sts 0x0057, r13 + 3f10: e8 95 spm + 3f12: 11 24 eor r1, r1 + addrPtr += 2; + 3f14: 4e 5f subi r20, 0xFE ; 254 + 3f16: 5f 4f sbci r21, 0xFF ; 255 + } while (--ch); + 3f18: f1 e0 ldi r31, 0x01 ; 1 + 3f1a: a0 38 cpi r26, 0x80 ; 128 + 3f1c: bf 07 cpc r27, r31 + 3f1e: 49 f7 brne .-46 ; 0x3ef2 <main+0xf2> + + // Write from programming buffer + boot_page_write((uint16_t)(void*)address); + 3f20: e0 91 00 02 lds r30, 0x0200 + 3f24: f0 91 01 02 lds r31, 0x0201 + 3f28: e0 92 57 00 sts 0x0057, r14 + 3f2c: e8 95 spm + boot_spm_busy_wait(); + 3f2e: 07 b6 in r0, 0x37 ; 55 + 3f30: 00 fc sbrc r0, 0 + 3f32: fd cf rjmp .-6 ; 0x3f2e <main+0x12e> + +#if defined(RWWSRE) + // Reenable read access to flash + boot_rww_enable(); + 3f34: f0 92 57 00 sts 0x0057, r15 + 3f38: e8 95 spm + 3f3a: 27 c0 rjmp .+78 ; 0x3f8a <main+0x18a> +#endif + + } + /* Read memory block mode, length is big endian. */ + else if(ch == STK_READ_PAGE) { + 3f3c: 84 37 cpi r24, 0x74 ; 116 + 3f3e: b9 f4 brne .+46 ; 0x3f6e <main+0x16e> + // READ PAGE - we only read flash + getLen(); + 3f40: 37 d0 rcall .+110 ; 0x3fb0 <getLen> + verifySpace(); + 3f42: 46 d0 rcall .+140 ; 0x3fd0 <verifySpace> + else ch = pgm_read_byte_near(address); + address++; + putch(ch); + } while (--length); +#else + do putch(pgm_read_byte_near(address++)); + 3f44: e0 91 00 02 lds r30, 0x0200 + 3f48: f0 91 01 02 lds r31, 0x0201 + 3f4c: 31 96 adiw r30, 0x01 ; 1 + 3f4e: f0 93 01 02 sts 0x0201, r31 + 3f52: e0 93 00 02 sts 0x0200, r30 + 3f56: 31 97 sbiw r30, 0x01 ; 1 + 3f58: e4 91 lpm r30, Z+ + 3f5a: 8e 2f mov r24, r30 + 3f5c: 19 d0 rcall .+50 ; 0x3f90 <putch> + while (--length); + 3f5e: 80 91 02 02 lds r24, 0x0202 + 3f62: 81 50 subi r24, 0x01 ; 1 + 3f64: 80 93 02 02 sts 0x0202, r24 + 3f68: 88 23 and r24, r24 + 3f6a: 61 f7 brne .-40 ; 0x3f44 <main+0x144> + 3f6c: 0e c0 rjmp .+28 ; 0x3f8a <main+0x18a> +#endif + } + + /* Get device signature bytes */ + else if(ch == STK_READ_SIGN) { + 3f6e: 85 37 cpi r24, 0x75 ; 117 + 3f70: 39 f4 brne .+14 ; 0x3f80 <main+0x180> + // READ SIGN - return what Avrdude wants to hear + verifySpace(); + 3f72: 2e d0 rcall .+92 ; 0x3fd0 <verifySpace> + putch(SIGNATURE_0); + 3f74: 8e e1 ldi r24, 0x1E ; 30 + 3f76: 0c d0 rcall .+24 ; 0x3f90 <putch> + putch(SIGNATURE_1); + 3f78: 84 e9 ldi r24, 0x94 ; 148 + 3f7a: 0a d0 rcall .+20 ; 0x3f90 <putch> + putch(SIGNATURE_2); + 3f7c: 86 e0 ldi r24, 0x06 ; 6 + 3f7e: 96 cf rjmp .-212 ; 0x3eac <main+0xac> + } + else if (ch == 'Q') { + 3f80: 81 35 cpi r24, 0x51 ; 81 + 3f82: 11 f4 brne .+4 ; 0x3f88 <main+0x188> + // Adaboot no-wait mod + watchdogConfig(WATCHDOG_16MS); + 3f84: 88 e0 ldi r24, 0x08 ; 8 + 3f86: 19 d0 rcall .+50 ; 0x3fba <watchdogConfig> + verifySpace(); + } + else { + // This covers the response to commands like STK_ENTER_PROGMODE + verifySpace(); + 3f88: 23 d0 rcall .+70 ; 0x3fd0 <verifySpace> + } + putch(STK_OK); + 3f8a: 80 e1 ldi r24, 0x10 ; 16 + 3f8c: 01 d0 rcall .+2 ; 0x3f90 <putch> + 3f8e: 63 cf rjmp .-314 ; 0x3e56 <main+0x56> + +00003f90 <putch>: + } +} + +void putch(char ch) { + 3f90: 98 2f mov r25, r24 +#ifndef SOFT_UART + while (!(UCSR0A & _BV(UDRE0))); + 3f92: 80 91 c0 00 lds r24, 0x00C0 + 3f96: 85 ff sbrs r24, 5 + 3f98: fc cf rjmp .-8 ; 0x3f92 <putch+0x2> + UDR0 = ch; + 3f9a: 90 93 c6 00 sts 0x00C6, r25 + [uartBit] "I" (UART_TX_BIT) + : + "r25" + ); +#endif +} + 3f9e: 08 95 ret + +00003fa0 <getch>: + return getch(); +} + +// Watchdog functions. These are only safe with interrupts turned off. +void watchdogReset() { + __asm__ __volatile__ ( + 3fa0: a8 95 wdr + [uartBit] "I" (UART_RX_BIT) + : + "r25" +); +#else + while(!(UCSR0A & _BV(RXC0))); + 3fa2: 80 91 c0 00 lds r24, 0x00C0 + 3fa6: 87 ff sbrs r24, 7 + 3fa8: fc cf rjmp .-8 ; 0x3fa2 <getch+0x2> + ch = UDR0; + 3faa: 80 91 c6 00 lds r24, 0x00C6 +#ifdef LED_DATA_FLASH + LED_PIN |= _BV(LED); +#endif + + return ch; +} + 3fae: 08 95 ret + +00003fb0 <getLen>: + } while (--count); +} +#endif + +uint8_t getLen() { + getch(); + 3fb0: f7 df rcall .-18 ; 0x3fa0 <getch> + length = getch(); + 3fb2: f6 df rcall .-20 ; 0x3fa0 <getch> + 3fb4: 80 93 02 02 sts 0x0202, r24 + return getch(); +} + 3fb8: f3 cf rjmp .-26 ; 0x3fa0 <getch> + +00003fba <watchdogConfig>: + "wdr\n" + ); +} + +void watchdogConfig(uint8_t x) { + WDTCSR = _BV(WDCE) | _BV(WDE); + 3fba: e0 e6 ldi r30, 0x60 ; 96 + 3fbc: f0 e0 ldi r31, 0x00 ; 0 + 3fbe: 98 e1 ldi r25, 0x18 ; 24 + 3fc0: 90 83 st Z, r25 + WDTCSR = x; + 3fc2: 80 83 st Z, r24 +} + 3fc4: 08 95 ret + +00003fc6 <appStart>: + +void appStart() { + watchdogConfig(WATCHDOG_OFF); + 3fc6: 80 e0 ldi r24, 0x00 ; 0 + 3fc8: f8 df rcall .-16 ; 0x3fba <watchdogConfig> + __asm__ __volatile__ ( + 3fca: ee 27 eor r30, r30 + 3fcc: ff 27 eor r31, r31 + 3fce: 09 94 ijmp + +00003fd0 <verifySpace>: + do getch(); while (--count); + verifySpace(); +} + +void verifySpace() { + if (getch() != CRC_EOP) appStart(); + 3fd0: e7 df rcall .-50 ; 0x3fa0 <getch> + 3fd2: 80 32 cpi r24, 0x20 ; 32 + 3fd4: 09 f0 breq .+2 ; 0x3fd8 <verifySpace+0x8> + 3fd6: f7 df rcall .-18 ; 0x3fc6 <appStart> + putch(STK_INSYNC); + 3fd8: 84 e1 ldi r24, 0x14 ; 20 +} + 3fda: da cf rjmp .-76 ; 0x3f90 <putch> + ::[count] "M" (UART_B_VALUE) + ); +} +#endif + +void getNch(uint8_t count) { + 3fdc: 1f 93 push r17 + 3fde: 18 2f mov r17, r24 + +00003fe0 <getNch>: + do getch(); while (--count); + 3fe0: df df rcall .-66 ; 0x3fa0 <getch> + 3fe2: 11 50 subi r17, 0x01 ; 1 + 3fe4: e9 f7 brne .-6 ; 0x3fe0 <getNch> + verifySpace(); + 3fe6: f4 df rcall .-24 ; 0x3fd0 <verifySpace> +} + 3fe8: 1f 91 pop r17 + 3fea: 08 95 ret diff --git a/test/ardmake/hardware/bootloaders/optiboot/optiboot_lilypad.hex b/test/ardmake/hardware/bootloaders/optiboot/optiboot_lilypad.hex new file mode 100644 index 0000000..9d31a7a --- /dev/null +++ b/test/ardmake/hardware/bootloaders/optiboot/optiboot_lilypad.hex @@ -0,0 +1,34 @@ +:103E000085E08093810084B714BE81FFE4D08DE00B
+:103E1000DCD0259A519A86E028E13EEF91E030937C
+:103E200085002093840096BBB09BFECF1D9AA89579
+:103E30008150A9F7DD24D394A5E0EA2EF1E1FF2E0D
+:103E4000ABD0813421F481E0D1D083E024C082342E
+:103E500011F484E103C0853419F485E0C7D08AC029
+:103E60008535A1F499D0082F10E01093010200933A
+:103E7000000292D090E0982F8827802B912B880FFA
+:103E8000991F909301028093000273C0863529F434
+:103E900084E0ACD080E071D06DC0843609F043C0BE
+:103EA0008FD0E0910002F091010283E080935700EF
+:103EB000E895C0E0D1E070D08993809102028150F2
+:103EC000809302028823B9F78BD007B600FCFDCFA0
+:103ED0004091000250910102A0E0B1E02C9130E04D
+:103EE00011968C91119790E0982F8827822B932B15
+:103EF0001296FA010C01D0925700E89511244E5FFA
+:103F00005F4FF1E0A038BF0749F7E0910002F09160
+:103F10000102E0925700E89507B600FCFDCFF09251
+:103F20005700E89527C08437B9F44AD059D0E091BA
+:103F30000002F09101023196F0930102E093000239
+:103F40003197E4918E2F19D0809102028150809395
+:103F50000202882361F70EC0853739F441D08EE123
+:103F60000CD084E90AD086E096CF813511F488E040
+:103F70002CD036D080E101D063CF2AE030E08095AC
+:103F8000089410F4599802C0599A000015D014D022
+:103F900086952A95B1F70895A89529E030E04899CB
+:103FA000FECF0AD009D008D08894489908942A9561
+:103FB00011F08795F7CF089598E09A95F1F7089555
+:103FC000EBDFEADF80930202E7CFE0E6F0E098E182
+:103FD00090838083089580E0F8DFEE27FF2709941F
+:103FE000DBDF803209F0F7DF84E1C7CF1F93182FA2
+:0C3FF000D3DF1150E9F7F4DF1F910895B2
+:0400000300003E00BB
+:00000001FF
diff --git a/test/ardmake/hardware/bootloaders/optiboot/optiboot_lilypad.lst b/test/ardmake/hardware/bootloaders/optiboot/optiboot_lilypad.lst new file mode 100644 index 0000000..0e46bd1 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/optiboot/optiboot_lilypad.lst @@ -0,0 +1,533 @@ + +optiboot_lilypad.elf: file format elf32-avr + +Sections: +Idx Name Size VMA LMA File off Algn + 0 .text 000001fc 00003e00 00003e00 00000054 2**1 + CONTENTS, ALLOC, LOAD, READONLY, CODE + 1 .debug_aranges 00000028 00000000 00000000 00000250 2**0 + CONTENTS, READONLY, DEBUGGING + 2 .debug_pubnames 00000078 00000000 00000000 00000278 2**0 + CONTENTS, READONLY, DEBUGGING + 3 .debug_info 00000277 00000000 00000000 000002f0 2**0 + CONTENTS, READONLY, DEBUGGING + 4 .debug_abbrev 00000194 00000000 00000000 00000567 2**0 + CONTENTS, READONLY, DEBUGGING + 5 .debug_line 000003bb 00000000 00000000 000006fb 2**0 + CONTENTS, READONLY, DEBUGGING + 6 .debug_frame 000000a0 00000000 00000000 00000ab8 2**2 + CONTENTS, READONLY, DEBUGGING + 7 .debug_str 0000013f 00000000 00000000 00000b58 2**0 + CONTENTS, READONLY, DEBUGGING + 8 .debug_loc 000001a0 00000000 00000000 00000c97 2**0 + CONTENTS, READONLY, DEBUGGING + 9 .debug_ranges 00000070 00000000 00000000 00000e37 2**0 + CONTENTS, READONLY, DEBUGGING + +Disassembly of section .text: + +00003e00 <main>: +#ifdef VIRTUAL_BOOT_PARTITION +#define rstVect (*(uint16_t*)(0x204)) +#define wdtVect (*(uint16_t*)(0x206)) +#endif +/* main program starts here */ +int main(void) { + 3e00: 85 e0 ldi r24, 0x05 ; 5 + 3e02: 80 93 81 00 sts 0x0081, r24 + UCSR0C = _BV(UCSZ00) | _BV(UCSZ01); + UBRR0L = (uint8_t)( (F_CPU + BAUD_RATE * 4L) / (BAUD_RATE * 8L) - 1 ); +#endif + + // Adaboot no-wait mod + ch = MCUSR; + 3e06: 84 b7 in r24, 0x34 ; 52 + MCUSR = 0; + 3e08: 14 be out 0x34, r1 ; 52 + if (!(ch & _BV(EXTRF))) appStart(); + 3e0a: 81 ff sbrs r24, 1 + 3e0c: e4 d0 rcall .+456 ; 0x3fd6 <appStart> + + // Set up watchdog to trigger after 500ms + watchdogConfig(WATCHDOG_500MS); + 3e0e: 8d e0 ldi r24, 0x0D ; 13 + 3e10: dc d0 rcall .+440 ; 0x3fca <watchdogConfig> + + /* Set LED pin as output */ + LED_DDR |= _BV(LED); + 3e12: 25 9a sbi 0x04, 5 ; 4 + +#ifdef SOFT_UART + /* Set TX pin as output */ + UART_DDR |= _BV(UART_TX_BIT); + 3e14: 51 9a sbi 0x0a, 1 ; 10 + 3e16: 86 e0 ldi r24, 0x06 ; 6 +} + +#if LED_START_FLASHES > 0 +void flash_led(uint8_t count) { + do { + TCNT1 = -(F_CPU/(1024*16)); + 3e18: 28 e1 ldi r18, 0x18 ; 24 + 3e1a: 3e ef ldi r19, 0xFE ; 254 + TIFR1 = _BV(TOV1); + 3e1c: 91 e0 ldi r25, 0x01 ; 1 +} + +#if LED_START_FLASHES > 0 +void flash_led(uint8_t count) { + do { + TCNT1 = -(F_CPU/(1024*16)); + 3e1e: 30 93 85 00 sts 0x0085, r19 + 3e22: 20 93 84 00 sts 0x0084, r18 + TIFR1 = _BV(TOV1); + 3e26: 96 bb out 0x16, r25 ; 22 + while(!(TIFR1 & _BV(TOV1))); + 3e28: b0 9b sbis 0x16, 0 ; 22 + 3e2a: fe cf rjmp .-4 ; 0x3e28 <main+0x28> + LED_PIN |= _BV(LED); + 3e2c: 1d 9a sbi 0x03, 5 ; 3 + return getch(); +} + +// Watchdog functions. These are only safe with interrupts turned off. +void watchdogReset() { + __asm__ __volatile__ ( + 3e2e: a8 95 wdr + TCNT1 = -(F_CPU/(1024*16)); + TIFR1 = _BV(TOV1); + while(!(TIFR1 & _BV(TOV1))); + LED_PIN |= _BV(LED); + watchdogReset(); + } while (--count); + 3e30: 81 50 subi r24, 0x01 ; 1 + 3e32: a9 f7 brne .-22 ; 0x3e1e <main+0x1e> + /* get character from UART */ + ch = getch(); + + if(ch == STK_GET_PARAMETER) { + // GET PARAMETER returns a generic 0x03 reply - enough to keep Avrdude happy + getNch(1); + 3e34: dd 24 eor r13, r13 + 3e36: d3 94 inc r13 + boot_page_fill((uint16_t)(void*)addrPtr,a); + addrPtr += 2; + } while (--ch); + + // Write from programming buffer + boot_page_write((uint16_t)(void*)address); + 3e38: a5 e0 ldi r26, 0x05 ; 5 + 3e3a: ea 2e mov r14, r26 + boot_spm_busy_wait(); + +#if defined(RWWSRE) + // Reenable read access to flash + boot_rww_enable(); + 3e3c: f1 e1 ldi r31, 0x11 ; 17 + 3e3e: ff 2e mov r15, r31 +#endif + + /* Forever loop */ + for (;;) { + /* get character from UART */ + ch = getch(); + 3e40: ab d0 rcall .+342 ; 0x3f98 <getch> + + if(ch == STK_GET_PARAMETER) { + 3e42: 81 34 cpi r24, 0x41 ; 65 + 3e44: 21 f4 brne .+8 ; 0x3e4e <main+0x4e> + // GET PARAMETER returns a generic 0x03 reply - enough to keep Avrdude happy + getNch(1); + 3e46: 81 e0 ldi r24, 0x01 ; 1 + 3e48: d1 d0 rcall .+418 ; 0x3fec <verifySpace+0xc> + putch(0x03); + 3e4a: 83 e0 ldi r24, 0x03 ; 3 + 3e4c: 24 c0 rjmp .+72 ; 0x3e96 <main+0x96> + } + else if(ch == STK_SET_DEVICE) { + 3e4e: 82 34 cpi r24, 0x42 ; 66 + 3e50: 11 f4 brne .+4 ; 0x3e56 <main+0x56> + // SET DEVICE is ignored + getNch(20); + 3e52: 84 e1 ldi r24, 0x14 ; 20 + 3e54: 03 c0 rjmp .+6 ; 0x3e5c <main+0x5c> + } + else if(ch == STK_SET_DEVICE_EXT) { + 3e56: 85 34 cpi r24, 0x45 ; 69 + 3e58: 19 f4 brne .+6 ; 0x3e60 <main+0x60> + // SET DEVICE EXT is ignored + getNch(5); + 3e5a: 85 e0 ldi r24, 0x05 ; 5 + 3e5c: c7 d0 rcall .+398 ; 0x3fec <verifySpace+0xc> + 3e5e: 8a c0 rjmp .+276 ; 0x3f74 <main+0x174> + } + else if(ch == STK_LOAD_ADDRESS) { + 3e60: 85 35 cpi r24, 0x55 ; 85 + 3e62: a1 f4 brne .+40 ; 0x3e8c <main+0x8c> + // LOAD ADDRESS + address = getch(); + 3e64: 99 d0 rcall .+306 ; 0x3f98 <getch> + 3e66: 08 2f mov r16, r24 + 3e68: 10 e0 ldi r17, 0x00 ; 0 + 3e6a: 10 93 01 02 sts 0x0201, r17 + 3e6e: 00 93 00 02 sts 0x0200, r16 + address = (address & 0xff) | (getch() << 8); + 3e72: 92 d0 rcall .+292 ; 0x3f98 <getch> + 3e74: 90 e0 ldi r25, 0x00 ; 0 + 3e76: 98 2f mov r25, r24 + 3e78: 88 27 eor r24, r24 + 3e7a: 80 2b or r24, r16 + 3e7c: 91 2b or r25, r17 + address += address; // Convert from word address to byte address + 3e7e: 88 0f add r24, r24 + 3e80: 99 1f adc r25, r25 + 3e82: 90 93 01 02 sts 0x0201, r25 + 3e86: 80 93 00 02 sts 0x0200, r24 + 3e8a: 73 c0 rjmp .+230 ; 0x3f72 <main+0x172> + verifySpace(); + } + else if(ch == STK_UNIVERSAL) { + 3e8c: 86 35 cpi r24, 0x56 ; 86 + 3e8e: 29 f4 brne .+10 ; 0x3e9a <main+0x9a> + // UNIVERSAL command is ignored + getNch(4); + 3e90: 84 e0 ldi r24, 0x04 ; 4 + 3e92: ac d0 rcall .+344 ; 0x3fec <verifySpace+0xc> + putch(0x00); + 3e94: 80 e0 ldi r24, 0x00 ; 0 + 3e96: 71 d0 rcall .+226 ; 0x3f7a <putch> + 3e98: 6d c0 rjmp .+218 ; 0x3f74 <main+0x174> + } + /* Write memory, length is big endian and is in bytes */ + else if(ch == STK_PROG_PAGE) { + 3e9a: 84 36 cpi r24, 0x64 ; 100 + 3e9c: 09 f0 breq .+2 ; 0x3ea0 <main+0xa0> + 3e9e: 43 c0 rjmp .+134 ; 0x3f26 <main+0x126> + // PROGRAM PAGE - we support flash programming only, not EEPROM + uint8_t *bufPtr; + uint16_t addrPtr; + + getLen(); + 3ea0: 8f d0 rcall .+286 ; 0x3fc0 <getLen> + + // Immediately start page erase - this will 4.5ms + boot_page_erase((uint16_t)(void*)address); + 3ea2: e0 91 00 02 lds r30, 0x0200 + 3ea6: f0 91 01 02 lds r31, 0x0201 + 3eaa: 83 e0 ldi r24, 0x03 ; 3 + 3eac: 80 93 57 00 sts 0x0057, r24 + 3eb0: e8 95 spm + 3eb2: c0 e0 ldi r28, 0x00 ; 0 + 3eb4: d1 e0 ldi r29, 0x01 ; 1 + + // While that is going on, read in page contents + bufPtr = buff; + do *bufPtr++ = getch(); + 3eb6: 70 d0 rcall .+224 ; 0x3f98 <getch> + 3eb8: 89 93 st Y+, r24 + while (--length); + 3eba: 80 91 02 02 lds r24, 0x0202 + 3ebe: 81 50 subi r24, 0x01 ; 1 + 3ec0: 80 93 02 02 sts 0x0202, r24 + 3ec4: 88 23 and r24, r24 + 3ec6: b9 f7 brne .-18 ; 0x3eb6 <main+0xb6> + + // Read command terminator, start reply + verifySpace(); + 3ec8: 8b d0 rcall .+278 ; 0x3fe0 <verifySpace> + + // If only a partial page is to be programmed, the erase might not be complete. + // So check that here + boot_spm_busy_wait(); + 3eca: 07 b6 in r0, 0x37 ; 55 + 3ecc: 00 fc sbrc r0, 0 + 3ece: fd cf rjmp .-6 ; 0x3eca <main+0xca> + } +#endif + + // Copy buffer into programming buffer + bufPtr = buff; + addrPtr = (uint16_t)(void*)address; + 3ed0: 40 91 00 02 lds r20, 0x0200 + 3ed4: 50 91 01 02 lds r21, 0x0201 + 3ed8: a0 e0 ldi r26, 0x00 ; 0 + 3eda: b1 e0 ldi r27, 0x01 ; 1 + ch = SPM_PAGESIZE / 2; + do { + uint16_t a; + a = *bufPtr++; + 3edc: 2c 91 ld r18, X + 3ede: 30 e0 ldi r19, 0x00 ; 0 + a |= (*bufPtr++) << 8; + 3ee0: 11 96 adiw r26, 0x01 ; 1 + 3ee2: 8c 91 ld r24, X + 3ee4: 11 97 sbiw r26, 0x01 ; 1 + 3ee6: 90 e0 ldi r25, 0x00 ; 0 + 3ee8: 98 2f mov r25, r24 + 3eea: 88 27 eor r24, r24 + 3eec: 82 2b or r24, r18 + 3eee: 93 2b or r25, r19 +#ifdef VIRTUAL_BOOT_PARTITION +#define rstVect (*(uint16_t*)(0x204)) +#define wdtVect (*(uint16_t*)(0x206)) +#endif +/* main program starts here */ +int main(void) { + 3ef0: 12 96 adiw r26, 0x02 ; 2 + ch = SPM_PAGESIZE / 2; + do { + uint16_t a; + a = *bufPtr++; + a |= (*bufPtr++) << 8; + boot_page_fill((uint16_t)(void*)addrPtr,a); + 3ef2: fa 01 movw r30, r20 + 3ef4: 0c 01 movw r0, r24 + 3ef6: d0 92 57 00 sts 0x0057, r13 + 3efa: e8 95 spm + 3efc: 11 24 eor r1, r1 + addrPtr += 2; + 3efe: 4e 5f subi r20, 0xFE ; 254 + 3f00: 5f 4f sbci r21, 0xFF ; 255 + } while (--ch); + 3f02: f1 e0 ldi r31, 0x01 ; 1 + 3f04: a0 38 cpi r26, 0x80 ; 128 + 3f06: bf 07 cpc r27, r31 + 3f08: 49 f7 brne .-46 ; 0x3edc <main+0xdc> + + // Write from programming buffer + boot_page_write((uint16_t)(void*)address); + 3f0a: e0 91 00 02 lds r30, 0x0200 + 3f0e: f0 91 01 02 lds r31, 0x0201 + 3f12: e0 92 57 00 sts 0x0057, r14 + 3f16: e8 95 spm + boot_spm_busy_wait(); + 3f18: 07 b6 in r0, 0x37 ; 55 + 3f1a: 00 fc sbrc r0, 0 + 3f1c: fd cf rjmp .-6 ; 0x3f18 <main+0x118> + +#if defined(RWWSRE) + // Reenable read access to flash + boot_rww_enable(); + 3f1e: f0 92 57 00 sts 0x0057, r15 + 3f22: e8 95 spm + 3f24: 27 c0 rjmp .+78 ; 0x3f74 <main+0x174> +#endif + + } + /* Read memory block mode, length is big endian. */ + else if(ch == STK_READ_PAGE) { + 3f26: 84 37 cpi r24, 0x74 ; 116 + 3f28: b9 f4 brne .+46 ; 0x3f58 <main+0x158> + // READ PAGE - we only read flash + getLen(); + 3f2a: 4a d0 rcall .+148 ; 0x3fc0 <getLen> + verifySpace(); + 3f2c: 59 d0 rcall .+178 ; 0x3fe0 <verifySpace> + else ch = pgm_read_byte_near(address); + address++; + putch(ch); + } while (--length); +#else + do putch(pgm_read_byte_near(address++)); + 3f2e: e0 91 00 02 lds r30, 0x0200 + 3f32: f0 91 01 02 lds r31, 0x0201 + 3f36: 31 96 adiw r30, 0x01 ; 1 + 3f38: f0 93 01 02 sts 0x0201, r31 + 3f3c: e0 93 00 02 sts 0x0200, r30 + 3f40: 31 97 sbiw r30, 0x01 ; 1 + 3f42: e4 91 lpm r30, Z+ + 3f44: 8e 2f mov r24, r30 + 3f46: 19 d0 rcall .+50 ; 0x3f7a <putch> + while (--length); + 3f48: 80 91 02 02 lds r24, 0x0202 + 3f4c: 81 50 subi r24, 0x01 ; 1 + 3f4e: 80 93 02 02 sts 0x0202, r24 + 3f52: 88 23 and r24, r24 + 3f54: 61 f7 brne .-40 ; 0x3f2e <main+0x12e> + 3f56: 0e c0 rjmp .+28 ; 0x3f74 <main+0x174> +#endif + } + + /* Get device signature bytes */ + else if(ch == STK_READ_SIGN) { + 3f58: 85 37 cpi r24, 0x75 ; 117 + 3f5a: 39 f4 brne .+14 ; 0x3f6a <main+0x16a> + // READ SIGN - return what Avrdude wants to hear + verifySpace(); + 3f5c: 41 d0 rcall .+130 ; 0x3fe0 <verifySpace> + putch(SIGNATURE_0); + 3f5e: 8e e1 ldi r24, 0x1E ; 30 + 3f60: 0c d0 rcall .+24 ; 0x3f7a <putch> + putch(SIGNATURE_1); + 3f62: 84 e9 ldi r24, 0x94 ; 148 + 3f64: 0a d0 rcall .+20 ; 0x3f7a <putch> + putch(SIGNATURE_2); + 3f66: 86 e0 ldi r24, 0x06 ; 6 + 3f68: 96 cf rjmp .-212 ; 0x3e96 <main+0x96> + } + else if (ch == 'Q') { + 3f6a: 81 35 cpi r24, 0x51 ; 81 + 3f6c: 11 f4 brne .+4 ; 0x3f72 <main+0x172> + // Adaboot no-wait mod + watchdogConfig(WATCHDOG_16MS); + 3f6e: 88 e0 ldi r24, 0x08 ; 8 + 3f70: 2c d0 rcall .+88 ; 0x3fca <watchdogConfig> + verifySpace(); + } + else { + // This covers the response to commands like STK_ENTER_PROGMODE + verifySpace(); + 3f72: 36 d0 rcall .+108 ; 0x3fe0 <verifySpace> + } + putch(STK_OK); + 3f74: 80 e1 ldi r24, 0x10 ; 16 + 3f76: 01 d0 rcall .+2 ; 0x3f7a <putch> + 3f78: 63 cf rjmp .-314 ; 0x3e40 <main+0x40> + +00003f7a <putch>: +void putch(char ch) { +#ifndef SOFT_UART + while (!(UCSR0A & _BV(UDRE0))); + UDR0 = ch; +#else + __asm__ __volatile__ ( + 3f7a: 2a e0 ldi r18, 0x0A ; 10 + 3f7c: 30 e0 ldi r19, 0x00 ; 0 + 3f7e: 80 95 com r24 + 3f80: 08 94 sec + 3f82: 10 f4 brcc .+4 ; 0x3f88 <putch+0xe> + 3f84: 59 98 cbi 0x0b, 1 ; 11 + 3f86: 02 c0 rjmp .+4 ; 0x3f8c <putch+0x12> + 3f88: 59 9a sbi 0x0b, 1 ; 11 + 3f8a: 00 00 nop + 3f8c: 15 d0 rcall .+42 ; 0x3fb8 <uartDelay> + 3f8e: 14 d0 rcall .+40 ; 0x3fb8 <uartDelay> + 3f90: 86 95 lsr r24 + 3f92: 2a 95 dec r18 + 3f94: b1 f7 brne .-20 ; 0x3f82 <putch+0x8> + [uartBit] "I" (UART_TX_BIT) + : + "r25" + ); +#endif +} + 3f96: 08 95 ret + +00003f98 <getch>: + return getch(); +} + +// Watchdog functions. These are only safe with interrupts turned off. +void watchdogReset() { + __asm__ __volatile__ ( + 3f98: a8 95 wdr +#ifdef LED_DATA_FLASH + LED_PIN |= _BV(LED); +#endif + + return ch; +} + 3f9a: 29 e0 ldi r18, 0x09 ; 9 + 3f9c: 30 e0 ldi r19, 0x00 ; 0 + 3f9e: 48 99 sbic 0x09, 0 ; 9 + 3fa0: fe cf rjmp .-4 ; 0x3f9e <getch+0x6> + 3fa2: 0a d0 rcall .+20 ; 0x3fb8 <uartDelay> + 3fa4: 09 d0 rcall .+18 ; 0x3fb8 <uartDelay> + 3fa6: 08 d0 rcall .+16 ; 0x3fb8 <uartDelay> + 3fa8: 88 94 clc + 3faa: 48 99 sbic 0x09, 0 ; 9 + 3fac: 08 94 sec + 3fae: 2a 95 dec r18 + 3fb0: 11 f0 breq .+4 ; 0x3fb6 <getch+0x1e> + 3fb2: 87 95 ror r24 + 3fb4: f7 cf rjmp .-18 ; 0x3fa4 <getch+0xc> + 3fb6: 08 95 ret + +00003fb8 <uartDelay>: +#if UART_B_VALUE > 255 +#error Baud rate too slow for soft UART +#endif + +void uartDelay() { + __asm__ __volatile__ ( + 3fb8: 98 e0 ldi r25, 0x08 ; 8 + 3fba: 9a 95 dec r25 + 3fbc: f1 f7 brne .-4 ; 0x3fba <uartDelay+0x2> + 3fbe: 08 95 ret + +00003fc0 <getLen>: + } while (--count); +} +#endif + +uint8_t getLen() { + getch(); + 3fc0: eb df rcall .-42 ; 0x3f98 <getch> + length = getch(); + 3fc2: ea df rcall .-44 ; 0x3f98 <getch> + 3fc4: 80 93 02 02 sts 0x0202, r24 + return getch(); +} + 3fc8: e7 cf rjmp .-50 ; 0x3f98 <getch> + +00003fca <watchdogConfig>: + "wdr\n" + ); +} + +void watchdogConfig(uint8_t x) { + WDTCSR = _BV(WDCE) | _BV(WDE); + 3fca: e0 e6 ldi r30, 0x60 ; 96 + 3fcc: f0 e0 ldi r31, 0x00 ; 0 + 3fce: 98 e1 ldi r25, 0x18 ; 24 + 3fd0: 90 83 st Z, r25 + WDTCSR = x; + 3fd2: 80 83 st Z, r24 +} + 3fd4: 08 95 ret + +00003fd6 <appStart>: + +void appStart() { + watchdogConfig(WATCHDOG_OFF); + 3fd6: 80 e0 ldi r24, 0x00 ; 0 + 3fd8: f8 df rcall .-16 ; 0x3fca <watchdogConfig> + __asm__ __volatile__ ( + 3fda: ee 27 eor r30, r30 + 3fdc: ff 27 eor r31, r31 + 3fde: 09 94 ijmp + +00003fe0 <verifySpace>: + do getch(); while (--count); + verifySpace(); +} + +void verifySpace() { + if (getch() != CRC_EOP) appStart(); + 3fe0: db df rcall .-74 ; 0x3f98 <getch> + 3fe2: 80 32 cpi r24, 0x20 ; 32 + 3fe4: 09 f0 breq .+2 ; 0x3fe8 <verifySpace+0x8> + 3fe6: f7 df rcall .-18 ; 0x3fd6 <appStart> + putch(STK_INSYNC); + 3fe8: 84 e1 ldi r24, 0x14 ; 20 +} + 3fea: c7 cf rjmp .-114 ; 0x3f7a <putch> + ::[count] "M" (UART_B_VALUE) + ); +} +#endif + +void getNch(uint8_t count) { + 3fec: 1f 93 push r17 + 3fee: 18 2f mov r17, r24 + +00003ff0 <getNch>: + do getch(); while (--count); + 3ff0: d3 df rcall .-90 ; 0x3f98 <getch> + 3ff2: 11 50 subi r17, 0x01 ; 1 + 3ff4: e9 f7 brne .-6 ; 0x3ff0 <getNch> + verifySpace(); + 3ff6: f4 df rcall .-24 ; 0x3fe0 <verifySpace> +} + 3ff8: 1f 91 pop r17 + 3ffa: 08 95 ret diff --git a/test/ardmake/hardware/bootloaders/optiboot/optiboot_lilypad_resonator.hex b/test/ardmake/hardware/bootloaders/optiboot/optiboot_lilypad_resonator.hex new file mode 100644 index 0000000..9d31a7a --- /dev/null +++ b/test/ardmake/hardware/bootloaders/optiboot/optiboot_lilypad_resonator.hex @@ -0,0 +1,34 @@ +:103E000085E08093810084B714BE81FFE4D08DE00B
+:103E1000DCD0259A519A86E028E13EEF91E030937C
+:103E200085002093840096BBB09BFECF1D9AA89579
+:103E30008150A9F7DD24D394A5E0EA2EF1E1FF2E0D
+:103E4000ABD0813421F481E0D1D083E024C082342E
+:103E500011F484E103C0853419F485E0C7D08AC029
+:103E60008535A1F499D0082F10E01093010200933A
+:103E7000000292D090E0982F8827802B912B880FFA
+:103E8000991F909301028093000273C0863529F434
+:103E900084E0ACD080E071D06DC0843609F043C0BE
+:103EA0008FD0E0910002F091010283E080935700EF
+:103EB000E895C0E0D1E070D08993809102028150F2
+:103EC000809302028823B9F78BD007B600FCFDCFA0
+:103ED0004091000250910102A0E0B1E02C9130E04D
+:103EE00011968C91119790E0982F8827822B932B15
+:103EF0001296FA010C01D0925700E89511244E5FFA
+:103F00005F4FF1E0A038BF0749F7E0910002F09160
+:103F10000102E0925700E89507B600FCFDCFF09251
+:103F20005700E89527C08437B9F44AD059D0E091BA
+:103F30000002F09101023196F0930102E093000239
+:103F40003197E4918E2F19D0809102028150809395
+:103F50000202882361F70EC0853739F441D08EE123
+:103F60000CD084E90AD086E096CF813511F488E040
+:103F70002CD036D080E101D063CF2AE030E08095AC
+:103F8000089410F4599802C0599A000015D014D022
+:103F900086952A95B1F70895A89529E030E04899CB
+:103FA000FECF0AD009D008D08894489908942A9561
+:103FB00011F08795F7CF089598E09A95F1F7089555
+:103FC000EBDFEADF80930202E7CFE0E6F0E098E182
+:103FD00090838083089580E0F8DFEE27FF2709941F
+:103FE000DBDF803209F0F7DF84E1C7CF1F93182FA2
+:0C3FF000D3DF1150E9F7F4DF1F910895B2
+:0400000300003E00BB
+:00000001FF
diff --git a/test/ardmake/hardware/bootloaders/optiboot/optiboot_lilypad_resonator.lst b/test/ardmake/hardware/bootloaders/optiboot/optiboot_lilypad_resonator.lst new file mode 100644 index 0000000..80ecb83 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/optiboot/optiboot_lilypad_resonator.lst @@ -0,0 +1,533 @@ + +optiboot_lilypad_resonator.elf: file format elf32-avr + +Sections: +Idx Name Size VMA LMA File off Algn + 0 .text 000001fc 00003e00 00003e00 00000054 2**1 + CONTENTS, ALLOC, LOAD, READONLY, CODE + 1 .debug_aranges 00000028 00000000 00000000 00000250 2**0 + CONTENTS, READONLY, DEBUGGING + 2 .debug_pubnames 00000078 00000000 00000000 00000278 2**0 + CONTENTS, READONLY, DEBUGGING + 3 .debug_info 00000277 00000000 00000000 000002f0 2**0 + CONTENTS, READONLY, DEBUGGING + 4 .debug_abbrev 00000194 00000000 00000000 00000567 2**0 + CONTENTS, READONLY, DEBUGGING + 5 .debug_line 000003bb 00000000 00000000 000006fb 2**0 + CONTENTS, READONLY, DEBUGGING + 6 .debug_frame 000000a0 00000000 00000000 00000ab8 2**2 + CONTENTS, READONLY, DEBUGGING + 7 .debug_str 0000013f 00000000 00000000 00000b58 2**0 + CONTENTS, READONLY, DEBUGGING + 8 .debug_loc 000001a0 00000000 00000000 00000c97 2**0 + CONTENTS, READONLY, DEBUGGING + 9 .debug_ranges 00000070 00000000 00000000 00000e37 2**0 + CONTENTS, READONLY, DEBUGGING + +Disassembly of section .text: + +00003e00 <main>: +#ifdef VIRTUAL_BOOT_PARTITION +#define rstVect (*(uint16_t*)(0x204)) +#define wdtVect (*(uint16_t*)(0x206)) +#endif +/* main program starts here */ +int main(void) { + 3e00: 85 e0 ldi r24, 0x05 ; 5 + 3e02: 80 93 81 00 sts 0x0081, r24 + UCSR0C = _BV(UCSZ00) | _BV(UCSZ01); + UBRR0L = (uint8_t)( (F_CPU + BAUD_RATE * 4L) / (BAUD_RATE * 8L) - 1 ); +#endif + + // Adaboot no-wait mod + ch = MCUSR; + 3e06: 84 b7 in r24, 0x34 ; 52 + MCUSR = 0; + 3e08: 14 be out 0x34, r1 ; 52 + if (!(ch & _BV(EXTRF))) appStart(); + 3e0a: 81 ff sbrs r24, 1 + 3e0c: e4 d0 rcall .+456 ; 0x3fd6 <appStart> + + // Set up watchdog to trigger after 500ms + watchdogConfig(WATCHDOG_500MS); + 3e0e: 8d e0 ldi r24, 0x0D ; 13 + 3e10: dc d0 rcall .+440 ; 0x3fca <watchdogConfig> + + /* Set LED pin as output */ + LED_DDR |= _BV(LED); + 3e12: 25 9a sbi 0x04, 5 ; 4 + +#ifdef SOFT_UART + /* Set TX pin as output */ + UART_DDR |= _BV(UART_TX_BIT); + 3e14: 51 9a sbi 0x0a, 1 ; 10 + 3e16: 86 e0 ldi r24, 0x06 ; 6 +} + +#if LED_START_FLASHES > 0 +void flash_led(uint8_t count) { + do { + TCNT1 = -(F_CPU/(1024*16)); + 3e18: 28 e1 ldi r18, 0x18 ; 24 + 3e1a: 3e ef ldi r19, 0xFE ; 254 + TIFR1 = _BV(TOV1); + 3e1c: 91 e0 ldi r25, 0x01 ; 1 +} + +#if LED_START_FLASHES > 0 +void flash_led(uint8_t count) { + do { + TCNT1 = -(F_CPU/(1024*16)); + 3e1e: 30 93 85 00 sts 0x0085, r19 + 3e22: 20 93 84 00 sts 0x0084, r18 + TIFR1 = _BV(TOV1); + 3e26: 96 bb out 0x16, r25 ; 22 + while(!(TIFR1 & _BV(TOV1))); + 3e28: b0 9b sbis 0x16, 0 ; 22 + 3e2a: fe cf rjmp .-4 ; 0x3e28 <main+0x28> + LED_PIN |= _BV(LED); + 3e2c: 1d 9a sbi 0x03, 5 ; 3 + return getch(); +} + +// Watchdog functions. These are only safe with interrupts turned off. +void watchdogReset() { + __asm__ __volatile__ ( + 3e2e: a8 95 wdr + TCNT1 = -(F_CPU/(1024*16)); + TIFR1 = _BV(TOV1); + while(!(TIFR1 & _BV(TOV1))); + LED_PIN |= _BV(LED); + watchdogReset(); + } while (--count); + 3e30: 81 50 subi r24, 0x01 ; 1 + 3e32: a9 f7 brne .-22 ; 0x3e1e <main+0x1e> + /* get character from UART */ + ch = getch(); + + if(ch == STK_GET_PARAMETER) { + // GET PARAMETER returns a generic 0x03 reply - enough to keep Avrdude happy + getNch(1); + 3e34: dd 24 eor r13, r13 + 3e36: d3 94 inc r13 + boot_page_fill((uint16_t)(void*)addrPtr,a); + addrPtr += 2; + } while (--ch); + + // Write from programming buffer + boot_page_write((uint16_t)(void*)address); + 3e38: a5 e0 ldi r26, 0x05 ; 5 + 3e3a: ea 2e mov r14, r26 + boot_spm_busy_wait(); + +#if defined(RWWSRE) + // Reenable read access to flash + boot_rww_enable(); + 3e3c: f1 e1 ldi r31, 0x11 ; 17 + 3e3e: ff 2e mov r15, r31 +#endif + + /* Forever loop */ + for (;;) { + /* get character from UART */ + ch = getch(); + 3e40: ab d0 rcall .+342 ; 0x3f98 <getch> + + if(ch == STK_GET_PARAMETER) { + 3e42: 81 34 cpi r24, 0x41 ; 65 + 3e44: 21 f4 brne .+8 ; 0x3e4e <main+0x4e> + // GET PARAMETER returns a generic 0x03 reply - enough to keep Avrdude happy + getNch(1); + 3e46: 81 e0 ldi r24, 0x01 ; 1 + 3e48: d1 d0 rcall .+418 ; 0x3fec <verifySpace+0xc> + putch(0x03); + 3e4a: 83 e0 ldi r24, 0x03 ; 3 + 3e4c: 24 c0 rjmp .+72 ; 0x3e96 <main+0x96> + } + else if(ch == STK_SET_DEVICE) { + 3e4e: 82 34 cpi r24, 0x42 ; 66 + 3e50: 11 f4 brne .+4 ; 0x3e56 <main+0x56> + // SET DEVICE is ignored + getNch(20); + 3e52: 84 e1 ldi r24, 0x14 ; 20 + 3e54: 03 c0 rjmp .+6 ; 0x3e5c <main+0x5c> + } + else if(ch == STK_SET_DEVICE_EXT) { + 3e56: 85 34 cpi r24, 0x45 ; 69 + 3e58: 19 f4 brne .+6 ; 0x3e60 <main+0x60> + // SET DEVICE EXT is ignored + getNch(5); + 3e5a: 85 e0 ldi r24, 0x05 ; 5 + 3e5c: c7 d0 rcall .+398 ; 0x3fec <verifySpace+0xc> + 3e5e: 8a c0 rjmp .+276 ; 0x3f74 <main+0x174> + } + else if(ch == STK_LOAD_ADDRESS) { + 3e60: 85 35 cpi r24, 0x55 ; 85 + 3e62: a1 f4 brne .+40 ; 0x3e8c <main+0x8c> + // LOAD ADDRESS + address = getch(); + 3e64: 99 d0 rcall .+306 ; 0x3f98 <getch> + 3e66: 08 2f mov r16, r24 + 3e68: 10 e0 ldi r17, 0x00 ; 0 + 3e6a: 10 93 01 02 sts 0x0201, r17 + 3e6e: 00 93 00 02 sts 0x0200, r16 + address = (address & 0xff) | (getch() << 8); + 3e72: 92 d0 rcall .+292 ; 0x3f98 <getch> + 3e74: 90 e0 ldi r25, 0x00 ; 0 + 3e76: 98 2f mov r25, r24 + 3e78: 88 27 eor r24, r24 + 3e7a: 80 2b or r24, r16 + 3e7c: 91 2b or r25, r17 + address += address; // Convert from word address to byte address + 3e7e: 88 0f add r24, r24 + 3e80: 99 1f adc r25, r25 + 3e82: 90 93 01 02 sts 0x0201, r25 + 3e86: 80 93 00 02 sts 0x0200, r24 + 3e8a: 73 c0 rjmp .+230 ; 0x3f72 <main+0x172> + verifySpace(); + } + else if(ch == STK_UNIVERSAL) { + 3e8c: 86 35 cpi r24, 0x56 ; 86 + 3e8e: 29 f4 brne .+10 ; 0x3e9a <main+0x9a> + // UNIVERSAL command is ignored + getNch(4); + 3e90: 84 e0 ldi r24, 0x04 ; 4 + 3e92: ac d0 rcall .+344 ; 0x3fec <verifySpace+0xc> + putch(0x00); + 3e94: 80 e0 ldi r24, 0x00 ; 0 + 3e96: 71 d0 rcall .+226 ; 0x3f7a <putch> + 3e98: 6d c0 rjmp .+218 ; 0x3f74 <main+0x174> + } + /* Write memory, length is big endian and is in bytes */ + else if(ch == STK_PROG_PAGE) { + 3e9a: 84 36 cpi r24, 0x64 ; 100 + 3e9c: 09 f0 breq .+2 ; 0x3ea0 <main+0xa0> + 3e9e: 43 c0 rjmp .+134 ; 0x3f26 <main+0x126> + // PROGRAM PAGE - we support flash programming only, not EEPROM + uint8_t *bufPtr; + uint16_t addrPtr; + + getLen(); + 3ea0: 8f d0 rcall .+286 ; 0x3fc0 <getLen> + + // Immediately start page erase - this will 4.5ms + boot_page_erase((uint16_t)(void*)address); + 3ea2: e0 91 00 02 lds r30, 0x0200 + 3ea6: f0 91 01 02 lds r31, 0x0201 + 3eaa: 83 e0 ldi r24, 0x03 ; 3 + 3eac: 80 93 57 00 sts 0x0057, r24 + 3eb0: e8 95 spm + 3eb2: c0 e0 ldi r28, 0x00 ; 0 + 3eb4: d1 e0 ldi r29, 0x01 ; 1 + + // While that is going on, read in page contents + bufPtr = buff; + do *bufPtr++ = getch(); + 3eb6: 70 d0 rcall .+224 ; 0x3f98 <getch> + 3eb8: 89 93 st Y+, r24 + while (--length); + 3eba: 80 91 02 02 lds r24, 0x0202 + 3ebe: 81 50 subi r24, 0x01 ; 1 + 3ec0: 80 93 02 02 sts 0x0202, r24 + 3ec4: 88 23 and r24, r24 + 3ec6: b9 f7 brne .-18 ; 0x3eb6 <main+0xb6> + + // Read command terminator, start reply + verifySpace(); + 3ec8: 8b d0 rcall .+278 ; 0x3fe0 <verifySpace> + + // If only a partial page is to be programmed, the erase might not be complete. + // So check that here + boot_spm_busy_wait(); + 3eca: 07 b6 in r0, 0x37 ; 55 + 3ecc: 00 fc sbrc r0, 0 + 3ece: fd cf rjmp .-6 ; 0x3eca <main+0xca> + } +#endif + + // Copy buffer into programming buffer + bufPtr = buff; + addrPtr = (uint16_t)(void*)address; + 3ed0: 40 91 00 02 lds r20, 0x0200 + 3ed4: 50 91 01 02 lds r21, 0x0201 + 3ed8: a0 e0 ldi r26, 0x00 ; 0 + 3eda: b1 e0 ldi r27, 0x01 ; 1 + ch = SPM_PAGESIZE / 2; + do { + uint16_t a; + a = *bufPtr++; + 3edc: 2c 91 ld r18, X + 3ede: 30 e0 ldi r19, 0x00 ; 0 + a |= (*bufPtr++) << 8; + 3ee0: 11 96 adiw r26, 0x01 ; 1 + 3ee2: 8c 91 ld r24, X + 3ee4: 11 97 sbiw r26, 0x01 ; 1 + 3ee6: 90 e0 ldi r25, 0x00 ; 0 + 3ee8: 98 2f mov r25, r24 + 3eea: 88 27 eor r24, r24 + 3eec: 82 2b or r24, r18 + 3eee: 93 2b or r25, r19 +#ifdef VIRTUAL_BOOT_PARTITION +#define rstVect (*(uint16_t*)(0x204)) +#define wdtVect (*(uint16_t*)(0x206)) +#endif +/* main program starts here */ +int main(void) { + 3ef0: 12 96 adiw r26, 0x02 ; 2 + ch = SPM_PAGESIZE / 2; + do { + uint16_t a; + a = *bufPtr++; + a |= (*bufPtr++) << 8; + boot_page_fill((uint16_t)(void*)addrPtr,a); + 3ef2: fa 01 movw r30, r20 + 3ef4: 0c 01 movw r0, r24 + 3ef6: d0 92 57 00 sts 0x0057, r13 + 3efa: e8 95 spm + 3efc: 11 24 eor r1, r1 + addrPtr += 2; + 3efe: 4e 5f subi r20, 0xFE ; 254 + 3f00: 5f 4f sbci r21, 0xFF ; 255 + } while (--ch); + 3f02: f1 e0 ldi r31, 0x01 ; 1 + 3f04: a0 38 cpi r26, 0x80 ; 128 + 3f06: bf 07 cpc r27, r31 + 3f08: 49 f7 brne .-46 ; 0x3edc <main+0xdc> + + // Write from programming buffer + boot_page_write((uint16_t)(void*)address); + 3f0a: e0 91 00 02 lds r30, 0x0200 + 3f0e: f0 91 01 02 lds r31, 0x0201 + 3f12: e0 92 57 00 sts 0x0057, r14 + 3f16: e8 95 spm + boot_spm_busy_wait(); + 3f18: 07 b6 in r0, 0x37 ; 55 + 3f1a: 00 fc sbrc r0, 0 + 3f1c: fd cf rjmp .-6 ; 0x3f18 <main+0x118> + +#if defined(RWWSRE) + // Reenable read access to flash + boot_rww_enable(); + 3f1e: f0 92 57 00 sts 0x0057, r15 + 3f22: e8 95 spm + 3f24: 27 c0 rjmp .+78 ; 0x3f74 <main+0x174> +#endif + + } + /* Read memory block mode, length is big endian. */ + else if(ch == STK_READ_PAGE) { + 3f26: 84 37 cpi r24, 0x74 ; 116 + 3f28: b9 f4 brne .+46 ; 0x3f58 <main+0x158> + // READ PAGE - we only read flash + getLen(); + 3f2a: 4a d0 rcall .+148 ; 0x3fc0 <getLen> + verifySpace(); + 3f2c: 59 d0 rcall .+178 ; 0x3fe0 <verifySpace> + else ch = pgm_read_byte_near(address); + address++; + putch(ch); + } while (--length); +#else + do putch(pgm_read_byte_near(address++)); + 3f2e: e0 91 00 02 lds r30, 0x0200 + 3f32: f0 91 01 02 lds r31, 0x0201 + 3f36: 31 96 adiw r30, 0x01 ; 1 + 3f38: f0 93 01 02 sts 0x0201, r31 + 3f3c: e0 93 00 02 sts 0x0200, r30 + 3f40: 31 97 sbiw r30, 0x01 ; 1 + 3f42: e4 91 lpm r30, Z+ + 3f44: 8e 2f mov r24, r30 + 3f46: 19 d0 rcall .+50 ; 0x3f7a <putch> + while (--length); + 3f48: 80 91 02 02 lds r24, 0x0202 + 3f4c: 81 50 subi r24, 0x01 ; 1 + 3f4e: 80 93 02 02 sts 0x0202, r24 + 3f52: 88 23 and r24, r24 + 3f54: 61 f7 brne .-40 ; 0x3f2e <main+0x12e> + 3f56: 0e c0 rjmp .+28 ; 0x3f74 <main+0x174> +#endif + } + + /* Get device signature bytes */ + else if(ch == STK_READ_SIGN) { + 3f58: 85 37 cpi r24, 0x75 ; 117 + 3f5a: 39 f4 brne .+14 ; 0x3f6a <main+0x16a> + // READ SIGN - return what Avrdude wants to hear + verifySpace(); + 3f5c: 41 d0 rcall .+130 ; 0x3fe0 <verifySpace> + putch(SIGNATURE_0); + 3f5e: 8e e1 ldi r24, 0x1E ; 30 + 3f60: 0c d0 rcall .+24 ; 0x3f7a <putch> + putch(SIGNATURE_1); + 3f62: 84 e9 ldi r24, 0x94 ; 148 + 3f64: 0a d0 rcall .+20 ; 0x3f7a <putch> + putch(SIGNATURE_2); + 3f66: 86 e0 ldi r24, 0x06 ; 6 + 3f68: 96 cf rjmp .-212 ; 0x3e96 <main+0x96> + } + else if (ch == 'Q') { + 3f6a: 81 35 cpi r24, 0x51 ; 81 + 3f6c: 11 f4 brne .+4 ; 0x3f72 <main+0x172> + // Adaboot no-wait mod + watchdogConfig(WATCHDOG_16MS); + 3f6e: 88 e0 ldi r24, 0x08 ; 8 + 3f70: 2c d0 rcall .+88 ; 0x3fca <watchdogConfig> + verifySpace(); + } + else { + // This covers the response to commands like STK_ENTER_PROGMODE + verifySpace(); + 3f72: 36 d0 rcall .+108 ; 0x3fe0 <verifySpace> + } + putch(STK_OK); + 3f74: 80 e1 ldi r24, 0x10 ; 16 + 3f76: 01 d0 rcall .+2 ; 0x3f7a <putch> + 3f78: 63 cf rjmp .-314 ; 0x3e40 <main+0x40> + +00003f7a <putch>: +void putch(char ch) { +#ifndef SOFT_UART + while (!(UCSR0A & _BV(UDRE0))); + UDR0 = ch; +#else + __asm__ __volatile__ ( + 3f7a: 2a e0 ldi r18, 0x0A ; 10 + 3f7c: 30 e0 ldi r19, 0x00 ; 0 + 3f7e: 80 95 com r24 + 3f80: 08 94 sec + 3f82: 10 f4 brcc .+4 ; 0x3f88 <putch+0xe> + 3f84: 59 98 cbi 0x0b, 1 ; 11 + 3f86: 02 c0 rjmp .+4 ; 0x3f8c <putch+0x12> + 3f88: 59 9a sbi 0x0b, 1 ; 11 + 3f8a: 00 00 nop + 3f8c: 15 d0 rcall .+42 ; 0x3fb8 <uartDelay> + 3f8e: 14 d0 rcall .+40 ; 0x3fb8 <uartDelay> + 3f90: 86 95 lsr r24 + 3f92: 2a 95 dec r18 + 3f94: b1 f7 brne .-20 ; 0x3f82 <putch+0x8> + [uartBit] "I" (UART_TX_BIT) + : + "r25" + ); +#endif +} + 3f96: 08 95 ret + +00003f98 <getch>: + return getch(); +} + +// Watchdog functions. These are only safe with interrupts turned off. +void watchdogReset() { + __asm__ __volatile__ ( + 3f98: a8 95 wdr +#ifdef LED_DATA_FLASH + LED_PIN |= _BV(LED); +#endif + + return ch; +} + 3f9a: 29 e0 ldi r18, 0x09 ; 9 + 3f9c: 30 e0 ldi r19, 0x00 ; 0 + 3f9e: 48 99 sbic 0x09, 0 ; 9 + 3fa0: fe cf rjmp .-4 ; 0x3f9e <getch+0x6> + 3fa2: 0a d0 rcall .+20 ; 0x3fb8 <uartDelay> + 3fa4: 09 d0 rcall .+18 ; 0x3fb8 <uartDelay> + 3fa6: 08 d0 rcall .+16 ; 0x3fb8 <uartDelay> + 3fa8: 88 94 clc + 3faa: 48 99 sbic 0x09, 0 ; 9 + 3fac: 08 94 sec + 3fae: 2a 95 dec r18 + 3fb0: 11 f0 breq .+4 ; 0x3fb6 <getch+0x1e> + 3fb2: 87 95 ror r24 + 3fb4: f7 cf rjmp .-18 ; 0x3fa4 <getch+0xc> + 3fb6: 08 95 ret + +00003fb8 <uartDelay>: +#if UART_B_VALUE > 255 +#error Baud rate too slow for soft UART +#endif + +void uartDelay() { + __asm__ __volatile__ ( + 3fb8: 98 e0 ldi r25, 0x08 ; 8 + 3fba: 9a 95 dec r25 + 3fbc: f1 f7 brne .-4 ; 0x3fba <uartDelay+0x2> + 3fbe: 08 95 ret + +00003fc0 <getLen>: + } while (--count); +} +#endif + +uint8_t getLen() { + getch(); + 3fc0: eb df rcall .-42 ; 0x3f98 <getch> + length = getch(); + 3fc2: ea df rcall .-44 ; 0x3f98 <getch> + 3fc4: 80 93 02 02 sts 0x0202, r24 + return getch(); +} + 3fc8: e7 cf rjmp .-50 ; 0x3f98 <getch> + +00003fca <watchdogConfig>: + "wdr\n" + ); +} + +void watchdogConfig(uint8_t x) { + WDTCSR = _BV(WDCE) | _BV(WDE); + 3fca: e0 e6 ldi r30, 0x60 ; 96 + 3fcc: f0 e0 ldi r31, 0x00 ; 0 + 3fce: 98 e1 ldi r25, 0x18 ; 24 + 3fd0: 90 83 st Z, r25 + WDTCSR = x; + 3fd2: 80 83 st Z, r24 +} + 3fd4: 08 95 ret + +00003fd6 <appStart>: + +void appStart() { + watchdogConfig(WATCHDOG_OFF); + 3fd6: 80 e0 ldi r24, 0x00 ; 0 + 3fd8: f8 df rcall .-16 ; 0x3fca <watchdogConfig> + __asm__ __volatile__ ( + 3fda: ee 27 eor r30, r30 + 3fdc: ff 27 eor r31, r31 + 3fde: 09 94 ijmp + +00003fe0 <verifySpace>: + do getch(); while (--count); + verifySpace(); +} + +void verifySpace() { + if (getch() != CRC_EOP) appStart(); + 3fe0: db df rcall .-74 ; 0x3f98 <getch> + 3fe2: 80 32 cpi r24, 0x20 ; 32 + 3fe4: 09 f0 breq .+2 ; 0x3fe8 <verifySpace+0x8> + 3fe6: f7 df rcall .-18 ; 0x3fd6 <appStart> + putch(STK_INSYNC); + 3fe8: 84 e1 ldi r24, 0x14 ; 20 +} + 3fea: c7 cf rjmp .-114 ; 0x3f7a <putch> + ::[count] "M" (UART_B_VALUE) + ); +} +#endif + +void getNch(uint8_t count) { + 3fec: 1f 93 push r17 + 3fee: 18 2f mov r17, r24 + +00003ff0 <getNch>: + do getch(); while (--count); + 3ff0: d3 df rcall .-90 ; 0x3f98 <getch> + 3ff2: 11 50 subi r17, 0x01 ; 1 + 3ff4: e9 f7 brne .-6 ; 0x3ff0 <getNch> + verifySpace(); + 3ff6: f4 df rcall .-24 ; 0x3fe0 <verifySpace> +} + 3ff8: 1f 91 pop r17 + 3ffa: 08 95 ret diff --git a/test/ardmake/hardware/bootloaders/optiboot/optiboot_luminet.hex b/test/ardmake/hardware/bootloaders/optiboot/optiboot_luminet.hex new file mode 100644 index 0000000..0e51124 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/optiboot/optiboot_luminet.hex @@ -0,0 +1,42 @@ +:101D000085E08EBD84B714BE81FF27D18DE021D13F
+:101D1000D49AD29A86E023EC3FEF91E03DBD2CBDF2
+:101D20009BB9589BFECFCC9AA8958150B9F7CC248B
+:101D3000C39485E0E82E0FE7D02E1EECF12EF0D0F4
+:101D4000813421F481E014D183E024C0823411F481
+:101D500084E103C0853419F485E00AD1CFC085350C
+:101D6000A1F4DED0082F10E01093010200930002CE
+:101D7000D7D090E0982F8827802B912B880F991F20
+:101D80009093010280930002B8C0863529F484E064
+:101D9000EFD080E0B6D0B2C0843609F06EC0D4D0A7
+:101DA000E0910002F091010283E080935700E895F2
+:101DB000C0E0D1E0B5D08993809102028150809338
+:101DC00002028823B9F7CED007B600FCFDCF809180
+:101DD000000290910102892B41F580910001209130
+:101DE000010130E0322F222790E0282B392B30934D
+:101DF00005022093040240910A0180910B0190E0BA
+:101E0000982F882750E0842B952B9093070280937E
+:101E100006022450304020930A01232F33272093B9
+:101E20000B01D0920001F09201014091000250910B
+:101E30000102A0E0B1E02C9130E011968C91119755
+:101E400090E0982F8827822B932B1296FA010C0191
+:101E5000C0925700E89511244E5F5F4FF1E0A03427
+:101E6000BF0749F7E0910002F0910102E0925700AC
+:101E7000E89507B600FCFDCF41C0843789F564D0F2
+:101E800071D0E0910002F0910102309719F4209195
+:101E9000040213C0E130F10519F4209105020DC0D0
+:101EA000EA30F10519F42091060207C0EB30F10584
+:101EB00019F42091070201C02491809100029091B1
+:101EC000010201969093010280930002822F19D0A3
+:101ED00080910202815080930202882391F60EC005
+:101EE000853739F43FD08EE10CD083E90AD08CE0FD
+:101EF00051CF813511F488E02CD034D080E101D06D
+:101F00001ECF2AE030E08095089410F4DA9802C0E1
+:101F1000DA9A000015D014D086952A95B1F7089565
+:101F2000A89529E030E0CB99FECF0AD009D008D09F
+:101F30008894CB9908942A9511F08795F7CF089546
+:101F40009EE09A95F1F70895EBDFEADF80930202B5
+:101F5000E7CF98E191BD81BD089580E0FADFE5E02B
+:101F6000FF270994DDDF803209F0F7DF84E1C9CF74
+:101F70001F93182FD5DF1150E9F7F4DF1F91089553
+:0400000300001D00DC
+:00000001FF
diff --git a/test/ardmake/hardware/bootloaders/optiboot/optiboot_luminet.lst b/test/ardmake/hardware/bootloaders/optiboot/optiboot_luminet.lst new file mode 100644 index 0000000..59468cb --- /dev/null +++ b/test/ardmake/hardware/bootloaders/optiboot/optiboot_luminet.lst @@ -0,0 +1,604 @@ + +optiboot_luminet.elf: file format elf32-avr + +Sections: +Idx Name Size VMA LMA File off Algn + 0 .text 00000280 00001d00 00001d00 00000054 2**1 + CONTENTS, ALLOC, LOAD, READONLY, CODE + 1 .debug_aranges 00000028 00000000 00000000 000002d4 2**0 + CONTENTS, READONLY, DEBUGGING + 2 .debug_pubnames 00000078 00000000 00000000 000002fc 2**0 + CONTENTS, READONLY, DEBUGGING + 3 .debug_info 00000289 00000000 00000000 00000374 2**0 + CONTENTS, READONLY, DEBUGGING + 4 .debug_abbrev 000001a1 00000000 00000000 000005fd 2**0 + CONTENTS, READONLY, DEBUGGING + 5 .debug_line 00000435 00000000 00000000 0000079e 2**0 + CONTENTS, READONLY, DEBUGGING + 6 .debug_frame 000000a0 00000000 00000000 00000bd4 2**2 + CONTENTS, READONLY, DEBUGGING + 7 .debug_str 00000144 00000000 00000000 00000c74 2**0 + CONTENTS, READONLY, DEBUGGING + 8 .debug_loc 00000194 00000000 00000000 00000db8 2**0 + CONTENTS, READONLY, DEBUGGING + 9 .debug_ranges 00000088 00000000 00000000 00000f4c 2**0 + CONTENTS, READONLY, DEBUGGING + +Disassembly of section .text: + +00001d00 <main>: +#ifdef VIRTUAL_BOOT_PARTITION +#define rstVect (*(uint16_t*)(0x204)) +#define wdtVect (*(uint16_t*)(0x206)) +#endif +/* main program starts here */ +int main(void) { + 1d00: 85 e0 ldi r24, 0x05 ; 5 + 1d02: 8e bd out 0x2e, r24 ; 46 + UCSR0C = _BV(UCSZ00) | _BV(UCSZ01); + UBRR0L = (uint8_t)( (F_CPU + BAUD_RATE * 4L) / (BAUD_RATE * 8L) - 1 ); +#endif + + // Adaboot no-wait mod + ch = MCUSR; + 1d04: 84 b7 in r24, 0x34 ; 52 + MCUSR = 0; + 1d06: 14 be out 0x34, r1 ; 52 + if (!(ch & _BV(EXTRF))) appStart(); + 1d08: 81 ff sbrs r24, 1 + 1d0a: 27 d1 rcall .+590 ; 0x1f5a <appStart> + + // Set up watchdog to trigger after 500ms + watchdogConfig(WATCHDOG_500MS); + 1d0c: 8d e0 ldi r24, 0x0D ; 13 + 1d0e: 21 d1 rcall .+578 ; 0x1f52 <watchdogConfig> + + /* Set LED pin as output */ + LED_DDR |= _BV(LED); + 1d10: d4 9a sbi 0x1a, 4 ; 26 + +#ifdef SOFT_UART + /* Set TX pin as output */ + UART_DDR |= _BV(UART_TX_BIT); + 1d12: d2 9a sbi 0x1a, 2 ; 26 + 1d14: 86 e0 ldi r24, 0x06 ; 6 +} + +#if LED_START_FLASHES > 0 +void flash_led(uint8_t count) { + do { + TCNT1 = -(F_CPU/(1024*16)); + 1d16: 23 ec ldi r18, 0xC3 ; 195 + 1d18: 3f ef ldi r19, 0xFF ; 255 + TIFR1 = _BV(TOV1); + 1d1a: 91 e0 ldi r25, 0x01 ; 1 +} + +#if LED_START_FLASHES > 0 +void flash_led(uint8_t count) { + do { + TCNT1 = -(F_CPU/(1024*16)); + 1d1c: 3d bd out 0x2d, r19 ; 45 + 1d1e: 2c bd out 0x2c, r18 ; 44 + TIFR1 = _BV(TOV1); + 1d20: 9b b9 out 0x0b, r25 ; 11 + while(!(TIFR1 & _BV(TOV1))); + 1d22: 58 9b sbis 0x0b, 0 ; 11 + 1d24: fe cf rjmp .-4 ; 0x1d22 <main+0x22> + LED_PIN |= _BV(LED); + 1d26: cc 9a sbi 0x19, 4 ; 25 + return getch(); +} + +// Watchdog functions. These are only safe with interrupts turned off. +void watchdogReset() { + __asm__ __volatile__ ( + 1d28: a8 95 wdr + TCNT1 = -(F_CPU/(1024*16)); + TIFR1 = _BV(TOV1); + while(!(TIFR1 & _BV(TOV1))); + LED_PIN |= _BV(LED); + watchdogReset(); + } while (--count); + 1d2a: 81 50 subi r24, 0x01 ; 1 + 1d2c: b9 f7 brne .-18 ; 0x1d1c <main+0x1c> + /* get character from UART */ + ch = getch(); + + if(ch == STK_GET_PARAMETER) { + // GET PARAMETER returns a generic 0x03 reply - enough to keep Avrdude happy + getNch(1); + 1d2e: cc 24 eor r12, r12 + 1d30: c3 94 inc r12 + boot_page_fill((uint16_t)(void*)addrPtr,a); + addrPtr += 2; + } while (--ch); + + // Write from programming buffer + boot_page_write((uint16_t)(void*)address); + 1d32: 85 e0 ldi r24, 0x05 ; 5 + 1d34: e8 2e mov r14, r24 + vect -= 4; // Instruction is a relative jump (rjmp), so recalculate. + buff[10] = vect & 0xff; + buff[11] = vect >> 8; + + // Add jump to bootloader at RESET vector + buff[0] = 0x7f; + 1d36: 0f e7 ldi r16, 0x7F ; 127 + 1d38: d0 2e mov r13, r16 + buff[1] = 0xce; // rjmp 0x1d00 instruction + 1d3a: 1e ec ldi r17, 0xCE ; 206 + 1d3c: f1 2e mov r15, r17 +#endif + + /* Forever loop */ + for (;;) { + /* get character from UART */ + ch = getch(); + 1d3e: f0 d0 rcall .+480 ; 0x1f20 <getch> + + if(ch == STK_GET_PARAMETER) { + 1d40: 81 34 cpi r24, 0x41 ; 65 + 1d42: 21 f4 brne .+8 ; 0x1d4c <main+0x4c> + // GET PARAMETER returns a generic 0x03 reply - enough to keep Avrdude happy + getNch(1); + 1d44: 81 e0 ldi r24, 0x01 ; 1 + 1d46: 14 d1 rcall .+552 ; 0x1f70 <verifySpace+0xc> + putch(0x03); + 1d48: 83 e0 ldi r24, 0x03 ; 3 + 1d4a: 24 c0 rjmp .+72 ; 0x1d94 <main+0x94> + } + else if(ch == STK_SET_DEVICE) { + 1d4c: 82 34 cpi r24, 0x42 ; 66 + 1d4e: 11 f4 brne .+4 ; 0x1d54 <main+0x54> + // SET DEVICE is ignored + getNch(20); + 1d50: 84 e1 ldi r24, 0x14 ; 20 + 1d52: 03 c0 rjmp .+6 ; 0x1d5a <main+0x5a> + } + else if(ch == STK_SET_DEVICE_EXT) { + 1d54: 85 34 cpi r24, 0x45 ; 69 + 1d56: 19 f4 brne .+6 ; 0x1d5e <main+0x5e> + // SET DEVICE EXT is ignored + getNch(5); + 1d58: 85 e0 ldi r24, 0x05 ; 5 + 1d5a: 0a d1 rcall .+532 ; 0x1f70 <verifySpace+0xc> + 1d5c: cf c0 rjmp .+414 ; 0x1efc <main+0x1fc> + } + else if(ch == STK_LOAD_ADDRESS) { + 1d5e: 85 35 cpi r24, 0x55 ; 85 + 1d60: a1 f4 brne .+40 ; 0x1d8a <main+0x8a> + // LOAD ADDRESS + address = getch(); + 1d62: de d0 rcall .+444 ; 0x1f20 <getch> + 1d64: 08 2f mov r16, r24 + 1d66: 10 e0 ldi r17, 0x00 ; 0 + 1d68: 10 93 01 02 sts 0x0201, r17 + 1d6c: 00 93 00 02 sts 0x0200, r16 + address = (address & 0xff) | (getch() << 8); + 1d70: d7 d0 rcall .+430 ; 0x1f20 <getch> + 1d72: 90 e0 ldi r25, 0x00 ; 0 + 1d74: 98 2f mov r25, r24 + 1d76: 88 27 eor r24, r24 + 1d78: 80 2b or r24, r16 + 1d7a: 91 2b or r25, r17 + address += address; // Convert from word address to byte address + 1d7c: 88 0f add r24, r24 + 1d7e: 99 1f adc r25, r25 + 1d80: 90 93 01 02 sts 0x0201, r25 + 1d84: 80 93 00 02 sts 0x0200, r24 + 1d88: b8 c0 rjmp .+368 ; 0x1efa <main+0x1fa> + verifySpace(); + } + else if(ch == STK_UNIVERSAL) { + 1d8a: 86 35 cpi r24, 0x56 ; 86 + 1d8c: 29 f4 brne .+10 ; 0x1d98 <main+0x98> + // UNIVERSAL command is ignored + getNch(4); + 1d8e: 84 e0 ldi r24, 0x04 ; 4 + 1d90: ef d0 rcall .+478 ; 0x1f70 <verifySpace+0xc> + putch(0x00); + 1d92: 80 e0 ldi r24, 0x00 ; 0 + 1d94: b6 d0 rcall .+364 ; 0x1f02 <putch> + 1d96: b2 c0 rjmp .+356 ; 0x1efc <main+0x1fc> + } + /* Write memory, length is big endian and is in bytes */ + else if(ch == STK_PROG_PAGE) { + 1d98: 84 36 cpi r24, 0x64 ; 100 + 1d9a: 09 f0 breq .+2 ; 0x1d9e <main+0x9e> + 1d9c: 6e c0 rjmp .+220 ; 0x1e7a <main+0x17a> + // PROGRAM PAGE - we support flash programming only, not EEPROM + uint8_t *bufPtr; + uint16_t addrPtr; + + getLen(); + 1d9e: d4 d0 rcall .+424 ; 0x1f48 <getLen> + + // Immediately start page erase - this will 4.5ms + boot_page_erase((uint16_t)(void*)address); + 1da0: e0 91 00 02 lds r30, 0x0200 + 1da4: f0 91 01 02 lds r31, 0x0201 + 1da8: 83 e0 ldi r24, 0x03 ; 3 + 1daa: 80 93 57 00 sts 0x0057, r24 + 1dae: e8 95 spm + 1db0: c0 e0 ldi r28, 0x00 ; 0 + 1db2: d1 e0 ldi r29, 0x01 ; 1 + + // While that is going on, read in page contents + bufPtr = buff; + do *bufPtr++ = getch(); + 1db4: b5 d0 rcall .+362 ; 0x1f20 <getch> + 1db6: 89 93 st Y+, r24 + while (--length); + 1db8: 80 91 02 02 lds r24, 0x0202 + 1dbc: 81 50 subi r24, 0x01 ; 1 + 1dbe: 80 93 02 02 sts 0x0202, r24 + 1dc2: 88 23 and r24, r24 + 1dc4: b9 f7 brne .-18 ; 0x1db4 <main+0xb4> + + // Read command terminator, start reply + verifySpace(); + 1dc6: ce d0 rcall .+412 ; 0x1f64 <verifySpace> + + // If only a partial page is to be programmed, the erase might not be complete. + // So check that here + boot_spm_busy_wait(); + 1dc8: 07 b6 in r0, 0x37 ; 55 + 1dca: 00 fc sbrc r0, 0 + 1dcc: fd cf rjmp .-6 ; 0x1dc8 <main+0xc8> + +#ifdef VIRTUAL_BOOT_PARTITION + if ((uint16_t)(void*)address == 0) { + 1dce: 80 91 00 02 lds r24, 0x0200 + 1dd2: 90 91 01 02 lds r25, 0x0201 + 1dd6: 89 2b or r24, r25 + 1dd8: 41 f5 brne .+80 ; 0x1e2a <main+0x12a> + // This is the reset vector page. We need to live-patch the code so the + // bootloader runs. + // + // Move RESET vector to WDT vector + uint16_t vect = buff[0] | (buff[1]<<8); + 1dda: 80 91 00 01 lds r24, 0x0100 + 1dde: 20 91 01 01 lds r18, 0x0101 + 1de2: 30 e0 ldi r19, 0x00 ; 0 + 1de4: 32 2f mov r19, r18 + 1de6: 22 27 eor r18, r18 + 1de8: 90 e0 ldi r25, 0x00 ; 0 + 1dea: 28 2b or r18, r24 + 1dec: 39 2b or r19, r25 + rstVect = vect; + 1dee: 30 93 05 02 sts 0x0205, r19 + 1df2: 20 93 04 02 sts 0x0204, r18 + wdtVect = buff[10] | (buff[11]<<8); + 1df6: 40 91 0a 01 lds r20, 0x010A + 1dfa: 80 91 0b 01 lds r24, 0x010B + 1dfe: 90 e0 ldi r25, 0x00 ; 0 + 1e00: 98 2f mov r25, r24 + 1e02: 88 27 eor r24, r24 + 1e04: 50 e0 ldi r21, 0x00 ; 0 + 1e06: 84 2b or r24, r20 + 1e08: 95 2b or r25, r21 + 1e0a: 90 93 07 02 sts 0x0207, r25 + 1e0e: 80 93 06 02 sts 0x0206, r24 + vect -= 4; // Instruction is a relative jump (rjmp), so recalculate. + 1e12: 24 50 subi r18, 0x04 ; 4 + 1e14: 30 40 sbci r19, 0x00 ; 0 + buff[10] = vect & 0xff; + 1e16: 20 93 0a 01 sts 0x010A, r18 + buff[11] = vect >> 8; + 1e1a: 23 2f mov r18, r19 + 1e1c: 33 27 eor r19, r19 + 1e1e: 20 93 0b 01 sts 0x010B, r18 + + // Add jump to bootloader at RESET vector + buff[0] = 0x7f; + 1e22: d0 92 00 01 sts 0x0100, r13 + buff[1] = 0xce; // rjmp 0x1d00 instruction + 1e26: f0 92 01 01 sts 0x0101, r15 + } +#endif + + // Copy buffer into programming buffer + bufPtr = buff; + addrPtr = (uint16_t)(void*)address; + 1e2a: 40 91 00 02 lds r20, 0x0200 + 1e2e: 50 91 01 02 lds r21, 0x0201 + 1e32: a0 e0 ldi r26, 0x00 ; 0 + 1e34: b1 e0 ldi r27, 0x01 ; 1 + ch = SPM_PAGESIZE / 2; + do { + uint16_t a; + a = *bufPtr++; + 1e36: 2c 91 ld r18, X + 1e38: 30 e0 ldi r19, 0x00 ; 0 + a |= (*bufPtr++) << 8; + 1e3a: 11 96 adiw r26, 0x01 ; 1 + 1e3c: 8c 91 ld r24, X + 1e3e: 11 97 sbiw r26, 0x01 ; 1 + 1e40: 90 e0 ldi r25, 0x00 ; 0 + 1e42: 98 2f mov r25, r24 + 1e44: 88 27 eor r24, r24 + 1e46: 82 2b or r24, r18 + 1e48: 93 2b or r25, r19 +#ifdef VIRTUAL_BOOT_PARTITION +#define rstVect (*(uint16_t*)(0x204)) +#define wdtVect (*(uint16_t*)(0x206)) +#endif +/* main program starts here */ +int main(void) { + 1e4a: 12 96 adiw r26, 0x02 ; 2 + ch = SPM_PAGESIZE / 2; + do { + uint16_t a; + a = *bufPtr++; + a |= (*bufPtr++) << 8; + boot_page_fill((uint16_t)(void*)addrPtr,a); + 1e4c: fa 01 movw r30, r20 + 1e4e: 0c 01 movw r0, r24 + 1e50: c0 92 57 00 sts 0x0057, r12 + 1e54: e8 95 spm + 1e56: 11 24 eor r1, r1 + addrPtr += 2; + 1e58: 4e 5f subi r20, 0xFE ; 254 + 1e5a: 5f 4f sbci r21, 0xFF ; 255 + } while (--ch); + 1e5c: f1 e0 ldi r31, 0x01 ; 1 + 1e5e: a0 34 cpi r26, 0x40 ; 64 + 1e60: bf 07 cpc r27, r31 + 1e62: 49 f7 brne .-46 ; 0x1e36 <main+0x136> + + // Write from programming buffer + boot_page_write((uint16_t)(void*)address); + 1e64: e0 91 00 02 lds r30, 0x0200 + 1e68: f0 91 01 02 lds r31, 0x0201 + 1e6c: e0 92 57 00 sts 0x0057, r14 + 1e70: e8 95 spm + boot_spm_busy_wait(); + 1e72: 07 b6 in r0, 0x37 ; 55 + 1e74: 00 fc sbrc r0, 0 + 1e76: fd cf rjmp .-6 ; 0x1e72 <main+0x172> + 1e78: 41 c0 rjmp .+130 ; 0x1efc <main+0x1fc> + boot_rww_enable(); +#endif + + } + /* Read memory block mode, length is big endian. */ + else if(ch == STK_READ_PAGE) { + 1e7a: 84 37 cpi r24, 0x74 ; 116 + 1e7c: 89 f5 brne .+98 ; 0x1ee0 <main+0x1e0> + // READ PAGE - we only read flash + getLen(); + 1e7e: 64 d0 rcall .+200 ; 0x1f48 <getLen> + verifySpace(); + 1e80: 71 d0 rcall .+226 ; 0x1f64 <verifySpace> +#ifdef VIRTUAL_BOOT_PARTITION + do { + // Undo vector patch in bottom page so verify passes + if (address == 0) ch=rstVect & 0xff; + 1e82: e0 91 00 02 lds r30, 0x0200 + 1e86: f0 91 01 02 lds r31, 0x0201 + 1e8a: 30 97 sbiw r30, 0x00 ; 0 + 1e8c: 19 f4 brne .+6 ; 0x1e94 <main+0x194> + 1e8e: 20 91 04 02 lds r18, 0x0204 + 1e92: 13 c0 rjmp .+38 ; 0x1eba <main+0x1ba> + else if (address == 1) ch=rstVect >> 8; + 1e94: e1 30 cpi r30, 0x01 ; 1 + 1e96: f1 05 cpc r31, r1 + 1e98: 19 f4 brne .+6 ; 0x1ea0 <main+0x1a0> + 1e9a: 20 91 05 02 lds r18, 0x0205 + 1e9e: 0d c0 rjmp .+26 ; 0x1eba <main+0x1ba> + else if (address == 10) ch=wdtVect & 0xff; + 1ea0: ea 30 cpi r30, 0x0A ; 10 + 1ea2: f1 05 cpc r31, r1 + 1ea4: 19 f4 brne .+6 ; 0x1eac <main+0x1ac> + 1ea6: 20 91 06 02 lds r18, 0x0206 + 1eaa: 07 c0 rjmp .+14 ; 0x1eba <main+0x1ba> + else if (address == 11) ch=wdtVect >> 8; + 1eac: eb 30 cpi r30, 0x0B ; 11 + 1eae: f1 05 cpc r31, r1 + 1eb0: 19 f4 brne .+6 ; 0x1eb8 <main+0x1b8> + 1eb2: 20 91 07 02 lds r18, 0x0207 + 1eb6: 01 c0 rjmp .+2 ; 0x1eba <main+0x1ba> + else ch = pgm_read_byte_near(address); + 1eb8: 24 91 lpm r18, Z+ + address++; + 1eba: 80 91 00 02 lds r24, 0x0200 + 1ebe: 90 91 01 02 lds r25, 0x0201 + 1ec2: 01 96 adiw r24, 0x01 ; 1 + 1ec4: 90 93 01 02 sts 0x0201, r25 + 1ec8: 80 93 00 02 sts 0x0200, r24 + putch(ch); + 1ecc: 82 2f mov r24, r18 + 1ece: 19 d0 rcall .+50 ; 0x1f02 <putch> + } while (--length); + 1ed0: 80 91 02 02 lds r24, 0x0202 + 1ed4: 81 50 subi r24, 0x01 ; 1 + 1ed6: 80 93 02 02 sts 0x0202, r24 + 1eda: 88 23 and r24, r24 + 1edc: 91 f6 brne .-92 ; 0x1e82 <main+0x182> + 1ede: 0e c0 rjmp .+28 ; 0x1efc <main+0x1fc> + while (--length); +#endif + } + + /* Get device signature bytes */ + else if(ch == STK_READ_SIGN) { + 1ee0: 85 37 cpi r24, 0x75 ; 117 + 1ee2: 39 f4 brne .+14 ; 0x1ef2 <main+0x1f2> + // READ SIGN - return what Avrdude wants to hear + verifySpace(); + 1ee4: 3f d0 rcall .+126 ; 0x1f64 <verifySpace> + putch(SIGNATURE_0); + 1ee6: 8e e1 ldi r24, 0x1E ; 30 + 1ee8: 0c d0 rcall .+24 ; 0x1f02 <putch> + putch(SIGNATURE_1); + 1eea: 83 e9 ldi r24, 0x93 ; 147 + 1eec: 0a d0 rcall .+20 ; 0x1f02 <putch> + putch(SIGNATURE_2); + 1eee: 8c e0 ldi r24, 0x0C ; 12 + 1ef0: 51 cf rjmp .-350 ; 0x1d94 <main+0x94> + } + else if (ch == 'Q') { + 1ef2: 81 35 cpi r24, 0x51 ; 81 + 1ef4: 11 f4 brne .+4 ; 0x1efa <main+0x1fa> + // Adaboot no-wait mod + watchdogConfig(WATCHDOG_16MS); + 1ef6: 88 e0 ldi r24, 0x08 ; 8 + 1ef8: 2c d0 rcall .+88 ; 0x1f52 <watchdogConfig> + verifySpace(); + } + else { + // This covers the response to commands like STK_ENTER_PROGMODE + verifySpace(); + 1efa: 34 d0 rcall .+104 ; 0x1f64 <verifySpace> + } + putch(STK_OK); + 1efc: 80 e1 ldi r24, 0x10 ; 16 + 1efe: 01 d0 rcall .+2 ; 0x1f02 <putch> + 1f00: 1e cf rjmp .-452 ; 0x1d3e <main+0x3e> + +00001f02 <putch>: +void putch(char ch) { +#ifndef SOFT_UART + while (!(UCSR0A & _BV(UDRE0))); + UDR0 = ch; +#else + __asm__ __volatile__ ( + 1f02: 2a e0 ldi r18, 0x0A ; 10 + 1f04: 30 e0 ldi r19, 0x00 ; 0 + 1f06: 80 95 com r24 + 1f08: 08 94 sec + 1f0a: 10 f4 brcc .+4 ; 0x1f10 <putch+0xe> + 1f0c: da 98 cbi 0x1b, 2 ; 27 + 1f0e: 02 c0 rjmp .+4 ; 0x1f14 <putch+0x12> + 1f10: da 9a sbi 0x1b, 2 ; 27 + 1f12: 00 00 nop + 1f14: 15 d0 rcall .+42 ; 0x1f40 <uartDelay> + 1f16: 14 d0 rcall .+40 ; 0x1f40 <uartDelay> + 1f18: 86 95 lsr r24 + 1f1a: 2a 95 dec r18 + 1f1c: b1 f7 brne .-20 ; 0x1f0a <putch+0x8> + [uartBit] "I" (UART_TX_BIT) + : + "r25" + ); +#endif +} + 1f1e: 08 95 ret + +00001f20 <getch>: + return getch(); +} + +// Watchdog functions. These are only safe with interrupts turned off. +void watchdogReset() { + __asm__ __volatile__ ( + 1f20: a8 95 wdr +#ifdef LED_DATA_FLASH + LED_PIN |= _BV(LED); +#endif + + return ch; +} + 1f22: 29 e0 ldi r18, 0x09 ; 9 + 1f24: 30 e0 ldi r19, 0x00 ; 0 + 1f26: cb 99 sbic 0x19, 3 ; 25 + 1f28: fe cf rjmp .-4 ; 0x1f26 <getch+0x6> + 1f2a: 0a d0 rcall .+20 ; 0x1f40 <uartDelay> + 1f2c: 09 d0 rcall .+18 ; 0x1f40 <uartDelay> + 1f2e: 08 d0 rcall .+16 ; 0x1f40 <uartDelay> + 1f30: 88 94 clc + 1f32: cb 99 sbic 0x19, 3 ; 25 + 1f34: 08 94 sec + 1f36: 2a 95 dec r18 + 1f38: 11 f0 breq .+4 ; 0x1f3e <getch+0x1e> + 1f3a: 87 95 ror r24 + 1f3c: f7 cf rjmp .-18 ; 0x1f2c <getch+0xc> + 1f3e: 08 95 ret + +00001f40 <uartDelay>: +#if UART_B_VALUE > 255 +#error Baud rate too slow for soft UART +#endif + +void uartDelay() { + __asm__ __volatile__ ( + 1f40: 9e e0 ldi r25, 0x0E ; 14 + 1f42: 9a 95 dec r25 + 1f44: f1 f7 brne .-4 ; 0x1f42 <uartDelay+0x2> + 1f46: 08 95 ret + +00001f48 <getLen>: + } while (--count); +} +#endif + +uint8_t getLen() { + getch(); + 1f48: eb df rcall .-42 ; 0x1f20 <getch> + length = getch(); + 1f4a: ea df rcall .-44 ; 0x1f20 <getch> + 1f4c: 80 93 02 02 sts 0x0202, r24 + return getch(); +} + 1f50: e7 cf rjmp .-50 ; 0x1f20 <getch> + +00001f52 <watchdogConfig>: + "wdr\n" + ); +} + +void watchdogConfig(uint8_t x) { + WDTCSR = _BV(WDCE) | _BV(WDE); + 1f52: 98 e1 ldi r25, 0x18 ; 24 + 1f54: 91 bd out 0x21, r25 ; 33 + WDTCSR = x; + 1f56: 81 bd out 0x21, r24 ; 33 +} + 1f58: 08 95 ret + +00001f5a <appStart>: + +void appStart() { + watchdogConfig(WATCHDOG_OFF); + 1f5a: 80 e0 ldi r24, 0x00 ; 0 + 1f5c: fa df rcall .-12 ; 0x1f52 <watchdogConfig> + __asm__ __volatile__ ( + 1f5e: e5 e0 ldi r30, 0x05 ; 5 + 1f60: ff 27 eor r31, r31 + 1f62: 09 94 ijmp + +00001f64 <verifySpace>: + do getch(); while (--count); + verifySpace(); +} + +void verifySpace() { + if (getch() != CRC_EOP) appStart(); + 1f64: dd df rcall .-70 ; 0x1f20 <getch> + 1f66: 80 32 cpi r24, 0x20 ; 32 + 1f68: 09 f0 breq .+2 ; 0x1f6c <verifySpace+0x8> + 1f6a: f7 df rcall .-18 ; 0x1f5a <appStart> + putch(STK_INSYNC); + 1f6c: 84 e1 ldi r24, 0x14 ; 20 +} + 1f6e: c9 cf rjmp .-110 ; 0x1f02 <putch> + ::[count] "M" (UART_B_VALUE) + ); +} +#endif + +void getNch(uint8_t count) { + 1f70: 1f 93 push r17 + 1f72: 18 2f mov r17, r24 + +00001f74 <getNch>: + do getch(); while (--count); + 1f74: d5 df rcall .-86 ; 0x1f20 <getch> + 1f76: 11 50 subi r17, 0x01 ; 1 + 1f78: e9 f7 brne .-6 ; 0x1f74 <getNch> + verifySpace(); + 1f7a: f4 df rcall .-24 ; 0x1f64 <verifySpace> +} + 1f7c: 1f 91 pop r17 + 1f7e: 08 95 ret diff --git a/test/ardmake/hardware/bootloaders/optiboot/optiboot_pro_16MHz.hex b/test/ardmake/hardware/bootloaders/optiboot/optiboot_pro_16MHz.hex new file mode 100644 index 0000000..1e93414 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/optiboot/optiboot_pro_16MHz.hex @@ -0,0 +1,33 @@ +:103E000085E08093810082E08093C00088E1809308
+:103E1000C10086E08093C20080E18093C40084B733
+:103E200014BE81FFD0D08DE0C8D0259A86E020E373
+:103E30003CEF91E0309385002093840096BBB09BCB
+:103E4000FECF1D9AA8958150A9F7DD24D394A5E053
+:103E5000EA2EF1E1FF2EA4D0813421F481E0BED01E
+:103E600083E024C0823411F484E103C0853419F462
+:103E700085E0B4D08AC08535A1F492D0082F10E037
+:103E800010930102009300028BD090E0982F8827B6
+:103E9000802B912B880F991F909301028093000231
+:103EA00073C0863529F484E099D080E071D06DC06C
+:103EB000843609F043C07CD0E0910002F091010209
+:103EC00083E080935700E895C0E0D1E069D0899302
+:103ED000809102028150809302028823B9F778D042
+:103EE00007B600FCFDCF4091000250910102A0E016
+:103EF000B1E02C9130E011968C91119790E0982FC1
+:103F00008827822B932B1296FA010C01D09257002E
+:103F1000E89511244E5F5F4FF1E0A038BF0749F7E5
+:103F2000E0910002F0910102E0925700E89507B697
+:103F300000FCFDCFF0925700E89527C08437B9F414
+:103F400037D046D0E0910002F09101023196F09313
+:103F50000102E09300023197E4918E2F19D08091F5
+:103F60000202815080930202882361F70EC08537D8
+:103F700039F42ED08EE10CD084E90AD086E096CFB9
+:103F8000813511F488E019D023D080E101D063CFCE
+:103F9000982F8091C00085FFFCCF9093C6000895B4
+:103FA000A8958091C00087FFFCCF8091C60008953E
+:103FB000F7DFF6DF80930202F3CFE0E6F0E098E16E
+:103FC00090838083089580E0F8DFEE27FF2709942F
+:103FD000E7DF803209F0F7DF84E1DACF1F93182F93
+:0C3FE000DFDF1150E9F7F4DF1F910895B6
+:0400000300003E00BB
+:00000001FF
diff --git a/test/ardmake/hardware/bootloaders/optiboot/optiboot_pro_16MHz.lst b/test/ardmake/hardware/bootloaders/optiboot/optiboot_pro_16MHz.lst new file mode 100644 index 0000000..9920a76 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/optiboot/optiboot_pro_16MHz.lst @@ -0,0 +1,520 @@ + +optiboot_pro_16MHz.elf: file format elf32-avr + +Sections: +Idx Name Size VMA LMA File off Algn + 0 .text 000001ec 00003e00 00003e00 00000054 2**1 + CONTENTS, ALLOC, LOAD, READONLY, CODE + 1 .debug_aranges 00000028 00000000 00000000 00000240 2**0 + CONTENTS, READONLY, DEBUGGING + 2 .debug_pubnames 0000006a 00000000 00000000 00000268 2**0 + CONTENTS, READONLY, DEBUGGING + 3 .debug_info 00000269 00000000 00000000 000002d2 2**0 + CONTENTS, READONLY, DEBUGGING + 4 .debug_abbrev 00000196 00000000 00000000 0000053b 2**0 + CONTENTS, READONLY, DEBUGGING + 5 .debug_line 000003d3 00000000 00000000 000006d1 2**0 + CONTENTS, READONLY, DEBUGGING + 6 .debug_frame 00000090 00000000 00000000 00000aa4 2**2 + CONTENTS, READONLY, DEBUGGING + 7 .debug_str 00000135 00000000 00000000 00000b34 2**0 + CONTENTS, READONLY, DEBUGGING + 8 .debug_loc 000001d1 00000000 00000000 00000c69 2**0 + CONTENTS, READONLY, DEBUGGING + 9 .debug_ranges 00000068 00000000 00000000 00000e3a 2**0 + CONTENTS, READONLY, DEBUGGING + +Disassembly of section .text: + +00003e00 <main>: +#ifdef VIRTUAL_BOOT_PARTITION +#define rstVect (*(uint16_t*)(0x204)) +#define wdtVect (*(uint16_t*)(0x206)) +#endif +/* main program starts here */ +int main(void) { + 3e00: 85 e0 ldi r24, 0x05 ; 5 + 3e02: 80 93 81 00 sts 0x0081, r24 +#if LED_START_FLASHES > 0 + // Set up Timer 1 for timeout counter + TCCR1B = _BV(CS12) | _BV(CS10); // div 1024 +#endif +#ifndef SOFT_UART + UCSR0A = _BV(U2X0); //Double speed mode USART0 + 3e06: 82 e0 ldi r24, 0x02 ; 2 + 3e08: 80 93 c0 00 sts 0x00C0, r24 + UCSR0B = _BV(RXEN0) | _BV(TXEN0); + 3e0c: 88 e1 ldi r24, 0x18 ; 24 + 3e0e: 80 93 c1 00 sts 0x00C1, r24 + UCSR0C = _BV(UCSZ00) | _BV(UCSZ01); + 3e12: 86 e0 ldi r24, 0x06 ; 6 + 3e14: 80 93 c2 00 sts 0x00C2, r24 + UBRR0L = (uint8_t)( (F_CPU + BAUD_RATE * 4L) / (BAUD_RATE * 8L) - 1 ); + 3e18: 80 e1 ldi r24, 0x10 ; 16 + 3e1a: 80 93 c4 00 sts 0x00C4, r24 +#endif + + // Adaboot no-wait mod + ch = MCUSR; + 3e1e: 84 b7 in r24, 0x34 ; 52 + MCUSR = 0; + 3e20: 14 be out 0x34, r1 ; 52 + if (!(ch & _BV(EXTRF))) appStart(); + 3e22: 81 ff sbrs r24, 1 + 3e24: d0 d0 rcall .+416 ; 0x3fc6 <appStart> + + // Set up watchdog to trigger after 500ms + watchdogConfig(WATCHDOG_500MS); + 3e26: 8d e0 ldi r24, 0x0D ; 13 + 3e28: c8 d0 rcall .+400 ; 0x3fba <watchdogConfig> + + /* Set LED pin as output */ + LED_DDR |= _BV(LED); + 3e2a: 25 9a sbi 0x04, 5 ; 4 + 3e2c: 86 e0 ldi r24, 0x06 ; 6 +} + +#if LED_START_FLASHES > 0 +void flash_led(uint8_t count) { + do { + TCNT1 = -(F_CPU/(1024*16)); + 3e2e: 20 e3 ldi r18, 0x30 ; 48 + 3e30: 3c ef ldi r19, 0xFC ; 252 + TIFR1 = _BV(TOV1); + 3e32: 91 e0 ldi r25, 0x01 ; 1 +} + +#if LED_START_FLASHES > 0 +void flash_led(uint8_t count) { + do { + TCNT1 = -(F_CPU/(1024*16)); + 3e34: 30 93 85 00 sts 0x0085, r19 + 3e38: 20 93 84 00 sts 0x0084, r18 + TIFR1 = _BV(TOV1); + 3e3c: 96 bb out 0x16, r25 ; 22 + while(!(TIFR1 & _BV(TOV1))); + 3e3e: b0 9b sbis 0x16, 0 ; 22 + 3e40: fe cf rjmp .-4 ; 0x3e3e <main+0x3e> + LED_PIN |= _BV(LED); + 3e42: 1d 9a sbi 0x03, 5 ; 3 + return getch(); +} + +// Watchdog functions. These are only safe with interrupts turned off. +void watchdogReset() { + __asm__ __volatile__ ( + 3e44: a8 95 wdr + TCNT1 = -(F_CPU/(1024*16)); + TIFR1 = _BV(TOV1); + while(!(TIFR1 & _BV(TOV1))); + LED_PIN |= _BV(LED); + watchdogReset(); + } while (--count); + 3e46: 81 50 subi r24, 0x01 ; 1 + 3e48: a9 f7 brne .-22 ; 0x3e34 <main+0x34> + /* get character from UART */ + ch = getch(); + + if(ch == STK_GET_PARAMETER) { + // GET PARAMETER returns a generic 0x03 reply - enough to keep Avrdude happy + getNch(1); + 3e4a: dd 24 eor r13, r13 + 3e4c: d3 94 inc r13 + boot_page_fill((uint16_t)(void*)addrPtr,a); + addrPtr += 2; + } while (--ch); + + // Write from programming buffer + boot_page_write((uint16_t)(void*)address); + 3e4e: a5 e0 ldi r26, 0x05 ; 5 + 3e50: ea 2e mov r14, r26 + boot_spm_busy_wait(); + +#if defined(RWWSRE) + // Reenable read access to flash + boot_rww_enable(); + 3e52: f1 e1 ldi r31, 0x11 ; 17 + 3e54: ff 2e mov r15, r31 +#endif + + /* Forever loop */ + for (;;) { + /* get character from UART */ + ch = getch(); + 3e56: a4 d0 rcall .+328 ; 0x3fa0 <getch> + + if(ch == STK_GET_PARAMETER) { + 3e58: 81 34 cpi r24, 0x41 ; 65 + 3e5a: 21 f4 brne .+8 ; 0x3e64 <main+0x64> + // GET PARAMETER returns a generic 0x03 reply - enough to keep Avrdude happy + getNch(1); + 3e5c: 81 e0 ldi r24, 0x01 ; 1 + 3e5e: be d0 rcall .+380 ; 0x3fdc <verifySpace+0xc> + putch(0x03); + 3e60: 83 e0 ldi r24, 0x03 ; 3 + 3e62: 24 c0 rjmp .+72 ; 0x3eac <main+0xac> + } + else if(ch == STK_SET_DEVICE) { + 3e64: 82 34 cpi r24, 0x42 ; 66 + 3e66: 11 f4 brne .+4 ; 0x3e6c <main+0x6c> + // SET DEVICE is ignored + getNch(20); + 3e68: 84 e1 ldi r24, 0x14 ; 20 + 3e6a: 03 c0 rjmp .+6 ; 0x3e72 <main+0x72> + } + else if(ch == STK_SET_DEVICE_EXT) { + 3e6c: 85 34 cpi r24, 0x45 ; 69 + 3e6e: 19 f4 brne .+6 ; 0x3e76 <main+0x76> + // SET DEVICE EXT is ignored + getNch(5); + 3e70: 85 e0 ldi r24, 0x05 ; 5 + 3e72: b4 d0 rcall .+360 ; 0x3fdc <verifySpace+0xc> + 3e74: 8a c0 rjmp .+276 ; 0x3f8a <main+0x18a> + } + else if(ch == STK_LOAD_ADDRESS) { + 3e76: 85 35 cpi r24, 0x55 ; 85 + 3e78: a1 f4 brne .+40 ; 0x3ea2 <main+0xa2> + // LOAD ADDRESS + address = getch(); + 3e7a: 92 d0 rcall .+292 ; 0x3fa0 <getch> + 3e7c: 08 2f mov r16, r24 + 3e7e: 10 e0 ldi r17, 0x00 ; 0 + 3e80: 10 93 01 02 sts 0x0201, r17 + 3e84: 00 93 00 02 sts 0x0200, r16 + address = (address & 0xff) | (getch() << 8); + 3e88: 8b d0 rcall .+278 ; 0x3fa0 <getch> + 3e8a: 90 e0 ldi r25, 0x00 ; 0 + 3e8c: 98 2f mov r25, r24 + 3e8e: 88 27 eor r24, r24 + 3e90: 80 2b or r24, r16 + 3e92: 91 2b or r25, r17 + address += address; // Convert from word address to byte address + 3e94: 88 0f add r24, r24 + 3e96: 99 1f adc r25, r25 + 3e98: 90 93 01 02 sts 0x0201, r25 + 3e9c: 80 93 00 02 sts 0x0200, r24 + 3ea0: 73 c0 rjmp .+230 ; 0x3f88 <main+0x188> + verifySpace(); + } + else if(ch == STK_UNIVERSAL) { + 3ea2: 86 35 cpi r24, 0x56 ; 86 + 3ea4: 29 f4 brne .+10 ; 0x3eb0 <main+0xb0> + // UNIVERSAL command is ignored + getNch(4); + 3ea6: 84 e0 ldi r24, 0x04 ; 4 + 3ea8: 99 d0 rcall .+306 ; 0x3fdc <verifySpace+0xc> + putch(0x00); + 3eaa: 80 e0 ldi r24, 0x00 ; 0 + 3eac: 71 d0 rcall .+226 ; 0x3f90 <putch> + 3eae: 6d c0 rjmp .+218 ; 0x3f8a <main+0x18a> + } + /* Write memory, length is big endian and is in bytes */ + else if(ch == STK_PROG_PAGE) { + 3eb0: 84 36 cpi r24, 0x64 ; 100 + 3eb2: 09 f0 breq .+2 ; 0x3eb6 <main+0xb6> + 3eb4: 43 c0 rjmp .+134 ; 0x3f3c <main+0x13c> + // PROGRAM PAGE - we support flash programming only, not EEPROM + uint8_t *bufPtr; + uint16_t addrPtr; + + getLen(); + 3eb6: 7c d0 rcall .+248 ; 0x3fb0 <getLen> + + // Immediately start page erase - this will 4.5ms + boot_page_erase((uint16_t)(void*)address); + 3eb8: e0 91 00 02 lds r30, 0x0200 + 3ebc: f0 91 01 02 lds r31, 0x0201 + 3ec0: 83 e0 ldi r24, 0x03 ; 3 + 3ec2: 80 93 57 00 sts 0x0057, r24 + 3ec6: e8 95 spm + 3ec8: c0 e0 ldi r28, 0x00 ; 0 + 3eca: d1 e0 ldi r29, 0x01 ; 1 + + // While that is going on, read in page contents + bufPtr = buff; + do *bufPtr++ = getch(); + 3ecc: 69 d0 rcall .+210 ; 0x3fa0 <getch> + 3ece: 89 93 st Y+, r24 + while (--length); + 3ed0: 80 91 02 02 lds r24, 0x0202 + 3ed4: 81 50 subi r24, 0x01 ; 1 + 3ed6: 80 93 02 02 sts 0x0202, r24 + 3eda: 88 23 and r24, r24 + 3edc: b9 f7 brne .-18 ; 0x3ecc <main+0xcc> + + // Read command terminator, start reply + verifySpace(); + 3ede: 78 d0 rcall .+240 ; 0x3fd0 <verifySpace> + + // If only a partial page is to be programmed, the erase might not be complete. + // So check that here + boot_spm_busy_wait(); + 3ee0: 07 b6 in r0, 0x37 ; 55 + 3ee2: 00 fc sbrc r0, 0 + 3ee4: fd cf rjmp .-6 ; 0x3ee0 <main+0xe0> + } +#endif + + // Copy buffer into programming buffer + bufPtr = buff; + addrPtr = (uint16_t)(void*)address; + 3ee6: 40 91 00 02 lds r20, 0x0200 + 3eea: 50 91 01 02 lds r21, 0x0201 + 3eee: a0 e0 ldi r26, 0x00 ; 0 + 3ef0: b1 e0 ldi r27, 0x01 ; 1 + ch = SPM_PAGESIZE / 2; + do { + uint16_t a; + a = *bufPtr++; + 3ef2: 2c 91 ld r18, X + 3ef4: 30 e0 ldi r19, 0x00 ; 0 + a |= (*bufPtr++) << 8; + 3ef6: 11 96 adiw r26, 0x01 ; 1 + 3ef8: 8c 91 ld r24, X + 3efa: 11 97 sbiw r26, 0x01 ; 1 + 3efc: 90 e0 ldi r25, 0x00 ; 0 + 3efe: 98 2f mov r25, r24 + 3f00: 88 27 eor r24, r24 + 3f02: 82 2b or r24, r18 + 3f04: 93 2b or r25, r19 +#ifdef VIRTUAL_BOOT_PARTITION +#define rstVect (*(uint16_t*)(0x204)) +#define wdtVect (*(uint16_t*)(0x206)) +#endif +/* main program starts here */ +int main(void) { + 3f06: 12 96 adiw r26, 0x02 ; 2 + ch = SPM_PAGESIZE / 2; + do { + uint16_t a; + a = *bufPtr++; + a |= (*bufPtr++) << 8; + boot_page_fill((uint16_t)(void*)addrPtr,a); + 3f08: fa 01 movw r30, r20 + 3f0a: 0c 01 movw r0, r24 + 3f0c: d0 92 57 00 sts 0x0057, r13 + 3f10: e8 95 spm + 3f12: 11 24 eor r1, r1 + addrPtr += 2; + 3f14: 4e 5f subi r20, 0xFE ; 254 + 3f16: 5f 4f sbci r21, 0xFF ; 255 + } while (--ch); + 3f18: f1 e0 ldi r31, 0x01 ; 1 + 3f1a: a0 38 cpi r26, 0x80 ; 128 + 3f1c: bf 07 cpc r27, r31 + 3f1e: 49 f7 brne .-46 ; 0x3ef2 <main+0xf2> + + // Write from programming buffer + boot_page_write((uint16_t)(void*)address); + 3f20: e0 91 00 02 lds r30, 0x0200 + 3f24: f0 91 01 02 lds r31, 0x0201 + 3f28: e0 92 57 00 sts 0x0057, r14 + 3f2c: e8 95 spm + boot_spm_busy_wait(); + 3f2e: 07 b6 in r0, 0x37 ; 55 + 3f30: 00 fc sbrc r0, 0 + 3f32: fd cf rjmp .-6 ; 0x3f2e <main+0x12e> + +#if defined(RWWSRE) + // Reenable read access to flash + boot_rww_enable(); + 3f34: f0 92 57 00 sts 0x0057, r15 + 3f38: e8 95 spm + 3f3a: 27 c0 rjmp .+78 ; 0x3f8a <main+0x18a> +#endif + + } + /* Read memory block mode, length is big endian. */ + else if(ch == STK_READ_PAGE) { + 3f3c: 84 37 cpi r24, 0x74 ; 116 + 3f3e: b9 f4 brne .+46 ; 0x3f6e <main+0x16e> + // READ PAGE - we only read flash + getLen(); + 3f40: 37 d0 rcall .+110 ; 0x3fb0 <getLen> + verifySpace(); + 3f42: 46 d0 rcall .+140 ; 0x3fd0 <verifySpace> + else ch = pgm_read_byte_near(address); + address++; + putch(ch); + } while (--length); +#else + do putch(pgm_read_byte_near(address++)); + 3f44: e0 91 00 02 lds r30, 0x0200 + 3f48: f0 91 01 02 lds r31, 0x0201 + 3f4c: 31 96 adiw r30, 0x01 ; 1 + 3f4e: f0 93 01 02 sts 0x0201, r31 + 3f52: e0 93 00 02 sts 0x0200, r30 + 3f56: 31 97 sbiw r30, 0x01 ; 1 + 3f58: e4 91 lpm r30, Z+ + 3f5a: 8e 2f mov r24, r30 + 3f5c: 19 d0 rcall .+50 ; 0x3f90 <putch> + while (--length); + 3f5e: 80 91 02 02 lds r24, 0x0202 + 3f62: 81 50 subi r24, 0x01 ; 1 + 3f64: 80 93 02 02 sts 0x0202, r24 + 3f68: 88 23 and r24, r24 + 3f6a: 61 f7 brne .-40 ; 0x3f44 <main+0x144> + 3f6c: 0e c0 rjmp .+28 ; 0x3f8a <main+0x18a> +#endif + } + + /* Get device signature bytes */ + else if(ch == STK_READ_SIGN) { + 3f6e: 85 37 cpi r24, 0x75 ; 117 + 3f70: 39 f4 brne .+14 ; 0x3f80 <main+0x180> + // READ SIGN - return what Avrdude wants to hear + verifySpace(); + 3f72: 2e d0 rcall .+92 ; 0x3fd0 <verifySpace> + putch(SIGNATURE_0); + 3f74: 8e e1 ldi r24, 0x1E ; 30 + 3f76: 0c d0 rcall .+24 ; 0x3f90 <putch> + putch(SIGNATURE_1); + 3f78: 84 e9 ldi r24, 0x94 ; 148 + 3f7a: 0a d0 rcall .+20 ; 0x3f90 <putch> + putch(SIGNATURE_2); + 3f7c: 86 e0 ldi r24, 0x06 ; 6 + 3f7e: 96 cf rjmp .-212 ; 0x3eac <main+0xac> + } + else if (ch == 'Q') { + 3f80: 81 35 cpi r24, 0x51 ; 81 + 3f82: 11 f4 brne .+4 ; 0x3f88 <main+0x188> + // Adaboot no-wait mod + watchdogConfig(WATCHDOG_16MS); + 3f84: 88 e0 ldi r24, 0x08 ; 8 + 3f86: 19 d0 rcall .+50 ; 0x3fba <watchdogConfig> + verifySpace(); + } + else { + // This covers the response to commands like STK_ENTER_PROGMODE + verifySpace(); + 3f88: 23 d0 rcall .+70 ; 0x3fd0 <verifySpace> + } + putch(STK_OK); + 3f8a: 80 e1 ldi r24, 0x10 ; 16 + 3f8c: 01 d0 rcall .+2 ; 0x3f90 <putch> + 3f8e: 63 cf rjmp .-314 ; 0x3e56 <main+0x56> + +00003f90 <putch>: + } +} + +void putch(char ch) { + 3f90: 98 2f mov r25, r24 +#ifndef SOFT_UART + while (!(UCSR0A & _BV(UDRE0))); + 3f92: 80 91 c0 00 lds r24, 0x00C0 + 3f96: 85 ff sbrs r24, 5 + 3f98: fc cf rjmp .-8 ; 0x3f92 <putch+0x2> + UDR0 = ch; + 3f9a: 90 93 c6 00 sts 0x00C6, r25 + [uartBit] "I" (UART_TX_BIT) + : + "r25" + ); +#endif +} + 3f9e: 08 95 ret + +00003fa0 <getch>: + return getch(); +} + +// Watchdog functions. These are only safe with interrupts turned off. +void watchdogReset() { + __asm__ __volatile__ ( + 3fa0: a8 95 wdr + [uartBit] "I" (UART_RX_BIT) + : + "r25" +); +#else + while(!(UCSR0A & _BV(RXC0))); + 3fa2: 80 91 c0 00 lds r24, 0x00C0 + 3fa6: 87 ff sbrs r24, 7 + 3fa8: fc cf rjmp .-8 ; 0x3fa2 <getch+0x2> + ch = UDR0; + 3faa: 80 91 c6 00 lds r24, 0x00C6 +#ifdef LED_DATA_FLASH + LED_PIN |= _BV(LED); +#endif + + return ch; +} + 3fae: 08 95 ret + +00003fb0 <getLen>: + } while (--count); +} +#endif + +uint8_t getLen() { + getch(); + 3fb0: f7 df rcall .-18 ; 0x3fa0 <getch> + length = getch(); + 3fb2: f6 df rcall .-20 ; 0x3fa0 <getch> + 3fb4: 80 93 02 02 sts 0x0202, r24 + return getch(); +} + 3fb8: f3 cf rjmp .-26 ; 0x3fa0 <getch> + +00003fba <watchdogConfig>: + "wdr\n" + ); +} + +void watchdogConfig(uint8_t x) { + WDTCSR = _BV(WDCE) | _BV(WDE); + 3fba: e0 e6 ldi r30, 0x60 ; 96 + 3fbc: f0 e0 ldi r31, 0x00 ; 0 + 3fbe: 98 e1 ldi r25, 0x18 ; 24 + 3fc0: 90 83 st Z, r25 + WDTCSR = x; + 3fc2: 80 83 st Z, r24 +} + 3fc4: 08 95 ret + +00003fc6 <appStart>: + +void appStart() { + watchdogConfig(WATCHDOG_OFF); + 3fc6: 80 e0 ldi r24, 0x00 ; 0 + 3fc8: f8 df rcall .-16 ; 0x3fba <watchdogConfig> + __asm__ __volatile__ ( + 3fca: ee 27 eor r30, r30 + 3fcc: ff 27 eor r31, r31 + 3fce: 09 94 ijmp + +00003fd0 <verifySpace>: + do getch(); while (--count); + verifySpace(); +} + +void verifySpace() { + if (getch() != CRC_EOP) appStart(); + 3fd0: e7 df rcall .-50 ; 0x3fa0 <getch> + 3fd2: 80 32 cpi r24, 0x20 ; 32 + 3fd4: 09 f0 breq .+2 ; 0x3fd8 <verifySpace+0x8> + 3fd6: f7 df rcall .-18 ; 0x3fc6 <appStart> + putch(STK_INSYNC); + 3fd8: 84 e1 ldi r24, 0x14 ; 20 +} + 3fda: da cf rjmp .-76 ; 0x3f90 <putch> + ::[count] "M" (UART_B_VALUE) + ); +} +#endif + +void getNch(uint8_t count) { + 3fdc: 1f 93 push r17 + 3fde: 18 2f mov r17, r24 + +00003fe0 <getNch>: + do getch(); while (--count); + 3fe0: df df rcall .-66 ; 0x3fa0 <getch> + 3fe2: 11 50 subi r17, 0x01 ; 1 + 3fe4: e9 f7 brne .-6 ; 0x3fe0 <getNch> + verifySpace(); + 3fe6: f4 df rcall .-24 ; 0x3fd0 <verifySpace> +} + 3fe8: 1f 91 pop r17 + 3fea: 08 95 ret diff --git a/test/ardmake/hardware/bootloaders/optiboot/optiboot_pro_20mhz.hex b/test/ardmake/hardware/bootloaders/optiboot/optiboot_pro_20mhz.hex new file mode 100644 index 0000000..19c9ae4 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/optiboot/optiboot_pro_20mhz.hex @@ -0,0 +1,33 @@ +:103E000085E08093810082E08093C00088E1809308
+:103E1000C10086E08093C20085E18093C40084B72E
+:103E200014BE81FFD0D08DE0C8D0259A86E02CE367
+:103E30003BEF91E0309385002093840096BBB09BCC
+:103E4000FECF1D9AA8958150A9F7DD24D394A5E053
+:103E5000EA2EF1E1FF2EA4D0813421F481E0BED01E
+:103E600083E024C0823411F484E103C0853419F462
+:103E700085E0B4D08AC08535A1F492D0082F10E037
+:103E800010930102009300028BD090E0982F8827B6
+:103E9000802B912B880F991F909301028093000231
+:103EA00073C0863529F484E099D080E071D06DC06C
+:103EB000843609F043C07CD0E0910002F091010209
+:103EC00083E080935700E895C0E0D1E069D0899302
+:103ED000809102028150809302028823B9F778D042
+:103EE00007B600FCFDCF4091000250910102A0E016
+:103EF000B1E02C9130E011968C91119790E0982FC1
+:103F00008827822B932B1296FA010C01D09257002E
+:103F1000E89511244E5F5F4FF1E0A038BF0749F7E5
+:103F2000E0910002F0910102E0925700E89507B697
+:103F300000FCFDCFF0925700E89527C08437B9F414
+:103F400037D046D0E0910002F09101023196F09313
+:103F50000102E09300023197E4918E2F19D08091F5
+:103F60000202815080930202882361F70EC08537D8
+:103F700039F42ED08EE10CD084E90AD086E096CFB9
+:103F8000813511F488E019D023D080E101D063CFCE
+:103F9000982F8091C00085FFFCCF9093C6000895B4
+:103FA000A8958091C00087FFFCCF8091C60008953E
+:103FB000F7DFF6DF80930202F3CFE0E6F0E098E16E
+:103FC00090838083089580E0F8DFEE27FF2709942F
+:103FD000E7DF803209F0F7DF84E1DACF1F93182F93
+:0C3FE000DFDF1150E9F7F4DF1F910895B6
+:0400000300003E00BB
+:00000001FF
diff --git a/test/ardmake/hardware/bootloaders/optiboot/optiboot_pro_20mhz.lst b/test/ardmake/hardware/bootloaders/optiboot/optiboot_pro_20mhz.lst new file mode 100644 index 0000000..62178d3 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/optiboot/optiboot_pro_20mhz.lst @@ -0,0 +1,520 @@ + +optiboot_pro_20mhz.elf: file format elf32-avr + +Sections: +Idx Name Size VMA LMA File off Algn + 0 .text 000001ec 00003e00 00003e00 00000054 2**1 + CONTENTS, ALLOC, LOAD, READONLY, CODE + 1 .debug_aranges 00000028 00000000 00000000 00000240 2**0 + CONTENTS, READONLY, DEBUGGING + 2 .debug_pubnames 0000006a 00000000 00000000 00000268 2**0 + CONTENTS, READONLY, DEBUGGING + 3 .debug_info 00000269 00000000 00000000 000002d2 2**0 + CONTENTS, READONLY, DEBUGGING + 4 .debug_abbrev 00000196 00000000 00000000 0000053b 2**0 + CONTENTS, READONLY, DEBUGGING + 5 .debug_line 000003d3 00000000 00000000 000006d1 2**0 + CONTENTS, READONLY, DEBUGGING + 6 .debug_frame 00000090 00000000 00000000 00000aa4 2**2 + CONTENTS, READONLY, DEBUGGING + 7 .debug_str 00000135 00000000 00000000 00000b34 2**0 + CONTENTS, READONLY, DEBUGGING + 8 .debug_loc 000001d1 00000000 00000000 00000c69 2**0 + CONTENTS, READONLY, DEBUGGING + 9 .debug_ranges 00000068 00000000 00000000 00000e3a 2**0 + CONTENTS, READONLY, DEBUGGING + +Disassembly of section .text: + +00003e00 <main>: +#ifdef VIRTUAL_BOOT_PARTITION +#define rstVect (*(uint16_t*)(0x204)) +#define wdtVect (*(uint16_t*)(0x206)) +#endif +/* main program starts here */ +int main(void) { + 3e00: 85 e0 ldi r24, 0x05 ; 5 + 3e02: 80 93 81 00 sts 0x0081, r24 +#if LED_START_FLASHES > 0 + // Set up Timer 1 for timeout counter + TCCR1B = _BV(CS12) | _BV(CS10); // div 1024 +#endif +#ifndef SOFT_UART + UCSR0A = _BV(U2X0); //Double speed mode USART0 + 3e06: 82 e0 ldi r24, 0x02 ; 2 + 3e08: 80 93 c0 00 sts 0x00C0, r24 + UCSR0B = _BV(RXEN0) | _BV(TXEN0); + 3e0c: 88 e1 ldi r24, 0x18 ; 24 + 3e0e: 80 93 c1 00 sts 0x00C1, r24 + UCSR0C = _BV(UCSZ00) | _BV(UCSZ01); + 3e12: 86 e0 ldi r24, 0x06 ; 6 + 3e14: 80 93 c2 00 sts 0x00C2, r24 + UBRR0L = (uint8_t)( (F_CPU + BAUD_RATE * 4L) / (BAUD_RATE * 8L) - 1 ); + 3e18: 85 e1 ldi r24, 0x15 ; 21 + 3e1a: 80 93 c4 00 sts 0x00C4, r24 +#endif + + // Adaboot no-wait mod + ch = MCUSR; + 3e1e: 84 b7 in r24, 0x34 ; 52 + MCUSR = 0; + 3e20: 14 be out 0x34, r1 ; 52 + if (!(ch & _BV(EXTRF))) appStart(); + 3e22: 81 ff sbrs r24, 1 + 3e24: d0 d0 rcall .+416 ; 0x3fc6 <appStart> + + // Set up watchdog to trigger after 500ms + watchdogConfig(WATCHDOG_500MS); + 3e26: 8d e0 ldi r24, 0x0D ; 13 + 3e28: c8 d0 rcall .+400 ; 0x3fba <watchdogConfig> + + /* Set LED pin as output */ + LED_DDR |= _BV(LED); + 3e2a: 25 9a sbi 0x04, 5 ; 4 + 3e2c: 86 e0 ldi r24, 0x06 ; 6 +} + +#if LED_START_FLASHES > 0 +void flash_led(uint8_t count) { + do { + TCNT1 = -(F_CPU/(1024*16)); + 3e2e: 2c e3 ldi r18, 0x3C ; 60 + 3e30: 3b ef ldi r19, 0xFB ; 251 + TIFR1 = _BV(TOV1); + 3e32: 91 e0 ldi r25, 0x01 ; 1 +} + +#if LED_START_FLASHES > 0 +void flash_led(uint8_t count) { + do { + TCNT1 = -(F_CPU/(1024*16)); + 3e34: 30 93 85 00 sts 0x0085, r19 + 3e38: 20 93 84 00 sts 0x0084, r18 + TIFR1 = _BV(TOV1); + 3e3c: 96 bb out 0x16, r25 ; 22 + while(!(TIFR1 & _BV(TOV1))); + 3e3e: b0 9b sbis 0x16, 0 ; 22 + 3e40: fe cf rjmp .-4 ; 0x3e3e <main+0x3e> + LED_PIN |= _BV(LED); + 3e42: 1d 9a sbi 0x03, 5 ; 3 + return getch(); +} + +// Watchdog functions. These are only safe with interrupts turned off. +void watchdogReset() { + __asm__ __volatile__ ( + 3e44: a8 95 wdr + TCNT1 = -(F_CPU/(1024*16)); + TIFR1 = _BV(TOV1); + while(!(TIFR1 & _BV(TOV1))); + LED_PIN |= _BV(LED); + watchdogReset(); + } while (--count); + 3e46: 81 50 subi r24, 0x01 ; 1 + 3e48: a9 f7 brne .-22 ; 0x3e34 <main+0x34> + /* get character from UART */ + ch = getch(); + + if(ch == STK_GET_PARAMETER) { + // GET PARAMETER returns a generic 0x03 reply - enough to keep Avrdude happy + getNch(1); + 3e4a: dd 24 eor r13, r13 + 3e4c: d3 94 inc r13 + boot_page_fill((uint16_t)(void*)addrPtr,a); + addrPtr += 2; + } while (--ch); + + // Write from programming buffer + boot_page_write((uint16_t)(void*)address); + 3e4e: a5 e0 ldi r26, 0x05 ; 5 + 3e50: ea 2e mov r14, r26 + boot_spm_busy_wait(); + +#if defined(RWWSRE) + // Reenable read access to flash + boot_rww_enable(); + 3e52: f1 e1 ldi r31, 0x11 ; 17 + 3e54: ff 2e mov r15, r31 +#endif + + /* Forever loop */ + for (;;) { + /* get character from UART */ + ch = getch(); + 3e56: a4 d0 rcall .+328 ; 0x3fa0 <getch> + + if(ch == STK_GET_PARAMETER) { + 3e58: 81 34 cpi r24, 0x41 ; 65 + 3e5a: 21 f4 brne .+8 ; 0x3e64 <main+0x64> + // GET PARAMETER returns a generic 0x03 reply - enough to keep Avrdude happy + getNch(1); + 3e5c: 81 e0 ldi r24, 0x01 ; 1 + 3e5e: be d0 rcall .+380 ; 0x3fdc <verifySpace+0xc> + putch(0x03); + 3e60: 83 e0 ldi r24, 0x03 ; 3 + 3e62: 24 c0 rjmp .+72 ; 0x3eac <main+0xac> + } + else if(ch == STK_SET_DEVICE) { + 3e64: 82 34 cpi r24, 0x42 ; 66 + 3e66: 11 f4 brne .+4 ; 0x3e6c <main+0x6c> + // SET DEVICE is ignored + getNch(20); + 3e68: 84 e1 ldi r24, 0x14 ; 20 + 3e6a: 03 c0 rjmp .+6 ; 0x3e72 <main+0x72> + } + else if(ch == STK_SET_DEVICE_EXT) { + 3e6c: 85 34 cpi r24, 0x45 ; 69 + 3e6e: 19 f4 brne .+6 ; 0x3e76 <main+0x76> + // SET DEVICE EXT is ignored + getNch(5); + 3e70: 85 e0 ldi r24, 0x05 ; 5 + 3e72: b4 d0 rcall .+360 ; 0x3fdc <verifySpace+0xc> + 3e74: 8a c0 rjmp .+276 ; 0x3f8a <main+0x18a> + } + else if(ch == STK_LOAD_ADDRESS) { + 3e76: 85 35 cpi r24, 0x55 ; 85 + 3e78: a1 f4 brne .+40 ; 0x3ea2 <main+0xa2> + // LOAD ADDRESS + address = getch(); + 3e7a: 92 d0 rcall .+292 ; 0x3fa0 <getch> + 3e7c: 08 2f mov r16, r24 + 3e7e: 10 e0 ldi r17, 0x00 ; 0 + 3e80: 10 93 01 02 sts 0x0201, r17 + 3e84: 00 93 00 02 sts 0x0200, r16 + address = (address & 0xff) | (getch() << 8); + 3e88: 8b d0 rcall .+278 ; 0x3fa0 <getch> + 3e8a: 90 e0 ldi r25, 0x00 ; 0 + 3e8c: 98 2f mov r25, r24 + 3e8e: 88 27 eor r24, r24 + 3e90: 80 2b or r24, r16 + 3e92: 91 2b or r25, r17 + address += address; // Convert from word address to byte address + 3e94: 88 0f add r24, r24 + 3e96: 99 1f adc r25, r25 + 3e98: 90 93 01 02 sts 0x0201, r25 + 3e9c: 80 93 00 02 sts 0x0200, r24 + 3ea0: 73 c0 rjmp .+230 ; 0x3f88 <main+0x188> + verifySpace(); + } + else if(ch == STK_UNIVERSAL) { + 3ea2: 86 35 cpi r24, 0x56 ; 86 + 3ea4: 29 f4 brne .+10 ; 0x3eb0 <main+0xb0> + // UNIVERSAL command is ignored + getNch(4); + 3ea6: 84 e0 ldi r24, 0x04 ; 4 + 3ea8: 99 d0 rcall .+306 ; 0x3fdc <verifySpace+0xc> + putch(0x00); + 3eaa: 80 e0 ldi r24, 0x00 ; 0 + 3eac: 71 d0 rcall .+226 ; 0x3f90 <putch> + 3eae: 6d c0 rjmp .+218 ; 0x3f8a <main+0x18a> + } + /* Write memory, length is big endian and is in bytes */ + else if(ch == STK_PROG_PAGE) { + 3eb0: 84 36 cpi r24, 0x64 ; 100 + 3eb2: 09 f0 breq .+2 ; 0x3eb6 <main+0xb6> + 3eb4: 43 c0 rjmp .+134 ; 0x3f3c <main+0x13c> + // PROGRAM PAGE - we support flash programming only, not EEPROM + uint8_t *bufPtr; + uint16_t addrPtr; + + getLen(); + 3eb6: 7c d0 rcall .+248 ; 0x3fb0 <getLen> + + // Immediately start page erase - this will 4.5ms + boot_page_erase((uint16_t)(void*)address); + 3eb8: e0 91 00 02 lds r30, 0x0200 + 3ebc: f0 91 01 02 lds r31, 0x0201 + 3ec0: 83 e0 ldi r24, 0x03 ; 3 + 3ec2: 80 93 57 00 sts 0x0057, r24 + 3ec6: e8 95 spm + 3ec8: c0 e0 ldi r28, 0x00 ; 0 + 3eca: d1 e0 ldi r29, 0x01 ; 1 + + // While that is going on, read in page contents + bufPtr = buff; + do *bufPtr++ = getch(); + 3ecc: 69 d0 rcall .+210 ; 0x3fa0 <getch> + 3ece: 89 93 st Y+, r24 + while (--length); + 3ed0: 80 91 02 02 lds r24, 0x0202 + 3ed4: 81 50 subi r24, 0x01 ; 1 + 3ed6: 80 93 02 02 sts 0x0202, r24 + 3eda: 88 23 and r24, r24 + 3edc: b9 f7 brne .-18 ; 0x3ecc <main+0xcc> + + // Read command terminator, start reply + verifySpace(); + 3ede: 78 d0 rcall .+240 ; 0x3fd0 <verifySpace> + + // If only a partial page is to be programmed, the erase might not be complete. + // So check that here + boot_spm_busy_wait(); + 3ee0: 07 b6 in r0, 0x37 ; 55 + 3ee2: 00 fc sbrc r0, 0 + 3ee4: fd cf rjmp .-6 ; 0x3ee0 <main+0xe0> + } +#endif + + // Copy buffer into programming buffer + bufPtr = buff; + addrPtr = (uint16_t)(void*)address; + 3ee6: 40 91 00 02 lds r20, 0x0200 + 3eea: 50 91 01 02 lds r21, 0x0201 + 3eee: a0 e0 ldi r26, 0x00 ; 0 + 3ef0: b1 e0 ldi r27, 0x01 ; 1 + ch = SPM_PAGESIZE / 2; + do { + uint16_t a; + a = *bufPtr++; + 3ef2: 2c 91 ld r18, X + 3ef4: 30 e0 ldi r19, 0x00 ; 0 + a |= (*bufPtr++) << 8; + 3ef6: 11 96 adiw r26, 0x01 ; 1 + 3ef8: 8c 91 ld r24, X + 3efa: 11 97 sbiw r26, 0x01 ; 1 + 3efc: 90 e0 ldi r25, 0x00 ; 0 + 3efe: 98 2f mov r25, r24 + 3f00: 88 27 eor r24, r24 + 3f02: 82 2b or r24, r18 + 3f04: 93 2b or r25, r19 +#ifdef VIRTUAL_BOOT_PARTITION +#define rstVect (*(uint16_t*)(0x204)) +#define wdtVect (*(uint16_t*)(0x206)) +#endif +/* main program starts here */ +int main(void) { + 3f06: 12 96 adiw r26, 0x02 ; 2 + ch = SPM_PAGESIZE / 2; + do { + uint16_t a; + a = *bufPtr++; + a |= (*bufPtr++) << 8; + boot_page_fill((uint16_t)(void*)addrPtr,a); + 3f08: fa 01 movw r30, r20 + 3f0a: 0c 01 movw r0, r24 + 3f0c: d0 92 57 00 sts 0x0057, r13 + 3f10: e8 95 spm + 3f12: 11 24 eor r1, r1 + addrPtr += 2; + 3f14: 4e 5f subi r20, 0xFE ; 254 + 3f16: 5f 4f sbci r21, 0xFF ; 255 + } while (--ch); + 3f18: f1 e0 ldi r31, 0x01 ; 1 + 3f1a: a0 38 cpi r26, 0x80 ; 128 + 3f1c: bf 07 cpc r27, r31 + 3f1e: 49 f7 brne .-46 ; 0x3ef2 <main+0xf2> + + // Write from programming buffer + boot_page_write((uint16_t)(void*)address); + 3f20: e0 91 00 02 lds r30, 0x0200 + 3f24: f0 91 01 02 lds r31, 0x0201 + 3f28: e0 92 57 00 sts 0x0057, r14 + 3f2c: e8 95 spm + boot_spm_busy_wait(); + 3f2e: 07 b6 in r0, 0x37 ; 55 + 3f30: 00 fc sbrc r0, 0 + 3f32: fd cf rjmp .-6 ; 0x3f2e <main+0x12e> + +#if defined(RWWSRE) + // Reenable read access to flash + boot_rww_enable(); + 3f34: f0 92 57 00 sts 0x0057, r15 + 3f38: e8 95 spm + 3f3a: 27 c0 rjmp .+78 ; 0x3f8a <main+0x18a> +#endif + + } + /* Read memory block mode, length is big endian. */ + else if(ch == STK_READ_PAGE) { + 3f3c: 84 37 cpi r24, 0x74 ; 116 + 3f3e: b9 f4 brne .+46 ; 0x3f6e <main+0x16e> + // READ PAGE - we only read flash + getLen(); + 3f40: 37 d0 rcall .+110 ; 0x3fb0 <getLen> + verifySpace(); + 3f42: 46 d0 rcall .+140 ; 0x3fd0 <verifySpace> + else ch = pgm_read_byte_near(address); + address++; + putch(ch); + } while (--length); +#else + do putch(pgm_read_byte_near(address++)); + 3f44: e0 91 00 02 lds r30, 0x0200 + 3f48: f0 91 01 02 lds r31, 0x0201 + 3f4c: 31 96 adiw r30, 0x01 ; 1 + 3f4e: f0 93 01 02 sts 0x0201, r31 + 3f52: e0 93 00 02 sts 0x0200, r30 + 3f56: 31 97 sbiw r30, 0x01 ; 1 + 3f58: e4 91 lpm r30, Z+ + 3f5a: 8e 2f mov r24, r30 + 3f5c: 19 d0 rcall .+50 ; 0x3f90 <putch> + while (--length); + 3f5e: 80 91 02 02 lds r24, 0x0202 + 3f62: 81 50 subi r24, 0x01 ; 1 + 3f64: 80 93 02 02 sts 0x0202, r24 + 3f68: 88 23 and r24, r24 + 3f6a: 61 f7 brne .-40 ; 0x3f44 <main+0x144> + 3f6c: 0e c0 rjmp .+28 ; 0x3f8a <main+0x18a> +#endif + } + + /* Get device signature bytes */ + else if(ch == STK_READ_SIGN) { + 3f6e: 85 37 cpi r24, 0x75 ; 117 + 3f70: 39 f4 brne .+14 ; 0x3f80 <main+0x180> + // READ SIGN - return what Avrdude wants to hear + verifySpace(); + 3f72: 2e d0 rcall .+92 ; 0x3fd0 <verifySpace> + putch(SIGNATURE_0); + 3f74: 8e e1 ldi r24, 0x1E ; 30 + 3f76: 0c d0 rcall .+24 ; 0x3f90 <putch> + putch(SIGNATURE_1); + 3f78: 84 e9 ldi r24, 0x94 ; 148 + 3f7a: 0a d0 rcall .+20 ; 0x3f90 <putch> + putch(SIGNATURE_2); + 3f7c: 86 e0 ldi r24, 0x06 ; 6 + 3f7e: 96 cf rjmp .-212 ; 0x3eac <main+0xac> + } + else if (ch == 'Q') { + 3f80: 81 35 cpi r24, 0x51 ; 81 + 3f82: 11 f4 brne .+4 ; 0x3f88 <main+0x188> + // Adaboot no-wait mod + watchdogConfig(WATCHDOG_16MS); + 3f84: 88 e0 ldi r24, 0x08 ; 8 + 3f86: 19 d0 rcall .+50 ; 0x3fba <watchdogConfig> + verifySpace(); + } + else { + // This covers the response to commands like STK_ENTER_PROGMODE + verifySpace(); + 3f88: 23 d0 rcall .+70 ; 0x3fd0 <verifySpace> + } + putch(STK_OK); + 3f8a: 80 e1 ldi r24, 0x10 ; 16 + 3f8c: 01 d0 rcall .+2 ; 0x3f90 <putch> + 3f8e: 63 cf rjmp .-314 ; 0x3e56 <main+0x56> + +00003f90 <putch>: + } +} + +void putch(char ch) { + 3f90: 98 2f mov r25, r24 +#ifndef SOFT_UART + while (!(UCSR0A & _BV(UDRE0))); + 3f92: 80 91 c0 00 lds r24, 0x00C0 + 3f96: 85 ff sbrs r24, 5 + 3f98: fc cf rjmp .-8 ; 0x3f92 <putch+0x2> + UDR0 = ch; + 3f9a: 90 93 c6 00 sts 0x00C6, r25 + [uartBit] "I" (UART_TX_BIT) + : + "r25" + ); +#endif +} + 3f9e: 08 95 ret + +00003fa0 <getch>: + return getch(); +} + +// Watchdog functions. These are only safe with interrupts turned off. +void watchdogReset() { + __asm__ __volatile__ ( + 3fa0: a8 95 wdr + [uartBit] "I" (UART_RX_BIT) + : + "r25" +); +#else + while(!(UCSR0A & _BV(RXC0))); + 3fa2: 80 91 c0 00 lds r24, 0x00C0 + 3fa6: 87 ff sbrs r24, 7 + 3fa8: fc cf rjmp .-8 ; 0x3fa2 <getch+0x2> + ch = UDR0; + 3faa: 80 91 c6 00 lds r24, 0x00C6 +#ifdef LED_DATA_FLASH + LED_PIN |= _BV(LED); +#endif + + return ch; +} + 3fae: 08 95 ret + +00003fb0 <getLen>: + } while (--count); +} +#endif + +uint8_t getLen() { + getch(); + 3fb0: f7 df rcall .-18 ; 0x3fa0 <getch> + length = getch(); + 3fb2: f6 df rcall .-20 ; 0x3fa0 <getch> + 3fb4: 80 93 02 02 sts 0x0202, r24 + return getch(); +} + 3fb8: f3 cf rjmp .-26 ; 0x3fa0 <getch> + +00003fba <watchdogConfig>: + "wdr\n" + ); +} + +void watchdogConfig(uint8_t x) { + WDTCSR = _BV(WDCE) | _BV(WDE); + 3fba: e0 e6 ldi r30, 0x60 ; 96 + 3fbc: f0 e0 ldi r31, 0x00 ; 0 + 3fbe: 98 e1 ldi r25, 0x18 ; 24 + 3fc0: 90 83 st Z, r25 + WDTCSR = x; + 3fc2: 80 83 st Z, r24 +} + 3fc4: 08 95 ret + +00003fc6 <appStart>: + +void appStart() { + watchdogConfig(WATCHDOG_OFF); + 3fc6: 80 e0 ldi r24, 0x00 ; 0 + 3fc8: f8 df rcall .-16 ; 0x3fba <watchdogConfig> + __asm__ __volatile__ ( + 3fca: ee 27 eor r30, r30 + 3fcc: ff 27 eor r31, r31 + 3fce: 09 94 ijmp + +00003fd0 <verifySpace>: + do getch(); while (--count); + verifySpace(); +} + +void verifySpace() { + if (getch() != CRC_EOP) appStart(); + 3fd0: e7 df rcall .-50 ; 0x3fa0 <getch> + 3fd2: 80 32 cpi r24, 0x20 ; 32 + 3fd4: 09 f0 breq .+2 ; 0x3fd8 <verifySpace+0x8> + 3fd6: f7 df rcall .-18 ; 0x3fc6 <appStart> + putch(STK_INSYNC); + 3fd8: 84 e1 ldi r24, 0x14 ; 20 +} + 3fda: da cf rjmp .-76 ; 0x3f90 <putch> + ::[count] "M" (UART_B_VALUE) + ); +} +#endif + +void getNch(uint8_t count) { + 3fdc: 1f 93 push r17 + 3fde: 18 2f mov r17, r24 + +00003fe0 <getNch>: + do getch(); while (--count); + 3fe0: df df rcall .-66 ; 0x3fa0 <getch> + 3fe2: 11 50 subi r17, 0x01 ; 1 + 3fe4: e9 f7 brne .-6 ; 0x3fe0 <getNch> + verifySpace(); + 3fe6: f4 df rcall .-24 ; 0x3fd0 <verifySpace> +} + 3fe8: 1f 91 pop r17 + 3fea: 08 95 ret diff --git a/test/ardmake/hardware/bootloaders/optiboot/optiboot_pro_8MHz.hex b/test/ardmake/hardware/bootloaders/optiboot/optiboot_pro_8MHz.hex new file mode 100644 index 0000000..9d31a7a --- /dev/null +++ b/test/ardmake/hardware/bootloaders/optiboot/optiboot_pro_8MHz.hex @@ -0,0 +1,34 @@ +:103E000085E08093810084B714BE81FFE4D08DE00B
+:103E1000DCD0259A519A86E028E13EEF91E030937C
+:103E200085002093840096BBB09BFECF1D9AA89579
+:103E30008150A9F7DD24D394A5E0EA2EF1E1FF2E0D
+:103E4000ABD0813421F481E0D1D083E024C082342E
+:103E500011F484E103C0853419F485E0C7D08AC029
+:103E60008535A1F499D0082F10E01093010200933A
+:103E7000000292D090E0982F8827802B912B880FFA
+:103E8000991F909301028093000273C0863529F434
+:103E900084E0ACD080E071D06DC0843609F043C0BE
+:103EA0008FD0E0910002F091010283E080935700EF
+:103EB000E895C0E0D1E070D08993809102028150F2
+:103EC000809302028823B9F78BD007B600FCFDCFA0
+:103ED0004091000250910102A0E0B1E02C9130E04D
+:103EE00011968C91119790E0982F8827822B932B15
+:103EF0001296FA010C01D0925700E89511244E5FFA
+:103F00005F4FF1E0A038BF0749F7E0910002F09160
+:103F10000102E0925700E89507B600FCFDCFF09251
+:103F20005700E89527C08437B9F44AD059D0E091BA
+:103F30000002F09101023196F0930102E093000239
+:103F40003197E4918E2F19D0809102028150809395
+:103F50000202882361F70EC0853739F441D08EE123
+:103F60000CD084E90AD086E096CF813511F488E040
+:103F70002CD036D080E101D063CF2AE030E08095AC
+:103F8000089410F4599802C0599A000015D014D022
+:103F900086952A95B1F70895A89529E030E04899CB
+:103FA000FECF0AD009D008D08894489908942A9561
+:103FB00011F08795F7CF089598E09A95F1F7089555
+:103FC000EBDFEADF80930202E7CFE0E6F0E098E182
+:103FD00090838083089580E0F8DFEE27FF2709941F
+:103FE000DBDF803209F0F7DF84E1C7CF1F93182FA2
+:0C3FF000D3DF1150E9F7F4DF1F910895B2
+:0400000300003E00BB
+:00000001FF
diff --git a/test/ardmake/hardware/bootloaders/optiboot/optiboot_pro_8MHz.lst b/test/ardmake/hardware/bootloaders/optiboot/optiboot_pro_8MHz.lst new file mode 100644 index 0000000..94603e2 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/optiboot/optiboot_pro_8MHz.lst @@ -0,0 +1,533 @@ + +optiboot_pro_8MHz.elf: file format elf32-avr + +Sections: +Idx Name Size VMA LMA File off Algn + 0 .text 000001fc 00003e00 00003e00 00000054 2**1 + CONTENTS, ALLOC, LOAD, READONLY, CODE + 1 .debug_aranges 00000028 00000000 00000000 00000250 2**0 + CONTENTS, READONLY, DEBUGGING + 2 .debug_pubnames 00000078 00000000 00000000 00000278 2**0 + CONTENTS, READONLY, DEBUGGING + 3 .debug_info 00000277 00000000 00000000 000002f0 2**0 + CONTENTS, READONLY, DEBUGGING + 4 .debug_abbrev 00000194 00000000 00000000 00000567 2**0 + CONTENTS, READONLY, DEBUGGING + 5 .debug_line 000003bb 00000000 00000000 000006fb 2**0 + CONTENTS, READONLY, DEBUGGING + 6 .debug_frame 000000a0 00000000 00000000 00000ab8 2**2 + CONTENTS, READONLY, DEBUGGING + 7 .debug_str 0000013f 00000000 00000000 00000b58 2**0 + CONTENTS, READONLY, DEBUGGING + 8 .debug_loc 000001a0 00000000 00000000 00000c97 2**0 + CONTENTS, READONLY, DEBUGGING + 9 .debug_ranges 00000070 00000000 00000000 00000e37 2**0 + CONTENTS, READONLY, DEBUGGING + +Disassembly of section .text: + +00003e00 <main>: +#ifdef VIRTUAL_BOOT_PARTITION +#define rstVect (*(uint16_t*)(0x204)) +#define wdtVect (*(uint16_t*)(0x206)) +#endif +/* main program starts here */ +int main(void) { + 3e00: 85 e0 ldi r24, 0x05 ; 5 + 3e02: 80 93 81 00 sts 0x0081, r24 + UCSR0C = _BV(UCSZ00) | _BV(UCSZ01); + UBRR0L = (uint8_t)( (F_CPU + BAUD_RATE * 4L) / (BAUD_RATE * 8L) - 1 ); +#endif + + // Adaboot no-wait mod + ch = MCUSR; + 3e06: 84 b7 in r24, 0x34 ; 52 + MCUSR = 0; + 3e08: 14 be out 0x34, r1 ; 52 + if (!(ch & _BV(EXTRF))) appStart(); + 3e0a: 81 ff sbrs r24, 1 + 3e0c: e4 d0 rcall .+456 ; 0x3fd6 <appStart> + + // Set up watchdog to trigger after 500ms + watchdogConfig(WATCHDOG_500MS); + 3e0e: 8d e0 ldi r24, 0x0D ; 13 + 3e10: dc d0 rcall .+440 ; 0x3fca <watchdogConfig> + + /* Set LED pin as output */ + LED_DDR |= _BV(LED); + 3e12: 25 9a sbi 0x04, 5 ; 4 + +#ifdef SOFT_UART + /* Set TX pin as output */ + UART_DDR |= _BV(UART_TX_BIT); + 3e14: 51 9a sbi 0x0a, 1 ; 10 + 3e16: 86 e0 ldi r24, 0x06 ; 6 +} + +#if LED_START_FLASHES > 0 +void flash_led(uint8_t count) { + do { + TCNT1 = -(F_CPU/(1024*16)); + 3e18: 28 e1 ldi r18, 0x18 ; 24 + 3e1a: 3e ef ldi r19, 0xFE ; 254 + TIFR1 = _BV(TOV1); + 3e1c: 91 e0 ldi r25, 0x01 ; 1 +} + +#if LED_START_FLASHES > 0 +void flash_led(uint8_t count) { + do { + TCNT1 = -(F_CPU/(1024*16)); + 3e1e: 30 93 85 00 sts 0x0085, r19 + 3e22: 20 93 84 00 sts 0x0084, r18 + TIFR1 = _BV(TOV1); + 3e26: 96 bb out 0x16, r25 ; 22 + while(!(TIFR1 & _BV(TOV1))); + 3e28: b0 9b sbis 0x16, 0 ; 22 + 3e2a: fe cf rjmp .-4 ; 0x3e28 <main+0x28> + LED_PIN |= _BV(LED); + 3e2c: 1d 9a sbi 0x03, 5 ; 3 + return getch(); +} + +// Watchdog functions. These are only safe with interrupts turned off. +void watchdogReset() { + __asm__ __volatile__ ( + 3e2e: a8 95 wdr + TCNT1 = -(F_CPU/(1024*16)); + TIFR1 = _BV(TOV1); + while(!(TIFR1 & _BV(TOV1))); + LED_PIN |= _BV(LED); + watchdogReset(); + } while (--count); + 3e30: 81 50 subi r24, 0x01 ; 1 + 3e32: a9 f7 brne .-22 ; 0x3e1e <main+0x1e> + /* get character from UART */ + ch = getch(); + + if(ch == STK_GET_PARAMETER) { + // GET PARAMETER returns a generic 0x03 reply - enough to keep Avrdude happy + getNch(1); + 3e34: dd 24 eor r13, r13 + 3e36: d3 94 inc r13 + boot_page_fill((uint16_t)(void*)addrPtr,a); + addrPtr += 2; + } while (--ch); + + // Write from programming buffer + boot_page_write((uint16_t)(void*)address); + 3e38: a5 e0 ldi r26, 0x05 ; 5 + 3e3a: ea 2e mov r14, r26 + boot_spm_busy_wait(); + +#if defined(RWWSRE) + // Reenable read access to flash + boot_rww_enable(); + 3e3c: f1 e1 ldi r31, 0x11 ; 17 + 3e3e: ff 2e mov r15, r31 +#endif + + /* Forever loop */ + for (;;) { + /* get character from UART */ + ch = getch(); + 3e40: ab d0 rcall .+342 ; 0x3f98 <getch> + + if(ch == STK_GET_PARAMETER) { + 3e42: 81 34 cpi r24, 0x41 ; 65 + 3e44: 21 f4 brne .+8 ; 0x3e4e <main+0x4e> + // GET PARAMETER returns a generic 0x03 reply - enough to keep Avrdude happy + getNch(1); + 3e46: 81 e0 ldi r24, 0x01 ; 1 + 3e48: d1 d0 rcall .+418 ; 0x3fec <verifySpace+0xc> + putch(0x03); + 3e4a: 83 e0 ldi r24, 0x03 ; 3 + 3e4c: 24 c0 rjmp .+72 ; 0x3e96 <main+0x96> + } + else if(ch == STK_SET_DEVICE) { + 3e4e: 82 34 cpi r24, 0x42 ; 66 + 3e50: 11 f4 brne .+4 ; 0x3e56 <main+0x56> + // SET DEVICE is ignored + getNch(20); + 3e52: 84 e1 ldi r24, 0x14 ; 20 + 3e54: 03 c0 rjmp .+6 ; 0x3e5c <main+0x5c> + } + else if(ch == STK_SET_DEVICE_EXT) { + 3e56: 85 34 cpi r24, 0x45 ; 69 + 3e58: 19 f4 brne .+6 ; 0x3e60 <main+0x60> + // SET DEVICE EXT is ignored + getNch(5); + 3e5a: 85 e0 ldi r24, 0x05 ; 5 + 3e5c: c7 d0 rcall .+398 ; 0x3fec <verifySpace+0xc> + 3e5e: 8a c0 rjmp .+276 ; 0x3f74 <main+0x174> + } + else if(ch == STK_LOAD_ADDRESS) { + 3e60: 85 35 cpi r24, 0x55 ; 85 + 3e62: a1 f4 brne .+40 ; 0x3e8c <main+0x8c> + // LOAD ADDRESS + address = getch(); + 3e64: 99 d0 rcall .+306 ; 0x3f98 <getch> + 3e66: 08 2f mov r16, r24 + 3e68: 10 e0 ldi r17, 0x00 ; 0 + 3e6a: 10 93 01 02 sts 0x0201, r17 + 3e6e: 00 93 00 02 sts 0x0200, r16 + address = (address & 0xff) | (getch() << 8); + 3e72: 92 d0 rcall .+292 ; 0x3f98 <getch> + 3e74: 90 e0 ldi r25, 0x00 ; 0 + 3e76: 98 2f mov r25, r24 + 3e78: 88 27 eor r24, r24 + 3e7a: 80 2b or r24, r16 + 3e7c: 91 2b or r25, r17 + address += address; // Convert from word address to byte address + 3e7e: 88 0f add r24, r24 + 3e80: 99 1f adc r25, r25 + 3e82: 90 93 01 02 sts 0x0201, r25 + 3e86: 80 93 00 02 sts 0x0200, r24 + 3e8a: 73 c0 rjmp .+230 ; 0x3f72 <main+0x172> + verifySpace(); + } + else if(ch == STK_UNIVERSAL) { + 3e8c: 86 35 cpi r24, 0x56 ; 86 + 3e8e: 29 f4 brne .+10 ; 0x3e9a <main+0x9a> + // UNIVERSAL command is ignored + getNch(4); + 3e90: 84 e0 ldi r24, 0x04 ; 4 + 3e92: ac d0 rcall .+344 ; 0x3fec <verifySpace+0xc> + putch(0x00); + 3e94: 80 e0 ldi r24, 0x00 ; 0 + 3e96: 71 d0 rcall .+226 ; 0x3f7a <putch> + 3e98: 6d c0 rjmp .+218 ; 0x3f74 <main+0x174> + } + /* Write memory, length is big endian and is in bytes */ + else if(ch == STK_PROG_PAGE) { + 3e9a: 84 36 cpi r24, 0x64 ; 100 + 3e9c: 09 f0 breq .+2 ; 0x3ea0 <main+0xa0> + 3e9e: 43 c0 rjmp .+134 ; 0x3f26 <main+0x126> + // PROGRAM PAGE - we support flash programming only, not EEPROM + uint8_t *bufPtr; + uint16_t addrPtr; + + getLen(); + 3ea0: 8f d0 rcall .+286 ; 0x3fc0 <getLen> + + // Immediately start page erase - this will 4.5ms + boot_page_erase((uint16_t)(void*)address); + 3ea2: e0 91 00 02 lds r30, 0x0200 + 3ea6: f0 91 01 02 lds r31, 0x0201 + 3eaa: 83 e0 ldi r24, 0x03 ; 3 + 3eac: 80 93 57 00 sts 0x0057, r24 + 3eb0: e8 95 spm + 3eb2: c0 e0 ldi r28, 0x00 ; 0 + 3eb4: d1 e0 ldi r29, 0x01 ; 1 + + // While that is going on, read in page contents + bufPtr = buff; + do *bufPtr++ = getch(); + 3eb6: 70 d0 rcall .+224 ; 0x3f98 <getch> + 3eb8: 89 93 st Y+, r24 + while (--length); + 3eba: 80 91 02 02 lds r24, 0x0202 + 3ebe: 81 50 subi r24, 0x01 ; 1 + 3ec0: 80 93 02 02 sts 0x0202, r24 + 3ec4: 88 23 and r24, r24 + 3ec6: b9 f7 brne .-18 ; 0x3eb6 <main+0xb6> + + // Read command terminator, start reply + verifySpace(); + 3ec8: 8b d0 rcall .+278 ; 0x3fe0 <verifySpace> + + // If only a partial page is to be programmed, the erase might not be complete. + // So check that here + boot_spm_busy_wait(); + 3eca: 07 b6 in r0, 0x37 ; 55 + 3ecc: 00 fc sbrc r0, 0 + 3ece: fd cf rjmp .-6 ; 0x3eca <main+0xca> + } +#endif + + // Copy buffer into programming buffer + bufPtr = buff; + addrPtr = (uint16_t)(void*)address; + 3ed0: 40 91 00 02 lds r20, 0x0200 + 3ed4: 50 91 01 02 lds r21, 0x0201 + 3ed8: a0 e0 ldi r26, 0x00 ; 0 + 3eda: b1 e0 ldi r27, 0x01 ; 1 + ch = SPM_PAGESIZE / 2; + do { + uint16_t a; + a = *bufPtr++; + 3edc: 2c 91 ld r18, X + 3ede: 30 e0 ldi r19, 0x00 ; 0 + a |= (*bufPtr++) << 8; + 3ee0: 11 96 adiw r26, 0x01 ; 1 + 3ee2: 8c 91 ld r24, X + 3ee4: 11 97 sbiw r26, 0x01 ; 1 + 3ee6: 90 e0 ldi r25, 0x00 ; 0 + 3ee8: 98 2f mov r25, r24 + 3eea: 88 27 eor r24, r24 + 3eec: 82 2b or r24, r18 + 3eee: 93 2b or r25, r19 +#ifdef VIRTUAL_BOOT_PARTITION +#define rstVect (*(uint16_t*)(0x204)) +#define wdtVect (*(uint16_t*)(0x206)) +#endif +/* main program starts here */ +int main(void) { + 3ef0: 12 96 adiw r26, 0x02 ; 2 + ch = SPM_PAGESIZE / 2; + do { + uint16_t a; + a = *bufPtr++; + a |= (*bufPtr++) << 8; + boot_page_fill((uint16_t)(void*)addrPtr,a); + 3ef2: fa 01 movw r30, r20 + 3ef4: 0c 01 movw r0, r24 + 3ef6: d0 92 57 00 sts 0x0057, r13 + 3efa: e8 95 spm + 3efc: 11 24 eor r1, r1 + addrPtr += 2; + 3efe: 4e 5f subi r20, 0xFE ; 254 + 3f00: 5f 4f sbci r21, 0xFF ; 255 + } while (--ch); + 3f02: f1 e0 ldi r31, 0x01 ; 1 + 3f04: a0 38 cpi r26, 0x80 ; 128 + 3f06: bf 07 cpc r27, r31 + 3f08: 49 f7 brne .-46 ; 0x3edc <main+0xdc> + + // Write from programming buffer + boot_page_write((uint16_t)(void*)address); + 3f0a: e0 91 00 02 lds r30, 0x0200 + 3f0e: f0 91 01 02 lds r31, 0x0201 + 3f12: e0 92 57 00 sts 0x0057, r14 + 3f16: e8 95 spm + boot_spm_busy_wait(); + 3f18: 07 b6 in r0, 0x37 ; 55 + 3f1a: 00 fc sbrc r0, 0 + 3f1c: fd cf rjmp .-6 ; 0x3f18 <main+0x118> + +#if defined(RWWSRE) + // Reenable read access to flash + boot_rww_enable(); + 3f1e: f0 92 57 00 sts 0x0057, r15 + 3f22: e8 95 spm + 3f24: 27 c0 rjmp .+78 ; 0x3f74 <main+0x174> +#endif + + } + /* Read memory block mode, length is big endian. */ + else if(ch == STK_READ_PAGE) { + 3f26: 84 37 cpi r24, 0x74 ; 116 + 3f28: b9 f4 brne .+46 ; 0x3f58 <main+0x158> + // READ PAGE - we only read flash + getLen(); + 3f2a: 4a d0 rcall .+148 ; 0x3fc0 <getLen> + verifySpace(); + 3f2c: 59 d0 rcall .+178 ; 0x3fe0 <verifySpace> + else ch = pgm_read_byte_near(address); + address++; + putch(ch); + } while (--length); +#else + do putch(pgm_read_byte_near(address++)); + 3f2e: e0 91 00 02 lds r30, 0x0200 + 3f32: f0 91 01 02 lds r31, 0x0201 + 3f36: 31 96 adiw r30, 0x01 ; 1 + 3f38: f0 93 01 02 sts 0x0201, r31 + 3f3c: e0 93 00 02 sts 0x0200, r30 + 3f40: 31 97 sbiw r30, 0x01 ; 1 + 3f42: e4 91 lpm r30, Z+ + 3f44: 8e 2f mov r24, r30 + 3f46: 19 d0 rcall .+50 ; 0x3f7a <putch> + while (--length); + 3f48: 80 91 02 02 lds r24, 0x0202 + 3f4c: 81 50 subi r24, 0x01 ; 1 + 3f4e: 80 93 02 02 sts 0x0202, r24 + 3f52: 88 23 and r24, r24 + 3f54: 61 f7 brne .-40 ; 0x3f2e <main+0x12e> + 3f56: 0e c0 rjmp .+28 ; 0x3f74 <main+0x174> +#endif + } + + /* Get device signature bytes */ + else if(ch == STK_READ_SIGN) { + 3f58: 85 37 cpi r24, 0x75 ; 117 + 3f5a: 39 f4 brne .+14 ; 0x3f6a <main+0x16a> + // READ SIGN - return what Avrdude wants to hear + verifySpace(); + 3f5c: 41 d0 rcall .+130 ; 0x3fe0 <verifySpace> + putch(SIGNATURE_0); + 3f5e: 8e e1 ldi r24, 0x1E ; 30 + 3f60: 0c d0 rcall .+24 ; 0x3f7a <putch> + putch(SIGNATURE_1); + 3f62: 84 e9 ldi r24, 0x94 ; 148 + 3f64: 0a d0 rcall .+20 ; 0x3f7a <putch> + putch(SIGNATURE_2); + 3f66: 86 e0 ldi r24, 0x06 ; 6 + 3f68: 96 cf rjmp .-212 ; 0x3e96 <main+0x96> + } + else if (ch == 'Q') { + 3f6a: 81 35 cpi r24, 0x51 ; 81 + 3f6c: 11 f4 brne .+4 ; 0x3f72 <main+0x172> + // Adaboot no-wait mod + watchdogConfig(WATCHDOG_16MS); + 3f6e: 88 e0 ldi r24, 0x08 ; 8 + 3f70: 2c d0 rcall .+88 ; 0x3fca <watchdogConfig> + verifySpace(); + } + else { + // This covers the response to commands like STK_ENTER_PROGMODE + verifySpace(); + 3f72: 36 d0 rcall .+108 ; 0x3fe0 <verifySpace> + } + putch(STK_OK); + 3f74: 80 e1 ldi r24, 0x10 ; 16 + 3f76: 01 d0 rcall .+2 ; 0x3f7a <putch> + 3f78: 63 cf rjmp .-314 ; 0x3e40 <main+0x40> + +00003f7a <putch>: +void putch(char ch) { +#ifndef SOFT_UART + while (!(UCSR0A & _BV(UDRE0))); + UDR0 = ch; +#else + __asm__ __volatile__ ( + 3f7a: 2a e0 ldi r18, 0x0A ; 10 + 3f7c: 30 e0 ldi r19, 0x00 ; 0 + 3f7e: 80 95 com r24 + 3f80: 08 94 sec + 3f82: 10 f4 brcc .+4 ; 0x3f88 <putch+0xe> + 3f84: 59 98 cbi 0x0b, 1 ; 11 + 3f86: 02 c0 rjmp .+4 ; 0x3f8c <putch+0x12> + 3f88: 59 9a sbi 0x0b, 1 ; 11 + 3f8a: 00 00 nop + 3f8c: 15 d0 rcall .+42 ; 0x3fb8 <uartDelay> + 3f8e: 14 d0 rcall .+40 ; 0x3fb8 <uartDelay> + 3f90: 86 95 lsr r24 + 3f92: 2a 95 dec r18 + 3f94: b1 f7 brne .-20 ; 0x3f82 <putch+0x8> + [uartBit] "I" (UART_TX_BIT) + : + "r25" + ); +#endif +} + 3f96: 08 95 ret + +00003f98 <getch>: + return getch(); +} + +// Watchdog functions. These are only safe with interrupts turned off. +void watchdogReset() { + __asm__ __volatile__ ( + 3f98: a8 95 wdr +#ifdef LED_DATA_FLASH + LED_PIN |= _BV(LED); +#endif + + return ch; +} + 3f9a: 29 e0 ldi r18, 0x09 ; 9 + 3f9c: 30 e0 ldi r19, 0x00 ; 0 + 3f9e: 48 99 sbic 0x09, 0 ; 9 + 3fa0: fe cf rjmp .-4 ; 0x3f9e <getch+0x6> + 3fa2: 0a d0 rcall .+20 ; 0x3fb8 <uartDelay> + 3fa4: 09 d0 rcall .+18 ; 0x3fb8 <uartDelay> + 3fa6: 08 d0 rcall .+16 ; 0x3fb8 <uartDelay> + 3fa8: 88 94 clc + 3faa: 48 99 sbic 0x09, 0 ; 9 + 3fac: 08 94 sec + 3fae: 2a 95 dec r18 + 3fb0: 11 f0 breq .+4 ; 0x3fb6 <getch+0x1e> + 3fb2: 87 95 ror r24 + 3fb4: f7 cf rjmp .-18 ; 0x3fa4 <getch+0xc> + 3fb6: 08 95 ret + +00003fb8 <uartDelay>: +#if UART_B_VALUE > 255 +#error Baud rate too slow for soft UART +#endif + +void uartDelay() { + __asm__ __volatile__ ( + 3fb8: 98 e0 ldi r25, 0x08 ; 8 + 3fba: 9a 95 dec r25 + 3fbc: f1 f7 brne .-4 ; 0x3fba <uartDelay+0x2> + 3fbe: 08 95 ret + +00003fc0 <getLen>: + } while (--count); +} +#endif + +uint8_t getLen() { + getch(); + 3fc0: eb df rcall .-42 ; 0x3f98 <getch> + length = getch(); + 3fc2: ea df rcall .-44 ; 0x3f98 <getch> + 3fc4: 80 93 02 02 sts 0x0202, r24 + return getch(); +} + 3fc8: e7 cf rjmp .-50 ; 0x3f98 <getch> + +00003fca <watchdogConfig>: + "wdr\n" + ); +} + +void watchdogConfig(uint8_t x) { + WDTCSR = _BV(WDCE) | _BV(WDE); + 3fca: e0 e6 ldi r30, 0x60 ; 96 + 3fcc: f0 e0 ldi r31, 0x00 ; 0 + 3fce: 98 e1 ldi r25, 0x18 ; 24 + 3fd0: 90 83 st Z, r25 + WDTCSR = x; + 3fd2: 80 83 st Z, r24 +} + 3fd4: 08 95 ret + +00003fd6 <appStart>: + +void appStart() { + watchdogConfig(WATCHDOG_OFF); + 3fd6: 80 e0 ldi r24, 0x00 ; 0 + 3fd8: f8 df rcall .-16 ; 0x3fca <watchdogConfig> + __asm__ __volatile__ ( + 3fda: ee 27 eor r30, r30 + 3fdc: ff 27 eor r31, r31 + 3fde: 09 94 ijmp + +00003fe0 <verifySpace>: + do getch(); while (--count); + verifySpace(); +} + +void verifySpace() { + if (getch() != CRC_EOP) appStart(); + 3fe0: db df rcall .-74 ; 0x3f98 <getch> + 3fe2: 80 32 cpi r24, 0x20 ; 32 + 3fe4: 09 f0 breq .+2 ; 0x3fe8 <verifySpace+0x8> + 3fe6: f7 df rcall .-18 ; 0x3fd6 <appStart> + putch(STK_INSYNC); + 3fe8: 84 e1 ldi r24, 0x14 ; 20 +} + 3fea: c7 cf rjmp .-114 ; 0x3f7a <putch> + ::[count] "M" (UART_B_VALUE) + ); +} +#endif + +void getNch(uint8_t count) { + 3fec: 1f 93 push r17 + 3fee: 18 2f mov r17, r24 + +00003ff0 <getNch>: + do getch(); while (--count); + 3ff0: d3 df rcall .-90 ; 0x3f98 <getch> + 3ff2: 11 50 subi r17, 0x01 ; 1 + 3ff4: e9 f7 brne .-6 ; 0x3ff0 <getNch> + verifySpace(); + 3ff6: f4 df rcall .-24 ; 0x3fe0 <verifySpace> +} + 3ff8: 1f 91 pop r17 + 3ffa: 08 95 ret diff --git a/test/ardmake/hardware/bootloaders/stk500v2/Makefile b/test/ardmake/hardware/bootloaders/stk500v2/Makefile new file mode 100644 index 0000000..54c5f85 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/stk500v2/Makefile @@ -0,0 +1,588 @@ +# ----------------------------------------------------------------------------
+# Makefile to compile and link stk500boot bootloader
+# Author: Peter Fleury
+# File: $Id: Makefile,v 1.3 2006/03/04 19:26:17 peter Exp $
+# based on WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.
+#
+# Adjust F_CPU below to the clock frequency in Mhz of your AVR target
+# Adjust BOOTLOADER_ADDRESS to your AVR target
+#
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device, using avrdude.
+# Please customize the avrdude settings below first!
+#
+# make debug = Start either simulavr or avarice as specified for debugging,
+# with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+# bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+# <MLS> = Mark Sproul msproul-at-skychariot.com
+
+
+# MCU name
+#MCU = atmega128
+
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#F_CPU = 16000000
+
+
+# Bootloader
+# Please adjust if using a different AVR
+# 0x0e00*2=0x1C00 for ATmega8 512 words Boot Size
+# 0xFC00*2=0x1F800 for ATmega128 1024 words Boot Size
+# 0xF800*2=0x1F000 for ATmega1280
+# 0xF000*2=0x1E000 for ATmega1280
+#BOOTLOADER_ADDRESS = 1E000
+
+
+# Output format. (can be srec, ihex, binary)
+FORMAT = ihex
+
+
+# Target file name (without extension).
+TARGET = stk500boot
+
+
+# List C source files here. (C dependencies are automatically generated.)
+SRC = stk500boot.c
+
+
+# List Assembler source files here.
+# Make them always end in a capital .S. Files ending in a lowercase .s
+# will not be considered source files but generated files (assembler
+# output from the compiler), and will be deleted upon "make clean"!
+# Even though the DOS/Win* filesystem matches both .s and .S the same,
+# it will preserve the spelling of the filenames, and gcc itself does
+# care about how the name is spelled on its command-line.
+ASRC =
+
+
+# Optimization level, can be [0, 1, 2, 3, s].
+# 0 = turn off optimization. s = optimize for size.
+# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
+OPT = s
+
+
+# Debugging format.
+# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
+# AVR Studio 4.10 requires dwarf-2.
+# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
+DEBUG = dwarf-2
+
+
+# List any extra directories to look for include files here.
+# Each directory must be seperated by a space.
+# Use forward slashes for directory separators.
+# For a directory that has spaces, enclose it in quotes.
+EXTRAINCDIRS =
+
+
+# Compiler flag to set the C Standard level.
+# c89 = "ANSI" C
+# gnu89 = c89 plus GCC extensions
+# c99 = ISO C99 standard (not yet fully implemented)
+# gnu99 = c99 plus GCC extensions
+CSTANDARD = -std=gnu99
+
+
+# Place -D or -U options here
+CDEFS = -DF_CPU=$(F_CPU)UL
+
+
+# Place -I options here
+CINCS =
+
+
+
+#---------------- Compiler Options ----------------
+# -g*: generate debugging information
+# -O*: optimization level
+# -f...: tuning, see GCC manual and avr-libc documentation
+# -Wall...: warning level
+# -Wa,...: tell GCC to pass this to the assembler.
+# -adhlns...: create assembler listing
+CFLAGS = -g$(DEBUG)
+CFLAGS += $(CDEFS) $(CINCS)
+CFLAGS += -O$(OPT)
+CFLAGS += -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums -mno-tablejump
+CFLAGS += -Wall -Wstrict-prototypes
+CFLAGS += -Wa,-adhlns=$(<:.c=.lst)
+CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
+CFLAGS += $(CSTANDARD)
+
+
+#---------------- Assembler Options ----------------
+# -Wa,...: tell GCC to pass this to the assembler.
+# -ahlms: create listing
+# -gstabs: have the assembler create line number information; note that
+# for use in COFF files, additional information about filenames
+# and function names needs to be present in the assembler source
+# files -- see avr-libc docs [FIXME: not yet described there]
+ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs
+
+
+#---------------- Library Options ----------------
+# Minimalistic printf version
+PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
+
+# Floating point printf version (requires MATH_LIB = -lm below)
+PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
+
+# If this is left blank, then it will use the Standard printf version.
+PRINTF_LIB =
+#PRINTF_LIB = $(PRINTF_LIB_MIN)
+#PRINTF_LIB = $(PRINTF_LIB_FLOAT)
+
+
+# Minimalistic scanf version
+SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
+
+# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
+SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
+
+# If this is left blank, then it will use the Standard scanf version.
+SCANF_LIB =
+#SCANF_LIB = $(SCANF_LIB_MIN)
+#SCANF_LIB = $(SCANF_LIB_FLOAT)
+
+
+MATH_LIB = -lm
+
+
+
+#---------------- External Memory Options ----------------
+
+# 64 KB of external RAM, starting after internal RAM (ATmega128!),
+# used for variables (.data/.bss) and heap (malloc()).
+#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
+
+# 64 KB of external RAM, starting after internal RAM (ATmega128!),
+# only used for heap (malloc()).
+#EXTMEMOPTS = -Wl,--defsym=__heap_start=0x801100,--defsym=__heap_end=0x80ffff
+
+EXTMEMOPTS =
+
+
+
+
+#---------------- Linker Options ----------------
+# -Wl,...: tell GCC to pass this to linker.
+# -Map: create map file
+# --cref: add cross reference to map file
+LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
+LDFLAGS += $(EXTMEMOPTS)
+LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
+
+
+#--------------- bootloader linker Options -------
+# BOOTLOADER_ADDRESS (=Start of Boot Loader section
+# in bytes - not words) is defined above.
+#LDFLAGS += -Wl,--section-start=.text=$(BOOTLOADER_ADDRESS) -nostartfiles -nodefaultlibs
+#LDFLAGS += -Wl,--section-start=.text=$(BOOTLOADER_ADDRESS) -nostartfiles
+LDFLAGS += -Wl,--section-start=.text=$(BOOTLOADER_ADDRESS)
+
+#---------------- Programming Options (avrdude) ----------------
+
+# Programming hardware: alf avr910 avrisp bascom bsd
+# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500
+#
+# Type: avrdude -c ?
+# to get a full listing.
+#
+AVRDUDE_PROGRAMMER = stk500v2
+
+# com1 = serial port. Use lpt1 to connect to parallel port.
+AVRDUDE_PORT = com1 # programmer connected to serial device
+
+AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
+#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
+
+
+# Uncomment the following if you want avrdude's erase cycle counter.
+# Note that this counter needs to be initialized first using -Yn,
+# see avrdude manual.
+#AVRDUDE_ERASE_COUNTER = -y
+
+# Uncomment the following if you do /not/ wish a verification to be
+# performed after programming the device.
+#AVRDUDE_NO_VERIFY = -V
+
+# Increase verbosity level. Please use this when submitting bug
+# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
+# to submit bug reports.
+#AVRDUDE_VERBOSE = -v -v
+
+AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
+AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
+AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
+AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
+
+
+
+#---------------- Debugging Options ----------------
+
+# For simulavr only - target MCU frequency.
+DEBUG_MFREQ = $(F_CPU)
+
+# Set the DEBUG_UI to either gdb or insight.
+# DEBUG_UI = gdb
+DEBUG_UI = insight
+
+# Set the debugging back-end to either avarice, simulavr.
+DEBUG_BACKEND = avarice
+#DEBUG_BACKEND = simulavr
+
+# GDB Init Filename.
+GDBINIT_FILE = __avr_gdbinit
+
+# When using avarice settings for the JTAG
+JTAG_DEV = /dev/com1
+
+# Debugging port used to communicate between GDB / avarice / simulavr.
+DEBUG_PORT = 4242
+
+# Debugging host used to communicate between GDB / avarice / simulavr, normally
+# just set to localhost unless doing some sort of crazy debugging when
+# avarice is running on a different computer.
+DEBUG_HOST = localhost
+
+
+
+#============================================================================
+
+
+# Define programs and commands.
+SHELL = sh
+CC = avr-gcc
+OBJCOPY = avr-objcopy
+OBJDUMP = avr-objdump
+SIZE = avr-size
+NM = avr-nm
+AVRDUDE = avrdude
+REMOVE = rm -f
+COPY = cp
+WINSHELL = cmd
+
+
+# Define Messages
+# English
+MSG_ERRORS_NONE = Errors: none
+MSG_BEGIN = -------- begin --------
+MSG_END = -------- end --------
+MSG_SIZE_BEFORE = Size before:
+MSG_SIZE_AFTER = Size after:
+MSG_COFF = Converting to AVR COFF:
+MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
+MSG_FLASH = Creating load file for Flash:
+MSG_EEPROM = Creating load file for EEPROM:
+MSG_EXTENDED_LISTING = Creating Extended Listing:
+MSG_SYMBOL_TABLE = Creating Symbol Table:
+MSG_LINKING = Linking:
+MSG_COMPILING = Compiling:
+MSG_ASSEMBLING = Assembling:
+MSG_CLEANING = Cleaning project:
+
+
+
+
+# Define all object files.
+OBJ = $(SRC:.c=.o) $(ASRC:.S=.o)
+
+# Define all listing files.
+LST = $(SRC:.c=.lst) $(ASRC:.S=.lst)
+
+
+# Compiler flags to generate dependency files.
+GENDEPFLAGS = -MD -MP -MF .dep/$(@F).d
+
+
+# Combine all necessary flags and optional flags.
+# Add target processor to flags.
+ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
+ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
+
+
+
+############################################################
+# May 25, 2010 <MLS> Adding 1280 support
+mega1280: MCU = atmega1280
+mega1280: F_CPU = 16000000
+mega1280: BOOTLOADER_ADDRESS = 1E000
+mega1280: CFLAGS += -D_MEGA_BOARD_
+mega1280: begin gccversion sizebefore build sizeafter end
+ mv $(TARGET).hex stk500boot_v2_mega1280.hex
+
+
+############################################################
+# Jul 6, 2010 <MLS> Adding 2560 support
+mega2560: MCU = atmega2560
+mega2560: F_CPU = 16000000
+mega2560: BOOTLOADER_ADDRESS = 3E000
+mega2560: CFLAGS += -D_MEGA_BOARD_
+mega2560: begin gccversion sizebefore build sizeafter end
+ mv $(TARGET).hex stk500boot_v2_mega2560.hex
+
+
+############################################################
+#Initial config on Amber128 board
+# avrdude: Device signature = 0x1e9702
+# avrdude: safemode: lfuse reads as 8F
+# avrdude: safemode: hfuse reads as CB
+# avrdude: safemode: efuse reads as FF
+# Jul 17, 2010 <MLS> Adding 128 support
+############################################################
+amber128: MCU = atmega128
+#amber128: F_CPU = 16000000
+amber128: F_CPU = 14745600
+amber128: BOOTLOADER_ADDRESS = 1E000
+amber128: CFLAGS += -D_BOARD_AMBER128_
+amber128: begin gccversion sizebefore build sizeafter end
+ mv $(TARGET).hex stk500boot_v2_amber128.hex
+
+############################################################
+# Aug 23, 2010 <MLS> Adding atmega2561 support
+m2561: MCU = atmega2561
+m2561: F_CPU = 8000000
+m2561: BOOTLOADER_ADDRESS = 3E000
+m2561: CFLAGS += -D_ANDROID_2561_ -DBAUDRATE=57600
+m2561: begin gccversion sizebefore build sizeafter end
+ mv $(TARGET).hex stk500boot_v2_android2561.hex
+
+
+############################################################
+# avrdude: Device signature = 0x1e9801
+# avrdude: safemode: lfuse reads as EC
+# avrdude: safemode: hfuse reads as 18
+# avrdude: safemode: efuse reads as FD
+# Aug 23, 2010 <MLS> Adding cerebot 2560 @ 8mhz
+#avrdude -P usb -c usbtiny -p m2560 -v -U flash:w:/Arduino/WiringBootV2_upd1/stk500boot_v2_cerebotplus.hex
+############################################################
+cerebot: MCU = atmega2560
+cerebot: F_CPU = 8000000
+cerebot: BOOTLOADER_ADDRESS = 3E000
+cerebot: CFLAGS += -D_CEREBOTPLUS_BOARD_ -DBAUDRATE=38400 -DUART_BAUDRATE_DOUBLE_SPEED=1
+cerebot: begin gccversion sizebefore build sizeafter end
+ mv $(TARGET).hex stk500boot_v2_cerebotplus.hex
+
+
+############################################################
+# Aug 23, 2010 <MLS> Adding atmega2561 support
+penguino: MCU = atmega32
+penguino: F_CPU = 16000000
+penguino: BOOTLOADER_ADDRESS = 7800
+penguino: CFLAGS += -D_PENGUINO_ -DBAUDRATE=57600
+penguino: begin gccversion sizebefore build sizeafter end
+ mv $(TARGET).hex stk500boot_v2_penguino.hex
+
+
+# Default target.
+all: begin gccversion sizebefore build sizeafter end
+
+build: elf hex eep lss sym
+#build: hex eep lss sym
+
+elf: $(TARGET).elf
+hex: $(TARGET).hex
+eep: $(TARGET).eep
+lss: $(TARGET).lss
+sym: $(TARGET).sym
+
+
+
+# Eye candy.
+# AVR Studio 3.x does not check make's exit code but relies on
+# the following magic strings to be generated by the compile job.
+begin:
+ @echo
+ @echo $(MSG_BEGIN)
+
+end:
+ @echo $(MSG_END)
+ @echo
+
+
+# Display size of file.
+HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
+ELFSIZE = $(SIZE) --format=avr --mcu=$(MCU) $(TARGET).elf
+
+sizebefore:
+ @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
+ 2>/dev/null; echo; fi
+
+sizeafter:
+ @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
+ 2>/dev/null; echo; fi
+
+
+
+# Display compiler version information.
+gccversion :
+ @$(CC) --version
+
+
+
+# Program the device.
+program: $(TARGET).hex $(TARGET).eep
+ $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
+
+
+# Generate avr-gdb config/init file which does the following:
+# define the reset signal, load the target file, connect to target, and set
+# a breakpoint at main().
+gdb-config:
+ @$(REMOVE) $(GDBINIT_FILE)
+ @echo define reset >> $(GDBINIT_FILE)
+ @echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
+ @echo end >> $(GDBINIT_FILE)
+ @echo file $(TARGET).elf >> $(GDBINIT_FILE)
+ @echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE)
+ifeq ($(DEBUG_BACKEND),simulavr)
+ @echo load >> $(GDBINIT_FILE)
+endif
+ @echo break main >> $(GDBINIT_FILE)
+
+debug: gdb-config $(TARGET).elf
+ifeq ($(DEBUG_BACKEND), avarice)
+ @echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
+ @$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
+ $(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
+ @$(WINSHELL) /c pause
+
+else
+ @$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
+ $(DEBUG_MFREQ) --port $(DEBUG_PORT)
+endif
+ @$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
+
+
+
+
+# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
+COFFCONVERT=$(OBJCOPY) --debugging \
+--change-section-address .data-0x800000 \
+--change-section-address .bss-0x800000 \
+--change-section-address .noinit-0x800000 \
+--change-section-address .eeprom-0x810000
+
+
+
+coff: $(TARGET).elf
+ @echo
+ @echo $(MSG_COFF) $(TARGET).cof
+ $(COFFCONVERT) -O coff-avr $< $(TARGET).cof
+
+
+extcoff: $(TARGET).elf
+ @echo
+ @echo $(MSG_EXTENDED_COFF) $(TARGET).cof
+ $(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
+
+
+# Create final output files (.hex, .eep) from ELF output file.
+%.hex: %.elf
+ @echo
+ @echo $(MSG_FLASH) $@
+ $(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
+
+%.eep: %.elf
+ @echo
+ @echo $(MSG_EEPROM) $@
+ -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
+ --change-section-lma .eeprom=0 -O $(FORMAT) $< $@
+
+# Create extended listing file from ELF output file.
+%.lss: %.elf
+ @echo
+ @echo $(MSG_EXTENDED_LISTING) $@
+ $(OBJDUMP) -h -S $< > $@
+
+# Create a symbol table from ELF output file.
+%.sym: %.elf
+ @echo
+ @echo $(MSG_SYMBOL_TABLE) $@
+ $(NM) -n $< > $@
+
+
+
+# Link: create ELF output file from object files.
+.SECONDARY : $(TARGET).elf
+.PRECIOUS : $(OBJ)
+%.elf: $(OBJ)
+ @echo
+ @echo $(MSG_LINKING) $@
+ $(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
+
+
+# Compile: create object files from C source files.
+%.o : %.c
+ @echo
+ @echo $(MSG_COMPILING) $<
+ $(CC) -c $(ALL_CFLAGS) $< -o $@
+
+
+# Compile: create assembler files from C source files.
+%.s : %.c
+ $(CC) -S $(ALL_CFLAGS) $< -o $@
+
+
+# Assemble: create object files from assembler source files.
+%.o : %.S
+ @echo
+ @echo $(MSG_ASSEMBLING) $<
+ $(CC) -c $(ALL_ASFLAGS) $< -o $@
+
+# Create preprocessed source for use in sending a bug report.
+%.i : %.c
+ $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
+
+
+# Target: clean project.
+clean: begin clean_list end
+
+clean_list :
+ @echo
+ @echo $(MSG_CLEANING)
+ $(REMOVE) *.hex
+ $(REMOVE) *.eep
+ $(REMOVE) *.cof
+ $(REMOVE) *.elf
+ $(REMOVE) *.map
+ $(REMOVE) *.sym
+ $(REMOVE) *.lss
+ $(REMOVE) $(OBJ)
+ $(REMOVE) $(LST)
+ $(REMOVE) $(SRC:.c=.s)
+ $(REMOVE) $(SRC:.c=.d)
+ $(REMOVE) .dep/*
+
+
+
+# Include the dependency files.
+-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
+
+
+# Listing of phony targets.
+.PHONY : all begin finish end sizebefore sizeafter gccversion \
+build elf hex eep lss sym coff extcoff \
+clean clean_list program debug gdb-config
+
diff --git a/test/ardmake/hardware/bootloaders/stk500v2/STK500V2.pnproj b/test/ardmake/hardware/bootloaders/stk500v2/STK500V2.pnproj new file mode 100644 index 0000000..d935019 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/stk500v2/STK500V2.pnproj @@ -0,0 +1 @@ +<Project name="STK500V2"><File path="License.txt"></File><File path="Makefile"></File><File path="stk500boot.c"></File><File path="command.h"></File><File path="Readme.txt"></File></Project>
\ No newline at end of file diff --git a/test/ardmake/hardware/bootloaders/stk500v2/STK500V2.pnps b/test/ardmake/hardware/bootloaders/stk500v2/STK500V2.pnps new file mode 100644 index 0000000..f85cde5 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/stk500v2/STK500V2.pnps @@ -0,0 +1 @@ +<pd><ViewState><e p="STK500V2" x="true"></e></ViewState></pd>
\ No newline at end of file diff --git a/test/ardmake/hardware/bootloaders/stk500v2/avrinterruptnames.h b/test/ardmake/hardware/bootloaders/stk500v2/avrinterruptnames.h new file mode 100644 index 0000000..0ae80f9 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/stk500v2/avrinterruptnames.h @@ -0,0 +1,742 @@ +//************************************************************************************************** +//* +//* interrupt vector names +//* +//* It is important to note that the vector numbers listed here +//* are the ATMEL documentation numbers. The Arduino numbers are 1 less +//* This is because the Atmel docs start numbering the interrupts at 1 +//* when it is actually vector #0 in the table. +//************************************************************************************************** +//* Jun 1, 2010 <MLS> Added support for ATmega1281 +//* Jun 30, 2010 <MLS> Putting in more ifdefs to conserve space +//* Jul 3, 2010 <MLS> More #ifdefs to conserve space and testing on most of my boards +//* Jul 4, 2010 <MLS> Started using vector defs for #ifdefs as defined in <avr/io.h> +//* Jul 13, 2010 <MLS> Added support for __AVR_ATmega128__ +//* Aug 26, 2010 <MLS> Added support for __AVR_ATmega2561__ +//************************************************************************************************** + +//#include "avrinterruptnames.h" + +//************************************************************************************************** +//* this defines the interrupt vectors and allows us to compile ONLY those strings that are actually +//* in the target CPU. This way we do not have to keep making changes based on cpu, it will be +//* automatic even if we add a new CPU +#ifndef _AVR_IO_H_ + #include <avr/io.h> +#endif +//************************************************************************************************** + +#ifdef __MWERKS__ + #define prog_char char + #define PGM_P char * +#endif + + prog_char gAvrInt_RESET[] PROGMEM = "RESET"; +#ifdef INT0_vect + prog_char gAvrInt_INT0[] PROGMEM = "INT0"; +#endif +#ifdef INT1_vect + prog_char gAvrInt_INT1[] PROGMEM = "INT1"; +#endif +#ifdef INT2_vect + prog_char gAvrInt_INT2[] PROGMEM = "INT2"; +#endif +#ifdef INT3_vect + prog_char gAvrInt_INT3[] PROGMEM = "INT3"; +#endif +#ifdef INT4_vect + prog_char gAvrInt_INT4[] PROGMEM = "INT4"; +#endif +#ifdef INT5_vect + prog_char gAvrInt_INT5[] PROGMEM = "INT5"; +#endif +#ifdef INT6_vect + prog_char gAvrInt_INT6[] PROGMEM = "INT6"; +#endif +#ifdef INT7_vect + prog_char gAvrInt_INT7[] PROGMEM = "INT7"; +#endif +#ifdef PCINT0_vect + prog_char gAvrInt_PCINT0[] PROGMEM = "PCINT0"; +#endif +#ifdef PCINT1_vect + prog_char gAvrInt_PCINT1[] PROGMEM = "PCINT1"; +#endif +#ifdef PCINT2_vect + prog_char gAvrInt_PCINT2[] PROGMEM = "PCINT2"; +#endif +#ifdef PCINT3_vect + prog_char gAvrInt_PCINT3[] PROGMEM = "PCINT3"; +#endif +#ifdef WDT_vect + prog_char gAvrInt_WDT[] PROGMEM = "WDT"; +#endif +#ifdef TIMER0_COMP_vect + prog_char gAvrInt_TIMER0_COMP[] PROGMEM = "TIMER0 COMP"; +#endif +#ifdef TIMER0_COMPA_vect + prog_char gAvrInt_TIMER0_COMPA[] PROGMEM = "TIMER0 COMPA"; +#endif +#ifdef TIMER0_COMPB_vect + prog_char gAvrInt_TIMER0_COMPB[] PROGMEM = "TIMER0 COMPB"; +#endif +#ifdef TIMER0_OVF_vect + prog_char gAvrInt_TIMER0_OVF[] PROGMEM = "TIMER0 OVF"; +#endif +#ifdef TIMER1_CAPT_vect + prog_char gAvrInt_TIMER1_CAPT[] PROGMEM = "TIMER1 CAPT"; +#endif +#ifdef TIMER1_COMPA_vect + prog_char gAvrInt_TIMER1_COMPA[] PROGMEM = "TIMER1 COMPA"; +#endif +#ifdef TIMER1_COMPB_vect + prog_char gAvrInt_TIMER1_COMPB[] PROGMEM = "TIMER1 COMPB"; +#endif +#ifdef TIMER1_COMPC_vect + prog_char gAvrInt_TIMER1_COMPC[] PROGMEM = "TIMER1 COMPC"; +#endif +#ifdef TIMER1_OVF_vect + prog_char gAvrInt_TIMER1_OVF[] PROGMEM = "TIMER1 OVF"; +#endif +#ifdef TIMER2_COMP_vect + prog_char gAvrInt_TIMER2_COMP[] PROGMEM = "TIMER2 COMP"; +#endif +#ifdef TIMER2_COMPA_vect + prog_char gAvrInt_TIMER2_COMPA[] PROGMEM = "TIMER2 COMPA"; +#endif +#ifdef TIMER2_COMPB_vect + prog_char gAvrInt_TIMER2_COMPB[] PROGMEM = "TIMER2 COMPB"; +#endif +#ifdef TIMER2_OVF_vect + prog_char gAvrInt_TIMER2_OVF[] PROGMEM = "TIMER2 OVF"; +#endif +#ifdef TIMER3_CAPT_vect + prog_char gAvrInt_TIMER3_CAPT[] PROGMEM = "TIMER3 CAPT"; +#endif +#ifdef TIMER3_COMPA_vect + prog_char gAvrInt_TIMER3_COMPA[] PROGMEM = "TIMER3 COMPA"; +#endif +#ifdef TIMER3_COMPB_vect + prog_char gAvrInt_TIMER3_COMPB[] PROGMEM = "TIMER3 COMPB"; +#endif +#ifdef TIMER3_COMPC_vect + prog_char gAvrInt_TIMER3_COMPC[] PROGMEM = "TIMER3 COMPC"; +#endif +#ifdef TIMER3_OVF_vect + prog_char gAvrInt_TIMER3_OVF[] PROGMEM = "TIMER3 OVF"; +#endif +#ifdef TIMER4_CAPT_vect + prog_char gAvrInt_TIMER4_CAPT[] PROGMEM = "TIMER4 CAPT"; +#endif +#ifdef TIMER4_COMPA_vect + prog_char gAvrInt_TIMER4_COMPA[] PROGMEM = "TIMER4 COMPA"; +#endif +#ifdef TIMER4_COMPB_vect + prog_char gAvrInt_TIMER4_COMPB[] PROGMEM = "TIMER4 COMPB"; +#endif +#ifdef TIMER4_COMPC_vect + prog_char gAvrInt_TIMER4_COMPC[] PROGMEM = "TIMER4 COMPC"; +#endif +#ifdef TIMER4_COMPD_vect + prog_char gAvrInt_TIMER4_COMPD[] PROGMEM = "TIMER4 COMPD"; +#endif +#ifdef TIMER4_OVF_vect + prog_char gAvrInt_TIMER4_OVF[] PROGMEM = "TIMER4 OVF"; +#endif +#ifdef TIMER4_FPF_vect + prog_char gAvrInt_TIMER4_FPF[] PROGMEM = "TIMER4 Fault Protection"; +#endif +#ifdef TIMER5_CAPT_vect + prog_char gAvrInt_TIMER5_CAPT[] PROGMEM = "TIMER5 CAPT"; +#endif +#ifdef TIMER5_COMPA_vect + prog_char gAvrInt_TIMER5_COMPA[] PROGMEM = "TIMER5 COMPA"; +#endif +#ifdef TIMER5_COMPB_vect + prog_char gAvrInt_TIMER5_COMPB[] PROGMEM = "TIMER5 COMPB"; +#endif +#ifdef TIMER5_COMPC_vect + prog_char gAvrInt_TIMER5_COMPC[] PROGMEM = "TIMER5 COMPC"; +#endif +#ifdef TIMER5_OVF_vect + prog_char gAvrInt_TIMER5_OVF[] PROGMEM = "TIMER5 OVF"; +#endif + +//* when there is only 1 usart +#if defined(USART_RX_vect) || defined(USART_RXC_vect) + prog_char gAvrInt_USART_RX[] PROGMEM = "USART RX"; +#endif +#if defined(USART_UDRE_vect) + prog_char gAvrInt_USART_UDRE[] PROGMEM = "USART UDRE"; +#endif +#if defined(USART_TX_vect) || defined(USART_TXC_vect) + prog_char gAvrInt_USART_TX[] PROGMEM = "USART TX"; +#endif + + +//* usart 0 +#if defined(USART0_RX_vect) + prog_char gAvrInt_USART0_RX[] PROGMEM = "USART0 RX"; +#endif +#if defined(USART0_UDRE_vect) + prog_char gAvrInt_USART0_UDRE[] PROGMEM = "USART0 UDRE"; +#endif +#if defined(USART0_TX_vect) + prog_char gAvrInt_USART0_TX[] PROGMEM = "USART0 TX"; +#endif + + +//* usart 1 +#ifdef USART1_RX_vect + prog_char gAvrInt_USART1_RX[] PROGMEM = "USART1 RX"; +#endif +#ifdef USART1_UDRE_vect + prog_char gAvrInt_USART1_UDRE[] PROGMEM = "USART1 UDRE"; +#endif +#ifdef USART1_TX_vect + prog_char gAvrInt_USART1_TX[] PROGMEM = "USART1 TX"; +#endif + +//* usart 2 +#ifdef USART2_RX_vect + prog_char gAvrInt_USART2_RX[] PROGMEM = "USART2 RX"; +#endif +#ifdef USART2_UDRE_vect + prog_char gAvrInt_USART2_UDRE[] PROGMEM = "USART2 UDRE"; +#endif +#ifdef USART2_TX_vect + prog_char gAvrInt_USART2_TX[] PROGMEM = "USART2 TX"; +#endif + +//* usart 3 +#ifdef USART3_RX_vect + prog_char gAvrInt_USART3_RX[] PROGMEM = "USART3 RX"; +#endif +#ifdef USART3_UDRE_vect + prog_char gAvrInt_USART3_UDRE[] PROGMEM = "USART3 UDRE"; +#endif +#ifdef USART3_TX_vect + prog_char gAvrInt_USART3_TX[] PROGMEM = "USART3 TX"; +#endif +#ifdef SPI_STC_vect + prog_char gAvrInt_SPI_STC[] PROGMEM = "SPI STC"; +#endif +#ifdef ADC_vect + prog_char gAvrInt_ADC[] PROGMEM = "ADC"; +#endif +#if defined(ANALOG_COMP_vect) || defined(ANA_COMP_vect) + prog_char gAvrInt_ANALOG_COMP[] PROGMEM = "ANALOG COMP"; +#endif +#if defined(EE_READY_vect) || defined(EE_RDY_vect) + prog_char gAvrInt_EE_READY[] PROGMEM = "EE READY"; +#endif +#ifdef TWI_vect + prog_char gAvrInt_TWI[] PROGMEM = "TWI"; +#endif +#if defined(SPM_READY_vect) || defined(SPM_RDY_vect) + prog_char gAvrInt_SPM_READY[] PROGMEM = "SPM READY"; +#endif +#ifdef USI_START_vect + prog_char gAvrInt_USI_START[] PROGMEM = "USI START"; +#endif +#ifdef USI_OVERFLOW_vect + prog_char gAvrInt_USI_OVERFLOW[] PROGMEM = "USI OVERFLOW"; +#endif +#ifdef USB_GEN_vect + prog_char gAvrInt_USB_General[] PROGMEM = "USB General"; +#endif +#ifdef USB_COM_vect + prog_char gAvrInt_USB_Endpoint[] PROGMEM = "USB Endpoint"; +#endif + +#ifdef LCD_vect + prog_char gAvrInt_LCD_StartFrame[] PROGMEM = "LCD Start of Frame"; +#endif + + +//************************************************************************************************** +//* these do not have vector defs and have to be done by CPU type +#if defined(__AVR_ATmega645__ ) || defined(__AVR_ATmega1281__) || defined(__AVR_ATmega2561__) + prog_char gAvrInt_NOT_USED[] PROGMEM = "NOT_USED"; +#endif +#if defined(__AVR_ATmega32U4__) + prog_char gAvrInt_RESERVED[] PROGMEM = "Reserved"; +#endif + + prog_char gAvrInt_END[] PROGMEM = "*"; + + + + + +//************************************************************************************************** +#if defined(__AVR_ATmega168__) || defined(__AVR_ATmega328P__) +#pragma mark __AVR_ATmega168__ / __AVR_ATmega328P__ + +#define _INTERRUPT_NAMES_DEFINED_ + +PGM_P gInterruptNameTable[] PROGMEM = +{ + + gAvrInt_RESET, // 1 + gAvrInt_INT0, // 2 + gAvrInt_INT1, // 3 + gAvrInt_PCINT0, // 4 + gAvrInt_PCINT1, // 5 + gAvrInt_PCINT2, // 6 + gAvrInt_WDT, // 7 + gAvrInt_TIMER2_COMPA, // 8 + gAvrInt_TIMER2_COMPB, // 9 + gAvrInt_TIMER2_OVF, // 10 + gAvrInt_TIMER1_CAPT, // 11 + gAvrInt_TIMER1_COMPA, // 12 + gAvrInt_TIMER1_COMPB, // 13 + gAvrInt_TIMER1_OVF, // 14 + gAvrInt_TIMER0_COMPA, // 15 + gAvrInt_TIMER0_COMPB, // 16 + gAvrInt_TIMER0_OVF, // 17 + gAvrInt_SPI_STC, // 18 + gAvrInt_USART_RX, // 19 + gAvrInt_USART_UDRE, // 20 + gAvrInt_USART_TX, // 21 + gAvrInt_ADC, // 22 + gAvrInt_EE_READY, // 23 + gAvrInt_ANALOG_COMP, // 24 + gAvrInt_TWI, // 25 + gAvrInt_SPM_READY, // 26 +}; + +#endif + +//************************************************************************************************** +#pragma mark __AVR_ATmega169__ +#if defined(__AVR_ATmega169__) + +#define _INTERRUPT_NAMES_DEFINED_ + +PGM_P gInterruptNameTable[] PROGMEM = +{ + + gAvrInt_RESET, // 1 + gAvrInt_INT0, // 2 + gAvrInt_PCINT0, // 3 + gAvrInt_PCINT1, // 4 + gAvrInt_TIMER2_COMP, // 5 + gAvrInt_TIMER2_OVF, // 6 + gAvrInt_TIMER1_CAPT, // 7 + gAvrInt_TIMER1_COMPA, // 8 + gAvrInt_TIMER1_COMPB, // 9 + gAvrInt_TIMER1_OVF, // 10 + gAvrInt_TIMER0_COMP, // 11 + gAvrInt_TIMER0_OVF, // 12 + gAvrInt_SPI_STC, // 13 + gAvrInt_USART0_RX, // 14 + gAvrInt_USART0_UDRE, // 15 + gAvrInt_USART0_TX, // 16 + gAvrInt_USI_START, // 17 + gAvrInt_USI_OVERFLOW, // 18 + gAvrInt_ANALOG_COMP, // 19 + gAvrInt_ADC, // 20 + gAvrInt_EE_READY, // 21 + gAvrInt_SPM_READY, // 22 + gAvrInt_LCD_StartFrame, // 23 + +}; + +#endif + + +//************************************************************************************************** +#if defined(__AVR_ATmega640__) || defined(__AVR_ATmega1280__) || defined(__AVR_ATmega1281__) || defined(__AVR_ATmega2560__) || defined(__AVR_ATmega2561__) +#pragma mark __AVR_ATmega640__ __AVR_ATmega1280__ __AVR_ATmega1281__ __AVR_ATmega2560__ __AVR_ATmega2561__ + +#define _INTERRUPT_NAMES_DEFINED_ + +PGM_P gInterruptNameTable[] PROGMEM = +{ + + gAvrInt_RESET, // 1 + gAvrInt_INT0, // 2 + gAvrInt_INT1, // 3 + gAvrInt_INT2, // 4 + gAvrInt_INT3, // 5 + gAvrInt_INT4, // 6 + gAvrInt_INT5, // 7 + gAvrInt_INT6, // 8 + gAvrInt_INT7, // 9 + gAvrInt_PCINT0, // 10 + gAvrInt_PCINT1, // 11 +#if defined(__AVR_ATmega640__) || defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) + gAvrInt_PCINT2, // 12 +#else + gAvrInt_NOT_USED, // 12 +#endif + gAvrInt_WDT, // 13 + gAvrInt_TIMER2_COMPA, // 14 + gAvrInt_TIMER2_COMPB, // 15 + gAvrInt_TIMER2_OVF, // 16 + gAvrInt_TIMER1_CAPT, // 17 + gAvrInt_TIMER1_COMPA, // 18 + gAvrInt_TIMER1_COMPB, // 19 + gAvrInt_TIMER1_COMPC, // 20 + gAvrInt_TIMER1_OVF, // 21 + gAvrInt_TIMER0_COMPA, // 22 + gAvrInt_TIMER0_COMPB, // 23 + gAvrInt_TIMER0_OVF, // 24 + gAvrInt_SPI_STC, // 25 + + gAvrInt_USART0_RX, // 26 + gAvrInt_USART0_UDRE, // 27 + gAvrInt_USART0_TX, // 28 + gAvrInt_ANALOG_COMP, // 29 + gAvrInt_ADC, // 30 + gAvrInt_EE_READY, // 31 + + gAvrInt_TIMER3_CAPT, // 32 + gAvrInt_TIMER3_COMPA, // 33 + gAvrInt_TIMER3_COMPB, // 34 + gAvrInt_TIMER3_COMPC, // 35 + gAvrInt_TIMER3_OVF, // 36 + + gAvrInt_USART1_RX, // 37 + gAvrInt_USART1_UDRE, // 38 + gAvrInt_USART1_TX, // 39 + gAvrInt_TWI, // 40 + gAvrInt_SPM_READY, // 41 +#if defined(__AVR_ATmega640__) || defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) + gAvrInt_TIMER4_CAPT, // 42 +#else + gAvrInt_NOT_USED, // 42 +#endif + gAvrInt_TIMER4_COMPA, // 43 + gAvrInt_TIMER4_COMPB, // 44 + gAvrInt_TIMER4_COMPC, // 45 + gAvrInt_TIMER4_OVF, // 46 +#if defined(__AVR_ATmega640__) || defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) + gAvrInt_TIMER5_CAPT, // 47 +#else + gAvrInt_NOT_USED, // 47 +#endif + gAvrInt_TIMER5_COMPA, // 48 + gAvrInt_TIMER5_COMPB, // 49 + gAvrInt_TIMER5_COMPC, // 50 + gAvrInt_TIMER5_OVF, // 51 + +#if defined(__AVR_ATmega640__) || defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) + gAvrInt_USART2_RX, // 52 + gAvrInt_USART2_UDRE, // 53 + gAvrInt_USART2_TX, // 54 + + gAvrInt_USART3_RX, // 55 + gAvrInt_USART3_UDRE, // 56 + gAvrInt_USART3_TX, // 57 +#endif + +}; + +#endif + + + +//************************************************************************************************** +#if defined(__AVR_ATmega324P__ ) || defined(__AVR_ATmega644__ ) || defined(__AVR_ATmega644P__) || defined(__AVR_ATmega1284P__) +#pragma mark __AVR_ATmega324P__ __AVR_ATmega644__ __AVR_ATmega644P__ __AVR_ATmega1284P__ + +#define _INTERRUPT_NAMES_DEFINED_ + +PGM_P gInterruptNameTable[] PROGMEM = +{ + + gAvrInt_RESET, // 1 + gAvrInt_INT0, // 2 + gAvrInt_INT1, // 3 + gAvrInt_INT2, // 4 + gAvrInt_PCINT0, // 5 + gAvrInt_PCINT1, // 6 + gAvrInt_PCINT2, // 7 + gAvrInt_PCINT3, // 8 + gAvrInt_WDT, // 9 + gAvrInt_TIMER2_COMPA, // 10 + gAvrInt_TIMER2_COMPB, // 11 + gAvrInt_TIMER2_OVF, // 12 + gAvrInt_TIMER1_CAPT, // 13 + gAvrInt_TIMER1_COMPA, // 14 + gAvrInt_TIMER1_COMPB, // 15 + gAvrInt_TIMER1_OVF, // 16 + gAvrInt_TIMER0_COMPA, // 17 + gAvrInt_TIMER0_COMPB, // 18 + gAvrInt_TIMER0_OVF, // 19 + gAvrInt_SPI_STC, // 20 + gAvrInt_USART0_RX, // 21 + gAvrInt_USART0_UDRE, // 22 + gAvrInt_USART0_TX, // 23 + gAvrInt_ANALOG_COMP, // 24 + gAvrInt_ADC, // 25 + gAvrInt_EE_READY, // 26 + gAvrInt_TWI, // 27 + gAvrInt_SPM_READY, // 28 + +#if defined(__AVR_ATmega324P__ ) || defined(__AVR_ATmega644P__) + gAvrInt_USART1_RX, // 29 + gAvrInt_USART1_UDRE, // 30 + gAvrInt_USART1_TX, // 31 +#endif + +}; + + +#endif + +//************************************************************************************************** +#if defined(__AVR_ATmega645__ ) +#pragma mark __AVR_ATmega645__ + +#define _INTERRUPT_NAMES_DEFINED_ + +PGM_P gInterruptNameTable[] PROGMEM = +{ + + gAvrInt_RESET, // 1 + gAvrInt_INT0, // 2 + gAvrInt_PCINT0, // 3 + gAvrInt_PCINT1, // 4 + gAvrInt_TIMER2_COMP, // 5 + gAvrInt_TIMER2_OVF, // 6 + gAvrInt_TIMER1_CAPT, // 7 + gAvrInt_TIMER1_COMPA, // 8 + gAvrInt_TIMER1_COMPB, // 9 + gAvrInt_TIMER1_OVF, // 10 + gAvrInt_TIMER0_COMP, // 11 + gAvrInt_TIMER0_OVF, // 12 + gAvrInt_SPI_STC, // 13 + gAvrInt_USART0_RX, // 14 + gAvrInt_USART0_UDRE, // 15 + gAvrInt_USART0_TX, // 16 + gAvrInt_USI_START, // 17 + gAvrInt_USI_OVERFLOW, // 18 + gAvrInt_ANALOG_COMP, // 19 + gAvrInt_ADC, // 20 + gAvrInt_EE_READY, // 21 + gAvrInt_SPM_READY, // 22 + gAvrInt_NOT_USED, // 23 + +#if defined(__AVR_ATmega3250__) || defined(__AVR_ATmega6450__) + gAvrInt_PCINT2, // 24 + gAvrInt_PCINT3, // 25 +#endif +}; + + +#endif + + +//************************************************************************************************** +#if defined(__AVR_ATmega32__ ) +#pragma mark __AVR_ATmega32__ + +#define _INTERRUPT_NAMES_DEFINED_ + +PGM_P gInterruptNameTable[] PROGMEM = +{ + + gAvrInt_RESET, // 1 + gAvrInt_INT0, // 2 + gAvrInt_INT1, // 3 + gAvrInt_INT2, // 4 + gAvrInt_TIMER2_COMP, // 5 + gAvrInt_TIMER2_OVF, // 6 + gAvrInt_TIMER1_CAPT, // 7 + gAvrInt_TIMER1_COMPA, // 8 + gAvrInt_TIMER1_COMPB, // 9 + gAvrInt_TIMER1_OVF, // 10 + gAvrInt_TIMER0_COMP, // 11 + gAvrInt_TIMER0_OVF, // 12 + gAvrInt_SPI_STC, // 13 + gAvrInt_USART_RX, // 14 + gAvrInt_USART_UDRE, // 15 + gAvrInt_USART_TX, // 16 + gAvrInt_ADC, // 17 + gAvrInt_EE_READY, // 18 + gAvrInt_ANALOG_COMP, // 19 + gAvrInt_TWI, // 20 + gAvrInt_SPM_READY, // 21 + +}; + + +#endif + +//************************************************************************************************** +#if defined(__AVR_ATmega32U4__) +#pragma mark __AVR_ATmega32U4__ +//* teensy 2.0 +//* http://www.pjrc.com/teensy/pinout.html +#define _INTERRUPT_NAMES_DEFINED_ + + +PGM_P gInterruptNameTable[] PROGMEM = +{ + + gAvrInt_RESET, // 1 + gAvrInt_INT0, // 2 + gAvrInt_INT1, // 3 + gAvrInt_INT2, // 4 + gAvrInt_INT3, // 5 + gAvrInt_RESERVED, // 6 + gAvrInt_RESERVED, // 7 + gAvrInt_INT6, // 8 + gAvrInt_RESERVED, // 9 + gAvrInt_PCINT0, // 10 + gAvrInt_USB_General, // 11 + gAvrInt_USB_Endpoint, // 12 + gAvrInt_WDT, // 13 + gAvrInt_RESERVED, // 14 + gAvrInt_RESERVED, // 15 + gAvrInt_RESERVED, // 16 + gAvrInt_TIMER1_CAPT, // 17 + gAvrInt_TIMER1_COMPA, // 18 + gAvrInt_TIMER1_COMPB, // 19 + gAvrInt_TIMER1_COMPC, // 20 + gAvrInt_TIMER1_OVF, // 21 + gAvrInt_TIMER0_COMPA, // 22 + gAvrInt_TIMER0_COMPB, // 23 + gAvrInt_TIMER0_OVF, // 24 + gAvrInt_SPI_STC, // 25 + + gAvrInt_USART1_RX, // 26 + gAvrInt_USART1_UDRE, // 27 + gAvrInt_USART1_TX, // 28 + gAvrInt_ANALOG_COMP, // 29 + + gAvrInt_ADC, // 30 + gAvrInt_EE_READY, // 31 + + gAvrInt_TIMER3_CAPT, // 32 + gAvrInt_TIMER3_COMPA, // 33 + gAvrInt_TIMER3_COMPB, // 34 + gAvrInt_TIMER3_COMPC, // 35 + gAvrInt_TIMER3_OVF, // 36 + gAvrInt_TWI, // 37 + gAvrInt_SPM_READY, // 38 + + gAvrInt_TIMER4_COMPA, // 39 + gAvrInt_TIMER4_COMPB, // 40 + gAvrInt_TIMER4_COMPD, // 41 + gAvrInt_TIMER4_OVF, // 42 + gAvrInt_TIMER4_FPF, // 43 +}; + +#endif + +//************************************************************************************************** +#if defined(__AVR_AT90USB1286__) +#pragma mark __AVR_AT90USB1286__ +//* teensy++ 2.0 +//* http://www.pjrc.com/teensy/pinout.html +#define _INTERRUPT_NAMES_DEFINED_ + + +PGM_P gInterruptNameTable[] PROGMEM = +{ + + gAvrInt_RESET, // 1 + gAvrInt_INT0, // 2 + gAvrInt_INT1, // 3 + gAvrInt_INT2, // 4 + gAvrInt_INT3, // 5 + gAvrInt_INT4, // 6 + gAvrInt_INT5, // 7 + gAvrInt_INT6, // 8 + gAvrInt_INT7, // 9 + gAvrInt_PCINT0, // 10 + gAvrInt_USB_General, // 11 + gAvrInt_USB_Endpoint, // 12 + gAvrInt_WDT, // 13 + gAvrInt_TIMER2_COMPA, // 14 + gAvrInt_TIMER2_COMPB, // 15 + gAvrInt_TIMER2_OVF, // 16 + gAvrInt_TIMER1_CAPT, // 17 + gAvrInt_TIMER1_COMPA, // 18 + gAvrInt_TIMER1_COMPB, // 19 + gAvrInt_TIMER1_COMPC, // 20 + gAvrInt_TIMER1_OVF, // 21 + gAvrInt_TIMER0_COMPA, // 22 + gAvrInt_TIMER0_COMPB, // 23 + gAvrInt_TIMER0_OVF, // 24 + gAvrInt_SPI_STC, // 25 + + gAvrInt_USART1_RX, // 26 + gAvrInt_USART1_UDRE, // 27 + gAvrInt_USART1_TX, // 28 + gAvrInt_ANALOG_COMP, // 29 + + gAvrInt_ADC, // 30 + gAvrInt_EE_READY, // 31 + + gAvrInt_TIMER3_CAPT, // 32 + gAvrInt_TIMER3_COMPA, // 33 + gAvrInt_TIMER3_COMPB, // 34 + gAvrInt_TIMER3_COMPC, // 35 + gAvrInt_TIMER3_OVF, // 36 + gAvrInt_TWI, // 37 + gAvrInt_SPM_READY, // 38 + +}; + +#endif + + + + +//************************************************************************************************** +#if defined(__AVR_ATmega128__) +#pragma mark __AVR_ATmega128__ +#define _INTERRUPT_NAMES_DEFINED_ + + +PGM_P gInterruptNameTable[] PROGMEM = +{ + + gAvrInt_RESET, // 1 + gAvrInt_INT0, // 2 + gAvrInt_INT1, // 3 + gAvrInt_INT2, // 4 + gAvrInt_INT3, // 5 + gAvrInt_INT4, // 6 + gAvrInt_INT5, // 7 + gAvrInt_INT6, // 8 + gAvrInt_INT7, // 9 + gAvrInt_TIMER2_COMP, // 10 + gAvrInt_TIMER2_OVF, // 11 + gAvrInt_TIMER1_CAPT, // 12 + gAvrInt_TIMER1_COMPA, // 13 + gAvrInt_TIMER1_COMPB, // 14 + gAvrInt_TIMER1_OVF, // 15 + gAvrInt_TIMER0_COMP, // 16 + gAvrInt_TIMER0_OVF, // 17 + gAvrInt_SPI_STC, // 18 + gAvrInt_USART0_RX, // 19 + gAvrInt_USART0_UDRE, // 20 + gAvrInt_USART0_TX, // 21 + gAvrInt_ADC, // 22 + gAvrInt_EE_READY, // 23 + gAvrInt_ANALOG_COMP, // 24 + gAvrInt_TIMER1_COMPC, // 25 + gAvrInt_TIMER3_CAPT, // 26 + gAvrInt_TIMER3_COMPA, // 27 + gAvrInt_TIMER3_COMPB, // 28 + gAvrInt_TIMER3_COMPC, // 29 + gAvrInt_TIMER3_OVF, // 30 + gAvrInt_USART1_RX, // 31 + gAvrInt_USART1_UDRE, // 32 + gAvrInt_USART1_TX, // 33 + gAvrInt_TWI, // 34 + gAvrInt_SPM_READY, // 35 + +}; + +#endif + +#if !defined(_INTERRUPT_NAMES_DEFINED_) + #warning No interrupt string defs for this cpu +#endif
\ No newline at end of file diff --git a/test/ardmake/hardware/bootloaders/stk500v2/command.h b/test/ardmake/hardware/bootloaders/stk500v2/command.h new file mode 100644 index 0000000..03b1b38 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/stk500v2/command.h @@ -0,0 +1,114 @@ +//**** ATMEL AVR - A P P L I C A T I O N N O T E ************************ +//* +//* Title: AVR068 - STK500 Communication Protocol +//* Filename: command.h +//* Version: 1.0 +//* Last updated: 31.01.2005 +//* +//* Support E-mail: avr@atmel.com +//* +//************************************************************************** + +// *****************[ STK message constants ]*************************** + +#define MESSAGE_START 0x1B //= ESC = 27 decimal +#define TOKEN 0x0E + +// *****************[ STK general command constants ]************************** + +#define CMD_SIGN_ON 0x01 +#define CMD_SET_PARAMETER 0x02 +#define CMD_GET_PARAMETER 0x03 +#define CMD_SET_DEVICE_PARAMETERS 0x04 +#define CMD_OSCCAL 0x05 +#define CMD_LOAD_ADDRESS 0x06 +#define CMD_FIRMWARE_UPGRADE 0x07 + + +// *****************[ STK ISP command constants ]****************************** + +#define CMD_ENTER_PROGMODE_ISP 0x10 +#define CMD_LEAVE_PROGMODE_ISP 0x11 +#define CMD_CHIP_ERASE_ISP 0x12 +#define CMD_PROGRAM_FLASH_ISP 0x13 +#define CMD_READ_FLASH_ISP 0x14 +#define CMD_PROGRAM_EEPROM_ISP 0x15 +#define CMD_READ_EEPROM_ISP 0x16 +#define CMD_PROGRAM_FUSE_ISP 0x17 +#define CMD_READ_FUSE_ISP 0x18 +#define CMD_PROGRAM_LOCK_ISP 0x19 +#define CMD_READ_LOCK_ISP 0x1A +#define CMD_READ_SIGNATURE_ISP 0x1B +#define CMD_READ_OSCCAL_ISP 0x1C +#define CMD_SPI_MULTI 0x1D + +// *****************[ STK PP command constants ]******************************* + +#define CMD_ENTER_PROGMODE_PP 0x20 +#define CMD_LEAVE_PROGMODE_PP 0x21 +#define CMD_CHIP_ERASE_PP 0x22 +#define CMD_PROGRAM_FLASH_PP 0x23 +#define CMD_READ_FLASH_PP 0x24 +#define CMD_PROGRAM_EEPROM_PP 0x25 +#define CMD_READ_EEPROM_PP 0x26 +#define CMD_PROGRAM_FUSE_PP 0x27 +#define CMD_READ_FUSE_PP 0x28 +#define CMD_PROGRAM_LOCK_PP 0x29 +#define CMD_READ_LOCK_PP 0x2A +#define CMD_READ_SIGNATURE_PP 0x2B +#define CMD_READ_OSCCAL_PP 0x2C + +#define CMD_SET_CONTROL_STACK 0x2D + +// *****************[ STK HVSP command constants ]***************************** + +#define CMD_ENTER_PROGMODE_HVSP 0x30 +#define CMD_LEAVE_PROGMODE_HVSP 0x31 +#define CMD_CHIP_ERASE_HVSP 0x32 +#define CMD_PROGRAM_FLASH_HVSP ` 0x33 +#define CMD_READ_FLASH_HVSP 0x34 +#define CMD_PROGRAM_EEPROM_HVSP 0x35 +#define CMD_READ_EEPROM_HVSP 0x36 +#define CMD_PROGRAM_FUSE_HVSP 0x37 +#define CMD_READ_FUSE_HVSP 0x38 +#define CMD_PROGRAM_LOCK_HVSP 0x39 +#define CMD_READ_LOCK_HVSP 0x3A +#define CMD_READ_SIGNATURE_HVSP 0x3B +#define CMD_READ_OSCCAL_HVSP 0x3C + +// *****************[ STK status constants ]*************************** + +// Success +#define STATUS_CMD_OK 0x00 + +// Warnings +#define STATUS_CMD_TOUT 0x80 +#define STATUS_RDY_BSY_TOUT 0x81 +#define STATUS_SET_PARAM_MISSING 0x82 + +// Errors +#define STATUS_CMD_FAILED 0xC0 +#define STATUS_CKSUM_ERROR 0xC1 +#define STATUS_CMD_UNKNOWN 0xC9 + +// *****************[ STK parameter constants ]*************************** +#define PARAM_BUILD_NUMBER_LOW 0x80 +#define PARAM_BUILD_NUMBER_HIGH 0x81 +#define PARAM_HW_VER 0x90 +#define PARAM_SW_MAJOR 0x91 +#define PARAM_SW_MINOR 0x92 +#define PARAM_VTARGET 0x94 +#define PARAM_VADJUST 0x95 +#define PARAM_OSC_PSCALE 0x96 +#define PARAM_OSC_CMATCH 0x97 +#define PARAM_SCK_DURATION 0x98 +#define PARAM_TOPCARD_DETECT 0x9A +#define PARAM_STATUS 0x9C +#define PARAM_DATA 0x9D +#define PARAM_RESET_POLARITY 0x9E +#define PARAM_CONTROLLER_INIT 0x9F + +// *****************[ STK answer constants ]*************************** + +#define ANSWER_CKSUM_ERROR 0xB0 + diff --git a/test/ardmake/hardware/bootloaders/stk500v2/stk500boot.c b/test/ardmake/hardware/bootloaders/stk500v2/stk500boot.c new file mode 100644 index 0000000..13dec89 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/stk500v2/stk500boot.c @@ -0,0 +1,1996 @@ +/***************************************************************************** +Title: STK500v2 compatible bootloader + Modified for Wiring board ATMega128-16MHz +Author: Peter Fleury <pfleury@gmx.ch> http://jump.to/fleury +File: $Id: stk500boot.c,v 1.11 2006/06/25 12:39:17 peter Exp $ +Compiler: avr-gcc 3.4.5 or 4.1 / avr-libc 1.4.3 +Hardware: All AVRs with bootloader support, tested with ATmega8 +License: GNU General Public License + +Modified: Worapoht Kornkaewwattanakul <dev@avride.com> http://www.avride.com +Date: 17 October 2007 +Update: 1st, 29 Dec 2007 : Enable CMD_SPI_MULTI but ignore unused command by return 0x00 byte response.. +Compiler: WINAVR20060421 +Description: add timeout feature like previous Wiring bootloader + +DESCRIPTION: + This program allows an AVR with bootloader capabilities to + read/write its own Flash/EEprom. To enter Programming mode + an input pin is checked. If this pin is pulled low, programming mode + is entered. If not, normal execution is done from $0000 + "reset" vector in Application area. + Size fits into a 1024 word bootloader section + when compiled with avr-gcc 4.1 + (direct replace on Wiring Board without fuse setting changed) + +USAGE: + - Set AVR MCU type and clock-frequency (F_CPU) in the Makefile. + - Set baud rate below (AVRISP only works with 115200 bps) + - compile/link the bootloader with the supplied Makefile + - program the "Boot Flash section size" (BOOTSZ fuses), + for boot-size 1024 words: program BOOTSZ01 + - enable the BOOT Reset Vector (program BOOTRST) + - Upload the hex file to the AVR using any ISP programmer + - Program Boot Lock Mode 3 (program BootLock 11 and BootLock 12 lock bits) // (leave them) + - Reset your AVR while keeping PROG_PIN pulled low // (for enter bootloader by switch) + - Start AVRISP Programmer (AVRStudio/Tools/Program AVR) + - AVRISP will detect the bootloader + - Program your application FLASH file and optional EEPROM file using AVRISP + +Note: + Erasing the device without flashing, through AVRISP GUI button "Erase Device" + is not implemented, due to AVRStudio limitations. + Flash is always erased before programming. + + AVRdude: + Please uncomment #define REMOVE_CMD_SPI_MULTI when using AVRdude. + Comment #define REMOVE_PROGRAM_LOCK_BIT_SUPPORT to reduce code size + Read Fuse Bits and Read/Write Lock Bits is not supported + +NOTES: + Based on Atmel Application Note AVR109 - Self-programming + Based on Atmel Application Note AVR068 - STK500v2 Protocol + +LICENSE: + Copyright (C) 2006 Peter Fleury + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + +*****************************************************************************/ + +//************************************************************************ +//* Edit History +//************************************************************************ +//* Jul 7, 2010 <MLS> = Mark Sproul msproul@skycharoit.com +//* Jul 7, 2010 <MLS> Working on mega2560. No Auto-restart +//* Jul 7, 2010 <MLS> Switched to 8K bytes (4K words) so that we have room for the monitor +//* Jul 8, 2010 <MLS> Found older version of source that had auto restart, put that code back in +//* Jul 8, 2010 <MLS> Adding monitor code +//* Jul 11, 2010 <MLS> Added blinking LED while waiting for download to start +//* Jul 11, 2010 <MLS> Added EEPROM test +//* Jul 29, 2010 <MLS> Added recchar_timeout for timing out on bootloading +//* Aug 23, 2010 <MLS> Added support for atmega2561 +//* Aug 26, 2010 <MLS> Removed support for BOOT_BY_SWITCH +//************************************************************************ + + + +#include <inttypes.h> +#include <avr/io.h> +#include <avr/interrupt.h> +#include <avr/boot.h> +#include <avr/pgmspace.h> +#include <util/delay.h> +#include <avr/eeprom.h> +#include <avr/common.h> +#include <stdlib.h> +#include "command.h" + + +#if defined(_MEGA_BOARD_) || defined(_BOARD_AMBER128_) || defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) || defined(__AVR_ATmega2561__) + #define ENABLE_MONITOR + static void RunMonitor(void); +#endif + +//#define _DEBUG_SERIAL_ +//#define _DEBUG_WITH_LEDS_ + + +/* + * Uncomment the following lines to save code space + */ +//#define REMOVE_PROGRAM_LOCK_BIT_SUPPORT // disable program lock bits +//#define REMOVE_BOOTLOADER_LED // no LED to show active bootloader +//#define REMOVE_CMD_SPI_MULTI // disable processing of SPI_MULTI commands, Remark this line for AVRDUDE <Worapoht> +// + + + +//************************************************************************ +//* LED on pin "PROGLED_PIN" on port "PROGLED_PORT" +//* indicates that bootloader is active +//* PG2 -> LED on Wiring board +//************************************************************************ +#define BLINK_LED_WHILE_WAITING + +#ifdef _MEGA_BOARD_ + #define PROGLED_PORT PORTB + #define PROGLED_DDR DDRB + #define PROGLED_PIN PINB7 +#elif defined( _BOARD_AMBER128_ ) + //* this is for the amber 128 http://www.soc-robotics.com/ + //* onbarod led is PORTE4 + #define PROGLED_PORT PORTD + #define PROGLED_DDR DDRD + #define PROGLED_PIN PINE7 +#elif defined( _CEREBOTPLUS_BOARD_ ) + //* this is for the Cerebot 2560 board + //* onbarod leds are on PORTE4-7 + #define PROGLED_PORT PORTE + #define PROGLED_DDR DDRE + #define PROGLED_PIN PINE7 +#elif defined( _PENGUINO_ ) + //* this is for the Penguino + //* onbarod led is PORTE4 + #define PROGLED_PORT PORTC + #define PROGLED_DDR DDRC + #define PROGLED_PIN PINC6 +#elif defined( _ANDROID_2561_ ) || defined( __AVR_ATmega2561__ ) + //* this is for the Boston Android 2561 + //* onbarod led is PORTE4 + #define PROGLED_PORT PORTA + #define PROGLED_DDR DDRA + #define PROGLED_PIN PINA3 +#else + #define PROGLED_PORT PORTG + #define PROGLED_DDR DDRG + #define PROGLED_PIN PING2 +#endif + + + +/* + * define CPU frequency in Mhz here if not defined in Makefile + */ +#ifndef F_CPU + #define F_CPU 16000000UL +#endif + +/* + * UART Baudrate, AVRStudio AVRISP only accepts 115200 bps + */ + +#ifndef BAUDRATE + #define BAUDRATE 115200 +#endif + +/* + * Enable (1) or disable (0) USART double speed operation + */ +#ifndef UART_BAUDRATE_DOUBLE_SPEED + #if defined (__AVR_ATmega32__) + #define UART_BAUDRATE_DOUBLE_SPEED 0 + #else + #define UART_BAUDRATE_DOUBLE_SPEED 1 + #endif +#endif + +/* + * HW and SW version, reported to AVRISP, must match version of AVRStudio + */ +#define CONFIG_PARAM_BUILD_NUMBER_LOW 0 +#define CONFIG_PARAM_BUILD_NUMBER_HIGH 0 +#define CONFIG_PARAM_HW_VER 0x0F +#define CONFIG_PARAM_SW_MAJOR 2 +#define CONFIG_PARAM_SW_MINOR 0x0A + +/* + * Calculate the address where the bootloader starts from FLASHEND and BOOTSIZE + * (adjust BOOTSIZE below and BOOTLOADER_ADDRESS in Makefile if you want to change the size of the bootloader) + */ +//#define BOOTSIZE 1024 +#if FLASHEND > 0x0F000 + #define BOOTSIZE 8192 +#else + #define BOOTSIZE 2048 +#endif + +#define APP_END (FLASHEND -(2*BOOTSIZE) + 1) + +/* + * Signature bytes are not available in avr-gcc io_xxx.h + */ +#if defined (__AVR_ATmega8__) + #define SIGNATURE_BYTES 0x1E9307 +#elif defined (__AVR_ATmega16__) + #define SIGNATURE_BYTES 0x1E9403 +#elif defined (__AVR_ATmega32__) + #define SIGNATURE_BYTES 0x1E9502 +#elif defined (__AVR_ATmega8515__) + #define SIGNATURE_BYTES 0x1E9306 +#elif defined (__AVR_ATmega8535__) + #define SIGNATURE_BYTES 0x1E9308 +#elif defined (__AVR_ATmega162__) + #define SIGNATURE_BYTES 0x1E9404 +#elif defined (__AVR_ATmega128__) + #define SIGNATURE_BYTES 0x1E9702 +#elif defined (__AVR_ATmega1280__) + #define SIGNATURE_BYTES 0x1E9703 +#elif defined (__AVR_ATmega2560__) + #define SIGNATURE_BYTES 0x1E9801 +#elif defined (__AVR_ATmega2561__) + #define SIGNATURE_BYTES 0x1e9802 +#else + #error "no signature definition for MCU available" +#endif + + +#if defined(__AVR_ATmega8__) || defined(__AVR_ATmega16__) || defined(__AVR_ATmega32__) \ + || defined(__AVR_ATmega8515__) || defined(__AVR_ATmega8535__) + /* ATMega8 with one USART */ + #define UART_BAUD_RATE_LOW UBRRL + #define UART_STATUS_REG UCSRA + #define UART_CONTROL_REG UCSRB + #define UART_ENABLE_TRANSMITTER TXEN + #define UART_ENABLE_RECEIVER RXEN + #define UART_TRANSMIT_COMPLETE TXC + #define UART_RECEIVE_COMPLETE RXC + #define UART_DATA_REG UDR + #define UART_DOUBLE_SPEED U2X + +#elif defined(__AVR_ATmega64__) || defined(__AVR_ATmega128__) || defined(__AVR_ATmega162__) \ + || defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) || defined(__AVR_ATmega2561__) + /* ATMega with two USART, use UART0 */ + #define UART_BAUD_RATE_LOW UBRR0L + #define UART_STATUS_REG UCSR0A + #define UART_CONTROL_REG UCSR0B + #define UART_ENABLE_TRANSMITTER TXEN0 + #define UART_ENABLE_RECEIVER RXEN0 + #define UART_TRANSMIT_COMPLETE TXC0 + #define UART_RECEIVE_COMPLETE RXC0 + #define UART_DATA_REG UDR0 + #define UART_DOUBLE_SPEED U2X0 +#else + #error "no UART definition for MCU available" +#endif + + + +/* + * Macro to calculate UBBR from XTAL and baudrate + */ +#if defined(__AVR_ATmega32__) && UART_BAUDRATE_DOUBLE_SPEED + #define UART_BAUD_SELECT(baudRate,xtalCpu) ((xtalCpu / 4 / baudRate - 1) / 2) +#elif defined(__AVR_ATmega32__) + #define UART_BAUD_SELECT(baudRate,xtalCpu) ((xtalCpu / 8 / baudRate - 1) / 2) +#elif UART_BAUDRATE_DOUBLE_SPEED + #define UART_BAUD_SELECT(baudRate,xtalCpu) (((float)(xtalCpu))/(((float)(baudRate))*8.0)-1.0+0.5) +#else + #define UART_BAUD_SELECT(baudRate,xtalCpu) (((float)(xtalCpu))/(((float)(baudRate))*16.0)-1.0+0.5) +#endif + + +/* + * States used in the receive state machine + */ +#define ST_START 0 +#define ST_GET_SEQ_NUM 1 +#define ST_MSG_SIZE_1 2 +#define ST_MSG_SIZE_2 3 +#define ST_GET_TOKEN 4 +#define ST_GET_DATA 5 +#define ST_GET_CHECK 6 +#define ST_PROCESS 7 + +/* + * use 16bit address variable for ATmegas with <= 64K flash + */ +#if defined(RAMPZ) + typedef uint32_t address_t; +#else + typedef uint16_t address_t; +#endif + +/* + * function prototypes + */ +static void sendchar(char c); +static unsigned char recchar(void); + +/* + * since this bootloader is not linked against the avr-gcc crt1 functions, + * to reduce the code size, we need to provide our own initialization + */ +void __jumpMain (void) __attribute__ ((naked)) __attribute__ ((section (".init9"))); +#include <avr/sfr_defs.h> + +//#define SPH_REG 0x3E +//#define SPL_REG 0x3D + +//***************************************************************************** +void __jumpMain(void) +{ +//* July 17, 2010 <MLS> Added stack pointer initialzation +//* the first line did not do the job on the ATmega128 + + asm volatile ( ".set __stack, %0" :: "i" (RAMEND) ); + +// ldi r16,high(RAMEND) +// out SPH,r16 ; Set stack pointer to top of RAM + +// asm volatile ( "ldi 16, 0x10"); + asm volatile ( "ldi 16, %0" :: "i" (RAMEND >> 8) ); +// asm volatile ( "out 0x3E,16"); +// asm volatile ( "out %0,16" :: "i" (SPH_REG) ); + asm volatile ( "out %0,16" :: "i" (AVR_STACK_POINTER_HI_ADDR) ); + +// asm volatile ( "ldi 16, 0x00"); + asm volatile ( "ldi 16, %0" :: "i" (RAMEND & 0x0ff) ); +// asm volatile ( "out 0x3d,16"); +// asm volatile ( "out %0,16" :: "i" (SPL_REG) ); + asm volatile ( "out %0,16" :: "i" (AVR_STACK_POINTER_LO_ADDR) ); + + + + asm volatile ( "clr __zero_reg__" ); // GCC depends on register r1 set to 0 + asm volatile ( "out %0, __zero_reg__" :: "I" (_SFR_IO_ADDR(SREG)) ); // set SREG to 0 +// asm volatile ( "rjmp main"); // jump to main() + asm volatile ( "jmp main"); // jump to main() +} + + +//***************************************************************************** +void delay_ms(unsigned int timedelay) +{ + unsigned int i; + for (i=0;i<timedelay;i++) + { + _delay_ms(0.5); + } +} + + +//***************************************************************************** +/* + * send single byte to USART, wait until transmission is completed + */ +static void sendchar(char c) +{ + UART_DATA_REG = c; // prepare transmission + while (!(UART_STATUS_REG & (1 << UART_TRANSMIT_COMPLETE))); // wait until byte sent + UART_STATUS_REG |= (1 << UART_TRANSMIT_COMPLETE); // delete TXCflag +} + + +//************************************************************************ +static int Serial_Available(void) +{ + return(UART_STATUS_REG & (1 << UART_RECEIVE_COMPLETE)); // wait for data +} + + +//***************************************************************************** +/* + * Read single byte from USART, block if no data available + */ +static unsigned char recchar(void) +{ + while (!(UART_STATUS_REG & (1 << UART_RECEIVE_COMPLETE))) + { + // wait for data + } + return UART_DATA_REG; +} + +#define MAX_TIME_COUNT (F_CPU >> 1) +//***************************************************************************** +static unsigned char recchar_timeout(void) +{ +uint32_t count = 0; + + while (!(UART_STATUS_REG & (1 << UART_RECEIVE_COMPLETE))) + { + // wait for data + count++; + if (count > MAX_TIME_COUNT) + { + unsigned int data; + #if (FLASHEND > 0x0FFFF) + data = pgm_read_word_far(0); //* get the first word of the user program + #else + data = pgm_read_word_near(0); //* get the first word of the user program + #endif + if (data != 0xffff) //* make sure its valid before jumping to it. + { + asm volatile( + "clr r30 \n\t" + "clr r31 \n\t" + "ijmp \n\t" + ); + } + count = 0; + } + } + return UART_DATA_REG; +} + + + +//***************************************************************************** +int main(void) +{ + address_t address = 0; + address_t eraseAddress = 0; + unsigned char msgParseState; + unsigned int ii = 0; + unsigned char checksum = 0; + unsigned char seqNum = 0; + unsigned int msgLength = 0; + unsigned char msgBuffer[285]; + unsigned char c, *p; + unsigned char isLeave = 0; + + unsigned long boot_timeout; + unsigned long boot_timer; + unsigned int boot_state; +#ifdef ENABLE_MONITOR + unsigned int exPointCntr = 0; +#endif + + + boot_timer = 0; + boot_state = 0; + +#ifdef BLINK_LED_WHILE_WAITING + boot_timeout = 20000; //* should be about 1 second +// boot_timeout = 170000; +#else + boot_timeout = 3500000; // 7 seconds , approx 2us per step when optimize "s" +#endif + /* + * Branch to bootloader or application code ? + */ + +#ifndef REMOVE_BOOTLOADER_LED + /* PROG_PIN pulled low, indicate with LED that bootloader is active */ + PROGLED_DDR |= (1<<PROGLED_PIN); +// PROGLED_PORT &= ~(1<<PROGLED_PIN); // active low LED ON + PROGLED_PORT |= (1<<PROGLED_PIN); // active high LED ON + +#ifdef _DEBUG_WITH_LEDS_ + for (ii=0; ii<3; ii++) + { + PROGLED_PORT &= ~(1<<PROGLED_PIN); // turn LED off + delay_ms(100); + PROGLED_PORT |= (1<<PROGLED_PIN); // turn LED on + delay_ms(100); + } +#endif + +#endif + /* + * Init UART + * set baudrate and enable USART receiver and transmiter without interrupts + */ +#if UART_BAUDRATE_DOUBLE_SPEED + UART_STATUS_REG |= (1 <<UART_DOUBLE_SPEED); +#endif + UART_BAUD_RATE_LOW = UART_BAUD_SELECT(BAUDRATE,F_CPU); + UART_CONTROL_REG = (1 << UART_ENABLE_RECEIVER) | (1 << UART_ENABLE_TRANSMITTER); + + asm volatile ("nop"); // wait until port has changed + +#ifdef _DEBUG_SERIAL_ +// delay_ms(500); + + sendchar('s'); + sendchar('t'); + sendchar('k'); +// sendchar('5'); +// sendchar('0'); +// sendchar('0'); + sendchar('v'); + sendchar('2'); + sendchar(0x0d); + sendchar(0x0a); + + delay_ms(100); +#endif + + while (boot_state==0) + { + while ((!(Serial_Available())) && (boot_state == 0)) // wait for data + { + _delay_ms(0.001); + boot_timer++; + if (boot_timer > boot_timeout) + { + boot_state = 1; // (after ++ -> boot_state=2 bootloader timeout, jump to main 0x00000 ) + } + #ifdef BLINK_LED_WHILE_WAITING + if ((boot_timer % 7000) == 0) + { + //* toggle the LED + PROGLED_PORT ^= (1<<PROGLED_PIN); // turn LED ON + } + #endif + } + boot_state++; // ( if boot_state=1 bootloader received byte from UART, enter bootloader mode) + } + + + if (boot_state==1) + { + //* main loop + while (!isLeave) + { + /* + * Collect received bytes to a complete message + */ + msgParseState = ST_START; + while ( msgParseState != ST_PROCESS ) + { + if (boot_state==1) + { + boot_state = 0; + c = UART_DATA_REG; + } + else + { + // c = recchar(); + c = recchar_timeout(); + } + + #ifdef ENABLE_MONITOR + if (c == '!') + { + exPointCntr++; + if (exPointCntr == 3) + { + RunMonitor(); + exPointCntr = 0; // reset back to zero so we dont get in an endless loop + isLeave = 1; + msgParseState = 99; //* we dont want it do anything + break; + } + } + else + { + exPointCntr = 0; + } + #endif + + switch (msgParseState) + { + case ST_START: + if ( c == MESSAGE_START ) + { + msgParseState = ST_GET_SEQ_NUM; + checksum = MESSAGE_START^0; + } + break; + + case ST_GET_SEQ_NUM: + if ( (c == 1) || (c == seqNum) ) + { + seqNum = c; + msgParseState = ST_MSG_SIZE_1; + checksum ^= c; + } + else + { + msgParseState = ST_START; + } + break; + + case ST_MSG_SIZE_1: + msgLength = c<<8; + msgParseState = ST_MSG_SIZE_2; + checksum ^= c; + break; + + case ST_MSG_SIZE_2: + msgLength |= c; + msgParseState = ST_GET_TOKEN; + checksum ^= c; + break; + + case ST_GET_TOKEN: + if ( c == TOKEN ) + { + msgParseState = ST_GET_DATA; + checksum ^= c; + ii = 0; + } + else + { + msgParseState = ST_START; + } + break; + + case ST_GET_DATA: + msgBuffer[ii++] = c; + checksum ^= c; + if (ii == msgLength ) + { + msgParseState = ST_GET_CHECK; + } + break; + + case ST_GET_CHECK: + if ( c == checksum ) + { + msgParseState = ST_PROCESS; + } + else + { + msgParseState = ST_START; + } + break; + } // switch + } // while(msgParseState) + + /* + * Now process the STK500 commands, see Atmel Appnote AVR068 + */ + + switch (msgBuffer[0]) + { + #ifndef REMOVE_CMD_SPI_MULTI + case CMD_SPI_MULTI: + { + unsigned char answerByte; + unsigned char flag=0; + + if ( msgBuffer[4]== 0x30 ) + { + unsigned char signatureIndex = msgBuffer[6]; + + if ( signatureIndex == 0 ) + answerByte = (SIGNATURE_BYTES >>16) & 0x000000FF; + else if ( signatureIndex == 1 ) + answerByte = (SIGNATURE_BYTES >> 8) & 0x000000FF; + else + answerByte = SIGNATURE_BYTES & 0x000000FF; + } + else if ( msgBuffer[4] & 0x50 ) + { + answerByte = 0; //read fuse/lock bits not implemented, return dummy value + } + else + { + answerByte = 0; // for all others command are not implemented, return dummy value for AVRDUDE happy <Worapoht> + // flag = 1; // Remark this line for AVRDUDE <Worapoht> + } + if ( !flag ) + { + msgLength = 7; + msgBuffer[1] = STATUS_CMD_OK; + msgBuffer[2] = 0; + msgBuffer[3] = msgBuffer[4]; + msgBuffer[4] = 0; + msgBuffer[5] = answerByte; + msgBuffer[6] = STATUS_CMD_OK; + } + } + break; + #endif + case CMD_SIGN_ON: + msgLength = 11; + msgBuffer[1] = STATUS_CMD_OK; + msgBuffer[2] = 8; + msgBuffer[3] = 'A'; + msgBuffer[4] = 'V'; + msgBuffer[5] = 'R'; + msgBuffer[6] = 'I'; + msgBuffer[7] = 'S'; + msgBuffer[8] = 'P'; + msgBuffer[9] = '_'; + msgBuffer[10] = '2'; + break; + + case CMD_GET_PARAMETER: + { + unsigned char value; + + switch(msgBuffer[1]) + { + case PARAM_BUILD_NUMBER_LOW: + value = CONFIG_PARAM_BUILD_NUMBER_LOW; + break; + case PARAM_BUILD_NUMBER_HIGH: + value = CONFIG_PARAM_BUILD_NUMBER_HIGH; + break; + case PARAM_HW_VER: + value = CONFIG_PARAM_HW_VER; + break; + case PARAM_SW_MAJOR: + value = CONFIG_PARAM_SW_MAJOR; + break; + case PARAM_SW_MINOR: + value = CONFIG_PARAM_SW_MINOR; + break; + default: + value = 0; + break; + } + msgLength = 3; + msgBuffer[1] = STATUS_CMD_OK; + msgBuffer[2] = value; + } + break; + + case CMD_LEAVE_PROGMODE_ISP: + isLeave = 1; + //* fall thru + + case CMD_SET_PARAMETER: + case CMD_ENTER_PROGMODE_ISP: + msgLength = 2; + msgBuffer[1] = STATUS_CMD_OK; + break; + + case CMD_READ_SIGNATURE_ISP: + { + unsigned char signatureIndex = msgBuffer[4]; + unsigned char signature; + + if ( signatureIndex == 0 ) + signature = (SIGNATURE_BYTES >>16) & 0x000000FF; + else if ( signatureIndex == 1 ) + signature = (SIGNATURE_BYTES >> 8) & 0x000000FF; + else + signature = SIGNATURE_BYTES & 0x000000FF; + + msgLength = 4; + msgBuffer[1] = STATUS_CMD_OK; + msgBuffer[2] = signature; + msgBuffer[3] = STATUS_CMD_OK; + } + break; + + case CMD_READ_LOCK_ISP: + msgLength = 4; + msgBuffer[1] = STATUS_CMD_OK; + msgBuffer[2] = boot_lock_fuse_bits_get( GET_LOCK_BITS ); + msgBuffer[3] = STATUS_CMD_OK; + break; + + case CMD_READ_FUSE_ISP: + { + unsigned char fuseBits; + + if ( msgBuffer[2] == 0x50 ) + { + if ( msgBuffer[3] == 0x08 ) + fuseBits = boot_lock_fuse_bits_get( GET_EXTENDED_FUSE_BITS ); + else + fuseBits = boot_lock_fuse_bits_get( GET_LOW_FUSE_BITS ); + } + else + { + fuseBits = boot_lock_fuse_bits_get( GET_HIGH_FUSE_BITS ); + } + msgLength = 4; + msgBuffer[1] = STATUS_CMD_OK; + msgBuffer[2] = fuseBits; + msgBuffer[3] = STATUS_CMD_OK; + } + break; + + #ifndef REMOVE_PROGRAM_LOCK_BIT_SUPPORT + case CMD_PROGRAM_LOCK_ISP: + { + unsigned char lockBits = msgBuffer[4]; + + lockBits = (~lockBits) & 0x3C; // mask BLBxx bits + boot_lock_bits_set(lockBits); // and program it + boot_spm_busy_wait(); + + msgLength = 3; + msgBuffer[1] = STATUS_CMD_OK; + msgBuffer[2] = STATUS_CMD_OK; + } + break; + #endif + case CMD_CHIP_ERASE_ISP: + eraseAddress = 0; + msgLength = 2; + msgBuffer[1] = STATUS_CMD_OK; + break; + + case CMD_LOAD_ADDRESS: + #if defined(RAMPZ) + address = ( ((address_t)(msgBuffer[1])<<24)|((address_t)(msgBuffer[2])<<16)|((address_t)(msgBuffer[3])<<8)|(msgBuffer[4]) )<<1; + #else + address = ( ((msgBuffer[3])<<8)|(msgBuffer[4]) )<<1; //convert word to byte address + #endif + msgLength = 2; + msgBuffer[1] = STATUS_CMD_OK; + break; + + case CMD_PROGRAM_FLASH_ISP: + case CMD_PROGRAM_EEPROM_ISP: + { + unsigned int size = ((msgBuffer[1])<<8) | msgBuffer[2]; + unsigned char *p = msgBuffer+10; + unsigned int data; + unsigned char highByte, lowByte; + address_t tempaddress = address; + + + if ( msgBuffer[0] == CMD_PROGRAM_FLASH_ISP ) + { + // erase only main section (bootloader protection) + if (eraseAddress < APP_END ) + { + boot_page_erase(eraseAddress); // Perform page erase + boot_spm_busy_wait(); // Wait until the memory is erased. + eraseAddress += SPM_PAGESIZE; // point to next page to be erase + } + + /* Write FLASH */ + do { + lowByte = *p++; + highByte = *p++; + + data = (highByte << 8) | lowByte; + boot_page_fill(address,data); + + address = address + 2; // Select next word in memory + size -= 2; // Reduce number of bytes to write by two + } while (size); // Loop until all bytes written + + boot_page_write(tempaddress); + boot_spm_busy_wait(); + boot_rww_enable(); // Re-enable the RWW section + } + else + { + #if (!defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__) && !defined(__AVR_ATmega2561__)) + /* write EEPROM */ + do { + EEARL = address; // Setup EEPROM address + EEARH = (address >> 8); + address++; // Select next EEPROM byte + + EEDR = *p++; // get byte from buffer + EECR |= (1<<EEMWE); // Write data into EEPROM + EECR |= (1<<EEWE); + + while (EECR & (1<<EEWE)); // Wait for write operation to finish + size--; // Decrease number of bytes to write + } while (size); // Loop until all bytes written + #endif + } + msgLength = 2; + msgBuffer[1] = STATUS_CMD_OK; + } + break; + + case CMD_READ_FLASH_ISP: + case CMD_READ_EEPROM_ISP: + { + unsigned int size = ((msgBuffer[1])<<8) | msgBuffer[2]; + unsigned char *p = msgBuffer+1; + msgLength = size+3; + + *p++ = STATUS_CMD_OK; + if (msgBuffer[0] == CMD_READ_FLASH_ISP ) + { + unsigned int data; + + // Read FLASH + do { + #if defined(RAMPZ) + data = pgm_read_word_far(address); + #else + data = pgm_read_word_near(address); + #endif + *p++ = (unsigned char)data; //LSB + *p++ = (unsigned char)(data >> 8); //MSB + address += 2; // Select next word in memory + size -= 2; + }while (size); + } + else + { + /* Read EEPROM */ + do { + EEARL = address; // Setup EEPROM address + EEARH = ((address >> 8)); + address++; // Select next EEPROM byte + EECR |= (1<<EERE); // Read EEPROM + *p++ = EEDR; // Send EEPROM data + size--; + } while (size); + } + *p++ = STATUS_CMD_OK; + } + break; + + default: + msgLength = 2; + msgBuffer[1] = STATUS_CMD_FAILED; + break; + } + + /* + * Now send answer message back + */ + sendchar(MESSAGE_START); + checksum = MESSAGE_START^0; + + sendchar(seqNum); + checksum ^= seqNum; + + c = ((msgLength>>8)&0xFF); + sendchar(c); + checksum ^= c; + + c = msgLength&0x00FF; + sendchar(c); + checksum ^= c; + + sendchar(TOKEN); + checksum ^= TOKEN; + + p = msgBuffer; + while ( msgLength ) + { + c = *p++; + sendchar(c); + checksum ^=c; + msgLength--; + } + sendchar(checksum); + seqNum++; + + #ifndef REMOVE_BOOTLOADER_LED + //* <MLS> toggle the LED + PROGLED_PORT ^= (1<<PROGLED_PIN); // active high LED ON + #endif + + } + } + +#ifdef _DEBUG_WITH_LEDS_ + //* this is for debugging it can be removed + for (ii=0; ii<10; ii++) + { + PROGLED_PORT &= ~(1<<PROGLED_PIN); // turn LED off + delay_ms(200); + PROGLED_PORT |= (1<<PROGLED_PIN); // turn LED on + delay_ms(200); + } + PROGLED_PORT &= ~(1<<PROGLED_PIN); // turn LED off +#endif + +#ifdef _DEBUG_SERIAL_ + sendchar('j'); +// sendchar('u'); +// sendchar('m'); +// sendchar('p'); +// sendchar(' '); +// sendchar('u'); +// sendchar('s'); +// sendchar('r'); + sendchar(0x0d); + sendchar(0x0a); + + delay_ms(100); +#endif + + +#ifndef REMOVE_BOOTLOADER_LED + PROGLED_DDR &= ~(1<<PROGLED_PIN); // set to default + PROGLED_PORT &= ~(1<<PROGLED_PIN); // active low LED OFF +// PROGLED_PORT |= (1<<PROGLED_PIN); // active high LED OFf + delay_ms(100); // delay after exit +#endif + + + asm volatile ("nop"); // wait until port has changed + + /* + * Now leave bootloader + */ + + UART_STATUS_REG &= 0xfd; + boot_rww_enable(); // enable application section + + + asm volatile( + "clr r30 \n\t" + "clr r31 \n\t" + "ijmp \n\t" + ); +// asm volatile ( "push r1" "\n\t" // Jump to Reset vector in Application Section +// "push r1" "\n\t" +// "ret" "\n\t" +// ::); + + /* + * Never return to stop GCC to generate exit return code + * Actually we will never reach this point, but the compiler doesn't + * understand this + */ + for(;;); +} + +/* +base address = f800 + +avrdude: Device signature = 0x1e9703 +avrdude: safemode: lfuse reads as FF +avrdude: safemode: hfuse reads as DA +avrdude: safemode: efuse reads as F5 +avrdude> + + +base address = f000 +avrdude: Device signature = 0x1e9703 +avrdude: safemode: lfuse reads as FF +avrdude: safemode: hfuse reads as D8 +avrdude: safemode: efuse reads as F5 +avrdude> +*/ + +//************************************************************************ +#ifdef ENABLE_MONITOR +#include <math.h> + +unsigned long gRamIndex; +unsigned long gFlashIndex; +unsigned long gEepromIndex; + + +#define true 1 +#define false 0 + +#if defined(__AVR_ATmega128__) + #define kCPU_NAME "ATmega128" +#elif defined(__AVR_ATmega1280__) + #define kCPU_NAME "ATmega1280" +#elif defined(__AVR_ATmega1281__) + #define kCPU_NAME "ATmega1281" +#elif defined(__AVR_ATmega2560__) + #define kCPU_NAME "ATmega2560" +#elif defined(__AVR_ATmega2561__) + #define kCPU_NAME "ATmega2561" +#endif + +#ifdef _VECTORS_SIZE + #define kInterruptVectorCount (_VECTORS_SIZE / 4) +#else + #define kInterruptVectorCount 23 +#endif + + +void PrintDecInt(int theNumber, int digitCnt); + +#ifdef kCPU_NAME + prog_char gTextMsg_CPU_Name[] PROGMEM = kCPU_NAME; +#else + prog_char gTextMsg_CPU_Name[] PROGMEM = "UNKNOWN"; +#endif + + prog_char gTextMsg_Explorer[] PROGMEM = "Arduino explorer stk500V2 by MLS"; + prog_char gTextMsg_Prompt[] PROGMEM = "Bootloader>"; + prog_char gTextMsg_HUH[] PROGMEM = "Huh?"; + prog_char gTextMsg_COMPILED_ON[] PROGMEM = "Compiled on = "; + prog_char gTextMsg_CPU_Type[] PROGMEM = "CPU Type = "; + prog_char gTextMsg_AVR_ARCH[] PROGMEM = "__AVR_ARCH__ = "; + prog_char gTextMsg_AVR_LIBC[] PROGMEM = "AVR LibC Ver = "; + prog_char gTextMsg_GCC_VERSION[] PROGMEM = "GCC Version = "; + prog_char gTextMsg_CPU_SIGNATURE[] PROGMEM = "CPU signature= "; + prog_char gTextMsg_FUSE_BYTE_LOW[] PROGMEM = "Low fuse = "; + prog_char gTextMsg_FUSE_BYTE_HIGH[] PROGMEM = "High fuse = "; + prog_char gTextMsg_FUSE_BYTE_EXT[] PROGMEM = "Ext fuse = "; + prog_char gTextMsg_FUSE_BYTE_LOCK[] PROGMEM = "Lock fuse = "; + prog_char gTextMsg_GCC_DATE_STR[] PROGMEM = __DATE__; + prog_char gTextMsg_AVR_LIBC_VER_STR[] PROGMEM = __AVR_LIBC_VERSION_STRING__; + prog_char gTextMsg_GCC_VERSION_STR[] PROGMEM = __VERSION__; + prog_char gTextMsg_VECTOR_HEADER[] PROGMEM = "V# ADDR op code instruction addr Interrupt"; + prog_char gTextMsg_noVector[] PROGMEM = "no vector"; + prog_char gTextMsg_rjmp[] PROGMEM = "rjmp "; + prog_char gTextMsg_jmp[] PROGMEM = "jmp "; + prog_char gTextMsg_WHAT_PORT[] PROGMEM = "What port:"; + prog_char gTextMsg_PortNotSupported[] PROGMEM = "Port not supported"; + prog_char gTextMsg_MustBeLetter[] PROGMEM = "Must be a letter"; + prog_char gTextMsg_SPACE[] PROGMEM = " "; + prog_char gTextMsg_WriteToEEprom[] PROGMEM = "Writting EE"; + prog_char gTextMsg_ReadingEEprom[] PROGMEM = "Reading EE"; + prog_char gTextMsg_EEPROMerrorCnt[] PROGMEM = "eeprom error count="; + prog_char gTextMsg_PORT[] PROGMEM = "PORT"; + + +//************************************************************************ +//* Help messages + prog_char gTextMsg_HELP_MSG_0[] PROGMEM = "0=Zero address ctrs"; + prog_char gTextMsg_HELP_MSG_QM[] PROGMEM = "?=CPU stats"; + prog_char gTextMsg_HELP_MSG_AT[] PROGMEM = "@=EEPROM test"; + prog_char gTextMsg_HELP_MSG_B[] PROGMEM = "B=Blink LED"; + prog_char gTextMsg_HELP_MSG_E[] PROGMEM = "E=Dump EEPROM"; + prog_char gTextMsg_HELP_MSG_F[] PROGMEM = "F=Dump FLASH"; + prog_char gTextMsg_HELP_MSG_H[] PROGMEM = "H=Help"; + prog_char gTextMsg_HELP_MSG_L[] PROGMEM = "L=List I/O Ports"; + prog_char gTextMsg_HELP_MSG_Q[] PROGMEM = "Q=Quit & jump to user pgm"; + prog_char gTextMsg_HELP_MSG_R[] PROGMEM = "R=Dump RAM"; + prog_char gTextMsg_HELP_MSG_V[] PROGMEM = "V=show interrupt Vectors"; + prog_char gTextMsg_HELP_MSG_Y[] PROGMEM = "Y=Port blink"; + + prog_char gTextMsg_END[] PROGMEM = "*"; + + +//************************************************************************ +void PrintFromPROGMEM(void *dataPtr, unsigned char offset) +{ +uint8_t ii; +char theChar; + + ii = offset; + theChar = 1; + + while (theChar != 0) + { + theChar = pgm_read_byte_far((uint32_t)dataPtr + ii); + if (theChar != 0) + { + sendchar(theChar); + } + ii++; + } +} + +//************************************************************************ +void PrintNewLine(void) +{ + sendchar(0x0d); + sendchar(0x0a); +} + + +//************************************************************************ +void PrintFromPROGMEMln(void *dataPtr, unsigned char offset) +{ + PrintFromPROGMEM(dataPtr, offset); + + PrintNewLine(); +} + + +//************************************************************************ +void PrintString(char *textString) +{ +char theChar; +int ii; + + theChar = 1; + ii = 0; + while (theChar != 0) + { + theChar = textString[ii]; + if (theChar != 0) + { + sendchar(theChar); + } + ii++; + } +} + +//************************************************************************ +void PrintHexByte(unsigned char theByte) +{ +char theChar; + + theChar = 0x30 + ((theByte >> 4) & 0x0f); + if (theChar > 0x39) + { + theChar += 7; + } + sendchar(theChar ); + + theChar = 0x30 + (theByte & 0x0f); + if (theChar > 0x39) + { + theChar += 7; + } + sendchar(theChar ); +} + +//************************************************************************ +void PrintDecInt(int theNumber, int digitCnt) +{ +int theChar; +int myNumber; + + myNumber = theNumber; + + if ((myNumber > 100) || (digitCnt >= 3)) + { + theChar = 0x30 + myNumber / 100; + sendchar(theChar ); + } + + if ((myNumber > 10) || (digitCnt >= 2)) + { + theChar = 0x30 + ((myNumber % 100) / 10 ); + sendchar(theChar ); + } + theChar = 0x30 + (myNumber % 10); + sendchar(theChar ); +} + + + + +//************************************************************************ +static void PrintCPUstats(void) +{ +unsigned char fuseByte; + + PrintFromPROGMEMln(gTextMsg_Explorer, 0); + + PrintFromPROGMEM(gTextMsg_COMPILED_ON, 0); + PrintFromPROGMEMln(gTextMsg_GCC_DATE_STR, 0); + + PrintFromPROGMEM(gTextMsg_CPU_Type, 0); + PrintFromPROGMEMln(gTextMsg_CPU_Name, 0); + + PrintFromPROGMEM(gTextMsg_AVR_ARCH, 0); + PrintDecInt(__AVR_ARCH__, 1); + PrintNewLine(); + + PrintFromPROGMEM(gTextMsg_GCC_VERSION, 0); + PrintFromPROGMEMln(gTextMsg_GCC_VERSION_STR, 0); + + //* these can be found in avr/version.h + PrintFromPROGMEM(gTextMsg_AVR_LIBC, 0); + PrintFromPROGMEMln(gTextMsg_AVR_LIBC_VER_STR, 0); + +#if defined(SIGNATURE_0) + PrintFromPROGMEM(gTextMsg_CPU_SIGNATURE, 0); + //* these can be found in avr/iomxxx.h + PrintHexByte(SIGNATURE_0); + PrintHexByte(SIGNATURE_1); + PrintHexByte(SIGNATURE_2); + PrintNewLine(); +#endif + + +#if defined(GET_LOW_FUSE_BITS) + //* fuse settings + PrintFromPROGMEM(gTextMsg_FUSE_BYTE_LOW, 0); + fuseByte = boot_lock_fuse_bits_get(GET_LOW_FUSE_BITS); + PrintHexByte(fuseByte); + PrintNewLine(); + + PrintFromPROGMEM(gTextMsg_FUSE_BYTE_HIGH, 0); + fuseByte = boot_lock_fuse_bits_get(GET_HIGH_FUSE_BITS); + PrintHexByte(fuseByte); + PrintNewLine(); + + PrintFromPROGMEM(gTextMsg_FUSE_BYTE_EXT, 0); + fuseByte = boot_lock_fuse_bits_get(GET_EXTENDED_FUSE_BITS); + PrintHexByte(fuseByte); + PrintNewLine(); + + PrintFromPROGMEM(gTextMsg_FUSE_BYTE_LOCK, 0); + fuseByte = boot_lock_fuse_bits_get(GET_LOCK_BITS); + PrintHexByte(fuseByte); + PrintNewLine(); + +#endif + +} + +#ifndef sbi + #define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit)) +#endif + +//************************************************************************ +int analogRead(uint8_t pin) +{ +uint8_t low, high; + + // set the analog reference (high two bits of ADMUX) and select the + // channel (low 4 bits). this also sets ADLAR (left-adjust result) + // to 0 (the default). +// ADMUX = (analog_reference << 6) | (pin & 0x07); + ADMUX = (1 << 6) | (pin & 0x07); + +#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) + // the MUX5 bit of ADCSRB selects whether we're reading from channels + // 0 to 7 (MUX5 low) or 8 to 15 (MUX5 high). + ADCSRB = (ADCSRB & ~(1 << MUX5)) | (((pin >> 3) & 0x01) << MUX5); +#endif + + // without a delay, we seem to read from the wrong channel + //delay(1); + + // start the conversion + sbi(ADCSRA, ADSC); + + // ADSC is cleared when the conversion finishes + while (bit_is_set(ADCSRA, ADSC)); + + // we have to read ADCL first; doing so locks both ADCL + // and ADCH until ADCH is read. reading ADCL second would + // cause the results of each conversion to be discarded, + // as ADCL and ADCH would be locked when it completed. + low = ADCL; + high = ADCH; + + // combine the two bytes + return (high << 8) | low; +} + +//************************************************************************ +static void BlinkLED(void) +{ + PROGLED_DDR |= (1<<PROGLED_PIN); + PROGLED_PORT |= (1<<PROGLED_PIN); // active high LED ON + + while (!Serial_Available()) + { + PROGLED_PORT &= ~(1<<PROGLED_PIN); // turn LED off + delay_ms(100); + PROGLED_PORT |= (1<<PROGLED_PIN); // turn LED on + delay_ms(100); + } + recchar(); // get the char out of the buffer +} + +enum +{ + kDUMP_FLASH = 0, + kDUMP_EEPROM, + kDUMP_RAM +}; + +//************************************************************************ +static void DumpHex(unsigned char dumpWhat, unsigned long startAddress, unsigned char numRows) +{ +unsigned long myAddressPointer; +uint8_t ii; +unsigned char theValue; +char asciiDump[18]; +unsigned char *ramPtr; + + + ramPtr = 0; + theValue = 0; + myAddressPointer = startAddress; + while (numRows > 0) + { + if (myAddressPointer > 0x10000) + { + PrintHexByte((myAddressPointer >> 16) & 0x00ff); + } + PrintHexByte((myAddressPointer >> 8) & 0x00ff); + PrintHexByte(myAddressPointer & 0x00ff); + sendchar(0x20); + sendchar('-'); + sendchar(0x20); + + asciiDump[0] = 0; + for (ii=0; ii<16; ii++) + { + switch(dumpWhat) + { + case kDUMP_FLASH: + theValue = pgm_read_byte_far(myAddressPointer); + break; + + case kDUMP_EEPROM: + theValue = eeprom_read_byte((void *)myAddressPointer); + break; + + case kDUMP_RAM: + theValue = ramPtr[myAddressPointer]; + break; + + } + PrintHexByte(theValue); + sendchar(0x20); + if ((theValue >= 0x20) && (theValue < 0x7f)) + { + asciiDump[ii % 16] = theValue; + } + else + { + asciiDump[ii % 16] = '.'; + } + + myAddressPointer++; + } + asciiDump[16] = 0; + PrintString(asciiDump); + PrintNewLine(); + + numRows--; + } +} + + + +//************************************************************************ +//* returns amount of extended memory +static void EEPROMtest(void) +{ +int ii; +char theChar; +char theEEPROMchar; +int errorCount; + + PrintFromPROGMEMln(gTextMsg_WriteToEEprom, 0); + PrintNewLine(); + ii = 0; + while (((theChar = pgm_read_byte_far(gTextMsg_Explorer + ii)) != '*') && (ii < 512)) + { + eeprom_write_byte((uint8_t *)ii, theChar); + if (theChar == 0) + { + PrintFromPROGMEM(gTextMsg_SPACE, 0); + } + else + { + sendchar(theChar); + } + ii++; + } + + //* no go back through and test + PrintNewLine(); + PrintNewLine(); + PrintFromPROGMEMln(gTextMsg_ReadingEEprom, 0); + PrintNewLine(); + errorCount = 0; + ii = 0; + while (((theChar = pgm_read_byte_far(gTextMsg_Explorer + ii)) != '*') && (ii < 512)) + { + theEEPROMchar = eeprom_read_byte((uint8_t *)ii); + if (theEEPROMchar == 0) + { + PrintFromPROGMEM(gTextMsg_SPACE, 0); + } + else + { + sendchar(theEEPROMchar); + } + if (theEEPROMchar != theChar) + { + errorCount++; + } + ii++; + } + PrintNewLine(); + PrintNewLine(); + PrintFromPROGMEM(gTextMsg_EEPROMerrorCnt, 0); + PrintDecInt(errorCount, 1); + PrintNewLine(); + PrintNewLine(); + + gEepromIndex = 0; //* set index back to zero for next eeprom dump + +} + + + +#if (FLASHEND > 0x08000) + #include "avrinterruptnames.h" + #ifndef _INTERRUPT_NAMES_DEFINED_ + #warning Interrupt vectors not defined + #endif +#endif + +//************************************************************************ +static void VectorDisplay(void) +{ +unsigned long byte1; +unsigned long byte2; +unsigned long byte3; +unsigned long byte4; +unsigned long word1; +unsigned long word2; +int vectorIndex; +unsigned long myMemoryPtr; +unsigned long wordMemoryAddress; +unsigned long realitiveAddr; +unsigned long myFullAddress; +unsigned long absoluteAddr; +#if defined(_INTERRUPT_NAMES_DEFINED_) + long stringPointer; +#endif + + myMemoryPtr = 0; + vectorIndex = 0; + PrintFromPROGMEMln(gTextMsg_CPU_Name, 0); + PrintFromPROGMEMln(gTextMsg_VECTOR_HEADER, 0); + // V# ADDR op code + // 1 - 0000 = C3 BB 00 00 rjmp 03BB >000776 RESET + while (vectorIndex < kInterruptVectorCount) + { + wordMemoryAddress = myMemoryPtr / 2; + // 01 - 0000 = 12 34 + PrintDecInt(vectorIndex + 1, 2); + sendchar(0x20); + sendchar('-'); + sendchar(0x20); + PrintHexByte((wordMemoryAddress >> 8) & 0x00ff); + PrintHexByte((wordMemoryAddress) & 0x00ff); + sendchar(0x20); + sendchar('='); + sendchar(0x20); + + + //* the AVR is LITTLE ENDIAN, swap the byte order + byte1 = pgm_read_byte_far(myMemoryPtr++); + byte2 = pgm_read_byte_far(myMemoryPtr++); + word1 = (byte2 << 8) + byte1; + + byte3 = pgm_read_byte_far(myMemoryPtr++); + byte4 = pgm_read_byte_far(myMemoryPtr++); + word2 = (byte4 << 8) + byte3; + + + PrintHexByte(byte2); + sendchar(0x20); + PrintHexByte(byte1); + sendchar(0x20); + PrintHexByte(byte4); + sendchar(0x20); + PrintHexByte(byte3); + sendchar(0x20); + + if (word1 == 0xffff) + { + PrintFromPROGMEM(gTextMsg_noVector, 0); + } + else if ((word1 & 0xc000) == 0xc000) + { + //* rjmp instruction + realitiveAddr = word1 & 0x3FFF; + absoluteAddr = wordMemoryAddress + realitiveAddr; //* add the offset to the current address + absoluteAddr = absoluteAddr << 1; //* multiply by 2 for byte address + + PrintFromPROGMEM(gTextMsg_rjmp, 0); + PrintHexByte((realitiveAddr >> 8) & 0x00ff); + PrintHexByte((realitiveAddr) & 0x00ff); + sendchar(0x20); + sendchar('>'); + PrintHexByte((absoluteAddr >> 16) & 0x00ff); + PrintHexByte((absoluteAddr >> 8) & 0x00ff); + PrintHexByte((absoluteAddr) & 0x00ff); + + } + else if ((word1 & 0xfE0E) == 0x940c) + { + //* jmp instruction, this is REALLY complicated, refer to the instruction manual (JMP) + myFullAddress = ((byte1 & 0x01) << 16) + + ((byte1 & 0xf0) << 17) + + ((byte2 & 0x01) << 21) + + word2; + + absoluteAddr = myFullAddress << 1; + + PrintFromPROGMEM(gTextMsg_jmp, 0); + PrintHexByte((myFullAddress >> 16) & 0x00ff); + PrintHexByte((myFullAddress >> 8) & 0x00ff); + PrintHexByte((myFullAddress) & 0x00ff); + sendchar(0x20); + sendchar('>'); + PrintHexByte((absoluteAddr >> 16) & 0x00ff); + PrintHexByte((absoluteAddr >> 8) & 0x00ff); + PrintHexByte((absoluteAddr) & 0x00ff); + } + + #if defined(_INTERRUPT_NAMES_DEFINED_) + sendchar(0x20); + stringPointer = pgm_read_word_far(&(gInterruptNameTable[vectorIndex])); + PrintFromPROGMEM((char *)stringPointer, 0); + #endif + PrintNewLine(); + + vectorIndex++; + } +} + +//************************************************************************ +static void PrintAvailablePort(char thePortLetter) +{ + PrintFromPROGMEM(gTextMsg_PORT, 0); + sendchar(thePortLetter); + PrintNewLine(); +} + +//************************************************************************ +static void ListAvailablePorts(void) +{ + +#ifdef DDRA + PrintAvailablePort('A'); +#endif + +#ifdef DDRB + PrintAvailablePort('B'); +#endif + +#ifdef DDRC + PrintAvailablePort('C'); +#endif + +#ifdef DDRD + PrintAvailablePort('D'); +#endif + +#ifdef DDRE + PrintAvailablePort('E'); +#endif + +#ifdef DDRF + PrintAvailablePort('F'); +#endif + +#ifdef DDRG + PrintAvailablePort('G'); +#endif + +#ifdef DDRH + PrintAvailablePort('H'); +#endif + +#ifdef DDRI + PrintAvailablePort('I'); +#endif + +#ifdef DDRJ + PrintAvailablePort('J'); +#endif + +#ifdef DDRK + PrintAvailablePort('K'); +#endif + +#ifdef DDRL + PrintAvailablePort('L'); +#endif + +} + +//************************************************************************ +static void AVR_PortOutput(void) +{ +char portLetter; +char getCharFlag; + + PrintFromPROGMEM(gTextMsg_WHAT_PORT, 0); + + portLetter = recchar(); + portLetter = portLetter & 0x5f; + sendchar(portLetter); + PrintNewLine(); + + if ((portLetter >= 'A') && (portLetter <= 'Z')) + { + getCharFlag = true; + switch(portLetter) + { + #ifdef DDRA + case 'A': + DDRA = 0xff; + while (!Serial_Available()) + { + PORTA ^= 0xff; + delay_ms(200); + } + PORTA = 0; + break; + #endif + + #ifdef DDRB + case 'B': + DDRB = 0xff; + while (!Serial_Available()) + { + PORTB ^= 0xff; + delay_ms(200); + } + PORTB = 0; + break; + #endif + + #ifdef DDRC + case 'C': + DDRC = 0xff; + while (!Serial_Available()) + { + PORTC ^= 0xff; + delay_ms(200); + } + PORTC = 0; + break; + #endif + + #ifdef DDRD + case 'D': + DDRD = 0xff; + while (!Serial_Available()) + { + PORTD ^= 0xff; + delay_ms(200); + } + PORTD = 0; + break; + #endif + + #ifdef DDRE + case 'E': + DDRE = 0xff; + while (!Serial_Available()) + { + PORTE ^= 0xff; + delay_ms(200); + } + PORTE = 0; + break; + #endif + + #ifdef DDRF + case 'F': + DDRF = 0xff; + while (!Serial_Available()) + { + PORTF ^= 0xff; + delay_ms(200); + } + PORTF = 0; + break; + #endif + + #ifdef DDRG + case 'G': + DDRG = 0xff; + while (!Serial_Available()) + { + PORTG ^= 0xff; + delay_ms(200); + } + PORTG = 0; + break; + #endif + + #ifdef DDRH + case 'H': + DDRH = 0xff; + while (!Serial_Available()) + { + PORTH ^= 0xff; + delay_ms(200); + } + PORTH = 0; + break; + #endif + + #ifdef DDRI + case 'I': + DDRI = 0xff; + while (!Serial_Available()) + { + PORTI ^= 0xff; + delay_ms(200); + } + PORTI = 0; + break; + #endif + + #ifdef DDRJ + case 'J': + DDRJ = 0xff; + while (!Serial_Available()) + { + PORTJ ^= 0xff; + delay_ms(200); + } + PORTJ = 0; + break; + #endif + + #ifdef DDRK + case 'K': + DDRK = 0xff; + while (!Serial_Available()) + { + PORTK ^= 0xff; + delay_ms(200); + } + PORTK = 0; + break; + #endif + + #ifdef DDRL + case 'L': + DDRL = 0xff; + while (!Serial_Available()) + { + PORTL ^= 0xff; + delay_ms(200); + } + PORTL = 0; + break; + #endif + + default: + PrintFromPROGMEMln(gTextMsg_PortNotSupported, 0); + getCharFlag = false; + break; + } + if (getCharFlag) + { + recchar(); + } + } + else + { + PrintFromPROGMEMln(gTextMsg_MustBeLetter, 0); + } +} + + +//******************************************************************* +static void PrintHelp(void) +{ + PrintFromPROGMEMln(gTextMsg_HELP_MSG_0, 0); + PrintFromPROGMEMln(gTextMsg_HELP_MSG_QM, 0); + PrintFromPROGMEMln(gTextMsg_HELP_MSG_AT, 0); + PrintFromPROGMEMln(gTextMsg_HELP_MSG_B, 0); + PrintFromPROGMEMln(gTextMsg_HELP_MSG_E, 0); + PrintFromPROGMEMln(gTextMsg_HELP_MSG_F, 0); + PrintFromPROGMEMln(gTextMsg_HELP_MSG_H, 0); + + PrintFromPROGMEMln(gTextMsg_HELP_MSG_L, 0); + PrintFromPROGMEMln(gTextMsg_HELP_MSG_Q, 0); + PrintFromPROGMEMln(gTextMsg_HELP_MSG_R, 0); + PrintFromPROGMEMln(gTextMsg_HELP_MSG_V, 0); + PrintFromPROGMEMln(gTextMsg_HELP_MSG_Y, 0); +} + +//************************************************************************ +static void RunMonitor(void) +{ +char keepGoing; +unsigned char theChar; +int ii, jj; + + for (ii=0; ii<5; ii++) + { + for (jj=0; jj<25; jj++) + { + sendchar('!'); + } + PrintNewLine(); + } + + gRamIndex = 0; + gFlashIndex = 0; + gEepromIndex = 0; + + PrintFromPROGMEMln(gTextMsg_Explorer, 0); + + keepGoing = 1; + while (keepGoing) + { + PrintFromPROGMEM(gTextMsg_Prompt, 0); + theChar = recchar(); + if (theChar >= 0x60) + { + theChar = theChar & 0x5F; + } + #if defined( _CEREBOTPLUS_BOARD_ ) + if (theChar == 0x5F) + { + + } + else + #endif + if (theChar >= 0x20) + { + sendchar(theChar); + sendchar(0x20); + } + + switch(theChar) + { + case '0': + PrintFromPROGMEMln(gTextMsg_HELP_MSG_0, 2); + gFlashIndex = 0; + gRamIndex = 0; + gEepromIndex = 0; + break; + + case '?': + PrintFromPROGMEMln(gTextMsg_HELP_MSG_QM, 2); + PrintCPUstats(); + break; + + case '@': + PrintFromPROGMEMln(gTextMsg_HELP_MSG_AT, 2); + EEPROMtest(); + break; + + case 'B': + PrintFromPROGMEMln(gTextMsg_HELP_MSG_B, 2); + BlinkLED(); + break; + + case 'E': + PrintFromPROGMEMln(gTextMsg_HELP_MSG_E, 2); + DumpHex(kDUMP_EEPROM, gEepromIndex, 16); + gEepromIndex += 256; + if (gEepromIndex > E2END) + { + gEepromIndex = 0; + } + break; + + case 'F': + PrintFromPROGMEMln(gTextMsg_HELP_MSG_F, 2); + DumpHex(kDUMP_FLASH, gFlashIndex, 16); + gFlashIndex += 256; + break; + + case 'H': + PrintFromPROGMEMln(gTextMsg_HELP_MSG_H, 2); + PrintHelp(); + break; + + case 'L': + PrintFromPROGMEMln(gTextMsg_HELP_MSG_L, 2); + ListAvailablePorts(); + break; + + case 'Q': + PrintFromPROGMEMln(gTextMsg_HELP_MSG_Q, 2); + keepGoing = false; + break; + + case 'R': + PrintFromPROGMEMln(gTextMsg_HELP_MSG_R, 2); + DumpHex(kDUMP_RAM, gRamIndex, 16); + gRamIndex += 256; + break; + + case 'V': + PrintFromPROGMEMln(gTextMsg_HELP_MSG_V, 2); + VectorDisplay(); + break; + + case 'Y': + PrintFromPROGMEMln(gTextMsg_HELP_MSG_Y, 2); + AVR_PortOutput(); + break; + + #if defined( _CEREBOTPLUS_BOARD_ ) + case 0x5F: + //* do nothing + break; + #endif + + default: + PrintFromPROGMEMln(gTextMsg_HUH, 0); + break; + } + } +} + +#endif + diff --git a/test/ardmake/hardware/bootloaders/stk500v2/stk500boot.ppg b/test/ardmake/hardware/bootloaders/stk500v2/stk500boot.ppg new file mode 100644 index 0000000..a8929d7 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/stk500v2/stk500boot.ppg @@ -0,0 +1 @@ +<Workspace name="Bootloader"><Project path="STK500V2.pnproj"></Project></Workspace>
\ No newline at end of file diff --git a/test/ardmake/hardware/bootloaders/stk500v2/stk500boot_v2_mega2560.hex b/test/ardmake/hardware/bootloaders/stk500v2/stk500boot_v2_mega2560.hex new file mode 100644 index 0000000..4f36699 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/stk500v2/stk500boot_v2_mega2560.hex @@ -0,0 +1,513 @@ +:020000023000CC
+:10E000000D94F6F20D941FF30D941FF30D941FF36E
+:10E010000D941FF30D941FF30D941FF30D941FF334
+:10E020000D941FF30D941FF30D941FF30D941FF324
+:10E030000D941FF30D941FF30D941FF30D941FF314
+:10E040000D941FF30D941FF30D941FF30D941FF304
+:10E050000D941FF30D941FF30D941FF30D941FF3F4
+:10E060000D941FF30D941FF30D941FF30D941FF3E4
+:10E070000D941FF30D941FF30D941FF30D941FF3D4
+:10E080000D941FF30D941FF30D941FF30D941FF3C4
+:10E090000D941FF30D941FF30D941FF30D941FF3B4
+:10E0A0000D941FF30D941FF30D941FF30D941FF3A4
+:10E0B0000D941FF30D941FF30D941FF30D941FF394
+:10E0C0000D941FF30D941FF30D941FF30D941FF384
+:10E0D0000D941FF30D941FF30D941FF30D941FF374
+:10E0E0000D941FF341546D65676132353630004140
+:10E0F000726475696E6F206578706C6F72657220DE
+:10E1000073746B3530305632206279204D4C530099
+:10E11000426F6F746C6F616465723E004875683F52
+:10E1200000436F6D70696C6564206F6E20203D2028
+:10E1300000435055205479706520202020203D2038
+:10E14000005F5F4156525F415243485F5F203D2070
+:10E1500000415652204C69624320566572203D2092
+:10E16000004743432056657273696F6E20203D203F
+:10E1700000435055207369676E61747572653D2068
+:10E18000004C6F77206675736520202020203D208D
+:10E1900000486967682066757365202020203D204F
+:10E1A00000457874206675736520202020203D206E
+:10E1B000004C6F636B2066757365202020203D2026
+:10E1C00000536570202039203230313000312E3636
+:10E1D0002E3700342E332E33005623202020414486
+:10E1E00044522020206F7020636F6465202020201F
+:10E1F00020696E737472756374696F6E20616464F4
+:10E2000072202020496E74657272757074006E6F92
+:10E2100020766563746F7200726A6D702020006AE8
+:10E220006D7020005768617420706F72743A0050EE
+:10E230006F7274206E6F7420737570706F72746576
+:10E2400064004D7573742062652061206C65747480
+:10E2500065720020005772697474696E67204545C5
+:10E260000052656164696E6720454500656570729E
+:10E270006F6D206572726F7220636F756E743D00F2
+:10E28000504F525400303D5A65726F206164647281
+:10E290006573732063747273003F3D435055207360
+:10E2A0007461747300403D454550524F4D20746574
+:10E2B000737400423D426C696E6B204C45440045CE
+:10E2C0003D44756D7020454550524F4D00463D44CC
+:10E2D000756D7020464C41534800483D48656C7050
+:10E2E000004C3D4C69737420492F4F20506F72745D
+:10E2F0007300513D517569742026206A756D702038
+:10E30000746F20757365722070676D00523D44759F
+:10E310006D702052414D00563D73686F7720696ED5
+:10E320007465727275707420566563746F727300D1
+:10E33000593D506F727420626C696E6B002A0052F6
+:10E340004553455400494E543000494E543100491C
+:10E350004E543200494E543300494E543400494E15
+:10E36000543500494E543600494E54370050434905
+:10E370004E5430005043494E5431005043494E549E
+:10E3800032005744540054494D45523020434F4DBC
+:10E3900050410054494D45523020434F4D504200AA
+:10E3A00054494D455230204F56460054494D455230
+:10E3B0003120434150540054494D45523120434F80
+:10E3C0004D50410054494D45523120434F4D50422C
+:10E3D0000054494D45523120434F4D50430054495C
+:10E3E0004D455231204F56460054494D455232203A
+:10E3F000434F4D50410054494D45523220434F4DFB
+:10E4000050420054494D455232204F56460054491F
+:10E410004D45523320434150540054494D455233E9
+:10E4200020434F4D50410054494D45523320434FF6
+:10E430004D50420054494D45523320434F4D5043B7
+:10E440000054494D455233204F56460054494D45DE
+:10E45000523420434150540054494D4552342043D6
+:10E460004F4D50410054494D45523420434F4D507B
+:10E47000420054494D45523420434F4D50430054BF
+:10E48000494D455234204F56460054494D4552356A
+:10E4900020434150540054494D45523520434F4D7F
+:10E4A00050410054494D45523520434F4D50420094
+:10E4B00054494D45523520434F4D50430054494D2A
+:10E4C000455235204F564600555341525430205244
+:10E4D000580055534152543020554452450055532D
+:10E4E0004152543020545800555341525431205217
+:10E4F000580055534152543120554452450055530C
+:10E5000041525431205458005553415254322052F4
+:10E5100058005553415254322055445245005553EA
+:10E5200041525432205458005553415254332052D2
+:10E5300058005553415254332055445245005553C9
+:10E5400041525433205458005350492053544300EF
+:10E5500041444300414E414C4F4720434F4D5000F2
+:10E560004545205245414459005457490053504DA8
+:10E57000205245414459002A003FE345E34AE34F16
+:10E58000E354E359E35EE363E368E36DE374E37B41
+:10E59000E382E3E9E3F6E303E4ABE3B7E3C4E3D107
+:10E5A000E3DEE386E393E3A0E348E5C8E4D2E4DEF8
+:10E5B000E454E550E560E50EE41AE427E434E44170
+:10E5C000E4E8E4F2E4FEE469E56DE54CE458E46572
+:10E5D000E472E47FE48AE496E4A3E4B0E4BDE408F2
+:10E5E000E512E51EE528E532E53EE50011241FBEF3
+:10E5F000CFEFD1E2DEBFCDBF01E00CBF12E0A0E063
+:10E60000B2E0EAEDFFEF03E00BBF02C007900D920E
+:10E61000A030B107D9F712E0A0E0B2E001C01D922E
+:10E62000AC30B107E1F70F94FBF40D94EBFF01E27E
+:10E630000EBF0FEF0DBF11241FBE0D94FBF40D9400
+:10E6400000F020E030E040ED57E005C0FA013197DE
+:10E65000F1F72F5F3F4F28173907C0F308959C014A
+:10E66000442737FD4095542FDA01C901860F911DCB
+:10E67000A11DB11DABBFFC018791882369F0809378
+:10E68000C6008091C00086FFFCCF8091C0008064EE
+:10E690008093C0006F5FE8CF08958DE08093C6003F
+:10E6A0008091C00086FFFCCF8091C0008064809381
+:10E6B000C0008AE08093C6008091C00086FFFCCF36
+:10E6C0008091C00080648093C00008950F942FF360
+:10E6D0000F944DF30895FC019081992359F0909384
+:10E6E000C6008091C00086FFFCCF8091C00080648E
+:10E6F0008093C0003196992379F70895282F982F99
+:10E7000092959F70892F805D8A3308F0895F80938E
+:10E71000C6008091C00086FFFCCF8091C00080645D
+:10E720008093C000822F8F70982F905D9A3308F0ED
+:10E73000995F9093C6008091C00086FFFCCF8091C6
+:10E74000C00080648093C00008959C01FB01853661
+:10E7500091051CF46330710594F0C90164E670E022
+:10E760000F948CFF605D7F4F6093C6008091C00066
+:10E7700086FFFCCF8091C00080648093C0002B3066
+:10E78000310514F43297B4F0C90164E670E00F94D7
+:10E790008CFF6AE070E00F948CFF605D7F4F6093A8
+:10E7A000C6008091C00086FFFCCF8091C0008064CD
+:10E7B0008093C000C9016AE070E00F948CFFC0969E
+:10E7C0008093C6008091C00086FFFCCF8091C0007E
+:10E7D00080648093C0000895282F277020642093C0
+:10E7E0007C0020917B0086958695869590E08170CF
+:10E7F000907033E0880F991F3A95E1F7277F282B17
+:10E8000020937B0080917A00806480937A008091CD
+:10E810007A0086FDFCCF2091780040917900942FFA
+:10E8200080E030E0282B392BC90108951F93182F61
+:10E8300080E892EE60E00F942FF31093C600809171
+:10E84000C00086FFFCCF8091C00080648093C00030
+:10E850000F944DF31F9108952F923F924F925F9224
+:10E860006F927F928F929F92AF92BF92CF92DF92E0
+:10E87000EF92FF920F931F93DF93CF93CDB7DEB745
+:10E8800062970FB6F894DEBF0FBECDBF382E622E52
+:10E89000CA01DB015C016D01772460E2262E2E01A6
+:10E8A0000894411C511C8BC081E0A81680E0B8067A
+:10E8B00081E0C80680E0D80628F0C601AA27BB2759
+:10E8C0000F947EF3BB27AD2D9C2D8B2D0F947EF3E3
+:10E8D0008A2D0F947EF32092C6008091C00086FF9F
+:10E8E000FCCF8091C00080648093C0009DE2909333
+:10E8F000C6008091C00086FFFCCF8091C00080647C
+:10E900008093C0002092C6008091C00086FFFCCF9B
+:10E910008091C00080648093C000198286017501D7
+:10E9200088249924A1E03A1651F03A1620F0B2E07A
+:10E930003B1661F409C00BBFF701779007C0C70110
+:10E940000F94D5FF782E02C0F7017080872D0F94A9
+:10E950007EF32092C6008091C00086FFFCCF80919C
+:10E96000C00080648093C000872D8052F401EF7056
+:10E97000F0708F3520F4E40DF51D708204C0E40DB5
+:10E98000F51D8EE280830894E11CF11C011D111D10
+:10E990000894811C911C90E18916910409F0C2CF62
+:10E9A00080E190E0A0E0B0E0A80EB91ECA1EDB1E18
+:10E9B000198AC2010F946BF30F944DF36A94662089
+:10E9C00009F072CF62960FB6F894DEBF0FBECDBFCE
+:10E9D000CF91DF911F910F91FF90EF90DF90CF903B
+:10E9E000BF90AF909F908F907F906F905F904F906F
+:10E9F0003F902F9008952F923F924F925F926F9287
+:10EA00007F928F929F92AF92BF92CF92DF92EF92BE
+:10EA1000FF920F931F93DF93CF93CDB7DEB7CD5304
+:10EA2000D1400FB6F894DEBF0FBECDBF279A2F9A04
+:10EA30008091C00082608093C00080E18093C40018
+:10EA400088E18093C1000000EE24FF248701B4E038
+:10EA5000AB2EB12CCC24DD2424C0C5010197F1F7E5
+:10EA60000894E11CF11C011D111D21E2E2162EE4A7
+:10EA7000F20620E0020720E0120718F0A1E0CA2EFB
+:10EA8000D12CC801B70128E53BE140E050E00F94EC
+:10EA90009FFF611571058105910519F485B18058B5
+:10EAA00085B98091C00087FD03C0C114D104A9F2CB
+:10EAB000A6014F5F5F4FC25EDE4F59834883CE5140
+:10EAC000D140C25EDE4F68817981CE51D140613044
+:10EAD000710511F00D946EFFC05DDE4F1982188232
+:10EAE000C053D14060E0C15DDE4F1882CF52D140AB
+:10EAF000AA24BB24C05EDE4F188219821A821B82B0
+:10EB0000C052D140CE5CDE4F188219821A821B821D
+:10EB1000C253D14080E090E0A0E0B0E0ABBFFC0188
+:10EB2000A791B691C45CDE4FB983A883CC53D14082
+:10EB30000D9469FFC25EDE4FE881F981CE51D1406C
+:10EB4000319709F52091C600C25EDE4F1982188206
+:10EB5000CE51D14022C02F5F3F4F4F4F5F4F2130EA
+:10EB6000F2E13F07FAE74F07F0E05F0780F0C45C8F
+:10EB7000DE4F08811981CC53D1400F5F1F4F19F030
+:10EB8000EE27FF27099420E030E040E050E080913C
+:10EB9000C00087FFE0CF2091C600213209F094C663
+:10EBA0000894A11CB11C33E0A316B10409F08EC671
+:10EBB00000E010E018C041E24093C6008091C00020
+:10EBC00086FFFCCF8091C00080648093C0002F5FDF
+:10EBD0003F4F2931310579F70F944DF30F5F1F4FE8
+:10EBE0000530110519F020E030E0E5CF1092080261
+:10EBF0001092090210920A0210920B021092040263
+:10EC00001092050210920602109207021092000262
+:10EC10001092010210920202109203028FEE90EE07
+:10EC200060E00F9466F380E191EE60E00F942FF3C3
+:10EC30008091C00087FFFCCF9091C600903608F00D
+:10EC40009F759032B8F09093C6008091C00086FF07
+:10EC5000FCCF8091C00080648093C00080E28093EC
+:10EC6000C6008091C00086FFFCCF8091C000806408
+:10EC70008093C000983409F4DBC19934B8F492341D
+:10EC800009F45DC1933458F4903319F1903308F4CA
+:10EC900018C69F33A1F1903409F013C6BDC0953456
+:10ECA00009F474C1963409F00CC69CC1923509F47C
+:10ECB0002FC2933538F49C3409F4F9C1913509F029
+:10ECC00000C61CC2963509F449C2993509F0F9C548
+:10ECD0009CC485E892EE62E00F9466F31092040201
+:10ECE000109205021092060210920702109208027A
+:10ECF0001092090210920A0210920B0217C189E9C0
+:10ED000092EE62E00F9466F38FEE90EE60E00F9467
+:10ED100066F381E291EE60E00F942FF381EC91EEC7
+:10ED200060E00F9466F381E391EE60E00F942FF3BF
+:10ED300084EE90EE60E00F9466F381E491EE60E083
+:10ED40000F942FF386E090E061E070E00F94A5F35C
+:10ED50000F944DF381E691EE60E00F942FF383ED75
+:10ED600091EE60E00F9466F381E591EE60E00F9420
+:10ED70002FF38DEC91EE60E00F9466F381E791EE56
+:10ED800060E00F942FF38EE10F947EF388E90F94E7
+:10ED90007EF381E00F947EF30F944DF381E891EEC2
+:10EDA00060E00F942FF319E0E0E0F0E010935700DB
+:10EDB000E4918E2F0F947EF30F944DF381E991EE41
+:10EDC00060E00F942FF3E3E0F0E010935700E4913C
+:10EDD0008E2F0F947EF30F944DF381EA91EE60E055
+:10EDE0000F942FF3E2E0F0E010935700E4918E2FA0
+:10EDF0000F947EF30F944DF381EB91EE60E00F944E
+:10EE00002FF3E1E0F0E0109357001491812F0F945D
+:10EE10007EF30F944DF307CF85EA92EE62E00F94F4
+:10EE200066F385E592EE60E00F9466F30F944DF380
+:10EE300000E010E019C0C8016F2D0F94DDFFFF2026
+:10EE400031F483E592EE60E00F942FF30BC0F09263
+:10EE5000C6008091C00086FFFCCF8091C000806416
+:10EE60008093C0000F5F1F4FC80181519F41AA27A7
+:10EE700097FDA095BA2FABBFFC01F7905AE2F516AB
+:10EE800021F062E000301607B1F60F944DF30F94B5
+:10EE90004DF381E692EE60E00F9466F30F944DF32C
+:10EEA000CC24DD2400E010E01EC0C8010F94D5FF83
+:10EEB000F82E882331F483E592EE60E00F942FF36F
+:10EEC0000BC08093C6008091C00086FFFCCF80916C
+:10EED000C00080648093C000FE1419F00894C11C27
+:10EEE000D11C0F5F1F4FC80181519F41AA2797FD79
+:10EEF000A095BA2FABBFFC01E7907AE2E71621F0AC
+:10EF000082E00030180789F60F944DF30F944DF30B
+:10EF10008CE692EE60E00F942FF3C60161E070E0A2
+:10EF20000F94A5F30F944DF30F944DF3109200023C
+:10EF300010920102109202021092030274CE83EB2F
+:10EF400092EE62E00F9466F3279A2F9A16C02F98DC
+:10EF500080E090E0E0EDF7E03197F1F7019684363C
+:10EF60009105C1F72F9A80E090E0E0EDF7E031974E
+:10EF7000F1F7019684369105C1F78091C00087FFB3
+:10EF8000E6CF8091C00087FFFCCF95C48FEB92EE57
+:10EF900062E00F9466F3409100025091010260918B
+:10EFA00002027091030281E020E10F942CF4809121
+:10EFB000000290910102A0910202B09103028050E0
+:10EFC0009F4FAF4FBF4F8093000290930102A093D9
+:10EFD0000202B093030280509041A040B04008F478
+:10EFE00022CEA4CF8DEC92EE62E00F9466F34091B6
+:10EFF000040250910502609106027091070280E0C0
+:10F0000020E10F942CF48091040290910502A091CC
+:10F010000602B091070280509F4FAF4FBF4F8093C1
+:10F02000040290930502A0930602B0930702FBCD61
+:10F030008AED92EE62E00F9466F385E892EE60E06E
+:10F040000F9466F389E992EE60E00F9466F385EA27
+:10F0500092EE60E00F9466F383EB92EE60E00F9423
+:10F0600066F38FEB92EE60E00F9466F38DEC92EE18
+:10F0700060E00F9466F38AED92EE60E00F9466F321
+:10F0800081EE92EE60E00F9466F382EF92EE60E024
+:10F090000F9466F38CE093EE60E00F9466F387E1E3
+:10F0A00093EE60E00F9466F380E393EEB9CD81EECA
+:10F0B00092EE62E00F9466F381E40F9416F482E41A
+:10F0C0000F9416F483E40F9416F484E40F9416F46A
+:10F0D00085E40F9416F486E40F9416F487E40F94F5
+:10F0E00016F488E40F9416F48AE40F9416F48BE473
+:10F0F0000F9416F48CE40F9416F495CD82EF92EEF3
+:10F1000062E00F9466F399249394AA24BB2445C427
+:10F110008CE093EE62E00F9466F340910802509108
+:10F12000090260910A0270910B0282E020E10F94C3
+:10F130002CF48091080290910902A0910A02B091EA
+:10F140000B0280509F4FAF4FBF4F809308029093A8
+:10F150000902A0930A02B0930B0265CD87E193EEFA
+:10F1600062E00F9466F384EE90EE60E00F9466F335
+:10F1700089ED91EE60E00F9466F309E715EECC5D42
+:10F18000DE4F19830883C452D1406624772443019B
+:10F19000CA5DDE4F19821882C652D140A401930184
+:10F1A0005695479537952795C85DDE4F2883398357
+:10F1B0004A835B83C852D140CA5DDE4F4881598182
+:10F1C000C652D1404F5F5F4FCA5DDE4F59834883BF
+:10F1D000C652D140CA0162E070E00F94A5F350E23C
+:10F1E0005093C6008091C00086FFFCCF8091C00084
+:10F1F00080648093C0006DE26093C6008091C0007F
+:10F2000086FFFCCF8091C00080648093C00070E2D4
+:10F210007093C6008091C00086FFFCCF8091C00033
+:10F2200080648093C000C85DDE4FE880F9800A8169
+:10F230001B81C852D140BB27A12F902F8F2D0F9437
+:10F240007EF3C85DDE4F8881C852D1400F947EF3B3
+:10F2500070E2F72EF092C6008091C00086FFFCCFCE
+:10F260008091C00080648093C0000DE30093C600CD
+:10F270008091C00086FFFCCF8091C00080648093A5
+:10F28000C00010E21093C6008091C00086FFFCCF42
+:10F290008091C00080648093C0008BBEF3012791F1
+:10F2A000C45DDE4F2883CC52D140A22EBB24CC2497
+:10F2B000DD240894611C711C811C911C8BBEF30120
+:10F2C0008791282E332444245524142D032DF22C09
+:10F2D000EE24EA0CFB1C0C1D1D1D0894611C711C06
+:10F2E000811C911C8BBEF3013791C35DDE4F3883C7
+:10F2F000CD52D1400894611C711C811C911C8BBEA5
+:10F30000F3014791C25DDE4F4883CE52D1402DEFCD
+:10F310003FEF4FEF5FEF620E731E841E951E0F943A
+:10F320007EF330E23093C6008091C00086FFFCCFB0
+:10F330008091C00080648093C000C45DDE4F8881EE
+:10F34000CC52D1400F947EF340E24093C6008091AE
+:10F35000C00086FFFCCF8091C00080648093C00015
+:10F36000C25DDE4F8881CE52D1400F947EF350E2D1
+:10F370005093C6008091C00086FFFCCF8091C000F2
+:10F3800080648093C000C35DDE4F8881CD52D14040
+:10F390000F947EF360E26093C6008091C00086FF08
+:10F3A000FCCF8091C00080648093C0007FEFE7169F
+:10F3B0007FEFF70670E0070770E0170731F48EE083
+:10F3C00092EE60E00F942FF3DFC0D801C701807088
+:10F3D000907CA070B0708050904CA040B040D1F5AF
+:10F3E0002FEF3FE340E050E0E222F3220423152315
+:10F3F000C85DDE4FA880B980CA80DB80C852D1408A
+:10F40000AE0CBF1CC01ED11EAA0CBB1CCC1CDD1C2C
+:10F4100088E192EE60E00F942FF3BB27A12F902F8D
+:10F420008F2D0F947EF38E2D0F947EF330E2309368
+:10F43000C6008091C00086FFFCCF8091C000806430
+:10F440008093C0004EE34093C6008091C00086FFC9
+:10F45000FCCF87C06EE07EEF80E090E0E622F722EE
+:10F46000082319237CE0E71674E9F70670E0070724
+:10F4700070E0170709F088C0C25DDE4F8881CE5268
+:10F48000D140E82EFF2400E010E0102F0F2DFE2CBD
+:10F49000EE24C35DDE4F9881CD52D140E90EF11CC0
+:10F4A000011D111DD601C50181709070A070B07052
+:10F4B000DC0199278827E80EF91E0A1F1B1F20EF81
+:10F4C00030E040E050E0A222B322C422D522F1E194
+:10F4D000AA0CBB1CCC1CDD1CFA95D1F7EA0CFB1C5A
+:10F4E0000C1D1D1D41E050E060E070E0242235223B
+:10F4F00046225722E5E1220C331C441C551CEA9598
+:10F50000D1F7E20CF31C041D151D57016801AA0C6C
+:10F51000BB1CCC1CDD1C8FE192EE60E00F942FF33E
+:10F52000C801AA27BB270F947EF3BB27A12F902FDA
+:10F530008F2D0F947EF38E2D0F947EF350E2509317
+:10F54000C6008091C00086FFFCCF8091C00080641F
+:10F550008093C0006EE36093C6008091C00086FF78
+:10F56000FCCF8091C00080648093C000C601AA27B0
+:10F57000BB270F947EF3BB27AD2D9C2D8B2D0F94B5
+:10F580007EF38A2D0F947EF370E27093C600809113
+:10F59000C00086FFFCCF8091C00080648093C000D3
+:10F5A000CC5DDE4FE881F981C452D140CF01AA275A
+:10F5B00097FDA095BA2FABBFFC018791969160E0B3
+:10F5C0000F942FF30F944DF3CC5DDE4F088119811A
+:10F5D000C452D1400E5F1F4FCC5DDE4F19830883AC
+:10F5E000C452D140CA5DDE4F28813981C652D14014
+:10F5F0002933310509F417CB44E050E060E070E0B6
+:10F60000640E751E861E971EC9CD80E393EE62E0E0
+:10F610000F9466F384E292EE60E00F942FF38091F2
+:10F62000C00087FFFCCF1091C6001F751093C60065
+:10F630008091C00086FFFCCF8091C00080648093E1
+:10F64000C0000F944DF3812F81548A3108F036C1E8
+:10F65000163409F495C0173490F4133409F44EC0ED
+:10F66000143430F41134F1F0123409F01DC130C0FB
+:10F67000143409F459C0153409F016C16BC01A349A
+:10F6800009F4C4C01B3438F4173409F48FC018349B
+:10F6900009F00AC1A1C01B3409F4D2C01C3409F01E
+:10F6A00003C1E8C08FEF81B90DC082B1809582B9E6
+:10F6B00080E090E0E0EDF7E03197F1F70196883CCB
+:10F6C0009105C1F78091C00087FFEFCF12B8EFC05E
+:10F6D0008FEF84B90DC085B1809585B980E090E049
+:10F6E000E0EDF7E03197F1F70196883C9105C1F71D
+:10F6F0008091C00087FFEFCF15B8D9C08FEF87B9D1
+:10F700000DC088B1809588B980E090E0E0EDF7E029
+:10F710003197F1F70196883C9105C1F78091C000BF
+:10F7200087FFEFCF18B8C3C08FEF8AB90DC08BB178
+:10F7300080958BB980E090E0E0EDF7E03197F1F74C
+:10F740000196883C9105C1F78091C00087FFEFCFFB
+:10F750001BB8ADC08FEF8DB90DC08EB180958EB93D
+:10F7600080E090E0E0EDF7E03197F1F70196883C1A
+:10F770009105C1F78091C00087FFEFCF1EB897C0F9
+:10F780008FEF80BB0DC081B3809581BB80E090E09E
+:10F79000E0EDF7E03197F1F70196883C9105C1F76C
+:10F7A0008091C00087FFEFCF11BA81C08FEF83BB7C
+:10F7B0000DC084B3809584BB80E090E0E0EDF7E07D
+:10F7C0003197F1F70196883C9105C1F78091C0000F
+:10F7D00087FFEFCF14BA6BC08FEF809301010FC08A
+:10F7E0008091020180958093020180E090E0E0ED3D
+:10F7F000F7E03197F1F70196883C9105C1F78091C8
+:10F80000C00087FFEDCF1092020151C08FEF8093AF
+:10F8100004010FC08091050180958093050180E06F
+:10F8200090E0E0EDF7E03197F1F70196883C910523
+:10F83000C1F78091C00087FFEDCF1092050137C05E
+:10F840008FEF809307010FC080910801809580930E
+:10F85000080180E090E0E0EDF7E03197F1F70196E4
+:10F86000883C9105C1F78091C00087FFEDCF1092D1
+:10F8700008011DC08FEF80930A010FC080910B011A
+:10F88000809580930B0180E090E0E0EDF7E0319708
+:10F89000F1F70196883C9105C1F78091C00087FF80
+:10F8A000EDCF10920B0103C08FE292EEB9C98091A7
+:10F8B000C00087FFFCCF8091C600B5C982E492EEFC
+:10F8C000AFC98CE191EEACC9AA24BB24933061F19D
+:10F8D000943028F4913089F0923008F508C09530C2
+:10F8E000B1F1953040F1963009F053C04EC02B3144
+:10F8F00009F020C991E06BE11DC9213041F0C15DE3
+:10F90000DE4F5881CF52D140251709F002C362273C
+:10F91000C15DDE4F2883CF52D14092E00BC9B22F98
+:10F92000A0E0622793E006C9822F90E0A82BB92BB4
+:10F93000622794E0FFC82E3009F0EBC2622795E001
+:10F94000C05DDE4F19821882C053D140F3C8E1E098
+:10F95000F0E0EC0FFD1FC05DDE4FE880F980C05382
+:10F96000D140EE0DFF1D208387010F5F1F4FC05D4B
+:10F97000DE4F19830883C053D14062270A171B0743
+:10F9800009F0D8C8D80196E0D5C8261709F0C1C239
+:10F9900003C0973009F0CEC899248981833109F4D6
+:10F9A000FCC08431C8F4863009F4C2C0873050F4FA
+:10F9B000823009F4F0C0833009F458C0813009F076
+:10F9C0000AC23EC0813109F462C0823108F0A6C08B
+:10F9D000803109F000C2DFC0883109F472C089317A
+:10F9E00050F4853109F4D9C0853108F477C18631E6
+:10F9F00009F0F1C173C18A3109F457C08A3108F4A2
+:10FA00007CC08B3109F446C08D3109F0E4C18D8191
+:10FA1000803311F090E00AC08F81882311F49EE1B9
+:10FA200005C0813011F091E001C098E91A821B8273
+:10FA30008D818C831D829E831F8227E030E0CFC1A1
+:10FA40001A8288E08B8381E48C8386E58D8382E54E
+:10FA50008E8389E48F8383E5888780E589878FE5B6
+:10FA60008A8782E38B872BE030E0B9C18A818139B4
+:10FA700041F0823941F0803911F48FE005C080E017
+:10FA800003C082E001C08AE01A828B8344C09924BB
+:10FA9000939481C08D81882311F48EE12CC0813034
+:10FAA00011F081E028C088E926C01A82E1E0F0E088
+:10FAB00089E08093570084918B831C8224E030E09E
+:10FAC0008EC18B81803589F48C81883039F4E2E0F5
+:10FAD000F0E089E08093570084910DC0E0E0F0E011
+:10FAE00089E080935700849106C0E3E0F0E089E06C
+:10FAF0008093570084911A82DFCF8D81836C99E0C7
+:10FB0000E1E0F0E0082E90935700E89507B600FC7E
+:10FB1000FDCF1A821B8223E030E061C11A82CE5CE5
+:10FB2000DE4F188219821A821B82C253D14055C1FE
+:10FB30008A8190E0A0E0B0E0582F442733272227A5
+:10FB40008B8190E0A0E0B0E0DC0199278827282B8A
+:10FB5000392B4A2B5B2B8D8190E0A0E0B0E0282B65
+:10FB6000392B4A2B5B2B8C8190E0A0E0B0E0BA2FC0
+:10FB7000A92F982F8827282B392B4A2B5B2B220F54
+:10FB8000331F441F551FC05EDE4F288339834A83CD
+:10FB90005B83C052D1401A8220C19A812B8183316C
+:10FBA00049F0C05EDE4F488159816A817B81C05235
+:10FBB000D1408AC0CE5CDE4F488159816A817B8109
+:10FBC000C253D140403080EC580783E0680780E0A2
+:10FBD0007807F0F483E0FA0160935B0080935700AC
+:10FBE000E89507B600FCFDCFCE5CDE4F4881598119
+:10FBF0006A817B81C253D14040505F4F6F4F7F4F2E
+:10FC0000CE5CDE4F488359836A837B83C253D140E5
+:10FC1000C95CDE4F9883C753D140CA5CDE4F18825F
+:10FC2000C653D140022F10E0CA5CDE4F6881798153
+:10FC3000C653D140062B172BC05EDE4F4881598139
+:10FC40006A817B81C052D140DE011B9631E08C91EC
+:10FC500011962C9111971296C75CDE4F2883C953D9
+:10FC6000D140C85CDE4F1882C853D14090E0C85CD8
+:10FC7000DE4FE881F981C853D1408E2B9F2B0C01B8
+:10FC8000FA0160935B0030935700E89511244E5FB2
+:10FC90005F4F6F4F7F4F02501040C9F685E0C05E46
+:10FCA000DE4FE880F9800A811B81C052D140F70104
+:10FCB00000935B0080935700E89507B600FCFDCFEA
+:10FCC00081E180935700E8951A82C05EDE4F488339
+:10FCD00059836A837B83C052D1407FC0FA80C55C60
+:10FCE000DE4FF882CB53D140C65CDE4F1882CA5338
+:10FCF000D1408B81C82EDD24C65CDE4F088119817E
+:10FD0000CA53D140C02AD12A1A828981BE016D5FAF
+:10FD10007F4F843121F59601C05EDE4FE880F98087
+:10FD20000A811B81C052D1400BBFF7018791969188
+:10FD3000DB018C9311969C936E5F7F4FD801C701B6
+:10FD40000296A11DB11DC05EDE4F88839983AA83F0
+:10FD5000BB83C052D14022503040F1F636C0C05E65
+:10FD6000DE4F288139814A815B81C052D14008949D
+:10FD7000C108D108760100E010E00894C11CD11C34
+:10FD80000894E11CF11C011D111DE20EF31E041F5D
+:10FD9000151F21BDBB27A52F942F832F82BD2F5F59
+:10FDA0003F4F4F4F5F4FF89A80B5DB018D93BD01F8
+:10FDB0002E153F054007510761F7C05EDE4F2883CF
+:10FDC00039834A835B83C052D14096012D5F3F4FF8
+:10FDD000FB01108204C080EC8A8322E030E08BE1DA
+:10FDE0008093C6008091C00086FFFCCF8091C00048
+:10FDF00080648093C000C15DDE4FF881CF52D14056
+:10FE0000F093C6008091C00086FFFCCF8091C000B7
+:10FE100080648093C000432F3093C6008091C0005F
+:10FE200086FFFCCF8091C00080648093C000922F39
+:10FE30002093C6008091C00086FFFCCF8091C00057
+:10FE400080648093C0008EE08093C6008091C000E3
+:10FE500086FFFCCF8091C00080648093C00065E184
+:10FE6000C15DDE4FE880CF52D1406E2569276427FF
+:10FE7000FE01319610C090819093C6008091C00021
+:10FE800086FFFCCF31968091C00080648093C000D3
+:10FE90006927215030402115310569F76093C6006C
+:10FEA0008091C00086FFFCCF8091C0008064809369
+:10FEB000C00085B1805885B9992081F4C15DDE4FBD
+:10FEC0000881CF52D1400F5FC15DDE4F0883CF5212
+:10FED000D14090E0A0E0B0E00D949AF527982F98DB
+:10FEE00080E090E020ED37E0F9013197F1F70196DD
+:10FEF00084369105C9F700008091C0008D7F809302
+:10FF0000C00081E180935700E895EE27FF27099410
+:10FF1000FFCF90E00D949AF597FB092E07260AD0A3
+:10FF200077FD04D02ED006D000201AF4709561958C
+:10FF30007F4F0895F6F7909581959F4F0895A1E220
+:10FF40001A2EAA1BBB1BFD010DC0AA1FBB1FEE1F53
+:10FF5000FF1FA217B307E407F50720F0A21BB30B9E
+:10FF6000E40BF50B661F771F881F991F1A9469F71A
+:10FF700060957095809590959B01AC01BD01CF0176
+:10FF80000895AA1BBB1B51E107C0AA1FBB1FA617E0
+:10FF9000B70710F0A61BB70B881F991F5A95A9F732
+:10FFA00080959095BC01CD010895F999FECF92BD41
+:10FFB00081BDF89A992780B50895262FF999FECF2B
+:10FFC0001FBA92BD81BD20BD0FB6F894FA9AF99A76
+:0AFFD0000FBE01960895F894FFCFCC
+:040000033000E000E9
+:00000001FF
|