first commitHEADmaster

37 files changed, 5010 insertions, 0 deletions

diff --git a/test/ardmake/hardware/cores/arduino/HardwareSerial.cpp b/test/ardmake/hardware/cores/arduino/HardwareSerial.cpp
new file mode 100644
index 0000000..4397efb
--- /dev/null
+++ b/test/ardmake/hardware/cores/arduino/HardwareSerial.cpp
@@ -0,0 +1,303 @@
+/*
+  HardwareSerial.cpp - Hardware serial library for Wiring
+  Copyright (c) 2006 Nicholas Zambetti.  All right reserved.
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+  Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+  
+  Modified 23 November 2006 by David A. Mellis
+  Modified 28 September 2010 by Mark Sproul
+*/
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <inttypes.h>
+#include "wiring.h"
+#include "wiring_private.h"
+
+// this next line disables the entire HardwareSerial.cpp, 
+// this is so I can support Attiny series and any other chip without a uart
+#if defined(UBRRH) || defined(UBRR0H) || defined(UBRR1H) || defined(UBRR2H) || defined(UBRR3H)
+
+#include "HardwareSerial.h"
+
+// Define constants and variables for buffering incoming serial data.  We're
+// using a ring buffer (I think), in which rx_buffer_head is the index of the
+// location to which to write the next incoming character and rx_buffer_tail
+// is the index of the location from which to read.
+#if (RAMEND < 1000)
+  #define RX_BUFFER_SIZE 32
+#else
+  #define RX_BUFFER_SIZE 128
+#endif
+
+struct ring_buffer
+{
+  unsigned char buffer[RX_BUFFER_SIZE];
+  int head;
+  int tail;
+};
+
+#if defined(UBRRH) || defined(UBRR0H)
+  ring_buffer rx_buffer  =  { { 0 }, 0, 0 };
+#endif
+#if defined(UBRR1H)
+  ring_buffer rx_buffer1  =  { { 0 }, 0, 0 };
+#endif
+#if defined(UBRR2H)
+  ring_buffer rx_buffer2  =  { { 0 }, 0, 0 };
+#endif
+#if defined(UBRR3H)
+  ring_buffer rx_buffer3  =  { { 0 }, 0, 0 };
+#endif
+
+inline void store_char(unsigned char c, ring_buffer *rx_buffer)
+{
+  int i = (unsigned int)(rx_buffer->head + 1) % RX_BUFFER_SIZE;
+
+  // if we should be storing the received character into the location
+  // just before the tail (meaning that the head would advance to the
+  // current location of the tail), we're about to overflow the buffer
+  // and so we don't write the character or advance the head.
+  if (i != rx_buffer->tail) {
+    rx_buffer->buffer[rx_buffer->head] = c;
+    rx_buffer->head = i;
+  }
+}
+
+#if defined(USART_RX_vect)
+  SIGNAL(USART_RX_vect)
+  {
+  #if defined(UDR0)
+    unsigned char c  =  UDR0;
+  #elif defined(UDR)
+    unsigned char c  =  UDR;  //  atmega8535
+  #else
+    #error UDR not defined
+  #endif
+    store_char(c, &rx_buffer);
+  }
+#elif defined(SIG_USART0_RECV) && defined(UDR0)
+  SIGNAL(SIG_USART0_RECV)
+  {
+    unsigned char c  =  UDR0;
+    store_char(c, &rx_buffer);
+  }
+#elif defined(SIG_UART0_RECV) && defined(UDR0)
+  SIGNAL(SIG_UART0_RECV)
+  {
+    unsigned char c  =  UDR0;
+    store_char(c, &rx_buffer);
+  }
+//#elif defined(SIG_USART_RECV)
+#elif defined(USART0_RX_vect)
+  // fixed by Mark Sproul this is on the 644/644p
+  //SIGNAL(SIG_USART_RECV)
+  SIGNAL(USART0_RX_vect)
+  {
+  #if defined(UDR0)
+    unsigned char c  =  UDR0;
+  #elif defined(UDR)
+    unsigned char c  =  UDR;  //  atmega8, atmega32
+  #else
+    #error UDR not defined
+  #endif
+    store_char(c, &rx_buffer);
+  }
+#elif defined(SIG_UART_RECV)
+  // this is for atmega8
+  SIGNAL(SIG_UART_RECV)
+  {
+  #if defined(UDR0)
+    unsigned char c  =  UDR0;  //  atmega645
+  #elif defined(UDR)
+    unsigned char c  =  UDR;  //  atmega8
+  #endif
+    store_char(c, &rx_buffer);
+  }
+#elif defined(USBCON)
+  #warning No interrupt handler for usart 0
+  #warning Serial(0) is on USB interface
+#else
+  #error No interrupt handler for usart 0
+#endif
+
+//#if defined(SIG_USART1_RECV)
+#if defined(USART1_RX_vect)
+  //SIGNAL(SIG_USART1_RECV)
+  SIGNAL(USART1_RX_vect)
+  {
+    unsigned char c = UDR1;
+    store_char(c, &rx_buffer1);
+  }
+#elif defined(SIG_USART1_RECV)
+  #error SIG_USART1_RECV
+#endif
+
+#if defined(USART2_RX_vect) && defined(UDR2)
+  SIGNAL(USART2_RX_vect)
+  {
+    unsigned char c = UDR2;
+    store_char(c, &rx_buffer2);
+  }
+#elif defined(SIG_USART2_RECV)
+  #error SIG_USART2_RECV
+#endif
+
+#if defined(USART3_RX_vect) && defined(UDR3)
+  SIGNAL(USART3_RX_vect)
+  {
+    unsigned char c = UDR3;
+    store_char(c, &rx_buffer3);
+  }
+#elif defined(SIG_USART3_RECV)
+  #error SIG_USART3_RECV
+#endif
+
+
+
+// Constructors ////////////////////////////////////////////////////////////////
+
+HardwareSerial::HardwareSerial(ring_buffer *rx_buffer,
+  volatile uint8_t *ubrrh, volatile uint8_t *ubrrl,
+  volatile uint8_t *ucsra, volatile uint8_t *ucsrb,
+  volatile uint8_t *udr,
+  uint8_t rxen, uint8_t txen, uint8_t rxcie, uint8_t udre, uint8_t u2x)
+{
+  _rx_buffer = rx_buffer;
+  _ubrrh = ubrrh;
+  _ubrrl = ubrrl;
+  _ucsra = ucsra;
+  _ucsrb = ucsrb;
+  _udr = udr;
+  _rxen = rxen;
+  _txen = txen;
+  _rxcie = rxcie;
+  _udre = udre;
+  _u2x = u2x;
+}
+
+// Public Methods //////////////////////////////////////////////////////////////
+
+void HardwareSerial::begin(long baud)
+{
+  uint16_t baud_setting;
+  bool use_u2x = true;
+
+#if F_CPU == 16000000UL
+  // hardcoded exception for compatibility with the bootloader shipped
+  // with the Duemilanove and previous boards and the firmware on the 8U2
+  // on the Uno and Mega 2560.
+  if (baud == 57600) {
+    use_u2x = false;
+  }
+#endif
+  
+  if (use_u2x) {
+    *_ucsra = 1 << _u2x;
+    baud_setting = (F_CPU / 4 / baud - 1) / 2;
+  } else {
+    *_ucsra = 0;
+    baud_setting = (F_CPU / 8 / baud - 1) / 2;
+  }
+
+  // assign the baud_setting, a.k.a. ubbr (USART Baud Rate Register)
+  *_ubrrh = baud_setting >> 8;
+  *_ubrrl = baud_setting;
+
+  sbi(*_ucsrb, _rxen);
+  sbi(*_ucsrb, _txen);
+  sbi(*_ucsrb, _rxcie);
+}
+
+void HardwareSerial::end()
+{
+  cbi(*_ucsrb, _rxen);
+  cbi(*_ucsrb, _txen);
+  cbi(*_ucsrb, _rxcie);  
+}
+
+int HardwareSerial::available(void)
+{
+  return (unsigned int)(RX_BUFFER_SIZE + _rx_buffer->head - _rx_buffer->tail) % RX_BUFFER_SIZE;
+}
+
+int HardwareSerial::peek(void)
+{
+  if (_rx_buffer->head == _rx_buffer->tail) {
+    return -1;
+  } else {
+    return _rx_buffer->buffer[_rx_buffer->tail];
+  }
+}
+
+int HardwareSerial::read(void)
+{
+  // if the head isn't ahead of the tail, we don't have any characters
+  if (_rx_buffer->head == _rx_buffer->tail) {
+    return -1;
+  } else {
+    unsigned char c = _rx_buffer->buffer[_rx_buffer->tail];
+    _rx_buffer->tail = (unsigned int)(_rx_buffer->tail + 1) % RX_BUFFER_SIZE;
+    return c;
+  }
+}
+
+void HardwareSerial::flush()
+{
+  // don't reverse this or there may be problems if the RX interrupt
+  // occurs after reading the value of rx_buffer_head but before writing
+  // the value to rx_buffer_tail; the previous value of rx_buffer_head
+  // may be written to rx_buffer_tail, making it appear as if the buffer
+  // don't reverse this or there may be problems if the RX interrupt
+  // occurs after reading the value of rx_buffer_head but before writing
+  // the value to rx_buffer_tail; the previous value of rx_buffer_head
+  // may be written to rx_buffer_tail, making it appear as if the buffer
+  // were full, not empty.
+  _rx_buffer->head = _rx_buffer->tail;
+}
+
+void HardwareSerial::write(uint8_t c)
+{
+  while (!((*_ucsra) & (1 << _udre)))
+    ;
+
+  *_udr = c;
+}
+
+// Preinstantiate Objects //////////////////////////////////////////////////////
+
+#if defined(UBRRH) && defined(UBRRL)
+  HardwareSerial Serial(&rx_buffer, &UBRRH, &UBRRL, &UCSRA, &UCSRB, &UDR, RXEN, TXEN, RXCIE, UDRE, U2X);
+#elif defined(UBRR0H) && defined(UBRR0L)
+  HardwareSerial Serial(&rx_buffer, &UBRR0H, &UBRR0L, &UCSR0A, &UCSR0B, &UDR0, RXEN0, TXEN0, RXCIE0, UDRE0, U2X0);
+#elif defined(USBCON)
+  #warning no serial port defined  (port 0)
+#else
+  #error no serial port defined  (port 0)
+#endif
+
+#if defined(UBRR1H)
+  HardwareSerial Serial1(&rx_buffer1, &UBRR1H, &UBRR1L, &UCSR1A, &UCSR1B, &UDR1, RXEN1, TXEN1, RXCIE1, UDRE1, U2X1);
+#endif
+#if defined(UBRR2H)
+  HardwareSerial Serial2(&rx_buffer2, &UBRR2H, &UBRR2L, &UCSR2A, &UCSR2B, &UDR2, RXEN2, TXEN2, RXCIE2, UDRE2, U2X2);
+#endif
+#if defined(UBRR3H)
+  HardwareSerial Serial3(&rx_buffer3, &UBRR3H, &UBRR3L, &UCSR3A, &UCSR3B, &UDR3, RXEN3, TXEN3, RXCIE3, UDRE3, U2X3);
+#endif
+
+#endif // whole file
+
diff --git a/test/ardmake/hardware/cores/arduino/HardwareSerial.d b/test/ardmake/hardware/cores/arduino/HardwareSerial.d
new file mode 100644
index 0000000..92f1cc9
--- /dev/null
+++ b/test/ardmake/hardware/cores/arduino/HardwareSerial.d
@@ -0,0 +1,28 @@
+ardmake/hardware/cores/arduino/HardwareSerial.o ardmake/hardware/cores/arduino/HardwareSerial.d: ardmake/hardware/cores/arduino/HardwareSerial.cpp \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/stdlib.h \
+  /usr/lib/gcc/avr/4.3.5/include/stddef.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/stdio.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/inttypes.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/stdint.h \
+  /usr/lib/gcc/avr/4.3.5/include/stdarg.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/string.h \
+  ardmake/hardware/cores/arduino/wiring.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/io.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/sfr_defs.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/iom328p.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/portpins.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/common.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/version.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/fuse.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/lock.h \
+  ardmake/hardware/cores/arduino/binary.h \
+  ardmake/hardware/cores/arduino/wiring_private.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/interrupt.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/delay.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/util/delay.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/util/delay_basic.h \
+  ardmake/hardware/cores/arduino/HardwareSerial.h \
+  ardmake/hardware/cores/arduino/Stream.h \
+  ardmake/hardware/cores/arduino/Print.h \
+  ardmake/hardware/cores/arduino/WString.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/ctype.h
diff --git a/test/ardmake/hardware/cores/arduino/HardwareSerial.h b/test/ardmake/hardware/cores/arduino/HardwareSerial.h
new file mode 100644
index 0000000..3efa775
--- /dev/null
+++ b/test/ardmake/hardware/cores/arduino/HardwareSerial.h
@@ -0,0 +1,76 @@
+/*
+  HardwareSerial.h - Hardware serial library for Wiring
+  Copyright (c) 2006 Nicholas Zambetti.  All right reserved.
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+  Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+
+  Modified 28 September 2010 by Mark Sproul
+*/
+
+#ifndef HardwareSerial_h
+#define HardwareSerial_h
+
+#include <inttypes.h>
+
+#include "Stream.h"
+
+struct ring_buffer;
+
+class HardwareSerial : public Stream
+{
+  private:
+    ring_buffer *_rx_buffer;
+    volatile uint8_t *_ubrrh;
+    volatile uint8_t *_ubrrl;
+    volatile uint8_t *_ucsra;
+    volatile uint8_t *_ucsrb;
+    volatile uint8_t *_udr;
+    uint8_t _rxen;
+    uint8_t _txen;
+    uint8_t _rxcie;
+    uint8_t _udre;
+    uint8_t _u2x;
+  public:
+    HardwareSerial(ring_buffer *rx_buffer,
+      volatile uint8_t *ubrrh, volatile uint8_t *ubrrl,
+      volatile uint8_t *ucsra, volatile uint8_t *ucsrb,
+      volatile uint8_t *udr,
+      uint8_t rxen, uint8_t txen, uint8_t rxcie, uint8_t udre, uint8_t u2x);
+    void begin(long);
+    void end();
+    virtual int available(void);
+    virtual int peek(void);
+    virtual int read(void);
+    virtual void flush(void);
+    virtual void write(uint8_t);
+    using Print::write; // pull in write(str) and write(buf, size) from Print
+};
+
+#if defined(UBRRH) || defined(UBRR0H)
+  extern HardwareSerial Serial;
+#elif defined(USBCON)
+  #include "usb_api.h"
+#endif
+#if defined(UBRR1H)
+  extern HardwareSerial Serial1;
+#endif
+#if defined(UBRR2H)
+  extern HardwareSerial Serial2;
+#endif
+#if defined(UBRR3H)
+  extern HardwareSerial Serial3;
+#endif
+
+#endif
diff --git a/test/ardmake/hardware/cores/arduino/Makefile b/test/ardmake/hardware/cores/arduino/Makefile
new file mode 100644
index 0000000..b606b39
--- /dev/null
+++ b/test/ardmake/hardware/cores/arduino/Makefile
@@ -0,0 +1,250 @@
+# Arduino Makefile
+# Arduino adaptation by mellis, eighthave, oli.keller
+#
+# This makefile allows you to build sketches from the command line
+# without the Arduino environment (or Java).
+#
+# Note, this Makefile has been edited by the Debian package maintainer, so
+# there's a reasonable chance it'll simply work without the need to edit it
+# but just in case, here are the instructions:
+#
+# Detailed instructions for using the makefile:
+#
+#  1. Copy this file into the folder with your sketch. There should be a
+#     file with the same name as the folder and with the extension .pde
+#     (e.g. foo.pde in the foo/ folder).
+#
+#  2. Modify the line containg "INSTALL_DIR" to point to the directory that
+#     contains the Arduino installation (for example, under Mac OS X, this
+#     might be /Applications/arduino-0012).
+#
+#  3. Modify the line containing "PORT" to refer to the filename
+#     representing the USB or serial connection to your Arduino board
+#     (e.g. PORT = /dev/tty.USB0).  If the exact name of this file
+#     changes, you can use * as a wildcard (e.g. PORT = /dev/tty.usb*).
+#
+#  4. Set the line containing "MCU" to match your board's processor. 
+#     Older one's are atmega8 based, newer ones like Arduino Mini, Bluetooth
+#     or Diecimila have the atmega168.  If you're using a LilyPad Arduino,
+#     change F_CPU to 8000000.
+#
+#  5. At the command line, change to the directory containing your
+#     program's file and the makefile.
+#
+#  6. Type "make" and press enter to compile/verify your program.
+#
+#  7. Type "make upload", reset your Arduino board, and press enter to
+#     upload your program to the Arduino board.
+#
+# $Id$
+
+TARGET = $(notdir $(CURDIR))
+#INSTALL_DIR = ../../..
+PORT = /dev/ttyUSB*
+UPLOAD_RATE = 57600
+AVRDUDE_PROGRAMMER = stk500v1
+MCU = atmega168
+F_CPU = 16000000
+
+############################################################################
+# Below here nothing should be changed...
+
+ARDUINO = /usr/share/arduino/hardware/arduino/cores/arduino
+AVR_TOOLS_PATH = /usr/bin
+SRC = $(ARDUINO)/pins_arduino.c $(ARDUINO)/wiring.c \
+$(ARDUINO)/wiring_analog.c $(ARDUINO)/wiring_digital.c \
+$(ARDUINO)/wiring_pulse.c $(ARDUINO)/wiring_shift.c \
+$(ARDUINO)/WInterrupts.c
+CXXSRC = $(ARDUINO)/HardwareSerial.cpp $(ARDUINO)/WMath.cpp \
+$(ARDUINO)/Print.cpp
+FORMAT = ihex
+
+
+# Name of this Makefile (used for "make depend").
+MAKEFILE = Makefile
+
+# Debugging format.
+# Native formats for AVR-GCC's -g are stabs [default], or dwarf-2.
+# AVR (extended) COFF requires stabs, plus an avr-objcopy run.
+DEBUG = stabs
+
+OPT = s
+
+# Place -D or -U options here
+CDEFS = -DF_CPU=$(F_CPU)
+CXXDEFS = -DF_CPU=$(F_CPU)
+
+# Place -I options here
+CINCS = -I$(ARDUINO)
+CXXINCS = -I$(ARDUINO)
+
+# Compiler flag to set the C Standard level.
+# c89   - "ANSI" C
+# gnu89 - c89 plus GCC extensions
+# c99   - ISO C99 standard (not yet fully implemented)
+# gnu99 - c99 plus GCC extensions
+CSTANDARD = -std=gnu99
+CDEBUG = -g$(DEBUG)
+CWARN = -Wall -Wstrict-prototypes
+CTUNING = -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums
+#CEXTRA = -Wa,-adhlns=$(<:.c=.lst)
+
+CFLAGS = $(CDEBUG) $(CDEFS) $(CINCS) -O$(OPT) $(CWARN) $(CSTANDARD) $(CEXTRA)
+CXXFLAGS = $(CDEFS) $(CINCS) -O$(OPT)
+#ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs 
+LDFLAGS = -lm
+
+
+# Programming support using avrdude. Settings and variables.
+AVRDUDE_PORT = $(PORT)
+AVRDUDE_WRITE_FLASH = -U flash:w:applet/$(TARGET).hex
+AVRDUDE_FLAGS = -V -F \
+-p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) \
+-b $(UPLOAD_RATE)
+
+# Program settings
+CC = $(AVR_TOOLS_PATH)/avr-gcc
+CXX = $(AVR_TOOLS_PATH)/avr-g++
+OBJCOPY = $(AVR_TOOLS_PATH)/avr-objcopy
+OBJDUMP = $(AVR_TOOLS_PATH)/avr-objdump
+AR  = $(AVR_TOOLS_PATH)/avr-ar
+SIZE = $(AVR_TOOLS_PATH)/avr-size
+NM = $(AVR_TOOLS_PATH)/avr-nm
+AVRDUDE = $(AVR_TOOLS_PATH)/avrdude
+REMOVE = rm -f
+MV = mv -f
+
+# Define all object files.
+OBJ = $(SRC:%.c=build/%.o) $(CXXSRC:%.cpp=build/%.o) $(ASRC:%.S=build/%.o)
+
+# Define all listing files.
+LST = $(ASRC:%.S=build/%.lst) $(CXXSRC:%.cpp=build/%.lst) $(SRC:%.c=build/%.lst)
+
+# Combine all necessary flags and optional flags.
+# Add target processor to flags.
+ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS)
+ALL_CXXFLAGS = -mmcu=$(MCU) -I. $(CXXFLAGS)
+ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
+
+
+# Default target.
+all: applet_files build sizeafter
+
+build: elf hex 
+
+applet_files: $(TARGET).pde
+	# Here is the "preprocessing".
+	# It creates a .cpp file based with the same name as the .pde file.
+	# On top of the new .cpp file comes the WProgram.h header.
+	# At the end there is a generic main() function attached.
+	# Then the .cpp file will be compiled. Errors during compile will
+	# refer to this new, automatically generated, file. 
+	# Not the original .pde file you actually edit...
+	test -d applet || mkdir applet
+	echo '#include "WProgram.h"' > applet/$(TARGET).cpp
+	cat $(TARGET).pde >> applet/$(TARGET).cpp
+	cat $(ARDUINO)/main.cxx >> applet/$(TARGET).cpp
+
+elf: applet/$(TARGET).elf
+hex: applet/$(TARGET).hex
+eep: applet/$(TARGET).eep
+lss: applet/$(TARGET).lss 
+sym: applet/$(TARGET).sym
+
+# Program the device.  
+upload: applet/$(TARGET).hex
+	stty -F $(AVRDUDE_PORT) hupcl ; sleep 0.1 ; stty -F $(AVRDUDE_PORT) -hupcl
+	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH)
+
+
+	# Display size of file.
+HEXSIZE = $(SIZE) --target=$(FORMAT) applet/$(TARGET).hex
+ELFSIZE = $(SIZE)  applet/$(TARGET).elf
+sizebefore:
+	@if [ -f applet/$(TARGET).elf ]; then echo; echo $(MSG_SIZE_BEFORE); $(HEXSIZE); echo; fi
+
+sizeafter:
+	@if [ -f applet/$(TARGET).elf ]; then echo; echo $(MSG_SIZE_AFTER); $(HEXSIZE); echo; fi
+
+
+# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
+COFFCONVERT=$(OBJCOPY) --debugging \
+--change-section-address .data-0x800000 \
+--change-section-address .bss-0x800000 \
+--change-section-address .noinit-0x800000 \
+--change-section-address .eeprom-0x810000 
+
+
+coff: applet/$(TARGET).elf
+	$(COFFCONVERT) -O coff-avr applet/$(TARGET).elf $(TARGET).cof
+
+
+extcoff: $(TARGET).elf
+	$(COFFCONVERT) -O coff-ext-avr applet/$(TARGET).elf $(TARGET).cof
+
+
+.SUFFIXES: .elf .hex .eep .lss .sym
+
+.elf.hex:
+	$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
+
+.elf.eep:
+	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
+	--change-section-lma .eeprom=0 -O $(FORMAT) $< $@
+
+# Create extended listing file from ELF output file.
+.elf.lss:
+	$(OBJDUMP) -h -S $< > $@
+
+# Create a symbol table from ELF output file.
+.elf.sym:
+	$(NM) -n $< > $@
+
+	# Link: create ELF output file from library.
+applet/$(TARGET).elf: $(TARGET).pde applet/core.a 
+	$(CXX) $(ALL_CXXFLAGS) -o $@ applet/$(TARGET).cpp -L. applet/core.a $(LDFLAGS)
+
+applet/core.a: $(OBJ)
+	@for i in $(OBJ); do echo $(AR) rcs applet/core.a $$i; $(AR) rcs applet/core.a $$i; done
+
+
+
+# Compile: create object files from C++ source files.
+build/%.o: %.cpp
+	mkdir -p $(dir $@)
+	$(CXX) -c $(ALL_CXXFLAGS) $< -o $@ 
+
+# Compile: create object files from C source files.
+build/%.o: %.c
+	mkdir -p $(dir $@)
+	$(CC) -c $(ALL_CFLAGS) $< -o $@ 
+
+
+# Compile: create assembler files from C source files.
+build/%.s: %.c
+	$(CC) -S $(ALL_CFLAGS) $< -o $@
+
+
+# Assemble: create object files from assembler source files.
+.S.o:
+	$(CC) -c $(ALL_ASFLAGS) $< -o $@
+
+
+# Automatic dependencies
+build/%.d: %.c
+	$(CC) -M $(ALL_CFLAGS) $< | sed "s;$(notdir $*).o:;$*.o $*.d:;" > $@
+
+build/%.d: %.cpp
+	$(CXX) -M $(ALL_CXXFLAGS) $< | sed "s;$(notdir $*).o:;$*.o $*.d:;" > $@
+
+
+# Target: clean project.
+clean:
+	$(REMOVE) applet/$(TARGET).hex applet/$(TARGET).eep applet/$(TARGET).cof applet/$(TARGET).elf \
+	applet/$(TARGET).map applet/$(TARGET).sym applet/$(TARGET).lss applet/core.a \
+	$(OBJ) $(LST) $(SRC:%.c=build/%.s) $(SRC:%.c=build/%.d) $(CXXSRC:%.cpp=build/%.s) $(CXXSRC:%.cpp=build/%.d)
+
+.PHONY:	all build elf hex eep lss sym program coff extcoff clean applet_files sizebefore sizeafter
+
+-include $(SRC:%.c=build/%.d)
+-include $(CXXSRC:%.cpp=build/%.d)
diff --git a/test/ardmake/hardware/cores/arduino/Print.cpp b/test/ardmake/hardware/cores/arduino/Print.cpp
new file mode 100644
index 0000000..4ee556d
--- /dev/null
+++ b/test/ardmake/hardware/cores/arduino/Print.cpp
@@ -0,0 +1,220 @@
+/*
+ Print.cpp - Base class that provides print() and println()
+ Copyright (c) 2008 David A. Mellis.  All right reserved.
+ 
+ This library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+ 
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ Lesser General Public License for more details.
+ 
+ You should have received a copy of the GNU Lesser General Public
+ License along with this library; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ 
+ Modified 23 November 2006 by David A. Mellis
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <math.h>
+#include "wiring.h"
+
+#include "Print.h"
+
+// Public Methods //////////////////////////////////////////////////////////////
+
+/* default implementation: may be overridden */
+void Print::write(const char *str)
+{
+  while (*str)
+    write(*str++);
+}
+
+/* default implementation: may be overridden */
+void Print::write(const uint8_t *buffer, size_t size)
+{
+  while (size--)
+    write(*buffer++);
+}
+
+void Print::print(const String &s)
+{
+  for (int i = 0; i < s.length(); i++) {
+    write(s[i]);
+  }
+}
+
+void Print::print(const char str[])
+{
+  write(str);
+}
+
+void Print::print(char c, int base)
+{
+  print((long) c, base);
+}
+
+void Print::print(unsigned char b, int base)
+{
+  print((unsigned long) b, base);
+}
+
+void Print::print(int n, int base)
+{
+  print((long) n, base);
+}
+
+void Print::print(unsigned int n, int base)
+{
+  print((unsigned long) n, base);
+}
+
+void Print::print(long n, int base)
+{
+  if (base == 0) {
+    write(n);
+  } else if (base == 10) {
+    if (n < 0) {
+      print('-');
+      n = -n;
+    }
+    printNumber(n, 10);
+  } else {
+    printNumber(n, base);
+  }
+}
+
+void Print::print(unsigned long n, int base)
+{
+  if (base == 0) write(n);
+  else printNumber(n, base);
+}
+
+void Print::print(double n, int digits)
+{
+  printFloat(n, digits);
+}
+
+void Print::println(void)
+{
+  print('\r');
+  print('\n');  
+}
+
+void Print::println(const String &s)
+{
+  print(s);
+  println();
+}
+
+void Print::println(const char c[])
+{
+  print(c);
+  println();
+}
+
+void Print::println(char c, int base)
+{
+  print(c, base);
+  println();
+}
+
+void Print::println(unsigned char b, int base)
+{
+  print(b, base);
+  println();
+}
+
+void Print::println(int n, int base)
+{
+  print(n, base);
+  println();
+}
+
+void Print::println(unsigned int n, int base)
+{
+  print(n, base);
+  println();
+}
+
+void Print::println(long n, int base)
+{
+  print(n, base);
+  println();
+}
+
+void Print::println(unsigned long n, int base)
+{
+  print(n, base);
+  println();
+}
+
+void Print::println(double n, int digits)
+{
+  print(n, digits);
+  println();
+}
+
+// Private Methods /////////////////////////////////////////////////////////////
+
+void Print::printNumber(unsigned long n, uint8_t base)
+{
+  unsigned char buf[8 * sizeof(long)]; // Assumes 8-bit chars. 
+  unsigned long i = 0;
+
+  if (n == 0) {
+    print('0');
+    return;
+  } 
+
+  while (n > 0) {
+    buf[i++] = n % base;
+    n /= base;
+  }
+
+  for (; i > 0; i--)
+    print((char) (buf[i - 1] < 10 ?
+      '0' + buf[i - 1] :
+      'A' + buf[i - 1] - 10));
+}
+
+void Print::printFloat(double number, uint8_t digits) 
+{ 
+  // Handle negative numbers
+  if (number < 0.0)
+  {
+     print('-');
+     number = -number;
+  }
+
+  // Round correctly so that print(1.999, 2) prints as "2.00"
+  double rounding = 0.5;
+  for (uint8_t i=0; i<digits; ++i)
+    rounding /= 10.0;
+  
+  number += rounding;
+
+  // Extract the integer part of the number and print it
+  unsigned long int_part = (unsigned long)number;
+  double remainder = number - (double)int_part;
+  print(int_part);
+
+  // Print the decimal point, but only if there are digits beyond
+  if (digits > 0)
+    print("."); 
+
+  // Extract digits from the remainder one at a time
+  while (digits-- > 0)
+  {
+    remainder *= 10.0;
+    int toPrint = int(remainder);
+    print(toPrint);
+    remainder -= toPrint; 
+  } 
+}
diff --git a/test/ardmake/hardware/cores/arduino/Print.d b/test/ardmake/hardware/cores/arduino/Print.d
new file mode 100644
index 0000000..bf5b85f
--- /dev/null
+++ b/test/ardmake/hardware/cores/arduino/Print.d
@@ -0,0 +1,22 @@
+ardmake/hardware/cores/arduino/Print.o ardmake/hardware/cores/arduino/Print.d: ardmake/hardware/cores/arduino/Print.cpp \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/stdlib.h \
+  /usr/lib/gcc/avr/4.3.5/include/stddef.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/stdio.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/inttypes.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/stdint.h \
+  /usr/lib/gcc/avr/4.3.5/include/stdarg.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/string.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/math.h \
+  ardmake/hardware/cores/arduino/wiring.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/io.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/sfr_defs.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/iom328p.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/portpins.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/common.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/version.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/fuse.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/lock.h \
+  ardmake/hardware/cores/arduino/binary.h \
+  ardmake/hardware/cores/arduino/Print.h \
+  ardmake/hardware/cores/arduino/WString.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/ctype.h
diff --git a/test/ardmake/hardware/cores/arduino/Print.h b/test/ardmake/hardware/cores/arduino/Print.h
new file mode 100644
index 0000000..b092ae5
--- /dev/null
+++ b/test/ardmake/hardware/cores/arduino/Print.h
@@ -0,0 +1,66 @@
+/*
+  Print.h - Base class that provides print() and println()
+  Copyright (c) 2008 David A. Mellis.  All right reserved.
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+  Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#ifndef Print_h
+#define Print_h
+
+#include <inttypes.h>
+#include <stdio.h> // for size_t
+
+#include "WString.h"
+
+#define DEC 10
+#define HEX 16
+#define OCT 8
+#define BIN 2
+#define BYTE 0
+
+class Print
+{
+  private:
+    void printNumber(unsigned long, uint8_t);
+    void printFloat(double, uint8_t);
+  public:
+    virtual void write(uint8_t) = 0;
+    virtual void write(const char *str);
+    virtual void write(const uint8_t *buffer, size_t size);
+    
+    void print(const String &);
+    void print(const char[]);
+    void print(char, int = BYTE);
+    void print(unsigned char, int = BYTE);
+    void print(int, int = DEC);
+    void print(unsigned int, int = DEC);
+    void print(long, int = DEC);
+    void print(unsigned long, int = DEC);
+    void print(double, int = 2);
+
+    void println(const String &s);
+    void println(const char[]);
+    void println(char, int = BYTE);
+    void println(unsigned char, int = BYTE);
+    void println(int, int = DEC);
+    void println(unsigned int, int = DEC);
+    void println(long, int = DEC);
+    void println(unsigned long, int = DEC);
+    void println(double, int = 2);
+    void println(void);
+};
+
+#endif
diff --git a/test/ardmake/hardware/cores/arduino/README.Makefile b/test/ardmake/hardware/cores/arduino/README.Makefile
new file mode 100644
index 0000000..01f3c4a
--- /dev/null
+++ b/test/ardmake/hardware/cores/arduino/README.Makefile
@@ -0,0 +1,11 @@
+The Makefile here is based on the one that was in Arduino 0017
+but has since been dropped by the upstream developers.
+
+It is preserved in the Debian package to allow command-line usage without
+introducing java dependancies, so if you want to report bugs against
+it, please report them against whichever distribution you are using,
+and NOT against the upstream source, as that would be pointless, and
+will irritate the developers who dropped the file in order to eliminate
+bug reports against the Makefile.
+
+The same goes for the main.cxx file.
diff --git a/test/ardmake/hardware/cores/arduino/Stream.h b/test/ardmake/hardware/cores/arduino/Stream.h
new file mode 100644
index 0000000..93d8275
--- /dev/null
+++ b/test/ardmake/hardware/cores/arduino/Stream.h
@@ -0,0 +1,35 @@
+/*
+  Stream.h - base class for character-based streams.
+  Copyright (c) 2010 David A. Mellis.  All right reserved.
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+  Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#ifndef Stream_h
+#define Stream_h
+
+#include <inttypes.h>
+#include "Print.h"
+
+class Stream : public Print
+{
+  public:
+    virtual int available() = 0;
+    virtual int read() = 0;
+    virtual int peek() = 0;
+    virtual void flush() = 0;
+};
+
+#endif
diff --git a/test/ardmake/hardware/cores/arduino/Tone.cpp b/test/ardmake/hardware/cores/arduino/Tone.cpp
new file mode 100644
index 0000000..c3910e7
--- /dev/null
+++ b/test/ardmake/hardware/cores/arduino/Tone.cpp
@@ -0,0 +1,601 @@
+/* Tone.cpp
+
+  A Tone Generator Library
+
+  Written by Brett Hagman
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+  Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+
+Version Modified By Date     Comments
+------- ----------- -------- --------
+0001    B Hagman    09/08/02 Initial coding
+0002    B Hagman    09/08/18 Multiple pins
+0003    B Hagman    09/08/18 Moved initialization from constructor to begin()
+0004    B Hagman    09/09/26 Fixed problems with ATmega8
+0005    B Hagman    09/11/23 Scanned prescalars for best fit on 8 bit timers
+                    09/11/25 Changed pin toggle method to XOR
+                    09/11/25 Fixed timer0 from being excluded
+0006    D Mellis    09/12/29 Replaced objects with functions
+0007    M Sproul    10/08/29 Changed #ifdefs from cpu to register
+*************************************************/
+
+#include <avr/interrupt.h>
+#include <avr/pgmspace.h>
+#include "wiring.h"
+#include "pins_arduino.h"
+
+#if defined(__AVR_ATmega8__) || defined(__AVR_ATmega128__)
+#define TCCR2A TCCR2
+#define TCCR2B TCCR2
+#define COM2A1 COM21
+#define COM2A0 COM20
+#define OCR2A OCR2
+#define TIMSK2 TIMSK
+#define OCIE2A OCIE2
+#define TIMER2_COMPA_vect TIMER2_COMP_vect
+#define TIMSK1 TIMSK
+#endif
+
+// timerx_toggle_count:
+//  > 0 - duration specified
+//  = 0 - stopped
+//  < 0 - infinitely (until stop() method called, or new play() called)
+
+#if !defined(__AVR_ATmega8__)
+volatile long timer0_toggle_count;
+volatile uint8_t *timer0_pin_port;
+volatile uint8_t timer0_pin_mask;
+#endif
+
+volatile long timer1_toggle_count;
+volatile uint8_t *timer1_pin_port;
+volatile uint8_t timer1_pin_mask;
+volatile long timer2_toggle_count;
+volatile uint8_t *timer2_pin_port;
+volatile uint8_t timer2_pin_mask;
+
+#if defined(TIMSK3)
+volatile long timer3_toggle_count;
+volatile uint8_t *timer3_pin_port;
+volatile uint8_t timer3_pin_mask;
+#endif
+
+#if defined(TIMSK4)
+volatile long timer4_toggle_count;
+volatile uint8_t *timer4_pin_port;
+volatile uint8_t timer4_pin_mask;
+#endif
+
+#if defined(TIMSK5)
+volatile long timer5_toggle_count;
+volatile uint8_t *timer5_pin_port;
+volatile uint8_t timer5_pin_mask;
+#endif
+
+
+// MLS: This does not make sense, the 3 options are the same
+#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
+
+#define AVAILABLE_TONE_PINS 1
+
+const uint8_t PROGMEM tone_pin_to_timer_PGM[] = { 2 /*, 3, 4, 5, 1, 0 */ };
+static uint8_t tone_pins[AVAILABLE_TONE_PINS] = { 255 /*, 255, 255, 255, 255, 255 */ };
+
+#elif defined(__AVR_ATmega8__)
+
+#define AVAILABLE_TONE_PINS 1
+
+const uint8_t PROGMEM tone_pin_to_timer_PGM[] = { 2 /*, 1 */ };
+static uint8_t tone_pins[AVAILABLE_TONE_PINS] = { 255 /*, 255 */ };
+
+#else
+
+#define AVAILABLE_TONE_PINS 1
+
+// Leave timer 0 to last.
+const uint8_t PROGMEM tone_pin_to_timer_PGM[] = { 2 /*, 1, 0 */ };
+static uint8_t tone_pins[AVAILABLE_TONE_PINS] = { 255 /*, 255, 255 */ };
+
+#endif
+
+
+
+static int8_t toneBegin(uint8_t _pin)
+{
+  int8_t _timer = -1;
+
+  // if we're already using the pin, the timer should be configured.  
+  for (int i = 0; i < AVAILABLE_TONE_PINS; i++) {
+    if (tone_pins[i] == _pin) {
+      return pgm_read_byte(tone_pin_to_timer_PGM + i);
+    }
+  }
+  
+  // search for an unused timer.
+  for (int i = 0; i < AVAILABLE_TONE_PINS; i++) {
+    if (tone_pins[i] == 255) {
+      tone_pins[i] = _pin;
+      _timer = pgm_read_byte(tone_pin_to_timer_PGM + i);
+      break;
+    }
+  }
+  
+  if (_timer != -1)
+  {
+    // Set timer specific stuff
+    // All timers in CTC mode
+    // 8 bit timers will require changing prescalar values,
+    // whereas 16 bit timers are set to either ck/1 or ck/64 prescalar
+    switch (_timer)
+    {
+      #if defined(TCCR0A) && defined(TCCR0B)
+      case 0:
+        // 8 bit timer
+        TCCR0A = 0;
+        TCCR0B = 0;
+        bitWrite(TCCR0A, WGM01, 1);
+        bitWrite(TCCR0B, CS00, 1);
+        timer0_pin_port = portOutputRegister(digitalPinToPort(_pin));
+        timer0_pin_mask = digitalPinToBitMask(_pin);
+        break;
+      #endif
+
+      #if defined(TCCR1A) && defined(TCCR1B) && defined(WGM12)
+      case 1:
+        // 16 bit timer
+        TCCR1A = 0;
+        TCCR1B = 0;
+        bitWrite(TCCR1B, WGM12, 1);
+        bitWrite(TCCR1B, CS10, 1);
+        timer1_pin_port = portOutputRegister(digitalPinToPort(_pin));
+        timer1_pin_mask = digitalPinToBitMask(_pin);
+        break;
+      #endif
+
+      #if defined(TCCR2A) && defined(TCCR2B)
+      case 2:
+        // 8 bit timer
+        TCCR2A = 0;
+        TCCR2B = 0;
+        bitWrite(TCCR2A, WGM21, 1);
+        bitWrite(TCCR2B, CS20, 1);
+        timer2_pin_port = portOutputRegister(digitalPinToPort(_pin));
+        timer2_pin_mask = digitalPinToBitMask(_pin);
+        break;
+      #endif
+
+      #if defined(TCCR3A) && defined(TCCR3B) &&  defined(TIMSK3)
+      case 3:
+        // 16 bit timer
+        TCCR3A = 0;
+        TCCR3B = 0;
+        bitWrite(TCCR3B, WGM32, 1);
+        bitWrite(TCCR3B, CS30, 1);
+        timer3_pin_port = portOutputRegister(digitalPinToPort(_pin));
+        timer3_pin_mask = digitalPinToBitMask(_pin);
+        break;
+      #endif
+
+      #if defined(TCCR4A) && defined(TCCR4B) &&  defined(TIMSK4)
+      case 4:
+        // 16 bit timer
+        TCCR4A = 0;
+        TCCR4B = 0;
+        #if defined(WGM42)
+          bitWrite(TCCR4B, WGM42, 1);
+        #elif defined(CS43)
+          #warning this may not be correct
+          // atmega32u4
+          bitWrite(TCCR4B, CS43, 1);
+        #endif
+        bitWrite(TCCR4B, CS40, 1);
+        timer4_pin_port = portOutputRegister(digitalPinToPort(_pin));
+        timer4_pin_mask = digitalPinToBitMask(_pin);
+        break;
+      #endif
+
+      #if defined(TCCR5A) && defined(TCCR5B) &&  defined(TIMSK5)
+      case 5:
+        // 16 bit timer
+        TCCR5A = 0;
+        TCCR5B = 0;
+        bitWrite(TCCR5B, WGM52, 1);
+        bitWrite(TCCR5B, CS50, 1);
+        timer5_pin_port = portOutputRegister(digitalPinToPort(_pin));
+        timer5_pin_mask = digitalPinToBitMask(_pin);
+        break;
+      #endif
+    }
+  }
+
+  return _timer;
+}
+
+
+
+// frequency (in hertz) and duration (in milliseconds).
+
+void tone(uint8_t _pin, unsigned int frequency, unsigned long duration)
+{
+  uint8_t prescalarbits = 0b001;
+  long toggle_count = 0;
+  uint32_t ocr = 0;
+  int8_t _timer;
+
+  _timer = toneBegin(_pin);
+
+  if (_timer >= 0)
+  {
+    // Set the pinMode as OUTPUT
+    pinMode(_pin, OUTPUT);
+    
+    // if we are using an 8 bit timer, scan through prescalars to find the best fit
+    if (_timer == 0 || _timer == 2)
+    {
+      ocr = F_CPU / frequency / 2 - 1;
+      prescalarbits = 0b001;  // ck/1: same for both timers
+      if (ocr > 255)
+      {
+        ocr = F_CPU / frequency / 2 / 8 - 1;
+        prescalarbits = 0b010;  // ck/8: same for both timers
+
+        if (_timer == 2 && ocr > 255)
+        {
+          ocr = F_CPU / frequency / 2 / 32 - 1;
+          prescalarbits = 0b011;
+        }
+
+        if (ocr > 255)
+        {
+          ocr = F_CPU / frequency / 2 / 64 - 1;
+          prescalarbits = _timer == 0 ? 0b011 : 0b100;
+
+          if (_timer == 2 && ocr > 255)
+          {
+            ocr = F_CPU / frequency / 2 / 128 - 1;
+            prescalarbits = 0b101;
+          }
+
+          if (ocr > 255)
+          {
+            ocr = F_CPU / frequency / 2 / 256 - 1;
+            prescalarbits = _timer == 0 ? 0b100 : 0b110;
+            if (ocr > 255)
+            {
+              // can't do any better than /1024
+              ocr = F_CPU / frequency / 2 / 1024 - 1;
+              prescalarbits = _timer == 0 ? 0b101 : 0b111;
+            }
+          }
+        }
+      }
+
+#if defined(TCCR0B)
+      if (_timer == 0)
+      {
+        TCCR0B = prescalarbits;
+      }
+      else
+#endif
+#if defined(TCCR2B)
+      {
+        TCCR2B = prescalarbits;
+      }
+#else
+      {
+        // dummy place holder to make the above ifdefs work
+      }
+#endif
+    }
+    else
+    {
+      // two choices for the 16 bit timers: ck/1 or ck/64
+      ocr = F_CPU / frequency / 2 - 1;
+
+      prescalarbits = 0b001;
+      if (ocr > 0xffff)
+      {
+        ocr = F_CPU / frequency / 2 / 64 - 1;
+        prescalarbits = 0b011;
+      }
+
+      if (_timer == 1)
+      {
+#if defined(TCCR1B)
+        TCCR1B = (TCCR1B & 0b11111000) | prescalarbits;
+#endif
+      }
+#if defined(TCCR3B)
+      else if (_timer == 3)
+        TCCR3B = (TCCR3B & 0b11111000) | prescalarbits;
+#endif
+#if defined(TCCR4B)
+      else if (_timer == 4)
+        TCCR4B = (TCCR4B & 0b11111000) | prescalarbits;
+#endif
+#if defined(TCCR5B)
+      else if (_timer == 5)
+        TCCR5B = (TCCR5B & 0b11111000) | prescalarbits;
+#endif
+
+    }
+    
+
+    // Calculate the toggle count
+    if (duration > 0)
+    {
+      toggle_count = 2 * frequency * duration / 1000;
+    }
+    else
+    {
+      toggle_count = -1;
+    }
+
+    // Set the OCR for the given timer,
+    // set the toggle count,
+    // then turn on the interrupts
+    switch (_timer)
+    {
+
+#if defined(OCR0A) && defined(TIMSK0) && defined(OCIE0A)
+      case 0:
+        OCR0A = ocr;
+        timer0_toggle_count = toggle_count;
+        bitWrite(TIMSK0, OCIE0A, 1);
+        break;
+#endif
+
+      case 1:
+#if defined(OCR1A) && defined(TIMSK1) && defined(OCIE1A)
+        OCR1A = ocr;
+        timer1_toggle_count = toggle_count;
+        bitWrite(TIMSK1, OCIE1A, 1);
+#elif defined(OCR1A) && defined(TIMSK) && defined(OCIE1A)
+        // this combination is for at least the ATmega32
+        OCR1A = ocr;
+        timer1_toggle_count = toggle_count;
+        bitWrite(TIMSK, OCIE1A, 1);
+#endif
+        break;
+
+#if defined(OCR2A) && defined(TIMSK2) && defined(OCIE2A)
+      case 2:
+        OCR2A = ocr;
+        timer2_toggle_count = toggle_count;
+        bitWrite(TIMSK2, OCIE2A, 1);
+        break;
+#endif
+
+#if defined(TIMSK3)
+      case 3:
+        OCR3A = ocr;
+        timer3_toggle_count = toggle_count;
+        bitWrite(TIMSK3, OCIE3A, 1);
+        break;
+#endif
+
+#if defined(TIMSK4)
+      case 4:
+        OCR4A = ocr;
+        timer4_toggle_count = toggle_count;
+        bitWrite(TIMSK4, OCIE4A, 1);
+        break;
+#endif
+
+#if defined(OCR5A) && defined(TIMSK5) && defined(OCIE5A)
+      case 5:
+        OCR5A = ocr;
+        timer5_toggle_count = toggle_count;
+        bitWrite(TIMSK5, OCIE5A, 1);
+        break;
+#endif
+
+    }
+  }
+}
+
+
+// XXX: this function only works properly for timer 2 (the only one we use
+// currently).  for the others, it should end the tone, but won't restore
+// proper PWM functionality for the timer.
+void disableTimer(uint8_t _timer)
+{
+  switch (_timer)
+  {
+    case 0:
+      #if defined(TIMSK0)
+        TIMSK0 = 0;
+      #elif defined(TIMSK)
+        TIMSK = 0; // atmega32
+      #endif
+      break;
+
+#if defined(TIMSK1) && defined(OCIE1A)
+    case 1:
+      bitWrite(TIMSK1, OCIE1A, 0);
+      break;
+#endif
+
+    case 2:
+      #if defined(TIMSK2) && defined(OCIE2A)
+        bitWrite(TIMSK2, OCIE2A, 0); // disable interrupt
+      #endif
+      #if defined(TCCR2A) && defined(WGM20)
+        TCCR2A = (1 << WGM20);
+      #endif
+      #if defined(TCCR2B) && defined(CS22)
+        TCCR2B = (TCCR2B & 0b11111000) | (1 << CS22);
+      #endif
+      #if defined(OCR2A)
+        OCR2A = 0;
+      #endif
+      break;
+
+#if defined(TIMSK3)
+    case 3:
+      TIMSK3 = 0;
+      break;
+#endif
+
+#if defined(TIMSK4)
+    case 4:
+      TIMSK4 = 0;
+      break;
+#endif
+
+#if defined(TIMSK5)
+    case 5:
+      TIMSK5 = 0;
+      break;
+#endif
+  }
+}
+
+
+void noTone(uint8_t _pin)
+{
+  int8_t _timer = -1;
+  
+  for (int i = 0; i < AVAILABLE_TONE_PINS; i++) {
+    if (tone_pins[i] == _pin) {
+      _timer = pgm_read_byte(tone_pin_to_timer_PGM + i);
+      tone_pins[i] = 255;
+    }
+  }
+  
+  disableTimer(_timer);
+
+  digitalWrite(_pin, 0);
+}
+
+#if 0
+#if !defined(__AVR_ATmega8__)
+ISR(TIMER0_COMPA_vect)
+{
+  if (timer0_toggle_count != 0)
+  {
+    // toggle the pin
+    *timer0_pin_port ^= timer0_pin_mask;
+
+    if (timer0_toggle_count > 0)
+      timer0_toggle_count--;
+  }
+  else
+  {
+    disableTimer(0);
+    *timer0_pin_port &= ~(timer0_pin_mask);  // keep pin low after stop
+  }
+}
+#endif
+
+
+ISR(TIMER1_COMPA_vect)
+{
+  if (timer1_toggle_count != 0)
+  {
+    // toggle the pin
+    *timer1_pin_port ^= timer1_pin_mask;
+
+    if (timer1_toggle_count > 0)
+      timer1_toggle_count--;
+  }
+  else
+  {
+    disableTimer(1);
+    *timer1_pin_port &= ~(timer1_pin_mask);  // keep pin low after stop
+  }
+}
+#endif
+
+
+ISR(TIMER2_COMPA_vect)
+{
+
+  if (timer2_toggle_count != 0)
+  {
+    // toggle the pin
+    *timer2_pin_port ^= timer2_pin_mask;
+
+    if (timer2_toggle_count > 0)
+      timer2_toggle_count--;
+  }
+  else
+  {
+    // need to call noTone() so that the tone_pins[] entry is reset, so the
+    // timer gets initialized next time we call tone().
+    // XXX: this assumes timer 2 is always the first one used.
+    noTone(tone_pins[0]);
+//    disableTimer(2);
+//    *timer2_pin_port &= ~(timer2_pin_mask);  // keep pin low after stop
+  }
+}
+
+
+
+//#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
+#if 0
+
+ISR(TIMER3_COMPA_vect)
+{
+  if (timer3_toggle_count != 0)
+  {
+    // toggle the pin
+    *timer3_pin_port ^= timer3_pin_mask;
+
+    if (timer3_toggle_count > 0)
+      timer3_toggle_count--;
+  }
+  else
+  {
+    disableTimer(3);
+    *timer3_pin_port &= ~(timer3_pin_mask);  // keep pin low after stop
+  }
+}
+
+ISR(TIMER4_COMPA_vect)
+{
+  if (timer4_toggle_count != 0)
+  {
+    // toggle the pin
+    *timer4_pin_port ^= timer4_pin_mask;
+
+    if (timer4_toggle_count > 0)
+      timer4_toggle_count--;
+  }
+  else
+  {
+    disableTimer(4);
+    *timer4_pin_port &= ~(timer4_pin_mask);  // keep pin low after stop
+  }
+}
+
+ISR(TIMER5_COMPA_vect)
+{
+  if (timer5_toggle_count != 0)
+  {
+    // toggle the pin
+    *timer5_pin_port ^= timer5_pin_mask;
+
+    if (timer5_toggle_count > 0)
+      timer5_toggle_count--;
+  }
+  else
+  {
+    disableTimer(5);
+    *timer5_pin_port &= ~(timer5_pin_mask);  // keep pin low after stop
+  }
+}
+
+#endif
diff --git a/test/ardmake/hardware/cores/arduino/WCharacter.h b/test/ardmake/hardware/cores/arduino/WCharacter.h
new file mode 100644
index 0000000..79733b5
--- /dev/null
+++ b/test/ardmake/hardware/cores/arduino/WCharacter.h
@@ -0,0 +1,168 @@
+/*
+ WCharacter.h - Character utility functions for Wiring & Arduino
+ Copyright (c) 2010 Hernando Barragan.  All right reserved.
+ 
+ This library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+ 
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ Lesser General Public License for more details.
+ 
+ You should have received a copy of the GNU Lesser General Public
+ License along with this library; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#ifndef Character_h
+#define Character_h
+
+#include <ctype.h>
+
+// WCharacter.h prototypes
+inline boolean isAlphaNumeric(int c) __attribute__((always_inline));
+inline boolean isAlpha(int c) __attribute__((always_inline));
+inline boolean isAscii(int c) __attribute__((always_inline));
+inline boolean isWhitespace(int c) __attribute__((always_inline));
+inline boolean isControl(int c) __attribute__((always_inline));
+inline boolean isDigit(int c) __attribute__((always_inline));
+inline boolean isGraph(int c) __attribute__((always_inline));
+inline boolean isLowerCase(int c) __attribute__((always_inline));
+inline boolean isPrintable(int c) __attribute__((always_inline));
+inline boolean isPunct(int c) __attribute__((always_inline));
+inline boolean isSpace(int c) __attribute__((always_inline));
+inline boolean isUpperCase(int c) __attribute__((always_inline));
+inline boolean isHexadecimalDigit(int c) __attribute__((always_inline));
+inline int toAscii(int c) __attribute__((always_inline));
+inline int toLowerCase(int c) __attribute__((always_inline));
+inline int toUpperCase(int c)__attribute__((always_inline));
+
+
+// Checks for an alphanumeric character. 
+// It is equivalent to (isalpha(c) || isdigit(c)).
+inline boolean isAlphaNumeric(int c) 
+{
+  return ( isalnum(c) == 0 ? false : true);
+}
+
+
+// Checks for an alphabetic character. 
+// It is equivalent to (isupper(c) || islower(c)).
+inline boolean isAlpha(int c)
+{
+  return ( isalpha(c) == 0 ? false : true);
+}
+
+
+// Checks whether c is a 7-bit unsigned char value 
+// that fits into the ASCII character set.
+inline boolean isAscii(int c)
+{
+  return ( isascii (c) == 0 ? false : true);
+}
+
+
+// Checks for a blank character, that is, a space or a tab.
+inline boolean isWhitespace(int c)
+{
+  return ( isblank (c) == 0 ? false : true);
+}
+
+
+// Checks for a control character.
+inline boolean isControl(int c)
+{
+  return ( iscntrl (c) == 0 ? false : true);
+}
+
+
+// Checks for a digit (0 through 9).
+inline boolean isDigit(int c)
+{
+  return ( isdigit (c) == 0 ? false : true);
+}
+
+
+// Checks for any printable character except space.
+inline boolean isGraph(int c)
+{
+  return ( isgraph (c) == 0 ? false : true);
+}
+
+
+// Checks for a lower-case character.
+inline boolean isLowerCase(int c)
+{
+  return (islower (c) == 0 ? false : true);
+}
+
+
+// Checks for any printable character including space.
+inline boolean isPrintable(int c)
+{
+  return ( isprint (c) == 0 ? false : true);
+}
+
+
+// Checks for any printable character which is not a space 
+// or an alphanumeric character.
+inline boolean isPunct(int c)
+{
+  return ( ispunct (c) == 0 ? false : true);
+}
+
+
+// Checks for white-space characters. For the avr-libc library, 
+// these are: space, formfeed ('\f'), newline ('\n'), carriage 
+// return ('\r'), horizontal tab ('\t'), and vertical tab ('\v').
+inline boolean isSpace(int c)
+{
+  return ( isspace (c) == 0 ? false : true);
+}
+
+
+// Checks for an uppercase letter.
+inline boolean isUpperCase(int c)
+{
+  return ( isupper (c) == 0 ? false : true);
+}
+
+
+// Checks for a hexadecimal digits, i.e. one of 0 1 2 3 4 5 6 7 
+// 8 9 a b c d e f A B C D E F.
+inline boolean isHexadecimalDigit(int c)
+{
+  return ( isxdigit (c) == 0 ? false : true);
+}
+
+
+// Converts c to a 7-bit unsigned char value that fits into the 
+// ASCII character set, by clearing the high-order bits.
+inline int toAscii(int c)
+{
+  return toascii (c);
+}
+
+
+// Warning:
+// Many people will be unhappy if you use this function. 
+// This function will convert accented letters into random 
+// characters.
+
+// Converts the letter c to lower case, if possible.
+inline int toLowerCase(int c)
+{
+  return tolower (c);
+}
+
+
+// Converts the letter c to upper case, if possible.
+inline int toUpperCase(int c)
+{
+  return toupper (c);
+}
+
+#endif
\ No newline at end of file
diff --git a/test/ardmake/hardware/cores/arduino/WConstants.h b/test/ardmake/hardware/cores/arduino/WConstants.h
new file mode 100644
index 0000000..3e19ac4
--- /dev/null
+++ b/test/ardmake/hardware/cores/arduino/WConstants.h
@@ -0,0 +1 @@
+#include "wiring.h"
diff --git a/test/ardmake/hardware/cores/arduino/WInterrupts.c b/test/ardmake/hardware/cores/arduino/WInterrupts.c
new file mode 100644
index 0000000..3b3e0c9
--- /dev/null
+++ b/test/ardmake/hardware/cores/arduino/WInterrupts.c
@@ -0,0 +1,249 @@
+/* -*- mode: jde; c-basic-offset: 2; indent-tabs-mode: nil -*- */
+
+/*
+  Part of the Wiring project - http://wiring.uniandes.edu.co
+
+  Copyright (c) 2004-05 Hernando Barragan
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+  Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General
+  Public License along with this library; if not, write to the
+  Free Software Foundation, Inc., 59 Temple Place, Suite 330,
+  Boston, MA  02111-1307  USA
+  
+  Modified 24 November 2006 by David A. Mellis
+  Modified 1 August 2010 by Mark Sproul
+*/
+
+#include <inttypes.h>
+#include <avr/io.h>
+#include <avr/interrupt.h>
+#include <avr/pgmspace.h>
+#include <stdio.h>
+
+#include "WConstants.h"
+#include "wiring_private.h"
+
+volatile static voidFuncPtr intFunc[EXTERNAL_NUM_INTERRUPTS];
+// volatile static voidFuncPtr twiIntFunc;
+
+void attachInterrupt(uint8_t interruptNum, void (*userFunc)(void), int mode) {
+  if(interruptNum < EXTERNAL_NUM_INTERRUPTS) {
+    intFunc[interruptNum] = userFunc;
+    
+    // Configure the interrupt mode (trigger on low input, any change, rising
+    // edge, or falling edge).  The mode constants were chosen to correspond
+    // to the configuration bits in the hardware register, so we simply shift
+    // the mode into place.
+      
+    // Enable the interrupt.
+      
+    switch (interruptNum) {
+#if defined(EICRA) && defined(EICRB) && defined(EIMSK)
+    case 2:
+      EICRA = (EICRA & ~((1 << ISC00) | (1 << ISC01))) | (mode << ISC00);
+      EIMSK |= (1 << INT0);
+      break;
+    case 3:
+      EICRA = (EICRA & ~((1 << ISC10) | (1 << ISC11))) | (mode << ISC10);
+      EIMSK |= (1 << INT1);
+      break;
+    case 4:
+      EICRA = (EICRA & ~((1 << ISC20) | (1 << ISC21))) | (mode << ISC20);
+      EIMSK |= (1 << INT2);
+      break;
+    case 5:
+      EICRA = (EICRA & ~((1 << ISC30) | (1 << ISC31))) | (mode << ISC30);
+      EIMSK |= (1 << INT3);
+      break;
+    case 0:
+      EICRB = (EICRB & ~((1 << ISC40) | (1 << ISC41))) | (mode << ISC40);
+      EIMSK |= (1 << INT4);
+      break;
+    case 1:
+      EICRB = (EICRB & ~((1 << ISC50) | (1 << ISC51))) | (mode << ISC50);
+      EIMSK |= (1 << INT5);
+      break;
+    case 6:
+      EICRB = (EICRB & ~((1 << ISC60) | (1 << ISC61))) | (mode << ISC60);
+      EIMSK |= (1 << INT6);
+      break;
+    case 7:
+      EICRB = (EICRB & ~((1 << ISC70) | (1 << ISC71))) | (mode << ISC70);
+      EIMSK |= (1 << INT7);
+      break;
+#else
+    case 0:
+    #if defined(EICRA) && defined(ISC00) && defined(EIMSK)
+      EICRA = (EICRA & ~((1 << ISC00) | (1 << ISC01))) | (mode << ISC00);
+      EIMSK |= (1 << INT0);
+    #elif defined(MCUCR) && defined(ISC00) && defined(GICR)
+      MCUCR = (MCUCR & ~((1 << ISC00) | (1 << ISC01))) | (mode << ISC00);
+      GICR |= (1 << INT0);
+    #elif defined(MCUCR) && defined(ISC00) && defined(GIMSK)
+      MCUCR = (MCUCR & ~((1 << ISC00) | (1 << ISC01))) | (mode << ISC00);
+      GIMSK |= (1 << INT0);
+    #else
+      #error attachInterrupt not finished for this CPU (case 0)
+    #endif
+      break;
+
+    case 1:
+    #if defined(EICRA) && defined(ISC10) && defined(ISC11) && defined(EIMSK)
+      EICRA = (EICRA & ~((1 << ISC10) | (1 << ISC11))) | (mode << ISC10);
+      EIMSK |= (1 << INT1);
+    #elif defined(MCUCR) && defined(ISC10) && defined(ISC11) && defined(GICR)
+      MCUCR = (MCUCR & ~((1 << ISC10) | (1 << ISC11))) | (mode << ISC10);
+      GICR |= (1 << INT1);
+    #elif defined(MCUCR) && defined(ISC10) && defined(GIMSK) && defined(GIMSK)
+      MCUCR = (MCUCR & ~((1 << ISC10) | (1 << ISC11))) | (mode << ISC10);
+      GIMSK |= (1 << INT1);
+    #else
+      #warning attachInterrupt may need some more work for this cpu (case 1)
+    #endif
+      break;
+#endif
+    }
+  }
+}
+
+void detachInterrupt(uint8_t interruptNum) {
+  if(interruptNum < EXTERNAL_NUM_INTERRUPTS) {
+    // Disable the interrupt.  (We can't assume that interruptNum is equal
+    // to the number of the EIMSK bit to clear, as this isn't true on the 
+    // ATmega8.  There, INT0 is 6 and INT1 is 7.)
+    switch (interruptNum) {
+#if defined(EICRA) && defined(EICRB) && defined(EIMSK)
+    case 2:
+      EIMSK &= ~(1 << INT0);
+      break;
+    case 3:
+      EIMSK &= ~(1 << INT1);
+      break;
+    case 4:
+      EIMSK &= ~(1 << INT2);
+      break;
+    case 5:
+      EIMSK &= ~(1 << INT3);
+      break;
+    case 0:
+      EIMSK &= ~(1 << INT4);
+      break;
+    case 1:
+      EIMSK &= ~(1 << INT5);
+      break;
+    case 6:
+      EIMSK &= ~(1 << INT6);
+      break;
+    case 7:
+      EIMSK &= ~(1 << INT7);
+      break;
+#else
+    case 0:
+    #if defined(EIMSK) && defined(INT0)
+      EIMSK &= ~(1 << INT0);
+    #elif defined(GICR) && defined(ISC00)
+      GICR &= ~(1 << INT0); // atmega32
+    #elif defined(GIMSK) && defined(INT0)
+      GIMSK &= ~(1 << INT0);
+    #else
+      #error detachInterrupt not finished for this cpu
+    #endif
+      break;
+
+    case 1:
+    #if defined(EIMSK) && defined(INT1)
+      EIMSK &= ~(1 << INT1);
+    #elif defined(GICR) && defined(INT1)
+      GICR &= ~(1 << INT1); // atmega32
+    #elif defined(GIMSK) && defined(INT1)
+      GIMSK &= ~(1 << INT1);
+    #else
+      #warning detachInterrupt may need some more work for this cpu (case 1)
+    #endif
+      break;
+#endif
+    }
+      
+    intFunc[interruptNum] = 0;
+  }
+}
+
+/*
+void attachInterruptTwi(void (*userFunc)(void) ) {
+  twiIntFunc = userFunc;
+}
+*/
+
+#if defined(EICRA) && defined(EICRB)
+
+SIGNAL(INT0_vect) {
+  if(intFunc[EXTERNAL_INT_2])
+    intFunc[EXTERNAL_INT_2]();
+}
+
+SIGNAL(INT1_vect) {
+  if(intFunc[EXTERNAL_INT_3])
+    intFunc[EXTERNAL_INT_3]();
+}
+
+SIGNAL(INT2_vect) {
+  if(intFunc[EXTERNAL_INT_4])
+    intFunc[EXTERNAL_INT_4]();
+}
+
+SIGNAL(INT3_vect) {
+  if(intFunc[EXTERNAL_INT_5])
+    intFunc[EXTERNAL_INT_5]();
+}
+
+SIGNAL(INT4_vect) {
+  if(intFunc[EXTERNAL_INT_0])
+    intFunc[EXTERNAL_INT_0]();
+}
+
+SIGNAL(INT5_vect) {
+  if(intFunc[EXTERNAL_INT_1])
+    intFunc[EXTERNAL_INT_1]();
+}
+
+SIGNAL(INT6_vect) {
+  if(intFunc[EXTERNAL_INT_6])
+    intFunc[EXTERNAL_INT_6]();
+}
+
+SIGNAL(INT7_vect) {
+  if(intFunc[EXTERNAL_INT_7])
+    intFunc[EXTERNAL_INT_7]();
+}
+
+#else
+
+SIGNAL(INT0_vect) {
+  if(intFunc[EXTERNAL_INT_0])
+    intFunc[EXTERNAL_INT_0]();
+}
+
+SIGNAL(INT1_vect) {
+  if(intFunc[EXTERNAL_INT_1])
+    intFunc[EXTERNAL_INT_1]();
+}
+
+#endif
+
+/*
+SIGNAL(SIG_2WIRE_SERIAL) {
+  if(twiIntFunc)
+    twiIntFunc();
+}
+*/
+
diff --git a/test/ardmake/hardware/cores/arduino/WInterrupts.d b/test/ardmake/hardware/cores/arduino/WInterrupts.d
new file mode 100644
index 0000000..73a0256
--- /dev/null
+++ b/test/ardmake/hardware/cores/arduino/WInterrupts.d
@@ -0,0 +1,24 @@
+ardmake/hardware/cores/arduino/WInterrupts.o ardmake/hardware/cores/arduino/WInterrupts.d: ardmake/hardware/cores/arduino/WInterrupts.c \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/inttypes.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/stdint.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/io.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/sfr_defs.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/iom328p.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/portpins.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/common.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/version.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/fuse.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/lock.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/interrupt.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/pgmspace.h \
+  /usr/lib/gcc/avr/4.3.5/include/stddef.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/stdio.h \
+  /usr/lib/gcc/avr/4.3.5/include/stdarg.h \
+  ardmake/hardware/cores/arduino/WConstants.h \
+  ardmake/hardware/cores/arduino/wiring.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/stdlib.h \
+  ardmake/hardware/cores/arduino/binary.h \
+  ardmake/hardware/cores/arduino/wiring_private.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/delay.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/util/delay.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/util/delay_basic.h
diff --git a/test/ardmake/hardware/cores/arduino/WMath.cpp b/test/ardmake/hardware/cores/arduino/WMath.cpp
new file mode 100644
index 0000000..2120c4c
--- /dev/null
+++ b/test/ardmake/hardware/cores/arduino/WMath.cpp
@@ -0,0 +1,60 @@
+/* -*- mode: jde; c-basic-offset: 2; indent-tabs-mode: nil -*- */
+
+/*
+  Part of the Wiring project - http://wiring.org.co
+  Copyright (c) 2004-06 Hernando Barragan
+  Modified 13 August 2006, David A. Mellis for Arduino - http://www.arduino.cc/
+  
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+  Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General
+  Public License along with this library; if not, write to the
+  Free Software Foundation, Inc., 59 Temple Place, Suite 330,
+  Boston, MA  02111-1307  USA
+  
+  $Id$
+*/
+
+extern "C" {
+  #include "stdlib.h"
+}
+
+void randomSeed(unsigned int seed)
+{
+  if (seed != 0) {
+    srandom(seed);
+  }
+}
+
+long random(long howbig)
+{
+  if (howbig == 0) {
+    return 0;
+  }
+  return random() % howbig;
+}
+
+long random(long howsmall, long howbig)
+{
+  if (howsmall >= howbig) {
+    return howsmall;
+  }
+  long diff = howbig - howsmall;
+  return random(diff) + howsmall;
+}
+
+long map(long x, long in_min, long in_max, long out_min, long out_max)
+{
+  return (x - in_min) * (out_max - out_min) / (in_max - in_min) + out_min;
+}
+
+unsigned int makeWord(unsigned int w) { return w; }
+unsigned int makeWord(unsigned char h, unsigned char l) { return (h << 8) | l; }
\ No newline at end of file
diff --git a/test/ardmake/hardware/cores/arduino/WMath.d b/test/ardmake/hardware/cores/arduino/WMath.d
new file mode 100644
index 0000000..dd4d873
--- /dev/null
+++ b/test/ardmake/hardware/cores/arduino/WMath.d
@@ -0,0 +1,3 @@
+ardmake/hardware/cores/arduino/WMath.o ardmake/hardware/cores/arduino/WMath.d: ardmake/hardware/cores/arduino/WMath.cpp \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/stdlib.h \
+  /usr/lib/gcc/avr/4.3.5/include/stddef.h
diff --git a/test/ardmake/hardware/cores/arduino/WProgram.h b/test/ardmake/hardware/cores/arduino/WProgram.h
new file mode 100644
index 0000000..f73e760
--- /dev/null
+++ b/test/ardmake/hardware/cores/arduino/WProgram.h
@@ -0,0 +1,63 @@
+#ifndef WProgram_h
+#define WProgram_h
+
+#include <stdlib.h>
+#include <string.h>
+#include <math.h>
+
+#include <avr/interrupt.h>
+
+#include "wiring.h"
+
+#ifdef __cplusplus
+#include "WCharacter.h"
+#include "WString.h"
+#include "HardwareSerial.h"
+
+uint16_t makeWord(uint16_t w);
+uint16_t makeWord(byte h, byte l);
+
+#define word(...) makeWord(__VA_ARGS__)
+
+unsigned long pulseIn(uint8_t pin, uint8_t state, unsigned long timeout = 1000000L);
+
+void tone(uint8_t _pin, unsigned int frequency, unsigned long duration = 0);
+void noTone(uint8_t _pin);
+
+// WMath prototypes
+long random(long);
+long random(long, long);
+void randomSeed(unsigned int);
+long map(long, long, long, long, long);
+
+#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
+const static uint8_t A0 = 54;
+const static uint8_t A1 = 55;
+const static uint8_t A2 = 56;
+const static uint8_t A3 = 57;
+const static uint8_t A4 = 58;
+const static uint8_t A5 = 59;
+const static uint8_t A6 = 60;
+const static uint8_t A7 = 61;
+const static uint8_t A8 = 62;
+const static uint8_t A9 = 63;
+const static uint8_t A10 = 64;
+const static uint8_t A11 = 65;
+const static uint8_t A12 = 66;
+const static uint8_t A13 = 67;
+const static uint8_t A14 = 68;
+const static uint8_t A15 = 69;
+#else
+const static uint8_t A0 = 14;
+const static uint8_t A1 = 15;
+const static uint8_t A2 = 16;
+const static uint8_t A3 = 17;
+const static uint8_t A4 = 18;
+const static uint8_t A5 = 19;
+const static uint8_t A6 = 20;
+const static uint8_t A7 = 21;
+#endif
+
+#endif
+
+#endif
\ No newline at end of file
diff --git a/test/ardmake/hardware/cores/arduino/WString.cpp b/test/ardmake/hardware/cores/arduino/WString.cpp
new file mode 100644
index 0000000..db5a441
--- /dev/null
+++ b/test/ardmake/hardware/cores/arduino/WString.cpp
@@ -0,0 +1,443 @@
+/*
+  WString.cpp - String library for Wiring & Arduino
+  Copyright (c) 2009-10 Hernando Barragan.  All rights reserved.
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+  Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#include <stdlib.h>
+#include "WProgram.h"
+#include "WString.h"
+
+
+String::String( const char *value )
+{
+  if ( value == NULL )
+    value = "";
+  getBuffer( _length = strlen( value ) );
+  if ( _buffer != NULL )
+    strcpy( _buffer, value );
+}
+
+String::String( const String &value )
+{
+  getBuffer( _length = value._length );
+  if ( _buffer != NULL )
+    strcpy( _buffer, value._buffer );
+}
+
+String::String( const char value )
+{
+  _length = 1;
+  getBuffer(1);
+  if ( _buffer != NULL ) {
+    _buffer[0] = value;
+    _buffer[1] = 0;
+  }
+}
+
+String::String( const unsigned char value )
+{
+  _length = 1;
+  getBuffer(1);
+  if ( _buffer != NULL) {
+    _buffer[0] = value;
+    _buffer[1] = 0;
+  }
+}
+
+String::String( const int value, const int base )
+{
+  char buf[33];   
+  itoa((signed long)value, buf, base);
+  getBuffer( _length = strlen(buf) );
+  if ( _buffer != NULL )
+    strcpy( _buffer, buf );
+}
+
+String::String( const unsigned int value, const int base )
+{
+  char buf[33];   
+  ultoa((unsigned long)value, buf, base);
+  getBuffer( _length = strlen(buf) );
+  if ( _buffer != NULL )
+    strcpy( _buffer, buf );
+}
+
+String::String( const long value, const int base )
+{
+  char buf[33];   
+  ltoa(value, buf, base);
+  getBuffer( _length = strlen(buf) );
+  if ( _buffer != NULL )
+    strcpy( _buffer, buf );
+}
+
+String::String( const unsigned long value, const int base )
+{
+  char buf[33];   
+  ultoa(value, buf, 10);
+  getBuffer( _length = strlen(buf) );
+  if ( _buffer != NULL )
+    strcpy( _buffer, buf );
+}
+
+char String::charAt( unsigned int loc ) const
+{
+  return operator[]( loc );
+}
+
+void String::setCharAt( unsigned int loc, const char aChar ) 
+{
+  if(_buffer == NULL) return;
+  if(_length > loc) {
+    _buffer[loc] = aChar;
+  }
+}
+
+int String::compareTo( const String &s2 ) const
+{
+  return strcmp( _buffer, s2._buffer );
+}
+
+const String & String::concat( const String &s2 )
+{
+  return (*this) += s2;
+}
+
+const String & String::operator=( const String &rhs )
+{
+  if ( this == &rhs )
+    return *this;
+
+  if ( rhs._length > _length )
+  {
+    free(_buffer);
+    getBuffer( rhs._length );
+  }
+  
+  if ( _buffer != NULL ) {
+    _length = rhs._length;
+    strcpy( _buffer, rhs._buffer );
+  }
+  return *this;
+}
+
+//const String & String::operator+=( const char aChar )
+//{
+//  if ( _length == _capacity )
+//    doubleBuffer();
+//
+//  _buffer[ _length++ ] = aChar;
+//  _buffer[ _length ] = '\0';
+//  return *this;
+//}
+
+const String & String::operator+=( const String &other )
+{
+  _length += other._length;
+  if ( _length > _capacity )
+  {
+    char *temp = (char *)realloc(_buffer, _length + 1);
+    if ( temp != NULL ) {
+      _buffer = temp;
+      _capacity = _length;
+    } else {
+      _length -= other._length;
+      return *this;
+    }
+  }
+  strcat( _buffer, other._buffer );
+  return *this;
+}
+
+
+int String::operator==( const String &rhs ) const
+{
+  return ( _length == rhs._length && strcmp( _buffer, rhs._buffer ) == 0 );
+}
+
+int String::operator!=( const String &rhs ) const
+{
+  return ( _length != rhs.length() || strcmp( _buffer, rhs._buffer ) != 0 );
+}
+
+int String::operator<( const String &rhs ) const
+{
+  return strcmp( _buffer, rhs._buffer ) < 0;
+}
+
+int String::operator>( const String &rhs ) const
+{
+  return strcmp( _buffer, rhs._buffer ) > 0;
+}
+
+int String::operator<=( const String &rhs ) const
+{
+  return strcmp( _buffer, rhs._buffer ) <= 0;
+}
+
+int String::operator>=( const String & rhs ) const
+{
+  return strcmp( _buffer, rhs._buffer ) >= 0;
+}
+
+char & String::operator[]( unsigned int index )
+{
+  static char dummy_writable_char;
+  if (index >= _length || !_buffer) {
+    dummy_writable_char = 0;
+    return dummy_writable_char;
+  }
+  return _buffer[ index ];
+}
+
+char String::operator[]( unsigned int index ) const
+{
+  // need to check for valid index, to do later
+  return _buffer[ index ];
+}
+
+boolean String::endsWith( const String &s2 ) const
+{
+  if ( _length < s2._length )
+    return 0;
+
+  return strcmp( &_buffer[ _length - s2._length], s2._buffer ) == 0;
+}
+
+boolean String::equals( const String &s2 ) const
+{
+  return ( _length == s2._length && strcmp( _buffer,s2._buffer ) == 0 );
+}
+
+boolean String::equalsIgnoreCase( const String &s2 ) const
+{
+  if ( this == &s2 )
+    return true; //1;
+  else if ( _length != s2._length )
+    return false; //0;
+
+  return strcmp(toLowerCase()._buffer, s2.toLowerCase()._buffer) == 0;
+}
+
+String String::replace( char findChar, char replaceChar )
+{
+  if ( _buffer == NULL ) return *this;
+  String theReturn = _buffer;
+  char* temp = theReturn._buffer;
+  while( (temp = strchr( temp, findChar )) != 0 )
+    *temp = replaceChar;
+
+  return theReturn;
+}
+
+String String::replace( const String& match, const String& replace )
+{
+  if ( _buffer == NULL ) return *this;
+  String temp = _buffer, newString;
+
+  int loc;
+  while ( (loc = temp.indexOf( match )) != -1 )
+  {
+    newString += temp.substring( 0, loc );
+    newString += replace;
+    temp = temp.substring( loc + match._length );
+  }
+  newString += temp;  
+  return newString;
+}
+
+int String::indexOf( char temp ) const
+{
+  return indexOf( temp, 0 );
+}
+
+int String::indexOf( char ch, unsigned int fromIndex ) const
+{
+  if ( fromIndex >= _length )
+    return -1;
+
+  const char* temp = strchr( &_buffer[fromIndex], ch );
+  if ( temp == NULL )
+    return -1;
+
+  return temp - _buffer;
+}
+
+int String::indexOf( const String &s2 ) const
+{
+  return indexOf( s2, 0 );
+}
+
+int String::indexOf( const String &s2, unsigned int fromIndex ) const
+{
+  if ( fromIndex >= _length )
+    return -1;
+
+  const char *theFind = strstr( &_buffer[ fromIndex ], s2._buffer );
+
+  if ( theFind == NULL )
+    return -1;
+
+  return theFind - _buffer; // pointer subtraction
+}
+
+int String::lastIndexOf( char theChar ) const
+{
+  return lastIndexOf( theChar, _length - 1 );
+}
+
+int String::lastIndexOf( char ch, unsigned int fromIndex ) const
+{
+  if ( fromIndex >= _length )
+    return -1;
+
+  char tempchar = _buffer[fromIndex + 1];
+  _buffer[fromIndex + 1] = '\0';
+  char* temp = strrchr( _buffer, ch );
+  _buffer[fromIndex + 1] = tempchar;
+
+  if ( temp == NULL )
+    return -1;
+
+  return temp - _buffer;
+}
+
+int String::lastIndexOf( const String &s2 ) const
+{
+  return lastIndexOf( s2, _length - s2._length );
+}
+
+int String::lastIndexOf( const String &s2, unsigned int fromIndex ) const
+{
+  // check for empty strings
+  if ( s2._length == 0 || s2._length - 1 > fromIndex || fromIndex >= _length )
+    return -1;
+
+  // matching first character
+  char temp = s2[ 0 ];
+
+  for ( int i = fromIndex; i >= 0; i-- )
+  {
+    if ( _buffer[ i ] == temp && (*this).substring( i, i + s2._length ).equals( s2 ) )
+    return i;
+  }
+  return -1;
+}
+
+boolean String::startsWith( const String &s2 ) const
+{
+  if ( _length < s2._length )
+    return 0;
+
+  return startsWith( s2, 0 );
+}
+
+boolean String::startsWith( const String &s2, unsigned int offset ) const
+{
+  if ( offset > _length - s2._length )
+    return 0;
+
+  return strncmp( &_buffer[offset], s2._buffer, s2._length ) == 0;
+}
+
+String String::substring( unsigned int left ) const
+{
+  return substring( left, _length );
+}
+
+String String::substring( unsigned int left, unsigned int right ) const
+{
+  if ( left > right )
+  {
+    int temp = right;
+    right = left;
+    left = temp;
+  }
+
+  if ( right > _length )
+  {
+    right = _length;
+  } 
+
+  char temp = _buffer[ right ];  // save the replaced character
+  _buffer[ right ] = '\0';	
+  String outPut = ( _buffer + left );  // pointer arithmetic
+  _buffer[ right ] = temp;  //restore character
+  return outPut;
+}
+
+String String::toLowerCase() const
+{
+  String temp = _buffer;
+
+  for ( unsigned int i = 0; i < _length; i++ )
+    temp._buffer[ i ] = (char)tolower( temp._buffer[ i ] );
+  return temp;
+}
+
+String String::toUpperCase() const
+{
+  String temp = _buffer;
+
+  for ( unsigned int i = 0; i < _length; i++ )
+    temp._buffer[ i ] = (char)toupper( temp._buffer[ i ] );
+  return temp;
+}
+
+String String::trim() const
+{
+  if ( _buffer == NULL ) return *this;
+  String temp = _buffer;
+  unsigned int i,j;
+
+  for ( i = 0; i < _length; i++ )
+  {
+    if ( !isspace(_buffer[i]) )
+      break;
+  }
+
+  for ( j = temp._length - 1; j > i; j-- )
+  {
+    if ( !isspace(_buffer[j]) )
+      break;
+  }
+
+  return temp.substring( i, j + 1);
+}
+
+void String::getBytes(unsigned char *buf, unsigned int bufsize)
+{
+  if (!bufsize || !buf) return;
+  unsigned int len = bufsize - 1;
+  if (len > _length) len = _length;
+  strncpy((char *)buf, _buffer, len);
+  buf[len] = 0;
+}
+
+void String::toCharArray(char *buf, unsigned int bufsize)
+{
+  if (!bufsize || !buf) return;
+  unsigned int len = bufsize - 1;
+  if (len > _length) len = _length;
+  strncpy(buf, _buffer, len);
+  buf[len] = 0;
+}
+
+
+long String::toInt() {
+  return atol(_buffer);
+}
diff --git a/test/ardmake/hardware/cores/arduino/WString.h b/test/ardmake/hardware/cores/arduino/WString.h
new file mode 100644
index 0000000..cadddb9
--- /dev/null
+++ b/test/ardmake/hardware/cores/arduino/WString.h
@@ -0,0 +1,112 @@
+/*
+  WString.h - String library for Wiring & Arduino
+  Copyright (c) 2009-10 Hernando Barragan.  All right reserved.
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+  Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#ifndef String_h
+#define String_h
+
+//#include "WProgram.h"
+#include <stdlib.h>
+#include <string.h>
+#include <ctype.h>
+
+class String
+{
+  public:
+    // constructors
+    String( const char *value = "" );
+    String( const String &value );
+    String( const char );
+    String( const unsigned char );
+    String( const int, const int base=10);
+    String( const unsigned int, const int base=10 );
+    String( const long, const int base=10 );
+    String( const unsigned long, const int base=10 );
+    ~String() { free(_buffer); _length = _capacity = 0;}     //added _length = _capacity = 0;
+
+    // operators
+    const String & operator = ( const String &rhs );
+    const String & operator +=( const String &rhs );
+    //const String & operator +=( const char );
+    int operator ==( const String &rhs ) const;
+    int	operator !=( const String &rhs ) const;
+    int	operator < ( const String &rhs ) const;
+    int	operator > ( const String &rhs ) const;
+    int	operator <=( const String &rhs ) const;
+    int	operator >=( const String &rhs ) const;
+    char operator []( unsigned int index ) const;
+    char& operator []( unsigned int index );
+    //operator const char *() const { return _buffer; }
+    
+    // general methods
+    char charAt( unsigned int index ) const;
+    int	compareTo( const String &anotherString ) const;
+    unsigned char endsWith( const String &suffix ) const;
+    unsigned char equals( const String &anObject ) const;
+    unsigned char equalsIgnoreCase( const String &anotherString ) const;
+    int	indexOf( char ch ) const;
+    int	indexOf( char ch, unsigned int fromIndex ) const;
+    int	indexOf( const String &str ) const;
+    int	indexOf( const String &str, unsigned int fromIndex ) const;
+    int	lastIndexOf( char ch ) const;
+    int	lastIndexOf( char ch, unsigned int fromIndex ) const;
+    int	lastIndexOf( const String &str ) const;
+    int	lastIndexOf( const String &str, unsigned int fromIndex ) const;
+    const unsigned int length( ) const { return _length; }
+    void setCharAt(unsigned int index, const char ch);
+    unsigned char startsWith( const String &prefix ) const;
+    unsigned char startsWith( const String &prefix, unsigned int toffset ) const;
+    String substring( unsigned int beginIndex ) const;
+    String substring( unsigned int beginIndex, unsigned int endIndex ) const;
+    String toLowerCase( ) const;
+    String toUpperCase( ) const;
+    String trim( ) const;
+    void getBytes(unsigned char *buf, unsigned int bufsize);
+    void toCharArray(char *buf, unsigned int bufsize);
+    long toInt( );
+    const String& concat( const String &str );
+    String replace( char oldChar, char newChar );
+    String replace( const String& match, const String& replace );
+    friend String operator + ( String lhs, const String &rhs );
+
+  protected:
+    char *_buffer;	     // the actual char array
+    unsigned int _capacity;  // the array length minus one (for the '\0')
+    unsigned int _length;    // the String length (not counting the '\0')
+
+    void getBuffer(unsigned int maxStrLen);
+
+  private:
+
+};
+
+// allocate buffer space
+inline void String::getBuffer(unsigned int maxStrLen)
+{
+  _capacity = maxStrLen;
+  _buffer = (char *) malloc(_capacity + 1);
+  if (_buffer == NULL) _length = _capacity = 0;
+}
+
+inline String operator+( String lhs, const String &rhs )
+{
+  return lhs += rhs;
+}
+
+
+#endif
diff --git a/test/ardmake/hardware/cores/arduino/binary.h b/test/ardmake/hardware/cores/arduino/binary.h
new file mode 100644
index 0000000..af14980
--- /dev/null
+++ b/test/ardmake/hardware/cores/arduino/binary.h
@@ -0,0 +1,515 @@
+#ifndef Binary_h
+#define Binary_h
+
+#define B0 0
+#define B00 0
+#define B000 0
+#define B0000 0
+#define B00000 0
+#define B000000 0
+#define B0000000 0
+#define B00000000 0
+#define B1 1
+#define B01 1
+#define B001 1
+#define B0001 1
+#define B00001 1
+#define B000001 1
+#define B0000001 1
+#define B00000001 1
+#define B10 2
+#define B010 2
+#define B0010 2
+#define B00010 2
+#define B000010 2
+#define B0000010 2
+#define B00000010 2
+#define B11 3
+#define B011 3
+#define B0011 3
+#define B00011 3
+#define B000011 3
+#define B0000011 3
+#define B00000011 3
+#define B100 4
+#define B0100 4
+#define B00100 4
+#define B000100 4
+#define B0000100 4
+#define B00000100 4
+#define B101 5
+#define B0101 5
+#define B00101 5
+#define B000101 5
+#define B0000101 5
+#define B00000101 5
+#define B110 6
+#define B0110 6
+#define B00110 6
+#define B000110 6
+#define B0000110 6
+#define B00000110 6
+#define B111 7
+#define B0111 7
+#define B00111 7
+#define B000111 7
+#define B0000111 7
+#define B00000111 7
+#define B1000 8
+#define B01000 8
+#define B001000 8
+#define B0001000 8
+#define B00001000 8
+#define B1001 9
+#define B01001 9
+#define B001001 9
+#define B0001001 9
+#define B00001001 9
+#define B1010 10
+#define B01010 10
+#define B001010 10
+#define B0001010 10
+#define B00001010 10
+#define B1011 11
+#define B01011 11
+#define B001011 11
+#define B0001011 11
+#define B00001011 11
+#define B1100 12
+#define B01100 12
+#define B001100 12
+#define B0001100 12
+#define B00001100 12
+#define B1101 13
+#define B01101 13
+#define B001101 13
+#define B0001101 13
+#define B00001101 13
+#define B1110 14
+#define B01110 14
+#define B001110 14
+#define B0001110 14
+#define B00001110 14
+#define B1111 15
+#define B01111 15
+#define B001111 15
+#define B0001111 15
+#define B00001111 15
+#define B10000 16
+#define B010000 16
+#define B0010000 16
+#define B00010000 16
+#define B10001 17
+#define B010001 17
+#define B0010001 17
+#define B00010001 17
+#define B10010 18
+#define B010010 18
+#define B0010010 18
+#define B00010010 18
+#define B10011 19
+#define B010011 19
+#define B0010011 19
+#define B00010011 19
+#define B10100 20
+#define B010100 20
+#define B0010100 20
+#define B00010100 20
+#define B10101 21
+#define B010101 21
+#define B0010101 21
+#define B00010101 21
+#define B10110 22
+#define B010110 22
+#define B0010110 22
+#define B00010110 22
+#define B10111 23
+#define B010111 23
+#define B0010111 23
+#define B00010111 23
+#define B11000 24
+#define B011000 24
+#define B0011000 24
+#define B00011000 24
+#define B11001 25
+#define B011001 25
+#define B0011001 25
+#define B00011001 25
+#define B11010 26
+#define B011010 26
+#define B0011010 26
+#define B00011010 26
+#define B11011 27
+#define B011011 27
+#define B0011011 27
+#define B00011011 27
+#define B11100 28
+#define B011100 28
+#define B0011100 28
+#define B00011100 28
+#define B11101 29
+#define B011101 29
+#define B0011101 29
+#define B00011101 29
+#define B11110 30
+#define B011110 30
+#define B0011110 30
+#define B00011110 30
+#define B11111 31
+#define B011111 31
+#define B0011111 31
+#define B00011111 31
+#define B100000 32
+#define B0100000 32
+#define B00100000 32
+#define B100001 33
+#define B0100001 33
+#define B00100001 33
+#define B100010 34
+#define B0100010 34
+#define B00100010 34
+#define B100011 35
+#define B0100011 35
+#define B00100011 35
+#define B100100 36
+#define B0100100 36
+#define B00100100 36
+#define B100101 37
+#define B0100101 37
+#define B00100101 37
+#define B100110 38
+#define B0100110 38
+#define B00100110 38
+#define B100111 39
+#define B0100111 39
+#define B00100111 39
+#define B101000 40
+#define B0101000 40
+#define B00101000 40
+#define B101001 41
+#define B0101001 41
+#define B00101001 41
+#define B101010 42
+#define B0101010 42
+#define B00101010 42
+#define B101011 43
+#define B0101011 43
+#define B00101011 43
+#define B101100 44
+#define B0101100 44
+#define B00101100 44
+#define B101101 45
+#define B0101101 45
+#define B00101101 45
+#define B101110 46
+#define B0101110 46
+#define B00101110 46
+#define B101111 47
+#define B0101111 47
+#define B00101111 47
+#define B110000 48
+#define B0110000 48
+#define B00110000 48
+#define B110001 49
+#define B0110001 49
+#define B00110001 49
+#define B110010 50
+#define B0110010 50
+#define B00110010 50
+#define B110011 51
+#define B0110011 51
+#define B00110011 51
+#define B110100 52
+#define B0110100 52
+#define B00110100 52
+#define B110101 53
+#define B0110101 53
+#define B00110101 53
+#define B110110 54
+#define B0110110 54
+#define B00110110 54
+#define B110111 55
+#define B0110111 55
+#define B00110111 55
+#define B111000 56
+#define B0111000 56
+#define B00111000 56
+#define B111001 57
+#define B0111001 57
+#define B00111001 57
+#define B111010 58
+#define B0111010 58
+#define B00111010 58
+#define B111011 59
+#define B0111011 59
+#define B00111011 59
+#define B111100 60
+#define B0111100 60
+#define B00111100 60
+#define B111101 61
+#define B0111101 61
+#define B00111101 61
+#define B111110 62
+#define B0111110 62
+#define B00111110 62
+#define B111111 63
+#define B0111111 63
+#define B00111111 63
+#define B1000000 64
+#define B01000000 64
+#define B1000001 65
+#define B01000001 65
+#define B1000010 66
+#define B01000010 66
+#define B1000011 67
+#define B01000011 67
+#define B1000100 68
+#define B01000100 68
+#define B1000101 69
+#define B01000101 69
+#define B1000110 70
+#define B01000110 70
+#define B1000111 71
+#define B01000111 71
+#define B1001000 72
+#define B01001000 72
+#define B1001001 73
+#define B01001001 73
+#define B1001010 74
+#define B01001010 74
+#define B1001011 75
+#define B01001011 75
+#define B1001100 76
+#define B01001100 76
+#define B1001101 77
+#define B01001101 77
+#define B1001110 78
+#define B01001110 78
+#define B1001111 79
+#define B01001111 79
+#define B1010000 80
+#define B01010000 80
+#define B1010001 81
+#define B01010001 81
+#define B1010010 82
+#define B01010010 82
+#define B1010011 83
+#define B01010011 83
+#define B1010100 84
+#define B01010100 84
+#define B1010101 85
+#define B01010101 85
+#define B1010110 86
+#define B01010110 86
+#define B1010111 87
+#define B01010111 87
+#define B1011000 88
+#define B01011000 88
+#define B1011001 89
+#define B01011001 89
+#define B1011010 90
+#define B01011010 90
+#define B1011011 91
+#define B01011011 91
+#define B1011100 92
+#define B01011100 92
+#define B1011101 93
+#define B01011101 93
+#define B1011110 94
+#define B01011110 94
+#define B1011111 95
+#define B01011111 95
+#define B1100000 96
+#define B01100000 96
+#define B1100001 97
+#define B01100001 97
+#define B1100010 98
+#define B01100010 98
+#define B1100011 99
+#define B01100011 99
+#define B1100100 100
+#define B01100100 100
+#define B1100101 101
+#define B01100101 101
+#define B1100110 102
+#define B01100110 102
+#define B1100111 103
+#define B01100111 103
+#define B1101000 104
+#define B01101000 104
+#define B1101001 105
+#define B01101001 105
+#define B1101010 106
+#define B01101010 106
+#define B1101011 107
+#define B01101011 107
+#define B1101100 108
+#define B01101100 108
+#define B1101101 109
+#define B01101101 109
+#define B1101110 110
+#define B01101110 110
+#define B1101111 111
+#define B01101111 111
+#define B1110000 112
+#define B01110000 112
+#define B1110001 113
+#define B01110001 113
+#define B1110010 114
+#define B01110010 114
+#define B1110011 115
+#define B01110011 115
+#define B1110100 116
+#define B01110100 116
+#define B1110101 117
+#define B01110101 117
+#define B1110110 118
+#define B01110110 118
+#define B1110111 119
+#define B01110111 119
+#define B1111000 120
+#define B01111000 120
+#define B1111001 121
+#define B01111001 121
+#define B1111010 122
+#define B01111010 122
+#define B1111011 123
+#define B01111011 123
+#define B1111100 124
+#define B01111100 124
+#define B1111101 125
+#define B01111101 125
+#define B1111110 126
+#define B01111110 126
+#define B1111111 127
+#define B01111111 127
+#define B10000000 128
+#define B10000001 129
+#define B10000010 130
+#define B10000011 131
+#define B10000100 132
+#define B10000101 133
+#define B10000110 134
+#define B10000111 135
+#define B10001000 136
+#define B10001001 137
+#define B10001010 138
+#define B10001011 139
+#define B10001100 140
+#define B10001101 141
+#define B10001110 142
+#define B10001111 143
+#define B10010000 144
+#define B10010001 145
+#define B10010010 146
+#define B10010011 147
+#define B10010100 148
+#define B10010101 149
+#define B10010110 150
+#define B10010111 151
+#define B10011000 152
+#define B10011001 153
+#define B10011010 154
+#define B10011011 155
+#define B10011100 156
+#define B10011101 157
+#define B10011110 158
+#define B10011111 159
+#define B10100000 160
+#define B10100001 161
+#define B10100010 162
+#define B10100011 163
+#define B10100100 164
+#define B10100101 165
+#define B10100110 166
+#define B10100111 167
+#define B10101000 168
+#define B10101001 169
+#define B10101010 170
+#define B10101011 171
+#define B10101100 172
+#define B10101101 173
+#define B10101110 174
+#define B10101111 175
+#define B10110000 176
+#define B10110001 177
+#define B10110010 178
+#define B10110011 179
+#define B10110100 180
+#define B10110101 181
+#define B10110110 182
+#define B10110111 183
+#define B10111000 184
+#define B10111001 185
+#define B10111010 186
+#define B10111011 187
+#define B10111100 188
+#define B10111101 189
+#define B10111110 190
+#define B10111111 191
+#define B11000000 192
+#define B11000001 193
+#define B11000010 194
+#define B11000011 195
+#define B11000100 196
+#define B11000101 197
+#define B11000110 198
+#define B11000111 199
+#define B11001000 200
+#define B11001001 201
+#define B11001010 202
+#define B11001011 203
+#define B11001100 204
+#define B11001101 205
+#define B11001110 206
+#define B11001111 207
+#define B11010000 208
+#define B11010001 209
+#define B11010010 210
+#define B11010011 211
+#define B11010100 212
+#define B11010101 213
+#define B11010110 214
+#define B11010111 215
+#define B11011000 216
+#define B11011001 217
+#define B11011010 218
+#define B11011011 219
+#define B11011100 220
+#define B11011101 221
+#define B11011110 222
+#define B11011111 223
+#define B11100000 224
+#define B11100001 225
+#define B11100010 226
+#define B11100011 227
+#define B11100100 228
+#define B11100101 229
+#define B11100110 230
+#define B11100111 231
+#define B11101000 232
+#define B11101001 233
+#define B11101010 234
+#define B11101011 235
+#define B11101100 236
+#define B11101101 237
+#define B11101110 238
+#define B11101111 239
+#define B11110000 240
+#define B11110001 241
+#define B11110010 242
+#define B11110011 243
+#define B11110100 244
+#define B11110101 245
+#define B11110110 246
+#define B11110111 247
+#define B11111000 248
+#define B11111001 249
+#define B11111010 250
+#define B11111011 251
+#define B11111100 252
+#define B11111101 253
+#define B11111110 254
+#define B11111111 255
+
+#endif
diff --git a/test/ardmake/hardware/cores/arduino/main.cpp b/test/ardmake/hardware/cores/arduino/main.cpp
new file mode 100644
index 0000000..cc6e81d
--- /dev/null
+++ b/test/ardmake/hardware/cores/arduino/main.cpp
@@ -0,0 +1,14 @@
+#include <WProgram.h>
+
+int main(void)
+{
+	init();
+
+	setup();
+    
+	for (;;)
+		loop();
+        
+	return 0;
+}
+
diff --git a/test/ardmake/hardware/cores/arduino/main.cxx b/test/ardmake/hardware/cores/arduino/main.cxx
new file mode 100644
index 0000000..52351e4
--- /dev/null
+++ b/test/ardmake/hardware/cores/arduino/main.cxx
@@ -0,0 +1,12 @@
+int main(void)
+{
+	init();
+
+	setup();
+    
+	for (;;)
+		loop();
+        
+	return 0;
+}
+
diff --git a/test/ardmake/hardware/cores/arduino/pins_arduino.c b/test/ardmake/hardware/cores/arduino/pins_arduino.c
new file mode 100644
index 0000000..0c816e9
--- /dev/null
+++ b/test/ardmake/hardware/cores/arduino/pins_arduino.c
@@ -0,0 +1,465 @@
+/*
+  pins_arduino.c - pin definitions for the Arduino board
+  Part of Arduino / Wiring Lite
+
+  Copyright (c) 2005 David A. Mellis
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+  Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General
+  Public License along with this library; if not, write to the
+  Free Software Foundation, Inc., 59 Temple Place, Suite 330,
+  Boston, MA  02111-1307  USA
+
+  $Id$
+*/
+
+#include <avr/io.h>
+#include "wiring_private.h"
+#include "pins_arduino.h"
+
+// On the Arduino board, digital pins are also used
+// for the analog output (software PWM).  Analog input
+// pins are a separate set.
+
+// ATMEL ATMEGA8 & 168 / ARDUINO
+//
+//                  +-\/-+
+//            PC6  1|    |28  PC5 (AI 5)
+//      (D 0) PD0  2|    |27  PC4 (AI 4)
+//      (D 1) PD1  3|    |26  PC3 (AI 3)
+//      (D 2) PD2  4|    |25  PC2 (AI 2)
+// PWM+ (D 3) PD3  5|    |24  PC1 (AI 1)
+//      (D 4) PD4  6|    |23  PC0 (AI 0)
+//            VCC  7|    |22  GND
+//            GND  8|    |21  AREF
+//            PB6  9|    |20  AVCC
+//            PB7 10|    |19  PB5 (D 13)
+// PWM+ (D 5) PD5 11|    |18  PB4 (D 12)
+// PWM+ (D 6) PD6 12|    |17  PB3 (D 11) PWM
+//      (D 7) PD7 13|    |16  PB2 (D 10) PWM
+//      (D 8) PB0 14|    |15  PB1 (D 9) PWM
+//                  +----+
+//
+// (PWM+ indicates the additional PWM pins on the ATmega168.)
+
+// ATMEL ATMEGA1280 / ARDUINO
+//
+// 0-7 PE0-PE7   works
+// 8-13 PB0-PB5  works
+// 14-21 PA0-PA7 works 
+// 22-29 PH0-PH7 works
+// 30-35 PG5-PG0 works
+// 36-43 PC7-PC0 works
+// 44-51 PJ7-PJ0 works
+// 52-59 PL7-PL0 works
+// 60-67 PD7-PD0 works
+// A0-A7 PF0-PF7
+// A8-A15 PK0-PK7
+
+#define PA 1
+#define PB 2
+#define PC 3
+#define PD 4
+#define PE 5
+#define PF 6
+#define PG 7
+#define PH 8
+#define PJ 10
+#define PK 11
+#define PL 12
+
+
+#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
+const uint16_t PROGMEM port_to_mode_PGM[] = {
+	NOT_A_PORT,
+	&DDRA,
+	&DDRB,
+	&DDRC,
+	&DDRD,
+	&DDRE,
+	&DDRF,
+	&DDRG,
+	&DDRH,
+	NOT_A_PORT,
+	&DDRJ,
+	&DDRK,
+	&DDRL,
+};
+
+const uint16_t PROGMEM port_to_output_PGM[] = {
+	NOT_A_PORT,
+	&PORTA,
+	&PORTB,
+	&PORTC,
+	&PORTD,
+	&PORTE,
+	&PORTF,
+	&PORTG,
+	&PORTH,
+	NOT_A_PORT,
+	&PORTJ,
+	&PORTK,
+	&PORTL,
+};
+
+const uint16_t PROGMEM port_to_input_PGM[] = {
+	NOT_A_PIN,
+	&PINA,
+	&PINB,
+	&PINC,
+	&PIND,
+	&PINE,
+	&PINF,
+	&PING,
+	&PINH,
+	NOT_A_PIN,
+	&PINJ,
+	&PINK,
+	&PINL,
+};
+
+const uint8_t PROGMEM digital_pin_to_port_PGM[] = {
+	// PORTLIST		
+	// -------------------------------------------		
+	PE	, // PE 0 ** 0 ** USART0_RX	
+	PE	, // PE 1 ** 1 ** USART0_TX	
+	PE	, // PE 4 ** 2 ** PWM2	
+	PE	, // PE 5 ** 3 ** PWM3	
+	PG	, // PG 5 ** 4 ** PWM4	
+	PE	, // PE 3 ** 5 ** PWM5	
+	PH	, // PH 3 ** 6 ** PWM6	
+	PH	, // PH 4 ** 7 ** PWM7	
+	PH	, // PH 5 ** 8 ** PWM8	
+	PH	, // PH 6 ** 9 ** PWM9	
+	PB	, // PB 4 ** 10 ** PWM10	
+	PB	, // PB 5 ** 11 ** PWM11	
+	PB	, // PB 6 ** 12 ** PWM12	
+	PB	, // PB 7 ** 13 ** PWM13	
+	PJ	, // PJ 1 ** 14 ** USART3_TX	
+	PJ	, // PJ 0 ** 15 ** USART3_RX	
+	PH	, // PH 1 ** 16 ** USART2_TX	
+	PH	, // PH 0 ** 17 ** USART2_RX	
+	PD	, // PD 3 ** 18 ** USART1_TX	
+	PD	, // PD 2 ** 19 ** USART1_RX	
+	PD	, // PD 1 ** 20 ** I2C_SDA	
+	PD	, // PD 0 ** 21 ** I2C_SCL	
+	PA	, // PA 0 ** 22 ** D22	
+	PA	, // PA 1 ** 23 ** D23	
+	PA	, // PA 2 ** 24 ** D24	
+	PA	, // PA 3 ** 25 ** D25	
+	PA	, // PA 4 ** 26 ** D26	
+	PA	, // PA 5 ** 27 ** D27	
+	PA	, // PA 6 ** 28 ** D28	
+	PA	, // PA 7 ** 29 ** D29	
+	PC	, // PC 7 ** 30 ** D30	
+	PC	, // PC 6 ** 31 ** D31	
+	PC	, // PC 5 ** 32 ** D32	
+	PC	, // PC 4 ** 33 ** D33	
+	PC	, // PC 3 ** 34 ** D34	
+	PC	, // PC 2 ** 35 ** D35	
+	PC	, // PC 1 ** 36 ** D36	
+	PC	, // PC 0 ** 37 ** D37	
+	PD	, // PD 7 ** 38 ** D38	
+	PG	, // PG 2 ** 39 ** D39	
+	PG	, // PG 1 ** 40 ** D40	
+	PG	, // PG 0 ** 41 ** D41	
+	PL	, // PL 7 ** 42 ** D42	
+	PL	, // PL 6 ** 43 ** D43	
+	PL	, // PL 5 ** 44 ** D44	
+	PL	, // PL 4 ** 45 ** D45	
+	PL	, // PL 3 ** 46 ** D46	
+	PL	, // PL 2 ** 47 ** D47	
+	PL	, // PL 1 ** 48 ** D48	
+	PL	, // PL 0 ** 49 ** D49	
+	PB	, // PB 3 ** 50 ** SPI_MISO	
+	PB	, // PB 2 ** 51 ** SPI_MOSI	
+	PB	, // PB 1 ** 52 ** SPI_SCK	
+	PB	, // PB 0 ** 53 ** SPI_SS	
+	PF	, // PF 0 ** 54 ** A0	
+	PF	, // PF 1 ** 55 ** A1	
+	PF	, // PF 2 ** 56 ** A2	
+	PF	, // PF 3 ** 57 ** A3	
+	PF	, // PF 4 ** 58 ** A4	
+	PF	, // PF 5 ** 59 ** A5	
+	PF	, // PF 6 ** 60 ** A6	
+	PF	, // PF 7 ** 61 ** A7	
+	PK	, // PK 0 ** 62 ** A8	
+	PK	, // PK 1 ** 63 ** A9	
+	PK	, // PK 2 ** 64 ** A10	
+	PK	, // PK 3 ** 65 ** A11	
+	PK	, // PK 4 ** 66 ** A12	
+	PK	, // PK 5 ** 67 ** A13	
+	PK	, // PK 6 ** 68 ** A14	
+	PK	, // PK 7 ** 69 ** A15	
+};
+
+const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = {
+	// PIN IN PORT		
+	// -------------------------------------------		
+	_BV( 0 )	, // PE 0 ** 0 ** USART0_RX	
+	_BV( 1 )	, // PE 1 ** 1 ** USART0_TX	
+	_BV( 4 )	, // PE 4 ** 2 ** PWM2	
+	_BV( 5 )	, // PE 5 ** 3 ** PWM3	
+	_BV( 5 )	, // PG 5 ** 4 ** PWM4	
+	_BV( 3 )	, // PE 3 ** 5 ** PWM5	
+	_BV( 3 )	, // PH 3 ** 6 ** PWM6	
+	_BV( 4 )	, // PH 4 ** 7 ** PWM7	
+	_BV( 5 )	, // PH 5 ** 8 ** PWM8	
+	_BV( 6 )	, // PH 6 ** 9 ** PWM9	
+	_BV( 4 )	, // PB 4 ** 10 ** PWM10	
+	_BV( 5 )	, // PB 5 ** 11 ** PWM11	
+	_BV( 6 )	, // PB 6 ** 12 ** PWM12	
+	_BV( 7 )	, // PB 7 ** 13 ** PWM13	
+	_BV( 1 )	, // PJ 1 ** 14 ** USART3_TX	
+	_BV( 0 )	, // PJ 0 ** 15 ** USART3_RX	
+	_BV( 1 )	, // PH 1 ** 16 ** USART2_TX	
+	_BV( 0 )	, // PH 0 ** 17 ** USART2_RX	
+	_BV( 3 )	, // PD 3 ** 18 ** USART1_TX	
+	_BV( 2 )	, // PD 2 ** 19 ** USART1_RX	
+	_BV( 1 )	, // PD 1 ** 20 ** I2C_SDA	
+	_BV( 0 )	, // PD 0 ** 21 ** I2C_SCL	
+	_BV( 0 )	, // PA 0 ** 22 ** D22	
+	_BV( 1 )	, // PA 1 ** 23 ** D23	
+	_BV( 2 )	, // PA 2 ** 24 ** D24	
+	_BV( 3 )	, // PA 3 ** 25 ** D25	
+	_BV( 4 )	, // PA 4 ** 26 ** D26	
+	_BV( 5 )	, // PA 5 ** 27 ** D27	
+	_BV( 6 )	, // PA 6 ** 28 ** D28	
+	_BV( 7 )	, // PA 7 ** 29 ** D29	
+	_BV( 7 )	, // PC 7 ** 30 ** D30	
+	_BV( 6 )	, // PC 6 ** 31 ** D31	
+	_BV( 5 )	, // PC 5 ** 32 ** D32	
+	_BV( 4 )	, // PC 4 ** 33 ** D33	
+	_BV( 3 )	, // PC 3 ** 34 ** D34	
+	_BV( 2 )	, // PC 2 ** 35 ** D35	
+	_BV( 1 )	, // PC 1 ** 36 ** D36	
+	_BV( 0 )	, // PC 0 ** 37 ** D37	
+	_BV( 7 )	, // PD 7 ** 38 ** D38	
+	_BV( 2 )	, // PG 2 ** 39 ** D39	
+	_BV( 1 )	, // PG 1 ** 40 ** D40	
+	_BV( 0 )	, // PG 0 ** 41 ** D41	
+	_BV( 7 )	, // PL 7 ** 42 ** D42	
+	_BV( 6 )	, // PL 6 ** 43 ** D43	
+	_BV( 5 )	, // PL 5 ** 44 ** D44	
+	_BV( 4 )	, // PL 4 ** 45 ** D45	
+	_BV( 3 )	, // PL 3 ** 46 ** D46	
+	_BV( 2 )	, // PL 2 ** 47 ** D47	
+	_BV( 1 )	, // PL 1 ** 48 ** D48	
+	_BV( 0 )	, // PL 0 ** 49 ** D49	
+	_BV( 3 )	, // PB 3 ** 50 ** SPI_MISO	
+	_BV( 2 )	, // PB 2 ** 51 ** SPI_MOSI	
+	_BV( 1 )	, // PB 1 ** 52 ** SPI_SCK	
+	_BV( 0 )	, // PB 0 ** 53 ** SPI_SS	
+	_BV( 0 )	, // PF 0 ** 54 ** A0	
+	_BV( 1 )	, // PF 1 ** 55 ** A1	
+	_BV( 2 )	, // PF 2 ** 56 ** A2	
+	_BV( 3 )	, // PF 3 ** 57 ** A3	
+	_BV( 4 )	, // PF 4 ** 58 ** A4	
+	_BV( 5 )	, // PF 5 ** 59 ** A5	
+	_BV( 6 )	, // PF 6 ** 60 ** A6	
+	_BV( 7 )	, // PF 7 ** 61 ** A7	
+	_BV( 0 )	, // PK 0 ** 62 ** A8	
+	_BV( 1 )	, // PK 1 ** 63 ** A9	
+	_BV( 2 )	, // PK 2 ** 64 ** A10	
+	_BV( 3 )	, // PK 3 ** 65 ** A11	
+	_BV( 4 )	, // PK 4 ** 66 ** A12	
+	_BV( 5 )	, // PK 5 ** 67 ** A13	
+	_BV( 6 )	, // PK 6 ** 68 ** A14	
+	_BV( 7 )	, // PK 7 ** 69 ** A15	
+};
+
+const uint8_t PROGMEM digital_pin_to_timer_PGM[] = {
+	// TIMERS		
+	// -------------------------------------------		
+	NOT_ON_TIMER	, // PE 0 ** 0 ** USART0_RX	
+	NOT_ON_TIMER	, // PE 1 ** 1 ** USART0_TX	
+	TIMER3B	, // PE 4 ** 2 ** PWM2	
+	TIMER3C	, // PE 5 ** 3 ** PWM3	
+	TIMER0B	, // PG 5 ** 4 ** PWM4	
+	TIMER3A	, // PE 3 ** 5 ** PWM5	
+	TIMER4A	, // PH 3 ** 6 ** PWM6	
+	TIMER4B	, // PH 4 ** 7 ** PWM7	
+	TIMER4C	, // PH 5 ** 8 ** PWM8	
+	TIMER2B	, // PH 6 ** 9 ** PWM9	
+	TIMER2A	, // PB 4 ** 10 ** PWM10	
+	TIMER1A	, // PB 5 ** 11 ** PWM11	
+	TIMER1B	, // PB 6 ** 12 ** PWM12	
+	TIMER0A	, // PB 7 ** 13 ** PWM13	
+	NOT_ON_TIMER	, // PJ 1 ** 14 ** USART3_TX	
+	NOT_ON_TIMER	, // PJ 0 ** 15 ** USART3_RX	
+	NOT_ON_TIMER	, // PH 1 ** 16 ** USART2_TX	
+	NOT_ON_TIMER	, // PH 0 ** 17 ** USART2_RX	
+	NOT_ON_TIMER	, // PD 3 ** 18 ** USART1_TX	
+	NOT_ON_TIMER	, // PD 2 ** 19 ** USART1_RX	
+	NOT_ON_TIMER	, // PD 1 ** 20 ** I2C_SDA	
+	NOT_ON_TIMER	, // PD 0 ** 21 ** I2C_SCL	
+	NOT_ON_TIMER	, // PA 0 ** 22 ** D22	
+	NOT_ON_TIMER	, // PA 1 ** 23 ** D23	
+	NOT_ON_TIMER	, // PA 2 ** 24 ** D24	
+	NOT_ON_TIMER	, // PA 3 ** 25 ** D25	
+	NOT_ON_TIMER	, // PA 4 ** 26 ** D26	
+	NOT_ON_TIMER	, // PA 5 ** 27 ** D27	
+	NOT_ON_TIMER	, // PA 6 ** 28 ** D28	
+	NOT_ON_TIMER	, // PA 7 ** 29 ** D29	
+	NOT_ON_TIMER	, // PC 7 ** 30 ** D30	
+	NOT_ON_TIMER	, // PC 6 ** 31 ** D31	
+	NOT_ON_TIMER	, // PC 5 ** 32 ** D32	
+	NOT_ON_TIMER	, // PC 4 ** 33 ** D33	
+	NOT_ON_TIMER	, // PC 3 ** 34 ** D34	
+	NOT_ON_TIMER	, // PC 2 ** 35 ** D35	
+	NOT_ON_TIMER	, // PC 1 ** 36 ** D36	
+	NOT_ON_TIMER	, // PC 0 ** 37 ** D37	
+	NOT_ON_TIMER	, // PD 7 ** 38 ** D38	
+	NOT_ON_TIMER	, // PG 2 ** 39 ** D39	
+	NOT_ON_TIMER	, // PG 1 ** 40 ** D40	
+	NOT_ON_TIMER	, // PG 0 ** 41 ** D41	
+	NOT_ON_TIMER	, // PL 7 ** 42 ** D42	
+	NOT_ON_TIMER	, // PL 6 ** 43 ** D43	
+	TIMER5C	, // PL 5 ** 44 ** D44	
+	TIMER5B	, // PL 4 ** 45 ** D45	
+	TIMER5A	, // PL 3 ** 46 ** D46	
+	NOT_ON_TIMER	, // PL 2 ** 47 ** D47	
+	NOT_ON_TIMER	, // PL 1 ** 48 ** D48	
+	NOT_ON_TIMER	, // PL 0 ** 49 ** D49	
+	NOT_ON_TIMER	, // PB 3 ** 50 ** SPI_MISO	
+	NOT_ON_TIMER	, // PB 2 ** 51 ** SPI_MOSI	
+	NOT_ON_TIMER	, // PB 1 ** 52 ** SPI_SCK	
+	NOT_ON_TIMER	, // PB 0 ** 53 ** SPI_SS	
+	NOT_ON_TIMER	, // PF 0 ** 54 ** A0	
+	NOT_ON_TIMER	, // PF 1 ** 55 ** A1	
+	NOT_ON_TIMER	, // PF 2 ** 56 ** A2	
+	NOT_ON_TIMER	, // PF 3 ** 57 ** A3	
+	NOT_ON_TIMER	, // PF 4 ** 58 ** A4	
+	NOT_ON_TIMER	, // PF 5 ** 59 ** A5	
+	NOT_ON_TIMER	, // PF 6 ** 60 ** A6	
+	NOT_ON_TIMER	, // PF 7 ** 61 ** A7	
+	NOT_ON_TIMER	, // PK 0 ** 62 ** A8	
+	NOT_ON_TIMER	, // PK 1 ** 63 ** A9	
+	NOT_ON_TIMER	, // PK 2 ** 64 ** A10	
+	NOT_ON_TIMER	, // PK 3 ** 65 ** A11	
+	NOT_ON_TIMER	, // PK 4 ** 66 ** A12	
+	NOT_ON_TIMER	, // PK 5 ** 67 ** A13	
+	NOT_ON_TIMER	, // PK 6 ** 68 ** A14	
+	NOT_ON_TIMER	, // PK 7 ** 69 ** A15	
+};
+#else
+// these arrays map port names (e.g. port B) to the
+// appropriate addresses for various functions (e.g. reading
+// and writing)
+const uint16_t PROGMEM port_to_mode_PGM[] = {
+	NOT_A_PORT,
+	NOT_A_PORT,
+	&DDRB,
+	&DDRC,
+	&DDRD,
+};
+
+const uint16_t PROGMEM port_to_output_PGM[] = {
+	NOT_A_PORT,
+	NOT_A_PORT,
+	&PORTB,
+	&PORTC,
+	&PORTD,
+};
+
+const uint16_t PROGMEM port_to_input_PGM[] = {
+	NOT_A_PORT,
+	NOT_A_PORT,
+	&PINB,
+	&PINC,
+	&PIND,
+};
+
+const uint8_t PROGMEM digital_pin_to_port_PGM[] = {
+	PD, /* 0 */
+	PD,
+	PD,
+	PD,
+	PD,
+	PD,
+	PD,
+	PD,
+	PB, /* 8 */
+	PB,
+	PB,
+	PB,
+	PB,
+	PB,
+	PC, /* 14 */
+	PC,
+	PC,
+	PC,
+	PC,
+	PC,
+};
+
+const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = {
+	_BV(0), /* 0, port D */
+	_BV(1),
+	_BV(2),
+	_BV(3),
+	_BV(4),
+	_BV(5),
+	_BV(6),
+	_BV(7),
+	_BV(0), /* 8, port B */
+	_BV(1),
+	_BV(2),
+	_BV(3),
+	_BV(4),
+	_BV(5),
+	_BV(0), /* 14, port C */
+	_BV(1),
+	_BV(2),
+	_BV(3),
+	_BV(4),
+	_BV(5),
+};
+
+const uint8_t PROGMEM digital_pin_to_timer_PGM[] = {
+	NOT_ON_TIMER, /* 0 - port D */
+	NOT_ON_TIMER,
+	NOT_ON_TIMER,
+	// on the ATmega168, digital pin 3 has hardware pwm
+#if defined(__AVR_ATmega8__)
+	NOT_ON_TIMER,
+#else
+	TIMER2B,
+#endif
+	NOT_ON_TIMER,
+	// on the ATmega168, digital pins 5 and 6 have hardware pwm
+#if defined(__AVR_ATmega8__)
+	NOT_ON_TIMER,
+	NOT_ON_TIMER,
+#else
+	TIMER0B,
+	TIMER0A,
+#endif
+	NOT_ON_TIMER,
+	NOT_ON_TIMER, /* 8 - port B */
+	TIMER1A,
+	TIMER1B,
+#if defined(__AVR_ATmega8__)
+	TIMER2,
+#else
+	TIMER2A,
+#endif
+	NOT_ON_TIMER,
+	NOT_ON_TIMER,
+	NOT_ON_TIMER,
+	NOT_ON_TIMER, /* 14 - port C */
+	NOT_ON_TIMER,
+	NOT_ON_TIMER,
+	NOT_ON_TIMER,
+	NOT_ON_TIMER,
+};
+#endif
diff --git a/test/ardmake/hardware/cores/arduino/pins_arduino.d b/test/ardmake/hardware/cores/arduino/pins_arduino.d
new file mode 100644
index 0000000..aef7639
--- /dev/null
+++ b/test/ardmake/hardware/cores/arduino/pins_arduino.d
@@ -0,0 +1,24 @@
+ardmake/hardware/cores/arduino/pins_arduino.o ardmake/hardware/cores/arduino/pins_arduino.d: ardmake/hardware/cores/arduino/pins_arduino.c \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/io.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/sfr_defs.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/inttypes.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/stdint.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/iom328p.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/portpins.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/common.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/version.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/fuse.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/lock.h \
+  ardmake/hardware/cores/arduino/wiring_private.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/interrupt.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/delay.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/util/delay.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/util/delay_basic.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/stdio.h \
+  /usr/lib/gcc/avr/4.3.5/include/stdarg.h \
+  /usr/lib/gcc/avr/4.3.5/include/stddef.h \
+  ardmake/hardware/cores/arduino/wiring.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/stdlib.h \
+  ardmake/hardware/cores/arduino/binary.h \
+  ardmake/hardware/cores/arduino/pins_arduino.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/pgmspace.h
diff --git a/test/ardmake/hardware/cores/arduino/pins_arduino.h b/test/ardmake/hardware/cores/arduino/pins_arduino.h
new file mode 100644
index 0000000..bc931c5
--- /dev/null
+++ b/test/ardmake/hardware/cores/arduino/pins_arduino.h
@@ -0,0 +1,88 @@
+/*
+  pins_arduino.h - Pin definition functions for Arduino
+  Part of Arduino - http://www.arduino.cc/
+
+  Copyright (c) 2007 David A. Mellis
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+  Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General
+  Public License along with this library; if not, write to the
+  Free Software Foundation, Inc., 59 Temple Place, Suite 330,
+  Boston, MA  02111-1307  USA
+
+  $Id: wiring.h 249 2007-02-03 16:52:51Z mellis $
+*/
+
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <avr/pgmspace.h>
+
+#define NOT_A_PIN 0
+#define NOT_A_PORT 0
+
+#define NOT_ON_TIMER 0
+#define TIMER0A 1
+#define TIMER0B 2
+#define TIMER1A 3
+#define TIMER1B 4
+#define TIMER2  5
+#define TIMER2A 6
+#define TIMER2B 7
+
+#define TIMER3A 8
+#define TIMER3B 9
+#define TIMER3C 10
+#define TIMER4A 11
+#define TIMER4B 12
+#define TIMER4C 13
+#define TIMER5A 14
+#define TIMER5B 15
+#define TIMER5C 16
+
+#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
+const static uint8_t SS   = 53;
+const static uint8_t MOSI = 51;
+const static uint8_t MISO = 50;
+const static uint8_t SCK  = 52;
+#else
+const static uint8_t SS   = 10;
+const static uint8_t MOSI = 11;
+const static uint8_t MISO = 12;
+const static uint8_t SCK  = 13;
+#endif
+
+// On the ATmega1280, the addresses of some of the port registers are
+// greater than 255, so we can't store them in uint8_t's.
+extern const uint16_t PROGMEM port_to_mode_PGM[];
+extern const uint16_t PROGMEM port_to_input_PGM[];
+extern const uint16_t PROGMEM port_to_output_PGM[];
+
+extern const uint8_t PROGMEM digital_pin_to_port_PGM[];
+// extern const uint8_t PROGMEM digital_pin_to_bit_PGM[];
+extern const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[];
+extern const uint8_t PROGMEM digital_pin_to_timer_PGM[];
+
+// Get the bit location within the hardware port of the given virtual pin.
+// This comes from the pins_*.c file for the active board configuration.
+// 
+// These perform slightly better as macros compared to inline functions
+//
+#define digitalPinToPort(P) ( pgm_read_byte( digital_pin_to_port_PGM + (P) ) )
+#define digitalPinToBitMask(P) ( pgm_read_byte( digital_pin_to_bit_mask_PGM + (P) ) )
+#define digitalPinToTimer(P) ( pgm_read_byte( digital_pin_to_timer_PGM + (P) ) )
+#define analogInPinToBit(P) (P)
+#define portOutputRegister(P) ( (volatile uint8_t *)( pgm_read_word( port_to_output_PGM + (P))) )
+#define portInputRegister(P) ( (volatile uint8_t *)( pgm_read_word( port_to_input_PGM + (P))) )
+#define portModeRegister(P) ( (volatile uint8_t *)( pgm_read_word( port_to_mode_PGM + (P))) )
+
+#endif
diff --git a/test/ardmake/hardware/cores/arduino/wiring.c b/test/ardmake/hardware/cores/arduino/wiring.c
new file mode 100644
index 0000000..b90d07e
--- /dev/null
+++ b/test/ardmake/hardware/cores/arduino/wiring.c
@@ -0,0 +1,289 @@
+/*
+  wiring.c - Partial implementation of the Wiring API for the ATmega8.
+  Part of Arduino - http://www.arduino.cc/
+
+  Copyright (c) 2005-2006 David A. Mellis
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+  Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General
+  Public License along with this library; if not, write to the
+  Free Software Foundation, Inc., 59 Temple Place, Suite 330,
+  Boston, MA  02111-1307  USA
+
+  $Id$
+*/
+
+#include "wiring_private.h"
+
+// the prescaler is set so that timer0 ticks every 64 clock cycles, and the
+// the overflow handler is called every 256 ticks.
+#define MICROSECONDS_PER_TIMER0_OVERFLOW (clockCyclesToMicroseconds(64 * 256))
+
+// the whole number of milliseconds per timer0 overflow
+#define MILLIS_INC (MICROSECONDS_PER_TIMER0_OVERFLOW / 1000)
+
+// the fractional number of milliseconds per timer0 overflow. we shift right
+// by three to fit these numbers into a byte. (for the clock speeds we care
+// about - 8 and 16 MHz - this doesn't lose precision.)
+#define FRACT_INC ((MICROSECONDS_PER_TIMER0_OVERFLOW % 1000) >> 3)
+#define FRACT_MAX (1000 >> 3)
+
+volatile unsigned long timer0_overflow_count = 0;
+volatile unsigned long timer0_millis = 0;
+static unsigned char timer0_fract = 0;
+
+SIGNAL(TIMER0_OVF_vect)
+{
+	// copy these to local variables so they can be stored in registers
+	// (volatile variables must be read from memory on every access)
+	unsigned long m = timer0_millis;
+	unsigned char f = timer0_fract;
+
+	m += MILLIS_INC;
+	f += FRACT_INC;
+	if (f >= FRACT_MAX) {
+		f -= FRACT_MAX;
+		m += 1;
+	}
+
+	timer0_fract = f;
+	timer0_millis = m;
+	timer0_overflow_count++;
+}
+
+unsigned long millis()
+{
+	unsigned long m;
+	uint8_t oldSREG = SREG;
+
+	// disable interrupts while we read timer0_millis or we might get an
+	// inconsistent value (e.g. in the middle of a write to timer0_millis)
+	cli();
+	m = timer0_millis;
+	SREG = oldSREG;
+
+	return m;
+}
+
+unsigned long micros() {
+	unsigned long m;
+	uint8_t oldSREG = SREG, t;
+	
+	cli();
+	m = timer0_overflow_count;
+#if defined(TCNT0)
+	t = TCNT0;
+#elif defined(TCNT0L)
+	t = TCNT0L;
+#else
+	#error TIMER 0 not defined
+#endif
+
+  
+#ifdef TIFR0
+	if ((TIFR0 & _BV(TOV0)) && (t < 255))
+		m++;
+#else
+	if ((TIFR & _BV(TOV0)) && (t < 255))
+		m++;
+#endif
+
+	SREG = oldSREG;
+	
+	return ((m << 8) + t) * (64 / clockCyclesPerMicrosecond());
+}
+
+void delay(unsigned long ms)
+{
+	uint16_t start = (uint16_t)micros();
+
+	while (ms > 0) {
+		if (((uint16_t)micros() - start) >= 1000) {
+			ms--;
+			start += 1000;
+		}
+	}
+}
+
+/* Delay for the given number of microseconds.  Assumes a 8 or 16 MHz clock. */
+void delayMicroseconds(unsigned int us)
+{
+	// calling avrlib's delay_us() function with low values (e.g. 1 or
+	// 2 microseconds) gives delays longer than desired.
+	//delay_us(us);
+
+#if F_CPU >= 16000000L
+	// for the 16 MHz clock on most Arduino boards
+
+	// for a one-microsecond delay, simply return.  the overhead
+	// of the function call yields a delay of approximately 1 1/8 us.
+	if (--us == 0)
+		return;
+
+	// the following loop takes a quarter of a microsecond (4 cycles)
+	// per iteration, so execute it four times for each microsecond of
+	// delay requested.
+	us <<= 2;
+
+	// account for the time taken in the preceeding commands.
+	us -= 2;
+#else
+	// for the 8 MHz internal clock on the ATmega168
+
+	// for a one- or two-microsecond delay, simply return.  the overhead of
+	// the function calls takes more than two microseconds.  can't just
+	// subtract two, since us is unsigned; we'd overflow.
+	if (--us == 0)
+		return;
+	if (--us == 0)
+		return;
+
+	// the following loop takes half of a microsecond (4 cycles)
+	// per iteration, so execute it twice for each microsecond of
+	// delay requested.
+	us <<= 1;
+    
+	// partially compensate for the time taken by the preceeding commands.
+	// we can't subtract any more than this or we'd overflow w/ small delays.
+	us--;
+#endif
+
+	// busy wait
+	__asm__ __volatile__ (
+		"1: sbiw %0,1" "\n\t" // 2 cycles
+		"brne 1b" : "=w" (us) : "0" (us) // 2 cycles
+	);
+}
+
+void init()
+{
+	// this needs to be called before setup() or some functions won't
+	// work there
+	sei();
+	
+	// on the ATmega168, timer 0 is also used for fast hardware pwm
+	// (using phase-correct PWM would mean that timer 0 overflowed half as often
+	// resulting in different millis() behavior on the ATmega8 and ATmega168)
+#if defined(TCCR0A) && defined(WGM01)
+	sbi(TCCR0A, WGM01);
+	sbi(TCCR0A, WGM00);
+#endif  
+
+	// set timer 0 prescale factor to 64
+#if defined(__AVR_ATmega128__)
+	// CPU specific: different values for the ATmega128
+	sbi(TCCR0, CS02);
+#elif defined(TCCR0) && defined(CS01) && defined(CS00)
+	// this combination is for the standard atmega8
+	sbi(TCCR0, CS01);
+	sbi(TCCR0, CS00);
+#elif defined(TCCR0B) && defined(CS01) && defined(CS00)
+	// this combination is for the standard 168/328/1280/2560
+	sbi(TCCR0B, CS01);
+	sbi(TCCR0B, CS00);
+#elif defined(TCCR0A) && defined(CS01) && defined(CS00)
+	// this combination is for the __AVR_ATmega645__ series
+	sbi(TCCR0A, CS01);
+	sbi(TCCR0A, CS00);
+#else
+	#error Timer 0 prescale factor 64 not set correctly
+#endif
+
+	// enable timer 0 overflow interrupt
+#if defined(TIMSK) && defined(TOIE0)
+	sbi(TIMSK, TOIE0);
+#elif defined(TIMSK0) && defined(TOIE0)
+	sbi(TIMSK0, TOIE0);
+#else
+	#error	Timer 0 overflow interrupt not set correctly
+#endif
+
+	// timers 1 and 2 are used for phase-correct hardware pwm
+	// this is better for motors as it ensures an even waveform
+	// note, however, that fast pwm mode can achieve a frequency of up
+	// 8 MHz (with a 16 MHz clock) at 50% duty cycle
+
+	TCCR1B = 0;
+
+	// set timer 1 prescale factor to 64
+#if defined(TCCR1B) && defined(CS11) && defined(CS10)
+	sbi(TCCR1B, CS11);
+	sbi(TCCR1B, CS10);
+#elif defined(TCCR1) && defined(CS11) && defined(CS10)
+	sbi(TCCR1, CS11);
+	sbi(TCCR1, CS10);
+#endif
+	// put timer 1 in 8-bit phase correct pwm mode
+#if defined(TCCR1A) && defined(WGM10)
+	sbi(TCCR1A, WGM10);
+#elif defined(TCCR1)
+	#warning this needs to be finished
+#endif
+
+	// set timer 2 prescale factor to 64
+#if defined(TCCR2) && defined(CS22)
+	sbi(TCCR2, CS22);
+#elif defined(TCCR2B) && defined(CS22)
+	sbi(TCCR2B, CS22);
+#else
+	#warning Timer 2 not finished (may not be present on this CPU)
+#endif
+
+	// configure timer 2 for phase correct pwm (8-bit)
+#if defined(TCCR2) && defined(WGM20)
+	sbi(TCCR2, WGM20);
+#elif defined(TCCR2A) && defined(WGM20)
+	sbi(TCCR2A, WGM20);
+#else
+	#warning Timer 2 not finished (may not be present on this CPU)
+#endif
+
+#if defined(TCCR3B) && defined(CS31) && defined(WGM30)
+	sbi(TCCR3B, CS31);		// set timer 3 prescale factor to 64
+	sbi(TCCR3B, CS30);
+	sbi(TCCR3A, WGM30);		// put timer 3 in 8-bit phase correct pwm mode
+#endif
+	
+#if defined(TCCR4B) && defined(CS41) && defined(WGM40)
+	sbi(TCCR4B, CS41);		// set timer 4 prescale factor to 64
+	sbi(TCCR4B, CS40);
+	sbi(TCCR4A, WGM40);		// put timer 4 in 8-bit phase correct pwm mode
+#endif
+
+#if defined(TCCR5B) && defined(CS51) && defined(WGM50)
+	sbi(TCCR5B, CS51);		// set timer 5 prescale factor to 64
+	sbi(TCCR5B, CS50);
+	sbi(TCCR5A, WGM50);		// put timer 5 in 8-bit phase correct pwm mode
+#endif
+
+#if defined(ADCSRA)
+	// set a2d prescale factor to 128
+	// 16 MHz / 128 = 125 KHz, inside the desired 50-200 KHz range.
+	// XXX: this will not work properly for other clock speeds, and
+	// this code should use F_CPU to determine the prescale factor.
+	sbi(ADCSRA, ADPS2);
+	sbi(ADCSRA, ADPS1);
+	sbi(ADCSRA, ADPS0);
+
+	// enable a2d conversions
+	sbi(ADCSRA, ADEN);
+#endif
+
+	// the bootloader connects pins 0 and 1 to the USART; disconnect them
+	// here so they can be used as normal digital i/o; they will be
+	// reconnected in Serial.begin()
+#if defined(UCSRB)
+	UCSRB = 0;
+#elif defined(UCSR0B)
+	UCSR0B = 0;
+#endif
+}
diff --git a/test/ardmake/hardware/cores/arduino/wiring.d b/test/ardmake/hardware/cores/arduino/wiring.d
new file mode 100644
index 0000000..ea1b80f
--- /dev/null
+++ b/test/ardmake/hardware/cores/arduino/wiring.d
@@ -0,0 +1,22 @@
+ardmake/hardware/cores/arduino/wiring.o ardmake/hardware/cores/arduino/wiring.d: ardmake/hardware/cores/arduino/wiring.c \
+  ardmake/hardware/cores/arduino/wiring_private.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/io.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/sfr_defs.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/inttypes.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/stdint.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/iom328p.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/portpins.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/common.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/version.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/fuse.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/lock.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/interrupt.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/delay.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/util/delay.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/util/delay_basic.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/stdio.h \
+  /usr/lib/gcc/avr/4.3.5/include/stdarg.h \
+  /usr/lib/gcc/avr/4.3.5/include/stddef.h \
+  ardmake/hardware/cores/arduino/wiring.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/stdlib.h \
+  ardmake/hardware/cores/arduino/binary.h
diff --git a/test/ardmake/hardware/cores/arduino/wiring.h b/test/ardmake/hardware/cores/arduino/wiring.h
new file mode 100644
index 0000000..e29959b
--- /dev/null
+++ b/test/ardmake/hardware/cores/arduino/wiring.h
@@ -0,0 +1,135 @@
+/*
+  wiring.h - Partial implementation of the Wiring API for the ATmega8.
+  Part of Arduino - http://www.arduino.cc/
+
+  Copyright (c) 2005-2006 David A. Mellis
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+  Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General
+  Public License along with this library; if not, write to the
+  Free Software Foundation, Inc., 59 Temple Place, Suite 330,
+  Boston, MA  02111-1307  USA
+
+  $Id$
+*/
+
+#ifndef Wiring_h
+#define Wiring_h
+
+#include <avr/io.h>
+#include <stdlib.h>
+#include "binary.h"
+
+#ifdef __cplusplus
+extern "C"{
+#endif
+
+#define HIGH 0x1
+#define LOW  0x0
+
+#define INPUT 0x0
+#define OUTPUT 0x1
+
+#define true 0x1
+#define false 0x0
+
+#define PI 3.1415926535897932384626433832795
+#define HALF_PI 1.5707963267948966192313216916398
+#define TWO_PI 6.283185307179586476925286766559
+#define DEG_TO_RAD 0.017453292519943295769236907684886
+#define RAD_TO_DEG 57.295779513082320876798154814105
+
+#define SERIAL  0x0
+#define DISPLAY 0x1
+
+#define LSBFIRST 0
+#define MSBFIRST 1
+
+#define CHANGE 1
+#define FALLING 2
+#define RISING 3
+
+#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
+#define INTERNAL1V1 2
+#define INTERNAL2V56 3
+#else
+#define INTERNAL 3
+#endif
+#define DEFAULT 1
+#define EXTERNAL 0
+
+// undefine stdlib's abs if encountered
+#ifdef abs
+#undef abs
+#endif
+
+#define min(a,b) ((a)<(b)?(a):(b))
+#define max(a,b) ((a)>(b)?(a):(b))
+#define abs(x) ((x)>0?(x):-(x))
+#define constrain(amt,low,high) ((amt)<(low)?(low):((amt)>(high)?(high):(amt)))
+#define round(x)     ((x)>=0?(long)((x)+0.5):(long)((x)-0.5))
+#define radians(deg) ((deg)*DEG_TO_RAD)
+#define degrees(rad) ((rad)*RAD_TO_DEG)
+#define sq(x) ((x)*(x))
+
+#define interrupts() sei()
+#define noInterrupts() cli()
+
+#define clockCyclesPerMicrosecond() ( F_CPU / 1000000L )
+#define clockCyclesToMicroseconds(a) ( ((a) * 1000L) / (F_CPU / 1000L) )
+#define microsecondsToClockCycles(a) ( ((a) * (F_CPU / 1000L)) / 1000L )
+
+#define lowByte(w) ((uint8_t) ((w) & 0xff))
+#define highByte(w) ((uint8_t) ((w) >> 8))
+
+#define bitRead(value, bit) (((value) >> (bit)) & 0x01)
+#define bitSet(value, bit) ((value) |= (1UL << (bit)))
+#define bitClear(value, bit) ((value) &= ~(1UL << (bit)))
+#define bitWrite(value, bit, bitvalue) (bitvalue ? bitSet(value, bit) : bitClear(value, bit))
+
+
+typedef unsigned int word;
+
+#define bit(b) (1UL << (b))
+
+typedef uint8_t boolean;
+typedef uint8_t byte;
+
+void init(void);
+
+void pinMode(uint8_t, uint8_t);
+void digitalWrite(uint8_t, uint8_t);
+int digitalRead(uint8_t);
+int analogRead(uint8_t);
+void analogReference(uint8_t mode);
+void analogWrite(uint8_t, int);
+
+unsigned long millis(void);
+unsigned long micros(void);
+void delay(unsigned long);
+void delayMicroseconds(unsigned int us);
+unsigned long pulseIn(uint8_t pin, uint8_t state, unsigned long timeout);
+
+void shiftOut(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder, uint8_t val);
+uint8_t shiftIn(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder);
+
+void attachInterrupt(uint8_t, void (*)(void), int mode);
+void detachInterrupt(uint8_t);
+
+void setup(void);
+void loop(void);
+
+#ifdef __cplusplus
+} // extern "C"
+#endif
+
+#endif
diff --git a/test/ardmake/hardware/cores/arduino/wiring_analog.c b/test/ardmake/hardware/cores/arduino/wiring_analog.c
new file mode 100644
index 0000000..d248f4c
--- /dev/null
+++ b/test/ardmake/hardware/cores/arduino/wiring_analog.c
@@ -0,0 +1,259 @@
+/*
+  wiring_analog.c - analog input and output
+  Part of Arduino - http://www.arduino.cc/
+
+  Copyright (c) 2005-2006 David A. Mellis
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+  Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General
+  Public License along with this library; if not, write to the
+  Free Software Foundation, Inc., 59 Temple Place, Suite 330,
+  Boston, MA  02111-1307  USA
+
+  Modified 28 September 2010 by Mark Sproul
+
+  $Id: wiring.c 248 2007-02-03 15:36:30Z mellis $
+*/
+
+#include "wiring_private.h"
+#include "pins_arduino.h"
+
+uint8_t analog_reference = DEFAULT;
+
+void analogReference(uint8_t mode)
+{
+	// can't actually set the register here because the default setting
+	// will connect AVCC and the AREF pin, which would cause a short if
+	// there's something connected to AREF.
+	analog_reference = mode;
+}
+
+int analogRead(uint8_t pin)
+{
+	uint8_t low, high;
+
+#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
+	if (pin >= 54) pin -= 54; // allow for channel or pin numbers
+#else
+	if (pin >= 14) pin -= 14; // allow for channel or pin numbers
+#endif
+
+#if defined(ADCSRB) && defined(MUX5)
+	// the MUX5 bit of ADCSRB selects whether we're reading from channels
+	// 0 to 7 (MUX5 low) or 8 to 15 (MUX5 high).
+	ADCSRB = (ADCSRB & ~(1 << MUX5)) | (((pin >> 3) & 0x01) << MUX5);
+#endif
+  
+	// set the analog reference (high two bits of ADMUX) and select the
+	// channel (low 4 bits).  this also sets ADLAR (left-adjust result)
+	// to 0 (the default).
+#if defined(ADMUX)
+	ADMUX = (analog_reference << 6) | (pin & 0x07);
+#endif
+
+	// without a delay, we seem to read from the wrong channel
+	//delay(1);
+
+#if defined(ADCSRA) && defined(ADCL)
+	// start the conversion
+	sbi(ADCSRA, ADSC);
+
+	// ADSC is cleared when the conversion finishes
+	while (bit_is_set(ADCSRA, ADSC));
+
+	// we have to read ADCL first; doing so locks both ADCL
+	// and ADCH until ADCH is read.  reading ADCL second would
+	// cause the results of each conversion to be discarded,
+	// as ADCL and ADCH would be locked when it completed.
+	low  = ADCL;
+	high = ADCH;
+#else
+	// we dont have an ADC, return 0
+	low  = 0;
+	high = 0;
+#endif
+
+	// combine the two bytes
+	return (high << 8) | low;
+}
+
+// Right now, PWM output only works on the pins with
+// hardware support.  These are defined in the appropriate
+// pins_*.c file.  For the rest of the pins, we default
+// to digital output.
+void analogWrite(uint8_t pin, int val)
+{
+	// We need to make sure the PWM output is enabled for those pins
+	// that support it, as we turn it off when digitally reading or
+	// writing with them.  Also, make sure the pin is in output mode
+	// for consistenty with Wiring, which doesn't require a pinMode
+	// call for the analog output pins.
+	pinMode(pin, OUTPUT);
+	if (val == 0)
+	{
+		digitalWrite(pin, LOW);
+	}
+	else if (val == 255)
+	{
+		digitalWrite(pin, HIGH);
+	}
+	else
+	{
+		switch(digitalPinToTimer(pin))
+		{
+			// XXX fix needed for atmega8
+			#if defined(TCCR0) && defined(COM00) && !defined(__AVR_ATmega8__)
+			case TIMER0A:
+				// connect pwm to pin on timer 0
+				sbi(TCCR0, COM00);
+				OCR0 = val; // set pwm duty
+				break;
+			#endif
+
+			#if defined(TCCR0A) && defined(COM0A1)
+			case TIMER0A:
+				// connect pwm to pin on timer 0, channel A
+				sbi(TCCR0A, COM0A1);
+				OCR0A = val; // set pwm duty
+				break;
+			#endif
+
+			#if defined(TCCR0A) && defined(COM0B1)
+			case TIMER0B:
+				// connect pwm to pin on timer 0, channel B
+				sbi(TCCR0A, COM0B1);
+				OCR0B = val; // set pwm duty
+				break;
+			#endif
+
+			#if defined(TCCR1A) && defined(COM1A1)
+			case TIMER1A:
+				// connect pwm to pin on timer 1, channel A
+				sbi(TCCR1A, COM1A1);
+				OCR1A = val; // set pwm duty
+				break;
+			#endif
+
+			#if defined(TCCR1A) && defined(COM1B1)
+			case TIMER1B:
+				// connect pwm to pin on timer 1, channel B
+				sbi(TCCR1A, COM1B1);
+				OCR1B = val; // set pwm duty
+				break;
+			#endif
+
+			#if defined(TCCR2) && defined(COM21)
+			case TIMER2:
+				// connect pwm to pin on timer 2
+				sbi(TCCR2, COM21);
+				OCR2 = val; // set pwm duty
+				break;
+			#endif
+
+			#if defined(TCCR2A) && defined(COM2A1)
+			case TIMER2A:
+				// connect pwm to pin on timer 2, channel A
+				sbi(TCCR2A, COM2A1);
+				OCR2A = val; // set pwm duty
+				break;
+			#endif
+
+			#if defined(TCCR2A) && defined(COM2B1)
+			case TIMER2B:
+				// connect pwm to pin on timer 2, channel B
+				sbi(TCCR2A, COM2B1);
+				OCR2B = val; // set pwm duty
+				break;
+			#endif
+
+			#if defined(TCCR3A) && defined(COM3A1)
+			case TIMER3A:
+				// connect pwm to pin on timer 3, channel A
+				sbi(TCCR3A, COM3A1);
+				OCR3A = val; // set pwm duty
+				break;
+			#endif
+
+			#if defined(TCCR3A) && defined(COM3B1)
+			case TIMER3B:
+				// connect pwm to pin on timer 3, channel B
+				sbi(TCCR3A, COM3B1);
+				OCR3B = val; // set pwm duty
+				break;
+			#endif
+
+			#if defined(TCCR3A) && defined(COM3C1)
+			case TIMER3C:
+				// connect pwm to pin on timer 3, channel C
+				sbi(TCCR3A, COM3C1);
+				OCR3C = val; // set pwm duty
+				break;
+			#endif
+
+			#if defined(TCCR4A) && defined(COM4A1)
+			case TIMER4A:
+				// connect pwm to pin on timer 4, channel A
+				sbi(TCCR4A, COM4A1);
+				OCR4A = val; // set pwm duty
+				break;
+			#endif
+
+			#if defined(TCCR4A) && defined(COM4B1)
+			case TIMER4B:
+				// connect pwm to pin on timer 4, channel B
+				sbi(TCCR4A, COM4B1);
+				OCR4B = val; // set pwm duty
+				break;
+			#endif
+
+			#if defined(TCCR4A) && defined(COM4C1)
+			case TIMER4C:
+				// connect pwm to pin on timer 4, channel C
+				sbi(TCCR4A, COM4C1);
+				OCR4C = val; // set pwm duty
+				break;
+			#endif
+
+			#if defined(TCCR5A) && defined(COM5A1)
+			case TIMER5A:
+				// connect pwm to pin on timer 5, channel A
+				sbi(TCCR5A, COM5A1);
+				OCR5A = val; // set pwm duty
+				break;
+			#endif
+
+			#if defined(TCCR5A) && defined(COM5B1)
+			case TIMER5B:
+				// connect pwm to pin on timer 5, channel B
+				sbi(TCCR5A, COM5B1);
+				OCR5B = val; // set pwm duty
+				break;
+			#endif
+
+			#if defined(TCCR5A) && defined(COM5C1)
+			case TIMER5C:
+				// connect pwm to pin on timer 5, channel C
+				sbi(TCCR5A, COM5C1);
+				OCR5C = val; // set pwm duty
+				break;
+			#endif
+
+			case NOT_ON_TIMER:
+			default:
+				if (val < 128) {
+					digitalWrite(pin, LOW);
+				} else {
+					digitalWrite(pin, HIGH);
+				}
+		}
+	}
+}
diff --git a/test/ardmake/hardware/cores/arduino/wiring_analog.d b/test/ardmake/hardware/cores/arduino/wiring_analog.d
new file mode 100644
index 0000000..43e0c9c
--- /dev/null
+++ b/test/ardmake/hardware/cores/arduino/wiring_analog.d
@@ -0,0 +1,24 @@
+ardmake/hardware/cores/arduino/wiring_analog.o ardmake/hardware/cores/arduino/wiring_analog.d: ardmake/hardware/cores/arduino/wiring_analog.c \
+  ardmake/hardware/cores/arduino/wiring_private.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/io.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/sfr_defs.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/inttypes.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/stdint.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/iom328p.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/portpins.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/common.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/version.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/fuse.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/lock.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/interrupt.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/delay.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/util/delay.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/util/delay_basic.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/stdio.h \
+  /usr/lib/gcc/avr/4.3.5/include/stdarg.h \
+  /usr/lib/gcc/avr/4.3.5/include/stddef.h \
+  ardmake/hardware/cores/arduino/wiring.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/stdlib.h \
+  ardmake/hardware/cores/arduino/binary.h \
+  ardmake/hardware/cores/arduino/pins_arduino.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/pgmspace.h
diff --git a/test/ardmake/hardware/cores/arduino/wiring_digital.c b/test/ardmake/hardware/cores/arduino/wiring_digital.c
new file mode 100644
index 0000000..0949da4
--- /dev/null
+++ b/test/ardmake/hardware/cores/arduino/wiring_digital.c
@@ -0,0 +1,166 @@
+/*
+  wiring_digital.c - digital input and output functions
+  Part of Arduino - http://www.arduino.cc/
+
+  Copyright (c) 2005-2006 David A. Mellis
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+  Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General
+  Public License along with this library; if not, write to the
+  Free Software Foundation, Inc., 59 Temple Place, Suite 330,
+  Boston, MA  02111-1307  USA
+
+  Modified 28 September 2010 by Mark Sproul
+
+  $Id: wiring.c 248 2007-02-03 15:36:30Z mellis $
+*/
+
+#include "wiring_private.h"
+#include "pins_arduino.h"
+
+void pinMode(uint8_t pin, uint8_t mode)
+{
+	uint8_t bit = digitalPinToBitMask(pin);
+	uint8_t port = digitalPinToPort(pin);
+	volatile uint8_t *reg;
+
+	if (port == NOT_A_PIN) return;
+
+	// JWS: can I let the optimizer do this?
+	reg = portModeRegister(port);
+
+	if (mode == INPUT) { 
+		uint8_t oldSREG = SREG;
+                cli();
+		*reg &= ~bit;
+		SREG = oldSREG;
+	} else {
+		uint8_t oldSREG = SREG;
+                cli();
+		*reg |= bit;
+		SREG = oldSREG;
+	}
+}
+
+// Forcing this inline keeps the callers from having to push their own stuff
+// on the stack. It is a good performance win and only takes 1 more byte per
+// user than calling. (It will take more bytes on the 168.)
+//
+// But shouldn't this be moved into pinMode? Seems silly to check and do on
+// each digitalread or write.
+//
+// Mark Sproul:
+// - Removed inline. Save 170 bytes on atmega1280
+// - changed to a switch statment; added 32 bytes but much easier to read and maintain.
+// - Added more #ifdefs, now compiles for atmega645
+//
+//static inline void turnOffPWM(uint8_t timer) __attribute__ ((always_inline));
+//static inline void turnOffPWM(uint8_t timer)
+static void turnOffPWM(uint8_t timer)
+{
+	switch (timer)
+	{
+		#if defined(TCCR1A) && defined(COM1A1)
+		case TIMER1A:   cbi(TCCR1A, COM1A1);    break;
+		#endif
+		#if defined(TCCR1A) && defined(COM1B1)
+		case TIMER1B:   cbi(TCCR1A, COM1B1);    break;
+		#endif
+		
+		#if defined(TCCR2) && defined(COM21)
+		case  TIMER2:   cbi(TCCR2, COM21);      break;
+		#endif
+		
+		#if defined(TCCR0A) && defined(COM0A1)
+		case  TIMER0A:  cbi(TCCR0A, COM0A1);    break;
+		#endif
+		
+		#if defined(TIMER0B) && defined(COM0B1)
+		case  TIMER0B:  cbi(TCCR0A, COM0B1);    break;
+		#endif
+		#if defined(TCCR2A) && defined(COM2A1)
+		case  TIMER2A:  cbi(TCCR2A, COM2A1);    break;
+		#endif
+		#if defined(TCCR2A) && defined(COM2B1)
+		case  TIMER2B:  cbi(TCCR2A, COM2B1);    break;
+		#endif
+		
+		#if defined(TCCR3A) && defined(COM3A1)
+		case  TIMER3A:  cbi(TCCR3A, COM3A1);    break;
+		#endif
+		#if defined(TCCR3A) && defined(COM3B1)
+		case  TIMER3B:  cbi(TCCR3A, COM3B1);    break;
+		#endif
+		#if defined(TCCR3A) && defined(COM3C1)
+		case  TIMER3C:  cbi(TCCR3A, COM3C1);    break;
+		#endif
+
+		#if defined(TCCR4A) && defined(COM4A1)
+		case  TIMER4A:  cbi(TCCR4A, COM4A1);    break;
+		#endif
+		#if defined(TCCR4A) && defined(COM4B1)
+		case  TIMER4B:  cbi(TCCR4A, COM4B1);    break;
+		#endif
+		#if defined(TCCR4A) && defined(COM4C1)
+		case  TIMER4C:  cbi(TCCR4A, COM4C1);    break;
+		#endif
+		#if defined(TCCR5A)
+		case  TIMER5A:  cbi(TCCR5A, COM5A1);    break;
+		case  TIMER5B:  cbi(TCCR5A, COM5B1);    break;
+		case  TIMER5C:  cbi(TCCR5A, COM5C1);    break;
+		#endif
+	}
+}
+
+void digitalWrite(uint8_t pin, uint8_t val)
+{
+	uint8_t timer = digitalPinToTimer(pin);
+	uint8_t bit = digitalPinToBitMask(pin);
+	uint8_t port = digitalPinToPort(pin);
+	volatile uint8_t *out;
+
+	if (port == NOT_A_PIN) return;
+
+	// If the pin that support PWM output, we need to turn it off
+	// before doing a digital write.
+	if (timer != NOT_ON_TIMER) turnOffPWM(timer);
+
+	out = portOutputRegister(port);
+
+	if (val == LOW) {
+		uint8_t oldSREG = SREG;
+                cli();
+		*out &= ~bit;
+		SREG = oldSREG;
+	} else {
+		uint8_t oldSREG = SREG;
+                cli();
+		*out |= bit;
+		SREG = oldSREG;
+	}
+}
+
+int digitalRead(uint8_t pin)
+{
+	uint8_t timer = digitalPinToTimer(pin);
+	uint8_t bit = digitalPinToBitMask(pin);
+	uint8_t port = digitalPinToPort(pin);
+
+	if (port == NOT_A_PIN) return LOW;
+
+	// If the pin that support PWM output, we need to turn it off
+	// before getting a digital reading.
+	if (timer != NOT_ON_TIMER) turnOffPWM(timer);
+
+	if (*portInputRegister(port) & bit) return HIGH;
+	return LOW;
+}
diff --git a/test/ardmake/hardware/cores/arduino/wiring_digital.d b/test/ardmake/hardware/cores/arduino/wiring_digital.d
new file mode 100644
index 0000000..269f2ff
--- /dev/null
+++ b/test/ardmake/hardware/cores/arduino/wiring_digital.d
@@ -0,0 +1,24 @@
+ardmake/hardware/cores/arduino/wiring_digital.o ardmake/hardware/cores/arduino/wiring_digital.d: ardmake/hardware/cores/arduino/wiring_digital.c \
+  ardmake/hardware/cores/arduino/wiring_private.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/io.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/sfr_defs.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/inttypes.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/stdint.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/iom328p.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/portpins.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/common.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/version.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/fuse.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/lock.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/interrupt.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/delay.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/util/delay.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/util/delay_basic.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/stdio.h \
+  /usr/lib/gcc/avr/4.3.5/include/stdarg.h \
+  /usr/lib/gcc/avr/4.3.5/include/stddef.h \
+  ardmake/hardware/cores/arduino/wiring.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/stdlib.h \
+  ardmake/hardware/cores/arduino/binary.h \
+  ardmake/hardware/cores/arduino/pins_arduino.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/pgmspace.h
diff --git a/test/ardmake/hardware/cores/arduino/wiring_private.h b/test/ardmake/hardware/cores/arduino/wiring_private.h
new file mode 100644
index 0000000..11f6f00
--- /dev/null
+++ b/test/ardmake/hardware/cores/arduino/wiring_private.h
@@ -0,0 +1,68 @@
+/*
+  wiring_private.h - Internal header file.
+  Part of Arduino - http://www.arduino.cc/
+
+  Copyright (c) 2005-2006 David A. Mellis
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+  Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General
+  Public License along with this library; if not, write to the
+  Free Software Foundation, Inc., 59 Temple Place, Suite 330,
+  Boston, MA  02111-1307  USA
+
+  $Id: wiring.h 239 2007-01-12 17:58:39Z mellis $
+*/
+
+#ifndef WiringPrivate_h
+#define WiringPrivate_h
+
+#include <avr/io.h>
+#include <avr/interrupt.h>
+#include <avr/delay.h>
+#include <stdio.h>
+#include <stdarg.h>
+
+#include "wiring.h"
+
+#ifdef __cplusplus
+extern "C"{
+#endif
+
+#ifndef cbi
+#define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit))
+#endif
+#ifndef sbi
+#define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit))
+#endif
+
+#define EXTERNAL_INT_0 0
+#define EXTERNAL_INT_1 1
+#define EXTERNAL_INT_2 2
+#define EXTERNAL_INT_3 3
+#define EXTERNAL_INT_4 4
+#define EXTERNAL_INT_5 5
+#define EXTERNAL_INT_6 6
+#define EXTERNAL_INT_7 7
+
+#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
+#define EXTERNAL_NUM_INTERRUPTS 8
+#else
+#define EXTERNAL_NUM_INTERRUPTS 2
+#endif
+
+typedef void (*voidFuncPtr)(void);
+
+#ifdef __cplusplus
+} // extern "C"
+#endif
+
+#endif
diff --git a/test/ardmake/hardware/cores/arduino/wiring_pulse.c b/test/ardmake/hardware/cores/arduino/wiring_pulse.c
new file mode 100644
index 0000000..0d96886
--- /dev/null
+++ b/test/ardmake/hardware/cores/arduino/wiring_pulse.c
@@ -0,0 +1,69 @@
+/*
+  wiring_pulse.c - pulseIn() function
+  Part of Arduino - http://www.arduino.cc/
+
+  Copyright (c) 2005-2006 David A. Mellis
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+  Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General
+  Public License along with this library; if not, write to the
+  Free Software Foundation, Inc., 59 Temple Place, Suite 330,
+  Boston, MA  02111-1307  USA
+
+  $Id: wiring.c 248 2007-02-03 15:36:30Z mellis $
+*/
+
+#include "wiring_private.h"
+#include "pins_arduino.h"
+
+/* Measures the length (in microseconds) of a pulse on the pin; state is HIGH
+ * or LOW, the type of pulse to measure.  Works on pulses from 2-3 microseconds
+ * to 3 minutes in length, but must be called at least a few dozen microseconds
+ * before the start of the pulse. */
+unsigned long pulseIn(uint8_t pin, uint8_t state, unsigned long timeout)
+{
+	// cache the port and bit of the pin in order to speed up the
+	// pulse width measuring loop and achieve finer resolution.  calling
+	// digitalRead() instead yields much coarser resolution.
+	uint8_t bit = digitalPinToBitMask(pin);
+	uint8_t port = digitalPinToPort(pin);
+	uint8_t stateMask = (state ? bit : 0);
+	unsigned long width = 0; // keep initialization out of time critical area
+	
+	// convert the timeout from microseconds to a number of times through
+	// the initial loop; it takes 16 clock cycles per iteration.
+	unsigned long numloops = 0;
+	unsigned long maxloops = microsecondsToClockCycles(timeout) / 16;
+	
+	// wait for any previous pulse to end
+	while ((*portInputRegister(port) & bit) == stateMask)
+		if (numloops++ == maxloops)
+			return 0;
+	
+	// wait for the pulse to start
+	while ((*portInputRegister(port) & bit) != stateMask)
+		if (numloops++ == maxloops)
+			return 0;
+	
+	// wait for the pulse to stop
+	while ((*portInputRegister(port) & bit) == stateMask) {
+		if (numloops++ == maxloops)
+			return 0;
+		width++;
+	}
+
+	// convert the reading to microseconds. The loop has been determined
+	// to be 20 clock cycles long and have about 16 clocks between the edge
+	// and the start of the loop. There will be some error introduced by
+	// the interrupt handlers.
+	return clockCyclesToMicroseconds(width * 21 + 16); 
+}
diff --git a/test/ardmake/hardware/cores/arduino/wiring_pulse.d b/test/ardmake/hardware/cores/arduino/wiring_pulse.d
new file mode 100644
index 0000000..da7dd53
--- /dev/null
+++ b/test/ardmake/hardware/cores/arduino/wiring_pulse.d
@@ -0,0 +1,24 @@
+ardmake/hardware/cores/arduino/wiring_pulse.o ardmake/hardware/cores/arduino/wiring_pulse.d: ardmake/hardware/cores/arduino/wiring_pulse.c \
+  ardmake/hardware/cores/arduino/wiring_private.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/io.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/sfr_defs.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/inttypes.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/stdint.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/iom328p.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/portpins.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/common.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/version.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/fuse.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/lock.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/interrupt.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/delay.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/util/delay.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/util/delay_basic.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/stdio.h \
+  /usr/lib/gcc/avr/4.3.5/include/stdarg.h \
+  /usr/lib/gcc/avr/4.3.5/include/stddef.h \
+  ardmake/hardware/cores/arduino/wiring.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/stdlib.h \
+  ardmake/hardware/cores/arduino/binary.h \
+  ardmake/hardware/cores/arduino/pins_arduino.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/pgmspace.h
diff --git a/test/ardmake/hardware/cores/arduino/wiring_shift.c b/test/ardmake/hardware/cores/arduino/wiring_shift.c
new file mode 100644
index 0000000..cfe7867
--- /dev/null
+++ b/test/ardmake/hardware/cores/arduino/wiring_shift.c
@@ -0,0 +1,55 @@
+/*
+  wiring_shift.c - shiftOut() function
+  Part of Arduino - http://www.arduino.cc/
+
+  Copyright (c) 2005-2006 David A. Mellis
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+  Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General
+  Public License along with this library; if not, write to the
+  Free Software Foundation, Inc., 59 Temple Place, Suite 330,
+  Boston, MA  02111-1307  USA
+
+  $Id: wiring.c 248 2007-02-03 15:36:30Z mellis $
+*/
+
+#include "wiring_private.h"
+
+uint8_t shiftIn(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder) {
+	uint8_t value = 0;
+	uint8_t i;
+
+	for (i = 0; i < 8; ++i) {
+		digitalWrite(clockPin, HIGH);
+		if (bitOrder == LSBFIRST)
+			value |= digitalRead(dataPin) << i;
+		else
+			value |= digitalRead(dataPin) << (7 - i);
+		digitalWrite(clockPin, LOW);
+	}
+	return value;
+}
+
+void shiftOut(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder, uint8_t val)
+{
+	uint8_t i;
+
+	for (i = 0; i < 8; i++)  {
+		if (bitOrder == LSBFIRST)
+			digitalWrite(dataPin, !!(val & (1 << i)));
+		else	
+			digitalWrite(dataPin, !!(val & (1 << (7 - i))));
+			
+		digitalWrite(clockPin, HIGH);
+		digitalWrite(clockPin, LOW);		
+	}
+}
diff --git a/test/ardmake/hardware/cores/arduino/wiring_shift.d b/test/ardmake/hardware/cores/arduino/wiring_shift.d
new file mode 100644
index 0000000..1186d5b
--- /dev/null
+++ b/test/ardmake/hardware/cores/arduino/wiring_shift.d
@@ -0,0 +1,22 @@
+ardmake/hardware/cores/arduino/wiring_shift.o ardmake/hardware/cores/arduino/wiring_shift.d: ardmake/hardware/cores/arduino/wiring_shift.c \
+  ardmake/hardware/cores/arduino/wiring_private.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/io.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/sfr_defs.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/inttypes.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/stdint.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/iom328p.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/portpins.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/common.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/version.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/fuse.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/lock.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/interrupt.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/delay.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/util/delay.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/util/delay_basic.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/stdio.h \
+  /usr/lib/gcc/avr/4.3.5/include/stdarg.h \
+  /usr/lib/gcc/avr/4.3.5/include/stddef.h \
+  ardmake/hardware/cores/arduino/wiring.h \
+  /usr/lib/gcc/avr/4.3.5/../../../avr/include/stdlib.h \
+  ardmake/hardware/cores/arduino/binary.h