first commitHEADmaster

1 files changed, 109 insertions, 0 deletions

diff --git a/test/ardmake/hardware/bootloaders/bt/Makefile b/test/ardmake/hardware/bootloaders/bt/Makefile
new file mode 100644
index 0000000..431f2e7
--- /dev/null
+++ b/test/ardmake/hardware/bootloaders/bt/Makefile
@@ -0,0 +1,109 @@
+# Makefile for ATmegaBOOT
+# E.Lins, 18.7.2005
+# $Id$
+#
+# Instructions
+#
+# To make bootloader .hex file:
+# make diecimila
+# make lilypad
+# make ng
+# etc...
+#
+# To burn bootloader .hex file:
+# make diecimila_isp
+# make lilypad_isp
+# make ng_isp
+# etc...
+
+# program name should not be changed...
+PROGRAM    = ATmegaBOOT_168
+
+# enter the parameters for the avrdude isp tool
+ISPTOOL	   = stk500v2
+ISPPORT	   = usb
+ISPSPEED   = -b 115200
+
+MCU_TARGET = atmega168
+LDSECTION  = --section-start=.text=0x3800
+
+# the efuse should really be 0xf8; since, however, only the lower
+# three bits of that byte are used on the atmega168, avrdude gets
+# confused if you specify 1's for the higher bits, see:
+# http://tinker.it/now/2007/02/24/the-tale-of-avrdude-atmega168-and-extended-bits-fuses/
+#
+# similarly, the lock bits should be 0xff instead of 0x3f (to
+# unlock the bootloader section) and 0xcf instead of 0x0f (to
+# lock it), but since the high two bits of the lock byte are
+# unused, avrdude would get confused.
+
+ISPFUSES    = avrdude -c $(ISPTOOL) -p $(MCU_TARGET) -P $(ISPPORT) $(ISPSPEED) \
+-e -u -U lock:w:0x3f:m -U efuse:w:0x$(EFUSE):m -U hfuse:w:0x$(HFUSE):m -U lfuse:w:0x$(LFUSE):m
+ISPFLASH    = avrdude -c $(ISPTOOL) -p $(MCU_TARGET) -P $(ISPPORT) $(ISPSPEED) \
+-U flash:w:$(PROGRAM)_$(TARGET).hex -U lock:w:0x0f:m
+
+STK500 = "C:\Program Files\Atmel\AVR Tools\STK500\Stk500.exe"
+STK500-1 = $(STK500) -e -d$(MCU_TARGET) -pf -vf -if$(PROGRAM)_$(TARGET).hex \
+-lFF -LFF -f$(HFUSE)$(LFUSE) -EF8 -ms -q -cUSB -I200kHz -s -wt
+STK500-2 = $(STK500) -d$(MCU_TARGET) -ms -q -lCF -LCF -cUSB -I200kHz -s -wt
+
+
+OBJ        = $(PROGRAM).o
+OPTIMIZE   = -O2
+
+DEFS       = 
+LIBS       =
+
+CC         = avr-gcc
+
+# Override is only needed by avr-lib build system.
+
+override CFLAGS        = -g -Wall $(OPTIMIZE) -mmcu=$(MCU_TARGET) -DF_CPU=$(AVR_FREQ) $(DEFS)
+override LDFLAGS       = -Wl,$(LDSECTION)
+#override LDFLAGS       = -Wl,-Map,$(PROGRAM).map,$(LDSECTION)
+
+OBJCOPY        = avr-objcopy
+OBJDUMP        = avr-objdump
+
+all:
+
+atmega328_bt: TARGET = atmega328_bt
+atmega328_bt: MCU_TARGET = atmega328p
+atmega328_bt: AVR_FREQ = 16000000L 
+atmega328_bt: LDSECTION  = --section-start=.text=0x7000
+atmega328_bt: $(PROGRAM)_atmega328_bt.hex
+
+atmega328_bt_isp: atmega328_bt
+atmega328_bt_isp: TARGET = atmega328_bt
+atmega328_bt_isp: MCU_TARGET = atmega328p
+atmega328_bt_isp: HFUSE = D8
+atmega328_bt_isp: LFUSE = FF
+atmega328_bt_isp: EFUSE = 05
+atmega328_bt_isp: isp
+
+isp: $(TARGET)
+	$(ISPFUSES)
+	$(ISPFLASH)
+
+isp-stk500: $(PROGRAM)_$(TARGET).hex
+	$(STK500-1)
+	$(STK500-2)
+
+%.elf: $(OBJ)
+	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $^ $(LIBS)
+
+clean:
+	rm -rf *.o *.elf *.lst *.map *.sym *.lss *.eep *.srec *.bin *.hex
+
+%.lst: %.elf
+	$(OBJDUMP) -h -S $< > $@
+
+%.hex: %.elf
+	$(OBJCOPY) -j .text -j .data -O ihex $< $@
+
+%.srec: %.elf
+	$(OBJCOPY) -j .text -j .data -O srec $< $@
+
+%.bin: %.elf
+	$(OBJCOPY) -j .text -j .data -O binary $< $@
+