diff options
Diffstat (limited to 'test/ardmake/hardware/firmwares/arduino-usbserial')
10 files changed, 2294 insertions, 0 deletions
diff --git a/test/ardmake/hardware/firmwares/arduino-usbserial/Arduino-usbserial-mega.hex b/test/ardmake/hardware/firmwares/arduino-usbserial/Arduino-usbserial-mega.hex new file mode 100644 index 0000000..fbbeb07 --- /dev/null +++ b/test/ardmake/hardware/firmwares/arduino-usbserial/Arduino-usbserial-mega.hex @@ -0,0 +1,256 @@ +:10000000A2C00000BBC00000B9C00000B7C0000023
+:10001000B5C00000B3C00000B1C00000AFC0000018
+:10002000ADC00000ABC00000A9C000005AC4000071
+:100030001EC40000A3C00000A1C000009FC00000BB
+:100040009DC000009BC0000099C0000097C0000048
+:1000500095C0000093C0000091C0000014C10000D2
+:100060008DC000008BC0000089C0000087C0000068
+:1000700085C0000083C0000081C000007FC0000078
+:100080007DC000007BC0000079C0000077C0000088
+:1000900075C0000073C000001201100102000008CA
+:1000A0004123100001000102DC0109023E000201AF
+:1000B00000C0320904000001020201000524000111
+:1000C0001004240206052406000107058203080027
+:1000D000FF09040100020A000000070504024000B5
+:1000E00001070583024000010403090432034100B3
+:1000F00072006400750069006E006F002000280027
+:100100007700770077002E006100720064007500B0
+:1001100069006E006F002E0063006300290000007C
+:100120002403410072006400750069006E006F00D6
+:1001300020004D006500670061002000320035009E
+:1001400036003000000011241FBECFEFD2E0DEBF2A
+:10015000CDBF11E0A0E0B1E0E0EDFFE002C005900E
+:100160000D92A631B107D9F712E0A6E1B1E001C0C6
+:100170001D92AF32B107E1F7F1D028C741CF9C0102
+:10018000DC01AE57BF4FED91FC9111974191119653
+:10019000FC93EE9380589F4FE817F90711F42D93C5
+:1001A0003C939FB7F894F901EC57FF4F8081815041
+:1001B00080839FBF842F0895DF92EF92FF920F9369
+:1001C0001F93FC018489813019F0823021F405C02D
+:1001D00040E3D42E04C0DD2402C030E2D32E838954
+:1001E000823011F488E0D82A8589873031F0883050
+:1001F00031F0863031F482E003C084E001C086E053
+:10020000D82A1092C9001092C8001092CA00E78440
+:10021000F0880189128980E0E81681EEF80680E016
+:10022000080780E0180719F420E130E00FC0C8018A
+:10023000B701969587957795679560587B47814E6E
+:100240009F4FA8019701A0D6215030403093CD0098
+:100250002093CC00D092CA0080E0E81681EEF80628
+:1002600080E0080780E0180711F082E001C080E01C
+:100270008093C80088E98093C9001F910F91FF9077
+:10028000EF90DF9008951F920F920FB60F921124F6
+:100290002F938F939F93EF93FF939091CE008EB304
+:1002A0008430F1F4E0919901F0919A019083E0910A
+:1002B0009901F0919A01CF01019690939A01809350
+:1002C00099018959914021F489E191E092838183D8
+:1002D0009FB7F89480919D018F5F80939D019FBF90
+:1002E000FF91EF919F918F912F910F900FBE0F90E3
+:1002F0001F901895FC01858580FF02C05F980895C6
+:100300005F9A089580E091E0D5C580E091E088C5CE
+:1003100084B7877F84BF28E10FB6F89420936000EC
+:10032000109260000FBE87E690E09093CD0080931E
+:10033000CC0086E08093CA001092C8002093C900C8
+:10034000539A5A9A8AB180638AB98BB180638BB908
+:1003500083D284E085BD5F9A579A08950F931F93C7
+:10036000CF93DF93D5DF2FB7F8948EE991E0909388
+:100370001F0280931E0290932102809320022FBFC0
+:100380002FB7F89489E191E090939A0180939901B5
+:1003900090939C0180939B012FBF7894CEE9D1E08C
+:1003A00003E08FB7F894909122028FBF903809F143
+:1003B00080E091E0ABD497FD1CC0E0911E02F0916B
+:1003C0001F028083E0911E02F0911F02CF0101966F
+:1003D00090931F0280931E028E51924011F4D2839B
+:1003E000C1839FB7F894809122028F5F809322028D
+:1003F0009FBF8FB7F89410919D018FBFA89902C03D
+:10040000113678F1A89A80919D01882361F05D985A
+:100410000093160108C089E191E0B1DE682F80E009
+:1004200091E0DAD411501123B1F78091160188239D
+:1004300051F0809116018150809316018091160130
+:10044000882309F45D9A80911701882351F08091E7
+:10045000170181508093170180911701882309F4B7
+:100460005C9A8FB7F894909122028FBF992369F01C
+:100470008EE991E084DE982F8091C80085FFFCCF43
+:100480009093CE005C980093170180E091E095D4A2
+:100490002AD487CFDA01923049F0933061F091305D
+:1004A000F9F4E8E9F0E022E130E01EC0EAEAF0E029
+:1004B0002EE330E019C0813049F0813018F08230ED
+:1004C00079F408C0E8EEF0E0849107C0ECEEF0E0CB
+:1004D000849103C0E0E2F1E08491282F30E004C071
+:1004E000E0E0F0E020E030E0ED93FC93C9010895F6
+:1004F00028E030E040E003C04F5F220F331F281791
+:100500003907D0F3842F8295807F08958093E90086
+:100510008091EB0081608093EB001092ED0060937E
+:10052000EC004093ED008091EE00881F8827881F23
+:1005300008951092F40090E09093E9001092F0007A
+:100540001092E8001092ED008091EB008E7F809376
+:10055000EB009F5F953081F70895809127028823F3
+:100560008CF403C08EB38823B1F08091E80082FF41
+:10057000F9CF8091E8008B778093E80008958EB3DF
+:10058000882349F08091E80080FFF9CF8091E8004E
+:100590008E778093E800089594E68091EC0080FFC8
+:1005A00005C08091E80080FF05C023C08091E8006D
+:1005B00082FD1FC08EB3882311F482E008958EB3AC
+:1005C000853011F483E008958091EB0085FF02C02F
+:1005D00081E008958091E10082FFDFCF8091E1000A
+:1005E0008B7F8093E100992311F484E0089591506A
+:1005F000D4CF80E008959C0140912D0250912E02AD
+:100600004617570718F4F90120E038C06115710545
+:1006100011F0AB01F8CF8091E8008E778093E8006D
+:1006200040E050E0F0CF8091E80083FF02C081E01D
+:1006300008958091E80082FD2DC08EB3882381F15A
+:100640008EB3853079F18091E80080FF17C09091DA
+:10065000F20006C081918093F100415050409F5FAD
+:100660004115510511F09830A8F320E0983009F4B5
+:1006700021E08091E8008E778093E80041155105D4
+:1006800091F6222381F606C08EB3882349F08EB3FB
+:10069000853041F08091E80082FFF6CF80E0089538
+:1006A00082E0089583E008959C0140912D025091CD
+:1006B0002E024617570710F490E03BC061157105F4
+:1006C00011F0AB01F9CF8091E8008E778093E800BC
+:1006D00040E050E0F1CF8091E80083FF02C081E06C
+:1006E00008958091E80082FD30C08EB3882399F18F
+:1006F0008EB3853091F18091E80080FF1AC080911F
+:10070000F20009C0F9012F5F3F4FE491E093F1003F
+:10071000415050408F5F4115510511F0883090F3E2
+:1007200090E0883009F491E08091E8008E77809322
+:10073000E8004115510579F6992369F606C08EB394
+:10074000882349F08EB3853041F08091E80082FF24
+:10075000F6CF80E0089582E0089583E008959C013B
+:100760006115710529F48091E8008B778093E8008A
+:10077000F90120C08091E80083FF02C081E0089564
+:100780008EB3882339F18EB3853031F18091E80042
+:1007900082FFF0CF06C08091F100819361507040DC
+:1007A00021F08091F2008823B1F78091E8008B77E7
+:1007B0008093E80061157105E9F606C08EB38823C1
+:1007C00049F08EB3853041F08091E80080FFF6CF8C
+:1007D00080E0089582E0089583E0089542D044D0F7
+:1007E0001EBA10922502109224021092230284E075
+:1007F00089BD89B5826089BD09B400FEFDCF8091B5
+:10080000D800982F9F779093D80080688093D80065
+:10081000809163008E7F809363008091D8008F7DEC
+:100820008093D8008091E0008E7F8093E0008091DB
+:10083000E1008E7F8093E1008091E20081608093EF
+:10084000E2008091E100877F8093E1008091E200E7
+:1008500088608093E2000895C1DF81E080932602E2
+:1008600008951092E20008951092E10008951F92F9
+:100870000F920FB60F9211241F932F933F934F9314
+:100880005F936F937F938F939F93AF93BF93EF93F8
+:10089000FF93E9EEF0E0108117701082E0EFF0E0D6
+:1008A0008081877F80837894C3D0F894A9EEB0E0EC
+:1008B0001C92E0EFF0E08081886080831C93FF91C0
+:1008C000EF91BF91AF919F918F917F916F915F91C8
+:1008D0004F913F912F911F910F900FBE0F901F903E
+:1008E00018951F920F920FB60F9211242F933F93DA
+:1008F0004F935F936F937F938F939F93AF93BF9328
+:10090000EF93FF938091E10080FF1BC08091E20094
+:1009100080FF17C08091E1008E7F8093E10080917D
+:10092000E2008E7F8093E2008091E20080618093FC
+:10093000E2008091D80080628093D80019BC1EBA72
+:10094000D1D18091E10084FF29C08091E20084FF31
+:1009500025C084E089BD89B5826089BD09B400FEE7
+:10096000FDCF8091D8008F7D8093D8008091E100E9
+:100970008F7E8093E1008091E2008F7E8093E20081
+:100980008091E20081608093E200809125028823BB
+:1009900011F481E001C084E08EBBA4D18091E1001C
+:1009A00083FF27C08091E20083FF23C08091E10094
+:1009B000877F8093E10082E08EBB109225028091B8
+:1009C000E1008E7F8093E1008091E2008E7F809332
+:1009D000E2008091E20080618093E200AADD80E085
+:1009E00060E042E093DD8091F00088608093F00049
+:1009F00079D18091E10082FF0AC08091E20082FFFC
+:100A000006C08091E1008B7F8093E1006BD1FF9164
+:100A1000EF91BF91AF919F918F917F916F915F9176
+:100A20004F913F912F910F900FBE0F901F901895EF
+:100A30001F93DF93CF93CDB7DEB7AC970FB6F89483
+:100A4000DEBF0FBECDBFE7E2F2E08091F1008193FF
+:100A500022E0EF32F207C9F7809127023091280295
+:100A6000353009F487C0363040F43130C9F13130C7
+:100A700070F0333009F01DC133C0383009F4EFC0D5
+:100A8000393009F4FEC0363009F013C192C0803805
+:100A900021F0823809F00DC108C0909123028091A5
+:100AA0002402882399F0926011C080912B028770F4
+:100AB0008093E9008091EB0090E025E09695879582
+:100AC0002A95E1F7982F91701092E9008091E80043
+:100AD000877F8093E8009093F1001092F100CAC0E4
+:100AE000882319F0823009F0E4C090E08F71907093
+:100AF000009721F0029709F0DDC00CC08091290217
+:100B0000813009F0D7C010922402333069F5809308
+:100B100024022AC080912902882331F520912B02DA
+:100B2000277009F4C7C02093E9008091EB0080FF93
+:100B3000C1C0333021F48091EB00806213C08091FA
+:100B4000EB0080618093EB0081E090E002C0880FB1
+:100B5000991F2A95E2F78093EA001092EA008091AB
+:100B6000EB0088608093EB001092E9008091E80030
+:100B7000877F83C0882309F09CC01091290280914F
+:100B8000E800877F8093E800E8DC04C08EB3882308
+:100B900009F490C08091E80080FFF8CF812F8F7713
+:100BA00011F492E001C093E09EBB80688093E30063
+:100BB00081C08058823008F07CC0809129029091D9
+:100BC0002A0223E08C3D920799F55FB7F894DE0185
+:100BD00015964EE020E030E061E2E42FF0E0609313
+:100BE0005700849120FF03C082958F704F5F982F2C
+:100BF0009F70892F805D8A3308F0895F8C931196EE
+:100C00001C9211972F5F3F4F12962431310529F71F
+:100C10005FBF8AE28B8383E08C838091E800877FCB
+:100C20008093E800CE0103966AE270E0E4DC11C034
+:100C300060912B02AE014F5F5F4F2CDCBC0100972F
+:100C4000C9F18091E800877F8093E80089819A81CB
+:100C50002BDD8091E8008B778093E8002BC08038F3
+:100C600041F58091E800877F8093E800809125021C
+:100C70008093F1008091E8008E778093E8006DDC2E
+:100C800019C08823B1F490912902923098F4809190
+:100C9000E800877F8093E800909325025EDC8091D6
+:100CA0002502882311F483E001C084E08EBB2DDB94
+:100CB00001C028DB8091E80083FF0AC08091EB002F
+:100CC00080628093EB008091E800877F8093E8004A
+:100CD000AC960FB6F894DEBF0FBECDBFCF91DF91BB
+:100CE0001F91089508951F938EB3882361F010918A
+:100CF000E9001092E9008091E80083FF01C098DECE
+:100D000017701093E9001F9108950895FC018EB3A8
+:100D1000843021F587859089A189B2890097A10542
+:100D2000B105E1F085818093E9008091E80082FFC0
+:100D300015C08091F200882319F42FEF3FEF04C013
+:100D40008091F100282F30E08091F200882341F457
+:100D50008091E8008B778093E80002C02FEF3FEF8F
+:100D6000C9010895FC018EB3843011F587859089FF
+:100D7000A189B2890097A105B105D1F08181809345
+:100D8000E9008091F2008823A9F09091E800809119
+:100D9000E8008E778093E80095FD0CC0FDDB982F6E
+:100DA000882349F48091E8008E778093E80003C09F
+:100DB00092E001C090E0892F0895FC018EB3843049
+:100DC00051F487859089A189B2890097A105B10561
+:100DD00011F0CF01C7CF08951F93FC01162F8EB3DA
+:100DE0008430D9F487859089A189B2890097A105BB
+:100DF000B10599F081818093E9008091E80085FD3B
+:100E000008C08091E8008E778093E800C5DB8823D6
+:100E100029F41093F10080E001C082E01F91089551
+:100E20000F931F93CF93DF93EC010D96FC0189E0A4
+:100E3000DF011D928A95E9F72A813B8109818C8126
+:100E4000882311F410E001C014E0C90151DB182B14
+:100E50001260802F61E8412F59DB882329F12E8110
+:100E60003F810D818885882311F410E001C014E0D2
+:100E7000C9013EDB182B1260802F60E8412F46DB52
+:100E8000882391F02A853B8509858C85882311F478
+:100E900010E001C014E0C9012BDB182B1260802F79
+:100EA00061EC412F33DB01C080E0DF91CF911F91D6
+:100EB0000F910895CF93DF93EC018091E80083FFB9
+:100EC00060C0888190E020912B0230912C0228177D
+:100ED000390709F056C080912802813261F08232D0
+:100EE00020F4803209F04DC019C0823269F183329A
+:100EF00009F047C038C080912702813A09F041C00B
+:100F00008091E800877F8093E800CE010F9667E02C
+:100F100070E071DB8091E8008B7713C0809127022D
+:100F2000813279F58091E800877F8093E800CE01D7
+:100F30000F9667E070E013DCCE013ED98091E800A7
+:100F40008E778093E8001DC0809127028132C9F41A
+:100F50008091E800877F8093E800809129028D8747
+:100F6000CE01C8D90DC080912702813251F4809101
+:100F7000E800877F8093E800CE0160912902C5DEFA
+:100F8000ECDADF91CF910895A1E21A2EAA1BBB1BC8
+:100F9000FD010DC0AA1FBB1FEE1FFF1FA217B30745
+:100FA000E407F50720F0A21BB30BE40BF50B661F5B
+:100FB000771F881F991F1A9469F76095709580951F
+:100FC00090959B01AC01BD01CF010895F894FFCF2E
+:100FD0000003400000044000000208000000000080
+:060FE0000000000000000B
+:00000001FF
diff --git a/test/ardmake/hardware/firmwares/arduino-usbserial/Arduino-usbserial-uno.hex b/test/ardmake/hardware/firmwares/arduino-usbserial/Arduino-usbserial-uno.hex new file mode 100644 index 0000000..ca51dfa --- /dev/null +++ b/test/ardmake/hardware/firmwares/arduino-usbserial/Arduino-usbserial-uno.hex @@ -0,0 +1,256 @@ +:100000009CC00000B5C00000B3C00000B1C000003B
+:10001000AFC00000ADC00000ABC00000A9C0000030
+:10002000A7C00000A5C00000A3C0000054C4000089
+:1000300018C400009DC000009BC0000099C00000D3
+:1000400097C0000095C0000093C0000091C0000060
+:100050008FC000008DC000008BC000000EC10000EA
+:1000600087C0000085C0000083C0000081C0000080
+:100070007FC000007DC000007BC0000079C0000090
+:1000800077C0000075C0000073C0000071C00000A0
+:100090006FC000006DC000001201100102000008D6
+:1000A0004123010001000102DC0109023E000201BE
+:1000B00000C0320904000001020201000524000111
+:1000C0001004240206052406000107058203080027
+:1000D000FF09040100020A000000070504024000B5
+:1000E00001070583024000010403090432034100B3
+:1000F00072006400750069006E006F002000280027
+:100100007700770077002E006100720064007500B0
+:1001100069006E006F002E0063006300290000007C
+:100120001803410072006400750069006E006F00E2
+:10013000200055006E006F00000011241FBECFEF9D
+:10014000D2E0DEBFCDBF11E0A0E0B1E0E4ECFFE023
+:1001500002C005900D92A631B107D9F712E0A6E1D1
+:10016000B1E001C01D92AF32B107E1F7F1D028C76D
+:1001700047CF9C01DC01AE57BF4FED91FC91119729
+:1001800041911196FC93EE9380589F4FE817F90721
+:1001900011F42D933C939FB7F894F901EC57FF4F5E
+:1001A0008081815080839FBF842F0895DF92EF92DA
+:1001B000FF920F931F93FC018489813019F08230E4
+:1001C00021F405C040E3D42E04C0DD2402C030E297
+:1001D000D32E8389823011F488E0D82A858987302C
+:1001E00031F0883031F0863031F482E003C084E0B1
+:1001F00001C086E0D82A1092C9001092C80010925F
+:10020000CA00E784F0880189128980E0E81681EE4F
+:10021000F80680E0080780E0180719F420E130E0D4
+:100220000FC0C801B7019695879577956795605877
+:100230007B47814E9F4FA8019701A0D621503040A7
+:100240003093CD002093CC00D092CA0080E0E81615
+:1002500081EEF80680E0080780E0180711F082E0E0
+:1002600001C080E08093C80088E98093C9001F9195
+:100270000F91FF90EF90DF9008951F920F920FB6AD
+:100280000F9211242F938F939F93EF93FF9390914D
+:10029000CE008EB38430F1F4E0919901F0919A018F
+:1002A0009083E0919901F0919A01CF01019690938A
+:1002B0009A01809399018959914021F489E191E053
+:1002C000928381839FB7F89480919D018F5F809383
+:1002D0009D019FBFFF91EF919F918F912F910F9063
+:1002E0000FBE0F901F901895FC01858580FF02C0FE
+:1002F0005F9808955F9A089580E091E0D5C580E009
+:1003000091E088C584B7877F84BF28E10FB6F89451
+:1003100020936000109260000FBE87E690E09093FB
+:10032000CD008093CC0086E08093CA001092C80074
+:100330002093C900539A5A9A8AB180638AB98BB1C3
+:1003400080638BB983D284E085BD5F9A579A089504
+:100350000F931F93CF93DF93D5DF2FB7F8948EE9D8
+:1003600091E090931F0280931E029093210280934C
+:1003700020022FBF2FB7F89489E191E090939A0162
+:100380008093990190939C0180939B012FBF789457
+:10039000CEE9D1E003E08FB7F894909122028FBFAD
+:1003A000903809F180E091E0ABD497FD1CC0E0915A
+:1003B0001E02F0911F028083E0911E02F0911F0245
+:1003C000CF01019690931F0280931E028E5192409E
+:1003D00011F4D283C1839FB7F894809122028F5F7A
+:1003E000809322029FBF8FB7F89410919D018FBF19
+:1003F000A89902C0113678F1A89A80919D018823AE
+:1004000061F05D980093160108C089E191E0B1DECA
+:10041000682F80E091E0DAD411501123B1F7809178
+:100420001601882351F080911601815080931601A6
+:1004300080911601882309F45D9A80911701882321
+:1004400051F080911701815080931701809117011D
+:10045000882309F45C9A8FB7F894909122028FBF99
+:10046000992369F08EE991E084DE982F8091C8008D
+:1004700085FFFCCF9093CE005C980093170180E03D
+:1004800091E095D42AD487CFDA01923049F09330A5
+:1004900061F09130F9F4E8E9F0E022E130E01EC0CB
+:1004A000EAEAF0E02EE330E019C0813049F0813013
+:1004B00018F0823079F408C0E8EEF0E0849107C0CB
+:1004C000ECEEF0E0849103C0E0E2F1E08491282FAB
+:1004D00030E004C0E0E0F0E020E030E0ED93FC9399
+:1004E000C901089528E030E040E003C04F5F220FCB
+:1004F000331F28173907D0F3842F8295807F089502
+:100500008093E9008091EB0081608093EB00109272
+:10051000ED006093EC004093ED008091EE00881FA9
+:100520008827881F08951092F40090E09093E900C6
+:100530001092F0001092E8001092ED008091EB0014
+:100540008E7F8093EB009F5F953081F708958091B7
+:10055000270288238CF403C08EB38823B1F08091E6
+:10056000E80082FFF9CF8091E8008B778093E80064
+:1005700008958EB3882349F08091E80080FFF9CF79
+:100580008091E8008E778093E800089594E680914A
+:10059000EC0080FF05C08091E80080FF05C023C00B
+:1005A0008091E80082FD1FC08EB3882311F482E0A1
+:1005B00008958EB3853011F483E008958091EB00A7
+:1005C00085FF02C081E008958091E10082FFDFCFC6
+:1005D0008091E1008B7F8093E100992311F484E006
+:1005E00008959150D4CF80E008959C0140912D0250
+:1005F00050912E024617570718F4F90120E038C031
+:100600006115710511F0AB01F8CF8091E8008E778C
+:100610008093E80040E050E0F0CF8091E80083FF55
+:1006200002C081E008958091E80082FD2DC08EB364
+:10063000882381F18EB3853079F18091E80080FFC5
+:1006400017C09091F20006C081918093F100415053
+:1006500050409F5F4115510511F09830A8F320E0FC
+:10066000983009F421E08091E8008E778093E800CB
+:100670004115510591F6222381F606C08EB38823D9
+:1006800049F08EB3853041F08091E80082FFF6CFCB
+:1006900080E0089582E0089583E008959C014091F0
+:1006A0002D0250912E024617570710F490E03BC0E0
+:1006B0006115710511F0AB01F9CF8091E8008E77DB
+:1006C0008093E80040E050E0F1CF8091E80083FFA4
+:1006D00002C081E008958091E80082FD30C08EB3B1
+:1006E000882399F18EB3853091F18091E80080FFE5
+:1006F0001AC08091F20009C0F9012F5F3F4FE491C9
+:10070000E093F100415050408F5F4115510511F0C9
+:10071000883090F390E0883009F491E08091E8000F
+:100720008E778093E8004115510579F6992369F693
+:1007300006C08EB3882349F08EB3853041F0809196
+:10074000E80082FFF6CF80E0089582E0089583E01C
+:1007500008959C016115710529F48091E8008B775B
+:100760008093E800F90120C08091E80083FF02C077
+:1007700081E008958EB3882339F18EB3853031F14D
+:100780008091E80082FFF0CF06C08091F100819354
+:100790006150704021F08091F2008823B1F7809180
+:1007A000E8008B778093E80061157105E9F606C0D3
+:1007B0008EB3882349F08EB3853041F08091E800F4
+:1007C00080FFF6CF80E0089582E0089583E00895E9
+:1007D00042D044D01EBA10922502109224021092E8
+:1007E000230284E089BD89B5826089BD09B400FE19
+:1007F000FDCF8091D800982F9F779093D800806884
+:100800008093D800809163008E7F809363008091F5
+:10081000D8008F7D8093D8008091E0008E7F8093F8
+:10082000E0008091E1008E7F8093E1008091E20002
+:1008300081608093E2008091E100877F8093E100F6
+:100840008091E20088608093E2000895C1DF81E03A
+:100850008093260208951092E20008951092E1001C
+:1008600008951F920F920FB60F9211241F932F938A
+:100870003F934F935F936F937F938F939F93AF9328
+:10088000BF93EF93FF93E9EEF0E0108117701082B1
+:10089000E0EFF0E08081877F80837894C3D0F89484
+:1008A000A9EEB0E01C92E0EFF0E0808188608083E8
+:1008B0001C93FF91EF91BF91AF919F918F917F9189
+:1008C0006F915F914F913F912F911F910F900FBEAC
+:1008D0000F901F9018951F920F920FB60F92112430
+:1008E0002F933F934F935F936F937F938F939F9338
+:1008F000AF93BF93EF93FF938091E10080FF1BC004
+:100900008091E20080FF17C08091E1008E7F80938C
+:10091000E1008091E2008E7F8093E2008091E2000E
+:1009200080618093E2008091D80080628093D8003B
+:1009300019BC1EBAD1D18091E10084FF29C08091F9
+:10094000E20084FF25C084E089BD89B5826089BD4D
+:1009500009B400FEFDCF8091D8008F7D8093D80030
+:100960008091E1008F7E8093E1008091E2008F7E94
+:100970008093E2008091E20081608093E2008091A8
+:100980002502882311F481E001C084E08EBBA4D14C
+:100990008091E10083FF27C08091E20083FF23C0A4
+:1009A0008091E100877F8093E10082E08EBB10920E
+:1009B00025028091E1008E7F8093E1008091E2002A
+:1009C0008E7F8093E2008091E20080618093E2005C
+:1009D000AADD80E060E042E093DD8091F000886075
+:1009E0008093F00079D18091E10082FF0AC080916C
+:1009F000E20082FF06C08091E1008B7F8093E100DE
+:100A00006BD1FF91EF91BF91AF919F918F917F91AA
+:100A10006F915F914F913F912F910F900FBE0F906B
+:100A20001F9018951F93DF93CF93CDB7DEB7AC9788
+:100A30000FB6F894DEBF0FBECDBFE7E2F2E08091C3
+:100A4000F100819322E0EF32F207C9F7809127028B
+:100A500030912802353009F487C0363040F4313007
+:100A6000C9F1313070F0333009F01DC133C0383076
+:100A700009F4EFC0393009F4FEC0363009F013C173
+:100A800092C0803821F0823809F00DC108C09091E1
+:100A9000230280912402882399F0926011C08091F2
+:100AA0002B0287708093E9008091EB0090E025E0B5
+:100AB000969587952A95E1F7982F91701092E90005
+:100AC0008091E800877F8093E8009093F100109276
+:100AD000F100CAC0882319F0823009F0E4C090E028
+:100AE0008F719070009721F0029709F0DDC00CC063
+:100AF00080912902813009F0D7C01092240233304E
+:100B000069F5809324022AC080912902882331F557
+:100B100020912B02277009F4C7C02093E90080912F
+:100B2000EB0080FFC1C0333021F48091EB00806284
+:100B300013C08091EB0080618093EB0081E090E036
+:100B400002C0880F991F2A95E2F78093EA0010925D
+:100B5000EA008091EB0088608093EB001092E9003E
+:100B60008091E800877F83C0882309F09CC01091A2
+:100B700029028091E800877F8093E800E8DC04C0C8
+:100B80008EB3882309F490C08091E80080FFF8CFED
+:100B9000812F8F7711F492E001C093E09EBB8068B3
+:100BA0008093E30081C08058823008F07CC080913F
+:100BB000290290912A0223E08C3D920799F55FB7B4
+:100BC000F894DE0115964EE020E030E061E2E42F7B
+:100BD000F0E060935700849120FF03C082958F70EE
+:100BE0004F5F982F9F70892F805D8A3308F0895F4F
+:100BF0008C9311961C9211972F5F3F4F12962431C0
+:100C0000310529F75FBF8AE28B8383E08C83809173
+:100C1000E800877F8093E800CE0103966AE270E0E7
+:100C2000E4DC11C060912B02AE014F5F5F4F2CDC02
+:100C3000BC010097C9F18091E800877F8093E800AC
+:100C400089819A812BDD8091E8008B778093E80081
+:100C50002BC0803841F58091E800877F8093E800C1
+:100C6000809125028093F1008091E8008E77809337
+:100C7000E8006DDC19C08823B1F49091290292300C
+:100C800098F48091E800877F8093E8009093250294
+:100C90005EDC80912502882311F483E001C084E0AA
+:100CA0008EBB2DDB01C028DB8091E80083FF0AC0EA
+:100CB0008091EB0080628093EB008091E800877F59
+:100CC0008093E800AC960FB6F894DEBF0FBECDBFA0
+:100CD000CF91DF911F91089508951F938EB38823BC
+:100CE00061F01091E9001092E9008091E80083FF23
+:100CF00001C098DE17701093E9001F9108950895C0
+:100D0000FC018EB3843021F587859089A189B28951
+:100D10000097A105B105E1F085818093E9008091FC
+:100D2000E80082FF15C08091F200882319F42FEFAC
+:100D30003FEF04C08091F100282F30E08091F20055
+:100D4000882341F48091E8008B778093E80002C00B
+:100D50002FEF3FEFC9010895FC018EB3843011F5E8
+:100D600087859089A189B2890097A105B105D1F045
+:100D700081818093E9008091F2008823A9F090910D
+:100D8000E8008091E8008E778093E80095FD0CC024
+:100D9000FDDB982F882349F48091E8008E778093BB
+:100DA000E80003C092E001C090E0892F0895FC01A3
+:100DB0008EB3843051F487859089A189B2890097D8
+:100DC000A105B10511F0CF01C7CF08951F93FC0114
+:100DD000162F8EB38430D9F487859089A189B28982
+:100DE0000097A105B10599F081818093E900809178
+:100DF000E80085FD08C08091E8008E778093E800C8
+:100E0000C5DB882329F41093F10080E001C082E063
+:100E10001F9108950F931F93CF93DF93EC010D96CD
+:100E2000FC0189E0DF011D928A95E9F72A813B8167
+:100E300009818C81882311F410E001C014E0C901FC
+:100E400051DB182B1260802F61E8412F59DB88237A
+:100E500029F12E813F810D818885882311F410E0CE
+:100E600001C014E0C9013EDB182B1260802F60E83E
+:100E7000412F46DB882391F02A853B8509858C85A7
+:100E8000882311F410E001C014E0C9012BDB182BFA
+:100E90001260802F61EC412F33DB01C080E0DF91D5
+:100EA000CF911F910F910895CF93DF93EC01809123
+:100EB000E80083FF60C0888190E020912B02309190
+:100EC0002C022817390709F056C080912802813278
+:100ED00061F0823220F4803209F04DC019C08232B4
+:100EE00069F1833209F047C038C080912702813A06
+:100EF00009F041C08091E800877F8093E800CE012F
+:100F00000F9667E070E071DB8091E8008B7713C08B
+:100F100080912702813279F58091E800877F809364
+:100F2000E800CE010F9667E070E013DCCE013ED9F9
+:100F30008091E8008E778093E8001DC080912702A1
+:100F40008132C9F48091E800877F8093E800809126
+:100F500029028D87CE01C8D90DC080912702813228
+:100F600051F48091E800877F8093E800CE01609182
+:100F70002902C5DEECDADF91CF910895A1E21A2EA5
+:100F8000AA1BBB1BFD010DC0AA1FBB1FEE1FFF1F2D
+:100F9000A217B307E407F50720F0A21BB30BE40B7D
+:100FA000F50B661F771F881F991F1A9469F76095C4
+:100FB0007095809590959B01AC01BD01CF0108957E
+:040FC000F894FFCFD3
+:100FC400000340000004400000020800000000008C
+:060FD40000000000000017
+:00000001FF
diff --git a/test/ardmake/hardware/firmwares/arduino-usbserial/Arduino-usbserial.c b/test/ardmake/hardware/firmwares/arduino-usbserial/Arduino-usbserial.c new file mode 100644 index 0000000..4de73c8 --- /dev/null +++ b/test/ardmake/hardware/firmwares/arduino-usbserial/Arduino-usbserial.c @@ -0,0 +1,242 @@ +/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2010.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.fourwalledcubicle.com
+*/
+
+/*
+ Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ *
+ * Main source file for the Arduino-usbserial project. This file contains the main tasks of
+ * the project and is responsible for the initial application hardware configuration.
+ */
+
+#include "Arduino-usbserial.h"
+
+/** Circular buffer to hold data from the host before it is sent to the device via the serial port. */
+RingBuff_t USBtoUSART_Buffer;
+
+/** Circular buffer to hold data from the serial port before it is sent to the host. */
+RingBuff_t USARTtoUSB_Buffer;
+
+/** Pulse generation counters to keep track of the number of milliseconds remaining for each pulse type */
+volatile struct
+{
+ uint8_t TxLEDPulse; /**< Milliseconds remaining for data Tx LED pulse */
+ uint8_t RxLEDPulse; /**< Milliseconds remaining for data Rx LED pulse */
+ uint8_t PingPongLEDPulse; /**< Milliseconds remaining for enumeration Tx/Rx ping-pong LED pulse */
+} PulseMSRemaining;
+
+/** LUFA CDC Class driver interface configuration and state information. This structure is
+ * passed to all CDC Class driver functions, so that multiple instances of the same class
+ * within a device can be differentiated from one another.
+ */
+USB_ClassInfo_CDC_Device_t VirtualSerial_CDC_Interface =
+ {
+ .Config =
+ {
+ .ControlInterfaceNumber = 0,
+
+ .DataINEndpointNumber = CDC_TX_EPNUM,
+ .DataINEndpointSize = CDC_TXRX_EPSIZE,
+ .DataINEndpointDoubleBank = false,
+
+ .DataOUTEndpointNumber = CDC_RX_EPNUM,
+ .DataOUTEndpointSize = CDC_TXRX_EPSIZE,
+ .DataOUTEndpointDoubleBank = false,
+
+ .NotificationEndpointNumber = CDC_NOTIFICATION_EPNUM,
+ .NotificationEndpointSize = CDC_NOTIFICATION_EPSIZE,
+ .NotificationEndpointDoubleBank = false,
+ },
+ };
+
+/** Main program entry point. This routine contains the overall program flow, including initial
+ * setup of all components and the main program loop.
+ */
+int main(void)
+{
+ SetupHardware();
+
+ RingBuffer_InitBuffer(&USBtoUSART_Buffer);
+ RingBuffer_InitBuffer(&USARTtoUSB_Buffer);
+
+ sei();
+
+ for (;;)
+ {
+ /* Only try to read in bytes from the CDC interface if the transmit buffer is not full */
+ if (!(RingBuffer_IsFull(&USBtoUSART_Buffer)))
+ {
+ int16_t ReceivedByte = CDC_Device_ReceiveByte(&VirtualSerial_CDC_Interface);
+
+ /* Read bytes from the USB OUT endpoint into the USART transmit buffer */
+ if (!(ReceivedByte < 0))
+ RingBuffer_Insert(&USBtoUSART_Buffer, ReceivedByte);
+ }
+
+ /* Check if the UART receive buffer flush timer has expired or the buffer is nearly full */
+ RingBuff_Count_t BufferCount = RingBuffer_GetCount(&USARTtoUSB_Buffer);
+ if ((TIFR0 & (1 << TOV0)) || (BufferCount > BUFFER_NEARLY_FULL))
+ {
+ TIFR0 |= (1 << TOV0);
+
+ if (USARTtoUSB_Buffer.Count) {
+ LEDs_TurnOnLEDs(LEDMASK_TX);
+ PulseMSRemaining.TxLEDPulse = TX_RX_LED_PULSE_MS;
+ }
+
+ /* Read bytes from the USART receive buffer into the USB IN endpoint */
+ while (BufferCount--)
+ CDC_Device_SendByte(&VirtualSerial_CDC_Interface, RingBuffer_Remove(&USARTtoUSB_Buffer));
+
+ /* Turn off TX LED(s) once the TX pulse period has elapsed */
+ if (PulseMSRemaining.TxLEDPulse && !(--PulseMSRemaining.TxLEDPulse))
+ LEDs_TurnOffLEDs(LEDMASK_TX);
+
+ /* Turn off RX LED(s) once the RX pulse period has elapsed */
+ if (PulseMSRemaining.RxLEDPulse && !(--PulseMSRemaining.RxLEDPulse))
+ LEDs_TurnOffLEDs(LEDMASK_RX);
+ }
+
+ /* Load the next byte from the USART transmit buffer into the USART */
+ if (!(RingBuffer_IsEmpty(&USBtoUSART_Buffer))) {
+ Serial_TxByte(RingBuffer_Remove(&USBtoUSART_Buffer));
+
+ LEDs_TurnOnLEDs(LEDMASK_RX);
+ PulseMSRemaining.RxLEDPulse = TX_RX_LED_PULSE_MS;
+ }
+
+ CDC_Device_USBTask(&VirtualSerial_CDC_Interface);
+ USB_USBTask();
+ }
+}
+
+/** Configures the board hardware and chip peripherals for the demo's functionality. */
+void SetupHardware(void)
+{
+ /* Disable watchdog if enabled by bootloader/fuses */
+ MCUSR &= ~(1 << WDRF);
+ wdt_disable();
+
+ /* Hardware Initialization */
+ Serial_Init(9600, false);
+ LEDs_Init();
+ USB_Init();
+
+ /* Start the flush timer so that overflows occur rapidly to push received bytes to the USB interface */
+ TCCR0B = (1 << CS02);
+
+ /* Pull target /RESET line high */
+ AVR_RESET_LINE_PORT |= AVR_RESET_LINE_MASK;
+ AVR_RESET_LINE_DDR |= AVR_RESET_LINE_MASK;
+}
+
+/** Event handler for the library USB Configuration Changed event. */
+void EVENT_USB_Device_ConfigurationChanged(void)
+{
+ CDC_Device_ConfigureEndpoints(&VirtualSerial_CDC_Interface);
+}
+
+/** Event handler for the library USB Unhandled Control Request event. */
+void EVENT_USB_Device_UnhandledControlRequest(void)
+{
+ CDC_Device_ProcessControlRequest(&VirtualSerial_CDC_Interface);
+}
+
+/** Event handler for the CDC Class driver Line Encoding Changed event.
+ *
+ * \param[in] CDCInterfaceInfo Pointer to the CDC class interface configuration structure being referenced
+ */
+void EVENT_CDC_Device_LineEncodingChanged(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo)
+{
+ uint8_t ConfigMask = 0;
+
+ switch (CDCInterfaceInfo->State.LineEncoding.ParityType)
+ {
+ case CDC_PARITY_Odd:
+ ConfigMask = ((1 << UPM11) | (1 << UPM10));
+ break;
+ case CDC_PARITY_Even:
+ ConfigMask = (1 << UPM11);
+ break;
+ }
+
+ if (CDCInterfaceInfo->State.LineEncoding.CharFormat == CDC_LINEENCODING_TwoStopBits)
+ ConfigMask |= (1 << USBS1);
+
+ switch (CDCInterfaceInfo->State.LineEncoding.DataBits)
+ {
+ case 6:
+ ConfigMask |= (1 << UCSZ10);
+ break;
+ case 7:
+ ConfigMask |= (1 << UCSZ11);
+ break;
+ case 8:
+ ConfigMask |= ((1 << UCSZ11) | (1 << UCSZ10));
+ break;
+ }
+
+ /* Must turn off USART before reconfiguring it, otherwise incorrect operation may occur */
+ UCSR1B = 0;
+ UCSR1A = 0;
+ UCSR1C = 0;
+
+ /* Special case 57600 baud for compatibility with the ATmega328 bootloader. */
+ UBRR1 = (CDCInterfaceInfo->State.LineEncoding.BaudRateBPS == 57600)
+ ? SERIAL_UBBRVAL(CDCInterfaceInfo->State.LineEncoding.BaudRateBPS)
+ : SERIAL_2X_UBBRVAL(CDCInterfaceInfo->State.LineEncoding.BaudRateBPS);
+
+ UCSR1C = ConfigMask;
+ UCSR1A = (CDCInterfaceInfo->State.LineEncoding.BaudRateBPS == 57600) ? 0 : (1 << U2X1);
+ UCSR1B = ((1 << RXCIE1) | (1 << TXEN1) | (1 << RXEN1));
+}
+
+/** ISR to manage the reception of data from the serial port, placing received bytes into a circular buffer
+ * for later transmission to the host.
+ */
+ISR(USART1_RX_vect, ISR_BLOCK)
+{
+ uint8_t ReceivedByte = UDR1;
+
+ if (USB_DeviceState == DEVICE_STATE_Configured)
+ RingBuffer_Insert(&USARTtoUSB_Buffer, ReceivedByte);
+}
+
+/** Event handler for the CDC Class driver Host-to-Device Line Encoding Changed event.
+ *
+ * \param[in] CDCInterfaceInfo Pointer to the CDC class interface configuration structure being referenced
+ */
+void EVENT_CDC_Device_ControLineStateChanged(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo)
+{
+ bool CurrentDTRState = (CDCInterfaceInfo->State.ControlLineStates.HostToDevice & CDC_CONTROL_LINE_OUT_DTR);
+
+ if (CurrentDTRState)
+ AVR_RESET_LINE_PORT &= ~AVR_RESET_LINE_MASK;
+ else
+ AVR_RESET_LINE_PORT |= AVR_RESET_LINE_MASK;
+}
diff --git a/test/ardmake/hardware/firmwares/arduino-usbserial/Arduino-usbserial.h b/test/ardmake/hardware/firmwares/arduino-usbserial/Arduino-usbserial.h new file mode 100644 index 0000000..99fde39 --- /dev/null +++ b/test/ardmake/hardware/firmwares/arduino-usbserial/Arduino-usbserial.h @@ -0,0 +1,79 @@ +/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2010.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.fourwalledcubicle.com
+*/
+
+/*
+ Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ *
+ * Header file for Arduino-usbserial.c.
+ */
+
+#ifndef _ARDUINO_USBSERIAL_H_
+#define _ARDUINO_USBSERIAL_H_
+
+ /* Includes: */
+ #include <avr/io.h>
+ #include <avr/wdt.h>
+ #include <avr/interrupt.h>
+ #include <avr/power.h>
+
+ #include "Descriptors.h"
+
+ #include "Lib/LightweightRingBuff.h"
+
+ #include <LUFA/Version.h>
+ #include <LUFA/Drivers/Board/LEDs.h>
+ #include <LUFA/Drivers/Peripheral/Serial.h>
+ #include <LUFA/Drivers/USB/USB.h>
+ #include <LUFA/Drivers/USB/Class/CDC.h>
+
+ /* Macros: */
+ /** LED mask for the library LED driver, to indicate TX activity. */
+ #define LEDMASK_TX LEDS_LED1
+
+ /** LED mask for the library LED driver, to indicate RX activity. */
+ #define LEDMASK_RX LEDS_LED2
+
+ /** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
+ #define LEDMASK_ERROR (LEDS_LED1 | LEDS_LED2)
+
+ /** LED mask for the library LED driver, to indicate that the USB interface is busy. */
+ #define LEDMASK_BUSY (LEDS_LED1 | LEDS_LED2)
+
+ /* Function Prototypes: */
+ void SetupHardware(void);
+
+ void EVENT_USB_Device_Connect(void);
+ void EVENT_USB_Device_Disconnect(void);
+ void EVENT_USB_Device_ConfigurationChanged(void);
+ void EVENT_USB_Device_UnhandledControlRequest(void);
+
+ void EVENT_CDC_Device_LineEncodingChanged(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo);
+ void EVENT_CDC_Device_ControLineStateChanged(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo);
+
+#endif /* _ARDUINO_USBSERIAL_H_ */
diff --git a/test/ardmake/hardware/firmwares/arduino-usbserial/Board/LEDs.h b/test/ardmake/hardware/firmwares/arduino-usbserial/Board/LEDs.h new file mode 100644 index 0000000..152e8f5 --- /dev/null +++ b/test/ardmake/hardware/firmwares/arduino-usbserial/Board/LEDs.h @@ -0,0 +1,110 @@ +/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2010.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.fourwalledcubicle.com
+*/
+
+/*
+ Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/*
+ Board LEDs driver for the Benito board, from www.dorkbotpdx.org.
+*/
+
+#ifndef __LEDS_ARDUINOUNO_H__
+#define __LEDS_ARDUINOUNO_H__
+
+ /* Includes: */
+ #include <avr/io.h>
+
+/* Enable C linkage for C++ Compilers: */
+ #if defined(__cplusplus)
+ extern "C" {
+ #endif
+
+ /* Preprocessor Checks: */
+ #if !defined(INCLUDE_FROM_LEDS_H)
+ #error Do not include this file directly. Include LUFA/Drivers/Board/LEDS.h instead.
+ #endif
+
+ /* Public Interface - May be used in end-application: */
+ /* Macros: */
+ /** LED mask for the first LED on the board. */
+ #define LEDS_LED1 (1 << 5)
+
+ /** LED mask for the second LED on the board. */
+ #define LEDS_LED2 (1 << 4)
+
+ /** LED mask for all the LEDs on the board. */
+ #define LEDS_ALL_LEDS (LEDS_LED1 | LEDS_LED2)
+
+ /** LED mask for the none of the board LEDs */
+ #define LEDS_NO_LEDS 0
+
+ /* Inline Functions: */
+ #if !defined(__DOXYGEN__)
+ static inline void LEDs_Init(void)
+ {
+ DDRD |= LEDS_ALL_LEDS;
+ PORTD |= LEDS_ALL_LEDS;
+ }
+
+ static inline void LEDs_TurnOnLEDs(const uint8_t LEDMask)
+ {
+ PORTD &= ~LEDMask;
+ }
+
+ static inline void LEDs_TurnOffLEDs(const uint8_t LEDMask)
+ {
+ PORTD |= LEDMask;
+ }
+
+ static inline void LEDs_SetAllLEDs(const uint8_t LEDMask)
+ {
+ PORTD = ((PORTD | LEDS_ALL_LEDS) & ~LEDMask);
+ }
+
+ static inline void LEDs_ChangeLEDs(const uint8_t LEDMask, const uint8_t ActiveMask)
+ {
+ PORTD = ((PORTD | ActiveMask) & ~LEDMask);
+ }
+
+ static inline void LEDs_ToggleLEDs(const uint8_t LEDMask)
+ {
+ PORTD ^= LEDMask;
+ }
+
+ static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT;
+ static inline uint8_t LEDs_GetLEDs(void)
+ {
+ return (PORTD & LEDS_ALL_LEDS);
+ }
+ #endif
+
+ /* Disable C linkage for C++ Compilers: */
+ #if defined(__cplusplus)
+ }
+ #endif
+
+#endif
diff --git a/test/ardmake/hardware/firmwares/arduino-usbserial/Descriptors.c b/test/ardmake/hardware/firmwares/arduino-usbserial/Descriptors.c new file mode 100644 index 0000000..705dddf --- /dev/null +++ b/test/ardmake/hardware/firmwares/arduino-usbserial/Descriptors.c @@ -0,0 +1,277 @@ +/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2010.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.fourwalledcubicle.com
+*/
+
+/*
+ Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ *
+ * USB Device Descriptors, for library use when in USB device mode. Descriptors are special
+ * computer-readable structures which the host requests upon device enumeration, to determine
+ * the device's capabilities and functions.
+ */
+
+#include "Descriptors.h"
+
+/* On some devices, there is a factory set internal serial number which can be automatically sent to the host as
+ * the device's serial number when the Device Descriptor's .SerialNumStrIndex entry is set to USE_INTERNAL_SERIAL.
+ * This allows the host to track a device across insertions on different ports, allowing them to retain allocated
+ * resources like COM port numbers and drivers. On demos using this feature, give a warning on unsupported devices
+ * so that the user can supply their own serial number descriptor instead or remove the USE_INTERNAL_SERIAL value
+ * from the Device Descriptor (forcing the host to generate a serial number for each device from the VID, PID and
+ * port location).
+ */
+#if (USE_INTERNAL_SERIAL == NO_DESCRIPTOR)
+ #warning USE_INTERNAL_SERIAL is not available on this AVR - please manually construct a device serial descriptor.
+#endif
+
+/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
+ * device characteristics, including the supported USB version, control endpoint size and the
+ * number of device configurations. The descriptor is read out by the USB host when the enumeration
+ * process begins.
+ */
+USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
+{
+ .Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
+
+ .USBSpecification = VERSION_BCD(01.10),
+ .Class = 0x02,
+ .SubClass = 0x00,
+ .Protocol = 0x00,
+
+ .Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE,
+
+ .VendorID = 0x03EB, // Atmel
+
+ .ProductID = 0x204B, // LUFA USB to Serial Demo Application
+ .ReleaseNumber = 0x0001,
+
+ .ManufacturerStrIndex = 0x01,
+ .ProductStrIndex = 0x02,
+ .SerialNumStrIndex = USE_INTERNAL_SERIAL,
+
+ .NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
+};
+
+/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
+ * of the device in one of its supported configurations, including information about any device interfaces
+ * and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
+ * a configuration so that the host may correctly communicate with the USB device.
+ */
+USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
+{
+ .Config =
+ {
+ .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
+
+ .TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
+ .TotalInterfaces = 2,
+
+ .ConfigurationNumber = 1,
+ .ConfigurationStrIndex = NO_DESCRIPTOR,
+
+ .ConfigAttributes = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED),
+
+ .MaxPowerConsumption = USB_CONFIG_POWER_MA(100)
+ },
+
+ .CDC_CCI_Interface =
+ {
+ .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+ .InterfaceNumber = 0,
+ .AlternateSetting = 0,
+
+ .TotalEndpoints = 1,
+
+ .Class = 0x02,
+ .SubClass = 0x02,
+ .Protocol = 0x01,
+
+ .InterfaceStrIndex = NO_DESCRIPTOR
+ },
+
+ .CDC_Functional_IntHeader =
+ {
+ .Header = {.Size = sizeof(CDC_FUNCTIONAL_DESCRIPTOR(2)), .Type = 0x24},
+ .SubType = 0x00,
+
+ .Data = {0x01, 0x10}
+ },
+
+ .CDC_Functional_AbstractControlManagement =
+ {
+ .Header = {.Size = sizeof(CDC_FUNCTIONAL_DESCRIPTOR(1)), .Type = 0x24},
+ .SubType = 0x02,
+
+ .Data = {0x06}
+ },
+
+ .CDC_Functional_Union =
+ {
+ .Header = {.Size = sizeof(CDC_FUNCTIONAL_DESCRIPTOR(2)), .Type = 0x24},
+ .SubType = 0x06,
+
+ .Data = {0x00, 0x01}
+ },
+
+ .CDC_NotificationEndpoint =
+ {
+ .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+ .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC_NOTIFICATION_EPNUM),
+ .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+ .EndpointSize = CDC_NOTIFICATION_EPSIZE,
+ .PollingIntervalMS = 0xFF
+ },
+
+ .CDC_DCI_Interface =
+ {
+ .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+ .InterfaceNumber = 1,
+ .AlternateSetting = 0,
+
+ .TotalEndpoints = 2,
+
+ .Class = 0x0A,
+ .SubClass = 0x00,
+ .Protocol = 0x00,
+
+ .InterfaceStrIndex = NO_DESCRIPTOR
+ },
+
+ .CDC_DataOutEndpoint =
+ {
+ .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+ .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_OUT | CDC_RX_EPNUM),
+ .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+ .EndpointSize = CDC_TXRX_EPSIZE,
+ .PollingIntervalMS = 0x01
+ },
+
+ .CDC_DataInEndpoint =
+ {
+ .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+ .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC_TX_EPNUM),
+ .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+ .EndpointSize = CDC_TXRX_EPSIZE,
+ .PollingIntervalMS = 0x01
+ }
+};
+
+/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
+ * the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
+ * via the language ID table available at USB.org what languages the device supports for its string descriptors.
+ */
+USB_Descriptor_String_t PROGMEM LanguageString =
+{
+ .Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String},
+
+ .UnicodeString = {LANGUAGE_ID_ENG}
+};
+
+/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
+ * form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ * Descriptor.
+ */
+USB_Descriptor_String_t PROGMEM ManufacturerString =
+{
+ .Header = {.Size = USB_STRING_LEN(24), .Type = DTYPE_String},
+
+ .UnicodeString = L"Arduino (www.arduino.cc)"
+};
+
+/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
+ * and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ * Descriptor.
+ */
+USB_Descriptor_String_t PROGMEM ProductString =
+{
+ #if (ARDUINO_MODEL_PID == ARDUINO_UNO_PID)
+ .Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String},
+
+ .UnicodeString = L"Arduino Uno"
+ #elif (ARDUINO_MODEL_PID == ARDUINO_MEGA2560_PID)
+ .Header = {.Size = USB_STRING_LEN(17), .Type = DTYPE_String},
+
+ .UnicodeString = L"Arduino Mega 2560"
+ #endif
+
+};
+
+/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
+ * documentation) by the application code so that the address and size of a requested descriptor can be given
+ * to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
+ * is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
+ * USB host.
+ */
+uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+ const uint8_t wIndex,
+ void** const DescriptorAddress)
+{
+ const uint8_t DescriptorType = (wValue >> 8);
+ const uint8_t DescriptorNumber = (wValue & 0xFF);
+
+ void* Address = NULL;
+ uint16_t Size = NO_DESCRIPTOR;
+
+ switch (DescriptorType)
+ {
+ case DTYPE_Device:
+ Address = (void*)&DeviceDescriptor;
+ Size = sizeof(USB_Descriptor_Device_t);
+ break;
+ case DTYPE_Configuration:
+ Address = (void*)&ConfigurationDescriptor;
+ Size = sizeof(USB_Descriptor_Configuration_t);
+ break;
+ case DTYPE_String:
+ switch (DescriptorNumber)
+ {
+ case 0x00:
+ Address = (void*)&LanguageString;
+ Size = pgm_read_byte(&LanguageString.Header.Size);
+ break;
+ case 0x01:
+ Address = (void*)&ManufacturerString;
+ Size = pgm_read_byte(&ManufacturerString.Header.Size);
+ break;
+ case 0x02:
+ Address = (void*)&ProductString;
+ Size = pgm_read_byte(&ProductString.Header.Size);
+ break;
+ }
+
+ break;
+ }
+
+ *DescriptorAddress = Address;
+ return Size;
+}
diff --git a/test/ardmake/hardware/firmwares/arduino-usbserial/Descriptors.h b/test/ardmake/hardware/firmwares/arduino-usbserial/Descriptors.h new file mode 100644 index 0000000..3ac4e52 --- /dev/null +++ b/test/ardmake/hardware/firmwares/arduino-usbserial/Descriptors.h @@ -0,0 +1,88 @@ +/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2010.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.fourwalledcubicle.com
+*/
+
+/*
+ Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ *
+ * Header file for Descriptors.c.
+ */
+
+#ifndef _DESCRIPTORS_H_
+#define _DESCRIPTORS_H_
+
+ /* Includes: */
+ #include <avr/pgmspace.h>
+
+ #include <LUFA/Drivers/USB/USB.h>
+ #include <LUFA/Drivers/USB/Class/CDC.h>
+
+ /* Product-specific definitions: */
+ #define ARDUINO_UNO_PID 0x0001
+ #define ARDUINO_MEGA2560_PID 0x0010
+
+ /* Macros: */
+ /** Endpoint number of the CDC device-to-host notification IN endpoint. */
+ #define CDC_NOTIFICATION_EPNUM 2
+
+ /** Endpoint number of the CDC device-to-host data IN endpoint. */
+ #define CDC_TX_EPNUM 3
+
+ /** Endpoint number of the CDC host-to-device data OUT endpoint. */
+ #define CDC_RX_EPNUM 4
+
+ /** Size in bytes of the CDC device-to-host notification IN endpoint. */
+ #define CDC_NOTIFICATION_EPSIZE 8
+
+ /** Size in bytes of the CDC data IN and OUT endpoints. */
+ #define CDC_TXRX_EPSIZE 64
+
+ /* Type Defines: */
+ /** Type define for the device configuration descriptor structure. This must be defined in the
+ * application code, as the configuration descriptor contains several sub-descriptors which
+ * vary between devices, and which describe the device's usage to the host.
+ */
+ typedef struct
+ {
+ USB_Descriptor_Configuration_Header_t Config;
+ USB_Descriptor_Interface_t CDC_CCI_Interface;
+ CDC_FUNCTIONAL_DESCRIPTOR(2) CDC_Functional_IntHeader;
+ CDC_FUNCTIONAL_DESCRIPTOR(1) CDC_Functional_AbstractControlManagement;
+ CDC_FUNCTIONAL_DESCRIPTOR(2) CDC_Functional_Union;
+ USB_Descriptor_Endpoint_t CDC_NotificationEndpoint;
+ USB_Descriptor_Interface_t CDC_DCI_Interface;
+ USB_Descriptor_Endpoint_t CDC_DataOutEndpoint;
+ USB_Descriptor_Endpoint_t CDC_DataInEndpoint;
+ } USB_Descriptor_Configuration_t;
+
+ /* Function Prototypes: */
+ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+ const uint8_t wIndex,
+ void** const DescriptorAddress) ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
+
+#endif
diff --git a/test/ardmake/hardware/firmwares/arduino-usbserial/Lib/LightweightRingBuff.h b/test/ardmake/hardware/firmwares/arduino-usbserial/Lib/LightweightRingBuff.h new file mode 100644 index 0000000..fb48c1f --- /dev/null +++ b/test/ardmake/hardware/firmwares/arduino-usbserial/Lib/LightweightRingBuff.h @@ -0,0 +1,197 @@ +/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2010.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.fourwalledcubicle.com
+*/
+
+/*
+ Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ *
+ * Ultra lightweight ring buffer, for fast insertion/deletion.
+ */
+
+#ifndef _ULW_RING_BUFF_H_
+#define _ULW_RING_BUFF_H_
+
+ /* Includes: */
+ #include <util/atomic.h>
+
+ #include <stdint.h>
+ #include <stdbool.h>
+
+ /* Defines: */
+ /** Size of each ring buffer, in data elements - must be between 1 and 255. */
+ #define BUFFER_SIZE 128
+
+ /** Maximum number of data elements to buffer before forcing a flush.
+ * Must be less than BUFFER_SIZE
+ */
+ #define BUFFER_NEARLY_FULL 96
+
+ /** Type of data to store into the buffer. */
+ #define RingBuff_Data_t uint8_t
+
+ /** Datatype which may be used to store the count of data stored in a buffer, retrieved
+ * via a call to \ref RingBuffer_GetCount().
+ */
+ #if (BUFFER_SIZE <= 0xFF)
+ #define RingBuff_Count_t uint8_t
+ #else
+ #define RingBuff_Count_t uint16_t
+ #endif
+
+ /* Type Defines: */
+ /** Type define for a new ring buffer object. Buffers should be initialized via a call to
+ * \ref RingBuffer_InitBuffer() before use.
+ */
+ typedef struct
+ {
+ RingBuff_Data_t Buffer[BUFFER_SIZE]; /**< Internal ring buffer data, referenced by the buffer pointers. */
+ RingBuff_Data_t* In; /**< Current storage location in the circular buffer */
+ RingBuff_Data_t* Out; /**< Current retrieval location in the circular buffer */
+ RingBuff_Count_t Count;
+ } RingBuff_t;
+
+ /* Inline Functions: */
+ /** Initializes a ring buffer ready for use. Buffers must be initialized via this function
+ * before any operations are called upon them. Already initialized buffers may be reset
+ * by re-initializing them using this function.
+ *
+ * \param[out] Buffer Pointer to a ring buffer structure to initialize
+ */
+ static inline void RingBuffer_InitBuffer(RingBuff_t* const Buffer)
+ {
+ ATOMIC_BLOCK(ATOMIC_RESTORESTATE)
+ {
+ Buffer->In = Buffer->Buffer;
+ Buffer->Out = Buffer->Buffer;
+ }
+ }
+
+ /** Retrieves the minimum number of bytes stored in a particular buffer. This value is computed
+ * by entering an atomic lock on the buffer while the IN and OUT locations are fetched, so that
+ * the buffer cannot be modified while the computation takes place. This value should be cached
+ * when reading out the contents of the buffer, so that as small a time as possible is spent
+ * in an atomic lock.
+ *
+ * \note The value returned by this function is guaranteed to only be the minimum number of bytes
+ * stored in the given buffer; this value may change as other threads write new data and so
+ * the returned number should be used only to determine how many successive reads may safely
+ * be performed on the buffer.
+ *
+ * \param[in] Buffer Pointer to a ring buffer structure whose count is to be computed
+ */
+ static inline RingBuff_Count_t RingBuffer_GetCount(RingBuff_t* const Buffer)
+ {
+ RingBuff_Count_t Count;
+
+ ATOMIC_BLOCK(ATOMIC_RESTORESTATE)
+ {
+ Count = Buffer->Count;
+ }
+
+ return Count;
+ }
+
+ /** Atomically determines if the specified ring buffer contains any free space. This should
+ * be tested before storing data to the buffer, to ensure that no data is lost due to a
+ * buffer overrun.
+ *
+ * \param[in,out] Buffer Pointer to a ring buffer structure to insert into
+ *
+ * \return Boolean true if the buffer contains no free space, false otherwise
+ */
+ static inline bool RingBuffer_IsFull(RingBuff_t* const Buffer)
+ {
+ return (RingBuffer_GetCount(Buffer) == BUFFER_SIZE);
+ }
+
+ /** Atomically determines if the specified ring buffer contains any data. This should
+ * be tested before removing data from the buffer, to ensure that the buffer does not
+ * underflow.
+ *
+ * If the data is to be removed in a loop, store the total number of bytes stored in the
+ * buffer (via a call to the \ref RingBuffer_GetCount() function) in a temporary variable
+ * to reduce the time spent in atomicity locks.
+ *
+ * \param[in,out] Buffer Pointer to a ring buffer structure to insert into
+ *
+ * \return Boolean true if the buffer contains no free space, false otherwise
+ */
+ static inline bool RingBuffer_IsEmpty(RingBuff_t* const Buffer)
+ {
+ return (RingBuffer_GetCount(Buffer) == 0);
+ }
+
+ /** Inserts an element into the ring buffer.
+ *
+ * \note Only one execution thread (main program thread or an ISR) may insert into a single buffer
+ * otherwise data corruption may occur. Insertion and removal may occur from different execution
+ * threads.
+ *
+ * \param[in,out] Buffer Pointer to a ring buffer structure to insert into
+ * \param[in] Data Data element to insert into the buffer
+ */
+ static inline void RingBuffer_Insert(RingBuff_t* const Buffer,
+ const RingBuff_Data_t Data)
+ {
+ *Buffer->In = Data;
+
+ if (++Buffer->In == &Buffer->Buffer[BUFFER_SIZE])
+ Buffer->In = Buffer->Buffer;
+
+ ATOMIC_BLOCK(ATOMIC_RESTORESTATE)
+ {
+ Buffer->Count++;
+ }
+ }
+
+ /** Removes an element from the ring buffer.
+ *
+ * \note Only one execution thread (main program thread or an ISR) may remove from a single buffer
+ * otherwise data corruption may occur. Insertion and removal may occur from different execution
+ * threads.
+ *
+ * \param[in,out] Buffer Pointer to a ring buffer structure to retrieve from
+ *
+ * \return Next data element stored in the buffer
+ */
+ static inline RingBuff_Data_t RingBuffer_Remove(RingBuff_t* const Buffer)
+ {
+ RingBuff_Data_t Data = *Buffer->Out;
+
+ if (++Buffer->Out == &Buffer->Buffer[BUFFER_SIZE])
+ Buffer->Out = Buffer->Buffer;
+
+ ATOMIC_BLOCK(ATOMIC_RESTORESTATE)
+ {
+ Buffer->Count--;
+ }
+
+ return Data;
+ }
+
+#endif
diff --git a/test/ardmake/hardware/firmwares/arduino-usbserial/makefile b/test/ardmake/hardware/firmwares/arduino-usbserial/makefile new file mode 100644 index 0000000..79d6be2 --- /dev/null +++ b/test/ardmake/hardware/firmwares/arduino-usbserial/makefile @@ -0,0 +1,776 @@ +# Hey Emacs, this is a -*- makefile -*-
+#----------------------------------------------------------------------------
+# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.
+# >> Modified for use with the LUFA project. <<
+#
+# Released to the Public Domain
+#
+# Additional material for this makefile was written by:
+# Peter Fleury
+# Tim Henigan
+# Colin O'Flynn
+# Reiner Patommel
+# Markus Pfaff
+# Sander Pool
+# Frederik Rouleau
+# Carlos Lamas
+# Dean Camera
+# Opendous Inc.
+# Denver Gingerich
+#
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device, using avrdude.
+# Please customize the avrdude settings below first!
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+# have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+# have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+# (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+# (must have Atmel FLIP installed).
+#
+# make doxygen = Generate DoxyGen documentation for the project (must have
+# DoxyGen installed)
+#
+# make debug = Start either simulavr or avarice as specified for debugging,
+# with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+# bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# MCU name(s)
+# Since the ATMEGA8U2 part is not directly supported by the current
+# versions of either avrdude or dfu-programmer, we specify a dummy
+# part; AT90USB82 which is close enough in memory size and organization
+MCU = atmega8u2
+MCU_AVRDUDE = at90usb82
+MCU_DFU = at90usb82
+
+# Specify the Arduino model using the assigned PID. This is used by Descriptors.c
+# to set PID and product descriptor string
+# Uno PID:
+ARDUINO_MODEL_PID = 0x0001
+# Mega 2560 PID:
+#ARDUINO_MODEL_PID = 0x0010
+
+
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
+# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
+# "Board" inside the application directory.
+BOARD = USER
+
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_CLOCK below, as it is sourced by
+# F_CLOCK after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+# Input clock frequency.
+# This will define a symbol, F_CLOCK, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_CLOCK = $(F_CPU)
+
+
+# Output format. (can be srec, ihex, binary)
+FORMAT = ihex
+
+
+# Target file name (without extension).
+TARGET = Arduino-usbserial
+
+
+# Object files directory
+# To put object files in current directory, use a dot (.), do NOT make
+# this an empty or blank macro!
+OBJDIR = .
+
+
+# Path to the LUFA library
+LUFA_PATH = ../..
+
+
+# LUFA library compile-time options
+LUFA_OPTS = -D USB_DEVICE_ONLY
+LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
+LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
+LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
+LUFA_OPTS += -D INTERRUPT_CONTROL_ENDPOINT
+LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0
+LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+
+
+# Create the LUFA source path variables by including the LUFA root makefile
+include $(LUFA_PATH)/LUFA/makefile
+
+
+# List C source files here. (C dependencies are automatically generated.)
+SRC = $(TARGET).c \
+ Descriptors.c \
+ $(LUFA_SRC_USB) \
+ $(LUFA_SRC_USBCLASS) \
+ $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Device.c \
+ $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Endpoint.c \
+ $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/HostStandardReq.c \
+ $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Host.c \
+ $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Pipe.c \
+ $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/USBController.c \
+ $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/Events.c \
+ $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/USBInterrupt.c \
+ $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBTask.c \
+ $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/DeviceStandardReq.c \
+ $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/ConfigDescriptor.c \
+ $(LUFA_PATH)/LUFA/Drivers/USB/Class/Device/CDC.c \
+ $(LUFA_PATH)/LUFA/Drivers/USB/Class/Host/CDC.c
+
+
+# List C++ source files here. (C dependencies are automatically generated.)
+CPPSRC =
+
+
+# List Assembler source files here.
+# Make them always end in a capital .S. Files ending in a lowercase .s
+# will not be considered source files but generated files (assembler
+# output from the compiler), and will be deleted upon "make clean"!
+# Even though the DOS/Win* filesystem matches both .s and .S the same,
+# it will preserve the spelling of the filenames, and gcc itself does
+# care about how the name is spelled on its command-line.
+ASRC =
+
+
+# Optimization level, can be [0, 1, 2, 3, s].
+# 0 = turn off optimization. s = optimize for size.
+# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
+OPT = s
+
+
+# Debugging format.
+# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
+# AVR Studio 4.10 requires dwarf-2.
+# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
+DEBUG = dwarf-2
+
+
+# List any extra directories to look for include files here.
+# Each directory must be seperated by a space.
+# Use forward slashes for directory separators.
+# For a directory that has spaces, enclose it in quotes.
+EXTRAINCDIRS = $(LUFA_PATH)/
+
+
+# Compiler flag to set the C Standard level.
+# c89 = "ANSI" C
+# gnu89 = c89 plus GCC extensions
+# c99 = ISO C99 standard (not yet fully implemented)
+# gnu99 = c99 plus GCC extensions
+CSTANDARD = -std=gnu99
+
+
+# Place -D or -U options here for C sources
+CDEFS = -DF_CPU=$(F_CPU)UL
+CDEFS += -DF_CLOCK=$(F_CLOCK)UL
+CDEFS += -DARDUINO_MODEL_PID=$(ARDUINO_MODEL_PID)
+CDEFS += -DBOARD=BOARD_$(BOARD)
+CDEFS += $(LUFA_OPTS)
+CDEFS += -DAVR_RESET_LINE_PORT="PORTD"
+CDEFS += -DAVR_RESET_LINE_DDR="DDRD"
+CDEFS += -DAVR_RESET_LINE_MASK="(1 << 7)"
+CDEFS += -DTX_RX_LED_PULSE_MS=3
+CDEFS += -DPING_PONG_LED_PULSE_MS=100
+
+# Place -D or -U options here for ASM sources
+ADEFS = -DF_CPU=$(F_CPU)
+ADEFS += -DF_CLOCK=$(F_CLOCK)UL
+ADEFS += -DBOARD=BOARD_$(BOARD)
+ADEFS += $(LUFA_OPTS)
+
+# Place -D or -U options here for C++ sources
+CPPDEFS = -DF_CPU=$(F_CPU)UL
+CPPDEFS += -DF_CLOCK=$(F_CLOCK)UL
+CPPDEFS += -DBOARD=BOARD_$(BOARD)
+CPPDEFS += $(LUFA_OPTS)
+#CPPDEFS += -D__STDC_LIMIT_MACROS
+#CPPDEFS += -D__STDC_CONSTANT_MACROS
+
+
+
+#---------------- Compiler Options C ----------------
+# -g*: generate debugging information
+# -O*: optimization level
+# -f...: tuning, see GCC manual and avr-libc documentation
+# -Wall...: warning level
+# -Wa,...: tell GCC to pass this to the assembler.
+# -adhlns...: create assembler listing
+CFLAGS = -g$(DEBUG)
+CFLAGS += $(CDEFS)
+CFLAGS += -O$(OPT)
+CFLAGS += -funsigned-char
+CFLAGS += -funsigned-bitfields
+CFLAGS += -ffunction-sections
+CFLAGS += -fno-inline-small-functions
+CFLAGS += -fpack-struct
+CFLAGS += -fshort-enums
+CFLAGS += -fno-strict-aliasing
+CFLAGS += -Wall
+CFLAGS += -Wstrict-prototypes
+#CFLAGS += -mshort-calls
+#CFLAGS += -fno-unit-at-a-time
+#CFLAGS += -Wundef
+#CFLAGS += -Wunreachable-code
+#CFLAGS += -Wsign-compare
+CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
+CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
+CFLAGS += $(CSTANDARD)
+
+
+#---------------- Compiler Options C++ ----------------
+# -g*: generate debugging information
+# -O*: optimization level
+# -f...: tuning, see GCC manual and avr-libc documentation
+# -Wall...: warning level
+# -Wa,...: tell GCC to pass this to the assembler.
+# -adhlns...: create assembler listing
+CPPFLAGS = -g$(DEBUG)
+CPPFLAGS += $(CPPDEFS)
+CPPFLAGS += -O$(OPT)
+CPPFLAGS += -funsigned-char
+CPPFLAGS += -funsigned-bitfields
+CPPFLAGS += -fpack-struct
+CPPFLAGS += -fshort-enums
+CPPFLAGS += -fno-exceptions
+CPPFLAGS += -Wall
+CPPFLAGS += -Wundef
+CFLAGS += -Wundef
+#CPPFLAGS += -mshort-calls
+#CPPFLAGS += -fno-unit-at-a-time
+#CPPFLAGS += -Wstrict-prototypes
+#CPPFLAGS += -Wunreachable-code
+#CPPFLAGS += -Wsign-compare
+CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
+CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
+#CPPFLAGS += $(CSTANDARD)
+
+
+#---------------- Assembler Options ----------------
+# -Wa,...: tell GCC to pass this to the assembler.
+# -adhlns: create listing
+# -gstabs: have the assembler create line number information; note that
+# for use in COFF files, additional information about filenames
+# and function names needs to be present in the assembler source
+# files -- see avr-libc docs [FIXME: not yet described there]
+# -listing-cont-lines: Sets the maximum number of continuation lines of hex
+# dump that will be displayed for a given single line of source input.
+ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
+
+
+#---------------- Library Options ----------------
+# Minimalistic printf version
+PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
+
+# Floating point printf version (requires MATH_LIB = -lm below)
+PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
+
+# If this is left blank, then it will use the Standard printf version.
+PRINTF_LIB =
+#PRINTF_LIB = $(PRINTF_LIB_MIN)
+#PRINTF_LIB = $(PRINTF_LIB_FLOAT)
+
+
+# Minimalistic scanf version
+SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
+
+# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
+SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
+
+# If this is left blank, then it will use the Standard scanf version.
+SCANF_LIB =
+#SCANF_LIB = $(SCANF_LIB_MIN)
+#SCANF_LIB = $(SCANF_LIB_FLOAT)
+
+
+MATH_LIB = -lm
+
+
+# List any extra directories to look for libraries here.
+# Each directory must be seperated by a space.
+# Use forward slashes for directory separators.
+# For a directory that has spaces, enclose it in quotes.
+EXTRALIBDIRS =
+
+
+
+#---------------- External Memory Options ----------------
+
+# 64 KB of external RAM, starting after internal RAM (ATmega128!),
+# used for variables (.data/.bss) and heap (malloc()).
+#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
+
+# 64 KB of external RAM, starting after internal RAM (ATmega128!),
+# only used for heap (malloc()).
+#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
+
+EXTMEMOPTS =
+
+
+
+#---------------- Linker Options ----------------
+# -Wl,...: tell GCC to pass this to linker.
+# -Map: create map file
+# --cref: add cross reference to map file
+LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
+LDFLAGS += -Wl,--relax
+LDFLAGS += -Wl,--gc-sections
+LDFLAGS += $(EXTMEMOPTS)
+LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
+LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
+#LDFLAGS += -T linker_script.x
+
+
+
+#---------------- Programming Options (avrdude) ----------------
+
+# Programming hardware
+# Type: avrdude -c ?
+# to get a full listing.
+#
+AVRDUDE_PROGRAMMER = avrispmkii
+
+# com1 = serial port. Use lpt1 to connect to parallel port.
+AVRDUDE_PORT = usb
+
+AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
+#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
+
+
+# Uncomment the following if you want avrdude's erase cycle counter.
+# Note that this counter needs to be initialized first using -Yn,
+# see avrdude manual.
+#AVRDUDE_ERASE_COUNTER = -y
+
+# Uncomment the following if you do /not/ wish a verification to be
+# performed after programming the device.
+#AVRDUDE_NO_VERIFY = -V
+
+# Increase verbosity level. Please use this when submitting bug
+# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
+# to submit bug reports.
+#AVRDUDE_VERBOSE = -v -v
+
+AVRDUDE_FORCE = -F
+
+AVRDUDE_FLAGS = -p $(MCU_AVRDUDE) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
+AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
+AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
+AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
+AVRDUDE_FLAGS += $(AVRDUDE_FORCE)
+
+
+
+#---------------- Debugging Options ----------------
+
+# For simulavr only - target MCU frequency.
+DEBUG_MFREQ = $(F_CPU)
+
+# Set the DEBUG_UI to either gdb or insight.
+# DEBUG_UI = gdb
+DEBUG_UI = insight
+
+# Set the debugging back-end to either avarice, simulavr.
+DEBUG_BACKEND = avarice
+#DEBUG_BACKEND = simulavr
+
+# GDB Init Filename.
+GDBINIT_FILE = __avr_gdbinit
+
+# When using avarice settings for the JTAG
+JTAG_DEV = /dev/com1
+
+# Debugging port used to communicate between GDB / avarice / simulavr.
+DEBUG_PORT = 4242
+
+# Debugging host used to communicate between GDB / avarice / simulavr, normally
+# just set to localhost unless doing some sort of crazy debugging when
+# avarice is running on a different computer.
+DEBUG_HOST = localhost
+
+
+
+#============================================================================
+
+
+# Define programs and commands.
+SHELL = sh
+CC = avr-gcc
+OBJCOPY = avr-objcopy
+OBJDUMP = avr-objdump
+SIZE = avr-size
+AR = avr-ar rcs
+NM = avr-nm
+AVRDUDE = avrdude
+REMOVE = rm -f
+REMOVEDIR = rm -rf
+COPY = cp
+WINSHELL = cmd
+
+# Define Messages
+# English
+MSG_ERRORS_NONE = Errors: none
+MSG_BEGIN = -------- begin --------
+MSG_END = -------- end --------
+MSG_SIZE_BEFORE = Size before:
+MSG_SIZE_AFTER = Size after:
+MSG_COFF = Converting to AVR COFF:
+MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
+MSG_FLASH = Creating load file for Flash:
+MSG_EEPROM = Creating load file for EEPROM:
+MSG_EXTENDED_LISTING = Creating Extended Listing:
+MSG_SYMBOL_TABLE = Creating Symbol Table:
+MSG_LINKING = Linking:
+MSG_COMPILING = Compiling C:
+MSG_COMPILING_CPP = Compiling C++:
+MSG_ASSEMBLING = Assembling:
+MSG_CLEANING = Cleaning project:
+MSG_CREATING_LIBRARY = Creating library:
+
+
+
+
+# Define all object files.
+OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
+
+# Define all listing files.
+LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
+
+
+# Compiler flags to generate dependency files.
+GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
+
+
+# Combine all necessary flags and optional flags.
+# Add target processor to flags.
+ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
+ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)
+ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
+
+
+
+
+
+# Default target.
+#all: begin gccversion sizebefore build checkinvalidevents showliboptions showtarget sizeafter end
+all: begin gccversion sizebefore build showliboptions showtarget sizeafter end
+
+# Change the build target to build a HEX file or a library.
+build: elf hex eep lss sym asm
+#build: lib
+
+
+elf: $(TARGET).elf
+hex: $(TARGET).hex
+eep: $(TARGET).eep
+lss: $(TARGET).lss
+sym: $(TARGET).sym
+asm: $(TARGET).s
+LIBNAME=lib$(TARGET).a
+lib: $(LIBNAME)
+
+
+
+# Eye candy.
+# AVR Studio 3.x does not check make's exit code but relies on
+# the following magic strings to be generated by the compile job.
+begin:
+ @echo
+ @echo $(MSG_BEGIN)
+
+end:
+ @echo $(MSG_END)
+ @echo
+
+
+# Display size of file.
+HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
+ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf
+MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )
+FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr )
+
+sizebefore:
+ @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
+ 2>/dev/null; echo; fi
+
+sizeafter:
+ @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
+ 2>/dev/null; echo; fi
+
+#$(LUFA_PATH)/LUFA/LUFA_Events.lst:
+# @make -C $(LUFA_PATH)/LUFA/ LUFA_Events.lst
+
+#checkinvalidevents: $(LUFA_PATH)/LUFA/LUFA_Events.lst
+# @echo
+# @echo Checking for invalid events...
+# @$(shell) avr-nm $(OBJ) | sed -n -e 's/^.*EVENT_/EVENT_/p' | \
+# grep -F -v --file=$(LUFA_PATH)/LUFA/LUFA_Events.lst > InvalidEvents.tmp || true
+# @sed -n -e 's/^/ WARNING - INVALID EVENT NAME: /p' InvalidEvents.tmp
+# @if test -s InvalidEvents.tmp; then exit 1; fi
+
+showliboptions:
+ @echo
+ @echo ---- Compile Time Library Options ----
+ @for i in $(LUFA_OPTS:-D%=%); do \
+ echo $$i; \
+ done
+ @echo --------------------------------------
+
+showtarget:
+ @echo
+ @echo --------- Target Information ---------
+ @echo AVR Model: $(MCU)
+ @echo Board: $(BOARD)
+ @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master
+ @echo --------------------------------------
+
+
+# Display compiler version information.
+gccversion :
+ @$(CC) --version
+
+
+# Program the device.
+program: $(TARGET).hex $(TARGET).eep
+ $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
+
+flip: $(TARGET).hex
+ batchisp -hardware usb -device $(MCU_DFU) -operation erase f
+ batchisp -hardware usb -device $(MCU_DFU) -operation loadbuffer $(TARGET).hex program
+ batchisp -hardware usb -device $(MCU_DFU) -operation start reset 0
+
+dfu: $(TARGET).hex
+ dfu-programmer $(MCU_DFU) erase
+ dfu-programmer $(MCU_DFU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU_DFU) reset
+
+
+flip-ee: $(TARGET).hex $(TARGET).eep
+ $(COPY) $(TARGET).eep $(TARGET)eep.hex
+ batchisp -hardware usb -device $(MCU_DFU) -operation memory EEPROM erase
+ batchisp -hardware usb -device $(MCU_DFU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
+ batchisp -hardware usb -device $(MCU_DFU) -operation start reset 0
+ $(REMOVE) $(TARGET)eep.hex
+
+dfu-ee: $(TARGET).hex $(TARGET).eep
+ dfu-programmer $(MCU_DFU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU_DFU) reset
+
+
+# Generate avr-gdb config/init file which does the following:
+# define the reset signal, load the target file, connect to target, and set
+# a breakpoint at main().
+gdb-config:
+ @$(REMOVE) $(GDBINIT_FILE)
+ @echo define reset >> $(GDBINIT_FILE)
+ @echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
+ @echo end >> $(GDBINIT_FILE)
+ @echo file $(TARGET).elf >> $(GDBINIT_FILE)
+ @echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE)
+ifeq ($(DEBUG_BACKEND),simulavr)
+ @echo load >> $(GDBINIT_FILE)
+endif
+ @echo break main >> $(GDBINIT_FILE)
+
+debug: gdb-config $(TARGET).elf
+ifeq ($(DEBUG_BACKEND), avarice)
+ @echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
+ @$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
+ $(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
+ @$(WINSHELL) /c pause
+
+else
+ @$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
+ $(DEBUG_MFREQ) --port $(DEBUG_PORT)
+endif
+ @$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
+
+
+
+
+# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
+COFFCONVERT = $(OBJCOPY) --debugging
+COFFCONVERT += --change-section-address .data-0x800000
+COFFCONVERT += --change-section-address .bss-0x800000
+COFFCONVERT += --change-section-address .noinit-0x800000
+COFFCONVERT += --change-section-address .eeprom-0x810000
+
+
+
+coff: $(TARGET).elf
+ @echo
+ @echo $(MSG_COFF) $(TARGET).cof
+ $(COFFCONVERT) -O coff-avr $< $(TARGET).cof
+
+
+extcoff: $(TARGET).elf
+ @echo
+ @echo $(MSG_EXTENDED_COFF) $(TARGET).cof
+ $(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
+
+
+
+# Create final output files (.hex, .eep) from ELF output file.
+%.hex: %.elf
+ @echo
+ @echo $(MSG_FLASH) $@
+ $(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock $< $@
+
+%.eep: %.elf
+ @echo
+ @echo $(MSG_EEPROM) $@
+ -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
+ --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0
+
+# Create extended listing file from ELF output file.
+%.lss: %.elf
+ @echo
+ @echo $(MSG_EXTENDED_LISTING) $@
+ $(OBJDUMP) -h -S -z $< > $@
+
+# Create a symbol table from ELF output file.
+%.sym: %.elf
+ @echo
+ @echo $(MSG_SYMBOL_TABLE) $@
+ $(NM) -n $< > $@
+
+
+
+# Create library from object files.
+.SECONDARY : $(TARGET).a
+.PRECIOUS : $(OBJ)
+%.a: $(OBJ)
+ @echo
+ @echo $(MSG_CREATING_LIBRARY) $@
+ $(AR) $@ $(OBJ)
+
+
+# Link: create ELF output file from object files.
+.SECONDARY : $(TARGET).elf
+.PRECIOUS : $(OBJ)
+%.elf: $(OBJ)
+ @echo
+ @echo $(MSG_LINKING) $@
+ $(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
+
+
+# Compile: create object files from C source files.
+$(OBJDIR)/%.o : %.c
+ @echo
+ @echo $(MSG_COMPILING) $<
+ $(CC) -c $(ALL_CFLAGS) $< -o $@
+
+
+# Compile: create object files from C++ source files.
+$(OBJDIR)/%.o : %.cpp
+ @echo
+ @echo $(MSG_COMPILING_CPP) $<
+ $(CC) -c $(ALL_CPPFLAGS) $< -o $@
+
+
+# Compile: create assembler files from C source files.
+%.s : %.c
+ $(CC) -S $(ALL_CFLAGS) $< -o $@
+
+
+# Compile: create assembler files from C++ source files.
+%.s : %.cpp
+ $(CC) -S $(ALL_CPPFLAGS) $< -o $@
+
+
+# Assemble: create object files from assembler source files.
+$(OBJDIR)/%.o : %.S
+ @echo
+ @echo $(MSG_ASSEMBLING) $<
+ $(CC) -c $(ALL_ASFLAGS) $< -o $@
+
+
+# Create preprocessed source for use in sending a bug report.
+%.i : %.c
+ $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
+
+
+# Target: clean project.
+clean: begin clean_list clean_binary end
+
+clean_binary:
+ $(REMOVE) $(TARGET).hex
+
+clean_list:
+ @echo $(MSG_CLEANING)
+ $(REMOVE) $(TARGET).hex
+ $(REMOVE) $(TARGET).eep
+ $(REMOVE) $(TARGET).cof
+ $(REMOVE) $(TARGET).elf
+ $(REMOVE) $(TARGET).map
+ $(REMOVE) $(TARGET).sym
+ $(REMOVE) $(TARGET).lss
+ $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o)
+ $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst)
+ $(REMOVE) $(SRC:.c=.s)
+ $(REMOVE) $(SRC:.c=.d)
+ $(REMOVE) $(SRC:.c=.i)
+ $(REMOVEDIR) .dep
+
+doxygen:
+ @echo Generating Project Documentation...
+ @doxygen Doxygen.conf
+ @echo Documentation Generation Complete.
+
+clean_doxygen:
+ rm -rf Documentation
+
+# Create object files directory
+$(shell mkdir $(OBJDIR) 2>/dev/null)
+
+
+# Include the dependency files.
+-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
+
+
+# Listing of phony targets.
+.PHONY : all begin finish end sizebefore sizeafter gccversion \
+build elf hex eep lss sym coff extcoff doxygen clean \
+clean_list clean_doxygen program dfu flip flip-ee dfu-ee \
+debug gdb-config
diff --git a/test/ardmake/hardware/firmwares/arduino-usbserial/readme.txt b/test/ardmake/hardware/firmwares/arduino-usbserial/readme.txt new file mode 100644 index 0000000..289326b --- /dev/null +++ b/test/ardmake/hardware/firmwares/arduino-usbserial/readme.txt @@ -0,0 +1,13 @@ +To setup the project and upload the Arduino usbserial application firmware to an ATMEGA8U2 using the Arduino USB DFU bootloader: +1. unpack the source into LUFA's Projects directory +2. set ARDUINO_MODEL_PID in the makefile as appropriate +3. do "make clean; make" +4. put the 8U2 into USB DFU mode: +4.a. assert and hold the 8U2's RESET line +4.b. assert and hold the 8U2's HWB line +4.c. release the 8U2's RESET line +4.d. release the 8U2's HWB line +5. confirm that the board enumerates as either "Arduino Uno DFU" or "Arduino Mega 2560 DFU" +6. do "make dfu" (OS X or Linux - dfu-programmer must be installed first) or "make flip" (Windows - Flip must be installed first) + +Check that the board enumerates as either "Arduino Uno" or "Arduino Mega 2560". Test by uploading a new Arduino sketch from the Arduino IDE. |