PRG            = ledcube
OBJ            = launch_effect.o main.o draw.o effect.o font.o gameoflife.o
#MCU_TARGET     = at90s2313
#MCU_TARGET     = at90s2333
#MCU_TARGET     = at90s4414
#MCU_TARGET     = at90s4433
#MCU_TARGET     = at90s4434
#MCU_TARGET     = at90s8515
#MCU_TARGET     = at90s8535
#MCU_TARGET     = atmega128
#MCU_TARGET     = atmega1280
#MCU_TARGET     = atmega1281
#MCU_TARGET     = atmega1284p
#MCU_TARGET     = atmega16
#MCU_TARGET     = atmega163
#MCU_TARGET     = atmega164p
#MCU_TARGET     = atmega165
#MCU_TARGET     = atmega165p
#MCU_TARGET     = atmega168
#MCU_TARGET     = atmega169
#MCU_TARGET     = atmega169p
#MCU_TARGET     = atmega2560
#MCU_TARGET     = atmega2561
#MCU_TARGET     = atmega32
#MCU_TARGET     = atmega324p
#MCU_TARGET     = atmega325
#MCU_TARGET     = atmega3250
#MCU_TARGET     = atmega329
#MCU_TARGET     = atmega3290
#MCU_TARGET     = atmega48
#MCU_TARGET     = atmega64
#MCU_TARGET     = atmega640
#MCU_TARGET     = atmega644
#MCU_TARGET     = atmega644p
#MCU_TARGET     = atmega645
#MCU_TARGET     = atmega6450
#MCU_TARGET     = atmega649
#MCU_TARGET     = atmega6490
MCU_TARGET     = atmega8
#MCU_TARGET     = atmega8515
#MCU_TARGET     = atmega8535
#MCU_TARGET     = atmega88
#MCU_TARGET     = attiny2313
#MCU_TARGET     = attiny24
#MCU_TARGET     = attiny25
#MCU_TARGET     = attiny26
#MCU_TARGET     = attiny261
#MCU_TARGET     = attiny44
#MCU_TARGET     = attiny45
#MCU_TARGET     = attiny461
#MCU_TARGET     = attiny84
#MCU_TARGET     = attiny85
#MCU_TARGET     = attiny861

#OPTIMIZE       = -O2
OPTIMIZE       = -Os

# One must use -ffunction-sections (compiler switch) AND -Wl,-gc-sections
# (linker switch) to have the linker "garbage collect" (or remove) unused
# sections. The -ffunction-sections switch places all functions within their
# own section. You must use both together to make this work.
DEFS           = -ffunction-sections -DF_CPU=16000000UL
LIBS           = -Wl,-gc-sections
# You should not have to change anything below here.

CC             = avr-gcc
CXX            = avr-g++

# Override is only needed by avr-lib build system.

override CFLAGS        = -g -Wall $(OPTIMIZE) -mmcu=$(MCU_TARGET) $(DEFS) #-fno-exceptions -fno-rtti
override LDFLAGS       = -Wl,-Map,$(PRG).map --relax

OBJCOPY        = avr-objcopy
OBJDUMP        = avr-objdump

%.o: src/%.cpp
	$(CXX) $(CFLAGS) -c -o $@ $^

all: $(PRG).elf lst text eeprom
	avr-size --mcu=$(MCU_TARGET) -C $(PRG).elf

$(PRG).elf: $(OBJ)
	$(CXX) $(CFLAGS) $(LDFLAGS) -o $@ $^ $(LIBS)

# dependency:
#demo.o: demo.c iocompat.h
#%.o: %.c

clean:
	rm -rf *.o $(PRG).elf *.eps *.png *.pdf *.bak 
	rm -rf *.lst *.map $(EXTRA_CLEAN_FILES)

lst:  $(PRG).lst

%.lst: %.elf
	$(OBJDUMP) -h -S $< > $@

# Rules for building the .text rom images

text: hex bin srec

hex:  $(PRG).hex
bin:  $(PRG).bin
srec: $(PRG).srec

%.hex: %.elf
	$(OBJCOPY) -j .text -j .data -O ihex $< $@

%.srec: %.elf
	$(OBJCOPY) -j .text -j .data -O srec $< $@

%.bin: %.elf
	$(OBJCOPY) -j .text -j .data -O binary $< $@

# Rules for building the .eeprom rom images

eeprom: ehex ebin esrec

ehex:  $(PRG)_eeprom.hex
ebin:  $(PRG)_eeprom.bin
esrec: $(PRG)_eeprom.srec

%_eeprom.hex: %.elf
	$(OBJCOPY) -j .eeprom --change-section-lma .eeprom=0 -O ihex $< $@ \
	|| { echo empty $@ not generated; exit 0; }

%_eeprom.srec: %.elf
	$(OBJCOPY) -j .eeprom --change-section-lma .eeprom=0 -O srec $< $@ \
	|| { echo empty $@ not generated; exit 0; }

%_eeprom.bin: %.elf
	$(OBJCOPY) -j .eeprom --change-section-lma .eeprom=0 -O binary $< $@ \
	|| { echo empty $@ not generated; exit 0; }

# Every thing below here is used by avr-libc's build system and can be ignored
# by the casual user.

FIG2DEV                 = fig2dev
EXTRA_CLEAN_FILES       = *.hex *.bin *.srec

dox: eps png pdf

eps: $(PRG).eps
png: $(PRG).png
pdf: $(PRG).pdf

%.eps: %.fig
	$(FIG2DEV) -L eps $< $@

%.pdf: %.fig
	$(FIG2DEV) -L pdf $< $@

%.png: %.fig
	$(FIG2DEV) -L png $< $@

flash:
	# for atmega8 :
	avrdude -p m8 -c stk500v2 -P \
		/dev/serial/by-id/usb-FTDI_FT232R_USB_UART_A800dAli-if00-port0 \
		-e -U flash:w:$(PRG).hex
	# for attiny25
	#avrdude -p t25 -c stk500v2 -P /dev/ttyUSB0 -e -U flash:w:$(PRG).hex

a: all flash

size:
	avr-size --mcu=$(MCU_TARGET) -t -A $(PRG).elf
	avr-size --mcu=$(MCU_TARGET) -C $(PRG).elf
	avr-nm --size-sort $(PRG).elf