From 66dcf910bd4744d8ced56cb9586aa937a1a2d4c5 Mon Sep 17 00:00:00 2001 From: vg Date: Tue, 7 Jul 2020 16:24:01 +0200 Subject: first commit --- test/ardmake/hardware/boards.txt | 338 ++++ .../hardware/bootloaders/atmega/ATmegaBOOT_168.c | 1054 +++++++++++ .../atmega/ATmegaBOOT_168_atmega1280.hex | 245 +++ .../atmega/ATmegaBOOT_168_atmega328.hex | 125 ++ .../atmega/ATmegaBOOT_168_atmega328_pro_8MHz.hex | 124 ++ .../atmega/ATmegaBOOT_168_diecimila.hex | 126 ++ .../bootloaders/atmega/ATmegaBOOT_168_ng.hex | 110 ++ .../bootloaders/atmega/ATmegaBOOT_168_pro_8MHz.hex | 126 ++ test/ardmake/hardware/bootloaders/atmega/Makefile | 224 +++ .../hardware/bootloaders/atmega8/ATmegaBOOT.c | 507 +++++ .../hardware/bootloaders/atmega8/ATmegaBOOT.hex | 66 + test/ardmake/hardware/bootloaders/atmega8/Makefile | 88 + .../hardware/bootloaders/bt/ATmegaBOOT_168.c | 1038 ++++++++++ .../hardware/bootloaders/bt/ATmegaBOOT_168.hex | 121 ++ .../bootloaders/bt/ATmegaBOOT_168_atmega328_bt.hex | 162 ++ test/ardmake/hardware/bootloaders/bt/Makefile | 109 ++ .../bootloaders/lilypad/LilyPadBOOT_168.hex | 117 ++ .../hardware/bootloaders/lilypad/src/ATmegaBOOT.c | 979 ++++++++++ .../hardware/bootloaders/lilypad/src/Makefile | 84 + .../ardmake/hardware/bootloaders/optiboot/Makefile | 239 +++ test/ardmake/hardware/bootloaders/optiboot/makeall | 13 + .../hardware/bootloaders/optiboot/optiboot.c | 536 ++++++ .../bootloaders/optiboot/optiboot_atmega328.hex | 33 + .../bootloaders/optiboot/optiboot_atmega328.lst | 520 +++++ .../optiboot/optiboot_atmega328_pro_8MHz.hex | 33 + .../optiboot/optiboot_atmega328_pro_8MHz.lst | 520 +++++ .../bootloaders/optiboot/optiboot_diecimila.hex | 33 + .../bootloaders/optiboot/optiboot_diecimila.lst | 520 +++++ .../bootloaders/optiboot/optiboot_lilypad.hex | 34 + .../bootloaders/optiboot/optiboot_lilypad.lst | 533 ++++++ .../optiboot/optiboot_lilypad_resonator.hex | 34 + .../optiboot/optiboot_lilypad_resonator.lst | 533 ++++++ .../bootloaders/optiboot/optiboot_luminet.hex | 42 + .../bootloaders/optiboot/optiboot_luminet.lst | 604 ++++++ .../bootloaders/optiboot/optiboot_pro_16MHz.hex | 33 + .../bootloaders/optiboot/optiboot_pro_16MHz.lst | 520 +++++ .../bootloaders/optiboot/optiboot_pro_20mhz.hex | 33 + .../bootloaders/optiboot/optiboot_pro_20mhz.lst | 520 +++++ .../bootloaders/optiboot/optiboot_pro_8MHz.hex | 34 + .../bootloaders/optiboot/optiboot_pro_8MHz.lst | 533 ++++++ .../ardmake/hardware/bootloaders/stk500v2/Makefile | 588 ++++++ .../hardware/bootloaders/stk500v2/STK500V2.pnproj | 1 + .../hardware/bootloaders/stk500v2/STK500V2.pnps | 1 + .../bootloaders/stk500v2/avrinterruptnames.h | 742 ++++++++ .../hardware/bootloaders/stk500v2/command.h | 114 ++ .../hardware/bootloaders/stk500v2/stk500boot.c | 1996 ++++++++++++++++++++ .../hardware/bootloaders/stk500v2/stk500boot.ppg | 1 + .../stk500v2/stk500boot_v2_mega2560.hex | 513 +++++ .../hardware/cores/arduino/HardwareSerial.cpp | 303 +++ .../hardware/cores/arduino/HardwareSerial.d | 28 + .../hardware/cores/arduino/HardwareSerial.h | 76 + test/ardmake/hardware/cores/arduino/Makefile | 250 +++ test/ardmake/hardware/cores/arduino/Print.cpp | 220 +++ test/ardmake/hardware/cores/arduino/Print.d | 22 + test/ardmake/hardware/cores/arduino/Print.h | 66 + .../ardmake/hardware/cores/arduino/README.Makefile | 11 + test/ardmake/hardware/cores/arduino/Stream.h | 35 + test/ardmake/hardware/cores/arduino/Tone.cpp | 601 ++++++ test/ardmake/hardware/cores/arduino/WCharacter.h | 168 ++ test/ardmake/hardware/cores/arduino/WConstants.h | 1 + test/ardmake/hardware/cores/arduino/WInterrupts.c | 249 +++ test/ardmake/hardware/cores/arduino/WInterrupts.d | 24 + test/ardmake/hardware/cores/arduino/WMath.cpp | 60 + test/ardmake/hardware/cores/arduino/WMath.d | 3 + test/ardmake/hardware/cores/arduino/WProgram.h | 63 + test/ardmake/hardware/cores/arduino/WString.cpp | 443 +++++ test/ardmake/hardware/cores/arduino/WString.h | 112 ++ test/ardmake/hardware/cores/arduino/binary.h | 515 +++++ test/ardmake/hardware/cores/arduino/main.cpp | 14 + test/ardmake/hardware/cores/arduino/main.cxx | 12 + test/ardmake/hardware/cores/arduino/pins_arduino.c | 465 +++++ test/ardmake/hardware/cores/arduino/pins_arduino.d | 24 + test/ardmake/hardware/cores/arduino/pins_arduino.h | 88 + test/ardmake/hardware/cores/arduino/wiring.c | 289 +++ test/ardmake/hardware/cores/arduino/wiring.d | 22 + test/ardmake/hardware/cores/arduino/wiring.h | 135 ++ .../ardmake/hardware/cores/arduino/wiring_analog.c | 259 +++ .../ardmake/hardware/cores/arduino/wiring_analog.d | 24 + .../hardware/cores/arduino/wiring_digital.c | 166 ++ .../hardware/cores/arduino/wiring_digital.d | 24 + .../hardware/cores/arduino/wiring_private.h | 68 + test/ardmake/hardware/cores/arduino/wiring_pulse.c | 69 + test/ardmake/hardware/cores/arduino/wiring_pulse.d | 24 + test/ardmake/hardware/cores/arduino/wiring_shift.c | 55 + test/ardmake/hardware/cores/arduino/wiring_shift.d | 22 + .../firmwares/MEGA-dfu_and_usbserial_combined.hex | 234 +++ test/ardmake/hardware/firmwares/README.txt | 33 + .../firmwares/UNO-dfu_and_usbserial_combined.hex | 234 +++ .../firmwares/arduino-usbdfu/Arduino-usbdfu.c | 728 +++++++ .../firmwares/arduino-usbdfu/Arduino-usbdfu.h | 220 +++ .../hardware/firmwares/arduino-usbdfu/Board/LEDs.h | 110 ++ .../firmwares/arduino-usbdfu/Descriptors.c | 189 ++ .../firmwares/arduino-usbdfu/Descriptors.h | 177 ++ .../hardware/firmwares/arduino-usbdfu/makefile | 710 +++++++ .../hardware/firmwares/arduino-usbdfu/readme.txt | 7 + .../arduino-usbserial/Arduino-usbserial-mega.hex | 256 +++ .../arduino-usbserial/Arduino-usbserial-uno.hex | 256 +++ .../arduino-usbserial/Arduino-usbserial.c | 242 +++ .../arduino-usbserial/Arduino-usbserial.h | 79 + .../firmwares/arduino-usbserial/Board/LEDs.h | 110 ++ .../firmwares/arduino-usbserial/Descriptors.c | 277 +++ .../firmwares/arduino-usbserial/Descriptors.h | 88 + .../arduino-usbserial/Lib/LightweightRingBuff.h | 197 ++ .../hardware/firmwares/arduino-usbserial/makefile | 776 ++++++++ .../firmwares/arduino-usbserial/readme.txt | 13 + test/ardmake/hardware/programmers.txt | 20 + 106 files changed, 25565 insertions(+) create mode 100644 test/ardmake/hardware/boards.txt create mode 100644 test/ardmake/hardware/bootloaders/atmega/ATmegaBOOT_168.c create mode 100644 test/ardmake/hardware/bootloaders/atmega/ATmegaBOOT_168_atmega1280.hex create mode 100644 test/ardmake/hardware/bootloaders/atmega/ATmegaBOOT_168_atmega328.hex create mode 100644 test/ardmake/hardware/bootloaders/atmega/ATmegaBOOT_168_atmega328_pro_8MHz.hex create mode 100644 test/ardmake/hardware/bootloaders/atmega/ATmegaBOOT_168_diecimila.hex create mode 100644 test/ardmake/hardware/bootloaders/atmega/ATmegaBOOT_168_ng.hex create mode 100644 test/ardmake/hardware/bootloaders/atmega/ATmegaBOOT_168_pro_8MHz.hex create mode 100644 test/ardmake/hardware/bootloaders/atmega/Makefile create mode 100644 test/ardmake/hardware/bootloaders/atmega8/ATmegaBOOT.c create mode 100644 test/ardmake/hardware/bootloaders/atmega8/ATmegaBOOT.hex create mode 100644 test/ardmake/hardware/bootloaders/atmega8/Makefile create mode 100644 test/ardmake/hardware/bootloaders/bt/ATmegaBOOT_168.c create mode 100644 test/ardmake/hardware/bootloaders/bt/ATmegaBOOT_168.hex create mode 100644 test/ardmake/hardware/bootloaders/bt/ATmegaBOOT_168_atmega328_bt.hex create mode 100644 test/ardmake/hardware/bootloaders/bt/Makefile create mode 100644 test/ardmake/hardware/bootloaders/lilypad/LilyPadBOOT_168.hex create mode 100644 test/ardmake/hardware/bootloaders/lilypad/src/ATmegaBOOT.c create mode 100644 test/ardmake/hardware/bootloaders/lilypad/src/Makefile create mode 100644 test/ardmake/hardware/bootloaders/optiboot/Makefile create mode 100644 test/ardmake/hardware/bootloaders/optiboot/makeall create mode 100644 test/ardmake/hardware/bootloaders/optiboot/optiboot.c create mode 100644 test/ardmake/hardware/bootloaders/optiboot/optiboot_atmega328.hex create mode 100644 test/ardmake/hardware/bootloaders/optiboot/optiboot_atmega328.lst create mode 100644 test/ardmake/hardware/bootloaders/optiboot/optiboot_atmega328_pro_8MHz.hex create mode 100644 test/ardmake/hardware/bootloaders/optiboot/optiboot_atmega328_pro_8MHz.lst create mode 100644 test/ardmake/hardware/bootloaders/optiboot/optiboot_diecimila.hex create mode 100644 test/ardmake/hardware/bootloaders/optiboot/optiboot_diecimila.lst create mode 100644 test/ardmake/hardware/bootloaders/optiboot/optiboot_lilypad.hex create mode 100644 test/ardmake/hardware/bootloaders/optiboot/optiboot_lilypad.lst create mode 100644 test/ardmake/hardware/bootloaders/optiboot/optiboot_lilypad_resonator.hex create mode 100644 test/ardmake/hardware/bootloaders/optiboot/optiboot_lilypad_resonator.lst create mode 100644 test/ardmake/hardware/bootloaders/optiboot/optiboot_luminet.hex create mode 100644 test/ardmake/hardware/bootloaders/optiboot/optiboot_luminet.lst create mode 100644 test/ardmake/hardware/bootloaders/optiboot/optiboot_pro_16MHz.hex create mode 100644 test/ardmake/hardware/bootloaders/optiboot/optiboot_pro_16MHz.lst create mode 100644 test/ardmake/hardware/bootloaders/optiboot/optiboot_pro_20mhz.hex create mode 100644 test/ardmake/hardware/bootloaders/optiboot/optiboot_pro_20mhz.lst create mode 100644 test/ardmake/hardware/bootloaders/optiboot/optiboot_pro_8MHz.hex create mode 100644 test/ardmake/hardware/bootloaders/optiboot/optiboot_pro_8MHz.lst create mode 100644 test/ardmake/hardware/bootloaders/stk500v2/Makefile create mode 100644 test/ardmake/hardware/bootloaders/stk500v2/STK500V2.pnproj create mode 100644 test/ardmake/hardware/bootloaders/stk500v2/STK500V2.pnps create mode 100644 test/ardmake/hardware/bootloaders/stk500v2/avrinterruptnames.h create mode 100644 test/ardmake/hardware/bootloaders/stk500v2/command.h create mode 100644 test/ardmake/hardware/bootloaders/stk500v2/stk500boot.c create mode 100644 test/ardmake/hardware/bootloaders/stk500v2/stk500boot.ppg create mode 100644 test/ardmake/hardware/bootloaders/stk500v2/stk500boot_v2_mega2560.hex create mode 100644 test/ardmake/hardware/cores/arduino/HardwareSerial.cpp create mode 100644 test/ardmake/hardware/cores/arduino/HardwareSerial.d create mode 100644 test/ardmake/hardware/cores/arduino/HardwareSerial.h create mode 100644 test/ardmake/hardware/cores/arduino/Makefile create mode 100644 test/ardmake/hardware/cores/arduino/Print.cpp create mode 100644 test/ardmake/hardware/cores/arduino/Print.d create mode 100644 test/ardmake/hardware/cores/arduino/Print.h create mode 100644 test/ardmake/hardware/cores/arduino/README.Makefile create mode 100644 test/ardmake/hardware/cores/arduino/Stream.h create mode 100644 test/ardmake/hardware/cores/arduino/Tone.cpp create mode 100644 test/ardmake/hardware/cores/arduino/WCharacter.h create mode 100644 test/ardmake/hardware/cores/arduino/WConstants.h create mode 100644 test/ardmake/hardware/cores/arduino/WInterrupts.c create mode 100644 test/ardmake/hardware/cores/arduino/WInterrupts.d create mode 100644 test/ardmake/hardware/cores/arduino/WMath.cpp create mode 100644 test/ardmake/hardware/cores/arduino/WMath.d create mode 100644 test/ardmake/hardware/cores/arduino/WProgram.h create mode 100644 test/ardmake/hardware/cores/arduino/WString.cpp create mode 100644 test/ardmake/hardware/cores/arduino/WString.h create mode 100644 test/ardmake/hardware/cores/arduino/binary.h create mode 100644 test/ardmake/hardware/cores/arduino/main.cpp create mode 100644 test/ardmake/hardware/cores/arduino/main.cxx create mode 100644 test/ardmake/hardware/cores/arduino/pins_arduino.c create mode 100644 test/ardmake/hardware/cores/arduino/pins_arduino.d create mode 100644 test/ardmake/hardware/cores/arduino/pins_arduino.h create mode 100644 test/ardmake/hardware/cores/arduino/wiring.c create mode 100644 test/ardmake/hardware/cores/arduino/wiring.d create mode 100644 test/ardmake/hardware/cores/arduino/wiring.h create mode 100644 test/ardmake/hardware/cores/arduino/wiring_analog.c create mode 100644 test/ardmake/hardware/cores/arduino/wiring_analog.d create mode 100644 test/ardmake/hardware/cores/arduino/wiring_digital.c create mode 100644 test/ardmake/hardware/cores/arduino/wiring_digital.d create mode 100644 test/ardmake/hardware/cores/arduino/wiring_private.h create mode 100644 test/ardmake/hardware/cores/arduino/wiring_pulse.c create mode 100644 test/ardmake/hardware/cores/arduino/wiring_pulse.d create mode 100644 test/ardmake/hardware/cores/arduino/wiring_shift.c create mode 100644 test/ardmake/hardware/cores/arduino/wiring_shift.d create mode 100644 test/ardmake/hardware/firmwares/MEGA-dfu_and_usbserial_combined.hex create mode 100644 test/ardmake/hardware/firmwares/README.txt create mode 100644 test/ardmake/hardware/firmwares/UNO-dfu_and_usbserial_combined.hex create mode 100644 test/ardmake/hardware/firmwares/arduino-usbdfu/Arduino-usbdfu.c create mode 100644 test/ardmake/hardware/firmwares/arduino-usbdfu/Arduino-usbdfu.h create mode 100644 test/ardmake/hardware/firmwares/arduino-usbdfu/Board/LEDs.h create mode 100644 test/ardmake/hardware/firmwares/arduino-usbdfu/Descriptors.c create mode 100644 test/ardmake/hardware/firmwares/arduino-usbdfu/Descriptors.h create mode 100644 test/ardmake/hardware/firmwares/arduino-usbdfu/makefile create mode 100644 test/ardmake/hardware/firmwares/arduino-usbdfu/readme.txt create mode 100644 test/ardmake/hardware/firmwares/arduino-usbserial/Arduino-usbserial-mega.hex create mode 100644 test/ardmake/hardware/firmwares/arduino-usbserial/Arduino-usbserial-uno.hex create mode 100644 test/ardmake/hardware/firmwares/arduino-usbserial/Arduino-usbserial.c create mode 100644 test/ardmake/hardware/firmwares/arduino-usbserial/Arduino-usbserial.h create mode 100644 test/ardmake/hardware/firmwares/arduino-usbserial/Board/LEDs.h create mode 100644 test/ardmake/hardware/firmwares/arduino-usbserial/Descriptors.c create mode 100644 test/ardmake/hardware/firmwares/arduino-usbserial/Descriptors.h create mode 100644 test/ardmake/hardware/firmwares/arduino-usbserial/Lib/LightweightRingBuff.h create mode 100644 test/ardmake/hardware/firmwares/arduino-usbserial/makefile create mode 100644 test/ardmake/hardware/firmwares/arduino-usbserial/readme.txt create mode 100644 test/ardmake/hardware/programmers.txt (limited to 'test/ardmake') diff --git a/test/ardmake/hardware/boards.txt b/test/ardmake/hardware/boards.txt new file mode 100644 index 0000000..259c570 --- /dev/null +++ b/test/ardmake/hardware/boards.txt @@ -0,0 +1,338 @@ +############################################################## + +uno.name=Arduino Uno +uno.upload.protocol=arduino +uno.upload.maximum_size=32256 +uno.upload.speed=115200 +uno.bootloader.low_fuses=0xff +uno.bootloader.high_fuses=0xde +uno.bootloader.extended_fuses=0x05 +uno.bootloader.path=optiboot +uno.bootloader.file=optiboot_atmega328.hex +uno.bootloader.unlock_bits=0x3F +uno.bootloader.lock_bits=0x0F +uno.build.mcu=atmega328p +uno.build.f_cpu=16000000L +uno.build.core=arduino + +############################################################## + +atmega328.name=Arduino Duemilanove or Nano w/ ATmega328 + +atmega328.upload.protocol=arduino +atmega328.upload.maximum_size=30720 +atmega328.upload.speed=57600 + +atmega328.bootloader.low_fuses=0xFF +atmega328.bootloader.high_fuses=0xDA +atmega328.bootloader.extended_fuses=0x05 +atmega328.bootloader.path=atmega +atmega328.bootloader.file=ATmegaBOOT_168_atmega328.hex +atmega328.bootloader.unlock_bits=0x3F +atmega328.bootloader.lock_bits=0x0F + +atmega328.build.mcu=atmega328p +atmega328.build.f_cpu=16000000L +atmega328.build.core=arduino + +############################################################## + +diecimila.name=Arduino Diecimila, Duemilanove, or Nano w/ ATmega168 + +diecimila.upload.protocol=arduino +diecimila.upload.maximum_size=14336 +diecimila.upload.speed=19200 + +diecimila.bootloader.low_fuses=0xff +diecimila.bootloader.high_fuses=0xdd +diecimila.bootloader.extended_fuses=0x00 +diecimila.bootloader.path=atmega +diecimila.bootloader.file=ATmegaBOOT_168_diecimila.hex +diecimila.bootloader.unlock_bits=0x3F +diecimila.bootloader.lock_bits=0x0F + +diecimila.build.mcu=atmega168 +diecimila.build.f_cpu=16000000L +diecimila.build.core=arduino + +############################################################## + +mega2560.name=Arduino Mega 2560 + +mega2560.upload.protocol=stk500v2 +mega2560.upload.maximum_size=258048 +mega2560.upload.speed=115200 + +mega2560.bootloader.low_fuses=0xFF +mega2560.bootloader.high_fuses=0xD8 +mega2560.bootloader.extended_fuses=0xFD +mega2560.bootloader.path=stk500v2 +mega2560.bootloader.file=stk500boot_v2_mega2560.hex +mega2560.bootloader.unlock_bits=0x3F +mega2560.bootloader.lock_bits=0x0F + +mega2560.build.mcu=atmega2560 +mega2560.build.f_cpu=16000000L +mega2560.build.core=arduino + +############################################################## + +mega.name=Arduino Mega (ATmega1280) + +mega.upload.protocol=arduino +mega.upload.maximum_size=126976 +mega.upload.speed=57600 + +mega.bootloader.low_fuses=0xFF +mega.bootloader.high_fuses=0xDA +mega.bootloader.extended_fuses=0xF5 +mega.bootloader.path=atmega +mega.bootloader.file=ATmegaBOOT_168_atmega1280.hex +mega.bootloader.unlock_bits=0x3F +mega.bootloader.lock_bits=0x0F + +mega.build.mcu=atmega1280 +mega.build.f_cpu=16000000L +mega.build.core=arduino + +############################################################## + +mini.name=Arduino Mini + +mini.upload.protocol=arduino +mini.upload.maximum_size=14336 +mini.upload.speed=19200 + +mini.bootloader.low_fuses=0xff +mini.bootloader.high_fuses=0xdd +mini.bootloader.extended_fuses=0x00 +mini.bootloader.path=atmega +mini.bootloader.file=ATmegaBOOT_168_ng.hex +mini.bootloader.unlock_bits=0x3F +mini.bootloader.lock_bits=0x0F + +mini.build.mcu=atmega168 +mini.build.f_cpu=16000000L +mini.build.core=arduino + +############################################################## + +fio.name=Arduino Fio + +fio.upload.protocol=arduino +fio.upload.maximum_size=30720 +fio.upload.speed=57600 + +fio.bootloader.low_fuses=0xFF +fio.bootloader.high_fuses=0xDA +fio.bootloader.extended_fuses=0x05 +fio.bootloader.path=arduino:atmega +fio.bootloader.file=ATmegaBOOT_168_atmega328_pro_8MHz.hex +fio.bootloader.unlock_bits=0x3F +fio.bootloader.lock_bits=0x0F + +fio.build.mcu=atmega328p +fio.build.f_cpu=8000000L +fio.build.core=arduino:arduino + +############################################################## + +bt328.name=Arduino BT w/ ATmega328 + +bt328.upload.protocol=arduino +bt328.upload.maximum_size=28672 +bt328.upload.speed=19200 +bt328.upload.disable_flushing=true + +bt328.bootloader.low_fuses=0xff +bt328.bootloader.high_fuses=0xd8 +bt328.bootloader.extended_fuses=0x05 +bt328.bootloader.path=bt +bt328.bootloader.file=ATmegaBOOT_168_atmega328_bt.hex +bt328.bootloader.unlock_bits=0x3F +bt328.bootloader.lock_bits=0x0F + +bt328.build.mcu=atmega328p +bt328.build.f_cpu=16000000L +bt328.build.core=arduino + +############################################################## + +bt.name=Arduino BT w/ ATmega168 + +bt.upload.protocol=arduino +bt.upload.maximum_size=14336 +bt.upload.speed=19200 +bt.upload.disable_flushing=true + +bt.bootloader.low_fuses=0xff +bt.bootloader.high_fuses=0xdd +bt.bootloader.extended_fuses=0x00 +bt.bootloader.path=bt +bt.bootloader.file=ATmegaBOOT_168.hex +bt.bootloader.unlock_bits=0x3F +bt.bootloader.lock_bits=0x0F + +bt.build.mcu=atmega168 +bt.build.f_cpu=16000000L +bt.build.core=arduino + +############################################################## + +lilypad328.name=LilyPad Arduino w/ ATmega328 + +lilypad328.upload.protocol=arduino +lilypad328.upload.maximum_size=30720 +lilypad328.upload.speed=57600 + +lilypad328.bootloader.low_fuses=0xFF +lilypad328.bootloader.high_fuses=0xDA +lilypad328.bootloader.extended_fuses=0x05 +lilypad328.bootloader.path=atmega +lilypad328.bootloader.file=ATmegaBOOT_168_atmega328_pro_8MHz.hex +lilypad328.bootloader.unlock_bits=0x3F +lilypad328.bootloader.lock_bits=0x0F + +lilypad328.build.mcu=atmega328p +lilypad328.build.f_cpu=8000000L +lilypad328.build.core=arduino + +############################################################## + +lilypad.name=LilyPad Arduino w/ ATmega168 + +lilypad.upload.protocol=arduino +lilypad.upload.maximum_size=14336 +lilypad.upload.speed=19200 + +lilypad.bootloader.low_fuses=0xe2 +lilypad.bootloader.high_fuses=0xdd +lilypad.bootloader.extended_fuses=0x00 +lilypad.bootloader.path=lilypad +lilypad.bootloader.file=LilyPadBOOT_168.hex +lilypad.bootloader.unlock_bits=0x3F +lilypad.bootloader.lock_bits=0x0F + +lilypad.build.mcu=atmega168 +lilypad.build.f_cpu=8000000L +lilypad.build.core=arduino + +############################################################## + +pro5v328.name=Arduino Pro or Pro Mini (5V, 16 MHz) w/ ATmega328 + +pro5v328.upload.protocol=arduino +pro5v328.upload.maximum_size=30720 +pro5v328.upload.speed=57600 + +pro5v328.bootloader.low_fuses=0xFF +pro5v328.bootloader.high_fuses=0xDA +pro5v328.bootloader.extended_fuses=0x05 +pro5v328.bootloader.path=atmega +pro5v328.bootloader.file=ATmegaBOOT_168_atmega328.hex +pro5v328.bootloader.unlock_bits=0x3F +pro5v328.bootloader.lock_bits=0x0F + +pro5v328.build.mcu=atmega328p +pro5v328.build.f_cpu=16000000L +pro5v328.build.core=arduino + +############################################################## + +pro5v.name=Arduino Pro or Pro Mini (5V, 16 MHz) w/ ATmega168 + +pro5v.upload.protocol=arduino +pro5v.upload.maximum_size=14336 +pro5v.upload.speed=19200 + +pro5v.bootloader.low_fuses=0xff +pro5v.bootloader.high_fuses=0xdd +pro5v.bootloader.extended_fuses=0x00 +pro5v.bootloader.path=atmega +pro5v.bootloader.file=ATmegaBOOT_168_diecimila.hex +pro5v.bootloader.unlock_bits=0x3F +pro5v.bootloader.lock_bits=0x0F + +pro5v.build.mcu=atmega168 +pro5v.build.f_cpu=16000000L +pro5v.build.core=arduino + +############################################################## + +pro328.name=Arduino Pro or Pro Mini (3.3V, 8 MHz) w/ ATmega328 + +pro328.upload.protocol=arduino +pro328.upload.maximum_size=30720 +pro328.upload.speed=57600 + +pro328.bootloader.low_fuses=0xFF +pro328.bootloader.high_fuses=0xDA +pro328.bootloader.extended_fuses=0x05 +pro328.bootloader.path=atmega +pro328.bootloader.file=ATmegaBOOT_168_atmega328_pro_8MHz.hex +pro328.bootloader.unlock_bits=0x3F +pro328.bootloader.lock_bits=0x0F + +pro328.build.mcu=atmega328p +pro328.build.f_cpu=8000000L +pro328.build.core=arduino + +############################################################## + +pro.name=Arduino Pro or Pro Mini (3.3V, 8 MHz) w/ ATmega168 + +pro.upload.protocol=arduino +pro.upload.maximum_size=14336 +pro.upload.speed=19200 + +pro.bootloader.low_fuses=0xc6 +pro.bootloader.high_fuses=0xdd +pro.bootloader.extended_fuses=0x00 +pro.bootloader.path=atmega +pro.bootloader.file=ATmegaBOOT_168_pro_8MHz.hex +pro.bootloader.unlock_bits=0x3F +pro.bootloader.lock_bits=0x0F + +pro.build.mcu=atmega168 +pro.build.f_cpu=8000000L +pro.build.core=arduino + +############################################################## + +atmega168.name=Arduino NG or older w/ ATmega168 + +atmega168.upload.protocol=arduino +atmega168.upload.maximum_size=14336 +atmega168.upload.speed=19200 + +atmega168.bootloader.low_fuses=0xff +atmega168.bootloader.high_fuses=0xdd +atmega168.bootloader.extended_fuses=0x00 +atmega168.bootloader.path=atmega +atmega168.bootloader.file=ATmegaBOOT_168_ng.hex +atmega168.bootloader.unlock_bits=0x3F +atmega168.bootloader.lock_bits=0x0F + +atmega168.build.mcu=atmega168 +atmega168.build.f_cpu=16000000L +atmega168.build.core=arduino + +############################################################## + +atmega8.name=Arduino NG or older w/ ATmega8 + +atmega8.upload.protocol=arduino +atmega8.upload.maximum_size=7168 +atmega8.upload.speed=19200 + +atmega8.bootloader.low_fuses=0xdf +atmega8.bootloader.high_fuses=0xca +atmega8.bootloader.path=atmega8 +atmega8.bootloader.file=ATmegaBOOT.hex +atmega8.bootloader.unlock_bits=0x3F +atmega8.bootloader.lock_bits=0x0F + +atmega8.build.mcu=atmega8 +atmega8.build.f_cpu=16000000L +atmega8.build.core=arduino + diff --git a/test/ardmake/hardware/bootloaders/atmega/ATmegaBOOT_168.c b/test/ardmake/hardware/bootloaders/atmega/ATmegaBOOT_168.c new file mode 100644 index 0000000..2b9fefa --- /dev/null +++ b/test/ardmake/hardware/bootloaders/atmega/ATmegaBOOT_168.c @@ -0,0 +1,1054 @@ +/**********************************************************/ +/* Serial Bootloader for Atmel megaAVR Controllers */ +/* */ +/* tested with ATmega8, ATmega128 and ATmega168 */ +/* should work with other mega's, see code for details */ +/* */ +/* ATmegaBOOT.c */ +/* */ +/* */ +/* 20090308: integrated Mega changes into main bootloader */ +/* source by D. Mellis */ +/* 20080930: hacked for Arduino Mega (with the 1280 */ +/* processor, backwards compatible) */ +/* by D. Cuartielles */ +/* 20070626: hacked for Arduino Diecimila (which auto- */ +/* resets when a USB connection is made to it) */ +/* by D. Mellis */ +/* 20060802: hacked for Arduino by D. Cuartielles */ +/* based on a previous hack by D. Mellis */ +/* and D. Cuartielles */ +/* */ +/* Monitor and debug functions were added to the original */ +/* code by Dr. Erik Lins, chip45.com. (See below) */ +/* */ +/* Thanks to Karl Pitrich for fixing a bootloader pin */ +/* problem and more informative LED blinking! */ +/* */ +/* For the latest version see: */ +/* http://www.chip45.com/ */ +/* */ +/* ------------------------------------------------------ */ +/* */ +/* based on stk500boot.c */ +/* Copyright (c) 2003, Jason P. Kyle */ +/* All rights reserved. */ +/* see avr1.org for original file and information */ +/* */ +/* This program is free software; you can redistribute it */ +/* and/or modify it under the terms of the GNU General */ +/* Public License as published by the Free Software */ +/* Foundation; either version 2 of the License, or */ +/* (at your option) any later version. */ +/* */ +/* This program is distributed in the hope that it will */ +/* be useful, but WITHOUT ANY WARRANTY; without even the */ +/* implied warranty of MERCHANTABILITY or FITNESS FOR A */ +/* PARTICULAR PURPOSE. See the GNU General Public */ +/* License for more details. */ +/* */ +/* You should have received a copy of the GNU General */ +/* Public License along with this program; if not, write */ +/* to the Free Software Foundation, Inc., */ +/* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +/* */ +/* Licence can be viewed at */ +/* http://www.fsf.org/licenses/gpl.txt */ +/* */ +/* Target = Atmel AVR m128,m64,m32,m16,m8,m162,m163,m169, */ +/* m8515,m8535. ATmega161 has a very small boot block so */ +/* isn't supported. */ +/* */ +/* Tested with m168 */ +/**********************************************************/ + +/* $Id$ */ + + +/* some includes */ +#include +#include +#include +#include +#include +#include + +/* the current avr-libc eeprom functions do not support the ATmega168 */ +/* own eeprom write/read functions are used instead */ +#if !defined(__AVR_ATmega168__) || !defined(__AVR_ATmega328P__) +#include +#endif + +/* Use the F_CPU defined in Makefile */ + +/* 20060803: hacked by DojoCorp */ +/* 20070626: hacked by David A. Mellis to decrease waiting time for auto-reset */ +/* set the waiting time for the bootloader */ +/* get this from the Makefile instead */ +/* #define MAX_TIME_COUNT (F_CPU>>4) */ + +/* 20070707: hacked by David A. Mellis - after this many errors give up and launch application */ +#define MAX_ERROR_COUNT 5 + +/* set the UART baud rate */ +/* 20060803: hacked by DojoCorp */ +//#define BAUD_RATE 115200 +#ifndef BAUD_RATE +#define BAUD_RATE 19200 +#endif + + +/* SW_MAJOR and MINOR needs to be updated from time to time to avoid warning message from AVR Studio */ +/* never allow AVR Studio to do an update !!!! */ +#define HW_VER 0x02 +#define SW_MAJOR 0x01 +#define SW_MINOR 0x10 + + +/* Adjust to suit whatever pin your hardware uses to enter the bootloader */ +/* ATmega128 has two UARTS so two pins are used to enter bootloader and select UART */ +/* ATmega1280 has four UARTS, but for Arduino Mega, we will only use RXD0 to get code */ +/* BL0... means UART0, BL1... means UART1 */ +#ifdef __AVR_ATmega128__ +#define BL_DDR DDRF +#define BL_PORT PORTF +#define BL_PIN PINF +#define BL0 PINF7 +#define BL1 PINF6 +#elif defined __AVR_ATmega1280__ +/* we just don't do anything for the MEGA and enter bootloader on reset anyway*/ +#else +/* other ATmegas have only one UART, so only one pin is defined to enter bootloader */ +#define BL_DDR DDRD +#define BL_PORT PORTD +#define BL_PIN PIND +#define BL PIND6 +#endif + + +/* onboard LED is used to indicate, that the bootloader was entered (3x flashing) */ +/* if monitor functions are included, LED goes on after monitor was entered */ +#if defined __AVR_ATmega128__ || defined __AVR_ATmega1280__ +/* Onboard LED is connected to pin PB7 (e.g. Crumb128, PROBOmega128, Savvy128, Arduino Mega) */ +#define LED_DDR DDRB +#define LED_PORT PORTB +#define LED_PIN PINB +#define LED PINB7 +#else +/* Onboard LED is connected to pin PB5 in Arduino NG, Diecimila, and Duomilanuove */ +/* other boards like e.g. Crumb8, Crumb168 are using PB2 */ +#define LED_DDR DDRB +#define LED_PORT PORTB +#define LED_PIN PINB +#define LED PINB5 +#endif + + +/* monitor functions will only be compiled when using ATmega128, due to bootblock size constraints */ +#if defined(__AVR_ATmega128__) || defined(__AVR_ATmega1280__) +#define MONITOR 1 +#endif + + +/* define various device id's */ +/* manufacturer byte is always the same */ +#define SIG1 0x1E // Yep, Atmel is the only manufacturer of AVR micros. Single source :( + +#if defined __AVR_ATmega1280__ +#define SIG2 0x97 +#define SIG3 0x03 +#define PAGE_SIZE 0x80U //128 words + +#elif defined __AVR_ATmega1281__ +#define SIG2 0x97 +#define SIG3 0x04 +#define PAGE_SIZE 0x80U //128 words + +#elif defined __AVR_ATmega128__ +#define SIG2 0x97 +#define SIG3 0x02 +#define PAGE_SIZE 0x80U //128 words + +#elif defined __AVR_ATmega64__ +#define SIG2 0x96 +#define SIG3 0x02 +#define PAGE_SIZE 0x80U //128 words + +#elif defined __AVR_ATmega32__ +#define SIG2 0x95 +#define SIG3 0x02 +#define PAGE_SIZE 0x40U //64 words + +#elif defined __AVR_ATmega16__ +#define SIG2 0x94 +#define SIG3 0x03 +#define PAGE_SIZE 0x40U //64 words + +#elif defined __AVR_ATmega8__ +#define SIG2 0x93 +#define SIG3 0x07 +#define PAGE_SIZE 0x20U //32 words + +#elif defined __AVR_ATmega88__ +#define SIG2 0x93 +#define SIG3 0x0a +#define PAGE_SIZE 0x20U //32 words + +#elif defined __AVR_ATmega168__ +#define SIG2 0x94 +#define SIG3 0x06 +#define PAGE_SIZE 0x40U //64 words + +#elif defined __AVR_ATmega328P__ +#define SIG2 0x95 +#define SIG3 0x0F +#define PAGE_SIZE 0x40U //64 words + +#elif defined __AVR_ATmega162__ +#define SIG2 0x94 +#define SIG3 0x04 +#define PAGE_SIZE 0x40U //64 words + +#elif defined __AVR_ATmega163__ +#define SIG2 0x94 +#define SIG3 0x02 +#define PAGE_SIZE 0x40U //64 words + +#elif defined __AVR_ATmega169__ +#define SIG2 0x94 +#define SIG3 0x05 +#define PAGE_SIZE 0x40U //64 words + +#elif defined __AVR_ATmega8515__ +#define SIG2 0x93 +#define SIG3 0x06 +#define PAGE_SIZE 0x20U //32 words + +#elif defined __AVR_ATmega8535__ +#define SIG2 0x93 +#define SIG3 0x08 +#define PAGE_SIZE 0x20U //32 words +#endif + + +/* function prototypes */ +void putch(char); +char getch(void); +void getNch(uint8_t); +void byte_response(uint8_t); +void nothing_response(void); +char gethex(void); +void puthex(char); +void flash_led(uint8_t); + +/* some variables */ +union address_union { + uint16_t word; + uint8_t byte[2]; +} address; + +union length_union { + uint16_t word; + uint8_t byte[2]; +} length; + +struct flags_struct { + unsigned eeprom : 1; + unsigned rampz : 1; +} flags; + +uint8_t buff[256]; +uint8_t address_high; + +uint8_t pagesz=0x80; + +uint8_t i; +uint8_t bootuart = 0; + +uint8_t error_count = 0; + +void (*app_start)(void) = 0x0000; + + +/* main program starts here */ +int main(void) +{ + uint8_t ch,ch2; + uint16_t w; + +#ifdef WATCHDOG_MODS + ch = MCUSR; + MCUSR = 0; + + WDTCSR |= _BV(WDCE) | _BV(WDE); + WDTCSR = 0; + + // Check if the WDT was used to reset, in which case we dont bootload and skip straight to the code. woot. + if (! (ch & _BV(EXTRF))) // if its a not an external reset... + app_start(); // skip bootloader +#else + asm volatile("nop\n\t"); +#endif + + /* set pin direction for bootloader pin and enable pullup */ + /* for ATmega128, two pins need to be initialized */ +#ifdef __AVR_ATmega128__ + BL_DDR &= ~_BV(BL0); + BL_DDR &= ~_BV(BL1); + BL_PORT |= _BV(BL0); + BL_PORT |= _BV(BL1); +#else + /* We run the bootloader regardless of the state of this pin. Thus, don't + put it in a different state than the other pins. --DAM, 070709 + This also applies to Arduino Mega -- DC, 080930 + BL_DDR &= ~_BV(BL); + BL_PORT |= _BV(BL); + */ +#endif + + +#ifdef __AVR_ATmega128__ + /* check which UART should be used for booting */ + if(bit_is_clear(BL_PIN, BL0)) { + bootuart = 1; + } + else if(bit_is_clear(BL_PIN, BL1)) { + bootuart = 2; + } +#endif + +#if defined __AVR_ATmega1280__ + /* the mega1280 chip has four serial ports ... we could eventually use any of them, or not? */ + /* however, we don't wanna confuse people, to avoid making a mess, we will stick to RXD0, TXD0 */ + bootuart = 1; +#endif + + /* check if flash is programmed already, if not start bootloader anyway */ + if(pgm_read_byte_near(0x0000) != 0xFF) { + +#ifdef __AVR_ATmega128__ + /* no UART was selected, start application */ + if(!bootuart) { + app_start(); + } +#else + /* check if bootloader pin is set low */ + /* we don't start this part neither for the m8, nor m168 */ + //if(bit_is_set(BL_PIN, BL)) { + // app_start(); + // } +#endif + } + +#ifdef __AVR_ATmega128__ + /* no bootuart was selected, default to uart 0 */ + if(!bootuart) { + bootuart = 1; + } +#endif + + + /* initialize UART(s) depending on CPU defined */ +#if defined(__AVR_ATmega128__) || defined(__AVR_ATmega1280__) + if(bootuart == 1) { + UBRR0L = (uint8_t)(F_CPU/(BAUD_RATE*16L)-1); + UBRR0H = (F_CPU/(BAUD_RATE*16L)-1) >> 8; + UCSR0A = 0x00; + UCSR0C = 0x06; + UCSR0B = _BV(TXEN0)|_BV(RXEN0); + } + if(bootuart == 2) { + UBRR1L = (uint8_t)(F_CPU/(BAUD_RATE*16L)-1); + UBRR1H = (F_CPU/(BAUD_RATE*16L)-1) >> 8; + UCSR1A = 0x00; + UCSR1C = 0x06; + UCSR1B = _BV(TXEN1)|_BV(RXEN1); + } +#elif defined __AVR_ATmega163__ + UBRR = (uint8_t)(F_CPU/(BAUD_RATE*16L)-1); + UBRRHI = (F_CPU/(BAUD_RATE*16L)-1) >> 8; + UCSRA = 0x00; + UCSRB = _BV(TXEN)|_BV(RXEN); +#elif defined(__AVR_ATmega168__) || defined(__AVR_ATmega328P__) + +#ifdef DOUBLE_SPEED + UCSR0A = (1<> 8; +#else + UBRR0L = (uint8_t)(F_CPU/(BAUD_RATE*16L)-1); + UBRR0H = (F_CPU/(BAUD_RATE*16L)-1) >> 8; +#endif + + UCSR0B = (1<>8; // set baud rate + UBRRL = (((F_CPU/BAUD_RATE)/16)-1); + UCSRB = (1<> 8; + UCSRA = 0x00; + UCSRC = 0x06; + UCSRB = _BV(TXEN)|_BV(RXEN); +#endif + +#if defined __AVR_ATmega1280__ + /* Enable internal pull-up resistor on pin D0 (RX), in order + to supress line noise that prevents the bootloader from + timing out (DAM: 20070509) */ + /* feature added to the Arduino Mega --DC: 080930 */ + DDRE &= ~_BV(PINE0); + PORTE |= _BV(PINE0); +#endif + + + /* set LED pin as output */ + LED_DDR |= _BV(LED); + + + /* flash onboard LED to signal entering of bootloader */ +#if defined(__AVR_ATmega128__) || defined(__AVR_ATmega1280__) + // 4x for UART0, 5x for UART1 + flash_led(NUM_LED_FLASHES + bootuart); +#else + flash_led(NUM_LED_FLASHES); +#endif + + /* 20050803: by DojoCorp, this is one of the parts provoking the + system to stop listening, cancelled from the original */ + //putch('\0'); + + /* forever loop */ + for (;;) { + + /* get character from UART */ + ch = getch(); + + /* A bunch of if...else if... gives smaller code than switch...case ! */ + + /* Hello is anyone home ? */ + if(ch=='0') { + nothing_response(); + } + + + /* Request programmer ID */ + /* Not using PROGMEM string due to boot block in m128 being beyond 64kB boundry */ + /* Would need to selectively manipulate RAMPZ, and it's only 9 characters anyway so who cares. */ + else if(ch=='1') { + if (getch() == ' ') { + putch(0x14); + putch('A'); + putch('V'); + putch('R'); + putch(' '); + putch('I'); + putch('S'); + putch('P'); + putch(0x10); + } else { + if (++error_count == MAX_ERROR_COUNT) + app_start(); + } + } + + + /* AVR ISP/STK500 board commands DON'T CARE so default nothing_response */ + else if(ch=='@') { + ch2 = getch(); + if (ch2>0x85) getch(); + nothing_response(); + } + + + /* AVR ISP/STK500 board requests */ + else if(ch=='A') { + ch2 = getch(); + if(ch2==0x80) byte_response(HW_VER); // Hardware version + else if(ch2==0x81) byte_response(SW_MAJOR); // Software major version + else if(ch2==0x82) byte_response(SW_MINOR); // Software minor version + else if(ch2==0x98) byte_response(0x03); // Unknown but seems to be required by avr studio 3.56 + else byte_response(0x00); // Covers various unnecessary responses we don't care about + } + + + /* Device Parameters DON'T CARE, DEVICE IS FIXED */ + else if(ch=='B') { + getNch(20); + nothing_response(); + } + + + /* Parallel programming stuff DON'T CARE */ + else if(ch=='E') { + getNch(5); + nothing_response(); + } + + + /* P: Enter programming mode */ + /* R: Erase device, don't care as we will erase one page at a time anyway. */ + else if(ch=='P' || ch=='R') { + nothing_response(); + } + + + /* Leave programming mode */ + else if(ch=='Q') { + nothing_response(); +#ifdef WATCHDOG_MODS + // autoreset via watchdog (sneaky!) + WDTCSR = _BV(WDE); + while (1); // 16 ms +#endif + } + + + /* Set address, little endian. EEPROM in bytes, FLASH in words */ + /* Perhaps extra address bytes may be added in future to support > 128kB FLASH. */ + /* This might explain why little endian was used here, big endian used everywhere else. */ + else if(ch=='U') { + address.byte[0] = getch(); + address.byte[1] = getch(); + nothing_response(); + } + + + /* Universal SPI programming command, disabled. Would be used for fuses and lock bits. */ + else if(ch=='V') { + if (getch() == 0x30) { + getch(); + ch = getch(); + getch(); + if (ch == 0) { + byte_response(SIG1); + } else if (ch == 1) { + byte_response(SIG2); + } else { + byte_response(SIG3); + } + } else { + getNch(3); + byte_response(0x00); + } + } + + + /* Write memory, length is big endian and is in bytes */ + else if(ch=='d') { + length.byte[1] = getch(); + length.byte[0] = getch(); + flags.eeprom = 0; + if (getch() == 'E') flags.eeprom = 1; + for (w=0;w127) address_high = 0x01; //Only possible with m128, m256 will need 3rd address byte. FIXME + else address_high = 0x00; +#if defined(__AVR_ATmega128__) || defined(__AVR_ATmega1280__) || defined(__AVR_ATmega1281__) + RAMPZ = address_high; +#endif + address.word = address.word << 1; //address * 2 -> byte location + /* if ((length.byte[0] & 0x01) == 0x01) length.word++; //Even up an odd number of bytes */ + if ((length.byte[0] & 0x01)) length.word++; //Even up an odd number of bytes + cli(); //Disable interrupts, just to be sure +#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega1281__) + while(bit_is_set(EECR,EEPE)); //Wait for previous EEPROM writes to complete +#else + while(bit_is_set(EECR,EEWE)); //Wait for previous EEPROM writes to complete +#endif + asm volatile( + "clr r17 \n\t" //page_word_count + "lds r30,address \n\t" //Address of FLASH location (in bytes) + "lds r31,address+1 \n\t" + "ldi r28,lo8(buff) \n\t" //Start of buffer array in RAM + "ldi r29,hi8(buff) \n\t" + "lds r24,length \n\t" //Length of data to be written (in bytes) + "lds r25,length+1 \n\t" + "length_loop: \n\t" //Main loop, repeat for number of words in block + "cpi r17,0x00 \n\t" //If page_word_count=0 then erase page + "brne no_page_erase \n\t" + "wait_spm1: \n\t" + "lds r16,%0 \n\t" //Wait for previous spm to complete + "andi r16,1 \n\t" + "cpi r16,1 \n\t" + "breq wait_spm1 \n\t" + "ldi r16,0x03 \n\t" //Erase page pointed to by Z + "sts %0,r16 \n\t" + "spm \n\t" +#ifdef __AVR_ATmega163__ + ".word 0xFFFF \n\t" + "nop \n\t" +#endif + "wait_spm2: \n\t" + "lds r16,%0 \n\t" //Wait for previous spm to complete + "andi r16,1 \n\t" + "cpi r16,1 \n\t" + "breq wait_spm2 \n\t" + + "ldi r16,0x11 \n\t" //Re-enable RWW section + "sts %0,r16 \n\t" + "spm \n\t" +#ifdef __AVR_ATmega163__ + ".word 0xFFFF \n\t" + "nop \n\t" +#endif + "no_page_erase: \n\t" + "ld r0,Y+ \n\t" //Write 2 bytes into page buffer + "ld r1,Y+ \n\t" + + "wait_spm3: \n\t" + "lds r16,%0 \n\t" //Wait for previous spm to complete + "andi r16,1 \n\t" + "cpi r16,1 \n\t" + "breq wait_spm3 \n\t" + "ldi r16,0x01 \n\t" //Load r0,r1 into FLASH page buffer + "sts %0,r16 \n\t" + "spm \n\t" + + "inc r17 \n\t" //page_word_count++ + "cpi r17,%1 \n\t" + "brlo same_page \n\t" //Still same page in FLASH + "write_page: \n\t" + "clr r17 \n\t" //New page, write current one first + "wait_spm4: \n\t" + "lds r16,%0 \n\t" //Wait for previous spm to complete + "andi r16,1 \n\t" + "cpi r16,1 \n\t" + "breq wait_spm4 \n\t" +#ifdef __AVR_ATmega163__ + "andi r30,0x80 \n\t" // m163 requires Z6:Z1 to be zero during page write +#endif + "ldi r16,0x05 \n\t" //Write page pointed to by Z + "sts %0,r16 \n\t" + "spm \n\t" +#ifdef __AVR_ATmega163__ + ".word 0xFFFF \n\t" + "nop \n\t" + "ori r30,0x7E \n\t" // recover Z6:Z1 state after page write (had to be zero during write) +#endif + "wait_spm5: \n\t" + "lds r16,%0 \n\t" //Wait for previous spm to complete + "andi r16,1 \n\t" + "cpi r16,1 \n\t" + "breq wait_spm5 \n\t" + "ldi r16,0x11 \n\t" //Re-enable RWW section + "sts %0,r16 \n\t" + "spm \n\t" +#ifdef __AVR_ATmega163__ + ".word 0xFFFF \n\t" + "nop \n\t" +#endif + "same_page: \n\t" + "adiw r30,2 \n\t" //Next word in FLASH + "sbiw r24,2 \n\t" //length-2 + "breq final_write \n\t" //Finished + "rjmp length_loop \n\t" + "final_write: \n\t" + "cpi r17,0 \n\t" + "breq block_done \n\t" + "adiw r24,2 \n\t" //length+2, fool above check on length after short page write + "rjmp write_page \n\t" + "block_done: \n\t" + "clr __zero_reg__ \n\t" //restore zero register +#if defined __AVR_ATmega168__ || __AVR_ATmega328P__ || __AVR_ATmega128__ || __AVR_ATmega1280__ || __AVR_ATmega1281__ + : "=m" (SPMCSR) : "M" (PAGE_SIZE) : "r0","r16","r17","r24","r25","r28","r29","r30","r31" +#else + : "=m" (SPMCR) : "M" (PAGE_SIZE) : "r0","r16","r17","r24","r25","r28","r29","r30","r31" +#endif + ); + /* Should really add a wait for RWW section to be enabled, don't actually need it since we never */ + /* exit the bootloader without a power cycle anyhow */ + } + putch(0x14); + putch(0x10); + } else { + if (++error_count == MAX_ERROR_COUNT) + app_start(); + } + } + + + /* Read memory block mode, length is big endian. */ + else if(ch=='t') { + length.byte[1] = getch(); + length.byte[0] = getch(); +#if defined(__AVR_ATmega128__) || defined(__AVR_ATmega1280__) + if (address.word>0x7FFF) flags.rampz = 1; // No go with m256, FIXME + else flags.rampz = 0; +#endif + address.word = address.word << 1; // address * 2 -> byte location + if (getch() == 'E') flags.eeprom = 1; + else flags.eeprom = 0; + if (getch() == ' ') { // Command terminator + putch(0x14); + for (w=0;w < length.word;w++) { // Can handle odd and even lengths okay + if (flags.eeprom) { // Byte access EEPROM read +#if defined(__AVR_ATmega168__) || defined(__AVR_ATmega328P__) + while(EECR & (1<= 'a') { + return (a - 'a' + 0x0a); + } else if(a >= '0') { + return(a - '0'); + } + return a; +} + + +char gethex(void) { + return (gethexnib() << 4) + gethexnib(); +} + + +void puthex(char ch) { + char ah; + + ah = ch >> 4; + if(ah >= 0x0a) { + ah = ah - 0x0a + 'a'; + } else { + ah += '0'; + } + + ch &= 0x0f; + if(ch >= 0x0a) { + ch = ch - 0x0a + 'a'; + } else { + ch += '0'; + } + + putch(ah); + putch(ch); +} + + +void putch(char ch) +{ +#if defined(__AVR_ATmega128__) || defined(__AVR_ATmega1280__) + if(bootuart == 1) { + while (!(UCSR0A & _BV(UDRE0))); + UDR0 = ch; + } + else if (bootuart == 2) { + while (!(UCSR1A & _BV(UDRE1))); + UDR1 = ch; + } +#elif defined(__AVR_ATmega168__) || defined(__AVR_ATmega328P__) + while (!(UCSR0A & _BV(UDRE0))); + UDR0 = ch; +#else + /* m8,16,32,169,8515,8535,163 */ + while (!(UCSRA & _BV(UDRE))); + UDR = ch; +#endif +} + + +char getch(void) +{ +#if defined(__AVR_ATmega128__) || defined(__AVR_ATmega1280__) + uint32_t count = 0; + if(bootuart == 1) { + while(!(UCSR0A & _BV(RXC0))) { + /* 20060803 DojoCorp:: Addon coming from the previous Bootloader*/ + /* HACKME:: here is a good place to count times*/ + count++; + if (count > MAX_TIME_COUNT) + app_start(); + } + + return UDR0; + } + else if(bootuart == 2) { + while(!(UCSR1A & _BV(RXC1))) { + /* 20060803 DojoCorp:: Addon coming from the previous Bootloader*/ + /* HACKME:: here is a good place to count times*/ + count++; + if (count > MAX_TIME_COUNT) + app_start(); + } + + return UDR1; + } + return 0; +#elif defined(__AVR_ATmega168__) || defined(__AVR_ATmega328P__) + uint32_t count = 0; + while(!(UCSR0A & _BV(RXC0))){ + /* 20060803 DojoCorp:: Addon coming from the previous Bootloader*/ + /* HACKME:: here is a good place to count times*/ + count++; + if (count > MAX_TIME_COUNT) + app_start(); + } + return UDR0; +#else + /* m8,16,32,169,8515,8535,163 */ + uint32_t count = 0; + while(!(UCSRA & _BV(RXC))){ + /* 20060803 DojoCorp:: Addon coming from the previous Bootloader*/ + /* HACKME:: here is a good place to count times*/ + count++; + if (count > MAX_TIME_COUNT) + app_start(); + } + return UDR; +#endif +} + + +void getNch(uint8_t count) +{ + while(count--) { +#if defined(__AVR_ATmega128__) || defined(__AVR_ATmega1280__) + if(bootuart == 1) { + while(!(UCSR0A & _BV(RXC0))); + UDR0; + } + else if(bootuart == 2) { + while(!(UCSR1A & _BV(RXC1))); + UDR1; + } +#elif defined(__AVR_ATmega168__) || defined(__AVR_ATmega328P__) + getch(); +#else + /* m8,16,32,169,8515,8535,163 */ + /* 20060803 DojoCorp:: Addon coming from the previous Bootloader*/ + //while(!(UCSRA & _BV(RXC))); + //UDR; + getch(); // need to handle time out +#endif + } +} + + +void byte_response(uint8_t val) +{ + if (getch() == ' ') { + putch(0x14); + putch(val); + putch(0x10); + } else { + if (++error_count == MAX_ERROR_COUNT) + app_start(); + } +} + + +void nothing_response(void) +{ + if (getch() == ' ') { + putch(0x14); + putch(0x10); + } else { + if (++error_count == MAX_ERROR_COUNT) + app_start(); + } +} + +void flash_led(uint8_t count) +{ + while (count--) { + LED_PORT |= _BV(LED); + _delay_ms(100); + LED_PORT &= ~_BV(LED); + _delay_ms(100); + } +} + + +/* end of file ATmegaBOOT.c */ diff --git a/test/ardmake/hardware/bootloaders/atmega/ATmegaBOOT_168_atmega1280.hex b/test/ardmake/hardware/bootloaders/atmega/ATmegaBOOT_168_atmega1280.hex new file mode 100644 index 0000000..f16e877 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/atmega/ATmegaBOOT_168_atmega1280.hex @@ -0,0 +1,245 @@ +:020000021000EC +:10F000000C9472F80C9492F80C9492F80C9492F878 +:10F010000C9492F80C9492F80C9492F80C9492F848 +:10F020000C9492F80C9492F80C9492F80C9492F838 +:10F030000C9492F80C9492F80C9492F80C9492F828 +:10F040000C9492F80C9492F80C9492F80C9492F818 +:10F050000C9492F80C9492F80C9492F80C9492F808 +:10F060000C9492F80C9492F80C9492F80C9492F8F8 +:10F070000C9492F80C9492F80C9492F80C9492F8E8 +:10F080000C9492F80C9492F80C9492F80C9492F8D8 +:10F090000C9492F80C9492F80C9492F80C9492F8C8 +:10F0A0000C9492F80C9492F80C9492F80C9492F8B8 +:10F0B0000C9492F80C9492F80C9492F80C9492F8A8 +:10F0C0000C9492F80C9492F80C9492F80C9492F898 +:10F0D0000C9492F80C9492F80C9492F80C9492F888 +:10F0E0000C9492F811241FBECFEFD1E2DEBFCDBF4A +:10F0F00012E0A0E0B2E0EEEDFEEF01E00BBF02C0D7 +:10F1000007900D92A833B107D9F71BBE13E0A8E30F +:10F11000B2E001C01D92A334B107E1F70E9412FAD8 +:10F120000C946DFF0C9400F8982F959595959595F6 +:10F130009595905D8F708A301CF1282F295A809107 +:10F140003802813019F0823071F008958091C0004A +:10F1500085FFFCCF9093C6008091C00085FFFCCF57 +:10F160002093C60008958091C80085FFFCCF90933E +:10F17000CE008091C80085FFFCCF2093CE0008957B +:10F18000282F205DDCCF982F80913802813019F034 +:10F19000823041F008958091C00085FFFCCF9093AC +:10F1A000C60008958091C80085FFFCCF9093CE00E3 +:10F1B0000895EF92FF920F931F9380913802813050 +:10F1C00069F1823031F080E01F910F91FF90EF9054 +:10F1D0000895EE24FF2487018091C80087FD17C0A1 +:10F1E0000894E11CF11C011D111D81E4E81682E464 +:10F1F000F8068FE0080780E0180770F3E0913A0204 +:10F20000F0913B0209958091C80087FFE9CF80917A +:10F21000CE001F910F91FF90EF900895EE24FF24F0 +:10F2200087018091C00087FD17C00894E11CF11C84 +:10F23000011D111D81E4E81682E4F8068FE008073D +:10F2400080E0180770F3E0913A02F0913B020995D3 +:10F250008091C00087FFE9CF8091C6001F910F9178 +:10F26000FF90EF9008950E94D9F8982F809138026E +:10F27000813049F0823091F091366CF490330CF08B +:10F280009053892F08958091C00085FFFCCF909303 +:10F29000C60091369CF39755892F08958091C80038 +:10F2A00085FFFCCF9093CE00E7CF1F930E9433F9E8 +:10F2B000182F0E9433F91295107F810F1F91089526 +:10F2C000982F20913802992339F0213031F02230E3 +:10F2D00061F091509923C9F708958091C00087FF8C +:10F2E000FCCF8091C6009150F5CF8091C80087FF78 +:10F2F000FCCF8091CE009150EDCF1F93182F0E942C +:10F30000D9F8803249F0809139028F5F80933902B9 +:10F31000853091F11F910895809138028130B9F0C4 +:10F320008230C1F78091C80085FFFCCF84E18093D3 +:10F33000CE008091C80085FFFCCF1093CE00809155 +:10F34000C80085FFFCCF80E18093CE00E3CF8091A1 +:10F35000C00085FFFCCF84E18093C6008091C0008F +:10F3600085FFFCCF1093C6008091C00085FFFCCFC5 +:10F3700080E18093C600CECFE0913A02F0913B024B +:10F3800009951F9108950E94D9F8803241F080912B +:10F3900039028F5F80933902853029F10895809179 +:10F3A0003802813089F08230C9F78091C80085FF2A +:10F3B000FCCF84E18093CE008091C80085FFFCCF14 +:10F3C00080E18093CE0008958091C00085FFFCCF3E +:10F3D00084E18093C6008091C00085FFFCCF80E16E +:10F3E0008093C6000895E0913A02F0913B0209959E +:10F3F000089540E951E08823A1F02F9A28EE33E0E8 +:10F40000FA013197F1F721503040D1F72F9828EECB +:10F4100033E0FA013197F1F721503040D1F78150B4 +:10F4200061F708952F923F924F925F926F927F9271 +:10F430008F929F92AF92BF92CF92DF92EF92FF9204 +:10F440000F931F93CF93DF93000081E080933802E6 +:10F4500080E18093C4001092C5001092C00086E045 +:10F460008093C20088E18093C1006898709A279ABF +:10F4700081E00E94F9F9E4E1EE2E7EE1D72E67E902 +:10F48000C62E53E0B52E40E1A42E9924939431E486 +:10F49000832E26E5722E92E5692E80E2582E09E42D +:10F4A000402E13E5312EB0E52B2E0E94D9F8803383 +:10F4B000C9F1813309F452C0803409F4C8C08134E1 +:10F4C00009F4EAC0823489F1853409F4CAC0803570 +:10F4D00049F1823539F1813529F1853509F4ECC0DE +:10F4E000863509F409C1843609F428C1843709F442 +:10F4F000ABC1853709F473C2863709F4D9C08132AC +:10F5000009F4B7C2809139028F5F80933902853048 +:10F5100061F6E0913A02F0913B0209950E94D9F818 +:10F52000803339F60E94C3F9C0CF2091380293E1AD +:10F5300005C0223061F09923A9F391502130C9F719 +:10F540008091C00087FFFCCF8091C600F4CF8091EE +:10F55000C80087FFFCCF8091CE00EDCF0E94D9F884 +:10F56000803281F6809138028130D1F1823009F009 +:10F570009CCF8091C80085FFFCCFE092CE008091A7 +:10F58000C80085FFFCCF8092CE008091C80085FF27 +:10F59000FCCF7092CE008091C80085FFFCCF6092B6 +:10F5A000CE008091C80085FFFCCF5092CE008091A4 +:10F5B000C80085FFFCCF4092CE008091C80085FF37 +:10F5C000FCCF3092CE008091C80085FFFCCF209206 +:10F5D000CE008091C80085FFFCCFA092CE0065CF01 +:10F5E0008091C00085FFFCCFE092C6008091C000F2 +:10F5F00085FFFCCF8092C6008091C00085FFFCCFC4 +:10F600007092C6008091C00085FFFCCF6092C6005A +:10F610008091C00085FFFCCF5092C6008091C00051 +:10F6200085FFFCCF4092C6008091C00085FFFCCFD3 +:10F630003092C6008091C00085FFFCCF2092C600AA +:10F640008091C00085FFFCCFA092C6002ECF0E9403 +:10F65000D9F8863808F466CF0E94D9F80E94C3F919 +:10F6600024CF2091380294E0213041F0223069F01B +:10F67000992309F457CF91502130C1F78091C000F0 +:10F6800087FFFCCF8091C600F3CF8091C80087FF31 +:10F69000FCCF8091CE00ECCF0E94D9F8803841F1A8 +:10F6A000813809F447C0823809F4CAC08839E1F0CA +:10F6B00080E00E947DF9F9CE0E94D9F880933C0247 +:10F6C0000E94D9F880933D020E94C3F9EECE0E94B9 +:10F6D000D9F80E94D9F8182F0E94D9F8112309F4FB +:10F6E0007EC2113009F40AC283E00E947DF9DDCEAA +:10F6F00082E00E947DF9D9CE0E94D9F8803339F397 +:10F700002091380292E0213039F0223061F09923C3 +:10F7100079F291502130C9F78091C00087FFFCCF6A +:10F720008091C600F4CF8091C80087FFFCCF809104 +:10F73000CE00EDCF81E00E947DF9B7CE0E94D9F8CE +:10F7400080933F030E94D9F880933E038091420347 +:10F750008E7F809342030E94D9F8853409F4B3C1A7 +:10F7600080913E0390913F03892B89F000E010E0E7 +:10F770000E94D9F8F801E25CFD4F80830F5F1F4FB4 +:10F7800080913E0390913F030817190788F30E9468 +:10F79000D9F8803209F0B6CE8091420380FFB2C121 +:10F7A00040913C0250913D02440F551F50933D0241 +:10F7B00040933C0260913E0370913F0361157105D7 +:10F7C000F1F080E090E09A01280F391FFC01E25C23 +:10F7D000FD4FE081F999FECF1FBA32BD21BDE0BDDA +:10F7E0000FB6F894FA9AF99A0FBE01968617970702 +:10F7F00050F3460F571F50933D0240933C028091B7 +:10F800003802813081F0823009F04FCE8091C800FB +:10F8100085FFFCCFE092CE008091C80085FFFCCF31 +:10F82000A092CE0042CE8091C00085FFFCCFE09236 +:10F83000C6008091C00085FFFCCFA092C60035CEE7 +:10F8400080E10E947DF931CE0E94D9F880933F0378 +:10F850000E94D9F880933E0320913C0230913D02F2 +:10F8600037FD46C1809142038D7F80934203220F72 +:10F87000331F30933D0220933C020E94D9F8853417 +:10F8800009F430C1809142038E7F809342030E942D +:10F89000D9F8803209F009CE60913802613009F45C +:10F8A0006FC0623009F473C000913E0310913F03B2 +:10F8B0000115110509F440C080914203782F717041 +:10F8C000F82EF69481E0F82240913C0250913D02DE +:10F8D00020E030E013C0FF2009F060C0FA019491ED +:10F8E000613009F43BC0623009F441C0CA0101969D +:10F8F0002F5F3F4FAC0120173107D0F4772359F326 +:10F90000F999FECF52BD41BDF89A90B56130F9F03A +:10F91000623061F78091C80085FFFCCF9093CE00E4 +:10F92000CA0101962F5F3F4FAC012017310730F31A +:10F9300090933D0280933C02613009F4CAC062306A +:10F9400009F0B3CD8091C80085FFFCCF46CE8091F1 +:10F95000C00085FFFCCF9093C600C8CF8091C00047 +:10F9600085FDF9CF8091C00085FFF8CFF4CF80915D +:10F97000C80085FDD3CF8091C80085FFF8CFCECFDA +:10F980008091C00085FFFCCFE092C6008DCF8091B2 +:10F99000C80085FFFCCFE092CE0086CFCA01A0E070 +:10F9A000B0E080509040AF4FBF4FABBFFC0197918C +:10F9B000613061F0623009F099CF8091C80085FD17 +:10F9C000ADCF8091C80085FFF8CFA8CF8091C0004F +:10F9D00085FDC1CF8091C00085FFF8CFBCCF0E94CC +:10F9E000D9F8803209F08ECD80913802813011F142 +:10F9F000823009F05ACD8091C80085FFFCCFE0929B +:10FA0000CE008091C80085FFFCCFD092CE008091BF +:10FA1000C80085FFFCCFC092CE008091C80085FF52 +:10FA2000FCCFB092CE008091C80085FFFCCFA092A1 +:10FA3000CE003BCD8091C00085FFFCCFE092C60098 +:10FA40008091C00085FFFCCFD092C6008091C0009D +:10FA500085FFFCCFC092C6008091C00085FFFCCF1F +:10FA6000B092C6008091C00085FFFCCFA092C60076 +:10FA70001CCD0E94D9F8813209F017CD0E94D9F827 +:10FA8000813209F012CD279A2F98109240032091CD +:10FA90003802E1E491E00EC0223009F4A4C0909352 +:10FAA0004003E92FF0E0E050FE4FE0819F5FEE233E +:10FAB00009F4A0C0213081F78091C00085FFFCCF00 +:10FAC000E093C600ECCF80914203816080934203B3 +:10FAD00047CE8091C00085FDB7CD8091C00085FFE5 +:10FAE000F8CFB2CD80914203816080934203CFCEA4 +:10FAF00080914203826080934203B9CE87E90E94DD +:10FB00007DF9D3CC80913D028823880F880B892111 +:10FB1000809341038BBF80913C0290913D02880FFE +:10FB2000991F90933D0280933C0280913E0380FF99 +:10FB300009C080913E0390913F03019690933F034B +:10FB400080933E03F894F999FECF1127E0913C028F +:10FB5000F0913D02CEE3D2E080913E0390913F03CD +:10FB6000103091F40091570001700130D9F303E097 +:10FB700000935700E8950091570001700130D9F3C8 +:10FB800001E100935700E895099019900091570002 +:10FB900001700130D9F301E000935700E895139507 +:10FBA000103898F011270091570001700130D9F3F7 +:10FBB00005E000935700E89500915700017001306F +:10FBC000D9F301E100935700E8953296029709F0C6 +:10FBD000C7CF103011F00296E5CF112410CE8EE180 +:10FBE0000E947DF962CC8091C80085FFFCCFE09334 +:10FBF000CE0055CF7AE0B72E6DE0A62E5AE3952EB3 +:10FC000040E2842E3DE3732E90E3692E81E3582E6B +:10FC1000213009F442C0223009F45FC00E94D9F8B3 +:10FC2000982F20913802213089F1223009F44EC0FA +:10FC3000943709F46BC0923709F405C1973709F47A +:10FC40007BC0953799F0923609F4BDC09A3601F71A +:10FC5000E0913A02F0913B02099520913802D8CF09 +:10FC60008091C00085FFFCCF9093C6000E94D9F818 +:10FC7000982F80913802813099F38230B9F78091C2 +:10FC8000C80085FFFCCF9093CE00F0CF8091C000DC +:10FC900085FFFCCF9093C600CBCF8091C00085FF3D +:10FCA000FCCFB092C6008091C00085FFFCCFA0922F +:10FCB000C6008091C00085FFFCCF9092C600809165 +:10FCC000C00085FFFCCF8092C600A8CF8091C800FD +:10FCD00085FFFCCF9093CE00ABCF8091C80085FF0D +:10FCE000FCCFB092CE008091C80085FFFCCFA092DF +:10FCF000CE008091C80085FFFCCF9092CE0080910D +:10FD0000C80085FFFCCF8092CE0088CF1F9947C0E6 +:10FD10002F9A213051F0223009F07ACF8091C8001B +:10FD200085FFFCCF6092CE0073CF8091C00085FF2D +:10FD3000FCCF6092C6006CCF0E94D9F8982F8091BA +:10FD400038028130F1F0823009F4ABC00E9455F9DD +:10FD5000082F0E9455F9182F0E94D9F8982F8091EA +:10FD600038028130A9F0823009F4A2C00E9455F90E +:10FD7000D02ECC24F601E10FF11D808320913802B2 +:10FD800047CF8091C00085FFFCCF9093C600DECFA7 +:10FD90008091C00085FFFCCF9093C600E7CF2F98DD +:10FDA000213051F0223009F033CF8091C80085FF17 +:10FDB000FCCF5092CE002CCF8091C00085FFFCCFAD +:10FDC0005092C60025CF213041F1223081F080E8E9 +:10FDD00085BF109274001092750080E091E1FC01E3 +:10FDE000819180E091E13097D1F3CF01F8CF8091FC +:10FDF000C80085FFFCCF82E68093CE008091C800CA +:10FE000085FFFCCF85E78093CE008091C80085FFF9 +:10FE1000FCCF83E78093CE00DACF8091C00085FFCE +:10FE2000FCCF82E68093C6008091C00085FFFCCFA6 +:10FE300085E78093C6008091C00085FFFCCF83E7F3 +:10FE40008093C600C4CF0E94D9F8982F80913802C1 +:10FE50008130C9F08230D1F10E9455F9182F0E94EB +:10FE600055F9982F809138028130A1F0823039F114 +:10FE7000F12EEE24F701E90FF11D80810E9494F824 +:10FE800020913802C5CE8091C00085FFFCCF9093B1 +:10FE9000C600E2CF8091C00085FFFCCF7092C60003 +:10FEA000E7CF8091C80085FFFCCF9093CE004ECF66 +:10FEB0008091C80085FFFCCF9093CE0057CF8091F2 +:10FEC000C80085FFFCCF7092CE00D2CF8091C800D1 +:0EFED00085FFFCCF9093CE00BFCFF894FFCFFC +:10FEDE0041546D656761424F4F54202F204172642B +:10FEEE0075696E6F204D656761202D20284329208E +:10FEFE0041726475696E6F204C4C43202D20303951 +:08FF0E00303933300A0D008088 +:040000031000F000F9 +:00000001FF diff --git a/test/ardmake/hardware/bootloaders/atmega/ATmegaBOOT_168_atmega328.hex b/test/ardmake/hardware/bootloaders/atmega/ATmegaBOOT_168_atmega328.hex new file mode 100644 index 0000000..43a8b30 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/atmega/ATmegaBOOT_168_atmega328.hex @@ -0,0 +1,125 @@ +:107800000C94343C0C94513C0C94513C0C94513CE1 +:107810000C94513C0C94513C0C94513C0C94513CB4 +:107820000C94513C0C94513C0C94513C0C94513CA4 +:107830000C94513C0C94513C0C94513C0C94513C94 +:107840000C94513C0C94513C0C94513C0C94513C84 +:107850000C94513C0C94513C0C94513C0C94513C74 +:107860000C94513C0C94513C11241FBECFEFD8E036 +:10787000DEBFCDBF11E0A0E0B1E0ECE9FFE702C060 +:1078800005900D92A230B107D9F712E0A2E0B1E065 +:1078900001C01D92AD30B107E1F70E942D3D0C945F +:1078A000CC3F0C94003C982F959595959595959582 +:1078B000905D8F708A307CF0282F295A8091C0000B +:1078C00085FFFCCF9093C6008091C00085FFFCCF60 +:1078D0002093C6000895282F205DF0CF982F809127 +:1078E000C00085FFFCCF9093C6000895EF92FF92F1 +:1078F0000F931F93EE24FF2487018091C00087FD22 +:1079000017C00894E11CF11C011D111D81E4E8164B +:1079100082E4F8068FE0080780E0180770F3E09132 +:107920000401F091050109958091C00087FFE9CF1E +:107930008091C6001F910F91FF90EF9008950E94D3 +:10794000763C982F8091C00085FFFCCF9093C600B5 +:1079500091362CF490330CF09053892F089597555D +:10796000892F08951F930E949F3C182F0E949F3CCF +:107970001295107F810F1F9108951F93182F882350 +:1079800021F00E94763C1150E1F71F9108951F935A +:10799000182F0E94763C803249F0809103018F5F5E +:1079A000809303018530C1F01F9108958091C0003C +:1079B00085FFFCCF84E18093C6008091C00085FFE5 +:1079C000FCCF1093C6008091C00085FFFCCF80E102 +:1079D0008093C6001F910895E0910401F091050184 +:1079E00009951F9108950E94763C803241F0809164 +:1079F00003018F5F80930301853081F008958091AA +:107A0000C00085FFFCCF84E18093C6008091C00058 +:107A100085FFFCCF80E18093C6000895E0910401CA +:107A2000F09105010995089540E951E08823A1F0FE +:107A30002D9A28EE33E0FA013197F1F721503040CA +:107A4000D1F72D9828EE33E0FA013197F1F7215064 +:107A50003040D1F7815061F708953F924F925F9285 +:107A60006F927F928F929F92AF92BF92CF92DF924E +:107A7000EF92FF920F931F93CF93DF93000080E16B +:107A80008093C4001092C50088E18093C10086E015 +:107A90008093C2005098589A259A81E00E94143D24 +:107AA00024E1F22E9EE1E92E85E9D82E0FE0C02ECA +:107AB00010E1B12EAA24A394B1E49B2EA6E58A2E50 +:107AC000F2E57F2EE0E26E2E79E4572E63E5462E36 +:107AD00050E5352E0E94763C8033B1F18133B9F107 +:107AE000803409F46FC0813409F476C0823409F41B +:107AF00085C0853409F488C0803531F1823521F1A3 +:107B0000813511F1853509F485C0863509F48DC0BC +:107B1000843609F496C0843709F403C1853709F423 +:107B200072C1863709F466C0809103018F5F80932C +:107B30000301853079F6E0910401F0910501099582 +:107B40000E94763C803351F60E94F33CC3CF0E94E2 +:107B5000763C803249F78091C00085FFFCCFF092DF +:107B6000C6008091C00085FFFCCF9092C600809136 +:107B7000C00085FFFCCF8092C6008091C00085FFC9 +:107B8000FCCF7092C6008091C00085FFFCCF609250 +:107B9000C6008091C00085FFFCCF5092C600809146 +:107BA000C00085FFFCCF4092C6008091C00085FFD9 +:107BB000FCCF3092C6008091C00085FFFCCFB09210 +:107BC000C60088CF0E94763C863808F4BDCF0E945C +:107BD000763C0E94F33C7ECF0E94763C803809F4CC +:107BE0009CC0813809F40BC1823809F43CC1883942 +:107BF00009F48FC080E00E94C73C6CCF84E10E94F2 +:107C0000BD3C0E94F33C66CF85E00E94BD3C0E94D3 +:107C1000F33C60CF0E94763C809306010E94763C44 +:107C2000809307010E94F33C55CF0E94763C80333D +:107C300009F41DC183E00E94BD3C80E00E94C73C66 +:107C400049CF0E94763C809309020E94763C809343 +:107C5000080280910C028E7F80930C020E94763C79 +:107C6000853409F415C18091080290910902892B8D +:107C700089F000E010E00E94763CF801E85FFE4FDA +:107C800080830F5F1F4F80910802909109020817AF +:107C9000190788F30E94763C803209F045CF809125 +:107CA0000C0280FF01C16091060170910701660F0F +:107CB000771F7093070160930601A0910802B091AD +:107CC00009021097C9F0E8E0F1E09B01AD014E0F09 +:107CD0005F1FF999FECF32BD21BD819180BDFA9A17 +:107CE000F99A2F5F3F4FE417F50799F76A0F7B1F4B +:107CF00070930701609306018091C00085FFFCCF5F +:107D0000F092C6008091C00085FFFCCFB092C60003 +:107D1000E1CE83E00E94C73CDDCE82E00E94C73CFA +:107D2000D9CE0E94763C809309020E94763C8093D3 +:107D300008028091060190910701880F991F909386 +:107D40000701809306010E94763C853409F4A6C0A1 +:107D500080910C028E7F80930C020E94763C8032D0 +:107D600009F0B8CE8091C00085FFFCCFF092C6002C +:107D7000609108027091090261157105B9F140E046 +:107D800050E080910C02A82FA170B82FB27011C0E2 +:107D9000BB2309F45CC0E0910601F0910701319624 +:107DA000F0930701E09306014F5F5F4F46175707B7 +:107DB000E8F4AA2369F3F999FECF209106013091E6 +:107DC000070132BD21BDF89A90B58091C00085FFB2 +:107DD000FCCF9093C6002F5F3F4F30930701209355 +:107DE00006014F5F5F4F4617570718F38091C00099 +:107DF00085FDE5CE8091C00085FFF8CFE0CE81E023 +:107E00000E94C73C67CE0E94763C803209F08CCE3F +:107E10008091C00085FFFCCFF092C6008091C00029 +:107E200085FFFCCFE092C6008091C00085FFFCCFAB +:107E3000D092C6008091C00085FFFCCFC092C600E2 +:107E40008091C00085FFFCCFB092C60043CEE09188 +:107E50000601F091070194918091C00085FFFCCF4D +:107E60009093C6009CCF80E10E94C73C33CE0E9415 +:107E7000763C0E94763C182F0E94763C112309F430 +:107E800083C0113009F484C08FE00E94C73C22CE29 +:107E900080910C02816080930C02E5CE80910C02EF +:107EA000816080930C0259CF809107018823880F4D +:107EB000880B8A2180930B02809106019091070123 +:107EC000880F991F90930701809306018091080203 +:107ED00080FF09C080910802909109020196909359 +:107EE000090280930802F894F999FECF1127E091D6 +:107EF0000601F0910701C8E0D1E08091080290915D +:107F00000902103091F40091570001700130D9F34B +:107F100003E000935700E89500915700017001308D +:107F2000D9F301E100935700E89509901990009169 +:107F3000570001700130D9F301E000935700E89534 +:107F40001395103498F011270091570001700130FB +:107F5000D9F305E000935700E895009157000170B0 +:107F60000130D9F301E100935700E895329602976A +:107F700009F0C7CF103011F00296E5CF112480919F +:107F8000C00085FFB9CEBCCE8EE10E94C73CA2CD19 +:0C7F900085E90E94C73C9ECDF894FFCF0D +:027F9C00800063 +:040000030000780081 +:00000001FF diff --git a/test/ardmake/hardware/bootloaders/atmega/ATmegaBOOT_168_atmega328_pro_8MHz.hex b/test/ardmake/hardware/bootloaders/atmega/ATmegaBOOT_168_atmega328_pro_8MHz.hex new file mode 100644 index 0000000..9753e2e --- /dev/null +++ b/test/ardmake/hardware/bootloaders/atmega/ATmegaBOOT_168_atmega328_pro_8MHz.hex @@ -0,0 +1,124 @@ +:107800000C94343C0C94513C0C94513C0C94513CE1 +:107810000C94513C0C94513C0C94513C0C94513CB4 +:107820000C94513C0C94513C0C94513C0C94513CA4 +:107830000C94513C0C94513C0C94513C0C94513C94 +:107840000C94513C0C94513C0C94513C0C94513C84 +:107850000C94513C0C94513C0C94513C0C94513C74 +:107860000C94513C0C94513C11241FBECFEFD8E036 +:10787000DEBFCDBF11E0A0E0B1E0EAE8FFE702C063 +:1078800005900D92A230B107D9F712E0A2E0B1E065 +:1078900001C01D92AD30B107E1F70E942D3D0C945F +:1078A000C33F0C94003C982F95959595959595958B +:1078B000905D8F708A307CF0282F295A8091C0000B +:1078C00085FFFCCF9093C6008091C00085FFFCCF60 +:1078D0002093C6000895282F205DF0CF982F809127 +:1078E000C00085FFFCCF9093C6000895EF92FF92F1 +:1078F0000F931F93EE24FF2487018091C00087FD22 +:1079000017C00894E11CF11C011D111D81E2E8164D +:1079100081EAF80687E0080780E0180770F3E09135 +:107920000401F091050109958091C00087FFE9CF1E +:107930008091C6001F910F91FF90EF9008950E94D3 +:10794000763C982F8091C00085FFFCCF9093C600B5 +:1079500091362CF490330CF09053892F089597555D +:10796000892F08951F930E949F3C182F0E949F3CCF +:107970001295107F810F1F9108951F93182F882350 +:1079800021F00E94763C1150E1F71F9108951F935A +:10799000182F0E94763C803249F0809103018F5F5E +:1079A000809303018530C1F01F9108958091C0003C +:1079B00085FFFCCF84E18093C6008091C00085FFE5 +:1079C000FCCF1093C6008091C00085FFFCCF80E102 +:1079D0008093C6001F910895E0910401F091050184 +:1079E00009951F9108950E94763C803241F0809164 +:1079F00003018F5F80930301853081F008958091AA +:107A0000C00085FFFCCF84E18093C6008091C00058 +:107A100085FFFCCF80E18093C6000895E0910401CA +:107A2000F09105010995089548EC50E08823A1F0F4 +:107A30002D9A28EE33E0FA013197F1F721503040CA +:107A4000D1F72D9828EE33E0FA013197F1F7215064 +:107A50003040D1F7815061F708953F924F925F9285 +:107A60006F927F928F929F92AF92BF92CF92DF924E +:107A7000EF92FF920F931F93CF93DF93000082E06A +:107A80008093C00080E18093C4001092C50088E11B +:107A90008093C10086E08093C2005098589A259A3E +:107AA00081E00E94143D24E1F22E9EE1E92E85E959 +:107AB000D82E0FE0C02E10E1B12EAA24A394B1E479 +:107AC0009B2EA6E58A2EF2E57F2EE0E26E2E79E46B +:107AD000572E63E5462E50E5352E0E94763C8033C6 +:107AE000B1F18133B9F1803409F46FC0813409F404 +:107AF00076C0823409F485C0853409F488C08035A5 +:107B000031F1823521F1813511F1853509F485C0D6 +:107B1000863509F48DC0843609F496C0843709F49B +:107B200003C1853709F472C1863709F466C08091B4 +:107B300003018F5F80930301853079F6E0910401A2 +:107B4000F091050109950E94763C803351F60E9420 +:107B5000F33CC3CF0E94763C803249F78091C0004D +:107B600085FFFCCFF092C6008091C00085FFFCCF5E +:107B70009092C6008091C00085FFFCCF8092C60025 +:107B80008091C00085FFFCCF7092C6008091C0003C +:107B900085FFFCCF6092C6008091C00085FFFCCFBE +:107BA0005092C6008091C00085FFFCCF4092C60075 +:107BB0008091C00085FFFCCF3092C6008091C0004C +:107BC00085FFFCCFB092C60088CF0E94763C8638F5 +:107BD00008F4BDCF0E94763C0E94F33C7ECF0E9409 +:107BE000763C803809F49CC0813809F40BC1823896 +:107BF00009F430C1883909F48FC080E00E94C73C85 +:107C00006CCF84E10E94BD3C0E94F33C66CF85E0CE +:107C10000E94BD3C0E94F33C60CF0E94763C809362 +:107C200006010E94763C809307010E94F33C55CFE9 +:107C30000E94763C803309F411C183E00E94BD3C70 +:107C400080E00E94C73C49CF0E94763C80930902A5 +:107C50000E94763C8093080280910C028E7F809374 +:107C60000C020E94763C853409F409C18091080217 +:107C700090910902892B89F000E010E00E94763C87 +:107C8000F801E85FFE4F80830F5F1F4F809108026D +:107C9000909109020817190788F30E94763C8032F8 +:107CA00009F045CF80910C0280FFF5C0609106017C +:107CB00070910701660F771F7093070160930601AB +:107CC000A0910802B09109021097C9F0E8E0F1E034 +:107CD0009B01AD014E0F5F1FF999FECF32BD21BD53 +:107CE000819180BDFA9AF99A2F5F3F4FE417F5070B +:107CF00099F76A0F7B1F70930701609306018091CB +:107D0000C00085FFFCCFF092C6008091C00085FFC7 +:107D1000FCCFB092C600E1CE83E00E94C73CDDCE2E +:107D200082E00E94C73CD9CE0E94763C8093090233 +:107D30000E94763C80930802809106019091070191 +:107D4000880F991F90930701809306010E94763C4B +:107D5000853409F49AC080910C028E7F80930C02C6 +:107D60000E94763C803209F0B8CE8091C00085FF39 +:107D7000FCCFF092C600A0910802B09109021097C2 +:107D8000C1F180910C02082F0170182F1695117007 +:107D9000E0910601F0910701AF014F5F5F4FBA011B +:107DA00020E030E00023B1F4112339F49491809164 +:107DB000C00085FFFCCF9093C6002F5F3F4FCB01E3 +:107DC0000196FA012A173B0780F4BC014F5F5F4F11 +:107DD000002351F3F999FECFF2BDE1BDF89A90B5B9 +:107DE0008091C00085FFFCCFE6CF709307016093C0 +:107DF00006018091C00085FDE5CE8091C00085FF21 +:107E0000F8CFE0CE81E00E94C73C67CE0E94763C6E +:107E1000803209F08CCE8091C00085FFFCCFF092BB +:107E2000C6008091C00085FFFCCFE092C600809123 +:107E3000C00085FFFCCFD092C6008091C00085FFB6 +:107E4000FCCFC092C6008091C00085FFFCCFB092ED +:107E5000C60043CE80E10E94C73C3FCE0E94763CE4 +:107E60000E94763C182F0E94763C112309F483C0AF +:107E7000113009F484C08FE00E94C73C2ECE80915F +:107E80000C02816080930C02F1CE80910C02816023 +:107E900080930C0265CF809107018823880F880B9F +:107EA0008A2180930B028091060190910701880F2F +:107EB000991F90930701809306018091080280FF2B +:107EC00009C08091080290910902019690930902DD +:107ED00080930802F894F999FECF1127E0910601EA +:107EE000F0910701C8E0D1E0809108029091090269 +:107EF000103091F40091570001700130D9F303E084 +:107F000000935700E8950091570001700130D9F3B4 +:107F100001E100935700E8950990199000915700EE +:107F200001700130D9F301E000935700E8951395F3 +:107F3000103498F011270091570001700130D9F3E7 +:107F400005E000935700E89500915700017001305B +:107F5000D9F301E100935700E8953296029709F0B2 +:107F6000C7CF103011F00296E5CF11248091C000E8 +:107F700085FFC5CEC8CE8EE10E94C73CAECD85E957 +:0A7F80000E94C73CAACDF894FFCF81 +:027F8A00800075 +:040000030000780081 +:00000001FF diff --git a/test/ardmake/hardware/bootloaders/atmega/ATmegaBOOT_168_diecimila.hex b/test/ardmake/hardware/bootloaders/atmega/ATmegaBOOT_168_diecimila.hex new file mode 100644 index 0000000..feac9d2 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/atmega/ATmegaBOOT_168_diecimila.hex @@ -0,0 +1,126 @@ +:103800000C94341C0C94511C0C94511C0C94511CA1 +:103810000C94511C0C94511C0C94511C0C94511C74 +:103820000C94511C0C94511C0C94511C0C94511C64 +:103830000C94511C0C94511C0C94511C0C94511C54 +:103840000C94511C0C94511C0C94511C0C94511C44 +:103850000C94511C0C94511C0C94511C0C94511C34 +:103860000C94511C0C94511C11241FBECFEFD4E0BA +:10387000DEBFCDBF11E0A0E0B1E0E4EAFFE302C0AB +:1038800005900D92A230B107D9F712E0A2E0B1E0A5 +:1038900001C01D92AD30B107E1F70E94361D0C94B6 +:1038A000D01F0C94001C982F9595959595959595FE +:1038B000905D8F708A307CF0282F295A8091C0004B +:1038C00085FFFCCF9093C6008091C00085FFFCCFA0 +:1038D0002093C6000895282F205DF0CF982F809167 +:1038E000C00085FFFCCF9093C6000895EF92FF9231 +:1038F0000F931F93EE24FF2487018091C00087FD62 +:1039000017C00894E11CF11C011D111D81E4E8168B +:1039100082E4F8068FE0080780E0180770F3E09172 +:103920000401F091050109958091C00087FFE9CF5E +:103930008091C6001F910F91FF90EF9008950E9413 +:10394000761C982F8091C00085FFFCCF9093C60015 +:1039500091362CF490330CF09053892F089597559D +:10396000892F08951F930E949F1C182F0E949F1C4F +:103970001295107F810F1F910895882351F0982F81 +:1039800091508091C00087FFFCCF8091C6009923A1 +:10399000B9F708951F93182F0E94761C803249F0C2 +:1039A000809103018F5F809303018530C1F01F91E7 +:1039B00008958091C00085FFFCCF84E18093C6000C +:1039C0008091C00085FFFCCF1093C6008091C0009D +:1039D00085FFFCCF80E18093C6001F910895E091A0 +:1039E0000401F091050109951F9108950E94761C2C +:1039F000803241F0809103018F5F80930301853015 +:103A000081F008958091C00085FFFCCF84E1809310 +:103A1000C6008091C00085FFFCCF80E18093C60086 +:103A20000895E0910401F09105010995089510921F +:103A30000A028823D1F090E040E951E02D9A28EE67 +:103A400033E0FA013197F1F721503040D1F72D984A +:103A500028EE33E0FA013197F1F721503040D1F7E9 +:103A60009F5F981758F380930A0208953F924F92F0 +:103A70005F926F927F928F929F92AF92BF92CF92FE +:103A8000DF92EF92FF920F931F93CF93DF9300008B +:103A900083E38093C4001092C50088E18093C10045 +:103AA00086E08093C2005098589A259A81E00E943F +:103AB000171D44E1F42E3EE1E32E24E9D22E96E0D8 +:103AC000C92E80E1B82EAA24A39401E4902E16E515 +:103AD000812EB2E57B2EA0E26A2EF9E45F2EE3E5AB +:103AE0004E2E70E5372E0E94761C8033B1F1813363 +:103AF00009F441C0803409F479C0813409F48CC0E0 +:103B0000823471F1853409F47BC0803531F182351E +:103B100021F1813511F1853509F48DC0863509F41F +:103B20009DC0843609F4AEC0843709F41BC18537C3 +:103B300009F485C1863709F47AC0809103018F5F4B +:103B400080930301853079F6E0910401F09105013D +:103B500009950E94761C803351F60E94F61CC3CF53 +:103B600093E18091C00087FFFCCF8091C60099232C +:103B7000A1F39150F6CF0E94761C8032F1F680912D +:103B8000C00085FFFCCFF092C6008091C00085FF89 +:103B9000FCCF9092C6008091C00085FFFCCF809240 +:103BA000C6008091C00085FFFCCF7092C600809156 +:103BB000C00085FFFCCF6092C6008091C00085FFE9 +:103BC000FCCF5092C6008091C00085FFFCCF409290 +:103BD000C6008091C00085FFFCCF3092C600809166 +:103BE000C00085FFFCCFB092C6007DCF0E94761C3E +:103BF000863808F4B2CF0E94761C0E94F61C73CF60 +:103C000094E08091C00087FFFCCF8091C60099238B +:103C100009F4A3CF9150F5CF0E94761C8038D1F0E3 +:103C2000813861F1823809F499C0883979F080E0EF +:103C30000E94CA1C58CF0E94761C809306010E94E5 +:103C4000761C809307010E94F61C4DCF83E00E94F2 +:103C5000CA1C49CF82E00E94CA1C45CF0E94761C34 +:103C6000803309F486C192E08091C00087FFFCCFC9 +:103C70008091C6009923D9F29150F6CF81E00E943D +:103C8000CA1C31CF0E94761C809309020E94761CC8 +:103C90008093080280910C028E7F80930C020E9418 +:103CA000761C853429F480910C02816080930C028B +:103CB0008091080290910902892B89F000E010E0C0 +:103CC0000E94761CF801E85FFE4F80830F5F1F4F54 +:103CD00080910802909109020817190788F30E9441 +:103CE000761C803209F029CF80910C0280FFD1C070 +:103CF0004091060150910701440F551F5093070151 +:103D000040930601A0910802B09109021097C9F0F2 +:103D1000E8E0F1E09A01BD016E0F7F1FF999FECF37 +:103D200032BD21BD819180BDFA9AF99A2F5F3F4F34 +:103D3000E617F70799F74A0F5B1F50930701409367 +:103D400006018091C00085FFFCCFF092C6008091F3 +:103D5000C00085FFFCCFB092C600C5CE80E10E94B6 +:103D6000CA1CC1CE0E94761C809309020E94761C58 +:103D7000809308028091060190910701880F991F96 +:103D800090930701809306010E94761C853409F404 +:103D90007AC080910C028E7F80930C020E94761C68 +:103DA000803209F0A0CE8091C00085FFFCCFF09258 +:103DB000C600A0910802B09109021097B9F1809154 +:103DC0000C02182F1170082F0270E0910601F0917B +:103DD00007019F012F5F3F4FB90140E050E01123E1 +:103DE000B1F4002339F494918091C00085FFFCCF99 +:103DF0009093C6004F5F5F4FCB010196F9014A17C0 +:103E00005B0780F4BC012F5F3F4F112351F3F999F9 +:103E1000FECFF2BDE1BDF89A90B58091C00085FF5C +:103E2000FCCFE6CF70930701609306018091C0003C +:103E300085FDD9CE8091C00085FFF8CFD4CE0E94F9 +:103E4000761C803209F079CE8091C00085FFFCCFCE +:103E5000F092C6008091C00085FFFCCFE092C600C2 +:103E60008091C00085FFFCCFD092C6008091C00039 +:103E700085FFFCCFC092C6008091C00085FFFCCFBB +:103E8000B092C60030CE80910C02816080930C020B +:103E900085CF809107018823880F880B8A21809322 +:103EA0000B028091060190910701880F991F909352 +:103EB0000701809306018091080280FF09C080916C +:103EC00008029091090201969093090280930802DA +:103ED000F894F999FECF1127E0910601F0910701BE +:103EE000C8E0D1E08091080290910902103091F46D +:103EF0000091570001700130D9F303E0009357009F +:103F0000E8950091570001700130D9F301E1009369 +:103F10005700E89509901990009157000170013001 +:103F2000D9F301E000935700E8951395103498F009 +:103F300011270091570001700130D9F305E000937B +:103F40005700E8950091570001700130D9F301E165 +:103F500000935700E8953296029709F0C7CF1030CA +:103F600011F00296E5CF11248091C00085FFE9CEC3 +:103F7000ECCE0E94761C0E94761C182F0E94761CA4 +:103F8000112351F0113021F086E00E94CA1CABCD04 +:103F900084E90E94CA1CA7CD8EE10E94CA1CA3CD51 +:043FA000F894FFCFC3 +:023FA40080009B +:0400000300003800C1 +:00000001FF diff --git a/test/ardmake/hardware/bootloaders/atmega/ATmegaBOOT_168_ng.hex b/test/ardmake/hardware/bootloaders/atmega/ATmegaBOOT_168_ng.hex new file mode 100644 index 0000000..387091e --- /dev/null +++ b/test/ardmake/hardware/bootloaders/atmega/ATmegaBOOT_168_ng.hex @@ -0,0 +1,110 @@ +:103800000C94341C0C94511C0C94511C0C94511CA1 +:103810000C94511C0C94511C0C94511C0C94511C74 +:103820000C94511C0C94511C0C94511C0C94511C64 +:103830000C94511C0C94511C0C94511C0C94511C54 +:103840000C94511C0C94511C0C94511C0C94511C44 +:103850000C94511C0C94511C0C94511C0C94511C34 +:103860000C94511C0C94511C11241FBECFEFD4E0BA +:10387000DEBFCDBF11E0A0E0B1E0E4EAFEE302C0AC +:1038800005900D92A230B107D9F712E0A2E0B1E0A5 +:1038900001C01D92AD30B107E1F70E94ED1C0C9400 +:1038A000511F0C94001C482F10920A0280E08417CC +:1038B000E0F4582F2D9A28EE33E080E991E001974B +:1038C000F1F721503040C9F72D9828EE33E080E918 +:1038D00091E00197F1F721503040C9F7852F8F5FB4 +:1038E000582F841738F380930A020895EF92FF92BD +:1038F0000F931F93EE24FF2487018091C00087FD62 +:1039000017C00894E11CF11C011D111D81E0E8168F +:1039100082E1F8068AE7080780E0180770F3E09173 +:103920000201F091030109958091C00087FFE9CF62 +:103930008091C600992787FD90951F910F91FF9068 +:10394000EF900895982F8091C00085FFFCCF909351 +:10395000C60008950E94761C803271F080910401A7 +:103960008F5F80930401853009F00895E091020192 +:10397000F09103010995089584E10E94A21C80E161 +:103980000E94A21C0895CF93C82F0E94761C8032FB +:1039900041F0809104018F5F80930401853081F4B0 +:1039A0000AC084E10E94A21C8C2F0E94A21C80E10C +:1039B0000E94A21C05C0E0910201F091030109954B +:1039C000CF910895CF93C82FC150CF3F21F00E94CF +:1039D000761CC150E0F7CF910895CFEFD4E0DEBF61 +:1039E000CDBF000083E38093C4001092C50088E13E +:1039F0008093C10086E08093C2005098589A259A1F +:103A000083E00E94531C0E94761C8033B1F1813305 +:103A1000B9F1803409F455C0813409F45BC08234B3 +:103A200009F46DC0853409F470C0803531F18235F8 +:103A300021F1813511F1853509F46BC0863509F422 +:103A400073C0843609F47AC0843709F4CEC0853750 +:103A500009F429C1863709F44AC0809104018F5FB7 +:103A600080930401853079F6E0910201F091030121 +:103A700009950E94761C803351F60E94AA1CC3CF80 +:103A80000E94761CC82F803241F784E10E94A21C5C +:103A900081E40E94A21C86E50E94A21C82E50E948D +:103AA000A21C8C2F0E94A21C89E40E94A21C83E508 +:103AB0000E94A21C80E50E94A21C80E10E94A21C20 +:103AC000A2CF0E94761C8638C0F20E94761C0E940B +:103AD000AA1C99CF0E94761C803809F486C18138CF +:103AE00009F487C1823809F488C1883921F080E05F +:103AF0000E94C31C88CF83E00E94C31C84CF84E152 +:103B00000E94E21C0E94AA1C7ECF85E00E94E21C5B +:103B1000F9CF0E94761C809306010E94761C809348 +:103B200007010E94AA1C6FCF0E94761C803309F403 +:103B3000CAC083E00E94E21C80E0DACF0E94761CBB +:103B4000809309020E94761C8093080280910C02E7 +:103B50008E7F80930C020E94761C853409F4C4C0C9 +:103B600000E010E0809108029091090218161906F1 +:103B700070F4C8E0D1E00E94761C89930F5F1F4F5C +:103B8000809108029091090208171907A0F30E947A +:103B9000761C803209F061CF80910C0280FFAEC0AC +:103BA000E0910601F0910701EE0FFF1F00E010E029 +:103BB00020910802309109021216130680F4A8E041 +:103BC000B1E0F999FECFF2BDE1BD8D9180BDFA9AC9 +:103BD000F99A31960F5F1F4F0217130790F3F09376 +:103BE0000701E093060184E166CF0E94761C809372 +:103BF00009020E94761C8093080280910601909130 +:103C00000701880F991F90930701809306010E9476 +:103C1000761C853409F46EC080910C028E7F8093EF +:103C20000C020E94761C803209F0EDCE84E10E94E5 +:103C3000A21C00E010E02091080230910902121647 +:103C4000130608F03ACFE0910601F0910701809148 +:103C50000C0280FF1FC0F999FECFF2BDE1BDF89ABA +:103C600080B50E94A21CE0910601F09107013196F7 +:103C7000F0930701E09306012091080230910902B8 +:103C80000F5F1F4F0217130708F017CF80910C0228 +:103C900080FDE1CF869580FFB4C03196F093070197 +:103CA000E0930601EDCF0E94761C803209F0D5CE5C +:103CB00084E10E94A21C8EE10E94A21C84E90E9461 +:103CC000A21C86E0F8CE0E94761C0E94761CC82FAB +:103CD0000E94761CCC2309F47CC0C13009F47DC05D +:103CE00086E00E94C31C8FCE80910C02816080937D +:103CF0000C0236CF80910C02816091CF8091070138 +:103D000087FD6FC010920B02809106019091070110 +:103D1000880F991F909307018093060180910802F4 +:103D200080FF09C08091080290910902019690934A +:103D3000090280930802F894F999FECF1127E091C7 +:103D40000601F0910701C8E0D1E08091080290914E +:103D50000902103091F40091570001700130D9F33D +:103D600003E000935700E89500915700017001307F +:103D7000D9F301E100935700E8950990199000915B +:103D8000570001700130D9F301E000935700E89526 +:103D90001395103498F011270091570001700130ED +:103DA000D9F305E000935700E895009157000170A2 +:103DB0000130D9F301E100935700E895329602975C +:103DC00009F0C7CF103011F00296E5CF112484E13D +:103DD00072CE8EE10E94C31C16CE84E90E94C31CE1 +:103DE00012CE81E080930B028FCF82E00E94C31C31 +:103DF0000ACE81E00E94C31C06CE80E10E94C31C53 +:103E000002CE84910E94A21C2091080230910902E6 +:103E1000E0910601F091070140CFCF930E94761CFC +:103E2000C82F0E94A21CC13614F0C75503C0C0336E +:103E30000CF0C0538C2F992787FD9095CF91089552 +:103E40000F931F930E940D1F082F112707FD109538 +:103E500002951295107F1027007F10270E940D1FDA +:103E6000800F992787FD90951F910F910895CF930B +:103E7000C82F85958595859585958A3034F0895A22 +:103E8000CF70CA3034F0C95A05C0805DCF70CA30D7 +:103E9000D4F7C05D0E94A21C8C2F0E94A21CCF915F +:043EA0000895FFCFB3 +:023EA40080009C +:0400000300003800C1 +:00000001FF diff --git a/test/ardmake/hardware/bootloaders/atmega/ATmegaBOOT_168_pro_8MHz.hex b/test/ardmake/hardware/bootloaders/atmega/ATmegaBOOT_168_pro_8MHz.hex new file mode 100644 index 0000000..994e478 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/atmega/ATmegaBOOT_168_pro_8MHz.hex @@ -0,0 +1,126 @@ +:103800000C94341C0C94511C0C94511C0C94511CA1 +:103810000C94511C0C94511C0C94511C0C94511C74 +:103820000C94511C0C94511C0C94511C0C94511C64 +:103830000C94511C0C94511C0C94511C0C94511C54 +:103840000C94511C0C94511C0C94511C0C94511C44 +:103850000C94511C0C94511C0C94511C0C94511C34 +:103860000C94511C0C94511C11241FBECFEFD4E0BA +:10387000DEBFCDBF11E0A0E0B1E0EEEAFFE302C0A1 +:1038800005900D92A230B107D9F712E0A2E0B1E0A5 +:1038900001C01D92AD30B107E1F70E94331D0C94B9 +:1038A000D51F0C94001C982F9595959595959595F9 +:1038B000905D8F708A307CF0282F295A8091C0004B +:1038C00085FFFCCF9093C6008091C00085FFFCCFA0 +:1038D0002093C6000895282F205DF0CF982F809167 +:1038E000C00085FFFCCF9093C6000895EF92FF9231 +:1038F0000F931F93EE24FF2487018091C00087FD62 +:1039000017C00894E11CF11C011D111D81E2E8168D +:1039100081EAF80687E0080780E0180770F3E09175 +:103920000401F091050109958091C00087FFE9CF5E +:103930008091C6001F910F91FF90EF9008950E9413 +:10394000761C982F8091C00085FFFCCF9093C60015 +:1039500091362CF490330CF09053892F089597559D +:10396000892F08951F930E949F1C182F0E949F1C4F +:103970001295107F810F1F9108951F93182F882390 +:1039800021F00E94761C1150E1F71F9108951F93BA +:10399000182F0E94761C803249F0809103018F5FBE +:1039A000809303018530C1F01F9108958091C0007C +:1039B00085FFFCCF84E18093C6008091C00085FF25 +:1039C000FCCF1093C6008091C00085FFFCCF80E142 +:1039D0008093C6001F910895E0910401F0910501C4 +:1039E00009951F9108950E94761C803241F08091C4 +:1039F00003018F5F80930301853081F008958091EA +:103A0000C00085FFFCCF84E18093C6008091C00098 +:103A100085FFFCCF80E18093C6000895E09104010A +:103A2000F09105010995089510920A028823D1F0BA +:103A300090E048EC50E02D9A28EE33E0FA013197FF +:103A4000F1F721503040D1F72D9828EE33E0FA01FC +:103A50003197F1F721503040D1F79F5F981758F315 +:103A600080930A0208953F924F925F926F927F92E5 +:103A70008F929F92AF92BF92CF92DF92EF92FF927E +:103A80000F931F93CF93DF9394B714BE8091600080 +:103A90008861809360001092600091FF0CC289E100 +:103AA0008093C4001092C50088E18093C10086E035 +:103AB0008093C2005098589A259A81E00E94141D64 +:103AC00044E1F42E3EE1E32E24E9D22E96E0C92E05 +:103AD00080E1B82EAA24A39401E4902E16E5812E4D +:103AE000B2E57B2EA0E26A2EF9E45F2EE3E54E2ECE +:103AF00070E5372E0E94761C8033B9F18133C1F115 +:103B0000803409F470C0813409F477C0823409F438 +:103B100086C0853409F489C0803539F1823529F1B0 +:103B2000813509F4AFC1853509F485C0863509F4BE +:103B30008DC0843609F435C1843709F4C1C0853796 +:103B400009F490C0863709F466C0809103018F5F45 +:103B500080930301853071F6E0910401F091050135 +:103B600009950E94761C803349F60E94F31CC2CF4F +:103B70000E94761C803249F78091C00085FFFCCFFF +:103B8000F092C6008091C00085FFFCCF9092C600E5 +:103B90008091C00085FFFCCF8092C6008091C0005C +:103BA00085FFFCCF7092C6008091C00085FFFCCFDE +:103BB0006092C6008091C00085FFFCCF5092C60085 +:103BC0008091C00085FFFCCF4092C6008091C0006C +:103BD00085FFFCCF3092C6008091C00085FFFCCFEE +:103BE000B092C60087CF0E94761C863808F4BDCFFD +:103BF0000E94761C0E94F31C7DCF0E94761C8038A8 +:103C000009F45AC0813809F453C0823809F440C11C +:103C1000883909F449C080E00E94C71C6BCF84E159 +:103C20000E94BD1C0E94F31C65CF85E00E94BD1C54 +:103C30000E94F31C5FCF0E94761C809306010E94B5 +:103C4000761C809307010E94F31C54CF0E94761CBF +:103C5000803309F421C183E00E94BD1C80E00E94F2 +:103C6000C71C48CF0E94761C803209F06ECF80912D +:103C7000C00085FFFCCFF092C6008091C00085FF98 +:103C8000FCCFE092C6008091C00085FFFCCFD092AF +:103C9000C6008091C00085FFFCCFC092C600809115 +:103CA000C00085FFFCCF9CCF83E00E94C71C22CFC1 +:103CB00081E00E94C71C1ECF82E00E94C71C1ACF61 +:103CC0000E94761C809309020E94761C8093080251 +:103CD0008091060190910701880F991F9093070129 +:103CE000809306010E94761C853409F4C5C080913A +:103CF0000C028E7F80930C020E94761C803209F0A9 +:103D0000F9CE8091C00085FFFCCFF092C600609193 +:103D10000802709109026115710591F140E050E0CF +:103D200080910C02A82FA170B82FB27010C0BB23D5 +:103D300061F1E0910601F09107013196F0930701DE +:103D4000E09306014F5F5F4F46175707C8F4AA2359 +:103D500071F3F999FECF209106013091070132BD30 +:103D600021BDF89A90B58091C00085FFFCCF90935B +:103D7000C6002F5F3F4F3093070120930601E2CF2B +:103D80008091C00085FFFCCF2BCFE0910601F09120 +:103D9000070194918091C00085FFFCCF9093C600ED +:103DA000CCCF0E94761C809309020E94761C8093DF +:103DB000080280910C028E7F80930C020E94761C78 +:103DC000853429F480910C02816080930C028091EB +:103DD000080290910902892B89F000E010E00E940E +:103DE000761CF801E85FFE4F80830F5F1F4F8091C4 +:103DF0000802909109020817190788F30E94761C9F +:103E0000803209F0A2CE80910C0280FF62C0409106 +:103E1000060150910701440F551F5093070140932D +:103E20000601609108027091090261157105C9F0DF +:103E3000E8E0F1E09A01DB01AE0FBF1FF999FECF78 +:103E400032BD21BD819180BDFA9AF99A2F5F3F4F13 +:103E5000EA17FB0799F7460F571F50930701409346 +:103E600006018091C00085FFFCCFF092C6008091D2 +:103E7000C00085FFFCCFB4CE80910C02816080939E +:103E80000C023ACF0E94F31C88E080936000FFCFC1 +:103E900080E10E94C71C2ECE0E94761C0E94761CD8 +:103EA000182F0E94761C112381F0113051F086E00A +:103EB0000E94C71C1FCEE0910401F09105010995F5 +:103EC000EECD84E90E94C71C15CE8EE10E94C71C6E +:103ED00011CE809107018823880F880B8A21809357 +:103EE0000B028091060190910701880F991F909312 +:103EF0000701809306018091080280FF09C080912C +:103F00000802909109020196909309028093080299 +:103F1000F894F999FECF1127E0910601F09107017D +:103F2000C8E0D1E08091080290910902103091F42C +:103F30000091570001700130D9F303E0009357005E +:103F4000E8950091570001700130D9F301E1009329 +:103F50005700E895099019900091570001700130C1 +:103F6000D9F301E000935700E8951395103498F0C9 +:103F700011270091570001700130D9F305E000933B +:103F80005700E8950091570001700130D9F301E125 +:103F900000935700E8953296029709F0C7CF10308A +:0E3FA00011F00296E5CF11245CCFF894FFCF0C +:023FAE00800091 +:0400000300003800C1 +:00000001FF diff --git a/test/ardmake/hardware/bootloaders/atmega/Makefile b/test/ardmake/hardware/bootloaders/atmega/Makefile new file mode 100644 index 0000000..0fd54db --- /dev/null +++ b/test/ardmake/hardware/bootloaders/atmega/Makefile @@ -0,0 +1,224 @@ +# Makefile for ATmegaBOOT +# E.Lins, 18.7.2005 +# $Id$ +# +# Instructions +# +# To make bootloader .hex file: +# make diecimila +# make lilypad +# make ng +# etc... +# +# To burn bootloader .hex file: +# make diecimila_isp +# make lilypad_isp +# make ng_isp +# etc... + +# program name should not be changed... +PROGRAM = ATmegaBOOT_168 + +# enter the parameters for the avrdude isp tool +ISPTOOL = stk500v2 +ISPPORT = usb +ISPSPEED = -b 115200 + +MCU_TARGET = atmega168 +LDSECTION = --section-start=.text=0x3800 + +# the efuse should really be 0xf8; since, however, only the lower +# three bits of that byte are used on the atmega168, avrdude gets +# confused if you specify 1's for the higher bits, see: +# http://tinker.it/now/2007/02/24/the-tale-of-avrdude-atmega168-and-extended-bits-fuses/ +# +# similarly, the lock bits should be 0xff instead of 0x3f (to +# unlock the bootloader section) and 0xcf instead of 0x0f (to +# lock it), but since the high two bits of the lock byte are +# unused, avrdude would get confused. + +ISPFUSES = avrdude -c $(ISPTOOL) -p $(MCU_TARGET) -P $(ISPPORT) $(ISPSPEED) \ +-e -u -U lock:w:0x3f:m -U efuse:w:0x$(EFUSE):m -U hfuse:w:0x$(HFUSE):m -U lfuse:w:0x$(LFUSE):m +ISPFLASH = avrdude -c $(ISPTOOL) -p $(MCU_TARGET) -P $(ISPPORT) $(ISPSPEED) \ +-U flash:w:$(PROGRAM)_$(TARGET).hex -U lock:w:0x0f:m + +STK500 = "C:\Program Files\Atmel\AVR Tools\STK500\Stk500.exe" +STK500-1 = $(STK500) -e -d$(MCU_TARGET) -pf -vf -if$(PROGRAM)_$(TARGET).hex \ +-lFF -LFF -f$(HFUSE)$(LFUSE) -EF8 -ms -q -cUSB -I200kHz -s -wt +STK500-2 = $(STK500) -d$(MCU_TARGET) -ms -q -lCF -LCF -cUSB -I200kHz -s -wt + + +OBJ = $(PROGRAM).o +OPTIMIZE = -O2 + +DEFS = +LIBS = + +CC = avr-gcc + +# Override is only needed by avr-lib build system. + +override CFLAGS = -g -Wall $(OPTIMIZE) -mmcu=$(MCU_TARGET) -DF_CPU=$(AVR_FREQ) $(DEFS) +override LDFLAGS = -Wl,$(LDSECTION) +#override LDFLAGS = -Wl,-Map,$(PROGRAM).map,$(LDSECTION) + +OBJCOPY = avr-objcopy +OBJDUMP = avr-objdump + +all: + +lilypad: TARGET = lilypad +lilypad: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>1' '-DNUM_LED_FLASHES=3' +lilypad: AVR_FREQ = 8000000L +lilypad: $(PROGRAM)_lilypad.hex + +lilypad_isp: lilypad +lilypad_isp: TARGET = lilypad +lilypad_isp: HFUSE = DD +lilypad_isp: LFUSE = E2 +lilypad_isp: EFUSE = 00 +lilypad_isp: isp + +lilypad_resonator: TARGET = lilypad_resonator +lilypad_resonator: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=3' +lilypad_resonator: AVR_FREQ = 8000000L +lilypad_resonator: $(PROGRAM)_lilypad_resonator.hex + +lilypad_resonator_isp: lilypad_resonator +lilypad_resonator_isp: TARGET = lilypad_resonator +lilypad_resonator_isp: HFUSE = DD +lilypad_resonator_isp: LFUSE = C6 +lilypad_resonator_isp: EFUSE = 00 +lilypad_resonator_isp: isp + +pro8: TARGET = pro_8MHz +pro8: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' '-DWATCHDOG_MODS' +pro8: AVR_FREQ = 8000000L +pro8: $(PROGRAM)_pro_8MHz.hex + +pro8_isp: pro8 +pro8_isp: TARGET = pro_8MHz +pro8_isp: HFUSE = DD +pro8_isp: LFUSE = C6 +pro8_isp: EFUSE = 00 +pro8_isp: isp + +pro16: TARGET = pro_16MHz +pro16: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' '-DWATCHDOG_MODS' +pro16: AVR_FREQ = 16000000L +pro16: $(PROGRAM)_pro_16MHz.hex + +pro16_isp: pro16 +pro16_isp: TARGET = pro_16MHz +pro16_isp: HFUSE = DD +pro16_isp: LFUSE = C6 +pro16_isp: EFUSE = 00 +pro16_isp: isp + +pro20: TARGET = pro_20mhz +pro20: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' '-DWATCHDOG_MODS' +pro20: AVR_FREQ = 20000000L +pro20: $(PROGRAM)_pro_20mhz.hex + +pro20_isp: pro20 +pro20_isp: TARGET = pro_20mhz +pro20_isp: HFUSE = DD +pro20_isp: LFUSE = C6 +pro20_isp: EFUSE = 00 +pro20_isp: isp + +diecimila: TARGET = diecimila +diecimila: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' +diecimila: AVR_FREQ = 16000000L +diecimila: $(PROGRAM)_diecimila.hex + +diecimila_isp: diecimila +diecimila_isp: TARGET = diecimila +diecimila_isp: HFUSE = DD +diecimila_isp: LFUSE = FF +diecimila_isp: EFUSE = 00 +diecimila_isp: isp + +ng: TARGET = ng +ng: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>1' '-DNUM_LED_FLASHES=3' +ng: AVR_FREQ = 16000000L +ng: $(PROGRAM)_ng.hex + +ng_isp: ng +ng_isp: TARGET = ng +ng_isp: HFUSE = DD +ng_isp: LFUSE = FF +ng_isp: EFUSE = 00 +ng_isp: isp + +atmega328: TARGET = atmega328 +atmega328: MCU_TARGET = atmega328p +atmega328: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' -DBAUD_RATE=57600 +atmega328: AVR_FREQ = 16000000L +atmega328: LDSECTION = --section-start=.text=0x7800 +atmega328: $(PROGRAM)_atmega328.hex + +atmega328_isp: atmega328 +atmega328_isp: TARGET = atmega328 +atmega328_isp: MCU_TARGET = atmega328p +atmega328_isp: HFUSE = DA +atmega328_isp: LFUSE = FF +atmega328_isp: EFUSE = 05 +atmega328_isp: isp + +atmega328_pro8: TARGET = atmega328_pro_8MHz +atmega328_pro8: MCU_TARGET = atmega328p +atmega328_pro8: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' -DBAUD_RATE=57600 -DDOUBLE_SPEED +atmega328_pro8: AVR_FREQ = 8000000L +atmega328_pro8: LDSECTION = --section-start=.text=0x7800 +atmega328_pro8: $(PROGRAM)_atmega328_pro_8MHz.hex + +atmega328_pro8_isp: atmega328_pro8 +atmega328_pro8_isp: TARGET = atmega328_pro_8MHz +atmega328_pro8_isp: MCU_TARGET = atmega328p +atmega328_pro8_isp: HFUSE = DA +atmega328_pro8_isp: LFUSE = FF +atmega328_pro8_isp: EFUSE = 05 +atmega328_pro8_isp: isp + +mega: TARGET = atmega1280 +mega: MCU_TARGET = atmega1280 +mega: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=0' -DBAUD_RATE=57600 +mega: AVR_FREQ = 16000000L +mega: LDSECTION = --section-start=.text=0x1F000 +mega: $(PROGRAM)_atmega1280.hex + +mega_isp: mega +mega_isp: TARGET = atmega1280 +mega_isp: MCU_TARGET = atmega1280 +mega_isp: HFUSE = DA +mega_isp: LFUSE = FF +mega_isp: EFUSE = F5 +mega_isp: isp + +isp: $(TARGET) + $(ISPFUSES) + $(ISPFLASH) + +isp-stk500: $(PROGRAM)_$(TARGET).hex + $(STK500-1) + $(STK500-2) + +%.elf: $(OBJ) + $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $^ $(LIBS) + +clean: + rm -rf *.o *.elf *.lst *.map *.sym *.lss *.eep *.srec *.bin *.hex + +%.lst: %.elf + $(OBJDUMP) -h -S $< > $@ + +%.hex: %.elf + $(OBJCOPY) -j .text -j .data -O ihex $< $@ + +%.srec: %.elf + $(OBJCOPY) -j .text -j .data -O srec $< $@ + +%.bin: %.elf + $(OBJCOPY) -j .text -j .data -O binary $< $@ + diff --git a/test/ardmake/hardware/bootloaders/atmega8/ATmegaBOOT.c b/test/ardmake/hardware/bootloaders/atmega8/ATmegaBOOT.c new file mode 100644 index 0000000..17977e6 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/atmega8/ATmegaBOOT.c @@ -0,0 +1,507 @@ +/**********************************************************/ +/* Serial Bootloader for Atmel mega8 AVR Controller */ +/* */ +/* ATmegaBOOT.c */ +/* */ +/* Copyright (c) 2003, Jason P. Kyle */ +/* */ +/* Hacked by DojoCorp - ZGZ - MMX - IVR */ +/* Hacked by David A. Mellis */ +/* */ +/* This program is free software; you can redistribute it */ +/* and/or modify it under the terms of the GNU General */ +/* Public License as published by the Free Software */ +/* Foundation; either version 2 of the License, or */ +/* (at your option) any later version. */ +/* */ +/* This program is distributed in the hope that it will */ +/* be useful, but WITHOUT ANY WARRANTY; without even the */ +/* implied warranty of MERCHANTABILITY or FITNESS FOR A */ +/* PARTICULAR PURPOSE. See the GNU General Public */ +/* License for more details. */ +/* */ +/* You should have received a copy of the GNU General */ +/* Public License along with this program; if not, write */ +/* to the Free Software Foundation, Inc., */ +/* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +/* */ +/* Licence can be viewed at */ +/* http://www.fsf.org/licenses/gpl.txt */ +/* */ +/* Target = Atmel AVR m8 */ +/**********************************************************/ + +#include +#include +#include +#include +#include +#include + +//#define F_CPU 16000000 + +/* We, Malmoitians, like slow interaction + * therefore the slow baud rate ;-) + */ +//#define BAUD_RATE 9600 + +/* 6.000.000 is more or less 8 seconds at the + * speed configured here + */ +//#define MAX_TIME_COUNT 6000000 +#define MAX_TIME_COUNT (F_CPU>>1) +///#define MAX_TIME_COUNT_MORATORY 1600000 + +/* SW_MAJOR and MINOR needs to be updated from time to time to avoid warning message from AVR Studio */ +#define HW_VER 0x02 +#define SW_MAJOR 0x01 +#define SW_MINOR 0x12 + +// AVR-GCC compiler compatibility +// avr-gcc compiler v3.1.x and older doesn't support outb() and inb() +// if necessary, convert outb and inb to outp and inp +#ifndef outb + #define outb(sfr,val) (_SFR_BYTE(sfr) = (val)) +#endif +#ifndef inb + #define inb(sfr) _SFR_BYTE(sfr) +#endif + +/* defines for future compatibility */ +#ifndef cbi + #define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit)) +#endif +#ifndef sbi + #define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit)) +#endif + +/* Adjust to suit whatever pin your hardware uses to enter the bootloader */ +#define eeprom_rb(addr) eeprom_read_byte ((uint8_t *)(addr)) +#define eeprom_rw(addr) eeprom_read_word ((uint16_t *)(addr)) +#define eeprom_wb(addr, val) eeprom_write_byte ((uint8_t *)(addr), (uint8_t)(val)) + +/* Onboard LED is connected to pin PB5 */ +#define LED_DDR DDRB +#define LED_PORT PORTB +#define LED_PIN PINB +#define LED PINB5 + + +#define SIG1 0x1E // Yep, Atmel is the only manufacturer of AVR micros. Single source :( +#define SIG2 0x93 +#define SIG3 0x07 +#define PAGE_SIZE 0x20U //32 words + + +void putch(char); +char getch(void); +void getNch(uint8_t); +void byte_response(uint8_t); +void nothing_response(void); + +union address_union { + uint16_t word; + uint8_t byte[2]; +} address; + +union length_union { + uint16_t word; + uint8_t byte[2]; +} length; + +struct flags_struct { + unsigned eeprom : 1; + unsigned rampz : 1; +} flags; + +uint8_t buff[256]; +//uint8_t address_high; + +uint8_t pagesz=0x80; + +uint8_t i; +//uint8_t bootuart0=0,bootuart1=0; + + +void (*app_start)(void) = 0x0000; + +int main(void) +{ + uint8_t ch,ch2; + uint16_t w; + + //cbi(BL_DDR,BL); + //sbi(BL_PORT,BL); + + asm volatile("nop\n\t"); + + /* check if flash is programmed already, if not start bootloader anyway */ + //if(pgm_read_byte_near(0x0000) != 0xFF) { + + /* check if bootloader pin is set low */ + //if(bit_is_set(BL_PIN,BL)) app_start(); + //} + + /* initialize UART(s) depending on CPU defined */ + /* m8 */ + UBRRH = (((F_CPU/BAUD_RATE)/16)-1)>>8; // set baud rate + UBRRL = (((F_CPU/BAUD_RATE)/16)-1); + UCSRB = (1<> 8; + //UCSRA = 0x00; + //UCSRC = 0x86; + //UCSRB = _BV(TXEN)|_BV(RXEN); + + + /* this was giving uisp problems, so I removed it; without it, the boot + works on with uisp and avrdude on the mac (at least). */ + //putch('\0'); + + //uint32_t l; + //uint32_t time_count; + //time_count=0; + + /* set LED pin as output */ + sbi(LED_DDR,LED); + for (i = 0; i < 16; i++) { + outb(LED_PORT, inb(LED_PORT) ^ _BV(LED)); + _delay_loop_2(0); + } + + //for (l=0; l<40000000; l++) + //outb(LED_PORT, inb(LED_PORT) ^= _BV(LED)); + + /* flash onboard LED three times to signal entering of bootloader */ + //for(i=0; i<3; ++i) { + //for(l=0; l<40000000; ++l); + //sbi(LED_PORT,LED); + //for(l=0; l<40000000; ++l); + //cbi(LED_PORT,LED); + //} + + /* see comment at previous call to putch() */ + //putch('\0'); // this line is needed for the synchronization of the programmer + + /* forever */ + for (;;) { + //if((inb(UCSRA) & _BV(RXC))){ + /* get character from UART */ + ch = getch(); + + /* A bunch of if...else if... gives smaller code than switch...case ! */ + + /* Hello is anyone home ? */ + if(ch=='0') { + nothing_response(); + } + + /* Request programmer ID */ + /* Not using PROGMEM string due to boot block in m128 being beyond 64kB boundry */ + /* Would need to selectively manipulate RAMPZ, and it's only 9 characters anyway so who cares. */ + else if(ch=='1') { + if (getch() == ' ') { + putch(0x14); + putch('A'); + putch('V'); + putch('R'); + putch(' '); + putch('I'); + putch('S'); + putch('P'); + putch(0x10); + } + } + + /* AVR ISP/STK500 board commands DON'T CARE so default nothing_response */ + else if(ch=='@') { + ch2 = getch(); + if (ch2>0x85) getch(); + nothing_response(); + } + + /* AVR ISP/STK500 board requests */ + else if(ch=='A') { + ch2 = getch(); + if(ch2==0x80) byte_response(HW_VER); // Hardware version + else if(ch2==0x81) byte_response(SW_MAJOR); // Software major version + else if(ch2==0x82) byte_response(SW_MINOR); // Software minor version + //else if(ch2==0x98) byte_response(0x03); // Unknown but seems to be required by avr studio 3.56 + else byte_response(0x00); // Covers various unnecessary responses we don't care about + } + + /* Device Parameters DON'T CARE, DEVICE IS FIXED */ + else if(ch=='B') { + getNch(20); + nothing_response(); + } + + /* Parallel programming stuff DON'T CARE */ + else if(ch=='E') { + getNch(5); + nothing_response(); + } + + /* Enter programming mode */ + else if(ch=='P') { + nothing_response(); + // FIXME: modified only here by DojoCorp, Mumbai, India, 20050626 + //time_count=0; // exted the delay once entered prog.mode + } + + /* Leave programming mode */ + else if(ch=='Q') { + nothing_response(); + //time_count=MAX_TIME_COUNT_MORATORY; // once the programming is done, + // we should start the application + // but uisp has problems with this, + // therefore we just change the times + // and give the programmer 1 sec to react + } + + /* Erase device, don't care as we will erase one page at a time anyway. */ + else if(ch=='R') { + nothing_response(); + } + + /* Set address, little endian. EEPROM in bytes, FLASH in words */ + /* Perhaps extra address bytes may be added in future to support > 128kB FLASH. */ + /* This might explain why little endian was used here, big endian used everywhere else. */ + else if(ch=='U') { + address.byte[0] = getch(); + address.byte[1] = getch(); + nothing_response(); + } + + /* Universal SPI programming command, disabled. Would be used for fuses and lock bits. */ + else if(ch=='V') { + getNch(4); + byte_response(0x00); + } + + /* Write memory, length is big endian and is in bytes */ + else if(ch=='d') { + length.byte[1] = getch(); + length.byte[0] = getch(); + flags.eeprom = 0; + if (getch() == 'E') flags.eeprom = 1; + for (w=0;w127) address_high = 0x01; //Only possible with m128, m256 will need 3rd address byte. FIXME + //else address_high = 0x00; + + //address.word = address.word << 1; //address * 2 -> byte location + //if ((length.byte[0] & 0x01)) length.word++; //Even up an odd number of bytes + cli(); //Disable interrupts, just to be sure + while(bit_is_set(EECR,EEWE)); //Wait for previous EEPROM writes to complete + asm volatile( + "clr r17 \n\t" //page_word_count + "lds r30,address \n\t" //Address of FLASH location (in words) + "lds r31,address+1 \n\t" + "lsl r30 \n\t" //address * 2 -> byte location + "rol r31 \n\t" + "ldi r28,lo8(buff) \n\t" //Start of buffer array in RAM + "ldi r29,hi8(buff) \n\t" + "lds r24,length \n\t" //Length of data to be written (in bytes) + "lds r25,length+1 \n\t" + "sbrs r24,0 \n\t" //Even up an odd number of bytes + "rjmp length_loop \n\t" + "adiw r24,1 \n\t" + "length_loop: \n\t" //Main loop, repeat for number of words in block + "cpi r17,0x00 \n\t" //If page_word_count=0 then erase page + "brne no_page_erase \n\t" + "rcall wait_spm \n\t" +// "wait_spm1: \n\t" +// "lds r16,%0 \n\t" //Wait for previous spm to complete +// "andi r16,1 \n\t" +// "cpi r16,1 \n\t" +// "breq wait_spm1 \n\t" + "ldi r16,0x03 \n\t" //Erase page pointed to by Z + "sts %0,r16 \n\t" + "spm \n\t" + "rcall wait_spm \n\t" +// "wait_spm2: \n\t" +// "lds r16,%0 \n\t" //Wait for previous spm to complete +// "andi r16,1 \n\t" +// "cpi r16,1 \n\t" +// "breq wait_spm2 \n\t" + "ldi r16,0x11 \n\t" //Re-enable RWW section + "sts %0,r16 \n\t" + "spm \n\t" + "no_page_erase: \n\t" + "ld r0,Y+ \n\t" //Write 2 bytes into page buffer + "ld r1,Y+ \n\t" + + "rcall wait_spm \n\t" +// "wait_spm3: \n\t" +// "lds r16,%0 \n\t" //Wait for previous spm to complete +// "andi r16,1 \n\t" +// "cpi r16,1 \n\t" +// "breq wait_spm3 \n\t" + "ldi r16,0x01 \n\t" //Load r0,r1 into FLASH page buffer + "sts %0,r16 \n\t" + "spm \n\t" + + "inc r17 \n\t" //page_word_count++ + "cpi r17,%1 \n\t" + "brlo same_page \n\t" //Still same page in FLASH + "write_page: \n\t" + "clr r17 \n\t" //New page, write current one first + "rcall wait_spm \n\t" +// "wait_spm4: \n\t" +// "lds r16,%0 \n\t" //Wait for previous spm to complete +// "andi r16,1 \n\t" +// "cpi r16,1 \n\t" +// "breq wait_spm4 \n\t" + "ldi r16,0x05 \n\t" //Write page pointed to by Z + "sts %0,r16 \n\t" + "spm \n\t" + "rcall wait_spm \n\t" +// "wait_spm5: \n\t" +// "lds r16,%0 \n\t" //Wait for previous spm to complete +// "andi r16,1 \n\t" +// "cpi r16,1 \n\t" +// "breq wait_spm5 \n\t" + "ldi r16,0x11 \n\t" //Re-enable RWW section + "sts %0,r16 \n\t" + "spm \n\t" + "same_page: \n\t" + "adiw r30,2 \n\t" //Next word in FLASH + "sbiw r24,2 \n\t" //length-2 + "breq final_write \n\t" //Finished + "rjmp length_loop \n\t" + + "wait_spm: \n\t" + "lds r16,%0 \n\t" //Wait for previous spm to complete + "andi r16,1 \n\t" + "cpi r16,1 \n\t" + "breq wait_spm \n\t" + "ret \n\t" + + "final_write: \n\t" + "cpi r17,0 \n\t" + "breq block_done \n\t" + "adiw r24,2 \n\t" //length+2, fool above check on length after short page write + "rjmp write_page \n\t" + "block_done: \n\t" + "clr __zero_reg__ \n\t" //restore zero register + : "=m" (SPMCR) : "M" (PAGE_SIZE) : "r0","r16","r17","r24","r25","r28","r29","r30","r31"); + + /* Should really add a wait for RWW section to be enabled, don't actually need it since we never */ + /* exit the bootloader without a power cycle anyhow */ + } + putch(0x14); + putch(0x10); + } + } + + /* Read memory block mode, length is big endian. */ + else if(ch=='t') { + length.byte[1] = getch(); + length.byte[0] = getch(); + if (getch() == 'E') flags.eeprom = 1; + else { + flags.eeprom = 0; + address.word = address.word << 1; // address * 2 -> byte location + } + if (getch() == ' ') { // Command terminator + putch(0x14); + for (w=0;w < length.word;w++) { // Can handle odd and even lengths okay + if (flags.eeprom) { // Byte access EEPROM read + putch(eeprom_rb(address.word)); + address.word++; + } else { + if (!flags.rampz) putch(pgm_read_byte_near(address.word)); + address.word++; + } + } + putch(0x10); + } + } + + /* Get device signature bytes */ + else if(ch=='u') { + if (getch() == ' ') { + putch(0x14); + putch(SIG1); + putch(SIG2); + putch(SIG3); + putch(0x10); + } + } + + /* Read oscillator calibration byte */ + else if(ch=='v') { + byte_response(0x00); + } +// } else { +// time_count++; +// if (time_count>=MAX_TIME_COUNT) { +// app_start(); +// } +// } + } /* end of forever loop */ +} + +void putch(char ch) +{ + /* m8 */ + while (!(inb(UCSRA) & _BV(UDRE))); + outb(UDR,ch); +} + +char getch(void) +{ + /* m8 */ + uint32_t count = 0; + while(!(inb(UCSRA) & _BV(RXC))) { + /* HACKME:: here is a good place to count times*/ + count++; + if (count > MAX_TIME_COUNT) + app_start(); + } + return (inb(UDR)); +} + +void getNch(uint8_t count) +{ + uint8_t i; + for(i=0;i $@ + +size: $(PROGRAM).hex + $(SIZE) $^ + +# Rules for building the .text rom images + +text: hex bin srec + +hex: $(PROGRAM).hex +bin: $(PROGRAM).bin +srec: $(PROGRAM).srec + +%.hex: %.elf + $(OBJCOPY) -j .text -j .data -O ihex $< $@ + +%.srec: %.elf + $(OBJCOPY) -j .text -j .data -O srec $< $@ + +%.bin: %.elf + $(OBJCOPY) -j .text -j .data -O binary $< $@ diff --git a/test/ardmake/hardware/bootloaders/bt/ATmegaBOOT_168.c b/test/ardmake/hardware/bootloaders/bt/ATmegaBOOT_168.c new file mode 100644 index 0000000..c73eefa --- /dev/null +++ b/test/ardmake/hardware/bootloaders/bt/ATmegaBOOT_168.c @@ -0,0 +1,1038 @@ +/**********************************************************/ +/* Serial Bootloader for Atmel megaAVR Controllers */ +/* */ +/* tested with ATmega8, ATmega128 and ATmega168 */ +/* should work with other mega's, see code for details */ +/* */ +/* ATmegaBOOT.c */ +/* */ +/* build: 050815 */ +/* date : 15.08.2005 */ +/* */ +/* 20060802: hacked for Arduino by D. Cuartielles */ +/* based on a previous hack by D. Mellis */ +/* and D. Cuartielles */ +/* */ +/* Monitor and debug functions were added to the original */ +/* code by Dr. Erik Lins, chip45.com. (See below) */ +/* */ +/* Thanks to Karl Pitrich for fixing a bootloader pin */ +/* problem and more informative LED blinking! */ +/* */ +/* For the latest version see: */ +/* http://www.chip45.com/ */ +/* */ +/* ------------------------------------------------------ */ +/* */ +/* based on stk500boot.c */ +/* Copyright (c) 2003, Jason P. Kyle */ +/* All rights reserved. */ +/* see avr1.org for original file and information */ +/* */ +/* This program is free software; you can redistribute it */ +/* and/or modify it under the terms of the GNU General */ +/* Public License as published by the Free Software */ +/* Foundation; either version 2 of the License, or */ +/* (at your option) any later version. */ +/* */ +/* This program is distributed in the hope that it will */ +/* be useful, but WITHOUT ANY WARRANTY; without even the */ +/* implied warranty of MERCHANTABILITY or FITNESS FOR A */ +/* PARTICULAR PURPOSE. See the GNU General Public */ +/* License for more details. */ +/* */ +/* You should have received a copy of the GNU General */ +/* Public License along with this program; if not, write */ +/* to the Free Software Foundation, Inc., */ +/* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +/* */ +/* Licence can be viewed at */ +/* http://www.fsf.org/licenses/gpl.txt */ +/* */ +/* Target = Atmel AVR m128,m64,m32,m16,m8,m162,m163,m169, */ +/* m8515,m8535. ATmega161 has a very small boot block so */ +/* isn't supported. */ +/* */ +/* Tested with m128,m8,m163 - feel free to let me know */ +/* how/if it works for you. */ +/* */ +/**********************************************************/ + + +/* some includes */ +#include +#include +#include +#include +#include + + +#define set_output(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit)) +#define set_input(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit)) + + +#define high(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit)) +#define low(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit)) + + + + +/* the current avr-libc eeprom functions do not support the ATmega168 */ +/* own eeprom write/read functions are used instead */ +#if !defined(__AVR_ATmega168__) || !defined(__AVR_ATmega328P__) +#include +#endif + +/* define F_CPU according to AVR_FREQ set in Makefile */ +/* Is there a better way to pass such a parameter from Makefile to source code ? */ + +#define F_CPU 16000000L + +#include + + +/* 20060803: hacked by DojoCorp */ +/* set the waiting time for the bootloader */ +#define MAX_TIME_COUNT (F_CPU>>1) + +/* set the UART baud rate */ +/* 20060803: hacked by DojoCorp */ +#define BAUD_RATE 115200 + + +/* SW_MAJOR and MINOR needs to be updated from time to time to avoid warning message from AVR Studio */ +/* never allow AVR Studio to do an update !!!! */ +#define HW_VER 0x02 +#define SW_MAJOR 0x01 +#define SW_MINOR 0x0f + + +/* Adjust to suit whatever pin your hardware uses to enter the bootloader */ +/* ATmega128 has two UARTS so two pins are used to enter bootloader and select UART */ +/* BL0... means UART0, BL1... means UART1 */ +#ifdef __AVR_ATmega128__ +#define BL_DDR DDRF +#define BL_PORT PORTF +#define BL_PIN PINF +#define BL0 PINF7 +#define BL1 PINF6 +#else +/* other ATmegas have only one UART, so only one pin is defined to enter bootloader */ +#define BL_DDR DDRD +#define BL_PORT PORTD +#define BL_PIN PIND +#define BL PIND6 +#endif + + +/* onboard LED is used to indicate, that the bootloader was entered (3x flashing) */ +/* if monitor functions are included, LED goes on after monitor was entered */ +#ifdef __AVR_ATmega128__ +/* Onboard LED is connected to pin PB7 (e.g. Crumb128, PROBOmega128, Savvy128) */ +#define LED_DDR DDRB +#define LED_PORT PORTB +#define LED_PIN PINB +#define LED PINB7 +#else +/* Onboard LED is connected to pin PB2 (e.g. Crumb8, Crumb168) */ +#define LED_DDR DDRB +#define LED_PORT PORTB +#define LED_PIN PINB +/* 20060803: hacked by DojoCorp, LED pin is B5 in Arduino */ +/* #define LED PINB2 */ +#define LED PINB5 +#endif + + +/* monitor functions will only be compiled when using ATmega128, due to bootblock size constraints */ +#ifdef __AVR_ATmega128__ +#define MONITOR +#endif + + +/* define various device id's */ +/* manufacturer byte is always the same */ +#define SIG1 0x1E // Yep, Atmel is the only manufacturer of AVR micros. Single source :( + +#if defined __AVR_ATmega128__ +#define SIG2 0x97 +#define SIG3 0x02 +#define PAGE_SIZE 0x80U //128 words + +#elif defined __AVR_ATmega64__ +#define SIG2 0x96 +#define SIG3 0x02 +#define PAGE_SIZE 0x80U //128 words + +#elif defined __AVR_ATmega32__ +#define SIG2 0x95 +#define SIG3 0x02 +#define PAGE_SIZE 0x40U //64 words + +#elif defined __AVR_ATmega16__ +#define SIG2 0x94 +#define SIG3 0x03 +#define PAGE_SIZE 0x40U //64 words + +#elif defined __AVR_ATmega8__ +#define SIG2 0x93 +#define SIG3 0x07 +#define PAGE_SIZE 0x20U //32 words + +#elif defined __AVR_ATmega88__ +#define SIG2 0x93 +#define SIG3 0x0a +#define PAGE_SIZE 0x20U //32 words + +#elif defined __AVR_ATmega168__ +#define SIG2 0x94 +#define SIG3 0x06 +#define PAGE_SIZE 0x40U //64 words + +#elif defined __AVR_ATmega328P__ +#define SIG2 0x95 +#define SIG3 0x0F +#define PAGE_SIZE 0x40U //64 words + +#elif defined __AVR_ATmega162__ +#define SIG2 0x94 +#define SIG3 0x04 +#define PAGE_SIZE 0x40U //64 words + +#elif defined __AVR_ATmega163__ +#define SIG2 0x94 +#define SIG3 0x02 +#define PAGE_SIZE 0x40U //64 words + +#elif defined __AVR_ATmega169__ +#define SIG2 0x94 +#define SIG3 0x05 +#define PAGE_SIZE 0x40U //64 words + +#elif defined __AVR_ATmega8515__ +#define SIG2 0x93 +#define SIG3 0x06 +#define PAGE_SIZE 0x20U //32 words + +#elif defined __AVR_ATmega8535__ +#define SIG2 0x93 +#define SIG3 0x08 +#define PAGE_SIZE 0x20U //32 words +#endif + + +/* function prototypes */ +void putch(char); +char getch(void); +void getNch(uint8_t); +void byte_response(uint8_t); +void nothing_response(void); +char gethex(void); +void puthex(char); +void flash_led(uint8_t); + +/* some variables */ +union address_union { + uint16_t word; + uint8_t byte[2]; +} address; + +union length_union { + uint16_t word; + uint8_t byte[2]; +} length; + +struct flags_struct { + unsigned eeprom : 1; + unsigned rampz : 1; +} flags; + +uint8_t buff[256]; +uint8_t address_high; + +uint8_t pagesz=0x80; + +uint8_t i; +uint8_t bootuart = 0; + +void (*app_start)(void) = 0x0000; + + +/* main program starts here */ +int main(void) +{ + uint8_t ch,ch2; + uint16_t w; + + asm volatile("nop\n\t"); + + /* set pin direction for bootloader pin and enable pullup */ + /* for ATmega128, two pins need to be initialized */ +#ifdef __AVR_ATmega128__ + BL_DDR &= ~_BV(BL0); + BL_DDR &= ~_BV(BL1); + BL_PORT |= _BV(BL0); + BL_PORT |= _BV(BL1); +#else + BL_DDR &= ~_BV(BL); + BL_PORT |= _BV(BL); +#endif + + +#ifdef __AVR_ATmega128__ + /* check which UART should be used for booting */ + if(bit_is_clear(BL_PIN, BL0)) { + bootuart = 1; + } + else if(bit_is_clear(BL_PIN, BL1)) { + bootuart = 2; + } +#endif + + /* check if flash is programmed already, if not start bootloader anyway */ + if(pgm_read_byte_near(0x0000) != 0xFF) { + +#ifdef __AVR_ATmega128__ + /* no UART was selected, start application */ + if(!bootuart) { + app_start(); + } +#else + /* check if bootloader pin is set low */ + /* we don't start this part neither for the m8, nor m168 */ + //if(bit_is_set(BL_PIN, BL)) { + // app_start(); + // } +#endif + } + +#ifdef __AVR_ATmega128__ + /* no bootuart was selected, default to uart 0 */ + if(!bootuart) { + bootuart = 1; + } +#endif + + + /* initialize UART(s) depending on CPU defined */ +#ifdef __AVR_ATmega128__ + if(bootuart == 1) { + UBRR0L = (uint8_t)(F_CPU/(BAUD_RATE*16L)-1); + UBRR0H = (F_CPU/(BAUD_RATE*16L)-1) >> 8; + UCSR0A = 0x00; + UCSR0C = 0x06; + UCSR0B = _BV(TXEN0)|_BV(RXEN0); + } + if(bootuart == 2) { + UBRR1L = (uint8_t)(F_CPU/(BAUD_RATE*16L)-1); + UBRR1H = (F_CPU/(BAUD_RATE*16L)-1) >> 8; + UCSR1A = 0x00; + UCSR1C = 0x06; + UCSR1B = _BV(TXEN1)|_BV(RXEN1); + } +#elif defined __AVR_ATmega163__ + UBRR = (uint8_t)(F_CPU/(BAUD_RATE*16L)-1); + UBRRHI = (F_CPU/(BAUD_RATE*16L)-1) >> 8; + UCSRA = 0x00; + UCSRB = _BV(TXEN)|_BV(RXEN); +#elif defined(__AVR_ATmega168__) || defined(__AVR_ATmega328P__) + + UBRR0H = ((F_CPU / 16 + BAUD_RATE / 2) / BAUD_RATE - 1) >> 8; + UBRR0L = ((F_CPU / 16 + BAUD_RATE / 2) / BAUD_RATE - 1); + + + //UBRR0L = (uint8_t)(F_CPU/(BAUD_RATE*16L)-1); + //UBRR0H = (F_CPU/(BAUD_RATE*16L)-1) >> 8; + UCSR0B = (1<>8; // set baud rate + UBRRL = (((F_CPU/BAUD_RATE)/16)-1); + UCSRB = (1<> 8; + UCSRA = 0x00; + UCSRC = 0x06; + UCSRB = _BV(TXEN)|_BV(RXEN); +#endif + + /* set LED pin as output */ + LED_DDR |= _BV(LED); + + + + set_output(DDRD,PIND7); + high(PORTD,PD7); + for (i = 0; i < 16; i++) { + + _delay_loop_2(0); + } + + + low(PORTD,PD7); + + + /* flash onboard LED to signal entering of bootloader */ +#ifdef __AVR_ATmega128__ + // 4x for UART0, 5x for UART1 + flash_led(3 + bootuart); +#else + flash_led(3); +#endif + + /* 20050803: by DojoCorp, this is one of the parts provoking the + system to stop listening, cancelled from the original */ + //putch('\0'); + + + //message("SET BT PAGEMODE 3 2000 1"); +putch('S'); +putch('E'); +putch('T'); +putch(' '); +putch('B'); +putch('T'); +putch(' '); +putch('P'); +putch('A'); +putch('G'); +putch('E'); +putch('M'); +putch('O'); +putch('D'); +putch('E'); +putch(' '); +putch('3'); +putch(' '); +putch('2'); +putch('0'); +putch('0'); +putch('0'); +putch(' '); +putch('1'); +putch(0x0D); + + + //put_s("SET BT ROLE 0 f 7d00"); + putch('S'); + putch('E'); + putch('T'); + putch(' '); + putch('B'); + putch('T'); + putch(' '); + putch('R'); + putch('O'); + putch('L'); + putch('E'); + putch(' '); + putch('0'); + putch(' '); + putch('f'); + putch(' '); + putch('7'); + putch('d'); + putch('0'); + putch('0'); + putch(0x0D); + + + + + + + /* forever loop */ + for (;;) { + + /* get character from UART */ + ch = getch(); + + /* A bunch of if...else if... gives smaller code than switch...case ! */ + + /* Hello is anyone home ? */ + if(ch=='0') { + nothing_response(); + } + + + /* Request programmer ID */ + /* Not using PROGMEM string due to boot block in m128 being beyond 64kB boundry */ + /* Would need to selectively manipulate RAMPZ, and it's only 9 characters anyway so who cares. */ + else if(ch=='1') { + if (getch() == ' ') { + putch(0x14); + putch('A'); + putch('V'); + putch('R'); + putch(' '); + putch('I'); + putch('S'); + putch('P'); + putch(0x10); + } + } + + + /* AVR ISP/STK500 board commands DON'T CARE so default nothing_response */ + else if(ch=='@') { + ch2 = getch(); + if (ch2>0x85) getch(); + nothing_response(); + } + + + /* AVR ISP/STK500 board requests */ + else if(ch=='A') { + ch2 = getch(); + if(ch2==0x80) byte_response(HW_VER); // Hardware version + else if(ch2==0x81) byte_response(SW_MAJOR); // Software major version + else if(ch2==0x82) byte_response(SW_MINOR); // Software minor version + else if(ch2==0x98) byte_response(0x03); // Unknown but seems to be required by avr studio 3.56 + else byte_response(0x00); // Covers various unnecessary responses we don't care about + } + + + /* Device Parameters DON'T CARE, DEVICE IS FIXED */ + else if(ch=='B') { + getNch(20); + nothing_response(); + } + + + /* Parallel programming stuff DON'T CARE */ + else if(ch=='E') { + getNch(5); + nothing_response(); + } + + + /* Enter programming mode */ + else if(ch=='P') { + nothing_response(); + } + + + /* Leave programming mode */ + else if(ch=='Q') { + nothing_response(); + } + + + /* Erase device, don't care as we will erase one page at a time anyway. */ + else if(ch=='R') { + nothing_response(); + } + + + /* Set address, little endian. EEPROM in bytes, FLASH in words */ + /* Perhaps extra address bytes may be added in future to support > 128kB FLASH. */ + /* This might explain why little endian was used here, big endian used everywhere else. */ + else if(ch=='U') { + address.byte[0] = getch(); + address.byte[1] = getch(); + nothing_response(); + } + + + /* Universal SPI programming command, disabled. Would be used for fuses and lock bits. */ + else if(ch=='V') { + getNch(4); + byte_response(0x00); + } + + + /* Write memory, length is big endian and is in bytes */ + else if(ch=='d') { + length.byte[1] = getch(); + length.byte[0] = getch(); + flags.eeprom = 0; + if (getch() == 'E') flags.eeprom = 1; + for (w=0;w127) address_high = 0x01; //Only possible with m128, m256 will need 3rd address byte. FIXME + else address_high = 0x00; +#ifdef __AVR_ATmega128__ + RAMPZ = address_high; +#endif + address.word = address.word << 1; //address * 2 -> byte location + /* if ((length.byte[0] & 0x01) == 0x01) length.word++; //Even up an odd number of bytes */ + if ((length.byte[0] & 0x01)) length.word++; //Even up an odd number of bytes + cli(); //Disable interrupts, just to be sure + // HACKME: EEPE used to be EEWE + while(bit_is_set(EECR,EEPE)); //Wait for previous EEPROM writes to complete + asm volatile( + "clr r17 \n\t" //page_word_count + "lds r30,address \n\t" //Address of FLASH location (in bytes) + "lds r31,address+1 \n\t" + "ldi r28,lo8(buff) \n\t" //Start of buffer array in RAM + "ldi r29,hi8(buff) \n\t" + "lds r24,length \n\t" //Length of data to be written (in bytes) + "lds r25,length+1 \n\t" + "length_loop: \n\t" //Main loop, repeat for number of words in block + "cpi r17,0x00 \n\t" //If page_word_count=0 then erase page + "brne no_page_erase \n\t" + "wait_spm1: \n\t" + "lds r16,%0 \n\t" //Wait for previous spm to complete + "andi r16,1 \n\t" + "cpi r16,1 \n\t" + "breq wait_spm1 \n\t" + "ldi r16,0x03 \n\t" //Erase page pointed to by Z + "sts %0,r16 \n\t" + "spm \n\t" +#ifdef __AVR_ATmega163__ + ".word 0xFFFF \n\t" + "nop \n\t" +#endif + "wait_spm2: \n\t" + "lds r16,%0 \n\t" //Wait for previous spm to complete + "andi r16,1 \n\t" + "cpi r16,1 \n\t" + "breq wait_spm2 \n\t" + + "ldi r16,0x11 \n\t" //Re-enable RWW section + "sts %0,r16 \n\t" + "spm \n\t" +#ifdef __AVR_ATmega163__ + ".word 0xFFFF \n\t" + "nop \n\t" +#endif + "no_page_erase: \n\t" + "ld r0,Y+ \n\t" //Write 2 bytes into page buffer + "ld r1,Y+ \n\t" + + "wait_spm3: \n\t" + "lds r16,%0 \n\t" //Wait for previous spm to complete + "andi r16,1 \n\t" + "cpi r16,1 \n\t" + "breq wait_spm3 \n\t" + "ldi r16,0x01 \n\t" //Load r0,r1 into FLASH page buffer + "sts %0,r16 \n\t" + "spm \n\t" + + "inc r17 \n\t" //page_word_count++ + "cpi r17,%1 \n\t" + "brlo same_page \n\t" //Still same page in FLASH + "write_page: \n\t" + "clr r17 \n\t" //New page, write current one first + "wait_spm4: \n\t" + "lds r16,%0 \n\t" //Wait for previous spm to complete + "andi r16,1 \n\t" + "cpi r16,1 \n\t" + "breq wait_spm4 \n\t" +#ifdef __AVR_ATmega163__ + "andi r30,0x80 \n\t" // m163 requires Z6:Z1 to be zero during page write +#endif + "ldi r16,0x05 \n\t" //Write page pointed to by Z + "sts %0,r16 \n\t" + "spm \n\t" +#ifdef __AVR_ATmega163__ + ".word 0xFFFF \n\t" + "nop \n\t" + "ori r30,0x7E \n\t" // recover Z6:Z1 state after page write (had to be zero during write) +#endif + "wait_spm5: \n\t" + "lds r16,%0 \n\t" //Wait for previous spm to complete + "andi r16,1 \n\t" + "cpi r16,1 \n\t" + "breq wait_spm5 \n\t" + "ldi r16,0x11 \n\t" //Re-enable RWW section + "sts %0,r16 \n\t" + "spm \n\t" +#ifdef __AVR_ATmega163__ + ".word 0xFFFF \n\t" + "nop \n\t" +#endif + "same_page: \n\t" + "adiw r30,2 \n\t" //Next word in FLASH + "sbiw r24,2 \n\t" //length-2 + "breq final_write \n\t" //Finished + "rjmp length_loop \n\t" + "final_write: \n\t" + "cpi r17,0 \n\t" + "breq block_done \n\t" + "adiw r24,2 \n\t" //length+2, fool above check on length after short page write + "rjmp write_page \n\t" + "block_done: \n\t" + "clr __zero_reg__ \n\t" //restore zero register +#if defined __AVR_ATmega168__ || __AVR_ATmega328P__ + : "=m" (SPMCSR) : "M" (PAGE_SIZE) : "r0","r16","r17","r24","r25","r28","r29","r30","r31" +#else + : "=m" (SPMCR) : "M" (PAGE_SIZE) : "r0","r16","r17","r24","r25","r28","r29","r30","r31" +#endif + ); + /* Should really add a wait for RWW section to be enabled, don't actually need it since we never */ + /* exit the bootloader without a power cycle anyhow */ + } + putch(0x14); + putch(0x10); + } + } + + + /* Read memory block mode, length is big endian. */ + else if(ch=='t') { + length.byte[1] = getch(); + length.byte[0] = getch(); +#if defined __AVR_ATmega128__ + if (address.word>0x7FFF) flags.rampz = 1; // No go with m256, FIXME + else flags.rampz = 0; +#endif + if (getch() == 'E') flags.eeprom = 1; + else { + flags.eeprom = 0; + address.word = address.word << 1; // address * 2 -> byte location + } + if (getch() == ' ') { // Command terminator + putch(0x14); + for (w=0;w < length.word;w++) { // Can handle odd and even lengths okay + if (flags.eeprom) { // Byte access EEPROM read +#if defined __AVR_ATmega168__ || __AVR_ATmega328P__ + while(EECR & (1<= 'a') { + ah = ah - 'a' + 0x0a; + } else if(ah >= '0') { + ah -= '0'; + } + if(al >= 'a') { + al = al - 'a' + 0x0a; + } else if(al >= '0') { + al -= '0'; + } + return (ah << 4) + al; +} + + +void puthex(char ch) { + char ah,al; + + ah = (ch & 0xf0) >> 4; + if(ah >= 0x0a) { + ah = ah - 0x0a + 'a'; + } else { + ah += '0'; + } + al = (ch & 0x0f); + if(al >= 0x0a) { + al = al - 0x0a + 'a'; + } else { + al += '0'; + } + putch(ah); + putch(al); +} + + +void putch(char ch) +{ +#ifdef __AVR_ATmega128__ + if(bootuart == 1) { + while (!(UCSR0A & _BV(UDRE0))); + UDR0 = ch; + } + else if (bootuart == 2) { + while (!(UCSR1A & _BV(UDRE1))); + UDR1 = ch; + } +#elif defined (__AVR_ATmega168__) || defined(__AVR_ATmega328P__) + while (!(UCSR0A & _BV(UDRE0))); + UDR0 = ch; +#else + /* m8,16,32,169,8515,8535,163 */ + while (!(UCSRA & _BV(UDRE))); + UDR = ch; +#endif +} + + +char getch(void) +{ +#ifdef __AVR_ATmega128__ + if(bootuart == 1) { + while(!(UCSR0A & _BV(RXC0))); + return UDR0; + } + else if(bootuart == 2) { + while(!(UCSR1A & _BV(RXC1))); + return UDR1; + } + return 0; +#elif defined (__AVR_ATmega168__) || defined(__AVR_ATmega328P__) + uint32_t count = 0; + while(!(UCSR0A & _BV(RXC0))){ + /* 20060803 DojoCorp:: Addon coming from the previous Bootloader*/ + /* HACKME:: here is a good place to count times*/ + count++; + if (count > MAX_TIME_COUNT) + app_start(); + } + return UDR0; +#else + /* m8,16,32,169,8515,8535,163 */ + uint32_t count = 0; + while(!(UCSRA & _BV(RXC))){ + /* 20060803 DojoCorp:: Addon coming from the previous Bootloader*/ + /* HACKME:: here is a good place to count times*/ + count++; + if (count > MAX_TIME_COUNT) + app_start(); + } + return UDR; +#endif +} + + +void getNch(uint8_t count) +{ + uint8_t i; + for(i=0;i $@ + +%.hex: %.elf + $(OBJCOPY) -j .text -j .data -O ihex $< $@ + +%.srec: %.elf + $(OBJCOPY) -j .text -j .data -O srec $< $@ + +%.bin: %.elf + $(OBJCOPY) -j .text -j .data -O binary $< $@ + diff --git a/test/ardmake/hardware/bootloaders/lilypad/LilyPadBOOT_168.hex b/test/ardmake/hardware/bootloaders/lilypad/LilyPadBOOT_168.hex new file mode 100644 index 0000000..aea378e --- /dev/null +++ b/test/ardmake/hardware/bootloaders/lilypad/LilyPadBOOT_168.hex @@ -0,0 +1,117 @@ +:103800000C94341C0C944F1C0C944F1C0C944F1CA7 +:103810000C944F1C0C944F1C0C944F1C0C944F1C7C +:103820000C944F1C0C944F1C0C944F1C0C944F1C6C +:103830000C944F1C0C944F1C0C944F1C0C944F1C5C +:103840000C944F1C0C944F1C0C944F1C0C944F1C4C +:103850000C944F1C0C944F1C0C944F1C0C944F1C3C +:103860000C944F1C0C944F1C11241FBECFEFD4E0BE +:10387000DEBFCDBF11E0A0E0B1E0E8E1FFE302C0B0 +:1038800005900D92A230B107D9F712E0A2E0B1E0A5 +:1038900001C01D92AD30B107E1F70C94311D0C94BD +:1038A000001CCF93DF93CDB7DEB724970FB6F89403 +:1038B000DEBF0FBECDBF382F882309F433E010924E +:1038C0000A02332309F44BC020E02D9A19821A8290 +:1038D0001B821C8289819A81AB81BC8180549F416B +:1038E000A040B040A0F489819A81AB81BC8101964F +:1038F000A11DB11D89839A83AB83BC8389819A8181 +:10390000AB81BC8180549F41A040B04060F32D98B2 +:1039100019821A821B821C8289819A81AB81BC81A7 +:1039200080549F41A040B040A0F489819A81AB812E +:10393000BC810196A11DB11D89839A83AB83BC8391 +:1039400089819A81AB81BC8180549F41A040B04065 +:1039500060F32F5F231708F4B8CF20930A02249650 +:103960000FB6F894DEBF0FBECDBFDF91CF910895A3 +:10397000EF92FF920F931F93EE24FF248701809113 +:10398000C00087FD17C00894E11CF11C011D111D2A +:1039900081E0E81689E0F8068DE3080780E0180763 +:1039A00070F3E0910201F091030109958091C0004C +:1039B00087FFE9CF8091C600992787FD90951F91D9 +:1039C0000F91FF90EF900895982F8091C00085FF90 +:1039D000FCCF9093C60008950E94B81C803271F00D +:1039E000809104018F5F80930401853009F0089570 +:1039F000E0910201F09103010995089584E10E948C +:103A0000E41C80E10E94E41C08951F93182F0E947B +:103A1000B81C803269F0809104018F5F80930401AB +:103A2000853079F4E0910201F0910301099509C014 +:103A300084E10E94E41C812F0E94E41C80E10E942A +:103A4000E41C1F910895282F882351F090E0809165 +:103A5000C00087FFFCCF8091C6009F5F2917B9F790 +:103A60000895CFEFD4E0DEBFCDBF000089E18093A1 +:103A7000C4001092C50088E18093C10086E0809365 +:103A8000C2005098589A259A83E00E94511C0E94C7 +:103A9000B81C8033B1F18133B9F1803409F454C0DA +:103AA000813409F45AC0823409F469C0853409F4B8 +:103AB0006CC0803531F1813521F1823511F18535C8 +:103AC00009F4B2C0863509F4BAC0843609F463C07B +:103AD000843709F4BBC0853709F40EC1863709F471 +:103AE0004AC0809104018F5F80930401853079F68C +:103AF000E0910201F091030109950E94B81C803306 +:103B000051F60E94EC1CC3CF0E94B81C803249F7CA +:103B100084E10E94E41C81E40E94E41C86E50E948A +:103B2000E41C82E50E94E41C80E20E94E41C89E41B +:103B30000E94E41C83E50E94E41C80E50E94E41CD2 +:103B400080E10E94E41CA3CF0E94B81C8638C8F212 +:103B50000E94B81C0E94EC1C9ACF0E94B81C8038AE +:103B600009F4F7C0813809F4F8C0823809F4F9C0C3 +:103B7000883909F4BDC080E00E94051D88CF84E12A +:103B80000E94231D0E94EC1C82CF85E00E94231D11 +:103B90000E94EC1C7CCF0E94B81C809309020E94FA +:103BA000B81C8093080280910C028E7F80930C02D7 +:103BB0000E94B81C853409F4C6C080910802909117 +:103BC0000902892B09F0ADC00E94B81C803209F0AF +:103BD00088CF80910C0280FFC8C08091080290912C +:103BE00009020097D1F02091060130910701E8E029 +:103BF000F1E0AC014E0F5F1FF999FECF32BD21BD40 +:103C0000819180BDFA9AF99A2F5F3F4F4E175F0757 +:103C100099F7309307012093060184E10E94E41C88 +:103C200080E10E94E41C33CF0E94B81C80930601FF +:103C30000E94B81C809307010E94EC1C28CF84E0EE +:103C40000E94231D80E00E94051D21CF0E94B81C08 +:103C5000809309020E94B81C809308020E94B81C3D +:103C6000853409F4F4C080910C028E7F80930C029D +:103C70008091060190910701880F991F9093070189 +:103C8000809306010E94B81C803209F000CF84E1C5 +:103C90000E94E41C2091080230910902211531058F +:103CA00019F1C0E0D0E0E0910601F09107018091A8 +:103CB0000C0280FFC4C0F999FECFF2BDE1BDF89AB5 +:103CC00080B50E94E41CE0910601F0910701319655 +:103CD000F0930701E0930601209108023091090258 +:103CE0002196C217D30718F380E10E94E41CCFCEBF +:103CF00083E00E94051DCBCE0E94B81C803209F0E3 +:103D0000F0CE84E10E94E41C8EE10E94E41C84E970 +:103D10000E94E41C86E00E94E41C80E10E94E41CF6 +:103D2000B6CEC0E0D0E008E011E00E94B81CF80177 +:103D300081938F0121968091080290910902C81702 +:103D4000D90798F341CF80910C02816080930C02D7 +:103D500034CF82E00E94051D9ACE81E00E94051DAD +:103D600096CE80E10E94051D92CE8091070187FDCD +:103D700080C010920B028091060190910701880F7C +:103D8000991F90930701809306018091080280FF9C +:103D900009C080910802909109020196909309024E +:103DA00080930802F894F999FECF1127E09106015B +:103DB000F0910701C8E0D1E08091080290910902DA +:103DC000103091F40091570001700130D9F303E0F5 +:103DD00000935700E8950091570001700130D9F326 +:103DE00001E100935700E895099019900091570060 +:103DF00001700130D9F301E000935700E895139565 +:103E0000103498F011270091570001700130D9F358 +:103E100005E000935700E8950091570001700130CC +:103E2000D9F301E100935700E8953296029709F023 +:103E3000C7CF103011F00296E5CF1124EECE81FFEE +:103E40000CC03196F0930701E093060149CF8091B1 +:103E50000C02816080930C0215CF84910E94E41CB7 +:103E60002091080230910902E0910601F0910701CA +:103E7000E8CF81E080930B027ECF0F931F930E94C7 +:103E8000B81C182F0E94E41C0E94B81C082F0E9426 +:103E9000E41C11362CF0175501363CF0075508C0CC +:103EA0001033D4F310530136CCF700330CF0005329 +:103EB0001295107F100F812F992787FD90951F91E4 +:103EC0000F9108951F93282F992787FD9095807F44 +:103ED00090709595879595958795959587959595E6 +:103EE00087958A304CF0982F995A822F8F708A309C +:103EF0004CF0182F195A08C0982F905D822F8F70A0 +:103F00008A30BCF7182F105D892F0E94E41C812F86 +:083F10000E94E41C1F910895BA +:023F1800800027 +:0400000300003800C1 +:00000001FF diff --git a/test/ardmake/hardware/bootloaders/lilypad/src/ATmegaBOOT.c b/test/ardmake/hardware/bootloaders/lilypad/src/ATmegaBOOT.c new file mode 100644 index 0000000..915bc57 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/lilypad/src/ATmegaBOOT.c @@ -0,0 +1,979 @@ +/**********************************************************/ +/* Serial Bootloader for Atmel megaAVR Controllers */ +/* */ +/* tested with ATmega8, ATmega128 and ATmega168 */ +/* should work with other mega's, see code for details */ +/* */ +/* ATmegaBOOT.c */ +/* */ +/* 20070626: hacked for Arduino Diecimila (which auto- */ +/* resets when a USB connection is made to it) */ +/* by D. Mellis */ +/* 20060802: hacked for Arduino by D. Cuartielles */ +/* based on a previous hack by D. Mellis */ +/* and D. Cuartielles */ +/* */ +/* Monitor and debug functions were added to the original */ +/* code by Dr. Erik Lins, chip45.com. (See below) */ +/* */ +/* Thanks to Karl Pitrich for fixing a bootloader pin */ +/* problem and more informative LED blinking! */ +/* */ +/* For the latest version see: */ +/* http://www.chip45.com/ */ +/* */ +/* ------------------------------------------------------ */ +/* */ +/* based on stk500boot.c */ +/* Copyright (c) 2003, Jason P. Kyle */ +/* All rights reserved. */ +/* see avr1.org for original file and information */ +/* */ +/* This program is free software; you can redistribute it */ +/* and/or modify it under the terms of the GNU General */ +/* Public License as published by the Free Software */ +/* Foundation; either version 2 of the License, or */ +/* (at your option) any later version. */ +/* */ +/* This program is distributed in the hope that it will */ +/* be useful, but WITHOUT ANY WARRANTY; without even the */ +/* implied warranty of MERCHANTABILITY or FITNESS FOR A */ +/* PARTICULAR PURPOSE. See the GNU General Public */ +/* License for more details. */ +/* */ +/* You should have received a copy of the GNU General */ +/* Public License along with this program; if not, write */ +/* to the Free Software Foundation, Inc., */ +/* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +/* */ +/* Licence can be viewed at */ +/* http://www.fsf.org/licenses/gpl.txt */ +/* */ +/* Target = Atmel AVR m128,m64,m32,m16,m8,m162,m163,m169, */ +/* m8515,m8535. ATmega161 has a very small boot block so */ +/* isn't supported. */ +/* */ +/* Tested with m168 */ +/**********************************************************/ + +/* $Id$ */ + + +/* some includes */ +#include +#include +#include +#include +#include + + +/* the current avr-libc eeprom functions do not support the ATmega168 */ +/* own eeprom write/read functions are used instead */ +#ifndef __AVR_ATmega168__ +#include +#endif + +/* Use the F_CPU defined in Makefile */ + +/* 20060803: hacked by DojoCorp */ +/* 20070626: hacked by David A. Mellis to decrease waiting time for auto-reset */ +/* set the waiting time for the bootloader */ +/* get this from the Makefile instead */ +/* #define MAX_TIME_COUNT (F_CPU>>4) */ + +/* 20070707: hacked by David A. Mellis - after this many errors give up and launch application */ +#define MAX_ERROR_COUNT 5 + +/* set the UART baud rate */ +/* 20060803: hacked by DojoCorp */ +//#define BAUD_RATE 115200 +#define BAUD_RATE 19200 + + +/* SW_MAJOR and MINOR needs to be updated from time to time to avoid warning message from AVR Studio */ +/* never allow AVR Studio to do an update !!!! */ +#define HW_VER 0x02 +#define SW_MAJOR 0x01 +#define SW_MINOR 0x10 + + +/* Adjust to suit whatever pin your hardware uses to enter the bootloader */ +/* ATmega128 has two UARTS so two pins are used to enter bootloader and select UART */ +/* BL0... means UART0, BL1... means UART1 */ +#ifdef __AVR_ATmega128__ +#define BL_DDR DDRF +#define BL_PORT PORTF +#define BL_PIN PINF +#define BL0 PINF7 +#define BL1 PINF6 +#else +/* other ATmegas have only one UART, so only one pin is defined to enter bootloader */ +#define BL_DDR DDRD +#define BL_PORT PORTD +#define BL_PIN PIND +#define BL PIND6 +#endif + + +/* onboard LED is used to indicate, that the bootloader was entered (3x flashing) */ +/* if monitor functions are included, LED goes on after monitor was entered */ +#ifdef __AVR_ATmega128__ +/* Onboard LED is connected to pin PB7 (e.g. Crumb128, PROBOmega128, Savvy128) */ +#define LED_DDR DDRB +#define LED_PORT PORTB +#define LED_PIN PINB +#define LED PINB7 +#else +/* Onboard LED is connected to pin PB2 (e.g. Crumb8, Crumb168) */ +#define LED_DDR DDRB +#define LED_PORT PORTB +#define LED_PIN PINB +/* 20060803: hacked by DojoCorp, LED pin is B5 in Arduino */ +/* #define LED PINB2 */ +#define LED PINB5 +#endif + + +/* monitor functions will only be compiled when using ATmega128, due to bootblock size constraints */ +#ifdef __AVR_ATmega128__ +#define MONITOR +#endif + + +/* define various device id's */ +/* manufacturer byte is always the same */ +#define SIG1 0x1E // Yep, Atmel is the only manufacturer of AVR micros. Single source :( + +#if defined __AVR_ATmega128__ +#define SIG2 0x97 +#define SIG3 0x02 +#define PAGE_SIZE 0x80U //128 words + +#elif defined __AVR_ATmega64__ +#define SIG2 0x96 +#define SIG3 0x02 +#define PAGE_SIZE 0x80U //128 words + +#elif defined __AVR_ATmega32__ +#define SIG2 0x95 +#define SIG3 0x02 +#define PAGE_SIZE 0x40U //64 words + +#elif defined __AVR_ATmega16__ +#define SIG2 0x94 +#define SIG3 0x03 +#define PAGE_SIZE 0x40U //64 words + +#elif defined __AVR_ATmega8__ +#define SIG2 0x93 +#define SIG3 0x07 +#define PAGE_SIZE 0x20U //32 words + +#elif defined __AVR_ATmega88__ +#define SIG2 0x93 +#define SIG3 0x0a +#define PAGE_SIZE 0x20U //32 words + +#elif defined __AVR_ATmega168__ +#define SIG2 0x94 +#define SIG3 0x06 +#define PAGE_SIZE 0x40U //64 words + +#elif defined __AVR_ATmega162__ +#define SIG2 0x94 +#define SIG3 0x04 +#define PAGE_SIZE 0x40U //64 words + +#elif defined __AVR_ATmega163__ +#define SIG2 0x94 +#define SIG3 0x02 +#define PAGE_SIZE 0x40U //64 words + +#elif defined __AVR_ATmega169__ +#define SIG2 0x94 +#define SIG3 0x05 +#define PAGE_SIZE 0x40U //64 words + +#elif defined __AVR_ATmega8515__ +#define SIG2 0x93 +#define SIG3 0x06 +#define PAGE_SIZE 0x20U //32 words + +#elif defined __AVR_ATmega8535__ +#define SIG2 0x93 +#define SIG3 0x08 +#define PAGE_SIZE 0x20U //32 words +#endif + + +/* function prototypes */ +void putch(char); +char getch(void); +void getNch(uint8_t); +void byte_response(uint8_t); +void nothing_response(void); +char gethex(void); +void puthex(char); +void flash_led(uint8_t); + +/* some variables */ +union address_union { + uint16_t word; + uint8_t byte[2]; +} address; + +union length_union { + uint16_t word; + uint8_t byte[2]; +} length; + +struct flags_struct { + unsigned eeprom : 1; + unsigned rampz : 1; +} flags; + +uint8_t buff[256]; +uint8_t address_high; + +uint8_t pagesz=0x80; + +uint8_t i; +uint8_t bootuart = 0; + +uint8_t error_count = 0; + +void (*app_start)(void) = 0x0000; + + +/* main program starts here */ +int main(void) +{ + uint8_t ch,ch2; + uint16_t w; + + asm volatile("nop\n\t"); + + /* set pin direction for bootloader pin and enable pullup */ + /* for ATmega128, two pins need to be initialized */ +#ifdef __AVR_ATmega128__ + BL_DDR &= ~_BV(BL0); + BL_DDR &= ~_BV(BL1); + BL_PORT |= _BV(BL0); + BL_PORT |= _BV(BL1); +#else + /* We run the bootloader regardless of the state of this pin. Thus, don't + put it in a different state than the other pins. --DAM, 070709 + BL_DDR &= ~_BV(BL); + BL_PORT |= _BV(BL); + */ +#endif + + +#ifdef __AVR_ATmega128__ + /* check which UART should be used for booting */ + if(bit_is_clear(BL_PIN, BL0)) { + bootuart = 1; + } + else if(bit_is_clear(BL_PIN, BL1)) { + bootuart = 2; + } +#endif + + /* check if flash is programmed already, if not start bootloader anyway */ + if(pgm_read_byte_near(0x0000) != 0xFF) { + +#ifdef __AVR_ATmega128__ + /* no UART was selected, start application */ + if(!bootuart) { + app_start(); + } +#else + /* check if bootloader pin is set low */ + /* we don't start this part neither for the m8, nor m168 */ + //if(bit_is_set(BL_PIN, BL)) { + // app_start(); + // } +#endif + } + +#ifdef __AVR_ATmega128__ + /* no bootuart was selected, default to uart 0 */ + if(!bootuart) { + bootuart = 1; + } +#endif + + + /* initialize UART(s) depending on CPU defined */ +#ifdef __AVR_ATmega128__ + if(bootuart == 1) { + UBRR0L = (uint8_t)(F_CPU/(BAUD_RATE*16L)-1); + UBRR0H = (F_CPU/(BAUD_RATE*16L)-1) >> 8; + UCSR0A = 0x00; + UCSR0C = 0x06; + UCSR0B = _BV(TXEN0)|_BV(RXEN0); + } + if(bootuart == 2) { + UBRR1L = (uint8_t)(F_CPU/(BAUD_RATE*16L)-1); + UBRR1H = (F_CPU/(BAUD_RATE*16L)-1) >> 8; + UCSR1A = 0x00; + UCSR1C = 0x06; + UCSR1B = _BV(TXEN1)|_BV(RXEN1); + } +#elif defined __AVR_ATmega163__ + UBRR = (uint8_t)(F_CPU/(BAUD_RATE*16L)-1); + UBRRHI = (F_CPU/(BAUD_RATE*16L)-1) >> 8; + UCSRA = 0x00; + UCSRB = _BV(TXEN)|_BV(RXEN); +#elif defined __AVR_ATmega168__ + UBRR0L = (uint8_t)(F_CPU/(BAUD_RATE*16L)-1); + UBRR0H = (F_CPU/(BAUD_RATE*16L)-1) >> 8; + UCSR0B = (1<>8; // set baud rate + UBRRL = (((F_CPU/BAUD_RATE)/16)-1); + UCSRB = (1<> 8; + UCSRA = 0x00; + UCSRC = 0x06; + UCSRB = _BV(TXEN)|_BV(RXEN); +#endif + + /* set LED pin as output */ + LED_DDR |= _BV(LED); + + + /* flash onboard LED to signal entering of bootloader */ +#ifdef __AVR_ATmega128__ + // 4x for UART0, 5x for UART1 + flash_led(NUM_LED_FLASHES + bootuart); +#else + flash_led(NUM_LED_FLASHES); +#endif + + /* 20050803: by DojoCorp, this is one of the parts provoking the + system to stop listening, cancelled from the original */ + //putch('\0'); + + + /* forever loop */ + for (;;) { + + /* get character from UART */ + ch = getch(); + + /* A bunch of if...else if... gives smaller code than switch...case ! */ + + /* Hello is anyone home ? */ + if(ch=='0') { + nothing_response(); + } + + + /* Request programmer ID */ + /* Not using PROGMEM string due to boot block in m128 being beyond 64kB boundry */ + /* Would need to selectively manipulate RAMPZ, and it's only 9 characters anyway so who cares. */ + else if(ch=='1') { + if (getch() == ' ') { + putch(0x14); + putch('A'); + putch('V'); + putch('R'); + putch(' '); + putch('I'); + putch('S'); + putch('P'); + putch(0x10); + } else { + if (++error_count == MAX_ERROR_COUNT) + app_start(); + } + } + + + /* AVR ISP/STK500 board commands DON'T CARE so default nothing_response */ + else if(ch=='@') { + ch2 = getch(); + if (ch2>0x85) getch(); + nothing_response(); + } + + + /* AVR ISP/STK500 board requests */ + else if(ch=='A') { + ch2 = getch(); + if(ch2==0x80) byte_response(HW_VER); // Hardware version + else if(ch2==0x81) byte_response(SW_MAJOR); // Software major version + else if(ch2==0x82) byte_response(SW_MINOR); // Software minor version + else if(ch2==0x98) byte_response(0x03); // Unknown but seems to be required by avr studio 3.56 + else byte_response(0x00); // Covers various unnecessary responses we don't care about + } + + + /* Device Parameters DON'T CARE, DEVICE IS FIXED */ + else if(ch=='B') { + getNch(20); + nothing_response(); + } + + + /* Parallel programming stuff DON'T CARE */ + else if(ch=='E') { + getNch(5); + nothing_response(); + } + + + /* Enter programming mode */ + else if(ch=='P') { + nothing_response(); + } + + + /* Leave programming mode */ + else if(ch=='Q') { + nothing_response(); + } + + + /* Erase device, don't care as we will erase one page at a time anyway. */ + else if(ch=='R') { + nothing_response(); + } + + + /* Set address, little endian. EEPROM in bytes, FLASH in words */ + /* Perhaps extra address bytes may be added in future to support > 128kB FLASH. */ + /* This might explain why little endian was used here, big endian used everywhere else. */ + else if(ch=='U') { + address.byte[0] = getch(); + address.byte[1] = getch(); + nothing_response(); + } + + + /* Universal SPI programming command, disabled. Would be used for fuses and lock bits. */ + else if(ch=='V') { + getNch(4); + byte_response(0x00); + } + + + /* Write memory, length is big endian and is in bytes */ + else if(ch=='d') { + length.byte[1] = getch(); + length.byte[0] = getch(); + flags.eeprom = 0; + if (getch() == 'E') flags.eeprom = 1; + for (w=0;w127) address_high = 0x01; //Only possible with m128, m256 will need 3rd address byte. FIXME + else address_high = 0x00; +#ifdef __AVR_ATmega128__ + RAMPZ = address_high; +#endif + address.word = address.word << 1; //address * 2 -> byte location + /* if ((length.byte[0] & 0x01) == 0x01) length.word++; //Even up an odd number of bytes */ + if ((length.byte[0] & 0x01)) length.word++; //Even up an odd number of bytes + cli(); //Disable interrupts, just to be sure + // HACKME: EEPE used to be EEWE + while(bit_is_set(EECR,EEPE)); //Wait for previous EEPROM writes to complete + asm volatile( + "clr r17 \n\t" //page_word_count + "lds r30,address \n\t" //Address of FLASH location (in bytes) + "lds r31,address+1 \n\t" + "ldi r28,lo8(buff) \n\t" //Start of buffer array in RAM + "ldi r29,hi8(buff) \n\t" + "lds r24,length \n\t" //Length of data to be written (in bytes) + "lds r25,length+1 \n\t" + "length_loop: \n\t" //Main loop, repeat for number of words in block + "cpi r17,0x00 \n\t" //If page_word_count=0 then erase page + "brne no_page_erase \n\t" + "wait_spm1: \n\t" + "lds r16,%0 \n\t" //Wait for previous spm to complete + "andi r16,1 \n\t" + "cpi r16,1 \n\t" + "breq wait_spm1 \n\t" + "ldi r16,0x03 \n\t" //Erase page pointed to by Z + "sts %0,r16 \n\t" + "spm \n\t" +#ifdef __AVR_ATmega163__ + ".word 0xFFFF \n\t" + "nop \n\t" +#endif + "wait_spm2: \n\t" + "lds r16,%0 \n\t" //Wait for previous spm to complete + "andi r16,1 \n\t" + "cpi r16,1 \n\t" + "breq wait_spm2 \n\t" + + "ldi r16,0x11 \n\t" //Re-enable RWW section + "sts %0,r16 \n\t" + "spm \n\t" +#ifdef __AVR_ATmega163__ + ".word 0xFFFF \n\t" + "nop \n\t" +#endif + "no_page_erase: \n\t" + "ld r0,Y+ \n\t" //Write 2 bytes into page buffer + "ld r1,Y+ \n\t" + + "wait_spm3: \n\t" + "lds r16,%0 \n\t" //Wait for previous spm to complete + "andi r16,1 \n\t" + "cpi r16,1 \n\t" + "breq wait_spm3 \n\t" + "ldi r16,0x01 \n\t" //Load r0,r1 into FLASH page buffer + "sts %0,r16 \n\t" + "spm \n\t" + + "inc r17 \n\t" //page_word_count++ + "cpi r17,%1 \n\t" + "brlo same_page \n\t" //Still same page in FLASH + "write_page: \n\t" + "clr r17 \n\t" //New page, write current one first + "wait_spm4: \n\t" + "lds r16,%0 \n\t" //Wait for previous spm to complete + "andi r16,1 \n\t" + "cpi r16,1 \n\t" + "breq wait_spm4 \n\t" +#ifdef __AVR_ATmega163__ + "andi r30,0x80 \n\t" // m163 requires Z6:Z1 to be zero during page write +#endif + "ldi r16,0x05 \n\t" //Write page pointed to by Z + "sts %0,r16 \n\t" + "spm \n\t" +#ifdef __AVR_ATmega163__ + ".word 0xFFFF \n\t" + "nop \n\t" + "ori r30,0x7E \n\t" // recover Z6:Z1 state after page write (had to be zero during write) +#endif + "wait_spm5: \n\t" + "lds r16,%0 \n\t" //Wait for previous spm to complete + "andi r16,1 \n\t" + "cpi r16,1 \n\t" + "breq wait_spm5 \n\t" + "ldi r16,0x11 \n\t" //Re-enable RWW section + "sts %0,r16 \n\t" + "spm \n\t" +#ifdef __AVR_ATmega163__ + ".word 0xFFFF \n\t" + "nop \n\t" +#endif + "same_page: \n\t" + "adiw r30,2 \n\t" //Next word in FLASH + "sbiw r24,2 \n\t" //length-2 + "breq final_write \n\t" //Finished + "rjmp length_loop \n\t" + "final_write: \n\t" + "cpi r17,0 \n\t" + "breq block_done \n\t" + "adiw r24,2 \n\t" //length+2, fool above check on length after short page write + "rjmp write_page \n\t" + "block_done: \n\t" + "clr __zero_reg__ \n\t" //restore zero register +#if defined __AVR_ATmega168__ + : "=m" (SPMCSR) : "M" (PAGE_SIZE) : "r0","r16","r17","r24","r25","r28","r29","r30","r31" +#else + : "=m" (SPMCR) : "M" (PAGE_SIZE) : "r0","r16","r17","r24","r25","r28","r29","r30","r31" +#endif + ); + /* Should really add a wait for RWW section to be enabled, don't actually need it since we never */ + /* exit the bootloader without a power cycle anyhow */ + } + putch(0x14); + putch(0x10); + } else { + if (++error_count == MAX_ERROR_COUNT) + app_start(); + } + } + + + /* Read memory block mode, length is big endian. */ + else if(ch=='t') { + length.byte[1] = getch(); + length.byte[0] = getch(); +#if defined __AVR_ATmega128__ + if (address.word>0x7FFF) flags.rampz = 1; // No go with m256, FIXME + else flags.rampz = 0; +#endif + if (getch() == 'E') flags.eeprom = 1; + else { + flags.eeprom = 0; + address.word = address.word << 1; // address * 2 -> byte location + } + if (getch() == ' ') { // Command terminator + putch(0x14); + for (w=0;w < length.word;w++) { // Can handle odd and even lengths okay + if (flags.eeprom) { // Byte access EEPROM read +#ifdef __AVR_ATmega168__ + while(EECR & (1<= 'a') { + ah = ah - 'a' + 0x0a; + } else if(ah >= '0') { + ah -= '0'; + } + if(al >= 'a') { + al = al - 'a' + 0x0a; + } else if(al >= '0') { + al -= '0'; + } + return (ah << 4) + al; +} + + +void puthex(char ch) { + char ah,al; + + ah = (ch & 0xf0) >> 4; + if(ah >= 0x0a) { + ah = ah - 0x0a + 'a'; + } else { + ah += '0'; + } + al = (ch & 0x0f); + if(al >= 0x0a) { + al = al - 0x0a + 'a'; + } else { + al += '0'; + } + putch(ah); + putch(al); +} + + +void putch(char ch) +{ +#ifdef __AVR_ATmega128__ + if(bootuart == 1) { + while (!(UCSR0A & _BV(UDRE0))); + UDR0 = ch; + } + else if (bootuart == 2) { + while (!(UCSR1A & _BV(UDRE1))); + UDR1 = ch; + } +#elif defined __AVR_ATmega168__ + while (!(UCSR0A & _BV(UDRE0))); + UDR0 = ch; +#else + /* m8,16,32,169,8515,8535,163 */ + while (!(UCSRA & _BV(UDRE))); + UDR = ch; +#endif +} + + +char getch(void) +{ +#ifdef __AVR_ATmega128__ + if(bootuart == 1) { + while(!(UCSR0A & _BV(RXC0))); + return UDR0; + } + else if(bootuart == 2) { + while(!(UCSR1A & _BV(RXC1))); + return UDR1; + } + return 0; +#elif defined __AVR_ATmega168__ + uint32_t count = 0; + while(!(UCSR0A & _BV(RXC0))){ + /* 20060803 DojoCorp:: Addon coming from the previous Bootloader*/ + /* HACKME:: here is a good place to count times*/ + count++; + if (count > MAX_TIME_COUNT) + app_start(); + } + return UDR0; +#else + /* m8,16,32,169,8515,8535,163 */ + uint32_t count = 0; + while(!(UCSRA & _BV(RXC))){ + /* 20060803 DojoCorp:: Addon coming from the previous Bootloader*/ + /* HACKME:: here is a good place to count times*/ + count++; + if (count > MAX_TIME_COUNT) + app_start(); + } + return UDR; +#endif +} + + +void getNch(uint8_t count) +{ + uint8_t i; + for(i=0;i $@ + +%.srec: %.elf + $(OBJCOPY) -j .text -j .data -O srec $< $@ + +%.bin: %.elf + $(OBJCOPY) -j .text -j .data -O binary $< $@ + +clean: + rm -rf *.o *.elf *.lst *.map *.sym *.lss *.eep *.srec *.bin *.hex + +install: + avrdude -p m168 -c stk500v2 -P /dev/cu.USA19H1b1P1.1 -e -u -U lock:w:0x3f:m -U efuse:w:0x00:m -U hfuse:w:0xdd:m -U lfuse:w:0xe2:m + avrdude -p m168 -c stk500v2 -P /dev/cu.USA19H1b1P1.1 -e -u -U flash:w:ATmegaBOOT_168.hex -U lock:w:0x0f:m diff --git a/test/ardmake/hardware/bootloaders/optiboot/Makefile b/test/ardmake/hardware/bootloaders/optiboot/Makefile new file mode 100644 index 0000000..0fd6005 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/optiboot/Makefile @@ -0,0 +1,239 @@ +# Makefile for ATmegaBOOT +# E.Lins, 18.7.2005 +# $Id$ +# +# Instructions +# +# To make bootloader .hex file: +# make diecimila +# make lilypad +# make ng +# etc... +# +# To burn bootloader .hex file: +# make diecimila_isp +# make lilypad_isp +# make ng_isp +# etc... + +# program name should not be changed... +PROGRAM = optiboot + +# enter the parameters for the avrdude isp tool +ISPTOOL = stk500v2 +ISPPORT = usb +ISPSPEED = -b 115200 + +MCU_TARGET = atmega168 +LDSECTION = --section-start=.text=0x3e00 + +# the efuse should really be 0xf8; since, however, only the lower +# three bits of that byte are used on the atmega168, avrdude gets +# confused if you specify 1's for the higher bits, see: +# http://tinker.it/now/2007/02/24/the-tale-of-avrdude-atmega168-and-extended-bits-fuses/ +# +# similarly, the lock bits should be 0xff instead of 0x3f (to +# unlock the bootloader section) and 0xcf instead of 0x0f (to +# lock it), but since the high two bits of the lock byte are +# unused, avrdude would get confused. + +ISPFUSES = avrdude -c $(ISPTOOL) -p $(MCU_TARGET) -P $(ISPPORT) $(ISPSPEED) \ +-e -u -U lock:w:0x3f:m -U efuse:w:0x$(EFUSE):m -U hfuse:w:0x$(HFUSE):m -U lfuse:w:0x$(LFUSE):m +ISPFLASH = avrdude -c $(ISPTOOL) -p $(MCU_TARGET) -P $(ISPPORT) $(ISPSPEED) \ +-U flash:w:$(PROGRAM)_$(TARGET).hex -U lock:w:0x0f:m + +STK500 = "C:\Program Files\Atmel\AVR Tools\STK500\Stk500.exe" +STK500-1 = $(STK500) -e -d$(MCU_TARGET) -pf -vf -if$(PROGRAM)_$(TARGET).hex \ +-lFF -LFF -f$(HFUSE)$(LFUSE) -EF8 -ms -q -cUSB -I200kHz -s -wt +STK500-2 = $(STK500) -d$(MCU_TARGET) -ms -q -lCF -LCF -cUSB -I200kHz -s -wt + +OBJ = $(PROGRAM).o +OPTIMIZE = -Os -fno-inline-small-functions -fno-split-wide-types -mshort-calls + +DEFS = +LIBS = + +CC = avr-gcc + +# Override is only needed by avr-lib build system. + +override CFLAGS = -g -Wall $(OPTIMIZE) -mmcu=$(MCU_TARGET) -DF_CPU=$(AVR_FREQ) $(DEFS) +override LDFLAGS = -Wl,$(LDSECTION) -Wl,--relax -nostartfiles + +OBJCOPY = avr-objcopy +OBJDUMP = avr-objdump + +# 20MHz clocked platforms +# +# These are capable of 230400 baud, or 115200 baud on PC (Arduino Avrdude issue) +# + +pro20: TARGET = pro_20mhz +pro20: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' +pro20: AVR_FREQ = 20000000L +pro20: $(PROGRAM)_pro_20mhz.hex +pro20: $(PROGRAM)_pro_20mhz.lst + +pro20_isp: pro20 +pro20_isp: TARGET = pro_20mhz +pro20_isp: HFUSE = DD # 2.7V brownout +pro20_isp: LFUSE = C6 # Full swing xtal (20MHz) 258CK/14CK+4.1ms +pro20_isp: EFUSE = 02 # 512 byte boot +pro20_isp: isp + +# 16MHz clocked platforms +# +# These are capable of 230400 baud, or 115200 baud on PC (Arduino Avrdude issue) +# + +pro16: TARGET = pro_16MHz +pro16: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' +pro16: AVR_FREQ = 16000000L +pro16: $(PROGRAM)_pro_16MHz.hex +pro16: $(PROGRAM)_pro_16MHz.lst + +pro16_isp: pro16 +pro16_isp: TARGET = pro_16MHz +pro16_isp: HFUSE = DD # 2.7V brownout +pro16_isp: LFUSE = C6 # Full swing xtal (20MHz) 258CK/14CK+4.1ms +pro16_isp: EFUSE = 02 # 512 byte boot +pro16_isp: isp + +# Diecimila and NG use identical bootloaders +# +diecimila: TARGET = diecimila +diecimila: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' +diecimila: AVR_FREQ = 16000000L +diecimila: $(PROGRAM)_diecimila.hex +diecimila: $(PROGRAM)_diecimila.lst + +diecimila_isp: diecimila +diecimila_isp: TARGET = diecimila +diecimila_isp: HFUSE = DD # 2.7V brownout +diecimila_isp: LFUSE = FF # Low power xtal (16MHz) 16KCK/14CK+65ms +diecimila_isp: EFUSE = 02 # 512 byte boot +diecimila_isp: isp + +atmega328: TARGET = atmega328 +atmega328: MCU_TARGET = atmega328p +atmega328: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' +atmega328: AVR_FREQ = 16000000L +atmega328: LDSECTION = --section-start=.text=0x7e00 +atmega328: $(PROGRAM)_atmega328.hex +atmega328: $(PROGRAM)_atmega328.lst + +atmega328_isp: atmega328 +atmega328_isp: TARGET = atmega328 +atmega328_isp: MCU_TARGET = atmega328p +atmega328_isp: HFUSE = DE # 512 byte boot +atmega328_isp: LFUSE = FF # Low power xtal (16MHz) 16KCK/14CK+65ms +atmega328_isp: EFUSE = 05 # 2.7V brownout +atmega328_isp: isp + +# 8MHz clocked platforms +# +# These are capable of 115200 baud +# + +lilypad: TARGET = lilypad +lilypad: CFLAGS += '-DLED_START_FLASHES=3' '-DSOFT_UART' '-DBAUD_RATE=115200' +lilypad: AVR_FREQ = 8000000L +lilypad: $(PROGRAM)_lilypad.hex +lilypad: $(PROGRAM)_lilypad.lst + +lilypad_isp: lilypad +lilypad_isp: TARGET = lilypad +lilypad_isp: HFUSE = DD # 2.7V brownout +lilypad_isp: LFUSE = E2 # Internal 8MHz osc (8MHz) Slow rising power +lilypad_isp: EFUSE = 02 # 512 byte boot +lilypad_isp: isp + +lilypad_resonator: TARGET = lilypad_resonator +lilypad_resonator: CFLAGS += '-DLED_START_FLASHES=3' '-DSOFT_UART' '-DBAUD_RATE=115200' +lilypad_resonator: AVR_FREQ = 8000000L +lilypad_resonator: $(PROGRAM)_lilypad_resonator.hex +lilypad_resonator: $(PROGRAM)_lilypad_resonator.lst + +lilypad_resonator_isp: lilypad_resonator +lilypad_resonator_isp: TARGET = lilypad_resonator +lilypad_resonator_isp: HFUSE = DD # 2.7V brownout +lilypad_resonator_isp: LFUSE = C6 # Full swing xtal (20MHz) 258CK/14CK+4.1ms +lilypad_resonator_isp: EFUSE = 02 # 512 byte boot +lilypad_resonator_isp: isp + +pro8: TARGET = pro_8MHz +pro8: CFLAGS += '-DLED_START_FLASHES=3' '-DSOFT_UART' '-DBAUD_RATE=115200' +pro8: AVR_FREQ = 8000000L +pro8: $(PROGRAM)_pro_8MHz.hex +pro8: $(PROGRAM)_pro_8MHz.lst + +pro8_isp: pro8 +pro8_isp: TARGET = pro_8MHz +pro8_isp: HFUSE = DD # 2.7V brownout +pro8_isp: LFUSE = C6 # Full swing xtal (20MHz) 258CK/14CK+4.1ms +pro8_isp: EFUSE = 02 # 512 byte boot +pro8_isp: isp + +atmega328_pro8: TARGET = atmega328_pro_8MHz +atmega328_pro8: MCU_TARGET = atmega328p +atmega328_pro8: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' +atmega328_pro8: AVR_FREQ = 8000000L +atmega328_pro8: LDSECTION = --section-start=.text=0x7e00 +atmega328_pro8: $(PROGRAM)_atmega328_pro_8MHz.hex +atmega328_pro8: $(PROGRAM)_atmega328_pro_8MHz.lst + +atmega328_pro8_isp: atmega328_pro8 +atmega328_pro8_isp: TARGET = atmega328_pro_8MHz +atmega328_pro8_isp: MCU_TARGET = atmega328p +atmega328_pro8_isp: HFUSE = DE # 512 byte boot +atmega328_pro8_isp: LFUSE = FF # Low power xtal (16MHz) 16KCK/14CK+65ms +atmega328_pro8_isp: EFUSE = 05 # 2.7V brownout +atmega328_pro8_isp: isp + +# 1MHz clocked platforms +# +# These are capable of 9600 baud +# + +luminet: TARGET = luminet +luminet: MCU_TARGET = attiny84 +luminet: CFLAGS += '-DLED_START_FLASHES=3' '-DSOFT_UART' '-DBAUD_RATE=9600' +luminet: CFLAGS += '-DVIRTUAL_BOOT_PARTITION' +luminet: AVR_FREQ = 1000000L +luminet: LDSECTION = --section-start=.text=0x1d00 +luminet: $(PROGRAM)_luminet.hex +luminet: $(PROGRAM)_luminet.lst + +luminet_isp: luminet +luminet_isp: TARGET = luminet +luminet_isp: MCU_TARGET = attiny84 +luminet_isp: HFUSE = DF # Brownout disabled +luminet_isp: LFUSE = 62 # 1MHz internal oscillator, slowly rising power +luminet_isp: EFUSE = FE # Self-programming enable +luminet_isp: isp + +isp: $(TARGET) + $(ISPFUSES) + $(ISPFLASH) + +isp-stk500: $(PROGRAM)_$(TARGET).hex + $(STK500-1) + $(STK500-2) + +%.elf: $(OBJ) + $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $^ $(LIBS) + +clean: + rm -rf *.o *.elf *.lst *.map *.sym *.lss *.eep *.srec *.bin *.hex + +%.lst: %.elf + $(OBJDUMP) -h -S $< > $@ + +%.hex: %.elf + $(OBJCOPY) -j .text -j .data -O ihex $< $@ + +%.srec: %.elf + $(OBJCOPY) -j .text -j .data -O srec $< $@ + +%.bin: %.elf + $(OBJCOPY) -j .text -j .data -O binary $< $@ diff --git a/test/ardmake/hardware/bootloaders/optiboot/makeall b/test/ardmake/hardware/bootloaders/optiboot/makeall new file mode 100644 index 0000000..7a0b82d --- /dev/null +++ b/test/ardmake/hardware/bootloaders/optiboot/makeall @@ -0,0 +1,13 @@ +#!/bin/bash +make clean +make lilypad +make lilypad_resonator +make pro8 +make pro16 +make pro20 +make diecimila +make ng +make atmega328 +make atmega328_pro8 +make luminet + diff --git a/test/ardmake/hardware/bootloaders/optiboot/optiboot.c b/test/ardmake/hardware/bootloaders/optiboot/optiboot.c new file mode 100644 index 0000000..af92995 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/optiboot/optiboot.c @@ -0,0 +1,536 @@ +/**********************************************************/ +/* Optiboot bootloader for Arduino */ +/* */ +/* Heavily optimised bootloader that is faster and */ +/* smaller than the Arduino standard bootloader */ +/* */ +/* Enhancements: */ +/* Fits in 512 bytes, saving 1.5K of code space */ +/* Background page erasing speeds up programming */ +/* Higher baud rate speeds up programming */ +/* Written almost entirely in C */ +/* Customisable timeout with accurate timeconstant */ +/* */ +/* What you lose: */ +/* Implements a skeleton STK500 protocol which is */ +/* missing several features including EEPROM */ +/* programming and non-page-aligned writes */ +/* High baud rate breaks compatibility with standard */ +/* Arduino flash settings */ +/* */ +/* Currently supports: */ +/* ATmega168 based devices (Diecimila etc) */ +/* ATmega328P based devices (Duemilanove etc) */ +/* */ +/* Does not support: */ +/* ATmega1280 based devices (eg. Mega) */ +/* */ +/* Assumptions: */ +/* The code makes several assumptions that reduce the */ +/* code size. They are all true after a hardware reset, */ +/* but may not be true if the bootloader is called by */ +/* other means or on other hardware. */ +/* No interrupts can occur */ +/* UART and Timer 1 are set to their reset state */ +/* SP points to RAMEND */ +/* */ +/* Code builds on code, libraries and optimisations from: */ +/* stk500boot.c by Jason P. Kyle */ +/* Arduino bootloader http://arduino.cc */ +/* Spiff's 1K bootloader http://spiffie.org/know/arduino_1k_bootloader/bootloader.shtml */ +/* avr-libc project http://nongnu.org/avr-libc */ +/* Adaboot http://www.ladyada.net/library/arduino/bootloader.html */ +/* AVR305 Atmel Application Note */ +/* */ +/* This program is free software; you can redistribute it */ +/* and/or modify it under the terms of the GNU General */ +/* Public License as published by the Free Software */ +/* Foundation; either version 2 of the License, or */ +/* (at your option) any later version. */ +/* */ +/* This program is distributed in the hope that it will */ +/* be useful, but WITHOUT ANY WARRANTY; without even the */ +/* implied warranty of MERCHANTABILITY or FITNESS FOR A */ +/* PARTICULAR PURPOSE. See the GNU General Public */ +/* License for more details. */ +/* */ +/* You should have received a copy of the GNU General */ +/* Public License along with this program; if not, write */ +/* to the Free Software Foundation, Inc., */ +/* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +/* */ +/* Licence can be viewed at */ +/* http://www.fsf.org/licenses/gpl.txt */ +/* */ +/**********************************************************/ + +#include +#include +#include +#include + +//#define LED_DATA_FLASH + +#ifndef LED_START_FLASHES +#define LED_START_FLASHES 0 +#endif + +/* Build-time variables */ +/* BAUD_RATE Programming baud rate */ +/* LED_NO_FLASHES Number of LED flashes on boot */ +/* FLASH_TIME_MS Duration of each LED flash */ +/* BOOT_TIMEOUT_MS Serial port wait time before exiting bootloader */ + +/* set the UART baud rate */ +#ifndef BAUD_RATE +#define BAUD_RATE 19200 +#endif + +#if defined(__AVR_ATmega168__) || defined(__AVR_ATmega328P__) +/* Onboard LED is connected to pin PB5 in Arduino NG, Diecimila, and Duemilanove */ +#define LED_DDR DDRB +#define LED_PORT PORTB +#define LED_PIN PINB +#define LED PINB5 + +/* Ports for soft UART */ +#ifdef SOFT_UART +#define UART_PORT PORTD +#define UART_PIN PIND +#define UART_DDR DDRD +#define UART_TX_BIT 1 +#define UART_RX_BIT 0 +#endif +#endif + +#if defined(__AVR_ATtiny84__) +/* Onboard LED is connected to pin PB5 in Arduino NG, Diecimila, and Duemilanove */ +#define LED_DDR DDRA +#define LED_PORT PORTA +#define LED_PIN PINA +#define LED PINA4 + +/* Ports for soft UART - left port only for now*/ +#ifdef SOFT_UART +#define UART_PORT PORTA +#define UART_PIN PINA +#define UART_DDR DDRA +#define UART_TX_BIT 2 +#define UART_RX_BIT 3 +#endif +#endif + +/* STK500 constants list, from AVRDUDE */ +#define STK_OK 0x10 +#define STK_FAILED 0x11 // Not used +#define STK_UNKNOWN 0x12 // Not used +#define STK_NODEVICE 0x13 // Not used +#define STK_INSYNC 0x14 // ' ' +#define STK_NOSYNC 0x15 // Not used +#define ADC_CHANNEL_ERROR 0x16 // Not used +#define ADC_MEASURE_OK 0x17 // Not used +#define PWM_CHANNEL_ERROR 0x18 // Not used +#define PWM_ADJUST_OK 0x19 // Not used +#define CRC_EOP 0x20 // 'SPACE' +#define STK_GET_SYNC 0x30 // '0' +#define STK_GET_SIGN_ON 0x31 // '1' +#define STK_SET_PARAMETER 0x40 // '@' +#define STK_GET_PARAMETER 0x41 // 'A' +#define STK_SET_DEVICE 0x42 // 'B' +#define STK_SET_DEVICE_EXT 0x45 // 'E' +#define STK_ENTER_PROGMODE 0x50 // 'P' +#define STK_LEAVE_PROGMODE 0x51 // 'Q' +#define STK_CHIP_ERASE 0x52 // 'R' +#define STK_CHECK_AUTOINC 0x53 // 'S' +#define STK_LOAD_ADDRESS 0x55 // 'U' +#define STK_UNIVERSAL 0x56 // 'V' +#define STK_PROG_FLASH 0x60 // '`' +#define STK_PROG_DATA 0x61 // 'a' +#define STK_PROG_FUSE 0x62 // 'b' +#define STK_PROG_LOCK 0x63 // 'c' +#define STK_PROG_PAGE 0x64 // 'd' +#define STK_PROG_FUSE_EXT 0x65 // 'e' +#define STK_READ_FLASH 0x70 // 'p' +#define STK_READ_DATA 0x71 // 'q' +#define STK_READ_FUSE 0x72 // 'r' +#define STK_READ_LOCK 0x73 // 's' +#define STK_READ_PAGE 0x74 // 't' +#define STK_READ_SIGN 0x75 // 'u' +#define STK_READ_OSCCAL 0x76 // 'v' +#define STK_READ_FUSE_EXT 0x77 // 'w' +#define STK_READ_OSCCAL_EXT 0x78 // 'x' + +/* Watchdog settings */ +#define WATCHDOG_OFF (0) +#define WATCHDOG_16MS (_BV(WDE)) +#define WATCHDOG_32MS (_BV(WDP0) | _BV(WDE)) +#define WATCHDOG_64MS (_BV(WDP1) | _BV(WDE)) +#define WATCHDOG_125MS (_BV(WDP1) | _BV(WDP0) | _BV(WDE)) +#define WATCHDOG_250MS (_BV(WDP2) | _BV(WDE)) +#define WATCHDOG_500MS (_BV(WDP2) | _BV(WDP0) | _BV(WDE)) +#define WATCHDOG_1S (_BV(WDP2) | _BV(WDP1) | _BV(WDE)) +#define WATCHDOG_2S (_BV(WDP2) | _BV(WDP1) | _BV(WDP0) | _BV(WDE)) +#define WATCHDOG_4S (_BV(WDE3) | _BV(WDE)) +#define WATCHDOG_8S (_BV(WDE3) | _BV(WDE0) | _BV(WDE)) + +/* Function Prototypes */ +/* The main function is in init9, which removes the interrupt vector table */ +/* we don't need. It is also 'naked', which means the compiler does not */ +/* generate any entry or exit code itself. */ +int main(void) __attribute__ ((naked)) __attribute__ ((section (".init9"))); +void putch(char); +uint8_t getch(void); +static inline void getNch(uint8_t); /* "static inline" is a compiler hint to reduce code size */ +void verifySpace(); +static inline void flash_led(uint8_t); +uint8_t getLen(); +static inline void watchdogReset(); +void watchdogConfig(uint8_t x); +#ifdef SOFT_UART +void uartDelay() __attribute__ ((naked)); +#endif +void appStart() __attribute__ ((naked)); + +/* C zero initialises all global variables. However, that requires */ +/* These definitions are NOT zero initialised, but that doesn't matter */ +/* This allows us to drop the zero init code, saving us memory */ +#define buff ((uint8_t*)(0x100)) +#define address (*(uint16_t*)(0x200)) +#define length (*(uint8_t*)(0x202)) +#ifdef VIRTUAL_BOOT_PARTITION +#define rstVect (*(uint16_t*)(0x204)) +#define wdtVect (*(uint16_t*)(0x206)) +#endif +/* main program starts here */ +int main(void) { + // After the zero init loop, this is the first code to run. + // + // This code makes the following assumptions: + // No interrupts will execute + // SP points to RAMEND + // r1 contains zero + // + // If not, uncomment the following instructions: + // cli(); + // SP=RAMEND; // This is done by hardware reset + // asm volatile ("clr __zero_reg__"); + + uint8_t ch; + +#if LED_START_FLASHES > 0 + // Set up Timer 1 for timeout counter + TCCR1B = _BV(CS12) | _BV(CS10); // div 1024 +#endif +#ifndef SOFT_UART + UCSR0A = _BV(U2X0); //Double speed mode USART0 + UCSR0B = _BV(RXEN0) | _BV(TXEN0); + UCSR0C = _BV(UCSZ00) | _BV(UCSZ01); + UBRR0L = (uint8_t)( (F_CPU + BAUD_RATE * 4L) / (BAUD_RATE * 8L) - 1 ); +#endif + + // Adaboot no-wait mod + ch = MCUSR; + MCUSR = 0; + if (!(ch & _BV(EXTRF))) appStart(); + + // Set up watchdog to trigger after 500ms + watchdogConfig(WATCHDOG_500MS); + + /* Set LED pin as output */ + LED_DDR |= _BV(LED); + +#ifdef SOFT_UART + /* Set TX pin as output */ + UART_DDR |= _BV(UART_TX_BIT); +#endif + +#if LED_START_FLASHES > 0 + /* Flash onboard LED to signal entering of bootloader */ + flash_led(LED_START_FLASHES * 2); +#endif + + /* Forever loop */ + for (;;) { + /* get character from UART */ + ch = getch(); + + if(ch == STK_GET_PARAMETER) { + // GET PARAMETER returns a generic 0x03 reply - enough to keep Avrdude happy + getNch(1); + putch(0x03); + } + else if(ch == STK_SET_DEVICE) { + // SET DEVICE is ignored + getNch(20); + } + else if(ch == STK_SET_DEVICE_EXT) { + // SET DEVICE EXT is ignored + getNch(5); + } + else if(ch == STK_LOAD_ADDRESS) { + // LOAD ADDRESS + address = getch(); + address = (address & 0xff) | (getch() << 8); + address += address; // Convert from word address to byte address + verifySpace(); + } + else if(ch == STK_UNIVERSAL) { + // UNIVERSAL command is ignored + getNch(4); + putch(0x00); + } + /* Write memory, length is big endian and is in bytes */ + else if(ch == STK_PROG_PAGE) { + // PROGRAM PAGE - we support flash programming only, not EEPROM + uint8_t *bufPtr; + uint16_t addrPtr; + + getLen(); + + // Immediately start page erase - this will 4.5ms + boot_page_erase((uint16_t)(void*)address); + + // While that is going on, read in page contents + bufPtr = buff; + do *bufPtr++ = getch(); + while (--length); + + // Read command terminator, start reply + verifySpace(); + + // If only a partial page is to be programmed, the erase might not be complete. + // So check that here + boot_spm_busy_wait(); + +#ifdef VIRTUAL_BOOT_PARTITION + if ((uint16_t)(void*)address == 0) { + // This is the reset vector page. We need to live-patch the code so the + // bootloader runs. + // + // Move RESET vector to WDT vector + uint16_t vect = buff[0] | (buff[1]<<8); + rstVect = vect; + wdtVect = buff[10] | (buff[11]<<8); + vect -= 4; // Instruction is a relative jump (rjmp), so recalculate. + buff[10] = vect & 0xff; + buff[11] = vect >> 8; + + // Add jump to bootloader at RESET vector + buff[0] = 0x7f; + buff[1] = 0xce; // rjmp 0x1d00 instruction + } +#endif + + // Copy buffer into programming buffer + bufPtr = buff; + addrPtr = (uint16_t)(void*)address; + ch = SPM_PAGESIZE / 2; + do { + uint16_t a; + a = *bufPtr++; + a |= (*bufPtr++) << 8; + boot_page_fill((uint16_t)(void*)addrPtr,a); + addrPtr += 2; + } while (--ch); + + // Write from programming buffer + boot_page_write((uint16_t)(void*)address); + boot_spm_busy_wait(); + +#if defined(RWWSRE) + // Reenable read access to flash + boot_rww_enable(); +#endif + + } + /* Read memory block mode, length is big endian. */ + else if(ch == STK_READ_PAGE) { + // READ PAGE - we only read flash + getLen(); + verifySpace(); +#ifdef VIRTUAL_BOOT_PARTITION + do { + // Undo vector patch in bottom page so verify passes + if (address == 0) ch=rstVect & 0xff; + else if (address == 1) ch=rstVect >> 8; + else if (address == 10) ch=wdtVect & 0xff; + else if (address == 11) ch=wdtVect >> 8; + else ch = pgm_read_byte_near(address); + address++; + putch(ch); + } while (--length); +#else + do putch(pgm_read_byte_near(address++)); + while (--length); +#endif + } + + /* Get device signature bytes */ + else if(ch == STK_READ_SIGN) { + // READ SIGN - return what Avrdude wants to hear + verifySpace(); + putch(SIGNATURE_0); + putch(SIGNATURE_1); + putch(SIGNATURE_2); + } + else if (ch == 'Q') { + // Adaboot no-wait mod + watchdogConfig(WATCHDOG_16MS); + verifySpace(); + } + else { + // This covers the response to commands like STK_ENTER_PROGMODE + verifySpace(); + } + putch(STK_OK); + } +} + +void putch(char ch) { +#ifndef SOFT_UART + while (!(UCSR0A & _BV(UDRE0))); + UDR0 = ch; +#else + __asm__ __volatile__ ( + " com %[ch]\n" // ones complement, carry set + " sec\n" + "1: brcc 2f\n" + " cbi %[uartPort],%[uartBit]\n" + " rjmp 3f\n" + "2: sbi %[uartPort],%[uartBit]\n" + " nop\n" + "3: rcall uartDelay\n" + " rcall uartDelay\n" + " lsr %[ch]\n" + " dec %[bitcnt]\n" + " brne 1b\n" + : + : + [bitcnt] "d" (10), + [ch] "r" (ch), + [uartPort] "I" (_SFR_IO_ADDR(UART_PORT)), + [uartBit] "I" (UART_TX_BIT) + : + "r25" + ); +#endif +} + +uint8_t getch(void) { + uint8_t ch; + + watchdogReset(); + +#ifdef LED_DATA_FLASH + LED_PIN |= _BV(LED); +#endif + +#ifdef SOFT_UART + __asm__ __volatile__ ( + "1: sbic %[uartPin],%[uartBit]\n" // Wait for start edge + " rjmp 1b\n" + " rcall uartDelay\n" // Get to middle of start bit + "2: rcall uartDelay\n" // Wait 1 bit period + " rcall uartDelay\n" // Wait 1 bit period + " clc\n" + " sbic %[uartPin],%[uartBit]\n" + " sec\n" + " dec %[bitCnt]\n" + " breq 3f\n" + " ror %[ch]\n" + " rjmp 2b\n" + "3:\n" + : + [ch] "=r" (ch) + : + [bitCnt] "d" (9), + [uartPin] "I" (_SFR_IO_ADDR(UART_PIN)), + [uartBit] "I" (UART_RX_BIT) + : + "r25" +); +#else + while(!(UCSR0A & _BV(RXC0))); + ch = UDR0; +#endif + +#ifdef LED_DATA_FLASH + LED_PIN |= _BV(LED); +#endif + + return ch; +} + +#ifdef SOFT_UART +//#define UART_B_VALUE (((F_CPU/BAUD_RATE)-23)/6) +#define UART_B_VALUE (((F_CPU/BAUD_RATE)-20)/6) +#if UART_B_VALUE > 255 +#error Baud rate too slow for soft UART +#endif + +void uartDelay() { + __asm__ __volatile__ ( + "ldi r25,%[count]\n" + "1:dec r25\n" + "brne 1b\n" + "ret\n" + ::[count] "M" (UART_B_VALUE) + ); +} +#endif + +void getNch(uint8_t count) { + do getch(); while (--count); + verifySpace(); +} + +void verifySpace() { + if (getch() != CRC_EOP) appStart(); + putch(STK_INSYNC); +} + +#if LED_START_FLASHES > 0 +void flash_led(uint8_t count) { + do { + TCNT1 = -(F_CPU/(1024*16)); + TIFR1 = _BV(TOV1); + while(!(TIFR1 & _BV(TOV1))); + LED_PIN |= _BV(LED); + watchdogReset(); + } while (--count); +} +#endif + +uint8_t getLen() { + getch(); + length = getch(); + return getch(); +} + +// Watchdog functions. These are only safe with interrupts turned off. +void watchdogReset() { + __asm__ __volatile__ ( + "wdr\n" + ); +} + +void watchdogConfig(uint8_t x) { + WDTCSR = _BV(WDCE) | _BV(WDE); + WDTCSR = x; +} + +void appStart() { + watchdogConfig(WATCHDOG_OFF); + __asm__ __volatile__ ( +#ifdef VIRTUAL_BOOT_PARTITION + // Jump to WDT vector + "ldi r30,5\n" + "clr r31\n" +#else + // Jump to RST vector + "clr r30\n" + "clr r31\n" +#endif + "ijmp\n" + ); +} diff --git a/test/ardmake/hardware/bootloaders/optiboot/optiboot_atmega328.hex b/test/ardmake/hardware/bootloaders/optiboot/optiboot_atmega328.hex new file mode 100644 index 0000000..b1c8567 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/optiboot/optiboot_atmega328.hex @@ -0,0 +1,33 @@ +:107E000085E08093810082E08093C00088E18093C8 +:107E1000C10086E08093C20080E18093C40084B7F3 +:107E200014BE81FFD0D08DE0C8D0259A86E020E333 +:107E30003CEF91E0309385002093840096BBB09B8B +:107E4000FECF1D9AA8958150A9F7DD24D394A5E013 +:107E5000EA2EF1E1FF2EA4D0813421F481E0BED0DE +:107E600083E024C0823411F484E103C0853419F422 +:107E700085E0B4D08AC08535A1F492D0082F10E0F7 +:107E800010930102009300028BD090E0982F882776 +:107E9000802B912B880F991F9093010280930002F1 +:107EA00073C0863529F484E099D080E071D06DC02C +:107EB000843609F043C07CD0E0910002F0910102C9 +:107EC00083E080935700E895C0E0D1E069D08993C2 +:107ED000809102028150809302028823B9F778D002 +:107EE00007B600FCFDCF4091000250910102A0E0D6 +:107EF000B1E02C9130E011968C91119790E0982F81 +:107F00008827822B932B1296FA010C01D0925700EE +:107F1000E89511244E5F5F4FF1E0A038BF0749F7A5 +:107F2000E0910002F0910102E0925700E89507B657 +:107F300000FCFDCFF0925700E89527C08437B9F4D4 +:107F400037D046D0E0910002F09101023196F093D3 +:107F50000102E09300023197E4918E2F19D08091B5 +:107F60000202815080930202882361F70EC0853798 +:107F700039F42ED08EE10CD085E90AD08FE096CF6F +:107F8000813511F488E019D023D080E101D063CF8E +:107F9000982F8091C00085FFFCCF9093C600089574 +:107FA000A8958091C00087FFFCCF8091C6000895FE +:107FB000F7DFF6DF80930202F3CFE0E6F0E098E12E +:107FC00090838083089580E0F8DFEE27FF270994EF +:107FD000E7DF803209F0F7DF84E1DACF1F93182F53 +:0C7FE000DFDF1150E9F7F4DF1F91089576 +:0400000300007E007B +:00000001FF diff --git a/test/ardmake/hardware/bootloaders/optiboot/optiboot_atmega328.lst b/test/ardmake/hardware/bootloaders/optiboot/optiboot_atmega328.lst new file mode 100644 index 0000000..888871d --- /dev/null +++ b/test/ardmake/hardware/bootloaders/optiboot/optiboot_atmega328.lst @@ -0,0 +1,520 @@ + +optiboot_atmega328.elf: file format elf32-avr + +Sections: +Idx Name Size VMA LMA File off Algn + 0 .text 000001ec 00007e00 00007e00 00000054 2**1 + CONTENTS, ALLOC, LOAD, READONLY, CODE + 1 .debug_aranges 00000028 00000000 00000000 00000240 2**0 + CONTENTS, READONLY, DEBUGGING + 2 .debug_pubnames 0000006a 00000000 00000000 00000268 2**0 + CONTENTS, READONLY, DEBUGGING + 3 .debug_info 00000269 00000000 00000000 000002d2 2**0 + CONTENTS, READONLY, DEBUGGING + 4 .debug_abbrev 00000196 00000000 00000000 0000053b 2**0 + CONTENTS, READONLY, DEBUGGING + 5 .debug_line 000003d3 00000000 00000000 000006d1 2**0 + CONTENTS, READONLY, DEBUGGING + 6 .debug_frame 00000090 00000000 00000000 00000aa4 2**2 + CONTENTS, READONLY, DEBUGGING + 7 .debug_str 00000135 00000000 00000000 00000b34 2**0 + CONTENTS, READONLY, DEBUGGING + 8 .debug_loc 000001d1 00000000 00000000 00000c69 2**0 + CONTENTS, READONLY, DEBUGGING + 9 .debug_ranges 00000068 00000000 00000000 00000e3a 2**0 + CONTENTS, READONLY, DEBUGGING + +Disassembly of section .text: + +00007e00
: +#ifdef VIRTUAL_BOOT_PARTITION +#define rstVect (*(uint16_t*)(0x204)) +#define wdtVect (*(uint16_t*)(0x206)) +#endif +/* main program starts here */ +int main(void) { + 7e00: 85 e0 ldi r24, 0x05 ; 5 + 7e02: 80 93 81 00 sts 0x0081, r24 +#if LED_START_FLASHES > 0 + // Set up Timer 1 for timeout counter + TCCR1B = _BV(CS12) | _BV(CS10); // div 1024 +#endif +#ifndef SOFT_UART + UCSR0A = _BV(U2X0); //Double speed mode USART0 + 7e06: 82 e0 ldi r24, 0x02 ; 2 + 7e08: 80 93 c0 00 sts 0x00C0, r24 + UCSR0B = _BV(RXEN0) | _BV(TXEN0); + 7e0c: 88 e1 ldi r24, 0x18 ; 24 + 7e0e: 80 93 c1 00 sts 0x00C1, r24 + UCSR0C = _BV(UCSZ00) | _BV(UCSZ01); + 7e12: 86 e0 ldi r24, 0x06 ; 6 + 7e14: 80 93 c2 00 sts 0x00C2, r24 + UBRR0L = (uint8_t)( (F_CPU + BAUD_RATE * 4L) / (BAUD_RATE * 8L) - 1 ); + 7e18: 80 e1 ldi r24, 0x10 ; 16 + 7e1a: 80 93 c4 00 sts 0x00C4, r24 +#endif + + // Adaboot no-wait mod + ch = MCUSR; + 7e1e: 84 b7 in r24, 0x34 ; 52 + MCUSR = 0; + 7e20: 14 be out 0x34, r1 ; 52 + if (!(ch & _BV(EXTRF))) appStart(); + 7e22: 81 ff sbrs r24, 1 + 7e24: d0 d0 rcall .+416 ; 0x7fc6 + + // Set up watchdog to trigger after 500ms + watchdogConfig(WATCHDOG_500MS); + 7e26: 8d e0 ldi r24, 0x0D ; 13 + 7e28: c8 d0 rcall .+400 ; 0x7fba + + /* Set LED pin as output */ + LED_DDR |= _BV(LED); + 7e2a: 25 9a sbi 0x04, 5 ; 4 + 7e2c: 86 e0 ldi r24, 0x06 ; 6 +} + +#if LED_START_FLASHES > 0 +void flash_led(uint8_t count) { + do { + TCNT1 = -(F_CPU/(1024*16)); + 7e2e: 20 e3 ldi r18, 0x30 ; 48 + 7e30: 3c ef ldi r19, 0xFC ; 252 + TIFR1 = _BV(TOV1); + 7e32: 91 e0 ldi r25, 0x01 ; 1 +} + +#if LED_START_FLASHES > 0 +void flash_led(uint8_t count) { + do { + TCNT1 = -(F_CPU/(1024*16)); + 7e34: 30 93 85 00 sts 0x0085, r19 + 7e38: 20 93 84 00 sts 0x0084, r18 + TIFR1 = _BV(TOV1); + 7e3c: 96 bb out 0x16, r25 ; 22 + while(!(TIFR1 & _BV(TOV1))); + 7e3e: b0 9b sbis 0x16, 0 ; 22 + 7e40: fe cf rjmp .-4 ; 0x7e3e + LED_PIN |= _BV(LED); + 7e42: 1d 9a sbi 0x03, 5 ; 3 + return getch(); +} + +// Watchdog functions. These are only safe with interrupts turned off. +void watchdogReset() { + __asm__ __volatile__ ( + 7e44: a8 95 wdr + TCNT1 = -(F_CPU/(1024*16)); + TIFR1 = _BV(TOV1); + while(!(TIFR1 & _BV(TOV1))); + LED_PIN |= _BV(LED); + watchdogReset(); + } while (--count); + 7e46: 81 50 subi r24, 0x01 ; 1 + 7e48: a9 f7 brne .-22 ; 0x7e34 + /* get character from UART */ + ch = getch(); + + if(ch == STK_GET_PARAMETER) { + // GET PARAMETER returns a generic 0x03 reply - enough to keep Avrdude happy + getNch(1); + 7e4a: dd 24 eor r13, r13 + 7e4c: d3 94 inc r13 + boot_page_fill((uint16_t)(void*)addrPtr,a); + addrPtr += 2; + } while (--ch); + + // Write from programming buffer + boot_page_write((uint16_t)(void*)address); + 7e4e: a5 e0 ldi r26, 0x05 ; 5 + 7e50: ea 2e mov r14, r26 + boot_spm_busy_wait(); + +#if defined(RWWSRE) + // Reenable read access to flash + boot_rww_enable(); + 7e52: f1 e1 ldi r31, 0x11 ; 17 + 7e54: ff 2e mov r15, r31 +#endif + + /* Forever loop */ + for (;;) { + /* get character from UART */ + ch = getch(); + 7e56: a4 d0 rcall .+328 ; 0x7fa0 + + if(ch == STK_GET_PARAMETER) { + 7e58: 81 34 cpi r24, 0x41 ; 65 + 7e5a: 21 f4 brne .+8 ; 0x7e64 + // GET PARAMETER returns a generic 0x03 reply - enough to keep Avrdude happy + getNch(1); + 7e5c: 81 e0 ldi r24, 0x01 ; 1 + 7e5e: be d0 rcall .+380 ; 0x7fdc + putch(0x03); + 7e60: 83 e0 ldi r24, 0x03 ; 3 + 7e62: 24 c0 rjmp .+72 ; 0x7eac + } + else if(ch == STK_SET_DEVICE) { + 7e64: 82 34 cpi r24, 0x42 ; 66 + 7e66: 11 f4 brne .+4 ; 0x7e6c + // SET DEVICE is ignored + getNch(20); + 7e68: 84 e1 ldi r24, 0x14 ; 20 + 7e6a: 03 c0 rjmp .+6 ; 0x7e72 + } + else if(ch == STK_SET_DEVICE_EXT) { + 7e6c: 85 34 cpi r24, 0x45 ; 69 + 7e6e: 19 f4 brne .+6 ; 0x7e76 + // SET DEVICE EXT is ignored + getNch(5); + 7e70: 85 e0 ldi r24, 0x05 ; 5 + 7e72: b4 d0 rcall .+360 ; 0x7fdc + 7e74: 8a c0 rjmp .+276 ; 0x7f8a + } + else if(ch == STK_LOAD_ADDRESS) { + 7e76: 85 35 cpi r24, 0x55 ; 85 + 7e78: a1 f4 brne .+40 ; 0x7ea2 + // LOAD ADDRESS + address = getch(); + 7e7a: 92 d0 rcall .+292 ; 0x7fa0 + 7e7c: 08 2f mov r16, r24 + 7e7e: 10 e0 ldi r17, 0x00 ; 0 + 7e80: 10 93 01 02 sts 0x0201, r17 + 7e84: 00 93 00 02 sts 0x0200, r16 + address = (address & 0xff) | (getch() << 8); + 7e88: 8b d0 rcall .+278 ; 0x7fa0 + 7e8a: 90 e0 ldi r25, 0x00 ; 0 + 7e8c: 98 2f mov r25, r24 + 7e8e: 88 27 eor r24, r24 + 7e90: 80 2b or r24, r16 + 7e92: 91 2b or r25, r17 + address += address; // Convert from word address to byte address + 7e94: 88 0f add r24, r24 + 7e96: 99 1f adc r25, r25 + 7e98: 90 93 01 02 sts 0x0201, r25 + 7e9c: 80 93 00 02 sts 0x0200, r24 + 7ea0: 73 c0 rjmp .+230 ; 0x7f88 + verifySpace(); + } + else if(ch == STK_UNIVERSAL) { + 7ea2: 86 35 cpi r24, 0x56 ; 86 + 7ea4: 29 f4 brne .+10 ; 0x7eb0 + // UNIVERSAL command is ignored + getNch(4); + 7ea6: 84 e0 ldi r24, 0x04 ; 4 + 7ea8: 99 d0 rcall .+306 ; 0x7fdc + putch(0x00); + 7eaa: 80 e0 ldi r24, 0x00 ; 0 + 7eac: 71 d0 rcall .+226 ; 0x7f90 + 7eae: 6d c0 rjmp .+218 ; 0x7f8a + } + /* Write memory, length is big endian and is in bytes */ + else if(ch == STK_PROG_PAGE) { + 7eb0: 84 36 cpi r24, 0x64 ; 100 + 7eb2: 09 f0 breq .+2 ; 0x7eb6 + 7eb4: 43 c0 rjmp .+134 ; 0x7f3c + // PROGRAM PAGE - we support flash programming only, not EEPROM + uint8_t *bufPtr; + uint16_t addrPtr; + + getLen(); + 7eb6: 7c d0 rcall .+248 ; 0x7fb0 + + // Immediately start page erase - this will 4.5ms + boot_page_erase((uint16_t)(void*)address); + 7eb8: e0 91 00 02 lds r30, 0x0200 + 7ebc: f0 91 01 02 lds r31, 0x0201 + 7ec0: 83 e0 ldi r24, 0x03 ; 3 + 7ec2: 80 93 57 00 sts 0x0057, r24 + 7ec6: e8 95 spm + 7ec8: c0 e0 ldi r28, 0x00 ; 0 + 7eca: d1 e0 ldi r29, 0x01 ; 1 + + // While that is going on, read in page contents + bufPtr = buff; + do *bufPtr++ = getch(); + 7ecc: 69 d0 rcall .+210 ; 0x7fa0 + 7ece: 89 93 st Y+, r24 + while (--length); + 7ed0: 80 91 02 02 lds r24, 0x0202 + 7ed4: 81 50 subi r24, 0x01 ; 1 + 7ed6: 80 93 02 02 sts 0x0202, r24 + 7eda: 88 23 and r24, r24 + 7edc: b9 f7 brne .-18 ; 0x7ecc + + // Read command terminator, start reply + verifySpace(); + 7ede: 78 d0 rcall .+240 ; 0x7fd0 + + // If only a partial page is to be programmed, the erase might not be complete. + // So check that here + boot_spm_busy_wait(); + 7ee0: 07 b6 in r0, 0x37 ; 55 + 7ee2: 00 fc sbrc r0, 0 + 7ee4: fd cf rjmp .-6 ; 0x7ee0 + } +#endif + + // Copy buffer into programming buffer + bufPtr = buff; + addrPtr = (uint16_t)(void*)address; + 7ee6: 40 91 00 02 lds r20, 0x0200 + 7eea: 50 91 01 02 lds r21, 0x0201 + 7eee: a0 e0 ldi r26, 0x00 ; 0 + 7ef0: b1 e0 ldi r27, 0x01 ; 1 + ch = SPM_PAGESIZE / 2; + do { + uint16_t a; + a = *bufPtr++; + 7ef2: 2c 91 ld r18, X + 7ef4: 30 e0 ldi r19, 0x00 ; 0 + a |= (*bufPtr++) << 8; + 7ef6: 11 96 adiw r26, 0x01 ; 1 + 7ef8: 8c 91 ld r24, X + 7efa: 11 97 sbiw r26, 0x01 ; 1 + 7efc: 90 e0 ldi r25, 0x00 ; 0 + 7efe: 98 2f mov r25, r24 + 7f00: 88 27 eor r24, r24 + 7f02: 82 2b or r24, r18 + 7f04: 93 2b or r25, r19 +#ifdef VIRTUAL_BOOT_PARTITION +#define rstVect (*(uint16_t*)(0x204)) +#define wdtVect (*(uint16_t*)(0x206)) +#endif +/* main program starts here */ +int main(void) { + 7f06: 12 96 adiw r26, 0x02 ; 2 + ch = SPM_PAGESIZE / 2; + do { + uint16_t a; + a = *bufPtr++; + a |= (*bufPtr++) << 8; + boot_page_fill((uint16_t)(void*)addrPtr,a); + 7f08: fa 01 movw r30, r20 + 7f0a: 0c 01 movw r0, r24 + 7f0c: d0 92 57 00 sts 0x0057, r13 + 7f10: e8 95 spm + 7f12: 11 24 eor r1, r1 + addrPtr += 2; + 7f14: 4e 5f subi r20, 0xFE ; 254 + 7f16: 5f 4f sbci r21, 0xFF ; 255 + } while (--ch); + 7f18: f1 e0 ldi r31, 0x01 ; 1 + 7f1a: a0 38 cpi r26, 0x80 ; 128 + 7f1c: bf 07 cpc r27, r31 + 7f1e: 49 f7 brne .-46 ; 0x7ef2 + + // Write from programming buffer + boot_page_write((uint16_t)(void*)address); + 7f20: e0 91 00 02 lds r30, 0x0200 + 7f24: f0 91 01 02 lds r31, 0x0201 + 7f28: e0 92 57 00 sts 0x0057, r14 + 7f2c: e8 95 spm + boot_spm_busy_wait(); + 7f2e: 07 b6 in r0, 0x37 ; 55 + 7f30: 00 fc sbrc r0, 0 + 7f32: fd cf rjmp .-6 ; 0x7f2e + +#if defined(RWWSRE) + // Reenable read access to flash + boot_rww_enable(); + 7f34: f0 92 57 00 sts 0x0057, r15 + 7f38: e8 95 spm + 7f3a: 27 c0 rjmp .+78 ; 0x7f8a +#endif + + } + /* Read memory block mode, length is big endian. */ + else if(ch == STK_READ_PAGE) { + 7f3c: 84 37 cpi r24, 0x74 ; 116 + 7f3e: b9 f4 brne .+46 ; 0x7f6e + // READ PAGE - we only read flash + getLen(); + 7f40: 37 d0 rcall .+110 ; 0x7fb0 + verifySpace(); + 7f42: 46 d0 rcall .+140 ; 0x7fd0 + else ch = pgm_read_byte_near(address); + address++; + putch(ch); + } while (--length); +#else + do putch(pgm_read_byte_near(address++)); + 7f44: e0 91 00 02 lds r30, 0x0200 + 7f48: f0 91 01 02 lds r31, 0x0201 + 7f4c: 31 96 adiw r30, 0x01 ; 1 + 7f4e: f0 93 01 02 sts 0x0201, r31 + 7f52: e0 93 00 02 sts 0x0200, r30 + 7f56: 31 97 sbiw r30, 0x01 ; 1 + 7f58: e4 91 lpm r30, Z+ + 7f5a: 8e 2f mov r24, r30 + 7f5c: 19 d0 rcall .+50 ; 0x7f90 + while (--length); + 7f5e: 80 91 02 02 lds r24, 0x0202 + 7f62: 81 50 subi r24, 0x01 ; 1 + 7f64: 80 93 02 02 sts 0x0202, r24 + 7f68: 88 23 and r24, r24 + 7f6a: 61 f7 brne .-40 ; 0x7f44 + 7f6c: 0e c0 rjmp .+28 ; 0x7f8a +#endif + } + + /* Get device signature bytes */ + else if(ch == STK_READ_SIGN) { + 7f6e: 85 37 cpi r24, 0x75 ; 117 + 7f70: 39 f4 brne .+14 ; 0x7f80 + // READ SIGN - return what Avrdude wants to hear + verifySpace(); + 7f72: 2e d0 rcall .+92 ; 0x7fd0 + putch(SIGNATURE_0); + 7f74: 8e e1 ldi r24, 0x1E ; 30 + 7f76: 0c d0 rcall .+24 ; 0x7f90 + putch(SIGNATURE_1); + 7f78: 85 e9 ldi r24, 0x95 ; 149 + 7f7a: 0a d0 rcall .+20 ; 0x7f90 + putch(SIGNATURE_2); + 7f7c: 8f e0 ldi r24, 0x0F ; 15 + 7f7e: 96 cf rjmp .-212 ; 0x7eac + } + else if (ch == 'Q') { + 7f80: 81 35 cpi r24, 0x51 ; 81 + 7f82: 11 f4 brne .+4 ; 0x7f88 + // Adaboot no-wait mod + watchdogConfig(WATCHDOG_16MS); + 7f84: 88 e0 ldi r24, 0x08 ; 8 + 7f86: 19 d0 rcall .+50 ; 0x7fba + verifySpace(); + } + else { + // This covers the response to commands like STK_ENTER_PROGMODE + verifySpace(); + 7f88: 23 d0 rcall .+70 ; 0x7fd0 + } + putch(STK_OK); + 7f8a: 80 e1 ldi r24, 0x10 ; 16 + 7f8c: 01 d0 rcall .+2 ; 0x7f90 + 7f8e: 63 cf rjmp .-314 ; 0x7e56 + +00007f90 : + } +} + +void putch(char ch) { + 7f90: 98 2f mov r25, r24 +#ifndef SOFT_UART + while (!(UCSR0A & _BV(UDRE0))); + 7f92: 80 91 c0 00 lds r24, 0x00C0 + 7f96: 85 ff sbrs r24, 5 + 7f98: fc cf rjmp .-8 ; 0x7f92 + UDR0 = ch; + 7f9a: 90 93 c6 00 sts 0x00C6, r25 + [uartBit] "I" (UART_TX_BIT) + : + "r25" + ); +#endif +} + 7f9e: 08 95 ret + +00007fa0 : + return getch(); +} + +// Watchdog functions. These are only safe with interrupts turned off. +void watchdogReset() { + __asm__ __volatile__ ( + 7fa0: a8 95 wdr + [uartBit] "I" (UART_RX_BIT) + : + "r25" +); +#else + while(!(UCSR0A & _BV(RXC0))); + 7fa2: 80 91 c0 00 lds r24, 0x00C0 + 7fa6: 87 ff sbrs r24, 7 + 7fa8: fc cf rjmp .-8 ; 0x7fa2 + ch = UDR0; + 7faa: 80 91 c6 00 lds r24, 0x00C6 +#ifdef LED_DATA_FLASH + LED_PIN |= _BV(LED); +#endif + + return ch; +} + 7fae: 08 95 ret + +00007fb0 : + } while (--count); +} +#endif + +uint8_t getLen() { + getch(); + 7fb0: f7 df rcall .-18 ; 0x7fa0 + length = getch(); + 7fb2: f6 df rcall .-20 ; 0x7fa0 + 7fb4: 80 93 02 02 sts 0x0202, r24 + return getch(); +} + 7fb8: f3 cf rjmp .-26 ; 0x7fa0 + +00007fba : + "wdr\n" + ); +} + +void watchdogConfig(uint8_t x) { + WDTCSR = _BV(WDCE) | _BV(WDE); + 7fba: e0 e6 ldi r30, 0x60 ; 96 + 7fbc: f0 e0 ldi r31, 0x00 ; 0 + 7fbe: 98 e1 ldi r25, 0x18 ; 24 + 7fc0: 90 83 st Z, r25 + WDTCSR = x; + 7fc2: 80 83 st Z, r24 +} + 7fc4: 08 95 ret + +00007fc6 : + +void appStart() { + watchdogConfig(WATCHDOG_OFF); + 7fc6: 80 e0 ldi r24, 0x00 ; 0 + 7fc8: f8 df rcall .-16 ; 0x7fba + __asm__ __volatile__ ( + 7fca: ee 27 eor r30, r30 + 7fcc: ff 27 eor r31, r31 + 7fce: 09 94 ijmp + +00007fd0 : + do getch(); while (--count); + verifySpace(); +} + +void verifySpace() { + if (getch() != CRC_EOP) appStart(); + 7fd0: e7 df rcall .-50 ; 0x7fa0 + 7fd2: 80 32 cpi r24, 0x20 ; 32 + 7fd4: 09 f0 breq .+2 ; 0x7fd8 + 7fd6: f7 df rcall .-18 ; 0x7fc6 + putch(STK_INSYNC); + 7fd8: 84 e1 ldi r24, 0x14 ; 20 +} + 7fda: da cf rjmp .-76 ; 0x7f90 + ::[count] "M" (UART_B_VALUE) + ); +} +#endif + +void getNch(uint8_t count) { + 7fdc: 1f 93 push r17 + 7fde: 18 2f mov r17, r24 + +00007fe0 : + do getch(); while (--count); + 7fe0: df df rcall .-66 ; 0x7fa0 + 7fe2: 11 50 subi r17, 0x01 ; 1 + 7fe4: e9 f7 brne .-6 ; 0x7fe0 + verifySpace(); + 7fe6: f4 df rcall .-24 ; 0x7fd0 +} + 7fe8: 1f 91 pop r17 + 7fea: 08 95 ret diff --git a/test/ardmake/hardware/bootloaders/optiboot/optiboot_atmega328_pro_8MHz.hex b/test/ardmake/hardware/bootloaders/optiboot/optiboot_atmega328_pro_8MHz.hex new file mode 100644 index 0000000..d6ac145 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/optiboot/optiboot_atmega328_pro_8MHz.hex @@ -0,0 +1,33 @@ +:107E000085E08093810082E08093C00088E18093C8 +:107E1000C10086E08093C20088E08093C40084B7EC +:107E200014BE81FFD0D08DE0C8D0259A86E028E12D +:107E30003EEF91E0309385002093840096BBB09B89 +:107E4000FECF1D9AA8958150A9F7DD24D394A5E013 +:107E5000EA2EF1E1FF2EA4D0813421F481E0BED0DE +:107E600083E024C0823411F484E103C0853419F422 +:107E700085E0B4D08AC08535A1F492D0082F10E0F7 +:107E800010930102009300028BD090E0982F882776 +:107E9000802B912B880F991F9093010280930002F1 +:107EA00073C0863529F484E099D080E071D06DC02C +:107EB000843609F043C07CD0E0910002F0910102C9 +:107EC00083E080935700E895C0E0D1E069D08993C2 +:107ED000809102028150809302028823B9F778D002 +:107EE00007B600FCFDCF4091000250910102A0E0D6 +:107EF000B1E02C9130E011968C91119790E0982F81 +:107F00008827822B932B1296FA010C01D0925700EE +:107F1000E89511244E5F5F4FF1E0A038BF0749F7A5 +:107F2000E0910002F0910102E0925700E89507B657 +:107F300000FCFDCFF0925700E89527C08437B9F4D4 +:107F400037D046D0E0910002F09101023196F093D3 +:107F50000102E09300023197E4918E2F19D08091B5 +:107F60000202815080930202882361F70EC0853798 +:107F700039F42ED08EE10CD085E90AD08FE096CF6F +:107F8000813511F488E019D023D080E101D063CF8E +:107F9000982F8091C00085FFFCCF9093C600089574 +:107FA000A8958091C00087FFFCCF8091C6000895FE +:107FB000F7DFF6DF80930202F3CFE0E6F0E098E12E +:107FC00090838083089580E0F8DFEE27FF270994EF +:107FD000E7DF803209F0F7DF84E1DACF1F93182F53 +:0C7FE000DFDF1150E9F7F4DF1F91089576 +:0400000300007E007B +:00000001FF diff --git a/test/ardmake/hardware/bootloaders/optiboot/optiboot_atmega328_pro_8MHz.lst b/test/ardmake/hardware/bootloaders/optiboot/optiboot_atmega328_pro_8MHz.lst new file mode 100644 index 0000000..46eda68 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/optiboot/optiboot_atmega328_pro_8MHz.lst @@ -0,0 +1,520 @@ + +optiboot_atmega328_pro_8MHz.elf: file format elf32-avr + +Sections: +Idx Name Size VMA LMA File off Algn + 0 .text 000001ec 00007e00 00007e00 00000054 2**1 + CONTENTS, ALLOC, LOAD, READONLY, CODE + 1 .debug_aranges 00000028 00000000 00000000 00000240 2**0 + CONTENTS, READONLY, DEBUGGING + 2 .debug_pubnames 0000006a 00000000 00000000 00000268 2**0 + CONTENTS, READONLY, DEBUGGING + 3 .debug_info 00000269 00000000 00000000 000002d2 2**0 + CONTENTS, READONLY, DEBUGGING + 4 .debug_abbrev 00000196 00000000 00000000 0000053b 2**0 + CONTENTS, READONLY, DEBUGGING + 5 .debug_line 000003d3 00000000 00000000 000006d1 2**0 + CONTENTS, READONLY, DEBUGGING + 6 .debug_frame 00000090 00000000 00000000 00000aa4 2**2 + CONTENTS, READONLY, DEBUGGING + 7 .debug_str 00000135 00000000 00000000 00000b34 2**0 + CONTENTS, READONLY, DEBUGGING + 8 .debug_loc 000001d1 00000000 00000000 00000c69 2**0 + CONTENTS, READONLY, DEBUGGING + 9 .debug_ranges 00000068 00000000 00000000 00000e3a 2**0 + CONTENTS, READONLY, DEBUGGING + +Disassembly of section .text: + +00007e00
: +#ifdef VIRTUAL_BOOT_PARTITION +#define rstVect (*(uint16_t*)(0x204)) +#define wdtVect (*(uint16_t*)(0x206)) +#endif +/* main program starts here */ +int main(void) { + 7e00: 85 e0 ldi r24, 0x05 ; 5 + 7e02: 80 93 81 00 sts 0x0081, r24 +#if LED_START_FLASHES > 0 + // Set up Timer 1 for timeout counter + TCCR1B = _BV(CS12) | _BV(CS10); // div 1024 +#endif +#ifndef SOFT_UART + UCSR0A = _BV(U2X0); //Double speed mode USART0 + 7e06: 82 e0 ldi r24, 0x02 ; 2 + 7e08: 80 93 c0 00 sts 0x00C0, r24 + UCSR0B = _BV(RXEN0) | _BV(TXEN0); + 7e0c: 88 e1 ldi r24, 0x18 ; 24 + 7e0e: 80 93 c1 00 sts 0x00C1, r24 + UCSR0C = _BV(UCSZ00) | _BV(UCSZ01); + 7e12: 86 e0 ldi r24, 0x06 ; 6 + 7e14: 80 93 c2 00 sts 0x00C2, r24 + UBRR0L = (uint8_t)( (F_CPU + BAUD_RATE * 4L) / (BAUD_RATE * 8L) - 1 ); + 7e18: 88 e0 ldi r24, 0x08 ; 8 + 7e1a: 80 93 c4 00 sts 0x00C4, r24 +#endif + + // Adaboot no-wait mod + ch = MCUSR; + 7e1e: 84 b7 in r24, 0x34 ; 52 + MCUSR = 0; + 7e20: 14 be out 0x34, r1 ; 52 + if (!(ch & _BV(EXTRF))) appStart(); + 7e22: 81 ff sbrs r24, 1 + 7e24: d0 d0 rcall .+416 ; 0x7fc6 + + // Set up watchdog to trigger after 500ms + watchdogConfig(WATCHDOG_500MS); + 7e26: 8d e0 ldi r24, 0x0D ; 13 + 7e28: c8 d0 rcall .+400 ; 0x7fba + + /* Set LED pin as output */ + LED_DDR |= _BV(LED); + 7e2a: 25 9a sbi 0x04, 5 ; 4 + 7e2c: 86 e0 ldi r24, 0x06 ; 6 +} + +#if LED_START_FLASHES > 0 +void flash_led(uint8_t count) { + do { + TCNT1 = -(F_CPU/(1024*16)); + 7e2e: 28 e1 ldi r18, 0x18 ; 24 + 7e30: 3e ef ldi r19, 0xFE ; 254 + TIFR1 = _BV(TOV1); + 7e32: 91 e0 ldi r25, 0x01 ; 1 +} + +#if LED_START_FLASHES > 0 +void flash_led(uint8_t count) { + do { + TCNT1 = -(F_CPU/(1024*16)); + 7e34: 30 93 85 00 sts 0x0085, r19 + 7e38: 20 93 84 00 sts 0x0084, r18 + TIFR1 = _BV(TOV1); + 7e3c: 96 bb out 0x16, r25 ; 22 + while(!(TIFR1 & _BV(TOV1))); + 7e3e: b0 9b sbis 0x16, 0 ; 22 + 7e40: fe cf rjmp .-4 ; 0x7e3e + LED_PIN |= _BV(LED); + 7e42: 1d 9a sbi 0x03, 5 ; 3 + return getch(); +} + +// Watchdog functions. These are only safe with interrupts turned off. +void watchdogReset() { + __asm__ __volatile__ ( + 7e44: a8 95 wdr + TCNT1 = -(F_CPU/(1024*16)); + TIFR1 = _BV(TOV1); + while(!(TIFR1 & _BV(TOV1))); + LED_PIN |= _BV(LED); + watchdogReset(); + } while (--count); + 7e46: 81 50 subi r24, 0x01 ; 1 + 7e48: a9 f7 brne .-22 ; 0x7e34 + /* get character from UART */ + ch = getch(); + + if(ch == STK_GET_PARAMETER) { + // GET PARAMETER returns a generic 0x03 reply - enough to keep Avrdude happy + getNch(1); + 7e4a: dd 24 eor r13, r13 + 7e4c: d3 94 inc r13 + boot_page_fill((uint16_t)(void*)addrPtr,a); + addrPtr += 2; + } while (--ch); + + // Write from programming buffer + boot_page_write((uint16_t)(void*)address); + 7e4e: a5 e0 ldi r26, 0x05 ; 5 + 7e50: ea 2e mov r14, r26 + boot_spm_busy_wait(); + +#if defined(RWWSRE) + // Reenable read access to flash + boot_rww_enable(); + 7e52: f1 e1 ldi r31, 0x11 ; 17 + 7e54: ff 2e mov r15, r31 +#endif + + /* Forever loop */ + for (;;) { + /* get character from UART */ + ch = getch(); + 7e56: a4 d0 rcall .+328 ; 0x7fa0 + + if(ch == STK_GET_PARAMETER) { + 7e58: 81 34 cpi r24, 0x41 ; 65 + 7e5a: 21 f4 brne .+8 ; 0x7e64 + // GET PARAMETER returns a generic 0x03 reply - enough to keep Avrdude happy + getNch(1); + 7e5c: 81 e0 ldi r24, 0x01 ; 1 + 7e5e: be d0 rcall .+380 ; 0x7fdc + putch(0x03); + 7e60: 83 e0 ldi r24, 0x03 ; 3 + 7e62: 24 c0 rjmp .+72 ; 0x7eac + } + else if(ch == STK_SET_DEVICE) { + 7e64: 82 34 cpi r24, 0x42 ; 66 + 7e66: 11 f4 brne .+4 ; 0x7e6c + // SET DEVICE is ignored + getNch(20); + 7e68: 84 e1 ldi r24, 0x14 ; 20 + 7e6a: 03 c0 rjmp .+6 ; 0x7e72 + } + else if(ch == STK_SET_DEVICE_EXT) { + 7e6c: 85 34 cpi r24, 0x45 ; 69 + 7e6e: 19 f4 brne .+6 ; 0x7e76 + // SET DEVICE EXT is ignored + getNch(5); + 7e70: 85 e0 ldi r24, 0x05 ; 5 + 7e72: b4 d0 rcall .+360 ; 0x7fdc + 7e74: 8a c0 rjmp .+276 ; 0x7f8a + } + else if(ch == STK_LOAD_ADDRESS) { + 7e76: 85 35 cpi r24, 0x55 ; 85 + 7e78: a1 f4 brne .+40 ; 0x7ea2 + // LOAD ADDRESS + address = getch(); + 7e7a: 92 d0 rcall .+292 ; 0x7fa0 + 7e7c: 08 2f mov r16, r24 + 7e7e: 10 e0 ldi r17, 0x00 ; 0 + 7e80: 10 93 01 02 sts 0x0201, r17 + 7e84: 00 93 00 02 sts 0x0200, r16 + address = (address & 0xff) | (getch() << 8); + 7e88: 8b d0 rcall .+278 ; 0x7fa0 + 7e8a: 90 e0 ldi r25, 0x00 ; 0 + 7e8c: 98 2f mov r25, r24 + 7e8e: 88 27 eor r24, r24 + 7e90: 80 2b or r24, r16 + 7e92: 91 2b or r25, r17 + address += address; // Convert from word address to byte address + 7e94: 88 0f add r24, r24 + 7e96: 99 1f adc r25, r25 + 7e98: 90 93 01 02 sts 0x0201, r25 + 7e9c: 80 93 00 02 sts 0x0200, r24 + 7ea0: 73 c0 rjmp .+230 ; 0x7f88 + verifySpace(); + } + else if(ch == STK_UNIVERSAL) { + 7ea2: 86 35 cpi r24, 0x56 ; 86 + 7ea4: 29 f4 brne .+10 ; 0x7eb0 + // UNIVERSAL command is ignored + getNch(4); + 7ea6: 84 e0 ldi r24, 0x04 ; 4 + 7ea8: 99 d0 rcall .+306 ; 0x7fdc + putch(0x00); + 7eaa: 80 e0 ldi r24, 0x00 ; 0 + 7eac: 71 d0 rcall .+226 ; 0x7f90 + 7eae: 6d c0 rjmp .+218 ; 0x7f8a + } + /* Write memory, length is big endian and is in bytes */ + else if(ch == STK_PROG_PAGE) { + 7eb0: 84 36 cpi r24, 0x64 ; 100 + 7eb2: 09 f0 breq .+2 ; 0x7eb6 + 7eb4: 43 c0 rjmp .+134 ; 0x7f3c + // PROGRAM PAGE - we support flash programming only, not EEPROM + uint8_t *bufPtr; + uint16_t addrPtr; + + getLen(); + 7eb6: 7c d0 rcall .+248 ; 0x7fb0 + + // Immediately start page erase - this will 4.5ms + boot_page_erase((uint16_t)(void*)address); + 7eb8: e0 91 00 02 lds r30, 0x0200 + 7ebc: f0 91 01 02 lds r31, 0x0201 + 7ec0: 83 e0 ldi r24, 0x03 ; 3 + 7ec2: 80 93 57 00 sts 0x0057, r24 + 7ec6: e8 95 spm + 7ec8: c0 e0 ldi r28, 0x00 ; 0 + 7eca: d1 e0 ldi r29, 0x01 ; 1 + + // While that is going on, read in page contents + bufPtr = buff; + do *bufPtr++ = getch(); + 7ecc: 69 d0 rcall .+210 ; 0x7fa0 + 7ece: 89 93 st Y+, r24 + while (--length); + 7ed0: 80 91 02 02 lds r24, 0x0202 + 7ed4: 81 50 subi r24, 0x01 ; 1 + 7ed6: 80 93 02 02 sts 0x0202, r24 + 7eda: 88 23 and r24, r24 + 7edc: b9 f7 brne .-18 ; 0x7ecc + + // Read command terminator, start reply + verifySpace(); + 7ede: 78 d0 rcall .+240 ; 0x7fd0 + + // If only a partial page is to be programmed, the erase might not be complete. + // So check that here + boot_spm_busy_wait(); + 7ee0: 07 b6 in r0, 0x37 ; 55 + 7ee2: 00 fc sbrc r0, 0 + 7ee4: fd cf rjmp .-6 ; 0x7ee0 + } +#endif + + // Copy buffer into programming buffer + bufPtr = buff; + addrPtr = (uint16_t)(void*)address; + 7ee6: 40 91 00 02 lds r20, 0x0200 + 7eea: 50 91 01 02 lds r21, 0x0201 + 7eee: a0 e0 ldi r26, 0x00 ; 0 + 7ef0: b1 e0 ldi r27, 0x01 ; 1 + ch = SPM_PAGESIZE / 2; + do { + uint16_t a; + a = *bufPtr++; + 7ef2: 2c 91 ld r18, X + 7ef4: 30 e0 ldi r19, 0x00 ; 0 + a |= (*bufPtr++) << 8; + 7ef6: 11 96 adiw r26, 0x01 ; 1 + 7ef8: 8c 91 ld r24, X + 7efa: 11 97 sbiw r26, 0x01 ; 1 + 7efc: 90 e0 ldi r25, 0x00 ; 0 + 7efe: 98 2f mov r25, r24 + 7f00: 88 27 eor r24, r24 + 7f02: 82 2b or r24, r18 + 7f04: 93 2b or r25, r19 +#ifdef VIRTUAL_BOOT_PARTITION +#define rstVect (*(uint16_t*)(0x204)) +#define wdtVect (*(uint16_t*)(0x206)) +#endif +/* main program starts here */ +int main(void) { + 7f06: 12 96 adiw r26, 0x02 ; 2 + ch = SPM_PAGESIZE / 2; + do { + uint16_t a; + a = *bufPtr++; + a |= (*bufPtr++) << 8; + boot_page_fill((uint16_t)(void*)addrPtr,a); + 7f08: fa 01 movw r30, r20 + 7f0a: 0c 01 movw r0, r24 + 7f0c: d0 92 57 00 sts 0x0057, r13 + 7f10: e8 95 spm + 7f12: 11 24 eor r1, r1 + addrPtr += 2; + 7f14: 4e 5f subi r20, 0xFE ; 254 + 7f16: 5f 4f sbci r21, 0xFF ; 255 + } while (--ch); + 7f18: f1 e0 ldi r31, 0x01 ; 1 + 7f1a: a0 38 cpi r26, 0x80 ; 128 + 7f1c: bf 07 cpc r27, r31 + 7f1e: 49 f7 brne .-46 ; 0x7ef2 + + // Write from programming buffer + boot_page_write((uint16_t)(void*)address); + 7f20: e0 91 00 02 lds r30, 0x0200 + 7f24: f0 91 01 02 lds r31, 0x0201 + 7f28: e0 92 57 00 sts 0x0057, r14 + 7f2c: e8 95 spm + boot_spm_busy_wait(); + 7f2e: 07 b6 in r0, 0x37 ; 55 + 7f30: 00 fc sbrc r0, 0 + 7f32: fd cf rjmp .-6 ; 0x7f2e + +#if defined(RWWSRE) + // Reenable read access to flash + boot_rww_enable(); + 7f34: f0 92 57 00 sts 0x0057, r15 + 7f38: e8 95 spm + 7f3a: 27 c0 rjmp .+78 ; 0x7f8a +#endif + + } + /* Read memory block mode, length is big endian. */ + else if(ch == STK_READ_PAGE) { + 7f3c: 84 37 cpi r24, 0x74 ; 116 + 7f3e: b9 f4 brne .+46 ; 0x7f6e + // READ PAGE - we only read flash + getLen(); + 7f40: 37 d0 rcall .+110 ; 0x7fb0 + verifySpace(); + 7f42: 46 d0 rcall .+140 ; 0x7fd0 + else ch = pgm_read_byte_near(address); + address++; + putch(ch); + } while (--length); +#else + do putch(pgm_read_byte_near(address++)); + 7f44: e0 91 00 02 lds r30, 0x0200 + 7f48: f0 91 01 02 lds r31, 0x0201 + 7f4c: 31 96 adiw r30, 0x01 ; 1 + 7f4e: f0 93 01 02 sts 0x0201, r31 + 7f52: e0 93 00 02 sts 0x0200, r30 + 7f56: 31 97 sbiw r30, 0x01 ; 1 + 7f58: e4 91 lpm r30, Z+ + 7f5a: 8e 2f mov r24, r30 + 7f5c: 19 d0 rcall .+50 ; 0x7f90 + while (--length); + 7f5e: 80 91 02 02 lds r24, 0x0202 + 7f62: 81 50 subi r24, 0x01 ; 1 + 7f64: 80 93 02 02 sts 0x0202, r24 + 7f68: 88 23 and r24, r24 + 7f6a: 61 f7 brne .-40 ; 0x7f44 + 7f6c: 0e c0 rjmp .+28 ; 0x7f8a +#endif + } + + /* Get device signature bytes */ + else if(ch == STK_READ_SIGN) { + 7f6e: 85 37 cpi r24, 0x75 ; 117 + 7f70: 39 f4 brne .+14 ; 0x7f80 + // READ SIGN - return what Avrdude wants to hear + verifySpace(); + 7f72: 2e d0 rcall .+92 ; 0x7fd0 + putch(SIGNATURE_0); + 7f74: 8e e1 ldi r24, 0x1E ; 30 + 7f76: 0c d0 rcall .+24 ; 0x7f90 + putch(SIGNATURE_1); + 7f78: 85 e9 ldi r24, 0x95 ; 149 + 7f7a: 0a d0 rcall .+20 ; 0x7f90 + putch(SIGNATURE_2); + 7f7c: 8f e0 ldi r24, 0x0F ; 15 + 7f7e: 96 cf rjmp .-212 ; 0x7eac + } + else if (ch == 'Q') { + 7f80: 81 35 cpi r24, 0x51 ; 81 + 7f82: 11 f4 brne .+4 ; 0x7f88 + // Adaboot no-wait mod + watchdogConfig(WATCHDOG_16MS); + 7f84: 88 e0 ldi r24, 0x08 ; 8 + 7f86: 19 d0 rcall .+50 ; 0x7fba + verifySpace(); + } + else { + // This covers the response to commands like STK_ENTER_PROGMODE + verifySpace(); + 7f88: 23 d0 rcall .+70 ; 0x7fd0 + } + putch(STK_OK); + 7f8a: 80 e1 ldi r24, 0x10 ; 16 + 7f8c: 01 d0 rcall .+2 ; 0x7f90 + 7f8e: 63 cf rjmp .-314 ; 0x7e56 + +00007f90 : + } +} + +void putch(char ch) { + 7f90: 98 2f mov r25, r24 +#ifndef SOFT_UART + while (!(UCSR0A & _BV(UDRE0))); + 7f92: 80 91 c0 00 lds r24, 0x00C0 + 7f96: 85 ff sbrs r24, 5 + 7f98: fc cf rjmp .-8 ; 0x7f92 + UDR0 = ch; + 7f9a: 90 93 c6 00 sts 0x00C6, r25 + [uartBit] "I" (UART_TX_BIT) + : + "r25" + ); +#endif +} + 7f9e: 08 95 ret + +00007fa0 : + return getch(); +} + +// Watchdog functions. These are only safe with interrupts turned off. +void watchdogReset() { + __asm__ __volatile__ ( + 7fa0: a8 95 wdr + [uartBit] "I" (UART_RX_BIT) + : + "r25" +); +#else + while(!(UCSR0A & _BV(RXC0))); + 7fa2: 80 91 c0 00 lds r24, 0x00C0 + 7fa6: 87 ff sbrs r24, 7 + 7fa8: fc cf rjmp .-8 ; 0x7fa2 + ch = UDR0; + 7faa: 80 91 c6 00 lds r24, 0x00C6 +#ifdef LED_DATA_FLASH + LED_PIN |= _BV(LED); +#endif + + return ch; +} + 7fae: 08 95 ret + +00007fb0 : + } while (--count); +} +#endif + +uint8_t getLen() { + getch(); + 7fb0: f7 df rcall .-18 ; 0x7fa0 + length = getch(); + 7fb2: f6 df rcall .-20 ; 0x7fa0 + 7fb4: 80 93 02 02 sts 0x0202, r24 + return getch(); +} + 7fb8: f3 cf rjmp .-26 ; 0x7fa0 + +00007fba : + "wdr\n" + ); +} + +void watchdogConfig(uint8_t x) { + WDTCSR = _BV(WDCE) | _BV(WDE); + 7fba: e0 e6 ldi r30, 0x60 ; 96 + 7fbc: f0 e0 ldi r31, 0x00 ; 0 + 7fbe: 98 e1 ldi r25, 0x18 ; 24 + 7fc0: 90 83 st Z, r25 + WDTCSR = x; + 7fc2: 80 83 st Z, r24 +} + 7fc4: 08 95 ret + +00007fc6 : + +void appStart() { + watchdogConfig(WATCHDOG_OFF); + 7fc6: 80 e0 ldi r24, 0x00 ; 0 + 7fc8: f8 df rcall .-16 ; 0x7fba + __asm__ __volatile__ ( + 7fca: ee 27 eor r30, r30 + 7fcc: ff 27 eor r31, r31 + 7fce: 09 94 ijmp + +00007fd0 : + do getch(); while (--count); + verifySpace(); +} + +void verifySpace() { + if (getch() != CRC_EOP) appStart(); + 7fd0: e7 df rcall .-50 ; 0x7fa0 + 7fd2: 80 32 cpi r24, 0x20 ; 32 + 7fd4: 09 f0 breq .+2 ; 0x7fd8 + 7fd6: f7 df rcall .-18 ; 0x7fc6 + putch(STK_INSYNC); + 7fd8: 84 e1 ldi r24, 0x14 ; 20 +} + 7fda: da cf rjmp .-76 ; 0x7f90 + ::[count] "M" (UART_B_VALUE) + ); +} +#endif + +void getNch(uint8_t count) { + 7fdc: 1f 93 push r17 + 7fde: 18 2f mov r17, r24 + +00007fe0 : + do getch(); while (--count); + 7fe0: df df rcall .-66 ; 0x7fa0 + 7fe2: 11 50 subi r17, 0x01 ; 1 + 7fe4: e9 f7 brne .-6 ; 0x7fe0 + verifySpace(); + 7fe6: f4 df rcall .-24 ; 0x7fd0 +} + 7fe8: 1f 91 pop r17 + 7fea: 08 95 ret diff --git a/test/ardmake/hardware/bootloaders/optiboot/optiboot_diecimila.hex b/test/ardmake/hardware/bootloaders/optiboot/optiboot_diecimila.hex new file mode 100644 index 0000000..1e93414 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/optiboot/optiboot_diecimila.hex @@ -0,0 +1,33 @@ +:103E000085E08093810082E08093C00088E1809308 +:103E1000C10086E08093C20080E18093C40084B733 +:103E200014BE81FFD0D08DE0C8D0259A86E020E373 +:103E30003CEF91E0309385002093840096BBB09BCB +:103E4000FECF1D9AA8958150A9F7DD24D394A5E053 +:103E5000EA2EF1E1FF2EA4D0813421F481E0BED01E +:103E600083E024C0823411F484E103C0853419F462 +:103E700085E0B4D08AC08535A1F492D0082F10E037 +:103E800010930102009300028BD090E0982F8827B6 +:103E9000802B912B880F991F909301028093000231 +:103EA00073C0863529F484E099D080E071D06DC06C +:103EB000843609F043C07CD0E0910002F091010209 +:103EC00083E080935700E895C0E0D1E069D0899302 +:103ED000809102028150809302028823B9F778D042 +:103EE00007B600FCFDCF4091000250910102A0E016 +:103EF000B1E02C9130E011968C91119790E0982FC1 +:103F00008827822B932B1296FA010C01D09257002E +:103F1000E89511244E5F5F4FF1E0A038BF0749F7E5 +:103F2000E0910002F0910102E0925700E89507B697 +:103F300000FCFDCFF0925700E89527C08437B9F414 +:103F400037D046D0E0910002F09101023196F09313 +:103F50000102E09300023197E4918E2F19D08091F5 +:103F60000202815080930202882361F70EC08537D8 +:103F700039F42ED08EE10CD084E90AD086E096CFB9 +:103F8000813511F488E019D023D080E101D063CFCE +:103F9000982F8091C00085FFFCCF9093C6000895B4 +:103FA000A8958091C00087FFFCCF8091C60008953E +:103FB000F7DFF6DF80930202F3CFE0E6F0E098E16E +:103FC00090838083089580E0F8DFEE27FF2709942F +:103FD000E7DF803209F0F7DF84E1DACF1F93182F93 +:0C3FE000DFDF1150E9F7F4DF1F910895B6 +:0400000300003E00BB +:00000001FF diff --git a/test/ardmake/hardware/bootloaders/optiboot/optiboot_diecimila.lst b/test/ardmake/hardware/bootloaders/optiboot/optiboot_diecimila.lst new file mode 100644 index 0000000..1121893 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/optiboot/optiboot_diecimila.lst @@ -0,0 +1,520 @@ + +optiboot_diecimila.elf: file format elf32-avr + +Sections: +Idx Name Size VMA LMA File off Algn + 0 .text 000001ec 00003e00 00003e00 00000054 2**1 + CONTENTS, ALLOC, LOAD, READONLY, CODE + 1 .debug_aranges 00000028 00000000 00000000 00000240 2**0 + CONTENTS, READONLY, DEBUGGING + 2 .debug_pubnames 0000006a 00000000 00000000 00000268 2**0 + CONTENTS, READONLY, DEBUGGING + 3 .debug_info 00000269 00000000 00000000 000002d2 2**0 + CONTENTS, READONLY, DEBUGGING + 4 .debug_abbrev 00000196 00000000 00000000 0000053b 2**0 + CONTENTS, READONLY, DEBUGGING + 5 .debug_line 000003d3 00000000 00000000 000006d1 2**0 + CONTENTS, READONLY, DEBUGGING + 6 .debug_frame 00000090 00000000 00000000 00000aa4 2**2 + CONTENTS, READONLY, DEBUGGING + 7 .debug_str 00000135 00000000 00000000 00000b34 2**0 + CONTENTS, READONLY, DEBUGGING + 8 .debug_loc 000001d1 00000000 00000000 00000c69 2**0 + CONTENTS, READONLY, DEBUGGING + 9 .debug_ranges 00000068 00000000 00000000 00000e3a 2**0 + CONTENTS, READONLY, DEBUGGING + +Disassembly of section .text: + +00003e00
: +#ifdef VIRTUAL_BOOT_PARTITION +#define rstVect (*(uint16_t*)(0x204)) +#define wdtVect (*(uint16_t*)(0x206)) +#endif +/* main program starts here */ +int main(void) { + 3e00: 85 e0 ldi r24, 0x05 ; 5 + 3e02: 80 93 81 00 sts 0x0081, r24 +#if LED_START_FLASHES > 0 + // Set up Timer 1 for timeout counter + TCCR1B = _BV(CS12) | _BV(CS10); // div 1024 +#endif +#ifndef SOFT_UART + UCSR0A = _BV(U2X0); //Double speed mode USART0 + 3e06: 82 e0 ldi r24, 0x02 ; 2 + 3e08: 80 93 c0 00 sts 0x00C0, r24 + UCSR0B = _BV(RXEN0) | _BV(TXEN0); + 3e0c: 88 e1 ldi r24, 0x18 ; 24 + 3e0e: 80 93 c1 00 sts 0x00C1, r24 + UCSR0C = _BV(UCSZ00) | _BV(UCSZ01); + 3e12: 86 e0 ldi r24, 0x06 ; 6 + 3e14: 80 93 c2 00 sts 0x00C2, r24 + UBRR0L = (uint8_t)( (F_CPU + BAUD_RATE * 4L) / (BAUD_RATE * 8L) - 1 ); + 3e18: 80 e1 ldi r24, 0x10 ; 16 + 3e1a: 80 93 c4 00 sts 0x00C4, r24 +#endif + + // Adaboot no-wait mod + ch = MCUSR; + 3e1e: 84 b7 in r24, 0x34 ; 52 + MCUSR = 0; + 3e20: 14 be out 0x34, r1 ; 52 + if (!(ch & _BV(EXTRF))) appStart(); + 3e22: 81 ff sbrs r24, 1 + 3e24: d0 d0 rcall .+416 ; 0x3fc6 + + // Set up watchdog to trigger after 500ms + watchdogConfig(WATCHDOG_500MS); + 3e26: 8d e0 ldi r24, 0x0D ; 13 + 3e28: c8 d0 rcall .+400 ; 0x3fba + + /* Set LED pin as output */ + LED_DDR |= _BV(LED); + 3e2a: 25 9a sbi 0x04, 5 ; 4 + 3e2c: 86 e0 ldi r24, 0x06 ; 6 +} + +#if LED_START_FLASHES > 0 +void flash_led(uint8_t count) { + do { + TCNT1 = -(F_CPU/(1024*16)); + 3e2e: 20 e3 ldi r18, 0x30 ; 48 + 3e30: 3c ef ldi r19, 0xFC ; 252 + TIFR1 = _BV(TOV1); + 3e32: 91 e0 ldi r25, 0x01 ; 1 +} + +#if LED_START_FLASHES > 0 +void flash_led(uint8_t count) { + do { + TCNT1 = -(F_CPU/(1024*16)); + 3e34: 30 93 85 00 sts 0x0085, r19 + 3e38: 20 93 84 00 sts 0x0084, r18 + TIFR1 = _BV(TOV1); + 3e3c: 96 bb out 0x16, r25 ; 22 + while(!(TIFR1 & _BV(TOV1))); + 3e3e: b0 9b sbis 0x16, 0 ; 22 + 3e40: fe cf rjmp .-4 ; 0x3e3e + LED_PIN |= _BV(LED); + 3e42: 1d 9a sbi 0x03, 5 ; 3 + return getch(); +} + +// Watchdog functions. These are only safe with interrupts turned off. +void watchdogReset() { + __asm__ __volatile__ ( + 3e44: a8 95 wdr + TCNT1 = -(F_CPU/(1024*16)); + TIFR1 = _BV(TOV1); + while(!(TIFR1 & _BV(TOV1))); + LED_PIN |= _BV(LED); + watchdogReset(); + } while (--count); + 3e46: 81 50 subi r24, 0x01 ; 1 + 3e48: a9 f7 brne .-22 ; 0x3e34 + /* get character from UART */ + ch = getch(); + + if(ch == STK_GET_PARAMETER) { + // GET PARAMETER returns a generic 0x03 reply - enough to keep Avrdude happy + getNch(1); + 3e4a: dd 24 eor r13, r13 + 3e4c: d3 94 inc r13 + boot_page_fill((uint16_t)(void*)addrPtr,a); + addrPtr += 2; + } while (--ch); + + // Write from programming buffer + boot_page_write((uint16_t)(void*)address); + 3e4e: a5 e0 ldi r26, 0x05 ; 5 + 3e50: ea 2e mov r14, r26 + boot_spm_busy_wait(); + +#if defined(RWWSRE) + // Reenable read access to flash + boot_rww_enable(); + 3e52: f1 e1 ldi r31, 0x11 ; 17 + 3e54: ff 2e mov r15, r31 +#endif + + /* Forever loop */ + for (;;) { + /* get character from UART */ + ch = getch(); + 3e56: a4 d0 rcall .+328 ; 0x3fa0 + + if(ch == STK_GET_PARAMETER) { + 3e58: 81 34 cpi r24, 0x41 ; 65 + 3e5a: 21 f4 brne .+8 ; 0x3e64 + // GET PARAMETER returns a generic 0x03 reply - enough to keep Avrdude happy + getNch(1); + 3e5c: 81 e0 ldi r24, 0x01 ; 1 + 3e5e: be d0 rcall .+380 ; 0x3fdc + putch(0x03); + 3e60: 83 e0 ldi r24, 0x03 ; 3 + 3e62: 24 c0 rjmp .+72 ; 0x3eac + } + else if(ch == STK_SET_DEVICE) { + 3e64: 82 34 cpi r24, 0x42 ; 66 + 3e66: 11 f4 brne .+4 ; 0x3e6c + // SET DEVICE is ignored + getNch(20); + 3e68: 84 e1 ldi r24, 0x14 ; 20 + 3e6a: 03 c0 rjmp .+6 ; 0x3e72 + } + else if(ch == STK_SET_DEVICE_EXT) { + 3e6c: 85 34 cpi r24, 0x45 ; 69 + 3e6e: 19 f4 brne .+6 ; 0x3e76 + // SET DEVICE EXT is ignored + getNch(5); + 3e70: 85 e0 ldi r24, 0x05 ; 5 + 3e72: b4 d0 rcall .+360 ; 0x3fdc + 3e74: 8a c0 rjmp .+276 ; 0x3f8a + } + else if(ch == STK_LOAD_ADDRESS) { + 3e76: 85 35 cpi r24, 0x55 ; 85 + 3e78: a1 f4 brne .+40 ; 0x3ea2 + // LOAD ADDRESS + address = getch(); + 3e7a: 92 d0 rcall .+292 ; 0x3fa0 + 3e7c: 08 2f mov r16, r24 + 3e7e: 10 e0 ldi r17, 0x00 ; 0 + 3e80: 10 93 01 02 sts 0x0201, r17 + 3e84: 00 93 00 02 sts 0x0200, r16 + address = (address & 0xff) | (getch() << 8); + 3e88: 8b d0 rcall .+278 ; 0x3fa0 + 3e8a: 90 e0 ldi r25, 0x00 ; 0 + 3e8c: 98 2f mov r25, r24 + 3e8e: 88 27 eor r24, r24 + 3e90: 80 2b or r24, r16 + 3e92: 91 2b or r25, r17 + address += address; // Convert from word address to byte address + 3e94: 88 0f add r24, r24 + 3e96: 99 1f adc r25, r25 + 3e98: 90 93 01 02 sts 0x0201, r25 + 3e9c: 80 93 00 02 sts 0x0200, r24 + 3ea0: 73 c0 rjmp .+230 ; 0x3f88 + verifySpace(); + } + else if(ch == STK_UNIVERSAL) { + 3ea2: 86 35 cpi r24, 0x56 ; 86 + 3ea4: 29 f4 brne .+10 ; 0x3eb0 + // UNIVERSAL command is ignored + getNch(4); + 3ea6: 84 e0 ldi r24, 0x04 ; 4 + 3ea8: 99 d0 rcall .+306 ; 0x3fdc + putch(0x00); + 3eaa: 80 e0 ldi r24, 0x00 ; 0 + 3eac: 71 d0 rcall .+226 ; 0x3f90 + 3eae: 6d c0 rjmp .+218 ; 0x3f8a + } + /* Write memory, length is big endian and is in bytes */ + else if(ch == STK_PROG_PAGE) { + 3eb0: 84 36 cpi r24, 0x64 ; 100 + 3eb2: 09 f0 breq .+2 ; 0x3eb6 + 3eb4: 43 c0 rjmp .+134 ; 0x3f3c + // PROGRAM PAGE - we support flash programming only, not EEPROM + uint8_t *bufPtr; + uint16_t addrPtr; + + getLen(); + 3eb6: 7c d0 rcall .+248 ; 0x3fb0 + + // Immediately start page erase - this will 4.5ms + boot_page_erase((uint16_t)(void*)address); + 3eb8: e0 91 00 02 lds r30, 0x0200 + 3ebc: f0 91 01 02 lds r31, 0x0201 + 3ec0: 83 e0 ldi r24, 0x03 ; 3 + 3ec2: 80 93 57 00 sts 0x0057, r24 + 3ec6: e8 95 spm + 3ec8: c0 e0 ldi r28, 0x00 ; 0 + 3eca: d1 e0 ldi r29, 0x01 ; 1 + + // While that is going on, read in page contents + bufPtr = buff; + do *bufPtr++ = getch(); + 3ecc: 69 d0 rcall .+210 ; 0x3fa0 + 3ece: 89 93 st Y+, r24 + while (--length); + 3ed0: 80 91 02 02 lds r24, 0x0202 + 3ed4: 81 50 subi r24, 0x01 ; 1 + 3ed6: 80 93 02 02 sts 0x0202, r24 + 3eda: 88 23 and r24, r24 + 3edc: b9 f7 brne .-18 ; 0x3ecc + + // Read command terminator, start reply + verifySpace(); + 3ede: 78 d0 rcall .+240 ; 0x3fd0 + + // If only a partial page is to be programmed, the erase might not be complete. + // So check that here + boot_spm_busy_wait(); + 3ee0: 07 b6 in r0, 0x37 ; 55 + 3ee2: 00 fc sbrc r0, 0 + 3ee4: fd cf rjmp .-6 ; 0x3ee0 + } +#endif + + // Copy buffer into programming buffer + bufPtr = buff; + addrPtr = (uint16_t)(void*)address; + 3ee6: 40 91 00 02 lds r20, 0x0200 + 3eea: 50 91 01 02 lds r21, 0x0201 + 3eee: a0 e0 ldi r26, 0x00 ; 0 + 3ef0: b1 e0 ldi r27, 0x01 ; 1 + ch = SPM_PAGESIZE / 2; + do { + uint16_t a; + a = *bufPtr++; + 3ef2: 2c 91 ld r18, X + 3ef4: 30 e0 ldi r19, 0x00 ; 0 + a |= (*bufPtr++) << 8; + 3ef6: 11 96 adiw r26, 0x01 ; 1 + 3ef8: 8c 91 ld r24, X + 3efa: 11 97 sbiw r26, 0x01 ; 1 + 3efc: 90 e0 ldi r25, 0x00 ; 0 + 3efe: 98 2f mov r25, r24 + 3f00: 88 27 eor r24, r24 + 3f02: 82 2b or r24, r18 + 3f04: 93 2b or r25, r19 +#ifdef VIRTUAL_BOOT_PARTITION +#define rstVect (*(uint16_t*)(0x204)) +#define wdtVect (*(uint16_t*)(0x206)) +#endif +/* main program starts here */ +int main(void) { + 3f06: 12 96 adiw r26, 0x02 ; 2 + ch = SPM_PAGESIZE / 2; + do { + uint16_t a; + a = *bufPtr++; + a |= (*bufPtr++) << 8; + boot_page_fill((uint16_t)(void*)addrPtr,a); + 3f08: fa 01 movw r30, r20 + 3f0a: 0c 01 movw r0, r24 + 3f0c: d0 92 57 00 sts 0x0057, r13 + 3f10: e8 95 spm + 3f12: 11 24 eor r1, r1 + addrPtr += 2; + 3f14: 4e 5f subi r20, 0xFE ; 254 + 3f16: 5f 4f sbci r21, 0xFF ; 255 + } while (--ch); + 3f18: f1 e0 ldi r31, 0x01 ; 1 + 3f1a: a0 38 cpi r26, 0x80 ; 128 + 3f1c: bf 07 cpc r27, r31 + 3f1e: 49 f7 brne .-46 ; 0x3ef2 + + // Write from programming buffer + boot_page_write((uint16_t)(void*)address); + 3f20: e0 91 00 02 lds r30, 0x0200 + 3f24: f0 91 01 02 lds r31, 0x0201 + 3f28: e0 92 57 00 sts 0x0057, r14 + 3f2c: e8 95 spm + boot_spm_busy_wait(); + 3f2e: 07 b6 in r0, 0x37 ; 55 + 3f30: 00 fc sbrc r0, 0 + 3f32: fd cf rjmp .-6 ; 0x3f2e + +#if defined(RWWSRE) + // Reenable read access to flash + boot_rww_enable(); + 3f34: f0 92 57 00 sts 0x0057, r15 + 3f38: e8 95 spm + 3f3a: 27 c0 rjmp .+78 ; 0x3f8a +#endif + + } + /* Read memory block mode, length is big endian. */ + else if(ch == STK_READ_PAGE) { + 3f3c: 84 37 cpi r24, 0x74 ; 116 + 3f3e: b9 f4 brne .+46 ; 0x3f6e + // READ PAGE - we only read flash + getLen(); + 3f40: 37 d0 rcall .+110 ; 0x3fb0 + verifySpace(); + 3f42: 46 d0 rcall .+140 ; 0x3fd0 + else ch = pgm_read_byte_near(address); + address++; + putch(ch); + } while (--length); +#else + do putch(pgm_read_byte_near(address++)); + 3f44: e0 91 00 02 lds r30, 0x0200 + 3f48: f0 91 01 02 lds r31, 0x0201 + 3f4c: 31 96 adiw r30, 0x01 ; 1 + 3f4e: f0 93 01 02 sts 0x0201, r31 + 3f52: e0 93 00 02 sts 0x0200, r30 + 3f56: 31 97 sbiw r30, 0x01 ; 1 + 3f58: e4 91 lpm r30, Z+ + 3f5a: 8e 2f mov r24, r30 + 3f5c: 19 d0 rcall .+50 ; 0x3f90 + while (--length); + 3f5e: 80 91 02 02 lds r24, 0x0202 + 3f62: 81 50 subi r24, 0x01 ; 1 + 3f64: 80 93 02 02 sts 0x0202, r24 + 3f68: 88 23 and r24, r24 + 3f6a: 61 f7 brne .-40 ; 0x3f44 + 3f6c: 0e c0 rjmp .+28 ; 0x3f8a +#endif + } + + /* Get device signature bytes */ + else if(ch == STK_READ_SIGN) { + 3f6e: 85 37 cpi r24, 0x75 ; 117 + 3f70: 39 f4 brne .+14 ; 0x3f80 + // READ SIGN - return what Avrdude wants to hear + verifySpace(); + 3f72: 2e d0 rcall .+92 ; 0x3fd0 + putch(SIGNATURE_0); + 3f74: 8e e1 ldi r24, 0x1E ; 30 + 3f76: 0c d0 rcall .+24 ; 0x3f90 + putch(SIGNATURE_1); + 3f78: 84 e9 ldi r24, 0x94 ; 148 + 3f7a: 0a d0 rcall .+20 ; 0x3f90 + putch(SIGNATURE_2); + 3f7c: 86 e0 ldi r24, 0x06 ; 6 + 3f7e: 96 cf rjmp .-212 ; 0x3eac + } + else if (ch == 'Q') { + 3f80: 81 35 cpi r24, 0x51 ; 81 + 3f82: 11 f4 brne .+4 ; 0x3f88 + // Adaboot no-wait mod + watchdogConfig(WATCHDOG_16MS); + 3f84: 88 e0 ldi r24, 0x08 ; 8 + 3f86: 19 d0 rcall .+50 ; 0x3fba + verifySpace(); + } + else { + // This covers the response to commands like STK_ENTER_PROGMODE + verifySpace(); + 3f88: 23 d0 rcall .+70 ; 0x3fd0 + } + putch(STK_OK); + 3f8a: 80 e1 ldi r24, 0x10 ; 16 + 3f8c: 01 d0 rcall .+2 ; 0x3f90 + 3f8e: 63 cf rjmp .-314 ; 0x3e56 + +00003f90 : + } +} + +void putch(char ch) { + 3f90: 98 2f mov r25, r24 +#ifndef SOFT_UART + while (!(UCSR0A & _BV(UDRE0))); + 3f92: 80 91 c0 00 lds r24, 0x00C0 + 3f96: 85 ff sbrs r24, 5 + 3f98: fc cf rjmp .-8 ; 0x3f92 + UDR0 = ch; + 3f9a: 90 93 c6 00 sts 0x00C6, r25 + [uartBit] "I" (UART_TX_BIT) + : + "r25" + ); +#endif +} + 3f9e: 08 95 ret + +00003fa0 : + return getch(); +} + +// Watchdog functions. These are only safe with interrupts turned off. +void watchdogReset() { + __asm__ __volatile__ ( + 3fa0: a8 95 wdr + [uartBit] "I" (UART_RX_BIT) + : + "r25" +); +#else + while(!(UCSR0A & _BV(RXC0))); + 3fa2: 80 91 c0 00 lds r24, 0x00C0 + 3fa6: 87 ff sbrs r24, 7 + 3fa8: fc cf rjmp .-8 ; 0x3fa2 + ch = UDR0; + 3faa: 80 91 c6 00 lds r24, 0x00C6 +#ifdef LED_DATA_FLASH + LED_PIN |= _BV(LED); +#endif + + return ch; +} + 3fae: 08 95 ret + +00003fb0 : + } while (--count); +} +#endif + +uint8_t getLen() { + getch(); + 3fb0: f7 df rcall .-18 ; 0x3fa0 + length = getch(); + 3fb2: f6 df rcall .-20 ; 0x3fa0 + 3fb4: 80 93 02 02 sts 0x0202, r24 + return getch(); +} + 3fb8: f3 cf rjmp .-26 ; 0x3fa0 + +00003fba : + "wdr\n" + ); +} + +void watchdogConfig(uint8_t x) { + WDTCSR = _BV(WDCE) | _BV(WDE); + 3fba: e0 e6 ldi r30, 0x60 ; 96 + 3fbc: f0 e0 ldi r31, 0x00 ; 0 + 3fbe: 98 e1 ldi r25, 0x18 ; 24 + 3fc0: 90 83 st Z, r25 + WDTCSR = x; + 3fc2: 80 83 st Z, r24 +} + 3fc4: 08 95 ret + +00003fc6 : + +void appStart() { + watchdogConfig(WATCHDOG_OFF); + 3fc6: 80 e0 ldi r24, 0x00 ; 0 + 3fc8: f8 df rcall .-16 ; 0x3fba + __asm__ __volatile__ ( + 3fca: ee 27 eor r30, r30 + 3fcc: ff 27 eor r31, r31 + 3fce: 09 94 ijmp + +00003fd0 : + do getch(); while (--count); + verifySpace(); +} + +void verifySpace() { + if (getch() != CRC_EOP) appStart(); + 3fd0: e7 df rcall .-50 ; 0x3fa0 + 3fd2: 80 32 cpi r24, 0x20 ; 32 + 3fd4: 09 f0 breq .+2 ; 0x3fd8 + 3fd6: f7 df rcall .-18 ; 0x3fc6 + putch(STK_INSYNC); + 3fd8: 84 e1 ldi r24, 0x14 ; 20 +} + 3fda: da cf rjmp .-76 ; 0x3f90 + ::[count] "M" (UART_B_VALUE) + ); +} +#endif + +void getNch(uint8_t count) { + 3fdc: 1f 93 push r17 + 3fde: 18 2f mov r17, r24 + +00003fe0 : + do getch(); while (--count); + 3fe0: df df rcall .-66 ; 0x3fa0 + 3fe2: 11 50 subi r17, 0x01 ; 1 + 3fe4: e9 f7 brne .-6 ; 0x3fe0 + verifySpace(); + 3fe6: f4 df rcall .-24 ; 0x3fd0 +} + 3fe8: 1f 91 pop r17 + 3fea: 08 95 ret diff --git a/test/ardmake/hardware/bootloaders/optiboot/optiboot_lilypad.hex b/test/ardmake/hardware/bootloaders/optiboot/optiboot_lilypad.hex new file mode 100644 index 0000000..9d31a7a --- /dev/null +++ b/test/ardmake/hardware/bootloaders/optiboot/optiboot_lilypad.hex @@ -0,0 +1,34 @@ +:103E000085E08093810084B714BE81FFE4D08DE00B +:103E1000DCD0259A519A86E028E13EEF91E030937C +:103E200085002093840096BBB09BFECF1D9AA89579 +:103E30008150A9F7DD24D394A5E0EA2EF1E1FF2E0D +:103E4000ABD0813421F481E0D1D083E024C082342E +:103E500011F484E103C0853419F485E0C7D08AC029 +:103E60008535A1F499D0082F10E01093010200933A +:103E7000000292D090E0982F8827802B912B880FFA +:103E8000991F909301028093000273C0863529F434 +:103E900084E0ACD080E071D06DC0843609F043C0BE +:103EA0008FD0E0910002F091010283E080935700EF +:103EB000E895C0E0D1E070D08993809102028150F2 +:103EC000809302028823B9F78BD007B600FCFDCFA0 +:103ED0004091000250910102A0E0B1E02C9130E04D +:103EE00011968C91119790E0982F8827822B932B15 +:103EF0001296FA010C01D0925700E89511244E5FFA +:103F00005F4FF1E0A038BF0749F7E0910002F09160 +:103F10000102E0925700E89507B600FCFDCFF09251 +:103F20005700E89527C08437B9F44AD059D0E091BA +:103F30000002F09101023196F0930102E093000239 +:103F40003197E4918E2F19D0809102028150809395 +:103F50000202882361F70EC0853739F441D08EE123 +:103F60000CD084E90AD086E096CF813511F488E040 +:103F70002CD036D080E101D063CF2AE030E08095AC +:103F8000089410F4599802C0599A000015D014D022 +:103F900086952A95B1F70895A89529E030E04899CB +:103FA000FECF0AD009D008D08894489908942A9561 +:103FB00011F08795F7CF089598E09A95F1F7089555 +:103FC000EBDFEADF80930202E7CFE0E6F0E098E182 +:103FD00090838083089580E0F8DFEE27FF2709941F +:103FE000DBDF803209F0F7DF84E1C7CF1F93182FA2 +:0C3FF000D3DF1150E9F7F4DF1F910895B2 +:0400000300003E00BB +:00000001FF diff --git a/test/ardmake/hardware/bootloaders/optiboot/optiboot_lilypad.lst b/test/ardmake/hardware/bootloaders/optiboot/optiboot_lilypad.lst new file mode 100644 index 0000000..0e46bd1 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/optiboot/optiboot_lilypad.lst @@ -0,0 +1,533 @@ + +optiboot_lilypad.elf: file format elf32-avr + +Sections: +Idx Name Size VMA LMA File off Algn + 0 .text 000001fc 00003e00 00003e00 00000054 2**1 + CONTENTS, ALLOC, LOAD, READONLY, CODE + 1 .debug_aranges 00000028 00000000 00000000 00000250 2**0 + CONTENTS, READONLY, DEBUGGING + 2 .debug_pubnames 00000078 00000000 00000000 00000278 2**0 + CONTENTS, READONLY, DEBUGGING + 3 .debug_info 00000277 00000000 00000000 000002f0 2**0 + CONTENTS, READONLY, DEBUGGING + 4 .debug_abbrev 00000194 00000000 00000000 00000567 2**0 + CONTENTS, READONLY, DEBUGGING + 5 .debug_line 000003bb 00000000 00000000 000006fb 2**0 + CONTENTS, READONLY, DEBUGGING + 6 .debug_frame 000000a0 00000000 00000000 00000ab8 2**2 + CONTENTS, READONLY, DEBUGGING + 7 .debug_str 0000013f 00000000 00000000 00000b58 2**0 + CONTENTS, READONLY, DEBUGGING + 8 .debug_loc 000001a0 00000000 00000000 00000c97 2**0 + CONTENTS, READONLY, DEBUGGING + 9 .debug_ranges 00000070 00000000 00000000 00000e37 2**0 + CONTENTS, READONLY, DEBUGGING + +Disassembly of section .text: + +00003e00
: +#ifdef VIRTUAL_BOOT_PARTITION +#define rstVect (*(uint16_t*)(0x204)) +#define wdtVect (*(uint16_t*)(0x206)) +#endif +/* main program starts here */ +int main(void) { + 3e00: 85 e0 ldi r24, 0x05 ; 5 + 3e02: 80 93 81 00 sts 0x0081, r24 + UCSR0C = _BV(UCSZ00) | _BV(UCSZ01); + UBRR0L = (uint8_t)( (F_CPU + BAUD_RATE * 4L) / (BAUD_RATE * 8L) - 1 ); +#endif + + // Adaboot no-wait mod + ch = MCUSR; + 3e06: 84 b7 in r24, 0x34 ; 52 + MCUSR = 0; + 3e08: 14 be out 0x34, r1 ; 52 + if (!(ch & _BV(EXTRF))) appStart(); + 3e0a: 81 ff sbrs r24, 1 + 3e0c: e4 d0 rcall .+456 ; 0x3fd6 + + // Set up watchdog to trigger after 500ms + watchdogConfig(WATCHDOG_500MS); + 3e0e: 8d e0 ldi r24, 0x0D ; 13 + 3e10: dc d0 rcall .+440 ; 0x3fca + + /* Set LED pin as output */ + LED_DDR |= _BV(LED); + 3e12: 25 9a sbi 0x04, 5 ; 4 + +#ifdef SOFT_UART + /* Set TX pin as output */ + UART_DDR |= _BV(UART_TX_BIT); + 3e14: 51 9a sbi 0x0a, 1 ; 10 + 3e16: 86 e0 ldi r24, 0x06 ; 6 +} + +#if LED_START_FLASHES > 0 +void flash_led(uint8_t count) { + do { + TCNT1 = -(F_CPU/(1024*16)); + 3e18: 28 e1 ldi r18, 0x18 ; 24 + 3e1a: 3e ef ldi r19, 0xFE ; 254 + TIFR1 = _BV(TOV1); + 3e1c: 91 e0 ldi r25, 0x01 ; 1 +} + +#if LED_START_FLASHES > 0 +void flash_led(uint8_t count) { + do { + TCNT1 = -(F_CPU/(1024*16)); + 3e1e: 30 93 85 00 sts 0x0085, r19 + 3e22: 20 93 84 00 sts 0x0084, r18 + TIFR1 = _BV(TOV1); + 3e26: 96 bb out 0x16, r25 ; 22 + while(!(TIFR1 & _BV(TOV1))); + 3e28: b0 9b sbis 0x16, 0 ; 22 + 3e2a: fe cf rjmp .-4 ; 0x3e28 + LED_PIN |= _BV(LED); + 3e2c: 1d 9a sbi 0x03, 5 ; 3 + return getch(); +} + +// Watchdog functions. These are only safe with interrupts turned off. +void watchdogReset() { + __asm__ __volatile__ ( + 3e2e: a8 95 wdr + TCNT1 = -(F_CPU/(1024*16)); + TIFR1 = _BV(TOV1); + while(!(TIFR1 & _BV(TOV1))); + LED_PIN |= _BV(LED); + watchdogReset(); + } while (--count); + 3e30: 81 50 subi r24, 0x01 ; 1 + 3e32: a9 f7 brne .-22 ; 0x3e1e + /* get character from UART */ + ch = getch(); + + if(ch == STK_GET_PARAMETER) { + // GET PARAMETER returns a generic 0x03 reply - enough to keep Avrdude happy + getNch(1); + 3e34: dd 24 eor r13, r13 + 3e36: d3 94 inc r13 + boot_page_fill((uint16_t)(void*)addrPtr,a); + addrPtr += 2; + } while (--ch); + + // Write from programming buffer + boot_page_write((uint16_t)(void*)address); + 3e38: a5 e0 ldi r26, 0x05 ; 5 + 3e3a: ea 2e mov r14, r26 + boot_spm_busy_wait(); + +#if defined(RWWSRE) + // Reenable read access to flash + boot_rww_enable(); + 3e3c: f1 e1 ldi r31, 0x11 ; 17 + 3e3e: ff 2e mov r15, r31 +#endif + + /* Forever loop */ + for (;;) { + /* get character from UART */ + ch = getch(); + 3e40: ab d0 rcall .+342 ; 0x3f98 + + if(ch == STK_GET_PARAMETER) { + 3e42: 81 34 cpi r24, 0x41 ; 65 + 3e44: 21 f4 brne .+8 ; 0x3e4e + // GET PARAMETER returns a generic 0x03 reply - enough to keep Avrdude happy + getNch(1); + 3e46: 81 e0 ldi r24, 0x01 ; 1 + 3e48: d1 d0 rcall .+418 ; 0x3fec + putch(0x03); + 3e4a: 83 e0 ldi r24, 0x03 ; 3 + 3e4c: 24 c0 rjmp .+72 ; 0x3e96 + } + else if(ch == STK_SET_DEVICE) { + 3e4e: 82 34 cpi r24, 0x42 ; 66 + 3e50: 11 f4 brne .+4 ; 0x3e56 + // SET DEVICE is ignored + getNch(20); + 3e52: 84 e1 ldi r24, 0x14 ; 20 + 3e54: 03 c0 rjmp .+6 ; 0x3e5c + } + else if(ch == STK_SET_DEVICE_EXT) { + 3e56: 85 34 cpi r24, 0x45 ; 69 + 3e58: 19 f4 brne .+6 ; 0x3e60 + // SET DEVICE EXT is ignored + getNch(5); + 3e5a: 85 e0 ldi r24, 0x05 ; 5 + 3e5c: c7 d0 rcall .+398 ; 0x3fec + 3e5e: 8a c0 rjmp .+276 ; 0x3f74 + } + else if(ch == STK_LOAD_ADDRESS) { + 3e60: 85 35 cpi r24, 0x55 ; 85 + 3e62: a1 f4 brne .+40 ; 0x3e8c + // LOAD ADDRESS + address = getch(); + 3e64: 99 d0 rcall .+306 ; 0x3f98 + 3e66: 08 2f mov r16, r24 + 3e68: 10 e0 ldi r17, 0x00 ; 0 + 3e6a: 10 93 01 02 sts 0x0201, r17 + 3e6e: 00 93 00 02 sts 0x0200, r16 + address = (address & 0xff) | (getch() << 8); + 3e72: 92 d0 rcall .+292 ; 0x3f98 + 3e74: 90 e0 ldi r25, 0x00 ; 0 + 3e76: 98 2f mov r25, r24 + 3e78: 88 27 eor r24, r24 + 3e7a: 80 2b or r24, r16 + 3e7c: 91 2b or r25, r17 + address += address; // Convert from word address to byte address + 3e7e: 88 0f add r24, r24 + 3e80: 99 1f adc r25, r25 + 3e82: 90 93 01 02 sts 0x0201, r25 + 3e86: 80 93 00 02 sts 0x0200, r24 + 3e8a: 73 c0 rjmp .+230 ; 0x3f72 + verifySpace(); + } + else if(ch == STK_UNIVERSAL) { + 3e8c: 86 35 cpi r24, 0x56 ; 86 + 3e8e: 29 f4 brne .+10 ; 0x3e9a + // UNIVERSAL command is ignored + getNch(4); + 3e90: 84 e0 ldi r24, 0x04 ; 4 + 3e92: ac d0 rcall .+344 ; 0x3fec + putch(0x00); + 3e94: 80 e0 ldi r24, 0x00 ; 0 + 3e96: 71 d0 rcall .+226 ; 0x3f7a + 3e98: 6d c0 rjmp .+218 ; 0x3f74 + } + /* Write memory, length is big endian and is in bytes */ + else if(ch == STK_PROG_PAGE) { + 3e9a: 84 36 cpi r24, 0x64 ; 100 + 3e9c: 09 f0 breq .+2 ; 0x3ea0 + 3e9e: 43 c0 rjmp .+134 ; 0x3f26 + // PROGRAM PAGE - we support flash programming only, not EEPROM + uint8_t *bufPtr; + uint16_t addrPtr; + + getLen(); + 3ea0: 8f d0 rcall .+286 ; 0x3fc0 + + // Immediately start page erase - this will 4.5ms + boot_page_erase((uint16_t)(void*)address); + 3ea2: e0 91 00 02 lds r30, 0x0200 + 3ea6: f0 91 01 02 lds r31, 0x0201 + 3eaa: 83 e0 ldi r24, 0x03 ; 3 + 3eac: 80 93 57 00 sts 0x0057, r24 + 3eb0: e8 95 spm + 3eb2: c0 e0 ldi r28, 0x00 ; 0 + 3eb4: d1 e0 ldi r29, 0x01 ; 1 + + // While that is going on, read in page contents + bufPtr = buff; + do *bufPtr++ = getch(); + 3eb6: 70 d0 rcall .+224 ; 0x3f98 + 3eb8: 89 93 st Y+, r24 + while (--length); + 3eba: 80 91 02 02 lds r24, 0x0202 + 3ebe: 81 50 subi r24, 0x01 ; 1 + 3ec0: 80 93 02 02 sts 0x0202, r24 + 3ec4: 88 23 and r24, r24 + 3ec6: b9 f7 brne .-18 ; 0x3eb6 + + // Read command terminator, start reply + verifySpace(); + 3ec8: 8b d0 rcall .+278 ; 0x3fe0 + + // If only a partial page is to be programmed, the erase might not be complete. + // So check that here + boot_spm_busy_wait(); + 3eca: 07 b6 in r0, 0x37 ; 55 + 3ecc: 00 fc sbrc r0, 0 + 3ece: fd cf rjmp .-6 ; 0x3eca + } +#endif + + // Copy buffer into programming buffer + bufPtr = buff; + addrPtr = (uint16_t)(void*)address; + 3ed0: 40 91 00 02 lds r20, 0x0200 + 3ed4: 50 91 01 02 lds r21, 0x0201 + 3ed8: a0 e0 ldi r26, 0x00 ; 0 + 3eda: b1 e0 ldi r27, 0x01 ; 1 + ch = SPM_PAGESIZE / 2; + do { + uint16_t a; + a = *bufPtr++; + 3edc: 2c 91 ld r18, X + 3ede: 30 e0 ldi r19, 0x00 ; 0 + a |= (*bufPtr++) << 8; + 3ee0: 11 96 adiw r26, 0x01 ; 1 + 3ee2: 8c 91 ld r24, X + 3ee4: 11 97 sbiw r26, 0x01 ; 1 + 3ee6: 90 e0 ldi r25, 0x00 ; 0 + 3ee8: 98 2f mov r25, r24 + 3eea: 88 27 eor r24, r24 + 3eec: 82 2b or r24, r18 + 3eee: 93 2b or r25, r19 +#ifdef VIRTUAL_BOOT_PARTITION +#define rstVect (*(uint16_t*)(0x204)) +#define wdtVect (*(uint16_t*)(0x206)) +#endif +/* main program starts here */ +int main(void) { + 3ef0: 12 96 adiw r26, 0x02 ; 2 + ch = SPM_PAGESIZE / 2; + do { + uint16_t a; + a = *bufPtr++; + a |= (*bufPtr++) << 8; + boot_page_fill((uint16_t)(void*)addrPtr,a); + 3ef2: fa 01 movw r30, r20 + 3ef4: 0c 01 movw r0, r24 + 3ef6: d0 92 57 00 sts 0x0057, r13 + 3efa: e8 95 spm + 3efc: 11 24 eor r1, r1 + addrPtr += 2; + 3efe: 4e 5f subi r20, 0xFE ; 254 + 3f00: 5f 4f sbci r21, 0xFF ; 255 + } while (--ch); + 3f02: f1 e0 ldi r31, 0x01 ; 1 + 3f04: a0 38 cpi r26, 0x80 ; 128 + 3f06: bf 07 cpc r27, r31 + 3f08: 49 f7 brne .-46 ; 0x3edc + + // Write from programming buffer + boot_page_write((uint16_t)(void*)address); + 3f0a: e0 91 00 02 lds r30, 0x0200 + 3f0e: f0 91 01 02 lds r31, 0x0201 + 3f12: e0 92 57 00 sts 0x0057, r14 + 3f16: e8 95 spm + boot_spm_busy_wait(); + 3f18: 07 b6 in r0, 0x37 ; 55 + 3f1a: 00 fc sbrc r0, 0 + 3f1c: fd cf rjmp .-6 ; 0x3f18 + +#if defined(RWWSRE) + // Reenable read access to flash + boot_rww_enable(); + 3f1e: f0 92 57 00 sts 0x0057, r15 + 3f22: e8 95 spm + 3f24: 27 c0 rjmp .+78 ; 0x3f74 +#endif + + } + /* Read memory block mode, length is big endian. */ + else if(ch == STK_READ_PAGE) { + 3f26: 84 37 cpi r24, 0x74 ; 116 + 3f28: b9 f4 brne .+46 ; 0x3f58 + // READ PAGE - we only read flash + getLen(); + 3f2a: 4a d0 rcall .+148 ; 0x3fc0 + verifySpace(); + 3f2c: 59 d0 rcall .+178 ; 0x3fe0 + else ch = pgm_read_byte_near(address); + address++; + putch(ch); + } while (--length); +#else + do putch(pgm_read_byte_near(address++)); + 3f2e: e0 91 00 02 lds r30, 0x0200 + 3f32: f0 91 01 02 lds r31, 0x0201 + 3f36: 31 96 adiw r30, 0x01 ; 1 + 3f38: f0 93 01 02 sts 0x0201, r31 + 3f3c: e0 93 00 02 sts 0x0200, r30 + 3f40: 31 97 sbiw r30, 0x01 ; 1 + 3f42: e4 91 lpm r30, Z+ + 3f44: 8e 2f mov r24, r30 + 3f46: 19 d0 rcall .+50 ; 0x3f7a + while (--length); + 3f48: 80 91 02 02 lds r24, 0x0202 + 3f4c: 81 50 subi r24, 0x01 ; 1 + 3f4e: 80 93 02 02 sts 0x0202, r24 + 3f52: 88 23 and r24, r24 + 3f54: 61 f7 brne .-40 ; 0x3f2e + 3f56: 0e c0 rjmp .+28 ; 0x3f74 +#endif + } + + /* Get device signature bytes */ + else if(ch == STK_READ_SIGN) { + 3f58: 85 37 cpi r24, 0x75 ; 117 + 3f5a: 39 f4 brne .+14 ; 0x3f6a + // READ SIGN - return what Avrdude wants to hear + verifySpace(); + 3f5c: 41 d0 rcall .+130 ; 0x3fe0 + putch(SIGNATURE_0); + 3f5e: 8e e1 ldi r24, 0x1E ; 30 + 3f60: 0c d0 rcall .+24 ; 0x3f7a + putch(SIGNATURE_1); + 3f62: 84 e9 ldi r24, 0x94 ; 148 + 3f64: 0a d0 rcall .+20 ; 0x3f7a + putch(SIGNATURE_2); + 3f66: 86 e0 ldi r24, 0x06 ; 6 + 3f68: 96 cf rjmp .-212 ; 0x3e96 + } + else if (ch == 'Q') { + 3f6a: 81 35 cpi r24, 0x51 ; 81 + 3f6c: 11 f4 brne .+4 ; 0x3f72 + // Adaboot no-wait mod + watchdogConfig(WATCHDOG_16MS); + 3f6e: 88 e0 ldi r24, 0x08 ; 8 + 3f70: 2c d0 rcall .+88 ; 0x3fca + verifySpace(); + } + else { + // This covers the response to commands like STK_ENTER_PROGMODE + verifySpace(); + 3f72: 36 d0 rcall .+108 ; 0x3fe0 + } + putch(STK_OK); + 3f74: 80 e1 ldi r24, 0x10 ; 16 + 3f76: 01 d0 rcall .+2 ; 0x3f7a + 3f78: 63 cf rjmp .-314 ; 0x3e40 + +00003f7a : +void putch(char ch) { +#ifndef SOFT_UART + while (!(UCSR0A & _BV(UDRE0))); + UDR0 = ch; +#else + __asm__ __volatile__ ( + 3f7a: 2a e0 ldi r18, 0x0A ; 10 + 3f7c: 30 e0 ldi r19, 0x00 ; 0 + 3f7e: 80 95 com r24 + 3f80: 08 94 sec + 3f82: 10 f4 brcc .+4 ; 0x3f88 + 3f84: 59 98 cbi 0x0b, 1 ; 11 + 3f86: 02 c0 rjmp .+4 ; 0x3f8c + 3f88: 59 9a sbi 0x0b, 1 ; 11 + 3f8a: 00 00 nop + 3f8c: 15 d0 rcall .+42 ; 0x3fb8 + 3f8e: 14 d0 rcall .+40 ; 0x3fb8 + 3f90: 86 95 lsr r24 + 3f92: 2a 95 dec r18 + 3f94: b1 f7 brne .-20 ; 0x3f82 + [uartBit] "I" (UART_TX_BIT) + : + "r25" + ); +#endif +} + 3f96: 08 95 ret + +00003f98 : + return getch(); +} + +// Watchdog functions. These are only safe with interrupts turned off. +void watchdogReset() { + __asm__ __volatile__ ( + 3f98: a8 95 wdr +#ifdef LED_DATA_FLASH + LED_PIN |= _BV(LED); +#endif + + return ch; +} + 3f9a: 29 e0 ldi r18, 0x09 ; 9 + 3f9c: 30 e0 ldi r19, 0x00 ; 0 + 3f9e: 48 99 sbic 0x09, 0 ; 9 + 3fa0: fe cf rjmp .-4 ; 0x3f9e + 3fa2: 0a d0 rcall .+20 ; 0x3fb8 + 3fa4: 09 d0 rcall .+18 ; 0x3fb8 + 3fa6: 08 d0 rcall .+16 ; 0x3fb8 + 3fa8: 88 94 clc + 3faa: 48 99 sbic 0x09, 0 ; 9 + 3fac: 08 94 sec + 3fae: 2a 95 dec r18 + 3fb0: 11 f0 breq .+4 ; 0x3fb6 + 3fb2: 87 95 ror r24 + 3fb4: f7 cf rjmp .-18 ; 0x3fa4 + 3fb6: 08 95 ret + +00003fb8 : +#if UART_B_VALUE > 255 +#error Baud rate too slow for soft UART +#endif + +void uartDelay() { + __asm__ __volatile__ ( + 3fb8: 98 e0 ldi r25, 0x08 ; 8 + 3fba: 9a 95 dec r25 + 3fbc: f1 f7 brne .-4 ; 0x3fba + 3fbe: 08 95 ret + +00003fc0 : + } while (--count); +} +#endif + +uint8_t getLen() { + getch(); + 3fc0: eb df rcall .-42 ; 0x3f98 + length = getch(); + 3fc2: ea df rcall .-44 ; 0x3f98 + 3fc4: 80 93 02 02 sts 0x0202, r24 + return getch(); +} + 3fc8: e7 cf rjmp .-50 ; 0x3f98 + +00003fca : + "wdr\n" + ); +} + +void watchdogConfig(uint8_t x) { + WDTCSR = _BV(WDCE) | _BV(WDE); + 3fca: e0 e6 ldi r30, 0x60 ; 96 + 3fcc: f0 e0 ldi r31, 0x00 ; 0 + 3fce: 98 e1 ldi r25, 0x18 ; 24 + 3fd0: 90 83 st Z, r25 + WDTCSR = x; + 3fd2: 80 83 st Z, r24 +} + 3fd4: 08 95 ret + +00003fd6 : + +void appStart() { + watchdogConfig(WATCHDOG_OFF); + 3fd6: 80 e0 ldi r24, 0x00 ; 0 + 3fd8: f8 df rcall .-16 ; 0x3fca + __asm__ __volatile__ ( + 3fda: ee 27 eor r30, r30 + 3fdc: ff 27 eor r31, r31 + 3fde: 09 94 ijmp + +00003fe0 : + do getch(); while (--count); + verifySpace(); +} + +void verifySpace() { + if (getch() != CRC_EOP) appStart(); + 3fe0: db df rcall .-74 ; 0x3f98 + 3fe2: 80 32 cpi r24, 0x20 ; 32 + 3fe4: 09 f0 breq .+2 ; 0x3fe8 + 3fe6: f7 df rcall .-18 ; 0x3fd6 + putch(STK_INSYNC); + 3fe8: 84 e1 ldi r24, 0x14 ; 20 +} + 3fea: c7 cf rjmp .-114 ; 0x3f7a + ::[count] "M" (UART_B_VALUE) + ); +} +#endif + +void getNch(uint8_t count) { + 3fec: 1f 93 push r17 + 3fee: 18 2f mov r17, r24 + +00003ff0 : + do getch(); while (--count); + 3ff0: d3 df rcall .-90 ; 0x3f98 + 3ff2: 11 50 subi r17, 0x01 ; 1 + 3ff4: e9 f7 brne .-6 ; 0x3ff0 + verifySpace(); + 3ff6: f4 df rcall .-24 ; 0x3fe0 +} + 3ff8: 1f 91 pop r17 + 3ffa: 08 95 ret diff --git a/test/ardmake/hardware/bootloaders/optiboot/optiboot_lilypad_resonator.hex b/test/ardmake/hardware/bootloaders/optiboot/optiboot_lilypad_resonator.hex new file mode 100644 index 0000000..9d31a7a --- /dev/null +++ b/test/ardmake/hardware/bootloaders/optiboot/optiboot_lilypad_resonator.hex @@ -0,0 +1,34 @@ +:103E000085E08093810084B714BE81FFE4D08DE00B +:103E1000DCD0259A519A86E028E13EEF91E030937C +:103E200085002093840096BBB09BFECF1D9AA89579 +:103E30008150A9F7DD24D394A5E0EA2EF1E1FF2E0D +:103E4000ABD0813421F481E0D1D083E024C082342E +:103E500011F484E103C0853419F485E0C7D08AC029 +:103E60008535A1F499D0082F10E01093010200933A +:103E7000000292D090E0982F8827802B912B880FFA +:103E8000991F909301028093000273C0863529F434 +:103E900084E0ACD080E071D06DC0843609F043C0BE +:103EA0008FD0E0910002F091010283E080935700EF +:103EB000E895C0E0D1E070D08993809102028150F2 +:103EC000809302028823B9F78BD007B600FCFDCFA0 +:103ED0004091000250910102A0E0B1E02C9130E04D +:103EE00011968C91119790E0982F8827822B932B15 +:103EF0001296FA010C01D0925700E89511244E5FFA +:103F00005F4FF1E0A038BF0749F7E0910002F09160 +:103F10000102E0925700E89507B600FCFDCFF09251 +:103F20005700E89527C08437B9F44AD059D0E091BA +:103F30000002F09101023196F0930102E093000239 +:103F40003197E4918E2F19D0809102028150809395 +:103F50000202882361F70EC0853739F441D08EE123 +:103F60000CD084E90AD086E096CF813511F488E040 +:103F70002CD036D080E101D063CF2AE030E08095AC +:103F8000089410F4599802C0599A000015D014D022 +:103F900086952A95B1F70895A89529E030E04899CB +:103FA000FECF0AD009D008D08894489908942A9561 +:103FB00011F08795F7CF089598E09A95F1F7089555 +:103FC000EBDFEADF80930202E7CFE0E6F0E098E182 +:103FD00090838083089580E0F8DFEE27FF2709941F +:103FE000DBDF803209F0F7DF84E1C7CF1F93182FA2 +:0C3FF000D3DF1150E9F7F4DF1F910895B2 +:0400000300003E00BB +:00000001FF diff --git a/test/ardmake/hardware/bootloaders/optiboot/optiboot_lilypad_resonator.lst b/test/ardmake/hardware/bootloaders/optiboot/optiboot_lilypad_resonator.lst new file mode 100644 index 0000000..80ecb83 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/optiboot/optiboot_lilypad_resonator.lst @@ -0,0 +1,533 @@ + +optiboot_lilypad_resonator.elf: file format elf32-avr + +Sections: +Idx Name Size VMA LMA File off Algn + 0 .text 000001fc 00003e00 00003e00 00000054 2**1 + CONTENTS, ALLOC, LOAD, READONLY, CODE + 1 .debug_aranges 00000028 00000000 00000000 00000250 2**0 + CONTENTS, READONLY, DEBUGGING + 2 .debug_pubnames 00000078 00000000 00000000 00000278 2**0 + CONTENTS, READONLY, DEBUGGING + 3 .debug_info 00000277 00000000 00000000 000002f0 2**0 + CONTENTS, READONLY, DEBUGGING + 4 .debug_abbrev 00000194 00000000 00000000 00000567 2**0 + CONTENTS, READONLY, DEBUGGING + 5 .debug_line 000003bb 00000000 00000000 000006fb 2**0 + CONTENTS, READONLY, DEBUGGING + 6 .debug_frame 000000a0 00000000 00000000 00000ab8 2**2 + CONTENTS, READONLY, DEBUGGING + 7 .debug_str 0000013f 00000000 00000000 00000b58 2**0 + CONTENTS, READONLY, DEBUGGING + 8 .debug_loc 000001a0 00000000 00000000 00000c97 2**0 + CONTENTS, READONLY, DEBUGGING + 9 .debug_ranges 00000070 00000000 00000000 00000e37 2**0 + CONTENTS, READONLY, DEBUGGING + +Disassembly of section .text: + +00003e00
: +#ifdef VIRTUAL_BOOT_PARTITION +#define rstVect (*(uint16_t*)(0x204)) +#define wdtVect (*(uint16_t*)(0x206)) +#endif +/* main program starts here */ +int main(void) { + 3e00: 85 e0 ldi r24, 0x05 ; 5 + 3e02: 80 93 81 00 sts 0x0081, r24 + UCSR0C = _BV(UCSZ00) | _BV(UCSZ01); + UBRR0L = (uint8_t)( (F_CPU + BAUD_RATE * 4L) / (BAUD_RATE * 8L) - 1 ); +#endif + + // Adaboot no-wait mod + ch = MCUSR; + 3e06: 84 b7 in r24, 0x34 ; 52 + MCUSR = 0; + 3e08: 14 be out 0x34, r1 ; 52 + if (!(ch & _BV(EXTRF))) appStart(); + 3e0a: 81 ff sbrs r24, 1 + 3e0c: e4 d0 rcall .+456 ; 0x3fd6 + + // Set up watchdog to trigger after 500ms + watchdogConfig(WATCHDOG_500MS); + 3e0e: 8d e0 ldi r24, 0x0D ; 13 + 3e10: dc d0 rcall .+440 ; 0x3fca + + /* Set LED pin as output */ + LED_DDR |= _BV(LED); + 3e12: 25 9a sbi 0x04, 5 ; 4 + +#ifdef SOFT_UART + /* Set TX pin as output */ + UART_DDR |= _BV(UART_TX_BIT); + 3e14: 51 9a sbi 0x0a, 1 ; 10 + 3e16: 86 e0 ldi r24, 0x06 ; 6 +} + +#if LED_START_FLASHES > 0 +void flash_led(uint8_t count) { + do { + TCNT1 = -(F_CPU/(1024*16)); + 3e18: 28 e1 ldi r18, 0x18 ; 24 + 3e1a: 3e ef ldi r19, 0xFE ; 254 + TIFR1 = _BV(TOV1); + 3e1c: 91 e0 ldi r25, 0x01 ; 1 +} + +#if LED_START_FLASHES > 0 +void flash_led(uint8_t count) { + do { + TCNT1 = -(F_CPU/(1024*16)); + 3e1e: 30 93 85 00 sts 0x0085, r19 + 3e22: 20 93 84 00 sts 0x0084, r18 + TIFR1 = _BV(TOV1); + 3e26: 96 bb out 0x16, r25 ; 22 + while(!(TIFR1 & _BV(TOV1))); + 3e28: b0 9b sbis 0x16, 0 ; 22 + 3e2a: fe cf rjmp .-4 ; 0x3e28 + LED_PIN |= _BV(LED); + 3e2c: 1d 9a sbi 0x03, 5 ; 3 + return getch(); +} + +// Watchdog functions. These are only safe with interrupts turned off. +void watchdogReset() { + __asm__ __volatile__ ( + 3e2e: a8 95 wdr + TCNT1 = -(F_CPU/(1024*16)); + TIFR1 = _BV(TOV1); + while(!(TIFR1 & _BV(TOV1))); + LED_PIN |= _BV(LED); + watchdogReset(); + } while (--count); + 3e30: 81 50 subi r24, 0x01 ; 1 + 3e32: a9 f7 brne .-22 ; 0x3e1e + /* get character from UART */ + ch = getch(); + + if(ch == STK_GET_PARAMETER) { + // GET PARAMETER returns a generic 0x03 reply - enough to keep Avrdude happy + getNch(1); + 3e34: dd 24 eor r13, r13 + 3e36: d3 94 inc r13 + boot_page_fill((uint16_t)(void*)addrPtr,a); + addrPtr += 2; + } while (--ch); + + // Write from programming buffer + boot_page_write((uint16_t)(void*)address); + 3e38: a5 e0 ldi r26, 0x05 ; 5 + 3e3a: ea 2e mov r14, r26 + boot_spm_busy_wait(); + +#if defined(RWWSRE) + // Reenable read access to flash + boot_rww_enable(); + 3e3c: f1 e1 ldi r31, 0x11 ; 17 + 3e3e: ff 2e mov r15, r31 +#endif + + /* Forever loop */ + for (;;) { + /* get character from UART */ + ch = getch(); + 3e40: ab d0 rcall .+342 ; 0x3f98 + + if(ch == STK_GET_PARAMETER) { + 3e42: 81 34 cpi r24, 0x41 ; 65 + 3e44: 21 f4 brne .+8 ; 0x3e4e + // GET PARAMETER returns a generic 0x03 reply - enough to keep Avrdude happy + getNch(1); + 3e46: 81 e0 ldi r24, 0x01 ; 1 + 3e48: d1 d0 rcall .+418 ; 0x3fec + putch(0x03); + 3e4a: 83 e0 ldi r24, 0x03 ; 3 + 3e4c: 24 c0 rjmp .+72 ; 0x3e96 + } + else if(ch == STK_SET_DEVICE) { + 3e4e: 82 34 cpi r24, 0x42 ; 66 + 3e50: 11 f4 brne .+4 ; 0x3e56 + // SET DEVICE is ignored + getNch(20); + 3e52: 84 e1 ldi r24, 0x14 ; 20 + 3e54: 03 c0 rjmp .+6 ; 0x3e5c + } + else if(ch == STK_SET_DEVICE_EXT) { + 3e56: 85 34 cpi r24, 0x45 ; 69 + 3e58: 19 f4 brne .+6 ; 0x3e60 + // SET DEVICE EXT is ignored + getNch(5); + 3e5a: 85 e0 ldi r24, 0x05 ; 5 + 3e5c: c7 d0 rcall .+398 ; 0x3fec + 3e5e: 8a c0 rjmp .+276 ; 0x3f74 + } + else if(ch == STK_LOAD_ADDRESS) { + 3e60: 85 35 cpi r24, 0x55 ; 85 + 3e62: a1 f4 brne .+40 ; 0x3e8c + // LOAD ADDRESS + address = getch(); + 3e64: 99 d0 rcall .+306 ; 0x3f98 + 3e66: 08 2f mov r16, r24 + 3e68: 10 e0 ldi r17, 0x00 ; 0 + 3e6a: 10 93 01 02 sts 0x0201, r17 + 3e6e: 00 93 00 02 sts 0x0200, r16 + address = (address & 0xff) | (getch() << 8); + 3e72: 92 d0 rcall .+292 ; 0x3f98 + 3e74: 90 e0 ldi r25, 0x00 ; 0 + 3e76: 98 2f mov r25, r24 + 3e78: 88 27 eor r24, r24 + 3e7a: 80 2b or r24, r16 + 3e7c: 91 2b or r25, r17 + address += address; // Convert from word address to byte address + 3e7e: 88 0f add r24, r24 + 3e80: 99 1f adc r25, r25 + 3e82: 90 93 01 02 sts 0x0201, r25 + 3e86: 80 93 00 02 sts 0x0200, r24 + 3e8a: 73 c0 rjmp .+230 ; 0x3f72 + verifySpace(); + } + else if(ch == STK_UNIVERSAL) { + 3e8c: 86 35 cpi r24, 0x56 ; 86 + 3e8e: 29 f4 brne .+10 ; 0x3e9a + // UNIVERSAL command is ignored + getNch(4); + 3e90: 84 e0 ldi r24, 0x04 ; 4 + 3e92: ac d0 rcall .+344 ; 0x3fec + putch(0x00); + 3e94: 80 e0 ldi r24, 0x00 ; 0 + 3e96: 71 d0 rcall .+226 ; 0x3f7a + 3e98: 6d c0 rjmp .+218 ; 0x3f74 + } + /* Write memory, length is big endian and is in bytes */ + else if(ch == STK_PROG_PAGE) { + 3e9a: 84 36 cpi r24, 0x64 ; 100 + 3e9c: 09 f0 breq .+2 ; 0x3ea0 + 3e9e: 43 c0 rjmp .+134 ; 0x3f26 + // PROGRAM PAGE - we support flash programming only, not EEPROM + uint8_t *bufPtr; + uint16_t addrPtr; + + getLen(); + 3ea0: 8f d0 rcall .+286 ; 0x3fc0 + + // Immediately start page erase - this will 4.5ms + boot_page_erase((uint16_t)(void*)address); + 3ea2: e0 91 00 02 lds r30, 0x0200 + 3ea6: f0 91 01 02 lds r31, 0x0201 + 3eaa: 83 e0 ldi r24, 0x03 ; 3 + 3eac: 80 93 57 00 sts 0x0057, r24 + 3eb0: e8 95 spm + 3eb2: c0 e0 ldi r28, 0x00 ; 0 + 3eb4: d1 e0 ldi r29, 0x01 ; 1 + + // While that is going on, read in page contents + bufPtr = buff; + do *bufPtr++ = getch(); + 3eb6: 70 d0 rcall .+224 ; 0x3f98 + 3eb8: 89 93 st Y+, r24 + while (--length); + 3eba: 80 91 02 02 lds r24, 0x0202 + 3ebe: 81 50 subi r24, 0x01 ; 1 + 3ec0: 80 93 02 02 sts 0x0202, r24 + 3ec4: 88 23 and r24, r24 + 3ec6: b9 f7 brne .-18 ; 0x3eb6 + + // Read command terminator, start reply + verifySpace(); + 3ec8: 8b d0 rcall .+278 ; 0x3fe0 + + // If only a partial page is to be programmed, the erase might not be complete. + // So check that here + boot_spm_busy_wait(); + 3eca: 07 b6 in r0, 0x37 ; 55 + 3ecc: 00 fc sbrc r0, 0 + 3ece: fd cf rjmp .-6 ; 0x3eca + } +#endif + + // Copy buffer into programming buffer + bufPtr = buff; + addrPtr = (uint16_t)(void*)address; + 3ed0: 40 91 00 02 lds r20, 0x0200 + 3ed4: 50 91 01 02 lds r21, 0x0201 + 3ed8: a0 e0 ldi r26, 0x00 ; 0 + 3eda: b1 e0 ldi r27, 0x01 ; 1 + ch = SPM_PAGESIZE / 2; + do { + uint16_t a; + a = *bufPtr++; + 3edc: 2c 91 ld r18, X + 3ede: 30 e0 ldi r19, 0x00 ; 0 + a |= (*bufPtr++) << 8; + 3ee0: 11 96 adiw r26, 0x01 ; 1 + 3ee2: 8c 91 ld r24, X + 3ee4: 11 97 sbiw r26, 0x01 ; 1 + 3ee6: 90 e0 ldi r25, 0x00 ; 0 + 3ee8: 98 2f mov r25, r24 + 3eea: 88 27 eor r24, r24 + 3eec: 82 2b or r24, r18 + 3eee: 93 2b or r25, r19 +#ifdef VIRTUAL_BOOT_PARTITION +#define rstVect (*(uint16_t*)(0x204)) +#define wdtVect (*(uint16_t*)(0x206)) +#endif +/* main program starts here */ +int main(void) { + 3ef0: 12 96 adiw r26, 0x02 ; 2 + ch = SPM_PAGESIZE / 2; + do { + uint16_t a; + a = *bufPtr++; + a |= (*bufPtr++) << 8; + boot_page_fill((uint16_t)(void*)addrPtr,a); + 3ef2: fa 01 movw r30, r20 + 3ef4: 0c 01 movw r0, r24 + 3ef6: d0 92 57 00 sts 0x0057, r13 + 3efa: e8 95 spm + 3efc: 11 24 eor r1, r1 + addrPtr += 2; + 3efe: 4e 5f subi r20, 0xFE ; 254 + 3f00: 5f 4f sbci r21, 0xFF ; 255 + } while (--ch); + 3f02: f1 e0 ldi r31, 0x01 ; 1 + 3f04: a0 38 cpi r26, 0x80 ; 128 + 3f06: bf 07 cpc r27, r31 + 3f08: 49 f7 brne .-46 ; 0x3edc + + // Write from programming buffer + boot_page_write((uint16_t)(void*)address); + 3f0a: e0 91 00 02 lds r30, 0x0200 + 3f0e: f0 91 01 02 lds r31, 0x0201 + 3f12: e0 92 57 00 sts 0x0057, r14 + 3f16: e8 95 spm + boot_spm_busy_wait(); + 3f18: 07 b6 in r0, 0x37 ; 55 + 3f1a: 00 fc sbrc r0, 0 + 3f1c: fd cf rjmp .-6 ; 0x3f18 + +#if defined(RWWSRE) + // Reenable read access to flash + boot_rww_enable(); + 3f1e: f0 92 57 00 sts 0x0057, r15 + 3f22: e8 95 spm + 3f24: 27 c0 rjmp .+78 ; 0x3f74 +#endif + + } + /* Read memory block mode, length is big endian. */ + else if(ch == STK_READ_PAGE) { + 3f26: 84 37 cpi r24, 0x74 ; 116 + 3f28: b9 f4 brne .+46 ; 0x3f58 + // READ PAGE - we only read flash + getLen(); + 3f2a: 4a d0 rcall .+148 ; 0x3fc0 + verifySpace(); + 3f2c: 59 d0 rcall .+178 ; 0x3fe0 + else ch = pgm_read_byte_near(address); + address++; + putch(ch); + } while (--length); +#else + do putch(pgm_read_byte_near(address++)); + 3f2e: e0 91 00 02 lds r30, 0x0200 + 3f32: f0 91 01 02 lds r31, 0x0201 + 3f36: 31 96 adiw r30, 0x01 ; 1 + 3f38: f0 93 01 02 sts 0x0201, r31 + 3f3c: e0 93 00 02 sts 0x0200, r30 + 3f40: 31 97 sbiw r30, 0x01 ; 1 + 3f42: e4 91 lpm r30, Z+ + 3f44: 8e 2f mov r24, r30 + 3f46: 19 d0 rcall .+50 ; 0x3f7a + while (--length); + 3f48: 80 91 02 02 lds r24, 0x0202 + 3f4c: 81 50 subi r24, 0x01 ; 1 + 3f4e: 80 93 02 02 sts 0x0202, r24 + 3f52: 88 23 and r24, r24 + 3f54: 61 f7 brne .-40 ; 0x3f2e + 3f56: 0e c0 rjmp .+28 ; 0x3f74 +#endif + } + + /* Get device signature bytes */ + else if(ch == STK_READ_SIGN) { + 3f58: 85 37 cpi r24, 0x75 ; 117 + 3f5a: 39 f4 brne .+14 ; 0x3f6a + // READ SIGN - return what Avrdude wants to hear + verifySpace(); + 3f5c: 41 d0 rcall .+130 ; 0x3fe0 + putch(SIGNATURE_0); + 3f5e: 8e e1 ldi r24, 0x1E ; 30 + 3f60: 0c d0 rcall .+24 ; 0x3f7a + putch(SIGNATURE_1); + 3f62: 84 e9 ldi r24, 0x94 ; 148 + 3f64: 0a d0 rcall .+20 ; 0x3f7a + putch(SIGNATURE_2); + 3f66: 86 e0 ldi r24, 0x06 ; 6 + 3f68: 96 cf rjmp .-212 ; 0x3e96 + } + else if (ch == 'Q') { + 3f6a: 81 35 cpi r24, 0x51 ; 81 + 3f6c: 11 f4 brne .+4 ; 0x3f72 + // Adaboot no-wait mod + watchdogConfig(WATCHDOG_16MS); + 3f6e: 88 e0 ldi r24, 0x08 ; 8 + 3f70: 2c d0 rcall .+88 ; 0x3fca + verifySpace(); + } + else { + // This covers the response to commands like STK_ENTER_PROGMODE + verifySpace(); + 3f72: 36 d0 rcall .+108 ; 0x3fe0 + } + putch(STK_OK); + 3f74: 80 e1 ldi r24, 0x10 ; 16 + 3f76: 01 d0 rcall .+2 ; 0x3f7a + 3f78: 63 cf rjmp .-314 ; 0x3e40 + +00003f7a : +void putch(char ch) { +#ifndef SOFT_UART + while (!(UCSR0A & _BV(UDRE0))); + UDR0 = ch; +#else + __asm__ __volatile__ ( + 3f7a: 2a e0 ldi r18, 0x0A ; 10 + 3f7c: 30 e0 ldi r19, 0x00 ; 0 + 3f7e: 80 95 com r24 + 3f80: 08 94 sec + 3f82: 10 f4 brcc .+4 ; 0x3f88 + 3f84: 59 98 cbi 0x0b, 1 ; 11 + 3f86: 02 c0 rjmp .+4 ; 0x3f8c + 3f88: 59 9a sbi 0x0b, 1 ; 11 + 3f8a: 00 00 nop + 3f8c: 15 d0 rcall .+42 ; 0x3fb8 + 3f8e: 14 d0 rcall .+40 ; 0x3fb8 + 3f90: 86 95 lsr r24 + 3f92: 2a 95 dec r18 + 3f94: b1 f7 brne .-20 ; 0x3f82 + [uartBit] "I" (UART_TX_BIT) + : + "r25" + ); +#endif +} + 3f96: 08 95 ret + +00003f98 : + return getch(); +} + +// Watchdog functions. These are only safe with interrupts turned off. +void watchdogReset() { + __asm__ __volatile__ ( + 3f98: a8 95 wdr +#ifdef LED_DATA_FLASH + LED_PIN |= _BV(LED); +#endif + + return ch; +} + 3f9a: 29 e0 ldi r18, 0x09 ; 9 + 3f9c: 30 e0 ldi r19, 0x00 ; 0 + 3f9e: 48 99 sbic 0x09, 0 ; 9 + 3fa0: fe cf rjmp .-4 ; 0x3f9e + 3fa2: 0a d0 rcall .+20 ; 0x3fb8 + 3fa4: 09 d0 rcall .+18 ; 0x3fb8 + 3fa6: 08 d0 rcall .+16 ; 0x3fb8 + 3fa8: 88 94 clc + 3faa: 48 99 sbic 0x09, 0 ; 9 + 3fac: 08 94 sec + 3fae: 2a 95 dec r18 + 3fb0: 11 f0 breq .+4 ; 0x3fb6 + 3fb2: 87 95 ror r24 + 3fb4: f7 cf rjmp .-18 ; 0x3fa4 + 3fb6: 08 95 ret + +00003fb8 : +#if UART_B_VALUE > 255 +#error Baud rate too slow for soft UART +#endif + +void uartDelay() { + __asm__ __volatile__ ( + 3fb8: 98 e0 ldi r25, 0x08 ; 8 + 3fba: 9a 95 dec r25 + 3fbc: f1 f7 brne .-4 ; 0x3fba + 3fbe: 08 95 ret + +00003fc0 : + } while (--count); +} +#endif + +uint8_t getLen() { + getch(); + 3fc0: eb df rcall .-42 ; 0x3f98 + length = getch(); + 3fc2: ea df rcall .-44 ; 0x3f98 + 3fc4: 80 93 02 02 sts 0x0202, r24 + return getch(); +} + 3fc8: e7 cf rjmp .-50 ; 0x3f98 + +00003fca : + "wdr\n" + ); +} + +void watchdogConfig(uint8_t x) { + WDTCSR = _BV(WDCE) | _BV(WDE); + 3fca: e0 e6 ldi r30, 0x60 ; 96 + 3fcc: f0 e0 ldi r31, 0x00 ; 0 + 3fce: 98 e1 ldi r25, 0x18 ; 24 + 3fd0: 90 83 st Z, r25 + WDTCSR = x; + 3fd2: 80 83 st Z, r24 +} + 3fd4: 08 95 ret + +00003fd6 : + +void appStart() { + watchdogConfig(WATCHDOG_OFF); + 3fd6: 80 e0 ldi r24, 0x00 ; 0 + 3fd8: f8 df rcall .-16 ; 0x3fca + __asm__ __volatile__ ( + 3fda: ee 27 eor r30, r30 + 3fdc: ff 27 eor r31, r31 + 3fde: 09 94 ijmp + +00003fe0 : + do getch(); while (--count); + verifySpace(); +} + +void verifySpace() { + if (getch() != CRC_EOP) appStart(); + 3fe0: db df rcall .-74 ; 0x3f98 + 3fe2: 80 32 cpi r24, 0x20 ; 32 + 3fe4: 09 f0 breq .+2 ; 0x3fe8 + 3fe6: f7 df rcall .-18 ; 0x3fd6 + putch(STK_INSYNC); + 3fe8: 84 e1 ldi r24, 0x14 ; 20 +} + 3fea: c7 cf rjmp .-114 ; 0x3f7a + ::[count] "M" (UART_B_VALUE) + ); +} +#endif + +void getNch(uint8_t count) { + 3fec: 1f 93 push r17 + 3fee: 18 2f mov r17, r24 + +00003ff0 : + do getch(); while (--count); + 3ff0: d3 df rcall .-90 ; 0x3f98 + 3ff2: 11 50 subi r17, 0x01 ; 1 + 3ff4: e9 f7 brne .-6 ; 0x3ff0 + verifySpace(); + 3ff6: f4 df rcall .-24 ; 0x3fe0 +} + 3ff8: 1f 91 pop r17 + 3ffa: 08 95 ret diff --git a/test/ardmake/hardware/bootloaders/optiboot/optiboot_luminet.hex b/test/ardmake/hardware/bootloaders/optiboot/optiboot_luminet.hex new file mode 100644 index 0000000..0e51124 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/optiboot/optiboot_luminet.hex @@ -0,0 +1,42 @@ +:101D000085E08EBD84B714BE81FF27D18DE021D13F +:101D1000D49AD29A86E023EC3FEF91E03DBD2CBDF2 +:101D20009BB9589BFECFCC9AA8958150B9F7CC248B +:101D3000C39485E0E82E0FE7D02E1EECF12EF0D0F4 +:101D4000813421F481E014D183E024C0823411F481 +:101D500084E103C0853419F485E00AD1CFC085350C +:101D6000A1F4DED0082F10E01093010200930002CE +:101D7000D7D090E0982F8827802B912B880F991F20 +:101D80009093010280930002B8C0863529F484E064 +:101D9000EFD080E0B6D0B2C0843609F06EC0D4D0A7 +:101DA000E0910002F091010283E080935700E895F2 +:101DB000C0E0D1E0B5D08993809102028150809338 +:101DC00002028823B9F7CED007B600FCFDCF809180 +:101DD000000290910102892B41F580910001209130 +:101DE000010130E0322F222790E0282B392B30934D +:101DF00005022093040240910A0180910B0190E0BA +:101E0000982F882750E0842B952B9093070280937E +:101E100006022450304020930A01232F33272093B9 +:101E20000B01D0920001F09201014091000250910B +:101E30000102A0E0B1E02C9130E011968C91119755 +:101E400090E0982F8827822B932B1296FA010C0191 +:101E5000C0925700E89511244E5F5F4FF1E0A03427 +:101E6000BF0749F7E0910002F0910102E0925700AC +:101E7000E89507B600FCFDCF41C0843789F564D0F2 +:101E800071D0E0910002F0910102309719F4209195 +:101E9000040213C0E130F10519F4209105020DC0D0 +:101EA000EA30F10519F42091060207C0EB30F10584 +:101EB00019F42091070201C02491809100029091B1 +:101EC000010201969093010280930002822F19D0A3 +:101ED00080910202815080930202882391F60EC005 +:101EE000853739F43FD08EE10CD083E90AD08CE0FD +:101EF00051CF813511F488E02CD034D080E101D06D +:101F00001ECF2AE030E08095089410F4DA9802C0E1 +:101F1000DA9A000015D014D086952A95B1F7089565 +:101F2000A89529E030E0CB99FECF0AD009D008D09F +:101F30008894CB9908942A9511F08795F7CF089546 +:101F40009EE09A95F1F70895EBDFEADF80930202B5 +:101F5000E7CF98E191BD81BD089580E0FADFE5E02B +:101F6000FF270994DDDF803209F0F7DF84E1C9CF74 +:101F70001F93182FD5DF1150E9F7F4DF1F91089553 +:0400000300001D00DC +:00000001FF diff --git a/test/ardmake/hardware/bootloaders/optiboot/optiboot_luminet.lst b/test/ardmake/hardware/bootloaders/optiboot/optiboot_luminet.lst new file mode 100644 index 0000000..59468cb --- /dev/null +++ b/test/ardmake/hardware/bootloaders/optiboot/optiboot_luminet.lst @@ -0,0 +1,604 @@ + +optiboot_luminet.elf: file format elf32-avr + +Sections: +Idx Name Size VMA LMA File off Algn + 0 .text 00000280 00001d00 00001d00 00000054 2**1 + CONTENTS, ALLOC, LOAD, READONLY, CODE + 1 .debug_aranges 00000028 00000000 00000000 000002d4 2**0 + CONTENTS, READONLY, DEBUGGING + 2 .debug_pubnames 00000078 00000000 00000000 000002fc 2**0 + CONTENTS, READONLY, DEBUGGING + 3 .debug_info 00000289 00000000 00000000 00000374 2**0 + CONTENTS, READONLY, DEBUGGING + 4 .debug_abbrev 000001a1 00000000 00000000 000005fd 2**0 + CONTENTS, READONLY, DEBUGGING + 5 .debug_line 00000435 00000000 00000000 0000079e 2**0 + CONTENTS, READONLY, DEBUGGING + 6 .debug_frame 000000a0 00000000 00000000 00000bd4 2**2 + CONTENTS, READONLY, DEBUGGING + 7 .debug_str 00000144 00000000 00000000 00000c74 2**0 + CONTENTS, READONLY, DEBUGGING + 8 .debug_loc 00000194 00000000 00000000 00000db8 2**0 + CONTENTS, READONLY, DEBUGGING + 9 .debug_ranges 00000088 00000000 00000000 00000f4c 2**0 + CONTENTS, READONLY, DEBUGGING + +Disassembly of section .text: + +00001d00
: +#ifdef VIRTUAL_BOOT_PARTITION +#define rstVect (*(uint16_t*)(0x204)) +#define wdtVect (*(uint16_t*)(0x206)) +#endif +/* main program starts here */ +int main(void) { + 1d00: 85 e0 ldi r24, 0x05 ; 5 + 1d02: 8e bd out 0x2e, r24 ; 46 + UCSR0C = _BV(UCSZ00) | _BV(UCSZ01); + UBRR0L = (uint8_t)( (F_CPU + BAUD_RATE * 4L) / (BAUD_RATE * 8L) - 1 ); +#endif + + // Adaboot no-wait mod + ch = MCUSR; + 1d04: 84 b7 in r24, 0x34 ; 52 + MCUSR = 0; + 1d06: 14 be out 0x34, r1 ; 52 + if (!(ch & _BV(EXTRF))) appStart(); + 1d08: 81 ff sbrs r24, 1 + 1d0a: 27 d1 rcall .+590 ; 0x1f5a + + // Set up watchdog to trigger after 500ms + watchdogConfig(WATCHDOG_500MS); + 1d0c: 8d e0 ldi r24, 0x0D ; 13 + 1d0e: 21 d1 rcall .+578 ; 0x1f52 + + /* Set LED pin as output */ + LED_DDR |= _BV(LED); + 1d10: d4 9a sbi 0x1a, 4 ; 26 + +#ifdef SOFT_UART + /* Set TX pin as output */ + UART_DDR |= _BV(UART_TX_BIT); + 1d12: d2 9a sbi 0x1a, 2 ; 26 + 1d14: 86 e0 ldi r24, 0x06 ; 6 +} + +#if LED_START_FLASHES > 0 +void flash_led(uint8_t count) { + do { + TCNT1 = -(F_CPU/(1024*16)); + 1d16: 23 ec ldi r18, 0xC3 ; 195 + 1d18: 3f ef ldi r19, 0xFF ; 255 + TIFR1 = _BV(TOV1); + 1d1a: 91 e0 ldi r25, 0x01 ; 1 +} + +#if LED_START_FLASHES > 0 +void flash_led(uint8_t count) { + do { + TCNT1 = -(F_CPU/(1024*16)); + 1d1c: 3d bd out 0x2d, r19 ; 45 + 1d1e: 2c bd out 0x2c, r18 ; 44 + TIFR1 = _BV(TOV1); + 1d20: 9b b9 out 0x0b, r25 ; 11 + while(!(TIFR1 & _BV(TOV1))); + 1d22: 58 9b sbis 0x0b, 0 ; 11 + 1d24: fe cf rjmp .-4 ; 0x1d22 + LED_PIN |= _BV(LED); + 1d26: cc 9a sbi 0x19, 4 ; 25 + return getch(); +} + +// Watchdog functions. These are only safe with interrupts turned off. +void watchdogReset() { + __asm__ __volatile__ ( + 1d28: a8 95 wdr + TCNT1 = -(F_CPU/(1024*16)); + TIFR1 = _BV(TOV1); + while(!(TIFR1 & _BV(TOV1))); + LED_PIN |= _BV(LED); + watchdogReset(); + } while (--count); + 1d2a: 81 50 subi r24, 0x01 ; 1 + 1d2c: b9 f7 brne .-18 ; 0x1d1c + /* get character from UART */ + ch = getch(); + + if(ch == STK_GET_PARAMETER) { + // GET PARAMETER returns a generic 0x03 reply - enough to keep Avrdude happy + getNch(1); + 1d2e: cc 24 eor r12, r12 + 1d30: c3 94 inc r12 + boot_page_fill((uint16_t)(void*)addrPtr,a); + addrPtr += 2; + } while (--ch); + + // Write from programming buffer + boot_page_write((uint16_t)(void*)address); + 1d32: 85 e0 ldi r24, 0x05 ; 5 + 1d34: e8 2e mov r14, r24 + vect -= 4; // Instruction is a relative jump (rjmp), so recalculate. + buff[10] = vect & 0xff; + buff[11] = vect >> 8; + + // Add jump to bootloader at RESET vector + buff[0] = 0x7f; + 1d36: 0f e7 ldi r16, 0x7F ; 127 + 1d38: d0 2e mov r13, r16 + buff[1] = 0xce; // rjmp 0x1d00 instruction + 1d3a: 1e ec ldi r17, 0xCE ; 206 + 1d3c: f1 2e mov r15, r17 +#endif + + /* Forever loop */ + for (;;) { + /* get character from UART */ + ch = getch(); + 1d3e: f0 d0 rcall .+480 ; 0x1f20 + + if(ch == STK_GET_PARAMETER) { + 1d40: 81 34 cpi r24, 0x41 ; 65 + 1d42: 21 f4 brne .+8 ; 0x1d4c + // GET PARAMETER returns a generic 0x03 reply - enough to keep Avrdude happy + getNch(1); + 1d44: 81 e0 ldi r24, 0x01 ; 1 + 1d46: 14 d1 rcall .+552 ; 0x1f70 + putch(0x03); + 1d48: 83 e0 ldi r24, 0x03 ; 3 + 1d4a: 24 c0 rjmp .+72 ; 0x1d94 + } + else if(ch == STK_SET_DEVICE) { + 1d4c: 82 34 cpi r24, 0x42 ; 66 + 1d4e: 11 f4 brne .+4 ; 0x1d54 + // SET DEVICE is ignored + getNch(20); + 1d50: 84 e1 ldi r24, 0x14 ; 20 + 1d52: 03 c0 rjmp .+6 ; 0x1d5a + } + else if(ch == STK_SET_DEVICE_EXT) { + 1d54: 85 34 cpi r24, 0x45 ; 69 + 1d56: 19 f4 brne .+6 ; 0x1d5e + // SET DEVICE EXT is ignored + getNch(5); + 1d58: 85 e0 ldi r24, 0x05 ; 5 + 1d5a: 0a d1 rcall .+532 ; 0x1f70 + 1d5c: cf c0 rjmp .+414 ; 0x1efc + } + else if(ch == STK_LOAD_ADDRESS) { + 1d5e: 85 35 cpi r24, 0x55 ; 85 + 1d60: a1 f4 brne .+40 ; 0x1d8a + // LOAD ADDRESS + address = getch(); + 1d62: de d0 rcall .+444 ; 0x1f20 + 1d64: 08 2f mov r16, r24 + 1d66: 10 e0 ldi r17, 0x00 ; 0 + 1d68: 10 93 01 02 sts 0x0201, r17 + 1d6c: 00 93 00 02 sts 0x0200, r16 + address = (address & 0xff) | (getch() << 8); + 1d70: d7 d0 rcall .+430 ; 0x1f20 + 1d72: 90 e0 ldi r25, 0x00 ; 0 + 1d74: 98 2f mov r25, r24 + 1d76: 88 27 eor r24, r24 + 1d78: 80 2b or r24, r16 + 1d7a: 91 2b or r25, r17 + address += address; // Convert from word address to byte address + 1d7c: 88 0f add r24, r24 + 1d7e: 99 1f adc r25, r25 + 1d80: 90 93 01 02 sts 0x0201, r25 + 1d84: 80 93 00 02 sts 0x0200, r24 + 1d88: b8 c0 rjmp .+368 ; 0x1efa + verifySpace(); + } + else if(ch == STK_UNIVERSAL) { + 1d8a: 86 35 cpi r24, 0x56 ; 86 + 1d8c: 29 f4 brne .+10 ; 0x1d98 + // UNIVERSAL command is ignored + getNch(4); + 1d8e: 84 e0 ldi r24, 0x04 ; 4 + 1d90: ef d0 rcall .+478 ; 0x1f70 + putch(0x00); + 1d92: 80 e0 ldi r24, 0x00 ; 0 + 1d94: b6 d0 rcall .+364 ; 0x1f02 + 1d96: b2 c0 rjmp .+356 ; 0x1efc + } + /* Write memory, length is big endian and is in bytes */ + else if(ch == STK_PROG_PAGE) { + 1d98: 84 36 cpi r24, 0x64 ; 100 + 1d9a: 09 f0 breq .+2 ; 0x1d9e + 1d9c: 6e c0 rjmp .+220 ; 0x1e7a + // PROGRAM PAGE - we support flash programming only, not EEPROM + uint8_t *bufPtr; + uint16_t addrPtr; + + getLen(); + 1d9e: d4 d0 rcall .+424 ; 0x1f48 + + // Immediately start page erase - this will 4.5ms + boot_page_erase((uint16_t)(void*)address); + 1da0: e0 91 00 02 lds r30, 0x0200 + 1da4: f0 91 01 02 lds r31, 0x0201 + 1da8: 83 e0 ldi r24, 0x03 ; 3 + 1daa: 80 93 57 00 sts 0x0057, r24 + 1dae: e8 95 spm + 1db0: c0 e0 ldi r28, 0x00 ; 0 + 1db2: d1 e0 ldi r29, 0x01 ; 1 + + // While that is going on, read in page contents + bufPtr = buff; + do *bufPtr++ = getch(); + 1db4: b5 d0 rcall .+362 ; 0x1f20 + 1db6: 89 93 st Y+, r24 + while (--length); + 1db8: 80 91 02 02 lds r24, 0x0202 + 1dbc: 81 50 subi r24, 0x01 ; 1 + 1dbe: 80 93 02 02 sts 0x0202, r24 + 1dc2: 88 23 and r24, r24 + 1dc4: b9 f7 brne .-18 ; 0x1db4 + + // Read command terminator, start reply + verifySpace(); + 1dc6: ce d0 rcall .+412 ; 0x1f64 + + // If only a partial page is to be programmed, the erase might not be complete. + // So check that here + boot_spm_busy_wait(); + 1dc8: 07 b6 in r0, 0x37 ; 55 + 1dca: 00 fc sbrc r0, 0 + 1dcc: fd cf rjmp .-6 ; 0x1dc8 + +#ifdef VIRTUAL_BOOT_PARTITION + if ((uint16_t)(void*)address == 0) { + 1dce: 80 91 00 02 lds r24, 0x0200 + 1dd2: 90 91 01 02 lds r25, 0x0201 + 1dd6: 89 2b or r24, r25 + 1dd8: 41 f5 brne .+80 ; 0x1e2a + // This is the reset vector page. We need to live-patch the code so the + // bootloader runs. + // + // Move RESET vector to WDT vector + uint16_t vect = buff[0] | (buff[1]<<8); + 1dda: 80 91 00 01 lds r24, 0x0100 + 1dde: 20 91 01 01 lds r18, 0x0101 + 1de2: 30 e0 ldi r19, 0x00 ; 0 + 1de4: 32 2f mov r19, r18 + 1de6: 22 27 eor r18, r18 + 1de8: 90 e0 ldi r25, 0x00 ; 0 + 1dea: 28 2b or r18, r24 + 1dec: 39 2b or r19, r25 + rstVect = vect; + 1dee: 30 93 05 02 sts 0x0205, r19 + 1df2: 20 93 04 02 sts 0x0204, r18 + wdtVect = buff[10] | (buff[11]<<8); + 1df6: 40 91 0a 01 lds r20, 0x010A + 1dfa: 80 91 0b 01 lds r24, 0x010B + 1dfe: 90 e0 ldi r25, 0x00 ; 0 + 1e00: 98 2f mov r25, r24 + 1e02: 88 27 eor r24, r24 + 1e04: 50 e0 ldi r21, 0x00 ; 0 + 1e06: 84 2b or r24, r20 + 1e08: 95 2b or r25, r21 + 1e0a: 90 93 07 02 sts 0x0207, r25 + 1e0e: 80 93 06 02 sts 0x0206, r24 + vect -= 4; // Instruction is a relative jump (rjmp), so recalculate. + 1e12: 24 50 subi r18, 0x04 ; 4 + 1e14: 30 40 sbci r19, 0x00 ; 0 + buff[10] = vect & 0xff; + 1e16: 20 93 0a 01 sts 0x010A, r18 + buff[11] = vect >> 8; + 1e1a: 23 2f mov r18, r19 + 1e1c: 33 27 eor r19, r19 + 1e1e: 20 93 0b 01 sts 0x010B, r18 + + // Add jump to bootloader at RESET vector + buff[0] = 0x7f; + 1e22: d0 92 00 01 sts 0x0100, r13 + buff[1] = 0xce; // rjmp 0x1d00 instruction + 1e26: f0 92 01 01 sts 0x0101, r15 + } +#endif + + // Copy buffer into programming buffer + bufPtr = buff; + addrPtr = (uint16_t)(void*)address; + 1e2a: 40 91 00 02 lds r20, 0x0200 + 1e2e: 50 91 01 02 lds r21, 0x0201 + 1e32: a0 e0 ldi r26, 0x00 ; 0 + 1e34: b1 e0 ldi r27, 0x01 ; 1 + ch = SPM_PAGESIZE / 2; + do { + uint16_t a; + a = *bufPtr++; + 1e36: 2c 91 ld r18, X + 1e38: 30 e0 ldi r19, 0x00 ; 0 + a |= (*bufPtr++) << 8; + 1e3a: 11 96 adiw r26, 0x01 ; 1 + 1e3c: 8c 91 ld r24, X + 1e3e: 11 97 sbiw r26, 0x01 ; 1 + 1e40: 90 e0 ldi r25, 0x00 ; 0 + 1e42: 98 2f mov r25, r24 + 1e44: 88 27 eor r24, r24 + 1e46: 82 2b or r24, r18 + 1e48: 93 2b or r25, r19 +#ifdef VIRTUAL_BOOT_PARTITION +#define rstVect (*(uint16_t*)(0x204)) +#define wdtVect (*(uint16_t*)(0x206)) +#endif +/* main program starts here */ +int main(void) { + 1e4a: 12 96 adiw r26, 0x02 ; 2 + ch = SPM_PAGESIZE / 2; + do { + uint16_t a; + a = *bufPtr++; + a |= (*bufPtr++) << 8; + boot_page_fill((uint16_t)(void*)addrPtr,a); + 1e4c: fa 01 movw r30, r20 + 1e4e: 0c 01 movw r0, r24 + 1e50: c0 92 57 00 sts 0x0057, r12 + 1e54: e8 95 spm + 1e56: 11 24 eor r1, r1 + addrPtr += 2; + 1e58: 4e 5f subi r20, 0xFE ; 254 + 1e5a: 5f 4f sbci r21, 0xFF ; 255 + } while (--ch); + 1e5c: f1 e0 ldi r31, 0x01 ; 1 + 1e5e: a0 34 cpi r26, 0x40 ; 64 + 1e60: bf 07 cpc r27, r31 + 1e62: 49 f7 brne .-46 ; 0x1e36 + + // Write from programming buffer + boot_page_write((uint16_t)(void*)address); + 1e64: e0 91 00 02 lds r30, 0x0200 + 1e68: f0 91 01 02 lds r31, 0x0201 + 1e6c: e0 92 57 00 sts 0x0057, r14 + 1e70: e8 95 spm + boot_spm_busy_wait(); + 1e72: 07 b6 in r0, 0x37 ; 55 + 1e74: 00 fc sbrc r0, 0 + 1e76: fd cf rjmp .-6 ; 0x1e72 + 1e78: 41 c0 rjmp .+130 ; 0x1efc + boot_rww_enable(); +#endif + + } + /* Read memory block mode, length is big endian. */ + else if(ch == STK_READ_PAGE) { + 1e7a: 84 37 cpi r24, 0x74 ; 116 + 1e7c: 89 f5 brne .+98 ; 0x1ee0 + // READ PAGE - we only read flash + getLen(); + 1e7e: 64 d0 rcall .+200 ; 0x1f48 + verifySpace(); + 1e80: 71 d0 rcall .+226 ; 0x1f64 +#ifdef VIRTUAL_BOOT_PARTITION + do { + // Undo vector patch in bottom page so verify passes + if (address == 0) ch=rstVect & 0xff; + 1e82: e0 91 00 02 lds r30, 0x0200 + 1e86: f0 91 01 02 lds r31, 0x0201 + 1e8a: 30 97 sbiw r30, 0x00 ; 0 + 1e8c: 19 f4 brne .+6 ; 0x1e94 + 1e8e: 20 91 04 02 lds r18, 0x0204 + 1e92: 13 c0 rjmp .+38 ; 0x1eba + else if (address == 1) ch=rstVect >> 8; + 1e94: e1 30 cpi r30, 0x01 ; 1 + 1e96: f1 05 cpc r31, r1 + 1e98: 19 f4 brne .+6 ; 0x1ea0 + 1e9a: 20 91 05 02 lds r18, 0x0205 + 1e9e: 0d c0 rjmp .+26 ; 0x1eba + else if (address == 10) ch=wdtVect & 0xff; + 1ea0: ea 30 cpi r30, 0x0A ; 10 + 1ea2: f1 05 cpc r31, r1 + 1ea4: 19 f4 brne .+6 ; 0x1eac + 1ea6: 20 91 06 02 lds r18, 0x0206 + 1eaa: 07 c0 rjmp .+14 ; 0x1eba + else if (address == 11) ch=wdtVect >> 8; + 1eac: eb 30 cpi r30, 0x0B ; 11 + 1eae: f1 05 cpc r31, r1 + 1eb0: 19 f4 brne .+6 ; 0x1eb8 + 1eb2: 20 91 07 02 lds r18, 0x0207 + 1eb6: 01 c0 rjmp .+2 ; 0x1eba + else ch = pgm_read_byte_near(address); + 1eb8: 24 91 lpm r18, Z+ + address++; + 1eba: 80 91 00 02 lds r24, 0x0200 + 1ebe: 90 91 01 02 lds r25, 0x0201 + 1ec2: 01 96 adiw r24, 0x01 ; 1 + 1ec4: 90 93 01 02 sts 0x0201, r25 + 1ec8: 80 93 00 02 sts 0x0200, r24 + putch(ch); + 1ecc: 82 2f mov r24, r18 + 1ece: 19 d0 rcall .+50 ; 0x1f02 + } while (--length); + 1ed0: 80 91 02 02 lds r24, 0x0202 + 1ed4: 81 50 subi r24, 0x01 ; 1 + 1ed6: 80 93 02 02 sts 0x0202, r24 + 1eda: 88 23 and r24, r24 + 1edc: 91 f6 brne .-92 ; 0x1e82 + 1ede: 0e c0 rjmp .+28 ; 0x1efc + while (--length); +#endif + } + + /* Get device signature bytes */ + else if(ch == STK_READ_SIGN) { + 1ee0: 85 37 cpi r24, 0x75 ; 117 + 1ee2: 39 f4 brne .+14 ; 0x1ef2 + // READ SIGN - return what Avrdude wants to hear + verifySpace(); + 1ee4: 3f d0 rcall .+126 ; 0x1f64 + putch(SIGNATURE_0); + 1ee6: 8e e1 ldi r24, 0x1E ; 30 + 1ee8: 0c d0 rcall .+24 ; 0x1f02 + putch(SIGNATURE_1); + 1eea: 83 e9 ldi r24, 0x93 ; 147 + 1eec: 0a d0 rcall .+20 ; 0x1f02 + putch(SIGNATURE_2); + 1eee: 8c e0 ldi r24, 0x0C ; 12 + 1ef0: 51 cf rjmp .-350 ; 0x1d94 + } + else if (ch == 'Q') { + 1ef2: 81 35 cpi r24, 0x51 ; 81 + 1ef4: 11 f4 brne .+4 ; 0x1efa + // Adaboot no-wait mod + watchdogConfig(WATCHDOG_16MS); + 1ef6: 88 e0 ldi r24, 0x08 ; 8 + 1ef8: 2c d0 rcall .+88 ; 0x1f52 + verifySpace(); + } + else { + // This covers the response to commands like STK_ENTER_PROGMODE + verifySpace(); + 1efa: 34 d0 rcall .+104 ; 0x1f64 + } + putch(STK_OK); + 1efc: 80 e1 ldi r24, 0x10 ; 16 + 1efe: 01 d0 rcall .+2 ; 0x1f02 + 1f00: 1e cf rjmp .-452 ; 0x1d3e + +00001f02 : +void putch(char ch) { +#ifndef SOFT_UART + while (!(UCSR0A & _BV(UDRE0))); + UDR0 = ch; +#else + __asm__ __volatile__ ( + 1f02: 2a e0 ldi r18, 0x0A ; 10 + 1f04: 30 e0 ldi r19, 0x00 ; 0 + 1f06: 80 95 com r24 + 1f08: 08 94 sec + 1f0a: 10 f4 brcc .+4 ; 0x1f10 + 1f0c: da 98 cbi 0x1b, 2 ; 27 + 1f0e: 02 c0 rjmp .+4 ; 0x1f14 + 1f10: da 9a sbi 0x1b, 2 ; 27 + 1f12: 00 00 nop + 1f14: 15 d0 rcall .+42 ; 0x1f40 + 1f16: 14 d0 rcall .+40 ; 0x1f40 + 1f18: 86 95 lsr r24 + 1f1a: 2a 95 dec r18 + 1f1c: b1 f7 brne .-20 ; 0x1f0a + [uartBit] "I" (UART_TX_BIT) + : + "r25" + ); +#endif +} + 1f1e: 08 95 ret + +00001f20 : + return getch(); +} + +// Watchdog functions. These are only safe with interrupts turned off. +void watchdogReset() { + __asm__ __volatile__ ( + 1f20: a8 95 wdr +#ifdef LED_DATA_FLASH + LED_PIN |= _BV(LED); +#endif + + return ch; +} + 1f22: 29 e0 ldi r18, 0x09 ; 9 + 1f24: 30 e0 ldi r19, 0x00 ; 0 + 1f26: cb 99 sbic 0x19, 3 ; 25 + 1f28: fe cf rjmp .-4 ; 0x1f26 + 1f2a: 0a d0 rcall .+20 ; 0x1f40 + 1f2c: 09 d0 rcall .+18 ; 0x1f40 + 1f2e: 08 d0 rcall .+16 ; 0x1f40 + 1f30: 88 94 clc + 1f32: cb 99 sbic 0x19, 3 ; 25 + 1f34: 08 94 sec + 1f36: 2a 95 dec r18 + 1f38: 11 f0 breq .+4 ; 0x1f3e + 1f3a: 87 95 ror r24 + 1f3c: f7 cf rjmp .-18 ; 0x1f2c + 1f3e: 08 95 ret + +00001f40 : +#if UART_B_VALUE > 255 +#error Baud rate too slow for soft UART +#endif + +void uartDelay() { + __asm__ __volatile__ ( + 1f40: 9e e0 ldi r25, 0x0E ; 14 + 1f42: 9a 95 dec r25 + 1f44: f1 f7 brne .-4 ; 0x1f42 + 1f46: 08 95 ret + +00001f48 : + } while (--count); +} +#endif + +uint8_t getLen() { + getch(); + 1f48: eb df rcall .-42 ; 0x1f20 + length = getch(); + 1f4a: ea df rcall .-44 ; 0x1f20 + 1f4c: 80 93 02 02 sts 0x0202, r24 + return getch(); +} + 1f50: e7 cf rjmp .-50 ; 0x1f20 + +00001f52 : + "wdr\n" + ); +} + +void watchdogConfig(uint8_t x) { + WDTCSR = _BV(WDCE) | _BV(WDE); + 1f52: 98 e1 ldi r25, 0x18 ; 24 + 1f54: 91 bd out 0x21, r25 ; 33 + WDTCSR = x; + 1f56: 81 bd out 0x21, r24 ; 33 +} + 1f58: 08 95 ret + +00001f5a : + +void appStart() { + watchdogConfig(WATCHDOG_OFF); + 1f5a: 80 e0 ldi r24, 0x00 ; 0 + 1f5c: fa df rcall .-12 ; 0x1f52 + __asm__ __volatile__ ( + 1f5e: e5 e0 ldi r30, 0x05 ; 5 + 1f60: ff 27 eor r31, r31 + 1f62: 09 94 ijmp + +00001f64 : + do getch(); while (--count); + verifySpace(); +} + +void verifySpace() { + if (getch() != CRC_EOP) appStart(); + 1f64: dd df rcall .-70 ; 0x1f20 + 1f66: 80 32 cpi r24, 0x20 ; 32 + 1f68: 09 f0 breq .+2 ; 0x1f6c + 1f6a: f7 df rcall .-18 ; 0x1f5a + putch(STK_INSYNC); + 1f6c: 84 e1 ldi r24, 0x14 ; 20 +} + 1f6e: c9 cf rjmp .-110 ; 0x1f02 + ::[count] "M" (UART_B_VALUE) + ); +} +#endif + +void getNch(uint8_t count) { + 1f70: 1f 93 push r17 + 1f72: 18 2f mov r17, r24 + +00001f74 : + do getch(); while (--count); + 1f74: d5 df rcall .-86 ; 0x1f20 + 1f76: 11 50 subi r17, 0x01 ; 1 + 1f78: e9 f7 brne .-6 ; 0x1f74 + verifySpace(); + 1f7a: f4 df rcall .-24 ; 0x1f64 +} + 1f7c: 1f 91 pop r17 + 1f7e: 08 95 ret diff --git a/test/ardmake/hardware/bootloaders/optiboot/optiboot_pro_16MHz.hex b/test/ardmake/hardware/bootloaders/optiboot/optiboot_pro_16MHz.hex new file mode 100644 index 0000000..1e93414 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/optiboot/optiboot_pro_16MHz.hex @@ -0,0 +1,33 @@ +:103E000085E08093810082E08093C00088E1809308 +:103E1000C10086E08093C20080E18093C40084B733 +:103E200014BE81FFD0D08DE0C8D0259A86E020E373 +:103E30003CEF91E0309385002093840096BBB09BCB +:103E4000FECF1D9AA8958150A9F7DD24D394A5E053 +:103E5000EA2EF1E1FF2EA4D0813421F481E0BED01E +:103E600083E024C0823411F484E103C0853419F462 +:103E700085E0B4D08AC08535A1F492D0082F10E037 +:103E800010930102009300028BD090E0982F8827B6 +:103E9000802B912B880F991F909301028093000231 +:103EA00073C0863529F484E099D080E071D06DC06C +:103EB000843609F043C07CD0E0910002F091010209 +:103EC00083E080935700E895C0E0D1E069D0899302 +:103ED000809102028150809302028823B9F778D042 +:103EE00007B600FCFDCF4091000250910102A0E016 +:103EF000B1E02C9130E011968C91119790E0982FC1 +:103F00008827822B932B1296FA010C01D09257002E +:103F1000E89511244E5F5F4FF1E0A038BF0749F7E5 +:103F2000E0910002F0910102E0925700E89507B697 +:103F300000FCFDCFF0925700E89527C08437B9F414 +:103F400037D046D0E0910002F09101023196F09313 +:103F50000102E09300023197E4918E2F19D08091F5 +:103F60000202815080930202882361F70EC08537D8 +:103F700039F42ED08EE10CD084E90AD086E096CFB9 +:103F8000813511F488E019D023D080E101D063CFCE +:103F9000982F8091C00085FFFCCF9093C6000895B4 +:103FA000A8958091C00087FFFCCF8091C60008953E +:103FB000F7DFF6DF80930202F3CFE0E6F0E098E16E +:103FC00090838083089580E0F8DFEE27FF2709942F +:103FD000E7DF803209F0F7DF84E1DACF1F93182F93 +:0C3FE000DFDF1150E9F7F4DF1F910895B6 +:0400000300003E00BB +:00000001FF diff --git a/test/ardmake/hardware/bootloaders/optiboot/optiboot_pro_16MHz.lst b/test/ardmake/hardware/bootloaders/optiboot/optiboot_pro_16MHz.lst new file mode 100644 index 0000000..9920a76 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/optiboot/optiboot_pro_16MHz.lst @@ -0,0 +1,520 @@ + +optiboot_pro_16MHz.elf: file format elf32-avr + +Sections: +Idx Name Size VMA LMA File off Algn + 0 .text 000001ec 00003e00 00003e00 00000054 2**1 + CONTENTS, ALLOC, LOAD, READONLY, CODE + 1 .debug_aranges 00000028 00000000 00000000 00000240 2**0 + CONTENTS, READONLY, DEBUGGING + 2 .debug_pubnames 0000006a 00000000 00000000 00000268 2**0 + CONTENTS, READONLY, DEBUGGING + 3 .debug_info 00000269 00000000 00000000 000002d2 2**0 + CONTENTS, READONLY, DEBUGGING + 4 .debug_abbrev 00000196 00000000 00000000 0000053b 2**0 + CONTENTS, READONLY, DEBUGGING + 5 .debug_line 000003d3 00000000 00000000 000006d1 2**0 + CONTENTS, READONLY, DEBUGGING + 6 .debug_frame 00000090 00000000 00000000 00000aa4 2**2 + CONTENTS, READONLY, DEBUGGING + 7 .debug_str 00000135 00000000 00000000 00000b34 2**0 + CONTENTS, READONLY, DEBUGGING + 8 .debug_loc 000001d1 00000000 00000000 00000c69 2**0 + CONTENTS, READONLY, DEBUGGING + 9 .debug_ranges 00000068 00000000 00000000 00000e3a 2**0 + CONTENTS, READONLY, DEBUGGING + +Disassembly of section .text: + +00003e00
: +#ifdef VIRTUAL_BOOT_PARTITION +#define rstVect (*(uint16_t*)(0x204)) +#define wdtVect (*(uint16_t*)(0x206)) +#endif +/* main program starts here */ +int main(void) { + 3e00: 85 e0 ldi r24, 0x05 ; 5 + 3e02: 80 93 81 00 sts 0x0081, r24 +#if LED_START_FLASHES > 0 + // Set up Timer 1 for timeout counter + TCCR1B = _BV(CS12) | _BV(CS10); // div 1024 +#endif +#ifndef SOFT_UART + UCSR0A = _BV(U2X0); //Double speed mode USART0 + 3e06: 82 e0 ldi r24, 0x02 ; 2 + 3e08: 80 93 c0 00 sts 0x00C0, r24 + UCSR0B = _BV(RXEN0) | _BV(TXEN0); + 3e0c: 88 e1 ldi r24, 0x18 ; 24 + 3e0e: 80 93 c1 00 sts 0x00C1, r24 + UCSR0C = _BV(UCSZ00) | _BV(UCSZ01); + 3e12: 86 e0 ldi r24, 0x06 ; 6 + 3e14: 80 93 c2 00 sts 0x00C2, r24 + UBRR0L = (uint8_t)( (F_CPU + BAUD_RATE * 4L) / (BAUD_RATE * 8L) - 1 ); + 3e18: 80 e1 ldi r24, 0x10 ; 16 + 3e1a: 80 93 c4 00 sts 0x00C4, r24 +#endif + + // Adaboot no-wait mod + ch = MCUSR; + 3e1e: 84 b7 in r24, 0x34 ; 52 + MCUSR = 0; + 3e20: 14 be out 0x34, r1 ; 52 + if (!(ch & _BV(EXTRF))) appStart(); + 3e22: 81 ff sbrs r24, 1 + 3e24: d0 d0 rcall .+416 ; 0x3fc6 + + // Set up watchdog to trigger after 500ms + watchdogConfig(WATCHDOG_500MS); + 3e26: 8d e0 ldi r24, 0x0D ; 13 + 3e28: c8 d0 rcall .+400 ; 0x3fba + + /* Set LED pin as output */ + LED_DDR |= _BV(LED); + 3e2a: 25 9a sbi 0x04, 5 ; 4 + 3e2c: 86 e0 ldi r24, 0x06 ; 6 +} + +#if LED_START_FLASHES > 0 +void flash_led(uint8_t count) { + do { + TCNT1 = -(F_CPU/(1024*16)); + 3e2e: 20 e3 ldi r18, 0x30 ; 48 + 3e30: 3c ef ldi r19, 0xFC ; 252 + TIFR1 = _BV(TOV1); + 3e32: 91 e0 ldi r25, 0x01 ; 1 +} + +#if LED_START_FLASHES > 0 +void flash_led(uint8_t count) { + do { + TCNT1 = -(F_CPU/(1024*16)); + 3e34: 30 93 85 00 sts 0x0085, r19 + 3e38: 20 93 84 00 sts 0x0084, r18 + TIFR1 = _BV(TOV1); + 3e3c: 96 bb out 0x16, r25 ; 22 + while(!(TIFR1 & _BV(TOV1))); + 3e3e: b0 9b sbis 0x16, 0 ; 22 + 3e40: fe cf rjmp .-4 ; 0x3e3e + LED_PIN |= _BV(LED); + 3e42: 1d 9a sbi 0x03, 5 ; 3 + return getch(); +} + +// Watchdog functions. These are only safe with interrupts turned off. +void watchdogReset() { + __asm__ __volatile__ ( + 3e44: a8 95 wdr + TCNT1 = -(F_CPU/(1024*16)); + TIFR1 = _BV(TOV1); + while(!(TIFR1 & _BV(TOV1))); + LED_PIN |= _BV(LED); + watchdogReset(); + } while (--count); + 3e46: 81 50 subi r24, 0x01 ; 1 + 3e48: a9 f7 brne .-22 ; 0x3e34 + /* get character from UART */ + ch = getch(); + + if(ch == STK_GET_PARAMETER) { + // GET PARAMETER returns a generic 0x03 reply - enough to keep Avrdude happy + getNch(1); + 3e4a: dd 24 eor r13, r13 + 3e4c: d3 94 inc r13 + boot_page_fill((uint16_t)(void*)addrPtr,a); + addrPtr += 2; + } while (--ch); + + // Write from programming buffer + boot_page_write((uint16_t)(void*)address); + 3e4e: a5 e0 ldi r26, 0x05 ; 5 + 3e50: ea 2e mov r14, r26 + boot_spm_busy_wait(); + +#if defined(RWWSRE) + // Reenable read access to flash + boot_rww_enable(); + 3e52: f1 e1 ldi r31, 0x11 ; 17 + 3e54: ff 2e mov r15, r31 +#endif + + /* Forever loop */ + for (;;) { + /* get character from UART */ + ch = getch(); + 3e56: a4 d0 rcall .+328 ; 0x3fa0 + + if(ch == STK_GET_PARAMETER) { + 3e58: 81 34 cpi r24, 0x41 ; 65 + 3e5a: 21 f4 brne .+8 ; 0x3e64 + // GET PARAMETER returns a generic 0x03 reply - enough to keep Avrdude happy + getNch(1); + 3e5c: 81 e0 ldi r24, 0x01 ; 1 + 3e5e: be d0 rcall .+380 ; 0x3fdc + putch(0x03); + 3e60: 83 e0 ldi r24, 0x03 ; 3 + 3e62: 24 c0 rjmp .+72 ; 0x3eac + } + else if(ch == STK_SET_DEVICE) { + 3e64: 82 34 cpi r24, 0x42 ; 66 + 3e66: 11 f4 brne .+4 ; 0x3e6c + // SET DEVICE is ignored + getNch(20); + 3e68: 84 e1 ldi r24, 0x14 ; 20 + 3e6a: 03 c0 rjmp .+6 ; 0x3e72 + } + else if(ch == STK_SET_DEVICE_EXT) { + 3e6c: 85 34 cpi r24, 0x45 ; 69 + 3e6e: 19 f4 brne .+6 ; 0x3e76 + // SET DEVICE EXT is ignored + getNch(5); + 3e70: 85 e0 ldi r24, 0x05 ; 5 + 3e72: b4 d0 rcall .+360 ; 0x3fdc + 3e74: 8a c0 rjmp .+276 ; 0x3f8a + } + else if(ch == STK_LOAD_ADDRESS) { + 3e76: 85 35 cpi r24, 0x55 ; 85 + 3e78: a1 f4 brne .+40 ; 0x3ea2 + // LOAD ADDRESS + address = getch(); + 3e7a: 92 d0 rcall .+292 ; 0x3fa0 + 3e7c: 08 2f mov r16, r24 + 3e7e: 10 e0 ldi r17, 0x00 ; 0 + 3e80: 10 93 01 02 sts 0x0201, r17 + 3e84: 00 93 00 02 sts 0x0200, r16 + address = (address & 0xff) | (getch() << 8); + 3e88: 8b d0 rcall .+278 ; 0x3fa0 + 3e8a: 90 e0 ldi r25, 0x00 ; 0 + 3e8c: 98 2f mov r25, r24 + 3e8e: 88 27 eor r24, r24 + 3e90: 80 2b or r24, r16 + 3e92: 91 2b or r25, r17 + address += address; // Convert from word address to byte address + 3e94: 88 0f add r24, r24 + 3e96: 99 1f adc r25, r25 + 3e98: 90 93 01 02 sts 0x0201, r25 + 3e9c: 80 93 00 02 sts 0x0200, r24 + 3ea0: 73 c0 rjmp .+230 ; 0x3f88 + verifySpace(); + } + else if(ch == STK_UNIVERSAL) { + 3ea2: 86 35 cpi r24, 0x56 ; 86 + 3ea4: 29 f4 brne .+10 ; 0x3eb0 + // UNIVERSAL command is ignored + getNch(4); + 3ea6: 84 e0 ldi r24, 0x04 ; 4 + 3ea8: 99 d0 rcall .+306 ; 0x3fdc + putch(0x00); + 3eaa: 80 e0 ldi r24, 0x00 ; 0 + 3eac: 71 d0 rcall .+226 ; 0x3f90 + 3eae: 6d c0 rjmp .+218 ; 0x3f8a + } + /* Write memory, length is big endian and is in bytes */ + else if(ch == STK_PROG_PAGE) { + 3eb0: 84 36 cpi r24, 0x64 ; 100 + 3eb2: 09 f0 breq .+2 ; 0x3eb6 + 3eb4: 43 c0 rjmp .+134 ; 0x3f3c + // PROGRAM PAGE - we support flash programming only, not EEPROM + uint8_t *bufPtr; + uint16_t addrPtr; + + getLen(); + 3eb6: 7c d0 rcall .+248 ; 0x3fb0 + + // Immediately start page erase - this will 4.5ms + boot_page_erase((uint16_t)(void*)address); + 3eb8: e0 91 00 02 lds r30, 0x0200 + 3ebc: f0 91 01 02 lds r31, 0x0201 + 3ec0: 83 e0 ldi r24, 0x03 ; 3 + 3ec2: 80 93 57 00 sts 0x0057, r24 + 3ec6: e8 95 spm + 3ec8: c0 e0 ldi r28, 0x00 ; 0 + 3eca: d1 e0 ldi r29, 0x01 ; 1 + + // While that is going on, read in page contents + bufPtr = buff; + do *bufPtr++ = getch(); + 3ecc: 69 d0 rcall .+210 ; 0x3fa0 + 3ece: 89 93 st Y+, r24 + while (--length); + 3ed0: 80 91 02 02 lds r24, 0x0202 + 3ed4: 81 50 subi r24, 0x01 ; 1 + 3ed6: 80 93 02 02 sts 0x0202, r24 + 3eda: 88 23 and r24, r24 + 3edc: b9 f7 brne .-18 ; 0x3ecc + + // Read command terminator, start reply + verifySpace(); + 3ede: 78 d0 rcall .+240 ; 0x3fd0 + + // If only a partial page is to be programmed, the erase might not be complete. + // So check that here + boot_spm_busy_wait(); + 3ee0: 07 b6 in r0, 0x37 ; 55 + 3ee2: 00 fc sbrc r0, 0 + 3ee4: fd cf rjmp .-6 ; 0x3ee0 + } +#endif + + // Copy buffer into programming buffer + bufPtr = buff; + addrPtr = (uint16_t)(void*)address; + 3ee6: 40 91 00 02 lds r20, 0x0200 + 3eea: 50 91 01 02 lds r21, 0x0201 + 3eee: a0 e0 ldi r26, 0x00 ; 0 + 3ef0: b1 e0 ldi r27, 0x01 ; 1 + ch = SPM_PAGESIZE / 2; + do { + uint16_t a; + a = *bufPtr++; + 3ef2: 2c 91 ld r18, X + 3ef4: 30 e0 ldi r19, 0x00 ; 0 + a |= (*bufPtr++) << 8; + 3ef6: 11 96 adiw r26, 0x01 ; 1 + 3ef8: 8c 91 ld r24, X + 3efa: 11 97 sbiw r26, 0x01 ; 1 + 3efc: 90 e0 ldi r25, 0x00 ; 0 + 3efe: 98 2f mov r25, r24 + 3f00: 88 27 eor r24, r24 + 3f02: 82 2b or r24, r18 + 3f04: 93 2b or r25, r19 +#ifdef VIRTUAL_BOOT_PARTITION +#define rstVect (*(uint16_t*)(0x204)) +#define wdtVect (*(uint16_t*)(0x206)) +#endif +/* main program starts here */ +int main(void) { + 3f06: 12 96 adiw r26, 0x02 ; 2 + ch = SPM_PAGESIZE / 2; + do { + uint16_t a; + a = *bufPtr++; + a |= (*bufPtr++) << 8; + boot_page_fill((uint16_t)(void*)addrPtr,a); + 3f08: fa 01 movw r30, r20 + 3f0a: 0c 01 movw r0, r24 + 3f0c: d0 92 57 00 sts 0x0057, r13 + 3f10: e8 95 spm + 3f12: 11 24 eor r1, r1 + addrPtr += 2; + 3f14: 4e 5f subi r20, 0xFE ; 254 + 3f16: 5f 4f sbci r21, 0xFF ; 255 + } while (--ch); + 3f18: f1 e0 ldi r31, 0x01 ; 1 + 3f1a: a0 38 cpi r26, 0x80 ; 128 + 3f1c: bf 07 cpc r27, r31 + 3f1e: 49 f7 brne .-46 ; 0x3ef2 + + // Write from programming buffer + boot_page_write((uint16_t)(void*)address); + 3f20: e0 91 00 02 lds r30, 0x0200 + 3f24: f0 91 01 02 lds r31, 0x0201 + 3f28: e0 92 57 00 sts 0x0057, r14 + 3f2c: e8 95 spm + boot_spm_busy_wait(); + 3f2e: 07 b6 in r0, 0x37 ; 55 + 3f30: 00 fc sbrc r0, 0 + 3f32: fd cf rjmp .-6 ; 0x3f2e + +#if defined(RWWSRE) + // Reenable read access to flash + boot_rww_enable(); + 3f34: f0 92 57 00 sts 0x0057, r15 + 3f38: e8 95 spm + 3f3a: 27 c0 rjmp .+78 ; 0x3f8a +#endif + + } + /* Read memory block mode, length is big endian. */ + else if(ch == STK_READ_PAGE) { + 3f3c: 84 37 cpi r24, 0x74 ; 116 + 3f3e: b9 f4 brne .+46 ; 0x3f6e + // READ PAGE - we only read flash + getLen(); + 3f40: 37 d0 rcall .+110 ; 0x3fb0 + verifySpace(); + 3f42: 46 d0 rcall .+140 ; 0x3fd0 + else ch = pgm_read_byte_near(address); + address++; + putch(ch); + } while (--length); +#else + do putch(pgm_read_byte_near(address++)); + 3f44: e0 91 00 02 lds r30, 0x0200 + 3f48: f0 91 01 02 lds r31, 0x0201 + 3f4c: 31 96 adiw r30, 0x01 ; 1 + 3f4e: f0 93 01 02 sts 0x0201, r31 + 3f52: e0 93 00 02 sts 0x0200, r30 + 3f56: 31 97 sbiw r30, 0x01 ; 1 + 3f58: e4 91 lpm r30, Z+ + 3f5a: 8e 2f mov r24, r30 + 3f5c: 19 d0 rcall .+50 ; 0x3f90 + while (--length); + 3f5e: 80 91 02 02 lds r24, 0x0202 + 3f62: 81 50 subi r24, 0x01 ; 1 + 3f64: 80 93 02 02 sts 0x0202, r24 + 3f68: 88 23 and r24, r24 + 3f6a: 61 f7 brne .-40 ; 0x3f44 + 3f6c: 0e c0 rjmp .+28 ; 0x3f8a +#endif + } + + /* Get device signature bytes */ + else if(ch == STK_READ_SIGN) { + 3f6e: 85 37 cpi r24, 0x75 ; 117 + 3f70: 39 f4 brne .+14 ; 0x3f80 + // READ SIGN - return what Avrdude wants to hear + verifySpace(); + 3f72: 2e d0 rcall .+92 ; 0x3fd0 + putch(SIGNATURE_0); + 3f74: 8e e1 ldi r24, 0x1E ; 30 + 3f76: 0c d0 rcall .+24 ; 0x3f90 + putch(SIGNATURE_1); + 3f78: 84 e9 ldi r24, 0x94 ; 148 + 3f7a: 0a d0 rcall .+20 ; 0x3f90 + putch(SIGNATURE_2); + 3f7c: 86 e0 ldi r24, 0x06 ; 6 + 3f7e: 96 cf rjmp .-212 ; 0x3eac + } + else if (ch == 'Q') { + 3f80: 81 35 cpi r24, 0x51 ; 81 + 3f82: 11 f4 brne .+4 ; 0x3f88 + // Adaboot no-wait mod + watchdogConfig(WATCHDOG_16MS); + 3f84: 88 e0 ldi r24, 0x08 ; 8 + 3f86: 19 d0 rcall .+50 ; 0x3fba + verifySpace(); + } + else { + // This covers the response to commands like STK_ENTER_PROGMODE + verifySpace(); + 3f88: 23 d0 rcall .+70 ; 0x3fd0 + } + putch(STK_OK); + 3f8a: 80 e1 ldi r24, 0x10 ; 16 + 3f8c: 01 d0 rcall .+2 ; 0x3f90 + 3f8e: 63 cf rjmp .-314 ; 0x3e56 + +00003f90 : + } +} + +void putch(char ch) { + 3f90: 98 2f mov r25, r24 +#ifndef SOFT_UART + while (!(UCSR0A & _BV(UDRE0))); + 3f92: 80 91 c0 00 lds r24, 0x00C0 + 3f96: 85 ff sbrs r24, 5 + 3f98: fc cf rjmp .-8 ; 0x3f92 + UDR0 = ch; + 3f9a: 90 93 c6 00 sts 0x00C6, r25 + [uartBit] "I" (UART_TX_BIT) + : + "r25" + ); +#endif +} + 3f9e: 08 95 ret + +00003fa0 : + return getch(); +} + +// Watchdog functions. These are only safe with interrupts turned off. +void watchdogReset() { + __asm__ __volatile__ ( + 3fa0: a8 95 wdr + [uartBit] "I" (UART_RX_BIT) + : + "r25" +); +#else + while(!(UCSR0A & _BV(RXC0))); + 3fa2: 80 91 c0 00 lds r24, 0x00C0 + 3fa6: 87 ff sbrs r24, 7 + 3fa8: fc cf rjmp .-8 ; 0x3fa2 + ch = UDR0; + 3faa: 80 91 c6 00 lds r24, 0x00C6 +#ifdef LED_DATA_FLASH + LED_PIN |= _BV(LED); +#endif + + return ch; +} + 3fae: 08 95 ret + +00003fb0 : + } while (--count); +} +#endif + +uint8_t getLen() { + getch(); + 3fb0: f7 df rcall .-18 ; 0x3fa0 + length = getch(); + 3fb2: f6 df rcall .-20 ; 0x3fa0 + 3fb4: 80 93 02 02 sts 0x0202, r24 + return getch(); +} + 3fb8: f3 cf rjmp .-26 ; 0x3fa0 + +00003fba : + "wdr\n" + ); +} + +void watchdogConfig(uint8_t x) { + WDTCSR = _BV(WDCE) | _BV(WDE); + 3fba: e0 e6 ldi r30, 0x60 ; 96 + 3fbc: f0 e0 ldi r31, 0x00 ; 0 + 3fbe: 98 e1 ldi r25, 0x18 ; 24 + 3fc0: 90 83 st Z, r25 + WDTCSR = x; + 3fc2: 80 83 st Z, r24 +} + 3fc4: 08 95 ret + +00003fc6 : + +void appStart() { + watchdogConfig(WATCHDOG_OFF); + 3fc6: 80 e0 ldi r24, 0x00 ; 0 + 3fc8: f8 df rcall .-16 ; 0x3fba + __asm__ __volatile__ ( + 3fca: ee 27 eor r30, r30 + 3fcc: ff 27 eor r31, r31 + 3fce: 09 94 ijmp + +00003fd0 : + do getch(); while (--count); + verifySpace(); +} + +void verifySpace() { + if (getch() != CRC_EOP) appStart(); + 3fd0: e7 df rcall .-50 ; 0x3fa0 + 3fd2: 80 32 cpi r24, 0x20 ; 32 + 3fd4: 09 f0 breq .+2 ; 0x3fd8 + 3fd6: f7 df rcall .-18 ; 0x3fc6 + putch(STK_INSYNC); + 3fd8: 84 e1 ldi r24, 0x14 ; 20 +} + 3fda: da cf rjmp .-76 ; 0x3f90 + ::[count] "M" (UART_B_VALUE) + ); +} +#endif + +void getNch(uint8_t count) { + 3fdc: 1f 93 push r17 + 3fde: 18 2f mov r17, r24 + +00003fe0 : + do getch(); while (--count); + 3fe0: df df rcall .-66 ; 0x3fa0 + 3fe2: 11 50 subi r17, 0x01 ; 1 + 3fe4: e9 f7 brne .-6 ; 0x3fe0 + verifySpace(); + 3fe6: f4 df rcall .-24 ; 0x3fd0 +} + 3fe8: 1f 91 pop r17 + 3fea: 08 95 ret diff --git a/test/ardmake/hardware/bootloaders/optiboot/optiboot_pro_20mhz.hex b/test/ardmake/hardware/bootloaders/optiboot/optiboot_pro_20mhz.hex new file mode 100644 index 0000000..19c9ae4 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/optiboot/optiboot_pro_20mhz.hex @@ -0,0 +1,33 @@ +:103E000085E08093810082E08093C00088E1809308 +:103E1000C10086E08093C20085E18093C40084B72E +:103E200014BE81FFD0D08DE0C8D0259A86E02CE367 +:103E30003BEF91E0309385002093840096BBB09BCC +:103E4000FECF1D9AA8958150A9F7DD24D394A5E053 +:103E5000EA2EF1E1FF2EA4D0813421F481E0BED01E +:103E600083E024C0823411F484E103C0853419F462 +:103E700085E0B4D08AC08535A1F492D0082F10E037 +:103E800010930102009300028BD090E0982F8827B6 +:103E9000802B912B880F991F909301028093000231 +:103EA00073C0863529F484E099D080E071D06DC06C +:103EB000843609F043C07CD0E0910002F091010209 +:103EC00083E080935700E895C0E0D1E069D0899302 +:103ED000809102028150809302028823B9F778D042 +:103EE00007B600FCFDCF4091000250910102A0E016 +:103EF000B1E02C9130E011968C91119790E0982FC1 +:103F00008827822B932B1296FA010C01D09257002E +:103F1000E89511244E5F5F4FF1E0A038BF0749F7E5 +:103F2000E0910002F0910102E0925700E89507B697 +:103F300000FCFDCFF0925700E89527C08437B9F414 +:103F400037D046D0E0910002F09101023196F09313 +:103F50000102E09300023197E4918E2F19D08091F5 +:103F60000202815080930202882361F70EC08537D8 +:103F700039F42ED08EE10CD084E90AD086E096CFB9 +:103F8000813511F488E019D023D080E101D063CFCE +:103F9000982F8091C00085FFFCCF9093C6000895B4 +:103FA000A8958091C00087FFFCCF8091C60008953E +:103FB000F7DFF6DF80930202F3CFE0E6F0E098E16E +:103FC00090838083089580E0F8DFEE27FF2709942F +:103FD000E7DF803209F0F7DF84E1DACF1F93182F93 +:0C3FE000DFDF1150E9F7F4DF1F910895B6 +:0400000300003E00BB +:00000001FF diff --git a/test/ardmake/hardware/bootloaders/optiboot/optiboot_pro_20mhz.lst b/test/ardmake/hardware/bootloaders/optiboot/optiboot_pro_20mhz.lst new file mode 100644 index 0000000..62178d3 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/optiboot/optiboot_pro_20mhz.lst @@ -0,0 +1,520 @@ + +optiboot_pro_20mhz.elf: file format elf32-avr + +Sections: +Idx Name Size VMA LMA File off Algn + 0 .text 000001ec 00003e00 00003e00 00000054 2**1 + CONTENTS, ALLOC, LOAD, READONLY, CODE + 1 .debug_aranges 00000028 00000000 00000000 00000240 2**0 + CONTENTS, READONLY, DEBUGGING + 2 .debug_pubnames 0000006a 00000000 00000000 00000268 2**0 + CONTENTS, READONLY, DEBUGGING + 3 .debug_info 00000269 00000000 00000000 000002d2 2**0 + CONTENTS, READONLY, DEBUGGING + 4 .debug_abbrev 00000196 00000000 00000000 0000053b 2**0 + CONTENTS, READONLY, DEBUGGING + 5 .debug_line 000003d3 00000000 00000000 000006d1 2**0 + CONTENTS, READONLY, DEBUGGING + 6 .debug_frame 00000090 00000000 00000000 00000aa4 2**2 + CONTENTS, READONLY, DEBUGGING + 7 .debug_str 00000135 00000000 00000000 00000b34 2**0 + CONTENTS, READONLY, DEBUGGING + 8 .debug_loc 000001d1 00000000 00000000 00000c69 2**0 + CONTENTS, READONLY, DEBUGGING + 9 .debug_ranges 00000068 00000000 00000000 00000e3a 2**0 + CONTENTS, READONLY, DEBUGGING + +Disassembly of section .text: + +00003e00
: +#ifdef VIRTUAL_BOOT_PARTITION +#define rstVect (*(uint16_t*)(0x204)) +#define wdtVect (*(uint16_t*)(0x206)) +#endif +/* main program starts here */ +int main(void) { + 3e00: 85 e0 ldi r24, 0x05 ; 5 + 3e02: 80 93 81 00 sts 0x0081, r24 +#if LED_START_FLASHES > 0 + // Set up Timer 1 for timeout counter + TCCR1B = _BV(CS12) | _BV(CS10); // div 1024 +#endif +#ifndef SOFT_UART + UCSR0A = _BV(U2X0); //Double speed mode USART0 + 3e06: 82 e0 ldi r24, 0x02 ; 2 + 3e08: 80 93 c0 00 sts 0x00C0, r24 + UCSR0B = _BV(RXEN0) | _BV(TXEN0); + 3e0c: 88 e1 ldi r24, 0x18 ; 24 + 3e0e: 80 93 c1 00 sts 0x00C1, r24 + UCSR0C = _BV(UCSZ00) | _BV(UCSZ01); + 3e12: 86 e0 ldi r24, 0x06 ; 6 + 3e14: 80 93 c2 00 sts 0x00C2, r24 + UBRR0L = (uint8_t)( (F_CPU + BAUD_RATE * 4L) / (BAUD_RATE * 8L) - 1 ); + 3e18: 85 e1 ldi r24, 0x15 ; 21 + 3e1a: 80 93 c4 00 sts 0x00C4, r24 +#endif + + // Adaboot no-wait mod + ch = MCUSR; + 3e1e: 84 b7 in r24, 0x34 ; 52 + MCUSR = 0; + 3e20: 14 be out 0x34, r1 ; 52 + if (!(ch & _BV(EXTRF))) appStart(); + 3e22: 81 ff sbrs r24, 1 + 3e24: d0 d0 rcall .+416 ; 0x3fc6 + + // Set up watchdog to trigger after 500ms + watchdogConfig(WATCHDOG_500MS); + 3e26: 8d e0 ldi r24, 0x0D ; 13 + 3e28: c8 d0 rcall .+400 ; 0x3fba + + /* Set LED pin as output */ + LED_DDR |= _BV(LED); + 3e2a: 25 9a sbi 0x04, 5 ; 4 + 3e2c: 86 e0 ldi r24, 0x06 ; 6 +} + +#if LED_START_FLASHES > 0 +void flash_led(uint8_t count) { + do { + TCNT1 = -(F_CPU/(1024*16)); + 3e2e: 2c e3 ldi r18, 0x3C ; 60 + 3e30: 3b ef ldi r19, 0xFB ; 251 + TIFR1 = _BV(TOV1); + 3e32: 91 e0 ldi r25, 0x01 ; 1 +} + +#if LED_START_FLASHES > 0 +void flash_led(uint8_t count) { + do { + TCNT1 = -(F_CPU/(1024*16)); + 3e34: 30 93 85 00 sts 0x0085, r19 + 3e38: 20 93 84 00 sts 0x0084, r18 + TIFR1 = _BV(TOV1); + 3e3c: 96 bb out 0x16, r25 ; 22 + while(!(TIFR1 & _BV(TOV1))); + 3e3e: b0 9b sbis 0x16, 0 ; 22 + 3e40: fe cf rjmp .-4 ; 0x3e3e + LED_PIN |= _BV(LED); + 3e42: 1d 9a sbi 0x03, 5 ; 3 + return getch(); +} + +// Watchdog functions. These are only safe with interrupts turned off. +void watchdogReset() { + __asm__ __volatile__ ( + 3e44: a8 95 wdr + TCNT1 = -(F_CPU/(1024*16)); + TIFR1 = _BV(TOV1); + while(!(TIFR1 & _BV(TOV1))); + LED_PIN |= _BV(LED); + watchdogReset(); + } while (--count); + 3e46: 81 50 subi r24, 0x01 ; 1 + 3e48: a9 f7 brne .-22 ; 0x3e34 + /* get character from UART */ + ch = getch(); + + if(ch == STK_GET_PARAMETER) { + // GET PARAMETER returns a generic 0x03 reply - enough to keep Avrdude happy + getNch(1); + 3e4a: dd 24 eor r13, r13 + 3e4c: d3 94 inc r13 + boot_page_fill((uint16_t)(void*)addrPtr,a); + addrPtr += 2; + } while (--ch); + + // Write from programming buffer + boot_page_write((uint16_t)(void*)address); + 3e4e: a5 e0 ldi r26, 0x05 ; 5 + 3e50: ea 2e mov r14, r26 + boot_spm_busy_wait(); + +#if defined(RWWSRE) + // Reenable read access to flash + boot_rww_enable(); + 3e52: f1 e1 ldi r31, 0x11 ; 17 + 3e54: ff 2e mov r15, r31 +#endif + + /* Forever loop */ + for (;;) { + /* get character from UART */ + ch = getch(); + 3e56: a4 d0 rcall .+328 ; 0x3fa0 + + if(ch == STK_GET_PARAMETER) { + 3e58: 81 34 cpi r24, 0x41 ; 65 + 3e5a: 21 f4 brne .+8 ; 0x3e64 + // GET PARAMETER returns a generic 0x03 reply - enough to keep Avrdude happy + getNch(1); + 3e5c: 81 e0 ldi r24, 0x01 ; 1 + 3e5e: be d0 rcall .+380 ; 0x3fdc + putch(0x03); + 3e60: 83 e0 ldi r24, 0x03 ; 3 + 3e62: 24 c0 rjmp .+72 ; 0x3eac + } + else if(ch == STK_SET_DEVICE) { + 3e64: 82 34 cpi r24, 0x42 ; 66 + 3e66: 11 f4 brne .+4 ; 0x3e6c + // SET DEVICE is ignored + getNch(20); + 3e68: 84 e1 ldi r24, 0x14 ; 20 + 3e6a: 03 c0 rjmp .+6 ; 0x3e72 + } + else if(ch == STK_SET_DEVICE_EXT) { + 3e6c: 85 34 cpi r24, 0x45 ; 69 + 3e6e: 19 f4 brne .+6 ; 0x3e76 + // SET DEVICE EXT is ignored + getNch(5); + 3e70: 85 e0 ldi r24, 0x05 ; 5 + 3e72: b4 d0 rcall .+360 ; 0x3fdc + 3e74: 8a c0 rjmp .+276 ; 0x3f8a + } + else if(ch == STK_LOAD_ADDRESS) { + 3e76: 85 35 cpi r24, 0x55 ; 85 + 3e78: a1 f4 brne .+40 ; 0x3ea2 + // LOAD ADDRESS + address = getch(); + 3e7a: 92 d0 rcall .+292 ; 0x3fa0 + 3e7c: 08 2f mov r16, r24 + 3e7e: 10 e0 ldi r17, 0x00 ; 0 + 3e80: 10 93 01 02 sts 0x0201, r17 + 3e84: 00 93 00 02 sts 0x0200, r16 + address = (address & 0xff) | (getch() << 8); + 3e88: 8b d0 rcall .+278 ; 0x3fa0 + 3e8a: 90 e0 ldi r25, 0x00 ; 0 + 3e8c: 98 2f mov r25, r24 + 3e8e: 88 27 eor r24, r24 + 3e90: 80 2b or r24, r16 + 3e92: 91 2b or r25, r17 + address += address; // Convert from word address to byte address + 3e94: 88 0f add r24, r24 + 3e96: 99 1f adc r25, r25 + 3e98: 90 93 01 02 sts 0x0201, r25 + 3e9c: 80 93 00 02 sts 0x0200, r24 + 3ea0: 73 c0 rjmp .+230 ; 0x3f88 + verifySpace(); + } + else if(ch == STK_UNIVERSAL) { + 3ea2: 86 35 cpi r24, 0x56 ; 86 + 3ea4: 29 f4 brne .+10 ; 0x3eb0 + // UNIVERSAL command is ignored + getNch(4); + 3ea6: 84 e0 ldi r24, 0x04 ; 4 + 3ea8: 99 d0 rcall .+306 ; 0x3fdc + putch(0x00); + 3eaa: 80 e0 ldi r24, 0x00 ; 0 + 3eac: 71 d0 rcall .+226 ; 0x3f90 + 3eae: 6d c0 rjmp .+218 ; 0x3f8a + } + /* Write memory, length is big endian and is in bytes */ + else if(ch == STK_PROG_PAGE) { + 3eb0: 84 36 cpi r24, 0x64 ; 100 + 3eb2: 09 f0 breq .+2 ; 0x3eb6 + 3eb4: 43 c0 rjmp .+134 ; 0x3f3c + // PROGRAM PAGE - we support flash programming only, not EEPROM + uint8_t *bufPtr; + uint16_t addrPtr; + + getLen(); + 3eb6: 7c d0 rcall .+248 ; 0x3fb0 + + // Immediately start page erase - this will 4.5ms + boot_page_erase((uint16_t)(void*)address); + 3eb8: e0 91 00 02 lds r30, 0x0200 + 3ebc: f0 91 01 02 lds r31, 0x0201 + 3ec0: 83 e0 ldi r24, 0x03 ; 3 + 3ec2: 80 93 57 00 sts 0x0057, r24 + 3ec6: e8 95 spm + 3ec8: c0 e0 ldi r28, 0x00 ; 0 + 3eca: d1 e0 ldi r29, 0x01 ; 1 + + // While that is going on, read in page contents + bufPtr = buff; + do *bufPtr++ = getch(); + 3ecc: 69 d0 rcall .+210 ; 0x3fa0 + 3ece: 89 93 st Y+, r24 + while (--length); + 3ed0: 80 91 02 02 lds r24, 0x0202 + 3ed4: 81 50 subi r24, 0x01 ; 1 + 3ed6: 80 93 02 02 sts 0x0202, r24 + 3eda: 88 23 and r24, r24 + 3edc: b9 f7 brne .-18 ; 0x3ecc + + // Read command terminator, start reply + verifySpace(); + 3ede: 78 d0 rcall .+240 ; 0x3fd0 + + // If only a partial page is to be programmed, the erase might not be complete. + // So check that here + boot_spm_busy_wait(); + 3ee0: 07 b6 in r0, 0x37 ; 55 + 3ee2: 00 fc sbrc r0, 0 + 3ee4: fd cf rjmp .-6 ; 0x3ee0 + } +#endif + + // Copy buffer into programming buffer + bufPtr = buff; + addrPtr = (uint16_t)(void*)address; + 3ee6: 40 91 00 02 lds r20, 0x0200 + 3eea: 50 91 01 02 lds r21, 0x0201 + 3eee: a0 e0 ldi r26, 0x00 ; 0 + 3ef0: b1 e0 ldi r27, 0x01 ; 1 + ch = SPM_PAGESIZE / 2; + do { + uint16_t a; + a = *bufPtr++; + 3ef2: 2c 91 ld r18, X + 3ef4: 30 e0 ldi r19, 0x00 ; 0 + a |= (*bufPtr++) << 8; + 3ef6: 11 96 adiw r26, 0x01 ; 1 + 3ef8: 8c 91 ld r24, X + 3efa: 11 97 sbiw r26, 0x01 ; 1 + 3efc: 90 e0 ldi r25, 0x00 ; 0 + 3efe: 98 2f mov r25, r24 + 3f00: 88 27 eor r24, r24 + 3f02: 82 2b or r24, r18 + 3f04: 93 2b or r25, r19 +#ifdef VIRTUAL_BOOT_PARTITION +#define rstVect (*(uint16_t*)(0x204)) +#define wdtVect (*(uint16_t*)(0x206)) +#endif +/* main program starts here */ +int main(void) { + 3f06: 12 96 adiw r26, 0x02 ; 2 + ch = SPM_PAGESIZE / 2; + do { + uint16_t a; + a = *bufPtr++; + a |= (*bufPtr++) << 8; + boot_page_fill((uint16_t)(void*)addrPtr,a); + 3f08: fa 01 movw r30, r20 + 3f0a: 0c 01 movw r0, r24 + 3f0c: d0 92 57 00 sts 0x0057, r13 + 3f10: e8 95 spm + 3f12: 11 24 eor r1, r1 + addrPtr += 2; + 3f14: 4e 5f subi r20, 0xFE ; 254 + 3f16: 5f 4f sbci r21, 0xFF ; 255 + } while (--ch); + 3f18: f1 e0 ldi r31, 0x01 ; 1 + 3f1a: a0 38 cpi r26, 0x80 ; 128 + 3f1c: bf 07 cpc r27, r31 + 3f1e: 49 f7 brne .-46 ; 0x3ef2 + + // Write from programming buffer + boot_page_write((uint16_t)(void*)address); + 3f20: e0 91 00 02 lds r30, 0x0200 + 3f24: f0 91 01 02 lds r31, 0x0201 + 3f28: e0 92 57 00 sts 0x0057, r14 + 3f2c: e8 95 spm + boot_spm_busy_wait(); + 3f2e: 07 b6 in r0, 0x37 ; 55 + 3f30: 00 fc sbrc r0, 0 + 3f32: fd cf rjmp .-6 ; 0x3f2e + +#if defined(RWWSRE) + // Reenable read access to flash + boot_rww_enable(); + 3f34: f0 92 57 00 sts 0x0057, r15 + 3f38: e8 95 spm + 3f3a: 27 c0 rjmp .+78 ; 0x3f8a +#endif + + } + /* Read memory block mode, length is big endian. */ + else if(ch == STK_READ_PAGE) { + 3f3c: 84 37 cpi r24, 0x74 ; 116 + 3f3e: b9 f4 brne .+46 ; 0x3f6e + // READ PAGE - we only read flash + getLen(); + 3f40: 37 d0 rcall .+110 ; 0x3fb0 + verifySpace(); + 3f42: 46 d0 rcall .+140 ; 0x3fd0 + else ch = pgm_read_byte_near(address); + address++; + putch(ch); + } while (--length); +#else + do putch(pgm_read_byte_near(address++)); + 3f44: e0 91 00 02 lds r30, 0x0200 + 3f48: f0 91 01 02 lds r31, 0x0201 + 3f4c: 31 96 adiw r30, 0x01 ; 1 + 3f4e: f0 93 01 02 sts 0x0201, r31 + 3f52: e0 93 00 02 sts 0x0200, r30 + 3f56: 31 97 sbiw r30, 0x01 ; 1 + 3f58: e4 91 lpm r30, Z+ + 3f5a: 8e 2f mov r24, r30 + 3f5c: 19 d0 rcall .+50 ; 0x3f90 + while (--length); + 3f5e: 80 91 02 02 lds r24, 0x0202 + 3f62: 81 50 subi r24, 0x01 ; 1 + 3f64: 80 93 02 02 sts 0x0202, r24 + 3f68: 88 23 and r24, r24 + 3f6a: 61 f7 brne .-40 ; 0x3f44 + 3f6c: 0e c0 rjmp .+28 ; 0x3f8a +#endif + } + + /* Get device signature bytes */ + else if(ch == STK_READ_SIGN) { + 3f6e: 85 37 cpi r24, 0x75 ; 117 + 3f70: 39 f4 brne .+14 ; 0x3f80 + // READ SIGN - return what Avrdude wants to hear + verifySpace(); + 3f72: 2e d0 rcall .+92 ; 0x3fd0 + putch(SIGNATURE_0); + 3f74: 8e e1 ldi r24, 0x1E ; 30 + 3f76: 0c d0 rcall .+24 ; 0x3f90 + putch(SIGNATURE_1); + 3f78: 84 e9 ldi r24, 0x94 ; 148 + 3f7a: 0a d0 rcall .+20 ; 0x3f90 + putch(SIGNATURE_2); + 3f7c: 86 e0 ldi r24, 0x06 ; 6 + 3f7e: 96 cf rjmp .-212 ; 0x3eac + } + else if (ch == 'Q') { + 3f80: 81 35 cpi r24, 0x51 ; 81 + 3f82: 11 f4 brne .+4 ; 0x3f88 + // Adaboot no-wait mod + watchdogConfig(WATCHDOG_16MS); + 3f84: 88 e0 ldi r24, 0x08 ; 8 + 3f86: 19 d0 rcall .+50 ; 0x3fba + verifySpace(); + } + else { + // This covers the response to commands like STK_ENTER_PROGMODE + verifySpace(); + 3f88: 23 d0 rcall .+70 ; 0x3fd0 + } + putch(STK_OK); + 3f8a: 80 e1 ldi r24, 0x10 ; 16 + 3f8c: 01 d0 rcall .+2 ; 0x3f90 + 3f8e: 63 cf rjmp .-314 ; 0x3e56 + +00003f90 : + } +} + +void putch(char ch) { + 3f90: 98 2f mov r25, r24 +#ifndef SOFT_UART + while (!(UCSR0A & _BV(UDRE0))); + 3f92: 80 91 c0 00 lds r24, 0x00C0 + 3f96: 85 ff sbrs r24, 5 + 3f98: fc cf rjmp .-8 ; 0x3f92 + UDR0 = ch; + 3f9a: 90 93 c6 00 sts 0x00C6, r25 + [uartBit] "I" (UART_TX_BIT) + : + "r25" + ); +#endif +} + 3f9e: 08 95 ret + +00003fa0 : + return getch(); +} + +// Watchdog functions. These are only safe with interrupts turned off. +void watchdogReset() { + __asm__ __volatile__ ( + 3fa0: a8 95 wdr + [uartBit] "I" (UART_RX_BIT) + : + "r25" +); +#else + while(!(UCSR0A & _BV(RXC0))); + 3fa2: 80 91 c0 00 lds r24, 0x00C0 + 3fa6: 87 ff sbrs r24, 7 + 3fa8: fc cf rjmp .-8 ; 0x3fa2 + ch = UDR0; + 3faa: 80 91 c6 00 lds r24, 0x00C6 +#ifdef LED_DATA_FLASH + LED_PIN |= _BV(LED); +#endif + + return ch; +} + 3fae: 08 95 ret + +00003fb0 : + } while (--count); +} +#endif + +uint8_t getLen() { + getch(); + 3fb0: f7 df rcall .-18 ; 0x3fa0 + length = getch(); + 3fb2: f6 df rcall .-20 ; 0x3fa0 + 3fb4: 80 93 02 02 sts 0x0202, r24 + return getch(); +} + 3fb8: f3 cf rjmp .-26 ; 0x3fa0 + +00003fba : + "wdr\n" + ); +} + +void watchdogConfig(uint8_t x) { + WDTCSR = _BV(WDCE) | _BV(WDE); + 3fba: e0 e6 ldi r30, 0x60 ; 96 + 3fbc: f0 e0 ldi r31, 0x00 ; 0 + 3fbe: 98 e1 ldi r25, 0x18 ; 24 + 3fc0: 90 83 st Z, r25 + WDTCSR = x; + 3fc2: 80 83 st Z, r24 +} + 3fc4: 08 95 ret + +00003fc6 : + +void appStart() { + watchdogConfig(WATCHDOG_OFF); + 3fc6: 80 e0 ldi r24, 0x00 ; 0 + 3fc8: f8 df rcall .-16 ; 0x3fba + __asm__ __volatile__ ( + 3fca: ee 27 eor r30, r30 + 3fcc: ff 27 eor r31, r31 + 3fce: 09 94 ijmp + +00003fd0 : + do getch(); while (--count); + verifySpace(); +} + +void verifySpace() { + if (getch() != CRC_EOP) appStart(); + 3fd0: e7 df rcall .-50 ; 0x3fa0 + 3fd2: 80 32 cpi r24, 0x20 ; 32 + 3fd4: 09 f0 breq .+2 ; 0x3fd8 + 3fd6: f7 df rcall .-18 ; 0x3fc6 + putch(STK_INSYNC); + 3fd8: 84 e1 ldi r24, 0x14 ; 20 +} + 3fda: da cf rjmp .-76 ; 0x3f90 + ::[count] "M" (UART_B_VALUE) + ); +} +#endif + +void getNch(uint8_t count) { + 3fdc: 1f 93 push r17 + 3fde: 18 2f mov r17, r24 + +00003fe0 : + do getch(); while (--count); + 3fe0: df df rcall .-66 ; 0x3fa0 + 3fe2: 11 50 subi r17, 0x01 ; 1 + 3fe4: e9 f7 brne .-6 ; 0x3fe0 + verifySpace(); + 3fe6: f4 df rcall .-24 ; 0x3fd0 +} + 3fe8: 1f 91 pop r17 + 3fea: 08 95 ret diff --git a/test/ardmake/hardware/bootloaders/optiboot/optiboot_pro_8MHz.hex b/test/ardmake/hardware/bootloaders/optiboot/optiboot_pro_8MHz.hex new file mode 100644 index 0000000..9d31a7a --- /dev/null +++ b/test/ardmake/hardware/bootloaders/optiboot/optiboot_pro_8MHz.hex @@ -0,0 +1,34 @@ +:103E000085E08093810084B714BE81FFE4D08DE00B +:103E1000DCD0259A519A86E028E13EEF91E030937C +:103E200085002093840096BBB09BFECF1D9AA89579 +:103E30008150A9F7DD24D394A5E0EA2EF1E1FF2E0D +:103E4000ABD0813421F481E0D1D083E024C082342E +:103E500011F484E103C0853419F485E0C7D08AC029 +:103E60008535A1F499D0082F10E01093010200933A +:103E7000000292D090E0982F8827802B912B880FFA +:103E8000991F909301028093000273C0863529F434 +:103E900084E0ACD080E071D06DC0843609F043C0BE +:103EA0008FD0E0910002F091010283E080935700EF +:103EB000E895C0E0D1E070D08993809102028150F2 +:103EC000809302028823B9F78BD007B600FCFDCFA0 +:103ED0004091000250910102A0E0B1E02C9130E04D +:103EE00011968C91119790E0982F8827822B932B15 +:103EF0001296FA010C01D0925700E89511244E5FFA +:103F00005F4FF1E0A038BF0749F7E0910002F09160 +:103F10000102E0925700E89507B600FCFDCFF09251 +:103F20005700E89527C08437B9F44AD059D0E091BA +:103F30000002F09101023196F0930102E093000239 +:103F40003197E4918E2F19D0809102028150809395 +:103F50000202882361F70EC0853739F441D08EE123 +:103F60000CD084E90AD086E096CF813511F488E040 +:103F70002CD036D080E101D063CF2AE030E08095AC +:103F8000089410F4599802C0599A000015D014D022 +:103F900086952A95B1F70895A89529E030E04899CB +:103FA000FECF0AD009D008D08894489908942A9561 +:103FB00011F08795F7CF089598E09A95F1F7089555 +:103FC000EBDFEADF80930202E7CFE0E6F0E098E182 +:103FD00090838083089580E0F8DFEE27FF2709941F +:103FE000DBDF803209F0F7DF84E1C7CF1F93182FA2 +:0C3FF000D3DF1150E9F7F4DF1F910895B2 +:0400000300003E00BB +:00000001FF diff --git a/test/ardmake/hardware/bootloaders/optiboot/optiboot_pro_8MHz.lst b/test/ardmake/hardware/bootloaders/optiboot/optiboot_pro_8MHz.lst new file mode 100644 index 0000000..94603e2 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/optiboot/optiboot_pro_8MHz.lst @@ -0,0 +1,533 @@ + +optiboot_pro_8MHz.elf: file format elf32-avr + +Sections: +Idx Name Size VMA LMA File off Algn + 0 .text 000001fc 00003e00 00003e00 00000054 2**1 + CONTENTS, ALLOC, LOAD, READONLY, CODE + 1 .debug_aranges 00000028 00000000 00000000 00000250 2**0 + CONTENTS, READONLY, DEBUGGING + 2 .debug_pubnames 00000078 00000000 00000000 00000278 2**0 + CONTENTS, READONLY, DEBUGGING + 3 .debug_info 00000277 00000000 00000000 000002f0 2**0 + CONTENTS, READONLY, DEBUGGING + 4 .debug_abbrev 00000194 00000000 00000000 00000567 2**0 + CONTENTS, READONLY, DEBUGGING + 5 .debug_line 000003bb 00000000 00000000 000006fb 2**0 + CONTENTS, READONLY, DEBUGGING + 6 .debug_frame 000000a0 00000000 00000000 00000ab8 2**2 + CONTENTS, READONLY, DEBUGGING + 7 .debug_str 0000013f 00000000 00000000 00000b58 2**0 + CONTENTS, READONLY, DEBUGGING + 8 .debug_loc 000001a0 00000000 00000000 00000c97 2**0 + CONTENTS, READONLY, DEBUGGING + 9 .debug_ranges 00000070 00000000 00000000 00000e37 2**0 + CONTENTS, READONLY, DEBUGGING + +Disassembly of section .text: + +00003e00
: +#ifdef VIRTUAL_BOOT_PARTITION +#define rstVect (*(uint16_t*)(0x204)) +#define wdtVect (*(uint16_t*)(0x206)) +#endif +/* main program starts here */ +int main(void) { + 3e00: 85 e0 ldi r24, 0x05 ; 5 + 3e02: 80 93 81 00 sts 0x0081, r24 + UCSR0C = _BV(UCSZ00) | _BV(UCSZ01); + UBRR0L = (uint8_t)( (F_CPU + BAUD_RATE * 4L) / (BAUD_RATE * 8L) - 1 ); +#endif + + // Adaboot no-wait mod + ch = MCUSR; + 3e06: 84 b7 in r24, 0x34 ; 52 + MCUSR = 0; + 3e08: 14 be out 0x34, r1 ; 52 + if (!(ch & _BV(EXTRF))) appStart(); + 3e0a: 81 ff sbrs r24, 1 + 3e0c: e4 d0 rcall .+456 ; 0x3fd6 + + // Set up watchdog to trigger after 500ms + watchdogConfig(WATCHDOG_500MS); + 3e0e: 8d e0 ldi r24, 0x0D ; 13 + 3e10: dc d0 rcall .+440 ; 0x3fca + + /* Set LED pin as output */ + LED_DDR |= _BV(LED); + 3e12: 25 9a sbi 0x04, 5 ; 4 + +#ifdef SOFT_UART + /* Set TX pin as output */ + UART_DDR |= _BV(UART_TX_BIT); + 3e14: 51 9a sbi 0x0a, 1 ; 10 + 3e16: 86 e0 ldi r24, 0x06 ; 6 +} + +#if LED_START_FLASHES > 0 +void flash_led(uint8_t count) { + do { + TCNT1 = -(F_CPU/(1024*16)); + 3e18: 28 e1 ldi r18, 0x18 ; 24 + 3e1a: 3e ef ldi r19, 0xFE ; 254 + TIFR1 = _BV(TOV1); + 3e1c: 91 e0 ldi r25, 0x01 ; 1 +} + +#if LED_START_FLASHES > 0 +void flash_led(uint8_t count) { + do { + TCNT1 = -(F_CPU/(1024*16)); + 3e1e: 30 93 85 00 sts 0x0085, r19 + 3e22: 20 93 84 00 sts 0x0084, r18 + TIFR1 = _BV(TOV1); + 3e26: 96 bb out 0x16, r25 ; 22 + while(!(TIFR1 & _BV(TOV1))); + 3e28: b0 9b sbis 0x16, 0 ; 22 + 3e2a: fe cf rjmp .-4 ; 0x3e28 + LED_PIN |= _BV(LED); + 3e2c: 1d 9a sbi 0x03, 5 ; 3 + return getch(); +} + +// Watchdog functions. These are only safe with interrupts turned off. +void watchdogReset() { + __asm__ __volatile__ ( + 3e2e: a8 95 wdr + TCNT1 = -(F_CPU/(1024*16)); + TIFR1 = _BV(TOV1); + while(!(TIFR1 & _BV(TOV1))); + LED_PIN |= _BV(LED); + watchdogReset(); + } while (--count); + 3e30: 81 50 subi r24, 0x01 ; 1 + 3e32: a9 f7 brne .-22 ; 0x3e1e + /* get character from UART */ + ch = getch(); + + if(ch == STK_GET_PARAMETER) { + // GET PARAMETER returns a generic 0x03 reply - enough to keep Avrdude happy + getNch(1); + 3e34: dd 24 eor r13, r13 + 3e36: d3 94 inc r13 + boot_page_fill((uint16_t)(void*)addrPtr,a); + addrPtr += 2; + } while (--ch); + + // Write from programming buffer + boot_page_write((uint16_t)(void*)address); + 3e38: a5 e0 ldi r26, 0x05 ; 5 + 3e3a: ea 2e mov r14, r26 + boot_spm_busy_wait(); + +#if defined(RWWSRE) + // Reenable read access to flash + boot_rww_enable(); + 3e3c: f1 e1 ldi r31, 0x11 ; 17 + 3e3e: ff 2e mov r15, r31 +#endif + + /* Forever loop */ + for (;;) { + /* get character from UART */ + ch = getch(); + 3e40: ab d0 rcall .+342 ; 0x3f98 + + if(ch == STK_GET_PARAMETER) { + 3e42: 81 34 cpi r24, 0x41 ; 65 + 3e44: 21 f4 brne .+8 ; 0x3e4e + // GET PARAMETER returns a generic 0x03 reply - enough to keep Avrdude happy + getNch(1); + 3e46: 81 e0 ldi r24, 0x01 ; 1 + 3e48: d1 d0 rcall .+418 ; 0x3fec + putch(0x03); + 3e4a: 83 e0 ldi r24, 0x03 ; 3 + 3e4c: 24 c0 rjmp .+72 ; 0x3e96 + } + else if(ch == STK_SET_DEVICE) { + 3e4e: 82 34 cpi r24, 0x42 ; 66 + 3e50: 11 f4 brne .+4 ; 0x3e56 + // SET DEVICE is ignored + getNch(20); + 3e52: 84 e1 ldi r24, 0x14 ; 20 + 3e54: 03 c0 rjmp .+6 ; 0x3e5c + } + else if(ch == STK_SET_DEVICE_EXT) { + 3e56: 85 34 cpi r24, 0x45 ; 69 + 3e58: 19 f4 brne .+6 ; 0x3e60 + // SET DEVICE EXT is ignored + getNch(5); + 3e5a: 85 e0 ldi r24, 0x05 ; 5 + 3e5c: c7 d0 rcall .+398 ; 0x3fec + 3e5e: 8a c0 rjmp .+276 ; 0x3f74 + } + else if(ch == STK_LOAD_ADDRESS) { + 3e60: 85 35 cpi r24, 0x55 ; 85 + 3e62: a1 f4 brne .+40 ; 0x3e8c + // LOAD ADDRESS + address = getch(); + 3e64: 99 d0 rcall .+306 ; 0x3f98 + 3e66: 08 2f mov r16, r24 + 3e68: 10 e0 ldi r17, 0x00 ; 0 + 3e6a: 10 93 01 02 sts 0x0201, r17 + 3e6e: 00 93 00 02 sts 0x0200, r16 + address = (address & 0xff) | (getch() << 8); + 3e72: 92 d0 rcall .+292 ; 0x3f98 + 3e74: 90 e0 ldi r25, 0x00 ; 0 + 3e76: 98 2f mov r25, r24 + 3e78: 88 27 eor r24, r24 + 3e7a: 80 2b or r24, r16 + 3e7c: 91 2b or r25, r17 + address += address; // Convert from word address to byte address + 3e7e: 88 0f add r24, r24 + 3e80: 99 1f adc r25, r25 + 3e82: 90 93 01 02 sts 0x0201, r25 + 3e86: 80 93 00 02 sts 0x0200, r24 + 3e8a: 73 c0 rjmp .+230 ; 0x3f72 + verifySpace(); + } + else if(ch == STK_UNIVERSAL) { + 3e8c: 86 35 cpi r24, 0x56 ; 86 + 3e8e: 29 f4 brne .+10 ; 0x3e9a + // UNIVERSAL command is ignored + getNch(4); + 3e90: 84 e0 ldi r24, 0x04 ; 4 + 3e92: ac d0 rcall .+344 ; 0x3fec + putch(0x00); + 3e94: 80 e0 ldi r24, 0x00 ; 0 + 3e96: 71 d0 rcall .+226 ; 0x3f7a + 3e98: 6d c0 rjmp .+218 ; 0x3f74 + } + /* Write memory, length is big endian and is in bytes */ + else if(ch == STK_PROG_PAGE) { + 3e9a: 84 36 cpi r24, 0x64 ; 100 + 3e9c: 09 f0 breq .+2 ; 0x3ea0 + 3e9e: 43 c0 rjmp .+134 ; 0x3f26 + // PROGRAM PAGE - we support flash programming only, not EEPROM + uint8_t *bufPtr; + uint16_t addrPtr; + + getLen(); + 3ea0: 8f d0 rcall .+286 ; 0x3fc0 + + // Immediately start page erase - this will 4.5ms + boot_page_erase((uint16_t)(void*)address); + 3ea2: e0 91 00 02 lds r30, 0x0200 + 3ea6: f0 91 01 02 lds r31, 0x0201 + 3eaa: 83 e0 ldi r24, 0x03 ; 3 + 3eac: 80 93 57 00 sts 0x0057, r24 + 3eb0: e8 95 spm + 3eb2: c0 e0 ldi r28, 0x00 ; 0 + 3eb4: d1 e0 ldi r29, 0x01 ; 1 + + // While that is going on, read in page contents + bufPtr = buff; + do *bufPtr++ = getch(); + 3eb6: 70 d0 rcall .+224 ; 0x3f98 + 3eb8: 89 93 st Y+, r24 + while (--length); + 3eba: 80 91 02 02 lds r24, 0x0202 + 3ebe: 81 50 subi r24, 0x01 ; 1 + 3ec0: 80 93 02 02 sts 0x0202, r24 + 3ec4: 88 23 and r24, r24 + 3ec6: b9 f7 brne .-18 ; 0x3eb6 + + // Read command terminator, start reply + verifySpace(); + 3ec8: 8b d0 rcall .+278 ; 0x3fe0 + + // If only a partial page is to be programmed, the erase might not be complete. + // So check that here + boot_spm_busy_wait(); + 3eca: 07 b6 in r0, 0x37 ; 55 + 3ecc: 00 fc sbrc r0, 0 + 3ece: fd cf rjmp .-6 ; 0x3eca + } +#endif + + // Copy buffer into programming buffer + bufPtr = buff; + addrPtr = (uint16_t)(void*)address; + 3ed0: 40 91 00 02 lds r20, 0x0200 + 3ed4: 50 91 01 02 lds r21, 0x0201 + 3ed8: a0 e0 ldi r26, 0x00 ; 0 + 3eda: b1 e0 ldi r27, 0x01 ; 1 + ch = SPM_PAGESIZE / 2; + do { + uint16_t a; + a = *bufPtr++; + 3edc: 2c 91 ld r18, X + 3ede: 30 e0 ldi r19, 0x00 ; 0 + a |= (*bufPtr++) << 8; + 3ee0: 11 96 adiw r26, 0x01 ; 1 + 3ee2: 8c 91 ld r24, X + 3ee4: 11 97 sbiw r26, 0x01 ; 1 + 3ee6: 90 e0 ldi r25, 0x00 ; 0 + 3ee8: 98 2f mov r25, r24 + 3eea: 88 27 eor r24, r24 + 3eec: 82 2b or r24, r18 + 3eee: 93 2b or r25, r19 +#ifdef VIRTUAL_BOOT_PARTITION +#define rstVect (*(uint16_t*)(0x204)) +#define wdtVect (*(uint16_t*)(0x206)) +#endif +/* main program starts here */ +int main(void) { + 3ef0: 12 96 adiw r26, 0x02 ; 2 + ch = SPM_PAGESIZE / 2; + do { + uint16_t a; + a = *bufPtr++; + a |= (*bufPtr++) << 8; + boot_page_fill((uint16_t)(void*)addrPtr,a); + 3ef2: fa 01 movw r30, r20 + 3ef4: 0c 01 movw r0, r24 + 3ef6: d0 92 57 00 sts 0x0057, r13 + 3efa: e8 95 spm + 3efc: 11 24 eor r1, r1 + addrPtr += 2; + 3efe: 4e 5f subi r20, 0xFE ; 254 + 3f00: 5f 4f sbci r21, 0xFF ; 255 + } while (--ch); + 3f02: f1 e0 ldi r31, 0x01 ; 1 + 3f04: a0 38 cpi r26, 0x80 ; 128 + 3f06: bf 07 cpc r27, r31 + 3f08: 49 f7 brne .-46 ; 0x3edc + + // Write from programming buffer + boot_page_write((uint16_t)(void*)address); + 3f0a: e0 91 00 02 lds r30, 0x0200 + 3f0e: f0 91 01 02 lds r31, 0x0201 + 3f12: e0 92 57 00 sts 0x0057, r14 + 3f16: e8 95 spm + boot_spm_busy_wait(); + 3f18: 07 b6 in r0, 0x37 ; 55 + 3f1a: 00 fc sbrc r0, 0 + 3f1c: fd cf rjmp .-6 ; 0x3f18 + +#if defined(RWWSRE) + // Reenable read access to flash + boot_rww_enable(); + 3f1e: f0 92 57 00 sts 0x0057, r15 + 3f22: e8 95 spm + 3f24: 27 c0 rjmp .+78 ; 0x3f74 +#endif + + } + /* Read memory block mode, length is big endian. */ + else if(ch == STK_READ_PAGE) { + 3f26: 84 37 cpi r24, 0x74 ; 116 + 3f28: b9 f4 brne .+46 ; 0x3f58 + // READ PAGE - we only read flash + getLen(); + 3f2a: 4a d0 rcall .+148 ; 0x3fc0 + verifySpace(); + 3f2c: 59 d0 rcall .+178 ; 0x3fe0 + else ch = pgm_read_byte_near(address); + address++; + putch(ch); + } while (--length); +#else + do putch(pgm_read_byte_near(address++)); + 3f2e: e0 91 00 02 lds r30, 0x0200 + 3f32: f0 91 01 02 lds r31, 0x0201 + 3f36: 31 96 adiw r30, 0x01 ; 1 + 3f38: f0 93 01 02 sts 0x0201, r31 + 3f3c: e0 93 00 02 sts 0x0200, r30 + 3f40: 31 97 sbiw r30, 0x01 ; 1 + 3f42: e4 91 lpm r30, Z+ + 3f44: 8e 2f mov r24, r30 + 3f46: 19 d0 rcall .+50 ; 0x3f7a + while (--length); + 3f48: 80 91 02 02 lds r24, 0x0202 + 3f4c: 81 50 subi r24, 0x01 ; 1 + 3f4e: 80 93 02 02 sts 0x0202, r24 + 3f52: 88 23 and r24, r24 + 3f54: 61 f7 brne .-40 ; 0x3f2e + 3f56: 0e c0 rjmp .+28 ; 0x3f74 +#endif + } + + /* Get device signature bytes */ + else if(ch == STK_READ_SIGN) { + 3f58: 85 37 cpi r24, 0x75 ; 117 + 3f5a: 39 f4 brne .+14 ; 0x3f6a + // READ SIGN - return what Avrdude wants to hear + verifySpace(); + 3f5c: 41 d0 rcall .+130 ; 0x3fe0 + putch(SIGNATURE_0); + 3f5e: 8e e1 ldi r24, 0x1E ; 30 + 3f60: 0c d0 rcall .+24 ; 0x3f7a + putch(SIGNATURE_1); + 3f62: 84 e9 ldi r24, 0x94 ; 148 + 3f64: 0a d0 rcall .+20 ; 0x3f7a + putch(SIGNATURE_2); + 3f66: 86 e0 ldi r24, 0x06 ; 6 + 3f68: 96 cf rjmp .-212 ; 0x3e96 + } + else if (ch == 'Q') { + 3f6a: 81 35 cpi r24, 0x51 ; 81 + 3f6c: 11 f4 brne .+4 ; 0x3f72 + // Adaboot no-wait mod + watchdogConfig(WATCHDOG_16MS); + 3f6e: 88 e0 ldi r24, 0x08 ; 8 + 3f70: 2c d0 rcall .+88 ; 0x3fca + verifySpace(); + } + else { + // This covers the response to commands like STK_ENTER_PROGMODE + verifySpace(); + 3f72: 36 d0 rcall .+108 ; 0x3fe0 + } + putch(STK_OK); + 3f74: 80 e1 ldi r24, 0x10 ; 16 + 3f76: 01 d0 rcall .+2 ; 0x3f7a + 3f78: 63 cf rjmp .-314 ; 0x3e40 + +00003f7a : +void putch(char ch) { +#ifndef SOFT_UART + while (!(UCSR0A & _BV(UDRE0))); + UDR0 = ch; +#else + __asm__ __volatile__ ( + 3f7a: 2a e0 ldi r18, 0x0A ; 10 + 3f7c: 30 e0 ldi r19, 0x00 ; 0 + 3f7e: 80 95 com r24 + 3f80: 08 94 sec + 3f82: 10 f4 brcc .+4 ; 0x3f88 + 3f84: 59 98 cbi 0x0b, 1 ; 11 + 3f86: 02 c0 rjmp .+4 ; 0x3f8c + 3f88: 59 9a sbi 0x0b, 1 ; 11 + 3f8a: 00 00 nop + 3f8c: 15 d0 rcall .+42 ; 0x3fb8 + 3f8e: 14 d0 rcall .+40 ; 0x3fb8 + 3f90: 86 95 lsr r24 + 3f92: 2a 95 dec r18 + 3f94: b1 f7 brne .-20 ; 0x3f82 + [uartBit] "I" (UART_TX_BIT) + : + "r25" + ); +#endif +} + 3f96: 08 95 ret + +00003f98 : + return getch(); +} + +// Watchdog functions. These are only safe with interrupts turned off. +void watchdogReset() { + __asm__ __volatile__ ( + 3f98: a8 95 wdr +#ifdef LED_DATA_FLASH + LED_PIN |= _BV(LED); +#endif + + return ch; +} + 3f9a: 29 e0 ldi r18, 0x09 ; 9 + 3f9c: 30 e0 ldi r19, 0x00 ; 0 + 3f9e: 48 99 sbic 0x09, 0 ; 9 + 3fa0: fe cf rjmp .-4 ; 0x3f9e + 3fa2: 0a d0 rcall .+20 ; 0x3fb8 + 3fa4: 09 d0 rcall .+18 ; 0x3fb8 + 3fa6: 08 d0 rcall .+16 ; 0x3fb8 + 3fa8: 88 94 clc + 3faa: 48 99 sbic 0x09, 0 ; 9 + 3fac: 08 94 sec + 3fae: 2a 95 dec r18 + 3fb0: 11 f0 breq .+4 ; 0x3fb6 + 3fb2: 87 95 ror r24 + 3fb4: f7 cf rjmp .-18 ; 0x3fa4 + 3fb6: 08 95 ret + +00003fb8 : +#if UART_B_VALUE > 255 +#error Baud rate too slow for soft UART +#endif + +void uartDelay() { + __asm__ __volatile__ ( + 3fb8: 98 e0 ldi r25, 0x08 ; 8 + 3fba: 9a 95 dec r25 + 3fbc: f1 f7 brne .-4 ; 0x3fba + 3fbe: 08 95 ret + +00003fc0 : + } while (--count); +} +#endif + +uint8_t getLen() { + getch(); + 3fc0: eb df rcall .-42 ; 0x3f98 + length = getch(); + 3fc2: ea df rcall .-44 ; 0x3f98 + 3fc4: 80 93 02 02 sts 0x0202, r24 + return getch(); +} + 3fc8: e7 cf rjmp .-50 ; 0x3f98 + +00003fca : + "wdr\n" + ); +} + +void watchdogConfig(uint8_t x) { + WDTCSR = _BV(WDCE) | _BV(WDE); + 3fca: e0 e6 ldi r30, 0x60 ; 96 + 3fcc: f0 e0 ldi r31, 0x00 ; 0 + 3fce: 98 e1 ldi r25, 0x18 ; 24 + 3fd0: 90 83 st Z, r25 + WDTCSR = x; + 3fd2: 80 83 st Z, r24 +} + 3fd4: 08 95 ret + +00003fd6 : + +void appStart() { + watchdogConfig(WATCHDOG_OFF); + 3fd6: 80 e0 ldi r24, 0x00 ; 0 + 3fd8: f8 df rcall .-16 ; 0x3fca + __asm__ __volatile__ ( + 3fda: ee 27 eor r30, r30 + 3fdc: ff 27 eor r31, r31 + 3fde: 09 94 ijmp + +00003fe0 : + do getch(); while (--count); + verifySpace(); +} + +void verifySpace() { + if (getch() != CRC_EOP) appStart(); + 3fe0: db df rcall .-74 ; 0x3f98 + 3fe2: 80 32 cpi r24, 0x20 ; 32 + 3fe4: 09 f0 breq .+2 ; 0x3fe8 + 3fe6: f7 df rcall .-18 ; 0x3fd6 + putch(STK_INSYNC); + 3fe8: 84 e1 ldi r24, 0x14 ; 20 +} + 3fea: c7 cf rjmp .-114 ; 0x3f7a + ::[count] "M" (UART_B_VALUE) + ); +} +#endif + +void getNch(uint8_t count) { + 3fec: 1f 93 push r17 + 3fee: 18 2f mov r17, r24 + +00003ff0 : + do getch(); while (--count); + 3ff0: d3 df rcall .-90 ; 0x3f98 + 3ff2: 11 50 subi r17, 0x01 ; 1 + 3ff4: e9 f7 brne .-6 ; 0x3ff0 + verifySpace(); + 3ff6: f4 df rcall .-24 ; 0x3fe0 +} + 3ff8: 1f 91 pop r17 + 3ffa: 08 95 ret diff --git a/test/ardmake/hardware/bootloaders/stk500v2/Makefile b/test/ardmake/hardware/bootloaders/stk500v2/Makefile new file mode 100644 index 0000000..54c5f85 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/stk500v2/Makefile @@ -0,0 +1,588 @@ +# ---------------------------------------------------------------------------- +# Makefile to compile and link stk500boot bootloader +# Author: Peter Fleury +# File: $Id: Makefile,v 1.3 2006/03/04 19:26:17 peter Exp $ +# based on WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al. +# +# Adjust F_CPU below to the clock frequency in Mhz of your AVR target +# Adjust BOOTLOADER_ADDRESS to your AVR target +# +#---------------------------------------------------------------------------- +# On command line: +# +# make all = Make software. +# +# make clean = Clean out built project files. +# +# make coff = Convert ELF to AVR COFF. +# +# make extcoff = Convert ELF to AVR Extended COFF. +# +# make program = Download the hex file to the device, using avrdude. +# Please customize the avrdude settings below first! +# +# make debug = Start either simulavr or avarice as specified for debugging, +# with avr-gdb or avr-insight as the front end for debugging. +# +# make filename.s = Just compile filename.c into the assembler code only. +# +# make filename.i = Create a preprocessed source file for use in submitting +# bug reports to the GCC project. +# +# To rebuild project do "make clean" then "make all". +#---------------------------------------------------------------------------- +# = Mark Sproul msproul-at-skychariot.com + + +# MCU name +#MCU = atmega128 + + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +#F_CPU = 16000000 + + +# Bootloader +# Please adjust if using a different AVR +# 0x0e00*2=0x1C00 for ATmega8 512 words Boot Size +# 0xFC00*2=0x1F800 for ATmega128 1024 words Boot Size +# 0xF800*2=0x1F000 for ATmega1280 +# 0xF000*2=0x1E000 for ATmega1280 +#BOOTLOADER_ADDRESS = 1E000 + + +# Output format. (can be srec, ihex, binary) +FORMAT = ihex + + +# Target file name (without extension). +TARGET = stk500boot + + +# List C source files here. (C dependencies are automatically generated.) +SRC = stk500boot.c + + +# List Assembler source files here. +# Make them always end in a capital .S. Files ending in a lowercase .s +# will not be considered source files but generated files (assembler +# output from the compiler), and will be deleted upon "make clean"! +# Even though the DOS/Win* filesystem matches both .s and .S the same, +# it will preserve the spelling of the filenames, and gcc itself does +# care about how the name is spelled on its command-line. +ASRC = + + +# Optimization level, can be [0, 1, 2, 3, s]. +# 0 = turn off optimization. s = optimize for size. +# (Note: 3 is not always the best optimization level. See avr-libc FAQ.) +OPT = s + + +# Debugging format. +# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs. +# AVR Studio 4.10 requires dwarf-2. +# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run. +DEBUG = dwarf-2 + + +# List any extra directories to look for include files here. +# Each directory must be seperated by a space. +# Use forward slashes for directory separators. +# For a directory that has spaces, enclose it in quotes. +EXTRAINCDIRS = + + +# Compiler flag to set the C Standard level. +# c89 = "ANSI" C +# gnu89 = c89 plus GCC extensions +# c99 = ISO C99 standard (not yet fully implemented) +# gnu99 = c99 plus GCC extensions +CSTANDARD = -std=gnu99 + + +# Place -D or -U options here +CDEFS = -DF_CPU=$(F_CPU)UL + + +# Place -I options here +CINCS = + + + +#---------------- Compiler Options ---------------- +# -g*: generate debugging information +# -O*: optimization level +# -f...: tuning, see GCC manual and avr-libc documentation +# -Wall...: warning level +# -Wa,...: tell GCC to pass this to the assembler. +# -adhlns...: create assembler listing +CFLAGS = -g$(DEBUG) +CFLAGS += $(CDEFS) $(CINCS) +CFLAGS += -O$(OPT) +CFLAGS += -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums -mno-tablejump +CFLAGS += -Wall -Wstrict-prototypes +CFLAGS += -Wa,-adhlns=$(<:.c=.lst) +CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) +CFLAGS += $(CSTANDARD) + + +#---------------- Assembler Options ---------------- +# -Wa,...: tell GCC to pass this to the assembler. +# -ahlms: create listing +# -gstabs: have the assembler create line number information; note that +# for use in COFF files, additional information about filenames +# and function names needs to be present in the assembler source +# files -- see avr-libc docs [FIXME: not yet described there] +ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs + + +#---------------- Library Options ---------------- +# Minimalistic printf version +PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min + +# Floating point printf version (requires MATH_LIB = -lm below) +PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt + +# If this is left blank, then it will use the Standard printf version. +PRINTF_LIB = +#PRINTF_LIB = $(PRINTF_LIB_MIN) +#PRINTF_LIB = $(PRINTF_LIB_FLOAT) + + +# Minimalistic scanf version +SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min + +# Floating point + %[ scanf version (requires MATH_LIB = -lm below) +SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt + +# If this is left blank, then it will use the Standard scanf version. +SCANF_LIB = +#SCANF_LIB = $(SCANF_LIB_MIN) +#SCANF_LIB = $(SCANF_LIB_FLOAT) + + +MATH_LIB = -lm + + + +#---------------- External Memory Options ---------------- + +# 64 KB of external RAM, starting after internal RAM (ATmega128!), +# used for variables (.data/.bss) and heap (malloc()). +#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff + +# 64 KB of external RAM, starting after internal RAM (ATmega128!), +# only used for heap (malloc()). +#EXTMEMOPTS = -Wl,--defsym=__heap_start=0x801100,--defsym=__heap_end=0x80ffff + +EXTMEMOPTS = + + + + +#---------------- Linker Options ---------------- +# -Wl,...: tell GCC to pass this to linker. +# -Map: create map file +# --cref: add cross reference to map file +LDFLAGS = -Wl,-Map=$(TARGET).map,--cref +LDFLAGS += $(EXTMEMOPTS) +LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB) + + +#--------------- bootloader linker Options ------- +# BOOTLOADER_ADDRESS (=Start of Boot Loader section +# in bytes - not words) is defined above. +#LDFLAGS += -Wl,--section-start=.text=$(BOOTLOADER_ADDRESS) -nostartfiles -nodefaultlibs +#LDFLAGS += -Wl,--section-start=.text=$(BOOTLOADER_ADDRESS) -nostartfiles +LDFLAGS += -Wl,--section-start=.text=$(BOOTLOADER_ADDRESS) + +#---------------- Programming Options (avrdude) ---------------- + +# Programming hardware: alf avr910 avrisp bascom bsd +# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500 +# +# Type: avrdude -c ? +# to get a full listing. +# +AVRDUDE_PROGRAMMER = stk500v2 + +# com1 = serial port. Use lpt1 to connect to parallel port. +AVRDUDE_PORT = com1 # programmer connected to serial device + +AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex +#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep + + +# Uncomment the following if you want avrdude's erase cycle counter. +# Note that this counter needs to be initialized first using -Yn, +# see avrdude manual. +#AVRDUDE_ERASE_COUNTER = -y + +# Uncomment the following if you do /not/ wish a verification to be +# performed after programming the device. +#AVRDUDE_NO_VERIFY = -V + +# Increase verbosity level. Please use this when submitting bug +# reports about avrdude. See +# to submit bug reports. +#AVRDUDE_VERBOSE = -v -v + +AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) +AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY) +AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE) +AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER) + + + +#---------------- Debugging Options ---------------- + +# For simulavr only - target MCU frequency. +DEBUG_MFREQ = $(F_CPU) + +# Set the DEBUG_UI to either gdb or insight. +# DEBUG_UI = gdb +DEBUG_UI = insight + +# Set the debugging back-end to either avarice, simulavr. +DEBUG_BACKEND = avarice +#DEBUG_BACKEND = simulavr + +# GDB Init Filename. +GDBINIT_FILE = __avr_gdbinit + +# When using avarice settings for the JTAG +JTAG_DEV = /dev/com1 + +# Debugging port used to communicate between GDB / avarice / simulavr. +DEBUG_PORT = 4242 + +# Debugging host used to communicate between GDB / avarice / simulavr, normally +# just set to localhost unless doing some sort of crazy debugging when +# avarice is running on a different computer. +DEBUG_HOST = localhost + + + +#============================================================================ + + +# Define programs and commands. +SHELL = sh +CC = avr-gcc +OBJCOPY = avr-objcopy +OBJDUMP = avr-objdump +SIZE = avr-size +NM = avr-nm +AVRDUDE = avrdude +REMOVE = rm -f +COPY = cp +WINSHELL = cmd + + +# Define Messages +# English +MSG_ERRORS_NONE = Errors: none +MSG_BEGIN = -------- begin -------- +MSG_END = -------- end -------- +MSG_SIZE_BEFORE = Size before: +MSG_SIZE_AFTER = Size after: +MSG_COFF = Converting to AVR COFF: +MSG_EXTENDED_COFF = Converting to AVR Extended COFF: +MSG_FLASH = Creating load file for Flash: +MSG_EEPROM = Creating load file for EEPROM: +MSG_EXTENDED_LISTING = Creating Extended Listing: +MSG_SYMBOL_TABLE = Creating Symbol Table: +MSG_LINKING = Linking: +MSG_COMPILING = Compiling: +MSG_ASSEMBLING = Assembling: +MSG_CLEANING = Cleaning project: + + + + +# Define all object files. +OBJ = $(SRC:.c=.o) $(ASRC:.S=.o) + +# Define all listing files. +LST = $(SRC:.c=.lst) $(ASRC:.S=.lst) + + +# Compiler flags to generate dependency files. +GENDEPFLAGS = -MD -MP -MF .dep/$(@F).d + + +# Combine all necessary flags and optional flags. +# Add target processor to flags. +ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS) +ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) + + + +############################################################ +# May 25, 2010 Adding 1280 support +mega1280: MCU = atmega1280 +mega1280: F_CPU = 16000000 +mega1280: BOOTLOADER_ADDRESS = 1E000 +mega1280: CFLAGS += -D_MEGA_BOARD_ +mega1280: begin gccversion sizebefore build sizeafter end + mv $(TARGET).hex stk500boot_v2_mega1280.hex + + +############################################################ +# Jul 6, 2010 Adding 2560 support +mega2560: MCU = atmega2560 +mega2560: F_CPU = 16000000 +mega2560: BOOTLOADER_ADDRESS = 3E000 +mega2560: CFLAGS += -D_MEGA_BOARD_ +mega2560: begin gccversion sizebefore build sizeafter end + mv $(TARGET).hex stk500boot_v2_mega2560.hex + + +############################################################ +#Initial config on Amber128 board +# avrdude: Device signature = 0x1e9702 +# avrdude: safemode: lfuse reads as 8F +# avrdude: safemode: hfuse reads as CB +# avrdude: safemode: efuse reads as FF +# Jul 17, 2010 Adding 128 support +############################################################ +amber128: MCU = atmega128 +#amber128: F_CPU = 16000000 +amber128: F_CPU = 14745600 +amber128: BOOTLOADER_ADDRESS = 1E000 +amber128: CFLAGS += -D_BOARD_AMBER128_ +amber128: begin gccversion sizebefore build sizeafter end + mv $(TARGET).hex stk500boot_v2_amber128.hex + +############################################################ +# Aug 23, 2010 Adding atmega2561 support +m2561: MCU = atmega2561 +m2561: F_CPU = 8000000 +m2561: BOOTLOADER_ADDRESS = 3E000 +m2561: CFLAGS += -D_ANDROID_2561_ -DBAUDRATE=57600 +m2561: begin gccversion sizebefore build sizeafter end + mv $(TARGET).hex stk500boot_v2_android2561.hex + + +############################################################ +# avrdude: Device signature = 0x1e9801 +# avrdude: safemode: lfuse reads as EC +# avrdude: safemode: hfuse reads as 18 +# avrdude: safemode: efuse reads as FD +# Aug 23, 2010 Adding cerebot 2560 @ 8mhz +#avrdude -P usb -c usbtiny -p m2560 -v -U flash:w:/Arduino/WiringBootV2_upd1/stk500boot_v2_cerebotplus.hex +############################################################ +cerebot: MCU = atmega2560 +cerebot: F_CPU = 8000000 +cerebot: BOOTLOADER_ADDRESS = 3E000 +cerebot: CFLAGS += -D_CEREBOTPLUS_BOARD_ -DBAUDRATE=38400 -DUART_BAUDRATE_DOUBLE_SPEED=1 +cerebot: begin gccversion sizebefore build sizeafter end + mv $(TARGET).hex stk500boot_v2_cerebotplus.hex + + +############################################################ +# Aug 23, 2010 Adding atmega2561 support +penguino: MCU = atmega32 +penguino: F_CPU = 16000000 +penguino: BOOTLOADER_ADDRESS = 7800 +penguino: CFLAGS += -D_PENGUINO_ -DBAUDRATE=57600 +penguino: begin gccversion sizebefore build sizeafter end + mv $(TARGET).hex stk500boot_v2_penguino.hex + + +# Default target. +all: begin gccversion sizebefore build sizeafter end + +build: elf hex eep lss sym +#build: hex eep lss sym + +elf: $(TARGET).elf +hex: $(TARGET).hex +eep: $(TARGET).eep +lss: $(TARGET).lss +sym: $(TARGET).sym + + + +# Eye candy. +# AVR Studio 3.x does not check make's exit code but relies on +# the following magic strings to be generated by the compile job. +begin: + @echo + @echo $(MSG_BEGIN) + +end: + @echo $(MSG_END) + @echo + + +# Display size of file. +HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex +ELFSIZE = $(SIZE) --format=avr --mcu=$(MCU) $(TARGET).elf + +sizebefore: + @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \ + 2>/dev/null; echo; fi + +sizeafter: + @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ + 2>/dev/null; echo; fi + + + +# Display compiler version information. +gccversion : + @$(CC) --version + + + +# Program the device. +program: $(TARGET).hex $(TARGET).eep + $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) + + +# Generate avr-gdb config/init file which does the following: +# define the reset signal, load the target file, connect to target, and set +# a breakpoint at main(). +gdb-config: + @$(REMOVE) $(GDBINIT_FILE) + @echo define reset >> $(GDBINIT_FILE) + @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) + @echo end >> $(GDBINIT_FILE) + @echo file $(TARGET).elf >> $(GDBINIT_FILE) + @echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE) +ifeq ($(DEBUG_BACKEND),simulavr) + @echo load >> $(GDBINIT_FILE) +endif + @echo break main >> $(GDBINIT_FILE) + +debug: gdb-config $(TARGET).elf +ifeq ($(DEBUG_BACKEND), avarice) + @echo Starting AVaRICE - Press enter when "waiting to connect" message displays. + @$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \ + $(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT) + @$(WINSHELL) /c pause + +else + @$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \ + $(DEBUG_MFREQ) --port $(DEBUG_PORT) +endif + @$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE) + + + + +# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB. +COFFCONVERT=$(OBJCOPY) --debugging \ +--change-section-address .data-0x800000 \ +--change-section-address .bss-0x800000 \ +--change-section-address .noinit-0x800000 \ +--change-section-address .eeprom-0x810000 + + + +coff: $(TARGET).elf + @echo + @echo $(MSG_COFF) $(TARGET).cof + $(COFFCONVERT) -O coff-avr $< $(TARGET).cof + + +extcoff: $(TARGET).elf + @echo + @echo $(MSG_EXTENDED_COFF) $(TARGET).cof + $(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof + + +# Create final output files (.hex, .eep) from ELF output file. +%.hex: %.elf + @echo + @echo $(MSG_FLASH) $@ + $(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@ + +%.eep: %.elf + @echo + @echo $(MSG_EEPROM) $@ + -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \ + --change-section-lma .eeprom=0 -O $(FORMAT) $< $@ + +# Create extended listing file from ELF output file. +%.lss: %.elf + @echo + @echo $(MSG_EXTENDED_LISTING) $@ + $(OBJDUMP) -h -S $< > $@ + +# Create a symbol table from ELF output file. +%.sym: %.elf + @echo + @echo $(MSG_SYMBOL_TABLE) $@ + $(NM) -n $< > $@ + + + +# Link: create ELF output file from object files. +.SECONDARY : $(TARGET).elf +.PRECIOUS : $(OBJ) +%.elf: $(OBJ) + @echo + @echo $(MSG_LINKING) $@ + $(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS) + + +# Compile: create object files from C source files. +%.o : %.c + @echo + @echo $(MSG_COMPILING) $< + $(CC) -c $(ALL_CFLAGS) $< -o $@ + + +# Compile: create assembler files from C source files. +%.s : %.c + $(CC) -S $(ALL_CFLAGS) $< -o $@ + + +# Assemble: create object files from assembler source files. +%.o : %.S + @echo + @echo $(MSG_ASSEMBLING) $< + $(CC) -c $(ALL_ASFLAGS) $< -o $@ + +# Create preprocessed source for use in sending a bug report. +%.i : %.c + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + + +# Target: clean project. +clean: begin clean_list end + +clean_list : + @echo + @echo $(MSG_CLEANING) + $(REMOVE) *.hex + $(REMOVE) *.eep + $(REMOVE) *.cof + $(REMOVE) *.elf + $(REMOVE) *.map + $(REMOVE) *.sym + $(REMOVE) *.lss + $(REMOVE) $(OBJ) + $(REMOVE) $(LST) + $(REMOVE) $(SRC:.c=.s) + $(REMOVE) $(SRC:.c=.d) + $(REMOVE) .dep/* + + + +# Include the dependency files. +-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*) + + +# Listing of phony targets. +.PHONY : all begin finish end sizebefore sizeafter gccversion \ +build elf hex eep lss sym coff extcoff \ +clean clean_list program debug gdb-config + diff --git a/test/ardmake/hardware/bootloaders/stk500v2/STK500V2.pnproj b/test/ardmake/hardware/bootloaders/stk500v2/STK500V2.pnproj new file mode 100644 index 0000000..d935019 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/stk500v2/STK500V2.pnproj @@ -0,0 +1 @@ + \ No newline at end of file diff --git a/test/ardmake/hardware/bootloaders/stk500v2/STK500V2.pnps b/test/ardmake/hardware/bootloaders/stk500v2/STK500V2.pnps new file mode 100644 index 0000000..f85cde5 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/stk500v2/STK500V2.pnps @@ -0,0 +1 @@ + \ No newline at end of file diff --git a/test/ardmake/hardware/bootloaders/stk500v2/avrinterruptnames.h b/test/ardmake/hardware/bootloaders/stk500v2/avrinterruptnames.h new file mode 100644 index 0000000..0ae80f9 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/stk500v2/avrinterruptnames.h @@ -0,0 +1,742 @@ +//************************************************************************************************** +//* +//* interrupt vector names +//* +//* It is important to note that the vector numbers listed here +//* are the ATMEL documentation numbers. The Arduino numbers are 1 less +//* This is because the Atmel docs start numbering the interrupts at 1 +//* when it is actually vector #0 in the table. +//************************************************************************************************** +//* Jun 1, 2010 Added support for ATmega1281 +//* Jun 30, 2010 Putting in more ifdefs to conserve space +//* Jul 3, 2010 More #ifdefs to conserve space and testing on most of my boards +//* Jul 4, 2010 Started using vector defs for #ifdefs as defined in +//* Jul 13, 2010 Added support for __AVR_ATmega128__ +//* Aug 26, 2010 Added support for __AVR_ATmega2561__ +//************************************************************************************************** + +//#include "avrinterruptnames.h" + +//************************************************************************************************** +//* this defines the interrupt vectors and allows us to compile ONLY those strings that are actually +//* in the target CPU. This way we do not have to keep making changes based on cpu, it will be +//* automatic even if we add a new CPU +#ifndef _AVR_IO_H_ + #include +#endif +//************************************************************************************************** + +#ifdef __MWERKS__ + #define prog_char char + #define PGM_P char * +#endif + + prog_char gAvrInt_RESET[] PROGMEM = "RESET"; +#ifdef INT0_vect + prog_char gAvrInt_INT0[] PROGMEM = "INT0"; +#endif +#ifdef INT1_vect + prog_char gAvrInt_INT1[] PROGMEM = "INT1"; +#endif +#ifdef INT2_vect + prog_char gAvrInt_INT2[] PROGMEM = "INT2"; +#endif +#ifdef INT3_vect + prog_char gAvrInt_INT3[] PROGMEM = "INT3"; +#endif +#ifdef INT4_vect + prog_char gAvrInt_INT4[] PROGMEM = "INT4"; +#endif +#ifdef INT5_vect + prog_char gAvrInt_INT5[] PROGMEM = "INT5"; +#endif +#ifdef INT6_vect + prog_char gAvrInt_INT6[] PROGMEM = "INT6"; +#endif +#ifdef INT7_vect + prog_char gAvrInt_INT7[] PROGMEM = "INT7"; +#endif +#ifdef PCINT0_vect + prog_char gAvrInt_PCINT0[] PROGMEM = "PCINT0"; +#endif +#ifdef PCINT1_vect + prog_char gAvrInt_PCINT1[] PROGMEM = "PCINT1"; +#endif +#ifdef PCINT2_vect + prog_char gAvrInt_PCINT2[] PROGMEM = "PCINT2"; +#endif +#ifdef PCINT3_vect + prog_char gAvrInt_PCINT3[] PROGMEM = "PCINT3"; +#endif +#ifdef WDT_vect + prog_char gAvrInt_WDT[] PROGMEM = "WDT"; +#endif +#ifdef TIMER0_COMP_vect + prog_char gAvrInt_TIMER0_COMP[] PROGMEM = "TIMER0 COMP"; +#endif +#ifdef TIMER0_COMPA_vect + prog_char gAvrInt_TIMER0_COMPA[] PROGMEM = "TIMER0 COMPA"; +#endif +#ifdef TIMER0_COMPB_vect + prog_char gAvrInt_TIMER0_COMPB[] PROGMEM = "TIMER0 COMPB"; +#endif +#ifdef TIMER0_OVF_vect + prog_char gAvrInt_TIMER0_OVF[] PROGMEM = "TIMER0 OVF"; +#endif +#ifdef TIMER1_CAPT_vect + prog_char gAvrInt_TIMER1_CAPT[] PROGMEM = "TIMER1 CAPT"; +#endif +#ifdef TIMER1_COMPA_vect + prog_char gAvrInt_TIMER1_COMPA[] PROGMEM = "TIMER1 COMPA"; +#endif +#ifdef TIMER1_COMPB_vect + prog_char gAvrInt_TIMER1_COMPB[] PROGMEM = "TIMER1 COMPB"; +#endif +#ifdef TIMER1_COMPC_vect + prog_char gAvrInt_TIMER1_COMPC[] PROGMEM = "TIMER1 COMPC"; +#endif +#ifdef TIMER1_OVF_vect + prog_char gAvrInt_TIMER1_OVF[] PROGMEM = "TIMER1 OVF"; +#endif +#ifdef TIMER2_COMP_vect + prog_char gAvrInt_TIMER2_COMP[] PROGMEM = "TIMER2 COMP"; +#endif +#ifdef TIMER2_COMPA_vect + prog_char gAvrInt_TIMER2_COMPA[] PROGMEM = "TIMER2 COMPA"; +#endif +#ifdef TIMER2_COMPB_vect + prog_char gAvrInt_TIMER2_COMPB[] PROGMEM = "TIMER2 COMPB"; +#endif +#ifdef TIMER2_OVF_vect + prog_char gAvrInt_TIMER2_OVF[] PROGMEM = "TIMER2 OVF"; +#endif +#ifdef TIMER3_CAPT_vect + prog_char gAvrInt_TIMER3_CAPT[] PROGMEM = "TIMER3 CAPT"; +#endif +#ifdef TIMER3_COMPA_vect + prog_char gAvrInt_TIMER3_COMPA[] PROGMEM = "TIMER3 COMPA"; +#endif +#ifdef TIMER3_COMPB_vect + prog_char gAvrInt_TIMER3_COMPB[] PROGMEM = "TIMER3 COMPB"; +#endif +#ifdef TIMER3_COMPC_vect + prog_char gAvrInt_TIMER3_COMPC[] PROGMEM = "TIMER3 COMPC"; +#endif +#ifdef TIMER3_OVF_vect + prog_char gAvrInt_TIMER3_OVF[] PROGMEM = "TIMER3 OVF"; +#endif +#ifdef TIMER4_CAPT_vect + prog_char gAvrInt_TIMER4_CAPT[] PROGMEM = "TIMER4 CAPT"; +#endif +#ifdef TIMER4_COMPA_vect + prog_char gAvrInt_TIMER4_COMPA[] PROGMEM = "TIMER4 COMPA"; +#endif +#ifdef TIMER4_COMPB_vect + prog_char gAvrInt_TIMER4_COMPB[] PROGMEM = "TIMER4 COMPB"; +#endif +#ifdef TIMER4_COMPC_vect + prog_char gAvrInt_TIMER4_COMPC[] PROGMEM = "TIMER4 COMPC"; +#endif +#ifdef TIMER4_COMPD_vect + prog_char gAvrInt_TIMER4_COMPD[] PROGMEM = "TIMER4 COMPD"; +#endif +#ifdef TIMER4_OVF_vect + prog_char gAvrInt_TIMER4_OVF[] PROGMEM = "TIMER4 OVF"; +#endif +#ifdef TIMER4_FPF_vect + prog_char gAvrInt_TIMER4_FPF[] PROGMEM = "TIMER4 Fault Protection"; +#endif +#ifdef TIMER5_CAPT_vect + prog_char gAvrInt_TIMER5_CAPT[] PROGMEM = "TIMER5 CAPT"; +#endif +#ifdef TIMER5_COMPA_vect + prog_char gAvrInt_TIMER5_COMPA[] PROGMEM = "TIMER5 COMPA"; +#endif +#ifdef TIMER5_COMPB_vect + prog_char gAvrInt_TIMER5_COMPB[] PROGMEM = "TIMER5 COMPB"; +#endif +#ifdef TIMER5_COMPC_vect + prog_char gAvrInt_TIMER5_COMPC[] PROGMEM = "TIMER5 COMPC"; +#endif +#ifdef TIMER5_OVF_vect + prog_char gAvrInt_TIMER5_OVF[] PROGMEM = "TIMER5 OVF"; +#endif + +//* when there is only 1 usart +#if defined(USART_RX_vect) || defined(USART_RXC_vect) + prog_char gAvrInt_USART_RX[] PROGMEM = "USART RX"; +#endif +#if defined(USART_UDRE_vect) + prog_char gAvrInt_USART_UDRE[] PROGMEM = "USART UDRE"; +#endif +#if defined(USART_TX_vect) || defined(USART_TXC_vect) + prog_char gAvrInt_USART_TX[] PROGMEM = "USART TX"; +#endif + + +//* usart 0 +#if defined(USART0_RX_vect) + prog_char gAvrInt_USART0_RX[] PROGMEM = "USART0 RX"; +#endif +#if defined(USART0_UDRE_vect) + prog_char gAvrInt_USART0_UDRE[] PROGMEM = "USART0 UDRE"; +#endif +#if defined(USART0_TX_vect) + prog_char gAvrInt_USART0_TX[] PROGMEM = "USART0 TX"; +#endif + + +//* usart 1 +#ifdef USART1_RX_vect + prog_char gAvrInt_USART1_RX[] PROGMEM = "USART1 RX"; +#endif +#ifdef USART1_UDRE_vect + prog_char gAvrInt_USART1_UDRE[] PROGMEM = "USART1 UDRE"; +#endif +#ifdef USART1_TX_vect + prog_char gAvrInt_USART1_TX[] PROGMEM = "USART1 TX"; +#endif + +//* usart 2 +#ifdef USART2_RX_vect + prog_char gAvrInt_USART2_RX[] PROGMEM = "USART2 RX"; +#endif +#ifdef USART2_UDRE_vect + prog_char gAvrInt_USART2_UDRE[] PROGMEM = "USART2 UDRE"; +#endif +#ifdef USART2_TX_vect + prog_char gAvrInt_USART2_TX[] PROGMEM = "USART2 TX"; +#endif + +//* usart 3 +#ifdef USART3_RX_vect + prog_char gAvrInt_USART3_RX[] PROGMEM = "USART3 RX"; +#endif +#ifdef USART3_UDRE_vect + prog_char gAvrInt_USART3_UDRE[] PROGMEM = "USART3 UDRE"; +#endif +#ifdef USART3_TX_vect + prog_char gAvrInt_USART3_TX[] PROGMEM = "USART3 TX"; +#endif +#ifdef SPI_STC_vect + prog_char gAvrInt_SPI_STC[] PROGMEM = "SPI STC"; +#endif +#ifdef ADC_vect + prog_char gAvrInt_ADC[] PROGMEM = "ADC"; +#endif +#if defined(ANALOG_COMP_vect) || defined(ANA_COMP_vect) + prog_char gAvrInt_ANALOG_COMP[] PROGMEM = "ANALOG COMP"; +#endif +#if defined(EE_READY_vect) || defined(EE_RDY_vect) + prog_char gAvrInt_EE_READY[] PROGMEM = "EE READY"; +#endif +#ifdef TWI_vect + prog_char gAvrInt_TWI[] PROGMEM = "TWI"; +#endif +#if defined(SPM_READY_vect) || defined(SPM_RDY_vect) + prog_char gAvrInt_SPM_READY[] PROGMEM = "SPM READY"; +#endif +#ifdef USI_START_vect + prog_char gAvrInt_USI_START[] PROGMEM = "USI START"; +#endif +#ifdef USI_OVERFLOW_vect + prog_char gAvrInt_USI_OVERFLOW[] PROGMEM = "USI OVERFLOW"; +#endif +#ifdef USB_GEN_vect + prog_char gAvrInt_USB_General[] PROGMEM = "USB General"; +#endif +#ifdef USB_COM_vect + prog_char gAvrInt_USB_Endpoint[] PROGMEM = "USB Endpoint"; +#endif + +#ifdef LCD_vect + prog_char gAvrInt_LCD_StartFrame[] PROGMEM = "LCD Start of Frame"; +#endif + + +//************************************************************************************************** +//* these do not have vector defs and have to be done by CPU type +#if defined(__AVR_ATmega645__ ) || defined(__AVR_ATmega1281__) || defined(__AVR_ATmega2561__) + prog_char gAvrInt_NOT_USED[] PROGMEM = "NOT_USED"; +#endif +#if defined(__AVR_ATmega32U4__) + prog_char gAvrInt_RESERVED[] PROGMEM = "Reserved"; +#endif + + prog_char gAvrInt_END[] PROGMEM = "*"; + + + + + +//************************************************************************************************** +#if defined(__AVR_ATmega168__) || defined(__AVR_ATmega328P__) +#pragma mark __AVR_ATmega168__ / __AVR_ATmega328P__ + +#define _INTERRUPT_NAMES_DEFINED_ + +PGM_P gInterruptNameTable[] PROGMEM = +{ + + gAvrInt_RESET, // 1 + gAvrInt_INT0, // 2 + gAvrInt_INT1, // 3 + gAvrInt_PCINT0, // 4 + gAvrInt_PCINT1, // 5 + gAvrInt_PCINT2, // 6 + gAvrInt_WDT, // 7 + gAvrInt_TIMER2_COMPA, // 8 + gAvrInt_TIMER2_COMPB, // 9 + gAvrInt_TIMER2_OVF, // 10 + gAvrInt_TIMER1_CAPT, // 11 + gAvrInt_TIMER1_COMPA, // 12 + gAvrInt_TIMER1_COMPB, // 13 + gAvrInt_TIMER1_OVF, // 14 + gAvrInt_TIMER0_COMPA, // 15 + gAvrInt_TIMER0_COMPB, // 16 + gAvrInt_TIMER0_OVF, // 17 + gAvrInt_SPI_STC, // 18 + gAvrInt_USART_RX, // 19 + gAvrInt_USART_UDRE, // 20 + gAvrInt_USART_TX, // 21 + gAvrInt_ADC, // 22 + gAvrInt_EE_READY, // 23 + gAvrInt_ANALOG_COMP, // 24 + gAvrInt_TWI, // 25 + gAvrInt_SPM_READY, // 26 +}; + +#endif + +//************************************************************************************************** +#pragma mark __AVR_ATmega169__ +#if defined(__AVR_ATmega169__) + +#define _INTERRUPT_NAMES_DEFINED_ + +PGM_P gInterruptNameTable[] PROGMEM = +{ + + gAvrInt_RESET, // 1 + gAvrInt_INT0, // 2 + gAvrInt_PCINT0, // 3 + gAvrInt_PCINT1, // 4 + gAvrInt_TIMER2_COMP, // 5 + gAvrInt_TIMER2_OVF, // 6 + gAvrInt_TIMER1_CAPT, // 7 + gAvrInt_TIMER1_COMPA, // 8 + gAvrInt_TIMER1_COMPB, // 9 + gAvrInt_TIMER1_OVF, // 10 + gAvrInt_TIMER0_COMP, // 11 + gAvrInt_TIMER0_OVF, // 12 + gAvrInt_SPI_STC, // 13 + gAvrInt_USART0_RX, // 14 + gAvrInt_USART0_UDRE, // 15 + gAvrInt_USART0_TX, // 16 + gAvrInt_USI_START, // 17 + gAvrInt_USI_OVERFLOW, // 18 + gAvrInt_ANALOG_COMP, // 19 + gAvrInt_ADC, // 20 + gAvrInt_EE_READY, // 21 + gAvrInt_SPM_READY, // 22 + gAvrInt_LCD_StartFrame, // 23 + +}; + +#endif + + +//************************************************************************************************** +#if defined(__AVR_ATmega640__) || defined(__AVR_ATmega1280__) || defined(__AVR_ATmega1281__) || defined(__AVR_ATmega2560__) || defined(__AVR_ATmega2561__) +#pragma mark __AVR_ATmega640__ __AVR_ATmega1280__ __AVR_ATmega1281__ __AVR_ATmega2560__ __AVR_ATmega2561__ + +#define _INTERRUPT_NAMES_DEFINED_ + +PGM_P gInterruptNameTable[] PROGMEM = +{ + + gAvrInt_RESET, // 1 + gAvrInt_INT0, // 2 + gAvrInt_INT1, // 3 + gAvrInt_INT2, // 4 + gAvrInt_INT3, // 5 + gAvrInt_INT4, // 6 + gAvrInt_INT5, // 7 + gAvrInt_INT6, // 8 + gAvrInt_INT7, // 9 + gAvrInt_PCINT0, // 10 + gAvrInt_PCINT1, // 11 +#if defined(__AVR_ATmega640__) || defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) + gAvrInt_PCINT2, // 12 +#else + gAvrInt_NOT_USED, // 12 +#endif + gAvrInt_WDT, // 13 + gAvrInt_TIMER2_COMPA, // 14 + gAvrInt_TIMER2_COMPB, // 15 + gAvrInt_TIMER2_OVF, // 16 + gAvrInt_TIMER1_CAPT, // 17 + gAvrInt_TIMER1_COMPA, // 18 + gAvrInt_TIMER1_COMPB, // 19 + gAvrInt_TIMER1_COMPC, // 20 + gAvrInt_TIMER1_OVF, // 21 + gAvrInt_TIMER0_COMPA, // 22 + gAvrInt_TIMER0_COMPB, // 23 + gAvrInt_TIMER0_OVF, // 24 + gAvrInt_SPI_STC, // 25 + + gAvrInt_USART0_RX, // 26 + gAvrInt_USART0_UDRE, // 27 + gAvrInt_USART0_TX, // 28 + gAvrInt_ANALOG_COMP, // 29 + gAvrInt_ADC, // 30 + gAvrInt_EE_READY, // 31 + + gAvrInt_TIMER3_CAPT, // 32 + gAvrInt_TIMER3_COMPA, // 33 + gAvrInt_TIMER3_COMPB, // 34 + gAvrInt_TIMER3_COMPC, // 35 + gAvrInt_TIMER3_OVF, // 36 + + gAvrInt_USART1_RX, // 37 + gAvrInt_USART1_UDRE, // 38 + gAvrInt_USART1_TX, // 39 + gAvrInt_TWI, // 40 + gAvrInt_SPM_READY, // 41 +#if defined(__AVR_ATmega640__) || defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) + gAvrInt_TIMER4_CAPT, // 42 +#else + gAvrInt_NOT_USED, // 42 +#endif + gAvrInt_TIMER4_COMPA, // 43 + gAvrInt_TIMER4_COMPB, // 44 + gAvrInt_TIMER4_COMPC, // 45 + gAvrInt_TIMER4_OVF, // 46 +#if defined(__AVR_ATmega640__) || defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) + gAvrInt_TIMER5_CAPT, // 47 +#else + gAvrInt_NOT_USED, // 47 +#endif + gAvrInt_TIMER5_COMPA, // 48 + gAvrInt_TIMER5_COMPB, // 49 + gAvrInt_TIMER5_COMPC, // 50 + gAvrInt_TIMER5_OVF, // 51 + +#if defined(__AVR_ATmega640__) || defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) + gAvrInt_USART2_RX, // 52 + gAvrInt_USART2_UDRE, // 53 + gAvrInt_USART2_TX, // 54 + + gAvrInt_USART3_RX, // 55 + gAvrInt_USART3_UDRE, // 56 + gAvrInt_USART3_TX, // 57 +#endif + +}; + +#endif + + + +//************************************************************************************************** +#if defined(__AVR_ATmega324P__ ) || defined(__AVR_ATmega644__ ) || defined(__AVR_ATmega644P__) || defined(__AVR_ATmega1284P__) +#pragma mark __AVR_ATmega324P__ __AVR_ATmega644__ __AVR_ATmega644P__ __AVR_ATmega1284P__ + +#define _INTERRUPT_NAMES_DEFINED_ + +PGM_P gInterruptNameTable[] PROGMEM = +{ + + gAvrInt_RESET, // 1 + gAvrInt_INT0, // 2 + gAvrInt_INT1, // 3 + gAvrInt_INT2, // 4 + gAvrInt_PCINT0, // 5 + gAvrInt_PCINT1, // 6 + gAvrInt_PCINT2, // 7 + gAvrInt_PCINT3, // 8 + gAvrInt_WDT, // 9 + gAvrInt_TIMER2_COMPA, // 10 + gAvrInt_TIMER2_COMPB, // 11 + gAvrInt_TIMER2_OVF, // 12 + gAvrInt_TIMER1_CAPT, // 13 + gAvrInt_TIMER1_COMPA, // 14 + gAvrInt_TIMER1_COMPB, // 15 + gAvrInt_TIMER1_OVF, // 16 + gAvrInt_TIMER0_COMPA, // 17 + gAvrInt_TIMER0_COMPB, // 18 + gAvrInt_TIMER0_OVF, // 19 + gAvrInt_SPI_STC, // 20 + gAvrInt_USART0_RX, // 21 + gAvrInt_USART0_UDRE, // 22 + gAvrInt_USART0_TX, // 23 + gAvrInt_ANALOG_COMP, // 24 + gAvrInt_ADC, // 25 + gAvrInt_EE_READY, // 26 + gAvrInt_TWI, // 27 + gAvrInt_SPM_READY, // 28 + +#if defined(__AVR_ATmega324P__ ) || defined(__AVR_ATmega644P__) + gAvrInt_USART1_RX, // 29 + gAvrInt_USART1_UDRE, // 30 + gAvrInt_USART1_TX, // 31 +#endif + +}; + + +#endif + +//************************************************************************************************** +#if defined(__AVR_ATmega645__ ) +#pragma mark __AVR_ATmega645__ + +#define _INTERRUPT_NAMES_DEFINED_ + +PGM_P gInterruptNameTable[] PROGMEM = +{ + + gAvrInt_RESET, // 1 + gAvrInt_INT0, // 2 + gAvrInt_PCINT0, // 3 + gAvrInt_PCINT1, // 4 + gAvrInt_TIMER2_COMP, // 5 + gAvrInt_TIMER2_OVF, // 6 + gAvrInt_TIMER1_CAPT, // 7 + gAvrInt_TIMER1_COMPA, // 8 + gAvrInt_TIMER1_COMPB, // 9 + gAvrInt_TIMER1_OVF, // 10 + gAvrInt_TIMER0_COMP, // 11 + gAvrInt_TIMER0_OVF, // 12 + gAvrInt_SPI_STC, // 13 + gAvrInt_USART0_RX, // 14 + gAvrInt_USART0_UDRE, // 15 + gAvrInt_USART0_TX, // 16 + gAvrInt_USI_START, // 17 + gAvrInt_USI_OVERFLOW, // 18 + gAvrInt_ANALOG_COMP, // 19 + gAvrInt_ADC, // 20 + gAvrInt_EE_READY, // 21 + gAvrInt_SPM_READY, // 22 + gAvrInt_NOT_USED, // 23 + +#if defined(__AVR_ATmega3250__) || defined(__AVR_ATmega6450__) + gAvrInt_PCINT2, // 24 + gAvrInt_PCINT3, // 25 +#endif +}; + + +#endif + + +//************************************************************************************************** +#if defined(__AVR_ATmega32__ ) +#pragma mark __AVR_ATmega32__ + +#define _INTERRUPT_NAMES_DEFINED_ + +PGM_P gInterruptNameTable[] PROGMEM = +{ + + gAvrInt_RESET, // 1 + gAvrInt_INT0, // 2 + gAvrInt_INT1, // 3 + gAvrInt_INT2, // 4 + gAvrInt_TIMER2_COMP, // 5 + gAvrInt_TIMER2_OVF, // 6 + gAvrInt_TIMER1_CAPT, // 7 + gAvrInt_TIMER1_COMPA, // 8 + gAvrInt_TIMER1_COMPB, // 9 + gAvrInt_TIMER1_OVF, // 10 + gAvrInt_TIMER0_COMP, // 11 + gAvrInt_TIMER0_OVF, // 12 + gAvrInt_SPI_STC, // 13 + gAvrInt_USART_RX, // 14 + gAvrInt_USART_UDRE, // 15 + gAvrInt_USART_TX, // 16 + gAvrInt_ADC, // 17 + gAvrInt_EE_READY, // 18 + gAvrInt_ANALOG_COMP, // 19 + gAvrInt_TWI, // 20 + gAvrInt_SPM_READY, // 21 + +}; + + +#endif + +//************************************************************************************************** +#if defined(__AVR_ATmega32U4__) +#pragma mark __AVR_ATmega32U4__ +//* teensy 2.0 +//* http://www.pjrc.com/teensy/pinout.html +#define _INTERRUPT_NAMES_DEFINED_ + + +PGM_P gInterruptNameTable[] PROGMEM = +{ + + gAvrInt_RESET, // 1 + gAvrInt_INT0, // 2 + gAvrInt_INT1, // 3 + gAvrInt_INT2, // 4 + gAvrInt_INT3, // 5 + gAvrInt_RESERVED, // 6 + gAvrInt_RESERVED, // 7 + gAvrInt_INT6, // 8 + gAvrInt_RESERVED, // 9 + gAvrInt_PCINT0, // 10 + gAvrInt_USB_General, // 11 + gAvrInt_USB_Endpoint, // 12 + gAvrInt_WDT, // 13 + gAvrInt_RESERVED, // 14 + gAvrInt_RESERVED, // 15 + gAvrInt_RESERVED, // 16 + gAvrInt_TIMER1_CAPT, // 17 + gAvrInt_TIMER1_COMPA, // 18 + gAvrInt_TIMER1_COMPB, // 19 + gAvrInt_TIMER1_COMPC, // 20 + gAvrInt_TIMER1_OVF, // 21 + gAvrInt_TIMER0_COMPA, // 22 + gAvrInt_TIMER0_COMPB, // 23 + gAvrInt_TIMER0_OVF, // 24 + gAvrInt_SPI_STC, // 25 + + gAvrInt_USART1_RX, // 26 + gAvrInt_USART1_UDRE, // 27 + gAvrInt_USART1_TX, // 28 + gAvrInt_ANALOG_COMP, // 29 + + gAvrInt_ADC, // 30 + gAvrInt_EE_READY, // 31 + + gAvrInt_TIMER3_CAPT, // 32 + gAvrInt_TIMER3_COMPA, // 33 + gAvrInt_TIMER3_COMPB, // 34 + gAvrInt_TIMER3_COMPC, // 35 + gAvrInt_TIMER3_OVF, // 36 + gAvrInt_TWI, // 37 + gAvrInt_SPM_READY, // 38 + + gAvrInt_TIMER4_COMPA, // 39 + gAvrInt_TIMER4_COMPB, // 40 + gAvrInt_TIMER4_COMPD, // 41 + gAvrInt_TIMER4_OVF, // 42 + gAvrInt_TIMER4_FPF, // 43 +}; + +#endif + +//************************************************************************************************** +#if defined(__AVR_AT90USB1286__) +#pragma mark __AVR_AT90USB1286__ +//* teensy++ 2.0 +//* http://www.pjrc.com/teensy/pinout.html +#define _INTERRUPT_NAMES_DEFINED_ + + +PGM_P gInterruptNameTable[] PROGMEM = +{ + + gAvrInt_RESET, // 1 + gAvrInt_INT0, // 2 + gAvrInt_INT1, // 3 + gAvrInt_INT2, // 4 + gAvrInt_INT3, // 5 + gAvrInt_INT4, // 6 + gAvrInt_INT5, // 7 + gAvrInt_INT6, // 8 + gAvrInt_INT7, // 9 + gAvrInt_PCINT0, // 10 + gAvrInt_USB_General, // 11 + gAvrInt_USB_Endpoint, // 12 + gAvrInt_WDT, // 13 + gAvrInt_TIMER2_COMPA, // 14 + gAvrInt_TIMER2_COMPB, // 15 + gAvrInt_TIMER2_OVF, // 16 + gAvrInt_TIMER1_CAPT, // 17 + gAvrInt_TIMER1_COMPA, // 18 + gAvrInt_TIMER1_COMPB, // 19 + gAvrInt_TIMER1_COMPC, // 20 + gAvrInt_TIMER1_OVF, // 21 + gAvrInt_TIMER0_COMPA, // 22 + gAvrInt_TIMER0_COMPB, // 23 + gAvrInt_TIMER0_OVF, // 24 + gAvrInt_SPI_STC, // 25 + + gAvrInt_USART1_RX, // 26 + gAvrInt_USART1_UDRE, // 27 + gAvrInt_USART1_TX, // 28 + gAvrInt_ANALOG_COMP, // 29 + + gAvrInt_ADC, // 30 + gAvrInt_EE_READY, // 31 + + gAvrInt_TIMER3_CAPT, // 32 + gAvrInt_TIMER3_COMPA, // 33 + gAvrInt_TIMER3_COMPB, // 34 + gAvrInt_TIMER3_COMPC, // 35 + gAvrInt_TIMER3_OVF, // 36 + gAvrInt_TWI, // 37 + gAvrInt_SPM_READY, // 38 + +}; + +#endif + + + + +//************************************************************************************************** +#if defined(__AVR_ATmega128__) +#pragma mark __AVR_ATmega128__ +#define _INTERRUPT_NAMES_DEFINED_ + + +PGM_P gInterruptNameTable[] PROGMEM = +{ + + gAvrInt_RESET, // 1 + gAvrInt_INT0, // 2 + gAvrInt_INT1, // 3 + gAvrInt_INT2, // 4 + gAvrInt_INT3, // 5 + gAvrInt_INT4, // 6 + gAvrInt_INT5, // 7 + gAvrInt_INT6, // 8 + gAvrInt_INT7, // 9 + gAvrInt_TIMER2_COMP, // 10 + gAvrInt_TIMER2_OVF, // 11 + gAvrInt_TIMER1_CAPT, // 12 + gAvrInt_TIMER1_COMPA, // 13 + gAvrInt_TIMER1_COMPB, // 14 + gAvrInt_TIMER1_OVF, // 15 + gAvrInt_TIMER0_COMP, // 16 + gAvrInt_TIMER0_OVF, // 17 + gAvrInt_SPI_STC, // 18 + gAvrInt_USART0_RX, // 19 + gAvrInt_USART0_UDRE, // 20 + gAvrInt_USART0_TX, // 21 + gAvrInt_ADC, // 22 + gAvrInt_EE_READY, // 23 + gAvrInt_ANALOG_COMP, // 24 + gAvrInt_TIMER1_COMPC, // 25 + gAvrInt_TIMER3_CAPT, // 26 + gAvrInt_TIMER3_COMPA, // 27 + gAvrInt_TIMER3_COMPB, // 28 + gAvrInt_TIMER3_COMPC, // 29 + gAvrInt_TIMER3_OVF, // 30 + gAvrInt_USART1_RX, // 31 + gAvrInt_USART1_UDRE, // 32 + gAvrInt_USART1_TX, // 33 + gAvrInt_TWI, // 34 + gAvrInt_SPM_READY, // 35 + +}; + +#endif + +#if !defined(_INTERRUPT_NAMES_DEFINED_) + #warning No interrupt string defs for this cpu +#endif \ No newline at end of file diff --git a/test/ardmake/hardware/bootloaders/stk500v2/command.h b/test/ardmake/hardware/bootloaders/stk500v2/command.h new file mode 100644 index 0000000..03b1b38 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/stk500v2/command.h @@ -0,0 +1,114 @@ +//**** ATMEL AVR - A P P L I C A T I O N N O T E ************************ +//* +//* Title: AVR068 - STK500 Communication Protocol +//* Filename: command.h +//* Version: 1.0 +//* Last updated: 31.01.2005 +//* +//* Support E-mail: avr@atmel.com +//* +//************************************************************************** + +// *****************[ STK message constants ]*************************** + +#define MESSAGE_START 0x1B //= ESC = 27 decimal +#define TOKEN 0x0E + +// *****************[ STK general command constants ]************************** + +#define CMD_SIGN_ON 0x01 +#define CMD_SET_PARAMETER 0x02 +#define CMD_GET_PARAMETER 0x03 +#define CMD_SET_DEVICE_PARAMETERS 0x04 +#define CMD_OSCCAL 0x05 +#define CMD_LOAD_ADDRESS 0x06 +#define CMD_FIRMWARE_UPGRADE 0x07 + + +// *****************[ STK ISP command constants ]****************************** + +#define CMD_ENTER_PROGMODE_ISP 0x10 +#define CMD_LEAVE_PROGMODE_ISP 0x11 +#define CMD_CHIP_ERASE_ISP 0x12 +#define CMD_PROGRAM_FLASH_ISP 0x13 +#define CMD_READ_FLASH_ISP 0x14 +#define CMD_PROGRAM_EEPROM_ISP 0x15 +#define CMD_READ_EEPROM_ISP 0x16 +#define CMD_PROGRAM_FUSE_ISP 0x17 +#define CMD_READ_FUSE_ISP 0x18 +#define CMD_PROGRAM_LOCK_ISP 0x19 +#define CMD_READ_LOCK_ISP 0x1A +#define CMD_READ_SIGNATURE_ISP 0x1B +#define CMD_READ_OSCCAL_ISP 0x1C +#define CMD_SPI_MULTI 0x1D + +// *****************[ STK PP command constants ]******************************* + +#define CMD_ENTER_PROGMODE_PP 0x20 +#define CMD_LEAVE_PROGMODE_PP 0x21 +#define CMD_CHIP_ERASE_PP 0x22 +#define CMD_PROGRAM_FLASH_PP 0x23 +#define CMD_READ_FLASH_PP 0x24 +#define CMD_PROGRAM_EEPROM_PP 0x25 +#define CMD_READ_EEPROM_PP 0x26 +#define CMD_PROGRAM_FUSE_PP 0x27 +#define CMD_READ_FUSE_PP 0x28 +#define CMD_PROGRAM_LOCK_PP 0x29 +#define CMD_READ_LOCK_PP 0x2A +#define CMD_READ_SIGNATURE_PP 0x2B +#define CMD_READ_OSCCAL_PP 0x2C + +#define CMD_SET_CONTROL_STACK 0x2D + +// *****************[ STK HVSP command constants ]***************************** + +#define CMD_ENTER_PROGMODE_HVSP 0x30 +#define CMD_LEAVE_PROGMODE_HVSP 0x31 +#define CMD_CHIP_ERASE_HVSP 0x32 +#define CMD_PROGRAM_FLASH_HVSP ` 0x33 +#define CMD_READ_FLASH_HVSP 0x34 +#define CMD_PROGRAM_EEPROM_HVSP 0x35 +#define CMD_READ_EEPROM_HVSP 0x36 +#define CMD_PROGRAM_FUSE_HVSP 0x37 +#define CMD_READ_FUSE_HVSP 0x38 +#define CMD_PROGRAM_LOCK_HVSP 0x39 +#define CMD_READ_LOCK_HVSP 0x3A +#define CMD_READ_SIGNATURE_HVSP 0x3B +#define CMD_READ_OSCCAL_HVSP 0x3C + +// *****************[ STK status constants ]*************************** + +// Success +#define STATUS_CMD_OK 0x00 + +// Warnings +#define STATUS_CMD_TOUT 0x80 +#define STATUS_RDY_BSY_TOUT 0x81 +#define STATUS_SET_PARAM_MISSING 0x82 + +// Errors +#define STATUS_CMD_FAILED 0xC0 +#define STATUS_CKSUM_ERROR 0xC1 +#define STATUS_CMD_UNKNOWN 0xC9 + +// *****************[ STK parameter constants ]*************************** +#define PARAM_BUILD_NUMBER_LOW 0x80 +#define PARAM_BUILD_NUMBER_HIGH 0x81 +#define PARAM_HW_VER 0x90 +#define PARAM_SW_MAJOR 0x91 +#define PARAM_SW_MINOR 0x92 +#define PARAM_VTARGET 0x94 +#define PARAM_VADJUST 0x95 +#define PARAM_OSC_PSCALE 0x96 +#define PARAM_OSC_CMATCH 0x97 +#define PARAM_SCK_DURATION 0x98 +#define PARAM_TOPCARD_DETECT 0x9A +#define PARAM_STATUS 0x9C +#define PARAM_DATA 0x9D +#define PARAM_RESET_POLARITY 0x9E +#define PARAM_CONTROLLER_INIT 0x9F + +// *****************[ STK answer constants ]*************************** + +#define ANSWER_CKSUM_ERROR 0xB0 + diff --git a/test/ardmake/hardware/bootloaders/stk500v2/stk500boot.c b/test/ardmake/hardware/bootloaders/stk500v2/stk500boot.c new file mode 100644 index 0000000..13dec89 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/stk500v2/stk500boot.c @@ -0,0 +1,1996 @@ +/***************************************************************************** +Title: STK500v2 compatible bootloader + Modified for Wiring board ATMega128-16MHz +Author: Peter Fleury http://jump.to/fleury +File: $Id: stk500boot.c,v 1.11 2006/06/25 12:39:17 peter Exp $ +Compiler: avr-gcc 3.4.5 or 4.1 / avr-libc 1.4.3 +Hardware: All AVRs with bootloader support, tested with ATmega8 +License: GNU General Public License + +Modified: Worapoht Kornkaewwattanakul http://www.avride.com +Date: 17 October 2007 +Update: 1st, 29 Dec 2007 : Enable CMD_SPI_MULTI but ignore unused command by return 0x00 byte response.. +Compiler: WINAVR20060421 +Description: add timeout feature like previous Wiring bootloader + +DESCRIPTION: + This program allows an AVR with bootloader capabilities to + read/write its own Flash/EEprom. To enter Programming mode + an input pin is checked. If this pin is pulled low, programming mode + is entered. If not, normal execution is done from $0000 + "reset" vector in Application area. + Size fits into a 1024 word bootloader section + when compiled with avr-gcc 4.1 + (direct replace on Wiring Board without fuse setting changed) + +USAGE: + - Set AVR MCU type and clock-frequency (F_CPU) in the Makefile. + - Set baud rate below (AVRISP only works with 115200 bps) + - compile/link the bootloader with the supplied Makefile + - program the "Boot Flash section size" (BOOTSZ fuses), + for boot-size 1024 words: program BOOTSZ01 + - enable the BOOT Reset Vector (program BOOTRST) + - Upload the hex file to the AVR using any ISP programmer + - Program Boot Lock Mode 3 (program BootLock 11 and BootLock 12 lock bits) // (leave them) + - Reset your AVR while keeping PROG_PIN pulled low // (for enter bootloader by switch) + - Start AVRISP Programmer (AVRStudio/Tools/Program AVR) + - AVRISP will detect the bootloader + - Program your application FLASH file and optional EEPROM file using AVRISP + +Note: + Erasing the device without flashing, through AVRISP GUI button "Erase Device" + is not implemented, due to AVRStudio limitations. + Flash is always erased before programming. + + AVRdude: + Please uncomment #define REMOVE_CMD_SPI_MULTI when using AVRdude. + Comment #define REMOVE_PROGRAM_LOCK_BIT_SUPPORT to reduce code size + Read Fuse Bits and Read/Write Lock Bits is not supported + +NOTES: + Based on Atmel Application Note AVR109 - Self-programming + Based on Atmel Application Note AVR068 - STK500v2 Protocol + +LICENSE: + Copyright (C) 2006 Peter Fleury + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + +*****************************************************************************/ + +//************************************************************************ +//* Edit History +//************************************************************************ +//* Jul 7, 2010 = Mark Sproul msproul@skycharoit.com +//* Jul 7, 2010 Working on mega2560. No Auto-restart +//* Jul 7, 2010 Switched to 8K bytes (4K words) so that we have room for the monitor +//* Jul 8, 2010 Found older version of source that had auto restart, put that code back in +//* Jul 8, 2010 Adding monitor code +//* Jul 11, 2010 Added blinking LED while waiting for download to start +//* Jul 11, 2010 Added EEPROM test +//* Jul 29, 2010 Added recchar_timeout for timing out on bootloading +//* Aug 23, 2010 Added support for atmega2561 +//* Aug 26, 2010 Removed support for BOOT_BY_SWITCH +//************************************************************************ + + + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "command.h" + + +#if defined(_MEGA_BOARD_) || defined(_BOARD_AMBER128_) || defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) || defined(__AVR_ATmega2561__) + #define ENABLE_MONITOR + static void RunMonitor(void); +#endif + +//#define _DEBUG_SERIAL_ +//#define _DEBUG_WITH_LEDS_ + + +/* + * Uncomment the following lines to save code space + */ +//#define REMOVE_PROGRAM_LOCK_BIT_SUPPORT // disable program lock bits +//#define REMOVE_BOOTLOADER_LED // no LED to show active bootloader +//#define REMOVE_CMD_SPI_MULTI // disable processing of SPI_MULTI commands, Remark this line for AVRDUDE +// + + + +//************************************************************************ +//* LED on pin "PROGLED_PIN" on port "PROGLED_PORT" +//* indicates that bootloader is active +//* PG2 -> LED on Wiring board +//************************************************************************ +#define BLINK_LED_WHILE_WAITING + +#ifdef _MEGA_BOARD_ + #define PROGLED_PORT PORTB + #define PROGLED_DDR DDRB + #define PROGLED_PIN PINB7 +#elif defined( _BOARD_AMBER128_ ) + //* this is for the amber 128 http://www.soc-robotics.com/ + //* onbarod led is PORTE4 + #define PROGLED_PORT PORTD + #define PROGLED_DDR DDRD + #define PROGLED_PIN PINE7 +#elif defined( _CEREBOTPLUS_BOARD_ ) + //* this is for the Cerebot 2560 board + //* onbarod leds are on PORTE4-7 + #define PROGLED_PORT PORTE + #define PROGLED_DDR DDRE + #define PROGLED_PIN PINE7 +#elif defined( _PENGUINO_ ) + //* this is for the Penguino + //* onbarod led is PORTE4 + #define PROGLED_PORT PORTC + #define PROGLED_DDR DDRC + #define PROGLED_PIN PINC6 +#elif defined( _ANDROID_2561_ ) || defined( __AVR_ATmega2561__ ) + //* this is for the Boston Android 2561 + //* onbarod led is PORTE4 + #define PROGLED_PORT PORTA + #define PROGLED_DDR DDRA + #define PROGLED_PIN PINA3 +#else + #define PROGLED_PORT PORTG + #define PROGLED_DDR DDRG + #define PROGLED_PIN PING2 +#endif + + + +/* + * define CPU frequency in Mhz here if not defined in Makefile + */ +#ifndef F_CPU + #define F_CPU 16000000UL +#endif + +/* + * UART Baudrate, AVRStudio AVRISP only accepts 115200 bps + */ + +#ifndef BAUDRATE + #define BAUDRATE 115200 +#endif + +/* + * Enable (1) or disable (0) USART double speed operation + */ +#ifndef UART_BAUDRATE_DOUBLE_SPEED + #if defined (__AVR_ATmega32__) + #define UART_BAUDRATE_DOUBLE_SPEED 0 + #else + #define UART_BAUDRATE_DOUBLE_SPEED 1 + #endif +#endif + +/* + * HW and SW version, reported to AVRISP, must match version of AVRStudio + */ +#define CONFIG_PARAM_BUILD_NUMBER_LOW 0 +#define CONFIG_PARAM_BUILD_NUMBER_HIGH 0 +#define CONFIG_PARAM_HW_VER 0x0F +#define CONFIG_PARAM_SW_MAJOR 2 +#define CONFIG_PARAM_SW_MINOR 0x0A + +/* + * Calculate the address where the bootloader starts from FLASHEND and BOOTSIZE + * (adjust BOOTSIZE below and BOOTLOADER_ADDRESS in Makefile if you want to change the size of the bootloader) + */ +//#define BOOTSIZE 1024 +#if FLASHEND > 0x0F000 + #define BOOTSIZE 8192 +#else + #define BOOTSIZE 2048 +#endif + +#define APP_END (FLASHEND -(2*BOOTSIZE) + 1) + +/* + * Signature bytes are not available in avr-gcc io_xxx.h + */ +#if defined (__AVR_ATmega8__) + #define SIGNATURE_BYTES 0x1E9307 +#elif defined (__AVR_ATmega16__) + #define SIGNATURE_BYTES 0x1E9403 +#elif defined (__AVR_ATmega32__) + #define SIGNATURE_BYTES 0x1E9502 +#elif defined (__AVR_ATmega8515__) + #define SIGNATURE_BYTES 0x1E9306 +#elif defined (__AVR_ATmega8535__) + #define SIGNATURE_BYTES 0x1E9308 +#elif defined (__AVR_ATmega162__) + #define SIGNATURE_BYTES 0x1E9404 +#elif defined (__AVR_ATmega128__) + #define SIGNATURE_BYTES 0x1E9702 +#elif defined (__AVR_ATmega1280__) + #define SIGNATURE_BYTES 0x1E9703 +#elif defined (__AVR_ATmega2560__) + #define SIGNATURE_BYTES 0x1E9801 +#elif defined (__AVR_ATmega2561__) + #define SIGNATURE_BYTES 0x1e9802 +#else + #error "no signature definition for MCU available" +#endif + + +#if defined(__AVR_ATmega8__) || defined(__AVR_ATmega16__) || defined(__AVR_ATmega32__) \ + || defined(__AVR_ATmega8515__) || defined(__AVR_ATmega8535__) + /* ATMega8 with one USART */ + #define UART_BAUD_RATE_LOW UBRRL + #define UART_STATUS_REG UCSRA + #define UART_CONTROL_REG UCSRB + #define UART_ENABLE_TRANSMITTER TXEN + #define UART_ENABLE_RECEIVER RXEN + #define UART_TRANSMIT_COMPLETE TXC + #define UART_RECEIVE_COMPLETE RXC + #define UART_DATA_REG UDR + #define UART_DOUBLE_SPEED U2X + +#elif defined(__AVR_ATmega64__) || defined(__AVR_ATmega128__) || defined(__AVR_ATmega162__) \ + || defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) || defined(__AVR_ATmega2561__) + /* ATMega with two USART, use UART0 */ + #define UART_BAUD_RATE_LOW UBRR0L + #define UART_STATUS_REG UCSR0A + #define UART_CONTROL_REG UCSR0B + #define UART_ENABLE_TRANSMITTER TXEN0 + #define UART_ENABLE_RECEIVER RXEN0 + #define UART_TRANSMIT_COMPLETE TXC0 + #define UART_RECEIVE_COMPLETE RXC0 + #define UART_DATA_REG UDR0 + #define UART_DOUBLE_SPEED U2X0 +#else + #error "no UART definition for MCU available" +#endif + + + +/* + * Macro to calculate UBBR from XTAL and baudrate + */ +#if defined(__AVR_ATmega32__) && UART_BAUDRATE_DOUBLE_SPEED + #define UART_BAUD_SELECT(baudRate,xtalCpu) ((xtalCpu / 4 / baudRate - 1) / 2) +#elif defined(__AVR_ATmega32__) + #define UART_BAUD_SELECT(baudRate,xtalCpu) ((xtalCpu / 8 / baudRate - 1) / 2) +#elif UART_BAUDRATE_DOUBLE_SPEED + #define UART_BAUD_SELECT(baudRate,xtalCpu) (((float)(xtalCpu))/(((float)(baudRate))*8.0)-1.0+0.5) +#else + #define UART_BAUD_SELECT(baudRate,xtalCpu) (((float)(xtalCpu))/(((float)(baudRate))*16.0)-1.0+0.5) +#endif + + +/* + * States used in the receive state machine + */ +#define ST_START 0 +#define ST_GET_SEQ_NUM 1 +#define ST_MSG_SIZE_1 2 +#define ST_MSG_SIZE_2 3 +#define ST_GET_TOKEN 4 +#define ST_GET_DATA 5 +#define ST_GET_CHECK 6 +#define ST_PROCESS 7 + +/* + * use 16bit address variable for ATmegas with <= 64K flash + */ +#if defined(RAMPZ) + typedef uint32_t address_t; +#else + typedef uint16_t address_t; +#endif + +/* + * function prototypes + */ +static void sendchar(char c); +static unsigned char recchar(void); + +/* + * since this bootloader is not linked against the avr-gcc crt1 functions, + * to reduce the code size, we need to provide our own initialization + */ +void __jumpMain (void) __attribute__ ((naked)) __attribute__ ((section (".init9"))); +#include + +//#define SPH_REG 0x3E +//#define SPL_REG 0x3D + +//***************************************************************************** +void __jumpMain(void) +{ +//* July 17, 2010 Added stack pointer initialzation +//* the first line did not do the job on the ATmega128 + + asm volatile ( ".set __stack, %0" :: "i" (RAMEND) ); + +// ldi r16,high(RAMEND) +// out SPH,r16 ; Set stack pointer to top of RAM + +// asm volatile ( "ldi 16, 0x10"); + asm volatile ( "ldi 16, %0" :: "i" (RAMEND >> 8) ); +// asm volatile ( "out 0x3E,16"); +// asm volatile ( "out %0,16" :: "i" (SPH_REG) ); + asm volatile ( "out %0,16" :: "i" (AVR_STACK_POINTER_HI_ADDR) ); + +// asm volatile ( "ldi 16, 0x00"); + asm volatile ( "ldi 16, %0" :: "i" (RAMEND & 0x0ff) ); +// asm volatile ( "out 0x3d,16"); +// asm volatile ( "out %0,16" :: "i" (SPL_REG) ); + asm volatile ( "out %0,16" :: "i" (AVR_STACK_POINTER_LO_ADDR) ); + + + + asm volatile ( "clr __zero_reg__" ); // GCC depends on register r1 set to 0 + asm volatile ( "out %0, __zero_reg__" :: "I" (_SFR_IO_ADDR(SREG)) ); // set SREG to 0 +// asm volatile ( "rjmp main"); // jump to main() + asm volatile ( "jmp main"); // jump to main() +} + + +//***************************************************************************** +void delay_ms(unsigned int timedelay) +{ + unsigned int i; + for (i=0;i> 1) +//***************************************************************************** +static unsigned char recchar_timeout(void) +{ +uint32_t count = 0; + + while (!(UART_STATUS_REG & (1 << UART_RECEIVE_COMPLETE))) + { + // wait for data + count++; + if (count > MAX_TIME_COUNT) + { + unsigned int data; + #if (FLASHEND > 0x0FFFF) + data = pgm_read_word_far(0); //* get the first word of the user program + #else + data = pgm_read_word_near(0); //* get the first word of the user program + #endif + if (data != 0xffff) //* make sure its valid before jumping to it. + { + asm volatile( + "clr r30 \n\t" + "clr r31 \n\t" + "ijmp \n\t" + ); + } + count = 0; + } + } + return UART_DATA_REG; +} + + + +//***************************************************************************** +int main(void) +{ + address_t address = 0; + address_t eraseAddress = 0; + unsigned char msgParseState; + unsigned int ii = 0; + unsigned char checksum = 0; + unsigned char seqNum = 0; + unsigned int msgLength = 0; + unsigned char msgBuffer[285]; + unsigned char c, *p; + unsigned char isLeave = 0; + + unsigned long boot_timeout; + unsigned long boot_timer; + unsigned int boot_state; +#ifdef ENABLE_MONITOR + unsigned int exPointCntr = 0; +#endif + + + boot_timer = 0; + boot_state = 0; + +#ifdef BLINK_LED_WHILE_WAITING + boot_timeout = 20000; //* should be about 1 second +// boot_timeout = 170000; +#else + boot_timeout = 3500000; // 7 seconds , approx 2us per step when optimize "s" +#endif + /* + * Branch to bootloader or application code ? + */ + +#ifndef REMOVE_BOOTLOADER_LED + /* PROG_PIN pulled low, indicate with LED that bootloader is active */ + PROGLED_DDR |= (1< boot_timeout) + { + boot_state = 1; // (after ++ -> boot_state=2 bootloader timeout, jump to main 0x00000 ) + } + #ifdef BLINK_LED_WHILE_WAITING + if ((boot_timer % 7000) == 0) + { + //* toggle the LED + PROGLED_PORT ^= (1<>16) & 0x000000FF; + else if ( signatureIndex == 1 ) + answerByte = (SIGNATURE_BYTES >> 8) & 0x000000FF; + else + answerByte = SIGNATURE_BYTES & 0x000000FF; + } + else if ( msgBuffer[4] & 0x50 ) + { + answerByte = 0; //read fuse/lock bits not implemented, return dummy value + } + else + { + answerByte = 0; // for all others command are not implemented, return dummy value for AVRDUDE happy + // flag = 1; // Remark this line for AVRDUDE + } + if ( !flag ) + { + msgLength = 7; + msgBuffer[1] = STATUS_CMD_OK; + msgBuffer[2] = 0; + msgBuffer[3] = msgBuffer[4]; + msgBuffer[4] = 0; + msgBuffer[5] = answerByte; + msgBuffer[6] = STATUS_CMD_OK; + } + } + break; + #endif + case CMD_SIGN_ON: + msgLength = 11; + msgBuffer[1] = STATUS_CMD_OK; + msgBuffer[2] = 8; + msgBuffer[3] = 'A'; + msgBuffer[4] = 'V'; + msgBuffer[5] = 'R'; + msgBuffer[6] = 'I'; + msgBuffer[7] = 'S'; + msgBuffer[8] = 'P'; + msgBuffer[9] = '_'; + msgBuffer[10] = '2'; + break; + + case CMD_GET_PARAMETER: + { + unsigned char value; + + switch(msgBuffer[1]) + { + case PARAM_BUILD_NUMBER_LOW: + value = CONFIG_PARAM_BUILD_NUMBER_LOW; + break; + case PARAM_BUILD_NUMBER_HIGH: + value = CONFIG_PARAM_BUILD_NUMBER_HIGH; + break; + case PARAM_HW_VER: + value = CONFIG_PARAM_HW_VER; + break; + case PARAM_SW_MAJOR: + value = CONFIG_PARAM_SW_MAJOR; + break; + case PARAM_SW_MINOR: + value = CONFIG_PARAM_SW_MINOR; + break; + default: + value = 0; + break; + } + msgLength = 3; + msgBuffer[1] = STATUS_CMD_OK; + msgBuffer[2] = value; + } + break; + + case CMD_LEAVE_PROGMODE_ISP: + isLeave = 1; + //* fall thru + + case CMD_SET_PARAMETER: + case CMD_ENTER_PROGMODE_ISP: + msgLength = 2; + msgBuffer[1] = STATUS_CMD_OK; + break; + + case CMD_READ_SIGNATURE_ISP: + { + unsigned char signatureIndex = msgBuffer[4]; + unsigned char signature; + + if ( signatureIndex == 0 ) + signature = (SIGNATURE_BYTES >>16) & 0x000000FF; + else if ( signatureIndex == 1 ) + signature = (SIGNATURE_BYTES >> 8) & 0x000000FF; + else + signature = SIGNATURE_BYTES & 0x000000FF; + + msgLength = 4; + msgBuffer[1] = STATUS_CMD_OK; + msgBuffer[2] = signature; + msgBuffer[3] = STATUS_CMD_OK; + } + break; + + case CMD_READ_LOCK_ISP: + msgLength = 4; + msgBuffer[1] = STATUS_CMD_OK; + msgBuffer[2] = boot_lock_fuse_bits_get( GET_LOCK_BITS ); + msgBuffer[3] = STATUS_CMD_OK; + break; + + case CMD_READ_FUSE_ISP: + { + unsigned char fuseBits; + + if ( msgBuffer[2] == 0x50 ) + { + if ( msgBuffer[3] == 0x08 ) + fuseBits = boot_lock_fuse_bits_get( GET_EXTENDED_FUSE_BITS ); + else + fuseBits = boot_lock_fuse_bits_get( GET_LOW_FUSE_BITS ); + } + else + { + fuseBits = boot_lock_fuse_bits_get( GET_HIGH_FUSE_BITS ); + } + msgLength = 4; + msgBuffer[1] = STATUS_CMD_OK; + msgBuffer[2] = fuseBits; + msgBuffer[3] = STATUS_CMD_OK; + } + break; + + #ifndef REMOVE_PROGRAM_LOCK_BIT_SUPPORT + case CMD_PROGRAM_LOCK_ISP: + { + unsigned char lockBits = msgBuffer[4]; + + lockBits = (~lockBits) & 0x3C; // mask BLBxx bits + boot_lock_bits_set(lockBits); // and program it + boot_spm_busy_wait(); + + msgLength = 3; + msgBuffer[1] = STATUS_CMD_OK; + msgBuffer[2] = STATUS_CMD_OK; + } + break; + #endif + case CMD_CHIP_ERASE_ISP: + eraseAddress = 0; + msgLength = 2; + msgBuffer[1] = STATUS_CMD_OK; + break; + + case CMD_LOAD_ADDRESS: + #if defined(RAMPZ) + address = ( ((address_t)(msgBuffer[1])<<24)|((address_t)(msgBuffer[2])<<16)|((address_t)(msgBuffer[3])<<8)|(msgBuffer[4]) )<<1; + #else + address = ( ((msgBuffer[3])<<8)|(msgBuffer[4]) )<<1; //convert word to byte address + #endif + msgLength = 2; + msgBuffer[1] = STATUS_CMD_OK; + break; + + case CMD_PROGRAM_FLASH_ISP: + case CMD_PROGRAM_EEPROM_ISP: + { + unsigned int size = ((msgBuffer[1])<<8) | msgBuffer[2]; + unsigned char *p = msgBuffer+10; + unsigned int data; + unsigned char highByte, lowByte; + address_t tempaddress = address; + + + if ( msgBuffer[0] == CMD_PROGRAM_FLASH_ISP ) + { + // erase only main section (bootloader protection) + if (eraseAddress < APP_END ) + { + boot_page_erase(eraseAddress); // Perform page erase + boot_spm_busy_wait(); // Wait until the memory is erased. + eraseAddress += SPM_PAGESIZE; // point to next page to be erase + } + + /* Write FLASH */ + do { + lowByte = *p++; + highByte = *p++; + + data = (highByte << 8) | lowByte; + boot_page_fill(address,data); + + address = address + 2; // Select next word in memory + size -= 2; // Reduce number of bytes to write by two + } while (size); // Loop until all bytes written + + boot_page_write(tempaddress); + boot_spm_busy_wait(); + boot_rww_enable(); // Re-enable the RWW section + } + else + { + #if (!defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__) && !defined(__AVR_ATmega2561__)) + /* write EEPROM */ + do { + EEARL = address; // Setup EEPROM address + EEARH = (address >> 8); + address++; // Select next EEPROM byte + + EEDR = *p++; // get byte from buffer + EECR |= (1<> 8); //MSB + address += 2; // Select next word in memory + size -= 2; + }while (size); + } + else + { + /* Read EEPROM */ + do { + EEARL = address; // Setup EEPROM address + EEARH = ((address >> 8)); + address++; // Select next EEPROM byte + EECR |= (1<>8)&0xFF); + sendchar(c); + checksum ^= c; + + c = msgLength&0x00FF; + sendchar(c); + checksum ^= c; + + sendchar(TOKEN); + checksum ^= TOKEN; + + p = msgBuffer; + while ( msgLength ) + { + c = *p++; + sendchar(c); + checksum ^=c; + msgLength--; + } + sendchar(checksum); + seqNum++; + + #ifndef REMOVE_BOOTLOADER_LED + //* toggle the LED + PROGLED_PORT ^= (1< + + +base address = f000 +avrdude: Device signature = 0x1e9703 +avrdude: safemode: lfuse reads as FF +avrdude: safemode: hfuse reads as D8 +avrdude: safemode: efuse reads as F5 +avrdude> +*/ + +//************************************************************************ +#ifdef ENABLE_MONITOR +#include + +unsigned long gRamIndex; +unsigned long gFlashIndex; +unsigned long gEepromIndex; + + +#define true 1 +#define false 0 + +#if defined(__AVR_ATmega128__) + #define kCPU_NAME "ATmega128" +#elif defined(__AVR_ATmega1280__) + #define kCPU_NAME "ATmega1280" +#elif defined(__AVR_ATmega1281__) + #define kCPU_NAME "ATmega1281" +#elif defined(__AVR_ATmega2560__) + #define kCPU_NAME "ATmega2560" +#elif defined(__AVR_ATmega2561__) + #define kCPU_NAME "ATmega2561" +#endif + +#ifdef _VECTORS_SIZE + #define kInterruptVectorCount (_VECTORS_SIZE / 4) +#else + #define kInterruptVectorCount 23 +#endif + + +void PrintDecInt(int theNumber, int digitCnt); + +#ifdef kCPU_NAME + prog_char gTextMsg_CPU_Name[] PROGMEM = kCPU_NAME; +#else + prog_char gTextMsg_CPU_Name[] PROGMEM = "UNKNOWN"; +#endif + + prog_char gTextMsg_Explorer[] PROGMEM = "Arduino explorer stk500V2 by MLS"; + prog_char gTextMsg_Prompt[] PROGMEM = "Bootloader>"; + prog_char gTextMsg_HUH[] PROGMEM = "Huh?"; + prog_char gTextMsg_COMPILED_ON[] PROGMEM = "Compiled on = "; + prog_char gTextMsg_CPU_Type[] PROGMEM = "CPU Type = "; + prog_char gTextMsg_AVR_ARCH[] PROGMEM = "__AVR_ARCH__ = "; + prog_char gTextMsg_AVR_LIBC[] PROGMEM = "AVR LibC Ver = "; + prog_char gTextMsg_GCC_VERSION[] PROGMEM = "GCC Version = "; + prog_char gTextMsg_CPU_SIGNATURE[] PROGMEM = "CPU signature= "; + prog_char gTextMsg_FUSE_BYTE_LOW[] PROGMEM = "Low fuse = "; + prog_char gTextMsg_FUSE_BYTE_HIGH[] PROGMEM = "High fuse = "; + prog_char gTextMsg_FUSE_BYTE_EXT[] PROGMEM = "Ext fuse = "; + prog_char gTextMsg_FUSE_BYTE_LOCK[] PROGMEM = "Lock fuse = "; + prog_char gTextMsg_GCC_DATE_STR[] PROGMEM = __DATE__; + prog_char gTextMsg_AVR_LIBC_VER_STR[] PROGMEM = __AVR_LIBC_VERSION_STRING__; + prog_char gTextMsg_GCC_VERSION_STR[] PROGMEM = __VERSION__; + prog_char gTextMsg_VECTOR_HEADER[] PROGMEM = "V# ADDR op code instruction addr Interrupt"; + prog_char gTextMsg_noVector[] PROGMEM = "no vector"; + prog_char gTextMsg_rjmp[] PROGMEM = "rjmp "; + prog_char gTextMsg_jmp[] PROGMEM = "jmp "; + prog_char gTextMsg_WHAT_PORT[] PROGMEM = "What port:"; + prog_char gTextMsg_PortNotSupported[] PROGMEM = "Port not supported"; + prog_char gTextMsg_MustBeLetter[] PROGMEM = "Must be a letter"; + prog_char gTextMsg_SPACE[] PROGMEM = " "; + prog_char gTextMsg_WriteToEEprom[] PROGMEM = "Writting EE"; + prog_char gTextMsg_ReadingEEprom[] PROGMEM = "Reading EE"; + prog_char gTextMsg_EEPROMerrorCnt[] PROGMEM = "eeprom error count="; + prog_char gTextMsg_PORT[] PROGMEM = "PORT"; + + +//************************************************************************ +//* Help messages + prog_char gTextMsg_HELP_MSG_0[] PROGMEM = "0=Zero address ctrs"; + prog_char gTextMsg_HELP_MSG_QM[] PROGMEM = "?=CPU stats"; + prog_char gTextMsg_HELP_MSG_AT[] PROGMEM = "@=EEPROM test"; + prog_char gTextMsg_HELP_MSG_B[] PROGMEM = "B=Blink LED"; + prog_char gTextMsg_HELP_MSG_E[] PROGMEM = "E=Dump EEPROM"; + prog_char gTextMsg_HELP_MSG_F[] PROGMEM = "F=Dump FLASH"; + prog_char gTextMsg_HELP_MSG_H[] PROGMEM = "H=Help"; + prog_char gTextMsg_HELP_MSG_L[] PROGMEM = "L=List I/O Ports"; + prog_char gTextMsg_HELP_MSG_Q[] PROGMEM = "Q=Quit & jump to user pgm"; + prog_char gTextMsg_HELP_MSG_R[] PROGMEM = "R=Dump RAM"; + prog_char gTextMsg_HELP_MSG_V[] PROGMEM = "V=show interrupt Vectors"; + prog_char gTextMsg_HELP_MSG_Y[] PROGMEM = "Y=Port blink"; + + prog_char gTextMsg_END[] PROGMEM = "*"; + + +//************************************************************************ +void PrintFromPROGMEM(void *dataPtr, unsigned char offset) +{ +uint8_t ii; +char theChar; + + ii = offset; + theChar = 1; + + while (theChar != 0) + { + theChar = pgm_read_byte_far((uint32_t)dataPtr + ii); + if (theChar != 0) + { + sendchar(theChar); + } + ii++; + } +} + +//************************************************************************ +void PrintNewLine(void) +{ + sendchar(0x0d); + sendchar(0x0a); +} + + +//************************************************************************ +void PrintFromPROGMEMln(void *dataPtr, unsigned char offset) +{ + PrintFromPROGMEM(dataPtr, offset); + + PrintNewLine(); +} + + +//************************************************************************ +void PrintString(char *textString) +{ +char theChar; +int ii; + + theChar = 1; + ii = 0; + while (theChar != 0) + { + theChar = textString[ii]; + if (theChar != 0) + { + sendchar(theChar); + } + ii++; + } +} + +//************************************************************************ +void PrintHexByte(unsigned char theByte) +{ +char theChar; + + theChar = 0x30 + ((theByte >> 4) & 0x0f); + if (theChar > 0x39) + { + theChar += 7; + } + sendchar(theChar ); + + theChar = 0x30 + (theByte & 0x0f); + if (theChar > 0x39) + { + theChar += 7; + } + sendchar(theChar ); +} + +//************************************************************************ +void PrintDecInt(int theNumber, int digitCnt) +{ +int theChar; +int myNumber; + + myNumber = theNumber; + + if ((myNumber > 100) || (digitCnt >= 3)) + { + theChar = 0x30 + myNumber / 100; + sendchar(theChar ); + } + + if ((myNumber > 10) || (digitCnt >= 2)) + { + theChar = 0x30 + ((myNumber % 100) / 10 ); + sendchar(theChar ); + } + theChar = 0x30 + (myNumber % 10); + sendchar(theChar ); +} + + + + +//************************************************************************ +static void PrintCPUstats(void) +{ +unsigned char fuseByte; + + PrintFromPROGMEMln(gTextMsg_Explorer, 0); + + PrintFromPROGMEM(gTextMsg_COMPILED_ON, 0); + PrintFromPROGMEMln(gTextMsg_GCC_DATE_STR, 0); + + PrintFromPROGMEM(gTextMsg_CPU_Type, 0); + PrintFromPROGMEMln(gTextMsg_CPU_Name, 0); + + PrintFromPROGMEM(gTextMsg_AVR_ARCH, 0); + PrintDecInt(__AVR_ARCH__, 1); + PrintNewLine(); + + PrintFromPROGMEM(gTextMsg_GCC_VERSION, 0); + PrintFromPROGMEMln(gTextMsg_GCC_VERSION_STR, 0); + + //* these can be found in avr/version.h + PrintFromPROGMEM(gTextMsg_AVR_LIBC, 0); + PrintFromPROGMEMln(gTextMsg_AVR_LIBC_VER_STR, 0); + +#if defined(SIGNATURE_0) + PrintFromPROGMEM(gTextMsg_CPU_SIGNATURE, 0); + //* these can be found in avr/iomxxx.h + PrintHexByte(SIGNATURE_0); + PrintHexByte(SIGNATURE_1); + PrintHexByte(SIGNATURE_2); + PrintNewLine(); +#endif + + +#if defined(GET_LOW_FUSE_BITS) + //* fuse settings + PrintFromPROGMEM(gTextMsg_FUSE_BYTE_LOW, 0); + fuseByte = boot_lock_fuse_bits_get(GET_LOW_FUSE_BITS); + PrintHexByte(fuseByte); + PrintNewLine(); + + PrintFromPROGMEM(gTextMsg_FUSE_BYTE_HIGH, 0); + fuseByte = boot_lock_fuse_bits_get(GET_HIGH_FUSE_BITS); + PrintHexByte(fuseByte); + PrintNewLine(); + + PrintFromPROGMEM(gTextMsg_FUSE_BYTE_EXT, 0); + fuseByte = boot_lock_fuse_bits_get(GET_EXTENDED_FUSE_BITS); + PrintHexByte(fuseByte); + PrintNewLine(); + + PrintFromPROGMEM(gTextMsg_FUSE_BYTE_LOCK, 0); + fuseByte = boot_lock_fuse_bits_get(GET_LOCK_BITS); + PrintHexByte(fuseByte); + PrintNewLine(); + +#endif + +} + +#ifndef sbi + #define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit)) +#endif + +//************************************************************************ +int analogRead(uint8_t pin) +{ +uint8_t low, high; + + // set the analog reference (high two bits of ADMUX) and select the + // channel (low 4 bits). this also sets ADLAR (left-adjust result) + // to 0 (the default). +// ADMUX = (analog_reference << 6) | (pin & 0x07); + ADMUX = (1 << 6) | (pin & 0x07); + +#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) + // the MUX5 bit of ADCSRB selects whether we're reading from channels + // 0 to 7 (MUX5 low) or 8 to 15 (MUX5 high). + ADCSRB = (ADCSRB & ~(1 << MUX5)) | (((pin >> 3) & 0x01) << MUX5); +#endif + + // without a delay, we seem to read from the wrong channel + //delay(1); + + // start the conversion + sbi(ADCSRA, ADSC); + + // ADSC is cleared when the conversion finishes + while (bit_is_set(ADCSRA, ADSC)); + + // we have to read ADCL first; doing so locks both ADCL + // and ADCH until ADCH is read. reading ADCL second would + // cause the results of each conversion to be discarded, + // as ADCL and ADCH would be locked when it completed. + low = ADCL; + high = ADCH; + + // combine the two bytes + return (high << 8) | low; +} + +//************************************************************************ +static void BlinkLED(void) +{ + PROGLED_DDR |= (1< 0) + { + if (myAddressPointer > 0x10000) + { + PrintHexByte((myAddressPointer >> 16) & 0x00ff); + } + PrintHexByte((myAddressPointer >> 8) & 0x00ff); + PrintHexByte(myAddressPointer & 0x00ff); + sendchar(0x20); + sendchar('-'); + sendchar(0x20); + + asciiDump[0] = 0; + for (ii=0; ii<16; ii++) + { + switch(dumpWhat) + { + case kDUMP_FLASH: + theValue = pgm_read_byte_far(myAddressPointer); + break; + + case kDUMP_EEPROM: + theValue = eeprom_read_byte((void *)myAddressPointer); + break; + + case kDUMP_RAM: + theValue = ramPtr[myAddressPointer]; + break; + + } + PrintHexByte(theValue); + sendchar(0x20); + if ((theValue >= 0x20) && (theValue < 0x7f)) + { + asciiDump[ii % 16] = theValue; + } + else + { + asciiDump[ii % 16] = '.'; + } + + myAddressPointer++; + } + asciiDump[16] = 0; + PrintString(asciiDump); + PrintNewLine(); + + numRows--; + } +} + + + +//************************************************************************ +//* returns amount of extended memory +static void EEPROMtest(void) +{ +int ii; +char theChar; +char theEEPROMchar; +int errorCount; + + PrintFromPROGMEMln(gTextMsg_WriteToEEprom, 0); + PrintNewLine(); + ii = 0; + while (((theChar = pgm_read_byte_far(gTextMsg_Explorer + ii)) != '*') && (ii < 512)) + { + eeprom_write_byte((uint8_t *)ii, theChar); + if (theChar == 0) + { + PrintFromPROGMEM(gTextMsg_SPACE, 0); + } + else + { + sendchar(theChar); + } + ii++; + } + + //* no go back through and test + PrintNewLine(); + PrintNewLine(); + PrintFromPROGMEMln(gTextMsg_ReadingEEprom, 0); + PrintNewLine(); + errorCount = 0; + ii = 0; + while (((theChar = pgm_read_byte_far(gTextMsg_Explorer + ii)) != '*') && (ii < 512)) + { + theEEPROMchar = eeprom_read_byte((uint8_t *)ii); + if (theEEPROMchar == 0) + { + PrintFromPROGMEM(gTextMsg_SPACE, 0); + } + else + { + sendchar(theEEPROMchar); + } + if (theEEPROMchar != theChar) + { + errorCount++; + } + ii++; + } + PrintNewLine(); + PrintNewLine(); + PrintFromPROGMEM(gTextMsg_EEPROMerrorCnt, 0); + PrintDecInt(errorCount, 1); + PrintNewLine(); + PrintNewLine(); + + gEepromIndex = 0; //* set index back to zero for next eeprom dump + +} + + + +#if (FLASHEND > 0x08000) + #include "avrinterruptnames.h" + #ifndef _INTERRUPT_NAMES_DEFINED_ + #warning Interrupt vectors not defined + #endif +#endif + +//************************************************************************ +static void VectorDisplay(void) +{ +unsigned long byte1; +unsigned long byte2; +unsigned long byte3; +unsigned long byte4; +unsigned long word1; +unsigned long word2; +int vectorIndex; +unsigned long myMemoryPtr; +unsigned long wordMemoryAddress; +unsigned long realitiveAddr; +unsigned long myFullAddress; +unsigned long absoluteAddr; +#if defined(_INTERRUPT_NAMES_DEFINED_) + long stringPointer; +#endif + + myMemoryPtr = 0; + vectorIndex = 0; + PrintFromPROGMEMln(gTextMsg_CPU_Name, 0); + PrintFromPROGMEMln(gTextMsg_VECTOR_HEADER, 0); + // V# ADDR op code + // 1 - 0000 = C3 BB 00 00 rjmp 03BB >000776 RESET + while (vectorIndex < kInterruptVectorCount) + { + wordMemoryAddress = myMemoryPtr / 2; + // 01 - 0000 = 12 34 + PrintDecInt(vectorIndex + 1, 2); + sendchar(0x20); + sendchar('-'); + sendchar(0x20); + PrintHexByte((wordMemoryAddress >> 8) & 0x00ff); + PrintHexByte((wordMemoryAddress) & 0x00ff); + sendchar(0x20); + sendchar('='); + sendchar(0x20); + + + //* the AVR is LITTLE ENDIAN, swap the byte order + byte1 = pgm_read_byte_far(myMemoryPtr++); + byte2 = pgm_read_byte_far(myMemoryPtr++); + word1 = (byte2 << 8) + byte1; + + byte3 = pgm_read_byte_far(myMemoryPtr++); + byte4 = pgm_read_byte_far(myMemoryPtr++); + word2 = (byte4 << 8) + byte3; + + + PrintHexByte(byte2); + sendchar(0x20); + PrintHexByte(byte1); + sendchar(0x20); + PrintHexByte(byte4); + sendchar(0x20); + PrintHexByte(byte3); + sendchar(0x20); + + if (word1 == 0xffff) + { + PrintFromPROGMEM(gTextMsg_noVector, 0); + } + else if ((word1 & 0xc000) == 0xc000) + { + //* rjmp instruction + realitiveAddr = word1 & 0x3FFF; + absoluteAddr = wordMemoryAddress + realitiveAddr; //* add the offset to the current address + absoluteAddr = absoluteAddr << 1; //* multiply by 2 for byte address + + PrintFromPROGMEM(gTextMsg_rjmp, 0); + PrintHexByte((realitiveAddr >> 8) & 0x00ff); + PrintHexByte((realitiveAddr) & 0x00ff); + sendchar(0x20); + sendchar('>'); + PrintHexByte((absoluteAddr >> 16) & 0x00ff); + PrintHexByte((absoluteAddr >> 8) & 0x00ff); + PrintHexByte((absoluteAddr) & 0x00ff); + + } + else if ((word1 & 0xfE0E) == 0x940c) + { + //* jmp instruction, this is REALLY complicated, refer to the instruction manual (JMP) + myFullAddress = ((byte1 & 0x01) << 16) + + ((byte1 & 0xf0) << 17) + + ((byte2 & 0x01) << 21) + + word2; + + absoluteAddr = myFullAddress << 1; + + PrintFromPROGMEM(gTextMsg_jmp, 0); + PrintHexByte((myFullAddress >> 16) & 0x00ff); + PrintHexByte((myFullAddress >> 8) & 0x00ff); + PrintHexByte((myFullAddress) & 0x00ff); + sendchar(0x20); + sendchar('>'); + PrintHexByte((absoluteAddr >> 16) & 0x00ff); + PrintHexByte((absoluteAddr >> 8) & 0x00ff); + PrintHexByte((absoluteAddr) & 0x00ff); + } + + #if defined(_INTERRUPT_NAMES_DEFINED_) + sendchar(0x20); + stringPointer = pgm_read_word_far(&(gInterruptNameTable[vectorIndex])); + PrintFromPROGMEM((char *)stringPointer, 0); + #endif + PrintNewLine(); + + vectorIndex++; + } +} + +//************************************************************************ +static void PrintAvailablePort(char thePortLetter) +{ + PrintFromPROGMEM(gTextMsg_PORT, 0); + sendchar(thePortLetter); + PrintNewLine(); +} + +//************************************************************************ +static void ListAvailablePorts(void) +{ + +#ifdef DDRA + PrintAvailablePort('A'); +#endif + +#ifdef DDRB + PrintAvailablePort('B'); +#endif + +#ifdef DDRC + PrintAvailablePort('C'); +#endif + +#ifdef DDRD + PrintAvailablePort('D'); +#endif + +#ifdef DDRE + PrintAvailablePort('E'); +#endif + +#ifdef DDRF + PrintAvailablePort('F'); +#endif + +#ifdef DDRG + PrintAvailablePort('G'); +#endif + +#ifdef DDRH + PrintAvailablePort('H'); +#endif + +#ifdef DDRI + PrintAvailablePort('I'); +#endif + +#ifdef DDRJ + PrintAvailablePort('J'); +#endif + +#ifdef DDRK + PrintAvailablePort('K'); +#endif + +#ifdef DDRL + PrintAvailablePort('L'); +#endif + +} + +//************************************************************************ +static void AVR_PortOutput(void) +{ +char portLetter; +char getCharFlag; + + PrintFromPROGMEM(gTextMsg_WHAT_PORT, 0); + + portLetter = recchar(); + portLetter = portLetter & 0x5f; + sendchar(portLetter); + PrintNewLine(); + + if ((portLetter >= 'A') && (portLetter <= 'Z')) + { + getCharFlag = true; + switch(portLetter) + { + #ifdef DDRA + case 'A': + DDRA = 0xff; + while (!Serial_Available()) + { + PORTA ^= 0xff; + delay_ms(200); + } + PORTA = 0; + break; + #endif + + #ifdef DDRB + case 'B': + DDRB = 0xff; + while (!Serial_Available()) + { + PORTB ^= 0xff; + delay_ms(200); + } + PORTB = 0; + break; + #endif + + #ifdef DDRC + case 'C': + DDRC = 0xff; + while (!Serial_Available()) + { + PORTC ^= 0xff; + delay_ms(200); + } + PORTC = 0; + break; + #endif + + #ifdef DDRD + case 'D': + DDRD = 0xff; + while (!Serial_Available()) + { + PORTD ^= 0xff; + delay_ms(200); + } + PORTD = 0; + break; + #endif + + #ifdef DDRE + case 'E': + DDRE = 0xff; + while (!Serial_Available()) + { + PORTE ^= 0xff; + delay_ms(200); + } + PORTE = 0; + break; + #endif + + #ifdef DDRF + case 'F': + DDRF = 0xff; + while (!Serial_Available()) + { + PORTF ^= 0xff; + delay_ms(200); + } + PORTF = 0; + break; + #endif + + #ifdef DDRG + case 'G': + DDRG = 0xff; + while (!Serial_Available()) + { + PORTG ^= 0xff; + delay_ms(200); + } + PORTG = 0; + break; + #endif + + #ifdef DDRH + case 'H': + DDRH = 0xff; + while (!Serial_Available()) + { + PORTH ^= 0xff; + delay_ms(200); + } + PORTH = 0; + break; + #endif + + #ifdef DDRI + case 'I': + DDRI = 0xff; + while (!Serial_Available()) + { + PORTI ^= 0xff; + delay_ms(200); + } + PORTI = 0; + break; + #endif + + #ifdef DDRJ + case 'J': + DDRJ = 0xff; + while (!Serial_Available()) + { + PORTJ ^= 0xff; + delay_ms(200); + } + PORTJ = 0; + break; + #endif + + #ifdef DDRK + case 'K': + DDRK = 0xff; + while (!Serial_Available()) + { + PORTK ^= 0xff; + delay_ms(200); + } + PORTK = 0; + break; + #endif + + #ifdef DDRL + case 'L': + DDRL = 0xff; + while (!Serial_Available()) + { + PORTL ^= 0xff; + delay_ms(200); + } + PORTL = 0; + break; + #endif + + default: + PrintFromPROGMEMln(gTextMsg_PortNotSupported, 0); + getCharFlag = false; + break; + } + if (getCharFlag) + { + recchar(); + } + } + else + { + PrintFromPROGMEMln(gTextMsg_MustBeLetter, 0); + } +} + + +//******************************************************************* +static void PrintHelp(void) +{ + PrintFromPROGMEMln(gTextMsg_HELP_MSG_0, 0); + PrintFromPROGMEMln(gTextMsg_HELP_MSG_QM, 0); + PrintFromPROGMEMln(gTextMsg_HELP_MSG_AT, 0); + PrintFromPROGMEMln(gTextMsg_HELP_MSG_B, 0); + PrintFromPROGMEMln(gTextMsg_HELP_MSG_E, 0); + PrintFromPROGMEMln(gTextMsg_HELP_MSG_F, 0); + PrintFromPROGMEMln(gTextMsg_HELP_MSG_H, 0); + + PrintFromPROGMEMln(gTextMsg_HELP_MSG_L, 0); + PrintFromPROGMEMln(gTextMsg_HELP_MSG_Q, 0); + PrintFromPROGMEMln(gTextMsg_HELP_MSG_R, 0); + PrintFromPROGMEMln(gTextMsg_HELP_MSG_V, 0); + PrintFromPROGMEMln(gTextMsg_HELP_MSG_Y, 0); +} + +//************************************************************************ +static void RunMonitor(void) +{ +char keepGoing; +unsigned char theChar; +int ii, jj; + + for (ii=0; ii<5; ii++) + { + for (jj=0; jj<25; jj++) + { + sendchar('!'); + } + PrintNewLine(); + } + + gRamIndex = 0; + gFlashIndex = 0; + gEepromIndex = 0; + + PrintFromPROGMEMln(gTextMsg_Explorer, 0); + + keepGoing = 1; + while (keepGoing) + { + PrintFromPROGMEM(gTextMsg_Prompt, 0); + theChar = recchar(); + if (theChar >= 0x60) + { + theChar = theChar & 0x5F; + } + #if defined( _CEREBOTPLUS_BOARD_ ) + if (theChar == 0x5F) + { + + } + else + #endif + if (theChar >= 0x20) + { + sendchar(theChar); + sendchar(0x20); + } + + switch(theChar) + { + case '0': + PrintFromPROGMEMln(gTextMsg_HELP_MSG_0, 2); + gFlashIndex = 0; + gRamIndex = 0; + gEepromIndex = 0; + break; + + case '?': + PrintFromPROGMEMln(gTextMsg_HELP_MSG_QM, 2); + PrintCPUstats(); + break; + + case '@': + PrintFromPROGMEMln(gTextMsg_HELP_MSG_AT, 2); + EEPROMtest(); + break; + + case 'B': + PrintFromPROGMEMln(gTextMsg_HELP_MSG_B, 2); + BlinkLED(); + break; + + case 'E': + PrintFromPROGMEMln(gTextMsg_HELP_MSG_E, 2); + DumpHex(kDUMP_EEPROM, gEepromIndex, 16); + gEepromIndex += 256; + if (gEepromIndex > E2END) + { + gEepromIndex = 0; + } + break; + + case 'F': + PrintFromPROGMEMln(gTextMsg_HELP_MSG_F, 2); + DumpHex(kDUMP_FLASH, gFlashIndex, 16); + gFlashIndex += 256; + break; + + case 'H': + PrintFromPROGMEMln(gTextMsg_HELP_MSG_H, 2); + PrintHelp(); + break; + + case 'L': + PrintFromPROGMEMln(gTextMsg_HELP_MSG_L, 2); + ListAvailablePorts(); + break; + + case 'Q': + PrintFromPROGMEMln(gTextMsg_HELP_MSG_Q, 2); + keepGoing = false; + break; + + case 'R': + PrintFromPROGMEMln(gTextMsg_HELP_MSG_R, 2); + DumpHex(kDUMP_RAM, gRamIndex, 16); + gRamIndex += 256; + break; + + case 'V': + PrintFromPROGMEMln(gTextMsg_HELP_MSG_V, 2); + VectorDisplay(); + break; + + case 'Y': + PrintFromPROGMEMln(gTextMsg_HELP_MSG_Y, 2); + AVR_PortOutput(); + break; + + #if defined( _CEREBOTPLUS_BOARD_ ) + case 0x5F: + //* do nothing + break; + #endif + + default: + PrintFromPROGMEMln(gTextMsg_HUH, 0); + break; + } + } +} + +#endif + diff --git a/test/ardmake/hardware/bootloaders/stk500v2/stk500boot.ppg b/test/ardmake/hardware/bootloaders/stk500v2/stk500boot.ppg new file mode 100644 index 0000000..a8929d7 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/stk500v2/stk500boot.ppg @@ -0,0 +1 @@ + \ No newline at end of file diff --git a/test/ardmake/hardware/bootloaders/stk500v2/stk500boot_v2_mega2560.hex b/test/ardmake/hardware/bootloaders/stk500v2/stk500boot_v2_mega2560.hex new file mode 100644 index 0000000..4f36699 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/stk500v2/stk500boot_v2_mega2560.hex @@ -0,0 +1,513 @@ +:020000023000CC +:10E000000D94F6F20D941FF30D941FF30D941FF36E +:10E010000D941FF30D941FF30D941FF30D941FF334 +:10E020000D941FF30D941FF30D941FF30D941FF324 +:10E030000D941FF30D941FF30D941FF30D941FF314 +:10E040000D941FF30D941FF30D941FF30D941FF304 +:10E050000D941FF30D941FF30D941FF30D941FF3F4 +:10E060000D941FF30D941FF30D941FF30D941FF3E4 +:10E070000D941FF30D941FF30D941FF30D941FF3D4 +:10E080000D941FF30D941FF30D941FF30D941FF3C4 +:10E090000D941FF30D941FF30D941FF30D941FF3B4 +:10E0A0000D941FF30D941FF30D941FF30D941FF3A4 +:10E0B0000D941FF30D941FF30D941FF30D941FF394 +:10E0C0000D941FF30D941FF30D941FF30D941FF384 +:10E0D0000D941FF30D941FF30D941FF30D941FF374 +:10E0E0000D941FF341546D65676132353630004140 +:10E0F000726475696E6F206578706C6F72657220DE +:10E1000073746B3530305632206279204D4C530099 +:10E11000426F6F746C6F616465723E004875683F52 +:10E1200000436F6D70696C6564206F6E20203D2028 +:10E1300000435055205479706520202020203D2038 +:10E14000005F5F4156525F415243485F5F203D2070 +:10E1500000415652204C69624320566572203D2092 +:10E16000004743432056657273696F6E20203D203F +:10E1700000435055207369676E61747572653D2068 +:10E18000004C6F77206675736520202020203D208D +:10E1900000486967682066757365202020203D204F +:10E1A00000457874206675736520202020203D206E +:10E1B000004C6F636B2066757365202020203D2026 +:10E1C00000536570202039203230313000312E3636 +:10E1D0002E3700342E332E33005623202020414486 +:10E1E00044522020206F7020636F6465202020201F +:10E1F00020696E737472756374696F6E20616464F4 +:10E2000072202020496E74657272757074006E6F92 +:10E2100020766563746F7200726A6D702020006AE8 +:10E220006D7020005768617420706F72743A0050EE +:10E230006F7274206E6F7420737570706F72746576 +:10E2400064004D7573742062652061206C65747480 +:10E2500065720020005772697474696E67204545C5 +:10E260000052656164696E6720454500656570729E +:10E270006F6D206572726F7220636F756E743D00F2 +:10E28000504F525400303D5A65726F206164647281 +:10E290006573732063747273003F3D435055207360 +:10E2A0007461747300403D454550524F4D20746574 +:10E2B000737400423D426C696E6B204C45440045CE +:10E2C0003D44756D7020454550524F4D00463D44CC +:10E2D000756D7020464C41534800483D48656C7050 +:10E2E000004C3D4C69737420492F4F20506F72745D +:10E2F0007300513D517569742026206A756D702038 +:10E30000746F20757365722070676D00523D44759F +:10E310006D702052414D00563D73686F7720696ED5 +:10E320007465727275707420566563746F727300D1 +:10E33000593D506F727420626C696E6B002A0052F6 +:10E340004553455400494E543000494E543100491C +:10E350004E543200494E543300494E543400494E15 +:10E36000543500494E543600494E54370050434905 +:10E370004E5430005043494E5431005043494E549E +:10E3800032005744540054494D45523020434F4DBC +:10E3900050410054494D45523020434F4D504200AA +:10E3A00054494D455230204F56460054494D455230 +:10E3B0003120434150540054494D45523120434F80 +:10E3C0004D50410054494D45523120434F4D50422C +:10E3D0000054494D45523120434F4D50430054495C +:10E3E0004D455231204F56460054494D455232203A +:10E3F000434F4D50410054494D45523220434F4DFB +:10E4000050420054494D455232204F56460054491F +:10E410004D45523320434150540054494D455233E9 +:10E4200020434F4D50410054494D45523320434FF6 +:10E430004D50420054494D45523320434F4D5043B7 +:10E440000054494D455233204F56460054494D45DE +:10E45000523420434150540054494D4552342043D6 +:10E460004F4D50410054494D45523420434F4D507B +:10E47000420054494D45523420434F4D50430054BF +:10E48000494D455234204F56460054494D4552356A +:10E4900020434150540054494D45523520434F4D7F +:10E4A00050410054494D45523520434F4D50420094 +:10E4B00054494D45523520434F4D50430054494D2A +:10E4C000455235204F564600555341525430205244 +:10E4D000580055534152543020554452450055532D +:10E4E0004152543020545800555341525431205217 +:10E4F000580055534152543120554452450055530C +:10E5000041525431205458005553415254322052F4 +:10E5100058005553415254322055445245005553EA +:10E5200041525432205458005553415254332052D2 +:10E5300058005553415254332055445245005553C9 +:10E5400041525433205458005350492053544300EF +:10E5500041444300414E414C4F4720434F4D5000F2 +:10E560004545205245414459005457490053504DA8 +:10E57000205245414459002A003FE345E34AE34F16 +:10E58000E354E359E35EE363E368E36DE374E37B41 +:10E59000E382E3E9E3F6E303E4ABE3B7E3C4E3D107 +:10E5A000E3DEE386E393E3A0E348E5C8E4D2E4DEF8 +:10E5B000E454E550E560E50EE41AE427E434E44170 +:10E5C000E4E8E4F2E4FEE469E56DE54CE458E46572 +:10E5D000E472E47FE48AE496E4A3E4B0E4BDE408F2 +:10E5E000E512E51EE528E532E53EE50011241FBEF3 +:10E5F000CFEFD1E2DEBFCDBF01E00CBF12E0A0E063 +:10E60000B2E0EAEDFFEF03E00BBF02C007900D920E +:10E61000A030B107D9F712E0A0E0B2E001C01D922E +:10E62000AC30B107E1F70F94FBF40D94EBFF01E27E +:10E630000EBF0FEF0DBF11241FBE0D94FBF40D9400 +:10E6400000F020E030E040ED57E005C0FA013197DE +:10E65000F1F72F5F3F4F28173907C0F308959C014A +:10E66000442737FD4095542FDA01C901860F911DCB +:10E67000A11DB11DABBFFC018791882369F0809378 +:10E68000C6008091C00086FFFCCF8091C0008064EE +:10E690008093C0006F5FE8CF08958DE08093C6003F +:10E6A0008091C00086FFFCCF8091C0008064809381 +:10E6B000C0008AE08093C6008091C00086FFFCCF36 +:10E6C0008091C00080648093C00008950F942FF360 +:10E6D0000F944DF30895FC019081992359F0909384 +:10E6E000C6008091C00086FFFCCF8091C00080648E +:10E6F0008093C0003196992379F70895282F982F99 +:10E7000092959F70892F805D8A3308F0895F80938E +:10E71000C6008091C00086FFFCCF8091C00080645D +:10E720008093C000822F8F70982F905D9A3308F0ED +:10E73000995F9093C6008091C00086FFFCCF8091C6 +:10E74000C00080648093C00008959C01FB01853661 +:10E7500091051CF46330710594F0C90164E670E022 +:10E760000F948CFF605D7F4F6093C6008091C00066 +:10E7700086FFFCCF8091C00080648093C0002B3066 +:10E78000310514F43297B4F0C90164E670E00F94D7 +:10E790008CFF6AE070E00F948CFF605D7F4F6093A8 +:10E7A000C6008091C00086FFFCCF8091C0008064CD +:10E7B0008093C000C9016AE070E00F948CFFC0969E +:10E7C0008093C6008091C00086FFFCCF8091C0007E +:10E7D00080648093C0000895282F277020642093C0 +:10E7E0007C0020917B0086958695869590E08170CF +:10E7F000907033E0880F991F3A95E1F7277F282B17 +:10E8000020937B0080917A00806480937A008091CD +:10E810007A0086FDFCCF2091780040917900942FFA +:10E8200080E030E0282B392BC90108951F93182F61 +:10E8300080E892EE60E00F942FF31093C600809171 +:10E84000C00086FFFCCF8091C00080648093C00030 +:10E850000F944DF31F9108952F923F924F925F9224 +:10E860006F927F928F929F92AF92BF92CF92DF92E0 +:10E87000EF92FF920F931F93DF93CF93CDB7DEB745 +:10E8800062970FB6F894DEBF0FBECDBF382E622E52 +:10E89000CA01DB015C016D01772460E2262E2E01A6 +:10E8A0000894411C511C8BC081E0A81680E0B8067A +:10E8B00081E0C80680E0D80628F0C601AA27BB2759 +:10E8C0000F947EF3BB27AD2D9C2D8B2D0F947EF3E3 +:10E8D0008A2D0F947EF32092C6008091C00086FF9F +:10E8E000FCCF8091C00080648093C0009DE2909333 +:10E8F000C6008091C00086FFFCCF8091C00080647C +:10E900008093C0002092C6008091C00086FFFCCF9B +:10E910008091C00080648093C000198286017501D7 +:10E9200088249924A1E03A1651F03A1620F0B2E07A +:10E930003B1661F409C00BBFF701779007C0C70110 +:10E940000F94D5FF782E02C0F7017080872D0F94A9 +:10E950007EF32092C6008091C00086FFFCCF80919C +:10E96000C00080648093C000872D8052F401EF7056 +:10E97000F0708F3520F4E40DF51D708204C0E40DB5 +:10E98000F51D8EE280830894E11CF11C011D111D10 +:10E990000894811C911C90E18916910409F0C2CF62 +:10E9A00080E190E0A0E0B0E0A80EB91ECA1EDB1E18 +:10E9B000198AC2010F946BF30F944DF36A94662089 +:10E9C00009F072CF62960FB6F894DEBF0FBECDBFCE +:10E9D000CF91DF911F910F91FF90EF90DF90CF903B +:10E9E000BF90AF909F908F907F906F905F904F906F +:10E9F0003F902F9008952F923F924F925F926F9287 +:10EA00007F928F929F92AF92BF92CF92DF92EF92BE +:10EA1000FF920F931F93DF93CF93CDB7DEB7CD5304 +:10EA2000D1400FB6F894DEBF0FBECDBF279A2F9A04 +:10EA30008091C00082608093C00080E18093C40018 +:10EA400088E18093C1000000EE24FF248701B4E038 +:10EA5000AB2EB12CCC24DD2424C0C5010197F1F7E5 +:10EA60000894E11CF11C011D111D21E2E2162EE4A7 +:10EA7000F20620E0020720E0120718F0A1E0CA2EFB +:10EA8000D12CC801B70128E53BE140E050E00F94EC +:10EA90009FFF611571058105910519F485B18058B5 +:10EAA00085B98091C00087FD03C0C114D104A9F2CB +:10EAB000A6014F5F5F4FC25EDE4F59834883CE5140 +:10EAC000D140C25EDE4F68817981CE51D140613044 +:10EAD000710511F00D946EFFC05DDE4F1982188232 +:10EAE000C053D14060E0C15DDE4F1882CF52D140AB +:10EAF000AA24BB24C05EDE4F188219821A821B82B0 +:10EB0000C052D140CE5CDE4F188219821A821B821D +:10EB1000C253D14080E090E0A0E0B0E0ABBFFC0188 +:10EB2000A791B691C45CDE4FB983A883CC53D14082 +:10EB30000D9469FFC25EDE4FE881F981CE51D1406C +:10EB4000319709F52091C600C25EDE4F1982188206 +:10EB5000CE51D14022C02F5F3F4F4F4F5F4F2130EA +:10EB6000F2E13F07FAE74F07F0E05F0780F0C45C8F +:10EB7000DE4F08811981CC53D1400F5F1F4F19F030 +:10EB8000EE27FF27099420E030E040E050E080913C +:10EB9000C00087FFE0CF2091C600213209F094C663 +:10EBA0000894A11CB11C33E0A316B10409F08EC671 +:10EBB00000E010E018C041E24093C6008091C00020 +:10EBC00086FFFCCF8091C00080648093C0002F5FDF +:10EBD0003F4F2931310579F70F944DF30F5F1F4FE8 +:10EBE0000530110519F020E030E0E5CF1092080261 +:10EBF0001092090210920A0210920B021092040263 +:10EC00001092050210920602109207021092000262 +:10EC10001092010210920202109203028FEE90EE07 +:10EC200060E00F9466F380E191EE60E00F942FF3C3 +:10EC30008091C00087FFFCCF9091C600903608F00D +:10EC40009F759032B8F09093C6008091C00086FF07 +:10EC5000FCCF8091C00080648093C00080E28093EC +:10EC6000C6008091C00086FFFCCF8091C000806408 +:10EC70008093C000983409F4DBC19934B8F492341D +:10EC800009F45DC1933458F4903319F1903308F4CA +:10EC900018C69F33A1F1903409F013C6BDC0953456 +:10ECA00009F474C1963409F00CC69CC1923509F47C +:10ECB0002FC2933538F49C3409F4F9C1913509F029 +:10ECC00000C61CC2963509F449C2993509F0F9C548 +:10ECD0009CC485E892EE62E00F9466F31092040201 +:10ECE000109205021092060210920702109208027A +:10ECF0001092090210920A0210920B0217C189E9C0 +:10ED000092EE62E00F9466F38FEE90EE60E00F9467 +:10ED100066F381E291EE60E00F942FF381EC91EEC7 +:10ED200060E00F9466F381E391EE60E00F942FF3BF +:10ED300084EE90EE60E00F9466F381E491EE60E083 +:10ED40000F942FF386E090E061E070E00F94A5F35C +:10ED50000F944DF381E691EE60E00F942FF383ED75 +:10ED600091EE60E00F9466F381E591EE60E00F9420 +:10ED70002FF38DEC91EE60E00F9466F381E791EE56 +:10ED800060E00F942FF38EE10F947EF388E90F94E7 +:10ED90007EF381E00F947EF30F944DF381E891EEC2 +:10EDA00060E00F942FF319E0E0E0F0E010935700DB +:10EDB000E4918E2F0F947EF30F944DF381E991EE41 +:10EDC00060E00F942FF3E3E0F0E010935700E4913C +:10EDD0008E2F0F947EF30F944DF381EA91EE60E055 +:10EDE0000F942FF3E2E0F0E010935700E4918E2FA0 +:10EDF0000F947EF30F944DF381EB91EE60E00F944E +:10EE00002FF3E1E0F0E0109357001491812F0F945D +:10EE10007EF30F944DF307CF85EA92EE62E00F94F4 +:10EE200066F385E592EE60E00F9466F30F944DF380 +:10EE300000E010E019C0C8016F2D0F94DDFFFF2026 +:10EE400031F483E592EE60E00F942FF30BC0F09263 +:10EE5000C6008091C00086FFFCCF8091C000806416 +:10EE60008093C0000F5F1F4FC80181519F41AA27A7 +:10EE700097FDA095BA2FABBFFC01F7905AE2F516AB +:10EE800021F062E000301607B1F60F944DF30F94B5 +:10EE90004DF381E692EE60E00F9466F30F944DF32C +:10EEA000CC24DD2400E010E01EC0C8010F94D5FF83 +:10EEB000F82E882331F483E592EE60E00F942FF36F +:10EEC0000BC08093C6008091C00086FFFCCF80916C +:10EED000C00080648093C000FE1419F00894C11C27 +:10EEE000D11C0F5F1F4FC80181519F41AA2797FD79 +:10EEF000A095BA2FABBFFC01E7907AE2E71621F0AC +:10EF000082E00030180789F60F944DF30F944DF30B +:10EF10008CE692EE60E00F942FF3C60161E070E0A2 +:10EF20000F94A5F30F944DF30F944DF3109200023C +:10EF300010920102109202021092030274CE83EB2F +:10EF400092EE62E00F9466F3279A2F9A16C02F98DC +:10EF500080E090E0E0EDF7E03197F1F7019684363C +:10EF60009105C1F72F9A80E090E0E0EDF7E031974E +:10EF7000F1F7019684369105C1F78091C00087FFB3 +:10EF8000E6CF8091C00087FFFCCF95C48FEB92EE57 +:10EF900062E00F9466F3409100025091010260918B +:10EFA00002027091030281E020E10F942CF4809121 +:10EFB000000290910102A0910202B09103028050E0 +:10EFC0009F4FAF4FBF4F8093000290930102A093D9 +:10EFD0000202B093030280509041A040B04008F478 +:10EFE00022CEA4CF8DEC92EE62E00F9466F34091B6 +:10EFF000040250910502609106027091070280E0C0 +:10F0000020E10F942CF48091040290910502A091CC +:10F010000602B091070280509F4FAF4FBF4F8093C1 +:10F02000040290930502A0930602B0930702FBCD61 +:10F030008AED92EE62E00F9466F385E892EE60E06E +:10F040000F9466F389E992EE60E00F9466F385EA27 +:10F0500092EE60E00F9466F383EB92EE60E00F9423 +:10F0600066F38FEB92EE60E00F9466F38DEC92EE18 +:10F0700060E00F9466F38AED92EE60E00F9466F321 +:10F0800081EE92EE60E00F9466F382EF92EE60E024 +:10F090000F9466F38CE093EE60E00F9466F387E1E3 +:10F0A00093EE60E00F9466F380E393EEB9CD81EECA +:10F0B00092EE62E00F9466F381E40F9416F482E41A +:10F0C0000F9416F483E40F9416F484E40F9416F46A +:10F0D00085E40F9416F486E40F9416F487E40F94F5 +:10F0E00016F488E40F9416F48AE40F9416F48BE473 +:10F0F0000F9416F48CE40F9416F495CD82EF92EEF3 +:10F1000062E00F9466F399249394AA24BB2445C427 +:10F110008CE093EE62E00F9466F340910802509108 +:10F12000090260910A0270910B0282E020E10F94C3 +:10F130002CF48091080290910902A0910A02B091EA +:10F140000B0280509F4FAF4FBF4F809308029093A8 +:10F150000902A0930A02B0930B0265CD87E193EEFA +:10F1600062E00F9466F384EE90EE60E00F9466F335 +:10F1700089ED91EE60E00F9466F309E715EECC5D42 +:10F18000DE4F19830883C452D1406624772443019B +:10F19000CA5DDE4F19821882C652D140A401930184 +:10F1A0005695479537952795C85DDE4F2883398357 +:10F1B0004A835B83C852D140CA5DDE4F4881598182 +:10F1C000C652D1404F5F5F4FCA5DDE4F59834883BF +:10F1D000C652D140CA0162E070E00F94A5F350E23C +:10F1E0005093C6008091C00086FFFCCF8091C00084 +:10F1F00080648093C0006DE26093C6008091C0007F +:10F2000086FFFCCF8091C00080648093C00070E2D4 +:10F210007093C6008091C00086FFFCCF8091C00033 +:10F2200080648093C000C85DDE4FE880F9800A8169 +:10F230001B81C852D140BB27A12F902F8F2D0F9437 +:10F240007EF3C85DDE4F8881C852D1400F947EF3B3 +:10F2500070E2F72EF092C6008091C00086FFFCCFCE +:10F260008091C00080648093C0000DE30093C600CD +:10F270008091C00086FFFCCF8091C00080648093A5 +:10F28000C00010E21093C6008091C00086FFFCCF42 +:10F290008091C00080648093C0008BBEF3012791F1 +:10F2A000C45DDE4F2883CC52D140A22EBB24CC2497 +:10F2B000DD240894611C711C811C911C8BBEF30120 +:10F2C0008791282E332444245524142D032DF22C09 +:10F2D000EE24EA0CFB1C0C1D1D1D0894611C711C06 +:10F2E000811C911C8BBEF3013791C35DDE4F3883C7 +:10F2F000CD52D1400894611C711C811C911C8BBEA5 +:10F30000F3014791C25DDE4F4883CE52D1402DEFCD +:10F310003FEF4FEF5FEF620E731E841E951E0F943A +:10F320007EF330E23093C6008091C00086FFFCCFB0 +:10F330008091C00080648093C000C45DDE4F8881EE +:10F34000CC52D1400F947EF340E24093C6008091AE +:10F35000C00086FFFCCF8091C00080648093C00015 +:10F36000C25DDE4F8881CE52D1400F947EF350E2D1 +:10F370005093C6008091C00086FFFCCF8091C000F2 +:10F3800080648093C000C35DDE4F8881CD52D14040 +:10F390000F947EF360E26093C6008091C00086FF08 +:10F3A000FCCF8091C00080648093C0007FEFE7169F +:10F3B0007FEFF70670E0070770E0170731F48EE083 +:10F3C00092EE60E00F942FF3DFC0D801C701807088 +:10F3D000907CA070B0708050904CA040B040D1F5AF +:10F3E0002FEF3FE340E050E0E222F3220423152315 +:10F3F000C85DDE4FA880B980CA80DB80C852D1408A +:10F40000AE0CBF1CC01ED11EAA0CBB1CCC1CDD1C2C +:10F4100088E192EE60E00F942FF3BB27A12F902F8D +:10F420008F2D0F947EF38E2D0F947EF330E2309368 +:10F43000C6008091C00086FFFCCF8091C000806430 +:10F440008093C0004EE34093C6008091C00086FFC9 +:10F45000FCCF87C06EE07EEF80E090E0E622F722EE +:10F46000082319237CE0E71674E9F70670E0070724 +:10F4700070E0170709F088C0C25DDE4F8881CE5268 +:10F48000D140E82EFF2400E010E0102F0F2DFE2CBD +:10F49000EE24C35DDE4F9881CD52D140E90EF11CC0 +:10F4A000011D111DD601C50181709070A070B07052 +:10F4B000DC0199278827E80EF91E0A1F1B1F20EF81 +:10F4C00030E040E050E0A222B322C422D522F1E194 +:10F4D000AA0CBB1CCC1CDD1CFA95D1F7EA0CFB1C5A +:10F4E0000C1D1D1D41E050E060E070E0242235223B +:10F4F00046225722E5E1220C331C441C551CEA9598 +:10F50000D1F7E20CF31C041D151D57016801AA0C6C +:10F51000BB1CCC1CDD1C8FE192EE60E00F942FF33E +:10F52000C801AA27BB270F947EF3BB27A12F902FDA +:10F530008F2D0F947EF38E2D0F947EF350E2509317 +:10F54000C6008091C00086FFFCCF8091C00080641F +:10F550008093C0006EE36093C6008091C00086FF78 +:10F56000FCCF8091C00080648093C000C601AA27B0 +:10F57000BB270F947EF3BB27AD2D9C2D8B2D0F94B5 +:10F580007EF38A2D0F947EF370E27093C600809113 +:10F59000C00086FFFCCF8091C00080648093C000D3 +:10F5A000CC5DDE4FE881F981C452D140CF01AA275A +:10F5B00097FDA095BA2FABBFFC018791969160E0B3 +:10F5C0000F942FF30F944DF3CC5DDE4F088119811A +:10F5D000C452D1400E5F1F4FCC5DDE4F19830883AC +:10F5E000C452D140CA5DDE4F28813981C652D14014 +:10F5F0002933310509F417CB44E050E060E070E0B6 +:10F60000640E751E861E971EC9CD80E393EE62E0E0 +:10F610000F9466F384E292EE60E00F942FF38091F2 +:10F62000C00087FFFCCF1091C6001F751093C60065 +:10F630008091C00086FFFCCF8091C00080648093E1 +:10F64000C0000F944DF3812F81548A3108F036C1E8 +:10F65000163409F495C0173490F4133409F44EC0ED +:10F66000143430F41134F1F0123409F01DC130C0FB +:10F67000143409F459C0153409F016C16BC01A349A +:10F6800009F4C4C01B3438F4173409F48FC018349B +:10F6900009F00AC1A1C01B3409F4D2C01C3409F01E +:10F6A00003C1E8C08FEF81B90DC082B1809582B9E6 +:10F6B00080E090E0E0EDF7E03197F1F70196883CCB +:10F6C0009105C1F78091C00087FFEFCF12B8EFC05E +:10F6D0008FEF84B90DC085B1809585B980E090E049 +:10F6E000E0EDF7E03197F1F70196883C9105C1F71D +:10F6F0008091C00087FFEFCF15B8D9C08FEF87B9D1 +:10F700000DC088B1809588B980E090E0E0EDF7E029 +:10F710003197F1F70196883C9105C1F78091C000BF +:10F7200087FFEFCF18B8C3C08FEF8AB90DC08BB178 +:10F7300080958BB980E090E0E0EDF7E03197F1F74C +:10F740000196883C9105C1F78091C00087FFEFCFFB +:10F750001BB8ADC08FEF8DB90DC08EB180958EB93D +:10F7600080E090E0E0EDF7E03197F1F70196883C1A +:10F770009105C1F78091C00087FFEFCF1EB897C0F9 +:10F780008FEF80BB0DC081B3809581BB80E090E09E +:10F79000E0EDF7E03197F1F70196883C9105C1F76C +:10F7A0008091C00087FFEFCF11BA81C08FEF83BB7C +:10F7B0000DC084B3809584BB80E090E0E0EDF7E07D +:10F7C0003197F1F70196883C9105C1F78091C0000F +:10F7D00087FFEFCF14BA6BC08FEF809301010FC08A +:10F7E0008091020180958093020180E090E0E0ED3D +:10F7F000F7E03197F1F70196883C9105C1F78091C8 +:10F80000C00087FFEDCF1092020151C08FEF8093AF +:10F8100004010FC08091050180958093050180E06F +:10F8200090E0E0EDF7E03197F1F70196883C910523 +:10F83000C1F78091C00087FFEDCF1092050137C05E +:10F840008FEF809307010FC080910801809580930E +:10F85000080180E090E0E0EDF7E03197F1F70196E4 +:10F86000883C9105C1F78091C00087FFEDCF1092D1 +:10F8700008011DC08FEF80930A010FC080910B011A +:10F88000809580930B0180E090E0E0EDF7E0319708 +:10F89000F1F70196883C9105C1F78091C00087FF80 +:10F8A000EDCF10920B0103C08FE292EEB9C98091A7 +:10F8B000C00087FFFCCF8091C600B5C982E492EEFC +:10F8C000AFC98CE191EEACC9AA24BB24933061F19D +:10F8D000943028F4913089F0923008F508C09530C2 +:10F8E000B1F1953040F1963009F053C04EC02B3144 +:10F8F00009F020C991E06BE11DC9213041F0C15DE3 +:10F90000DE4F5881CF52D140251709F002C362273C +:10F91000C15DDE4F2883CF52D14092E00BC9B22F98 +:10F92000A0E0622793E006C9822F90E0A82BB92BB4 +:10F93000622794E0FFC82E3009F0EBC2622795E001 +:10F94000C05DDE4F19821882C053D140F3C8E1E098 +:10F95000F0E0EC0FFD1FC05DDE4FE880F980C05382 +:10F96000D140EE0DFF1D208387010F5F1F4FC05D4B +:10F97000DE4F19830883C053D14062270A171B0743 +:10F9800009F0D8C8D80196E0D5C8261709F0C1C239 +:10F9900003C0973009F0CEC899248981833109F4D6 +:10F9A000FCC08431C8F4863009F4C2C0873050F4FA +:10F9B000823009F4F0C0833009F458C0813009F076 +:10F9C0000AC23EC0813109F462C0823108F0A6C08B +:10F9D000803109F000C2DFC0883109F472C089317A +:10F9E00050F4853109F4D9C0853108F477C18631E6 +:10F9F00009F0F1C173C18A3109F457C08A3108F4A2 +:10FA00007CC08B3109F446C08D3109F0E4C18D8191 +:10FA1000803311F090E00AC08F81882311F49EE1B9 +:10FA200005C0813011F091E001C098E91A821B8273 +:10FA30008D818C831D829E831F8227E030E0CFC1A1 +:10FA40001A8288E08B8381E48C8386E58D8382E54E +:10FA50008E8389E48F8383E5888780E589878FE5B6 +:10FA60008A8782E38B872BE030E0B9C18A818139B4 +:10FA700041F0823941F0803911F48FE005C080E017 +:10FA800003C082E001C08AE01A828B8344C09924BB +:10FA9000939481C08D81882311F48EE12CC0813034 +:10FAA00011F081E028C088E926C01A82E1E0F0E088 +:10FAB00089E08093570084918B831C8224E030E09E +:10FAC0008EC18B81803589F48C81883039F4E2E0F5 +:10FAD000F0E089E08093570084910DC0E0E0F0E011 +:10FAE00089E080935700849106C0E3E0F0E089E06C +:10FAF0008093570084911A82DFCF8D81836C99E0C7 +:10FB0000E1E0F0E0082E90935700E89507B600FC7E +:10FB1000FDCF1A821B8223E030E061C11A82CE5CE5 +:10FB2000DE4F188219821A821B82C253D14055C1FE +:10FB30008A8190E0A0E0B0E0582F442733272227A5 +:10FB40008B8190E0A0E0B0E0DC0199278827282B8A +:10FB5000392B4A2B5B2B8D8190E0A0E0B0E0282B65 +:10FB6000392B4A2B5B2B8C8190E0A0E0B0E0BA2FC0 +:10FB7000A92F982F8827282B392B4A2B5B2B220F54 +:10FB8000331F441F551FC05EDE4F288339834A83CD +:10FB90005B83C052D1401A8220C19A812B8183316C +:10FBA00049F0C05EDE4F488159816A817B81C05235 +:10FBB000D1408AC0CE5CDE4F488159816A817B8109 +:10FBC000C253D140403080EC580783E0680780E0A2 +:10FBD0007807F0F483E0FA0160935B0080935700AC +:10FBE000E89507B600FCFDCFCE5CDE4F4881598119 +:10FBF0006A817B81C253D14040505F4F6F4F7F4F2E +:10FC0000CE5CDE4F488359836A837B83C253D140E5 +:10FC1000C95CDE4F9883C753D140CA5CDE4F18825F +:10FC2000C653D140022F10E0CA5CDE4F6881798153 +:10FC3000C653D140062B172BC05EDE4F4881598139 +:10FC40006A817B81C052D140DE011B9631E08C91EC +:10FC500011962C9111971296C75CDE4F2883C953D9 +:10FC6000D140C85CDE4F1882C853D14090E0C85CD8 +:10FC7000DE4FE881F981C853D1408E2B9F2B0C01B8 +:10FC8000FA0160935B0030935700E89511244E5FB2 +:10FC90005F4F6F4F7F4F02501040C9F685E0C05E46 +:10FCA000DE4FE880F9800A811B81C052D140F70104 +:10FCB00000935B0080935700E89507B600FCFDCFEA +:10FCC00081E180935700E8951A82C05EDE4F488339 +:10FCD00059836A837B83C052D1407FC0FA80C55C60 +:10FCE000DE4FF882CB53D140C65CDE4F1882CA5338 +:10FCF000D1408B81C82EDD24C65CDE4F088119817E +:10FD0000CA53D140C02AD12A1A828981BE016D5FAF +:10FD10007F4F843121F59601C05EDE4FE880F98087 +:10FD20000A811B81C052D1400BBFF7018791969188 +:10FD3000DB018C9311969C936E5F7F4FD801C701B6 +:10FD40000296A11DB11DC05EDE4F88839983AA83F0 +:10FD5000BB83C052D14022503040F1F636C0C05E65 +:10FD6000DE4F288139814A815B81C052D14008949D +:10FD7000C108D108760100E010E00894C11CD11C34 +:10FD80000894E11CF11C011D111DE20EF31E041F5D +:10FD9000151F21BDBB27A52F942F832F82BD2F5F59 +:10FDA0003F4F4F4F5F4FF89A80B5DB018D93BD01F8 +:10FDB0002E153F054007510761F7C05EDE4F2883CF +:10FDC00039834A835B83C052D14096012D5F3F4FF8 +:10FDD000FB01108204C080EC8A8322E030E08BE1DA +:10FDE0008093C6008091C00086FFFCCF8091C00048 +:10FDF00080648093C000C15DDE4FF881CF52D14056 +:10FE0000F093C6008091C00086FFFCCF8091C000B7 +:10FE100080648093C000432F3093C6008091C0005F +:10FE200086FFFCCF8091C00080648093C000922F39 +:10FE30002093C6008091C00086FFFCCF8091C00057 +:10FE400080648093C0008EE08093C6008091C000E3 +:10FE500086FFFCCF8091C00080648093C00065E184 +:10FE6000C15DDE4FE880CF52D1406E2569276427FF +:10FE7000FE01319610C090819093C6008091C00021 +:10FE800086FFFCCF31968091C00080648093C000D3 +:10FE90006927215030402115310569F76093C6006C +:10FEA0008091C00086FFFCCF8091C0008064809369 +:10FEB000C00085B1805885B9992081F4C15DDE4FBD +:10FEC0000881CF52D1400F5FC15DDE4F0883CF5212 +:10FED000D14090E0A0E0B0E00D949AF527982F98DB +:10FEE00080E090E020ED37E0F9013197F1F70196DD +:10FEF00084369105C9F700008091C0008D7F809302 +:10FF0000C00081E180935700E895EE27FF27099410 +:10FF1000FFCF90E00D949AF597FB092E07260AD0A3 +:10FF200077FD04D02ED006D000201AF4709561958C +:10FF30007F4F0895F6F7909581959F4F0895A1E220 +:10FF40001A2EAA1BBB1BFD010DC0AA1FBB1FEE1F53 +:10FF5000FF1FA217B307E407F50720F0A21BB30B9E +:10FF6000E40BF50B661F771F881F991F1A9469F71A +:10FF700060957095809590959B01AC01BD01CF0176 +:10FF80000895AA1BBB1B51E107C0AA1FBB1FA617E0 +:10FF9000B70710F0A61BB70B881F991F5A95A9F732 +:10FFA00080959095BC01CD010895F999FECF92BD41 +:10FFB00081BDF89A992780B50895262FF999FECF2B +:10FFC0001FBA92BD81BD20BD0FB6F894FA9AF99A76 +:0AFFD0000FBE01960895F894FFCFCC +:040000033000E000E9 +:00000001FF diff --git a/test/ardmake/hardware/cores/arduino/HardwareSerial.cpp b/test/ardmake/hardware/cores/arduino/HardwareSerial.cpp new file mode 100644 index 0000000..4397efb --- /dev/null +++ b/test/ardmake/hardware/cores/arduino/HardwareSerial.cpp @@ -0,0 +1,303 @@ +/* + HardwareSerial.cpp - Hardware serial library for Wiring + Copyright (c) 2006 Nicholas Zambetti. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + + Modified 23 November 2006 by David A. Mellis + Modified 28 September 2010 by Mark Sproul +*/ + +#include +#include +#include +#include +#include "wiring.h" +#include "wiring_private.h" + +// this next line disables the entire HardwareSerial.cpp, +// this is so I can support Attiny series and any other chip without a uart +#if defined(UBRRH) || defined(UBRR0H) || defined(UBRR1H) || defined(UBRR2H) || defined(UBRR3H) + +#include "HardwareSerial.h" + +// Define constants and variables for buffering incoming serial data. We're +// using a ring buffer (I think), in which rx_buffer_head is the index of the +// location to which to write the next incoming character and rx_buffer_tail +// is the index of the location from which to read. +#if (RAMEND < 1000) + #define RX_BUFFER_SIZE 32 +#else + #define RX_BUFFER_SIZE 128 +#endif + +struct ring_buffer +{ + unsigned char buffer[RX_BUFFER_SIZE]; + int head; + int tail; +}; + +#if defined(UBRRH) || defined(UBRR0H) + ring_buffer rx_buffer = { { 0 }, 0, 0 }; +#endif +#if defined(UBRR1H) + ring_buffer rx_buffer1 = { { 0 }, 0, 0 }; +#endif +#if defined(UBRR2H) + ring_buffer rx_buffer2 = { { 0 }, 0, 0 }; +#endif +#if defined(UBRR3H) + ring_buffer rx_buffer3 = { { 0 }, 0, 0 }; +#endif + +inline void store_char(unsigned char c, ring_buffer *rx_buffer) +{ + int i = (unsigned int)(rx_buffer->head + 1) % RX_BUFFER_SIZE; + + // if we should be storing the received character into the location + // just before the tail (meaning that the head would advance to the + // current location of the tail), we're about to overflow the buffer + // and so we don't write the character or advance the head. + if (i != rx_buffer->tail) { + rx_buffer->buffer[rx_buffer->head] = c; + rx_buffer->head = i; + } +} + +#if defined(USART_RX_vect) + SIGNAL(USART_RX_vect) + { + #if defined(UDR0) + unsigned char c = UDR0; + #elif defined(UDR) + unsigned char c = UDR; // atmega8535 + #else + #error UDR not defined + #endif + store_char(c, &rx_buffer); + } +#elif defined(SIG_USART0_RECV) && defined(UDR0) + SIGNAL(SIG_USART0_RECV) + { + unsigned char c = UDR0; + store_char(c, &rx_buffer); + } +#elif defined(SIG_UART0_RECV) && defined(UDR0) + SIGNAL(SIG_UART0_RECV) + { + unsigned char c = UDR0; + store_char(c, &rx_buffer); + } +//#elif defined(SIG_USART_RECV) +#elif defined(USART0_RX_vect) + // fixed by Mark Sproul this is on the 644/644p + //SIGNAL(SIG_USART_RECV) + SIGNAL(USART0_RX_vect) + { + #if defined(UDR0) + unsigned char c = UDR0; + #elif defined(UDR) + unsigned char c = UDR; // atmega8, atmega32 + #else + #error UDR not defined + #endif + store_char(c, &rx_buffer); + } +#elif defined(SIG_UART_RECV) + // this is for atmega8 + SIGNAL(SIG_UART_RECV) + { + #if defined(UDR0) + unsigned char c = UDR0; // atmega645 + #elif defined(UDR) + unsigned char c = UDR; // atmega8 + #endif + store_char(c, &rx_buffer); + } +#elif defined(USBCON) + #warning No interrupt handler for usart 0 + #warning Serial(0) is on USB interface +#else + #error No interrupt handler for usart 0 +#endif + +//#if defined(SIG_USART1_RECV) +#if defined(USART1_RX_vect) + //SIGNAL(SIG_USART1_RECV) + SIGNAL(USART1_RX_vect) + { + unsigned char c = UDR1; + store_char(c, &rx_buffer1); + } +#elif defined(SIG_USART1_RECV) + #error SIG_USART1_RECV +#endif + +#if defined(USART2_RX_vect) && defined(UDR2) + SIGNAL(USART2_RX_vect) + { + unsigned char c = UDR2; + store_char(c, &rx_buffer2); + } +#elif defined(SIG_USART2_RECV) + #error SIG_USART2_RECV +#endif + +#if defined(USART3_RX_vect) && defined(UDR3) + SIGNAL(USART3_RX_vect) + { + unsigned char c = UDR3; + store_char(c, &rx_buffer3); + } +#elif defined(SIG_USART3_RECV) + #error SIG_USART3_RECV +#endif + + + +// Constructors //////////////////////////////////////////////////////////////// + +HardwareSerial::HardwareSerial(ring_buffer *rx_buffer, + volatile uint8_t *ubrrh, volatile uint8_t *ubrrl, + volatile uint8_t *ucsra, volatile uint8_t *ucsrb, + volatile uint8_t *udr, + uint8_t rxen, uint8_t txen, uint8_t rxcie, uint8_t udre, uint8_t u2x) +{ + _rx_buffer = rx_buffer; + _ubrrh = ubrrh; + _ubrrl = ubrrl; + _ucsra = ucsra; + _ucsrb = ucsrb; + _udr = udr; + _rxen = rxen; + _txen = txen; + _rxcie = rxcie; + _udre = udre; + _u2x = u2x; +} + +// Public Methods ////////////////////////////////////////////////////////////// + +void HardwareSerial::begin(long baud) +{ + uint16_t baud_setting; + bool use_u2x = true; + +#if F_CPU == 16000000UL + // hardcoded exception for compatibility with the bootloader shipped + // with the Duemilanove and previous boards and the firmware on the 8U2 + // on the Uno and Mega 2560. + if (baud == 57600) { + use_u2x = false; + } +#endif + + if (use_u2x) { + *_ucsra = 1 << _u2x; + baud_setting = (F_CPU / 4 / baud - 1) / 2; + } else { + *_ucsra = 0; + baud_setting = (F_CPU / 8 / baud - 1) / 2; + } + + // assign the baud_setting, a.k.a. ubbr (USART Baud Rate Register) + *_ubrrh = baud_setting >> 8; + *_ubrrl = baud_setting; + + sbi(*_ucsrb, _rxen); + sbi(*_ucsrb, _txen); + sbi(*_ucsrb, _rxcie); +} + +void HardwareSerial::end() +{ + cbi(*_ucsrb, _rxen); + cbi(*_ucsrb, _txen); + cbi(*_ucsrb, _rxcie); +} + +int HardwareSerial::available(void) +{ + return (unsigned int)(RX_BUFFER_SIZE + _rx_buffer->head - _rx_buffer->tail) % RX_BUFFER_SIZE; +} + +int HardwareSerial::peek(void) +{ + if (_rx_buffer->head == _rx_buffer->tail) { + return -1; + } else { + return _rx_buffer->buffer[_rx_buffer->tail]; + } +} + +int HardwareSerial::read(void) +{ + // if the head isn't ahead of the tail, we don't have any characters + if (_rx_buffer->head == _rx_buffer->tail) { + return -1; + } else { + unsigned char c = _rx_buffer->buffer[_rx_buffer->tail]; + _rx_buffer->tail = (unsigned int)(_rx_buffer->tail + 1) % RX_BUFFER_SIZE; + return c; + } +} + +void HardwareSerial::flush() +{ + // don't reverse this or there may be problems if the RX interrupt + // occurs after reading the value of rx_buffer_head but before writing + // the value to rx_buffer_tail; the previous value of rx_buffer_head + // may be written to rx_buffer_tail, making it appear as if the buffer + // don't reverse this or there may be problems if the RX interrupt + // occurs after reading the value of rx_buffer_head but before writing + // the value to rx_buffer_tail; the previous value of rx_buffer_head + // may be written to rx_buffer_tail, making it appear as if the buffer + // were full, not empty. + _rx_buffer->head = _rx_buffer->tail; +} + +void HardwareSerial::write(uint8_t c) +{ + while (!((*_ucsra) & (1 << _udre))) + ; + + *_udr = c; +} + +// Preinstantiate Objects ////////////////////////////////////////////////////// + +#if defined(UBRRH) && defined(UBRRL) + HardwareSerial Serial(&rx_buffer, &UBRRH, &UBRRL, &UCSRA, &UCSRB, &UDR, RXEN, TXEN, RXCIE, UDRE, U2X); +#elif defined(UBRR0H) && defined(UBRR0L) + HardwareSerial Serial(&rx_buffer, &UBRR0H, &UBRR0L, &UCSR0A, &UCSR0B, &UDR0, RXEN0, TXEN0, RXCIE0, UDRE0, U2X0); +#elif defined(USBCON) + #warning no serial port defined (port 0) +#else + #error no serial port defined (port 0) +#endif + +#if defined(UBRR1H) + HardwareSerial Serial1(&rx_buffer1, &UBRR1H, &UBRR1L, &UCSR1A, &UCSR1B, &UDR1, RXEN1, TXEN1, RXCIE1, UDRE1, U2X1); +#endif +#if defined(UBRR2H) + HardwareSerial Serial2(&rx_buffer2, &UBRR2H, &UBRR2L, &UCSR2A, &UCSR2B, &UDR2, RXEN2, TXEN2, RXCIE2, UDRE2, U2X2); +#endif +#if defined(UBRR3H) + HardwareSerial Serial3(&rx_buffer3, &UBRR3H, &UBRR3L, &UCSR3A, &UCSR3B, &UDR3, RXEN3, TXEN3, RXCIE3, UDRE3, U2X3); +#endif + +#endif // whole file + diff --git a/test/ardmake/hardware/cores/arduino/HardwareSerial.d b/test/ardmake/hardware/cores/arduino/HardwareSerial.d new file mode 100644 index 0000000..92f1cc9 --- /dev/null +++ b/test/ardmake/hardware/cores/arduino/HardwareSerial.d @@ -0,0 +1,28 @@ +ardmake/hardware/cores/arduino/HardwareSerial.o ardmake/hardware/cores/arduino/HardwareSerial.d: ardmake/hardware/cores/arduino/HardwareSerial.cpp \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/stdlib.h \ + /usr/lib/gcc/avr/4.3.5/include/stddef.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/stdio.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/inttypes.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/stdint.h \ + /usr/lib/gcc/avr/4.3.5/include/stdarg.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/string.h \ + ardmake/hardware/cores/arduino/wiring.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/io.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/sfr_defs.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/iom328p.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/portpins.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/common.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/version.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/fuse.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/lock.h \ + ardmake/hardware/cores/arduino/binary.h \ + ardmake/hardware/cores/arduino/wiring_private.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/interrupt.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/delay.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/util/delay.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/util/delay_basic.h \ + ardmake/hardware/cores/arduino/HardwareSerial.h \ + ardmake/hardware/cores/arduino/Stream.h \ + ardmake/hardware/cores/arduino/Print.h \ + ardmake/hardware/cores/arduino/WString.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/ctype.h diff --git a/test/ardmake/hardware/cores/arduino/HardwareSerial.h b/test/ardmake/hardware/cores/arduino/HardwareSerial.h new file mode 100644 index 0000000..3efa775 --- /dev/null +++ b/test/ardmake/hardware/cores/arduino/HardwareSerial.h @@ -0,0 +1,76 @@ +/* + HardwareSerial.h - Hardware serial library for Wiring + Copyright (c) 2006 Nicholas Zambetti. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + + Modified 28 September 2010 by Mark Sproul +*/ + +#ifndef HardwareSerial_h +#define HardwareSerial_h + +#include + +#include "Stream.h" + +struct ring_buffer; + +class HardwareSerial : public Stream +{ + private: + ring_buffer *_rx_buffer; + volatile uint8_t *_ubrrh; + volatile uint8_t *_ubrrl; + volatile uint8_t *_ucsra; + volatile uint8_t *_ucsrb; + volatile uint8_t *_udr; + uint8_t _rxen; + uint8_t _txen; + uint8_t _rxcie; + uint8_t _udre; + uint8_t _u2x; + public: + HardwareSerial(ring_buffer *rx_buffer, + volatile uint8_t *ubrrh, volatile uint8_t *ubrrl, + volatile uint8_t *ucsra, volatile uint8_t *ucsrb, + volatile uint8_t *udr, + uint8_t rxen, uint8_t txen, uint8_t rxcie, uint8_t udre, uint8_t u2x); + void begin(long); + void end(); + virtual int available(void); + virtual int peek(void); + virtual int read(void); + virtual void flush(void); + virtual void write(uint8_t); + using Print::write; // pull in write(str) and write(buf, size) from Print +}; + +#if defined(UBRRH) || defined(UBRR0H) + extern HardwareSerial Serial; +#elif defined(USBCON) + #include "usb_api.h" +#endif +#if defined(UBRR1H) + extern HardwareSerial Serial1; +#endif +#if defined(UBRR2H) + extern HardwareSerial Serial2; +#endif +#if defined(UBRR3H) + extern HardwareSerial Serial3; +#endif + +#endif diff --git a/test/ardmake/hardware/cores/arduino/Makefile b/test/ardmake/hardware/cores/arduino/Makefile new file mode 100644 index 0000000..b606b39 --- /dev/null +++ b/test/ardmake/hardware/cores/arduino/Makefile @@ -0,0 +1,250 @@ +# Arduino Makefile +# Arduino adaptation by mellis, eighthave, oli.keller +# +# This makefile allows you to build sketches from the command line +# without the Arduino environment (or Java). +# +# Note, this Makefile has been edited by the Debian package maintainer, so +# there's a reasonable chance it'll simply work without the need to edit it +# but just in case, here are the instructions: +# +# Detailed instructions for using the makefile: +# +# 1. Copy this file into the folder with your sketch. There should be a +# file with the same name as the folder and with the extension .pde +# (e.g. foo.pde in the foo/ folder). +# +# 2. Modify the line containg "INSTALL_DIR" to point to the directory that +# contains the Arduino installation (for example, under Mac OS X, this +# might be /Applications/arduino-0012). +# +# 3. Modify the line containing "PORT" to refer to the filename +# representing the USB or serial connection to your Arduino board +# (e.g. PORT = /dev/tty.USB0). If the exact name of this file +# changes, you can use * as a wildcard (e.g. PORT = /dev/tty.usb*). +# +# 4. Set the line containing "MCU" to match your board's processor. +# Older one's are atmega8 based, newer ones like Arduino Mini, Bluetooth +# or Diecimila have the atmega168. If you're using a LilyPad Arduino, +# change F_CPU to 8000000. +# +# 5. At the command line, change to the directory containing your +# program's file and the makefile. +# +# 6. Type "make" and press enter to compile/verify your program. +# +# 7. Type "make upload", reset your Arduino board, and press enter to +# upload your program to the Arduino board. +# +# $Id$ + +TARGET = $(notdir $(CURDIR)) +#INSTALL_DIR = ../../.. +PORT = /dev/ttyUSB* +UPLOAD_RATE = 57600 +AVRDUDE_PROGRAMMER = stk500v1 +MCU = atmega168 +F_CPU = 16000000 + +############################################################################ +# Below here nothing should be changed... + +ARDUINO = /usr/share/arduino/hardware/arduino/cores/arduino +AVR_TOOLS_PATH = /usr/bin +SRC = $(ARDUINO)/pins_arduino.c $(ARDUINO)/wiring.c \ +$(ARDUINO)/wiring_analog.c $(ARDUINO)/wiring_digital.c \ +$(ARDUINO)/wiring_pulse.c $(ARDUINO)/wiring_shift.c \ +$(ARDUINO)/WInterrupts.c +CXXSRC = $(ARDUINO)/HardwareSerial.cpp $(ARDUINO)/WMath.cpp \ +$(ARDUINO)/Print.cpp +FORMAT = ihex + + +# Name of this Makefile (used for "make depend"). +MAKEFILE = Makefile + +# Debugging format. +# Native formats for AVR-GCC's -g are stabs [default], or dwarf-2. +# AVR (extended) COFF requires stabs, plus an avr-objcopy run. +DEBUG = stabs + +OPT = s + +# Place -D or -U options here +CDEFS = -DF_CPU=$(F_CPU) +CXXDEFS = -DF_CPU=$(F_CPU) + +# Place -I options here +CINCS = -I$(ARDUINO) +CXXINCS = -I$(ARDUINO) + +# Compiler flag to set the C Standard level. +# c89 - "ANSI" C +# gnu89 - c89 plus GCC extensions +# c99 - ISO C99 standard (not yet fully implemented) +# gnu99 - c99 plus GCC extensions +CSTANDARD = -std=gnu99 +CDEBUG = -g$(DEBUG) +CWARN = -Wall -Wstrict-prototypes +CTUNING = -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums +#CEXTRA = -Wa,-adhlns=$(<:.c=.lst) + +CFLAGS = $(CDEBUG) $(CDEFS) $(CINCS) -O$(OPT) $(CWARN) $(CSTANDARD) $(CEXTRA) +CXXFLAGS = $(CDEFS) $(CINCS) -O$(OPT) +#ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs +LDFLAGS = -lm + + +# Programming support using avrdude. Settings and variables. +AVRDUDE_PORT = $(PORT) +AVRDUDE_WRITE_FLASH = -U flash:w:applet/$(TARGET).hex +AVRDUDE_FLAGS = -V -F \ +-p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) \ +-b $(UPLOAD_RATE) + +# Program settings +CC = $(AVR_TOOLS_PATH)/avr-gcc +CXX = $(AVR_TOOLS_PATH)/avr-g++ +OBJCOPY = $(AVR_TOOLS_PATH)/avr-objcopy +OBJDUMP = $(AVR_TOOLS_PATH)/avr-objdump +AR = $(AVR_TOOLS_PATH)/avr-ar +SIZE = $(AVR_TOOLS_PATH)/avr-size +NM = $(AVR_TOOLS_PATH)/avr-nm +AVRDUDE = $(AVR_TOOLS_PATH)/avrdude +REMOVE = rm -f +MV = mv -f + +# Define all object files. +OBJ = $(SRC:%.c=build/%.o) $(CXXSRC:%.cpp=build/%.o) $(ASRC:%.S=build/%.o) + +# Define all listing files. +LST = $(ASRC:%.S=build/%.lst) $(CXXSRC:%.cpp=build/%.lst) $(SRC:%.c=build/%.lst) + +# Combine all necessary flags and optional flags. +# Add target processor to flags. +ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) +ALL_CXXFLAGS = -mmcu=$(MCU) -I. $(CXXFLAGS) +ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) + + +# Default target. +all: applet_files build sizeafter + +build: elf hex + +applet_files: $(TARGET).pde + # Here is the "preprocessing". + # It creates a .cpp file based with the same name as the .pde file. + # On top of the new .cpp file comes the WProgram.h header. + # At the end there is a generic main() function attached. + # Then the .cpp file will be compiled. Errors during compile will + # refer to this new, automatically generated, file. + # Not the original .pde file you actually edit... + test -d applet || mkdir applet + echo '#include "WProgram.h"' > applet/$(TARGET).cpp + cat $(TARGET).pde >> applet/$(TARGET).cpp + cat $(ARDUINO)/main.cxx >> applet/$(TARGET).cpp + +elf: applet/$(TARGET).elf +hex: applet/$(TARGET).hex +eep: applet/$(TARGET).eep +lss: applet/$(TARGET).lss +sym: applet/$(TARGET).sym + +# Program the device. +upload: applet/$(TARGET).hex + stty -F $(AVRDUDE_PORT) hupcl ; sleep 0.1 ; stty -F $(AVRDUDE_PORT) -hupcl + $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) + + + # Display size of file. +HEXSIZE = $(SIZE) --target=$(FORMAT) applet/$(TARGET).hex +ELFSIZE = $(SIZE) applet/$(TARGET).elf +sizebefore: + @if [ -f applet/$(TARGET).elf ]; then echo; echo $(MSG_SIZE_BEFORE); $(HEXSIZE); echo; fi + +sizeafter: + @if [ -f applet/$(TARGET).elf ]; then echo; echo $(MSG_SIZE_AFTER); $(HEXSIZE); echo; fi + + +# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB. +COFFCONVERT=$(OBJCOPY) --debugging \ +--change-section-address .data-0x800000 \ +--change-section-address .bss-0x800000 \ +--change-section-address .noinit-0x800000 \ +--change-section-address .eeprom-0x810000 + + +coff: applet/$(TARGET).elf + $(COFFCONVERT) -O coff-avr applet/$(TARGET).elf $(TARGET).cof + + +extcoff: $(TARGET).elf + $(COFFCONVERT) -O coff-ext-avr applet/$(TARGET).elf $(TARGET).cof + + +.SUFFIXES: .elf .hex .eep .lss .sym + +.elf.hex: + $(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@ + +.elf.eep: + -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \ + --change-section-lma .eeprom=0 -O $(FORMAT) $< $@ + +# Create extended listing file from ELF output file. +.elf.lss: + $(OBJDUMP) -h -S $< > $@ + +# Create a symbol table from ELF output file. +.elf.sym: + $(NM) -n $< > $@ + + # Link: create ELF output file from library. +applet/$(TARGET).elf: $(TARGET).pde applet/core.a + $(CXX) $(ALL_CXXFLAGS) -o $@ applet/$(TARGET).cpp -L. applet/core.a $(LDFLAGS) + +applet/core.a: $(OBJ) + @for i in $(OBJ); do echo $(AR) rcs applet/core.a $$i; $(AR) rcs applet/core.a $$i; done + + + +# Compile: create object files from C++ source files. +build/%.o: %.cpp + mkdir -p $(dir $@) + $(CXX) -c $(ALL_CXXFLAGS) $< -o $@ + +# Compile: create object files from C source files. +build/%.o: %.c + mkdir -p $(dir $@) + $(CC) -c $(ALL_CFLAGS) $< -o $@ + + +# Compile: create assembler files from C source files. +build/%.s: %.c + $(CC) -S $(ALL_CFLAGS) $< -o $@ + + +# Assemble: create object files from assembler source files. +.S.o: + $(CC) -c $(ALL_ASFLAGS) $< -o $@ + + +# Automatic dependencies +build/%.d: %.c + $(CC) -M $(ALL_CFLAGS) $< | sed "s;$(notdir $*).o:;$*.o $*.d:;" > $@ + +build/%.d: %.cpp + $(CXX) -M $(ALL_CXXFLAGS) $< | sed "s;$(notdir $*).o:;$*.o $*.d:;" > $@ + + +# Target: clean project. +clean: + $(REMOVE) applet/$(TARGET).hex applet/$(TARGET).eep applet/$(TARGET).cof applet/$(TARGET).elf \ + applet/$(TARGET).map applet/$(TARGET).sym applet/$(TARGET).lss applet/core.a \ + $(OBJ) $(LST) $(SRC:%.c=build/%.s) $(SRC:%.c=build/%.d) $(CXXSRC:%.cpp=build/%.s) $(CXXSRC:%.cpp=build/%.d) + +.PHONY: all build elf hex eep lss sym program coff extcoff clean applet_files sizebefore sizeafter + +-include $(SRC:%.c=build/%.d) +-include $(CXXSRC:%.cpp=build/%.d) diff --git a/test/ardmake/hardware/cores/arduino/Print.cpp b/test/ardmake/hardware/cores/arduino/Print.cpp new file mode 100644 index 0000000..4ee556d --- /dev/null +++ b/test/ardmake/hardware/cores/arduino/Print.cpp @@ -0,0 +1,220 @@ +/* + Print.cpp - Base class that provides print() and println() + Copyright (c) 2008 David A. Mellis. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + + Modified 23 November 2006 by David A. Mellis + */ + +#include +#include +#include +#include +#include "wiring.h" + +#include "Print.h" + +// Public Methods ////////////////////////////////////////////////////////////// + +/* default implementation: may be overridden */ +void Print::write(const char *str) +{ + while (*str) + write(*str++); +} + +/* default implementation: may be overridden */ +void Print::write(const uint8_t *buffer, size_t size) +{ + while (size--) + write(*buffer++); +} + +void Print::print(const String &s) +{ + for (int i = 0; i < s.length(); i++) { + write(s[i]); + } +} + +void Print::print(const char str[]) +{ + write(str); +} + +void Print::print(char c, int base) +{ + print((long) c, base); +} + +void Print::print(unsigned char b, int base) +{ + print((unsigned long) b, base); +} + +void Print::print(int n, int base) +{ + print((long) n, base); +} + +void Print::print(unsigned int n, int base) +{ + print((unsigned long) n, base); +} + +void Print::print(long n, int base) +{ + if (base == 0) { + write(n); + } else if (base == 10) { + if (n < 0) { + print('-'); + n = -n; + } + printNumber(n, 10); + } else { + printNumber(n, base); + } +} + +void Print::print(unsigned long n, int base) +{ + if (base == 0) write(n); + else printNumber(n, base); +} + +void Print::print(double n, int digits) +{ + printFloat(n, digits); +} + +void Print::println(void) +{ + print('\r'); + print('\n'); +} + +void Print::println(const String &s) +{ + print(s); + println(); +} + +void Print::println(const char c[]) +{ + print(c); + println(); +} + +void Print::println(char c, int base) +{ + print(c, base); + println(); +} + +void Print::println(unsigned char b, int base) +{ + print(b, base); + println(); +} + +void Print::println(int n, int base) +{ + print(n, base); + println(); +} + +void Print::println(unsigned int n, int base) +{ + print(n, base); + println(); +} + +void Print::println(long n, int base) +{ + print(n, base); + println(); +} + +void Print::println(unsigned long n, int base) +{ + print(n, base); + println(); +} + +void Print::println(double n, int digits) +{ + print(n, digits); + println(); +} + +// Private Methods ///////////////////////////////////////////////////////////// + +void Print::printNumber(unsigned long n, uint8_t base) +{ + unsigned char buf[8 * sizeof(long)]; // Assumes 8-bit chars. + unsigned long i = 0; + + if (n == 0) { + print('0'); + return; + } + + while (n > 0) { + buf[i++] = n % base; + n /= base; + } + + for (; i > 0; i--) + print((char) (buf[i - 1] < 10 ? + '0' + buf[i - 1] : + 'A' + buf[i - 1] - 10)); +} + +void Print::printFloat(double number, uint8_t digits) +{ + // Handle negative numbers + if (number < 0.0) + { + print('-'); + number = -number; + } + + // Round correctly so that print(1.999, 2) prints as "2.00" + double rounding = 0.5; + for (uint8_t i=0; i 0) + print("."); + + // Extract digits from the remainder one at a time + while (digits-- > 0) + { + remainder *= 10.0; + int toPrint = int(remainder); + print(toPrint); + remainder -= toPrint; + } +} diff --git a/test/ardmake/hardware/cores/arduino/Print.d b/test/ardmake/hardware/cores/arduino/Print.d new file mode 100644 index 0000000..bf5b85f --- /dev/null +++ b/test/ardmake/hardware/cores/arduino/Print.d @@ -0,0 +1,22 @@ +ardmake/hardware/cores/arduino/Print.o ardmake/hardware/cores/arduino/Print.d: ardmake/hardware/cores/arduino/Print.cpp \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/stdlib.h \ + /usr/lib/gcc/avr/4.3.5/include/stddef.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/stdio.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/inttypes.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/stdint.h \ + /usr/lib/gcc/avr/4.3.5/include/stdarg.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/string.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/math.h \ + ardmake/hardware/cores/arduino/wiring.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/io.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/sfr_defs.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/iom328p.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/portpins.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/common.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/version.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/fuse.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/lock.h \ + ardmake/hardware/cores/arduino/binary.h \ + ardmake/hardware/cores/arduino/Print.h \ + ardmake/hardware/cores/arduino/WString.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/ctype.h diff --git a/test/ardmake/hardware/cores/arduino/Print.h b/test/ardmake/hardware/cores/arduino/Print.h new file mode 100644 index 0000000..b092ae5 --- /dev/null +++ b/test/ardmake/hardware/cores/arduino/Print.h @@ -0,0 +1,66 @@ +/* + Print.h - Base class that provides print() and println() + Copyright (c) 2008 David A. Mellis. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#ifndef Print_h +#define Print_h + +#include +#include // for size_t + +#include "WString.h" + +#define DEC 10 +#define HEX 16 +#define OCT 8 +#define BIN 2 +#define BYTE 0 + +class Print +{ + private: + void printNumber(unsigned long, uint8_t); + void printFloat(double, uint8_t); + public: + virtual void write(uint8_t) = 0; + virtual void write(const char *str); + virtual void write(const uint8_t *buffer, size_t size); + + void print(const String &); + void print(const char[]); + void print(char, int = BYTE); + void print(unsigned char, int = BYTE); + void print(int, int = DEC); + void print(unsigned int, int = DEC); + void print(long, int = DEC); + void print(unsigned long, int = DEC); + void print(double, int = 2); + + void println(const String &s); + void println(const char[]); + void println(char, int = BYTE); + void println(unsigned char, int = BYTE); + void println(int, int = DEC); + void println(unsigned int, int = DEC); + void println(long, int = DEC); + void println(unsigned long, int = DEC); + void println(double, int = 2); + void println(void); +}; + +#endif diff --git a/test/ardmake/hardware/cores/arduino/README.Makefile b/test/ardmake/hardware/cores/arduino/README.Makefile new file mode 100644 index 0000000..01f3c4a --- /dev/null +++ b/test/ardmake/hardware/cores/arduino/README.Makefile @@ -0,0 +1,11 @@ +The Makefile here is based on the one that was in Arduino 0017 +but has since been dropped by the upstream developers. + +It is preserved in the Debian package to allow command-line usage without +introducing java dependancies, so if you want to report bugs against +it, please report them against whichever distribution you are using, +and NOT against the upstream source, as that would be pointless, and +will irritate the developers who dropped the file in order to eliminate +bug reports against the Makefile. + +The same goes for the main.cxx file. diff --git a/test/ardmake/hardware/cores/arduino/Stream.h b/test/ardmake/hardware/cores/arduino/Stream.h new file mode 100644 index 0000000..93d8275 --- /dev/null +++ b/test/ardmake/hardware/cores/arduino/Stream.h @@ -0,0 +1,35 @@ +/* + Stream.h - base class for character-based streams. + Copyright (c) 2010 David A. Mellis. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#ifndef Stream_h +#define Stream_h + +#include +#include "Print.h" + +class Stream : public Print +{ + public: + virtual int available() = 0; + virtual int read() = 0; + virtual int peek() = 0; + virtual void flush() = 0; +}; + +#endif diff --git a/test/ardmake/hardware/cores/arduino/Tone.cpp b/test/ardmake/hardware/cores/arduino/Tone.cpp new file mode 100644 index 0000000..c3910e7 --- /dev/null +++ b/test/ardmake/hardware/cores/arduino/Tone.cpp @@ -0,0 +1,601 @@ +/* Tone.cpp + + A Tone Generator Library + + Written by Brett Hagman + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + +Version Modified By Date Comments +------- ----------- -------- -------- +0001 B Hagman 09/08/02 Initial coding +0002 B Hagman 09/08/18 Multiple pins +0003 B Hagman 09/08/18 Moved initialization from constructor to begin() +0004 B Hagman 09/09/26 Fixed problems with ATmega8 +0005 B Hagman 09/11/23 Scanned prescalars for best fit on 8 bit timers + 09/11/25 Changed pin toggle method to XOR + 09/11/25 Fixed timer0 from being excluded +0006 D Mellis 09/12/29 Replaced objects with functions +0007 M Sproul 10/08/29 Changed #ifdefs from cpu to register +*************************************************/ + +#include +#include +#include "wiring.h" +#include "pins_arduino.h" + +#if defined(__AVR_ATmega8__) || defined(__AVR_ATmega128__) +#define TCCR2A TCCR2 +#define TCCR2B TCCR2 +#define COM2A1 COM21 +#define COM2A0 COM20 +#define OCR2A OCR2 +#define TIMSK2 TIMSK +#define OCIE2A OCIE2 +#define TIMER2_COMPA_vect TIMER2_COMP_vect +#define TIMSK1 TIMSK +#endif + +// timerx_toggle_count: +// > 0 - duration specified +// = 0 - stopped +// < 0 - infinitely (until stop() method called, or new play() called) + +#if !defined(__AVR_ATmega8__) +volatile long timer0_toggle_count; +volatile uint8_t *timer0_pin_port; +volatile uint8_t timer0_pin_mask; +#endif + +volatile long timer1_toggle_count; +volatile uint8_t *timer1_pin_port; +volatile uint8_t timer1_pin_mask; +volatile long timer2_toggle_count; +volatile uint8_t *timer2_pin_port; +volatile uint8_t timer2_pin_mask; + +#if defined(TIMSK3) +volatile long timer3_toggle_count; +volatile uint8_t *timer3_pin_port; +volatile uint8_t timer3_pin_mask; +#endif + +#if defined(TIMSK4) +volatile long timer4_toggle_count; +volatile uint8_t *timer4_pin_port; +volatile uint8_t timer4_pin_mask; +#endif + +#if defined(TIMSK5) +volatile long timer5_toggle_count; +volatile uint8_t *timer5_pin_port; +volatile uint8_t timer5_pin_mask; +#endif + + +// MLS: This does not make sense, the 3 options are the same +#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) + +#define AVAILABLE_TONE_PINS 1 + +const uint8_t PROGMEM tone_pin_to_timer_PGM[] = { 2 /*, 3, 4, 5, 1, 0 */ }; +static uint8_t tone_pins[AVAILABLE_TONE_PINS] = { 255 /*, 255, 255, 255, 255, 255 */ }; + +#elif defined(__AVR_ATmega8__) + +#define AVAILABLE_TONE_PINS 1 + +const uint8_t PROGMEM tone_pin_to_timer_PGM[] = { 2 /*, 1 */ }; +static uint8_t tone_pins[AVAILABLE_TONE_PINS] = { 255 /*, 255 */ }; + +#else + +#define AVAILABLE_TONE_PINS 1 + +// Leave timer 0 to last. +const uint8_t PROGMEM tone_pin_to_timer_PGM[] = { 2 /*, 1, 0 */ }; +static uint8_t tone_pins[AVAILABLE_TONE_PINS] = { 255 /*, 255, 255 */ }; + +#endif + + + +static int8_t toneBegin(uint8_t _pin) +{ + int8_t _timer = -1; + + // if we're already using the pin, the timer should be configured. + for (int i = 0; i < AVAILABLE_TONE_PINS; i++) { + if (tone_pins[i] == _pin) { + return pgm_read_byte(tone_pin_to_timer_PGM + i); + } + } + + // search for an unused timer. + for (int i = 0; i < AVAILABLE_TONE_PINS; i++) { + if (tone_pins[i] == 255) { + tone_pins[i] = _pin; + _timer = pgm_read_byte(tone_pin_to_timer_PGM + i); + break; + } + } + + if (_timer != -1) + { + // Set timer specific stuff + // All timers in CTC mode + // 8 bit timers will require changing prescalar values, + // whereas 16 bit timers are set to either ck/1 or ck/64 prescalar + switch (_timer) + { + #if defined(TCCR0A) && defined(TCCR0B) + case 0: + // 8 bit timer + TCCR0A = 0; + TCCR0B = 0; + bitWrite(TCCR0A, WGM01, 1); + bitWrite(TCCR0B, CS00, 1); + timer0_pin_port = portOutputRegister(digitalPinToPort(_pin)); + timer0_pin_mask = digitalPinToBitMask(_pin); + break; + #endif + + #if defined(TCCR1A) && defined(TCCR1B) && defined(WGM12) + case 1: + // 16 bit timer + TCCR1A = 0; + TCCR1B = 0; + bitWrite(TCCR1B, WGM12, 1); + bitWrite(TCCR1B, CS10, 1); + timer1_pin_port = portOutputRegister(digitalPinToPort(_pin)); + timer1_pin_mask = digitalPinToBitMask(_pin); + break; + #endif + + #if defined(TCCR2A) && defined(TCCR2B) + case 2: + // 8 bit timer + TCCR2A = 0; + TCCR2B = 0; + bitWrite(TCCR2A, WGM21, 1); + bitWrite(TCCR2B, CS20, 1); + timer2_pin_port = portOutputRegister(digitalPinToPort(_pin)); + timer2_pin_mask = digitalPinToBitMask(_pin); + break; + #endif + + #if defined(TCCR3A) && defined(TCCR3B) && defined(TIMSK3) + case 3: + // 16 bit timer + TCCR3A = 0; + TCCR3B = 0; + bitWrite(TCCR3B, WGM32, 1); + bitWrite(TCCR3B, CS30, 1); + timer3_pin_port = portOutputRegister(digitalPinToPort(_pin)); + timer3_pin_mask = digitalPinToBitMask(_pin); + break; + #endif + + #if defined(TCCR4A) && defined(TCCR4B) && defined(TIMSK4) + case 4: + // 16 bit timer + TCCR4A = 0; + TCCR4B = 0; + #if defined(WGM42) + bitWrite(TCCR4B, WGM42, 1); + #elif defined(CS43) + #warning this may not be correct + // atmega32u4 + bitWrite(TCCR4B, CS43, 1); + #endif + bitWrite(TCCR4B, CS40, 1); + timer4_pin_port = portOutputRegister(digitalPinToPort(_pin)); + timer4_pin_mask = digitalPinToBitMask(_pin); + break; + #endif + + #if defined(TCCR5A) && defined(TCCR5B) && defined(TIMSK5) + case 5: + // 16 bit timer + TCCR5A = 0; + TCCR5B = 0; + bitWrite(TCCR5B, WGM52, 1); + bitWrite(TCCR5B, CS50, 1); + timer5_pin_port = portOutputRegister(digitalPinToPort(_pin)); + timer5_pin_mask = digitalPinToBitMask(_pin); + break; + #endif + } + } + + return _timer; +} + + + +// frequency (in hertz) and duration (in milliseconds). + +void tone(uint8_t _pin, unsigned int frequency, unsigned long duration) +{ + uint8_t prescalarbits = 0b001; + long toggle_count = 0; + uint32_t ocr = 0; + int8_t _timer; + + _timer = toneBegin(_pin); + + if (_timer >= 0) + { + // Set the pinMode as OUTPUT + pinMode(_pin, OUTPUT); + + // if we are using an 8 bit timer, scan through prescalars to find the best fit + if (_timer == 0 || _timer == 2) + { + ocr = F_CPU / frequency / 2 - 1; + prescalarbits = 0b001; // ck/1: same for both timers + if (ocr > 255) + { + ocr = F_CPU / frequency / 2 / 8 - 1; + prescalarbits = 0b010; // ck/8: same for both timers + + if (_timer == 2 && ocr > 255) + { + ocr = F_CPU / frequency / 2 / 32 - 1; + prescalarbits = 0b011; + } + + if (ocr > 255) + { + ocr = F_CPU / frequency / 2 / 64 - 1; + prescalarbits = _timer == 0 ? 0b011 : 0b100; + + if (_timer == 2 && ocr > 255) + { + ocr = F_CPU / frequency / 2 / 128 - 1; + prescalarbits = 0b101; + } + + if (ocr > 255) + { + ocr = F_CPU / frequency / 2 / 256 - 1; + prescalarbits = _timer == 0 ? 0b100 : 0b110; + if (ocr > 255) + { + // can't do any better than /1024 + ocr = F_CPU / frequency / 2 / 1024 - 1; + prescalarbits = _timer == 0 ? 0b101 : 0b111; + } + } + } + } + +#if defined(TCCR0B) + if (_timer == 0) + { + TCCR0B = prescalarbits; + } + else +#endif +#if defined(TCCR2B) + { + TCCR2B = prescalarbits; + } +#else + { + // dummy place holder to make the above ifdefs work + } +#endif + } + else + { + // two choices for the 16 bit timers: ck/1 or ck/64 + ocr = F_CPU / frequency / 2 - 1; + + prescalarbits = 0b001; + if (ocr > 0xffff) + { + ocr = F_CPU / frequency / 2 / 64 - 1; + prescalarbits = 0b011; + } + + if (_timer == 1) + { +#if defined(TCCR1B) + TCCR1B = (TCCR1B & 0b11111000) | prescalarbits; +#endif + } +#if defined(TCCR3B) + else if (_timer == 3) + TCCR3B = (TCCR3B & 0b11111000) | prescalarbits; +#endif +#if defined(TCCR4B) + else if (_timer == 4) + TCCR4B = (TCCR4B & 0b11111000) | prescalarbits; +#endif +#if defined(TCCR5B) + else if (_timer == 5) + TCCR5B = (TCCR5B & 0b11111000) | prescalarbits; +#endif + + } + + + // Calculate the toggle count + if (duration > 0) + { + toggle_count = 2 * frequency * duration / 1000; + } + else + { + toggle_count = -1; + } + + // Set the OCR for the given timer, + // set the toggle count, + // then turn on the interrupts + switch (_timer) + { + +#if defined(OCR0A) && defined(TIMSK0) && defined(OCIE0A) + case 0: + OCR0A = ocr; + timer0_toggle_count = toggle_count; + bitWrite(TIMSK0, OCIE0A, 1); + break; +#endif + + case 1: +#if defined(OCR1A) && defined(TIMSK1) && defined(OCIE1A) + OCR1A = ocr; + timer1_toggle_count = toggle_count; + bitWrite(TIMSK1, OCIE1A, 1); +#elif defined(OCR1A) && defined(TIMSK) && defined(OCIE1A) + // this combination is for at least the ATmega32 + OCR1A = ocr; + timer1_toggle_count = toggle_count; + bitWrite(TIMSK, OCIE1A, 1); +#endif + break; + +#if defined(OCR2A) && defined(TIMSK2) && defined(OCIE2A) + case 2: + OCR2A = ocr; + timer2_toggle_count = toggle_count; + bitWrite(TIMSK2, OCIE2A, 1); + break; +#endif + +#if defined(TIMSK3) + case 3: + OCR3A = ocr; + timer3_toggle_count = toggle_count; + bitWrite(TIMSK3, OCIE3A, 1); + break; +#endif + +#if defined(TIMSK4) + case 4: + OCR4A = ocr; + timer4_toggle_count = toggle_count; + bitWrite(TIMSK4, OCIE4A, 1); + break; +#endif + +#if defined(OCR5A) && defined(TIMSK5) && defined(OCIE5A) + case 5: + OCR5A = ocr; + timer5_toggle_count = toggle_count; + bitWrite(TIMSK5, OCIE5A, 1); + break; +#endif + + } + } +} + + +// XXX: this function only works properly for timer 2 (the only one we use +// currently). for the others, it should end the tone, but won't restore +// proper PWM functionality for the timer. +void disableTimer(uint8_t _timer) +{ + switch (_timer) + { + case 0: + #if defined(TIMSK0) + TIMSK0 = 0; + #elif defined(TIMSK) + TIMSK = 0; // atmega32 + #endif + break; + +#if defined(TIMSK1) && defined(OCIE1A) + case 1: + bitWrite(TIMSK1, OCIE1A, 0); + break; +#endif + + case 2: + #if defined(TIMSK2) && defined(OCIE2A) + bitWrite(TIMSK2, OCIE2A, 0); // disable interrupt + #endif + #if defined(TCCR2A) && defined(WGM20) + TCCR2A = (1 << WGM20); + #endif + #if defined(TCCR2B) && defined(CS22) + TCCR2B = (TCCR2B & 0b11111000) | (1 << CS22); + #endif + #if defined(OCR2A) + OCR2A = 0; + #endif + break; + +#if defined(TIMSK3) + case 3: + TIMSK3 = 0; + break; +#endif + +#if defined(TIMSK4) + case 4: + TIMSK4 = 0; + break; +#endif + +#if defined(TIMSK5) + case 5: + TIMSK5 = 0; + break; +#endif + } +} + + +void noTone(uint8_t _pin) +{ + int8_t _timer = -1; + + for (int i = 0; i < AVAILABLE_TONE_PINS; i++) { + if (tone_pins[i] == _pin) { + _timer = pgm_read_byte(tone_pin_to_timer_PGM + i); + tone_pins[i] = 255; + } + } + + disableTimer(_timer); + + digitalWrite(_pin, 0); +} + +#if 0 +#if !defined(__AVR_ATmega8__) +ISR(TIMER0_COMPA_vect) +{ + if (timer0_toggle_count != 0) + { + // toggle the pin + *timer0_pin_port ^= timer0_pin_mask; + + if (timer0_toggle_count > 0) + timer0_toggle_count--; + } + else + { + disableTimer(0); + *timer0_pin_port &= ~(timer0_pin_mask); // keep pin low after stop + } +} +#endif + + +ISR(TIMER1_COMPA_vect) +{ + if (timer1_toggle_count != 0) + { + // toggle the pin + *timer1_pin_port ^= timer1_pin_mask; + + if (timer1_toggle_count > 0) + timer1_toggle_count--; + } + else + { + disableTimer(1); + *timer1_pin_port &= ~(timer1_pin_mask); // keep pin low after stop + } +} +#endif + + +ISR(TIMER2_COMPA_vect) +{ + + if (timer2_toggle_count != 0) + { + // toggle the pin + *timer2_pin_port ^= timer2_pin_mask; + + if (timer2_toggle_count > 0) + timer2_toggle_count--; + } + else + { + // need to call noTone() so that the tone_pins[] entry is reset, so the + // timer gets initialized next time we call tone(). + // XXX: this assumes timer 2 is always the first one used. + noTone(tone_pins[0]); +// disableTimer(2); +// *timer2_pin_port &= ~(timer2_pin_mask); // keep pin low after stop + } +} + + + +//#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) +#if 0 + +ISR(TIMER3_COMPA_vect) +{ + if (timer3_toggle_count != 0) + { + // toggle the pin + *timer3_pin_port ^= timer3_pin_mask; + + if (timer3_toggle_count > 0) + timer3_toggle_count--; + } + else + { + disableTimer(3); + *timer3_pin_port &= ~(timer3_pin_mask); // keep pin low after stop + } +} + +ISR(TIMER4_COMPA_vect) +{ + if (timer4_toggle_count != 0) + { + // toggle the pin + *timer4_pin_port ^= timer4_pin_mask; + + if (timer4_toggle_count > 0) + timer4_toggle_count--; + } + else + { + disableTimer(4); + *timer4_pin_port &= ~(timer4_pin_mask); // keep pin low after stop + } +} + +ISR(TIMER5_COMPA_vect) +{ + if (timer5_toggle_count != 0) + { + // toggle the pin + *timer5_pin_port ^= timer5_pin_mask; + + if (timer5_toggle_count > 0) + timer5_toggle_count--; + } + else + { + disableTimer(5); + *timer5_pin_port &= ~(timer5_pin_mask); // keep pin low after stop + } +} + +#endif diff --git a/test/ardmake/hardware/cores/arduino/WCharacter.h b/test/ardmake/hardware/cores/arduino/WCharacter.h new file mode 100644 index 0000000..79733b5 --- /dev/null +++ b/test/ardmake/hardware/cores/arduino/WCharacter.h @@ -0,0 +1,168 @@ +/* + WCharacter.h - Character utility functions for Wiring & Arduino + Copyright (c) 2010 Hernando Barragan. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef Character_h +#define Character_h + +#include + +// WCharacter.h prototypes +inline boolean isAlphaNumeric(int c) __attribute__((always_inline)); +inline boolean isAlpha(int c) __attribute__((always_inline)); +inline boolean isAscii(int c) __attribute__((always_inline)); +inline boolean isWhitespace(int c) __attribute__((always_inline)); +inline boolean isControl(int c) __attribute__((always_inline)); +inline boolean isDigit(int c) __attribute__((always_inline)); +inline boolean isGraph(int c) __attribute__((always_inline)); +inline boolean isLowerCase(int c) __attribute__((always_inline)); +inline boolean isPrintable(int c) __attribute__((always_inline)); +inline boolean isPunct(int c) __attribute__((always_inline)); +inline boolean isSpace(int c) __attribute__((always_inline)); +inline boolean isUpperCase(int c) __attribute__((always_inline)); +inline boolean isHexadecimalDigit(int c) __attribute__((always_inline)); +inline int toAscii(int c) __attribute__((always_inline)); +inline int toLowerCase(int c) __attribute__((always_inline)); +inline int toUpperCase(int c)__attribute__((always_inline)); + + +// Checks for an alphanumeric character. +// It is equivalent to (isalpha(c) || isdigit(c)). +inline boolean isAlphaNumeric(int c) +{ + return ( isalnum(c) == 0 ? false : true); +} + + +// Checks for an alphabetic character. +// It is equivalent to (isupper(c) || islower(c)). +inline boolean isAlpha(int c) +{ + return ( isalpha(c) == 0 ? false : true); +} + + +// Checks whether c is a 7-bit unsigned char value +// that fits into the ASCII character set. +inline boolean isAscii(int c) +{ + return ( isascii (c) == 0 ? false : true); +} + + +// Checks for a blank character, that is, a space or a tab. +inline boolean isWhitespace(int c) +{ + return ( isblank (c) == 0 ? false : true); +} + + +// Checks for a control character. +inline boolean isControl(int c) +{ + return ( iscntrl (c) == 0 ? false : true); +} + + +// Checks for a digit (0 through 9). +inline boolean isDigit(int c) +{ + return ( isdigit (c) == 0 ? false : true); +} + + +// Checks for any printable character except space. +inline boolean isGraph(int c) +{ + return ( isgraph (c) == 0 ? false : true); +} + + +// Checks for a lower-case character. +inline boolean isLowerCase(int c) +{ + return (islower (c) == 0 ? false : true); +} + + +// Checks for any printable character including space. +inline boolean isPrintable(int c) +{ + return ( isprint (c) == 0 ? false : true); +} + + +// Checks for any printable character which is not a space +// or an alphanumeric character. +inline boolean isPunct(int c) +{ + return ( ispunct (c) == 0 ? false : true); +} + + +// Checks for white-space characters. For the avr-libc library, +// these are: space, formfeed ('\f'), newline ('\n'), carriage +// return ('\r'), horizontal tab ('\t'), and vertical tab ('\v'). +inline boolean isSpace(int c) +{ + return ( isspace (c) == 0 ? false : true); +} + + +// Checks for an uppercase letter. +inline boolean isUpperCase(int c) +{ + return ( isupper (c) == 0 ? false : true); +} + + +// Checks for a hexadecimal digits, i.e. one of 0 1 2 3 4 5 6 7 +// 8 9 a b c d e f A B C D E F. +inline boolean isHexadecimalDigit(int c) +{ + return ( isxdigit (c) == 0 ? false : true); +} + + +// Converts c to a 7-bit unsigned char value that fits into the +// ASCII character set, by clearing the high-order bits. +inline int toAscii(int c) +{ + return toascii (c); +} + + +// Warning: +// Many people will be unhappy if you use this function. +// This function will convert accented letters into random +// characters. + +// Converts the letter c to lower case, if possible. +inline int toLowerCase(int c) +{ + return tolower (c); +} + + +// Converts the letter c to upper case, if possible. +inline int toUpperCase(int c) +{ + return toupper (c); +} + +#endif \ No newline at end of file diff --git a/test/ardmake/hardware/cores/arduino/WConstants.h b/test/ardmake/hardware/cores/arduino/WConstants.h new file mode 100644 index 0000000..3e19ac4 --- /dev/null +++ b/test/ardmake/hardware/cores/arduino/WConstants.h @@ -0,0 +1 @@ +#include "wiring.h" diff --git a/test/ardmake/hardware/cores/arduino/WInterrupts.c b/test/ardmake/hardware/cores/arduino/WInterrupts.c new file mode 100644 index 0000000..3b3e0c9 --- /dev/null +++ b/test/ardmake/hardware/cores/arduino/WInterrupts.c @@ -0,0 +1,249 @@ +/* -*- mode: jde; c-basic-offset: 2; indent-tabs-mode: nil -*- */ + +/* + Part of the Wiring project - http://wiring.uniandes.edu.co + + Copyright (c) 2004-05 Hernando Barragan + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + Modified 24 November 2006 by David A. Mellis + Modified 1 August 2010 by Mark Sproul +*/ + +#include +#include +#include +#include +#include + +#include "WConstants.h" +#include "wiring_private.h" + +volatile static voidFuncPtr intFunc[EXTERNAL_NUM_INTERRUPTS]; +// volatile static voidFuncPtr twiIntFunc; + +void attachInterrupt(uint8_t interruptNum, void (*userFunc)(void), int mode) { + if(interruptNum < EXTERNAL_NUM_INTERRUPTS) { + intFunc[interruptNum] = userFunc; + + // Configure the interrupt mode (trigger on low input, any change, rising + // edge, or falling edge). The mode constants were chosen to correspond + // to the configuration bits in the hardware register, so we simply shift + // the mode into place. + + // Enable the interrupt. + + switch (interruptNum) { +#if defined(EICRA) && defined(EICRB) && defined(EIMSK) + case 2: + EICRA = (EICRA & ~((1 << ISC00) | (1 << ISC01))) | (mode << ISC00); + EIMSK |= (1 << INT0); + break; + case 3: + EICRA = (EICRA & ~((1 << ISC10) | (1 << ISC11))) | (mode << ISC10); + EIMSK |= (1 << INT1); + break; + case 4: + EICRA = (EICRA & ~((1 << ISC20) | (1 << ISC21))) | (mode << ISC20); + EIMSK |= (1 << INT2); + break; + case 5: + EICRA = (EICRA & ~((1 << ISC30) | (1 << ISC31))) | (mode << ISC30); + EIMSK |= (1 << INT3); + break; + case 0: + EICRB = (EICRB & ~((1 << ISC40) | (1 << ISC41))) | (mode << ISC40); + EIMSK |= (1 << INT4); + break; + case 1: + EICRB = (EICRB & ~((1 << ISC50) | (1 << ISC51))) | (mode << ISC50); + EIMSK |= (1 << INT5); + break; + case 6: + EICRB = (EICRB & ~((1 << ISC60) | (1 << ISC61))) | (mode << ISC60); + EIMSK |= (1 << INT6); + break; + case 7: + EICRB = (EICRB & ~((1 << ISC70) | (1 << ISC71))) | (mode << ISC70); + EIMSK |= (1 << INT7); + break; +#else + case 0: + #if defined(EICRA) && defined(ISC00) && defined(EIMSK) + EICRA = (EICRA & ~((1 << ISC00) | (1 << ISC01))) | (mode << ISC00); + EIMSK |= (1 << INT0); + #elif defined(MCUCR) && defined(ISC00) && defined(GICR) + MCUCR = (MCUCR & ~((1 << ISC00) | (1 << ISC01))) | (mode << ISC00); + GICR |= (1 << INT0); + #elif defined(MCUCR) && defined(ISC00) && defined(GIMSK) + MCUCR = (MCUCR & ~((1 << ISC00) | (1 << ISC01))) | (mode << ISC00); + GIMSK |= (1 << INT0); + #else + #error attachInterrupt not finished for this CPU (case 0) + #endif + break; + + case 1: + #if defined(EICRA) && defined(ISC10) && defined(ISC11) && defined(EIMSK) + EICRA = (EICRA & ~((1 << ISC10) | (1 << ISC11))) | (mode << ISC10); + EIMSK |= (1 << INT1); + #elif defined(MCUCR) && defined(ISC10) && defined(ISC11) && defined(GICR) + MCUCR = (MCUCR & ~((1 << ISC10) | (1 << ISC11))) | (mode << ISC10); + GICR |= (1 << INT1); + #elif defined(MCUCR) && defined(ISC10) && defined(GIMSK) && defined(GIMSK) + MCUCR = (MCUCR & ~((1 << ISC10) | (1 << ISC11))) | (mode << ISC10); + GIMSK |= (1 << INT1); + #else + #warning attachInterrupt may need some more work for this cpu (case 1) + #endif + break; +#endif + } + } +} + +void detachInterrupt(uint8_t interruptNum) { + if(interruptNum < EXTERNAL_NUM_INTERRUPTS) { + // Disable the interrupt. (We can't assume that interruptNum is equal + // to the number of the EIMSK bit to clear, as this isn't true on the + // ATmega8. There, INT0 is 6 and INT1 is 7.) + switch (interruptNum) { +#if defined(EICRA) && defined(EICRB) && defined(EIMSK) + case 2: + EIMSK &= ~(1 << INT0); + break; + case 3: + EIMSK &= ~(1 << INT1); + break; + case 4: + EIMSK &= ~(1 << INT2); + break; + case 5: + EIMSK &= ~(1 << INT3); + break; + case 0: + EIMSK &= ~(1 << INT4); + break; + case 1: + EIMSK &= ~(1 << INT5); + break; + case 6: + EIMSK &= ~(1 << INT6); + break; + case 7: + EIMSK &= ~(1 << INT7); + break; +#else + case 0: + #if defined(EIMSK) && defined(INT0) + EIMSK &= ~(1 << INT0); + #elif defined(GICR) && defined(ISC00) + GICR &= ~(1 << INT0); // atmega32 + #elif defined(GIMSK) && defined(INT0) + GIMSK &= ~(1 << INT0); + #else + #error detachInterrupt not finished for this cpu + #endif + break; + + case 1: + #if defined(EIMSK) && defined(INT1) + EIMSK &= ~(1 << INT1); + #elif defined(GICR) && defined(INT1) + GICR &= ~(1 << INT1); // atmega32 + #elif defined(GIMSK) && defined(INT1) + GIMSK &= ~(1 << INT1); + #else + #warning detachInterrupt may need some more work for this cpu (case 1) + #endif + break; +#endif + } + + intFunc[interruptNum] = 0; + } +} + +/* +void attachInterruptTwi(void (*userFunc)(void) ) { + twiIntFunc = userFunc; +} +*/ + +#if defined(EICRA) && defined(EICRB) + +SIGNAL(INT0_vect) { + if(intFunc[EXTERNAL_INT_2]) + intFunc[EXTERNAL_INT_2](); +} + +SIGNAL(INT1_vect) { + if(intFunc[EXTERNAL_INT_3]) + intFunc[EXTERNAL_INT_3](); +} + +SIGNAL(INT2_vect) { + if(intFunc[EXTERNAL_INT_4]) + intFunc[EXTERNAL_INT_4](); +} + +SIGNAL(INT3_vect) { + if(intFunc[EXTERNAL_INT_5]) + intFunc[EXTERNAL_INT_5](); +} + +SIGNAL(INT4_vect) { + if(intFunc[EXTERNAL_INT_0]) + intFunc[EXTERNAL_INT_0](); +} + +SIGNAL(INT5_vect) { + if(intFunc[EXTERNAL_INT_1]) + intFunc[EXTERNAL_INT_1](); +} + +SIGNAL(INT6_vect) { + if(intFunc[EXTERNAL_INT_6]) + intFunc[EXTERNAL_INT_6](); +} + +SIGNAL(INT7_vect) { + if(intFunc[EXTERNAL_INT_7]) + intFunc[EXTERNAL_INT_7](); +} + +#else + +SIGNAL(INT0_vect) { + if(intFunc[EXTERNAL_INT_0]) + intFunc[EXTERNAL_INT_0](); +} + +SIGNAL(INT1_vect) { + if(intFunc[EXTERNAL_INT_1]) + intFunc[EXTERNAL_INT_1](); +} + +#endif + +/* +SIGNAL(SIG_2WIRE_SERIAL) { + if(twiIntFunc) + twiIntFunc(); +} +*/ + diff --git a/test/ardmake/hardware/cores/arduino/WInterrupts.d b/test/ardmake/hardware/cores/arduino/WInterrupts.d new file mode 100644 index 0000000..73a0256 --- /dev/null +++ b/test/ardmake/hardware/cores/arduino/WInterrupts.d @@ -0,0 +1,24 @@ +ardmake/hardware/cores/arduino/WInterrupts.o ardmake/hardware/cores/arduino/WInterrupts.d: ardmake/hardware/cores/arduino/WInterrupts.c \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/inttypes.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/stdint.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/io.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/sfr_defs.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/iom328p.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/portpins.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/common.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/version.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/fuse.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/lock.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/interrupt.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/pgmspace.h \ + /usr/lib/gcc/avr/4.3.5/include/stddef.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/stdio.h \ + /usr/lib/gcc/avr/4.3.5/include/stdarg.h \ + ardmake/hardware/cores/arduino/WConstants.h \ + ardmake/hardware/cores/arduino/wiring.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/stdlib.h \ + ardmake/hardware/cores/arduino/binary.h \ + ardmake/hardware/cores/arduino/wiring_private.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/delay.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/util/delay.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/util/delay_basic.h diff --git a/test/ardmake/hardware/cores/arduino/WMath.cpp b/test/ardmake/hardware/cores/arduino/WMath.cpp new file mode 100644 index 0000000..2120c4c --- /dev/null +++ b/test/ardmake/hardware/cores/arduino/WMath.cpp @@ -0,0 +1,60 @@ +/* -*- mode: jde; c-basic-offset: 2; indent-tabs-mode: nil -*- */ + +/* + Part of the Wiring project - http://wiring.org.co + Copyright (c) 2004-06 Hernando Barragan + Modified 13 August 2006, David A. Mellis for Arduino - http://www.arduino.cc/ + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + $Id$ +*/ + +extern "C" { + #include "stdlib.h" +} + +void randomSeed(unsigned int seed) +{ + if (seed != 0) { + srandom(seed); + } +} + +long random(long howbig) +{ + if (howbig == 0) { + return 0; + } + return random() % howbig; +} + +long random(long howsmall, long howbig) +{ + if (howsmall >= howbig) { + return howsmall; + } + long diff = howbig - howsmall; + return random(diff) + howsmall; +} + +long map(long x, long in_min, long in_max, long out_min, long out_max) +{ + return (x - in_min) * (out_max - out_min) / (in_max - in_min) + out_min; +} + +unsigned int makeWord(unsigned int w) { return w; } +unsigned int makeWord(unsigned char h, unsigned char l) { return (h << 8) | l; } \ No newline at end of file diff --git a/test/ardmake/hardware/cores/arduino/WMath.d b/test/ardmake/hardware/cores/arduino/WMath.d new file mode 100644 index 0000000..dd4d873 --- /dev/null +++ b/test/ardmake/hardware/cores/arduino/WMath.d @@ -0,0 +1,3 @@ +ardmake/hardware/cores/arduino/WMath.o ardmake/hardware/cores/arduino/WMath.d: ardmake/hardware/cores/arduino/WMath.cpp \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/stdlib.h \ + /usr/lib/gcc/avr/4.3.5/include/stddef.h diff --git a/test/ardmake/hardware/cores/arduino/WProgram.h b/test/ardmake/hardware/cores/arduino/WProgram.h new file mode 100644 index 0000000..f73e760 --- /dev/null +++ b/test/ardmake/hardware/cores/arduino/WProgram.h @@ -0,0 +1,63 @@ +#ifndef WProgram_h +#define WProgram_h + +#include +#include +#include + +#include + +#include "wiring.h" + +#ifdef __cplusplus +#include "WCharacter.h" +#include "WString.h" +#include "HardwareSerial.h" + +uint16_t makeWord(uint16_t w); +uint16_t makeWord(byte h, byte l); + +#define word(...) makeWord(__VA_ARGS__) + +unsigned long pulseIn(uint8_t pin, uint8_t state, unsigned long timeout = 1000000L); + +void tone(uint8_t _pin, unsigned int frequency, unsigned long duration = 0); +void noTone(uint8_t _pin); + +// WMath prototypes +long random(long); +long random(long, long); +void randomSeed(unsigned int); +long map(long, long, long, long, long); + +#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) +const static uint8_t A0 = 54; +const static uint8_t A1 = 55; +const static uint8_t A2 = 56; +const static uint8_t A3 = 57; +const static uint8_t A4 = 58; +const static uint8_t A5 = 59; +const static uint8_t A6 = 60; +const static uint8_t A7 = 61; +const static uint8_t A8 = 62; +const static uint8_t A9 = 63; +const static uint8_t A10 = 64; +const static uint8_t A11 = 65; +const static uint8_t A12 = 66; +const static uint8_t A13 = 67; +const static uint8_t A14 = 68; +const static uint8_t A15 = 69; +#else +const static uint8_t A0 = 14; +const static uint8_t A1 = 15; +const static uint8_t A2 = 16; +const static uint8_t A3 = 17; +const static uint8_t A4 = 18; +const static uint8_t A5 = 19; +const static uint8_t A6 = 20; +const static uint8_t A7 = 21; +#endif + +#endif + +#endif \ No newline at end of file diff --git a/test/ardmake/hardware/cores/arduino/WString.cpp b/test/ardmake/hardware/cores/arduino/WString.cpp new file mode 100644 index 0000000..db5a441 --- /dev/null +++ b/test/ardmake/hardware/cores/arduino/WString.cpp @@ -0,0 +1,443 @@ +/* + WString.cpp - String library for Wiring & Arduino + Copyright (c) 2009-10 Hernando Barragan. All rights reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#include +#include "WProgram.h" +#include "WString.h" + + +String::String( const char *value ) +{ + if ( value == NULL ) + value = ""; + getBuffer( _length = strlen( value ) ); + if ( _buffer != NULL ) + strcpy( _buffer, value ); +} + +String::String( const String &value ) +{ + getBuffer( _length = value._length ); + if ( _buffer != NULL ) + strcpy( _buffer, value._buffer ); +} + +String::String( const char value ) +{ + _length = 1; + getBuffer(1); + if ( _buffer != NULL ) { + _buffer[0] = value; + _buffer[1] = 0; + } +} + +String::String( const unsigned char value ) +{ + _length = 1; + getBuffer(1); + if ( _buffer != NULL) { + _buffer[0] = value; + _buffer[1] = 0; + } +} + +String::String( const int value, const int base ) +{ + char buf[33]; + itoa((signed long)value, buf, base); + getBuffer( _length = strlen(buf) ); + if ( _buffer != NULL ) + strcpy( _buffer, buf ); +} + +String::String( const unsigned int value, const int base ) +{ + char buf[33]; + ultoa((unsigned long)value, buf, base); + getBuffer( _length = strlen(buf) ); + if ( _buffer != NULL ) + strcpy( _buffer, buf ); +} + +String::String( const long value, const int base ) +{ + char buf[33]; + ltoa(value, buf, base); + getBuffer( _length = strlen(buf) ); + if ( _buffer != NULL ) + strcpy( _buffer, buf ); +} + +String::String( const unsigned long value, const int base ) +{ + char buf[33]; + ultoa(value, buf, 10); + getBuffer( _length = strlen(buf) ); + if ( _buffer != NULL ) + strcpy( _buffer, buf ); +} + +char String::charAt( unsigned int loc ) const +{ + return operator[]( loc ); +} + +void String::setCharAt( unsigned int loc, const char aChar ) +{ + if(_buffer == NULL) return; + if(_length > loc) { + _buffer[loc] = aChar; + } +} + +int String::compareTo( const String &s2 ) const +{ + return strcmp( _buffer, s2._buffer ); +} + +const String & String::concat( const String &s2 ) +{ + return (*this) += s2; +} + +const String & String::operator=( const String &rhs ) +{ + if ( this == &rhs ) + return *this; + + if ( rhs._length > _length ) + { + free(_buffer); + getBuffer( rhs._length ); + } + + if ( _buffer != NULL ) { + _length = rhs._length; + strcpy( _buffer, rhs._buffer ); + } + return *this; +} + +//const String & String::operator+=( const char aChar ) +//{ +// if ( _length == _capacity ) +// doubleBuffer(); +// +// _buffer[ _length++ ] = aChar; +// _buffer[ _length ] = '\0'; +// return *this; +//} + +const String & String::operator+=( const String &other ) +{ + _length += other._length; + if ( _length > _capacity ) + { + char *temp = (char *)realloc(_buffer, _length + 1); + if ( temp != NULL ) { + _buffer = temp; + _capacity = _length; + } else { + _length -= other._length; + return *this; + } + } + strcat( _buffer, other._buffer ); + return *this; +} + + +int String::operator==( const String &rhs ) const +{ + return ( _length == rhs._length && strcmp( _buffer, rhs._buffer ) == 0 ); +} + +int String::operator!=( const String &rhs ) const +{ + return ( _length != rhs.length() || strcmp( _buffer, rhs._buffer ) != 0 ); +} + +int String::operator<( const String &rhs ) const +{ + return strcmp( _buffer, rhs._buffer ) < 0; +} + +int String::operator>( const String &rhs ) const +{ + return strcmp( _buffer, rhs._buffer ) > 0; +} + +int String::operator<=( const String &rhs ) const +{ + return strcmp( _buffer, rhs._buffer ) <= 0; +} + +int String::operator>=( const String & rhs ) const +{ + return strcmp( _buffer, rhs._buffer ) >= 0; +} + +char & String::operator[]( unsigned int index ) +{ + static char dummy_writable_char; + if (index >= _length || !_buffer) { + dummy_writable_char = 0; + return dummy_writable_char; + } + return _buffer[ index ]; +} + +char String::operator[]( unsigned int index ) const +{ + // need to check for valid index, to do later + return _buffer[ index ]; +} + +boolean String::endsWith( const String &s2 ) const +{ + if ( _length < s2._length ) + return 0; + + return strcmp( &_buffer[ _length - s2._length], s2._buffer ) == 0; +} + +boolean String::equals( const String &s2 ) const +{ + return ( _length == s2._length && strcmp( _buffer,s2._buffer ) == 0 ); +} + +boolean String::equalsIgnoreCase( const String &s2 ) const +{ + if ( this == &s2 ) + return true; //1; + else if ( _length != s2._length ) + return false; //0; + + return strcmp(toLowerCase()._buffer, s2.toLowerCase()._buffer) == 0; +} + +String String::replace( char findChar, char replaceChar ) +{ + if ( _buffer == NULL ) return *this; + String theReturn = _buffer; + char* temp = theReturn._buffer; + while( (temp = strchr( temp, findChar )) != 0 ) + *temp = replaceChar; + + return theReturn; +} + +String String::replace( const String& match, const String& replace ) +{ + if ( _buffer == NULL ) return *this; + String temp = _buffer, newString; + + int loc; + while ( (loc = temp.indexOf( match )) != -1 ) + { + newString += temp.substring( 0, loc ); + newString += replace; + temp = temp.substring( loc + match._length ); + } + newString += temp; + return newString; +} + +int String::indexOf( char temp ) const +{ + return indexOf( temp, 0 ); +} + +int String::indexOf( char ch, unsigned int fromIndex ) const +{ + if ( fromIndex >= _length ) + return -1; + + const char* temp = strchr( &_buffer[fromIndex], ch ); + if ( temp == NULL ) + return -1; + + return temp - _buffer; +} + +int String::indexOf( const String &s2 ) const +{ + return indexOf( s2, 0 ); +} + +int String::indexOf( const String &s2, unsigned int fromIndex ) const +{ + if ( fromIndex >= _length ) + return -1; + + const char *theFind = strstr( &_buffer[ fromIndex ], s2._buffer ); + + if ( theFind == NULL ) + return -1; + + return theFind - _buffer; // pointer subtraction +} + +int String::lastIndexOf( char theChar ) const +{ + return lastIndexOf( theChar, _length - 1 ); +} + +int String::lastIndexOf( char ch, unsigned int fromIndex ) const +{ + if ( fromIndex >= _length ) + return -1; + + char tempchar = _buffer[fromIndex + 1]; + _buffer[fromIndex + 1] = '\0'; + char* temp = strrchr( _buffer, ch ); + _buffer[fromIndex + 1] = tempchar; + + if ( temp == NULL ) + return -1; + + return temp - _buffer; +} + +int String::lastIndexOf( const String &s2 ) const +{ + return lastIndexOf( s2, _length - s2._length ); +} + +int String::lastIndexOf( const String &s2, unsigned int fromIndex ) const +{ + // check for empty strings + if ( s2._length == 0 || s2._length - 1 > fromIndex || fromIndex >= _length ) + return -1; + + // matching first character + char temp = s2[ 0 ]; + + for ( int i = fromIndex; i >= 0; i-- ) + { + if ( _buffer[ i ] == temp && (*this).substring( i, i + s2._length ).equals( s2 ) ) + return i; + } + return -1; +} + +boolean String::startsWith( const String &s2 ) const +{ + if ( _length < s2._length ) + return 0; + + return startsWith( s2, 0 ); +} + +boolean String::startsWith( const String &s2, unsigned int offset ) const +{ + if ( offset > _length - s2._length ) + return 0; + + return strncmp( &_buffer[offset], s2._buffer, s2._length ) == 0; +} + +String String::substring( unsigned int left ) const +{ + return substring( left, _length ); +} + +String String::substring( unsigned int left, unsigned int right ) const +{ + if ( left > right ) + { + int temp = right; + right = left; + left = temp; + } + + if ( right > _length ) + { + right = _length; + } + + char temp = _buffer[ right ]; // save the replaced character + _buffer[ right ] = '\0'; + String outPut = ( _buffer + left ); // pointer arithmetic + _buffer[ right ] = temp; //restore character + return outPut; +} + +String String::toLowerCase() const +{ + String temp = _buffer; + + for ( unsigned int i = 0; i < _length; i++ ) + temp._buffer[ i ] = (char)tolower( temp._buffer[ i ] ); + return temp; +} + +String String::toUpperCase() const +{ + String temp = _buffer; + + for ( unsigned int i = 0; i < _length; i++ ) + temp._buffer[ i ] = (char)toupper( temp._buffer[ i ] ); + return temp; +} + +String String::trim() const +{ + if ( _buffer == NULL ) return *this; + String temp = _buffer; + unsigned int i,j; + + for ( i = 0; i < _length; i++ ) + { + if ( !isspace(_buffer[i]) ) + break; + } + + for ( j = temp._length - 1; j > i; j-- ) + { + if ( !isspace(_buffer[j]) ) + break; + } + + return temp.substring( i, j + 1); +} + +void String::getBytes(unsigned char *buf, unsigned int bufsize) +{ + if (!bufsize || !buf) return; + unsigned int len = bufsize - 1; + if (len > _length) len = _length; + strncpy((char *)buf, _buffer, len); + buf[len] = 0; +} + +void String::toCharArray(char *buf, unsigned int bufsize) +{ + if (!bufsize || !buf) return; + unsigned int len = bufsize - 1; + if (len > _length) len = _length; + strncpy(buf, _buffer, len); + buf[len] = 0; +} + + +long String::toInt() { + return atol(_buffer); +} diff --git a/test/ardmake/hardware/cores/arduino/WString.h b/test/ardmake/hardware/cores/arduino/WString.h new file mode 100644 index 0000000..cadddb9 --- /dev/null +++ b/test/ardmake/hardware/cores/arduino/WString.h @@ -0,0 +1,112 @@ +/* + WString.h - String library for Wiring & Arduino + Copyright (c) 2009-10 Hernando Barragan. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#ifndef String_h +#define String_h + +//#include "WProgram.h" +#include +#include +#include + +class String +{ + public: + // constructors + String( const char *value = "" ); + String( const String &value ); + String( const char ); + String( const unsigned char ); + String( const int, const int base=10); + String( const unsigned int, const int base=10 ); + String( const long, const int base=10 ); + String( const unsigned long, const int base=10 ); + ~String() { free(_buffer); _length = _capacity = 0;} //added _length = _capacity = 0; + + // operators + const String & operator = ( const String &rhs ); + const String & operator +=( const String &rhs ); + //const String & operator +=( const char ); + int operator ==( const String &rhs ) const; + int operator !=( const String &rhs ) const; + int operator < ( const String &rhs ) const; + int operator > ( const String &rhs ) const; + int operator <=( const String &rhs ) const; + int operator >=( const String &rhs ) const; + char operator []( unsigned int index ) const; + char& operator []( unsigned int index ); + //operator const char *() const { return _buffer; } + + // general methods + char charAt( unsigned int index ) const; + int compareTo( const String &anotherString ) const; + unsigned char endsWith( const String &suffix ) const; + unsigned char equals( const String &anObject ) const; + unsigned char equalsIgnoreCase( const String &anotherString ) const; + int indexOf( char ch ) const; + int indexOf( char ch, unsigned int fromIndex ) const; + int indexOf( const String &str ) const; + int indexOf( const String &str, unsigned int fromIndex ) const; + int lastIndexOf( char ch ) const; + int lastIndexOf( char ch, unsigned int fromIndex ) const; + int lastIndexOf( const String &str ) const; + int lastIndexOf( const String &str, unsigned int fromIndex ) const; + const unsigned int length( ) const { return _length; } + void setCharAt(unsigned int index, const char ch); + unsigned char startsWith( const String &prefix ) const; + unsigned char startsWith( const String &prefix, unsigned int toffset ) const; + String substring( unsigned int beginIndex ) const; + String substring( unsigned int beginIndex, unsigned int endIndex ) const; + String toLowerCase( ) const; + String toUpperCase( ) const; + String trim( ) const; + void getBytes(unsigned char *buf, unsigned int bufsize); + void toCharArray(char *buf, unsigned int bufsize); + long toInt( ); + const String& concat( const String &str ); + String replace( char oldChar, char newChar ); + String replace( const String& match, const String& replace ); + friend String operator + ( String lhs, const String &rhs ); + + protected: + char *_buffer; // the actual char array + unsigned int _capacity; // the array length minus one (for the '\0') + unsigned int _length; // the String length (not counting the '\0') + + void getBuffer(unsigned int maxStrLen); + + private: + +}; + +// allocate buffer space +inline void String::getBuffer(unsigned int maxStrLen) +{ + _capacity = maxStrLen; + _buffer = (char *) malloc(_capacity + 1); + if (_buffer == NULL) _length = _capacity = 0; +} + +inline String operator+( String lhs, const String &rhs ) +{ + return lhs += rhs; +} + + +#endif diff --git a/test/ardmake/hardware/cores/arduino/binary.h b/test/ardmake/hardware/cores/arduino/binary.h new file mode 100644 index 0000000..af14980 --- /dev/null +++ b/test/ardmake/hardware/cores/arduino/binary.h @@ -0,0 +1,515 @@ +#ifndef Binary_h +#define Binary_h + +#define B0 0 +#define B00 0 +#define B000 0 +#define B0000 0 +#define B00000 0 +#define B000000 0 +#define B0000000 0 +#define B00000000 0 +#define B1 1 +#define B01 1 +#define B001 1 +#define B0001 1 +#define B00001 1 +#define B000001 1 +#define B0000001 1 +#define B00000001 1 +#define B10 2 +#define B010 2 +#define B0010 2 +#define B00010 2 +#define B000010 2 +#define B0000010 2 +#define B00000010 2 +#define B11 3 +#define B011 3 +#define B0011 3 +#define B00011 3 +#define B000011 3 +#define B0000011 3 +#define B00000011 3 +#define B100 4 +#define B0100 4 +#define B00100 4 +#define B000100 4 +#define B0000100 4 +#define B00000100 4 +#define B101 5 +#define B0101 5 +#define B00101 5 +#define B000101 5 +#define B0000101 5 +#define B00000101 5 +#define B110 6 +#define B0110 6 +#define B00110 6 +#define B000110 6 +#define B0000110 6 +#define B00000110 6 +#define B111 7 +#define B0111 7 +#define B00111 7 +#define B000111 7 +#define B0000111 7 +#define B00000111 7 +#define B1000 8 +#define B01000 8 +#define B001000 8 +#define B0001000 8 +#define B00001000 8 +#define B1001 9 +#define B01001 9 +#define B001001 9 +#define B0001001 9 +#define B00001001 9 +#define B1010 10 +#define B01010 10 +#define B001010 10 +#define B0001010 10 +#define B00001010 10 +#define B1011 11 +#define B01011 11 +#define B001011 11 +#define B0001011 11 +#define B00001011 11 +#define B1100 12 +#define B01100 12 +#define B001100 12 +#define B0001100 12 +#define B00001100 12 +#define B1101 13 +#define B01101 13 +#define B001101 13 +#define B0001101 13 +#define B00001101 13 +#define B1110 14 +#define B01110 14 +#define B001110 14 +#define B0001110 14 +#define B00001110 14 +#define B1111 15 +#define B01111 15 +#define B001111 15 +#define B0001111 15 +#define B00001111 15 +#define B10000 16 +#define B010000 16 +#define B0010000 16 +#define B00010000 16 +#define B10001 17 +#define B010001 17 +#define B0010001 17 +#define B00010001 17 +#define B10010 18 +#define B010010 18 +#define B0010010 18 +#define B00010010 18 +#define B10011 19 +#define B010011 19 +#define B0010011 19 +#define B00010011 19 +#define B10100 20 +#define B010100 20 +#define B0010100 20 +#define B00010100 20 +#define B10101 21 +#define B010101 21 +#define B0010101 21 +#define B00010101 21 +#define B10110 22 +#define B010110 22 +#define B0010110 22 +#define B00010110 22 +#define B10111 23 +#define B010111 23 +#define B0010111 23 +#define B00010111 23 +#define B11000 24 +#define B011000 24 +#define B0011000 24 +#define B00011000 24 +#define B11001 25 +#define B011001 25 +#define B0011001 25 +#define B00011001 25 +#define B11010 26 +#define B011010 26 +#define B0011010 26 +#define B00011010 26 +#define B11011 27 +#define B011011 27 +#define B0011011 27 +#define B00011011 27 +#define B11100 28 +#define B011100 28 +#define B0011100 28 +#define B00011100 28 +#define B11101 29 +#define B011101 29 +#define B0011101 29 +#define B00011101 29 +#define B11110 30 +#define B011110 30 +#define B0011110 30 +#define B00011110 30 +#define B11111 31 +#define B011111 31 +#define B0011111 31 +#define B00011111 31 +#define B100000 32 +#define B0100000 32 +#define B00100000 32 +#define B100001 33 +#define B0100001 33 +#define B00100001 33 +#define B100010 34 +#define B0100010 34 +#define B00100010 34 +#define B100011 35 +#define B0100011 35 +#define B00100011 35 +#define B100100 36 +#define B0100100 36 +#define B00100100 36 +#define B100101 37 +#define B0100101 37 +#define B00100101 37 +#define B100110 38 +#define B0100110 38 +#define B00100110 38 +#define B100111 39 +#define B0100111 39 +#define B00100111 39 +#define B101000 40 +#define B0101000 40 +#define B00101000 40 +#define B101001 41 +#define B0101001 41 +#define B00101001 41 +#define B101010 42 +#define B0101010 42 +#define B00101010 42 +#define B101011 43 +#define B0101011 43 +#define B00101011 43 +#define B101100 44 +#define B0101100 44 +#define B00101100 44 +#define B101101 45 +#define B0101101 45 +#define B00101101 45 +#define B101110 46 +#define B0101110 46 +#define B00101110 46 +#define B101111 47 +#define B0101111 47 +#define B00101111 47 +#define B110000 48 +#define B0110000 48 +#define B00110000 48 +#define B110001 49 +#define B0110001 49 +#define B00110001 49 +#define B110010 50 +#define B0110010 50 +#define B00110010 50 +#define B110011 51 +#define B0110011 51 +#define B00110011 51 +#define B110100 52 +#define B0110100 52 +#define B00110100 52 +#define B110101 53 +#define B0110101 53 +#define B00110101 53 +#define B110110 54 +#define B0110110 54 +#define B00110110 54 +#define B110111 55 +#define B0110111 55 +#define B00110111 55 +#define B111000 56 +#define B0111000 56 +#define B00111000 56 +#define B111001 57 +#define B0111001 57 +#define B00111001 57 +#define B111010 58 +#define B0111010 58 +#define B00111010 58 +#define B111011 59 +#define B0111011 59 +#define B00111011 59 +#define B111100 60 +#define B0111100 60 +#define B00111100 60 +#define B111101 61 +#define B0111101 61 +#define B00111101 61 +#define B111110 62 +#define B0111110 62 +#define B00111110 62 +#define B111111 63 +#define B0111111 63 +#define B00111111 63 +#define B1000000 64 +#define B01000000 64 +#define B1000001 65 +#define B01000001 65 +#define B1000010 66 +#define B01000010 66 +#define B1000011 67 +#define B01000011 67 +#define B1000100 68 +#define B01000100 68 +#define B1000101 69 +#define B01000101 69 +#define B1000110 70 +#define B01000110 70 +#define B1000111 71 +#define B01000111 71 +#define B1001000 72 +#define B01001000 72 +#define B1001001 73 +#define B01001001 73 +#define B1001010 74 +#define B01001010 74 +#define B1001011 75 +#define B01001011 75 +#define B1001100 76 +#define B01001100 76 +#define B1001101 77 +#define B01001101 77 +#define B1001110 78 +#define B01001110 78 +#define B1001111 79 +#define B01001111 79 +#define B1010000 80 +#define B01010000 80 +#define B1010001 81 +#define B01010001 81 +#define B1010010 82 +#define B01010010 82 +#define B1010011 83 +#define B01010011 83 +#define B1010100 84 +#define B01010100 84 +#define B1010101 85 +#define B01010101 85 +#define B1010110 86 +#define B01010110 86 +#define B1010111 87 +#define B01010111 87 +#define B1011000 88 +#define B01011000 88 +#define B1011001 89 +#define B01011001 89 +#define B1011010 90 +#define B01011010 90 +#define B1011011 91 +#define B01011011 91 +#define B1011100 92 +#define B01011100 92 +#define B1011101 93 +#define B01011101 93 +#define B1011110 94 +#define B01011110 94 +#define B1011111 95 +#define B01011111 95 +#define B1100000 96 +#define B01100000 96 +#define B1100001 97 +#define B01100001 97 +#define B1100010 98 +#define B01100010 98 +#define B1100011 99 +#define B01100011 99 +#define B1100100 100 +#define B01100100 100 +#define B1100101 101 +#define B01100101 101 +#define B1100110 102 +#define B01100110 102 +#define B1100111 103 +#define B01100111 103 +#define B1101000 104 +#define B01101000 104 +#define B1101001 105 +#define B01101001 105 +#define B1101010 106 +#define B01101010 106 +#define B1101011 107 +#define B01101011 107 +#define B1101100 108 +#define B01101100 108 +#define B1101101 109 +#define B01101101 109 +#define B1101110 110 +#define B01101110 110 +#define B1101111 111 +#define B01101111 111 +#define B1110000 112 +#define B01110000 112 +#define B1110001 113 +#define B01110001 113 +#define B1110010 114 +#define B01110010 114 +#define B1110011 115 +#define B01110011 115 +#define B1110100 116 +#define B01110100 116 +#define B1110101 117 +#define B01110101 117 +#define B1110110 118 +#define B01110110 118 +#define B1110111 119 +#define B01110111 119 +#define B1111000 120 +#define B01111000 120 +#define B1111001 121 +#define B01111001 121 +#define B1111010 122 +#define B01111010 122 +#define B1111011 123 +#define B01111011 123 +#define B1111100 124 +#define B01111100 124 +#define B1111101 125 +#define B01111101 125 +#define B1111110 126 +#define B01111110 126 +#define B1111111 127 +#define B01111111 127 +#define B10000000 128 +#define B10000001 129 +#define B10000010 130 +#define B10000011 131 +#define B10000100 132 +#define B10000101 133 +#define B10000110 134 +#define B10000111 135 +#define B10001000 136 +#define B10001001 137 +#define B10001010 138 +#define B10001011 139 +#define B10001100 140 +#define B10001101 141 +#define B10001110 142 +#define B10001111 143 +#define B10010000 144 +#define B10010001 145 +#define B10010010 146 +#define B10010011 147 +#define B10010100 148 +#define B10010101 149 +#define B10010110 150 +#define B10010111 151 +#define B10011000 152 +#define B10011001 153 +#define B10011010 154 +#define B10011011 155 +#define B10011100 156 +#define B10011101 157 +#define B10011110 158 +#define B10011111 159 +#define B10100000 160 +#define B10100001 161 +#define B10100010 162 +#define B10100011 163 +#define B10100100 164 +#define B10100101 165 +#define B10100110 166 +#define B10100111 167 +#define B10101000 168 +#define B10101001 169 +#define B10101010 170 +#define B10101011 171 +#define B10101100 172 +#define B10101101 173 +#define B10101110 174 +#define B10101111 175 +#define B10110000 176 +#define B10110001 177 +#define B10110010 178 +#define B10110011 179 +#define B10110100 180 +#define B10110101 181 +#define B10110110 182 +#define B10110111 183 +#define B10111000 184 +#define B10111001 185 +#define B10111010 186 +#define B10111011 187 +#define B10111100 188 +#define B10111101 189 +#define B10111110 190 +#define B10111111 191 +#define B11000000 192 +#define B11000001 193 +#define B11000010 194 +#define B11000011 195 +#define B11000100 196 +#define B11000101 197 +#define B11000110 198 +#define B11000111 199 +#define B11001000 200 +#define B11001001 201 +#define B11001010 202 +#define B11001011 203 +#define B11001100 204 +#define B11001101 205 +#define B11001110 206 +#define B11001111 207 +#define B11010000 208 +#define B11010001 209 +#define B11010010 210 +#define B11010011 211 +#define B11010100 212 +#define B11010101 213 +#define B11010110 214 +#define B11010111 215 +#define B11011000 216 +#define B11011001 217 +#define B11011010 218 +#define B11011011 219 +#define B11011100 220 +#define B11011101 221 +#define B11011110 222 +#define B11011111 223 +#define B11100000 224 +#define B11100001 225 +#define B11100010 226 +#define B11100011 227 +#define B11100100 228 +#define B11100101 229 +#define B11100110 230 +#define B11100111 231 +#define B11101000 232 +#define B11101001 233 +#define B11101010 234 +#define B11101011 235 +#define B11101100 236 +#define B11101101 237 +#define B11101110 238 +#define B11101111 239 +#define B11110000 240 +#define B11110001 241 +#define B11110010 242 +#define B11110011 243 +#define B11110100 244 +#define B11110101 245 +#define B11110110 246 +#define B11110111 247 +#define B11111000 248 +#define B11111001 249 +#define B11111010 250 +#define B11111011 251 +#define B11111100 252 +#define B11111101 253 +#define B11111110 254 +#define B11111111 255 + +#endif diff --git a/test/ardmake/hardware/cores/arduino/main.cpp b/test/ardmake/hardware/cores/arduino/main.cpp new file mode 100644 index 0000000..cc6e81d --- /dev/null +++ b/test/ardmake/hardware/cores/arduino/main.cpp @@ -0,0 +1,14 @@ +#include + +int main(void) +{ + init(); + + setup(); + + for (;;) + loop(); + + return 0; +} + diff --git a/test/ardmake/hardware/cores/arduino/main.cxx b/test/ardmake/hardware/cores/arduino/main.cxx new file mode 100644 index 0000000..52351e4 --- /dev/null +++ b/test/ardmake/hardware/cores/arduino/main.cxx @@ -0,0 +1,12 @@ +int main(void) +{ + init(); + + setup(); + + for (;;) + loop(); + + return 0; +} + diff --git a/test/ardmake/hardware/cores/arduino/pins_arduino.c b/test/ardmake/hardware/cores/arduino/pins_arduino.c new file mode 100644 index 0000000..0c816e9 --- /dev/null +++ b/test/ardmake/hardware/cores/arduino/pins_arduino.c @@ -0,0 +1,465 @@ +/* + pins_arduino.c - pin definitions for the Arduino board + Part of Arduino / Wiring Lite + + Copyright (c) 2005 David A. Mellis + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + $Id$ +*/ + +#include +#include "wiring_private.h" +#include "pins_arduino.h" + +// On the Arduino board, digital pins are also used +// for the analog output (software PWM). Analog input +// pins are a separate set. + +// ATMEL ATMEGA8 & 168 / ARDUINO +// +// +-\/-+ +// PC6 1| |28 PC5 (AI 5) +// (D 0) PD0 2| |27 PC4 (AI 4) +// (D 1) PD1 3| |26 PC3 (AI 3) +// (D 2) PD2 4| |25 PC2 (AI 2) +// PWM+ (D 3) PD3 5| |24 PC1 (AI 1) +// (D 4) PD4 6| |23 PC0 (AI 0) +// VCC 7| |22 GND +// GND 8| |21 AREF +// PB6 9| |20 AVCC +// PB7 10| |19 PB5 (D 13) +// PWM+ (D 5) PD5 11| |18 PB4 (D 12) +// PWM+ (D 6) PD6 12| |17 PB3 (D 11) PWM +// (D 7) PD7 13| |16 PB2 (D 10) PWM +// (D 8) PB0 14| |15 PB1 (D 9) PWM +// +----+ +// +// (PWM+ indicates the additional PWM pins on the ATmega168.) + +// ATMEL ATMEGA1280 / ARDUINO +// +// 0-7 PE0-PE7 works +// 8-13 PB0-PB5 works +// 14-21 PA0-PA7 works +// 22-29 PH0-PH7 works +// 30-35 PG5-PG0 works +// 36-43 PC7-PC0 works +// 44-51 PJ7-PJ0 works +// 52-59 PL7-PL0 works +// 60-67 PD7-PD0 works +// A0-A7 PF0-PF7 +// A8-A15 PK0-PK7 + +#define PA 1 +#define PB 2 +#define PC 3 +#define PD 4 +#define PE 5 +#define PF 6 +#define PG 7 +#define PH 8 +#define PJ 10 +#define PK 11 +#define PL 12 + + +#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) +const uint16_t PROGMEM port_to_mode_PGM[] = { + NOT_A_PORT, + &DDRA, + &DDRB, + &DDRC, + &DDRD, + &DDRE, + &DDRF, + &DDRG, + &DDRH, + NOT_A_PORT, + &DDRJ, + &DDRK, + &DDRL, +}; + +const uint16_t PROGMEM port_to_output_PGM[] = { + NOT_A_PORT, + &PORTA, + &PORTB, + &PORTC, + &PORTD, + &PORTE, + &PORTF, + &PORTG, + &PORTH, + NOT_A_PORT, + &PORTJ, + &PORTK, + &PORTL, +}; + +const uint16_t PROGMEM port_to_input_PGM[] = { + NOT_A_PIN, + &PINA, + &PINB, + &PINC, + &PIND, + &PINE, + &PINF, + &PING, + &PINH, + NOT_A_PIN, + &PINJ, + &PINK, + &PINL, +}; + +const uint8_t PROGMEM digital_pin_to_port_PGM[] = { + // PORTLIST + // ------------------------------------------- + PE , // PE 0 ** 0 ** USART0_RX + PE , // PE 1 ** 1 ** USART0_TX + PE , // PE 4 ** 2 ** PWM2 + PE , // PE 5 ** 3 ** PWM3 + PG , // PG 5 ** 4 ** PWM4 + PE , // PE 3 ** 5 ** PWM5 + PH , // PH 3 ** 6 ** PWM6 + PH , // PH 4 ** 7 ** PWM7 + PH , // PH 5 ** 8 ** PWM8 + PH , // PH 6 ** 9 ** PWM9 + PB , // PB 4 ** 10 ** PWM10 + PB , // PB 5 ** 11 ** PWM11 + PB , // PB 6 ** 12 ** PWM12 + PB , // PB 7 ** 13 ** PWM13 + PJ , // PJ 1 ** 14 ** USART3_TX + PJ , // PJ 0 ** 15 ** USART3_RX + PH , // PH 1 ** 16 ** USART2_TX + PH , // PH 0 ** 17 ** USART2_RX + PD , // PD 3 ** 18 ** USART1_TX + PD , // PD 2 ** 19 ** USART1_RX + PD , // PD 1 ** 20 ** I2C_SDA + PD , // PD 0 ** 21 ** I2C_SCL + PA , // PA 0 ** 22 ** D22 + PA , // PA 1 ** 23 ** D23 + PA , // PA 2 ** 24 ** D24 + PA , // PA 3 ** 25 ** D25 + PA , // PA 4 ** 26 ** D26 + PA , // PA 5 ** 27 ** D27 + PA , // PA 6 ** 28 ** D28 + PA , // PA 7 ** 29 ** D29 + PC , // PC 7 ** 30 ** D30 + PC , // PC 6 ** 31 ** D31 + PC , // PC 5 ** 32 ** D32 + PC , // PC 4 ** 33 ** D33 + PC , // PC 3 ** 34 ** D34 + PC , // PC 2 ** 35 ** D35 + PC , // PC 1 ** 36 ** D36 + PC , // PC 0 ** 37 ** D37 + PD , // PD 7 ** 38 ** D38 + PG , // PG 2 ** 39 ** D39 + PG , // PG 1 ** 40 ** D40 + PG , // PG 0 ** 41 ** D41 + PL , // PL 7 ** 42 ** D42 + PL , // PL 6 ** 43 ** D43 + PL , // PL 5 ** 44 ** D44 + PL , // PL 4 ** 45 ** D45 + PL , // PL 3 ** 46 ** D46 + PL , // PL 2 ** 47 ** D47 + PL , // PL 1 ** 48 ** D48 + PL , // PL 0 ** 49 ** D49 + PB , // PB 3 ** 50 ** SPI_MISO + PB , // PB 2 ** 51 ** SPI_MOSI + PB , // PB 1 ** 52 ** SPI_SCK + PB , // PB 0 ** 53 ** SPI_SS + PF , // PF 0 ** 54 ** A0 + PF , // PF 1 ** 55 ** A1 + PF , // PF 2 ** 56 ** A2 + PF , // PF 3 ** 57 ** A3 + PF , // PF 4 ** 58 ** A4 + PF , // PF 5 ** 59 ** A5 + PF , // PF 6 ** 60 ** A6 + PF , // PF 7 ** 61 ** A7 + PK , // PK 0 ** 62 ** A8 + PK , // PK 1 ** 63 ** A9 + PK , // PK 2 ** 64 ** A10 + PK , // PK 3 ** 65 ** A11 + PK , // PK 4 ** 66 ** A12 + PK , // PK 5 ** 67 ** A13 + PK , // PK 6 ** 68 ** A14 + PK , // PK 7 ** 69 ** A15 +}; + +const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = { + // PIN IN PORT + // ------------------------------------------- + _BV( 0 ) , // PE 0 ** 0 ** USART0_RX + _BV( 1 ) , // PE 1 ** 1 ** USART0_TX + _BV( 4 ) , // PE 4 ** 2 ** PWM2 + _BV( 5 ) , // PE 5 ** 3 ** PWM3 + _BV( 5 ) , // PG 5 ** 4 ** PWM4 + _BV( 3 ) , // PE 3 ** 5 ** PWM5 + _BV( 3 ) , // PH 3 ** 6 ** PWM6 + _BV( 4 ) , // PH 4 ** 7 ** PWM7 + _BV( 5 ) , // PH 5 ** 8 ** PWM8 + _BV( 6 ) , // PH 6 ** 9 ** PWM9 + _BV( 4 ) , // PB 4 ** 10 ** PWM10 + _BV( 5 ) , // PB 5 ** 11 ** PWM11 + _BV( 6 ) , // PB 6 ** 12 ** PWM12 + _BV( 7 ) , // PB 7 ** 13 ** PWM13 + _BV( 1 ) , // PJ 1 ** 14 ** USART3_TX + _BV( 0 ) , // PJ 0 ** 15 ** USART3_RX + _BV( 1 ) , // PH 1 ** 16 ** USART2_TX + _BV( 0 ) , // PH 0 ** 17 ** USART2_RX + _BV( 3 ) , // PD 3 ** 18 ** USART1_TX + _BV( 2 ) , // PD 2 ** 19 ** USART1_RX + _BV( 1 ) , // PD 1 ** 20 ** I2C_SDA + _BV( 0 ) , // PD 0 ** 21 ** I2C_SCL + _BV( 0 ) , // PA 0 ** 22 ** D22 + _BV( 1 ) , // PA 1 ** 23 ** D23 + _BV( 2 ) , // PA 2 ** 24 ** D24 + _BV( 3 ) , // PA 3 ** 25 ** D25 + _BV( 4 ) , // PA 4 ** 26 ** D26 + _BV( 5 ) , // PA 5 ** 27 ** D27 + _BV( 6 ) , // PA 6 ** 28 ** D28 + _BV( 7 ) , // PA 7 ** 29 ** D29 + _BV( 7 ) , // PC 7 ** 30 ** D30 + _BV( 6 ) , // PC 6 ** 31 ** D31 + _BV( 5 ) , // PC 5 ** 32 ** D32 + _BV( 4 ) , // PC 4 ** 33 ** D33 + _BV( 3 ) , // PC 3 ** 34 ** D34 + _BV( 2 ) , // PC 2 ** 35 ** D35 + _BV( 1 ) , // PC 1 ** 36 ** D36 + _BV( 0 ) , // PC 0 ** 37 ** D37 + _BV( 7 ) , // PD 7 ** 38 ** D38 + _BV( 2 ) , // PG 2 ** 39 ** D39 + _BV( 1 ) , // PG 1 ** 40 ** D40 + _BV( 0 ) , // PG 0 ** 41 ** D41 + _BV( 7 ) , // PL 7 ** 42 ** D42 + _BV( 6 ) , // PL 6 ** 43 ** D43 + _BV( 5 ) , // PL 5 ** 44 ** D44 + _BV( 4 ) , // PL 4 ** 45 ** D45 + _BV( 3 ) , // PL 3 ** 46 ** D46 + _BV( 2 ) , // PL 2 ** 47 ** D47 + _BV( 1 ) , // PL 1 ** 48 ** D48 + _BV( 0 ) , // PL 0 ** 49 ** D49 + _BV( 3 ) , // PB 3 ** 50 ** SPI_MISO + _BV( 2 ) , // PB 2 ** 51 ** SPI_MOSI + _BV( 1 ) , // PB 1 ** 52 ** SPI_SCK + _BV( 0 ) , // PB 0 ** 53 ** SPI_SS + _BV( 0 ) , // PF 0 ** 54 ** A0 + _BV( 1 ) , // PF 1 ** 55 ** A1 + _BV( 2 ) , // PF 2 ** 56 ** A2 + _BV( 3 ) , // PF 3 ** 57 ** A3 + _BV( 4 ) , // PF 4 ** 58 ** A4 + _BV( 5 ) , // PF 5 ** 59 ** A5 + _BV( 6 ) , // PF 6 ** 60 ** A6 + _BV( 7 ) , // PF 7 ** 61 ** A7 + _BV( 0 ) , // PK 0 ** 62 ** A8 + _BV( 1 ) , // PK 1 ** 63 ** A9 + _BV( 2 ) , // PK 2 ** 64 ** A10 + _BV( 3 ) , // PK 3 ** 65 ** A11 + _BV( 4 ) , // PK 4 ** 66 ** A12 + _BV( 5 ) , // PK 5 ** 67 ** A13 + _BV( 6 ) , // PK 6 ** 68 ** A14 + _BV( 7 ) , // PK 7 ** 69 ** A15 +}; + +const uint8_t PROGMEM digital_pin_to_timer_PGM[] = { + // TIMERS + // ------------------------------------------- + NOT_ON_TIMER , // PE 0 ** 0 ** USART0_RX + NOT_ON_TIMER , // PE 1 ** 1 ** USART0_TX + TIMER3B , // PE 4 ** 2 ** PWM2 + TIMER3C , // PE 5 ** 3 ** PWM3 + TIMER0B , // PG 5 ** 4 ** PWM4 + TIMER3A , // PE 3 ** 5 ** PWM5 + TIMER4A , // PH 3 ** 6 ** PWM6 + TIMER4B , // PH 4 ** 7 ** PWM7 + TIMER4C , // PH 5 ** 8 ** PWM8 + TIMER2B , // PH 6 ** 9 ** PWM9 + TIMER2A , // PB 4 ** 10 ** PWM10 + TIMER1A , // PB 5 ** 11 ** PWM11 + TIMER1B , // PB 6 ** 12 ** PWM12 + TIMER0A , // PB 7 ** 13 ** PWM13 + NOT_ON_TIMER , // PJ 1 ** 14 ** USART3_TX + NOT_ON_TIMER , // PJ 0 ** 15 ** USART3_RX + NOT_ON_TIMER , // PH 1 ** 16 ** USART2_TX + NOT_ON_TIMER , // PH 0 ** 17 ** USART2_RX + NOT_ON_TIMER , // PD 3 ** 18 ** USART1_TX + NOT_ON_TIMER , // PD 2 ** 19 ** USART1_RX + NOT_ON_TIMER , // PD 1 ** 20 ** I2C_SDA + NOT_ON_TIMER , // PD 0 ** 21 ** I2C_SCL + NOT_ON_TIMER , // PA 0 ** 22 ** D22 + NOT_ON_TIMER , // PA 1 ** 23 ** D23 + NOT_ON_TIMER , // PA 2 ** 24 ** D24 + NOT_ON_TIMER , // PA 3 ** 25 ** D25 + NOT_ON_TIMER , // PA 4 ** 26 ** D26 + NOT_ON_TIMER , // PA 5 ** 27 ** D27 + NOT_ON_TIMER , // PA 6 ** 28 ** D28 + NOT_ON_TIMER , // PA 7 ** 29 ** D29 + NOT_ON_TIMER , // PC 7 ** 30 ** D30 + NOT_ON_TIMER , // PC 6 ** 31 ** D31 + NOT_ON_TIMER , // PC 5 ** 32 ** D32 + NOT_ON_TIMER , // PC 4 ** 33 ** D33 + NOT_ON_TIMER , // PC 3 ** 34 ** D34 + NOT_ON_TIMER , // PC 2 ** 35 ** D35 + NOT_ON_TIMER , // PC 1 ** 36 ** D36 + NOT_ON_TIMER , // PC 0 ** 37 ** D37 + NOT_ON_TIMER , // PD 7 ** 38 ** D38 + NOT_ON_TIMER , // PG 2 ** 39 ** D39 + NOT_ON_TIMER , // PG 1 ** 40 ** D40 + NOT_ON_TIMER , // PG 0 ** 41 ** D41 + NOT_ON_TIMER , // PL 7 ** 42 ** D42 + NOT_ON_TIMER , // PL 6 ** 43 ** D43 + TIMER5C , // PL 5 ** 44 ** D44 + TIMER5B , // PL 4 ** 45 ** D45 + TIMER5A , // PL 3 ** 46 ** D46 + NOT_ON_TIMER , // PL 2 ** 47 ** D47 + NOT_ON_TIMER , // PL 1 ** 48 ** D48 + NOT_ON_TIMER , // PL 0 ** 49 ** D49 + NOT_ON_TIMER , // PB 3 ** 50 ** SPI_MISO + NOT_ON_TIMER , // PB 2 ** 51 ** SPI_MOSI + NOT_ON_TIMER , // PB 1 ** 52 ** SPI_SCK + NOT_ON_TIMER , // PB 0 ** 53 ** SPI_SS + NOT_ON_TIMER , // PF 0 ** 54 ** A0 + NOT_ON_TIMER , // PF 1 ** 55 ** A1 + NOT_ON_TIMER , // PF 2 ** 56 ** A2 + NOT_ON_TIMER , // PF 3 ** 57 ** A3 + NOT_ON_TIMER , // PF 4 ** 58 ** A4 + NOT_ON_TIMER , // PF 5 ** 59 ** A5 + NOT_ON_TIMER , // PF 6 ** 60 ** A6 + NOT_ON_TIMER , // PF 7 ** 61 ** A7 + NOT_ON_TIMER , // PK 0 ** 62 ** A8 + NOT_ON_TIMER , // PK 1 ** 63 ** A9 + NOT_ON_TIMER , // PK 2 ** 64 ** A10 + NOT_ON_TIMER , // PK 3 ** 65 ** A11 + NOT_ON_TIMER , // PK 4 ** 66 ** A12 + NOT_ON_TIMER , // PK 5 ** 67 ** A13 + NOT_ON_TIMER , // PK 6 ** 68 ** A14 + NOT_ON_TIMER , // PK 7 ** 69 ** A15 +}; +#else +// these arrays map port names (e.g. port B) to the +// appropriate addresses for various functions (e.g. reading +// and writing) +const uint16_t PROGMEM port_to_mode_PGM[] = { + NOT_A_PORT, + NOT_A_PORT, + &DDRB, + &DDRC, + &DDRD, +}; + +const uint16_t PROGMEM port_to_output_PGM[] = { + NOT_A_PORT, + NOT_A_PORT, + &PORTB, + &PORTC, + &PORTD, +}; + +const uint16_t PROGMEM port_to_input_PGM[] = { + NOT_A_PORT, + NOT_A_PORT, + &PINB, + &PINC, + &PIND, +}; + +const uint8_t PROGMEM digital_pin_to_port_PGM[] = { + PD, /* 0 */ + PD, + PD, + PD, + PD, + PD, + PD, + PD, + PB, /* 8 */ + PB, + PB, + PB, + PB, + PB, + PC, /* 14 */ + PC, + PC, + PC, + PC, + PC, +}; + +const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = { + _BV(0), /* 0, port D */ + _BV(1), + _BV(2), + _BV(3), + _BV(4), + _BV(5), + _BV(6), + _BV(7), + _BV(0), /* 8, port B */ + _BV(1), + _BV(2), + _BV(3), + _BV(4), + _BV(5), + _BV(0), /* 14, port C */ + _BV(1), + _BV(2), + _BV(3), + _BV(4), + _BV(5), +}; + +const uint8_t PROGMEM digital_pin_to_timer_PGM[] = { + NOT_ON_TIMER, /* 0 - port D */ + NOT_ON_TIMER, + NOT_ON_TIMER, + // on the ATmega168, digital pin 3 has hardware pwm +#if defined(__AVR_ATmega8__) + NOT_ON_TIMER, +#else + TIMER2B, +#endif + NOT_ON_TIMER, + // on the ATmega168, digital pins 5 and 6 have hardware pwm +#if defined(__AVR_ATmega8__) + NOT_ON_TIMER, + NOT_ON_TIMER, +#else + TIMER0B, + TIMER0A, +#endif + NOT_ON_TIMER, + NOT_ON_TIMER, /* 8 - port B */ + TIMER1A, + TIMER1B, +#if defined(__AVR_ATmega8__) + TIMER2, +#else + TIMER2A, +#endif + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, /* 14 - port C */ + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, +}; +#endif diff --git a/test/ardmake/hardware/cores/arduino/pins_arduino.d b/test/ardmake/hardware/cores/arduino/pins_arduino.d new file mode 100644 index 0000000..aef7639 --- /dev/null +++ b/test/ardmake/hardware/cores/arduino/pins_arduino.d @@ -0,0 +1,24 @@ +ardmake/hardware/cores/arduino/pins_arduino.o ardmake/hardware/cores/arduino/pins_arduino.d: ardmake/hardware/cores/arduino/pins_arduino.c \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/io.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/sfr_defs.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/inttypes.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/stdint.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/iom328p.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/portpins.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/common.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/version.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/fuse.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/lock.h \ + ardmake/hardware/cores/arduino/wiring_private.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/interrupt.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/delay.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/util/delay.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/util/delay_basic.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/stdio.h \ + /usr/lib/gcc/avr/4.3.5/include/stdarg.h \ + /usr/lib/gcc/avr/4.3.5/include/stddef.h \ + ardmake/hardware/cores/arduino/wiring.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/stdlib.h \ + ardmake/hardware/cores/arduino/binary.h \ + ardmake/hardware/cores/arduino/pins_arduino.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/pgmspace.h diff --git a/test/ardmake/hardware/cores/arduino/pins_arduino.h b/test/ardmake/hardware/cores/arduino/pins_arduino.h new file mode 100644 index 0000000..bc931c5 --- /dev/null +++ b/test/ardmake/hardware/cores/arduino/pins_arduino.h @@ -0,0 +1,88 @@ +/* + pins_arduino.h - Pin definition functions for Arduino + Part of Arduino - http://www.arduino.cc/ + + Copyright (c) 2007 David A. Mellis + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + $Id: wiring.h 249 2007-02-03 16:52:51Z mellis $ +*/ + +#ifndef Pins_Arduino_h +#define Pins_Arduino_h + +#include + +#define NOT_A_PIN 0 +#define NOT_A_PORT 0 + +#define NOT_ON_TIMER 0 +#define TIMER0A 1 +#define TIMER0B 2 +#define TIMER1A 3 +#define TIMER1B 4 +#define TIMER2 5 +#define TIMER2A 6 +#define TIMER2B 7 + +#define TIMER3A 8 +#define TIMER3B 9 +#define TIMER3C 10 +#define TIMER4A 11 +#define TIMER4B 12 +#define TIMER4C 13 +#define TIMER5A 14 +#define TIMER5B 15 +#define TIMER5C 16 + +#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) +const static uint8_t SS = 53; +const static uint8_t MOSI = 51; +const static uint8_t MISO = 50; +const static uint8_t SCK = 52; +#else +const static uint8_t SS = 10; +const static uint8_t MOSI = 11; +const static uint8_t MISO = 12; +const static uint8_t SCK = 13; +#endif + +// On the ATmega1280, the addresses of some of the port registers are +// greater than 255, so we can't store them in uint8_t's. +extern const uint16_t PROGMEM port_to_mode_PGM[]; +extern const uint16_t PROGMEM port_to_input_PGM[]; +extern const uint16_t PROGMEM port_to_output_PGM[]; + +extern const uint8_t PROGMEM digital_pin_to_port_PGM[]; +// extern const uint8_t PROGMEM digital_pin_to_bit_PGM[]; +extern const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[]; +extern const uint8_t PROGMEM digital_pin_to_timer_PGM[]; + +// Get the bit location within the hardware port of the given virtual pin. +// This comes from the pins_*.c file for the active board configuration. +// +// These perform slightly better as macros compared to inline functions +// +#define digitalPinToPort(P) ( pgm_read_byte( digital_pin_to_port_PGM + (P) ) ) +#define digitalPinToBitMask(P) ( pgm_read_byte( digital_pin_to_bit_mask_PGM + (P) ) ) +#define digitalPinToTimer(P) ( pgm_read_byte( digital_pin_to_timer_PGM + (P) ) ) +#define analogInPinToBit(P) (P) +#define portOutputRegister(P) ( (volatile uint8_t *)( pgm_read_word( port_to_output_PGM + (P))) ) +#define portInputRegister(P) ( (volatile uint8_t *)( pgm_read_word( port_to_input_PGM + (P))) ) +#define portModeRegister(P) ( (volatile uint8_t *)( pgm_read_word( port_to_mode_PGM + (P))) ) + +#endif diff --git a/test/ardmake/hardware/cores/arduino/wiring.c b/test/ardmake/hardware/cores/arduino/wiring.c new file mode 100644 index 0000000..b90d07e --- /dev/null +++ b/test/ardmake/hardware/cores/arduino/wiring.c @@ -0,0 +1,289 @@ +/* + wiring.c - Partial implementation of the Wiring API for the ATmega8. + Part of Arduino - http://www.arduino.cc/ + + Copyright (c) 2005-2006 David A. Mellis + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + $Id$ +*/ + +#include "wiring_private.h" + +// the prescaler is set so that timer0 ticks every 64 clock cycles, and the +// the overflow handler is called every 256 ticks. +#define MICROSECONDS_PER_TIMER0_OVERFLOW (clockCyclesToMicroseconds(64 * 256)) + +// the whole number of milliseconds per timer0 overflow +#define MILLIS_INC (MICROSECONDS_PER_TIMER0_OVERFLOW / 1000) + +// the fractional number of milliseconds per timer0 overflow. we shift right +// by three to fit these numbers into a byte. (for the clock speeds we care +// about - 8 and 16 MHz - this doesn't lose precision.) +#define FRACT_INC ((MICROSECONDS_PER_TIMER0_OVERFLOW % 1000) >> 3) +#define FRACT_MAX (1000 >> 3) + +volatile unsigned long timer0_overflow_count = 0; +volatile unsigned long timer0_millis = 0; +static unsigned char timer0_fract = 0; + +SIGNAL(TIMER0_OVF_vect) +{ + // copy these to local variables so they can be stored in registers + // (volatile variables must be read from memory on every access) + unsigned long m = timer0_millis; + unsigned char f = timer0_fract; + + m += MILLIS_INC; + f += FRACT_INC; + if (f >= FRACT_MAX) { + f -= FRACT_MAX; + m += 1; + } + + timer0_fract = f; + timer0_millis = m; + timer0_overflow_count++; +} + +unsigned long millis() +{ + unsigned long m; + uint8_t oldSREG = SREG; + + // disable interrupts while we read timer0_millis or we might get an + // inconsistent value (e.g. in the middle of a write to timer0_millis) + cli(); + m = timer0_millis; + SREG = oldSREG; + + return m; +} + +unsigned long micros() { + unsigned long m; + uint8_t oldSREG = SREG, t; + + cli(); + m = timer0_overflow_count; +#if defined(TCNT0) + t = TCNT0; +#elif defined(TCNT0L) + t = TCNT0L; +#else + #error TIMER 0 not defined +#endif + + +#ifdef TIFR0 + if ((TIFR0 & _BV(TOV0)) && (t < 255)) + m++; +#else + if ((TIFR & _BV(TOV0)) && (t < 255)) + m++; +#endif + + SREG = oldSREG; + + return ((m << 8) + t) * (64 / clockCyclesPerMicrosecond()); +} + +void delay(unsigned long ms) +{ + uint16_t start = (uint16_t)micros(); + + while (ms > 0) { + if (((uint16_t)micros() - start) >= 1000) { + ms--; + start += 1000; + } + } +} + +/* Delay for the given number of microseconds. Assumes a 8 or 16 MHz clock. */ +void delayMicroseconds(unsigned int us) +{ + // calling avrlib's delay_us() function with low values (e.g. 1 or + // 2 microseconds) gives delays longer than desired. + //delay_us(us); + +#if F_CPU >= 16000000L + // for the 16 MHz clock on most Arduino boards + + // for a one-microsecond delay, simply return. the overhead + // of the function call yields a delay of approximately 1 1/8 us. + if (--us == 0) + return; + + // the following loop takes a quarter of a microsecond (4 cycles) + // per iteration, so execute it four times for each microsecond of + // delay requested. + us <<= 2; + + // account for the time taken in the preceeding commands. + us -= 2; +#else + // for the 8 MHz internal clock on the ATmega168 + + // for a one- or two-microsecond delay, simply return. the overhead of + // the function calls takes more than two microseconds. can't just + // subtract two, since us is unsigned; we'd overflow. + if (--us == 0) + return; + if (--us == 0) + return; + + // the following loop takes half of a microsecond (4 cycles) + // per iteration, so execute it twice for each microsecond of + // delay requested. + us <<= 1; + + // partially compensate for the time taken by the preceeding commands. + // we can't subtract any more than this or we'd overflow w/ small delays. + us--; +#endif + + // busy wait + __asm__ __volatile__ ( + "1: sbiw %0,1" "\n\t" // 2 cycles + "brne 1b" : "=w" (us) : "0" (us) // 2 cycles + ); +} + +void init() +{ + // this needs to be called before setup() or some functions won't + // work there + sei(); + + // on the ATmega168, timer 0 is also used for fast hardware pwm + // (using phase-correct PWM would mean that timer 0 overflowed half as often + // resulting in different millis() behavior on the ATmega8 and ATmega168) +#if defined(TCCR0A) && defined(WGM01) + sbi(TCCR0A, WGM01); + sbi(TCCR0A, WGM00); +#endif + + // set timer 0 prescale factor to 64 +#if defined(__AVR_ATmega128__) + // CPU specific: different values for the ATmega128 + sbi(TCCR0, CS02); +#elif defined(TCCR0) && defined(CS01) && defined(CS00) + // this combination is for the standard atmega8 + sbi(TCCR0, CS01); + sbi(TCCR0, CS00); +#elif defined(TCCR0B) && defined(CS01) && defined(CS00) + // this combination is for the standard 168/328/1280/2560 + sbi(TCCR0B, CS01); + sbi(TCCR0B, CS00); +#elif defined(TCCR0A) && defined(CS01) && defined(CS00) + // this combination is for the __AVR_ATmega645__ series + sbi(TCCR0A, CS01); + sbi(TCCR0A, CS00); +#else + #error Timer 0 prescale factor 64 not set correctly +#endif + + // enable timer 0 overflow interrupt +#if defined(TIMSK) && defined(TOIE0) + sbi(TIMSK, TOIE0); +#elif defined(TIMSK0) && defined(TOIE0) + sbi(TIMSK0, TOIE0); +#else + #error Timer 0 overflow interrupt not set correctly +#endif + + // timers 1 and 2 are used for phase-correct hardware pwm + // this is better for motors as it ensures an even waveform + // note, however, that fast pwm mode can achieve a frequency of up + // 8 MHz (with a 16 MHz clock) at 50% duty cycle + + TCCR1B = 0; + + // set timer 1 prescale factor to 64 +#if defined(TCCR1B) && defined(CS11) && defined(CS10) + sbi(TCCR1B, CS11); + sbi(TCCR1B, CS10); +#elif defined(TCCR1) && defined(CS11) && defined(CS10) + sbi(TCCR1, CS11); + sbi(TCCR1, CS10); +#endif + // put timer 1 in 8-bit phase correct pwm mode +#if defined(TCCR1A) && defined(WGM10) + sbi(TCCR1A, WGM10); +#elif defined(TCCR1) + #warning this needs to be finished +#endif + + // set timer 2 prescale factor to 64 +#if defined(TCCR2) && defined(CS22) + sbi(TCCR2, CS22); +#elif defined(TCCR2B) && defined(CS22) + sbi(TCCR2B, CS22); +#else + #warning Timer 2 not finished (may not be present on this CPU) +#endif + + // configure timer 2 for phase correct pwm (8-bit) +#if defined(TCCR2) && defined(WGM20) + sbi(TCCR2, WGM20); +#elif defined(TCCR2A) && defined(WGM20) + sbi(TCCR2A, WGM20); +#else + #warning Timer 2 not finished (may not be present on this CPU) +#endif + +#if defined(TCCR3B) && defined(CS31) && defined(WGM30) + sbi(TCCR3B, CS31); // set timer 3 prescale factor to 64 + sbi(TCCR3B, CS30); + sbi(TCCR3A, WGM30); // put timer 3 in 8-bit phase correct pwm mode +#endif + +#if defined(TCCR4B) && defined(CS41) && defined(WGM40) + sbi(TCCR4B, CS41); // set timer 4 prescale factor to 64 + sbi(TCCR4B, CS40); + sbi(TCCR4A, WGM40); // put timer 4 in 8-bit phase correct pwm mode +#endif + +#if defined(TCCR5B) && defined(CS51) && defined(WGM50) + sbi(TCCR5B, CS51); // set timer 5 prescale factor to 64 + sbi(TCCR5B, CS50); + sbi(TCCR5A, WGM50); // put timer 5 in 8-bit phase correct pwm mode +#endif + +#if defined(ADCSRA) + // set a2d prescale factor to 128 + // 16 MHz / 128 = 125 KHz, inside the desired 50-200 KHz range. + // XXX: this will not work properly for other clock speeds, and + // this code should use F_CPU to determine the prescale factor. + sbi(ADCSRA, ADPS2); + sbi(ADCSRA, ADPS1); + sbi(ADCSRA, ADPS0); + + // enable a2d conversions + sbi(ADCSRA, ADEN); +#endif + + // the bootloader connects pins 0 and 1 to the USART; disconnect them + // here so they can be used as normal digital i/o; they will be + // reconnected in Serial.begin() +#if defined(UCSRB) + UCSRB = 0; +#elif defined(UCSR0B) + UCSR0B = 0; +#endif +} diff --git a/test/ardmake/hardware/cores/arduino/wiring.d b/test/ardmake/hardware/cores/arduino/wiring.d new file mode 100644 index 0000000..ea1b80f --- /dev/null +++ b/test/ardmake/hardware/cores/arduino/wiring.d @@ -0,0 +1,22 @@ +ardmake/hardware/cores/arduino/wiring.o ardmake/hardware/cores/arduino/wiring.d: ardmake/hardware/cores/arduino/wiring.c \ + ardmake/hardware/cores/arduino/wiring_private.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/io.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/sfr_defs.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/inttypes.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/stdint.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/iom328p.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/portpins.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/common.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/version.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/fuse.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/lock.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/interrupt.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/delay.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/util/delay.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/util/delay_basic.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/stdio.h \ + /usr/lib/gcc/avr/4.3.5/include/stdarg.h \ + /usr/lib/gcc/avr/4.3.5/include/stddef.h \ + ardmake/hardware/cores/arduino/wiring.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/stdlib.h \ + ardmake/hardware/cores/arduino/binary.h diff --git a/test/ardmake/hardware/cores/arduino/wiring.h b/test/ardmake/hardware/cores/arduino/wiring.h new file mode 100644 index 0000000..e29959b --- /dev/null +++ b/test/ardmake/hardware/cores/arduino/wiring.h @@ -0,0 +1,135 @@ +/* + wiring.h - Partial implementation of the Wiring API for the ATmega8. + Part of Arduino - http://www.arduino.cc/ + + Copyright (c) 2005-2006 David A. Mellis + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + $Id$ +*/ + +#ifndef Wiring_h +#define Wiring_h + +#include +#include +#include "binary.h" + +#ifdef __cplusplus +extern "C"{ +#endif + +#define HIGH 0x1 +#define LOW 0x0 + +#define INPUT 0x0 +#define OUTPUT 0x1 + +#define true 0x1 +#define false 0x0 + +#define PI 3.1415926535897932384626433832795 +#define HALF_PI 1.5707963267948966192313216916398 +#define TWO_PI 6.283185307179586476925286766559 +#define DEG_TO_RAD 0.017453292519943295769236907684886 +#define RAD_TO_DEG 57.295779513082320876798154814105 + +#define SERIAL 0x0 +#define DISPLAY 0x1 + +#define LSBFIRST 0 +#define MSBFIRST 1 + +#define CHANGE 1 +#define FALLING 2 +#define RISING 3 + +#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) +#define INTERNAL1V1 2 +#define INTERNAL2V56 3 +#else +#define INTERNAL 3 +#endif +#define DEFAULT 1 +#define EXTERNAL 0 + +// undefine stdlib's abs if encountered +#ifdef abs +#undef abs +#endif + +#define min(a,b) ((a)<(b)?(a):(b)) +#define max(a,b) ((a)>(b)?(a):(b)) +#define abs(x) ((x)>0?(x):-(x)) +#define constrain(amt,low,high) ((amt)<(low)?(low):((amt)>(high)?(high):(amt))) +#define round(x) ((x)>=0?(long)((x)+0.5):(long)((x)-0.5)) +#define radians(deg) ((deg)*DEG_TO_RAD) +#define degrees(rad) ((rad)*RAD_TO_DEG) +#define sq(x) ((x)*(x)) + +#define interrupts() sei() +#define noInterrupts() cli() + +#define clockCyclesPerMicrosecond() ( F_CPU / 1000000L ) +#define clockCyclesToMicroseconds(a) ( ((a) * 1000L) / (F_CPU / 1000L) ) +#define microsecondsToClockCycles(a) ( ((a) * (F_CPU / 1000L)) / 1000L ) + +#define lowByte(w) ((uint8_t) ((w) & 0xff)) +#define highByte(w) ((uint8_t) ((w) >> 8)) + +#define bitRead(value, bit) (((value) >> (bit)) & 0x01) +#define bitSet(value, bit) ((value) |= (1UL << (bit))) +#define bitClear(value, bit) ((value) &= ~(1UL << (bit))) +#define bitWrite(value, bit, bitvalue) (bitvalue ? bitSet(value, bit) : bitClear(value, bit)) + + +typedef unsigned int word; + +#define bit(b) (1UL << (b)) + +typedef uint8_t boolean; +typedef uint8_t byte; + +void init(void); + +void pinMode(uint8_t, uint8_t); +void digitalWrite(uint8_t, uint8_t); +int digitalRead(uint8_t); +int analogRead(uint8_t); +void analogReference(uint8_t mode); +void analogWrite(uint8_t, int); + +unsigned long millis(void); +unsigned long micros(void); +void delay(unsigned long); +void delayMicroseconds(unsigned int us); +unsigned long pulseIn(uint8_t pin, uint8_t state, unsigned long timeout); + +void shiftOut(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder, uint8_t val); +uint8_t shiftIn(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder); + +void attachInterrupt(uint8_t, void (*)(void), int mode); +void detachInterrupt(uint8_t); + +void setup(void); +void loop(void); + +#ifdef __cplusplus +} // extern "C" +#endif + +#endif diff --git a/test/ardmake/hardware/cores/arduino/wiring_analog.c b/test/ardmake/hardware/cores/arduino/wiring_analog.c new file mode 100644 index 0000000..d248f4c --- /dev/null +++ b/test/ardmake/hardware/cores/arduino/wiring_analog.c @@ -0,0 +1,259 @@ +/* + wiring_analog.c - analog input and output + Part of Arduino - http://www.arduino.cc/ + + Copyright (c) 2005-2006 David A. Mellis + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + Modified 28 September 2010 by Mark Sproul + + $Id: wiring.c 248 2007-02-03 15:36:30Z mellis $ +*/ + +#include "wiring_private.h" +#include "pins_arduino.h" + +uint8_t analog_reference = DEFAULT; + +void analogReference(uint8_t mode) +{ + // can't actually set the register here because the default setting + // will connect AVCC and the AREF pin, which would cause a short if + // there's something connected to AREF. + analog_reference = mode; +} + +int analogRead(uint8_t pin) +{ + uint8_t low, high; + +#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) + if (pin >= 54) pin -= 54; // allow for channel or pin numbers +#else + if (pin >= 14) pin -= 14; // allow for channel or pin numbers +#endif + +#if defined(ADCSRB) && defined(MUX5) + // the MUX5 bit of ADCSRB selects whether we're reading from channels + // 0 to 7 (MUX5 low) or 8 to 15 (MUX5 high). + ADCSRB = (ADCSRB & ~(1 << MUX5)) | (((pin >> 3) & 0x01) << MUX5); +#endif + + // set the analog reference (high two bits of ADMUX) and select the + // channel (low 4 bits). this also sets ADLAR (left-adjust result) + // to 0 (the default). +#if defined(ADMUX) + ADMUX = (analog_reference << 6) | (pin & 0x07); +#endif + + // without a delay, we seem to read from the wrong channel + //delay(1); + +#if defined(ADCSRA) && defined(ADCL) + // start the conversion + sbi(ADCSRA, ADSC); + + // ADSC is cleared when the conversion finishes + while (bit_is_set(ADCSRA, ADSC)); + + // we have to read ADCL first; doing so locks both ADCL + // and ADCH until ADCH is read. reading ADCL second would + // cause the results of each conversion to be discarded, + // as ADCL and ADCH would be locked when it completed. + low = ADCL; + high = ADCH; +#else + // we dont have an ADC, return 0 + low = 0; + high = 0; +#endif + + // combine the two bytes + return (high << 8) | low; +} + +// Right now, PWM output only works on the pins with +// hardware support. These are defined in the appropriate +// pins_*.c file. For the rest of the pins, we default +// to digital output. +void analogWrite(uint8_t pin, int val) +{ + // We need to make sure the PWM output is enabled for those pins + // that support it, as we turn it off when digitally reading or + // writing with them. Also, make sure the pin is in output mode + // for consistenty with Wiring, which doesn't require a pinMode + // call for the analog output pins. + pinMode(pin, OUTPUT); + if (val == 0) + { + digitalWrite(pin, LOW); + } + else if (val == 255) + { + digitalWrite(pin, HIGH); + } + else + { + switch(digitalPinToTimer(pin)) + { + // XXX fix needed for atmega8 + #if defined(TCCR0) && defined(COM00) && !defined(__AVR_ATmega8__) + case TIMER0A: + // connect pwm to pin on timer 0 + sbi(TCCR0, COM00); + OCR0 = val; // set pwm duty + break; + #endif + + #if defined(TCCR0A) && defined(COM0A1) + case TIMER0A: + // connect pwm to pin on timer 0, channel A + sbi(TCCR0A, COM0A1); + OCR0A = val; // set pwm duty + break; + #endif + + #if defined(TCCR0A) && defined(COM0B1) + case TIMER0B: + // connect pwm to pin on timer 0, channel B + sbi(TCCR0A, COM0B1); + OCR0B = val; // set pwm duty + break; + #endif + + #if defined(TCCR1A) && defined(COM1A1) + case TIMER1A: + // connect pwm to pin on timer 1, channel A + sbi(TCCR1A, COM1A1); + OCR1A = val; // set pwm duty + break; + #endif + + #if defined(TCCR1A) && defined(COM1B1) + case TIMER1B: + // connect pwm to pin on timer 1, channel B + sbi(TCCR1A, COM1B1); + OCR1B = val; // set pwm duty + break; + #endif + + #if defined(TCCR2) && defined(COM21) + case TIMER2: + // connect pwm to pin on timer 2 + sbi(TCCR2, COM21); + OCR2 = val; // set pwm duty + break; + #endif + + #if defined(TCCR2A) && defined(COM2A1) + case TIMER2A: + // connect pwm to pin on timer 2, channel A + sbi(TCCR2A, COM2A1); + OCR2A = val; // set pwm duty + break; + #endif + + #if defined(TCCR2A) && defined(COM2B1) + case TIMER2B: + // connect pwm to pin on timer 2, channel B + sbi(TCCR2A, COM2B1); + OCR2B = val; // set pwm duty + break; + #endif + + #if defined(TCCR3A) && defined(COM3A1) + case TIMER3A: + // connect pwm to pin on timer 3, channel A + sbi(TCCR3A, COM3A1); + OCR3A = val; // set pwm duty + break; + #endif + + #if defined(TCCR3A) && defined(COM3B1) + case TIMER3B: + // connect pwm to pin on timer 3, channel B + sbi(TCCR3A, COM3B1); + OCR3B = val; // set pwm duty + break; + #endif + + #if defined(TCCR3A) && defined(COM3C1) + case TIMER3C: + // connect pwm to pin on timer 3, channel C + sbi(TCCR3A, COM3C1); + OCR3C = val; // set pwm duty + break; + #endif + + #if defined(TCCR4A) && defined(COM4A1) + case TIMER4A: + // connect pwm to pin on timer 4, channel A + sbi(TCCR4A, COM4A1); + OCR4A = val; // set pwm duty + break; + #endif + + #if defined(TCCR4A) && defined(COM4B1) + case TIMER4B: + // connect pwm to pin on timer 4, channel B + sbi(TCCR4A, COM4B1); + OCR4B = val; // set pwm duty + break; + #endif + + #if defined(TCCR4A) && defined(COM4C1) + case TIMER4C: + // connect pwm to pin on timer 4, channel C + sbi(TCCR4A, COM4C1); + OCR4C = val; // set pwm duty + break; + #endif + + #if defined(TCCR5A) && defined(COM5A1) + case TIMER5A: + // connect pwm to pin on timer 5, channel A + sbi(TCCR5A, COM5A1); + OCR5A = val; // set pwm duty + break; + #endif + + #if defined(TCCR5A) && defined(COM5B1) + case TIMER5B: + // connect pwm to pin on timer 5, channel B + sbi(TCCR5A, COM5B1); + OCR5B = val; // set pwm duty + break; + #endif + + #if defined(TCCR5A) && defined(COM5C1) + case TIMER5C: + // connect pwm to pin on timer 5, channel C + sbi(TCCR5A, COM5C1); + OCR5C = val; // set pwm duty + break; + #endif + + case NOT_ON_TIMER: + default: + if (val < 128) { + digitalWrite(pin, LOW); + } else { + digitalWrite(pin, HIGH); + } + } + } +} diff --git a/test/ardmake/hardware/cores/arduino/wiring_analog.d b/test/ardmake/hardware/cores/arduino/wiring_analog.d new file mode 100644 index 0000000..43e0c9c --- /dev/null +++ b/test/ardmake/hardware/cores/arduino/wiring_analog.d @@ -0,0 +1,24 @@ +ardmake/hardware/cores/arduino/wiring_analog.o ardmake/hardware/cores/arduino/wiring_analog.d: ardmake/hardware/cores/arduino/wiring_analog.c \ + ardmake/hardware/cores/arduino/wiring_private.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/io.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/sfr_defs.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/inttypes.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/stdint.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/iom328p.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/portpins.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/common.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/version.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/fuse.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/lock.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/interrupt.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/delay.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/util/delay.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/util/delay_basic.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/stdio.h \ + /usr/lib/gcc/avr/4.3.5/include/stdarg.h \ + /usr/lib/gcc/avr/4.3.5/include/stddef.h \ + ardmake/hardware/cores/arduino/wiring.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/stdlib.h \ + ardmake/hardware/cores/arduino/binary.h \ + ardmake/hardware/cores/arduino/pins_arduino.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/pgmspace.h diff --git a/test/ardmake/hardware/cores/arduino/wiring_digital.c b/test/ardmake/hardware/cores/arduino/wiring_digital.c new file mode 100644 index 0000000..0949da4 --- /dev/null +++ b/test/ardmake/hardware/cores/arduino/wiring_digital.c @@ -0,0 +1,166 @@ +/* + wiring_digital.c - digital input and output functions + Part of Arduino - http://www.arduino.cc/ + + Copyright (c) 2005-2006 David A. Mellis + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + Modified 28 September 2010 by Mark Sproul + + $Id: wiring.c 248 2007-02-03 15:36:30Z mellis $ +*/ + +#include "wiring_private.h" +#include "pins_arduino.h" + +void pinMode(uint8_t pin, uint8_t mode) +{ + uint8_t bit = digitalPinToBitMask(pin); + uint8_t port = digitalPinToPort(pin); + volatile uint8_t *reg; + + if (port == NOT_A_PIN) return; + + // JWS: can I let the optimizer do this? + reg = portModeRegister(port); + + if (mode == INPUT) { + uint8_t oldSREG = SREG; + cli(); + *reg &= ~bit; + SREG = oldSREG; + } else { + uint8_t oldSREG = SREG; + cli(); + *reg |= bit; + SREG = oldSREG; + } +} + +// Forcing this inline keeps the callers from having to push their own stuff +// on the stack. It is a good performance win and only takes 1 more byte per +// user than calling. (It will take more bytes on the 168.) +// +// But shouldn't this be moved into pinMode? Seems silly to check and do on +// each digitalread or write. +// +// Mark Sproul: +// - Removed inline. Save 170 bytes on atmega1280 +// - changed to a switch statment; added 32 bytes but much easier to read and maintain. +// - Added more #ifdefs, now compiles for atmega645 +// +//static inline void turnOffPWM(uint8_t timer) __attribute__ ((always_inline)); +//static inline void turnOffPWM(uint8_t timer) +static void turnOffPWM(uint8_t timer) +{ + switch (timer) + { + #if defined(TCCR1A) && defined(COM1A1) + case TIMER1A: cbi(TCCR1A, COM1A1); break; + #endif + #if defined(TCCR1A) && defined(COM1B1) + case TIMER1B: cbi(TCCR1A, COM1B1); break; + #endif + + #if defined(TCCR2) && defined(COM21) + case TIMER2: cbi(TCCR2, COM21); break; + #endif + + #if defined(TCCR0A) && defined(COM0A1) + case TIMER0A: cbi(TCCR0A, COM0A1); break; + #endif + + #if defined(TIMER0B) && defined(COM0B1) + case TIMER0B: cbi(TCCR0A, COM0B1); break; + #endif + #if defined(TCCR2A) && defined(COM2A1) + case TIMER2A: cbi(TCCR2A, COM2A1); break; + #endif + #if defined(TCCR2A) && defined(COM2B1) + case TIMER2B: cbi(TCCR2A, COM2B1); break; + #endif + + #if defined(TCCR3A) && defined(COM3A1) + case TIMER3A: cbi(TCCR3A, COM3A1); break; + #endif + #if defined(TCCR3A) && defined(COM3B1) + case TIMER3B: cbi(TCCR3A, COM3B1); break; + #endif + #if defined(TCCR3A) && defined(COM3C1) + case TIMER3C: cbi(TCCR3A, COM3C1); break; + #endif + + #if defined(TCCR4A) && defined(COM4A1) + case TIMER4A: cbi(TCCR4A, COM4A1); break; + #endif + #if defined(TCCR4A) && defined(COM4B1) + case TIMER4B: cbi(TCCR4A, COM4B1); break; + #endif + #if defined(TCCR4A) && defined(COM4C1) + case TIMER4C: cbi(TCCR4A, COM4C1); break; + #endif + #if defined(TCCR5A) + case TIMER5A: cbi(TCCR5A, COM5A1); break; + case TIMER5B: cbi(TCCR5A, COM5B1); break; + case TIMER5C: cbi(TCCR5A, COM5C1); break; + #endif + } +} + +void digitalWrite(uint8_t pin, uint8_t val) +{ + uint8_t timer = digitalPinToTimer(pin); + uint8_t bit = digitalPinToBitMask(pin); + uint8_t port = digitalPinToPort(pin); + volatile uint8_t *out; + + if (port == NOT_A_PIN) return; + + // If the pin that support PWM output, we need to turn it off + // before doing a digital write. + if (timer != NOT_ON_TIMER) turnOffPWM(timer); + + out = portOutputRegister(port); + + if (val == LOW) { + uint8_t oldSREG = SREG; + cli(); + *out &= ~bit; + SREG = oldSREG; + } else { + uint8_t oldSREG = SREG; + cli(); + *out |= bit; + SREG = oldSREG; + } +} + +int digitalRead(uint8_t pin) +{ + uint8_t timer = digitalPinToTimer(pin); + uint8_t bit = digitalPinToBitMask(pin); + uint8_t port = digitalPinToPort(pin); + + if (port == NOT_A_PIN) return LOW; + + // If the pin that support PWM output, we need to turn it off + // before getting a digital reading. + if (timer != NOT_ON_TIMER) turnOffPWM(timer); + + if (*portInputRegister(port) & bit) return HIGH; + return LOW; +} diff --git a/test/ardmake/hardware/cores/arduino/wiring_digital.d b/test/ardmake/hardware/cores/arduino/wiring_digital.d new file mode 100644 index 0000000..269f2ff --- /dev/null +++ b/test/ardmake/hardware/cores/arduino/wiring_digital.d @@ -0,0 +1,24 @@ +ardmake/hardware/cores/arduino/wiring_digital.o ardmake/hardware/cores/arduino/wiring_digital.d: ardmake/hardware/cores/arduino/wiring_digital.c \ + ardmake/hardware/cores/arduino/wiring_private.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/io.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/sfr_defs.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/inttypes.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/stdint.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/iom328p.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/portpins.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/common.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/version.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/fuse.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/lock.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/interrupt.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/delay.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/util/delay.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/util/delay_basic.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/stdio.h \ + /usr/lib/gcc/avr/4.3.5/include/stdarg.h \ + /usr/lib/gcc/avr/4.3.5/include/stddef.h \ + ardmake/hardware/cores/arduino/wiring.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/stdlib.h \ + ardmake/hardware/cores/arduino/binary.h \ + ardmake/hardware/cores/arduino/pins_arduino.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/pgmspace.h diff --git a/test/ardmake/hardware/cores/arduino/wiring_private.h b/test/ardmake/hardware/cores/arduino/wiring_private.h new file mode 100644 index 0000000..11f6f00 --- /dev/null +++ b/test/ardmake/hardware/cores/arduino/wiring_private.h @@ -0,0 +1,68 @@ +/* + wiring_private.h - Internal header file. + Part of Arduino - http://www.arduino.cc/ + + Copyright (c) 2005-2006 David A. Mellis + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + $Id: wiring.h 239 2007-01-12 17:58:39Z mellis $ +*/ + +#ifndef WiringPrivate_h +#define WiringPrivate_h + +#include +#include +#include +#include +#include + +#include "wiring.h" + +#ifdef __cplusplus +extern "C"{ +#endif + +#ifndef cbi +#define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit)) +#endif +#ifndef sbi +#define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit)) +#endif + +#define EXTERNAL_INT_0 0 +#define EXTERNAL_INT_1 1 +#define EXTERNAL_INT_2 2 +#define EXTERNAL_INT_3 3 +#define EXTERNAL_INT_4 4 +#define EXTERNAL_INT_5 5 +#define EXTERNAL_INT_6 6 +#define EXTERNAL_INT_7 7 + +#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) +#define EXTERNAL_NUM_INTERRUPTS 8 +#else +#define EXTERNAL_NUM_INTERRUPTS 2 +#endif + +typedef void (*voidFuncPtr)(void); + +#ifdef __cplusplus +} // extern "C" +#endif + +#endif diff --git a/test/ardmake/hardware/cores/arduino/wiring_pulse.c b/test/ardmake/hardware/cores/arduino/wiring_pulse.c new file mode 100644 index 0000000..0d96886 --- /dev/null +++ b/test/ardmake/hardware/cores/arduino/wiring_pulse.c @@ -0,0 +1,69 @@ +/* + wiring_pulse.c - pulseIn() function + Part of Arduino - http://www.arduino.cc/ + + Copyright (c) 2005-2006 David A. Mellis + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + $Id: wiring.c 248 2007-02-03 15:36:30Z mellis $ +*/ + +#include "wiring_private.h" +#include "pins_arduino.h" + +/* Measures the length (in microseconds) of a pulse on the pin; state is HIGH + * or LOW, the type of pulse to measure. Works on pulses from 2-3 microseconds + * to 3 minutes in length, but must be called at least a few dozen microseconds + * before the start of the pulse. */ +unsigned long pulseIn(uint8_t pin, uint8_t state, unsigned long timeout) +{ + // cache the port and bit of the pin in order to speed up the + // pulse width measuring loop and achieve finer resolution. calling + // digitalRead() instead yields much coarser resolution. + uint8_t bit = digitalPinToBitMask(pin); + uint8_t port = digitalPinToPort(pin); + uint8_t stateMask = (state ? bit : 0); + unsigned long width = 0; // keep initialization out of time critical area + + // convert the timeout from microseconds to a number of times through + // the initial loop; it takes 16 clock cycles per iteration. + unsigned long numloops = 0; + unsigned long maxloops = microsecondsToClockCycles(timeout) / 16; + + // wait for any previous pulse to end + while ((*portInputRegister(port) & bit) == stateMask) + if (numloops++ == maxloops) + return 0; + + // wait for the pulse to start + while ((*portInputRegister(port) & bit) != stateMask) + if (numloops++ == maxloops) + return 0; + + // wait for the pulse to stop + while ((*portInputRegister(port) & bit) == stateMask) { + if (numloops++ == maxloops) + return 0; + width++; + } + + // convert the reading to microseconds. The loop has been determined + // to be 20 clock cycles long and have about 16 clocks between the edge + // and the start of the loop. There will be some error introduced by + // the interrupt handlers. + return clockCyclesToMicroseconds(width * 21 + 16); +} diff --git a/test/ardmake/hardware/cores/arduino/wiring_pulse.d b/test/ardmake/hardware/cores/arduino/wiring_pulse.d new file mode 100644 index 0000000..da7dd53 --- /dev/null +++ b/test/ardmake/hardware/cores/arduino/wiring_pulse.d @@ -0,0 +1,24 @@ +ardmake/hardware/cores/arduino/wiring_pulse.o ardmake/hardware/cores/arduino/wiring_pulse.d: ardmake/hardware/cores/arduino/wiring_pulse.c \ + ardmake/hardware/cores/arduino/wiring_private.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/io.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/sfr_defs.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/inttypes.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/stdint.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/iom328p.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/portpins.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/common.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/version.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/fuse.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/lock.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/interrupt.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/delay.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/util/delay.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/util/delay_basic.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/stdio.h \ + /usr/lib/gcc/avr/4.3.5/include/stdarg.h \ + /usr/lib/gcc/avr/4.3.5/include/stddef.h \ + ardmake/hardware/cores/arduino/wiring.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/stdlib.h \ + ardmake/hardware/cores/arduino/binary.h \ + ardmake/hardware/cores/arduino/pins_arduino.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/pgmspace.h diff --git a/test/ardmake/hardware/cores/arduino/wiring_shift.c b/test/ardmake/hardware/cores/arduino/wiring_shift.c new file mode 100644 index 0000000..cfe7867 --- /dev/null +++ b/test/ardmake/hardware/cores/arduino/wiring_shift.c @@ -0,0 +1,55 @@ +/* + wiring_shift.c - shiftOut() function + Part of Arduino - http://www.arduino.cc/ + + Copyright (c) 2005-2006 David A. Mellis + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + $Id: wiring.c 248 2007-02-03 15:36:30Z mellis $ +*/ + +#include "wiring_private.h" + +uint8_t shiftIn(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder) { + uint8_t value = 0; + uint8_t i; + + for (i = 0; i < 8; ++i) { + digitalWrite(clockPin, HIGH); + if (bitOrder == LSBFIRST) + value |= digitalRead(dataPin) << i; + else + value |= digitalRead(dataPin) << (7 - i); + digitalWrite(clockPin, LOW); + } + return value; +} + +void shiftOut(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder, uint8_t val) +{ + uint8_t i; + + for (i = 0; i < 8; i++) { + if (bitOrder == LSBFIRST) + digitalWrite(dataPin, !!(val & (1 << i))); + else + digitalWrite(dataPin, !!(val & (1 << (7 - i)))); + + digitalWrite(clockPin, HIGH); + digitalWrite(clockPin, LOW); + } +} diff --git a/test/ardmake/hardware/cores/arduino/wiring_shift.d b/test/ardmake/hardware/cores/arduino/wiring_shift.d new file mode 100644 index 0000000..1186d5b --- /dev/null +++ b/test/ardmake/hardware/cores/arduino/wiring_shift.d @@ -0,0 +1,22 @@ +ardmake/hardware/cores/arduino/wiring_shift.o ardmake/hardware/cores/arduino/wiring_shift.d: ardmake/hardware/cores/arduino/wiring_shift.c \ + ardmake/hardware/cores/arduino/wiring_private.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/io.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/sfr_defs.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/inttypes.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/stdint.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/iom328p.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/portpins.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/common.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/version.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/fuse.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/lock.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/interrupt.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/avr/delay.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/util/delay.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/util/delay_basic.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/stdio.h \ + /usr/lib/gcc/avr/4.3.5/include/stdarg.h \ + /usr/lib/gcc/avr/4.3.5/include/stddef.h \ + ardmake/hardware/cores/arduino/wiring.h \ + /usr/lib/gcc/avr/4.3.5/../../../avr/include/stdlib.h \ + ardmake/hardware/cores/arduino/binary.h diff --git a/test/ardmake/hardware/firmwares/MEGA-dfu_and_usbserial_combined.hex b/test/ardmake/hardware/firmwares/MEGA-dfu_and_usbserial_combined.hex new file mode 100644 index 0000000..e22196c --- /dev/null +++ b/test/ardmake/hardware/firmwares/MEGA-dfu_and_usbserial_combined.hex @@ -0,0 +1,234 @@ +:20000000A2C00000BBC00000B9C00000B7C00000B5C00000B3C00000B1C00000AFC000004B +:20002000ADC00000ABC00000A9C000005AC400001EC40000A3C00000A1C000009FC000005C +:200040009DC000009BC0000099C0000097C0000095C0000093C0000091C0000014C100006A +:200060008DC000008BC0000089C0000087C0000085C0000083C0000081C000007FC0000050 +:200080007DC000007BC0000079C0000077C0000075C0000073C000001201100102000008E2 +:2000A0004123100001000102DC0109023E00020100C0320904000001020201000524000170 +:2000C00010042402060524060001070582030800FF09040100020A000000070504024000AC +:2000E0000107058302400001040309043203410072006400750069006E006F0020002800CA +:200100007700770077002E00610072006400750069006E006F002E0063006300290000003D +:200120002403410072006400750069006E006F0020004D00650067006100200032003500A5 +:2001400036003000000011241FBECFEFD2E0DEBFCDBF11E0A0E0B1E0E0EDFFE002C0059089 +:200160000D92A631B107D9F712E0A6E1B1E001C01D92AF32B107E1F7F1D028C741CF9C0139 +:20018000DC01AE57BF4FED91FC91119741911196FC93EE9380589F4FE817F90711F42D93A9 +:2001A0003C939FB7F894F901EC57FF4F8081815080839FBF842F0895DF92EF92FF920F935B +:2001C0001F93FC018489813019F0823021F405C040E3D42E04C0DD2402C030E2D32E838952 +:2001E000823011F488E0D82A8589873031F0883031F0863031F482E003C084E001C086E094 +:20020000D82A1092C9001092C8001092CA00E784F0880189128980E0E81681EEF80680E068 +:20022000080780E0180719F420E130E00FC0C801B701969587957795679560587B47814E2A +:200240009F4FA8019701A0D6215030403093CD002093CC00D092CA0080E0E81681EEF80612 +:2002600080E0080780E0180711F082E001C080E08093C80088E98093C9001F910F91FF9005 +:20028000EF90DF9008951F920F920FB60F9211242F938F939F93EF93FF939091CE008EB38C +:2002A0008430F1F4E0919901F0919A019083E0919901F0919A01CF01019690939A0180930C +:2002C00099018959914021F489E191E0928381839FB7F89480919D018F5F80939D019FBF3A +:2002E000FF91EF919F918F912F910F900FBE0F901F901895FC01858580FF02C05F9808959B +:200300005F9A089580E091E0D5C580E091E088C584B7877F84BF28E10FB6F89420936000CD +:20032000109260000FBE87E690E09093CD008093CC0086E08093CA001092C8002093C90019 +:20034000539A5A9A8AB180638AB98BB180638BB983D284E085BD5F9A579A08950F931F9322 +:20036000CF93DF93D5DF2FB7F8948EE991E090931F0280931E0290932102809320022FBFBB +:200380002FB7F89489E191E090939A018093990190939C0180939B012FBF7894CEE9D1E0D4 +:2003A00003E08FB7F894909122028FBF903809F180E091E0ABD497FD1CC0E0911E02F09161 +:2003C0001F028083E0911E02F0911F02CF01019690931F0280931E028E51924011F4D283DD +:2003E000C1839FB7F894809122028F5F809322029FBF8FB7F89410919D018FBFA89902C0BD +:20040000113678F1A89A80919D01882361F05D980093160108C089E191E0B1DE682F80E077 +:2004200091E0DAD411501123B1F780911601882351F0809116018150809316018091160101 +:20044000882309F45D9A80911701882351F08091170181508093170180911701882309F4F2 +:200460005C9A8FB7F894909122028FBF992369F08EE991E084DE982F8091C80085FFFCCFD3 +:200480009093CE005C980093170180E091E095D42AD487CFDA01923049F0933061F0913093 +:2004A000F9F4E8E9F0E022E130E01EC0EAEAF0E02EE330E019C0813049F0813018F08230CA +:2004C00079F408C0E8EEF0E0849107C0ECEEF0E0849103C0E0E2F1E08491282F30E004C010 +:2004E000E0E0F0E020E030E0ED93FC93C901089528E030E040E003C04F5F220F331F28177B +:200500003907D0F3842F8295807F08958093E9008091EB0081608093EB001092ED00609319 +:20052000EC004093ED008091EE00881F8827881F08951092F40090E09093E9001092F000D2 +:200540001092E8001092ED008091EB008E7F8093EB009F5F953081F70895809127028823BE +:200560008CF403C08EB38823B1F08091E80082FFF9CF8091E8008B778093E80008958EB395 +:20058000882349F08091E80080FFF9CF8091E8008E778093E800089594E68091EC0080FFAB +:2005A00005C08091E80080FF05C023C08091E80082FD1FC08EB3882311F482E008958EB3CE +:2005C000853011F483E008958091EB0085FF02C081E008958091E10082FFDFCF8091E1000E +:2005E0008B7F8093E100992311F484E008959150D4CF80E008959C0140912D0250912E020C +:200600004617570718F4F90120E038C06115710511F0AB01F8CF8091E8008E778093E800C8 +:2006200040E050E0F0CF8091E80083FF02C081E008958091E80082FD2DC08EB3882381F1AD +:200640008EB3853079F18091E80080FF17C09091F20006C081918093F100415050409F5FDD +:200660004115510511F09830A8F320E0983009F421E08091E8008E778093E80041155105FF +:2006800091F6222381F606C08EB3882349F08EB3853041F08091E80082FFF6CF80E00895C9 +:2006A00082E0089583E008959C0140912D0250912E024617570710F490E03BC06115710577 +:2006C00011F0AB01F9CF8091E8008E778093E80040E050E0F1CF8091E80083FF02C081E0FE +:2006E00008958091E80082FD30C08EB3882399F18EB3853091F18091E80080FF1AC08091A4 +:20070000F20009C0F9012F5F3F4FE491E093F100415050408F5F4115510511F0883090F338 +:2007200090E0883009F491E08091E8008E778093E8004115510579F6992369F606C08EB3ED +:20074000882349F08EB3853041F08091E80082FFF6CF80E0089582E0089583E008959C01B6 +:200760006115710529F48091E8008B778093E800F90120C08091E80083FF02C081E0089565 +:200780008EB3882339F18EB3853031F18091E80082FFF0CF06C08091F100819361507040B5 +:2007A00021F08091F2008823B1F78091E8008B778093E80061157105E9F606C08EB388235F +:2007C00049F08EB3853041F08091E80080FFF6CF80E0089582E0089583E0089542D044D05A +:2007E0001EBA10922502109224021092230284E089BD89B5826089BD09B400FEFDCF809121 +:20080000D800982F9F779093D80080688093D800809163008E7F809363008091D8008F7D69 +:200820008093D8008091E0008E7F8093E0008091E1008E7F8093E1008091E2008160809302 +:20084000E2008091E100877F8093E1008091E20088608093E2000895C1DF81E08093260221 +:2008600008951092E20008951092E10008951F920F920FB60F9211241F932F933F934F9385 +:200880005F936F937F938F939F93AF93BF93EF93FF93E9EEF0E0108117701082E0EFF0E066 +:2008A0008081877F80837894C3D0F894A9EEB0E01C92E0EFF0E08081886080831C93FF9164 +:2008C000EF91BF91AF919F918F917F916F915F914F913F912F911F910F900FBE0F901F90DE +:2008E00018951F920F920FB60F9211242F933F934F935F936F937F938F939F93AF93BF93FA +:20090000EF93FF938091E10080FF1BC08091E20080FF17C08091E1008E7F8093E10080912A +:20092000E2008E7F8093E2008091E20080618093E2008091D80080628093D80019BC1EBAA7 +:20094000D1D18091E10084FF29C08091E20084FF25C084E089BD89B5826089BD09B400FE71 +:20096000FDCF8091D8008F7D8093D8008091E1008F7E8093E1008091E2008F7E8093E200E3 +:200980008091E20081608093E20080912502882311F481E001C084E08EBBA4D18091E10070 +:2009A00083FF27C08091E20083FF23C08091E100877F8093E10082E08EBB10922502809105 +:2009C000E1008E7F8093E1008091E2008E7F8093E2008091E20080618093E200AADD80E090 +:2009E00060E042E093DD8091F00088608093F00079D18091E10082FF0AC08091E20082FF3E +:200A000006C08091E1008B7F8093E1006BD1FF91EF91BF91AF919F918F917F916F915F91F4 +:200A20004F913F912F910F900FBE0F901F9018951F93DF93CF93CDB7DEB7AC970FB6F894AC +:200A4000DEBF0FBECDBFE7E2F2E08091F100819322E0EF32F207C9F78091270230912802EE +:200A6000353009F487C0363040F43130C9F1313070F0333009F01DC133C0383009F4EFC016 +:200A8000393009F4FEC0363009F013C192C0803821F0823809F00DC108C090912302809144 +:200AA0002402882399F0926011C080912B0287708093E9008091EB0090E025E09695879530 +:200AC0002A95E1F7982F91701092E9008091E800877F8093E8009093F1001092F100CAC001 +:200AE000882319F0823009F0E4C090E08F719070009721F0029709F0DDC00CC080912902A4 +:200B0000813009F0D7C010922402333069F5809324022AC080912902882331F520912B02FD +:200B2000277009F4C7C02093E9008091EB0080FFC1C0333021F48091EB00806213C08091C8 +:200B4000EB0080618093EB0081E090E002C0880F991F2A95E2F78093EA001092EA008091B7 +:200B6000EB0088608093EB001092E9008091E800877F83C0882309F09CC0109129028091FA +:200B8000E800877F8093E800E8DC04C08EB3882309F490C08091E80080FFF8CF812F8F77B6 +:200BA00011F492E001C093E09EBB80688093E30081C08058823008F07CC0809129029091F7 +:200BC0002A0223E08C3D920799F55FB7F894DE0115964EE020E030E061E2E42FF0E0609373 +:200BE0005700849120FF03C082958F704F5F982F9F70892F805D8A3308F0895F8C93119615 +:200C00001C9211972F5F3F4F12962431310529F75FBF8AE28B8383E08C838091E800877F06 +:200C20008093E800CE0103966AE270E0E4DC11C060912B02AE014F5F5F4F2CDCBC0100979F +:200C4000C9F18091E800877F8093E80089819A812BDD8091E8008B778093E8002BC080381A +:200C600041F58091E800877F8093E800809125028093F1008091E8008E778093E8006DDCC6 +:200C800019C08823B1F490912902923098F48091E800877F8093E800909325025EDC809102 +:200CA0002502882311F483E001C084E08EBB2DDB01C028DB8091E80083FF0AC08091EB007F +:200CC00080628093EB008091E800877F8093E800AC960FB6F894DEBF0FBECDBFCF91DF91E1 +:200CE0001F91089508951F938EB3882361F01091E9001092E9008091E80083FF01C098DE54 +:200D000017701093E9001F9108950895FC018EB3843021F587859089A189B2890097A10507 +:200D2000B105E1F085818093E9008091E80082FF15C08091F200882319F42FEF3FEF04C010 +:200D40008091F100282F30E08091F200882341F48091E8008B778093E80002C02FEF3FEF43 +:200D6000C9010895FC018EB3843011F587859089A189B2890097A105B105D1F081818093C1 +:200D8000E9008091F2008823A9F09091E8008091E8008E778093E80095FD0CC0FDDB982F24 +:200DA000882349F48091E8008E778093E80003C092E001C090E0892F0895FC018EB38430A5 +:200DC00051F487859089A189B2890097A105B10511F0CF01C7CF08951F93FC01162F8EB318 +:200DE0008430D9F487859089A189B2890097A105B10599F081818093E9008091E80085FDF3 +:200E000008C08091E8008E778093E800C5DB882329F41093F10080E001C082E01F91089545 +:200E20000F931F93CF93DF93EC010D96FC0189E0DF011D928A95E9F72A813B8109818C8108 +:200E4000882311F410E001C014E0C90151DB182B1260802F61E8412F59DB882329F12E8182 +:200E60003F810D818885882311F410E001C014E0C9013EDB182B1260802F60E8412F46DBA2 +:200E8000882391F02A853B8509858C85882311F410E001C014E0C9012BDB182B1260802F8F +:200EA00061EC412F33DB01C080E0DF91CF911F910F910895CF93DF93EC018091E80083FF4D +:200EC00060C0888190E020912B0230912C022817390709F056C080912802813261F082322B +:200EE00020F4803209F04DC019C0823269F1833209F047C038C080912702813A09F041C0A3 +:200F00008091E800877F8093E800CE010F9667E070E071DB8091E8008B7713C08091270278 +:200F2000813279F58091E800877F8093E800CE010F9667E070E013DCCE013ED98091E800BD +:200F40008E778093E8001DC0809127028132C9F48091E800877F8093E800809129028D87C0 +:200F6000CE01C8D90DC080912702813251F48091E800877F8093E800CE0160912902C5DE7A +:200F8000ECDADF91CF910895A1E21A2EAA1BBB1BFD010DC0AA1FBB1FEE1FFF1FA217B307AC +:200FA000E407F50720F0A21BB30BE40BF50B661F771F881F991F1A9469F760957095809539 +:200FC00090959B01AC01BD01CF010895F894FFCF000340000004400000020800000000008D +:200FE000000000000000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0B +:201000004BC0000064C0000062C0000060C000005EC000005CC000005AC0000058C00000F3 +:2010200056C0000054C0000052C00000CBC400004EC000004CC000004AC0000048C00000B9 +:2010400046C0000044C0000042C0000040C000003EC000003CC000003AC0000038C0000098 +:2010600036C0000034C0000032C0000030C000002EC000002CC000002AC0000028C00000F8 +:2010800026C0000024C0000022C0000020C000001EC000001CC0000011241FBECFEFD2E088 +:2010A000DEBFCDBF11E0A0E0B1E0E4EBFCE102C005900D92A836B107D9F711E0A8E6B1E0ED +:2010C00001C01D92A738B107E1F74FD3F1C598CF982F15C08091F200882371F48091E8004A +:2010E0008B7F8093E80003C08EB3882351F08091E80082FFF9CF02C08091F1009150992358 +:2011000049F708952091760130917501809174019091730180936D0190936E01C901809388 +:201120006F0190937001089580917101843009F45AC0853030F4813059F0833009F0C3C0BE +:201140001FC0853009F4A0C0863009F0BCC0AFC080917201823008F0B6C0D4DF8091720129 +:20116000882361F480916D0190916E0123E0FC0120935700E89507B600FCFDCF85E008C027 +:2011800080917201882311F0823029F4BBDF89E0809301010895813009F095C020E030E08C +:2011A00040E050E0F90184918F3F81F0CA01AA27BB2780936C0130936E0120936D018AE0D6 +:2011C0008093010185E08093690108952F5F3F4F4F4F5F4F2030F0E13F07F0E04F07F0E0B6 +:2011E0005F0701F7089580917201833051F581E0809368018091770190917801892B71F062 +:2012000080917301813009F05EC0809176019091750190936B0180936A0108958091730133 +:20122000882361F42CE088E190E00FB6F894A895809360000FBE20936000089510920001A8 +:201240000895882309F03FC0809173018F3F09F03AC0E0E0F0E093E085E090935700E895A9 +:2012600007B600FCFDCF80935700E89507B600FCFDCFE058FF4F20E1E030F20771F781E123 +:2012800080935700E8950895E091730180917201882321F4F0E0EB5FFE4F05C0813099F437 +:2012A000F0E0EE52FF4F808180937C01089580917201833041F480917301882321F48091E0 +:2012C000740180936C0108952F923F924F925F926F927F929F92AF92BF92CF92DF92EF92F0 +:2012E000FF920F931F93CF93DF938091850190918601909378018093770180917901882399 +:2013000051F08091790181508093790180917901882309F45D9A80917A01882351F08091F0 +:201320007A01815080937A0180917A01882309F45C9A80918001833009F4B2C1843030F41C +:20134000813071F0823009F0E3C111C1853009F4C5C1853008F4BAC1863009F0D9C1CDC11F +:201360005C9883E080937A018091E800877F8093E80080916801882329F0D6DE5D9A5C9AAF +:201380001092680120917701309178012115310529F42AC08EB3882309F4BAC18091E8000F +:2013A00082FFF8CF8091F10080937101215030403093780120937701E2E7F1E00CC080919F +:2013C000F10081932150304081E0E737F80719F43183208308C08091F200882381F7309394 +:2013E000780120937701A0DE80910101853009F0BAC08091770190917801892B21F482E042 +:2014000080930101B0C08AE163DE80916D018F715FDEC0916F01D091700120916D0130916C +:201420006E0121968E01021B130B219780917201882309F093C0180136942794C901A091F0 +:201440006C01B0E09C01AD0162E0E62EF12C012D112DE20EF31E041F151F59016A0190E0D8 +:2014600099249394B5E0A3E048C08091F200882371F48091E8008B7F8093E80004C08EB352 +:20148000882309F445C18091E80082FFF8CF0894210831088091F100682F8091F100782F1D +:2014A000F5010B0190925700E89511249F5F903419F021143104A1F4F901B0935700E89524 +:2014C00007B600FCFDCF2114310451F0F701A0935700E89507B600FCFDCFA801970190E0A7 +:2014E00042E0442E512C612C712CE40CF51C061D171DA40CB51CC61CD71C2114310409F0A0 +:20150000B4CFD0936E01C0936D0181E180935700E89527C08091F200882371F48091E80079 +:201520008B7F8093E80004C08EB3882309F4F0C08091E80082FFF8CF6091F10080916D01A7 +:2015400090916E01A7D380916D0190916E01019690936E0180936D010150104001151105FB +:20156000C9F680E1B5DD8091E8008B7FC3C08091E800877F8093E8005D9883E08093790154 +:2015800004C08EB3882309F4C3C08091E80080FFF8CF80910101893091F08A3069F4809167 +:2015A0007201813049F480916D0190916E018093F1009093F1009BC080917C0196C0609173 +:2015C0006F017091700120916D0130916E016F5F7F4F7B01E21AF30A6150704080917201E4 +:2015E000882389F5870116950795C901A0916C01B0E09C01AD011FC08091F200803271F4B7 +:201600008091E8008E7F8093E80004C08EB3882309F47EC08091E80080FFF8CFF90185918F +:2016200094918093F1009093F100015010402E5F3F4F4F4F5F4F01151105F1F670936E01E0 +:2016400060936D0129C0823039F523C08091F200803271F48091E8008E7F8093E80004C09E +:201660008EB3882309F454C08091E80080FFF8CF00916D0110916E01C80104D38093F1007B +:201680000F5F1F4F10936E0100936D010894E108F108E114F104D1F682E08093010127C0CE +:2016A0008091E800877F8093E800809169018093F1001092F1001092F1001092F1008091E7 +:2016C00001018093F1001092F10011C08091E800877F8093E8001092690119C08091E800C8 +:2016E000877F8093E800809101018093F1008091E8008E7F8093E8000AC08091E800877F08 +:201700008093E8005D9A5C9A82E08093010187D0DF91CF911F910F91FF90EF90DF90CF9017 +:20172000BF90AF909F907F906F905F904F903F902F9008952BD181E085BF15BE089584B799 +:20174000877F84BF88E10FB6F89480936000109260000FBE81E085BF82E085BF8AB18063DB +:201760008AB98BB180638BB90CC1E9DF789401C080D2809100018823D9F78091680188235D +:20178000B9F7D8DFE0916A01F0916B010995FA01923071F0933089F0913029F488E091E06A +:2017A00022E130E019C080E090E020E030E014C08AE191E02BE130E00FC0882339F48091D9 +:2017C0003501282F30E085E391E006C080913901282F30E089E391E091838083C9010895C0 +:2017E0008091EB0081608093EB001092ED006093EC004093ED008091EE00881F8827881FE4 +:2018000008951092F4001092F0001092E8001092ED00EBEEF0E080818E7F80830895809182 +:201820007F0188238CF403C08EB38823B1F08091E80082FFF9CF8091E8008B7F8093E8006D +:2018400008958EB3882349F08091E80080FFF9CF8091E8008E7F8093E80008959C0140917A +:201860008501509186014617570718F4F90120E038C06115710511F0AB01F8CF8091E80068 +:201880008E7F8093E80040E050E0F0CF8091E80083FF02C081E008958091E80082FD2DC091 +:2018A0008EB3882381F18EB3853079F18091E80080FF17C09091F20006C081918093F1002C +:2018C000415050409F5F4115510511F09032A8F320E0903209F421E08091E8008E7F809306 +:2018E000E8004115510591F6222381F606C08EB3882349F08EB3853041F08091E80082FF85 +:20190000F6CF80E0089582E0089583E0089554D056D01EBA10927D0184E089BD89B58260FA +:2019200089BD09B400FEFDCF8091D800982F9F779093D80080688093D800809163008E7FC5 +:20194000809363008091D8008F7D8093D8008091E0008E7F8093E0008091E1008E7F80932E +:20196000E1008091E20081608093E2008091E100877F8093E1008091E20088608093E20001 +:201980000895C5DF81E080937E010895C0DFE0EEF0E0808181608083E8EDF0E080818F77A8 +:2019A00080830AD00CD019BCE3E6F0E080818160808310927E0108951092E200089510929A +:2019C000E10008951F920F920FB60F9211242F933F934F935F936F937F938F939F93AF938A +:2019E000BF93EF93FF938091E10080FF1BC08091E20080FF17C08091E1008E7F8093E100F9 +:201A00008091E2008E7F8093E2008091E20080618093E2008091D80080628093D80019BC7D +:201A20001EBA26D18091E10084FF29C08091E20084FF25C084E089BD89B5826089BD09B451 +:201A400000FEFDCF8091D8008F7D8093D8008091E1008F7E8093E1008091E2008F7E8093D6 +:201A6000E2008091E20081608093E20080917D01882311F481E001C084E08EBBF9D08091D3 +:201A8000E10083FF22C08091E20083FF1EC08091E100877F8093E10082E08EBB10927D01F7 +:201AA0008091E1008E7F8093E1008091E2008E7F8093E2008091E20080618093E200A1DEF6 +:201AC00080E060E042E28CDED3D08091E10082FF0AC08091E20082FF06C08091E1008B7FC2 +:201AE0008093E100C5D0FF91EF91BF91AF919F918F917F916F915F914F913F912F910F905E +:201B00000FBE0F901F9018951F93DF93CF9300D0CDB7DEB7EFE7F1E08091F100819381E070 +:201B2000E738F807C9F790917F0180918001853011F1863040F48130B9F0813070F08330D5 +:201B400009F081C011C0883009F453C0893009F462C0863009F077C02DC0903809F474C00E +:201B6000923809F070C070C0992309F46DC0923009F069C069C0992309F065C01091810152 +:201B80008091E800877F8093E80049DE04C08EB3882309F459C08091E80080FFF8CF812F6F +:201BA0008F7711F492E001C093E09EBB80688093E3004AC09058923008F045C080918101F9 +:201BC0009091820160918301AE014F5F5F4FDFDDBC010097C9F18091E800877F8093E8001D +:201BE00089819A813BDE8091E8008B7F8093E8002BC0903841F58091E800877F8093E800C6 +:201C000080917D018093F1008091E8008E7F8093E80005DE19C09923B1F4909181019230AE +:201C200098F48091E800877F8093E80090937D01F6DD80917D01882311F483E001C084E0E3 +:201C40008EBB16D001C040DB8091E80083FF0AC08091EB0080628093EB008091E800877F59 +:201C60008093E8000F900F90CF91DF911F91089508958EB3882329F08091E80083FF01C030 +:201C800043CF0895F999FECF92BD81BDF89A992780B50895262FF999FECF1FBA92BD81BD6B +:201CA00020BD0FB6F894FA9AF99A0FBE01960895F894FFCF01021E938220DCFB1201100123 +:201CC00000000020EB03F72F00000001000109021B0001010080320904000000FE010200E6 +:201CE0000921030000000C0001040309042C03410072006400750069006E006F0020004D28 +:1C1D000000650067006100200032003500360030002000440046005500000000AE +:00000001FF diff --git a/test/ardmake/hardware/firmwares/README.txt b/test/ardmake/hardware/firmwares/README.txt new file mode 100644 index 0000000..386dcf0 --- /dev/null +++ b/test/ardmake/hardware/firmwares/README.txt @@ -0,0 +1,33 @@ +Arduino Uno and Mega 2560 Firmwares for the ATmega8U2 + +This directory contains the firmwares used on the ATmega8U2 on the Arduino +Uno and Arduino Mega 2560. The arduino-usbdfu directory contains the DFU +bootloader on the 8U2; the arduino-usbserial directory contains the actual +usb to serial firmware. Both should be compiled against LUFA 100807. The +two .hex files in this directory combine the dfu and serial firmwares into +a single file to burn onto the 8U2. + +To burn (Uno): +avrdude -p at90usb82 -F -P usb -c avrispmkii -U flash:w:UNO-dfu_and_usbserial_combined.hex -U lfuse:w:0xFF:m -U hfuse:w:0xD9:m -U efuse:w:0xF4:m -U lock:w:0x0F:m + +To burn (Mega 2560): +avrdude -p at90usb82 -F -P usb -c avrispmkii -U flash:w:MEGA-dfu_and_usbserial_combined.hex -U lfuse:w:0xFF:m -U hfuse:w:0xD9:m -U efuse:w:0xF4:m -U lock:w:0x0F:m + + +Note on USB Vendor IDs (VID) and Product IDs (PID): The arduino-usbdfu +project uses Atmel's VID and MCU-specific PIDs to maintain compatibility +with their FLIP software. The source code to the arduino-usbserial +project includes Atmel's VID and a PID donated by them to LUFA. This +PID is used in LUFA's USBtoSerial project, which forms the basis for +arduino-usbserial. According to the LUFA documentation, this VID/PID +combination is: + + "For use in testing of LUFA powered devices during development only, + by non-commercial entities. All devices must accept collisions on this + VID/PID range (from other in-development LUFA devices) to be resolved + by using a unique release number in the Device Descriptor. No devices + using this VID/PID combination may be released to the general public." + +The production version of the arduino-usbserial firmware uses the +Arduino VID. This is only for use with official Arduino hardware and +should not be used on other products. \ No newline at end of file diff --git a/test/ardmake/hardware/firmwares/UNO-dfu_and_usbserial_combined.hex b/test/ardmake/hardware/firmwares/UNO-dfu_and_usbserial_combined.hex new file mode 100644 index 0000000..60acf44 --- /dev/null +++ b/test/ardmake/hardware/firmwares/UNO-dfu_and_usbserial_combined.hex @@ -0,0 +1,234 @@ +:200000009CC00000B5C00000B3C00000B1C00000AFC00000ADC00000ABC00000A9C000007B +:20002000A7C00000A5C00000A3C0000054C4000018C400009DC000009BC0000099C000008C +:2000400097C0000095C0000093C0000091C000008FC000008DC000008BC000000EC100009A +:2000600087C0000085C0000083C0000081C000007FC000007DC000007BC0000079C0000080 +:2000800077C0000075C0000073C0000071C000006FC000006DC00000120110010200000806 +:2000A0004123010001000102DC0109023E00020100C032090400000102020100052400017F +:2000C00010042402060524060001070582030800FF09040100020A000000070504024000AC +:2000E0000107058302400001040309043203410072006400750069006E006F0020002800CA +:200100007700770077002E00610072006400750069006E006F002E0063006300290000003D +:200120001803410072006400750069006E006F00200055006E006F00000011241FBECFEFB0 +:20014000D2E0DEBFCDBF11E0A0E0B1E0E4ECFFE002C005900D92A631B107D9F712E0A6E145 +:20016000B1E001C01D92AF32B107E1F7F1D028C747CF9C01DC01AE57BF4FED91FC91119707 +:2001800041911196FC93EE9380589F4FE817F90711F42D933C939FB7F894F901EC57FF4F10 +:2001A0008081815080839FBF842F0895DF92EF92FF920F931F93FC018489813019F082306F +:2001C00021F405C040E3D42E04C0DD2402C030E2D32E8389823011F488E0D82A8589873094 +:2001E00031F0883031F0863031F482E003C084E001C086E0D82A1092C9001092C800109201 +:20020000CA00E784F0880189128980E0E81681EEF80680E0080780E0180719F420E130E035 +:200220000FC0C801B701969587957795679560587B47814E9F4FA8019701A0D62150304050 +:200240003093CD002093CC00D092CA0080E0E81681EEF80680E0080780E0180711F082E047 +:2002600001C080E08093C80088E98093C9001F910F91FF90EF90DF9008951F920F920FB6B4 +:200280000F9211242F938F939F93EF93FF939091CE008EB38430F1F4E0919901F0919A016E +:2002A0009083E0919901F0919A01CF01019690939A01809399018959914021F489E191E08F +:2002C000928381839FB7F89480919D018F5F80939D019FBFFF91EF919F918F912F910F90B8 +:2002E0000FBE0F901F901895FC01858580FF02C05F9808955F9A089580E091E0D5C580E0F9 +:2003000091E088C584B7877F84BF28E10FB6F89420936000109260000FBE87E690E090935F +:20032000CD008093CC0086E08093CA001092C8002093C900539A5A9A8AB180638AB98BB16A +:2003400080638BB983D284E085BD5F9A579A08950F931F93CF93DF93D5DF2FB7F8948EE92F +:2003600091E090931F0280931E0290932102809320022FBF2FB7F89489E191E090939A0121 +:200380008093990190939C0180939B012FBF7894CEE9D1E003E08FB7F894909122028FBF97 +:2003A000903809F180E091E0ABD497FD1CC0E0911E02F0911F028083E0911E02F0911F0252 +:2003C000CF01019690931F0280931E028E51924011F4D283C1839FB7F894809122028F5FEB +:2003E000809322029FBF8FB7F89410919D018FBFA89902C0113678F1A89A80919D018823BA +:2004000061F05D980093160108C089E191E0B1DE682F80E091E0DAD411501123B1F7809156 +:200420001601882351F08091160181508093160180911601882309F45D9A809117018823FB +:2004400051F08091170181508093170180911701882309F45C9A8FB7F894909122028FBF0A +:20046000992369F08EE991E084DE982F8091C80085FFFCCF9093CE005C980093170180E03E +:2004800091E095D42AD487CFDA01923049F0933061F09130F9F4E8E9F0E022E130E01EC004 +:2004A000EAEAF0E02EE330E019C0813049F0813018F0823079F408C0E8EEF0E0849107C092 +:2004C000ECEEF0E0849103C0E0E2F1E08491282F30E004C0E0E0F0E020E030E0ED93FC9318 +:2004E000C901089528E030E040E003C04F5F220F331F28173907D0F3842F8295807F0895C1 +:200500008093E9008091EB0081608093EB001092ED006093EC004093ED008091EE00881F30 +:200520008827881F08951092F40090E09093E9001092F0001092E8001092ED008091EB000F +:200540008E7F8093EB009F5F953081F708958091270288238CF403C08EB38823B1F08091F2 +:20056000E80082FFF9CF8091E8008B778093E80008958EB3882349F08091E80080FFF9CF52 +:200580008091E8008E778093E800089594E68091EC0080FF05C08091E80080FF05C023C0EA +:2005A0008091E80082FD1FC08EB3882311F482E008958EB3853011F483E008958091EB00FD +:2005C00085FF02C081E008958091E10082FFDFCF8091E1008B7F8093E100992311F484E0A1 +:2005E00008959150D4CF80E008959C0140912D0250912E024617570718F4F90120E038C076 +:200600006115710511F0AB01F8CF8091E8008E778093E80040E050E0F0CF8091E80083FFF7 +:2006200002C081E008958091E80082FD2DC08EB3882381F18EB3853079F18091E80080FF5F +:2006400017C09091F20006C081918093F100415050409F5F4115510511F09830A8F320E0A5 +:20066000983009F421E08091E8008E778093E8004115510591F6222381F606C08EB388231A +:2006800049F08EB3853041F08091E80082FFF6CF80E0089582E0089583E008959C01409151 +:2006A0002D0250912E024617570710F490E03BC06115710511F0AB01F9CF8091E8008E7771 +:2006C0008093E80040E050E0F1CF8091E80083FF02C081E008958091E80082FD30C08EB32B +:2006E000882399F18EB3853091F18091E80080FF1AC08091F20009C0F9012F5F3F4FE491A4 +:20070000E093F100415050408F5F4115510511F0883090F390E0883009F491E08091E800EF +:200720008E778093E8004115510579F6992369F606C08EB3882349F08EB3853041F0809160 +:20074000E80082FFF6CF80E0089582E0089583E008959C016115710529F48091E8008B77CE +:200760008093E800F90120C08091E80083FF02C081E008958EB3882339F18EB3853031F13B +:200780008091E80082FFF0CF06C08091F10081936150704021F08091F2008823B1F780916B +:2007A000E8008B778093E80061157105E9F606C08EB3882349F08EB3853041F08091E8007E +:2007C00080FFF6CF80E0089582E0089583E0089542D044D01EBA10922502109224021092A8 +:2007E000230284E089BD89B5826089BD09B400FEFDCF8091D800982F9F779093D800806894 +:200800008093D800809163008E7F809363008091D8008F7D8093D8008091E0008E7F809305 +:20082000E0008091E1008E7F8093E1008091E20081608093E2008091E100877F8093E10030 +:200840008091E20088608093E2000895C1DF81E08093260208951092E20008951092E100AE +:2008600008951F920F920FB60F9211241F932F933F934F935F936F937F938F939F93AF932A +:20088000BF93EF93FF93E9EEF0E0108117701082E0EFF0E08081877F80837894C3D0F894CD +:2008A000A9EEB0E01C92E0EFF0E08081886080831C93FF91EF91BF91AF919F918F917F9129 +:2008C0006F915F914F913F912F911F910F900FBE0F901F9018951F920F920FB60F921124B4 +:2008E0002F933F934F935F936F937F938F939F93AF93BF93EF93FF938091E10080FF1BC034 +:200900008091E20080FF17C08091E1008E7F8093E1008091E2008E7F8093E2008091E200B3 +:2009200080618093E2008091D80080628093D80019BC1EBAD1D18091E10084FF29C080916D +:20094000E20084FF25C084E089BD89B5826089BD09B400FEFDCF8091D8008F7D8093D800D6 +:200960008091E1008F7E8093E1008091E2008F7E8093E2008091E20081608093E2008091B5 +:200980002502882311F481E001C084E08EBBA4D18091E10083FF27C08091E20083FF23C089 +:2009A0008091E100877F8093E10082E08EBB109225028091E1008E7F8093E1008091E200F1 +:2009C0008E7F8093E2008091E20080618093E200AADD80E060E042E093DD8091F0008860AA +:2009E0008093F00079D18091E10082FF0AC08091E20082FF06C08091E1008B7F8093E10043 +:200A00006BD1FF91EF91BF91AF919F918F917F916F915F914F913F912F910F900FBE0F902F +:200A20001F9018951F93DF93CF93CDB7DEB7AC970FB6F894DEBF0FBECDBFE7E2F2E0809185 +:200A4000F100819322E0EF32F207C9F78091270230912802353009F487C0363040F43130EC +:200A6000C9F1313070F0333009F01DC133C0383009F4EFC0393009F4FEC0363009F013C163 +:200A800092C0803821F0823809F00DC108C09091230280912402882399F0926011C080916D +:200AA0002B0287708093E9008091EB0090E025E0969587952A95E1F7982F91701092E90074 +:200AC0008091E800877F8093E8009093F1001092F100CAC0882319F0823009F0E4C090E078 +:200AE0008F719070009721F0029709F0DDC00CC080912902813009F0D7C0109224023330AB +:200B000069F5809324022AC080912902882331F520912B02277009F4C7C02093E9008091A1 +:200B2000EB0080FFC1C0333021F48091EB00806213C08091EB0080618093EB0081E090E0F5 +:200B400002C0880F991F2A95E2F78093EA001092EA008091EB0088608093EB001092E900F6 +:200B60008091E800877F83C0882309F09CC0109129028091E800877F8093E800E8DC04C0E5 +:200B80008EB3882309F490C08091E80080FFF8CF812F8F7711F492E001C093E09EBB80683B +:200BA0008093E30081C08058823008F07CC08091290290912A0223E08C3D920799F55FB7AE +:200BC000F894DE0115964EE020E030E061E2E42FF0E060935700849120FF03C082958F7044 +:200BE0004F5F982F9F70892F805D8A3308F0895F8C9311961C9211972F5F3F4F129624310A +:200C0000310529F75FBF8AE28B8383E08C838091E800877F8093E800CE0103966AE270E076 +:200C2000E4DC11C060912B02AE014F5F5F4F2CDCBC010097C9F18091E800877F8093E800EA +:200C400089819A812BDD8091E8008B778093E8002BC0803841F58091E800877F8093E8009E +:200C6000809125028093F1008091E8008E778093E8006DDC19C08823B1F4909129029230BF +:200C800098F48091E800877F8093E800909325025EDC80912502882311F483E001C084E0DA +:200CA0008EBB2DDB01C028DB8091E80083FF0AC08091EB0080628093EB008091E800877FFF +:200CC0008093E800AC960FB6F894DEBF0FBECDBFCF91DF911F91089508951F938EB3882338 +:200CE00061F01091E9001092E9008091E80083FF01C098DE17701093E9001F9108950895DF +:200D0000FC018EB3843021F587859089A189B2890097A105B105E1F085818093E90080916A +:200D2000E80082FF15C08091F200882319F42FEF3FEF04C08091F100282F30E08091F2003E +:200D4000882341F48091E8008B778093E80002C02FEF3FEFC9010895FC018EB3843011F550 +:200D600087859089A189B2890097A105B105D1F081818093E9008091F2008823A9F09091CF +:200D8000E8008091E8008E778093E80095FD0CC0FDDB982F882349F48091E8008E7780937C +:200DA000E80003C092E001C090E0892F0895FC018EB3843051F487859089A189B289009738 +:200DC000A105B10511F0CF01C7CF08951F93FC01162F8EB38430D9F487859089A189B28973 +:200DE0000097A105B10599F081818093E9008091E80085FD08C08091E8008E778093E8003D +:200E0000C5DB882329F41093F10080E001C082E01F9108950F931F93CF93DF93EC010D964E +:200E2000FC0189E0DF011D928A95E9F72A813B8109818C81882311F410E001C014E0C901A1 +:200E400051DB182B1260802F61E8412F59DB882329F12E813F810D818885882311F410E0A6 +:200E600001C014E0C9013EDB182B1260802F60E8412F46DB882391F02A853B8509858C8563 +:200E8000882311F410E001C014E0C9012BDB182B1260802F61EC412F33DB01C080E0DF916D +:200EA000CF911F910F910895CF93DF93EC018091E80083FF60C0888190E020912B02309171 +:200EC0002C022817390709F056C080912802813261F0823220F4803209F04DC019C082320A +:200EE00069F1833209F047C038C080912702813A09F041C08091E800877F8093E800CE0133 +:200F00000F9667E070E071DB8091E8008B7713C080912702813279F58091E800877F80930E +:200F2000E800CE010F9667E070E013DCCE013ED98091E8008E778093E8001DC080912702D9 +:200F40008132C9F48091E800877F8093E800809129028D87CE01C8D90DC0809127028132AD +:200F600051F48091E800877F8093E800CE0160912902C5DEECDADF91CF910895A1E21A2EA6 +:200F8000AA1BBB1BFD010DC0AA1FBB1FEE1FFF1FA217B307E407F50720F0A21BB30BE40B49 +:200FA000F50B661F771F881F991F1A9469F760957095809590959B01AC01BD01CF01089501 +:200FC000F894FFCF00034000000440000002080000000000000000000000FFFFFFFFFFFF2C +:200FE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF11 +:201000004BC0000064C0000062C0000060C000005EC000005CC000005AC0000058C00000F3 +:2010200056C0000054C0000052C00000CBC400004EC000004CC000004AC0000048C00000B9 +:2010400046C0000044C0000042C0000040C000003EC000003CC000003AC0000038C0000098 +:2010600036C0000034C0000032C0000030C000002EC000002CC000002AC0000028C00000F8 +:2010800026C0000024C0000022C0000020C000001EC000001CC0000011241FBECFEFD2E088 +:2010A000DEBFCDBF11E0A0E0B1E0E4EBFCE102C005900D92AC35B107D9F711E0ACE5B1E0E7 +:2010C00001C01D92AB37B107E1F74FD3F1C598CF982F15C08091F200882371F48091E80047 +:2010E0008B7F8093E80003C08EB3882351F08091E80082FFF9CF02C08091F1009150992358 +:2011000049F7089520916A013091690180916801909167018093610190936201C9018093D0 +:20112000630190936401089580916501843009F45AC0853030F4813059F0833009F0C3C0E2 +:201140001FC0853009F4A0C0863009F0BCC0AFC080916601823008F0B6C0D4DF8091660141 +:20116000882361F4809161019091620123E0FC0120935700E89507B600FCFDCF85E008C03F +:2011800080916601882311F0823029F4BBDF89E0809301010895813009F095C020E030E098 +:2011A00040E050E0F90184918F3F81F0CA01AA27BB278093600130936201209361018AE0FA +:2011C0008093010185E080935D0108952F5F3F4F4F4F5F4F2030F0E13F07F0E04F07F0E0C2 +:2011E0005F0701F7089580916601833051F581E080935C0180916B0190916C01892B71F092 +:2012000080916701813009F05EC080916A019091690190935F0180935E010895809167017B +:20122000882361F42CE088E190E00FB6F894A895809360000FBE20936000089510920001A8 +:201240000895882309F03FC0809167018F3F09F03AC0E0E0F0E093E085E090935700E895B5 +:2012600007B600FCFDCF80935700E89507B600FCFDCFE058FF4F20E1E030F20771F781E123 +:2012800080935700E8950895E091670180916601882321F4F0E0EB5FFE4F05C0813099F44F +:2012A000F0E0EE52FF4F808180937001089580916601833041F480916701882321F4809104 +:2012C00068018093600108952F923F924F925F926F927F929F92AF92BF92CF92DF92EF9208 +:2012E000FF920F931F93CF93DF938091790190917A0190936C0180936B0180916D018823D5 +:2013000051F080916D01815080936D0180916D01882309F45D9A80916E01882351F0809120 +:201320006E01815080936E0180916E01882309F45C9A80917401833009F4B2C1843030F44C +:20134000813071F0823009F0E3C111C1853009F4C5C1853008F4BAC1863009F0D9C1CDC11F +:201360005C9883E080936E018091E800877F8093E80080915C01882329F0D6DE5D9A5C9AC7 +:2013800010925C0120916B0130916C012115310529F42AC08EB3882309F4BAC18091E80033 +:2013A00082FFF8CF8091F100809365012150304030936C0120936B01E6E6F1E00CC08091C0 +:2013C000F10081932150304081E0EB36F80719F43183208308C08091F200882381F7309391 +:2013E0006C0120936B01A0DE80910101853009F0BAC080916B0190916C01892B21F482E072 +:2014000080930101B0C08AE163DE809161018F715FDEC0916301D09164012091610130919C +:20142000620121968E01021B130B219780916601882309F093C0180136942794C901A09108 +:201440006001B0E09C01AD0162E0E62EF12C012D112DE20EF31E041F151F59016A0190E0E4 +:2014600099249394B5E0A3E048C08091F200882371F48091E8008B7F8093E80004C08EB352 +:20148000882309F445C18091E80082FFF8CF0894210831088091F100682F8091F100782F1D +:2014A000F5010B0190925700E89511249F5F903419F021143104A1F4F901B0935700E89524 +:2014C00007B600FCFDCF2114310451F0F701A0935700E89507B600FCFDCFA801970190E0A7 +:2014E00042E0442E512C612C712CE40CF51C061D171DA40CB51CC61CD71C2114310409F0A0 +:20150000B4CFD0936201C093610181E180935700E89527C08091F200882371F48091E80091 +:201520008B7F8093E80004C08EB3882309F4F0C08091E80082FFF8CF6091F10080916101B3 +:2015400090916201A7D3809161019091620101969093620180936101015010400115110537 +:20156000C9F680E1B5DD8091E8008B7FC3C08091E800877F8093E8005D9883E080936D0160 +:2015800004C08EB3882309F4C3C08091E80080FFF8CF80910101893091F08A3069F4809167 +:2015A0006601813049F480916101909162018093F1009093F1009BC08091700196C06091A3 +:2015C00063017091640120916101309162016F5F7F4F7B01E21AF30A615070408091660120 +:2015E000882389F5870116950795C901A0916001B0E09C01AD011FC08091F200803271F4C3 +:201600008091E8008E7F8093E80004C08EB3882309F47EC08091E80080FFF8CFF90185918F +:2016200094918093F1009093F100015010402E5F3F4F4F4F5F4F01151105F1F670936201EC +:201640006093610129C0823039F523C08091F200803271F48091E8008E7F8093E80004C0AA +:201660008EB3882309F454C08091E80080FFF8CF0091610110916201C80104D38093F10093 +:201680000F5F1F4F10936201009361010894E108F108E114F104D1F682E08093010127C0E6 +:2016A0008091E800877F8093E80080915D018093F1001092F1001092F1001092F1008091F3 +:2016C00001018093F1001092F10011C08091E800877F8093E80010925D0119C08091E800D4 +:2016E000877F8093E800809101018093F1008091E8008E7F8093E8000AC08091E800877F08 +:201700008093E8005D9A5C9A82E08093010187D0DF91CF911F910F91FF90EF90DF90CF9017 +:20172000BF90AF909F907F906F905F904F903F902F9008952BD181E085BF15BE089584B799 +:20174000877F84BF88E10FB6F89480936000109260000FBE81E085BF82E085BF8AB18063DB +:201760008AB98BB180638BB90CC1E9DF789401C080D2809100018823D9F780915C01882369 +:20178000B9F7D8DFE0915E01F0915F010995FA01923071F0933089F0913029F488E091E082 +:2017A00022E130E019C080E090E020E030E014C08AE191E02BE130E00FC0882339F48091D9 +:2017C0003501282F30E085E391E006C080913901282F30E089E391E091838083C9010895C0 +:2017E0008091EB0081608093EB001092ED006093EC004093ED008091EE00881F8827881FE4 +:2018000008951092F4001092F0001092E8001092ED00EBEEF0E080818E7F80830895809182 +:20182000730188238CF403C08EB38823B1F08091E80082FFF9CF8091E8008B7F8093E80079 +:2018400008958EB3882349F08091E80080FFF9CF8091E8008E7F8093E80008959C0140917A +:20186000790150917A014617570718F4F90120E038C06115710511F0AB01F8CF8091E80080 +:201880008E7F8093E80040E050E0F0CF8091E80083FF02C081E008958091E80082FD2DC091 +:2018A0008EB3882381F18EB3853079F18091E80080FF17C09091F20006C081918093F1002C +:2018C000415050409F5F4115510511F09032A8F320E0903209F421E08091E8008E7F809306 +:2018E000E8004115510591F6222381F606C08EB3882349F08EB3853041F08091E80082FF85 +:20190000F6CF80E0089582E0089583E0089554D056D01EBA1092710184E089BD89B5826006 +:2019200089BD09B400FEFDCF8091D800982F9F779093D80080688093D800809163008E7FC5 +:20194000809363008091D8008F7D8093D8008091E0008E7F8093E0008091E1008E7F80932E +:20196000E1008091E20081608093E2008091E100877F8093E1008091E20088608093E20001 +:201980000895C5DF81E0809372010895C0DFE0EEF0E0808181608083E8EDF0E080818F77B4 +:2019A00080830AD00CD019BCE3E6F0E08081816080831092720108951092E20008951092A6 +:2019C000E10008951F920F920FB60F9211242F933F934F935F936F937F938F939F93AF938A +:2019E000BF93EF93FF938091E10080FF1BC08091E20080FF17C08091E1008E7F8093E100F9 +:201A00008091E2008E7F8093E2008091E20080618093E2008091D80080628093D80019BC7D +:201A20001EBA26D18091E10084FF29C08091E20084FF25C084E089BD89B5826089BD09B451 +:201A400000FEFDCF8091D8008F7D8093D8008091E1008F7E8093E1008091E2008F7E8093D6 +:201A6000E2008091E20081608093E20080917101882311F481E001C084E08EBBF9D08091DF +:201A8000E10083FF22C08091E20083FF1EC08091E100877F8093E10082E08EBB1092710103 +:201AA0008091E1008E7F8093E1008091E2008E7F8093E2008091E20080618093E200A1DEF6 +:201AC00080E060E042E28CDED3D08091E10082FF0AC08091E20082FF06C08091E1008B7FC2 +:201AE0008093E100C5D0FF91EF91BF91AF919F918F917F916F915F914F913F912F910F905E +:201B00000FBE0F901F9018951F93DF93CF9300D0CDB7DEB7E3E7F1E08091F100819381E07C +:201B2000EB37F807C9F79091730180917401853011F1863040F48130B9F0813070F08330EA +:201B400009F081C011C0883009F453C0893009F462C0863009F077C02DC0903809F474C00E +:201B6000923809F070C070C0992309F46DC0923009F069C069C0992309F065C0109175015E +:201B80008091E800877F8093E80049DE04C08EB3882309F459C08091E80080FFF8CF812F6F +:201BA0008F7711F492E001C093E09EBB80688093E3004AC09058923008F045C08091750105 +:201BC0009091760160917701AE014F5F5F4FDFDDBC010097C9F18091E800877F8093E80035 +:201BE00089819A813BDE8091E8008B7F8093E8002BC0903841F58091E800877F8093E800C6 +:201C0000809171018093F1008091E8008E7F8093E80005DE19C09923B1F4909175019230C6 +:201C200098F48091E800877F8093E80090937101F6DD80917101882311F483E001C084E0FB +:201C40008EBB16D001C040DB8091E80083FF0AC08091EB0080628093EB008091E800877F59 +:201C60008093E8000F900F90CF91DF911F91089508958EB3882329F08091E80083FF01C030 +:201C800043CF0895F999FECF92BD81BDF89A992780B50895262FF999FECF1FBA92BD81BD6B +:201CA00020BD0FB6F894FA9AF99A0FBE01960895F894FFCF01021E938220DCFB1201100123 +:201CC00000000020EB03F72F00000001000109021B0001010080320904000000FE010200E6 +:201CE0000921030000000C0001040309042003410072006400750069006E006F002000552C +:101D0000006E006F002000440046005500000000F7 +:00000001FF diff --git a/test/ardmake/hardware/firmwares/arduino-usbdfu/Arduino-usbdfu.c b/test/ardmake/hardware/firmwares/arduino-usbdfu/Arduino-usbdfu.c new file mode 100644 index 0000000..7bed831 --- /dev/null +++ b/test/ardmake/hardware/firmwares/arduino-usbdfu/Arduino-usbdfu.c @@ -0,0 +1,728 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2010. + + dean [at] fourwalledcubicle [dot] com + www.fourwalledcubicle.com +*/ + +/* + Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Main source file for the DFU class bootloader. This file contains the complete bootloader logic. + */ + +#define INCLUDE_FROM_BOOTLOADER_C +#include "Arduino-usbdfu.h" + +/** Flag to indicate if the bootloader should be running, or should exit and allow the application code to run + * via a soft reset. When cleared, the bootloader will abort, the USB interface will shut down and the application + * jumped to via an indirect jump to location 0x0000 (or other location specified by the host). + */ +bool RunBootloader = true; + +/** Flag to indicate if the bootloader is waiting to exit. When the host requests the bootloader to exit and + * jump to the application address it specifies, it sends two sequential commands which must be properly + * acknowledged. Upon reception of the first the RunBootloader flag is cleared and the WaitForExit flag is set, + * causing the bootloader to wait for the final exit command before shutting down. + */ +bool WaitForExit = false; + +/** Current DFU state machine state, one of the values in the DFU_State_t enum. */ +uint8_t DFU_State = dfuIDLE; + +/** Status code of the last executed DFU command. This is set to one of the values in the DFU_Status_t enum after + * each operation, and returned to the host when a Get Status DFU request is issued. + */ +uint8_t DFU_Status = OK; + +/** Data containing the DFU command sent from the host. */ +DFU_Command_t SentCommand; + +/** Response to the last issued Read Data DFU command. Unlike other DFU commands, the read command + * requires a single byte response from the bootloader containing the read data when the next DFU_UPLOAD command + * is issued by the host. + */ +uint8_t ResponseByte; + +/** Pointer to the start of the user application. By default this is 0x0000 (the reset vector), however the host + * may specify an alternate address when issuing the application soft-start command. + */ +AppPtr_t AppStartPtr = (AppPtr_t)0x0000; + +/** 64-bit flash page number. This is concatenated with the current 16-bit address on USB AVRs containing more than + * 64KB of flash memory. + */ +uint8_t Flash64KBPage = 0; + +/** Memory start address, indicating the current address in the memory being addressed (either FLASH or EEPROM + * depending on the issued command from the host). + */ +uint16_t StartAddr = 0x0000; + +/** Memory end address, indicating the end address to read to/write from in the memory being addressed (either FLASH + * of EEPROM depending on the issued command from the host). + */ +uint16_t EndAddr = 0x0000; + + +/** Pulse generation counters to keep track of the number of milliseconds remaining for each pulse type */ +volatile struct +{ + uint8_t TxLEDPulse; /**< Milliseconds remaining for data Tx LED pulse */ + uint8_t RxLEDPulse; /**< Milliseconds remaining for data Rx LED pulse */ + uint8_t PingPongLEDPulse; /**< Milliseconds remaining for enumeration Tx/Rx ping-pong LED pulse */ +} PulseMSRemaining; + +/** Main program entry point. This routine configures the hardware required by the bootloader, then continuously + * runs the bootloader processing routine until instructed to soft-exit, or hard-reset via the watchdog to start + * the loaded application code. + */ +int main(void) +{ + /* Configure hardware required by the bootloader */ + SetupHardware(); + + /* Enable global interrupts so that the USB stack can function */ + sei(); + + /* Run the USB management task while the bootloader is supposed to be running */ + while (RunBootloader || WaitForExit) + USB_USBTask(); + + /* Reset configured hardware back to their original states for the user application */ + ResetHardware(); + + /* Start the user application */ + AppStartPtr(); +} + +/** Configures all hardware required for the bootloader. */ +void SetupHardware(void) +{ + /* Disable watchdog if enabled by bootloader/fuses */ + MCUSR &= ~(1 << WDRF); + wdt_disable(); + + /* Disable clock division */ +// clock_prescale_set(clock_div_1); + + /* Relocate the interrupt vector table to the bootloader section */ + MCUCR = (1 << IVCE); + MCUCR = (1 << IVSEL); + + LEDs_Init(); + + /* Initialize the USB subsystem */ + USB_Init(); +} + +/** Resets all configured hardware required for the bootloader back to their original states. */ +void ResetHardware(void) +{ + /* Shut down the USB subsystem */ + USB_ShutDown(); + + /* Relocate the interrupt vector table back to the application section */ + MCUCR = (1 << IVCE); + MCUCR = 0; +} + +/** Event handler for the USB_UnhandledControlRequest event. This is used to catch standard and class specific + * control requests that are not handled internally by the USB library (including the DFU commands, which are + * all issued via the control endpoint), so that they can be handled appropriately for the application. + */ +void EVENT_USB_Device_UnhandledControlRequest(void) +{ + /* Get the size of the command and data from the wLength value */ + SentCommand.DataSize = USB_ControlRequest.wLength; + + /* Turn off TX LED(s) once the TX pulse period has elapsed */ + if (PulseMSRemaining.TxLEDPulse && !(--PulseMSRemaining.TxLEDPulse)) + LEDs_TurnOffLEDs(LEDMASK_TX); + + /* Turn off RX LED(s) once the RX pulse period has elapsed */ + if (PulseMSRemaining.RxLEDPulse && !(--PulseMSRemaining.RxLEDPulse)) + LEDs_TurnOffLEDs(LEDMASK_RX); + + switch (USB_ControlRequest.bRequest) + { + case DFU_DNLOAD: + LEDs_TurnOnLEDs(LEDMASK_RX); + PulseMSRemaining.RxLEDPulse = TX_RX_LED_PULSE_MS; + + Endpoint_ClearSETUP(); + + /* Check if bootloader is waiting to terminate */ + if (WaitForExit) + { + /* Bootloader is terminating - process last received command */ + ProcessBootloaderCommand(); + + /* Turn off TX/RX status LEDs so that they're not left on when application starts */ + LEDs_TurnOffLEDs(LEDMASK_TX); + LEDs_TurnOffLEDs(LEDMASK_RX); + + /* Indicate that the last command has now been processed - free to exit bootloader */ + WaitForExit = false; + } + + /* If the request has a data stage, load it into the command struct */ + if (SentCommand.DataSize) + { + while (!(Endpoint_IsOUTReceived())) + { + if (USB_DeviceState == DEVICE_STATE_Unattached) + return; + } + + /* First byte of the data stage is the DNLOAD request's command */ + SentCommand.Command = Endpoint_Read_Byte(); + + /* One byte of the data stage is the command, so subtract it from the total data bytes */ + SentCommand.DataSize--; + + /* Load in the rest of the data stage as command parameters */ + for (uint8_t DataByte = 0; (DataByte < sizeof(SentCommand.Data)) && + Endpoint_BytesInEndpoint(); DataByte++) + { + SentCommand.Data[DataByte] = Endpoint_Read_Byte(); + SentCommand.DataSize--; + } + + /* Process the command */ + ProcessBootloaderCommand(); + } + + /* Check if currently downloading firmware */ + if (DFU_State == dfuDNLOAD_IDLE) + { + if (!(SentCommand.DataSize)) + { + DFU_State = dfuIDLE; + } + else + { + /* Throw away the filler bytes before the start of the firmware */ + DiscardFillerBytes(DFU_FILLER_BYTES_SIZE); + + /* Throw away the packet alignment filler bytes before the start of the firmware */ + DiscardFillerBytes(StartAddr % FIXED_CONTROL_ENDPOINT_SIZE); + + /* Calculate the number of bytes remaining to be written */ + uint16_t BytesRemaining = ((EndAddr - StartAddr) + 1); + + if (IS_ONEBYTE_COMMAND(SentCommand.Data, 0x00)) // Write flash + { + /* Calculate the number of words to be written from the number of bytes to be written */ + uint16_t WordsRemaining = (BytesRemaining >> 1); + + union + { + uint16_t Words[2]; + uint32_t Long; + } CurrFlashAddress = {.Words = {StartAddr, Flash64KBPage}}; + + uint32_t CurrFlashPageStartAddress = CurrFlashAddress.Long; + uint8_t WordsInFlashPage = 0; + + while (WordsRemaining--) + { + /* Check if endpoint is empty - if so clear it and wait until ready for next packet */ + if (!(Endpoint_BytesInEndpoint())) + { + Endpoint_ClearOUT(); + + while (!(Endpoint_IsOUTReceived())) + { + if (USB_DeviceState == DEVICE_STATE_Unattached) + return; + } + } + + /* Write the next word into the current flash page */ + boot_page_fill(CurrFlashAddress.Long, Endpoint_Read_Word_LE()); + + /* Adjust counters */ + WordsInFlashPage += 1; + CurrFlashAddress.Long += 2; + + /* See if an entire page has been written to the flash page buffer */ + if ((WordsInFlashPage == (SPM_PAGESIZE >> 1)) || !(WordsRemaining)) + { + /* Commit the flash page to memory */ + boot_page_write(CurrFlashPageStartAddress); + boot_spm_busy_wait(); + + /* Check if programming incomplete */ + if (WordsRemaining) + { + CurrFlashPageStartAddress = CurrFlashAddress.Long; + WordsInFlashPage = 0; + + /* Erase next page's temp buffer */ + boot_page_erase(CurrFlashAddress.Long); + boot_spm_busy_wait(); + } + } + } + + /* Once programming complete, start address equals the end address */ + StartAddr = EndAddr; + + /* Re-enable the RWW section of flash */ + boot_rww_enable(); + } + else // Write EEPROM + { + while (BytesRemaining--) + { + /* Check if endpoint is empty - if so clear it and wait until ready for next packet */ + if (!(Endpoint_BytesInEndpoint())) + { + Endpoint_ClearOUT(); + + while (!(Endpoint_IsOUTReceived())) + { + if (USB_DeviceState == DEVICE_STATE_Unattached) + return; + } + } + + /* Read the byte from the USB interface and write to to the EEPROM */ + eeprom_write_byte((uint8_t*)StartAddr, Endpoint_Read_Byte()); + + /* Adjust counters */ + StartAddr++; + } + } + + /* Throw away the currently unused DFU file suffix */ + DiscardFillerBytes(DFU_FILE_SUFFIX_SIZE); + } + } + + Endpoint_ClearOUT(); + + Endpoint_ClearStatusStage(); + + break; + case DFU_UPLOAD: + Endpoint_ClearSETUP(); + + LEDs_TurnOnLEDs(LEDMASK_TX); + PulseMSRemaining.TxLEDPulse = TX_RX_LED_PULSE_MS; + + while (!(Endpoint_IsINReady())) + { + if (USB_DeviceState == DEVICE_STATE_Unattached) + return; + } + + if (DFU_State != dfuUPLOAD_IDLE) + { + if ((DFU_State == dfuERROR) && IS_ONEBYTE_COMMAND(SentCommand.Data, 0x01)) // Blank Check + { + /* Blank checking is performed in the DFU_DNLOAD request - if we get here we've told the host + that the memory isn't blank, and the host is requesting the first non-blank address */ + Endpoint_Write_Word_LE(StartAddr); + } + else + { + /* Idle state upload - send response to last issued command */ + Endpoint_Write_Byte(ResponseByte); + } + } + else + { + /* Determine the number of bytes remaining in the current block */ + uint16_t BytesRemaining = ((EndAddr - StartAddr) + 1); + + if (IS_ONEBYTE_COMMAND(SentCommand.Data, 0x00)) // Read FLASH + { + /* Calculate the number of words to be written from the number of bytes to be written */ + uint16_t WordsRemaining = (BytesRemaining >> 1); + + union + { + uint16_t Words[2]; + uint32_t Long; + } CurrFlashAddress = {.Words = {StartAddr, Flash64KBPage}}; + + while (WordsRemaining--) + { + /* Check if endpoint is full - if so clear it and wait until ready for next packet */ + if (Endpoint_BytesInEndpoint() == FIXED_CONTROL_ENDPOINT_SIZE) + { + Endpoint_ClearIN(); + + while (!(Endpoint_IsINReady())) + { + if (USB_DeviceState == DEVICE_STATE_Unattached) + return; + } + } + + /* Read the flash word and send it via USB to the host */ + #if (FLASHEND > 0xFFFF) + Endpoint_Write_Word_LE(pgm_read_word_far(CurrFlashAddress.Long)); + #else + Endpoint_Write_Word_LE(pgm_read_word(CurrFlashAddress.Long)); + #endif + + /* Adjust counters */ + CurrFlashAddress.Long += 2; + } + + /* Once reading is complete, start address equals the end address */ + StartAddr = EndAddr; + } + else if (IS_ONEBYTE_COMMAND(SentCommand.Data, 0x02)) // Read EEPROM + { + while (BytesRemaining--) + { + /* Check if endpoint is full - if so clear it and wait until ready for next packet */ + if (Endpoint_BytesInEndpoint() == FIXED_CONTROL_ENDPOINT_SIZE) + { + Endpoint_ClearIN(); + + while (!(Endpoint_IsINReady())) + { + if (USB_DeviceState == DEVICE_STATE_Unattached) + return; + } + } + + /* Read the EEPROM byte and send it via USB to the host */ + Endpoint_Write_Byte(eeprom_read_byte((uint8_t*)StartAddr)); + + /* Adjust counters */ + StartAddr++; + } + } + + /* Return to idle state */ + DFU_State = dfuIDLE; + } + + Endpoint_ClearIN(); + + Endpoint_ClearStatusStage(); + break; + case DFU_GETSTATUS: + Endpoint_ClearSETUP(); + + /* Write 8-bit status value */ + Endpoint_Write_Byte(DFU_Status); + + /* Write 24-bit poll timeout value */ + Endpoint_Write_Byte(0); + Endpoint_Write_Word_LE(0); + + /* Write 8-bit state value */ + Endpoint_Write_Byte(DFU_State); + + /* Write 8-bit state string ID number */ + Endpoint_Write_Byte(0); + + Endpoint_ClearIN(); + + Endpoint_ClearStatusStage(); + break; + case DFU_CLRSTATUS: + Endpoint_ClearSETUP(); + + /* Reset the status value variable to the default OK status */ + DFU_Status = OK; + + Endpoint_ClearStatusStage(); + break; + case DFU_GETSTATE: + Endpoint_ClearSETUP(); + + /* Write the current device state to the endpoint */ + Endpoint_Write_Byte(DFU_State); + + Endpoint_ClearIN(); + + Endpoint_ClearStatusStage(); + break; + case DFU_ABORT: + Endpoint_ClearSETUP(); + + /* Turn off TX/RX status LEDs so that they're not left on when application starts */ + LEDs_TurnOffLEDs(LEDMASK_TX); + LEDs_TurnOffLEDs(LEDMASK_RX); + + /* Reset the current state variable to the default idle state */ + DFU_State = dfuIDLE; + + Endpoint_ClearStatusStage(); + break; + } +} + +/** Routine to discard the specified number of bytes from the control endpoint stream. This is used to + * discard unused bytes in the stream from the host, including the memory program block suffix. + * + * \param[in] NumberOfBytes Number of bytes to discard from the host from the control endpoint + */ +static void DiscardFillerBytes(uint8_t NumberOfBytes) +{ + while (NumberOfBytes--) + { + if (!(Endpoint_BytesInEndpoint())) + { + Endpoint_ClearOUT(); + + /* Wait until next data packet received */ + while (!(Endpoint_IsOUTReceived())) + { + if (USB_DeviceState == DEVICE_STATE_Unattached) + return; + } + } + else + { + Endpoint_Discard_Byte(); + } + } +} + +/** Routine to process an issued command from the host, via a DFU_DNLOAD request wrapper. This routine ensures + * that the command is allowed based on the current secure mode flag value, and passes the command off to the + * appropriate handler function. + */ +static void ProcessBootloaderCommand(void) +{ + /* Check if device is in secure mode */ +// if (IsSecure) +// { +// /* Don't process command unless it is a READ or chip erase command */ +// if (!(((SentCommand.Command == COMMAND_WRITE) && +// IS_TWOBYTE_COMMAND(SentCommand.Data, 0x00, 0xFF)) || +// (SentCommand.Command == COMMAND_READ))) +// { +// /* Set the state and status variables to indicate the error */ +// DFU_State = dfuERROR; +// DFU_Status = errWRITE; +// +// /* Stall command */ +// Endpoint_StallTransaction(); +// +// /* Don't process the command */ +// return; +// } +// } + + /* Dispatch the required command processing routine based on the command type */ + switch (SentCommand.Command) + { + case COMMAND_PROG_START: + ProcessMemProgCommand(); + break; + case COMMAND_DISP_DATA: + ProcessMemReadCommand(); + break; + case COMMAND_WRITE: + ProcessWriteCommand(); + break; + case COMMAND_READ: + ProcessReadCommand(); + break; + case COMMAND_CHANGE_BASE_ADDR: + if (IS_TWOBYTE_COMMAND(SentCommand.Data, 0x03, 0x00)) // Set 64KB flash page command + Flash64KBPage = SentCommand.Data[2]; + break; + } +} + +/** Routine to concatenate the given pair of 16-bit memory start and end addresses from the host, and store them + * in the StartAddr and EndAddr global variables. + */ +static void LoadStartEndAddresses(void) +{ + union + { + uint8_t Bytes[2]; + uint16_t Word; + } Address[2] = {{.Bytes = {SentCommand.Data[2], SentCommand.Data[1]}}, + {.Bytes = {SentCommand.Data[4], SentCommand.Data[3]}}}; + + /* Load in the start and ending read addresses from the sent data packet */ + StartAddr = Address[0].Word; + EndAddr = Address[1].Word; +} + +/** Handler for a Memory Program command issued by the host. This routine handles the preparations needed + * to write subsequent data from the host into the specified memory. + */ +static void ProcessMemProgCommand(void) +{ + if (IS_ONEBYTE_COMMAND(SentCommand.Data, 0x00) || // Write FLASH command + IS_ONEBYTE_COMMAND(SentCommand.Data, 0x01)) // Write EEPROM command + { + /* Load in the start and ending read addresses */ + LoadStartEndAddresses(); + + /* If FLASH is being written to, we need to pre-erase the first page to write to */ + if (IS_ONEBYTE_COMMAND(SentCommand.Data, 0x00)) + { + union + { + uint16_t Words[2]; + uint32_t Long; + } CurrFlashAddress = {.Words = {StartAddr, Flash64KBPage}}; + + /* Erase the current page's temp buffer */ + boot_page_erase(CurrFlashAddress.Long); + boot_spm_busy_wait(); + } + + /* Set the state so that the next DNLOAD requests reads in the firmware */ + DFU_State = dfuDNLOAD_IDLE; + } +} + +/** Handler for a Memory Read command issued by the host. This routine handles the preparations needed + * to read subsequent data from the specified memory out to the host, as well as implementing the memory + * blank check command. + */ +static void ProcessMemReadCommand(void) +{ + if (IS_ONEBYTE_COMMAND(SentCommand.Data, 0x00) || // Read FLASH command + IS_ONEBYTE_COMMAND(SentCommand.Data, 0x02)) // Read EEPROM command + { + /* Load in the start and ending read addresses */ + LoadStartEndAddresses(); + + /* Set the state so that the next UPLOAD requests read out the firmware */ + DFU_State = dfuUPLOAD_IDLE; + } + else if (IS_ONEBYTE_COMMAND(SentCommand.Data, 0x01)) // Blank check FLASH command + { + uint32_t CurrFlashAddress = 0; + + while (CurrFlashAddress < BOOT_START_ADDR) + { + /* Check if the current byte is not blank */ + #if (FLASHEND > 0xFFFF) + if (pgm_read_byte_far(CurrFlashAddress) != 0xFF) + #else + if (pgm_read_byte(CurrFlashAddress) != 0xFF) + #endif + { + /* Save the location of the first non-blank byte for response back to the host */ + Flash64KBPage = (CurrFlashAddress >> 16); + StartAddr = CurrFlashAddress; + + /* Set state and status variables to the appropriate error values */ + DFU_State = dfuERROR; + DFU_Status = errCHECK_ERASED; + + break; + } + + CurrFlashAddress++; + } + } +} + +/** Handler for a Data Write command issued by the host. This routine handles non-programming commands such as + * bootloader exit (both via software jumps and hardware watchdog resets) and flash memory erasure. + */ +static void ProcessWriteCommand(void) +{ + if (IS_ONEBYTE_COMMAND(SentCommand.Data, 0x03)) // Start application + { + /* Indicate that the bootloader is terminating */ + WaitForExit = true; + + /* Check if data supplied for the Start Program command - no data executes the program */ + if (SentCommand.DataSize) + { + if (SentCommand.Data[1] == 0x01) // Start via jump + { + union + { + uint8_t Bytes[2]; + AppPtr_t FuncPtr; + } Address = {.Bytes = {SentCommand.Data[4], SentCommand.Data[3]}}; + + /* Load in the jump address into the application start address pointer */ + AppStartPtr = Address.FuncPtr; + } + } + else + { + if (SentCommand.Data[1] == 0x00) // Start via watchdog + { + /* Start the watchdog to reset the AVR once the communications are finalized */ + wdt_enable(WDTO_250MS); + } + else // Start via jump + { + /* Set the flag to terminate the bootloader at next opportunity */ + RunBootloader = false; + } + } + } + else if (IS_TWOBYTE_COMMAND(SentCommand.Data, 0x00, 0xFF)) // Erase flash + { + uint32_t CurrFlashAddress = 0; + + /* Clear the application section of flash */ + while (CurrFlashAddress < BOOT_START_ADDR) + { + boot_page_erase(CurrFlashAddress); + boot_spm_busy_wait(); + boot_page_write(CurrFlashAddress); + boot_spm_busy_wait(); + + CurrFlashAddress += SPM_PAGESIZE; + } + + /* Re-enable the RWW section of flash as writing to the flash locks it out */ + boot_rww_enable(); + + /* Memory has been erased, reset the security bit so that programming/reading is allowed */ +// IsSecure = false; + } +} + +/** Handler for a Data Read command issued by the host. This routine handles bootloader information retrieval + * commands such as device signature and bootloader version retrieval. + */ +static void ProcessReadCommand(void) +{ + const uint8_t BootloaderInfo[3] = {BOOTLOADER_VERSION, BOOTLOADER_ID_BYTE1, BOOTLOADER_ID_BYTE2}; + const uint8_t SignatureInfo[3] = {AVR_SIGNATURE_1, AVR_SIGNATURE_2, AVR_SIGNATURE_3}; + + uint8_t DataIndexToRead = SentCommand.Data[1]; + + if (IS_ONEBYTE_COMMAND(SentCommand.Data, 0x00)) // Read bootloader info + ResponseByte = BootloaderInfo[DataIndexToRead]; + else if (IS_ONEBYTE_COMMAND(SentCommand.Data, 0x01)) // Read signature byte + ResponseByte = SignatureInfo[DataIndexToRead - 0x30]; +} diff --git a/test/ardmake/hardware/firmwares/arduino-usbdfu/Arduino-usbdfu.h b/test/ardmake/hardware/firmwares/arduino-usbdfu/Arduino-usbdfu.h new file mode 100644 index 0000000..4fb236e --- /dev/null +++ b/test/ardmake/hardware/firmwares/arduino-usbdfu/Arduino-usbdfu.h @@ -0,0 +1,220 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2010. + + dean [at] fourwalledcubicle [dot] com + www.fourwalledcubicle.com +*/ + +/* + Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Header file for Arduino-usbdfu.c. + */ + +#ifndef _ARDUINO_USB_DFU_BOOTLOADER_H_ +#define _ARDUINO_USB_DFU_BOOTLOADER_H_ + + /* Includes: */ + #include + #include + #include + #include + #include + #include + #include + #include + + #include "Descriptors.h" + + #include + #include + + /* Macros: */ + /** LED mask for the library LED driver, to indicate TX activity. */ + #define LEDMASK_TX LEDS_LED1 + + /** LED mask for the library LED driver, to indicate RX activity. */ + #define LEDMASK_RX LEDS_LED2 + + /** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */ + #define LEDMASK_ERROR (LEDS_LED1 | LEDS_LED2) + + /** LED mask for the library LED driver, to indicate that the USB interface is busy. */ + #define LEDMASK_BUSY (LEDS_LED1 | LEDS_LED2) + + /** Configuration define. Define this token to true to case the bootloader to reject all memory commands + * until a memory erase has been performed. When used in conjunction with the lockbits of the AVR, this + * can protect the AVR's firmware from being dumped from a secured AVR. When false, memory operations are + * allowed at any time. + */ +// #define SECURE_MODE false + + /** Major bootloader version number. */ + #define BOOTLOADER_VERSION_MINOR 2 + + /** Minor bootloader version number. */ + #define BOOTLOADER_VERSION_REV 0 + + /** Complete bootloader version number expressed as a packed byte, constructed from the + * two individual bootloader version macros. + */ + #define BOOTLOADER_VERSION ((BOOTLOADER_VERSION_MINOR << 4) | BOOTLOADER_VERSION_REV) + + /** First byte of the bootloader identification bytes, used to identify a device's bootloader. */ + #define BOOTLOADER_ID_BYTE1 0xDC + + /** Second byte of the bootloader identification bytes, used to identify a device's bootloader. */ + #define BOOTLOADER_ID_BYTE2 0xFB + + /** Convenience macro, used to determine if the issued command is the given one-byte long command. + * + * \param[in] dataarr Command byte array to check against + * \param[in] cb1 First command byte to check + */ + #define IS_ONEBYTE_COMMAND(dataarr, cb1) (dataarr[0] == (cb1)) + + /** Convenience macro, used to determine if the issued command is the given two-byte long command. + * + * \param[in] dataarr Command byte array to check against + * \param[in] cb1 First command byte to check + * \param[in] cb2 Second command byte to check + */ + #define IS_TWOBYTE_COMMAND(dataarr, cb1, cb2) ((dataarr[0] == (cb1)) && (dataarr[1] == (cb2))) + + /** Length of the DFU file suffix block, appended to the end of each complete memory write command. + * The DFU file suffix is currently unused (but is designed to give extra file information, such as + * a CRC of the complete firmware for error checking) and so is discarded. + */ + #define DFU_FILE_SUFFIX_SIZE 16 + + /** Length of the DFU file filler block, appended to the start of each complete memory write command. + * Filler bytes are added to the start of each complete memory write command, and must be discarded. + */ + #define DFU_FILLER_BYTES_SIZE 26 + + /** DFU class command request to detach from the host. */ + #define DFU_DETATCH 0x00 + + /** DFU class command request to send data from the host to the bootloader. */ + #define DFU_DNLOAD 0x01 + + /** DFU class command request to send data from the bootloader to the host. */ + #define DFU_UPLOAD 0x02 + + /** DFU class command request to get the current DFU status and state from the bootloader. */ + #define DFU_GETSTATUS 0x03 + + /** DFU class command request to reset the current DFU status and state variables to their defaults. */ + #define DFU_CLRSTATUS 0x04 + + /** DFU class command request to get the current DFU state of the bootloader. */ + #define DFU_GETSTATE 0x05 + + /** DFU class command request to abort the current multi-request transfer and return to the dfuIDLE state. */ + #define DFU_ABORT 0x06 + + /** DFU command to begin programming the device's memory. */ + #define COMMAND_PROG_START 0x01 + + /** DFU command to begin reading the device's memory. */ + #define COMMAND_DISP_DATA 0x03 + + /** DFU command to issue a write command. */ + #define COMMAND_WRITE 0x04 + + /** DFU command to issue a read command. */ + #define COMMAND_READ 0x05 + + /** DFU command to issue a memory base address change command, to set the current 64KB flash page + * that subsequent flash operations should use. */ + #define COMMAND_CHANGE_BASE_ADDR 0x06 + + /* Type Defines: */ + /** Type define for a non-returning function pointer to the loaded application. */ + typedef void (*AppPtr_t)(void) ATTR_NO_RETURN; + + /** Type define for a structure containing a complete DFU command issued by the host. */ + typedef struct + { + uint8_t Command; /**< Single byte command to perform, one of the COMMAND_* macro values */ + uint8_t Data[5]; /**< Command parameters */ + uint16_t DataSize; /**< Size of the command parameters */ + } DFU_Command_t; + + /* Enums: */ + /** DFU bootloader states. Refer to the DFU class specification for information on each state. */ + enum DFU_State_t + { + appIDLE = 0, + appDETACH = 1, + dfuIDLE = 2, + dfuDNLOAD_SYNC = 3, + dfuDNBUSY = 4, + dfuDNLOAD_IDLE = 5, + dfuMANIFEST_SYNC = 6, + dfuMANIFEST = 7, + dfuMANIFEST_WAIT_RESET = 8, + dfuUPLOAD_IDLE = 9, + dfuERROR = 10 + }; + + /** DFU command status error codes. Refer to the DFU class specification for information on each error code. */ + enum DFU_Status_t + { + OK = 0, + errTARGET = 1, + errFILE = 2, + errWRITE = 3, + errERASE = 4, + errCHECK_ERASED = 5, + errPROG = 6, + errVERIFY = 7, + errADDRESS = 8, + errNOTDONE = 9, + errFIRMWARE = 10, + errVENDOR = 11, + errUSBR = 12, + errPOR = 13, + errUNKNOWN = 14, + errSTALLEDPKT = 15 + }; + + /* Function Prototypes: */ + void SetupHardware(void); + void ResetHardware(void); + + void EVENT_USB_Device_UnhandledControlRequest(void); + + #if defined(INCLUDE_FROM_BOOTLOADER_C) + static void DiscardFillerBytes(uint8_t NumberOfBytes); + static void ProcessBootloaderCommand(void); + static void LoadStartEndAddresses(void); + static void ProcessMemProgCommand(void); + static void ProcessMemReadCommand(void); + static void ProcessWriteCommand(void); + static void ProcessReadCommand(void); + #endif + +#endif /* _ARDUINO_USB_DFU_BOOTLOADER_H_ */ diff --git a/test/ardmake/hardware/firmwares/arduino-usbdfu/Board/LEDs.h b/test/ardmake/hardware/firmwares/arduino-usbdfu/Board/LEDs.h new file mode 100644 index 0000000..152e8f5 --- /dev/null +++ b/test/ardmake/hardware/firmwares/arduino-usbdfu/Board/LEDs.h @@ -0,0 +1,110 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2010. + + dean [at] fourwalledcubicle [dot] com + www.fourwalledcubicle.com +*/ + +/* + Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/* + Board LEDs driver for the Benito board, from www.dorkbotpdx.org. +*/ + +#ifndef __LEDS_ARDUINOUNO_H__ +#define __LEDS_ARDUINOUNO_H__ + + /* Includes: */ + #include + +/* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(INCLUDE_FROM_LEDS_H) + #error Do not include this file directly. Include LUFA/Drivers/Board/LEDS.h instead. + #endif + + /* Public Interface - May be used in end-application: */ + /* Macros: */ + /** LED mask for the first LED on the board. */ + #define LEDS_LED1 (1 << 5) + + /** LED mask for the second LED on the board. */ + #define LEDS_LED2 (1 << 4) + + /** LED mask for all the LEDs on the board. */ + #define LEDS_ALL_LEDS (LEDS_LED1 | LEDS_LED2) + + /** LED mask for the none of the board LEDs */ + #define LEDS_NO_LEDS 0 + + /* Inline Functions: */ + #if !defined(__DOXYGEN__) + static inline void LEDs_Init(void) + { + DDRD |= LEDS_ALL_LEDS; + PORTD |= LEDS_ALL_LEDS; + } + + static inline void LEDs_TurnOnLEDs(const uint8_t LEDMask) + { + PORTD &= ~LEDMask; + } + + static inline void LEDs_TurnOffLEDs(const uint8_t LEDMask) + { + PORTD |= LEDMask; + } + + static inline void LEDs_SetAllLEDs(const uint8_t LEDMask) + { + PORTD = ((PORTD | LEDS_ALL_LEDS) & ~LEDMask); + } + + static inline void LEDs_ChangeLEDs(const uint8_t LEDMask, const uint8_t ActiveMask) + { + PORTD = ((PORTD | ActiveMask) & ~LEDMask); + } + + static inline void LEDs_ToggleLEDs(const uint8_t LEDMask) + { + PORTD ^= LEDMask; + } + + static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT; + static inline uint8_t LEDs_GetLEDs(void) + { + return (PORTD & LEDS_ALL_LEDS); + } + #endif + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif diff --git a/test/ardmake/hardware/firmwares/arduino-usbdfu/Descriptors.c b/test/ardmake/hardware/firmwares/arduino-usbdfu/Descriptors.c new file mode 100644 index 0000000..4deaa06 --- /dev/null +++ b/test/ardmake/hardware/firmwares/arduino-usbdfu/Descriptors.c @@ -0,0 +1,189 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2010. + + dean [at] fourwalledcubicle [dot] com + www.fourwalledcubicle.com +*/ + +/* + Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * USB Device Descriptors, for library use when in USB device mode. Descriptors are special + * computer-readable structures which the host requests upon device enumeration, to determine + * the device's capabilities and functions. + */ + +#include "Descriptors.h" + +/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall + * device characteristics, including the supported USB version, control endpoint size and the + * number of device configurations. The descriptor is read out by the USB host when the enumeration + * process begins. + */ +USB_Descriptor_Device_t DeviceDescriptor = +{ + .Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device}, + + .USBSpecification = VERSION_BCD(01.10), + .Class = 0x00, + .SubClass = 0x00, + .Protocol = 0x00, + + .Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE, + + .VendorID = 0x03EB, // Atmel + .ProductID = PRODUCT_ID_CODE, // MCU-dependent + .ReleaseNumber = 0x0000, + + .ManufacturerStrIndex = NO_DESCRIPTOR, + .ProductStrIndex = 0x01, + .SerialNumStrIndex = NO_DESCRIPTOR, + + .NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS +}; + +/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage + * of the device in one of its supported configurations, including information about any device interfaces + * and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting + * a configuration so that the host may correctly communicate with the USB device. + */ +USB_Descriptor_Configuration_t ConfigurationDescriptor = +{ + .Config = + { + .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration}, + + .TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t), + .TotalInterfaces = 1, + + .ConfigurationNumber = 1, + .ConfigurationStrIndex = NO_DESCRIPTOR, + + .ConfigAttributes = USB_CONFIG_ATTR_BUSPOWERED, + + .MaxPowerConsumption = USB_CONFIG_POWER_MA(100) + }, + + .DFU_Interface = + { + .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, + + .InterfaceNumber = 0, + .AlternateSetting = 0, + + .TotalEndpoints = 0, + + .Class = 0xFE, + .SubClass = 0x01, + .Protocol = 0x02, + + .InterfaceStrIndex = NO_DESCRIPTOR + }, + + .DFU_Functional = + { + .Header = {.Size = sizeof(USB_DFU_Functional_Descriptor_t), .Type = DTYPE_DFUFunctional}, + + .Attributes = (ATTR_CAN_UPLOAD | ATTR_CAN_DOWNLOAD), + + .DetachTimeout = 0x0000, + .TransferSize = 0x0c00, + + .DFUSpecification = VERSION_BCD(01.01) + } +}; + +/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests + * the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate + * via the language ID table available at USB.org what languages the device supports for its string descriptors. + */ +USB_Descriptor_String_t LanguageString = +{ + .Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String}, + + .UnicodeString = {LANGUAGE_ID_ENG} +}; + +/** Product descriptor string. This is a Unicode string containing the product's details in human readable form, + * and is read out upon request by the host when the appropriate string ID is requested, listed in the Device + * Descriptor. + */ +USB_Descriptor_String_t ProductString = +{ + #if (ARDUINO_MODEL_PID == ARDUINO_UNO_PID) + .Header = {.Size = USB_STRING_LEN(15), .Type = DTYPE_String}, + + .UnicodeString = L"Arduino Uno DFU" + #elif (ARDUINO_MODEL_PID == ARDUINO_MEGA2560_PID) + .Header = {.Size = USB_STRING_LEN(21), .Type = DTYPE_String}, + + .UnicodeString = L"Arduino Mega 2560 DFU" + #endif +}; + +/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors" + * documentation) by the application code so that the address and size of a requested descriptor can be given + * to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function + * is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the + * USB host. + */ +uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, + const uint8_t wIndex, + void** const DescriptorAddress) +{ + const uint8_t DescriptorType = (wValue >> 8); + const uint8_t DescriptorNumber = (wValue & 0xFF); + + void* Address = NULL; + uint16_t Size = NO_DESCRIPTOR; + + switch (DescriptorType) + { + case DTYPE_Device: + Address = &DeviceDescriptor; + Size = sizeof(USB_Descriptor_Device_t); + break; + case DTYPE_Configuration: + Address = &ConfigurationDescriptor; + Size = sizeof(USB_Descriptor_Configuration_t); + break; + case DTYPE_String: + if (!(DescriptorNumber)) + { + Address = &LanguageString; + Size = LanguageString.Header.Size; + } + else + { + Address = &ProductString; + Size = ProductString.Header.Size; + } + + break; + } + + *DescriptorAddress = Address; + return Size; +} diff --git a/test/ardmake/hardware/firmwares/arduino-usbdfu/Descriptors.h b/test/ardmake/hardware/firmwares/arduino-usbdfu/Descriptors.h new file mode 100644 index 0000000..6c93f20 --- /dev/null +++ b/test/ardmake/hardware/firmwares/arduino-usbdfu/Descriptors.h @@ -0,0 +1,177 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2010. + + dean [at] fourwalledcubicle [dot] com + www.fourwalledcubicle.com +*/ + +/* + Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Header file for Descriptors.c. + */ + +#ifndef _DESCRIPTORS_H_ +#define _DESCRIPTORS_H_ + + /* Includes: */ + #include + + /* Product-specific definitions: */ + #define ARDUINO_UNO_PID 0x0001 + #define ARDUINO_MEGA2560_PID 0x0010 + + /* Macros: */ + /** Descriptor type value for a DFU class functional descriptor. */ + #define DTYPE_DFUFunctional 0x21 + + /** DFU attribute mask, indicating that the DFU device will detach and re-attach when a DFU_DETACH + * command is issued, rather than the host issuing a USB Reset. + */ + #define ATTR_WILL_DETATCH (1 << 3) + + /** DFU attribute mask, indicating that the DFU device can communicate during the manifestation phase + * (memory programming phase). + */ + #define ATTR_MANEFESTATION_TOLLERANT (1 << 2) + + /** DFU attribute mask, indicating that the DFU device can accept DFU_UPLOAD requests to send data from + * the device to the host. + */ + #define ATTR_CAN_UPLOAD (1 << 1) + + /** DFU attribute mask, indicating that the DFU device can accept DFU_DNLOAD requests to send data from + * the host to the device. + */ + #define ATTR_CAN_DOWNLOAD (1 << 0) + + #if defined(__AVR_AT90USB1287__) + #define PRODUCT_ID_CODE 0x2FFB + #define AVR_SIGNATURE_1 0x1E + #define AVR_SIGNATURE_2 0x97 + #define AVR_SIGNATURE_3 0x82 + #elif defined(__AVR_AT90USB1286__) + #define PRODUCT_ID_CODE 0x2FFB + #define AVR_SIGNATURE_1 0x1E + #define AVR_SIGNATURE_2 0x97 + #define AVR_SIGNATURE_3 0x82 + #elif defined(__AVR_AT90USB647__) + #define PRODUCT_ID_CODE 0x2FF9 + #define AVR_SIGNATURE_1 0x1E + #define AVR_SIGNATURE_2 0x96 + #define AVR_SIGNATURE_3 0x82 + #elif defined(__AVR_AT90USB646__) + #define PRODUCT_ID_CODE 0x2FF9 + #define AVR_SIGNATURE_1 0x1E + #define AVR_SIGNATURE_2 0x96 + #define AVR_SIGNATURE_3 0x82 + #elif defined(__AVR_ATmega32U6__) + #define PRODUCT_ID_CODE 0x2FFB + #define AVR_SIGNATURE_1 0x1E + #define AVR_SIGNATURE_2 0x95 + #define AVR_SIGNATURE_3 0x88 + #elif defined(__AVR_ATmega32U4__) + #define PRODUCT_ID_CODE 0x2FF4 + #define AVR_SIGNATURE_1 0x1E + #define AVR_SIGNATURE_2 0x95 + #define AVR_SIGNATURE_3 0x87 + #elif defined(__AVR_ATmega32U2__) + #define PRODUCT_ID_CODE 0x2FF0 + #define AVR_SIGNATURE_1 0x1E + #define AVR_SIGNATURE_2 0x95 + #define AVR_SIGNATURE_3 0x8A + #elif defined(__AVR_ATmega16U4__) + #define PRODUCT_ID_CODE 0x2FF3 + #define AVR_SIGNATURE_1 0x1E + #define AVR_SIGNATURE_2 0x94 + #define AVR_SIGNATURE_3 0x88 + #elif defined(__AVR_ATmega16U2__) + #define PRODUCT_ID_CODE 0x2FEF + #define AVR_SIGNATURE_1 0x1E + #define AVR_SIGNATURE_2 0x94 + #define AVR_SIGNATURE_3 0x89 + #elif defined(__AVR_AT90USB162__) + #define PRODUCT_ID_CODE 0x2FFA + #define AVR_SIGNATURE_1 0x1E + #define AVR_SIGNATURE_2 0x94 + #define AVR_SIGNATURE_3 0x82 + #elif defined(__AVR_AT90USB82__) + #define PRODUCT_ID_CODE 0x2FEE + #define AVR_SIGNATURE_1 0x1E + #define AVR_SIGNATURE_2 0x93 + #define AVR_SIGNATURE_3 0x89 + #elif defined(__AVR_ATmega8U2__) + #define PRODUCT_ID_CODE 0x2FF7 + #define AVR_SIGNATURE_1 0x1E + #define AVR_SIGNATURE_2 0x93 + #define AVR_SIGNATURE_3 0x82 + #else + #error The selected AVR part is not currently supported by this bootloader. + #endif + + #if !defined(PRODUCT_ID_CODE) + #error Current AVR model is not supported by this bootloader. + #endif + + /* Type Defines: */ + /** Type define for a DFU class function descriptor. This descriptor gives DFU class information + * to the host when read, indicating the DFU device's capabilities. + */ + typedef struct + { + USB_Descriptor_Header_t Header; /**< Standard descriptor header structure */ + + uint8_t Attributes; /**< DFU device attributes, a mask comprising of the + * ATTR_* macros listed in this source file + */ + uint16_t DetachTimeout; /**< Timeout in milliseconds between a USB_DETACH + * command being issued and the device detaching + * from the USB bus + */ + uint16_t TransferSize; /**< Maximum number of bytes the DFU device can accept + * from the host in a transaction + */ + uint16_t DFUSpecification; /**< BCD packed DFU specification number this DFU + * device complies with + */ + } USB_DFU_Functional_Descriptor_t; + + /** Type define for the device configuration descriptor structure. This must be defined in the + * application code, as the configuration descriptor contains several sub-descriptors which + * vary between devices, and which describe the device's usage to the host. + */ + typedef struct + { + USB_Descriptor_Configuration_Header_t Config; + USB_Descriptor_Interface_t DFU_Interface; + USB_DFU_Functional_Descriptor_t DFU_Functional; + } USB_Descriptor_Configuration_t; + + /* Function Prototypes: */ + uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, + const uint8_t wIndex, + void** const DescriptorAddress) ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3); + +#endif diff --git a/test/ardmake/hardware/firmwares/arduino-usbdfu/makefile b/test/ardmake/hardware/firmwares/arduino-usbdfu/makefile new file mode 100644 index 0000000..1fb4ed3 --- /dev/null +++ b/test/ardmake/hardware/firmwares/arduino-usbdfu/makefile @@ -0,0 +1,710 @@ +# Hey Emacs, this is a -*- makefile -*- +#---------------------------------------------------------------------------- +# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al. +# >> Modified for use with the LUFA project. << +# +# Released to the Public Domain +# +# Additional material for this makefile was written by: +# Peter Fleury +# Tim Henigan +# Colin O'Flynn +# Reiner Patommel +# Markus Pfaff +# Sander Pool +# Frederik Rouleau +# Carlos Lamas +# Dean Camera +# Opendous Inc. +# Denver Gingerich +# +#---------------------------------------------------------------------------- +# On command line: +# +# make all = Make software. +# +# make clean = Clean out built project files. +# +# make coff = Convert ELF to AVR COFF. +# +# make extcoff = Convert ELF to AVR Extended COFF. +# +# make program = Download the hex file to the device, using avrdude. +# Please customize the avrdude settings below first! +# +# make doxygen = Generate DoxyGen documentation for the project (must have +# DoxyGen installed) +# +# make debug = Start either simulavr or avarice as specified for debugging, +# with avr-gdb or avr-insight as the front end for debugging. +# +# make filename.s = Just compile filename.c into the assembler code only. +# +# make filename.i = Create a preprocessed source file for use in submitting +# bug reports to the GCC project. +# +# To rebuild project do "make clean" then "make all". +#---------------------------------------------------------------------------- + + +# MCU name +MCU = atmega8u2 +MCU_AVRDUDE = at90usb82 + +# Specify the Arduino model using the assigned PID. This is used by Descriptors.c +# to set the product descriptor string (for DFU we must use the PID for each +# chip that dfu-bootloader or Flip expect) +# Uno PID: +ARDUINO_MODEL_PID = 0x0001 +# Mega 2560 PID: +#ARDUINO_MODEL_PID = 0x0010 + +# Target board (see library "Board Types" documentation, NONE for projects not requiring +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# "Board" inside the application directory. +BOARD = USER + + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_CLOCK below, as it is sourced by +# F_CLOCK after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# Input clock frequency. +# This will define a symbol, F_CLOCK, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_CLOCK = $(F_CPU) + + +# Starting byte address of the bootloader, as a byte address - computed via the formula +# BOOT_START = ((TOTAL_FLASH_BYTES - BOOTLOADER_SECTION_SIZE_BYTES) * 1024) +# +# Note that the bootloader size and start address given in AVRStudio is in words and not +# bytes, and so will need to be doubled to obtain the byte address needed by AVR-GCC. +BOOT_START = 0x1000 + + +# Output format. (can be srec, ihex, binary) +FORMAT = ihex + + +# Target file name (without extension). +TARGET = Arduino-usbdfu + + +# Object files directory +# To put object files in current directory, use a dot (.), do NOT make +# this an empty or blank macro! +OBJDIR = . + + +# Path to the LUFA library +LUFA_PATH = ../.. + + +# LUFA library compile-time options and predefined tokens +LUFA_OPTS = -D USB_DEVICE_ONLY +LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0 +LUFA_OPTS += -D CONTROL_ONLY_DEVICE +LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=32 +LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 +LUFA_OPTS += -D USE_RAM_DESCRIPTORS +LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" +LUFA_OPTS += -D NO_INTERNAL_SERIAL +LUFA_OPTS += -D NO_DEVICE_SELF_POWER +LUFA_OPTS += -D NO_DEVICE_REMOTE_WAKEUP +LUFA_OPTS += -D NO_STREAM_CALLBACKS + + +# Create the LUFA source path variables by including the LUFA root makefile +include $(LUFA_PATH)/LUFA/makefile + + +# List C source files here. (C dependencies are automatically generated.) +SRC = $(TARGET).c \ + Descriptors.c \ + $(LUFA_SRC_USB) \ + + +# List C++ source files here. (C dependencies are automatically generated.) +CPPSRC = + + +# List Assembler source files here. +# Make them always end in a capital .S. Files ending in a lowercase .s +# will not be considered source files but generated files (assembler +# output from the compiler), and will be deleted upon "make clean"! +# Even though the DOS/Win* filesystem matches both .s and .S the same, +# it will preserve the spelling of the filenames, and gcc itself does +# care about how the name is spelled on its command-line. +ASRC = + + +# Optimization level, can be [0, 1, 2, 3, s]. +# 0 = turn off optimization. s = optimize for size. +# (Note: 3 is not always the best optimization level. See avr-libc FAQ.) +OPT = s + + +# Debugging format. +# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs. +# AVR Studio 4.10 requires dwarf-2. +# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run. +DEBUG = dwarf-2 + + +# List any extra directories to look for include files here. +# Each directory must be seperated by a space. +# Use forward slashes for directory separators. +# For a directory that has spaces, enclose it in quotes. +EXTRAINCDIRS = $(LUFA_PATH)/ + + +# Compiler flag to set the C Standard level. +# c89 = "ANSI" C +# gnu89 = c89 plus GCC extensions +# c99 = ISO C99 standard (not yet fully implemented) +# gnu99 = c99 plus GCC extensions +CSTANDARD = -std=c99 + + +# Place -D or -U options here for C sources +CDEFS = -DF_CPU=$(F_CPU)UL +CDEFS += -DARDUINO_MODEL_PID=$(ARDUINO_MODEL_PID) +CDEFS += -DF_CLOCK=$(F_CLOCK)UL +CDEFS += -DBOARD=BOARD_$(BOARD) +CDEFS += -DBOOT_START_ADDR=$(BOOT_START)UL +CDEFS += -DTX_RX_LED_PULSE_MS=3 +CDEFS += $(LUFA_OPTS) + + +# Place -D or -U options here for ASM sources +ADEFS = -DF_CPU=$(F_CPU) +ADEFS += -DF_CLOCK=$(F_CLOCK)UL +ADEFS += -DBOARD=BOARD_$(BOARD) +CDEFS += -DBOOT_START_ADDR=$(BOOT_START)UL +ADEFS += $(LUFA_OPTS) + +# Place -D or -U options here for C++ sources +CPPDEFS = -DF_CPU=$(F_CPU)UL +CPPDEFS += -DF_CLOCK=$(F_CLOCK)UL +CPPDEFS += -DBOARD=BOARD_$(BOARD) +CDEFS += -DBOOT_START_ADDR=$(BOOT_START)UL +CPPDEFS += $(LUFA_OPTS) +#CPPDEFS += -D__STDC_LIMIT_MACROS +#CPPDEFS += -D__STDC_CONSTANT_MACROS + + + +#---------------- Compiler Options C ---------------- +# -g*: generate debugging information +# -O*: optimization level +# -f...: tuning, see GCC manual and avr-libc documentation +# -Wall...: warning level +# -Wa,...: tell GCC to pass this to the assembler. +# -adhlns...: create assembler listing +CFLAGS = -g$(DEBUG) +CFLAGS += $(CDEFS) +CFLAGS += -O$(OPT) +CFLAGS += -funsigned-char +CFLAGS += -funsigned-bitfields +CFLAGS += -ffunction-sections +CFLAGS += -fno-inline-small-functions +CFLAGS += -fpack-struct +CFLAGS += -fshort-enums +CFLAGS += -fno-strict-aliasing +CFLAGS += -Wall +CFLAGS += -Wstrict-prototypes +#CFLAGS += -mshort-calls +#CFLAGS += -fno-unit-at-a-time +#CFLAGS += -Wundef +#CFLAGS += -Wunreachable-code +#CFLAGS += -Wsign-compare +CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst) +CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) +CFLAGS += $(CSTANDARD) + + +#---------------- Compiler Options C++ ---------------- +# -g*: generate debugging information +# -O*: optimization level +# -f...: tuning, see GCC manual and avr-libc documentation +# -Wall...: warning level +# -Wa,...: tell GCC to pass this to the assembler. +# -adhlns...: create assembler listing +CPPFLAGS = -g$(DEBUG) +CPPFLAGS += $(CPPDEFS) +CPPFLAGS += -O$(OPT) +CPPFLAGS += -funsigned-char +CPPFLAGS += -funsigned-bitfields +CPPFLAGS += -fpack-struct +CPPFLAGS += -fshort-enums +CPPFLAGS += -fno-exceptions +CPPFLAGS += -Wall +CPPFLAGS += -Wundef +#CPPFLAGS += -mshort-calls +#CPPFLAGS += -fno-unit-at-a-time +#CPPFLAGS += -Wstrict-prototypes +#CPPFLAGS += -Wunreachable-code +#CPPFLAGS += -Wsign-compare +CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst) +CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) +#CPPFLAGS += $(CSTANDARD) + + +#---------------- Assembler Options ---------------- +# -Wa,...: tell GCC to pass this to the assembler. +# -adhlns: create listing +# -gstabs: have the assembler create line number information; note that +# for use in COFF files, additional information about filenames +# and function names needs to be present in the assembler source +# files -- see avr-libc docs [FIXME: not yet described there] +# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# dump that will be displayed for a given single line of source input. +ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 + + +#---------------- Library Options ---------------- +# Minimalistic printf version +PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min + +# Floating point printf version (requires MATH_LIB = -lm below) +PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt + +# If this is left blank, then it will use the Standard printf version. +PRINTF_LIB = +#PRINTF_LIB = $(PRINTF_LIB_MIN) +#PRINTF_LIB = $(PRINTF_LIB_FLOAT) + + +# Minimalistic scanf version +SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min + +# Floating point + %[ scanf version (requires MATH_LIB = -lm below) +SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt + +# If this is left blank, then it will use the Standard scanf version. +SCANF_LIB = +#SCANF_LIB = $(SCANF_LIB_MIN) +#SCANF_LIB = $(SCANF_LIB_FLOAT) + + +MATH_LIB = -lm + + +# List any extra directories to look for libraries here. +# Each directory must be seperated by a space. +# Use forward slashes for directory separators. +# For a directory that has spaces, enclose it in quotes. +EXTRALIBDIRS = + + + +#---------------- External Memory Options ---------------- + +# 64 KB of external RAM, starting after internal RAM (ATmega128!), +# used for variables (.data/.bss) and heap (malloc()). +#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff + +# 64 KB of external RAM, starting after internal RAM (ATmega128!), +# only used for heap (malloc()). +#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff + +EXTMEMOPTS = + + + +#---------------- Linker Options ---------------- +# -Wl,...: tell GCC to pass this to linker. +# -Map: create map file +# --cref: add cross reference to map file +LDFLAGS = -Wl,-Map=$(TARGET).map,--cref +LDFLAGS += -Wl,--section-start=.text=$(BOOT_START) +LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--gc-sections +LDFLAGS += $(EXTMEMOPTS) +LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) +LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB) +#LDFLAGS += -T linker_script.x + + + +#---------------- Programming Options (avrdude) ---------------- + +# Fuse settings for Arduino Uno DFU bootloader project +AVRDUDE_FUSES = -U efuse:w:0xF4:m -U hfuse:w:0xD9:m -U lfuse:w:0xFF:m + +# Lock settings for Arduino Uno DFU bootloader project +AVRDUDE_LOCK = -U lock:w:0x0F:m + +# Programming hardware +# Type: avrdude -c ? +# to get a full listing. +# +AVRDUDE_PROGRAMMER = avrispmkii + +# com1 = serial port. Use lpt1 to connect to parallel port. +AVRDUDE_PORT = usb + +AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex +#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep + +# Uncomment the following if you want avrdude's erase cycle counter. +# Note that this counter needs to be initialized first using -Yn, +# see avrdude manual. +#AVRDUDE_ERASE_COUNTER = -y + +# Uncomment the following if you do /not/ wish a verification to be +# performed after programming the device. +#AVRDUDE_NO_VERIFY = -V + +# Increase verbosity level. Please use this when submitting bug +# reports about avrdude. See +# to submit bug reports. +#AVRDUDE_VERBOSE = -v -v + +AVRDUDE_FLAGS = -p $(MCU_AVRDUDE) -F -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) +AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY) +AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE) +AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER) + + + +#---------------- Debugging Options ---------------- + +# For simulavr only - target MCU frequency. +DEBUG_MFREQ = $(F_CPU) + +# Set the DEBUG_UI to either gdb or insight. +# DEBUG_UI = gdb +DEBUG_UI = insight + +# Set the debugging back-end to either avarice, simulavr. +DEBUG_BACKEND = avarice +#DEBUG_BACKEND = simulavr + +# GDB Init Filename. +GDBINIT_FILE = __avr_gdbinit + +# When using avarice settings for the JTAG +JTAG_DEV = /dev/com1 + +# Debugging port used to communicate between GDB / avarice / simulavr. +DEBUG_PORT = 4242 + +# Debugging host used to communicate between GDB / avarice / simulavr, normally +# just set to localhost unless doing some sort of crazy debugging when +# avarice is running on a different computer. +DEBUG_HOST = localhost + + + +#============================================================================ + + +# Define programs and commands. +SHELL = sh +CC = avr-gcc +OBJCOPY = avr-objcopy +OBJDUMP = avr-objdump +SIZE = avr-size +AR = avr-ar rcs +NM = avr-nm +AVRDUDE = avrdude +REMOVE = rm -f +REMOVEDIR = rm -rf +COPY = cp +WINSHELL = cmd + + +# Define Messages +# English +MSG_ERRORS_NONE = Errors: none +MSG_BEGIN = -------- begin -------- +MSG_END = -------- end -------- +MSG_SIZE_BEFORE = Size before: +MSG_SIZE_AFTER = Size after: +MSG_COFF = Converting to AVR COFF: +MSG_EXTENDED_COFF = Converting to AVR Extended COFF: +MSG_FLASH = Creating load file for Flash: +MSG_EEPROM = Creating load file for EEPROM: +MSG_EXTENDED_LISTING = Creating Extended Listing: +MSG_SYMBOL_TABLE = Creating Symbol Table: +MSG_LINKING = Linking: +MSG_COMPILING = Compiling C: +MSG_COMPILING_CPP = Compiling C++: +MSG_ASSEMBLING = Assembling: +MSG_CLEANING = Cleaning project: +MSG_CREATING_LIBRARY = Creating library: + + + + +# Define all object files. +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) + +# Define all listing files. +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) + + +# Compiler flags to generate dependency files. +GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d + + +# Combine all necessary flags and optional flags. +# Add target processor to flags. +ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS) +ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS) +ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) + + + + + +# Default target. +all: begin gccversion sizebefore build sizeafter end + +# Change the build target to build a HEX file or a library. +build: elf hex eep lss sym +#build: lib + + +elf: $(TARGET).elf +hex: $(TARGET).hex +eep: $(TARGET).eep +lss: $(TARGET).lss +sym: $(TARGET).sym +LIBNAME=lib$(TARGET).a +lib: $(LIBNAME) + + + +# Eye candy. +# AVR Studio 3.x does not check make's exit code but relies on +# the following magic strings to be generated by the compile job. +begin: + @echo + @echo $(MSG_BEGIN) + +end: + @echo $(MSG_END) + @echo + + +# Display size of file. +HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex +ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf +MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) ) +FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr ) + + +sizebefore: + @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \ + 2>/dev/null; echo; fi + +sizeafter: + @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ + 2>/dev/null; echo; fi + + + +# Display compiler version information. +gccversion : + @$(CC) --version + + +# Program the device. +program: $(TARGET).hex $(TARGET).eep + $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) $(AVRDUDE_FUSES) $(AVRDUDE_LOCK) + + +# Generate avr-gdb config/init file which does the following: +# define the reset signal, load the target file, connect to target, and set +# a breakpoint at main(). +gdb-config: + @$(REMOVE) $(GDBINIT_FILE) + @echo define reset >> $(GDBINIT_FILE) + @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) + @echo end >> $(GDBINIT_FILE) + @echo file $(TARGET).elf >> $(GDBINIT_FILE) + @echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE) +ifeq ($(DEBUG_BACKEND),simulavr) + @echo load >> $(GDBINIT_FILE) +endif + @echo break main >> $(GDBINIT_FILE) + +debug: gdb-config $(TARGET).elf +ifeq ($(DEBUG_BACKEND), avarice) + @echo Starting AVaRICE - Press enter when "waiting to connect" message displays. + @$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \ + $(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT) + @$(WINSHELL) /c pause + +else + @$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \ + $(DEBUG_MFREQ) --port $(DEBUG_PORT) +endif + @$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE) + + + + +# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB. +COFFCONVERT = $(OBJCOPY) --debugging +COFFCONVERT += --change-section-address .data-0x800000 +COFFCONVERT += --change-section-address .bss-0x800000 +COFFCONVERT += --change-section-address .noinit-0x800000 +COFFCONVERT += --change-section-address .eeprom-0x810000 + + + +coff: $(TARGET).elf + @echo + @echo $(MSG_COFF) $(TARGET).cof + $(COFFCONVERT) -O coff-avr $< $(TARGET).cof + + +extcoff: $(TARGET).elf + @echo + @echo $(MSG_EXTENDED_COFF) $(TARGET).cof + $(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof + + + +# Create final output files (.hex, .eep) from ELF output file. +%.hex: %.elf + @echo + @echo $(MSG_FLASH) $@ + $(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock $< $@ + +%.eep: %.elf + @echo + @echo $(MSG_EEPROM) $@ + -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \ + --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0 + +# Create extended listing file from ELF output file. +%.lss: %.elf + @echo + @echo $(MSG_EXTENDED_LISTING) $@ + $(OBJDUMP) -h -S -z $< > $@ + +# Create a symbol table from ELF output file. +%.sym: %.elf + @echo + @echo $(MSG_SYMBOL_TABLE) $@ + $(NM) -n $< > $@ + + + +# Create library from object files. +.SECONDARY : $(TARGET).a +.PRECIOUS : $(OBJ) +%.a: $(OBJ) + @echo + @echo $(MSG_CREATING_LIBRARY) $@ + $(AR) $@ $(OBJ) + + +# Link: create ELF output file from object files. +.SECONDARY : $(TARGET).elf +.PRECIOUS : $(OBJ) +%.elf: $(OBJ) + @echo + @echo $(MSG_LINKING) $@ + $(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS) + + +# Compile: create object files from C source files. +$(OBJDIR)/%.o : %.c + @echo + @echo $(MSG_COMPILING) $< + $(CC) -c $(ALL_CFLAGS) $< -o $@ + + +# Compile: create object files from C++ source files. +$(OBJDIR)/%.o : %.cpp + @echo + @echo $(MSG_COMPILING_CPP) $< + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + + +# Compile: create assembler files from C source files. +%.s : %.c + $(CC) -S $(ALL_CFLAGS) $< -o $@ + + +# Compile: create assembler files from C++ source files. +%.s : %.cpp + $(CC) -S $(ALL_CPPFLAGS) $< -o $@ + + +# Assemble: create object files from assembler source files. +$(OBJDIR)/%.o : %.S + @echo + @echo $(MSG_ASSEMBLING) $< + $(CC) -c $(ALL_ASFLAGS) $< -o $@ + + +# Create preprocessed source for use in sending a bug report. +%.i : %.c + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + + +# Target: clean project. +clean: begin clean_list end + +clean_list : + @echo + @echo $(MSG_CLEANING) + $(REMOVE) $(TARGET).hex + $(REMOVE) $(TARGET).eep + $(REMOVE) $(TARGET).cof + $(REMOVE) $(TARGET).elf + $(REMOVE) $(TARGET).map + $(REMOVE) $(TARGET).sym + $(REMOVE) $(TARGET).lss + $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o) + $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst) + $(REMOVE) $(SRC:.c=.s) + $(REMOVE) $(SRC:.c=.d) + $(REMOVE) $(SRC:.c=.i) + $(REMOVEDIR) .dep + +doxygen: + @echo Generating Project Documentation... + @doxygen Doxygen.conf + @echo Documentation Generation Complete. + +clean_doxygen: + rm -rf Documentation + +# Create object files directory +$(shell mkdir $(OBJDIR) 2>/dev/null) + + +# Include the dependency files. +-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*) + + +# Listing of phony targets. +.PHONY : all begin finish end sizebefore sizeafter gccversion \ +build elf hex eep lss sym coff extcoff doxygen clean \ +clean_list clean_doxygen program debug gdb-config diff --git a/test/ardmake/hardware/firmwares/arduino-usbdfu/readme.txt b/test/ardmake/hardware/firmwares/arduino-usbdfu/readme.txt new file mode 100644 index 0000000..e376679 --- /dev/null +++ b/test/ardmake/hardware/firmwares/arduino-usbdfu/readme.txt @@ -0,0 +1,7 @@ +To setup the project and program an ATMEG8U2 with the Arduino USB DFU bootloader: +1. unpack the source into LUFA's Bootloader directory +2. set ARDUINO_MODEL_PID in the makefile as appropriate +3. do "make clean; make; make program" + +Check that the board enumerates as either "Arduino Uno DFU" or "Arduino Mega 2560 DFU". Test by uploading the Arduino-usbserial application firmware (see instructions in Arduino-usbserial directory) + diff --git a/test/ardmake/hardware/firmwares/arduino-usbserial/Arduino-usbserial-mega.hex b/test/ardmake/hardware/firmwares/arduino-usbserial/Arduino-usbserial-mega.hex new file mode 100644 index 0000000..fbbeb07 --- /dev/null +++ b/test/ardmake/hardware/firmwares/arduino-usbserial/Arduino-usbserial-mega.hex @@ -0,0 +1,256 @@ +:10000000A2C00000BBC00000B9C00000B7C0000023 +:10001000B5C00000B3C00000B1C00000AFC0000018 +:10002000ADC00000ABC00000A9C000005AC4000071 +:100030001EC40000A3C00000A1C000009FC00000BB +:100040009DC000009BC0000099C0000097C0000048 +:1000500095C0000093C0000091C0000014C10000D2 +:100060008DC000008BC0000089C0000087C0000068 +:1000700085C0000083C0000081C000007FC0000078 +:100080007DC000007BC0000079C0000077C0000088 +:1000900075C0000073C000001201100102000008CA +:1000A0004123100001000102DC0109023E000201AF +:1000B00000C0320904000001020201000524000111 +:1000C0001004240206052406000107058203080027 +:1000D000FF09040100020A000000070504024000B5 +:1000E00001070583024000010403090432034100B3 +:1000F00072006400750069006E006F002000280027 +:100100007700770077002E006100720064007500B0 +:1001100069006E006F002E0063006300290000007C +:100120002403410072006400750069006E006F00D6 +:1001300020004D006500670061002000320035009E +:1001400036003000000011241FBECFEFD2E0DEBF2A +:10015000CDBF11E0A0E0B1E0E0EDFFE002C005900E +:100160000D92A631B107D9F712E0A6E1B1E001C0C6 +:100170001D92AF32B107E1F7F1D028C741CF9C0102 +:10018000DC01AE57BF4FED91FC9111974191119653 +:10019000FC93EE9380589F4FE817F90711F42D93C5 +:1001A0003C939FB7F894F901EC57FF4F8081815041 +:1001B00080839FBF842F0895DF92EF92FF920F9369 +:1001C0001F93FC018489813019F0823021F405C02D +:1001D00040E3D42E04C0DD2402C030E2D32E838954 +:1001E000823011F488E0D82A8589873031F0883050 +:1001F00031F0863031F482E003C084E001C086E053 +:10020000D82A1092C9001092C8001092CA00E78440 +:10021000F0880189128980E0E81681EEF80680E016 +:10022000080780E0180719F420E130E00FC0C8018A +:10023000B701969587957795679560587B47814E6E +:100240009F4FA8019701A0D6215030403093CD0098 +:100250002093CC00D092CA0080E0E81681EEF80628 +:1002600080E0080780E0180711F082E001C080E01C +:100270008093C80088E98093C9001F910F91FF9077 +:10028000EF90DF9008951F920F920FB60F921124F6 +:100290002F938F939F93EF93FF939091CE008EB304 +:1002A0008430F1F4E0919901F0919A019083E0910A +:1002B0009901F0919A01CF01019690939A01809350 +:1002C00099018959914021F489E191E092838183D8 +:1002D0009FB7F89480919D018F5F80939D019FBF90 +:1002E000FF91EF919F918F912F910F900FBE0F90E3 +:1002F0001F901895FC01858580FF02C05F980895C6 +:100300005F9A089580E091E0D5C580E091E088C5CE +:1003100084B7877F84BF28E10FB6F89420936000EC +:10032000109260000FBE87E690E09093CD0080931E +:10033000CC0086E08093CA001092C8002093C900C8 +:10034000539A5A9A8AB180638AB98BB180638BB908 +:1003500083D284E085BD5F9A579A08950F931F93C7 +:10036000CF93DF93D5DF2FB7F8948EE991E0909388 +:100370001F0280931E0290932102809320022FBFC0 +:100380002FB7F89489E191E090939A0180939901B5 +:1003900090939C0180939B012FBF7894CEE9D1E08C +:1003A00003E08FB7F894909122028FBF903809F143 +:1003B00080E091E0ABD497FD1CC0E0911E02F0916B +:1003C0001F028083E0911E02F0911F02CF0101966F +:1003D00090931F0280931E028E51924011F4D2839B +:1003E000C1839FB7F894809122028F5F809322028D +:1003F0009FBF8FB7F89410919D018FBFA89902C03D +:10040000113678F1A89A80919D01882361F05D985A +:100410000093160108C089E191E0B1DE682F80E009 +:1004200091E0DAD411501123B1F78091160188239D +:1004300051F0809116018150809316018091160130 +:10044000882309F45D9A80911701882351F08091E7 +:10045000170181508093170180911701882309F4B7 +:100460005C9A8FB7F894909122028FBF992369F01C +:100470008EE991E084DE982F8091C80085FFFCCF43 +:100480009093CE005C980093170180E091E095D4A2 +:100490002AD487CFDA01923049F0933061F091305D +:1004A000F9F4E8E9F0E022E130E01EC0EAEAF0E029 +:1004B0002EE330E019C0813049F0813018F08230ED +:1004C00079F408C0E8EEF0E0849107C0ECEEF0E0CB +:1004D000849103C0E0E2F1E08491282F30E004C071 +:1004E000E0E0F0E020E030E0ED93FC93C9010895F6 +:1004F00028E030E040E003C04F5F220F331F281791 +:100500003907D0F3842F8295807F08958093E90086 +:100510008091EB0081608093EB001092ED0060937E +:10052000EC004093ED008091EE00881F8827881F23 +:1005300008951092F40090E09093E9001092F0007A +:100540001092E8001092ED008091EB008E7F809376 +:10055000EB009F5F953081F70895809127028823F3 +:100560008CF403C08EB38823B1F08091E80082FF41 +:10057000F9CF8091E8008B778093E80008958EB3DF +:10058000882349F08091E80080FFF9CF8091E8004E +:100590008E778093E800089594E68091EC0080FFC8 +:1005A00005C08091E80080FF05C023C08091E8006D +:1005B00082FD1FC08EB3882311F482E008958EB3AC +:1005C000853011F483E008958091EB0085FF02C02F +:1005D00081E008958091E10082FFDFCF8091E1000A +:1005E0008B7F8093E100992311F484E0089591506A +:1005F000D4CF80E008959C0140912D0250912E02AD +:100600004617570718F4F90120E038C06115710545 +:1006100011F0AB01F8CF8091E8008E778093E8006D +:1006200040E050E0F0CF8091E80083FF02C081E01D +:1006300008958091E80082FD2DC08EB3882381F15A +:100640008EB3853079F18091E80080FF17C09091DA +:10065000F20006C081918093F100415050409F5FAD +:100660004115510511F09830A8F320E0983009F4B5 +:1006700021E08091E8008E778093E80041155105D4 +:1006800091F6222381F606C08EB3882349F08EB3FB +:10069000853041F08091E80082FFF6CF80E0089538 +:1006A00082E0089583E008959C0140912D025091CD +:1006B0002E024617570710F490E03BC061157105F4 +:1006C00011F0AB01F9CF8091E8008E778093E800BC +:1006D00040E050E0F1CF8091E80083FF02C081E06C +:1006E00008958091E80082FD30C08EB3882399F18F +:1006F0008EB3853091F18091E80080FF1AC080911F +:10070000F20009C0F9012F5F3F4FE491E093F1003F +:10071000415050408F5F4115510511F0883090F3E2 +:1007200090E0883009F491E08091E8008E77809322 +:10073000E8004115510579F6992369F606C08EB394 +:10074000882349F08EB3853041F08091E80082FF24 +:10075000F6CF80E0089582E0089583E008959C013B +:100760006115710529F48091E8008B778093E8008A +:10077000F90120C08091E80083FF02C081E0089564 +:100780008EB3882339F18EB3853031F18091E80042 +:1007900082FFF0CF06C08091F100819361507040DC +:1007A00021F08091F2008823B1F78091E8008B77E7 +:1007B0008093E80061157105E9F606C08EB38823C1 +:1007C00049F08EB3853041F08091E80080FFF6CF8C +:1007D00080E0089582E0089583E0089542D044D0F7 +:1007E0001EBA10922502109224021092230284E075 +:1007F00089BD89B5826089BD09B400FEFDCF8091B5 +:10080000D800982F9F779093D80080688093D80065 +:10081000809163008E7F809363008091D8008F7DEC +:100820008093D8008091E0008E7F8093E0008091DB +:10083000E1008E7F8093E1008091E20081608093EF +:10084000E2008091E100877F8093E1008091E200E7 +:1008500088608093E2000895C1DF81E080932602E2 +:1008600008951092E20008951092E10008951F92F9 +:100870000F920FB60F9211241F932F933F934F9314 +:100880005F936F937F938F939F93AF93BF93EF93F8 +:10089000FF93E9EEF0E0108117701082E0EFF0E0D6 +:1008A0008081877F80837894C3D0F894A9EEB0E0EC +:1008B0001C92E0EFF0E08081886080831C93FF91C0 +:1008C000EF91BF91AF919F918F917F916F915F91C8 +:1008D0004F913F912F911F910F900FBE0F901F903E +:1008E00018951F920F920FB60F9211242F933F93DA +:1008F0004F935F936F937F938F939F93AF93BF9328 +:10090000EF93FF938091E10080FF1BC08091E20094 +:1009100080FF17C08091E1008E7F8093E10080917D +:10092000E2008E7F8093E2008091E20080618093FC +:10093000E2008091D80080628093D80019BC1EBA72 +:10094000D1D18091E10084FF29C08091E20084FF31 +:1009500025C084E089BD89B5826089BD09B400FEE7 +:10096000FDCF8091D8008F7D8093D8008091E100E9 +:100970008F7E8093E1008091E2008F7E8093E20081 +:100980008091E20081608093E200809125028823BB +:1009900011F481E001C084E08EBBA4D18091E1001C +:1009A00083FF27C08091E20083FF23C08091E10094 +:1009B000877F8093E10082E08EBB109225028091B8 +:1009C000E1008E7F8093E1008091E2008E7F809332 +:1009D000E2008091E20080618093E200AADD80E085 +:1009E00060E042E093DD8091F00088608093F00049 +:1009F00079D18091E10082FF0AC08091E20082FFFC +:100A000006C08091E1008B7F8093E1006BD1FF9164 +:100A1000EF91BF91AF919F918F917F916F915F9176 +:100A20004F913F912F910F900FBE0F901F901895EF +:100A30001F93DF93CF93CDB7DEB7AC970FB6F89483 +:100A4000DEBF0FBECDBFE7E2F2E08091F1008193FF +:100A500022E0EF32F207C9F7809127023091280295 +:100A6000353009F487C0363040F43130C9F13130C7 +:100A700070F0333009F01DC133C0383009F4EFC0D5 +:100A8000393009F4FEC0363009F013C192C0803805 +:100A900021F0823809F00DC108C0909123028091A5 +:100AA0002402882399F0926011C080912B028770F4 +:100AB0008093E9008091EB0090E025E09695879582 +:100AC0002A95E1F7982F91701092E9008091E80043 +:100AD000877F8093E8009093F1001092F100CAC0E4 +:100AE000882319F0823009F0E4C090E08F71907093 +:100AF000009721F0029709F0DDC00CC08091290217 +:100B0000813009F0D7C010922402333069F5809308 +:100B100024022AC080912902882331F520912B02DA +:100B2000277009F4C7C02093E9008091EB0080FF93 +:100B3000C1C0333021F48091EB00806213C08091FA +:100B4000EB0080618093EB0081E090E002C0880FB1 +:100B5000991F2A95E2F78093EA001092EA008091AB +:100B6000EB0088608093EB001092E9008091E80030 +:100B7000877F83C0882309F09CC01091290280914F +:100B8000E800877F8093E800E8DC04C08EB3882308 +:100B900009F490C08091E80080FFF8CF812F8F7713 +:100BA00011F492E001C093E09EBB80688093E30063 +:100BB00081C08058823008F07CC0809129029091D9 +:100BC0002A0223E08C3D920799F55FB7F894DE0185 +:100BD00015964EE020E030E061E2E42FF0E0609313 +:100BE0005700849120FF03C082958F704F5F982F2C +:100BF0009F70892F805D8A3308F0895F8C931196EE +:100C00001C9211972F5F3F4F12962431310529F71F +:100C10005FBF8AE28B8383E08C838091E800877FCB +:100C20008093E800CE0103966AE270E0E4DC11C034 +:100C300060912B02AE014F5F5F4F2CDCBC0100972F +:100C4000C9F18091E800877F8093E80089819A81CB +:100C50002BDD8091E8008B778093E8002BC08038F3 +:100C600041F58091E800877F8093E800809125021C +:100C70008093F1008091E8008E778093E8006DDC2E +:100C800019C08823B1F490912902923098F4809190 +:100C9000E800877F8093E800909325025EDC8091D6 +:100CA0002502882311F483E001C084E08EBB2DDB94 +:100CB00001C028DB8091E80083FF0AC08091EB002F +:100CC00080628093EB008091E800877F8093E8004A +:100CD000AC960FB6F894DEBF0FBECDBFCF91DF91BB +:100CE0001F91089508951F938EB3882361F010918A +:100CF000E9001092E9008091E80083FF01C098DECE +:100D000017701093E9001F9108950895FC018EB3A8 +:100D1000843021F587859089A189B2890097A10542 +:100D2000B105E1F085818093E9008091E80082FFC0 +:100D300015C08091F200882319F42FEF3FEF04C013 +:100D40008091F100282F30E08091F200882341F457 +:100D50008091E8008B778093E80002C02FEF3FEF8F +:100D6000C9010895FC018EB3843011F587859089FF +:100D7000A189B2890097A105B105D1F08181809345 +:100D8000E9008091F2008823A9F09091E800809119 +:100D9000E8008E778093E80095FD0CC0FDDB982F6E +:100DA000882349F48091E8008E778093E80003C09F +:100DB00092E001C090E0892F0895FC018EB3843049 +:100DC00051F487859089A189B2890097A105B10561 +:100DD00011F0CF01C7CF08951F93FC01162F8EB3DA +:100DE0008430D9F487859089A189B2890097A105BB +:100DF000B10599F081818093E9008091E80085FD3B +:100E000008C08091E8008E778093E800C5DB8823D6 +:100E100029F41093F10080E001C082E01F91089551 +:100E20000F931F93CF93DF93EC010D96FC0189E0A4 +:100E3000DF011D928A95E9F72A813B8109818C8126 +:100E4000882311F410E001C014E0C90151DB182B14 +:100E50001260802F61E8412F59DB882329F12E8110 +:100E60003F810D818885882311F410E001C014E0D2 +:100E7000C9013EDB182B1260802F60E8412F46DB52 +:100E8000882391F02A853B8509858C85882311F478 +:100E900010E001C014E0C9012BDB182B1260802F79 +:100EA00061EC412F33DB01C080E0DF91CF911F91D6 +:100EB0000F910895CF93DF93EC018091E80083FFB9 +:100EC00060C0888190E020912B0230912C0228177D +:100ED000390709F056C080912802813261F08232D0 +:100EE00020F4803209F04DC019C0823269F183329A +:100EF00009F047C038C080912702813A09F041C00B +:100F00008091E800877F8093E800CE010F9667E02C +:100F100070E071DB8091E8008B7713C0809127022D +:100F2000813279F58091E800877F8093E800CE01D7 +:100F30000F9667E070E013DCCE013ED98091E800A7 +:100F40008E778093E8001DC0809127028132C9F41A +:100F50008091E800877F8093E800809129028D8747 +:100F6000CE01C8D90DC080912702813251F4809101 +:100F7000E800877F8093E800CE0160912902C5DEFA +:100F8000ECDADF91CF910895A1E21A2EAA1BBB1BC8 +:100F9000FD010DC0AA1FBB1FEE1FFF1FA217B30745 +:100FA000E407F50720F0A21BB30BE40BF50B661F5B +:100FB000771F881F991F1A9469F76095709580951F +:100FC00090959B01AC01BD01CF010895F894FFCF2E +:100FD0000003400000044000000208000000000080 +:060FE0000000000000000B +:00000001FF diff --git a/test/ardmake/hardware/firmwares/arduino-usbserial/Arduino-usbserial-uno.hex b/test/ardmake/hardware/firmwares/arduino-usbserial/Arduino-usbserial-uno.hex new file mode 100644 index 0000000..ca51dfa --- /dev/null +++ b/test/ardmake/hardware/firmwares/arduino-usbserial/Arduino-usbserial-uno.hex @@ -0,0 +1,256 @@ +:100000009CC00000B5C00000B3C00000B1C000003B +:10001000AFC00000ADC00000ABC00000A9C0000030 +:10002000A7C00000A5C00000A3C0000054C4000089 +:1000300018C400009DC000009BC0000099C00000D3 +:1000400097C0000095C0000093C0000091C0000060 +:100050008FC000008DC000008BC000000EC10000EA +:1000600087C0000085C0000083C0000081C0000080 +:100070007FC000007DC000007BC0000079C0000090 +:1000800077C0000075C0000073C0000071C00000A0 +:100090006FC000006DC000001201100102000008D6 +:1000A0004123010001000102DC0109023E000201BE +:1000B00000C0320904000001020201000524000111 +:1000C0001004240206052406000107058203080027 +:1000D000FF09040100020A000000070504024000B5 +:1000E00001070583024000010403090432034100B3 +:1000F00072006400750069006E006F002000280027 +:100100007700770077002E006100720064007500B0 +:1001100069006E006F002E0063006300290000007C +:100120001803410072006400750069006E006F00E2 +:10013000200055006E006F00000011241FBECFEF9D +:10014000D2E0DEBFCDBF11E0A0E0B1E0E4ECFFE023 +:1001500002C005900D92A631B107D9F712E0A6E1D1 +:10016000B1E001C01D92AF32B107E1F7F1D028C76D +:1001700047CF9C01DC01AE57BF4FED91FC91119729 +:1001800041911196FC93EE9380589F4FE817F90721 +:1001900011F42D933C939FB7F894F901EC57FF4F5E +:1001A0008081815080839FBF842F0895DF92EF92DA +:1001B000FF920F931F93FC018489813019F08230E4 +:1001C00021F405C040E3D42E04C0DD2402C030E297 +:1001D000D32E8389823011F488E0D82A858987302C +:1001E00031F0883031F0863031F482E003C084E0B1 +:1001F00001C086E0D82A1092C9001092C80010925F +:10020000CA00E784F0880189128980E0E81681EE4F +:10021000F80680E0080780E0180719F420E130E0D4 +:100220000FC0C801B7019695879577956795605877 +:100230007B47814E9F4FA8019701A0D621503040A7 +:100240003093CD002093CC00D092CA0080E0E81615 +:1002500081EEF80680E0080780E0180711F082E0E0 +:1002600001C080E08093C80088E98093C9001F9195 +:100270000F91FF90EF90DF9008951F920F920FB6AD +:100280000F9211242F938F939F93EF93FF9390914D +:10029000CE008EB38430F1F4E0919901F0919A018F +:1002A0009083E0919901F0919A01CF01019690938A +:1002B0009A01809399018959914021F489E191E053 +:1002C000928381839FB7F89480919D018F5F809383 +:1002D0009D019FBFFF91EF919F918F912F910F9063 +:1002E0000FBE0F901F901895FC01858580FF02C0FE +:1002F0005F9808955F9A089580E091E0D5C580E009 +:1003000091E088C584B7877F84BF28E10FB6F89451 +:1003100020936000109260000FBE87E690E09093FB +:10032000CD008093CC0086E08093CA001092C80074 +:100330002093C900539A5A9A8AB180638AB98BB1C3 +:1003400080638BB983D284E085BD5F9A579A089504 +:100350000F931F93CF93DF93D5DF2FB7F8948EE9D8 +:1003600091E090931F0280931E029093210280934C +:1003700020022FBF2FB7F89489E191E090939A0162 +:100380008093990190939C0180939B012FBF789457 +:10039000CEE9D1E003E08FB7F894909122028FBFAD +:1003A000903809F180E091E0ABD497FD1CC0E0915A +:1003B0001E02F0911F028083E0911E02F0911F0245 +:1003C000CF01019690931F0280931E028E5192409E +:1003D00011F4D283C1839FB7F894809122028F5F7A +:1003E000809322029FBF8FB7F89410919D018FBF19 +:1003F000A89902C0113678F1A89A80919D018823AE +:1004000061F05D980093160108C089E191E0B1DECA +:10041000682F80E091E0DAD411501123B1F7809178 +:100420001601882351F080911601815080931601A6 +:1004300080911601882309F45D9A80911701882321 +:1004400051F080911701815080931701809117011D +:10045000882309F45C9A8FB7F894909122028FBF99 +:10046000992369F08EE991E084DE982F8091C8008D +:1004700085FFFCCF9093CE005C980093170180E03D +:1004800091E095D42AD487CFDA01923049F09330A5 +:1004900061F09130F9F4E8E9F0E022E130E01EC0CB +:1004A000EAEAF0E02EE330E019C0813049F0813013 +:1004B00018F0823079F408C0E8EEF0E0849107C0CB +:1004C000ECEEF0E0849103C0E0E2F1E08491282FAB +:1004D00030E004C0E0E0F0E020E030E0ED93FC9399 +:1004E000C901089528E030E040E003C04F5F220FCB +:1004F000331F28173907D0F3842F8295807F089502 +:100500008093E9008091EB0081608093EB00109272 +:10051000ED006093EC004093ED008091EE00881FA9 +:100520008827881F08951092F40090E09093E900C6 +:100530001092F0001092E8001092ED008091EB0014 +:100540008E7F8093EB009F5F953081F708958091B7 +:10055000270288238CF403C08EB38823B1F08091E6 +:10056000E80082FFF9CF8091E8008B778093E80064 +:1005700008958EB3882349F08091E80080FFF9CF79 +:100580008091E8008E778093E800089594E680914A +:10059000EC0080FF05C08091E80080FF05C023C00B +:1005A0008091E80082FD1FC08EB3882311F482E0A1 +:1005B00008958EB3853011F483E008958091EB00A7 +:1005C00085FF02C081E008958091E10082FFDFCFC6 +:1005D0008091E1008B7F8093E100992311F484E006 +:1005E00008959150D4CF80E008959C0140912D0250 +:1005F00050912E024617570718F4F90120E038C031 +:100600006115710511F0AB01F8CF8091E8008E778C +:100610008093E80040E050E0F0CF8091E80083FF55 +:1006200002C081E008958091E80082FD2DC08EB364 +:10063000882381F18EB3853079F18091E80080FFC5 +:1006400017C09091F20006C081918093F100415053 +:1006500050409F5F4115510511F09830A8F320E0FC +:10066000983009F421E08091E8008E778093E800CB +:100670004115510591F6222381F606C08EB38823D9 +:1006800049F08EB3853041F08091E80082FFF6CFCB +:1006900080E0089582E0089583E008959C014091F0 +:1006A0002D0250912E024617570710F490E03BC0E0 +:1006B0006115710511F0AB01F9CF8091E8008E77DB +:1006C0008093E80040E050E0F1CF8091E80083FFA4 +:1006D00002C081E008958091E80082FD30C08EB3B1 +:1006E000882399F18EB3853091F18091E80080FFE5 +:1006F0001AC08091F20009C0F9012F5F3F4FE491C9 +:10070000E093F100415050408F5F4115510511F0C9 +:10071000883090F390E0883009F491E08091E8000F +:100720008E778093E8004115510579F6992369F693 +:1007300006C08EB3882349F08EB3853041F0809196 +:10074000E80082FFF6CF80E0089582E0089583E01C +:1007500008959C016115710529F48091E8008B775B +:100760008093E800F90120C08091E80083FF02C077 +:1007700081E008958EB3882339F18EB3853031F14D +:100780008091E80082FFF0CF06C08091F100819354 +:100790006150704021F08091F2008823B1F7809180 +:1007A000E8008B778093E80061157105E9F606C0D3 +:1007B0008EB3882349F08EB3853041F08091E800F4 +:1007C00080FFF6CF80E0089582E0089583E00895E9 +:1007D00042D044D01EBA10922502109224021092E8 +:1007E000230284E089BD89B5826089BD09B400FE19 +:1007F000FDCF8091D800982F9F779093D800806884 +:100800008093D800809163008E7F809363008091F5 +:10081000D8008F7D8093D8008091E0008E7F8093F8 +:10082000E0008091E1008E7F8093E1008091E20002 +:1008300081608093E2008091E100877F8093E100F6 +:100840008091E20088608093E2000895C1DF81E03A +:100850008093260208951092E20008951092E1001C +:1008600008951F920F920FB60F9211241F932F938A +:100870003F934F935F936F937F938F939F93AF9328 +:10088000BF93EF93FF93E9EEF0E0108117701082B1 +:10089000E0EFF0E08081877F80837894C3D0F89484 +:1008A000A9EEB0E01C92E0EFF0E0808188608083E8 +:1008B0001C93FF91EF91BF91AF919F918F917F9189 +:1008C0006F915F914F913F912F911F910F900FBEAC +:1008D0000F901F9018951F920F920FB60F92112430 +:1008E0002F933F934F935F936F937F938F939F9338 +:1008F000AF93BF93EF93FF938091E10080FF1BC004 +:100900008091E20080FF17C08091E1008E7F80938C +:10091000E1008091E2008E7F8093E2008091E2000E +:1009200080618093E2008091D80080628093D8003B +:1009300019BC1EBAD1D18091E10084FF29C08091F9 +:10094000E20084FF25C084E089BD89B5826089BD4D +:1009500009B400FEFDCF8091D8008F7D8093D80030 +:100960008091E1008F7E8093E1008091E2008F7E94 +:100970008093E2008091E20081608093E2008091A8 +:100980002502882311F481E001C084E08EBBA4D14C +:100990008091E10083FF27C08091E20083FF23C0A4 +:1009A0008091E100877F8093E10082E08EBB10920E +:1009B00025028091E1008E7F8093E1008091E2002A +:1009C0008E7F8093E2008091E20080618093E2005C +:1009D000AADD80E060E042E093DD8091F000886075 +:1009E0008093F00079D18091E10082FF0AC080916C +:1009F000E20082FF06C08091E1008B7F8093E100DE +:100A00006BD1FF91EF91BF91AF919F918F917F91AA +:100A10006F915F914F913F912F910F900FBE0F906B +:100A20001F9018951F93DF93CF93CDB7DEB7AC9788 +:100A30000FB6F894DEBF0FBECDBFE7E2F2E08091C3 +:100A4000F100819322E0EF32F207C9F7809127028B +:100A500030912802353009F487C0363040F4313007 +:100A6000C9F1313070F0333009F01DC133C0383076 +:100A700009F4EFC0393009F4FEC0363009F013C173 +:100A800092C0803821F0823809F00DC108C09091E1 +:100A9000230280912402882399F0926011C08091F2 +:100AA0002B0287708093E9008091EB0090E025E0B5 +:100AB000969587952A95E1F7982F91701092E90005 +:100AC0008091E800877F8093E8009093F100109276 +:100AD000F100CAC0882319F0823009F0E4C090E028 +:100AE0008F719070009721F0029709F0DDC00CC063 +:100AF00080912902813009F0D7C01092240233304E +:100B000069F5809324022AC080912902882331F557 +:100B100020912B02277009F4C7C02093E90080912F +:100B2000EB0080FFC1C0333021F48091EB00806284 +:100B300013C08091EB0080618093EB0081E090E036 +:100B400002C0880F991F2A95E2F78093EA0010925D +:100B5000EA008091EB0088608093EB001092E9003E +:100B60008091E800877F83C0882309F09CC01091A2 +:100B700029028091E800877F8093E800E8DC04C0C8 +:100B80008EB3882309F490C08091E80080FFF8CFED +:100B9000812F8F7711F492E001C093E09EBB8068B3 +:100BA0008093E30081C08058823008F07CC080913F +:100BB000290290912A0223E08C3D920799F55FB7B4 +:100BC000F894DE0115964EE020E030E061E2E42F7B +:100BD000F0E060935700849120FF03C082958F70EE +:100BE0004F5F982F9F70892F805D8A3308F0895F4F +:100BF0008C9311961C9211972F5F3F4F12962431C0 +:100C0000310529F75FBF8AE28B8383E08C83809173 +:100C1000E800877F8093E800CE0103966AE270E0E7 +:100C2000E4DC11C060912B02AE014F5F5F4F2CDC02 +:100C3000BC010097C9F18091E800877F8093E800AC +:100C400089819A812BDD8091E8008B778093E80081 +:100C50002BC0803841F58091E800877F8093E800C1 +:100C6000809125028093F1008091E8008E77809337 +:100C7000E8006DDC19C08823B1F49091290292300C +:100C800098F48091E800877F8093E8009093250294 +:100C90005EDC80912502882311F483E001C084E0AA +:100CA0008EBB2DDB01C028DB8091E80083FF0AC0EA +:100CB0008091EB0080628093EB008091E800877F59 +:100CC0008093E800AC960FB6F894DEBF0FBECDBFA0 +:100CD000CF91DF911F91089508951F938EB38823BC +:100CE00061F01091E9001092E9008091E80083FF23 +:100CF00001C098DE17701093E9001F9108950895C0 +:100D0000FC018EB3843021F587859089A189B28951 +:100D10000097A105B105E1F085818093E9008091FC +:100D2000E80082FF15C08091F200882319F42FEFAC +:100D30003FEF04C08091F100282F30E08091F20055 +:100D4000882341F48091E8008B778093E80002C00B +:100D50002FEF3FEFC9010895FC018EB3843011F5E8 +:100D600087859089A189B2890097A105B105D1F045 +:100D700081818093E9008091F2008823A9F090910D +:100D8000E8008091E8008E778093E80095FD0CC024 +:100D9000FDDB982F882349F48091E8008E778093BB +:100DA000E80003C092E001C090E0892F0895FC01A3 +:100DB0008EB3843051F487859089A189B2890097D8 +:100DC000A105B10511F0CF01C7CF08951F93FC0114 +:100DD000162F8EB38430D9F487859089A189B28982 +:100DE0000097A105B10599F081818093E900809178 +:100DF000E80085FD08C08091E8008E778093E800C8 +:100E0000C5DB882329F41093F10080E001C082E063 +:100E10001F9108950F931F93CF93DF93EC010D96CD +:100E2000FC0189E0DF011D928A95E9F72A813B8167 +:100E300009818C81882311F410E001C014E0C901FC +:100E400051DB182B1260802F61E8412F59DB88237A +:100E500029F12E813F810D818885882311F410E0CE +:100E600001C014E0C9013EDB182B1260802F60E83E +:100E7000412F46DB882391F02A853B8509858C85A7 +:100E8000882311F410E001C014E0C9012BDB182BFA +:100E90001260802F61EC412F33DB01C080E0DF91D5 +:100EA000CF911F910F910895CF93DF93EC01809123 +:100EB000E80083FF60C0888190E020912B02309190 +:100EC0002C022817390709F056C080912802813278 +:100ED00061F0823220F4803209F04DC019C08232B4 +:100EE00069F1833209F047C038C080912702813A06 +:100EF00009F041C08091E800877F8093E800CE012F +:100F00000F9667E070E071DB8091E8008B7713C08B +:100F100080912702813279F58091E800877F809364 +:100F2000E800CE010F9667E070E013DCCE013ED9F9 +:100F30008091E8008E778093E8001DC080912702A1 +:100F40008132C9F48091E800877F8093E800809126 +:100F500029028D87CE01C8D90DC080912702813228 +:100F600051F48091E800877F8093E800CE01609182 +:100F70002902C5DEECDADF91CF910895A1E21A2EA5 +:100F8000AA1BBB1BFD010DC0AA1FBB1FEE1FFF1F2D +:100F9000A217B307E407F50720F0A21BB30BE40B7D +:100FA000F50B661F771F881F991F1A9469F76095C4 +:100FB0007095809590959B01AC01BD01CF0108957E +:040FC000F894FFCFD3 +:100FC400000340000004400000020800000000008C +:060FD40000000000000017 +:00000001FF diff --git a/test/ardmake/hardware/firmwares/arduino-usbserial/Arduino-usbserial.c b/test/ardmake/hardware/firmwares/arduino-usbserial/Arduino-usbserial.c new file mode 100644 index 0000000..4de73c8 --- /dev/null +++ b/test/ardmake/hardware/firmwares/arduino-usbserial/Arduino-usbserial.c @@ -0,0 +1,242 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2010. + + dean [at] fourwalledcubicle [dot] com + www.fourwalledcubicle.com +*/ + +/* + Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Main source file for the Arduino-usbserial project. This file contains the main tasks of + * the project and is responsible for the initial application hardware configuration. + */ + +#include "Arduino-usbserial.h" + +/** Circular buffer to hold data from the host before it is sent to the device via the serial port. */ +RingBuff_t USBtoUSART_Buffer; + +/** Circular buffer to hold data from the serial port before it is sent to the host. */ +RingBuff_t USARTtoUSB_Buffer; + +/** Pulse generation counters to keep track of the number of milliseconds remaining for each pulse type */ +volatile struct +{ + uint8_t TxLEDPulse; /**< Milliseconds remaining for data Tx LED pulse */ + uint8_t RxLEDPulse; /**< Milliseconds remaining for data Rx LED pulse */ + uint8_t PingPongLEDPulse; /**< Milliseconds remaining for enumeration Tx/Rx ping-pong LED pulse */ +} PulseMSRemaining; + +/** LUFA CDC Class driver interface configuration and state information. This structure is + * passed to all CDC Class driver functions, so that multiple instances of the same class + * within a device can be differentiated from one another. + */ +USB_ClassInfo_CDC_Device_t VirtualSerial_CDC_Interface = + { + .Config = + { + .ControlInterfaceNumber = 0, + + .DataINEndpointNumber = CDC_TX_EPNUM, + .DataINEndpointSize = CDC_TXRX_EPSIZE, + .DataINEndpointDoubleBank = false, + + .DataOUTEndpointNumber = CDC_RX_EPNUM, + .DataOUTEndpointSize = CDC_TXRX_EPSIZE, + .DataOUTEndpointDoubleBank = false, + + .NotificationEndpointNumber = CDC_NOTIFICATION_EPNUM, + .NotificationEndpointSize = CDC_NOTIFICATION_EPSIZE, + .NotificationEndpointDoubleBank = false, + }, + }; + +/** Main program entry point. This routine contains the overall program flow, including initial + * setup of all components and the main program loop. + */ +int main(void) +{ + SetupHardware(); + + RingBuffer_InitBuffer(&USBtoUSART_Buffer); + RingBuffer_InitBuffer(&USARTtoUSB_Buffer); + + sei(); + + for (;;) + { + /* Only try to read in bytes from the CDC interface if the transmit buffer is not full */ + if (!(RingBuffer_IsFull(&USBtoUSART_Buffer))) + { + int16_t ReceivedByte = CDC_Device_ReceiveByte(&VirtualSerial_CDC_Interface); + + /* Read bytes from the USB OUT endpoint into the USART transmit buffer */ + if (!(ReceivedByte < 0)) + RingBuffer_Insert(&USBtoUSART_Buffer, ReceivedByte); + } + + /* Check if the UART receive buffer flush timer has expired or the buffer is nearly full */ + RingBuff_Count_t BufferCount = RingBuffer_GetCount(&USARTtoUSB_Buffer); + if ((TIFR0 & (1 << TOV0)) || (BufferCount > BUFFER_NEARLY_FULL)) + { + TIFR0 |= (1 << TOV0); + + if (USARTtoUSB_Buffer.Count) { + LEDs_TurnOnLEDs(LEDMASK_TX); + PulseMSRemaining.TxLEDPulse = TX_RX_LED_PULSE_MS; + } + + /* Read bytes from the USART receive buffer into the USB IN endpoint */ + while (BufferCount--) + CDC_Device_SendByte(&VirtualSerial_CDC_Interface, RingBuffer_Remove(&USARTtoUSB_Buffer)); + + /* Turn off TX LED(s) once the TX pulse period has elapsed */ + if (PulseMSRemaining.TxLEDPulse && !(--PulseMSRemaining.TxLEDPulse)) + LEDs_TurnOffLEDs(LEDMASK_TX); + + /* Turn off RX LED(s) once the RX pulse period has elapsed */ + if (PulseMSRemaining.RxLEDPulse && !(--PulseMSRemaining.RxLEDPulse)) + LEDs_TurnOffLEDs(LEDMASK_RX); + } + + /* Load the next byte from the USART transmit buffer into the USART */ + if (!(RingBuffer_IsEmpty(&USBtoUSART_Buffer))) { + Serial_TxByte(RingBuffer_Remove(&USBtoUSART_Buffer)); + + LEDs_TurnOnLEDs(LEDMASK_RX); + PulseMSRemaining.RxLEDPulse = TX_RX_LED_PULSE_MS; + } + + CDC_Device_USBTask(&VirtualSerial_CDC_Interface); + USB_USBTask(); + } +} + +/** Configures the board hardware and chip peripherals for the demo's functionality. */ +void SetupHardware(void) +{ + /* Disable watchdog if enabled by bootloader/fuses */ + MCUSR &= ~(1 << WDRF); + wdt_disable(); + + /* Hardware Initialization */ + Serial_Init(9600, false); + LEDs_Init(); + USB_Init(); + + /* Start the flush timer so that overflows occur rapidly to push received bytes to the USB interface */ + TCCR0B = (1 << CS02); + + /* Pull target /RESET line high */ + AVR_RESET_LINE_PORT |= AVR_RESET_LINE_MASK; + AVR_RESET_LINE_DDR |= AVR_RESET_LINE_MASK; +} + +/** Event handler for the library USB Configuration Changed event. */ +void EVENT_USB_Device_ConfigurationChanged(void) +{ + CDC_Device_ConfigureEndpoints(&VirtualSerial_CDC_Interface); +} + +/** Event handler for the library USB Unhandled Control Request event. */ +void EVENT_USB_Device_UnhandledControlRequest(void) +{ + CDC_Device_ProcessControlRequest(&VirtualSerial_CDC_Interface); +} + +/** Event handler for the CDC Class driver Line Encoding Changed event. + * + * \param[in] CDCInterfaceInfo Pointer to the CDC class interface configuration structure being referenced + */ +void EVENT_CDC_Device_LineEncodingChanged(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo) +{ + uint8_t ConfigMask = 0; + + switch (CDCInterfaceInfo->State.LineEncoding.ParityType) + { + case CDC_PARITY_Odd: + ConfigMask = ((1 << UPM11) | (1 << UPM10)); + break; + case CDC_PARITY_Even: + ConfigMask = (1 << UPM11); + break; + } + + if (CDCInterfaceInfo->State.LineEncoding.CharFormat == CDC_LINEENCODING_TwoStopBits) + ConfigMask |= (1 << USBS1); + + switch (CDCInterfaceInfo->State.LineEncoding.DataBits) + { + case 6: + ConfigMask |= (1 << UCSZ10); + break; + case 7: + ConfigMask |= (1 << UCSZ11); + break; + case 8: + ConfigMask |= ((1 << UCSZ11) | (1 << UCSZ10)); + break; + } + + /* Must turn off USART before reconfiguring it, otherwise incorrect operation may occur */ + UCSR1B = 0; + UCSR1A = 0; + UCSR1C = 0; + + /* Special case 57600 baud for compatibility with the ATmega328 bootloader. */ + UBRR1 = (CDCInterfaceInfo->State.LineEncoding.BaudRateBPS == 57600) + ? SERIAL_UBBRVAL(CDCInterfaceInfo->State.LineEncoding.BaudRateBPS) + : SERIAL_2X_UBBRVAL(CDCInterfaceInfo->State.LineEncoding.BaudRateBPS); + + UCSR1C = ConfigMask; + UCSR1A = (CDCInterfaceInfo->State.LineEncoding.BaudRateBPS == 57600) ? 0 : (1 << U2X1); + UCSR1B = ((1 << RXCIE1) | (1 << TXEN1) | (1 << RXEN1)); +} + +/** ISR to manage the reception of data from the serial port, placing received bytes into a circular buffer + * for later transmission to the host. + */ +ISR(USART1_RX_vect, ISR_BLOCK) +{ + uint8_t ReceivedByte = UDR1; + + if (USB_DeviceState == DEVICE_STATE_Configured) + RingBuffer_Insert(&USARTtoUSB_Buffer, ReceivedByte); +} + +/** Event handler for the CDC Class driver Host-to-Device Line Encoding Changed event. + * + * \param[in] CDCInterfaceInfo Pointer to the CDC class interface configuration structure being referenced + */ +void EVENT_CDC_Device_ControLineStateChanged(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo) +{ + bool CurrentDTRState = (CDCInterfaceInfo->State.ControlLineStates.HostToDevice & CDC_CONTROL_LINE_OUT_DTR); + + if (CurrentDTRState) + AVR_RESET_LINE_PORT &= ~AVR_RESET_LINE_MASK; + else + AVR_RESET_LINE_PORT |= AVR_RESET_LINE_MASK; +} diff --git a/test/ardmake/hardware/firmwares/arduino-usbserial/Arduino-usbserial.h b/test/ardmake/hardware/firmwares/arduino-usbserial/Arduino-usbserial.h new file mode 100644 index 0000000..99fde39 --- /dev/null +++ b/test/ardmake/hardware/firmwares/arduino-usbserial/Arduino-usbserial.h @@ -0,0 +1,79 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2010. + + dean [at] fourwalledcubicle [dot] com + www.fourwalledcubicle.com +*/ + +/* + Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Header file for Arduino-usbserial.c. + */ + +#ifndef _ARDUINO_USBSERIAL_H_ +#define _ARDUINO_USBSERIAL_H_ + + /* Includes: */ + #include + #include + #include + #include + + #include "Descriptors.h" + + #include "Lib/LightweightRingBuff.h" + + #include + #include + #include + #include + #include + + /* Macros: */ + /** LED mask for the library LED driver, to indicate TX activity. */ + #define LEDMASK_TX LEDS_LED1 + + /** LED mask for the library LED driver, to indicate RX activity. */ + #define LEDMASK_RX LEDS_LED2 + + /** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */ + #define LEDMASK_ERROR (LEDS_LED1 | LEDS_LED2) + + /** LED mask for the library LED driver, to indicate that the USB interface is busy. */ + #define LEDMASK_BUSY (LEDS_LED1 | LEDS_LED2) + + /* Function Prototypes: */ + void SetupHardware(void); + + void EVENT_USB_Device_Connect(void); + void EVENT_USB_Device_Disconnect(void); + void EVENT_USB_Device_ConfigurationChanged(void); + void EVENT_USB_Device_UnhandledControlRequest(void); + + void EVENT_CDC_Device_LineEncodingChanged(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo); + void EVENT_CDC_Device_ControLineStateChanged(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo); + +#endif /* _ARDUINO_USBSERIAL_H_ */ diff --git a/test/ardmake/hardware/firmwares/arduino-usbserial/Board/LEDs.h b/test/ardmake/hardware/firmwares/arduino-usbserial/Board/LEDs.h new file mode 100644 index 0000000..152e8f5 --- /dev/null +++ b/test/ardmake/hardware/firmwares/arduino-usbserial/Board/LEDs.h @@ -0,0 +1,110 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2010. + + dean [at] fourwalledcubicle [dot] com + www.fourwalledcubicle.com +*/ + +/* + Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/* + Board LEDs driver for the Benito board, from www.dorkbotpdx.org. +*/ + +#ifndef __LEDS_ARDUINOUNO_H__ +#define __LEDS_ARDUINOUNO_H__ + + /* Includes: */ + #include + +/* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(INCLUDE_FROM_LEDS_H) + #error Do not include this file directly. Include LUFA/Drivers/Board/LEDS.h instead. + #endif + + /* Public Interface - May be used in end-application: */ + /* Macros: */ + /** LED mask for the first LED on the board. */ + #define LEDS_LED1 (1 << 5) + + /** LED mask for the second LED on the board. */ + #define LEDS_LED2 (1 << 4) + + /** LED mask for all the LEDs on the board. */ + #define LEDS_ALL_LEDS (LEDS_LED1 | LEDS_LED2) + + /** LED mask for the none of the board LEDs */ + #define LEDS_NO_LEDS 0 + + /* Inline Functions: */ + #if !defined(__DOXYGEN__) + static inline void LEDs_Init(void) + { + DDRD |= LEDS_ALL_LEDS; + PORTD |= LEDS_ALL_LEDS; + } + + static inline void LEDs_TurnOnLEDs(const uint8_t LEDMask) + { + PORTD &= ~LEDMask; + } + + static inline void LEDs_TurnOffLEDs(const uint8_t LEDMask) + { + PORTD |= LEDMask; + } + + static inline void LEDs_SetAllLEDs(const uint8_t LEDMask) + { + PORTD = ((PORTD | LEDS_ALL_LEDS) & ~LEDMask); + } + + static inline void LEDs_ChangeLEDs(const uint8_t LEDMask, const uint8_t ActiveMask) + { + PORTD = ((PORTD | ActiveMask) & ~LEDMask); + } + + static inline void LEDs_ToggleLEDs(const uint8_t LEDMask) + { + PORTD ^= LEDMask; + } + + static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT; + static inline uint8_t LEDs_GetLEDs(void) + { + return (PORTD & LEDS_ALL_LEDS); + } + #endif + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif diff --git a/test/ardmake/hardware/firmwares/arduino-usbserial/Descriptors.c b/test/ardmake/hardware/firmwares/arduino-usbserial/Descriptors.c new file mode 100644 index 0000000..705dddf --- /dev/null +++ b/test/ardmake/hardware/firmwares/arduino-usbserial/Descriptors.c @@ -0,0 +1,277 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2010. + + dean [at] fourwalledcubicle [dot] com + www.fourwalledcubicle.com +*/ + +/* + Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * USB Device Descriptors, for library use when in USB device mode. Descriptors are special + * computer-readable structures which the host requests upon device enumeration, to determine + * the device's capabilities and functions. + */ + +#include "Descriptors.h" + +/* On some devices, there is a factory set internal serial number which can be automatically sent to the host as + * the device's serial number when the Device Descriptor's .SerialNumStrIndex entry is set to USE_INTERNAL_SERIAL. + * This allows the host to track a device across insertions on different ports, allowing them to retain allocated + * resources like COM port numbers and drivers. On demos using this feature, give a warning on unsupported devices + * so that the user can supply their own serial number descriptor instead or remove the USE_INTERNAL_SERIAL value + * from the Device Descriptor (forcing the host to generate a serial number for each device from the VID, PID and + * port location). + */ +#if (USE_INTERNAL_SERIAL == NO_DESCRIPTOR) + #warning USE_INTERNAL_SERIAL is not available on this AVR - please manually construct a device serial descriptor. +#endif + +/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall + * device characteristics, including the supported USB version, control endpoint size and the + * number of device configurations. The descriptor is read out by the USB host when the enumeration + * process begins. + */ +USB_Descriptor_Device_t PROGMEM DeviceDescriptor = +{ + .Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device}, + + .USBSpecification = VERSION_BCD(01.10), + .Class = 0x02, + .SubClass = 0x00, + .Protocol = 0x00, + + .Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE, + + .VendorID = 0x03EB, // Atmel + + .ProductID = 0x204B, // LUFA USB to Serial Demo Application + .ReleaseNumber = 0x0001, + + .ManufacturerStrIndex = 0x01, + .ProductStrIndex = 0x02, + .SerialNumStrIndex = USE_INTERNAL_SERIAL, + + .NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS +}; + +/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage + * of the device in one of its supported configurations, including information about any device interfaces + * and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting + * a configuration so that the host may correctly communicate with the USB device. + */ +USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = +{ + .Config = + { + .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration}, + + .TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t), + .TotalInterfaces = 2, + + .ConfigurationNumber = 1, + .ConfigurationStrIndex = NO_DESCRIPTOR, + + .ConfigAttributes = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED), + + .MaxPowerConsumption = USB_CONFIG_POWER_MA(100) + }, + + .CDC_CCI_Interface = + { + .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, + + .InterfaceNumber = 0, + .AlternateSetting = 0, + + .TotalEndpoints = 1, + + .Class = 0x02, + .SubClass = 0x02, + .Protocol = 0x01, + + .InterfaceStrIndex = NO_DESCRIPTOR + }, + + .CDC_Functional_IntHeader = + { + .Header = {.Size = sizeof(CDC_FUNCTIONAL_DESCRIPTOR(2)), .Type = 0x24}, + .SubType = 0x00, + + .Data = {0x01, 0x10} + }, + + .CDC_Functional_AbstractControlManagement = + { + .Header = {.Size = sizeof(CDC_FUNCTIONAL_DESCRIPTOR(1)), .Type = 0x24}, + .SubType = 0x02, + + .Data = {0x06} + }, + + .CDC_Functional_Union = + { + .Header = {.Size = sizeof(CDC_FUNCTIONAL_DESCRIPTOR(2)), .Type = 0x24}, + .SubType = 0x06, + + .Data = {0x00, 0x01} + }, + + .CDC_NotificationEndpoint = + { + .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, + + .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC_NOTIFICATION_EPNUM), + .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), + .EndpointSize = CDC_NOTIFICATION_EPSIZE, + .PollingIntervalMS = 0xFF + }, + + .CDC_DCI_Interface = + { + .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, + + .InterfaceNumber = 1, + .AlternateSetting = 0, + + .TotalEndpoints = 2, + + .Class = 0x0A, + .SubClass = 0x00, + .Protocol = 0x00, + + .InterfaceStrIndex = NO_DESCRIPTOR + }, + + .CDC_DataOutEndpoint = + { + .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, + + .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_OUT | CDC_RX_EPNUM), + .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), + .EndpointSize = CDC_TXRX_EPSIZE, + .PollingIntervalMS = 0x01 + }, + + .CDC_DataInEndpoint = + { + .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, + + .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC_TX_EPNUM), + .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), + .EndpointSize = CDC_TXRX_EPSIZE, + .PollingIntervalMS = 0x01 + } +}; + +/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests + * the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate + * via the language ID table available at USB.org what languages the device supports for its string descriptors. + */ +USB_Descriptor_String_t PROGMEM LanguageString = +{ + .Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String}, + + .UnicodeString = {LANGUAGE_ID_ENG} +}; + +/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable + * form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device + * Descriptor. + */ +USB_Descriptor_String_t PROGMEM ManufacturerString = +{ + .Header = {.Size = USB_STRING_LEN(24), .Type = DTYPE_String}, + + .UnicodeString = L"Arduino (www.arduino.cc)" +}; + +/** Product descriptor string. This is a Unicode string containing the product's details in human readable form, + * and is read out upon request by the host when the appropriate string ID is requested, listed in the Device + * Descriptor. + */ +USB_Descriptor_String_t PROGMEM ProductString = +{ + #if (ARDUINO_MODEL_PID == ARDUINO_UNO_PID) + .Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String}, + + .UnicodeString = L"Arduino Uno" + #elif (ARDUINO_MODEL_PID == ARDUINO_MEGA2560_PID) + .Header = {.Size = USB_STRING_LEN(17), .Type = DTYPE_String}, + + .UnicodeString = L"Arduino Mega 2560" + #endif + +}; + +/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors" + * documentation) by the application code so that the address and size of a requested descriptor can be given + * to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function + * is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the + * USB host. + */ +uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, + const uint8_t wIndex, + void** const DescriptorAddress) +{ + const uint8_t DescriptorType = (wValue >> 8); + const uint8_t DescriptorNumber = (wValue & 0xFF); + + void* Address = NULL; + uint16_t Size = NO_DESCRIPTOR; + + switch (DescriptorType) + { + case DTYPE_Device: + Address = (void*)&DeviceDescriptor; + Size = sizeof(USB_Descriptor_Device_t); + break; + case DTYPE_Configuration: + Address = (void*)&ConfigurationDescriptor; + Size = sizeof(USB_Descriptor_Configuration_t); + break; + case DTYPE_String: + switch (DescriptorNumber) + { + case 0x00: + Address = (void*)&LanguageString; + Size = pgm_read_byte(&LanguageString.Header.Size); + break; + case 0x01: + Address = (void*)&ManufacturerString; + Size = pgm_read_byte(&ManufacturerString.Header.Size); + break; + case 0x02: + Address = (void*)&ProductString; + Size = pgm_read_byte(&ProductString.Header.Size); + break; + } + + break; + } + + *DescriptorAddress = Address; + return Size; +} diff --git a/test/ardmake/hardware/firmwares/arduino-usbserial/Descriptors.h b/test/ardmake/hardware/firmwares/arduino-usbserial/Descriptors.h new file mode 100644 index 0000000..3ac4e52 --- /dev/null +++ b/test/ardmake/hardware/firmwares/arduino-usbserial/Descriptors.h @@ -0,0 +1,88 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2010. + + dean [at] fourwalledcubicle [dot] com + www.fourwalledcubicle.com +*/ + +/* + Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Header file for Descriptors.c. + */ + +#ifndef _DESCRIPTORS_H_ +#define _DESCRIPTORS_H_ + + /* Includes: */ + #include + + #include + #include + + /* Product-specific definitions: */ + #define ARDUINO_UNO_PID 0x0001 + #define ARDUINO_MEGA2560_PID 0x0010 + + /* Macros: */ + /** Endpoint number of the CDC device-to-host notification IN endpoint. */ + #define CDC_NOTIFICATION_EPNUM 2 + + /** Endpoint number of the CDC device-to-host data IN endpoint. */ + #define CDC_TX_EPNUM 3 + + /** Endpoint number of the CDC host-to-device data OUT endpoint. */ + #define CDC_RX_EPNUM 4 + + /** Size in bytes of the CDC device-to-host notification IN endpoint. */ + #define CDC_NOTIFICATION_EPSIZE 8 + + /** Size in bytes of the CDC data IN and OUT endpoints. */ + #define CDC_TXRX_EPSIZE 64 + + /* Type Defines: */ + /** Type define for the device configuration descriptor structure. This must be defined in the + * application code, as the configuration descriptor contains several sub-descriptors which + * vary between devices, and which describe the device's usage to the host. + */ + typedef struct + { + USB_Descriptor_Configuration_Header_t Config; + USB_Descriptor_Interface_t CDC_CCI_Interface; + CDC_FUNCTIONAL_DESCRIPTOR(2) CDC_Functional_IntHeader; + CDC_FUNCTIONAL_DESCRIPTOR(1) CDC_Functional_AbstractControlManagement; + CDC_FUNCTIONAL_DESCRIPTOR(2) CDC_Functional_Union; + USB_Descriptor_Endpoint_t CDC_NotificationEndpoint; + USB_Descriptor_Interface_t CDC_DCI_Interface; + USB_Descriptor_Endpoint_t CDC_DataOutEndpoint; + USB_Descriptor_Endpoint_t CDC_DataInEndpoint; + } USB_Descriptor_Configuration_t; + + /* Function Prototypes: */ + uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, + const uint8_t wIndex, + void** const DescriptorAddress) ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3); + +#endif diff --git a/test/ardmake/hardware/firmwares/arduino-usbserial/Lib/LightweightRingBuff.h b/test/ardmake/hardware/firmwares/arduino-usbserial/Lib/LightweightRingBuff.h new file mode 100644 index 0000000..fb48c1f --- /dev/null +++ b/test/ardmake/hardware/firmwares/arduino-usbserial/Lib/LightweightRingBuff.h @@ -0,0 +1,197 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2010. + + dean [at] fourwalledcubicle [dot] com + www.fourwalledcubicle.com +*/ + +/* + Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Ultra lightweight ring buffer, for fast insertion/deletion. + */ + +#ifndef _ULW_RING_BUFF_H_ +#define _ULW_RING_BUFF_H_ + + /* Includes: */ + #include + + #include + #include + + /* Defines: */ + /** Size of each ring buffer, in data elements - must be between 1 and 255. */ + #define BUFFER_SIZE 128 + + /** Maximum number of data elements to buffer before forcing a flush. + * Must be less than BUFFER_SIZE + */ + #define BUFFER_NEARLY_FULL 96 + + /** Type of data to store into the buffer. */ + #define RingBuff_Data_t uint8_t + + /** Datatype which may be used to store the count of data stored in a buffer, retrieved + * via a call to \ref RingBuffer_GetCount(). + */ + #if (BUFFER_SIZE <= 0xFF) + #define RingBuff_Count_t uint8_t + #else + #define RingBuff_Count_t uint16_t + #endif + + /* Type Defines: */ + /** Type define for a new ring buffer object. Buffers should be initialized via a call to + * \ref RingBuffer_InitBuffer() before use. + */ + typedef struct + { + RingBuff_Data_t Buffer[BUFFER_SIZE]; /**< Internal ring buffer data, referenced by the buffer pointers. */ + RingBuff_Data_t* In; /**< Current storage location in the circular buffer */ + RingBuff_Data_t* Out; /**< Current retrieval location in the circular buffer */ + RingBuff_Count_t Count; + } RingBuff_t; + + /* Inline Functions: */ + /** Initializes a ring buffer ready for use. Buffers must be initialized via this function + * before any operations are called upon them. Already initialized buffers may be reset + * by re-initializing them using this function. + * + * \param[out] Buffer Pointer to a ring buffer structure to initialize + */ + static inline void RingBuffer_InitBuffer(RingBuff_t* const Buffer) + { + ATOMIC_BLOCK(ATOMIC_RESTORESTATE) + { + Buffer->In = Buffer->Buffer; + Buffer->Out = Buffer->Buffer; + } + } + + /** Retrieves the minimum number of bytes stored in a particular buffer. This value is computed + * by entering an atomic lock on the buffer while the IN and OUT locations are fetched, so that + * the buffer cannot be modified while the computation takes place. This value should be cached + * when reading out the contents of the buffer, so that as small a time as possible is spent + * in an atomic lock. + * + * \note The value returned by this function is guaranteed to only be the minimum number of bytes + * stored in the given buffer; this value may change as other threads write new data and so + * the returned number should be used only to determine how many successive reads may safely + * be performed on the buffer. + * + * \param[in] Buffer Pointer to a ring buffer structure whose count is to be computed + */ + static inline RingBuff_Count_t RingBuffer_GetCount(RingBuff_t* const Buffer) + { + RingBuff_Count_t Count; + + ATOMIC_BLOCK(ATOMIC_RESTORESTATE) + { + Count = Buffer->Count; + } + + return Count; + } + + /** Atomically determines if the specified ring buffer contains any free space. This should + * be tested before storing data to the buffer, to ensure that no data is lost due to a + * buffer overrun. + * + * \param[in,out] Buffer Pointer to a ring buffer structure to insert into + * + * \return Boolean true if the buffer contains no free space, false otherwise + */ + static inline bool RingBuffer_IsFull(RingBuff_t* const Buffer) + { + return (RingBuffer_GetCount(Buffer) == BUFFER_SIZE); + } + + /** Atomically determines if the specified ring buffer contains any data. This should + * be tested before removing data from the buffer, to ensure that the buffer does not + * underflow. + * + * If the data is to be removed in a loop, store the total number of bytes stored in the + * buffer (via a call to the \ref RingBuffer_GetCount() function) in a temporary variable + * to reduce the time spent in atomicity locks. + * + * \param[in,out] Buffer Pointer to a ring buffer structure to insert into + * + * \return Boolean true if the buffer contains no free space, false otherwise + */ + static inline bool RingBuffer_IsEmpty(RingBuff_t* const Buffer) + { + return (RingBuffer_GetCount(Buffer) == 0); + } + + /** Inserts an element into the ring buffer. + * + * \note Only one execution thread (main program thread or an ISR) may insert into a single buffer + * otherwise data corruption may occur. Insertion and removal may occur from different execution + * threads. + * + * \param[in,out] Buffer Pointer to a ring buffer structure to insert into + * \param[in] Data Data element to insert into the buffer + */ + static inline void RingBuffer_Insert(RingBuff_t* const Buffer, + const RingBuff_Data_t Data) + { + *Buffer->In = Data; + + if (++Buffer->In == &Buffer->Buffer[BUFFER_SIZE]) + Buffer->In = Buffer->Buffer; + + ATOMIC_BLOCK(ATOMIC_RESTORESTATE) + { + Buffer->Count++; + } + } + + /** Removes an element from the ring buffer. + * + * \note Only one execution thread (main program thread or an ISR) may remove from a single buffer + * otherwise data corruption may occur. Insertion and removal may occur from different execution + * threads. + * + * \param[in,out] Buffer Pointer to a ring buffer structure to retrieve from + * + * \return Next data element stored in the buffer + */ + static inline RingBuff_Data_t RingBuffer_Remove(RingBuff_t* const Buffer) + { + RingBuff_Data_t Data = *Buffer->Out; + + if (++Buffer->Out == &Buffer->Buffer[BUFFER_SIZE]) + Buffer->Out = Buffer->Buffer; + + ATOMIC_BLOCK(ATOMIC_RESTORESTATE) + { + Buffer->Count--; + } + + return Data; + } + +#endif diff --git a/test/ardmake/hardware/firmwares/arduino-usbserial/makefile b/test/ardmake/hardware/firmwares/arduino-usbserial/makefile new file mode 100644 index 0000000..79d6be2 --- /dev/null +++ b/test/ardmake/hardware/firmwares/arduino-usbserial/makefile @@ -0,0 +1,776 @@ +# Hey Emacs, this is a -*- makefile -*- +#---------------------------------------------------------------------------- +# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al. +# >> Modified for use with the LUFA project. << +# +# Released to the Public Domain +# +# Additional material for this makefile was written by: +# Peter Fleury +# Tim Henigan +# Colin O'Flynn +# Reiner Patommel +# Markus Pfaff +# Sander Pool +# Frederik Rouleau +# Carlos Lamas +# Dean Camera +# Opendous Inc. +# Denver Gingerich +# +#---------------------------------------------------------------------------- +# On command line: +# +# make all = Make software. +# +# make clean = Clean out built project files. +# +# make coff = Convert ELF to AVR COFF. +# +# make extcoff = Convert ELF to AVR Extended COFF. +# +# make program = Download the hex file to the device, using avrdude. +# Please customize the avrdude settings below first! +# +# make dfu = Download the hex file to the device, using dfu-programmer (must +# have dfu-programmer installed). +# +# make flip = Download the hex file to the device, using Atmel FLIP (must +# have Atmel FLIP installed). +# +# make dfu-ee = Download the eeprom file to the device, using dfu-programmer +# (must have dfu-programmer installed). +# +# make flip-ee = Download the eeprom file to the device, using Atmel FLIP +# (must have Atmel FLIP installed). +# +# make doxygen = Generate DoxyGen documentation for the project (must have +# DoxyGen installed) +# +# make debug = Start either simulavr or avarice as specified for debugging, +# with avr-gdb or avr-insight as the front end for debugging. +# +# make filename.s = Just compile filename.c into the assembler code only. +# +# make filename.i = Create a preprocessed source file for use in submitting +# bug reports to the GCC project. +# +# To rebuild project do "make clean" then "make all". +#---------------------------------------------------------------------------- + +# MCU name(s) +# Since the ATMEGA8U2 part is not directly supported by the current +# versions of either avrdude or dfu-programmer, we specify a dummy +# part; AT90USB82 which is close enough in memory size and organization +MCU = atmega8u2 +MCU_AVRDUDE = at90usb82 +MCU_DFU = at90usb82 + +# Specify the Arduino model using the assigned PID. This is used by Descriptors.c +# to set PID and product descriptor string +# Uno PID: +ARDUINO_MODEL_PID = 0x0001 +# Mega 2560 PID: +#ARDUINO_MODEL_PID = 0x0010 + + +# Target board (see library "Board Types" documentation, NONE for projects not requiring +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# "Board" inside the application directory. +BOARD = USER + + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_CLOCK below, as it is sourced by +# F_CLOCK after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# Input clock frequency. +# This will define a symbol, F_CLOCK, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_CLOCK = $(F_CPU) + + +# Output format. (can be srec, ihex, binary) +FORMAT = ihex + + +# Target file name (without extension). +TARGET = Arduino-usbserial + + +# Object files directory +# To put object files in current directory, use a dot (.), do NOT make +# this an empty or blank macro! +OBJDIR = . + + +# Path to the LUFA library +LUFA_PATH = ../.. + + +# LUFA library compile-time options +LUFA_OPTS = -D USB_DEVICE_ONLY +LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8 +LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 +LUFA_OPTS += -D USE_FLASH_DESCRIPTORS +LUFA_OPTS += -D INTERRUPT_CONTROL_ENDPOINT +LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0 +LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" + + +# Create the LUFA source path variables by including the LUFA root makefile +include $(LUFA_PATH)/LUFA/makefile + + +# List C source files here. (C dependencies are automatically generated.) +SRC = $(TARGET).c \ + Descriptors.c \ + $(LUFA_SRC_USB) \ + $(LUFA_SRC_USBCLASS) \ + $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Device.c \ + $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Endpoint.c \ + $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/HostStandardReq.c \ + $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Host.c \ + $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Pipe.c \ + $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/USBController.c \ + $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/Events.c \ + $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/USBInterrupt.c \ + $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBTask.c \ + $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/DeviceStandardReq.c \ + $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/ConfigDescriptor.c \ + $(LUFA_PATH)/LUFA/Drivers/USB/Class/Device/CDC.c \ + $(LUFA_PATH)/LUFA/Drivers/USB/Class/Host/CDC.c + + +# List C++ source files here. (C dependencies are automatically generated.) +CPPSRC = + + +# List Assembler source files here. +# Make them always end in a capital .S. Files ending in a lowercase .s +# will not be considered source files but generated files (assembler +# output from the compiler), and will be deleted upon "make clean"! +# Even though the DOS/Win* filesystem matches both .s and .S the same, +# it will preserve the spelling of the filenames, and gcc itself does +# care about how the name is spelled on its command-line. +ASRC = + + +# Optimization level, can be [0, 1, 2, 3, s]. +# 0 = turn off optimization. s = optimize for size. +# (Note: 3 is not always the best optimization level. See avr-libc FAQ.) +OPT = s + + +# Debugging format. +# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs. +# AVR Studio 4.10 requires dwarf-2. +# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run. +DEBUG = dwarf-2 + + +# List any extra directories to look for include files here. +# Each directory must be seperated by a space. +# Use forward slashes for directory separators. +# For a directory that has spaces, enclose it in quotes. +EXTRAINCDIRS = $(LUFA_PATH)/ + + +# Compiler flag to set the C Standard level. +# c89 = "ANSI" C +# gnu89 = c89 plus GCC extensions +# c99 = ISO C99 standard (not yet fully implemented) +# gnu99 = c99 plus GCC extensions +CSTANDARD = -std=gnu99 + + +# Place -D or -U options here for C sources +CDEFS = -DF_CPU=$(F_CPU)UL +CDEFS += -DF_CLOCK=$(F_CLOCK)UL +CDEFS += -DARDUINO_MODEL_PID=$(ARDUINO_MODEL_PID) +CDEFS += -DBOARD=BOARD_$(BOARD) +CDEFS += $(LUFA_OPTS) +CDEFS += -DAVR_RESET_LINE_PORT="PORTD" +CDEFS += -DAVR_RESET_LINE_DDR="DDRD" +CDEFS += -DAVR_RESET_LINE_MASK="(1 << 7)" +CDEFS += -DTX_RX_LED_PULSE_MS=3 +CDEFS += -DPING_PONG_LED_PULSE_MS=100 + +# Place -D or -U options here for ASM sources +ADEFS = -DF_CPU=$(F_CPU) +ADEFS += -DF_CLOCK=$(F_CLOCK)UL +ADEFS += -DBOARD=BOARD_$(BOARD) +ADEFS += $(LUFA_OPTS) + +# Place -D or -U options here for C++ sources +CPPDEFS = -DF_CPU=$(F_CPU)UL +CPPDEFS += -DF_CLOCK=$(F_CLOCK)UL +CPPDEFS += -DBOARD=BOARD_$(BOARD) +CPPDEFS += $(LUFA_OPTS) +#CPPDEFS += -D__STDC_LIMIT_MACROS +#CPPDEFS += -D__STDC_CONSTANT_MACROS + + + +#---------------- Compiler Options C ---------------- +# -g*: generate debugging information +# -O*: optimization level +# -f...: tuning, see GCC manual and avr-libc documentation +# -Wall...: warning level +# -Wa,...: tell GCC to pass this to the assembler. +# -adhlns...: create assembler listing +CFLAGS = -g$(DEBUG) +CFLAGS += $(CDEFS) +CFLAGS += -O$(OPT) +CFLAGS += -funsigned-char +CFLAGS += -funsigned-bitfields +CFLAGS += -ffunction-sections +CFLAGS += -fno-inline-small-functions +CFLAGS += -fpack-struct +CFLAGS += -fshort-enums +CFLAGS += -fno-strict-aliasing +CFLAGS += -Wall +CFLAGS += -Wstrict-prototypes +#CFLAGS += -mshort-calls +#CFLAGS += -fno-unit-at-a-time +#CFLAGS += -Wundef +#CFLAGS += -Wunreachable-code +#CFLAGS += -Wsign-compare +CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst) +CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) +CFLAGS += $(CSTANDARD) + + +#---------------- Compiler Options C++ ---------------- +# -g*: generate debugging information +# -O*: optimization level +# -f...: tuning, see GCC manual and avr-libc documentation +# -Wall...: warning level +# -Wa,...: tell GCC to pass this to the assembler. +# -adhlns...: create assembler listing +CPPFLAGS = -g$(DEBUG) +CPPFLAGS += $(CPPDEFS) +CPPFLAGS += -O$(OPT) +CPPFLAGS += -funsigned-char +CPPFLAGS += -funsigned-bitfields +CPPFLAGS += -fpack-struct +CPPFLAGS += -fshort-enums +CPPFLAGS += -fno-exceptions +CPPFLAGS += -Wall +CPPFLAGS += -Wundef +CFLAGS += -Wundef +#CPPFLAGS += -mshort-calls +#CPPFLAGS += -fno-unit-at-a-time +#CPPFLAGS += -Wstrict-prototypes +#CPPFLAGS += -Wunreachable-code +#CPPFLAGS += -Wsign-compare +CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst) +CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) +#CPPFLAGS += $(CSTANDARD) + + +#---------------- Assembler Options ---------------- +# -Wa,...: tell GCC to pass this to the assembler. +# -adhlns: create listing +# -gstabs: have the assembler create line number information; note that +# for use in COFF files, additional information about filenames +# and function names needs to be present in the assembler source +# files -- see avr-libc docs [FIXME: not yet described there] +# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# dump that will be displayed for a given single line of source input. +ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 + + +#---------------- Library Options ---------------- +# Minimalistic printf version +PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min + +# Floating point printf version (requires MATH_LIB = -lm below) +PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt + +# If this is left blank, then it will use the Standard printf version. +PRINTF_LIB = +#PRINTF_LIB = $(PRINTF_LIB_MIN) +#PRINTF_LIB = $(PRINTF_LIB_FLOAT) + + +# Minimalistic scanf version +SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min + +# Floating point + %[ scanf version (requires MATH_LIB = -lm below) +SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt + +# If this is left blank, then it will use the Standard scanf version. +SCANF_LIB = +#SCANF_LIB = $(SCANF_LIB_MIN) +#SCANF_LIB = $(SCANF_LIB_FLOAT) + + +MATH_LIB = -lm + + +# List any extra directories to look for libraries here. +# Each directory must be seperated by a space. +# Use forward slashes for directory separators. +# For a directory that has spaces, enclose it in quotes. +EXTRALIBDIRS = + + + +#---------------- External Memory Options ---------------- + +# 64 KB of external RAM, starting after internal RAM (ATmega128!), +# used for variables (.data/.bss) and heap (malloc()). +#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff + +# 64 KB of external RAM, starting after internal RAM (ATmega128!), +# only used for heap (malloc()). +#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff + +EXTMEMOPTS = + + + +#---------------- Linker Options ---------------- +# -Wl,...: tell GCC to pass this to linker. +# -Map: create map file +# --cref: add cross reference to map file +LDFLAGS = -Wl,-Map=$(TARGET).map,--cref +LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--gc-sections +LDFLAGS += $(EXTMEMOPTS) +LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) +LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB) +#LDFLAGS += -T linker_script.x + + + +#---------------- Programming Options (avrdude) ---------------- + +# Programming hardware +# Type: avrdude -c ? +# to get a full listing. +# +AVRDUDE_PROGRAMMER = avrispmkii + +# com1 = serial port. Use lpt1 to connect to parallel port. +AVRDUDE_PORT = usb + +AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex +#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep + + +# Uncomment the following if you want avrdude's erase cycle counter. +# Note that this counter needs to be initialized first using -Yn, +# see avrdude manual. +#AVRDUDE_ERASE_COUNTER = -y + +# Uncomment the following if you do /not/ wish a verification to be +# performed after programming the device. +#AVRDUDE_NO_VERIFY = -V + +# Increase verbosity level. Please use this when submitting bug +# reports about avrdude. See +# to submit bug reports. +#AVRDUDE_VERBOSE = -v -v + +AVRDUDE_FORCE = -F + +AVRDUDE_FLAGS = -p $(MCU_AVRDUDE) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) +AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY) +AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE) +AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER) +AVRDUDE_FLAGS += $(AVRDUDE_FORCE) + + + +#---------------- Debugging Options ---------------- + +# For simulavr only - target MCU frequency. +DEBUG_MFREQ = $(F_CPU) + +# Set the DEBUG_UI to either gdb or insight. +# DEBUG_UI = gdb +DEBUG_UI = insight + +# Set the debugging back-end to either avarice, simulavr. +DEBUG_BACKEND = avarice +#DEBUG_BACKEND = simulavr + +# GDB Init Filename. +GDBINIT_FILE = __avr_gdbinit + +# When using avarice settings for the JTAG +JTAG_DEV = /dev/com1 + +# Debugging port used to communicate between GDB / avarice / simulavr. +DEBUG_PORT = 4242 + +# Debugging host used to communicate between GDB / avarice / simulavr, normally +# just set to localhost unless doing some sort of crazy debugging when +# avarice is running on a different computer. +DEBUG_HOST = localhost + + + +#============================================================================ + + +# Define programs and commands. +SHELL = sh +CC = avr-gcc +OBJCOPY = avr-objcopy +OBJDUMP = avr-objdump +SIZE = avr-size +AR = avr-ar rcs +NM = avr-nm +AVRDUDE = avrdude +REMOVE = rm -f +REMOVEDIR = rm -rf +COPY = cp +WINSHELL = cmd + +# Define Messages +# English +MSG_ERRORS_NONE = Errors: none +MSG_BEGIN = -------- begin -------- +MSG_END = -------- end -------- +MSG_SIZE_BEFORE = Size before: +MSG_SIZE_AFTER = Size after: +MSG_COFF = Converting to AVR COFF: +MSG_EXTENDED_COFF = Converting to AVR Extended COFF: +MSG_FLASH = Creating load file for Flash: +MSG_EEPROM = Creating load file for EEPROM: +MSG_EXTENDED_LISTING = Creating Extended Listing: +MSG_SYMBOL_TABLE = Creating Symbol Table: +MSG_LINKING = Linking: +MSG_COMPILING = Compiling C: +MSG_COMPILING_CPP = Compiling C++: +MSG_ASSEMBLING = Assembling: +MSG_CLEANING = Cleaning project: +MSG_CREATING_LIBRARY = Creating library: + + + + +# Define all object files. +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) + +# Define all listing files. +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) + + +# Compiler flags to generate dependency files. +GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d + + +# Combine all necessary flags and optional flags. +# Add target processor to flags. +ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS) +ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS) +ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) + + + + + +# Default target. +#all: begin gccversion sizebefore build checkinvalidevents showliboptions showtarget sizeafter end +all: begin gccversion sizebefore build showliboptions showtarget sizeafter end + +# Change the build target to build a HEX file or a library. +build: elf hex eep lss sym asm +#build: lib + + +elf: $(TARGET).elf +hex: $(TARGET).hex +eep: $(TARGET).eep +lss: $(TARGET).lss +sym: $(TARGET).sym +asm: $(TARGET).s +LIBNAME=lib$(TARGET).a +lib: $(LIBNAME) + + + +# Eye candy. +# AVR Studio 3.x does not check make's exit code but relies on +# the following magic strings to be generated by the compile job. +begin: + @echo + @echo $(MSG_BEGIN) + +end: + @echo $(MSG_END) + @echo + + +# Display size of file. +HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex +ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf +MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) ) +FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr ) + +sizebefore: + @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \ + 2>/dev/null; echo; fi + +sizeafter: + @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ + 2>/dev/null; echo; fi + +#$(LUFA_PATH)/LUFA/LUFA_Events.lst: +# @make -C $(LUFA_PATH)/LUFA/ LUFA_Events.lst + +#checkinvalidevents: $(LUFA_PATH)/LUFA/LUFA_Events.lst +# @echo +# @echo Checking for invalid events... +# @$(shell) avr-nm $(OBJ) | sed -n -e 's/^.*EVENT_/EVENT_/p' | \ +# grep -F -v --file=$(LUFA_PATH)/LUFA/LUFA_Events.lst > InvalidEvents.tmp || true +# @sed -n -e 's/^/ WARNING - INVALID EVENT NAME: /p' InvalidEvents.tmp +# @if test -s InvalidEvents.tmp; then exit 1; fi + +showliboptions: + @echo + @echo ---- Compile Time Library Options ---- + @for i in $(LUFA_OPTS:-D%=%); do \ + echo $$i; \ + done + @echo -------------------------------------- + +showtarget: + @echo + @echo --------- Target Information --------- + @echo AVR Model: $(MCU) + @echo Board: $(BOARD) + @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master + @echo -------------------------------------- + + +# Display compiler version information. +gccversion : + @$(CC) --version + + +# Program the device. +program: $(TARGET).hex $(TARGET).eep + $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) + +flip: $(TARGET).hex + batchisp -hardware usb -device $(MCU_DFU) -operation erase f + batchisp -hardware usb -device $(MCU_DFU) -operation loadbuffer $(TARGET).hex program + batchisp -hardware usb -device $(MCU_DFU) -operation start reset 0 + +dfu: $(TARGET).hex + dfu-programmer $(MCU_DFU) erase + dfu-programmer $(MCU_DFU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU_DFU) reset + + +flip-ee: $(TARGET).hex $(TARGET).eep + $(COPY) $(TARGET).eep $(TARGET)eep.hex + batchisp -hardware usb -device $(MCU_DFU) -operation memory EEPROM erase + batchisp -hardware usb -device $(MCU_DFU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program + batchisp -hardware usb -device $(MCU_DFU) -operation start reset 0 + $(REMOVE) $(TARGET)eep.hex + +dfu-ee: $(TARGET).hex $(TARGET).eep + dfu-programmer $(MCU_DFU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU_DFU) reset + + +# Generate avr-gdb config/init file which does the following: +# define the reset signal, load the target file, connect to target, and set +# a breakpoint at main(). +gdb-config: + @$(REMOVE) $(GDBINIT_FILE) + @echo define reset >> $(GDBINIT_FILE) + @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) + @echo end >> $(GDBINIT_FILE) + @echo file $(TARGET).elf >> $(GDBINIT_FILE) + @echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE) +ifeq ($(DEBUG_BACKEND),simulavr) + @echo load >> $(GDBINIT_FILE) +endif + @echo break main >> $(GDBINIT_FILE) + +debug: gdb-config $(TARGET).elf +ifeq ($(DEBUG_BACKEND), avarice) + @echo Starting AVaRICE - Press enter when "waiting to connect" message displays. + @$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \ + $(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT) + @$(WINSHELL) /c pause + +else + @$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \ + $(DEBUG_MFREQ) --port $(DEBUG_PORT) +endif + @$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE) + + + + +# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB. +COFFCONVERT = $(OBJCOPY) --debugging +COFFCONVERT += --change-section-address .data-0x800000 +COFFCONVERT += --change-section-address .bss-0x800000 +COFFCONVERT += --change-section-address .noinit-0x800000 +COFFCONVERT += --change-section-address .eeprom-0x810000 + + + +coff: $(TARGET).elf + @echo + @echo $(MSG_COFF) $(TARGET).cof + $(COFFCONVERT) -O coff-avr $< $(TARGET).cof + + +extcoff: $(TARGET).elf + @echo + @echo $(MSG_EXTENDED_COFF) $(TARGET).cof + $(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof + + + +# Create final output files (.hex, .eep) from ELF output file. +%.hex: %.elf + @echo + @echo $(MSG_FLASH) $@ + $(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock $< $@ + +%.eep: %.elf + @echo + @echo $(MSG_EEPROM) $@ + -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \ + --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0 + +# Create extended listing file from ELF output file. +%.lss: %.elf + @echo + @echo $(MSG_EXTENDED_LISTING) $@ + $(OBJDUMP) -h -S -z $< > $@ + +# Create a symbol table from ELF output file. +%.sym: %.elf + @echo + @echo $(MSG_SYMBOL_TABLE) $@ + $(NM) -n $< > $@ + + + +# Create library from object files. +.SECONDARY : $(TARGET).a +.PRECIOUS : $(OBJ) +%.a: $(OBJ) + @echo + @echo $(MSG_CREATING_LIBRARY) $@ + $(AR) $@ $(OBJ) + + +# Link: create ELF output file from object files. +.SECONDARY : $(TARGET).elf +.PRECIOUS : $(OBJ) +%.elf: $(OBJ) + @echo + @echo $(MSG_LINKING) $@ + $(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS) + + +# Compile: create object files from C source files. +$(OBJDIR)/%.o : %.c + @echo + @echo $(MSG_COMPILING) $< + $(CC) -c $(ALL_CFLAGS) $< -o $@ + + +# Compile: create object files from C++ source files. +$(OBJDIR)/%.o : %.cpp + @echo + @echo $(MSG_COMPILING_CPP) $< + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + + +# Compile: create assembler files from C source files. +%.s : %.c + $(CC) -S $(ALL_CFLAGS) $< -o $@ + + +# Compile: create assembler files from C++ source files. +%.s : %.cpp + $(CC) -S $(ALL_CPPFLAGS) $< -o $@ + + +# Assemble: create object files from assembler source files. +$(OBJDIR)/%.o : %.S + @echo + @echo $(MSG_ASSEMBLING) $< + $(CC) -c $(ALL_ASFLAGS) $< -o $@ + + +# Create preprocessed source for use in sending a bug report. +%.i : %.c + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + + +# Target: clean project. +clean: begin clean_list clean_binary end + +clean_binary: + $(REMOVE) $(TARGET).hex + +clean_list: + @echo $(MSG_CLEANING) + $(REMOVE) $(TARGET).hex + $(REMOVE) $(TARGET).eep + $(REMOVE) $(TARGET).cof + $(REMOVE) $(TARGET).elf + $(REMOVE) $(TARGET).map + $(REMOVE) $(TARGET).sym + $(REMOVE) $(TARGET).lss + $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o) + $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst) + $(REMOVE) $(SRC:.c=.s) + $(REMOVE) $(SRC:.c=.d) + $(REMOVE) $(SRC:.c=.i) + $(REMOVEDIR) .dep + +doxygen: + @echo Generating Project Documentation... + @doxygen Doxygen.conf + @echo Documentation Generation Complete. + +clean_doxygen: + rm -rf Documentation + +# Create object files directory +$(shell mkdir $(OBJDIR) 2>/dev/null) + + +# Include the dependency files. +-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*) + + +# Listing of phony targets. +.PHONY : all begin finish end sizebefore sizeafter gccversion \ +build elf hex eep lss sym coff extcoff doxygen clean \ +clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ +debug gdb-config diff --git a/test/ardmake/hardware/firmwares/arduino-usbserial/readme.txt b/test/ardmake/hardware/firmwares/arduino-usbserial/readme.txt new file mode 100644 index 0000000..289326b --- /dev/null +++ b/test/ardmake/hardware/firmwares/arduino-usbserial/readme.txt @@ -0,0 +1,13 @@ +To setup the project and upload the Arduino usbserial application firmware to an ATMEGA8U2 using the Arduino USB DFU bootloader: +1. unpack the source into LUFA's Projects directory +2. set ARDUINO_MODEL_PID in the makefile as appropriate +3. do "make clean; make" +4. put the 8U2 into USB DFU mode: +4.a. assert and hold the 8U2's RESET line +4.b. assert and hold the 8U2's HWB line +4.c. release the 8U2's RESET line +4.d. release the 8U2's HWB line +5. confirm that the board enumerates as either "Arduino Uno DFU" or "Arduino Mega 2560 DFU" +6. do "make dfu" (OS X or Linux - dfu-programmer must be installed first) or "make flip" (Windows - Flip must be installed first) + +Check that the board enumerates as either "Arduino Uno" or "Arduino Mega 2560". Test by uploading a new Arduino sketch from the Arduino IDE. diff --git a/test/ardmake/hardware/programmers.txt b/test/ardmake/hardware/programmers.txt new file mode 100644 index 0000000..466f602 --- /dev/null +++ b/test/ardmake/hardware/programmers.txt @@ -0,0 +1,20 @@ +avrisp.name=AVR ISP +avrisp.communication=serial +avrisp.protocol=stk500v1 + +avrispmkii.name=AVRISP mkII +avrispmkii.communication=usb +avrispmkii.protocol=stk500v2 + +usbtinyisp.name=USBtinyISP +usbtinyisp.protocol=usbtiny + +parallel.name=Parallel Programmer +parallel.protocol=dapa +parallel.force=true +# parallel.delay=200 + +arduinoisp.name=Arduino as ISP +arduinoisp.communication=serial +arduinoisp.protocol=stk500v1 +arduinoisp.speed=19200 -- cgit v1.2.3