From 66dcf910bd4744d8ced56cb9586aa937a1a2d4c5 Mon Sep 17 00:00:00 2001 From: vg Date: Tue, 7 Jul 2020 16:24:01 +0200 Subject: first commit --- test/ardmake/hardware/firmwares/README.txt | 33 ++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) create mode 100644 test/ardmake/hardware/firmwares/README.txt (limited to 'test/ardmake/hardware/firmwares/README.txt') diff --git a/test/ardmake/hardware/firmwares/README.txt b/test/ardmake/hardware/firmwares/README.txt new file mode 100644 index 0000000..386dcf0 --- /dev/null +++ b/test/ardmake/hardware/firmwares/README.txt @@ -0,0 +1,33 @@ +Arduino Uno and Mega 2560 Firmwares for the ATmega8U2 + +This directory contains the firmwares used on the ATmega8U2 on the Arduino +Uno and Arduino Mega 2560. The arduino-usbdfu directory contains the DFU +bootloader on the 8U2; the arduino-usbserial directory contains the actual +usb to serial firmware. Both should be compiled against LUFA 100807. The +two .hex files in this directory combine the dfu and serial firmwares into +a single file to burn onto the 8U2. + +To burn (Uno): +avrdude -p at90usb82 -F -P usb -c avrispmkii -U flash:w:UNO-dfu_and_usbserial_combined.hex -U lfuse:w:0xFF:m -U hfuse:w:0xD9:m -U efuse:w:0xF4:m -U lock:w:0x0F:m + +To burn (Mega 2560): +avrdude -p at90usb82 -F -P usb -c avrispmkii -U flash:w:MEGA-dfu_and_usbserial_combined.hex -U lfuse:w:0xFF:m -U hfuse:w:0xD9:m -U efuse:w:0xF4:m -U lock:w:0x0F:m + + +Note on USB Vendor IDs (VID) and Product IDs (PID): The arduino-usbdfu +project uses Atmel's VID and MCU-specific PIDs to maintain compatibility +with their FLIP software. The source code to the arduino-usbserial +project includes Atmel's VID and a PID donated by them to LUFA. This +PID is used in LUFA's USBtoSerial project, which forms the basis for +arduino-usbserial. According to the LUFA documentation, this VID/PID +combination is: + + "For use in testing of LUFA powered devices during development only, + by non-commercial entities. All devices must accept collisions on this + VID/PID range (from other in-development LUFA devices) to be resolved + by using a unique release number in the Device Descriptor. No devices + using this VID/PID combination may be released to the general public." + +The production version of the arduino-usbserial firmware uses the +Arduino VID. This is only for use with official Arduino hardware and +should not be used on other products. \ No newline at end of file -- cgit v1.2.3