From 66dcf910bd4744d8ced56cb9586aa937a1a2d4c5 Mon Sep 17 00:00:00 2001 From: vg Date: Tue, 7 Jul 2020 16:24:01 +0200 Subject: first commit --- .../ardmake/hardware/bootloaders/stk500v2/Makefile | 588 ++++++ .../hardware/bootloaders/stk500v2/STK500V2.pnproj | 1 + .../hardware/bootloaders/stk500v2/STK500V2.pnps | 1 + .../bootloaders/stk500v2/avrinterruptnames.h | 742 ++++++++ .../hardware/bootloaders/stk500v2/command.h | 114 ++ .../hardware/bootloaders/stk500v2/stk500boot.c | 1996 ++++++++++++++++++++ .../hardware/bootloaders/stk500v2/stk500boot.ppg | 1 + .../stk500v2/stk500boot_v2_mega2560.hex | 513 +++++ 8 files changed, 3956 insertions(+) create mode 100644 test/ardmake/hardware/bootloaders/stk500v2/Makefile create mode 100644 test/ardmake/hardware/bootloaders/stk500v2/STK500V2.pnproj create mode 100644 test/ardmake/hardware/bootloaders/stk500v2/STK500V2.pnps create mode 100644 test/ardmake/hardware/bootloaders/stk500v2/avrinterruptnames.h create mode 100644 test/ardmake/hardware/bootloaders/stk500v2/command.h create mode 100644 test/ardmake/hardware/bootloaders/stk500v2/stk500boot.c create mode 100644 test/ardmake/hardware/bootloaders/stk500v2/stk500boot.ppg create mode 100644 test/ardmake/hardware/bootloaders/stk500v2/stk500boot_v2_mega2560.hex (limited to 'test/ardmake/hardware/bootloaders/stk500v2') diff --git a/test/ardmake/hardware/bootloaders/stk500v2/Makefile b/test/ardmake/hardware/bootloaders/stk500v2/Makefile new file mode 100644 index 0000000..54c5f85 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/stk500v2/Makefile @@ -0,0 +1,588 @@ +# ---------------------------------------------------------------------------- +# Makefile to compile and link stk500boot bootloader +# Author: Peter Fleury +# File: $Id: Makefile,v 1.3 2006/03/04 19:26:17 peter Exp $ +# based on WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al. +# +# Adjust F_CPU below to the clock frequency in Mhz of your AVR target +# Adjust BOOTLOADER_ADDRESS to your AVR target +# +#---------------------------------------------------------------------------- +# On command line: +# +# make all = Make software. +# +# make clean = Clean out built project files. +# +# make coff = Convert ELF to AVR COFF. +# +# make extcoff = Convert ELF to AVR Extended COFF. +# +# make program = Download the hex file to the device, using avrdude. +# Please customize the avrdude settings below first! +# +# make debug = Start either simulavr or avarice as specified for debugging, +# with avr-gdb or avr-insight as the front end for debugging. +# +# make filename.s = Just compile filename.c into the assembler code only. +# +# make filename.i = Create a preprocessed source file for use in submitting +# bug reports to the GCC project. +# +# To rebuild project do "make clean" then "make all". +#---------------------------------------------------------------------------- +# = Mark Sproul msproul-at-skychariot.com + + +# MCU name +#MCU = atmega128 + + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +#F_CPU = 16000000 + + +# Bootloader +# Please adjust if using a different AVR +# 0x0e00*2=0x1C00 for ATmega8 512 words Boot Size +# 0xFC00*2=0x1F800 for ATmega128 1024 words Boot Size +# 0xF800*2=0x1F000 for ATmega1280 +# 0xF000*2=0x1E000 for ATmega1280 +#BOOTLOADER_ADDRESS = 1E000 + + +# Output format. (can be srec, ihex, binary) +FORMAT = ihex + + +# Target file name (without extension). +TARGET = stk500boot + + +# List C source files here. (C dependencies are automatically generated.) +SRC = stk500boot.c + + +# List Assembler source files here. +# Make them always end in a capital .S. Files ending in a lowercase .s +# will not be considered source files but generated files (assembler +# output from the compiler), and will be deleted upon "make clean"! +# Even though the DOS/Win* filesystem matches both .s and .S the same, +# it will preserve the spelling of the filenames, and gcc itself does +# care about how the name is spelled on its command-line. +ASRC = + + +# Optimization level, can be [0, 1, 2, 3, s]. +# 0 = turn off optimization. s = optimize for size. +# (Note: 3 is not always the best optimization level. See avr-libc FAQ.) +OPT = s + + +# Debugging format. +# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs. +# AVR Studio 4.10 requires dwarf-2. +# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run. +DEBUG = dwarf-2 + + +# List any extra directories to look for include files here. +# Each directory must be seperated by a space. +# Use forward slashes for directory separators. +# For a directory that has spaces, enclose it in quotes. +EXTRAINCDIRS = + + +# Compiler flag to set the C Standard level. +# c89 = "ANSI" C +# gnu89 = c89 plus GCC extensions +# c99 = ISO C99 standard (not yet fully implemented) +# gnu99 = c99 plus GCC extensions +CSTANDARD = -std=gnu99 + + +# Place -D or -U options here +CDEFS = -DF_CPU=$(F_CPU)UL + + +# Place -I options here +CINCS = + + + +#---------------- Compiler Options ---------------- +# -g*: generate debugging information +# -O*: optimization level +# -f...: tuning, see GCC manual and avr-libc documentation +# -Wall...: warning level +# -Wa,...: tell GCC to pass this to the assembler. +# -adhlns...: create assembler listing +CFLAGS = -g$(DEBUG) +CFLAGS += $(CDEFS) $(CINCS) +CFLAGS += -O$(OPT) +CFLAGS += -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums -mno-tablejump +CFLAGS += -Wall -Wstrict-prototypes +CFLAGS += -Wa,-adhlns=$(<:.c=.lst) +CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) +CFLAGS += $(CSTANDARD) + + +#---------------- Assembler Options ---------------- +# -Wa,...: tell GCC to pass this to the assembler. +# -ahlms: create listing +# -gstabs: have the assembler create line number information; note that +# for use in COFF files, additional information about filenames +# and function names needs to be present in the assembler source +# files -- see avr-libc docs [FIXME: not yet described there] +ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs + + +#---------------- Library Options ---------------- +# Minimalistic printf version +PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min + +# Floating point printf version (requires MATH_LIB = -lm below) +PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt + +# If this is left blank, then it will use the Standard printf version. +PRINTF_LIB = +#PRINTF_LIB = $(PRINTF_LIB_MIN) +#PRINTF_LIB = $(PRINTF_LIB_FLOAT) + + +# Minimalistic scanf version +SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min + +# Floating point + %[ scanf version (requires MATH_LIB = -lm below) +SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt + +# If this is left blank, then it will use the Standard scanf version. +SCANF_LIB = +#SCANF_LIB = $(SCANF_LIB_MIN) +#SCANF_LIB = $(SCANF_LIB_FLOAT) + + +MATH_LIB = -lm + + + +#---------------- External Memory Options ---------------- + +# 64 KB of external RAM, starting after internal RAM (ATmega128!), +# used for variables (.data/.bss) and heap (malloc()). +#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff + +# 64 KB of external RAM, starting after internal RAM (ATmega128!), +# only used for heap (malloc()). +#EXTMEMOPTS = -Wl,--defsym=__heap_start=0x801100,--defsym=__heap_end=0x80ffff + +EXTMEMOPTS = + + + + +#---------------- Linker Options ---------------- +# -Wl,...: tell GCC to pass this to linker. +# -Map: create map file +# --cref: add cross reference to map file +LDFLAGS = -Wl,-Map=$(TARGET).map,--cref +LDFLAGS += $(EXTMEMOPTS) +LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB) + + +#--------------- bootloader linker Options ------- +# BOOTLOADER_ADDRESS (=Start of Boot Loader section +# in bytes - not words) is defined above. +#LDFLAGS += -Wl,--section-start=.text=$(BOOTLOADER_ADDRESS) -nostartfiles -nodefaultlibs +#LDFLAGS += -Wl,--section-start=.text=$(BOOTLOADER_ADDRESS) -nostartfiles +LDFLAGS += -Wl,--section-start=.text=$(BOOTLOADER_ADDRESS) + +#---------------- Programming Options (avrdude) ---------------- + +# Programming hardware: alf avr910 avrisp bascom bsd +# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500 +# +# Type: avrdude -c ? +# to get a full listing. +# +AVRDUDE_PROGRAMMER = stk500v2 + +# com1 = serial port. Use lpt1 to connect to parallel port. +AVRDUDE_PORT = com1 # programmer connected to serial device + +AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex +#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep + + +# Uncomment the following if you want avrdude's erase cycle counter. +# Note that this counter needs to be initialized first using -Yn, +# see avrdude manual. +#AVRDUDE_ERASE_COUNTER = -y + +# Uncomment the following if you do /not/ wish a verification to be +# performed after programming the device. +#AVRDUDE_NO_VERIFY = -V + +# Increase verbosity level. Please use this when submitting bug +# reports about avrdude. See +# to submit bug reports. +#AVRDUDE_VERBOSE = -v -v + +AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) +AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY) +AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE) +AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER) + + + +#---------------- Debugging Options ---------------- + +# For simulavr only - target MCU frequency. +DEBUG_MFREQ = $(F_CPU) + +# Set the DEBUG_UI to either gdb or insight. +# DEBUG_UI = gdb +DEBUG_UI = insight + +# Set the debugging back-end to either avarice, simulavr. +DEBUG_BACKEND = avarice +#DEBUG_BACKEND = simulavr + +# GDB Init Filename. +GDBINIT_FILE = __avr_gdbinit + +# When using avarice settings for the JTAG +JTAG_DEV = /dev/com1 + +# Debugging port used to communicate between GDB / avarice / simulavr. +DEBUG_PORT = 4242 + +# Debugging host used to communicate between GDB / avarice / simulavr, normally +# just set to localhost unless doing some sort of crazy debugging when +# avarice is running on a different computer. +DEBUG_HOST = localhost + + + +#============================================================================ + + +# Define programs and commands. +SHELL = sh +CC = avr-gcc +OBJCOPY = avr-objcopy +OBJDUMP = avr-objdump +SIZE = avr-size +NM = avr-nm +AVRDUDE = avrdude +REMOVE = rm -f +COPY = cp +WINSHELL = cmd + + +# Define Messages +# English +MSG_ERRORS_NONE = Errors: none +MSG_BEGIN = -------- begin -------- +MSG_END = -------- end -------- +MSG_SIZE_BEFORE = Size before: +MSG_SIZE_AFTER = Size after: +MSG_COFF = Converting to AVR COFF: +MSG_EXTENDED_COFF = Converting to AVR Extended COFF: +MSG_FLASH = Creating load file for Flash: +MSG_EEPROM = Creating load file for EEPROM: +MSG_EXTENDED_LISTING = Creating Extended Listing: +MSG_SYMBOL_TABLE = Creating Symbol Table: +MSG_LINKING = Linking: +MSG_COMPILING = Compiling: +MSG_ASSEMBLING = Assembling: +MSG_CLEANING = Cleaning project: + + + + +# Define all object files. +OBJ = $(SRC:.c=.o) $(ASRC:.S=.o) + +# Define all listing files. +LST = $(SRC:.c=.lst) $(ASRC:.S=.lst) + + +# Compiler flags to generate dependency files. +GENDEPFLAGS = -MD -MP -MF .dep/$(@F).d + + +# Combine all necessary flags and optional flags. +# Add target processor to flags. +ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS) +ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) + + + +############################################################ +# May 25, 2010 Adding 1280 support +mega1280: MCU = atmega1280 +mega1280: F_CPU = 16000000 +mega1280: BOOTLOADER_ADDRESS = 1E000 +mega1280: CFLAGS += -D_MEGA_BOARD_ +mega1280: begin gccversion sizebefore build sizeafter end + mv $(TARGET).hex stk500boot_v2_mega1280.hex + + +############################################################ +# Jul 6, 2010 Adding 2560 support +mega2560: MCU = atmega2560 +mega2560: F_CPU = 16000000 +mega2560: BOOTLOADER_ADDRESS = 3E000 +mega2560: CFLAGS += -D_MEGA_BOARD_ +mega2560: begin gccversion sizebefore build sizeafter end + mv $(TARGET).hex stk500boot_v2_mega2560.hex + + +############################################################ +#Initial config on Amber128 board +# avrdude: Device signature = 0x1e9702 +# avrdude: safemode: lfuse reads as 8F +# avrdude: safemode: hfuse reads as CB +# avrdude: safemode: efuse reads as FF +# Jul 17, 2010 Adding 128 support +############################################################ +amber128: MCU = atmega128 +#amber128: F_CPU = 16000000 +amber128: F_CPU = 14745600 +amber128: BOOTLOADER_ADDRESS = 1E000 +amber128: CFLAGS += -D_BOARD_AMBER128_ +amber128: begin gccversion sizebefore build sizeafter end + mv $(TARGET).hex stk500boot_v2_amber128.hex + +############################################################ +# Aug 23, 2010 Adding atmega2561 support +m2561: MCU = atmega2561 +m2561: F_CPU = 8000000 +m2561: BOOTLOADER_ADDRESS = 3E000 +m2561: CFLAGS += -D_ANDROID_2561_ -DBAUDRATE=57600 +m2561: begin gccversion sizebefore build sizeafter end + mv $(TARGET).hex stk500boot_v2_android2561.hex + + +############################################################ +# avrdude: Device signature = 0x1e9801 +# avrdude: safemode: lfuse reads as EC +# avrdude: safemode: hfuse reads as 18 +# avrdude: safemode: efuse reads as FD +# Aug 23, 2010 Adding cerebot 2560 @ 8mhz +#avrdude -P usb -c usbtiny -p m2560 -v -U flash:w:/Arduino/WiringBootV2_upd1/stk500boot_v2_cerebotplus.hex +############################################################ +cerebot: MCU = atmega2560 +cerebot: F_CPU = 8000000 +cerebot: BOOTLOADER_ADDRESS = 3E000 +cerebot: CFLAGS += -D_CEREBOTPLUS_BOARD_ -DBAUDRATE=38400 -DUART_BAUDRATE_DOUBLE_SPEED=1 +cerebot: begin gccversion sizebefore build sizeafter end + mv $(TARGET).hex stk500boot_v2_cerebotplus.hex + + +############################################################ +# Aug 23, 2010 Adding atmega2561 support +penguino: MCU = atmega32 +penguino: F_CPU = 16000000 +penguino: BOOTLOADER_ADDRESS = 7800 +penguino: CFLAGS += -D_PENGUINO_ -DBAUDRATE=57600 +penguino: begin gccversion sizebefore build sizeafter end + mv $(TARGET).hex stk500boot_v2_penguino.hex + + +# Default target. +all: begin gccversion sizebefore build sizeafter end + +build: elf hex eep lss sym +#build: hex eep lss sym + +elf: $(TARGET).elf +hex: $(TARGET).hex +eep: $(TARGET).eep +lss: $(TARGET).lss +sym: $(TARGET).sym + + + +# Eye candy. +# AVR Studio 3.x does not check make's exit code but relies on +# the following magic strings to be generated by the compile job. +begin: + @echo + @echo $(MSG_BEGIN) + +end: + @echo $(MSG_END) + @echo + + +# Display size of file. +HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex +ELFSIZE = $(SIZE) --format=avr --mcu=$(MCU) $(TARGET).elf + +sizebefore: + @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \ + 2>/dev/null; echo; fi + +sizeafter: + @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ + 2>/dev/null; echo; fi + + + +# Display compiler version information. +gccversion : + @$(CC) --version + + + +# Program the device. +program: $(TARGET).hex $(TARGET).eep + $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) + + +# Generate avr-gdb config/init file which does the following: +# define the reset signal, load the target file, connect to target, and set +# a breakpoint at main(). +gdb-config: + @$(REMOVE) $(GDBINIT_FILE) + @echo define reset >> $(GDBINIT_FILE) + @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) + @echo end >> $(GDBINIT_FILE) + @echo file $(TARGET).elf >> $(GDBINIT_FILE) + @echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE) +ifeq ($(DEBUG_BACKEND),simulavr) + @echo load >> $(GDBINIT_FILE) +endif + @echo break main >> $(GDBINIT_FILE) + +debug: gdb-config $(TARGET).elf +ifeq ($(DEBUG_BACKEND), avarice) + @echo Starting AVaRICE - Press enter when "waiting to connect" message displays. + @$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \ + $(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT) + @$(WINSHELL) /c pause + +else + @$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \ + $(DEBUG_MFREQ) --port $(DEBUG_PORT) +endif + @$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE) + + + + +# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB. +COFFCONVERT=$(OBJCOPY) --debugging \ +--change-section-address .data-0x800000 \ +--change-section-address .bss-0x800000 \ +--change-section-address .noinit-0x800000 \ +--change-section-address .eeprom-0x810000 + + + +coff: $(TARGET).elf + @echo + @echo $(MSG_COFF) $(TARGET).cof + $(COFFCONVERT) -O coff-avr $< $(TARGET).cof + + +extcoff: $(TARGET).elf + @echo + @echo $(MSG_EXTENDED_COFF) $(TARGET).cof + $(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof + + +# Create final output files (.hex, .eep) from ELF output file. +%.hex: %.elf + @echo + @echo $(MSG_FLASH) $@ + $(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@ + +%.eep: %.elf + @echo + @echo $(MSG_EEPROM) $@ + -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \ + --change-section-lma .eeprom=0 -O $(FORMAT) $< $@ + +# Create extended listing file from ELF output file. +%.lss: %.elf + @echo + @echo $(MSG_EXTENDED_LISTING) $@ + $(OBJDUMP) -h -S $< > $@ + +# Create a symbol table from ELF output file. +%.sym: %.elf + @echo + @echo $(MSG_SYMBOL_TABLE) $@ + $(NM) -n $< > $@ + + + +# Link: create ELF output file from object files. +.SECONDARY : $(TARGET).elf +.PRECIOUS : $(OBJ) +%.elf: $(OBJ) + @echo + @echo $(MSG_LINKING) $@ + $(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS) + + +# Compile: create object files from C source files. +%.o : %.c + @echo + @echo $(MSG_COMPILING) $< + $(CC) -c $(ALL_CFLAGS) $< -o $@ + + +# Compile: create assembler files from C source files. +%.s : %.c + $(CC) -S $(ALL_CFLAGS) $< -o $@ + + +# Assemble: create object files from assembler source files. +%.o : %.S + @echo + @echo $(MSG_ASSEMBLING) $< + $(CC) -c $(ALL_ASFLAGS) $< -o $@ + +# Create preprocessed source for use in sending a bug report. +%.i : %.c + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + + +# Target: clean project. +clean: begin clean_list end + +clean_list : + @echo + @echo $(MSG_CLEANING) + $(REMOVE) *.hex + $(REMOVE) *.eep + $(REMOVE) *.cof + $(REMOVE) *.elf + $(REMOVE) *.map + $(REMOVE) *.sym + $(REMOVE) *.lss + $(REMOVE) $(OBJ) + $(REMOVE) $(LST) + $(REMOVE) $(SRC:.c=.s) + $(REMOVE) $(SRC:.c=.d) + $(REMOVE) .dep/* + + + +# Include the dependency files. +-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*) + + +# Listing of phony targets. +.PHONY : all begin finish end sizebefore sizeafter gccversion \ +build elf hex eep lss sym coff extcoff \ +clean clean_list program debug gdb-config + diff --git a/test/ardmake/hardware/bootloaders/stk500v2/STK500V2.pnproj b/test/ardmake/hardware/bootloaders/stk500v2/STK500V2.pnproj new file mode 100644 index 0000000..d935019 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/stk500v2/STK500V2.pnproj @@ -0,0 +1 @@ + \ No newline at end of file diff --git a/test/ardmake/hardware/bootloaders/stk500v2/STK500V2.pnps b/test/ardmake/hardware/bootloaders/stk500v2/STK500V2.pnps new file mode 100644 index 0000000..f85cde5 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/stk500v2/STK500V2.pnps @@ -0,0 +1 @@ + \ No newline at end of file diff --git a/test/ardmake/hardware/bootloaders/stk500v2/avrinterruptnames.h b/test/ardmake/hardware/bootloaders/stk500v2/avrinterruptnames.h new file mode 100644 index 0000000..0ae80f9 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/stk500v2/avrinterruptnames.h @@ -0,0 +1,742 @@ +//************************************************************************************************** +//* +//* interrupt vector names +//* +//* It is important to note that the vector numbers listed here +//* are the ATMEL documentation numbers. The Arduino numbers are 1 less +//* This is because the Atmel docs start numbering the interrupts at 1 +//* when it is actually vector #0 in the table. +//************************************************************************************************** +//* Jun 1, 2010 Added support for ATmega1281 +//* Jun 30, 2010 Putting in more ifdefs to conserve space +//* Jul 3, 2010 More #ifdefs to conserve space and testing on most of my boards +//* Jul 4, 2010 Started using vector defs for #ifdefs as defined in +//* Jul 13, 2010 Added support for __AVR_ATmega128__ +//* Aug 26, 2010 Added support for __AVR_ATmega2561__ +//************************************************************************************************** + +//#include "avrinterruptnames.h" + +//************************************************************************************************** +//* this defines the interrupt vectors and allows us to compile ONLY those strings that are actually +//* in the target CPU. This way we do not have to keep making changes based on cpu, it will be +//* automatic even if we add a new CPU +#ifndef _AVR_IO_H_ + #include +#endif +//************************************************************************************************** + +#ifdef __MWERKS__ + #define prog_char char + #define PGM_P char * +#endif + + prog_char gAvrInt_RESET[] PROGMEM = "RESET"; +#ifdef INT0_vect + prog_char gAvrInt_INT0[] PROGMEM = "INT0"; +#endif +#ifdef INT1_vect + prog_char gAvrInt_INT1[] PROGMEM = "INT1"; +#endif +#ifdef INT2_vect + prog_char gAvrInt_INT2[] PROGMEM = "INT2"; +#endif +#ifdef INT3_vect + prog_char gAvrInt_INT3[] PROGMEM = "INT3"; +#endif +#ifdef INT4_vect + prog_char gAvrInt_INT4[] PROGMEM = "INT4"; +#endif +#ifdef INT5_vect + prog_char gAvrInt_INT5[] PROGMEM = "INT5"; +#endif +#ifdef INT6_vect + prog_char gAvrInt_INT6[] PROGMEM = "INT6"; +#endif +#ifdef INT7_vect + prog_char gAvrInt_INT7[] PROGMEM = "INT7"; +#endif +#ifdef PCINT0_vect + prog_char gAvrInt_PCINT0[] PROGMEM = "PCINT0"; +#endif +#ifdef PCINT1_vect + prog_char gAvrInt_PCINT1[] PROGMEM = "PCINT1"; +#endif +#ifdef PCINT2_vect + prog_char gAvrInt_PCINT2[] PROGMEM = "PCINT2"; +#endif +#ifdef PCINT3_vect + prog_char gAvrInt_PCINT3[] PROGMEM = "PCINT3"; +#endif +#ifdef WDT_vect + prog_char gAvrInt_WDT[] PROGMEM = "WDT"; +#endif +#ifdef TIMER0_COMP_vect + prog_char gAvrInt_TIMER0_COMP[] PROGMEM = "TIMER0 COMP"; +#endif +#ifdef TIMER0_COMPA_vect + prog_char gAvrInt_TIMER0_COMPA[] PROGMEM = "TIMER0 COMPA"; +#endif +#ifdef TIMER0_COMPB_vect + prog_char gAvrInt_TIMER0_COMPB[] PROGMEM = "TIMER0 COMPB"; +#endif +#ifdef TIMER0_OVF_vect + prog_char gAvrInt_TIMER0_OVF[] PROGMEM = "TIMER0 OVF"; +#endif +#ifdef TIMER1_CAPT_vect + prog_char gAvrInt_TIMER1_CAPT[] PROGMEM = "TIMER1 CAPT"; +#endif +#ifdef TIMER1_COMPA_vect + prog_char gAvrInt_TIMER1_COMPA[] PROGMEM = "TIMER1 COMPA"; +#endif +#ifdef TIMER1_COMPB_vect + prog_char gAvrInt_TIMER1_COMPB[] PROGMEM = "TIMER1 COMPB"; +#endif +#ifdef TIMER1_COMPC_vect + prog_char gAvrInt_TIMER1_COMPC[] PROGMEM = "TIMER1 COMPC"; +#endif +#ifdef TIMER1_OVF_vect + prog_char gAvrInt_TIMER1_OVF[] PROGMEM = "TIMER1 OVF"; +#endif +#ifdef TIMER2_COMP_vect + prog_char gAvrInt_TIMER2_COMP[] PROGMEM = "TIMER2 COMP"; +#endif +#ifdef TIMER2_COMPA_vect + prog_char gAvrInt_TIMER2_COMPA[] PROGMEM = "TIMER2 COMPA"; +#endif +#ifdef TIMER2_COMPB_vect + prog_char gAvrInt_TIMER2_COMPB[] PROGMEM = "TIMER2 COMPB"; +#endif +#ifdef TIMER2_OVF_vect + prog_char gAvrInt_TIMER2_OVF[] PROGMEM = "TIMER2 OVF"; +#endif +#ifdef TIMER3_CAPT_vect + prog_char gAvrInt_TIMER3_CAPT[] PROGMEM = "TIMER3 CAPT"; +#endif +#ifdef TIMER3_COMPA_vect + prog_char gAvrInt_TIMER3_COMPA[] PROGMEM = "TIMER3 COMPA"; +#endif +#ifdef TIMER3_COMPB_vect + prog_char gAvrInt_TIMER3_COMPB[] PROGMEM = "TIMER3 COMPB"; +#endif +#ifdef TIMER3_COMPC_vect + prog_char gAvrInt_TIMER3_COMPC[] PROGMEM = "TIMER3 COMPC"; +#endif +#ifdef TIMER3_OVF_vect + prog_char gAvrInt_TIMER3_OVF[] PROGMEM = "TIMER3 OVF"; +#endif +#ifdef TIMER4_CAPT_vect + prog_char gAvrInt_TIMER4_CAPT[] PROGMEM = "TIMER4 CAPT"; +#endif +#ifdef TIMER4_COMPA_vect + prog_char gAvrInt_TIMER4_COMPA[] PROGMEM = "TIMER4 COMPA"; +#endif +#ifdef TIMER4_COMPB_vect + prog_char gAvrInt_TIMER4_COMPB[] PROGMEM = "TIMER4 COMPB"; +#endif +#ifdef TIMER4_COMPC_vect + prog_char gAvrInt_TIMER4_COMPC[] PROGMEM = "TIMER4 COMPC"; +#endif +#ifdef TIMER4_COMPD_vect + prog_char gAvrInt_TIMER4_COMPD[] PROGMEM = "TIMER4 COMPD"; +#endif +#ifdef TIMER4_OVF_vect + prog_char gAvrInt_TIMER4_OVF[] PROGMEM = "TIMER4 OVF"; +#endif +#ifdef TIMER4_FPF_vect + prog_char gAvrInt_TIMER4_FPF[] PROGMEM = "TIMER4 Fault Protection"; +#endif +#ifdef TIMER5_CAPT_vect + prog_char gAvrInt_TIMER5_CAPT[] PROGMEM = "TIMER5 CAPT"; +#endif +#ifdef TIMER5_COMPA_vect + prog_char gAvrInt_TIMER5_COMPA[] PROGMEM = "TIMER5 COMPA"; +#endif +#ifdef TIMER5_COMPB_vect + prog_char gAvrInt_TIMER5_COMPB[] PROGMEM = "TIMER5 COMPB"; +#endif +#ifdef TIMER5_COMPC_vect + prog_char gAvrInt_TIMER5_COMPC[] PROGMEM = "TIMER5 COMPC"; +#endif +#ifdef TIMER5_OVF_vect + prog_char gAvrInt_TIMER5_OVF[] PROGMEM = "TIMER5 OVF"; +#endif + +//* when there is only 1 usart +#if defined(USART_RX_vect) || defined(USART_RXC_vect) + prog_char gAvrInt_USART_RX[] PROGMEM = "USART RX"; +#endif +#if defined(USART_UDRE_vect) + prog_char gAvrInt_USART_UDRE[] PROGMEM = "USART UDRE"; +#endif +#if defined(USART_TX_vect) || defined(USART_TXC_vect) + prog_char gAvrInt_USART_TX[] PROGMEM = "USART TX"; +#endif + + +//* usart 0 +#if defined(USART0_RX_vect) + prog_char gAvrInt_USART0_RX[] PROGMEM = "USART0 RX"; +#endif +#if defined(USART0_UDRE_vect) + prog_char gAvrInt_USART0_UDRE[] PROGMEM = "USART0 UDRE"; +#endif +#if defined(USART0_TX_vect) + prog_char gAvrInt_USART0_TX[] PROGMEM = "USART0 TX"; +#endif + + +//* usart 1 +#ifdef USART1_RX_vect + prog_char gAvrInt_USART1_RX[] PROGMEM = "USART1 RX"; +#endif +#ifdef USART1_UDRE_vect + prog_char gAvrInt_USART1_UDRE[] PROGMEM = "USART1 UDRE"; +#endif +#ifdef USART1_TX_vect + prog_char gAvrInt_USART1_TX[] PROGMEM = "USART1 TX"; +#endif + +//* usart 2 +#ifdef USART2_RX_vect + prog_char gAvrInt_USART2_RX[] PROGMEM = "USART2 RX"; +#endif +#ifdef USART2_UDRE_vect + prog_char gAvrInt_USART2_UDRE[] PROGMEM = "USART2 UDRE"; +#endif +#ifdef USART2_TX_vect + prog_char gAvrInt_USART2_TX[] PROGMEM = "USART2 TX"; +#endif + +//* usart 3 +#ifdef USART3_RX_vect + prog_char gAvrInt_USART3_RX[] PROGMEM = "USART3 RX"; +#endif +#ifdef USART3_UDRE_vect + prog_char gAvrInt_USART3_UDRE[] PROGMEM = "USART3 UDRE"; +#endif +#ifdef USART3_TX_vect + prog_char gAvrInt_USART3_TX[] PROGMEM = "USART3 TX"; +#endif +#ifdef SPI_STC_vect + prog_char gAvrInt_SPI_STC[] PROGMEM = "SPI STC"; +#endif +#ifdef ADC_vect + prog_char gAvrInt_ADC[] PROGMEM = "ADC"; +#endif +#if defined(ANALOG_COMP_vect) || defined(ANA_COMP_vect) + prog_char gAvrInt_ANALOG_COMP[] PROGMEM = "ANALOG COMP"; +#endif +#if defined(EE_READY_vect) || defined(EE_RDY_vect) + prog_char gAvrInt_EE_READY[] PROGMEM = "EE READY"; +#endif +#ifdef TWI_vect + prog_char gAvrInt_TWI[] PROGMEM = "TWI"; +#endif +#if defined(SPM_READY_vect) || defined(SPM_RDY_vect) + prog_char gAvrInt_SPM_READY[] PROGMEM = "SPM READY"; +#endif +#ifdef USI_START_vect + prog_char gAvrInt_USI_START[] PROGMEM = "USI START"; +#endif +#ifdef USI_OVERFLOW_vect + prog_char gAvrInt_USI_OVERFLOW[] PROGMEM = "USI OVERFLOW"; +#endif +#ifdef USB_GEN_vect + prog_char gAvrInt_USB_General[] PROGMEM = "USB General"; +#endif +#ifdef USB_COM_vect + prog_char gAvrInt_USB_Endpoint[] PROGMEM = "USB Endpoint"; +#endif + +#ifdef LCD_vect + prog_char gAvrInt_LCD_StartFrame[] PROGMEM = "LCD Start of Frame"; +#endif + + +//************************************************************************************************** +//* these do not have vector defs and have to be done by CPU type +#if defined(__AVR_ATmega645__ ) || defined(__AVR_ATmega1281__) || defined(__AVR_ATmega2561__) + prog_char gAvrInt_NOT_USED[] PROGMEM = "NOT_USED"; +#endif +#if defined(__AVR_ATmega32U4__) + prog_char gAvrInt_RESERVED[] PROGMEM = "Reserved"; +#endif + + prog_char gAvrInt_END[] PROGMEM = "*"; + + + + + +//************************************************************************************************** +#if defined(__AVR_ATmega168__) || defined(__AVR_ATmega328P__) +#pragma mark __AVR_ATmega168__ / __AVR_ATmega328P__ + +#define _INTERRUPT_NAMES_DEFINED_ + +PGM_P gInterruptNameTable[] PROGMEM = +{ + + gAvrInt_RESET, // 1 + gAvrInt_INT0, // 2 + gAvrInt_INT1, // 3 + gAvrInt_PCINT0, // 4 + gAvrInt_PCINT1, // 5 + gAvrInt_PCINT2, // 6 + gAvrInt_WDT, // 7 + gAvrInt_TIMER2_COMPA, // 8 + gAvrInt_TIMER2_COMPB, // 9 + gAvrInt_TIMER2_OVF, // 10 + gAvrInt_TIMER1_CAPT, // 11 + gAvrInt_TIMER1_COMPA, // 12 + gAvrInt_TIMER1_COMPB, // 13 + gAvrInt_TIMER1_OVF, // 14 + gAvrInt_TIMER0_COMPA, // 15 + gAvrInt_TIMER0_COMPB, // 16 + gAvrInt_TIMER0_OVF, // 17 + gAvrInt_SPI_STC, // 18 + gAvrInt_USART_RX, // 19 + gAvrInt_USART_UDRE, // 20 + gAvrInt_USART_TX, // 21 + gAvrInt_ADC, // 22 + gAvrInt_EE_READY, // 23 + gAvrInt_ANALOG_COMP, // 24 + gAvrInt_TWI, // 25 + gAvrInt_SPM_READY, // 26 +}; + +#endif + +//************************************************************************************************** +#pragma mark __AVR_ATmega169__ +#if defined(__AVR_ATmega169__) + +#define _INTERRUPT_NAMES_DEFINED_ + +PGM_P gInterruptNameTable[] PROGMEM = +{ + + gAvrInt_RESET, // 1 + gAvrInt_INT0, // 2 + gAvrInt_PCINT0, // 3 + gAvrInt_PCINT1, // 4 + gAvrInt_TIMER2_COMP, // 5 + gAvrInt_TIMER2_OVF, // 6 + gAvrInt_TIMER1_CAPT, // 7 + gAvrInt_TIMER1_COMPA, // 8 + gAvrInt_TIMER1_COMPB, // 9 + gAvrInt_TIMER1_OVF, // 10 + gAvrInt_TIMER0_COMP, // 11 + gAvrInt_TIMER0_OVF, // 12 + gAvrInt_SPI_STC, // 13 + gAvrInt_USART0_RX, // 14 + gAvrInt_USART0_UDRE, // 15 + gAvrInt_USART0_TX, // 16 + gAvrInt_USI_START, // 17 + gAvrInt_USI_OVERFLOW, // 18 + gAvrInt_ANALOG_COMP, // 19 + gAvrInt_ADC, // 20 + gAvrInt_EE_READY, // 21 + gAvrInt_SPM_READY, // 22 + gAvrInt_LCD_StartFrame, // 23 + +}; + +#endif + + +//************************************************************************************************** +#if defined(__AVR_ATmega640__) || defined(__AVR_ATmega1280__) || defined(__AVR_ATmega1281__) || defined(__AVR_ATmega2560__) || defined(__AVR_ATmega2561__) +#pragma mark __AVR_ATmega640__ __AVR_ATmega1280__ __AVR_ATmega1281__ __AVR_ATmega2560__ __AVR_ATmega2561__ + +#define _INTERRUPT_NAMES_DEFINED_ + +PGM_P gInterruptNameTable[] PROGMEM = +{ + + gAvrInt_RESET, // 1 + gAvrInt_INT0, // 2 + gAvrInt_INT1, // 3 + gAvrInt_INT2, // 4 + gAvrInt_INT3, // 5 + gAvrInt_INT4, // 6 + gAvrInt_INT5, // 7 + gAvrInt_INT6, // 8 + gAvrInt_INT7, // 9 + gAvrInt_PCINT0, // 10 + gAvrInt_PCINT1, // 11 +#if defined(__AVR_ATmega640__) || defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) + gAvrInt_PCINT2, // 12 +#else + gAvrInt_NOT_USED, // 12 +#endif + gAvrInt_WDT, // 13 + gAvrInt_TIMER2_COMPA, // 14 + gAvrInt_TIMER2_COMPB, // 15 + gAvrInt_TIMER2_OVF, // 16 + gAvrInt_TIMER1_CAPT, // 17 + gAvrInt_TIMER1_COMPA, // 18 + gAvrInt_TIMER1_COMPB, // 19 + gAvrInt_TIMER1_COMPC, // 20 + gAvrInt_TIMER1_OVF, // 21 + gAvrInt_TIMER0_COMPA, // 22 + gAvrInt_TIMER0_COMPB, // 23 + gAvrInt_TIMER0_OVF, // 24 + gAvrInt_SPI_STC, // 25 + + gAvrInt_USART0_RX, // 26 + gAvrInt_USART0_UDRE, // 27 + gAvrInt_USART0_TX, // 28 + gAvrInt_ANALOG_COMP, // 29 + gAvrInt_ADC, // 30 + gAvrInt_EE_READY, // 31 + + gAvrInt_TIMER3_CAPT, // 32 + gAvrInt_TIMER3_COMPA, // 33 + gAvrInt_TIMER3_COMPB, // 34 + gAvrInt_TIMER3_COMPC, // 35 + gAvrInt_TIMER3_OVF, // 36 + + gAvrInt_USART1_RX, // 37 + gAvrInt_USART1_UDRE, // 38 + gAvrInt_USART1_TX, // 39 + gAvrInt_TWI, // 40 + gAvrInt_SPM_READY, // 41 +#if defined(__AVR_ATmega640__) || defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) + gAvrInt_TIMER4_CAPT, // 42 +#else + gAvrInt_NOT_USED, // 42 +#endif + gAvrInt_TIMER4_COMPA, // 43 + gAvrInt_TIMER4_COMPB, // 44 + gAvrInt_TIMER4_COMPC, // 45 + gAvrInt_TIMER4_OVF, // 46 +#if defined(__AVR_ATmega640__) || defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) + gAvrInt_TIMER5_CAPT, // 47 +#else + gAvrInt_NOT_USED, // 47 +#endif + gAvrInt_TIMER5_COMPA, // 48 + gAvrInt_TIMER5_COMPB, // 49 + gAvrInt_TIMER5_COMPC, // 50 + gAvrInt_TIMER5_OVF, // 51 + +#if defined(__AVR_ATmega640__) || defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) + gAvrInt_USART2_RX, // 52 + gAvrInt_USART2_UDRE, // 53 + gAvrInt_USART2_TX, // 54 + + gAvrInt_USART3_RX, // 55 + gAvrInt_USART3_UDRE, // 56 + gAvrInt_USART3_TX, // 57 +#endif + +}; + +#endif + + + +//************************************************************************************************** +#if defined(__AVR_ATmega324P__ ) || defined(__AVR_ATmega644__ ) || defined(__AVR_ATmega644P__) || defined(__AVR_ATmega1284P__) +#pragma mark __AVR_ATmega324P__ __AVR_ATmega644__ __AVR_ATmega644P__ __AVR_ATmega1284P__ + +#define _INTERRUPT_NAMES_DEFINED_ + +PGM_P gInterruptNameTable[] PROGMEM = +{ + + gAvrInt_RESET, // 1 + gAvrInt_INT0, // 2 + gAvrInt_INT1, // 3 + gAvrInt_INT2, // 4 + gAvrInt_PCINT0, // 5 + gAvrInt_PCINT1, // 6 + gAvrInt_PCINT2, // 7 + gAvrInt_PCINT3, // 8 + gAvrInt_WDT, // 9 + gAvrInt_TIMER2_COMPA, // 10 + gAvrInt_TIMER2_COMPB, // 11 + gAvrInt_TIMER2_OVF, // 12 + gAvrInt_TIMER1_CAPT, // 13 + gAvrInt_TIMER1_COMPA, // 14 + gAvrInt_TIMER1_COMPB, // 15 + gAvrInt_TIMER1_OVF, // 16 + gAvrInt_TIMER0_COMPA, // 17 + gAvrInt_TIMER0_COMPB, // 18 + gAvrInt_TIMER0_OVF, // 19 + gAvrInt_SPI_STC, // 20 + gAvrInt_USART0_RX, // 21 + gAvrInt_USART0_UDRE, // 22 + gAvrInt_USART0_TX, // 23 + gAvrInt_ANALOG_COMP, // 24 + gAvrInt_ADC, // 25 + gAvrInt_EE_READY, // 26 + gAvrInt_TWI, // 27 + gAvrInt_SPM_READY, // 28 + +#if defined(__AVR_ATmega324P__ ) || defined(__AVR_ATmega644P__) + gAvrInt_USART1_RX, // 29 + gAvrInt_USART1_UDRE, // 30 + gAvrInt_USART1_TX, // 31 +#endif + +}; + + +#endif + +//************************************************************************************************** +#if defined(__AVR_ATmega645__ ) +#pragma mark __AVR_ATmega645__ + +#define _INTERRUPT_NAMES_DEFINED_ + +PGM_P gInterruptNameTable[] PROGMEM = +{ + + gAvrInt_RESET, // 1 + gAvrInt_INT0, // 2 + gAvrInt_PCINT0, // 3 + gAvrInt_PCINT1, // 4 + gAvrInt_TIMER2_COMP, // 5 + gAvrInt_TIMER2_OVF, // 6 + gAvrInt_TIMER1_CAPT, // 7 + gAvrInt_TIMER1_COMPA, // 8 + gAvrInt_TIMER1_COMPB, // 9 + gAvrInt_TIMER1_OVF, // 10 + gAvrInt_TIMER0_COMP, // 11 + gAvrInt_TIMER0_OVF, // 12 + gAvrInt_SPI_STC, // 13 + gAvrInt_USART0_RX, // 14 + gAvrInt_USART0_UDRE, // 15 + gAvrInt_USART0_TX, // 16 + gAvrInt_USI_START, // 17 + gAvrInt_USI_OVERFLOW, // 18 + gAvrInt_ANALOG_COMP, // 19 + gAvrInt_ADC, // 20 + gAvrInt_EE_READY, // 21 + gAvrInt_SPM_READY, // 22 + gAvrInt_NOT_USED, // 23 + +#if defined(__AVR_ATmega3250__) || defined(__AVR_ATmega6450__) + gAvrInt_PCINT2, // 24 + gAvrInt_PCINT3, // 25 +#endif +}; + + +#endif + + +//************************************************************************************************** +#if defined(__AVR_ATmega32__ ) +#pragma mark __AVR_ATmega32__ + +#define _INTERRUPT_NAMES_DEFINED_ + +PGM_P gInterruptNameTable[] PROGMEM = +{ + + gAvrInt_RESET, // 1 + gAvrInt_INT0, // 2 + gAvrInt_INT1, // 3 + gAvrInt_INT2, // 4 + gAvrInt_TIMER2_COMP, // 5 + gAvrInt_TIMER2_OVF, // 6 + gAvrInt_TIMER1_CAPT, // 7 + gAvrInt_TIMER1_COMPA, // 8 + gAvrInt_TIMER1_COMPB, // 9 + gAvrInt_TIMER1_OVF, // 10 + gAvrInt_TIMER0_COMP, // 11 + gAvrInt_TIMER0_OVF, // 12 + gAvrInt_SPI_STC, // 13 + gAvrInt_USART_RX, // 14 + gAvrInt_USART_UDRE, // 15 + gAvrInt_USART_TX, // 16 + gAvrInt_ADC, // 17 + gAvrInt_EE_READY, // 18 + gAvrInt_ANALOG_COMP, // 19 + gAvrInt_TWI, // 20 + gAvrInt_SPM_READY, // 21 + +}; + + +#endif + +//************************************************************************************************** +#if defined(__AVR_ATmega32U4__) +#pragma mark __AVR_ATmega32U4__ +//* teensy 2.0 +//* http://www.pjrc.com/teensy/pinout.html +#define _INTERRUPT_NAMES_DEFINED_ + + +PGM_P gInterruptNameTable[] PROGMEM = +{ + + gAvrInt_RESET, // 1 + gAvrInt_INT0, // 2 + gAvrInt_INT1, // 3 + gAvrInt_INT2, // 4 + gAvrInt_INT3, // 5 + gAvrInt_RESERVED, // 6 + gAvrInt_RESERVED, // 7 + gAvrInt_INT6, // 8 + gAvrInt_RESERVED, // 9 + gAvrInt_PCINT0, // 10 + gAvrInt_USB_General, // 11 + gAvrInt_USB_Endpoint, // 12 + gAvrInt_WDT, // 13 + gAvrInt_RESERVED, // 14 + gAvrInt_RESERVED, // 15 + gAvrInt_RESERVED, // 16 + gAvrInt_TIMER1_CAPT, // 17 + gAvrInt_TIMER1_COMPA, // 18 + gAvrInt_TIMER1_COMPB, // 19 + gAvrInt_TIMER1_COMPC, // 20 + gAvrInt_TIMER1_OVF, // 21 + gAvrInt_TIMER0_COMPA, // 22 + gAvrInt_TIMER0_COMPB, // 23 + gAvrInt_TIMER0_OVF, // 24 + gAvrInt_SPI_STC, // 25 + + gAvrInt_USART1_RX, // 26 + gAvrInt_USART1_UDRE, // 27 + gAvrInt_USART1_TX, // 28 + gAvrInt_ANALOG_COMP, // 29 + + gAvrInt_ADC, // 30 + gAvrInt_EE_READY, // 31 + + gAvrInt_TIMER3_CAPT, // 32 + gAvrInt_TIMER3_COMPA, // 33 + gAvrInt_TIMER3_COMPB, // 34 + gAvrInt_TIMER3_COMPC, // 35 + gAvrInt_TIMER3_OVF, // 36 + gAvrInt_TWI, // 37 + gAvrInt_SPM_READY, // 38 + + gAvrInt_TIMER4_COMPA, // 39 + gAvrInt_TIMER4_COMPB, // 40 + gAvrInt_TIMER4_COMPD, // 41 + gAvrInt_TIMER4_OVF, // 42 + gAvrInt_TIMER4_FPF, // 43 +}; + +#endif + +//************************************************************************************************** +#if defined(__AVR_AT90USB1286__) +#pragma mark __AVR_AT90USB1286__ +//* teensy++ 2.0 +//* http://www.pjrc.com/teensy/pinout.html +#define _INTERRUPT_NAMES_DEFINED_ + + +PGM_P gInterruptNameTable[] PROGMEM = +{ + + gAvrInt_RESET, // 1 + gAvrInt_INT0, // 2 + gAvrInt_INT1, // 3 + gAvrInt_INT2, // 4 + gAvrInt_INT3, // 5 + gAvrInt_INT4, // 6 + gAvrInt_INT5, // 7 + gAvrInt_INT6, // 8 + gAvrInt_INT7, // 9 + gAvrInt_PCINT0, // 10 + gAvrInt_USB_General, // 11 + gAvrInt_USB_Endpoint, // 12 + gAvrInt_WDT, // 13 + gAvrInt_TIMER2_COMPA, // 14 + gAvrInt_TIMER2_COMPB, // 15 + gAvrInt_TIMER2_OVF, // 16 + gAvrInt_TIMER1_CAPT, // 17 + gAvrInt_TIMER1_COMPA, // 18 + gAvrInt_TIMER1_COMPB, // 19 + gAvrInt_TIMER1_COMPC, // 20 + gAvrInt_TIMER1_OVF, // 21 + gAvrInt_TIMER0_COMPA, // 22 + gAvrInt_TIMER0_COMPB, // 23 + gAvrInt_TIMER0_OVF, // 24 + gAvrInt_SPI_STC, // 25 + + gAvrInt_USART1_RX, // 26 + gAvrInt_USART1_UDRE, // 27 + gAvrInt_USART1_TX, // 28 + gAvrInt_ANALOG_COMP, // 29 + + gAvrInt_ADC, // 30 + gAvrInt_EE_READY, // 31 + + gAvrInt_TIMER3_CAPT, // 32 + gAvrInt_TIMER3_COMPA, // 33 + gAvrInt_TIMER3_COMPB, // 34 + gAvrInt_TIMER3_COMPC, // 35 + gAvrInt_TIMER3_OVF, // 36 + gAvrInt_TWI, // 37 + gAvrInt_SPM_READY, // 38 + +}; + +#endif + + + + +//************************************************************************************************** +#if defined(__AVR_ATmega128__) +#pragma mark __AVR_ATmega128__ +#define _INTERRUPT_NAMES_DEFINED_ + + +PGM_P gInterruptNameTable[] PROGMEM = +{ + + gAvrInt_RESET, // 1 + gAvrInt_INT0, // 2 + gAvrInt_INT1, // 3 + gAvrInt_INT2, // 4 + gAvrInt_INT3, // 5 + gAvrInt_INT4, // 6 + gAvrInt_INT5, // 7 + gAvrInt_INT6, // 8 + gAvrInt_INT7, // 9 + gAvrInt_TIMER2_COMP, // 10 + gAvrInt_TIMER2_OVF, // 11 + gAvrInt_TIMER1_CAPT, // 12 + gAvrInt_TIMER1_COMPA, // 13 + gAvrInt_TIMER1_COMPB, // 14 + gAvrInt_TIMER1_OVF, // 15 + gAvrInt_TIMER0_COMP, // 16 + gAvrInt_TIMER0_OVF, // 17 + gAvrInt_SPI_STC, // 18 + gAvrInt_USART0_RX, // 19 + gAvrInt_USART0_UDRE, // 20 + gAvrInt_USART0_TX, // 21 + gAvrInt_ADC, // 22 + gAvrInt_EE_READY, // 23 + gAvrInt_ANALOG_COMP, // 24 + gAvrInt_TIMER1_COMPC, // 25 + gAvrInt_TIMER3_CAPT, // 26 + gAvrInt_TIMER3_COMPA, // 27 + gAvrInt_TIMER3_COMPB, // 28 + gAvrInt_TIMER3_COMPC, // 29 + gAvrInt_TIMER3_OVF, // 30 + gAvrInt_USART1_RX, // 31 + gAvrInt_USART1_UDRE, // 32 + gAvrInt_USART1_TX, // 33 + gAvrInt_TWI, // 34 + gAvrInt_SPM_READY, // 35 + +}; + +#endif + +#if !defined(_INTERRUPT_NAMES_DEFINED_) + #warning No interrupt string defs for this cpu +#endif \ No newline at end of file diff --git a/test/ardmake/hardware/bootloaders/stk500v2/command.h b/test/ardmake/hardware/bootloaders/stk500v2/command.h new file mode 100644 index 0000000..03b1b38 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/stk500v2/command.h @@ -0,0 +1,114 @@ +//**** ATMEL AVR - A P P L I C A T I O N N O T E ************************ +//* +//* Title: AVR068 - STK500 Communication Protocol +//* Filename: command.h +//* Version: 1.0 +//* Last updated: 31.01.2005 +//* +//* Support E-mail: avr@atmel.com +//* +//************************************************************************** + +// *****************[ STK message constants ]*************************** + +#define MESSAGE_START 0x1B //= ESC = 27 decimal +#define TOKEN 0x0E + +// *****************[ STK general command constants ]************************** + +#define CMD_SIGN_ON 0x01 +#define CMD_SET_PARAMETER 0x02 +#define CMD_GET_PARAMETER 0x03 +#define CMD_SET_DEVICE_PARAMETERS 0x04 +#define CMD_OSCCAL 0x05 +#define CMD_LOAD_ADDRESS 0x06 +#define CMD_FIRMWARE_UPGRADE 0x07 + + +// *****************[ STK ISP command constants ]****************************** + +#define CMD_ENTER_PROGMODE_ISP 0x10 +#define CMD_LEAVE_PROGMODE_ISP 0x11 +#define CMD_CHIP_ERASE_ISP 0x12 +#define CMD_PROGRAM_FLASH_ISP 0x13 +#define CMD_READ_FLASH_ISP 0x14 +#define CMD_PROGRAM_EEPROM_ISP 0x15 +#define CMD_READ_EEPROM_ISP 0x16 +#define CMD_PROGRAM_FUSE_ISP 0x17 +#define CMD_READ_FUSE_ISP 0x18 +#define CMD_PROGRAM_LOCK_ISP 0x19 +#define CMD_READ_LOCK_ISP 0x1A +#define CMD_READ_SIGNATURE_ISP 0x1B +#define CMD_READ_OSCCAL_ISP 0x1C +#define CMD_SPI_MULTI 0x1D + +// *****************[ STK PP command constants ]******************************* + +#define CMD_ENTER_PROGMODE_PP 0x20 +#define CMD_LEAVE_PROGMODE_PP 0x21 +#define CMD_CHIP_ERASE_PP 0x22 +#define CMD_PROGRAM_FLASH_PP 0x23 +#define CMD_READ_FLASH_PP 0x24 +#define CMD_PROGRAM_EEPROM_PP 0x25 +#define CMD_READ_EEPROM_PP 0x26 +#define CMD_PROGRAM_FUSE_PP 0x27 +#define CMD_READ_FUSE_PP 0x28 +#define CMD_PROGRAM_LOCK_PP 0x29 +#define CMD_READ_LOCK_PP 0x2A +#define CMD_READ_SIGNATURE_PP 0x2B +#define CMD_READ_OSCCAL_PP 0x2C + +#define CMD_SET_CONTROL_STACK 0x2D + +// *****************[ STK HVSP command constants ]***************************** + +#define CMD_ENTER_PROGMODE_HVSP 0x30 +#define CMD_LEAVE_PROGMODE_HVSP 0x31 +#define CMD_CHIP_ERASE_HVSP 0x32 +#define CMD_PROGRAM_FLASH_HVSP ` 0x33 +#define CMD_READ_FLASH_HVSP 0x34 +#define CMD_PROGRAM_EEPROM_HVSP 0x35 +#define CMD_READ_EEPROM_HVSP 0x36 +#define CMD_PROGRAM_FUSE_HVSP 0x37 +#define CMD_READ_FUSE_HVSP 0x38 +#define CMD_PROGRAM_LOCK_HVSP 0x39 +#define CMD_READ_LOCK_HVSP 0x3A +#define CMD_READ_SIGNATURE_HVSP 0x3B +#define CMD_READ_OSCCAL_HVSP 0x3C + +// *****************[ STK status constants ]*************************** + +// Success +#define STATUS_CMD_OK 0x00 + +// Warnings +#define STATUS_CMD_TOUT 0x80 +#define STATUS_RDY_BSY_TOUT 0x81 +#define STATUS_SET_PARAM_MISSING 0x82 + +// Errors +#define STATUS_CMD_FAILED 0xC0 +#define STATUS_CKSUM_ERROR 0xC1 +#define STATUS_CMD_UNKNOWN 0xC9 + +// *****************[ STK parameter constants ]*************************** +#define PARAM_BUILD_NUMBER_LOW 0x80 +#define PARAM_BUILD_NUMBER_HIGH 0x81 +#define PARAM_HW_VER 0x90 +#define PARAM_SW_MAJOR 0x91 +#define PARAM_SW_MINOR 0x92 +#define PARAM_VTARGET 0x94 +#define PARAM_VADJUST 0x95 +#define PARAM_OSC_PSCALE 0x96 +#define PARAM_OSC_CMATCH 0x97 +#define PARAM_SCK_DURATION 0x98 +#define PARAM_TOPCARD_DETECT 0x9A +#define PARAM_STATUS 0x9C +#define PARAM_DATA 0x9D +#define PARAM_RESET_POLARITY 0x9E +#define PARAM_CONTROLLER_INIT 0x9F + +// *****************[ STK answer constants ]*************************** + +#define ANSWER_CKSUM_ERROR 0xB0 + diff --git a/test/ardmake/hardware/bootloaders/stk500v2/stk500boot.c b/test/ardmake/hardware/bootloaders/stk500v2/stk500boot.c new file mode 100644 index 0000000..13dec89 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/stk500v2/stk500boot.c @@ -0,0 +1,1996 @@ +/***************************************************************************** +Title: STK500v2 compatible bootloader + Modified for Wiring board ATMega128-16MHz +Author: Peter Fleury http://jump.to/fleury +File: $Id: stk500boot.c,v 1.11 2006/06/25 12:39:17 peter Exp $ +Compiler: avr-gcc 3.4.5 or 4.1 / avr-libc 1.4.3 +Hardware: All AVRs with bootloader support, tested with ATmega8 +License: GNU General Public License + +Modified: Worapoht Kornkaewwattanakul http://www.avride.com +Date: 17 October 2007 +Update: 1st, 29 Dec 2007 : Enable CMD_SPI_MULTI but ignore unused command by return 0x00 byte response.. +Compiler: WINAVR20060421 +Description: add timeout feature like previous Wiring bootloader + +DESCRIPTION: + This program allows an AVR with bootloader capabilities to + read/write its own Flash/EEprom. To enter Programming mode + an input pin is checked. If this pin is pulled low, programming mode + is entered. If not, normal execution is done from $0000 + "reset" vector in Application area. + Size fits into a 1024 word bootloader section + when compiled with avr-gcc 4.1 + (direct replace on Wiring Board without fuse setting changed) + +USAGE: + - Set AVR MCU type and clock-frequency (F_CPU) in the Makefile. + - Set baud rate below (AVRISP only works with 115200 bps) + - compile/link the bootloader with the supplied Makefile + - program the "Boot Flash section size" (BOOTSZ fuses), + for boot-size 1024 words: program BOOTSZ01 + - enable the BOOT Reset Vector (program BOOTRST) + - Upload the hex file to the AVR using any ISP programmer + - Program Boot Lock Mode 3 (program BootLock 11 and BootLock 12 lock bits) // (leave them) + - Reset your AVR while keeping PROG_PIN pulled low // (for enter bootloader by switch) + - Start AVRISP Programmer (AVRStudio/Tools/Program AVR) + - AVRISP will detect the bootloader + - Program your application FLASH file and optional EEPROM file using AVRISP + +Note: + Erasing the device without flashing, through AVRISP GUI button "Erase Device" + is not implemented, due to AVRStudio limitations. + Flash is always erased before programming. + + AVRdude: + Please uncomment #define REMOVE_CMD_SPI_MULTI when using AVRdude. + Comment #define REMOVE_PROGRAM_LOCK_BIT_SUPPORT to reduce code size + Read Fuse Bits and Read/Write Lock Bits is not supported + +NOTES: + Based on Atmel Application Note AVR109 - Self-programming + Based on Atmel Application Note AVR068 - STK500v2 Protocol + +LICENSE: + Copyright (C) 2006 Peter Fleury + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + +*****************************************************************************/ + +//************************************************************************ +//* Edit History +//************************************************************************ +//* Jul 7, 2010 = Mark Sproul msproul@skycharoit.com +//* Jul 7, 2010 Working on mega2560. No Auto-restart +//* Jul 7, 2010 Switched to 8K bytes (4K words) so that we have room for the monitor +//* Jul 8, 2010 Found older version of source that had auto restart, put that code back in +//* Jul 8, 2010 Adding monitor code +//* Jul 11, 2010 Added blinking LED while waiting for download to start +//* Jul 11, 2010 Added EEPROM test +//* Jul 29, 2010 Added recchar_timeout for timing out on bootloading +//* Aug 23, 2010 Added support for atmega2561 +//* Aug 26, 2010 Removed support for BOOT_BY_SWITCH +//************************************************************************ + + + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "command.h" + + +#if defined(_MEGA_BOARD_) || defined(_BOARD_AMBER128_) || defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) || defined(__AVR_ATmega2561__) + #define ENABLE_MONITOR + static void RunMonitor(void); +#endif + +//#define _DEBUG_SERIAL_ +//#define _DEBUG_WITH_LEDS_ + + +/* + * Uncomment the following lines to save code space + */ +//#define REMOVE_PROGRAM_LOCK_BIT_SUPPORT // disable program lock bits +//#define REMOVE_BOOTLOADER_LED // no LED to show active bootloader +//#define REMOVE_CMD_SPI_MULTI // disable processing of SPI_MULTI commands, Remark this line for AVRDUDE +// + + + +//************************************************************************ +//* LED on pin "PROGLED_PIN" on port "PROGLED_PORT" +//* indicates that bootloader is active +//* PG2 -> LED on Wiring board +//************************************************************************ +#define BLINK_LED_WHILE_WAITING + +#ifdef _MEGA_BOARD_ + #define PROGLED_PORT PORTB + #define PROGLED_DDR DDRB + #define PROGLED_PIN PINB7 +#elif defined( _BOARD_AMBER128_ ) + //* this is for the amber 128 http://www.soc-robotics.com/ + //* onbarod led is PORTE4 + #define PROGLED_PORT PORTD + #define PROGLED_DDR DDRD + #define PROGLED_PIN PINE7 +#elif defined( _CEREBOTPLUS_BOARD_ ) + //* this is for the Cerebot 2560 board + //* onbarod leds are on PORTE4-7 + #define PROGLED_PORT PORTE + #define PROGLED_DDR DDRE + #define PROGLED_PIN PINE7 +#elif defined( _PENGUINO_ ) + //* this is for the Penguino + //* onbarod led is PORTE4 + #define PROGLED_PORT PORTC + #define PROGLED_DDR DDRC + #define PROGLED_PIN PINC6 +#elif defined( _ANDROID_2561_ ) || defined( __AVR_ATmega2561__ ) + //* this is for the Boston Android 2561 + //* onbarod led is PORTE4 + #define PROGLED_PORT PORTA + #define PROGLED_DDR DDRA + #define PROGLED_PIN PINA3 +#else + #define PROGLED_PORT PORTG + #define PROGLED_DDR DDRG + #define PROGLED_PIN PING2 +#endif + + + +/* + * define CPU frequency in Mhz here if not defined in Makefile + */ +#ifndef F_CPU + #define F_CPU 16000000UL +#endif + +/* + * UART Baudrate, AVRStudio AVRISP only accepts 115200 bps + */ + +#ifndef BAUDRATE + #define BAUDRATE 115200 +#endif + +/* + * Enable (1) or disable (0) USART double speed operation + */ +#ifndef UART_BAUDRATE_DOUBLE_SPEED + #if defined (__AVR_ATmega32__) + #define UART_BAUDRATE_DOUBLE_SPEED 0 + #else + #define UART_BAUDRATE_DOUBLE_SPEED 1 + #endif +#endif + +/* + * HW and SW version, reported to AVRISP, must match version of AVRStudio + */ +#define CONFIG_PARAM_BUILD_NUMBER_LOW 0 +#define CONFIG_PARAM_BUILD_NUMBER_HIGH 0 +#define CONFIG_PARAM_HW_VER 0x0F +#define CONFIG_PARAM_SW_MAJOR 2 +#define CONFIG_PARAM_SW_MINOR 0x0A + +/* + * Calculate the address where the bootloader starts from FLASHEND and BOOTSIZE + * (adjust BOOTSIZE below and BOOTLOADER_ADDRESS in Makefile if you want to change the size of the bootloader) + */ +//#define BOOTSIZE 1024 +#if FLASHEND > 0x0F000 + #define BOOTSIZE 8192 +#else + #define BOOTSIZE 2048 +#endif + +#define APP_END (FLASHEND -(2*BOOTSIZE) + 1) + +/* + * Signature bytes are not available in avr-gcc io_xxx.h + */ +#if defined (__AVR_ATmega8__) + #define SIGNATURE_BYTES 0x1E9307 +#elif defined (__AVR_ATmega16__) + #define SIGNATURE_BYTES 0x1E9403 +#elif defined (__AVR_ATmega32__) + #define SIGNATURE_BYTES 0x1E9502 +#elif defined (__AVR_ATmega8515__) + #define SIGNATURE_BYTES 0x1E9306 +#elif defined (__AVR_ATmega8535__) + #define SIGNATURE_BYTES 0x1E9308 +#elif defined (__AVR_ATmega162__) + #define SIGNATURE_BYTES 0x1E9404 +#elif defined (__AVR_ATmega128__) + #define SIGNATURE_BYTES 0x1E9702 +#elif defined (__AVR_ATmega1280__) + #define SIGNATURE_BYTES 0x1E9703 +#elif defined (__AVR_ATmega2560__) + #define SIGNATURE_BYTES 0x1E9801 +#elif defined (__AVR_ATmega2561__) + #define SIGNATURE_BYTES 0x1e9802 +#else + #error "no signature definition for MCU available" +#endif + + +#if defined(__AVR_ATmega8__) || defined(__AVR_ATmega16__) || defined(__AVR_ATmega32__) \ + || defined(__AVR_ATmega8515__) || defined(__AVR_ATmega8535__) + /* ATMega8 with one USART */ + #define UART_BAUD_RATE_LOW UBRRL + #define UART_STATUS_REG UCSRA + #define UART_CONTROL_REG UCSRB + #define UART_ENABLE_TRANSMITTER TXEN + #define UART_ENABLE_RECEIVER RXEN + #define UART_TRANSMIT_COMPLETE TXC + #define UART_RECEIVE_COMPLETE RXC + #define UART_DATA_REG UDR + #define UART_DOUBLE_SPEED U2X + +#elif defined(__AVR_ATmega64__) || defined(__AVR_ATmega128__) || defined(__AVR_ATmega162__) \ + || defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) || defined(__AVR_ATmega2561__) + /* ATMega with two USART, use UART0 */ + #define UART_BAUD_RATE_LOW UBRR0L + #define UART_STATUS_REG UCSR0A + #define UART_CONTROL_REG UCSR0B + #define UART_ENABLE_TRANSMITTER TXEN0 + #define UART_ENABLE_RECEIVER RXEN0 + #define UART_TRANSMIT_COMPLETE TXC0 + #define UART_RECEIVE_COMPLETE RXC0 + #define UART_DATA_REG UDR0 + #define UART_DOUBLE_SPEED U2X0 +#else + #error "no UART definition for MCU available" +#endif + + + +/* + * Macro to calculate UBBR from XTAL and baudrate + */ +#if defined(__AVR_ATmega32__) && UART_BAUDRATE_DOUBLE_SPEED + #define UART_BAUD_SELECT(baudRate,xtalCpu) ((xtalCpu / 4 / baudRate - 1) / 2) +#elif defined(__AVR_ATmega32__) + #define UART_BAUD_SELECT(baudRate,xtalCpu) ((xtalCpu / 8 / baudRate - 1) / 2) +#elif UART_BAUDRATE_DOUBLE_SPEED + #define UART_BAUD_SELECT(baudRate,xtalCpu) (((float)(xtalCpu))/(((float)(baudRate))*8.0)-1.0+0.5) +#else + #define UART_BAUD_SELECT(baudRate,xtalCpu) (((float)(xtalCpu))/(((float)(baudRate))*16.0)-1.0+0.5) +#endif + + +/* + * States used in the receive state machine + */ +#define ST_START 0 +#define ST_GET_SEQ_NUM 1 +#define ST_MSG_SIZE_1 2 +#define ST_MSG_SIZE_2 3 +#define ST_GET_TOKEN 4 +#define ST_GET_DATA 5 +#define ST_GET_CHECK 6 +#define ST_PROCESS 7 + +/* + * use 16bit address variable for ATmegas with <= 64K flash + */ +#if defined(RAMPZ) + typedef uint32_t address_t; +#else + typedef uint16_t address_t; +#endif + +/* + * function prototypes + */ +static void sendchar(char c); +static unsigned char recchar(void); + +/* + * since this bootloader is not linked against the avr-gcc crt1 functions, + * to reduce the code size, we need to provide our own initialization + */ +void __jumpMain (void) __attribute__ ((naked)) __attribute__ ((section (".init9"))); +#include + +//#define SPH_REG 0x3E +//#define SPL_REG 0x3D + +//***************************************************************************** +void __jumpMain(void) +{ +//* July 17, 2010 Added stack pointer initialzation +//* the first line did not do the job on the ATmega128 + + asm volatile ( ".set __stack, %0" :: "i" (RAMEND) ); + +// ldi r16,high(RAMEND) +// out SPH,r16 ; Set stack pointer to top of RAM + +// asm volatile ( "ldi 16, 0x10"); + asm volatile ( "ldi 16, %0" :: "i" (RAMEND >> 8) ); +// asm volatile ( "out 0x3E,16"); +// asm volatile ( "out %0,16" :: "i" (SPH_REG) ); + asm volatile ( "out %0,16" :: "i" (AVR_STACK_POINTER_HI_ADDR) ); + +// asm volatile ( "ldi 16, 0x00"); + asm volatile ( "ldi 16, %0" :: "i" (RAMEND & 0x0ff) ); +// asm volatile ( "out 0x3d,16"); +// asm volatile ( "out %0,16" :: "i" (SPL_REG) ); + asm volatile ( "out %0,16" :: "i" (AVR_STACK_POINTER_LO_ADDR) ); + + + + asm volatile ( "clr __zero_reg__" ); // GCC depends on register r1 set to 0 + asm volatile ( "out %0, __zero_reg__" :: "I" (_SFR_IO_ADDR(SREG)) ); // set SREG to 0 +// asm volatile ( "rjmp main"); // jump to main() + asm volatile ( "jmp main"); // jump to main() +} + + +//***************************************************************************** +void delay_ms(unsigned int timedelay) +{ + unsigned int i; + for (i=0;i> 1) +//***************************************************************************** +static unsigned char recchar_timeout(void) +{ +uint32_t count = 0; + + while (!(UART_STATUS_REG & (1 << UART_RECEIVE_COMPLETE))) + { + // wait for data + count++; + if (count > MAX_TIME_COUNT) + { + unsigned int data; + #if (FLASHEND > 0x0FFFF) + data = pgm_read_word_far(0); //* get the first word of the user program + #else + data = pgm_read_word_near(0); //* get the first word of the user program + #endif + if (data != 0xffff) //* make sure its valid before jumping to it. + { + asm volatile( + "clr r30 \n\t" + "clr r31 \n\t" + "ijmp \n\t" + ); + } + count = 0; + } + } + return UART_DATA_REG; +} + + + +//***************************************************************************** +int main(void) +{ + address_t address = 0; + address_t eraseAddress = 0; + unsigned char msgParseState; + unsigned int ii = 0; + unsigned char checksum = 0; + unsigned char seqNum = 0; + unsigned int msgLength = 0; + unsigned char msgBuffer[285]; + unsigned char c, *p; + unsigned char isLeave = 0; + + unsigned long boot_timeout; + unsigned long boot_timer; + unsigned int boot_state; +#ifdef ENABLE_MONITOR + unsigned int exPointCntr = 0; +#endif + + + boot_timer = 0; + boot_state = 0; + +#ifdef BLINK_LED_WHILE_WAITING + boot_timeout = 20000; //* should be about 1 second +// boot_timeout = 170000; +#else + boot_timeout = 3500000; // 7 seconds , approx 2us per step when optimize "s" +#endif + /* + * Branch to bootloader or application code ? + */ + +#ifndef REMOVE_BOOTLOADER_LED + /* PROG_PIN pulled low, indicate with LED that bootloader is active */ + PROGLED_DDR |= (1< boot_timeout) + { + boot_state = 1; // (after ++ -> boot_state=2 bootloader timeout, jump to main 0x00000 ) + } + #ifdef BLINK_LED_WHILE_WAITING + if ((boot_timer % 7000) == 0) + { + //* toggle the LED + PROGLED_PORT ^= (1<>16) & 0x000000FF; + else if ( signatureIndex == 1 ) + answerByte = (SIGNATURE_BYTES >> 8) & 0x000000FF; + else + answerByte = SIGNATURE_BYTES & 0x000000FF; + } + else if ( msgBuffer[4] & 0x50 ) + { + answerByte = 0; //read fuse/lock bits not implemented, return dummy value + } + else + { + answerByte = 0; // for all others command are not implemented, return dummy value for AVRDUDE happy + // flag = 1; // Remark this line for AVRDUDE + } + if ( !flag ) + { + msgLength = 7; + msgBuffer[1] = STATUS_CMD_OK; + msgBuffer[2] = 0; + msgBuffer[3] = msgBuffer[4]; + msgBuffer[4] = 0; + msgBuffer[5] = answerByte; + msgBuffer[6] = STATUS_CMD_OK; + } + } + break; + #endif + case CMD_SIGN_ON: + msgLength = 11; + msgBuffer[1] = STATUS_CMD_OK; + msgBuffer[2] = 8; + msgBuffer[3] = 'A'; + msgBuffer[4] = 'V'; + msgBuffer[5] = 'R'; + msgBuffer[6] = 'I'; + msgBuffer[7] = 'S'; + msgBuffer[8] = 'P'; + msgBuffer[9] = '_'; + msgBuffer[10] = '2'; + break; + + case CMD_GET_PARAMETER: + { + unsigned char value; + + switch(msgBuffer[1]) + { + case PARAM_BUILD_NUMBER_LOW: + value = CONFIG_PARAM_BUILD_NUMBER_LOW; + break; + case PARAM_BUILD_NUMBER_HIGH: + value = CONFIG_PARAM_BUILD_NUMBER_HIGH; + break; + case PARAM_HW_VER: + value = CONFIG_PARAM_HW_VER; + break; + case PARAM_SW_MAJOR: + value = CONFIG_PARAM_SW_MAJOR; + break; + case PARAM_SW_MINOR: + value = CONFIG_PARAM_SW_MINOR; + break; + default: + value = 0; + break; + } + msgLength = 3; + msgBuffer[1] = STATUS_CMD_OK; + msgBuffer[2] = value; + } + break; + + case CMD_LEAVE_PROGMODE_ISP: + isLeave = 1; + //* fall thru + + case CMD_SET_PARAMETER: + case CMD_ENTER_PROGMODE_ISP: + msgLength = 2; + msgBuffer[1] = STATUS_CMD_OK; + break; + + case CMD_READ_SIGNATURE_ISP: + { + unsigned char signatureIndex = msgBuffer[4]; + unsigned char signature; + + if ( signatureIndex == 0 ) + signature = (SIGNATURE_BYTES >>16) & 0x000000FF; + else if ( signatureIndex == 1 ) + signature = (SIGNATURE_BYTES >> 8) & 0x000000FF; + else + signature = SIGNATURE_BYTES & 0x000000FF; + + msgLength = 4; + msgBuffer[1] = STATUS_CMD_OK; + msgBuffer[2] = signature; + msgBuffer[3] = STATUS_CMD_OK; + } + break; + + case CMD_READ_LOCK_ISP: + msgLength = 4; + msgBuffer[1] = STATUS_CMD_OK; + msgBuffer[2] = boot_lock_fuse_bits_get( GET_LOCK_BITS ); + msgBuffer[3] = STATUS_CMD_OK; + break; + + case CMD_READ_FUSE_ISP: + { + unsigned char fuseBits; + + if ( msgBuffer[2] == 0x50 ) + { + if ( msgBuffer[3] == 0x08 ) + fuseBits = boot_lock_fuse_bits_get( GET_EXTENDED_FUSE_BITS ); + else + fuseBits = boot_lock_fuse_bits_get( GET_LOW_FUSE_BITS ); + } + else + { + fuseBits = boot_lock_fuse_bits_get( GET_HIGH_FUSE_BITS ); + } + msgLength = 4; + msgBuffer[1] = STATUS_CMD_OK; + msgBuffer[2] = fuseBits; + msgBuffer[3] = STATUS_CMD_OK; + } + break; + + #ifndef REMOVE_PROGRAM_LOCK_BIT_SUPPORT + case CMD_PROGRAM_LOCK_ISP: + { + unsigned char lockBits = msgBuffer[4]; + + lockBits = (~lockBits) & 0x3C; // mask BLBxx bits + boot_lock_bits_set(lockBits); // and program it + boot_spm_busy_wait(); + + msgLength = 3; + msgBuffer[1] = STATUS_CMD_OK; + msgBuffer[2] = STATUS_CMD_OK; + } + break; + #endif + case CMD_CHIP_ERASE_ISP: + eraseAddress = 0; + msgLength = 2; + msgBuffer[1] = STATUS_CMD_OK; + break; + + case CMD_LOAD_ADDRESS: + #if defined(RAMPZ) + address = ( ((address_t)(msgBuffer[1])<<24)|((address_t)(msgBuffer[2])<<16)|((address_t)(msgBuffer[3])<<8)|(msgBuffer[4]) )<<1; + #else + address = ( ((msgBuffer[3])<<8)|(msgBuffer[4]) )<<1; //convert word to byte address + #endif + msgLength = 2; + msgBuffer[1] = STATUS_CMD_OK; + break; + + case CMD_PROGRAM_FLASH_ISP: + case CMD_PROGRAM_EEPROM_ISP: + { + unsigned int size = ((msgBuffer[1])<<8) | msgBuffer[2]; + unsigned char *p = msgBuffer+10; + unsigned int data; + unsigned char highByte, lowByte; + address_t tempaddress = address; + + + if ( msgBuffer[0] == CMD_PROGRAM_FLASH_ISP ) + { + // erase only main section (bootloader protection) + if (eraseAddress < APP_END ) + { + boot_page_erase(eraseAddress); // Perform page erase + boot_spm_busy_wait(); // Wait until the memory is erased. + eraseAddress += SPM_PAGESIZE; // point to next page to be erase + } + + /* Write FLASH */ + do { + lowByte = *p++; + highByte = *p++; + + data = (highByte << 8) | lowByte; + boot_page_fill(address,data); + + address = address + 2; // Select next word in memory + size -= 2; // Reduce number of bytes to write by two + } while (size); // Loop until all bytes written + + boot_page_write(tempaddress); + boot_spm_busy_wait(); + boot_rww_enable(); // Re-enable the RWW section + } + else + { + #if (!defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__) && !defined(__AVR_ATmega2561__)) + /* write EEPROM */ + do { + EEARL = address; // Setup EEPROM address + EEARH = (address >> 8); + address++; // Select next EEPROM byte + + EEDR = *p++; // get byte from buffer + EECR |= (1<> 8); //MSB + address += 2; // Select next word in memory + size -= 2; + }while (size); + } + else + { + /* Read EEPROM */ + do { + EEARL = address; // Setup EEPROM address + EEARH = ((address >> 8)); + address++; // Select next EEPROM byte + EECR |= (1<>8)&0xFF); + sendchar(c); + checksum ^= c; + + c = msgLength&0x00FF; + sendchar(c); + checksum ^= c; + + sendchar(TOKEN); + checksum ^= TOKEN; + + p = msgBuffer; + while ( msgLength ) + { + c = *p++; + sendchar(c); + checksum ^=c; + msgLength--; + } + sendchar(checksum); + seqNum++; + + #ifndef REMOVE_BOOTLOADER_LED + //* toggle the LED + PROGLED_PORT ^= (1< + + +base address = f000 +avrdude: Device signature = 0x1e9703 +avrdude: safemode: lfuse reads as FF +avrdude: safemode: hfuse reads as D8 +avrdude: safemode: efuse reads as F5 +avrdude> +*/ + +//************************************************************************ +#ifdef ENABLE_MONITOR +#include + +unsigned long gRamIndex; +unsigned long gFlashIndex; +unsigned long gEepromIndex; + + +#define true 1 +#define false 0 + +#if defined(__AVR_ATmega128__) + #define kCPU_NAME "ATmega128" +#elif defined(__AVR_ATmega1280__) + #define kCPU_NAME "ATmega1280" +#elif defined(__AVR_ATmega1281__) + #define kCPU_NAME "ATmega1281" +#elif defined(__AVR_ATmega2560__) + #define kCPU_NAME "ATmega2560" +#elif defined(__AVR_ATmega2561__) + #define kCPU_NAME "ATmega2561" +#endif + +#ifdef _VECTORS_SIZE + #define kInterruptVectorCount (_VECTORS_SIZE / 4) +#else + #define kInterruptVectorCount 23 +#endif + + +void PrintDecInt(int theNumber, int digitCnt); + +#ifdef kCPU_NAME + prog_char gTextMsg_CPU_Name[] PROGMEM = kCPU_NAME; +#else + prog_char gTextMsg_CPU_Name[] PROGMEM = "UNKNOWN"; +#endif + + prog_char gTextMsg_Explorer[] PROGMEM = "Arduino explorer stk500V2 by MLS"; + prog_char gTextMsg_Prompt[] PROGMEM = "Bootloader>"; + prog_char gTextMsg_HUH[] PROGMEM = "Huh?"; + prog_char gTextMsg_COMPILED_ON[] PROGMEM = "Compiled on = "; + prog_char gTextMsg_CPU_Type[] PROGMEM = "CPU Type = "; + prog_char gTextMsg_AVR_ARCH[] PROGMEM = "__AVR_ARCH__ = "; + prog_char gTextMsg_AVR_LIBC[] PROGMEM = "AVR LibC Ver = "; + prog_char gTextMsg_GCC_VERSION[] PROGMEM = "GCC Version = "; + prog_char gTextMsg_CPU_SIGNATURE[] PROGMEM = "CPU signature= "; + prog_char gTextMsg_FUSE_BYTE_LOW[] PROGMEM = "Low fuse = "; + prog_char gTextMsg_FUSE_BYTE_HIGH[] PROGMEM = "High fuse = "; + prog_char gTextMsg_FUSE_BYTE_EXT[] PROGMEM = "Ext fuse = "; + prog_char gTextMsg_FUSE_BYTE_LOCK[] PROGMEM = "Lock fuse = "; + prog_char gTextMsg_GCC_DATE_STR[] PROGMEM = __DATE__; + prog_char gTextMsg_AVR_LIBC_VER_STR[] PROGMEM = __AVR_LIBC_VERSION_STRING__; + prog_char gTextMsg_GCC_VERSION_STR[] PROGMEM = __VERSION__; + prog_char gTextMsg_VECTOR_HEADER[] PROGMEM = "V# ADDR op code instruction addr Interrupt"; + prog_char gTextMsg_noVector[] PROGMEM = "no vector"; + prog_char gTextMsg_rjmp[] PROGMEM = "rjmp "; + prog_char gTextMsg_jmp[] PROGMEM = "jmp "; + prog_char gTextMsg_WHAT_PORT[] PROGMEM = "What port:"; + prog_char gTextMsg_PortNotSupported[] PROGMEM = "Port not supported"; + prog_char gTextMsg_MustBeLetter[] PROGMEM = "Must be a letter"; + prog_char gTextMsg_SPACE[] PROGMEM = " "; + prog_char gTextMsg_WriteToEEprom[] PROGMEM = "Writting EE"; + prog_char gTextMsg_ReadingEEprom[] PROGMEM = "Reading EE"; + prog_char gTextMsg_EEPROMerrorCnt[] PROGMEM = "eeprom error count="; + prog_char gTextMsg_PORT[] PROGMEM = "PORT"; + + +//************************************************************************ +//* Help messages + prog_char gTextMsg_HELP_MSG_0[] PROGMEM = "0=Zero address ctrs"; + prog_char gTextMsg_HELP_MSG_QM[] PROGMEM = "?=CPU stats"; + prog_char gTextMsg_HELP_MSG_AT[] PROGMEM = "@=EEPROM test"; + prog_char gTextMsg_HELP_MSG_B[] PROGMEM = "B=Blink LED"; + prog_char gTextMsg_HELP_MSG_E[] PROGMEM = "E=Dump EEPROM"; + prog_char gTextMsg_HELP_MSG_F[] PROGMEM = "F=Dump FLASH"; + prog_char gTextMsg_HELP_MSG_H[] PROGMEM = "H=Help"; + prog_char gTextMsg_HELP_MSG_L[] PROGMEM = "L=List I/O Ports"; + prog_char gTextMsg_HELP_MSG_Q[] PROGMEM = "Q=Quit & jump to user pgm"; + prog_char gTextMsg_HELP_MSG_R[] PROGMEM = "R=Dump RAM"; + prog_char gTextMsg_HELP_MSG_V[] PROGMEM = "V=show interrupt Vectors"; + prog_char gTextMsg_HELP_MSG_Y[] PROGMEM = "Y=Port blink"; + + prog_char gTextMsg_END[] PROGMEM = "*"; + + +//************************************************************************ +void PrintFromPROGMEM(void *dataPtr, unsigned char offset) +{ +uint8_t ii; +char theChar; + + ii = offset; + theChar = 1; + + while (theChar != 0) + { + theChar = pgm_read_byte_far((uint32_t)dataPtr + ii); + if (theChar != 0) + { + sendchar(theChar); + } + ii++; + } +} + +//************************************************************************ +void PrintNewLine(void) +{ + sendchar(0x0d); + sendchar(0x0a); +} + + +//************************************************************************ +void PrintFromPROGMEMln(void *dataPtr, unsigned char offset) +{ + PrintFromPROGMEM(dataPtr, offset); + + PrintNewLine(); +} + + +//************************************************************************ +void PrintString(char *textString) +{ +char theChar; +int ii; + + theChar = 1; + ii = 0; + while (theChar != 0) + { + theChar = textString[ii]; + if (theChar != 0) + { + sendchar(theChar); + } + ii++; + } +} + +//************************************************************************ +void PrintHexByte(unsigned char theByte) +{ +char theChar; + + theChar = 0x30 + ((theByte >> 4) & 0x0f); + if (theChar > 0x39) + { + theChar += 7; + } + sendchar(theChar ); + + theChar = 0x30 + (theByte & 0x0f); + if (theChar > 0x39) + { + theChar += 7; + } + sendchar(theChar ); +} + +//************************************************************************ +void PrintDecInt(int theNumber, int digitCnt) +{ +int theChar; +int myNumber; + + myNumber = theNumber; + + if ((myNumber > 100) || (digitCnt >= 3)) + { + theChar = 0x30 + myNumber / 100; + sendchar(theChar ); + } + + if ((myNumber > 10) || (digitCnt >= 2)) + { + theChar = 0x30 + ((myNumber % 100) / 10 ); + sendchar(theChar ); + } + theChar = 0x30 + (myNumber % 10); + sendchar(theChar ); +} + + + + +//************************************************************************ +static void PrintCPUstats(void) +{ +unsigned char fuseByte; + + PrintFromPROGMEMln(gTextMsg_Explorer, 0); + + PrintFromPROGMEM(gTextMsg_COMPILED_ON, 0); + PrintFromPROGMEMln(gTextMsg_GCC_DATE_STR, 0); + + PrintFromPROGMEM(gTextMsg_CPU_Type, 0); + PrintFromPROGMEMln(gTextMsg_CPU_Name, 0); + + PrintFromPROGMEM(gTextMsg_AVR_ARCH, 0); + PrintDecInt(__AVR_ARCH__, 1); + PrintNewLine(); + + PrintFromPROGMEM(gTextMsg_GCC_VERSION, 0); + PrintFromPROGMEMln(gTextMsg_GCC_VERSION_STR, 0); + + //* these can be found in avr/version.h + PrintFromPROGMEM(gTextMsg_AVR_LIBC, 0); + PrintFromPROGMEMln(gTextMsg_AVR_LIBC_VER_STR, 0); + +#if defined(SIGNATURE_0) + PrintFromPROGMEM(gTextMsg_CPU_SIGNATURE, 0); + //* these can be found in avr/iomxxx.h + PrintHexByte(SIGNATURE_0); + PrintHexByte(SIGNATURE_1); + PrintHexByte(SIGNATURE_2); + PrintNewLine(); +#endif + + +#if defined(GET_LOW_FUSE_BITS) + //* fuse settings + PrintFromPROGMEM(gTextMsg_FUSE_BYTE_LOW, 0); + fuseByte = boot_lock_fuse_bits_get(GET_LOW_FUSE_BITS); + PrintHexByte(fuseByte); + PrintNewLine(); + + PrintFromPROGMEM(gTextMsg_FUSE_BYTE_HIGH, 0); + fuseByte = boot_lock_fuse_bits_get(GET_HIGH_FUSE_BITS); + PrintHexByte(fuseByte); + PrintNewLine(); + + PrintFromPROGMEM(gTextMsg_FUSE_BYTE_EXT, 0); + fuseByte = boot_lock_fuse_bits_get(GET_EXTENDED_FUSE_BITS); + PrintHexByte(fuseByte); + PrintNewLine(); + + PrintFromPROGMEM(gTextMsg_FUSE_BYTE_LOCK, 0); + fuseByte = boot_lock_fuse_bits_get(GET_LOCK_BITS); + PrintHexByte(fuseByte); + PrintNewLine(); + +#endif + +} + +#ifndef sbi + #define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit)) +#endif + +//************************************************************************ +int analogRead(uint8_t pin) +{ +uint8_t low, high; + + // set the analog reference (high two bits of ADMUX) and select the + // channel (low 4 bits). this also sets ADLAR (left-adjust result) + // to 0 (the default). +// ADMUX = (analog_reference << 6) | (pin & 0x07); + ADMUX = (1 << 6) | (pin & 0x07); + +#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) + // the MUX5 bit of ADCSRB selects whether we're reading from channels + // 0 to 7 (MUX5 low) or 8 to 15 (MUX5 high). + ADCSRB = (ADCSRB & ~(1 << MUX5)) | (((pin >> 3) & 0x01) << MUX5); +#endif + + // without a delay, we seem to read from the wrong channel + //delay(1); + + // start the conversion + sbi(ADCSRA, ADSC); + + // ADSC is cleared when the conversion finishes + while (bit_is_set(ADCSRA, ADSC)); + + // we have to read ADCL first; doing so locks both ADCL + // and ADCH until ADCH is read. reading ADCL second would + // cause the results of each conversion to be discarded, + // as ADCL and ADCH would be locked when it completed. + low = ADCL; + high = ADCH; + + // combine the two bytes + return (high << 8) | low; +} + +//************************************************************************ +static void BlinkLED(void) +{ + PROGLED_DDR |= (1< 0) + { + if (myAddressPointer > 0x10000) + { + PrintHexByte((myAddressPointer >> 16) & 0x00ff); + } + PrintHexByte((myAddressPointer >> 8) & 0x00ff); + PrintHexByte(myAddressPointer & 0x00ff); + sendchar(0x20); + sendchar('-'); + sendchar(0x20); + + asciiDump[0] = 0; + for (ii=0; ii<16; ii++) + { + switch(dumpWhat) + { + case kDUMP_FLASH: + theValue = pgm_read_byte_far(myAddressPointer); + break; + + case kDUMP_EEPROM: + theValue = eeprom_read_byte((void *)myAddressPointer); + break; + + case kDUMP_RAM: + theValue = ramPtr[myAddressPointer]; + break; + + } + PrintHexByte(theValue); + sendchar(0x20); + if ((theValue >= 0x20) && (theValue < 0x7f)) + { + asciiDump[ii % 16] = theValue; + } + else + { + asciiDump[ii % 16] = '.'; + } + + myAddressPointer++; + } + asciiDump[16] = 0; + PrintString(asciiDump); + PrintNewLine(); + + numRows--; + } +} + + + +//************************************************************************ +//* returns amount of extended memory +static void EEPROMtest(void) +{ +int ii; +char theChar; +char theEEPROMchar; +int errorCount; + + PrintFromPROGMEMln(gTextMsg_WriteToEEprom, 0); + PrintNewLine(); + ii = 0; + while (((theChar = pgm_read_byte_far(gTextMsg_Explorer + ii)) != '*') && (ii < 512)) + { + eeprom_write_byte((uint8_t *)ii, theChar); + if (theChar == 0) + { + PrintFromPROGMEM(gTextMsg_SPACE, 0); + } + else + { + sendchar(theChar); + } + ii++; + } + + //* no go back through and test + PrintNewLine(); + PrintNewLine(); + PrintFromPROGMEMln(gTextMsg_ReadingEEprom, 0); + PrintNewLine(); + errorCount = 0; + ii = 0; + while (((theChar = pgm_read_byte_far(gTextMsg_Explorer + ii)) != '*') && (ii < 512)) + { + theEEPROMchar = eeprom_read_byte((uint8_t *)ii); + if (theEEPROMchar == 0) + { + PrintFromPROGMEM(gTextMsg_SPACE, 0); + } + else + { + sendchar(theEEPROMchar); + } + if (theEEPROMchar != theChar) + { + errorCount++; + } + ii++; + } + PrintNewLine(); + PrintNewLine(); + PrintFromPROGMEM(gTextMsg_EEPROMerrorCnt, 0); + PrintDecInt(errorCount, 1); + PrintNewLine(); + PrintNewLine(); + + gEepromIndex = 0; //* set index back to zero for next eeprom dump + +} + + + +#if (FLASHEND > 0x08000) + #include "avrinterruptnames.h" + #ifndef _INTERRUPT_NAMES_DEFINED_ + #warning Interrupt vectors not defined + #endif +#endif + +//************************************************************************ +static void VectorDisplay(void) +{ +unsigned long byte1; +unsigned long byte2; +unsigned long byte3; +unsigned long byte4; +unsigned long word1; +unsigned long word2; +int vectorIndex; +unsigned long myMemoryPtr; +unsigned long wordMemoryAddress; +unsigned long realitiveAddr; +unsigned long myFullAddress; +unsigned long absoluteAddr; +#if defined(_INTERRUPT_NAMES_DEFINED_) + long stringPointer; +#endif + + myMemoryPtr = 0; + vectorIndex = 0; + PrintFromPROGMEMln(gTextMsg_CPU_Name, 0); + PrintFromPROGMEMln(gTextMsg_VECTOR_HEADER, 0); + // V# ADDR op code + // 1 - 0000 = C3 BB 00 00 rjmp 03BB >000776 RESET + while (vectorIndex < kInterruptVectorCount) + { + wordMemoryAddress = myMemoryPtr / 2; + // 01 - 0000 = 12 34 + PrintDecInt(vectorIndex + 1, 2); + sendchar(0x20); + sendchar('-'); + sendchar(0x20); + PrintHexByte((wordMemoryAddress >> 8) & 0x00ff); + PrintHexByte((wordMemoryAddress) & 0x00ff); + sendchar(0x20); + sendchar('='); + sendchar(0x20); + + + //* the AVR is LITTLE ENDIAN, swap the byte order + byte1 = pgm_read_byte_far(myMemoryPtr++); + byte2 = pgm_read_byte_far(myMemoryPtr++); + word1 = (byte2 << 8) + byte1; + + byte3 = pgm_read_byte_far(myMemoryPtr++); + byte4 = pgm_read_byte_far(myMemoryPtr++); + word2 = (byte4 << 8) + byte3; + + + PrintHexByte(byte2); + sendchar(0x20); + PrintHexByte(byte1); + sendchar(0x20); + PrintHexByte(byte4); + sendchar(0x20); + PrintHexByte(byte3); + sendchar(0x20); + + if (word1 == 0xffff) + { + PrintFromPROGMEM(gTextMsg_noVector, 0); + } + else if ((word1 & 0xc000) == 0xc000) + { + //* rjmp instruction + realitiveAddr = word1 & 0x3FFF; + absoluteAddr = wordMemoryAddress + realitiveAddr; //* add the offset to the current address + absoluteAddr = absoluteAddr << 1; //* multiply by 2 for byte address + + PrintFromPROGMEM(gTextMsg_rjmp, 0); + PrintHexByte((realitiveAddr >> 8) & 0x00ff); + PrintHexByte((realitiveAddr) & 0x00ff); + sendchar(0x20); + sendchar('>'); + PrintHexByte((absoluteAddr >> 16) & 0x00ff); + PrintHexByte((absoluteAddr >> 8) & 0x00ff); + PrintHexByte((absoluteAddr) & 0x00ff); + + } + else if ((word1 & 0xfE0E) == 0x940c) + { + //* jmp instruction, this is REALLY complicated, refer to the instruction manual (JMP) + myFullAddress = ((byte1 & 0x01) << 16) + + ((byte1 & 0xf0) << 17) + + ((byte2 & 0x01) << 21) + + word2; + + absoluteAddr = myFullAddress << 1; + + PrintFromPROGMEM(gTextMsg_jmp, 0); + PrintHexByte((myFullAddress >> 16) & 0x00ff); + PrintHexByte((myFullAddress >> 8) & 0x00ff); + PrintHexByte((myFullAddress) & 0x00ff); + sendchar(0x20); + sendchar('>'); + PrintHexByte((absoluteAddr >> 16) & 0x00ff); + PrintHexByte((absoluteAddr >> 8) & 0x00ff); + PrintHexByte((absoluteAddr) & 0x00ff); + } + + #if defined(_INTERRUPT_NAMES_DEFINED_) + sendchar(0x20); + stringPointer = pgm_read_word_far(&(gInterruptNameTable[vectorIndex])); + PrintFromPROGMEM((char *)stringPointer, 0); + #endif + PrintNewLine(); + + vectorIndex++; + } +} + +//************************************************************************ +static void PrintAvailablePort(char thePortLetter) +{ + PrintFromPROGMEM(gTextMsg_PORT, 0); + sendchar(thePortLetter); + PrintNewLine(); +} + +//************************************************************************ +static void ListAvailablePorts(void) +{ + +#ifdef DDRA + PrintAvailablePort('A'); +#endif + +#ifdef DDRB + PrintAvailablePort('B'); +#endif + +#ifdef DDRC + PrintAvailablePort('C'); +#endif + +#ifdef DDRD + PrintAvailablePort('D'); +#endif + +#ifdef DDRE + PrintAvailablePort('E'); +#endif + +#ifdef DDRF + PrintAvailablePort('F'); +#endif + +#ifdef DDRG + PrintAvailablePort('G'); +#endif + +#ifdef DDRH + PrintAvailablePort('H'); +#endif + +#ifdef DDRI + PrintAvailablePort('I'); +#endif + +#ifdef DDRJ + PrintAvailablePort('J'); +#endif + +#ifdef DDRK + PrintAvailablePort('K'); +#endif + +#ifdef DDRL + PrintAvailablePort('L'); +#endif + +} + +//************************************************************************ +static void AVR_PortOutput(void) +{ +char portLetter; +char getCharFlag; + + PrintFromPROGMEM(gTextMsg_WHAT_PORT, 0); + + portLetter = recchar(); + portLetter = portLetter & 0x5f; + sendchar(portLetter); + PrintNewLine(); + + if ((portLetter >= 'A') && (portLetter <= 'Z')) + { + getCharFlag = true; + switch(portLetter) + { + #ifdef DDRA + case 'A': + DDRA = 0xff; + while (!Serial_Available()) + { + PORTA ^= 0xff; + delay_ms(200); + } + PORTA = 0; + break; + #endif + + #ifdef DDRB + case 'B': + DDRB = 0xff; + while (!Serial_Available()) + { + PORTB ^= 0xff; + delay_ms(200); + } + PORTB = 0; + break; + #endif + + #ifdef DDRC + case 'C': + DDRC = 0xff; + while (!Serial_Available()) + { + PORTC ^= 0xff; + delay_ms(200); + } + PORTC = 0; + break; + #endif + + #ifdef DDRD + case 'D': + DDRD = 0xff; + while (!Serial_Available()) + { + PORTD ^= 0xff; + delay_ms(200); + } + PORTD = 0; + break; + #endif + + #ifdef DDRE + case 'E': + DDRE = 0xff; + while (!Serial_Available()) + { + PORTE ^= 0xff; + delay_ms(200); + } + PORTE = 0; + break; + #endif + + #ifdef DDRF + case 'F': + DDRF = 0xff; + while (!Serial_Available()) + { + PORTF ^= 0xff; + delay_ms(200); + } + PORTF = 0; + break; + #endif + + #ifdef DDRG + case 'G': + DDRG = 0xff; + while (!Serial_Available()) + { + PORTG ^= 0xff; + delay_ms(200); + } + PORTG = 0; + break; + #endif + + #ifdef DDRH + case 'H': + DDRH = 0xff; + while (!Serial_Available()) + { + PORTH ^= 0xff; + delay_ms(200); + } + PORTH = 0; + break; + #endif + + #ifdef DDRI + case 'I': + DDRI = 0xff; + while (!Serial_Available()) + { + PORTI ^= 0xff; + delay_ms(200); + } + PORTI = 0; + break; + #endif + + #ifdef DDRJ + case 'J': + DDRJ = 0xff; + while (!Serial_Available()) + { + PORTJ ^= 0xff; + delay_ms(200); + } + PORTJ = 0; + break; + #endif + + #ifdef DDRK + case 'K': + DDRK = 0xff; + while (!Serial_Available()) + { + PORTK ^= 0xff; + delay_ms(200); + } + PORTK = 0; + break; + #endif + + #ifdef DDRL + case 'L': + DDRL = 0xff; + while (!Serial_Available()) + { + PORTL ^= 0xff; + delay_ms(200); + } + PORTL = 0; + break; + #endif + + default: + PrintFromPROGMEMln(gTextMsg_PortNotSupported, 0); + getCharFlag = false; + break; + } + if (getCharFlag) + { + recchar(); + } + } + else + { + PrintFromPROGMEMln(gTextMsg_MustBeLetter, 0); + } +} + + +//******************************************************************* +static void PrintHelp(void) +{ + PrintFromPROGMEMln(gTextMsg_HELP_MSG_0, 0); + PrintFromPROGMEMln(gTextMsg_HELP_MSG_QM, 0); + PrintFromPROGMEMln(gTextMsg_HELP_MSG_AT, 0); + PrintFromPROGMEMln(gTextMsg_HELP_MSG_B, 0); + PrintFromPROGMEMln(gTextMsg_HELP_MSG_E, 0); + PrintFromPROGMEMln(gTextMsg_HELP_MSG_F, 0); + PrintFromPROGMEMln(gTextMsg_HELP_MSG_H, 0); + + PrintFromPROGMEMln(gTextMsg_HELP_MSG_L, 0); + PrintFromPROGMEMln(gTextMsg_HELP_MSG_Q, 0); + PrintFromPROGMEMln(gTextMsg_HELP_MSG_R, 0); + PrintFromPROGMEMln(gTextMsg_HELP_MSG_V, 0); + PrintFromPROGMEMln(gTextMsg_HELP_MSG_Y, 0); +} + +//************************************************************************ +static void RunMonitor(void) +{ +char keepGoing; +unsigned char theChar; +int ii, jj; + + for (ii=0; ii<5; ii++) + { + for (jj=0; jj<25; jj++) + { + sendchar('!'); + } + PrintNewLine(); + } + + gRamIndex = 0; + gFlashIndex = 0; + gEepromIndex = 0; + + PrintFromPROGMEMln(gTextMsg_Explorer, 0); + + keepGoing = 1; + while (keepGoing) + { + PrintFromPROGMEM(gTextMsg_Prompt, 0); + theChar = recchar(); + if (theChar >= 0x60) + { + theChar = theChar & 0x5F; + } + #if defined( _CEREBOTPLUS_BOARD_ ) + if (theChar == 0x5F) + { + + } + else + #endif + if (theChar >= 0x20) + { + sendchar(theChar); + sendchar(0x20); + } + + switch(theChar) + { + case '0': + PrintFromPROGMEMln(gTextMsg_HELP_MSG_0, 2); + gFlashIndex = 0; + gRamIndex = 0; + gEepromIndex = 0; + break; + + case '?': + PrintFromPROGMEMln(gTextMsg_HELP_MSG_QM, 2); + PrintCPUstats(); + break; + + case '@': + PrintFromPROGMEMln(gTextMsg_HELP_MSG_AT, 2); + EEPROMtest(); + break; + + case 'B': + PrintFromPROGMEMln(gTextMsg_HELP_MSG_B, 2); + BlinkLED(); + break; + + case 'E': + PrintFromPROGMEMln(gTextMsg_HELP_MSG_E, 2); + DumpHex(kDUMP_EEPROM, gEepromIndex, 16); + gEepromIndex += 256; + if (gEepromIndex > E2END) + { + gEepromIndex = 0; + } + break; + + case 'F': + PrintFromPROGMEMln(gTextMsg_HELP_MSG_F, 2); + DumpHex(kDUMP_FLASH, gFlashIndex, 16); + gFlashIndex += 256; + break; + + case 'H': + PrintFromPROGMEMln(gTextMsg_HELP_MSG_H, 2); + PrintHelp(); + break; + + case 'L': + PrintFromPROGMEMln(gTextMsg_HELP_MSG_L, 2); + ListAvailablePorts(); + break; + + case 'Q': + PrintFromPROGMEMln(gTextMsg_HELP_MSG_Q, 2); + keepGoing = false; + break; + + case 'R': + PrintFromPROGMEMln(gTextMsg_HELP_MSG_R, 2); + DumpHex(kDUMP_RAM, gRamIndex, 16); + gRamIndex += 256; + break; + + case 'V': + PrintFromPROGMEMln(gTextMsg_HELP_MSG_V, 2); + VectorDisplay(); + break; + + case 'Y': + PrintFromPROGMEMln(gTextMsg_HELP_MSG_Y, 2); + AVR_PortOutput(); + break; + + #if defined( _CEREBOTPLUS_BOARD_ ) + case 0x5F: + //* do nothing + break; + #endif + + default: + PrintFromPROGMEMln(gTextMsg_HUH, 0); + break; + } + } +} + +#endif + diff --git a/test/ardmake/hardware/bootloaders/stk500v2/stk500boot.ppg b/test/ardmake/hardware/bootloaders/stk500v2/stk500boot.ppg new file mode 100644 index 0000000..a8929d7 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/stk500v2/stk500boot.ppg @@ -0,0 +1 @@ + \ No newline at end of file diff --git a/test/ardmake/hardware/bootloaders/stk500v2/stk500boot_v2_mega2560.hex b/test/ardmake/hardware/bootloaders/stk500v2/stk500boot_v2_mega2560.hex new file mode 100644 index 0000000..4f36699 --- /dev/null +++ b/test/ardmake/hardware/bootloaders/stk500v2/stk500boot_v2_mega2560.hex @@ -0,0 +1,513 @@ +:020000023000CC +:10E000000D94F6F20D941FF30D941FF30D941FF36E +:10E010000D941FF30D941FF30D941FF30D941FF334 +:10E020000D941FF30D941FF30D941FF30D941FF324 +:10E030000D941FF30D941FF30D941FF30D941FF314 +:10E040000D941FF30D941FF30D941FF30D941FF304 +:10E050000D941FF30D941FF30D941FF30D941FF3F4 +:10E060000D941FF30D941FF30D941FF30D941FF3E4 +:10E070000D941FF30D941FF30D941FF30D941FF3D4 +:10E080000D941FF30D941FF30D941FF30D941FF3C4 +:10E090000D941FF30D941FF30D941FF30D941FF3B4 +:10E0A0000D941FF30D941FF30D941FF30D941FF3A4 +:10E0B0000D941FF30D941FF30D941FF30D941FF394 +:10E0C0000D941FF30D941FF30D941FF30D941FF384 +:10E0D0000D941FF30D941FF30D941FF30D941FF374 +:10E0E0000D941FF341546D65676132353630004140 +:10E0F000726475696E6F206578706C6F72657220DE +:10E1000073746B3530305632206279204D4C530099 +:10E11000426F6F746C6F616465723E004875683F52 +:10E1200000436F6D70696C6564206F6E20203D2028 +:10E1300000435055205479706520202020203D2038 +:10E14000005F5F4156525F415243485F5F203D2070 +:10E1500000415652204C69624320566572203D2092 +:10E16000004743432056657273696F6E20203D203F +:10E1700000435055207369676E61747572653D2068 +:10E18000004C6F77206675736520202020203D208D +:10E1900000486967682066757365202020203D204F +:10E1A00000457874206675736520202020203D206E +:10E1B000004C6F636B2066757365202020203D2026 +:10E1C00000536570202039203230313000312E3636 +:10E1D0002E3700342E332E33005623202020414486 +:10E1E00044522020206F7020636F6465202020201F +:10E1F00020696E737472756374696F6E20616464F4 +:10E2000072202020496E74657272757074006E6F92 +:10E2100020766563746F7200726A6D702020006AE8 +:10E220006D7020005768617420706F72743A0050EE +:10E230006F7274206E6F7420737570706F72746576 +:10E2400064004D7573742062652061206C65747480 +:10E2500065720020005772697474696E67204545C5 +:10E260000052656164696E6720454500656570729E +:10E270006F6D206572726F7220636F756E743D00F2 +:10E28000504F525400303D5A65726F206164647281 +:10E290006573732063747273003F3D435055207360 +:10E2A0007461747300403D454550524F4D20746574 +:10E2B000737400423D426C696E6B204C45440045CE +:10E2C0003D44756D7020454550524F4D00463D44CC +:10E2D000756D7020464C41534800483D48656C7050 +:10E2E000004C3D4C69737420492F4F20506F72745D +:10E2F0007300513D517569742026206A756D702038 +:10E30000746F20757365722070676D00523D44759F +:10E310006D702052414D00563D73686F7720696ED5 +:10E320007465727275707420566563746F727300D1 +:10E33000593D506F727420626C696E6B002A0052F6 +:10E340004553455400494E543000494E543100491C +:10E350004E543200494E543300494E543400494E15 +:10E36000543500494E543600494E54370050434905 +:10E370004E5430005043494E5431005043494E549E +:10E3800032005744540054494D45523020434F4DBC +:10E3900050410054494D45523020434F4D504200AA +:10E3A00054494D455230204F56460054494D455230 +:10E3B0003120434150540054494D45523120434F80 +:10E3C0004D50410054494D45523120434F4D50422C +:10E3D0000054494D45523120434F4D50430054495C +:10E3E0004D455231204F56460054494D455232203A +:10E3F000434F4D50410054494D45523220434F4DFB +:10E4000050420054494D455232204F56460054491F +:10E410004D45523320434150540054494D455233E9 +:10E4200020434F4D50410054494D45523320434FF6 +:10E430004D50420054494D45523320434F4D5043B7 +:10E440000054494D455233204F56460054494D45DE +:10E45000523420434150540054494D4552342043D6 +:10E460004F4D50410054494D45523420434F4D507B +:10E47000420054494D45523420434F4D50430054BF +:10E48000494D455234204F56460054494D4552356A +:10E4900020434150540054494D45523520434F4D7F +:10E4A00050410054494D45523520434F4D50420094 +:10E4B00054494D45523520434F4D50430054494D2A +:10E4C000455235204F564600555341525430205244 +:10E4D000580055534152543020554452450055532D +:10E4E0004152543020545800555341525431205217 +:10E4F000580055534152543120554452450055530C +:10E5000041525431205458005553415254322052F4 +:10E5100058005553415254322055445245005553EA +:10E5200041525432205458005553415254332052D2 +:10E5300058005553415254332055445245005553C9 +:10E5400041525433205458005350492053544300EF +:10E5500041444300414E414C4F4720434F4D5000F2 +:10E560004545205245414459005457490053504DA8 +:10E57000205245414459002A003FE345E34AE34F16 +:10E58000E354E359E35EE363E368E36DE374E37B41 +:10E59000E382E3E9E3F6E303E4ABE3B7E3C4E3D107 +:10E5A000E3DEE386E393E3A0E348E5C8E4D2E4DEF8 +:10E5B000E454E550E560E50EE41AE427E434E44170 +:10E5C000E4E8E4F2E4FEE469E56DE54CE458E46572 +:10E5D000E472E47FE48AE496E4A3E4B0E4BDE408F2 +:10E5E000E512E51EE528E532E53EE50011241FBEF3 +:10E5F000CFEFD1E2DEBFCDBF01E00CBF12E0A0E063 +:10E60000B2E0EAEDFFEF03E00BBF02C007900D920E +:10E61000A030B107D9F712E0A0E0B2E001C01D922E +:10E62000AC30B107E1F70F94FBF40D94EBFF01E27E +:10E630000EBF0FEF0DBF11241FBE0D94FBF40D9400 +:10E6400000F020E030E040ED57E005C0FA013197DE +:10E65000F1F72F5F3F4F28173907C0F308959C014A +:10E66000442737FD4095542FDA01C901860F911DCB +:10E67000A11DB11DABBFFC018791882369F0809378 +:10E68000C6008091C00086FFFCCF8091C0008064EE +:10E690008093C0006F5FE8CF08958DE08093C6003F +:10E6A0008091C00086FFFCCF8091C0008064809381 +:10E6B000C0008AE08093C6008091C00086FFFCCF36 +:10E6C0008091C00080648093C00008950F942FF360 +:10E6D0000F944DF30895FC019081992359F0909384 +:10E6E000C6008091C00086FFFCCF8091C00080648E +:10E6F0008093C0003196992379F70895282F982F99 +:10E7000092959F70892F805D8A3308F0895F80938E +:10E71000C6008091C00086FFFCCF8091C00080645D +:10E720008093C000822F8F70982F905D9A3308F0ED +:10E73000995F9093C6008091C00086FFFCCF8091C6 +:10E74000C00080648093C00008959C01FB01853661 +:10E7500091051CF46330710594F0C90164E670E022 +:10E760000F948CFF605D7F4F6093C6008091C00066 +:10E7700086FFFCCF8091C00080648093C0002B3066 +:10E78000310514F43297B4F0C90164E670E00F94D7 +:10E790008CFF6AE070E00F948CFF605D7F4F6093A8 +:10E7A000C6008091C00086FFFCCF8091C0008064CD +:10E7B0008093C000C9016AE070E00F948CFFC0969E +:10E7C0008093C6008091C00086FFFCCF8091C0007E +:10E7D00080648093C0000895282F277020642093C0 +:10E7E0007C0020917B0086958695869590E08170CF +:10E7F000907033E0880F991F3A95E1F7277F282B17 +:10E8000020937B0080917A00806480937A008091CD +:10E810007A0086FDFCCF2091780040917900942FFA +:10E8200080E030E0282B392BC90108951F93182F61 +:10E8300080E892EE60E00F942FF31093C600809171 +:10E84000C00086FFFCCF8091C00080648093C00030 +:10E850000F944DF31F9108952F923F924F925F9224 +:10E860006F927F928F929F92AF92BF92CF92DF92E0 +:10E87000EF92FF920F931F93DF93CF93CDB7DEB745 +:10E8800062970FB6F894DEBF0FBECDBF382E622E52 +:10E89000CA01DB015C016D01772460E2262E2E01A6 +:10E8A0000894411C511C8BC081E0A81680E0B8067A +:10E8B00081E0C80680E0D80628F0C601AA27BB2759 +:10E8C0000F947EF3BB27AD2D9C2D8B2D0F947EF3E3 +:10E8D0008A2D0F947EF32092C6008091C00086FF9F +:10E8E000FCCF8091C00080648093C0009DE2909333 +:10E8F000C6008091C00086FFFCCF8091C00080647C +:10E900008093C0002092C6008091C00086FFFCCF9B +:10E910008091C00080648093C000198286017501D7 +:10E9200088249924A1E03A1651F03A1620F0B2E07A +:10E930003B1661F409C00BBFF701779007C0C70110 +:10E940000F94D5FF782E02C0F7017080872D0F94A9 +:10E950007EF32092C6008091C00086FFFCCF80919C +:10E96000C00080648093C000872D8052F401EF7056 +:10E97000F0708F3520F4E40DF51D708204C0E40DB5 +:10E98000F51D8EE280830894E11CF11C011D111D10 +:10E990000894811C911C90E18916910409F0C2CF62 +:10E9A00080E190E0A0E0B0E0A80EB91ECA1EDB1E18 +:10E9B000198AC2010F946BF30F944DF36A94662089 +:10E9C00009F072CF62960FB6F894DEBF0FBECDBFCE +:10E9D000CF91DF911F910F91FF90EF90DF90CF903B +:10E9E000BF90AF909F908F907F906F905F904F906F +:10E9F0003F902F9008952F923F924F925F926F9287 +:10EA00007F928F929F92AF92BF92CF92DF92EF92BE +:10EA1000FF920F931F93DF93CF93CDB7DEB7CD5304 +:10EA2000D1400FB6F894DEBF0FBECDBF279A2F9A04 +:10EA30008091C00082608093C00080E18093C40018 +:10EA400088E18093C1000000EE24FF248701B4E038 +:10EA5000AB2EB12CCC24DD2424C0C5010197F1F7E5 +:10EA60000894E11CF11C011D111D21E2E2162EE4A7 +:10EA7000F20620E0020720E0120718F0A1E0CA2EFB +:10EA8000D12CC801B70128E53BE140E050E00F94EC +:10EA90009FFF611571058105910519F485B18058B5 +:10EAA00085B98091C00087FD03C0C114D104A9F2CB +:10EAB000A6014F5F5F4FC25EDE4F59834883CE5140 +:10EAC000D140C25EDE4F68817981CE51D140613044 +:10EAD000710511F00D946EFFC05DDE4F1982188232 +:10EAE000C053D14060E0C15DDE4F1882CF52D140AB +:10EAF000AA24BB24C05EDE4F188219821A821B82B0 +:10EB0000C052D140CE5CDE4F188219821A821B821D +:10EB1000C253D14080E090E0A0E0B0E0ABBFFC0188 +:10EB2000A791B691C45CDE4FB983A883CC53D14082 +:10EB30000D9469FFC25EDE4FE881F981CE51D1406C +:10EB4000319709F52091C600C25EDE4F1982188206 +:10EB5000CE51D14022C02F5F3F4F4F4F5F4F2130EA +:10EB6000F2E13F07FAE74F07F0E05F0780F0C45C8F +:10EB7000DE4F08811981CC53D1400F5F1F4F19F030 +:10EB8000EE27FF27099420E030E040E050E080913C +:10EB9000C00087FFE0CF2091C600213209F094C663 +:10EBA0000894A11CB11C33E0A316B10409F08EC671 +:10EBB00000E010E018C041E24093C6008091C00020 +:10EBC00086FFFCCF8091C00080648093C0002F5FDF +:10EBD0003F4F2931310579F70F944DF30F5F1F4FE8 +:10EBE0000530110519F020E030E0E5CF1092080261 +:10EBF0001092090210920A0210920B021092040263 +:10EC00001092050210920602109207021092000262 +:10EC10001092010210920202109203028FEE90EE07 +:10EC200060E00F9466F380E191EE60E00F942FF3C3 +:10EC30008091C00087FFFCCF9091C600903608F00D +:10EC40009F759032B8F09093C6008091C00086FF07 +:10EC5000FCCF8091C00080648093C00080E28093EC +:10EC6000C6008091C00086FFFCCF8091C000806408 +:10EC70008093C000983409F4DBC19934B8F492341D +:10EC800009F45DC1933458F4903319F1903308F4CA +:10EC900018C69F33A1F1903409F013C6BDC0953456 +:10ECA00009F474C1963409F00CC69CC1923509F47C +:10ECB0002FC2933538F49C3409F4F9C1913509F029 +:10ECC00000C61CC2963509F449C2993509F0F9C548 +:10ECD0009CC485E892EE62E00F9466F31092040201 +:10ECE000109205021092060210920702109208027A +:10ECF0001092090210920A0210920B0217C189E9C0 +:10ED000092EE62E00F9466F38FEE90EE60E00F9467 +:10ED100066F381E291EE60E00F942FF381EC91EEC7 +:10ED200060E00F9466F381E391EE60E00F942FF3BF +:10ED300084EE90EE60E00F9466F381E491EE60E083 +:10ED40000F942FF386E090E061E070E00F94A5F35C +:10ED50000F944DF381E691EE60E00F942FF383ED75 +:10ED600091EE60E00F9466F381E591EE60E00F9420 +:10ED70002FF38DEC91EE60E00F9466F381E791EE56 +:10ED800060E00F942FF38EE10F947EF388E90F94E7 +:10ED90007EF381E00F947EF30F944DF381E891EEC2 +:10EDA00060E00F942FF319E0E0E0F0E010935700DB +:10EDB000E4918E2F0F947EF30F944DF381E991EE41 +:10EDC00060E00F942FF3E3E0F0E010935700E4913C +:10EDD0008E2F0F947EF30F944DF381EA91EE60E055 +:10EDE0000F942FF3E2E0F0E010935700E4918E2FA0 +:10EDF0000F947EF30F944DF381EB91EE60E00F944E +:10EE00002FF3E1E0F0E0109357001491812F0F945D +:10EE10007EF30F944DF307CF85EA92EE62E00F94F4 +:10EE200066F385E592EE60E00F9466F30F944DF380 +:10EE300000E010E019C0C8016F2D0F94DDFFFF2026 +:10EE400031F483E592EE60E00F942FF30BC0F09263 +:10EE5000C6008091C00086FFFCCF8091C000806416 +:10EE60008093C0000F5F1F4FC80181519F41AA27A7 +:10EE700097FDA095BA2FABBFFC01F7905AE2F516AB +:10EE800021F062E000301607B1F60F944DF30F94B5 +:10EE90004DF381E692EE60E00F9466F30F944DF32C +:10EEA000CC24DD2400E010E01EC0C8010F94D5FF83 +:10EEB000F82E882331F483E592EE60E00F942FF36F +:10EEC0000BC08093C6008091C00086FFFCCF80916C +:10EED000C00080648093C000FE1419F00894C11C27 +:10EEE000D11C0F5F1F4FC80181519F41AA2797FD79 +:10EEF000A095BA2FABBFFC01E7907AE2E71621F0AC +:10EF000082E00030180789F60F944DF30F944DF30B +:10EF10008CE692EE60E00F942FF3C60161E070E0A2 +:10EF20000F94A5F30F944DF30F944DF3109200023C +:10EF300010920102109202021092030274CE83EB2F +:10EF400092EE62E00F9466F3279A2F9A16C02F98DC +:10EF500080E090E0E0EDF7E03197F1F7019684363C +:10EF60009105C1F72F9A80E090E0E0EDF7E031974E +:10EF7000F1F7019684369105C1F78091C00087FFB3 +:10EF8000E6CF8091C00087FFFCCF95C48FEB92EE57 +:10EF900062E00F9466F3409100025091010260918B +:10EFA00002027091030281E020E10F942CF4809121 +:10EFB000000290910102A0910202B09103028050E0 +:10EFC0009F4FAF4FBF4F8093000290930102A093D9 +:10EFD0000202B093030280509041A040B04008F478 +:10EFE00022CEA4CF8DEC92EE62E00F9466F34091B6 +:10EFF000040250910502609106027091070280E0C0 +:10F0000020E10F942CF48091040290910502A091CC +:10F010000602B091070280509F4FAF4FBF4F8093C1 +:10F02000040290930502A0930602B0930702FBCD61 +:10F030008AED92EE62E00F9466F385E892EE60E06E +:10F040000F9466F389E992EE60E00F9466F385EA27 +:10F0500092EE60E00F9466F383EB92EE60E00F9423 +:10F0600066F38FEB92EE60E00F9466F38DEC92EE18 +:10F0700060E00F9466F38AED92EE60E00F9466F321 +:10F0800081EE92EE60E00F9466F382EF92EE60E024 +:10F090000F9466F38CE093EE60E00F9466F387E1E3 +:10F0A00093EE60E00F9466F380E393EEB9CD81EECA +:10F0B00092EE62E00F9466F381E40F9416F482E41A +:10F0C0000F9416F483E40F9416F484E40F9416F46A +:10F0D00085E40F9416F486E40F9416F487E40F94F5 +:10F0E00016F488E40F9416F48AE40F9416F48BE473 +:10F0F0000F9416F48CE40F9416F495CD82EF92EEF3 +:10F1000062E00F9466F399249394AA24BB2445C427 +:10F110008CE093EE62E00F9466F340910802509108 +:10F12000090260910A0270910B0282E020E10F94C3 +:10F130002CF48091080290910902A0910A02B091EA +:10F140000B0280509F4FAF4FBF4F809308029093A8 +:10F150000902A0930A02B0930B0265CD87E193EEFA +:10F1600062E00F9466F384EE90EE60E00F9466F335 +:10F1700089ED91EE60E00F9466F309E715EECC5D42 +:10F18000DE4F19830883C452D1406624772443019B +:10F19000CA5DDE4F19821882C652D140A401930184 +:10F1A0005695479537952795C85DDE4F2883398357 +:10F1B0004A835B83C852D140CA5DDE4F4881598182 +:10F1C000C652D1404F5F5F4FCA5DDE4F59834883BF +:10F1D000C652D140CA0162E070E00F94A5F350E23C +:10F1E0005093C6008091C00086FFFCCF8091C00084 +:10F1F00080648093C0006DE26093C6008091C0007F +:10F2000086FFFCCF8091C00080648093C00070E2D4 +:10F210007093C6008091C00086FFFCCF8091C00033 +:10F2200080648093C000C85DDE4FE880F9800A8169 +:10F230001B81C852D140BB27A12F902F8F2D0F9437 +:10F240007EF3C85DDE4F8881C852D1400F947EF3B3 +:10F2500070E2F72EF092C6008091C00086FFFCCFCE +:10F260008091C00080648093C0000DE30093C600CD +:10F270008091C00086FFFCCF8091C00080648093A5 +:10F28000C00010E21093C6008091C00086FFFCCF42 +:10F290008091C00080648093C0008BBEF3012791F1 +:10F2A000C45DDE4F2883CC52D140A22EBB24CC2497 +:10F2B000DD240894611C711C811C911C8BBEF30120 +:10F2C0008791282E332444245524142D032DF22C09 +:10F2D000EE24EA0CFB1C0C1D1D1D0894611C711C06 +:10F2E000811C911C8BBEF3013791C35DDE4F3883C7 +:10F2F000CD52D1400894611C711C811C911C8BBEA5 +:10F30000F3014791C25DDE4F4883CE52D1402DEFCD +:10F310003FEF4FEF5FEF620E731E841E951E0F943A +:10F320007EF330E23093C6008091C00086FFFCCFB0 +:10F330008091C00080648093C000C45DDE4F8881EE +:10F34000CC52D1400F947EF340E24093C6008091AE +:10F35000C00086FFFCCF8091C00080648093C00015 +:10F36000C25DDE4F8881CE52D1400F947EF350E2D1 +:10F370005093C6008091C00086FFFCCF8091C000F2 +:10F3800080648093C000C35DDE4F8881CD52D14040 +:10F390000F947EF360E26093C6008091C00086FF08 +:10F3A000FCCF8091C00080648093C0007FEFE7169F +:10F3B0007FEFF70670E0070770E0170731F48EE083 +:10F3C00092EE60E00F942FF3DFC0D801C701807088 +:10F3D000907CA070B0708050904CA040B040D1F5AF +:10F3E0002FEF3FE340E050E0E222F3220423152315 +:10F3F000C85DDE4FA880B980CA80DB80C852D1408A +:10F40000AE0CBF1CC01ED11EAA0CBB1CCC1CDD1C2C +:10F4100088E192EE60E00F942FF3BB27A12F902F8D +:10F420008F2D0F947EF38E2D0F947EF330E2309368 +:10F43000C6008091C00086FFFCCF8091C000806430 +:10F440008093C0004EE34093C6008091C00086FFC9 +:10F45000FCCF87C06EE07EEF80E090E0E622F722EE +:10F46000082319237CE0E71674E9F70670E0070724 +:10F4700070E0170709F088C0C25DDE4F8881CE5268 +:10F48000D140E82EFF2400E010E0102F0F2DFE2CBD +:10F49000EE24C35DDE4F9881CD52D140E90EF11CC0 +:10F4A000011D111DD601C50181709070A070B07052 +:10F4B000DC0199278827E80EF91E0A1F1B1F20EF81 +:10F4C00030E040E050E0A222B322C422D522F1E194 +:10F4D000AA0CBB1CCC1CDD1CFA95D1F7EA0CFB1C5A +:10F4E0000C1D1D1D41E050E060E070E0242235223B +:10F4F00046225722E5E1220C331C441C551CEA9598 +:10F50000D1F7E20CF31C041D151D57016801AA0C6C +:10F51000BB1CCC1CDD1C8FE192EE60E00F942FF33E +:10F52000C801AA27BB270F947EF3BB27A12F902FDA +:10F530008F2D0F947EF38E2D0F947EF350E2509317 +:10F54000C6008091C00086FFFCCF8091C00080641F +:10F550008093C0006EE36093C6008091C00086FF78 +:10F56000FCCF8091C00080648093C000C601AA27B0 +:10F57000BB270F947EF3BB27AD2D9C2D8B2D0F94B5 +:10F580007EF38A2D0F947EF370E27093C600809113 +:10F59000C00086FFFCCF8091C00080648093C000D3 +:10F5A000CC5DDE4FE881F981C452D140CF01AA275A +:10F5B00097FDA095BA2FABBFFC018791969160E0B3 +:10F5C0000F942FF30F944DF3CC5DDE4F088119811A +:10F5D000C452D1400E5F1F4FCC5DDE4F19830883AC +:10F5E000C452D140CA5DDE4F28813981C652D14014 +:10F5F0002933310509F417CB44E050E060E070E0B6 +:10F60000640E751E861E971EC9CD80E393EE62E0E0 +:10F610000F9466F384E292EE60E00F942FF38091F2 +:10F62000C00087FFFCCF1091C6001F751093C60065 +:10F630008091C00086FFFCCF8091C00080648093E1 +:10F64000C0000F944DF3812F81548A3108F036C1E8 +:10F65000163409F495C0173490F4133409F44EC0ED +:10F66000143430F41134F1F0123409F01DC130C0FB +:10F67000143409F459C0153409F016C16BC01A349A +:10F6800009F4C4C01B3438F4173409F48FC018349B +:10F6900009F00AC1A1C01B3409F4D2C01C3409F01E +:10F6A00003C1E8C08FEF81B90DC082B1809582B9E6 +:10F6B00080E090E0E0EDF7E03197F1F70196883CCB +:10F6C0009105C1F78091C00087FFEFCF12B8EFC05E +:10F6D0008FEF84B90DC085B1809585B980E090E049 +:10F6E000E0EDF7E03197F1F70196883C9105C1F71D +:10F6F0008091C00087FFEFCF15B8D9C08FEF87B9D1 +:10F700000DC088B1809588B980E090E0E0EDF7E029 +:10F710003197F1F70196883C9105C1F78091C000BF +:10F7200087FFEFCF18B8C3C08FEF8AB90DC08BB178 +:10F7300080958BB980E090E0E0EDF7E03197F1F74C +:10F740000196883C9105C1F78091C00087FFEFCFFB +:10F750001BB8ADC08FEF8DB90DC08EB180958EB93D +:10F7600080E090E0E0EDF7E03197F1F70196883C1A +:10F770009105C1F78091C00087FFEFCF1EB897C0F9 +:10F780008FEF80BB0DC081B3809581BB80E090E09E +:10F79000E0EDF7E03197F1F70196883C9105C1F76C +:10F7A0008091C00087FFEFCF11BA81C08FEF83BB7C +:10F7B0000DC084B3809584BB80E090E0E0EDF7E07D +:10F7C0003197F1F70196883C9105C1F78091C0000F +:10F7D00087FFEFCF14BA6BC08FEF809301010FC08A +:10F7E0008091020180958093020180E090E0E0ED3D +:10F7F000F7E03197F1F70196883C9105C1F78091C8 +:10F80000C00087FFEDCF1092020151C08FEF8093AF +:10F8100004010FC08091050180958093050180E06F +:10F8200090E0E0EDF7E03197F1F70196883C910523 +:10F83000C1F78091C00087FFEDCF1092050137C05E +:10F840008FEF809307010FC080910801809580930E +:10F85000080180E090E0E0EDF7E03197F1F70196E4 +:10F86000883C9105C1F78091C00087FFEDCF1092D1 +:10F8700008011DC08FEF80930A010FC080910B011A +:10F88000809580930B0180E090E0E0EDF7E0319708 +:10F89000F1F70196883C9105C1F78091C00087FF80 +:10F8A000EDCF10920B0103C08FE292EEB9C98091A7 +:10F8B000C00087FFFCCF8091C600B5C982E492EEFC +:10F8C000AFC98CE191EEACC9AA24BB24933061F19D +:10F8D000943028F4913089F0923008F508C09530C2 +:10F8E000B1F1953040F1963009F053C04EC02B3144 +:10F8F00009F020C991E06BE11DC9213041F0C15DE3 +:10F90000DE4F5881CF52D140251709F002C362273C +:10F91000C15DDE4F2883CF52D14092E00BC9B22F98 +:10F92000A0E0622793E006C9822F90E0A82BB92BB4 +:10F93000622794E0FFC82E3009F0EBC2622795E001 +:10F94000C05DDE4F19821882C053D140F3C8E1E098 +:10F95000F0E0EC0FFD1FC05DDE4FE880F980C05382 +:10F96000D140EE0DFF1D208387010F5F1F4FC05D4B +:10F97000DE4F19830883C053D14062270A171B0743 +:10F9800009F0D8C8D80196E0D5C8261709F0C1C239 +:10F9900003C0973009F0CEC899248981833109F4D6 +:10F9A000FCC08431C8F4863009F4C2C0873050F4FA +:10F9B000823009F4F0C0833009F458C0813009F076 +:10F9C0000AC23EC0813109F462C0823108F0A6C08B +:10F9D000803109F000C2DFC0883109F472C089317A +:10F9E00050F4853109F4D9C0853108F477C18631E6 +:10F9F00009F0F1C173C18A3109F457C08A3108F4A2 +:10FA00007CC08B3109F446C08D3109F0E4C18D8191 +:10FA1000803311F090E00AC08F81882311F49EE1B9 +:10FA200005C0813011F091E001C098E91A821B8273 +:10FA30008D818C831D829E831F8227E030E0CFC1A1 +:10FA40001A8288E08B8381E48C8386E58D8382E54E +:10FA50008E8389E48F8383E5888780E589878FE5B6 +:10FA60008A8782E38B872BE030E0B9C18A818139B4 +:10FA700041F0823941F0803911F48FE005C080E017 +:10FA800003C082E001C08AE01A828B8344C09924BB +:10FA9000939481C08D81882311F48EE12CC0813034 +:10FAA00011F081E028C088E926C01A82E1E0F0E088 +:10FAB00089E08093570084918B831C8224E030E09E +:10FAC0008EC18B81803589F48C81883039F4E2E0F5 +:10FAD000F0E089E08093570084910DC0E0E0F0E011 +:10FAE00089E080935700849106C0E3E0F0E089E06C +:10FAF0008093570084911A82DFCF8D81836C99E0C7 +:10FB0000E1E0F0E0082E90935700E89507B600FC7E +:10FB1000FDCF1A821B8223E030E061C11A82CE5CE5 +:10FB2000DE4F188219821A821B82C253D14055C1FE +:10FB30008A8190E0A0E0B0E0582F442733272227A5 +:10FB40008B8190E0A0E0B0E0DC0199278827282B8A +:10FB5000392B4A2B5B2B8D8190E0A0E0B0E0282B65 +:10FB6000392B4A2B5B2B8C8190E0A0E0B0E0BA2FC0 +:10FB7000A92F982F8827282B392B4A2B5B2B220F54 +:10FB8000331F441F551FC05EDE4F288339834A83CD +:10FB90005B83C052D1401A8220C19A812B8183316C +:10FBA00049F0C05EDE4F488159816A817B81C05235 +:10FBB000D1408AC0CE5CDE4F488159816A817B8109 +:10FBC000C253D140403080EC580783E0680780E0A2 +:10FBD0007807F0F483E0FA0160935B0080935700AC +:10FBE000E89507B600FCFDCFCE5CDE4F4881598119 +:10FBF0006A817B81C253D14040505F4F6F4F7F4F2E +:10FC0000CE5CDE4F488359836A837B83C253D140E5 +:10FC1000C95CDE4F9883C753D140CA5CDE4F18825F +:10FC2000C653D140022F10E0CA5CDE4F6881798153 +:10FC3000C653D140062B172BC05EDE4F4881598139 +:10FC40006A817B81C052D140DE011B9631E08C91EC +:10FC500011962C9111971296C75CDE4F2883C953D9 +:10FC6000D140C85CDE4F1882C853D14090E0C85CD8 +:10FC7000DE4FE881F981C853D1408E2B9F2B0C01B8 +:10FC8000FA0160935B0030935700E89511244E5FB2 +:10FC90005F4F6F4F7F4F02501040C9F685E0C05E46 +:10FCA000DE4FE880F9800A811B81C052D140F70104 +:10FCB00000935B0080935700E89507B600FCFDCFEA +:10FCC00081E180935700E8951A82C05EDE4F488339 +:10FCD00059836A837B83C052D1407FC0FA80C55C60 +:10FCE000DE4FF882CB53D140C65CDE4F1882CA5338 +:10FCF000D1408B81C82EDD24C65CDE4F088119817E +:10FD0000CA53D140C02AD12A1A828981BE016D5FAF +:10FD10007F4F843121F59601C05EDE4FE880F98087 +:10FD20000A811B81C052D1400BBFF7018791969188 +:10FD3000DB018C9311969C936E5F7F4FD801C701B6 +:10FD40000296A11DB11DC05EDE4F88839983AA83F0 +:10FD5000BB83C052D14022503040F1F636C0C05E65 +:10FD6000DE4F288139814A815B81C052D14008949D +:10FD7000C108D108760100E010E00894C11CD11C34 +:10FD80000894E11CF11C011D111DE20EF31E041F5D +:10FD9000151F21BDBB27A52F942F832F82BD2F5F59 +:10FDA0003F4F4F4F5F4FF89A80B5DB018D93BD01F8 +:10FDB0002E153F054007510761F7C05EDE4F2883CF +:10FDC00039834A835B83C052D14096012D5F3F4FF8 +:10FDD000FB01108204C080EC8A8322E030E08BE1DA +:10FDE0008093C6008091C00086FFFCCF8091C00048 +:10FDF00080648093C000C15DDE4FF881CF52D14056 +:10FE0000F093C6008091C00086FFFCCF8091C000B7 +:10FE100080648093C000432F3093C6008091C0005F +:10FE200086FFFCCF8091C00080648093C000922F39 +:10FE30002093C6008091C00086FFFCCF8091C00057 +:10FE400080648093C0008EE08093C6008091C000E3 +:10FE500086FFFCCF8091C00080648093C00065E184 +:10FE6000C15DDE4FE880CF52D1406E2569276427FF +:10FE7000FE01319610C090819093C6008091C00021 +:10FE800086FFFCCF31968091C00080648093C000D3 +:10FE90006927215030402115310569F76093C6006C +:10FEA0008091C00086FFFCCF8091C0008064809369 +:10FEB000C00085B1805885B9992081F4C15DDE4FBD +:10FEC0000881CF52D1400F5FC15DDE4F0883CF5212 +:10FED000D14090E0A0E0B0E00D949AF527982F98DB +:10FEE00080E090E020ED37E0F9013197F1F70196DD +:10FEF00084369105C9F700008091C0008D7F809302 +:10FF0000C00081E180935700E895EE27FF27099410 +:10FF1000FFCF90E00D949AF597FB092E07260AD0A3 +:10FF200077FD04D02ED006D000201AF4709561958C +:10FF30007F4F0895F6F7909581959F4F0895A1E220 +:10FF40001A2EAA1BBB1BFD010DC0AA1FBB1FEE1F53 +:10FF5000FF1FA217B307E407F50720F0A21BB30B9E +:10FF6000E40BF50B661F771F881F991F1A9469F71A +:10FF700060957095809590959B01AC01BD01CF0176 +:10FF80000895AA1BBB1B51E107C0AA1FBB1FA617E0 +:10FF9000B70710F0A61BB70B881F991F5A95A9F732 +:10FFA00080959095BC01CD010895F999FECF92BD41 +:10FFB00081BDF89A992780B50895262FF999FECF2B +:10FFC0001FBA92BD81BD20BD0FB6F894FA9AF99A76 +:0AFFD0000FBE01960895F894FFCFCC +:040000033000E000E9 +:00000001FF -- cgit v1.2.3