path: root/fetchmail.man

.\" Copyright 1993-95 by Carl Harris, Jr. Copyright 1996 by Eric S. Raymond
.\" All rights reserved.
.\" For license terms, see the file COPYING in this directory.
.TH fetchmail LOCAL
.SH NAME
fetchmail \- deliver mail fetched from a POP or IMAP server
.SH SYNOPSIS
.B fetchmail
[\fI options \fR] \fI [server-host...]\fR
.SH DESCRIPTION
.I fetchmail
is a batch mail-retrieval/forwarding utility intended to be used over
on-demand TCP/IP links (such as SLIP or PPP connections).  It fetches
mail from remote mail servers and forwards it to your local (client)
machine's delivery system.  You can then handle the retrieved mail
using normal mail user agents such as \fIelm\fR(1) or \fIMail\fR(1).
The \fBfetchmail\fR utility can be run in a daemon mode to repeatedly
poll one or more systems at a specified interval.
.PP
The
.I fetchmail
program can gather mail from servers supporting any of the common
mail-retrieval protocols: POP2 (as specified in RFC 937), POP3 (RFC
1725), IMAP2bis (as implemented by the 4.4BSD imapd program), and
IMAP4 (as specified by RFC1730).  It can use (but does not require)
the RPOP and LAST facilities removed from later POP3 versions.
.PP
As each message is retrieved \fIfetchmail\fR delivers it via SMTP to
port 25 on the machine it is running on (localhost), just as though it
were being passed in over a normal TCP/IP link.  The mail will then be
delivered locally via your system's MDA (Mail Delivery Agent, usually
\fI/usr/lib/sendmail\fR but your system may use a different one such
as \fIsmail\fR, \fImmdf\fR, or \fIqmail\fR).  All the delivery-control
mechanisms (such as \fI.forward\fR files) normally available through
your system MDA will therefore work.
.PP
The behavior of
.I fetchmail
is controlled by command-line options and a run control file,
\fI~/.fetchmailrc\fR, the syntax of which we describe below.  Command-line
options override
.I ~/.fetchmailrc
declarations.
.PP
To facilitate the use of
.I fetchmail
In scripts, pipelines, etc., it returns an appropriate exit code upon 
termination -- see EXIT CODES below.
.SH OPTIONS
The following options modify the behavior of \fIfetchmail\fR.  It is
seldom necessary to specify any of these once you have a
working \fI.fetchmailrc\fR file set up.
.TP
.B \-a, --all
Retrieve both old (seen) and new messages from the mailserver.  The
default is to fetch only messages the server has not marked seen.  Note
that POP2 retrieval, and POP3 retrieval on servers without the LAST
command, behaves as though --all is always on (see KNOWN PROBLEMS below).
.TP
.B \-S host, --smtphost host
Specify an host to forward mail to (other than localhost).
.TP
.B \-F, --flush
POP3/IMAP only.  Delete old (previously retrieved) messages from the mailserver
before retrieving new messages.
.TP
.B \-f pathname, --fetchmailrc pathname
Specify a non-default name for the 
.I .fetchmailrc
run control file.
.TP
.B \-k, --keep
Keep retrieved messages in folder on remote mailserver.  Normally, messages 
are deleted from the folder on the mailserver after they have been retrieved.
Specifying the 
.B keep 
option causes retrieved messages to remain in your folder on the mailserver.
.TP
.B \-K, --kill
Delete retrieved messages from the remote mailserver.  This
option forces retrieved mail to be deleted.  It may be useful if
you have specified a default of \fBnokill\fR in your \fI.fetchmailrc\fR.
.TP
.B \-p, \--protocol proto
Specify the protocol to used when communicating with the remote 
mailserver.  If no protocol is specified,
.I fetchmail
will try each of the supported protocols in turn, terminating after
any successful attempt.
.I proto 
may be one of the following:
.RS
.IP IMAP
IMAP2bis, a compatible subset of IMAP4.
.IP POP2
Post Office Protocol 2
.IP POP3
Post Office Protocol 3
.IP APOP
Use POP3 with MD5 authentication.
.IP RPOP
POP3 with \fI.rhosts\fR processing (not recommended).
.RE
.TP
.B \-P, --port
The  option permits you to specify a TCP/IP port to connect on.  You
will need to specify this in order to use RPOP authentication.  Otherwise
this option will seldom be necessary as all the supported protocols have
well-established default port numbers.
.TP
.B \-r folder, --remote folder
Causes a specified non-default mail folder on the mailserver to be retrieved.
The syntax of the folder name is server dependent, as is the default
behavior when no folder is specified.
.TP
.B \-s, --silent
Silent mode.  Suppresses all progress/status messages that are normally
echoed to stderr during a fetch.  If both the 
.B silent
and
.B verbose
options are specified, the 
.B verbose
option takes precedence.
.TP
.B \-u name, --username name
Specifies the user idenfication to be used when logging-in to the mailserver.
The appropriate user identification is both server and user-dependent.  
The default is your login name on the machine that is running 
.I fetchmail.
See USER AUTHENTICATION below for a complete description.
.TP
.B \-v, --verbose
Verbose mode.  All control messages passed between 
.I fetchmail
and the mailserver are echoed to stderr.  Specifying
.B verbose
causes normal progress/status messages which would be redundant or meaningless
to be modified or omitted.
.TP
.B \-N, --norewrite
Normally,
.I fetchmail
edits RFC-822 address headers (To, From, Cc, Bcc, and Reply-To) in
fetched mail so that any mail IDs local to the server are expanded to
full addresses (@ and the mail server hostname are appended).  This enables 
replies on the client to get addressed correctly (otherwise your
mailer might think they should be addressed to local users on the
client machine).  This option disables the rewrite.
.TP
.B \-V, --version
Displays the version information for your copy of 
.I fetchmail.
No POP connection is made.
Instead, for each server specified, all option information
that would be computed if
.I fetchmail.
were connecting to that server is displayed.
.PP
Each server name that you specify following the options on the
command line will be queried.  If you don't specify any servers
on the command line, each server in your 
.I ~/.fetchmailrc
file will be queried.
.PP
.SH USER AUTHENTICATION
User authentication in 
.I fetchmail
is very much like the authentication mechanism of 
.I ftp(1).
The correct user-id and password depend upon the underlying security
system at the mailserver.  
.PP
If the mailserver is a Unix machine on which you have an ordinary user 
account, your regular login name and password are used with 
.I fetchmail.
If you use the same login name on both the server and the client machines,
you needn't worry about specifying a user-id with the 
.B \-u
option \-\- 
the default behavior is to use your login name on the client machine as the 
user-id on the server machine.  If you use a different login name
on the server machine, specify that login name with the
.B \-u
option.  e.g. if your login name is 'jsmith' on a machine named 'mailgrunt',
you would start 
.I fetchmail 
as follows:
.IP
fetchmail -u jsmith mailgrunt
.PP
The default behavior of 
.I fetchmail
is to prompt you for your mailserver password before the connection is
established.  This is the safest way to use 
.I fetchmail
and ensures that your password will not be compromised.  You may also specify
your password in your
.I ~/.fetchmailrc
file.  This is convenient when using 
.I fetchmail
in daemon mode or with scripts.
.PP
On mailservers that do not provide ordinary user accounts, your user-id and 
password are usually assigned by the server administrator when you apply for 
a mailbox on the server.  Contact your server administrator if you don't know 
the correct user-id and password for your mailbox account.
.PP
POP3 versions up to the RFC1225 version supported an alternate
authentication mechanism called RPOP intended to address the security
risk inherent in sending unencrypted account passwords across the net
(in RFC1460 this facility was replaced with APOP).  If you specify the
RPOP protocol and a connection port in the privileged range (1..1024),
.I fetchmail 
will ship your password entry to the mail server as an RPOP id.
(Note: you'll need to be running fetchmail setuid root for RPOP to
work --
.I fetchmail
has to bind to a privileged port locally in order for the mail 
server to believe it's allowed to bind to a privileged remote port.)
.PP
RFC1460 introduced APOP authentication.  In this variant of POP3,
you register an APOP password on your server host (the program
to do this with on the server is probably called \fIpopauth\fR(8)).  You
put the same password in your 
.I .fetchmailrc
file.  Each time 
.I fetchmail
logs in, it sends a cryptographically secure hash of your password and
the server greeting time to the server, which can verify it by
checking its authorization database. 
.PP
.SH DAEMON MODE
The 
.B --daemon
or
.B -d 
option runs 
.I fetchmail
in daemon mode.  You must specify a numeric argument which is a
polling interval in seconds.
.PP
In daemon mode, 
.I fetchmail
puts itself in background and runs forever, querying each specified
host and then sleeping for the given polling interval.
.PP
Simply invoking
.IP
fetchmail -d 900
.PP
will, therefore, poll the hosts described in your 
.I ~/.fetchmailrc
file once every fifteen minutes.
.PP
Only one daemon process is permitted per user; in daemon mode,
.I fetchmail
makes a per-user lockfile to guarantee this.  The option
.B --quit
will kill a running daemon process.
.PP
The
.B -L
or
.B --logfile
option allows you to redirect status messages emitted while in daemon
mode into a specified logfile (follow the option with the logfile name).
This is primarily useful for debugging configurations.
.SH THE RUN CONTROL FILE
The preferred way to set up fetchmail (and the only way if you want to
specify a password) is to write a .fetchmailrc file in your home directory.
To protect the security of your passwords, your ~/.fetchmailrc may not have
more than u+r,u+w permissions; 
.I fetchmail
will complain and exit otherwise.
.PP
Comments begin with a '#' and extend through the end of the line.
Otherwise the file consists of a series of server entries.
Blank lines between server entries are ignored.
Keywords and identifiers are case sensitive.
When there is a conflict between the command-line arguments and the
arguments in this file, the command-line arguments take precedence.
.PP
Legal keywords are:

    server
    protocol (or proto)
    username (or user)
    password (or pass)
    remotefolder (or remote)
    mda
    smtphost (or smtp)
    keep
    flush
    fetchall
    rewrite
    skip
    nokeep
    noflush
    nofetchall
    norewrite
    noskip
    port
.PP
All these correspond to the obvious command-line arguments except
two: \fBpassword\fR and \fBskip\fR.
.PP
The \fBpassword\fR option requires a string argument, which is the password
to be used with the entry's server.
.PP
The \fBskip\fR option tells
.I fetchmail 
not to query this host unless it is explicitly named on the command
line.  A host entry with this flag will be skipped when
.I fetchmail
called with no arguments steps through all hosts in the run control file.
(This option allows you to experiment with test entries safely.)
.PP
Legal protocol identifiers are

    auto (or AUTO)
    pop2 (or POP2)
    pop3 (or POP3)
    imap (or IMAP)
    apop (or APOP)
    rpop (or RPOP)
.PP
Basic format is:

.nf
  server SERVERNAME protocol PROTOCOL username NAME password PASSWORD 
.fi
.PP
Example:

.nf
  server pop.provider.net protocol pop3 username jsmith password secret1
.fi
.PP
Or, using some abbreviations:

.nf
  server pop.provider.net proto pop3 user jsmith password secret1
.fi
.PP
Multiple servers may be listed:

.nf
  server pop.provider.net proto pop3 user jsmith pass secret1
  server other.provider.net proto pop2 user John.Smith pass My^Hat
.fi
.PP
Other possibilities (note use of \ to escape newline -- this is now
optional, not required as in older versions):

.nf
  server pop.provider.net       \e
        proto pop3              \e
        port 3111               \e
        user jsmith             \e
        pass secret1
.fi
If you need to include whitespace in a parameter string, enclose the
string in double quotes.  Thus:

.nf
  server mail.provider.net
        proto pop3
        user jsmith
        pass "u can't krak this"
.fi

Finally, you may have an initial server description headed by the keyword
`defaults' instead of `server' followed by a name.  Such a record
is interpreted as defaults for all queries to use. It may be overwritten
by individual server descriptions.  So, you could write:

.nf
  defaults                      \e
        proto pop3              \e
        user jsmith             \e
  server pop.provider.net       \e
        pass secret1            \e
  server mail.provider.net      \e
        pass secret2
.fi

.SH EXIT CODES
To facilitate the use of 
.I fetchmail
in shell scripts, an exit code is returned to give an indication
of what occurred during a given connection.
.PP
The exit codes returned by 
.I fetchmail
are as follows:
.IP 0
One or more messages were successfully retrieved.
.IP 1
There was no mail awaiting retrieval.
.IP 2
An error was encountered when attempting to open a socket for the POP 
connection.  If you don't know what a socket is, don't worry about it --
just treat this as an 'unrecoverable error'.
.IP 3
The user authentication step failed.  This usually means that a bad 
user-id, password, or RPOP id was specified.
.IP 4
Some sort of fatal protocol error was detected.
.IP 5
There was a syntax error in the arguments to 
.I fetchmail.
.IP 6
The run control file had bad permissions.
.IP 7
There was an error condition reported by the server (POP3 only).
.IP 8
Exclusion error.  This means 
.I fetchmail
either found another copy of itself already running, or failed in such
a way that it isn't sure whether another copy is running.
.IP 9
The 
.I fetchmail.
run failed while trying to do an SMTP port open or transaction.
.IP 10
Something totally undefined occured.  This is usually caused by a bug within
.I fetchmail.
Do let me know if this happens.
.PP
When
.I fetchmail
queries more than one host, the returned status is that of the last
host queried.
.SH AUTHORS
.I fetchmail
was originated (under the name `popclient') by Carl Harris at Virginia
Polytechnic Institute and State University (a.k.a. Virginia Tech).
.PP
Version 3.0 of popclient was extensively rewritten and improved by
Eric S. Raymond <esr@snark.thyrsus.com>. The program's name was
then changed to
.I fetchmail
to reflect both the presence of IMAP support and the symmetry with sendmail
created by the new SMTP forwarding default.
.PP
.SH FILES
.TP 5
~/.fetchmailrc
default run control file
.TP 5
${TMPDIR}/fetchmail-${HOST}-${USER}
lock file to help prevent concurrent runs.
.SH ENVIRONMENT
For correct initialization, 
.I fetchmail
requires either that both the USER and HOME environment variables are
correctly set, or that \fBgetpwuid\fR(3) be able to retrieve a password
entry from your user ID.
.SH OLD-MESSAGE PROBLEMS
The normal mode of \fIfetchmail\fR is to try to download only `new'
messages, leaving untouched (and undeleted) messages you have already
read directly on the server (or fetched with a previous \fIfetchmail
--keep\fR).  But you may find that messages you've already read on the
server are being fetched and deleted even when you don't specify
--all.  There are several reasons this can happen.
.PP
One could be that you're using POP2.  The POP2 protocol includes no
representation of `new' or `old' state in messages, so \fIfetchmail\fR
must treat all messages as new all the time.
.PP
Under POP3, blame RFC1725.  That late version of the POP3 protocol
specification ill-advisedly removed the LAST command, and some POP
servers (including the one distributed with at least some versions of
SunOS) follow it (you can verify this by invoking \fIfetchmail -v\fR
and watching the response to LAST early in the query).  The fix is to
install an older POP3 server with LAST or switch to an IMAP server.
.PP
The IMAP code uses the presence or absence of the server flag \eSeen
to decide whether or not a message is new.  Under Unix, it counts on
your IMAP server to notice the BSD-style Status flags set by mail user
agents and set the \Seen flag from them when appropriate.  All Unix
IMAP servers we know of do this, though it's not specified by the IMAP
RFCs.  If you ever trip over a server that doesn't, the symptom will
be that messages you have already read on your host will look new to
the server.  In this (unlikely) case, only messages you fetched with
\fIfetchmail --keep\fR will be both undeleted and marked old.
.SH OTHER KNOWN PROBLEMS
Use of any of the supported protocols other than APOP requires that
the program send unencrypted passwords over the TCP/IP connection to
the mail server.  This creates a risk that name/password pairs might
be snaffled with a packet sniffer or more sophisticated monitoring
software.
.pp
Running more than one concurrent instance of
.I fetchmail
in POP2 or POP3 mode pointed at the same mailbox may cause messages to
be lost or remain unfetched. (This is a design problem of the POP2 and
POP3 protocols; IMAP is less vulnerable.)
.PP
The RPOP support is not yet well tested.
.PP
Send comments, bug reports, gripes, and the like to Eric S. Raymond
<esr@thyrsus.com>.
.SH NOTES
This program used to be called `popclient' (the name was changed
because it supports IMAP now and may well support more remote-fetch
protocols such as DMSP in the future).
.PP
The --stdout, --local, --mda and --limit arguments of previous
versions have been removed, greatly simplifying the code and making it
faster.  Those features did jobs that belonged to your local MDA and
mail reader. The job of
.I popclient
is to forward local mail to your MDA, not to be one.  Saint-Exupery
said, "Perfection [in design] is achieved not when there is nothing
more to add, but rather when there is nothing more to take away."
This program isn't perfect, but it's trying.
.PP
The --password option of previous (popclient) versions has been removed -- it
encouraged people to expose passwords in scripts.  Passwords
must now be specified either interactively or in your
.I ~/.fetchmailrc
file.  The short-form -p option now specifies the protocol to use.
.PP
The reason the password isn't stored encrypted is because this doesn't
actually add protection.  Anyone who's acquired permissions to read your
fetchmailrc file will be able to run 
.I fetchmail
as you anyway -- and if it's
your password they're after, they'd be able to use the necessary decoder from
.I fetchmail
itself to get it.  All encryption would do in this context is give a
false sense of security to people who don't think very hard.
.SH SEE ALSO
mail(1), binmail(1), sendmail(8), popd(8), imapd(8)
RFC 937, RFC 1081, RFC 1082, RFC1176, RFC 1225, RFC 1460, RFC 1725.