path: root/fetchmail.man

.\" For license terms, see the file COPYING in this directory.
.TH fetchmail LOCAL
.SH NAME
fetchmail \- fetch mail from a POP or IMAP server
.SH SYNOPSIS
.B fetchmail
[\fI options \fR] \fI [mailserver...]\fR
.SH DESCRIPTION
.I fetchmail
is a mail-retrieval and forwarding utility; it fetches
mail from remote mailservers and forwards it to your local (client)
machine's delivery system.  You can then handle the retrieved mail
using normal mail user agents such as \fIelm\fR(1) or \fIMail\fR(1).
The \fBfetchmail\fR utility can be run in a daemon mode to repeatedly
poll one or more systems at a specified interval.
.PP
The
.I fetchmail
program can gather mail from servers supporting any of the common
mail-retrieval protocols: POP2 (as specified in RFC 937), POP3 (RFC
1939), IMAP2bis (as implemented by the 4.4BSD imapd program), and
IMAP4 (as specified by RFC 1730).  It can use (but does not require)
the LAST facility removed from later POP3 versions.
.PP
While
.I fetchmail
is primarily intended to be used over on-demand TCP/IP links (such as
SLIP or PPP connections), it may also be useful as a message transfer
agent for sites which refuse for security reasons to permit
(sender-initiated) SMTP transactions with sendmail.
.PP
As each message is retrieved \fIfetchmail\fR normally delivers it via SMTP to
port 25 on the machine it is running on (localhost), just as though it
were being passed in over a normal TCP/IP link.  The mail will then be
delivered locally via your system's MDA (Mail Delivery Agent, usually
\fIsendmail\fR(8) but your system may use a different one such
as \fIsmail\fR, \fImmdf\fR, or \fIqmail\fR).  All the delivery-control
mechanisms (such as \fI.forward\fR files) normally available through
your system MDA will therefore work.
.PP
The behavior of
.I fetchmail
is controlled by command-line options and a run control file,
\fI~/.fetchmailrc\fR, the syntax of which we describe below.  Command-line
options override
.I ~/.fetchmailrc
declarations.
.PP
To facilitate the use of
.I fetchmail
In scripts, pipelines, etc., it returns an appropriate exit code upon 
termination -- see EXIT CODES below.
.SH OPTIONS
The following options modify the behavior of \fIfetchmail\fR.  It is
seldom necessary to specify any of these once you have a
working \fI.fetchmailrc\fR file set up.
.TP
.B \-a, --all
Retrieve both old (seen) and new messages from the mailserver.  The
default is to fetch only messages the server has not marked seen.
Note that POP2 retrieval behaves as though --all is always on (see
RETRIEVAL FAILURE MODES below).
.TP
.B \-l, --limit
Takes a maximum octet size argument.  Messages larger than this size
will not be fetched, not be marked seen, and will be left on the
server (in foreground sessions, the progress messages will note that
they are "oversized").  The --all option overrides this one.  This
option is intended for those need to strictly control fetch time
in interactive mode.  It may not be used with daemon mode,
as users would never receive a notification that messages were waiting.
.TP
.B \-S host, --smtphost host
Specify a host to forward mail to (other than localhost).
.TP
.B \-m, \--mda
You can force mail to be passed to an MDA directly (rather than
forwarded to port 25) with the -mda or -m option.  If \fIfetchmail\fR
is running as root, it sets its userid to that of the target user
while delivering mail through an MDA.  Some possible MDAs are
"/usr/sbin/sendmail -oem", "/usr/lib/sendmail -oem",
"/usr/bin/formail", and "/usr/bin/deliver".  Local delivery addresses
will be appended to the MDA command.  Do \fInot\fR use an MDA like
"sendmail -oem -t" that dispatches on the contents of To/Cc/Bcc, it
will create mail loops and bring the just wrath of many postmasters
down upon your head.
.TP
.B \-F, --flush
POP3/IMAP only.  Delete old (previously retrieved) messages from the mailserver
before retrieving new messages.
.TP
.B \-c, --check
Return a status code to indicate whether there is mail waiting,
without actually fetching or deleting mail (see EXIT CODES below).
This option doesn't play well with queries to multiple sites, and
is ignored in daemon mode.  It's also prone to false positives if
you leave read but undeleted mail in your server mailbox.
.TP
.B \-f pathname, --fetchmailrc pathname
Specify a non-default name for the 
.I .fetchmailrc
run control file.
.TP
.B \-i pathname, --idfile pathname
Specify an alternate name for the .fetchids file used to save POP3
UIDs. 
.TP
.B \-k, --keep
Keep retrieved messages on the remote mailserver.  Normally, messages 
are deleted from the folder on the mailserver after they have been retrieved.
Specifying the 
.B keep 
option causes retrieved messages to remain in your folder on the mailserver.
.TP
.B \-K, --kill
Delete retrieved messages from the remote mailserver.  This
option forces retrieved mail to be deleted.  It may be useful if
you have specified a default of \fBnokill\fR in your \fI.fetchmailrc\fR.
.TP
.B \-p, \--protocol proto
Specify the protocol to used when communicating with the remote 
mailserver.  If no protocol is specified,
.I fetchmail
will try each of the supported protocols in turn, terminating after
any successful attempt.
.I proto 
may be one of the following:
.RS
.IP IMAP
IMAP2bis, a compatible subset of IMAP4.
.IP POP2
Post Office Protocol 2
.IP POP3
Post Office Protocol 3
.IP APOP
Use POP3 with MD5 authentication.
.IP KPOP
Use POP3 with Kerberos authentication on port 1109.
.RE
.TP
.B \-P, --port
The  option permits you to specify a TCP/IP port to connect on. 
This option will seldom be necessary as all the supported protocols have
well-established default port numbers.
.TP
.B \-A, --auth
This option permits you to specify an authentication type (see USER
AUTHENTICATION below for details).  The possible values are
\&`\fBpassword\fR' and `\fBkerberos\fR'.  This option is provided
primarily for developers; choosing KPOP protocol automatically selects
Kerberos authentication, and all other alternatives use ordinary
password authentication (though APOP uses a generated one-time
key as the password).
.TP
.B \-r folder, --remote folder
Causes a specified non-default mail folder on the mailserver to be retrieved.
The syntax of the folder name is server dependent, as is the default
behavior when no folder is specified.  This option is not available
under POP3.
.TP
.B \-s, --silent
Silent mode.  Suppresses all progress/status messages that are normally
echoed to standard error during a fetch.  The --verbose option
overrides this.
.TP
.B \-v, --verbose
Verbose mode.  All control messages passed between 
.I fetchmail
and the mailserver are echoed to stderr.  Overrides --silent.
.TP
.B \-u name, --username name
Specifies the user identification to be used when logging in to the mailserver.
The appropriate user identification is both server and user-dependent.  
The default is your login name on the client machine that is running 
.I fetchmail.
See USER AUTHENTICATION below for a complete description.
.TP
.B \-n, --norewrite
Normally,
.I fetchmail
edits RFC-822 address headers (To, From, Cc, Bcc, and Reply-To) in
fetched mail so that any mail IDs local to the server are expanded to
full addresses (@ and the mailserver hostname are appended).  This enables 
replies on the client to get addressed correctly (otherwise your
mailer might think they should be addressed to local users on the
client machine).  This option disables the rewrite.
.TP
.B \-V, --version
Displays the version information for your copy of 
.I fetchmail.
No mail fetch is performed.
Instead, for each server specified, all option information
that would be computed if
.I fetchmail.
were connecting to that server is displayed.  Any non-printables in
passwords or other string names are shown as backslashed C-like
escape sequences.
.PP
Each server name that you specify following the options on the
command line will be queried.  If you don't specify any servers
on the command line, each server in your 
.I ~/.fetchmailrc
file will be queried.
.SH USER AUTHENTICATION
Normal user authentication in 
.I fetchmail
is very much like the authentication mechanism of 
.I ftp(1).
The correct user-id and password depend upon the underlying security
system at the mailserver.  
.PP
If the mailserver is a Unix machine on which you have an ordinary user 
account, your regular login name and password are used with 
.I fetchmail.
If you use the same login name on both the server and the client machines,
you needn't worry about specifying a user-id with the 
.B \-u
option \-\- 
the default behavior is to use your login name on the client machine as the 
user-id on the server machine.  If you use a different login name
on the server machine, specify that login name with the
.B \-u
option.  e.g. if your login name is 'jsmith' on a machine named 'mailgrunt',
you would start 
.I fetchmail 
as follows:
.IP
fetchmail -u jsmith mailgrunt
.PP
The default behavior of 
.I fetchmail
is to prompt you for your mailserver password before the connection is
established.  This is the safest way to use 
.I fetchmail
and ensures that your password will not be compromised.  You may also specify
your password in your
.I ~/.fetchmailrc
file.  This is convenient when using 
.I fetchmail
in daemon mode or with scripts.
.PP
On mailservers that do not provide ordinary user accounts, your user-id and 
password are usually assigned by the server administrator when you apply for 
a mailbox on the server.  Contact your server administrator if you don't know 
the correct user-id and password for your mailbox account.
.PP
RFC1460 introduced APOP authentication.  In this variant of POP3,
you register an APOP password on your server host (the program
to do this with on the server is probably called \fIpopauth\fR(8)).  You
put the same password in your 
.I .fetchmailrc
file.  Each time 
.I fetchmail
logs in, it sends a cryptographically secure hash of your password and
the server greeting time to the server, which can verify it by
checking its authorization database. 
.PP
If your \fIfetchmail\fR was built with Kerberos support and you specify 
Kerberos authentication (either with --auth or the \fI.fetchmailrc\fR
option \fBauthenticate kerberos\fR) it will try to get a Kerberos
ticket from the mailserver at the start of each query. 
.SH DAEMON MODE
The 
.B --daemon
or
.B -d 
option runs 
.I fetchmail
in daemon mode.  You must specify a numeric argument which is a
polling interval in seconds.
.PP
In daemon mode, 
.I fetchmail
puts itself in background and runs forever, querying each specified
host and then sleeping for the given polling interval.
.PP
Simply invoking
.IP
fetchmail -d 900
.PP
will, therefore, poll all the hosts described in your 
.I ~/.fetchmailrc
file (except those explicitly excluded with the `skip' verb) once
every fifteen minutes.
.PP
Only one daemon process is permitted per user; in daemon mode,
.I fetchmail
makes a per-user lockfile to guarantee this.  The option
.B --quit
will kill a running daemon process.  Otherwise, calling fetchmail with
a daemon in the background sends a wakeup signal to the daemon,
forcing it to poll mailservers immediately.
.PP
The 
.B -t
or
.B --timeout
option allows you to set a server-nonresponse timeout in seconds.  If
a mailserver does not send a greeting message or respond to commands for
the given number of seconds, \fIfetchmail\fR will hang up on it.
Without such a timeout \fIfetchmail\fR might hang up indefinitely
trying to fetch mail from a down host.  This would be particularly
annoying for a \fIfetchmail\fR running in background.
.PP
The
.B -L
or
.B --logfile
option allows you to redirect status messages emitted while in daemon
mode into a specified logfile (follow the option with the logfile name).
The logfile is opened for append, so previous messages aren't deleted.
This is primarily useful for debugging configurations.
.PP
The 
.B \-N
or --nodetach option suppresses detachment of the daemon process
from its control terminal.  This is primarily useful for debugging.
.SH RETRIEVAL FAILURE MODES
The protocols \fIfetchmail\fR uses to talk to mailservers are next to
bulletproof.  In normal operation forwarding to port 25, no message is
ever deleted (or even marked for deletion) on the host until the SMTP
listener on the client has acknowledged to \fIfetchmail\fR that the
message has been accepted for delivery.  When forwarding to an MDA,
however, there is more possibility of error (because there's no way
for fetchmail to get a reliable positive acknowledgement from the MDA).
.PP
The normal mode of \fIfetchmail\fR is to try to download only `new'
messages, leaving untouched (and undeleted) messages you have already
read directly on the server (or fetched with a previous \fIfetchmail
--keep\fR).  But you may find that messages you've already read on the
server are being fetched (and deleted) even when you don't specify
--all.  There are several reasons this can happen.
.PP
One could be that you're using POP2.  The POP2 protocol includes no
representation of `new' or `old' state in messages, so \fIfetchmail\fR
must treat all messages as new all the time.  But POP2 is obsolete, so
this is unlikely.
.PP
Under POP3, blame RFC1725.  That version of the POP3 protocol
specification removed the LAST command, and some POP servers follow it
(you can verify this by invoking \fIfetchmail -v\fR to the mailserver
and watching the response to LAST early in the query).  The
\fIfetchmail\fR code tries to compensate by using POP3's UID feature,
storing the identifiers of messages seen in each session until the
next session, in the \fI.fetchids\fR file.  But this doesn't track
messages seen with other clients, or read directly with a mailer on
the host but not deleted afterward.  A better solution would be to
switch to IMAP.
.PP
Another potential POP3 problem might be servers that insert messages
in the middle of mailboxes (some VMS implementations of mail are
rumored to do this).  The \fIfetchmail\fR code assumes that new
messages are appended to the end of the mailbox; when this is not true
it may treat some old messages as new and vice versa.  The only 
real fix for this problem is to  switch to IMAP.
.PP
The IMAP code uses the presence or absence of the server flag \eSeen
to decide whether or not a message is new.  Under Unix, it counts on
your IMAP server to notice the BSD-style Status flags set by mail user
agents and set the \Seen flag from them when appropriate.  All Unix
IMAP servers we know of do this, though it's not specified by the IMAP
RFCs.  If you ever trip over a server that doesn't, the symptom will
be that messages you have already read on your host will look new to
the server.  In this (unlikely) case, only messages you fetched with
\fIfetchmail --keep\fR will be both undeleted and marked old.
.SH THE RUN CONTROL FILE
The preferred way to set up fetchmail (and the only way if you want to
avoid specifying passwords each time it runs) is to write a
\fI.fetchmailrc\fR file in your home directory.  To protect the security
of your passwords, your \fI~/.fetchmailrc\fR may not have more than u+r,u+w
permissions;
.I fetchmail
will complain and exit otherwise.
.PP
You may read the \fI.fetchmailrc\fR file as a list of commands to 
be executed when 
.I fetchmail
is called with no arguments.
.PP
Comments begin with a '#' and extend through the end of the line.
Otherwise the file consists of a series of free-format server entries.
Any amount of whitespace separates keywords, tokens, or strings in
server entries, but is otherwise ignored (except that whitespace
enclosed in double quotes is treated as part of the string).  Keywords
and identifiers are case sensitive.  You may use standard C-style
escapes (\en, \et, \eb, octal, and hex) to embed non-printable
characters or string delimiters in strings.  When there is a conflict
between the command-line arguments and the arguments in this file, the
command-line arguments take precedence.
.PP
Each server entry consists of one of the keywords `poll' or `skip',
followed by a server name, followed by server options, followed by any
number of user descriptions.
.PP
The `poll' verb tells fetchmail to query this host when it is run with
no arguments.  The `skip' verb tells
.I fetchmail 
not to poll this host unless it is explicitly named on the command
line.  (The `skip' verb allows you to experiment with test entries
safely, or easily disable entries for hosts that are temporarily down.)
.PP
Legal server options are:

    protocol (or proto)
    port
    authenticate (or auth)
    timeout

Legal user options are

    username (or user)
    is
    to
    password (or pass)
    remotefolder (or remote)
    smtphost (or smtp)
    mda
    keep
    flush
    fetchall
    rewrite
    nokeep
    noflush
    nofetchall
    norewrite
.PP
All options correspond to the obvious command-line arguments except
three: `is', `to', and `password'
.PP
The `is' or `to' keywords associate the following local (client)
name(s) (or server-name to client-name mappings separated by =) with
the mailserver user name in the entry.
.PP
A single local name can be used to support redirecting your mail when
your username on the client machine is different from your name on the
mailserver.  When there is only a single local name, mail is forwarded
to that local username regardless of the message's To, Cc, and Bcc headers.
.PP
When there is more than one local name (or name mapping) the
\fIfetchmail\fR code does look at the To, Cc, and Bcc headers of
retrieved mail. When a declared mailserver username is recognized, its
local mapping is added to the list of local recipients.  If
\fIfetchmail\fR cannot recognize any mailserver usernames, the default
recipient is the calling user, unless the calling user is root in
which case it is the remote user name of the current entry.
.PP
The \fBpassword\fR option requires a string argument, which is the password
to be used with the entry's server.
.PP
The \fBaliases\fR option declares names that are recognized as OK for
local delivery.  Your local name is automatically one of these; the
aliases directive can be used to declare others.   
.PP
Legal protocol identifiers are

    auto (or AUTO)
    pop2 (or POP2)
    pop3 (or POP3)
    imap (or IMAP)
    apop (or APOP)
    kpop (or KPOP)

.PP
Legal authentication types are `password' or `kerberos'.  The former
specifies authentication by normal transmission of a password (the
password may be plaintext or subject to protocol-specific encryption
as in APOP); the second tells \fIfetchmail\fR to try to get a Kerberos
ticket at the start of each query instead, and send an arbitrary
string as the password.
.PP
Specifying `kpop' sets POP3 protocol over port 1109 with Kerberos
authentication.  These defaults may be overridden by later options.
.PP
You can use the noise keywords `and', `with',
`has', `wants', and `options' anywhere in an entry to make
it resemble English.  They're ignored, but but can make entries much
easier to read at a glance.  The punctuation characters ':', ';' and
',' are also ignored.
.PP
The words `here' and `there' have useful English-like
significance.  Normally `user eric is esr' would mean that 
mail for the remote user `eric' is to be delivered to `esr',
but you can make this clearer by saying `user eric there is esr here',
or reverse it by saying `user esr here is eric there'
.PP
For backward compatibility, the word `server' is a syninym for `poll'.
.PP
Basic format is:

.nf
  poll SERVERNAME protocol PROTOCOL username NAME password PASSWORD 
.fi
.PP
Example:

.nf
  poll pop.provider.net protocol pop3 username jsmith password secret1
.fi
.PP
Or, using some abbreviations:

.nf
  poll pop.provider.net proto pop3 user jsmith password secret1
.fi
.PP
Multiple servers may be listed:

.nf
  poll pop.provider.net proto pop3 user jsmith pass secret1
  poll other.provider.net proto pop2 user John.Smith pass My^Hat
.fi

Here's a version of those two with more whitespace and some noise words: 

.nf
  poll pop.provider.net proto pop3
      user jsmith, with password secret1, is jsmith here;
  poll other.provider.net proto pop2:
      user John.Smith with password My^Hat, is John.Smith here;
.fi

This version is much easier to read and doesn't cost significantly
more (parsing is done only once, at startup time).

.PP
If you need to include whitespace in a parameter string, enclose the
string in double quotes.  Thus:

.nf
  poll mail.provider.net with proto pop3:
        user jsmith there has password "u can't krak this"
                    is jws here and wants mda "/bin/mail"
.fi

You may have an initial server description headed by the keyword
`defaults' instead of `poll' followed by a name.  Such a record
is interpreted as defaults for all queries to use. It may be overwritten
by individual server descriptions.  So, you could write:

.nf
  defaults proto pop3
        user jsmith
  poll pop.provider.net
        pass secret1
  poll mail.provider.net
        user jjsmith there has password secret2
.fi

It's possible to specify more than one user per server (this is only
likely to be useful when running fetchmail in daemon mode as root).
The `user' keyword leads off a user description, and every user
description except optionally the first one must include it.  (If the
first description lacks the `user' keyword, the name of the
invoking user is used.) Here's a contrived example:

.nf
  poll pop.provider.net proto pop3 port 3111
        pass gumshoe
        user jsmith with pass secret1 is smith here
        user jones with pass secret2 is jjones here
.fi

This says that the user invoking \fIfetchmail\fR has the same username
on pop.provider.net, and password `gumshoe' there.
It also associates the local username `smith' with the pop.provider.net
username `jsmith' and the local username `jones' with the pop.provider.net
username `jjones'.
.PP
This example is contrived because, in practice, you are very unlikely
to be specifying multiple users per server unless running it as root
(thus the `pass gumshoe' would try to fetch root's mail on
pop-provider.net, which is probably not what you want).
In any case, we strongly recommend always having an explicit
\&`user' clause when specifying multiple users for server.
.PP
Here's what a simple retrieval configuration for a multi-drop mailbox
looks like:

.nf
  poll pop.provider.net:
        user maildrop with pass secret1 to golux hurkle=happy snark here
.fi

This says that the mailbox of account `maildrop' on the server is a
multi-drop box, and that messages in it should be parsed for the
server user names `golux', `hurkle', and `snark'.  It further
specifies that `golux' and `snark' have the same name on the
client as on the server, but mail for server user `hurkle' should be
delivered to client user `happy'.
.PP
Local names can also be used to administer a mailing list from the
client side of a \fIfetchmail\fR collection.  Suppose your name is
\&`esr', and you want to both pick up your own mail and maintain a mailing
list called (say) "fetchmail-friends", and you want to keep the alias
list on your client machine.  On your server, you can alias
\&`fetchmail-friends' to `esr'; then, in your \fI.fetchmailrc\fR, declare
\&`to esr fetchmail-friends here'.  Then, when mail including `fetchmail'
in any of its recipient lines line gets fetched, the alias will be
appended to the list of recipients your SMTP listener sees.  Therefore
it will undergo alias expansion locally.
.SH EXIT CODES
To facilitate the use of 
.I fetchmail
in shell scripts, an exit code is returned to give an indication
of what occurred during a given connection.
.PP
The exit codes returned by 
.I fetchmail
are as follows:
.IP 0
One or more messages were successfully retrieved.
.IP 1
There was no mail awaiting retrieval.
.IP 2
An error was encountered when attempting to open a socket for the POP 
connection.  If you don't know what a socket is, don't worry about it --
just treat this as an 'unrecoverable error'.
.IP 3
The user authentication step failed.  This usually means that a bad 
user-id, password, or APOP id was specified.
.IP 4
Some sort of fatal protocol error was detected.
.IP 5
There was a syntax error in the arguments to 
.I fetchmail.
.IP 6
The run control file had bad permissions.
.IP 7
There was an error condition reported by the server (POP3 only).
.IP 8
Exclusion error.  This means 
.I fetchmail
either found another copy of itself already running, or failed in such
a way that it isn't sure whether another copy is running.
.IP 9
The 
.I fetchmail.
run failed while trying to do an SMTP port open or transaction.
.IP 10
Internal error.  You should see a message on standard error with
details.
.PP
When
.I fetchmail
queries more than one host, the returned status is that of the last
host queried.
.SH AUTHORS
.I fetchmail
was originated (under the name `popclient') by Carl Harris at Virginia
Polytechnic Institute and State University (a.k.a. Virginia Tech).
.PP
Version 3.0 of popclient was extensively rewritten and improved by
Eric S. Raymond <esr@snark.thyrsus.com>. The program's name was
then changed to
.I fetchmail
to reflect both the presence of IMAP support and the symmetry with sendmail
created by the new SMTP forwarding default.
.SH BACKWARD COMPATIBILITY
If called through a link named `popclient', \fIfetchmail\fR will look
in ~/.poprc for its run control file.  As long as the file does not
use the removed `localfolder' option or `limit' (which now takes a
maximum byte size rather than a line count), this will often work.
(The new run control file syntax also has to be a little stricter
about the order of options than the old, in order to support multiple
user desriptions per server; thus you may have to rearrange things a
bit.)
.SH FILES
.TP 5
~/.fetchmailrc
default run control file
.TP 5
~/.fetchids
default location of file associating hosts with last message IDs seen
(used only with newer RFC1725-compliant POP3 servers supporting the
UIDL command).
.TP 5
${TMPDIR}/fetchmail-${USER}
lock file to help prevent concurrent runs.
.SH ENVIRONMENT
For correct initialization, 
.I fetchmail
requires either that both the USER and HOME environment variables are
correctly set, or that \fBgetpwuid\fR(3) be able to retrieve a password
entry from your user ID.
.SH BUGS AND KNOWN PROBLEMS
Use of any of the supported protocols other than APOP or KPOP requires
that the program send unencrypted passwords over the TCP/IP connection
to the mailserver.  This creates a risk that name/password pairs
might be snaffled with a packet sniffer or more sophisticated
monitoring software.
.PP
Retrieval and forwarding from multi-drop server mailboxes is at most
as reliable as your mail server host's DNS service.  Each host address
part in each message of a multi-drop mailbox is looked up through DNS
to see if it's an alias of the mail server (the method \fIwill\fR
catch equivalences created by MX records).  If it is an alias of the
server, but the lookup fails due to network congestion or a crashed
server, forwarding will not get done correctly.
.PP
Presently, 
.I fetchmail
cannot handle a response longer than your machine's atomic read size
for sockets.
.PP
Under Linux, if fetchmail is run in daemon mode with the network
inaccessible, each poll leaves a socket allocated but in CLOSE state
(this is visible in netstat(1)'s output).  For some reason, these
sockets aren't garbage-collected until \fIfetchmail\fR exits.  When
whatever kernel table is involved fills up, fetchmail can no longer
run even if the network is up.  This appears \fInot\fR to be a socket
leak in \fIfetchmail\fR, but rather some glitch or misfeature in the system
network code.  To avoid this problem, fetchmail commits seppuku after
too many unsuccessful socket opens.
.PP
Send comments, bug reports, gripes, and the like to Eric S. Raymond
<esr@thyrsus.com>.
.SH SEE ALSO
elm(1), mail(1), sendmail(8), popd(8), imapd(8);
RFC 937, RFC 1081, RFC1176, RFC 1225, RFC 1460, RFC 1725, RFC1939.