From 88f8c58d0d2c61effc7a37b10747005ecbf1b381 Mon Sep 17 00:00:00 2001 From: "Eric S. Raymond" Date: Sun, 28 Jul 2002 09:23:04 +0000 Subject: XML conversion svn path=/trunk/; revision=3669 --- design-notes.html | 1120 +++++++++++++++++++++++++++++++---------------------- 1 file changed, 653 insertions(+), 467 deletions(-) diff --git a/design-notes.html b/design-notes.html index bfaff074..d2d48d6b 100644 --- a/design-notes.html +++ b/design-notes.html @@ -1,566 +1,752 @@ - - - -Design notes on fetchmail - - - - - - -

Back to Fetchmail Home Page -

To Site Map -

$Date: 2002/07/28 09:22:19 $ -

Design Notes On Fetchmail

- -

These notes are for the benefit of future hackers and maintainers. -The following sections are both functional and narrative, read from -beginning to end.

- -

History

- -

A direct ancestor of the fetchmail program was originally authored -(under the name popclient) by Carl Harris <ceharris@mal.com>. I -took over development in June 1996 and subsequently renamed the -program `fetchmail' to reflect the addition of IMAP support and SMTP -delivery. In early November 1996 Carl officially ended support for -the last popclient versions.

- -

Before accepting responsibility for the popclient sources from Carl, I -had investigated and used and tinkered with every other UNIX -remote-mail forwarder I could find, including fetchpop1.9, + + + +Design notes on fetchmail + + + + + + + + + + + + +
Back to Fetchmail Home Page To Site Map $Date: 2002/07/28 09:23:04 $
+ +

Design Notes On Fetchmail

+ +

These notes are for the benefit of future hackers and +maintainers. The following sections are both functional and +narrative, read from beginning to end.

+ +

History

+ +

A direct ancestor of the fetchmail program was originally +authored (under the name popclient) by Carl Harris +<ceharris@mal.com>. I took over development in June 1996 and +subsequently renamed the program `fetchmail' to reflect the +addition of IMAP support and SMTP delivery. In early November 1996 +Carl officially ended support for the last popclient versions.

+ +

Before accepting responsibility for the popclient sources from +Carl, I had investigated and used and tinkered with every other +UNIX remote-mail forwarder I could find, including fetchpop1.9, PopTart-0.9.3, get-mail, gwpop, pimp-1.0, pop-perl5-1.2, popc, -popmail-1.6 and upop. My major goal was to get a header-rewrite +popmail-1.6 and upop. My major goal was to get a header-rewrite feature like fetchmail's working so I wouldn't have reply problems anymore.

Despite having done a good bit of work on fetchpop1.9, when I found -popclient I quickly concluded that it offered the solidest base for -future development. I was convinced of this primarily by the presence -of multiple-protocol support. The competition didn't do -POP2/RPOP/APOP, and I was already having vague thoughts of maybe -adding IMAP. (This would advance two other goals: learn IMAP and get -comfortable writing TCP/IP client software.)

- -

Until popclient 3.05 I was simply following out the implications of -Carl's basic design. He already had daemon.c in the distribution, -and I wanted daemon mode almost as badly as I wanted the header -rewrite feature. The other things I added were bug fixes or -minor extensions.

- -

After 3.1, when I put in SMTP-forwarding support (more about this -below) the nature of the project changed -- it became a -carefully-thought-out attempt to render obsolete every other program -in its class. The name change quickly followed.

- -

The rewrite option

- -

MTAs ought to canonicalize the addresses of outgoing non-local mail so -that From:, To:, Cc:, Bcc: and other address headers contain only -fully qualified domain names. Failure to do so can break the reply -function on many mailers. (Sendmail has an option to do this.)

Despite having done a good bit of work on fetchpop1.9, when I +found popclient I quickly concluded that it offered the solidest +base for future development. I was convinced of this primarily by +the presence of multiple-protocol support. The competition didn't +do POP2/RPOP/APOP, and I was already having vague thoughts of maybe +adding IMAP. (This would advance two other goals: learn IMAP and +get comfortable writing TCP/IP client software.)

+ +

Until popclient 3.05 I was simply following out the implications +of Carl's basic design. He already had daemon.c in the +distribution, and I wanted daemon mode almost as badly as I wanted +the header rewrite feature. The other things I added were bug fixes +or minor extensions.

+ +

After 3.1, when I put in SMTP-forwarding support (more about +this below) the nature of the project changed -- it became a +carefully-thought-out attempt to render obsolete every other +program in its class. The name change quickly followed.

+ +

The rewrite option

+ +

MTAs ought to canonicalize the addresses of outgoing non-local +mail so that From:, To:, Cc:, Bcc: and other address headers +contain only fully qualified domain names. Failure to do so can +break the reply function on many mailers. (Sendmail has an option +to do this.)

This problem only becomes obvious when a reply is generated on a -machine different from where the message was delivered. The -two machines will have different local username spaces, potentially +machine different from where the message was delivered. The two +machines will have different local username spaces, potentially leading to misrouted mail.

Most MTAs (and sendmail in particular) do not canonicalize address headers -in this way (violating RFC 1123). Fetchmail therefore has to do it. This -is the first feature I added to the ancestral popclient.

Most MTAs (and sendmail in particular) do not canonicalize +address headers in this way (violating RFC 1123). Fetchmail +therefore has to do it. This is the first feature I added to the +ancestral popclient.

Reorganization

The second thing I did reorganize and simplify popclient a lot. Carl -Harris's implementation was very sound, but exhibited a kind of -unnecessary complexity common to many C programmers. He treated the -code as central and the data structures as support for the code. As a -result, the code was beautiful but the data structure design ad-hoc -and rather ugly (at least to this old LISP hacker).

The second thing I did reorganize and simplify popclient a lot. +Carl Harris's implementation was very sound, but exhibited a kind +of unnecessary complexity common to many C programmers. He treated +the code as central and the data structures as support for the +code. As a result, the code was beautiful but the data structure +design ad-hoc and rather ugly (at least to this old LISP +hacker).

I was able to improve matters significantly by reorganizing most of the -program around the `query' data structure and eliminating a bunch of -global context. This especially simplified the main sequence in -fetchmail.c and was critical in enabling the daemon mode changes.

I was able to improve matters significantly by reorganizing most +of the program around the `query' data structure and eliminating a +bunch of global context. This especially simplified the main +sequence in fetchmail.c and was critical in enabling the daemon +mode changes.

IMAP support and the method table

The next step was IMAP support. I initially wrote the IMAP code -as a generic query driver and a method table. The idea was to have +

The next step was IMAP support. I initially wrote the IMAP code +as a generic query driver and a method table. The idea was to have all the protocol-independent setup logic and flow of control in the driver, and the protocol-specific stuff in the method table.

Once this worked, I rewrote the POP3 code to use the same organization. -The POP2 code kept its own driver for a couple more releases, until -I found sources of a POP2 server to test against (the breed seems -to be nearly extinct).

- -

The purpose of this reorganization, of course, is to trivialize -the development of support for future protocols as much as possible. -All mail-retrieval protocols have to have pretty similar logical -design by the nature of the task. By abstracting out that common -logic and its interface to the rest of the program, both the common -and protocol-specific parts become easier to understand.

- -

Furthermore, many kinds of new features can instantly be supported -across all protocols by modifying the one driver module.

- -

Implications of smtp forwarding

- -

The direction of the project changed radically when Harry Hochheiser -sent me his scratch code for forwarding fetched mail to the SMTP port. -I realized almost immediately that a reliable implementation of this -feature would make all the other delivery modes obsolete.

- -

Why mess with all the complexity of configuring an MDA or setting up -lock-and-append on a mailbox when port 25 is guaranteed to be there on -any platform with TCP/IP support in the first place? Especially when -this means retrieved mail is guaranteed to look like normal sender- -initiated SMTP mail, which is really what we want anyway.

- -

Clearly, the right thing to do was (1) hack SMTP forwarding support -into the generic driver, (2) make it the default mode, and (3) eventually -throw out all the other delivery modes.

- -

I hesitated over step 3 for some time, fearing to upset long-time -popclient users dependent on the alternate delivery mechanisms. In -theory, they could immediately switch to .forward files or their -non-sendmail equivalents to get the same effects. In practice the -transition might have been messy.

- -

But when I did it (see the NEWS note on the great options massacre) -the benefits proved huge. The cruftiest parts of the driver code -vanished. Configuration got radically simpler -- no more grovelling -around for the system MDA and user's mailbox, no more worries about -whether the underlying OS supports file locking.

- -

Also, the only way to lose mail vanished. If you specified localfolder -and the disk got full, your mail got lost. This can't happen with -SMTP forwarding because your SMTP listener won't return OK unless -the message can be spooled or processed.

- -

Also, performance improved (though not so you'd notice it in a single -run). Another not insignificant benefit of this change was that the -manual page got a lot simpler.

- -

Later, I had to bring --mda back in order to allow handling of some -obscure situations involving dynamic SLIP. But I found a much simpler -way to do it.

- -

The moral? Don't hesitate to throw away superannuated features when -you can do it without loss of effectiveness. I tanked a couple I'd -added myself and have no regrets at all. As Saint-Exupery said, -"Perfection [in design] is achieved not when there is nothing more to -add, but rather when there is nothing more to take away." This +

Once this worked, I rewrote the POP3 code to use the same +organization. The POP2 code kept its own driver for a couple more +releases, until I found sources of a POP2 server to test against +(the breed seems to be nearly extinct).

+ +

The purpose of this reorganization, of course, is to trivialize +the development of support for future protocols as much as +possible. All mail-retrieval protocols have to have pretty similar +logical design by the nature of the task. By abstracting out that +common logic and its interface to the rest of the program, both the +common and protocol-specific parts become easier to understand.

+ +

Furthermore, many kinds of new features can instantly be +supported across all protocols by modifying the one driver +module.

+ +

Implications of smtp forwarding

+ +

The direction of the project changed radically when Harry +Hochheiser sent me his scratch code for forwarding fetched mail to +the SMTP port. I realized almost immediately that a reliable +implementation of this feature would make all the other delivery +modes obsolete.

+ +

Why mess with all the complexity of configuring an MDA or +setting up lock-and-append on a mailbox when port 25 is guaranteed +to be there on any platform with TCP/IP support in the first place? +Especially when this means retrieved mail is guaranteed to look +like normal sender- initiated SMTP mail, which is really what we +want anyway.

+ +

Clearly, the right thing to do was (1) hack SMTP forwarding +support into the generic driver, (2) make it the default mode, and +(3) eventually throw out all the other delivery modes.

+ +

I hesitated over step 3 for some time, fearing to upset +long-time popclient users dependent on the alternate delivery +mechanisms. In theory, they could immediately switch to .forward +files or their non-sendmail equivalents to get the same effects. In +practice the transition might have been messy.

+ +

But when I did it (see the NEWS note on the great options +massacre) the benefits proved huge. The cruftiest parts of the +driver code vanished. Configuration got radically simpler -- no +more grovelling around for the system MDA and user's mailbox, no +more worries about whether the underlying OS supports file +locking.

+ +

Also, the only way to lose mail vanished. If you specified +localfolder and the disk got full, your mail got lost. This can't +happen with SMTP forwarding because your SMTP listener won't return +OK unless the message can be spooled or processed.

+ +

Also, performance improved (though not so you'd notice it in a +single run). Another not insignificant benefit of this change was +that the manual page got a lot simpler.

+ +

Later, I had to bring --mda back in order to allow handling of +some obscure situations involving dynamic SLIP. But I found a much +simpler way to do it.

+ +

The moral? Don't hesitate to throw away superannuated features +when you can do it without loss of effectiveness. I tanked a couple +I'd added myself and have no regrets at all. As Saint-Exupery said, +"Perfection [in design] is achieved not when there is nothing more +to add, but rather when there is nothing more to take away." This program isn't perfect, but it's trying.

The most-requested features that I will never add, and why not:

The most-requested features that I will never add, and why +not:

Password encryption in .fetchmailrc

The reason there's no facility to store passwords encrypted in the -.fetchmailrc file is because this doesn't actually add protection.

The reason there's no facility to store passwords encrypted in +the .fetchmailrc file is because this doesn't actually add +protection.

Anyone who's acquired the 0600 permissions needed to read your -.fetchmailrc file will be able to run fetchmail as you anyway -- and -if it's your password they're after, they'd be able to rip the +.fetchmailrc file will be able to run fetchmail as you anyway -- +and if it's your password they're after, they'd be able to rip the necessary decoder out of the fetchmail code itself to get it.

All .fetchmailrc encryption would do is give a false sense of security to people who don't think very hard.

Truly concurrent queries to multiple hosts

Occasionally I get a request for this on "efficiency" grounds. These -people aren't thinking either. True concurrency would do nothing to lessen -fetchmail's total IP volume. The best it could possibly do is change the -usage profile to shorten the duration of the active part of a poll cycle -at the cost of increasing its demand on IP volume per unit time.

Occasionally I get a request for this on "efficiency" grounds. +These people aren't thinking either. True concurrency would do +nothing to lessen fetchmail's total IP volume. The best it could +possibly do is change the usage profile to shorten the duration of +the active part of a poll cycle at the cost of increasing its +demand on IP volume per unit time.

If one could thread the protocol code so that fetchmail didn't block -on waiting for a protocol response, but rather switched to trying to -process another host query, one might get an efficiency gain (close to -constant loading at the single-host level).

If one could thread the protocol code so that fetchmail didn't +block on waiting for a protocol response, but rather switched to +trying to process another host query, one might get an efficiency +gain (close to constant loading at the single-host level).

Fortunately, I've only seldom seen a server that incurred significant -wait time on an individual response. I judge the gain from this not -worth the hideous complexity increase it would require in the code.

Fortunately, I've only seldom seen a server that incurred +significant wait time on an individual response. I judge the gain +from this not worth the hideous complexity increase it would +require in the code.

Multiple concurrent instances of fetchmail

Fetchmail locking is on a per-invoking-user because finer-grained -locks would be really hard to implement in a portable way. The -problem is that you don't want two fetchmails querying the same site -for the same remote user at the same time.

Fetchmail locking is on a per-invoking-user because +finer-grained locks would be really hard to implement in a portable +way. The problem is that you don't want two fetchmails querying the +same site for the same remote user at the same time.

To handle this optimally, multiple fetchmails would have to associate -a system-wide semaphore with each active pair of a remote user and -host canonical address. A fetchmail would have to block until getting -this semaphore at the start of a query, and release it at the end of a -query.

To handle this optimally, multiple fetchmails would have to +associate a system-wide semaphore with each active pair of a remote +user and host canonical address. A fetchmail would have to block +until getting this semaphore at the start of a query, and release +it at the end of a query.

This would be way too complicated to do just for an "it might be nice" -feature. Instead, you can run a single root fetchmail polling for -multiple users in either single-drop or multidrop mode.

This would be way too complicated to do just for an "it might be +nice" feature. Instead, you can run a single root fetchmail polling +for multiple users in either single-drop or multidrop mode.

The fundamental problem here is how an instance of fetchmail polling -host foo can assert that it's doing so in a way visible to all other -fetchmails. System V semaphores would be ideal for this purpose, but -they're not portable.

The fundamental problem here is how an instance of fetchmail +polling host foo can assert that it's doing so in a way visible to +all other fetchmails. System V semaphores would be ideal for this +purpose, but they're not portable.

I've thought about this a lot and roughed up several designs. All are -complicated and fragile, with a bunch of the standard problems (what -happens if a fetchmail aborts before clearing its semaphore, and how -do we recover reliably?).

I've thought about this a lot and roughed up several designs. +All are complicated and fragile, with a bunch of the standard +problems (what happens if a fetchmail aborts before clearing its +semaphore, and how do we recover reliably?).

I'm just not satisfied that there's enough functional gain here to pay -for the large increase in complexity that adding these semaphores -would entail.

I'm just not satisfied that there's enough functional gain here +to pay for the large increase in complexity that adding these +semaphores would entail.

Multidrop and alias handling

I decided to add the multidrop support partly because some users were -clamoring for it, but mostly because I thought it would shake bugs out -of the single-drop code by forcing me to deal with addressing in full -generality. And so it proved.

I decided to add the multidrop support partly because some users +were clamoring for it, but mostly because I thought it would shake +bugs out of the single-drop code by forcing me to deal with +addressing in full generality. And so it proved.

There are two important aspects of the features for handling -multiple-drop aliases and mailing lists which future hackers should be -careful to preserve.

- -

-
The logic path for single-recipient mailboxes doesn't involve header - parsing or DNS lookups at all. This is important -- it means the code - for the most common case can be much simpler and more robust.
- -
-
The multidrop handing does not rely on doing the equivalent of - passing the message to sendmail -oem -t. Instead, it explicitly mines - members of a specified set of local usernames out of the header.
- -
-
We do not attempt delivery to multidrop mailboxes in the presence - of DNS errors. Before each multidrop poll we probe DNS to see if we have a - nameserver handy. If not, the poll is skipped. If DNS crashes during a - poll, the error return from the next nameserver lookup aborts message - delivery and ends the poll. The daemon mode will then quietly spin until - DNS comes up again, at which point it will resume delivering mail.
-

- -

When I designed this support, I was terrified of doing anything that could -conceivably cause a mail loop (you should be too). That's why the code -as written can only append local names (never @-addresses) to the -recipients list.

- -

The code in mxget.c is nasty, no two ways about it. But it's utterly -necessary, there are a lot of MX pointers out there. It really ought -to be a (documented!) entry point in the bind library.

- -

DNS error handling

+multiple-drop aliases and mailing lists which future hackers should +be careful to preserve.

+ +

+
The logic path for single-recipient mailboxes doesn't involve +header parsing or DNS lookups at all. This is important -- it means +the code for the most common case can be much simpler and more +robust.
+
+
The multidrop handing does not rely on doing the +equivalent of passing the message to sendmail -oem -t. Instead, it +explicitly mines members of a specified set of local usernames out +of the header.
+
+
We do not attempt delivery to multidrop mailboxes in +the presence of DNS errors. Before each multidrop poll we probe DNS +to see if we have a nameserver handy. If not, the poll is skipped. +If DNS crashes during a poll, the error return from the next +nameserver lookup aborts message delivery and ends the poll. The +daemon mode will then quietly spin until DNS comes up again, at +which point it will resume delivering mail.
+

+ +

When I designed this support, I was terrified of doing anything +that could conceivably cause a mail loop (you should be too). +That's why the code as written can only append local names +(never @-addresses) to the recipients list.

+ +

The code in mxget.c is nasty, no two ways about it. But it's +utterly necessary, there are a lot of MX pointers out there. It +really ought to be a (documented!) entry point in the bind +library.

+ +

DNS error handling

Fetchmail's behavior on DNS errors is to suppress forwarding and deletion of the individual message that each occurs in, leaving it -queued on the server for retrieval on a subsequent poll. The -assumption is that DNS errors are transient, due to temporary server -outages.

- -

Unfortunately this means that if a DNS error is permanent a message -can be perpetually stuck in the server mailbox. We've had a couple -bug reports of this kind due to subtle RFC822 parsing errors in the fetchmail -code that resulted in impossible things getting passed to the DNS lookup -routines.

- -

Alternative ways to handle the problem: ignore DNS errors (treating -them as a non-match on the mailserver domain), or forward messages -with errors to fetchmail's invoking user in addition to any other -recipients. These would fit an assumption that DNS lookup errors are -likely to be permanent problems associated with an address.

- -

IPv6 and IPSEC

- -

The IPv6 support patches are really more protocol-family independence -patches. Because of this, in most places, "ports" (numbers) have been -replaced with "services" (strings, that may be digits). This allows us -to run with certain protocols that use strings as "service names" -where we in the IP world think of port numbers. Someday we'll plumb -strings all over and then, if inet6 is not enabled, do a -getservbyname() down in SocketOpen. The IPv6 support patches use -getaddrinfo(), which is a POSIX p1003.1g mandated function. So, in the -not too distant future, we'll zap the ifdefs and just let autoconf -check for getaddrinfo. IPv6 support comes pretty much automatically -once you have protocol family independence.

- -

Internationalization

+queued on the server for retrieval on a subsequent poll. The +assumption is that DNS errors are transient, due to temporary +server outages.

+ +

Unfortunately this means that if a DNS error is permanent a +message can be perpetually stuck in the server mailbox. We've had a +couple bug reports of this kind due to subtle RFC822 parsing errors +in the fetchmail code that resulted in impossible things getting +passed to the DNS lookup routines.

+ +

Alternative ways to handle the problem: ignore DNS errors +(treating them as a non-match on the mailserver domain), or forward +messages with errors to fetchmail's invoking user in addition to +any other recipients. These would fit an assumption that DNS lookup +errors are likely to be permanent problems associated with an +address.

+ +

IPv6 and IPSEC

+ +

The IPv6 support patches are really more protocol-family +independence patches. Because of this, in most places, "ports" +(numbers) have been replaced with "services" (strings, that may be +digits). This allows us to run with certain protocols that use +strings as "service names" where we in the IP world think of port +numbers. Someday we'll plumb strings all over and then, if inet6 is +not enabled, do a getservbyname() down in SocketOpen. The IPv6 +support patches use getaddrinfo(), which is a POSIX p1003.1g +mandated function. So, in the not too distant future, we'll zap the +ifdefs and just let autoconf check for getaddrinfo. IPv6 support +comes pretty much automatically once you have protocol family +independence.

+ +

Internationalization

Internationalization is handled using GNU gettext (see the file -ABOUT_NLS in the source distribution). This places some -minor constraints on the code.

+ABOUT_NLS in the source distribution). This places some minor +constraints on the code.

Strings that must be subject to translation should be wrapped with GT_() -or N_() -- the former in function arguments, the latter in static -initializers and other non-function-argument contexts.

Strings that must be subject to translation should be wrapped +with GT_() or N_() -- the former in function arguments, the latter +in static initializers and other non-function-argument +contexts.

Checklist for Adding Options

Adding a control option is not complicated in principle, but there are -a lot of fiddly details in the process. You'll need to do the -following minimum steps.

Adding a control option is not complicated in principle, but +there are a lot of fiddly details in the process. You'll need to do +the following minimum steps.

Add a field to represent the control in struct run, - struct query, or struct hostdata. +
- Add a field to represent the control in struct +run, struct query, or struct +hostdata.
- Go to rcfile_y.y. Add the token to the grammar. Don't - forget the %token declaration. +
- Go to rcfile_y.y. Add the token to the grammar. +Don't forget the %token declaration.
- Pick an actual string to declare the option in the .fetchmailrc file. Add - the token to rcfile_l. +
- Pick an actual string to declare the option in the .fetchmailrc +file. Add the token to rcfile_l.
- Pick a long-form option name, and a one-letter short option if any - are left. Go to options.c. Pick a new LA_ - value. Hack the longoptions table to set up the - association. Hack the big switch statement to set the option. - Hack the `?' message to describe it. +
- Pick a long-form option name, and a one-letter short option if +any are left. Go to options.c. Pick a new +LA_ value. Hack the longoptions table to +set up the association. Hack the big switch statement to set the +option. Hack the `?' message to describe it.
- If the default is nonzero, set it in def_opts near the top of - load_params in fetchmail.c. +
- If the default is nonzero, set it in def_opts near +the top of load_params in +fetchmail.c.
- Add code to dump the option value in fetchmail.c:dump_params. +
- Add code to dump the option value in +fetchmail.c:dump_params.
- For a per-site or per-user option, add proper - FLAG_MERGE actions in fetchmail.c's optmerge() - function. For a global option, add an override at the end of - load_params; this will involve copying a "cmd_run." field to a - corresponding "run." field, see the existing code for models. +
- For a per-site or per-user option, add proper +FLAG_MERGE actions in fetchmail.c's optmerge() +function. For a global option, add an override at the end of +load_params; this will involve copying a "cmd_run." field to a +corresponding "run." field, see the existing code for models.
- Document the option in fetchmail.man. This will require at least - two changes; one to the collected table of options, and one full - text description of the option. +
- Document the option in fetchmail.man. This will require at +least two changes; one to the collected table of options, and one +full text description of the option.
- Hack fetchmailconf to configure it. Bump the fetchmailconf version. +
- Hack fetchmailconf to configure it. Bump the fetchmailconf +version.
- Hack conf.c to dump the option so we won't have a version-skew problem. +
- Hack conf.c to dump the option so we won't have a version-skew +problem.
- Add an entry to NEWS. +
- Add an entry to NEWS.
- If the option implements a new feature, add a note to the feature list. -
+
If the option implements a new feature, add a note to the +feature list.

There may be other things you have to do in the way of logic, of course.

There may be other things you have to do in the way of logic, of +course.

Before you implement an option, though, think hard. Is there any way -to make fetchmail automatically detect the circumstances under which -it should change its behavior? If so, don't write an option. Just do -the check!

Before you implement an option, though, think hard. Is there any +way to make fetchmail automatically detect the circumstances under +which it should change its behavior? If so, don't write an option. +Just do the check!

Lessons learned

1. Server-side state is essential

The person(s) responsible for removing LAST from POP3 deserve to suffer. -Without it, a client has no way to know which messages in a box have been -read by other means, such as an MUA running on the server.

The person(s) responsible for removing LAST from POP3 deserve to +suffer. Without it, a client has no way to know which messages in a +box have been read by other means, such as an MUA running on the +server.

The POP3 UID feature described in RFC1725 to replace LAST is -insufficient. The only problem it solves is tracking which messages -have been read by this client -- and even that requires +insufficient. The only problem it solves is tracking which messages +have been read by this client -- and even that requires tricky, fragile implementation.

The underlying lesson is that maintaining accessible server-side -`seen' state bits associated with Status headers is indispensible in a -Unix/RFC822 mail server protocol. IMAP gets this right.

+`seen' state bits associated with Status headers is indispensible +in a Unix/RFC822 mail server protocol. IMAP gets this right.

2. Readable text protocol transactions are a Good Thing

A nice thing about the general class of text-based protocols that SMTP, -POP2, POP3, and IMAP belongs to is that client/server transactions are -easy to watch and transaction code correspondingly easy to debug. Given -a decent layer of socket utility functions (which Carl provided) it's -easy to write protocol engines and not hard to show that they're working -correctly.

A nice thing about the general class of text-based protocols +that SMTP, POP2, POP3, and IMAP belongs to is that client/server +transactions are easy to watch and transaction code correspondingly +easy to debug. Given a decent layer of socket utility functions +(which Carl provided) it's easy to write protocol engines and not +hard to show that they're working correctly.

This is an advantage not to be despised! Because of it, this project has -been interesting and fun -- no serious or persistent bugs, no long -hours spent looking for subtle pathologies.

This is an advantage not to be despised! Because of it, this +project has been interesting and fun -- no serious or persistent +bugs, no long hours spent looking for subtle pathologies.

3. IMAP is a Good Thing.

Now that there is a standard IMAP equivalent of the POP3 APOP validation -in CRAM-MD5, POP3 is completely obsolete.

Now that there is a standard IMAP equivalent of the POP3 APOP +validation in CRAM-MD5, POP3 is completely obsolete.

4. SMTP is the Right Thing

In retrospect it seems clear that this program (and others like it) -should have been designed to forward via SMTP from the beginning. -This lesson may be applicable to other Unix programs that now call the -local MDA/MTA as a program.

In retrospect it seems clear that this program (and others like +it) should have been designed to forward via SMTP from the +beginning. This lesson may be applicable to other Unix programs +that now call the local MDA/MTA as a program.

5. Syntactic noise can be your friend

The optional `noise' keywords in the rc file syntax started out as -a late-night experiment. The English-like syntax they allow is +

The optional `noise' keywords in the rc file syntax started out +as a late-night experiment. The English-like syntax they allow is considerably more readable than the traditional terse keyword-value -pairs you get when you strip them all out. I think there may be a +pairs you get when you strip them all out. I think there may be a wider lesson here.

Motivation and validation

It is truly written: the best hacks start out as personal solutions to -the author's everyday problems, and spread because the problem turns -out to be typical for a large class of users. So it was with Carl Harris -and the ancestral popclient, and so with me and fetchmail.

It is truly written: the best hacks start out as personal +solutions to the author's everyday problems, and spread because the +problem turns out to be typical for a large class of users. So it +was with Carl Harris and the ancestral popclient, and so with me +and fetchmail.

It's gratifying that fetchmail has become so popular. Until just before -1.9 I was designing strictly to my own taste. The multi-drop mailbox -support and the new --limit option were the first features to go in that -I didn't need myself.

It's gratifying that fetchmail has become so popular. Until just +before 1.9 I was designing strictly to my own taste. The multi-drop +mailbox support and the new --limit option were the first features +to go in that I didn't need myself.

By 1.9, four months after I started hacking on popclient and a month -after the first fetchmail release, there were literally a hundred -people on the fetchmail-friends contact list. That's pretty powerful -motivation. And they were a good crowd, too, sending fixes and -intelligent bug reports in volume. A user population like that is -a gift from the gods, and this is my expression of gratitude.

By 1.9, four months after I started hacking on popclient and a +month after the first fetchmail release, there were literally a +hundred people on the fetchmail-friends contact list. That's pretty +powerful motivation. And they were a good crowd, too, sending fixes +and intelligent bug reports in volume. A user population like that +is a gift from the gods, and this is my expression of +gratitude.

The beta testers didn't know it at the time, but they were also the -subjects of a sociological experiment. The results are described in -my paper, The Cathedral -And The Bazaar.

The beta testers didn't know it at the time, but they were also +the subjects of a sociological experiment. The results are +described in my paper, The +Cathedral And The Bazaar.

Credits

Special thanks go to Carl Harris, who built a good solid code base -and then tolerated me hacking it out of recognition. And to Harry -Hochheiser, who gave me the idea of the SMTP-forwarding delivery mode.

Special thanks go to Carl Harris, who built a good solid code +base and then tolerated me hacking it out of recognition. And to +Harry Hochheiser, who gave me the idea of the SMTP-forwarding +delivery mode.

Other significant contributors to the code have included Dave Bodenstab -(error.c code and --syslog), George Sipe (--monitor and --interface), -Gordon Matzigkeit (netrc.c), Al Longyear (UIDL support), Chris -Hanson (Kerberos V4 support), and Craig Metz (OPIE, IPv6, IPSEC).

Other significant contributors to the code have included Dave +Bodenstab (error.c code and --syslog), George Sipe (--monitor and +--interface), Gordon Matzigkeit (netrc.c), Al Longyear (UIDL +support), Chris Hanson (Kerberos V4 support), and Craig Metz (OPIE, +IPv6, IPSEC).

Conclusion

At this point, the fetchmail code appears to be pretty stable. -It will probably undergo substantial change only if and when support -for a new retrieval protocol or authentication method is added.

- -

Relevant RFCS

- -

Not all of these describe standards explicitly used in fetchmail, but they -all shaped the design in one way or another.

- -

RFC821 -: SMTP protocol -
RFC822 -: Mail header format -
RFC937 -: Post Office Protocol - Version 2 -
RFC974 -: MX routing -
RFC976 -: UUCP mail format -
RFC1081 -: Post Office Protocol - Version 3 -
RFC1123 -: Host requirements (modifies 821, 822, and 974) -
RFC1176 -: Interactive Mail Access Protocol - Version 2 -
RFC1203 -: Interactive Mail Access Protocol - Version 3 -
RFC1225 -: Post Office Protocol - Version 3 -
RFC1344 -: Implications of MIME for Internet Mail Gateways -
RFC1413 -: Identification server -
RFC1428 -: Transition of Internet Mail from Just-Send-8 to 8-bit SMTP/MIME -
RFC1460 -: Post Office Protocol - Version 3 -
RFC1508 -: Generic Security Service Application Program Interface -
RFC1521 -: MIME: Multipurpose Internet Mail Extensions -
RFC1869 -: SMTP Service Extensions (ESMTP spec) -
RFC1652 -: SMTP Service Extension for 8bit-MIMEtransport -
RFC1725 -: Post Office Protocol - Version 3 -
RFC1730 -: Interactive Mail Access Protocol - Version 4 -
RFC1731 -: IMAP4 Authentication Mechanisms -
RFC1732 -: IMAP4 Compatibility With IMAP2 And IMAP2bis -
RFC1734 -: POP3 AUTHentication command -
RFC1870 -: SMTP Service Extension for Message Size Declaration -
RFC1891 -: SMTP Service Extension for Delivery Status Notifications -
RFC1892 -: The Multipart/Report Content Type for the Reporting of Mail System Administrative Messages -
RFC1894 -: An Extensible Message Format for Delivery Status Notifications -
RFC1893 -: Enhanced Mail System Status Codes -
RFC1894 -: An Extensible Message Format for Delivery Status Notifications -
RFC1938 -: A One-Time Password System -
RFC1939 -: Post Office Protocol - Version 3 -
RFC1957 -: Some Observations on Implementations of the Post Office Protocol (POP3) -
RFC1985 -: SMTP Service Extension for Remote Message Queue Starting -
RFC2033 -: Local Mail Transfer Protocol -
RFC2060 -: Internet Message Access Protocol - Version 4rev1 -
RFC2061 -: IMAP4 Compatibility With IMAP2bis -
RFC2062 -: Internet Message Access Protocol - Obsolete Syntax -
RFC2195 -: IMAP/POP AUTHorize Extension for Simple Challenge/Response -
RFC2177 -: IMAP IDLE command -
RFC2449 -: POP3 Extension Mechanism -
RFC2554 -: SMTP Service Extension for Authentication -
RFC2595 -: Using TLS with IMAP, POP3 and ACAP -
RFC2645 -: On-Demand Mail Relay: SMTP with Dynamic IP Addresses -
RFC2683 -: IMAP4 Implementation Recommendations -
RFC2821 -: Simple Mail Transfer Protocol -
RFC2822 -: Internet Message Format -

+It will probably undergo substantial change only if and when +support for a new retrieval protocol or authentication method is +added.

+ +

Relevant RFCS

+ +

Not all of these describe standards explicitly used in +fetchmail, but they all shaped the design in one way or +another.

+ +

RFC821: SMTP protocol
RFC822: Mail header format
RFC937: Post Office Protocol - Version 2
RFC974: MX routing
RFC976: UUCP mail format
RFC1081: Post Office Protocol - Version 3
RFC1123: Host requirements (modifies 821, 822, and 974)
RFC1176: Interactive Mail Access Protocol - Version 2
RFC1203: Interactive Mail Access Protocol - Version 3
RFC1225: Post Office Protocol - Version 3
RFC1344: Implications of MIME for Internet Mail Gateways
RFC1413: Identification server
RFC1428: Transition of Internet Mail from Just-Send-8 to 8-bit +SMTP/MIME
RFC1460: Post Office Protocol - Version 3
RFC1508: Generic Security Service Application Program Interface
RFC1521: MIME: Multipurpose Internet Mail Extensions
RFC1869: SMTP Service Extensions (ESMTP spec)
RFC1652: SMTP Service Extension for 8bit-MIMEtransport
RFC1725: Post Office Protocol - Version 3
RFC1730: Interactive Mail Access Protocol - Version 4
RFC1731: IMAP4 Authentication Mechanisms
RFC1732: IMAP4 Compatibility With IMAP2 And IMAP2bis
RFC1734: POP3 AUTHentication command
RFC1870: SMTP Service Extension for Message Size Declaration
RFC1891: SMTP Service Extension for Delivery Status Notifications
RFC1892: The Multipart/Report Content Type for the Reporting of Mail +System Administrative Messages
RFC1894: An Extensible Message Format for Delivery Status +Notifications
RFC1893: Enhanced Mail System Status Codes
RFC1894: An Extensible Message Format for Delivery Status +Notifications
RFC1938: A One-Time Password System
RFC1939: Post Office Protocol - Version 3
RFC1957: Some Observations on Implementations of the Post Office +Protocol (POP3)
RFC1985: SMTP Service Extension for Remote Message Queue Starting
RFC2033: Local Mail Transfer Protocol
RFC2060: Internet Message Access Protocol - Version 4rev1
RFC2061: IMAP4 Compatibility With IMAP2bis
RFC2062: Internet Message Access Protocol - Obsolete Syntax
RFC2195: IMAP/POP AUTHorize Extension for Simple Challenge/Response
RFC2177: IMAP IDLE command
RFC2449: POP3 Extension Mechanism
RFC2554: SMTP Service Extension for Authentication
RFC2595: Using TLS with IMAP, POP3 and ACAP
RFC2645: On-Demand Mail Relay: SMTP with Dynamic IP Addresses
RFC2683: IMAP4 Implementation Recommendations
RFC2821: Simple Mail Transfer Protocol
RFC2822: Internet Message Format

+ +

+ + + + + + +

Back to Fetchmail Home Page

To Site Map

$Date: 2002/07/28 09:23:04 $

+ +
+

Eric S. Raymond <esr@snark.thyrsus.com>

+ + -

- -

Back to Fetchmail Home Page -

To Site Map -

$Date: 2002/07/28 09:22:19 $ -

- -
-

Eric S. Raymond <esr@snark.thyrsus.com>

- - -- cgit v1.2.3