diff options
Diffstat (limited to 'po/zh_CN.po')
| -rw-r--r-- | po/zh_CN.po | 2948 |
1 files changed, 2948 insertions, 0 deletions
diff --git a/po/zh_CN.po b/po/zh_CN.po new file mode 100644 index 00000000..76421a7c --- /dev/null +++ b/po/zh_CN.po @@ -0,0 +1,2948 @@ +# Chinese translations for fetchmail package +# fetchmail 软件包的简体中文翻译. +# Copyright (C) 2008 Eric S. Raymond (msgids) +# This file is distributed under the same license as the fetchmail package. +# Ji ZhengYu <zhengyuji@gmail.com>, 2008. +# +msgid "" +msgstr "" +"Project-Id-Version: fetchmail 6.3.8\n" +"Report-Msgid-Bugs-To: fetchmail-devel@lists.berlios.de\n" +"POT-Creation-Date: 2007-03-30 09:56+0200\n" +"PO-Revision-Date: 2008-02-23 15:37+0800\n" +"Last-Translator: Ji ZhengYu <zhengyuji@gmail.com>\n" +"Language-Team: Chinese (simplified) <translation-team-zh-cn@lists.sourceforge.net>\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=1; plural=0;\n" + +#: checkalias.c:174 +#, c-format +msgid "Checking if %s is really the same node as %s\n" +msgstr "正在检查 %s 是否与节点 %s 一致\n" + +#: checkalias.c:178 +msgid "Yes, their IP addresses match\n" +msgstr "正确，它们的 IP 地址相同\n" + +#: checkalias.c:182 +msgid "No, their IP addresses don't match\n" +msgstr "错误，它们的 IP 地址不同\n" + +#: checkalias.c:198 +#, c-format +msgid "nameserver failure while looking for '%s' during poll of %s: %s\n" +msgstr "收取 %2$s 中邮件并查找 ‘%1$s’ 时 nameserver 出错: %3$s\n" + +#: checkalias.c:223 +#, c-format +msgid "nameserver failure while looking for `%s' during poll of %s.\n" +msgstr "收取 %2$s 中邮件并查找 ‘%1$s’ 时 nameserver 出错。\n" + +#: cram.c:95 +msgid "could not decode BASE64 challenge\n" +msgstr "无法解析 BASE64 编码请求\n" + +#: cram.c:103 +#, c-format +msgid "decoded as %s\n" +msgstr "以 %s 解码\n" + +#: driver.c:191 +#, c-format +msgid "kerberos error %s\n" +msgstr "kerberos 认证系统出错 %s\n" + +#: driver.c:249 driver.c:254 +#, c-format +msgid "krb5_sendauth: %s [server says '%*s'] \n" +msgstr "krb5_sendauth: %s [ 服务器请求 ‘%*s’]\n" + +#: driver.c:335 +msgid "Subject: Fetchmail oversized-messages warning" +msgstr "主题: Fetchmail 超大邮件警告" + +#: driver.c:339 +#, c-format +msgid "The following oversized messages were deleted on server %s account %s:" +msgstr "以下超大邮件从服务器 %s 上删除，帐号为 %s:" + +#: driver.c:343 +#, c-format +msgid "The following oversized messages remain on server %s account %s:" +msgstr "以下超大邮件留在了服务器 %s 上，帐号为 %s:" + +#: driver.c:362 +#, c-format +msgid " %d message %d octets long deleted by fetchmail." +msgid_plural " %d messages %d octets long deleted by fetchmail." +msgstr[0] "fetchmail 删除 %d 封邮件， %d 字节。" + +#: driver.c:367 +#, c-format +msgid " %d message %d octets long skipped by fetchmail." +msgid_plural " %d messages %d octets long skipped by fetchmail." +msgstr[0] "fetchmail 跳过 %d 封邮件，%d octets。" + +#: driver.c:503 +#, c-format +msgid "skipping message %s@%s:%d" +msgstr "忽略 %s@%s:%d 封邮件" + +#: driver.c:557 +#, c-format +msgid "skipping message %s@%s:%d (%d octets)" +msgstr "跳过 %s@%s:%d 封邮件(%d 字节)" + +#: driver.c:573 +msgid " (length -1)" +msgstr "( 长度 -1)" + +#: driver.c:576 +msgid " (oversized)" +msgstr "(超大)" + +#: driver.c:591 +#, c-format +msgid "couldn't fetch headers, message %s@%s:%d (%d octets)\n" +msgstr "无法获取邮件头，邮件 %s@%s:%d (%d 字节)\n" + +#: driver.c:608 +#, c-format +msgid "reading message %s@%s:%d of %d" +msgstr "读取 %1$s@%2$s:%4$d 封中的 %3$d 封邮件" + +#: driver.c:613 +#, c-format +msgid " (%d octets)" +msgstr " (%d 字节)" + +#: driver.c:614 +#, c-format +msgid " (%d header octets)" +msgstr "(邮件头 %d 字节)" + +#: driver.c:682 +#, c-format +msgid " (%d body octets)" +msgstr "(邮件内容 %d 字节)" + +#: driver.c:743 +#, c-format +msgid "message %s@%s:%d was not the expected length (%d actual != %d expected)\n" +msgstr "%s@%s:%d 邮件非所需大小 (实际 %d 字节!= 所要求的 %d 字节)\n" + +#: driver.c:774 +msgid " retained\n" +msgstr "已保留\n" + +#: driver.c:784 +msgid " flushed\n" +msgstr "已删除\n" + +#: driver.c:801 +msgid " not flushed\n" +msgstr "未删除\n" + +#: driver.c:819 +#, c-format +msgid "fetchlimit %d reached; %d message left on server %s account %s\n" +msgid_plural "fetchlimit %d reached; %d messages left on server %s account %s\n" +msgstr[0] "到达收件上限 %d；%d 封邮件留在服务器 %s 帐号为 %s\n" + +#: driver.c:876 +#, c-format +msgid "timeout after %d seconds waiting to connect to server %s.\n" +msgstr "等待连接服务器 %2$s %1$d 秒后超时。\n" + +#: driver.c:880 +#, c-format +msgid "timeout after %d seconds waiting for server %s.\n" +msgstr "等待服务器 %2$s %1$d 秒后超时。\n" + +#: driver.c:884 +#, c-format +msgid "timeout after %d seconds waiting for %s.\n" +msgstr "等待 %2$s %1$d 秒后超时。\n" + +#: driver.c:889 +#, c-format +msgid "timeout after %d seconds waiting for listener to respond.\n" +msgstr "等待接收端 %d 秒无响应超时。\n" + +#: driver.c:892 +#, c-format +msgid "timeout after %d seconds.\n" +msgstr "等待 %d 秒后超时。\n" + +#: driver.c:904 +msgid "Subject: fetchmail sees repeated timeouts" +msgstr "主题: fetchmail 发现反复超时" + +#: driver.c:907 +#, c-format +msgid "Fetchmail saw more than %d timeouts while attempting to get mail from %s@%s.\n" +msgstr "Fetchmail 尝试从 %2$s@%3$s 收取邮件时发现多于 %1$d 次超时。\n" + +#: driver.c:911 +msgid "" +"This could mean that your mailserver is stuck, or that your SMTP\n" +"server is wedged, or that your mailbox file on the server has been\n" +"corrupted by a server error. You can run `fetchmail -v -v' to\n" +"diagnose the problem.\n" +"\n" +"Fetchmail won't poll this mailbox again until you restart it.\n" +msgstr "" +"这可能意味着您的邮件服务器正忙，或者您的 SMTP 服务器拥挤，\n" +"或者您位于服务器上的邮箱已经被服务器中的错误破坏了。您可以\n" +"运行 ‘fetchmail -v -v’ 来分析这个问题\n" +"\n" +"Fetchmail 不会再查寻此邮箱中的邮件，除非您重启\n" + +#: driver.c:936 +#, c-format +msgid "pre-connection command failed with status %d\n" +msgstr "预连接命令失败，返回状态 %d\n" + +#: driver.c:960 +#, c-format +msgid "couldn't find HESIOD pobox for %s\n" +msgstr "HESIOD pobox 中找不到 %s\n" + +#: driver.c:981 +msgid "Lead server has no name.\n" +msgstr "主服务器无名字。\n" + +#: driver.c:1005 +#, c-format +msgid "couldn't find canonical DNS name of %s (%s): %s\n" +msgstr "无法找到规范的 %s (%s) 的 DNS 名称： %s\n" + +#: driver.c:1052 +#, c-format +msgid "%s connection to %s failed" +msgstr "%s 连接至 %s 时失败" + +#: driver.c:1068 +msgid "Subject: Fetchmail unreachable-server warning." +msgstr "主题: Fetchmail 警告，找不到服务器。" + +#: driver.c:1070 +#, c-format +msgid "Fetchmail could not reach the mail server %s:" +msgstr "Fetchmail 不能找到邮件服务器 %s:" + +#: driver.c:1096 +msgid "SSL connection failed.\n" +msgstr "SSL 连接失败。\n" + +#: driver.c:1149 +#, c-format +msgid "Lock-busy error on %s@%s\n" +msgstr "%s@%s 出现死锁错误\n" + +#: driver.c:1153 +#, c-format +msgid "Server busy error on %s@%s\n" +msgstr "%s@%s 出现服务器繁忙错误\n" + +#: driver.c:1158 +#, c-format +msgid "Authorization failure on %s@%s%s\n" +msgstr "%s@%s%s 出现授权失败错误\n" + +#: driver.c:1161 +msgid " (previously authorized)" +msgstr "(事先已授权)" + +#: driver.c:1182 +#, c-format +msgid "Subject: fetchmail authentication failed on %s@%s" +msgstr "主题: fetchmail 在 %s@%s 上验证失败" + +#: driver.c:1186 +#, c-format +msgid "Fetchmail could not get mail from %s@%s.\n" +msgstr "Fetchmail 无法从 %s@%s 中获取邮件。\n" + +#: driver.c:1190 +msgid "" +"The attempt to get authorization failed.\n" +"Since we have already succeeded in getting authorization for this\n" +"connection, this is probably another failure mode (such as busy server)\n" +"that fetchmail cannot distinguish because the server didn't send a useful\n" +"error message." +msgstr "" +"尝试获取授权时失败。\n" +"由于我们已经成功获得本次连接的授权，但因为服务器无法给出有用的错误\n" +"提示信息，因此这可能是另一种错误情况(比如服务器忙)，从而导致\n" +" fetchmail 无法区分这些错误。" + +#: driver.c:1196 +msgid "" +"\n" +"However, if you HAVE changed your account details since starting the\n" +"fetchmail daemon, you need to stop the daemon, change your configuration\n" +"of fetchmail, and then restart the daemon.\n" +"\n" +"The fetchmail daemon will continue running and attempt to connect\n" +"at each cycle. No future notifications will be sent until service\n" +"is restored." +msgstr "" +"\n" +"但是，如果您在开启 fetchmail 后台服务后确实改过帐户信息，那您必须\n" +"先停止后台服务，然后修改您的 fetchmail 配置，最后再重启服务。\n" +"\n" +"fetchmail 后台服务会继续运行并在每次被唤醒时尝试进行连接。除非\n" +"服务重置，否则它不会再发送任何提示信息了。" + +#: driver.c:1206 +msgid "" +"The attempt to get authorization failed.\n" +"This probably means your password is invalid, but some servers have\n" +"other failure modes that fetchmail cannot distinguish from this\n" +"because they don't send useful error messages on login failure.\n" +"\n" +"The fetchmail daemon will continue running and attempt to connect\n" +"at each cycle. No future notifications will be sent until service\n" +"is restored." +msgstr "" +"尝试获取授权时失败。\n" +"这通常表明您的密码无效。但由于某些服务器在登录失败时不给出有用的\n" +"错误信息，因此这就导致了 fetchmail 无法与其它的错误情况进行区分。\n" +"\n" +"fetchmail 后台服务会继续运行并在每次被唤醒时尝试进行连接。除非服务\n" +"重置，否则它不会再发送任何提示信息了。" + +#: driver.c:1222 +#, c-format +msgid "Repoll immediately on %s@%s\n" +msgstr "立即从 %s@%s 中重新收件\n" + +#: driver.c:1227 +#, c-format +msgid "Unknown login or authentication error on %s@%s\n" +msgstr "%s@%s 有未知的登录或验证错误\n" + +#: driver.c:1251 +#, c-format +msgid "Authorization OK on %s@%s\n" +msgstr "验证正确 %s@%s\n" + +#: driver.c:1257 +#, c-format +msgid "Subject: fetchmail authentication OK on %s@%s" +msgstr "主题: fetchmail 验证正确 %s@%s" + +#: driver.c:1261 +#, c-format +msgid "Fetchmail was able to log into %s@%s.\n" +msgstr "Fetchmail 可登录 %s@%s。\n" + +#: driver.c:1265 +msgid "Service has been restored.\n" +msgstr "服务已经被重置。\n" + +#: driver.c:1297 +#, c-format +msgid "selecting or re-polling folder %s\n" +msgstr "正在选择或重新检索邮箱 %s\n" + +#: driver.c:1299 +msgid "selecting or re-polling default folder\n" +msgstr "正在选择或重检默认邮箱\n" + +#: driver.c:1311 +#, c-format +msgid "%s at %s (folder %s)" +msgstr "%s 在 %s (邮箱 %s)" + +#: driver.c:1314 rcfile_y.y:381 +#, c-format +msgid "%s at %s" +msgstr "%s 在 %s" + +#: driver.c:1319 +#, c-format +msgid "Polling %s\n" +msgstr "正在检取 %s\n" + +#: driver.c:1323 +#, c-format +msgid "%d message (%d %s) for %s" +msgid_plural "%d messages (%d %s) for %s" +msgstr[0] "%4$s 有 %1$d 封邮件 (%2$d %3$s)" + +#: driver.c:1326 +msgid "seen" +msgid_plural "seen" +msgstr[0] "已读" + +#: driver.c:1329 +#, c-format +msgid "%d message for %s" +msgid_plural "%d messages for %s" +msgstr[0] "%2$s 有 %1$d 封邮件" + +#: driver.c:1336 +#, c-format +msgid " (%d octets).\n" +msgstr "(%d 字节)。\n" + +#: driver.c:1342 +#, c-format +msgid "No mail for %s\n" +msgstr "%s 无邮件\n" + +#: driver.c:1375 imap.c:90 +msgid "bogus message count!" +msgstr "发现无效邮件！" + +#: driver.c:1517 +msgid "socket" +msgstr "套接口" + +#: driver.c:1520 +msgid "missing or bad RFC822 header" +msgstr "未找到或错误的 RFC822 协议头" + +#: driver.c:1523 +msgid "MDA" +msgstr "MDA" + +#: driver.c:1526 +msgid "client/server synchronization" +msgstr "客户端/服务器同步" + +#: driver.c:1529 +msgid "client/server protocol" +msgstr "客户端/服务器协议" + +#: driver.c:1532 +msgid "lock busy on server" +msgstr "服务器死锁" + +#: driver.c:1535 +msgid "SMTP transaction" +msgstr "处理 SMTP" + +#: driver.c:1538 +msgid "DNS lookup" +msgstr "查询 DNS" + +#: driver.c:1541 +msgid "undefined" +msgstr "未定义" + +#: driver.c:1547 +#, c-format +msgid "%s error while fetching from %s@%s and delivering to SMTP host %s\n" +msgstr "从 %2$s@%3$s 收邮件并投递至 SMTP 主机 %4$s 时出现错误 %1$s\n" + +#: driver.c:1549 +msgid "unknown" +msgstr "未知" + +#: driver.c:1551 +#, c-format +msgid "%s error while fetching from %s@%s\n" +msgstr "从 %2$s@%3$s 收件时产生错误 %1$s\n" + +#: driver.c:1562 +#, c-format +msgid "post-connection command failed with status %d\n" +msgstr "连接后执行程序失败，错误代码 %d\n" + +#: driver.c:1581 +msgid "Kerberos V4 support not linked.\n" +msgstr "未连接 Kerberos V4 支持\n" + +#: driver.c:1589 +msgid "Kerberos V5 support not linked.\n" +msgstr "未连接 Kerberos V5 支持\n" + +#: driver.c:1600 +#, c-format +msgid "Option --flush is not supported with %s\n" +msgstr "%s 不支持 --flush 选项\n" + +#: driver.c:1606 +#, c-format +msgid "Option --all is not supported with %s\n" +msgstr "%s 不支持 --all 选项\n" + +#: driver.c:1615 +#, c-format +msgid "Option --limit is not supported with %s\n" +msgstr "%s 不支持 --limit 选项\n" + +#: env.c:59 +#, c-format +msgid "" +"%s: The QMAILINJECT environment variable is set.\n" +"This is dangerous as it can make qmail-inject or qmail's sendmail wrapper\n" +"tamper with your From: or Message-ID: headers.\n" +"Try \"env QMAILINJECT= %s YOUR ARGUMENTS HERE\"\n" +"%s: Abort.\n" +msgstr "" +"%s: 设置了 QMAILINJECT 环境变量。\n" +"这很危险，由于它会引起 qmail-inject 或是 qmail 调用 sendmail，\n" +"由此窜改您邮件头中的 From: 或是 Message-ID 字段。\n" +"尝试用 “env QMAILINJECT= %s 您的参数”\n" +"%s: 退出\n" + +#: env.c:71 +#, c-format +msgid "" +"%s: The NULLMAILER_FLAGS environment variable is set.\n" +"This is dangerous as it can make nullmailer-inject or nullmailer's\n" +"sendmail wrapper tamper with your From:, Message-ID: or Return-Path: headers.\n" +"Try \"env NULLMAILER_FLAGS= %s YOUR ARGUMENTS HERE\"\n" +"%s: Abort.\n" +msgstr "" +"%s: 设置了 NULLMAILER_FLAGS 环境变量。\n" +"这很危险，由于它会引起 nullmailer-inject 或是 nullmailer 调用\n" +"sendmail，由此窜改您邮件头中的 From: ，Message-ID 或是\n" +"Return-Path:字段。尝试用 “env NULLMAILER_FLAGS= %s 您的参数”\n" +"%s: 退出\n" + +#: env.c:83 +#, c-format +msgid "%s: You don't exist. Go away.\n" +msgstr "%s: 不存在您的用户名，退出\n" + +#: env.c:145 +#, c-format +msgid "%s: can't determine your host!" +msgstr "%s: 无法确认您的主机!" + +#: env.c:168 +#, c-format +msgid "gethostbyname failed for %s\n" +msgstr "%s 主机上 gethostbyname 函数出错\n" + +#: env.c:170 +msgid "Cannot find my own host in hosts database to qualify it!\n" +msgstr "无法在主机数据库中找到自己的主机来验证它！\n" + +#: env.c:174 +msgid "" +"Trying to continue with unqualified hostname.\n" +"DO NOT report broken Received: headers, HELO/EHLO lines or similar problems!\n" +"DO repair your /etc/hosts, DNS, NIS or LDAP instead.\n" +msgstr "" +"正在尝试用未验证的主机名继续操作。\n" +"不要报告类似于 Received:，HELO/EHLO 邮件头损坏等问题！\n" +"确保您已修正了 /etc/hosts，DNS，NIS 或者 LDAP。\n" + +#: etrn.c:49 odmr.c:60 +#, c-format +msgid "%s's SMTP listener does not support ESMTP\n" +msgstr "%s 的 SMTP 端不支持 ESMTP\n" + +#: etrn.c:55 +#, c-format +msgid "%s's SMTP listener does not support ETRN\n" +msgstr "%s 的 SMTP 端不支持 ETRN\n" + +#: etrn.c:79 +#, c-format +msgid "Queuing for %s started\n" +msgstr "开始对 %s 进行排队处理\n" + +#: etrn.c:84 +#, c-format +msgid "No messages waiting for %s\n" +msgstr "不存在等待 %s 的邮件\n" + +#: etrn.c:90 +#, c-format +msgid "Pending messages for %s started\n" +msgstr "对 %s 进行挂起邮件处理\n" + +#: etrn.c:94 +#, c-format +msgid "Unable to queue messages for node %s\n" +msgstr "无法对 %s 节点进行邮件排队\n" + +#: etrn.c:98 +#, c-format +msgid "Node %s not allowed: %s\n" +msgstr "不允许节点 %s: %s\n" + +#: etrn.c:102 +msgid "ETRN syntax error\n" +msgstr "ETRN 语法错误\n" + +#: etrn.c:106 +msgid "ETRN syntax error in parameters\n" +msgstr "ETRN 的参数中有语法错误\n" + +#: etrn.c:110 +#, c-format +msgid "Unknown ETRN error %d\n" +msgstr "未知的 ETRN 错误 %d\n" + +#: etrn.c:154 +msgid "Option --keep is not supported with ETRN\n" +msgstr "ETRN 不支持 --keep 选项\n" + +#: etrn.c:158 +msgid "Option --flush is not supported with ETRN\n" +msgstr "ETRN 不支持 --flush 选项\n" + +#: etrn.c:162 +msgid "Option --folder is not supported with ETRN\n" +msgstr "ETRN 不支持 --folder 选项\n" + +#: etrn.c:166 +msgid "Option --check is not supported with ETRN\n" +msgstr "ETRN 不支持 --check 选项\n" + +#: fetchmail.c:137 +msgid "" +"Copyright (C) 2002, 2003 Eric S. Raymond\n" +"Copyright (C) 2004 Matthias Andree, Eric S. Raymond, Robert M. Funk, Graham Wilson\n" +"Copyright (C) 2005-2006 Sunil Shetye\n" +"Copyright (C) 2005-2007 Matthias Andree\n" +msgstr "" +"Copyright (C) 2002, 2003 Eric S. Raymond\n" +"Copyright (C) 2004 Matthias Andree, Eric S. Raymond, Robert M. Funk, Graham Wilson\n" +"Copyright (C) 2005-2006 Sunil Shetye\n" +"Copyright (C) 2005-2007 Matthias Andree\n" + +#: fetchmail.c:142 +msgid "" +"Fetchmail comes with ABSOLUTELY NO WARRANTY. This is free software, and you\n" +"are welcome to redistribute it under certain conditions. For details,\n" +"please see the file COPYING in the source or documentation directory.\n" +msgstr "" +"Fetchmail 绝对不含任何保证。这是自由软件，而您被鼓励在一定条件下\n" +"重新分发它。\n" +"详情请看源文件或是文档目录中的 COPYING 部分。\n" + +#: fetchmail.c:176 +msgid "WARNING: Running as root is discouraged.\n" +msgstr "警告: 不提倡以 root 身份运行\n" + +#: fetchmail.c:188 +msgid "fetchmail: invoked with" +msgstr "fetchmail: 调用参数" + +#: fetchmail.c:212 +msgid "could not get current working directory\n" +msgstr "无法得到当前工作目录\n" + +#: fetchmail.c:280 +#, c-format +msgid "This is fetchmail release %s" +msgstr "这是 fetchmail 发行版 %s" + +#: fetchmail.c:395 +#, c-format +msgid "Taking options from command line%s%s\n" +msgstr "正从命令行获得选项 %s%s\n" + +#: fetchmail.c:396 +msgid " and " +msgstr "和" + +#: fetchmail.c:401 +#, c-format +msgid "No mailservers set up -- perhaps %s is missing?\n" +msgstr "未设置邮件服务器 -- 可能未找到 %s？\n" + +#: fetchmail.c:422 +msgid "fetchmail: no mailservers have been specified.\n" +msgstr "fetchmail: 未指定邮件服务器\n" + +#: fetchmail.c:434 +msgid "fetchmail: no other fetchmail is running\n" +msgstr "fetchmail: 无其它 fetchmail 正在运行\n" + +#: fetchmail.c:440 +#, c-format +msgid "fetchmail: error killing %s fetchmail at %d; bailing out.\n" +msgstr "fetchmail: 终止 %s fetchmail 进程号 %d 时出错；退出\n" + +#: fetchmail.c:441 fetchmail.c:450 +msgid "background" +msgstr "后台" + +#: fetchmail.c:441 fetchmail.c:450 +msgid "foreground" +msgstr "前台" + +#: fetchmail.c:449 +#, c-format +msgid "fetchmail: %s fetchmail at %d killed.\n" +msgstr "fetchmail: %s fetchmail 进程号 %d 终止\n" + +#: fetchmail.c:472 +msgid "fetchmail: can't check mail while another fetchmail to same host is running.\n" +msgstr "fetchmail: 有另一个 fetchmail 在同一主机上运行时无法检查邮件。\n" + +#: fetchmail.c:478 +#, c-format +msgid "fetchmail: can't poll specified hosts with another fetchmail running at %d.\n" +msgstr "fetchmail: 有另一个 fetchmail 进程号 %d 在指定主机上运行时无法收邮件。\n" + +#: fetchmail.c:485 +#, c-format +msgid "fetchmail: another foreground fetchmail is running at %d.\n" +msgstr "fetchmail: 另一个前台 fetchmail 进程号 %d 正在运行。\n" + +#: fetchmail.c:495 +msgid "fetchmail: can't accept options while a background fetchmail is running.\n" +msgstr "fetchmail: 有后台 fetchmail 正在运行时无法接受选项\n" + +#: fetchmail.c:501 +#, c-format +msgid "fetchmail: background fetchmail at %d awakened.\n" +msgstr "fetchmail: 后台 fetchmail 进程号 %d 被唤醒\n" + +#: fetchmail.c:513 +#, c-format +msgid "fetchmail: elder sibling at %d died mysteriously.\n" +msgstr "fetchmail: 上次 fetchmail 进程号 %d 不明原因的终止\n" + +#: fetchmail.c:528 +#, c-format +msgid "fetchmail: can't find a password for %s@%s.\n" +msgstr "fetchmail: 无法找到 %s@%s 的密码\n" + +#: fetchmail.c:532 +#, c-format +msgid "Enter password for %s@%s: " +msgstr "输入 %s@%s 的密码:" + +#: fetchmail.c:557 fetchmail.c:593 +msgid "fetchmail: Warning: syslog and logfile are set. Check both for logs!\n" +msgstr "fetchmail: 警告: 设置了 syslog 和 logfile。通过两者查看记录！\n" + +#: fetchmail.c:569 +msgid "fetchmail: Cannot detach into background. Aborting.\n" +msgstr "fetchmail: 无法转入后台。退出\n" + +#: fetchmail.c:573 +#, c-format +msgid "starting fetchmail %s daemon \n" +msgstr "开启 fetchmail %s 后台服务\n" + +#: fetchmail.c:589 fetchmail.c:591 +#, c-format +msgid "could not open %s to append logs to \n" +msgstr "无法打开 %s 添加记录\n" + +#: fetchmail.c:630 +#, fuzzy, c-format +msgid "couldn't time-check %s (error %d)\n" +msgstr "无法时限检测 %s (错误号 %d)\n" + +#: fetchmail.c:635 +#, c-format +msgid "restarting fetchmail (%s changed)\n" +msgstr "正在重启 fetchmail (%s 改变了)\n" + +#: fetchmail.c:640 +msgid "attempt to re-exec may fail as directory has not been restored\n" +msgstr "由于目录尚未重置，因此重新执行的尝试可能失败\n" + +#: fetchmail.c:667 +msgid "attempt to re-exec fetchmail failed\n" +msgstr "重新执行 fetchmail 的尝试失败了\n" + +#: fetchmail.c:711 +#, c-format +msgid "poll of %s skipped (failed authentication or too many timeouts)\n" +msgstr "忽略收取 %s 的邮件 (验证失败或多次超时)\n" + +#: fetchmail.c:723 +#, c-format +msgid "interval not reached, not querying %s\n" +msgstr "时间间隔未到，不查寻 %s \n" + +#: fetchmail.c:761 +msgid "Query status=0 (SUCCESS)\n" +msgstr "查询状态=0 (成功)\n" + +#: fetchmail.c:763 +msgid "Query status=1 (NOMAIL)\n" +msgstr "查询状态=1 (无邮件)\n" + +#: fetchmail.c:765 +msgid "Query status=2 (SOCKET)\n" +msgstr "查询状态=2 (套接字输入输出错误)\n" + +#: fetchmail.c:767 +msgid "Query status=3 (AUTHFAIL)\n" +msgstr "查询状态=3 (用户验证失败)\n" + +#: fetchmail.c:769 +msgid "Query status=4 (PROTOCOL)\n" +msgstr "查询状态=4 (协议无效)\n" + +#: fetchmail.c:771 +msgid "Query status=5 (SYNTAX)\n" +msgstr "查询状态=5 (命令行语法错误)\n" + +#: fetchmail.c:773 +msgid "Query status=6 (IOERR)\n" +msgstr "查询状态=6 (配置文件权限错误)\n" + +#: fetchmail.c:775 +msgid "Query status=7 (ERROR)\n" +msgstr "查询状态=7 (协议错误)\n" + +#: fetchmail.c:777 +msgid "Query status=8 (EXCLUDE)\n" +msgstr "查询状态=8 (客户端受到排斥)\n" + +#: fetchmail.c:779 +msgid "Query status=9 (LOCKBUSY)\n" +msgstr "查询状态=9 (服务器死锁)\n" + +#: fetchmail.c:781 +msgid "Query status=10 (SMTP)\n" +msgstr "查询状态=10 (SMTP 错误)\n" + +#: fetchmail.c:783 +msgid "Query status=11 (DNS)\n" +msgstr "查询状态=11 (DNS 错误)\n" + +#: fetchmail.c:785 +msgid "Query status=12 (BSMTP)\n" +msgstr "查询状态=12 (无法打开批量输出)\n" + +#: fetchmail.c:787 +msgid "Query status=13 (MAXFETCH)\n" +msgstr "查询状态=13 (到达收件上限)\n" + +#: fetchmail.c:789 +#, c-format +msgid "Query status=%d\n" +msgstr "查询状态=%d\n" + +#: fetchmail.c:835 +msgid "All connections are wedged. Exiting.\n" +msgstr "所有连接堵塞。退出\n" + +#: fetchmail.c:842 +#, c-format +msgid "sleeping at %s for %d seconds\n" +msgstr "在 %s 休眠 %d 秒\n" + +#: fetchmail.c:866 +#, c-format +msgid "awakened by %s\n" +msgstr "通过信号 %s 唤醒\n" + +#: fetchmail.c:869 +#, c-format +msgid "awakened by signal %d\n" +msgstr "通过信号 %d 唤醒\n" + +#: fetchmail.c:876 +#, c-format +msgid "awakened at %s\n" +msgstr "在 %s 被唤醒\n" + +#: fetchmail.c:882 +#, c-format +msgid "normal termination, status %d\n" +msgstr "正常结束，返回值 %d\n" + +#: fetchmail.c:1034 +#, fuzzy +msgid "couldn't time-check the run-control file\n" +msgstr "无法对 run-control 文件进行时限检测\n" + +#: fetchmail.c:1067 +#, c-format +msgid "Warning: multiple mentions of host %s in config file\n" +msgstr "警告: 在配置文件中多次提及主机 %s\n" + +#: fetchmail.c:1100 +msgid "fetchmail: Error: multiple \"defaults\" records in config file.\n" +msgstr "fetchmail: 错误: 在配置文件中有多个 “default” 记录。\n" + +#: fetchmail.c:1222 +msgid "SSL support is not compiled in.\n" +msgstr "SSL 支持未编译在内\n" + +#: fetchmail.c:1229 +msgid "KERBEROS v4 support is configured, but not compiled in.\n" +msgstr "设置了 KERBEROS v4 支持，但未编译在内\n" + +#: fetchmail.c:1235 +msgid "KERBEROS v5 support is configured, but not compiled in.\n" +msgstr "设置了 KERBEROS v5 支持，但未编译在内\n" + +#: fetchmail.c:1241 +msgid "GSSAPI support is configured, but not compiled in.\n" +msgstr "设置了 GSSAPI 支持，但未编译在内\n" + +#: fetchmail.c:1271 +#, c-format +msgid "fetchmail: warning: no DNS available to check multidrop fetches from %s\n" +msgstr "fetchmail: 警告: 无可用的 DNS 来检查取自 %s 的多投邮件\n" + +#: fetchmail.c:1282 +#, c-format +msgid "warning: multidrop for %s requires envelope option!\n" +msgstr "警告: %s 设置了多投邮件，需设置 envelope 选项！\n" + +#: fetchmail.c:1283 +msgid "warning: Do not ask for support if all mail goes to postmaster!\n" +msgstr "警告: 如果所有邮件均被邮件管理员收取，不要寻求支持！\n" + +#: fetchmail.c:1300 +#, c-format +msgid "fetchmail: %s configuration invalid, specify positive port number for service or port\n" +msgstr "fetchmail: %s 配置无效，为服务或端口指定大于零的端口\n" + +#: fetchmail.c:1307 +#, c-format +msgid "fetchmail: %s configuration invalid, RPOP requires a privileged port\n" +msgstr "fetchmail: %s 配置无效，RPOP 要求开放一个特许端口\n" + +#: fetchmail.c:1325 +#, c-format +msgid "%s configuration invalid, LMTP can't use default SMTP port\n" +msgstr "%s 配置无效，LMTP 不能用默认的 SMTP 端口\n" + +#: fetchmail.c:1339 +msgid "Both fetchall and keep on in daemon or idle mode is a mistake!\n" +msgstr "收取所有邮件并保留服务器上的备份或使用 idle 模式是错误的！\n" + +#: fetchmail.c:1364 +#, c-format +msgid "terminated with signal %d\n" +msgstr "以信号 %d 终止\n" + +#: fetchmail.c:1437 +#, c-format +msgid "%s querying %s (protocol %s) at %s: poll started\n" +msgstr "%1$s 在 %4$s 查寻 %2$s (协议 %3$s): 收件开始\n" + +#: fetchmail.c:1462 +msgid "POP2 support is not configured.\n" +msgstr "未设置 POP2 支持\n" + +#: fetchmail.c:1474 +msgid "POP3 support is not configured.\n" +msgstr "未设置 POP3 支持\n" + +#: fetchmail.c:1484 +msgid "IMAP support is not configured.\n" +msgstr "未设置 IMAP 支持\n" + +#: fetchmail.c:1490 +msgid "ETRN support is not configured.\n" +msgstr "未设置 ETRN 支持\n" + +#: fetchmail.c:1498 +msgid "ODMR support is not configured.\n" +msgstr "未设置 ODMR 支持\n" + +#: fetchmail.c:1505 +msgid "unsupported protocol selected.\n" +msgstr "选中了不支持的协议\n" + +#: fetchmail.c:1515 +#, c-format +msgid "%s querying %s (protocol %s) at %s: poll completed\n" +msgstr "%1$s 在 %4$s 查询 %2$s (协议 %3$s): 收件完成\n" + +#: fetchmail.c:1532 +#, c-format +msgid "Poll interval is %d seconds\n" +msgstr "收件间隔 %d 秒\n" + +#: fetchmail.c:1534 +#, c-format +msgid "Logfile is %s\n" +msgstr "日志文件为 %s\n" + +#: fetchmail.c:1536 +#, c-format +msgid "Idfile is %s\n" +msgstr "Idfile 文件为 %s\n" + +#: fetchmail.c:1539 +msgid "Progress messages will be logged via syslog\n" +msgstr "邮件情况将通过 syslog 来记录\n" + +#: fetchmail.c:1542 +msgid "Fetchmail will masquerade and will not generate Received\n" +msgstr "Fetchmail 将进行伪装且不会生成 Receiverd 部分\n" + +#: fetchmail.c:1544 +msgid "Fetchmail will show progress dots even in logfiles.\n" +msgstr "Fetchmail 将在日志文件中显示进度条(以点的形式)\n" + +#: fetchmail.c:1546 +#, c-format +msgid "Fetchmail will forward misaddressed multidrop messages to %s.\n" +msgstr "Fetchmail 将转发地址错误的多投邮件给 %s。\n" + +#: fetchmail.c:1550 +msgid "Fetchmail will direct error mail to the postmaster.\n" +msgstr "Fetchmail 将把错误邮件转给邮件管理员\n" + +#: fetchmail.c:1552 +msgid "Fetchmail will direct error mail to the sender.\n" +msgstr "Fetchmail 将把错误邮件退给发送者\n" + +#: fetchmail.c:1559 +#, c-format +msgid "Options for retrieving from %s@%s:\n" +msgstr "从 %s@%s 收件时的选项:\n" + +#: fetchmail.c:1563 +#, c-format +msgid " Mail will be retrieved via %s\n" +msgstr " 邮件将通过 %s 收取\n" + +#: fetchmail.c:1566 +#, c-format +msgid " Poll of this server will occur every %d interval.\n" +msgid_plural " Poll of this server will occur every %d intervals.\n" +msgstr[0] "每隔 %d 秒将收取此服务器中的邮件\n" + +#: fetchmail.c:1570 +#, c-format +msgid " True name of server is %s.\n" +msgstr " 服务器的实名为 %s。\n" + +#: fetchmail.c:1573 +msgid " This host will not be queried when no host is specified.\n" +msgstr " 若不指明主机将不查询此主机\n" + +#: fetchmail.c:1574 +msgid " This host will be queried when no host is specified.\n" +msgstr " 若不指明主机将查询此主机\n" + +#: fetchmail.c:1578 +msgid " Password will be prompted for.\n" +msgstr "密码会被提示\n" + +#: fetchmail.c:1582 +#, c-format +msgid " APOP secret = \"%s\".\n" +msgstr " APOP 密码 = “%s”\n" + +#: fetchmail.c:1585 +#, c-format +msgid " RPOP id = \"%s\".\n" +msgstr " RPOP 密码 = “%s”\n" + +#: fetchmail.c:1588 +#, c-format +msgid " Password = \"%s\".\n" +msgstr " 密码 = “%s”\n" + +#: fetchmail.c:1597 +#, c-format +msgid " Protocol is KPOP with Kerberos %s authentication" +msgstr " 协议是带有 Kerberos %s 认证协议的 KPOP" + +#: fetchmail.c:1600 +#, c-format +msgid " Protocol is %s" +msgstr " 协议是 %s" + +#: fetchmail.c:1602 +#, c-format +msgid " (using service %s)" +msgstr " (正在使用服务 %s)" + +#: fetchmail.c:1604 +msgid " (using default port)" +msgstr " (正在使用默认端口)" + +#: fetchmail.c:1606 +msgid " (forcing UIDL use)" +msgstr " (正在强制使用 UIDL)" + +#: fetchmail.c:1612 +msgid " All available authentication methods will be tried.\n" +msgstr " 将尝试所有有效的验证方式\n" + +#: fetchmail.c:1615 +msgid " Password authentication will be forced.\n" +msgstr " 强制密码验证\n" + +#: fetchmail.c:1618 +msgid " MSN authentication will be forced.\n" +msgstr " 强制 MSN 验证\n" + +#: fetchmail.c:1621 +msgid " NTLM authentication will be forced.\n" +msgstr " 强制 NTLM 验证\n" + +#: fetchmail.c:1624 +msgid " OTP authentication will be forced.\n" +msgstr " 强制 OTP 验证\n" + +#: fetchmail.c:1627 +msgid " CRAM-Md5 authentication will be forced.\n" +msgstr " 强制 CRAM-Md5 验证\n" + +#: fetchmail.c:1630 +msgid " GSSAPI authentication will be forced.\n" +msgstr " 强制 GSSAPI 验证\n" + +#: fetchmail.c:1633 +msgid " Kerberos V4 authentication will be forced.\n" +msgstr " 强制 Kerberos V4 验证\n" + +#: fetchmail.c:1636 +msgid " Kerberos V5 authentication will be forced.\n" +msgstr " 强制 Kerberos V5 验证\n" + +#: fetchmail.c:1639 +msgid " End-to-end encryption assumed.\n" +msgstr " 假设为终端到终端加密\n" + +#: fetchmail.c:1643 +#, c-format +msgid " Mail service principal is: %s\n" +msgstr " 邮件服务协议验证方为: %s\n" + +#: fetchmail.c:1646 +msgid " SSL encrypted sessions enabled.\n" +msgstr "启用 SSL 加密会话\n" + +#: fetchmail.c:1648 +#, c-format +msgid " SSL protocol: %s.\n" +msgstr " SSL 协议: %s\n" + +#: fetchmail.c:1650 +msgid " SSL server certificate checking enabled.\n" +msgstr " 启用 SSL 服务器证书检查\n" + +#: fetchmail.c:1652 +#, c-format +msgid " SSL trusted certificate directory: %s\n" +msgstr " SSL 受信证书目录: %s\n" + +#: fetchmail.c:1655 +#, c-format +msgid " SSL key fingerprint (checked against the server key): %s\n" +msgstr " SSL 密钥指纹 (与服务器密钥对比过): %s\n" + +#: fetchmail.c:1658 +#, c-format +msgid " Server nonresponse timeout is %d seconds" +msgstr " 服务器未响应，超时 %d 秒" + +#: fetchmail.c:1660 +msgid " (default).\n" +msgstr " (默认)。\n" + +#: fetchmail.c:1667 +msgid " Default mailbox selected.\n" +msgstr " 已选中默认邮箱。\n" + +#: fetchmail.c:1672 +msgid " Selected mailboxes are:" +msgstr " 选中的邮箱是:" + +#: fetchmail.c:1678 +msgid " All messages will be retrieved (--all on).\n" +msgstr " 收取所有邮件( --all 选项开启).\n" + +#: fetchmail.c:1679 +msgid " Only new messages will be retrieved (--all off).\n" +msgstr " 只收取新邮件( --all 选项关闭).\n" + +#: fetchmail.c:1681 +msgid " Fetched messages will be kept on the server (--keep on).\n" +msgstr " 收取的邮件会在服务器上保留副本( --keep 开启).\n" + +#: fetchmail.c:1682 +msgid " Fetched messages will not be kept on the server (--keep off).\n" +msgstr " 收取的邮件不会保留在服务器上( --keep 关闭).\n" + +#: fetchmail.c:1684 +msgid " Old messages will be flushed before message retrieval (--flush on).\n" +msgstr " 在收取新邮件前删除旧邮件(--flush 开启).\n" + +#: fetchmail.c:1685 +msgid " Old messages will not be flushed before message retrieval (--flush off).\n" +msgstr " 在收取新邮件前不删除旧邮件(--flush 关闭).\n" + +#: fetchmail.c:1687 +msgid " Oversized messages will be flushed before message retrieval (--limitflush on).\n" +msgstr " 收件前将删除超大的邮件(--limitflush 开启).\n" + +#: fetchmail.c:1688 +msgid " Oversized messages will not be flushed before message retrieval (--limitflush off).\n" +msgstr " 收件前将不删除超大的邮件(--limitflush 关闭).\n" + +#: fetchmail.c:1690 +msgid " Rewrite of server-local addresses is enabled (--norewrite off).\n" +msgstr " 本地收件人地址重写(--norewrite 关闭).\n" + +#: fetchmail.c:1691 +msgid " Rewrite of server-local addresses is disabled (--norewrite on).\n" +msgstr " 不重写本地收件人地址(--norewrite 开启).\n" + +#: fetchmail.c:1693 +msgid " Carriage-return stripping is enabled (stripcr on).\n" +msgstr " 回车符清除(stripcr 开启).\n" + +#: fetchmail.c:1694 +msgid " Carriage-return stripping is disabled (stripcr off).\n" +msgstr " 不清除回车符(stripcr 关闭).\n" + +#: fetchmail.c:1696 +msgid " Carriage-return forcing is enabled (forcecr on).\n" +msgstr " 强行在换行前插入回车符(forcecr 开启).\n" + +#: fetchmail.c:1697 +msgid " Carriage-return forcing is disabled (forcecr off).\n" +msgstr " 不在换行前强行插入回车符(forcecr 关闭).\n" + +#: fetchmail.c:1699 +msgid " Interpretation of Content-Transfer-Encoding is disabled (pass8bits on).\n" +msgstr " 忽略 Content-Transfer-Encoding (pass8bits 开启).\n" + +#: fetchmail.c:1700 +msgid " Interpretation of Content-Transfer-Encoding is enabled (pass8bits off).\n" +msgstr " 不忽略 Content-Transfer-Encoding (pass8bits 关闭).\n" + +#: fetchmail.c:1702 +msgid " MIME decoding is enabled (mimedecode on).\n" +msgstr " 解开 MIME 编码 (mimedecode 开启).\n" + +#: fetchmail.c:1703 +msgid " MIME decoding is disabled (mimedecode off).\n" +msgstr " 不解开 MIME 编码 (mimedecode 关闭).\n" + +#: fetchmail.c:1705 +msgid " Idle after poll is enabled (idle on).\n" +msgstr " 收件后回到 idle 模式 (idle 开启).\n" + +#: fetchmail.c:1706 +msgid " Idle after poll is disabled (idle off).\n" +msgstr " 收件后不回到 idle 模式 (idle 关闭).\n" + +#: fetchmail.c:1708 +msgid " Nonempty Status lines will be discarded (dropstatus on)\n" +msgstr " 删除带有 Status 字样的行 (dropstatus 开启)\n" + +#: fetchmail.c:1709 +msgid " Nonempty Status lines will be kept (dropstatus off)\n" +msgstr " 保留带有 Status 字样的 行 (dropstatus 关闭)\n" + +#: fetchmail.c:1711 +msgid " Delivered-To lines will be discarded (dropdelivered on)\n" +msgstr " 删除带有 Delivered-to 的行 (dropdelivered 开启)\n" + +#: fetchmail.c:1712 +msgid " Delivered-To lines will be kept (dropdelivered off)\n" +msgstr " 保留带有 Delivered-to 的行 (dropdelivered 关闭)\n" + +#: fetchmail.c:1716 +#, c-format +msgid " Message size limit is %d octets (--limit %d).\n" +msgstr " 邮件大小被限制为 %d 字节 (--limit %d).\n" + +#: fetchmail.c:1719 +msgid " No message size limit (--limit 0).\n" +msgstr " 邮件大小无限制 (--limit 0).\n" + +#: fetchmail.c:1721 +#, c-format +msgid " Message size warning interval is %d seconds (--warnings %d).\n" +msgstr " 每隔 %d 秒发出邮件大小警告 (--warnings %d).\n" + +#: fetchmail.c:1724 +msgid " Size warnings on every poll (--warnings 0).\n" +msgstr " 每次收件都给出邮件大小警告 (--warnings 0).\n" + +#: fetchmail.c:1727 +#, c-format +msgid " Received-message limit is %d (--fetchlimit %d).\n" +msgstr " 单次收件限制为 %d 封(--fetchlimit %d).\n" + +#: fetchmail.c:1730 +msgid " No received-message limit (--fetchlimit 0).\n" +msgstr " 无收件限制 (--fetchlimit 0).\n" + +#: fetchmail.c:1732 +#, c-format +msgid " Fetch message size limit is %d (--fetchsizelimit %d).\n" +msgstr " 限制所收邮件大小为 %d 字节(--fetchsizelimit %d).\n" + +#: fetchmail.c:1735 +msgid " No fetch message size limit (--fetchsizelimit 0).\n" +msgstr " 所收邮件大小无限制 (--fetchsizelimit 0).\n" + +#: fetchmail.c:1739 +msgid " Do binary search of UIDs during each poll (--fastuidl 1).\n" +msgstr " 每次收件期间对 UIDs 进行折半查找 (--fastuidl 1).\n" + +#: fetchmail.c:1741 +#, c-format +msgid " Do binary search of UIDs during %d out of %d polls (--fastuidl %d).\n" +msgstr " 每 %2$d 次收件中有 %1$d 次对 UIDs 进行折半查找 (--fastuidl %3$d).\n" + +#: fetchmail.c:1744 +msgid " Do linear search of UIDs during each poll (--fastuidl 0).\n" +msgstr " 每次收件期间对 UIDs 进行线性查找 (--fastuidl 0).\n" + +#: fetchmail.c:1746 +#, c-format +msgid " SMTP message batch limit is %d.\n" +msgstr " 单次 SMTP 会话中最多传送 %d 封邮件。\n" + +#: fetchmail.c:1748 +msgid " No SMTP message batch limit (--batchlimit 0).\n" +msgstr " 单次 SMTP 会话中无传送邮件限制 (--batchlimit 0)。\n" + +#: fetchmail.c:1752 +#, c-format +msgid " Deletion interval between expunges forced to %d (--expunge %d).\n" +msgstr " 两次删除操作之间最多传送 %d 封邮件(--expunge %d)。\n" + +#: fetchmail.c:1754 +msgid " No forced expunges (--expunge 0).\n" +msgstr " 两次删除操作之间无传送邮件限制(--expunge 0)。\n" + +#: fetchmail.c:1761 +msgid " Domains for which mail will be fetched are:" +msgstr " 要收取的邮件位于服务器:" + +#: fetchmail.c:1766 fetchmail.c:1786 +msgid " (default)" +msgstr " (默认)" + +#: fetchmail.c:1771 +#, c-format +msgid " Messages will be appended to %s as BSMTP\n" +msgstr " 邮件作为 BSMTP 附加至 %s\n" + +#: fetchmail.c:1773 +#, c-format +msgid " Messages will be delivered with \"%s\".\n" +msgstr " 邮件通过 “%s” 投递。\n" + +#: fetchmail.c:1780 +#, c-format +msgid " Messages will be %cMTP-forwarded to:" +msgstr " 邮件将被 %cMPT 转发到:" + +#: fetchmail.c:1791 +#, c-format +msgid " Host part of MAIL FROM line will be %s\n" +msgstr " MAIL FROM 这一行的 Host 部分是 %s\n" + +#: fetchmail.c:1794 +#, c-format +msgid " Address to be put in RCPT TO lines shipped to SMTP will be %s\n" +msgstr " RCPT TO 这一行中将要被送往 SMTP 的地址是 %s\n" + +#: fetchmail.c:1803 +msgid " Recognized listener spam block responses are:" +msgstr " 识别出的监听端垃圾邮件拒收响应为:" + +# fetchmail.c:1809 +#: fetchmail.c:1809 +msgid " Spam-blocking disabled\n" +msgstr " 关闭垃圾邮件拒收\n" + +#: fetchmail.c:1812 +#, c-format +msgid " Server connection will be brought up with \"%s\".\n" +msgstr " 服务器连接将被 “%s” 唤起\n" + +#: fetchmail.c:1815 +msgid " No pre-connection command.\n" +msgstr " 无连接前要执行的程序。\n" + +#: fetchmail.c:1817 +#, c-format +msgid " Server connection will be taken down with \"%s\".\n" +msgstr " 服务器连接将被 “%s” 关闭。\n" + +#: fetchmail.c:1820 +msgid " No post-connection command.\n" +msgstr " 无连接后要执行的程序。\n" + +#: fetchmail.c:1823 +msgid " No localnames declared for this host.\n" +msgstr " 此服务器没有要关联的本地用户名。\n" + +#: fetchmail.c:1833 +msgid " Multi-drop mode: " +msgstr " 多投模式: " + +#: fetchmail.c:1835 +msgid " Single-drop mode: " +msgstr " 单投模式: " + +#: fetchmail.c:1837 +#, c-format +msgid "%d local name recognized.\n" +msgid_plural "%d local names recognized.\n" +msgstr[0] "识别出 %d 个本地用户名。\n" + +#: fetchmail.c:1852 +msgid " DNS lookup for multidrop addresses is enabled.\n" +msgstr " 启用 DNS 搜寻多投地址。\n" + +#: fetchmail.c:1853 +msgid " DNS lookup for multidrop addresses is disabled.\n" +msgstr " 关闭 DNS 搜寻多投地址。\n" + +#: fetchmail.c:1857 +msgid " Server aliases will be compared with multidrop addresses by IP address.\n" +msgstr " 服务器昵称将以 IP 地址与多投地址进行比较\n" + +#: fetchmail.c:1859 +msgid " Server aliases will be compared with multidrop addresses by name.\n" +msgstr " 服务器昵称将以名字与多投地址进行比较\n" + +#: fetchmail.c:1862 +msgid " Envelope-address routing is disabled\n" +msgstr " 禁用 Envelope-address 路由\n" + +#: fetchmail.c:1865 +#, c-format +msgid " Envelope header is assumed to be: %s\n" +msgstr " 邮件头假定为: %s\n" + +#: fetchmail.c:1868 +#, c-format +msgid " Number of envelope headers to be skipped over: %d\n" +msgstr " 跳过的邮件头数目为: %d\n" + +#: fetchmail.c:1871 +#, c-format +msgid " Prefix %s will be removed from user id\n" +msgstr " 将从用户 id 中移除前缀 %s\n" + +#: fetchmail.c:1874 +msgid " No prefix stripping\n" +msgstr " 没有要从用户 id 中清除的前缀\n" + +#: fetchmail.c:1881 +msgid " Predeclared mailserver aliases:" +msgstr " 预先声明的邮件服务器昵称: " + +#: fetchmail.c:1890 +msgid " Local domains:" +msgstr " 本地域:" + +#: fetchmail.c:1900 +#, c-format +msgid " Connection must be through interface %s.\n" +msgstr " 必须通过地址 %s 连接\n" + +#: fetchmail.c:1902 +msgid " No interface requirement specified.\n" +msgstr " 未指定地址要求。\n" + +#: fetchmail.c:1904 +#, c-format +msgid " Polling loop will monitor %s.\n" +msgstr " 收件轮循将监听 %s。\n" + +#: fetchmail.c:1906 +msgid " No monitor interface specified.\n" +msgstr " 未指定监听地址。\n" + +#: fetchmail.c:1910 +#, c-format +msgid " Server connections will be made via plugin %s (--plugin %s).\n" +msgstr " 通过外部程序 %s 进行服务器连接 (--plugin %s)。\n" + +#: fetchmail.c:1912 +msgid " No plugin command specified.\n" +msgstr " 未指定外部程序。\n" + +#: fetchmail.c:1914 +#, c-format +msgid " Listener connections will be made via plugout %s (--plugout %s).\n" +msgstr " 通过外部程序 %s 进行 SMTP 连接(--plugout %s)。\n" + +#: fetchmail.c:1916 +msgid " No plugout command specified.\n" +msgstr " 未指定外部程序。\n" + +#: fetchmail.c:1921 +msgid " No UIDs saved from this host.\n" +msgstr " 未从此主机上保存 UIDs。\n" + +#: fetchmail.c:1930 +#, c-format +msgid " %d UIDs saved.\n" +msgstr " 保存了 %d 个UIDs。\n" + +#: fetchmail.c:1938 +msgid " Poll trace information will be added to the Received header.\n" +msgstr " 收件跟踪信息将被加入 Received 邮件头。\n" + +#: fetchmail.c:1940 +msgid "" +" No poll trace information will be added to the Received header.\n" +".\n" +msgstr "" +" 无收件跟踪信息要被加入 Received 邮件头。\n" +"。\n" + +#: fetchmail.c:1943 +#, c-format +msgid " Pass-through properties \"%s\".\n" +msgstr " 传送的 properties 选项为 “%s” 。\n" + +#: getpass.c:71 +msgid "ERROR: no support for getpassword() routine\n" +msgstr "错误: 不支持 getpassword() 例程\n" + +#: getpass.c:193 +msgid "" +"\n" +"Caught SIGINT... bailing out.\n" +msgstr "" +"\n" +"遇到信号 SIGINT... 正在退出\n" + +#: gssapi.c:66 +#, c-format +msgid "Couldn't get service name for [%s]\n" +msgstr "无法获得服务 [%s]\n" + +#: gssapi.c:72 +#, c-format +msgid "Using service name [%s]\n" +msgstr "正在使用服务 [%s]\n" + +#: gssapi.c:89 +msgid "Sending credentials\n" +msgstr "正在发送证书\n" + +#: gssapi.c:107 +msgid "Error exchanging credentials\n" +msgstr "交换证书时出错\n" + +#: gssapi.c:152 +msgid "Couldn't unwrap security level data\n" +msgstr "无法解开加密数据\n" + +#: gssapi.c:157 +msgid "Credential exchange complete\n" +msgstr "证书交换完成\n" + +#: gssapi.c:161 +msgid "Server requires integrity and/or privacy\n" +msgstr "服务器要求完整性和(或)隐私检查\n" + +#: gssapi.c:170 +#, c-format +msgid "Unwrapped security level flags: %s%s%s\n" +msgstr "解开的加密标识: %s%s%s\n" + +#: gssapi.c:174 +#, c-format +msgid "Maximum GSS token size is %ld\n" +msgstr "最大 GSS 标识大小为 %ld\n" + +#: gssapi.c:187 +msgid "Error creating security level request\n" +msgstr "创建加密请求时出错\n" + +#: gssapi.c:198 +msgid "Releasing GSS credentials\n" +msgstr "正在清空 GSS 证书\n" + +#: gssapi.c:201 +msgid "Error releasing credentials\n" +msgstr "清空证书时出错\n" + +#: idle.c:61 +#, c-format +msgid "fetchmail: thread sleeping for %d sec.\n" +msgstr "fetchmail: 线程休眠 %d 秒。\n" + +#: imap.c:326 +msgid "Protocol identified as IMAP4 rev 1\n" +msgstr "协议被识别为 IMAP4 版本 1\n" + +#: imap.c:332 +msgid "Protocol identified as IMAP4 rev 0\n" +msgstr "协议被识别为 IMAP4 版本 0\n" + +#: imap.c:339 +msgid "Protocol identified as IMAP2 or IMAP2BIS\n" +msgstr "协议被识别为 IMAP2 或 IMAP2BIS\n" + +#: imap.c:354 +msgid "will idle after poll\n" +msgstr "收件后恢复至 idle 模式\n" + +#: imap.c:441 pop3.c:505 +#, c-format +msgid "%s: upgrade to TLS succeeded.\n" +msgstr "%s: 成功升级至 TLS 协议。\n" + +#: imap.c:450 pop3.c:514 +#, c-format +msgid "%s: upgrade to TLS failed.\n" +msgstr "%s: 升级至 TLS 协议失败。\n" + +#: imap.c:454 +#, fuzzy, c-format +msgid "%s: opportunistic upgrade to TLS failed, trying to continue\n" +msgstr "%s: 升级至 TLS 失败，继续尝试\n" + +#: imap.c:565 +msgid "Required OTP capability not compiled into fetchmail\n" +msgstr "需要的 OTP 功能未被编译进 fetchmail\n" + +#: imap.c:587 pop3.c:380 +msgid "Required NTLM capability not compiled into fetchmail\n" +msgstr "需要的 NTLM 功能未被编译进 fetchmail\n" + +#: imap.c:596 +msgid "Required LOGIN capability not supported by server\n" +msgstr "需要的 LOGIN 功能未被编译进 fetchmail\n" + +#: imap.c:662 +#, c-format +msgid "mail expunge mismatch (%d actual != %d expected)\n" +msgstr "邮件删除数不相等 (实际删除 %d 封!= 已删除 %d 封)\n" + +#: imap.c:768 imap.c:827 +msgid "re-poll failed\n" +msgstr "重新收件失败\n" + +#: imap.c:776 imap.c:832 +#, c-format +msgid "%d message waiting after re-poll\n" +msgid_plural "%d messages waiting after re-poll\n" +msgstr[0] "重新收件后又有 %d 封邮件等待收取\n" + +#: imap.c:793 +msgid "mailbox selection failed\n" +msgstr "邮箱选择失败\n" + +#: imap.c:797 +#, c-format +msgid "%d message waiting after first poll\n" +msgid_plural "%d messages waiting after first poll\n" +msgstr[0] "首次收件后又有 %d 封邮件等待收取\n" + +#: imap.c:811 +msgid "expunge failed\n" +msgstr "删除操作失败\n" + +#: imap.c:815 +#, c-format +msgid "%d message waiting after expunge\n" +msgid_plural "%d messages waiting after expunge\n" +msgstr[0] "删除操作后有 %d 封邮件等待收取\n" + +#: imap.c:857 +msgid "search for unseen messages failed\n" +msgstr "查找未读邮件失败\n" + +#: imap.c:885 +#, c-format +msgid "%lu is unseen\n" +msgstr "%lu 封未读\n" + +#: imap.c:897 pop3.c:876 +#, c-format +msgid "%u is first unseen\n" +msgstr "%u 是首个未读邮件\n" + +#: imap.c:988 +msgid "Warning: ignoring bogus data for message sizes returned by the server.\n" +msgstr "警告: 忽略服务器返回的邮件大小的无效数据。\n" + +#: interface.c:256 +msgid "Unable to open kvm interface. Make sure fetchmail is SGID kmem." +msgstr "无法打开 kvm 接口。确保 fetchmail 是 SGID kmem" + +#: interface.c:396 +#, c-format +msgid "Unable to parse interface name from %s" +msgstr "无法从 %s 分析得出地址名" + +#: interface.c:418 +msgid "get_ifinfo: sysctl (iflist estimate) failed" +msgstr "get_ifinfo: sysctl (iflist 测试) 失败" + +#: interface.c:424 +msgid "get_ifinfo: malloc failed" +msgstr "get_ifinfo: malloc 失败" + +#: interface.c:430 +msgid "get_ifinfo: sysctl (iflist) failed" +msgstr "get_ifinfo: sysctl (iflist) 失败" + +#: interface.c:448 +#, c-format +msgid "Routing message version %d not understood." +msgstr "未知的路径信息版本 %d。" + +#: interface.c:480 +#, c-format +msgid "No interface found with name %s" +msgstr "未找到以 %s 命名的网卡" + +#: interface.c:538 +#, c-format +msgid "No IP address found for %s" +msgstr "未找到 %s 的 IP 地址" + +#: interface.c:589 +msgid "missing IP interface address\n" +msgstr "未找到 IP 地址\n" + +#: interface.c:605 +msgid "invalid IP interface address\n" +msgstr "无效的 IP 地址\n" + +#: interface.c:611 +msgid "invalid IP interface mask\n" +msgstr "无效的 IP 地址掩码\n" + +#: interface.c:650 +#, c-format +msgid "activity on %s -noted- as %d\n" +msgstr "%s 的活跃度为 %d\n" + +#: interface.c:665 +#, c-format +msgid "skipping poll of %s, %s down\n" +msgstr "跳过 %s 收件，%s 关闭了\n" + +#: interface.c:684 +#, c-format +msgid "skipping poll of %s, %s IP address excluded\n" +msgstr "跳过 %s 收件，拒绝接受 %s 的 IP 地址\n" + +#: interface.c:696 +#, c-format +msgid "activity on %s checked as %d\n" +msgstr "%s 的活跃度查为 %d\n" + +#: interface.c:722 +#, c-format +msgid "skipping poll of %s, %s inactive\n" +msgstr "跳过 %s 收件，%s 未开启\n" + +#: interface.c:729 +#, c-format +msgid "activity on %s was %d, is %d\n" +msgstr "%s 的活跃度以前是 %d，现在是 %d\n" + +#: kerberos.c:74 +msgid "could not decode initial BASE64 challenge\n" +msgstr "无法解码起始部分的 BASE64 编码请求\n" + +#: kerberos.c:139 +#, c-format +msgid "principal %s in ticket does not match -u %s\n" +msgstr "证书中的验证方 %s 与 -u 选项中的 %s 不匹配\n" + +#: kerberos.c:147 +#, c-format +msgid "non-null instance (%s) might cause strange behavior\n" +msgstr "非空情况 (%s) 可能导致奇怪的行为\n" + +#: kerberos.c:213 +msgid "could not decode BASE64 ready response\n" +msgstr "无法解码 BASE64 ready 响应\n" + +#: kerberos.c:220 +msgid "challenge mismatch\n" +msgstr "请求不匹配\n" + +#: lock.c:86 +#, c-format +msgid "fetchmail: error reading lockfile \"%s\": %s\n" +msgstr "fetchmail: 读取锁文件 “%s” 时发生错误: %s\n" + +#: lock.c:97 +msgid "fetchmail: removing stale lockfile\n" +msgstr "fetchmail: 正在删除过时的锁文件\n" + +#: lock.c:121 +#, c-format +msgid "fetchmail: error opening lockfile \"%s\": %s\n" +msgstr "fetchmail: 打开锁文件 “%s” 时发生错误: %s\n" + +#: lock.c:168 +msgid "fetchmail: lock creation failed.\n" +msgstr "fetchmail: 锁文件创建失败。\n" + +#: netrc.c:219 +#, c-format +msgid "%s:%d: warning: found \"%s\" before any host names\n" +msgstr "%s:%d: 警告: 在任意主机名前发现 “%s”\n" + +#: netrc.c:257 +#, c-format +msgid "%s:%d: warning: unknown token \"%s\"\n" +msgstr "%s:%d: 警告: 未知标识“%s”\n" + +#: odmr.c:66 +#, c-format +msgid "%s's SMTP listener does not support ATRN\n" +msgstr "%s 的 SMTP 端不支持 ATRN\n" + +#: odmr.c:104 +msgid "Turnaround now...\n" +msgstr "正在转向 ...\n" + +#: odmr.c:109 +msgid "ATRN request refused.\n" +msgstr "拒绝 ATRN 请求\n" + +#: odmr.c:113 +msgid "Unable to process ATRN request now\n" +msgstr "现在无法处理 ATRN 请求\n" + +#: odmr.c:118 +msgid "You have no mail.\n" +msgstr "您没有邮件\n" + +#: odmr.c:122 +msgid "Command not implemented\n" +msgstr "指令未执行\n" + +#: odmr.c:126 +msgid "Authentication required.\n" +msgstr "要求验证\n" + +#: odmr.c:130 +#, c-format +msgid "Unknown ODMR error %d\n" +msgstr "未知的 ODMR 错误 %d\n" + +#: odmr.c:189 +msgid "receiving message data\n" +msgstr "正在接收邮件数据\n" + +#: odmr.c:242 +msgid "Option --keep is not supported with ODMR\n" +msgstr "ODMR 不支持 --keep 选项\n" + +#: odmr.c:246 +msgid "Option --flush is not supported with ODMR\n" +msgstr "ODMR 不支持 --flush 选项\n" + +#: odmr.c:250 +msgid "Option --folder is not supported with ODMR\n" +msgstr "ODMR 不支持 --folder 选项\n" + +#: odmr.c:254 +msgid "Option --check is not supported with ODMR\n" +msgstr "ODMR 不支持 --check 选项\n" + +#: opie.c:42 +msgid "server recv fatal\n" +msgstr "服务器 recv 错\n" + +#: opie.c:56 +msgid "Could not decode OTP challenge\n" +msgstr "无法解码 OTP 请求\n" + +#: opie.c:64 pop3.c:597 +msgid "Secret pass phrase: " +msgstr "密码短语:" + +#: options.c:166 options.c:210 +#, c-format +msgid "String '%s' is not a valid number string.\n" +msgstr "字符串 ‘%s’不是一个有效的数字串。\n" + +#: options.c:175 +#, c-format +msgid "Value of string '%s' is %s than %d.\n" +msgstr "字符串 ‘%1$s’ 的值比 %3$d %2$s\n" + +#: options.c:176 +msgid "smaller" +msgstr "小" + +#: options.c:176 +msgid "larger" +msgstr "大" + +#: options.c:337 +#, c-format +msgid "Invalid protocol `%s' specified.\n" +msgstr "指定了无效的协议 ‘%s’\n" + +#: options.c:384 +#, c-format +msgid "Invalid authentication `%s' specified.\n" +msgstr "指定了无效的认证方式 ‘%s’\n" + +#: options.c:585 +msgid "usage: fetchmail [options] [server ...]\n" +msgstr "用法: fetchmail [选项] [服务器...]\n" + +#: options.c:586 +msgid " Options are as follows:\n" +msgstr " 以下这些是选项:\n" + +#: options.c:587 +msgid " -?, --help display this option help\n" +msgstr " -?, --help 显示此选项帮助\n" + +#: options.c:588 +msgid " -V, --version display version info\n" +msgstr " -V, --version 显示版本信息\n" + +#: options.c:590 +msgid " -c, --check check for messages without fetching\n" +msgstr " -c, --check 只检查邮件而不收取\n" + +#: options.c:591 +msgid " -s, --silent work silently\n" +msgstr " -s, --silent 运行时不要显示多余信息\n" + +#: options.c:592 +msgid " -v, --verbose work noisily (diagnostic output)\n" +msgstr " -v, --verbose 运行时给出信息 (诊断型的输出)\n" + +#: options.c:593 +msgid " -d, --daemon run as a daemon once per n seconds\n" +msgstr " -d, --daemon 每 n 秒运行后台服务一次\n" + +#: options.c:594 +msgid " -N, --nodetach don't detach daemon process\n" +msgstr " -N, --nodetach 不分离后台进程\n" + +#: options.c:595 +msgid " -q, --quit kill daemon process\n" +msgstr " -q, --quit 终止后台进程\n" + +#: options.c:596 +msgid " -L, --logfile specify logfile name\n" +msgstr " -L, --logfile 指定日志文件名\n" + +#: options.c:597 +msgid " --syslog use syslog(3) for most messages when running as a daemon\n" +msgstr " --syslog 以后台服务运行时用 syslog(3) 得到更多的信息\n" + +#: options.c:598 +msgid " --invisible don't write Received & enable host spoofing\n" +msgstr " --invisible 不写 Received 邮件头并允许伪装主机\n" + +#: options.c:599 +msgid " -f, --fetchmailrc specify alternate run control file\n" +msgstr " -f, --fetchmailrc 指定可选的配置文件\n" + +#: options.c:600 +msgid " -i, --idfile specify alternate UIDs file\n" +msgstr " -i, --idfile 指定可选的 UIDs 文件\n" + +#: options.c:601 +msgid " --pidfile specify alternate PID (lock) file\n" +msgstr " --pidfile 指定可选的进程(锁)文件\n" + +#: options.c:602 +msgid " --postmaster specify recipient of last resort\n" +msgstr " --postmaster 指定邮件管理员\n" + +#: options.c:603 +msgid " --nobounce redirect bounces from user to postmaster.\n" +msgstr " --nobounce 将回送邮件从用户重定向至邮件管理员\n" + +#: options.c:605 +msgid " -I, --interface interface required specification\n" +msgstr " -I, --interface 指定网络地址\n" + +#: options.c:606 +msgid " -M, --monitor monitor interface for activity\n" +msgstr " -M, --moniter 监控指定网络地址的活跃度\n" + +#: options.c:609 +msgid " --ssl enable ssl encrypted session\n" +msgstr " --ssl 启用 ssl 加密会话\n" + +#: options.c:610 +msgid " --sslkey ssl private key file\n" +msgstr " --sslkey ssl 私钥文件\n" + +#: options.c:611 +msgid " --sslcert ssl client certificate\n" +msgstr " --sslcert ssl 客户端证书\n" + +#: options.c:612 +msgid " --sslcertck do strict server certificate check (recommended)\n" +msgstr " --sslcertck 进行严格的服务器证书检查(推荐)\n" + +#: options.c:613 +msgid " --sslcertpath path to ssl certificates\n" +msgstr " --sslcertpath ssl 证书目录\n" + +#: options.c:614 +msgid " --sslfingerprint fingerprint that must match that of the server's cert.\n" +msgstr " --sslfingerprint 指定一个指纹，它必须与服务器证书的指纹匹配\n" + +#: options.c:615 +msgid " --sslproto force ssl protocol (SSL2/SSL3/TLS1)\n" +msgstr " --sslproto 指定强制使用的 ssl 协议(SSL2/SSL3/TLS1)\n" + +#: options.c:617 +msgid " --plugin specify external command to open connection\n" +msgstr " --plugin 指定外部程序打开连接\n" + +#: options.c:618 +msgid " --plugout specify external command to open smtp connection\n" +msgstr " --plugout 指定外部程序打开 smtp 连接\n" + +#: options.c:620 +msgid " -p, --protocol specify retrieval protocol (see man page)\n" +msgstr " -p, --protocol 指定收件协议 (看 man 手册页)\n" + +#: options.c:621 +msgid " -U, --uidl force the use of UIDLs (pop3 only)\n" +msgstr " -U, --uidl 强制使用 UIDLs(仅适用于 pop3)\n" + +#: options.c:622 +msgid " --port TCP port to connect to (obsolete, use --service)\n" +msgstr " --port 要连接的 TCP 端口(过时了，用 --service)\n" + +#: options.c:623 +msgid " -P, --service TCP service to connect to (can be numeric TCP port)\n" +msgstr " -P, --service 要连接的 TCP 服务(允许用 TCP 端口的数值来表示)\n" + +#: options.c:624 +msgid " --auth authentication type (password/kerberos/ssh/otp)\n" +msgstr " --auth 指定验证方式(password/kerberos/ssh/otp)\n" + +#: options.c:625 +msgid " -t, --timeout server nonresponse timeout\n" +msgstr " -t, --timeout 指定服务器超时无响应的时间\n" + +#: options.c:626 +msgid " -E, --envelope envelope address header\n" +msgstr " -E, --envelope 指定邮件地址头\n" + +#: options.c:627 +msgid " -Q, --qvirtual prefix to remove from local user id\n" +msgstr " -Q, --qvirtual 从当前用户移除前缀\n" + +#: options.c:628 +msgid " --principal mail service principal\n" +msgstr "--principal 邮件服务验证方\n" + +#: options.c:629 +msgid " --tracepolls add poll-tracing information to Received header\n" +msgstr " --tracepolls Received 邮件头中添加收件跟踪信息\n" + +#: options.c:631 +msgid " -u, --username specify users's login on server\n" +msgstr " -u, --username 指定登录服务器的用户名\n" + +#: options.c:632 +msgid " -a, --[fetch]all retrieve old and new messages\n" +msgstr " -a, --[fetch]all 收取所有新旧邮件\n" + +#: options.c:633 +msgid " -K, --nokeep delete new messages after retrieval\n" +msgstr " -K, --nokeep 收件后删除服务器上新邮件\n" + +#: options.c:634 +msgid " -k, --keep save new messages after retrieval\n" +msgstr " -k, --keep 收件后保留服务器上新邮件\n" + +#: options.c:635 +msgid " -F, --flush delete old messages from server\n" +msgstr " -F, --flush 从服务器上删除旧邮件\n" + +#: options.c:636 +msgid " --limitflush delete oversized messages\n" +msgstr " --limitflush 删除超大的邮件\n" + +#: options.c:637 +msgid " -n, --norewrite don't rewrite header addresses\n" +msgstr " -n, --norewrite 不要重写地址头\n" + +#: options.c:638 +msgid " -l, --limit don't fetch messages over given size\n" +msgstr " -l, --limit 不收超过指定大小的邮件\n" + +#: options.c:639 +msgid " -w, --warnings interval between warning mail notification\n" +msgstr " -w, --warnings 邮件通知警告的间隔\n" + +#: options.c:641 +msgid " -S, --smtphost set SMTP forwarding host\n" +msgstr " -S, --smtphost 设置 SMTP 转发主机\n" + +#: options.c:642 +msgid " --fetchdomains fetch mail for specified domains\n" +msgstr " --fetchdomains 收取指定域的邮件\n" + +#: options.c:643 +msgid " -D, --smtpaddress set SMTP delivery domain to use\n" +msgstr " -D, --smtpaddress 设置 SMTP 投递域\n" + +#: options.c:644 +msgid " --smtpname set SMTP full name username@domain\n" +msgstr " --smtpname 设置 SMTP 全名，用户名@域\n" + +#: options.c:645 +msgid " -Z, --antispam, set antispam response values\n" +msgstr " -Z, --antispam, 设置 antispam 响应值\n" + +#: options.c:646 +msgid " -b, --batchlimit set batch limit for SMTP connections\n" +msgstr " -b, --bathlimit 为 SMTP 连接设置批量处理限制\n" + +#: options.c:647 +msgid " -B, --fetchlimit set fetch limit for server connections\n" +msgstr " -B, --fetchlimit 为服务器连接设置收取限制\n" + +#: options.c:648 +msgid " --fetchsizelimit set fetch message size limit\n" +msgstr " --fetchsizelimit 设置收件大小限制\n" + +#: options.c:649 +msgid " --fastuidl do a binary search for UIDLs\n" +msgstr " --fastuidl 对 UIDLs 进行折半查找\n" + +#: options.c:650 +msgid " -e, --expunge set max deletions between expunges\n" +msgstr " -e, --expunge 设置删除操作发生在多少封邮件之后\n" + +#: options.c:651 +msgid " -m, --mda set MDA to use for forwarding\n" +msgstr " -m, --mda 设置用于转发的 MDA\n" + +#: options.c:652 +msgid " --bsmtp set output BSMTP file\n" +msgstr " --bsmtp 设置 BSMTP 文件输出\n" + +#: options.c:653 +msgid " --lmtp use LMTP (RFC2033) for delivery\n" +msgstr " --lmtp 用 LMTP 协议(RFC2033) 投递邮件\n" + +#: options.c:654 +msgid " -r, --folder specify remote folder name\n" +msgstr " -r, --folder 指定远程邮箱名\n" + +#: options.c:655 +msgid " --showdots show progress dots even in logfiles\n" +msgstr " --showdots 即使在日志文件中也要显示进度条(以点的形式)\n" + +#: pop3.c:350 +msgid "Warning: \"Maillennium POP3/PROXY server\" found, using RETR command instead of TOP.\n" +msgstr "警告: 发现“ POP3 代理服务器”，用 RETR 命令代替 TOP。\n" + +#: pop3.c:449 +msgid "TLS is mandatory for this session, but server refused CAPA command.\n" +msgstr "强制使用 TLS 会话，但服务器拒绝 CAPA 命令。\n" + +#: pop3.c:450 +msgid "The CAPA command is however necessary for TLS.\n" +msgstr "而 CPAC 命令对于 TLS 协议来说是必须要有的。\n" + +#: pop3.c:525 +#, c-format +msgid "%s: opportunistic upgrade to TLS failed, trying to continue.\n" +msgstr "%s: 升级到 TLS 协议失败了，继续尝试。\n" + +#: pop3.c:633 +msgid "We've run out of allowed authenticators and cannot continue.\n" +msgstr "我们已经用完了可用的验证方式，无法继续\n" + +#: pop3.c:647 +msgid "Required APOP timestamp not found in greeting\n" +msgstr "在 greeting 中未发现所需的 APOP 时间戳\n" + +#: pop3.c:656 +msgid "Timestamp syntax error in greeting\n" +msgstr "greeting 中时间戳语法错误\n" + +#: pop3.c:672 +msgid "Invalid APOP timestamp.\n" +msgstr "无效的 APOP 时间戳\n" + +#: pop3.c:696 +msgid "Undefined protocol request in POP3_auth\n" +msgstr "POP3_auth 中有未定义的协议请求\n" + +#: pop3.c:717 +msgid "lock busy! Is another session active?\n" +msgstr "死锁！是否有另一个会话在运行？\n" + +#: pop3.c:796 +msgid "Cannot handle UIDL response from upstream server.\n" +msgstr "无法操作来自上游服务器的 UIDL 响应。\n" + +#: pop3.c:819 +msgid "Server responded with UID for wrong message.\n" +msgstr "响应的服务器带有错误消息的 UID。\n" + +#: pop3.c:846 pop3.c:1092 +#, c-format +msgid "id=%s (num=%d) was deleted, but is still present!\n" +msgstr "id = %s (数量 = %d 封) 已被删除，但仍然存在！\n" + +#: pop3.c:855 pop3.c:867 pop3.c:1101 pop3.c:1108 +#, c-format +msgid "%u is unseen\n" +msgstr "%u 未读\n" + +#: pop3.c:952 +msgid "Messages inserted into list on server. Cannot handle this.\n" +msgstr "邮件被插入服务器列表。无法处理。\n" + +#: pop3.c:1044 +msgid "protocol error\n" +msgstr "协议错\n" + +#: pop3.c:1060 +msgid "protocol error while fetching UIDLs\n" +msgstr "正在读取 UIDLs 时协议出错\n" + +#: pop3.c:1430 +msgid "Option --folder is not supported with POP3\n" +msgstr "POP3 不支持 --folder 选项\n" + +#: rcfile_y.y:124 +msgid "server option after user options" +msgstr "服务器选项在用户选项后" + +#: rcfile_y.y:167 +msgid "SDPS not enabled." +msgstr "SDPS 不可用" + +#: rcfile_y.y:213 +msgid "fetchmail: interface option is only supported under Linux (without IPv6) and FreeBSD\n" +msgstr "fetchmail: interface 选项只有 Linux(无 IPv6)和 FreeBSD 支持\n" + +#: rcfile_y.y:220 +msgid "fetchmail: monitor option is only supported under Linux (without IPv6) and FreeBSD\n" +msgstr "fetchmail: monitor 选项只有 Linux(无 IPv6)和 FreeBSD 支持\n" + +#: rcfile_y.y:333 +msgid "SSL is not enabled" +msgstr "SSL 不可用" + +#: rcfile_y.y:382 +msgid "end of input" +msgstr "输入结束" + +#: rcfile_y.y:419 +#, c-format +msgid "File %s must be a regular file.\n" +msgstr "文件 %s 必须是个普通文件。\n" + +#: rcfile_y.y:429 +#, c-format +msgid "File %s must have no more than -rwx--x--- (0710) permissions.\n" +msgstr "文件 %s 不能拥有多于 -rwx--x--- (0710) 的权限。\n" + +#: rcfile_y.y:441 +#, c-format +msgid "File %s must be owned by you.\n" +msgstr "文件 %s 必须归您所有。\n" + +#: report.c:77 +msgid "Unknown system error" +msgstr "未知的系统错误" + +#: report.c:104 +#, c-format +msgid "%s (log message incomplete)" +msgstr "%s (日志信息不完整)" + +#: rfc822.c:76 +#, c-format +msgid "About to rewrite %s" +msgstr "正要重写 %s" + +#: rfc822.c:212 +#, c-format +msgid "Rewritten version is %s\n" +msgstr "重写版本为 %s\n" + +#: rpa.c:117 +msgid "Success" +msgstr "成功" + +#: rpa.c:118 +msgid "Restricted user (something wrong with account)" +msgstr "受限用户 (帐号有点问题)" + +#: rpa.c:119 +msgid "Invalid userid or passphrase" +msgstr "无效的用户 id 或是密码短语" + +#: rpa.c:120 +msgid "Deity error" +msgstr "Deity error" + +#: rpa.c:173 +msgid "RPA token 2: Base64 decode error\n" +msgstr "RPA 标识 2: BASE64 解码错误\n" + +#: rpa.c:184 +#, c-format +msgid "Service chose RPA version %d.%d\n" +msgstr "服务选择了 RPA 版本 %d.%d\n" + +#: rpa.c:190 +#, c-format +msgid "Service challenge (l=%d):\n" +msgstr "服务请求 (l=%d):\n" + +#: rpa.c:199 +#, c-format +msgid "Service timestamp %s\n" +msgstr "服务时间戳 %s\n" + +#: rpa.c:204 +msgid "RPA token 2 length error\n" +msgstr "RPA 标识 2 长度错误\n" + +#: rpa.c:208 +#, c-format +msgid "Realm list: %s\n" +msgstr "域列表: %s\n" + +#: rpa.c:212 +msgid "RPA error in service@realm string\n" +msgstr "在“服务@域”字符串中有 RPA 错误\n" + +#: rpa.c:249 +msgid "RPA token 4: Base64 decode error\n" +msgstr "RPA 标识 4: Base64 解码错误\n" + +#: rpa.c:260 +#, c-format +msgid "User authentication (l=%d):\n" +msgstr "用户验证 (l=%d):\n" + +#: rpa.c:274 +#, c-format +msgid "RPA status: %02X\n" +msgstr "RPA 状态: %02X\n" + +#: rpa.c:280 +msgid "RPA token 4 length error\n" +msgstr "RPA 标识 4 长度错误\n" + +#: rpa.c:287 +#, c-format +msgid "RPA rejects you: %s\n" +msgstr "RPA 拒绝您: %s\n" + +#: rpa.c:289 +msgid "RPA rejects you, reason unknown\n" +msgstr "RPA 拒绝您: 原因不明\n" + +#: rpa.c:297 +#, c-format +msgid "RPA User Authentication length error: %d\n" +msgstr "RPA 用户验证长度错误: %d\n" + +#: rpa.c:302 +#, c-format +msgid "RPA Session key length error: %d\n" +msgstr "RPA 会话密钥长度错误: %d\n" + +#: rpa.c:308 +msgid "RPA _service_ auth fail. Spoof server?\n" +msgstr "RPA _service_auth 错误。要伪装服务器吗 ？\n" + +#: rpa.c:313 +msgid "Session key established:\n" +msgstr "创建会话密钥:\n" + +#: rpa.c:344 +msgid "RPA authorisation complete\n" +msgstr "RPA 授权完成\n" + +#: rpa.c:371 +msgid "Get response\n" +msgstr "得到响应\n" + +#: rpa.c:401 +#, c-format +msgid "Get response return %d [%s]\n" +msgstr "得到响应返回 %d [%s]\n" + +#: rpa.c:462 +msgid "Hdr not 60\n" +msgstr "Hdr 非 60\n" + +#: rpa.c:483 +msgid "Token length error\n" +msgstr "标识长度错误\n" + +#: rpa.c:488 +#, c-format +msgid "Token Length %d disagrees with rxlen %d\n" +msgstr "标识长度 %d 不同于 rxlen %d\n" + +#: rpa.c:494 +msgid "Mechanism field incorrect\n" +msgstr "机制域错误\n" + +#: rpa.c:530 +#, c-format +msgid "dec64 error at char %d: %x\n" +msgstr "字符 %d 处有 deb64 错误: %x\n" + +#: rpa.c:545 +msgid "Inbound binary data:\n" +msgstr "收到的二进制数据:\n" + +#: rpa.c:581 +msgid "Outbound data:\n" +msgstr "送出数据:\n" + +#: rpa.c:644 +msgid "RPA String too long\n" +msgstr "RPA 字串太长\n" + +#: rpa.c:649 +msgid "Unicode:\n" +msgstr "Unicode:\n" + +#: rpa.c:708 +msgid "RPA Failed open of /dev/urandom. This shouldn't\n" +msgstr "打开 /dev/urandom 时 RPA 失败。这应该不\n" + +#: rpa.c:709 +msgid " prevent you logging in, but means you\n" +msgstr "影响您登入，但意味着您\n" + +#: rpa.c:710 +msgid " cannot be sure you are talking to the\n" +msgstr "无法确认您正在与\n" + +#: rpa.c:711 +msgid " service that you think you are (replay\n" +msgstr "您想要的服务对话。可能您正被一个虚假的服务\n" + +#: rpa.c:712 +msgid " attacks by a dishonest service are possible.)\n" +msgstr "进行回放操作，即受到攻击\n" + +#: rpa.c:723 +msgid "User challenge:\n" +msgstr "用户请求:\n" + +#: rpa.c:873 +msgid "MD5 being applied to data block:\n" +msgstr "数据块使用了 MD5:\n" + +#: rpa.c:886 +msgid "MD5 result is: \n" +msgstr "MD5 值: \n" + +#: servport.c:53 +#, c-format +msgid "getaddrinfo(NULL, \"%s\") error: %s\n" +msgstr "getaddrinfo(NULL, “%s”) 错误: %s\n" + +#: servport.c:80 +#, c-format +msgid "Cannot resolve service %s to port number.\n" +msgstr "无法将服务 %s 解析为端口号\n" + +#: servport.c:81 +msgid "Please specify the service as decimal port number.\n" +msgstr "请把服务指定为十进制的端口号\n" + +#: sink.c:220 +#, c-format +msgid "forwarding to %s\n" +msgstr "正在转发至 %s\n" + +#: sink.c:306 +msgid "SMTP: (bounce-message body)\n" +msgstr "SMTP: (回送邮件内容)\n" + +#: sink.c:309 +#, c-format +msgid "mail from %s bounced to %s\n" +msgstr "邮件从 %s 回送至 %s\n" + +#: sink.c:442 +#, c-format +msgid "Saved error is still %d\n" +msgstr "保留的错误仍然为 %d\n" + +#: sink.c:502 sink.c:587 +#, c-format +msgid "%cMTP error: %s\n" +msgstr "%cMTP 出错: %s\n" + +#: sink.c:712 +#, c-format +msgid "BSMTP file open failed: %s\n" +msgstr "打开 BSMTP 文件失败: %s\n" + +#: sink.c:758 +msgid "BSMTP preamble write failed.\n" +msgstr "写入 BSMTP 报头失败。\n" + +#: sink.c:972 +#, fuzzy, c-format +msgid "%cMTP listener doesn't like recipient address `%s'\n" +msgstr "%cMTP 端不喜欢收件人地址 “%s”\n" + +#: sink.c:979 +#, fuzzy, c-format +msgid "%cMTP listener doesn't really like recipient address `%s'\n" +msgstr "%cMTP 端不是真的喜欢收件人地址 “%s”\n" + +#: sink.c:1025 +msgid "no address matches; no postmaster set.\n" +msgstr "无匹配的地址；也无 postmaster 设置\n" + +#: sink.c:1037 +#, c-format +msgid "can't even send to %s!\n" +msgstr "无法稳定发送至 %s！\n" + +#: sink.c:1043 +#, c-format +msgid "no address matches; forwarding to %s.\n" +msgstr "无匹配的地址；转发至 %s。\n" + +#: sink.c:1199 +#, c-format +msgid "about to deliver with: %s\n" +msgstr "即将用 %s 投递\n" + +#: sink.c:1223 +msgid "MDA open failed\n" +msgstr "打开 MDA 失败\n" + +#: sink.c:1260 +#, c-format +msgid "%cMTP connect to %s failed\n" +msgstr "%cMTP 连接至 %s 失败\n" + +#: sink.c:1284 +#, c-format +msgid "can't raise the listener; falling back to %s" +msgstr "无法启动 MDA 代理；正在转到 MDA 代理 %s" + +#: sink.c:1346 +#, c-format +msgid "Error writing to MDA: %s\n" +msgstr "写入 MDA 时出错: %s\n" + +#: sink.c:1349 +#, c-format +msgid "MDA died of signal %d\n" +msgstr "MDA 被信号 %d 终止\n" + +#: sink.c:1352 +#, c-format +msgid "MDA returned nonzero status %d\n" +msgstr "MDA 返回非零值 %d\n" + +#: sink.c:1355 +#, c-format +msgid "Strange: MDA pclose returned %d and errno %d/%s, cannot handle at %s:%d\n" +msgstr "奇怪: MDA pclose 返回 %d 且 errno 为 %d/%s，在 %s:%d 无法处理\n" + +#: sink.c:1377 +msgid "Message termination or close of BSMTP file failed\n" +msgstr "邮件终止或 BSMTP 文件关闭失败\n" + +#: sink.c:1399 +msgid "SMTP listener refused delivery\n" +msgstr "SMTP 端拒绝投递\n" + +#: sink.c:1429 +msgid "LMTP delivery error on EOM\n" +msgstr "邮件结尾时用 LTMP 协议投递错误\n" + +#: sink.c:1432 +#, c-format +msgid "Unexpected non-503 response to LMTP EOM: %s\n" +msgstr "邮件结尾时 LMTP 协议的未知的非 503 响应: %s\n" + +#: sink.c:1587 +msgid "" +"-- \n" +"The Fetchmail Daemon" +msgstr "" +"-- \n" +"Fetchmail 后台服务" + +#: smtp.c:79 +msgid "ESMTP CRAM-MD5 Authentication...\n" +msgstr "ESMTP CRAM-MD5 验证...\n" + +#: smtp.c:86 smtp.c:137 +msgid "Server rejected the AUTH command.\n" +msgstr "服务器拒绝 AUTH 命令。\n" + +#: smtp.c:94 smtp.c:144 smtp.c:154 smtp.c:160 +msgid "Bad base64 reply from server.\n" +msgstr "来自服务器的错误的 base64 响应。\n" + +#: smtp.c:98 +#, c-format +msgid "Challenge decoded: %s\n" +msgstr "请求解码: %s\n" + +#: smtp.c:115 +msgid "ESMTP PLAIN Authentication...\n" +msgstr "ESMTP PLAIN 验证...\n" + +#: smtp.c:130 +msgid "ESMTP LOGIN Authentication...\n" +msgstr "ESMTP LOGIN 验证...\n" + +#: smtp.c:331 smtp.c:354 +msgid "smtp listener protocol error\n" +msgstr "smtp 端协议错误\n" + +#: socket.c:114 socket.c:140 +msgid "fetchmail: malloc failed\n" +msgstr "fetchmail: malloc 失败\n" + +#: socket.c:172 +msgid "fetchmail: socketpair failed\n" +msgstr "fetchmail: socketpair 失败\n" + +#: socket.c:178 +msgid "fetchmail: fork failed\n" +msgstr "fetchmail: fork 失败\n" + +#: socket.c:185 +msgid "dup2 failed\n" +msgstr "dup2 失败\n" + +#: socket.c:191 +#, c-format +msgid "running %s (host %s service %s)\n" +msgstr "正在运行 %s (主机 %s 服务 %s)\n" + +#: socket.c:194 +#, c-format +msgid "execvp(%s) failed\n" +msgstr "execvp(%s) 失败\n" + +#: socket.c:282 +#, c-format +msgid "getaddrinfo(\"%s\",\"%s\") error: %s\n" +msgstr "getaddrinfo(“%s”，“%s”) 错误: %s\n" + +#: socket.c:285 +msgid "Try adding the --service option (see also FAQ item R12).\n" +msgstr "试着加入 --service 选项(参见 FAQ 条目 R12)。\n" + +#: socket.c:296 socket.c:299 +#, c-format +msgid "unknown (%s)" +msgstr "未知 (%s)" + +#: socket.c:302 +#, c-format +msgid "Trying to connect to %s/%s..." +msgstr "正在尝试连接至 %s/%s..." + +#: socket.c:310 +#, c-format +msgid "cannot create socket: %s\n" +msgstr "无法创建套接字: %s\n" + +#: socket.c:326 +msgid "connection failed.\n" +msgstr "连接失败。\n" + +#: socket.c:328 +#, c-format +msgid "connection to %s:%s [%s/%s] failed: %s.\n" +msgstr "连接至 %s:%s [%s/%s] 失败: %s。\n" + +#: socket.c:334 +msgid "connected.\n" +msgstr "已连接。\n" + +#: socket.c:660 +#, c-format +msgid "Issuer Organization: %s\n" +msgstr "发行组织: %s\n" + +#: socket.c:662 +msgid "Warning: Issuer Organization Name too long (possibly truncated).\n" +msgstr "警告: 发行组织名字太长 (可能截短)。\n" + +#: socket.c:664 +msgid "Unknown Organization\n" +msgstr "未知的组织\n" + +#: socket.c:666 +#, c-format +msgid "Issuer CommonName: %s\n" +msgstr "发行者通用名: %s\n" + +#: socket.c:668 +msgid "Warning: Issuer CommonName too long (possibly truncated).\n" +msgstr "警告: 发行者通用名太长 (可能截短)。\n" + +#: socket.c:670 +msgid "Unknown Issuer CommonName\n" +msgstr "未知的发行者通用名\n" + +#: socket.c:674 +#, c-format +msgid "Server CommonName: %s\n" +msgstr "服务器通用名: %s\n" + +#: socket.c:678 +msgid "Bad certificate: Subject CommonName too long!\n" +msgstr "证书错误: 主通用名太长!\n" + +#: socket.c:724 +#, c-format +msgid "Server CommonName mismatch: %s != %s\n" +msgstr "服务器通用名不匹配: %s != %s\n" + +#: socket.c:730 +msgid "Server name not set, could not verify certificate!\n" +msgstr "未设置服务器名称，无法验证证书！\n" + +#: socket.c:735 +msgid "Unknown Server CommonName\n" +msgstr "未知的服务器通用名\n" + +#: socket.c:737 +msgid "Server name not specified in certificate!\n" +msgstr "服务器名称未在证书中指定！\n" + +#: socket.c:749 +msgid "EVP_md5() failed!\n" +msgstr "EVP_md5() 失败！\n" + +#: socket.c:753 +msgid "Out of memory!\n" +msgstr "超出内存！\n" + +#: socket.c:761 +msgid "Digest text buffer too small!\n" +msgstr "Digest 文本缓冲区太小！\n" + +#: socket.c:767 +#, c-format +msgid "%s key fingerprint: %s\n" +msgstr "%s 密钥指纹: %s\n" + +#: socket.c:771 +#, c-format +msgid "%s fingerprints match.\n" +msgstr "%s 指纹匹配。\n" + +#: socket.c:773 +#, c-format +msgid "%s fingerprints do not match!\n" +msgstr "%s 指纹不匹配！\n" + +#: socket.c:782 +#, c-format +msgid "Server certificate verification error: %s\n" +msgstr "服务器证书验证错误: %s\n" + +#: socket.c:788 +#, c-format +msgid "unknown issuer (first %d characters): %s\n" +msgstr "未知的发行者 (前 %d 个字符): %s\n" + +#: socket.c:875 +msgid "File descriptor out of range for SSL" +msgstr "文件描述符超出 SSL 的范围" + +#: socket.c:891 +#, c-format +msgid "Invalid SSL protocol '%s' specified, using default (SSLv23).\n" +msgstr "指定了无效的 SSL 协议 ‘%s’，将用默认的协议(SSLv23)代替。\n" + +#: socket.c:964 +msgid "Certificate/fingerprint verification was somehow skipped!\n" +msgstr "证书(指纹)验证被不明原因地跳过！\n" + +#: socket.c:1042 +msgid "Cygwin socket read retry\n" +msgstr "重试读取 Cygwin 接口\n" + +#: socket.c:1045 +msgid "Cygwin socket read retry failed!\n" +msgstr "重试读取 Cygwin 接口失败！\n" + +#: transact.c:67 +#, c-format +msgid "mapped address %s to local %s\n" +msgstr "地址 %s 被映射至本地 %s\n" + +#: transact.c:89 +#, c-format +msgid "mapped %s to local %s\n" +msgstr "映射 %s 至本地 %s\n" + +#: transact.c:156 +#, c-format +msgid "passed through %s matching %s\n" +msgstr "传送过来的 %s 正与 %s 进行比较\n" + +#: transact.c:226 +#, c-format +msgid "" +"analyzing Received line:\n" +"%s" +msgstr "" +"正在分析 Received 行:\n" +"%s" + +#: transact.c:265 +#, c-format +msgid "line accepted, %s is an alias of the mailserver\n" +msgstr "收到的行中 %s 是邮件服务器的一个昵称\n" + +#: transact.c:271 +#, c-format +msgid "line rejected, %s is not an alias of the mailserver\n" +msgstr "拒收的行中 %s 非邮件服务器的昵称\n" + +#: transact.c:345 +msgid "no Received address found\n" +msgstr "找不到 Received 地址\n" + +#: transact.c:354 +#, c-format +msgid "found Received address `%s'\n" +msgstr "找到 Received 地址 ‘%s’\n" + +#: transact.c:551 +msgid "message delimiter found while scanning headers\n" +msgstr "查找邮件头时发现邮件分隔符\n" + +#: transact.c:582 +msgid "incorrect header line found while scanning headers\n" +msgstr "查找邮件头时发现不正确的行\n" + +#: transact.c:584 +#, c-format +msgid "line: %s" +msgstr "行: %s" + +#: transact.c:1130 +#, c-format +msgid "no local matches, forwarding to %s\n" +msgstr "无本地匹配的收件人，正在转发至 %s\n" + +#: transact.c:1145 +msgid "forwarding and deletion suppressed due to DNS errors\n" +msgstr "正在转发且由于 DNS 错误，删除被取消了\n" + +#: transact.c:1255 +msgid "writing RFC822 msgblk.headers\n" +msgstr "正在重写 RFC822 协议中定义的邮件信息块的头部\n" + +#: transact.c:1273 +msgid "no recipient addresses matched declared local names" +msgstr "收件人地址与本地已知的用户名不匹配" + +#: transact.c:1280 +#, c-format +msgid "recipient address %s didn't match any local name" +msgstr "收到人地址 %s 与本地任何一个用户名均不匹配" + +#: transact.c:1289 +msgid "message has embedded NULs" +msgstr "邮件嵌入了 NULs" + +#: transact.c:1297 +msgid "SMTP listener rejected local recipient addresses: " +msgstr "SMTP 端拒绝本地收件人地址:" + +#: transact.c:1445 +msgid "error writing message text\n" +msgstr "在写邮件文本时出错\n" + +#: uid.c:250 +#, c-format +msgid "Old UID list from %s:" +msgstr "来自 %s 的旧 UID 列表:" + +#: uid.c:255 uid.c:266 uid.c:523 uid.c:573 +msgid " <empty>" +msgstr " <空>" + +#: uid.c:262 +msgid "Scratch list of UIDs:" +msgstr "抓取 UIDs 列表:" + +#: uid.c:517 uid.c:569 +#, c-format +msgid "Merged UID list from %s:" +msgstr "从 %s 合并 UID 列表:" + +#: uid.c:519 +#, c-format +msgid "New UID list from %s:" +msgstr "来自 %s 的新 UID 列表:" + +#: uid.c:548 +msgid "swapping UID lists\n" +msgstr "正在转储 UID 列表\n" + +#: uid.c:556 +msgid "not swapping UID lists, no UIDs seen this query\n" +msgstr "不转储 UID 列表，本次查寻无 UIDs 读取\n" + +#: uid.c:581 +msgid "discarding new UID list\n" +msgstr "正在撤消新的 UID 列表\n" + +#: uid.c:616 +msgid "Deleting fetchids file.\n" +msgstr "正在删除 fetchids 文件\n" + +#: uid.c:618 +#, c-format +msgid "Error deleting %s: %s\n" +msgstr "删除 %s 时出错: %s\n" + +#: uid.c:624 +msgid "Writing fetchids file.\n" +msgstr "正在写入 fetchids 文件。\n" + +#: uid.c:643 +#, c-format +msgid "Error writing to fetchids file %s, old file left in place.\n" +msgstr "写入 fetchids 文件 %s 时出错，存在旧文件。\n" + +#: uid.c:647 +#, c-format +msgid "Cannot rename fetchids file %s to %s: %s\n" +msgstr "无法将 fetchids 文件 %s 重命名为 %s: %s\n" + +#: uid.c:651 +#, c-format +msgid "Cannot open fetchids file %s for writing: %s\n" +msgstr "无法打开 fetchids 文件 %s 写入: %s\n" + +#: xmalloc.c:33 +msgid "malloc failed\n" +msgstr "malloc 失败\n" + +#: xmalloc.c:47 +msgid "realloc failed\n" +msgstr "realloc 失败\n" |