fetchmail - [fork] set imap idle timeout to 600s, some servers don't follow rfc recommendations

about summary refs log tree commit diff stats

diff options

Diffstat (limited to 'design-notes.html')

0 files changed, 0 insertions, 0 deletions

'#n62'>62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520

optiboot_atmega328_pro_8MHz.elf:     file format elf32-avr

Sections:
Idx Name          Size      VMA       LMA       File off  Algn
  0 .text         000001ec  00007e00  00007e00  00000054  2**1
                  CONTENTS, ALLOC, LOAD, READONLY, CODE
  1 .debug_aranges 00000028  00000000  00000000  00000240  2**0
                  CONTENTS, READONLY, DEBUGGING
  2 .debug_pubnames 0000006a  00000000  00000000  00000268  2**0
                  CONTENTS, READONLY, DEBUGGING
  3 .debug_info   00000269  00000000  00000000  000002d2  2**0
                  CONTENTS, READONLY, DEBUGGING
  4 .debug_abbrev 00000196  00000000  00000000  0000053b  2**0
                  CONTENTS, READONLY, DEBUGGING
  5 .debug_line   000003d3  00000000  00000000  000006d1  2**0
                  CONTENTS, READONLY, DEBUGGING
  6 .debug_frame  00000090  00000000  00000000  00000aa4  2**2
                  CONTENTS, READONLY, DEBUGGING
  7 .debug_str    00000135  00000000  00000000  00000b34  2**0
                  CONTENTS, READONLY, DEBUGGING
  8 .debug_loc    000001d1  00000000  00000000  00000c69  2**0
                  CONTENTS, READONLY, DEBUGGING
  9 .debug_ranges 00000068  00000000  00000000  00000e3a  2**0
                  CONTENTS, READONLY, DEBUGGING

Disassembly of section .text:

00007e00 <main>:
#ifdef VIRTUAL_BOOT_PARTITION
#define rstVect (*(uint16_t*)(0x204))
#define wdtVect (*(uint16_t*)(0x206))
#endif
/* main program starts here */
int main(void) {
    7e00:	85 e0       	ldi	r24, 0x05	; 5
    7e02:	80 93 81 00 	sts	0x0081, r24
#if LED_START_FLASHES > 0
  // Set up Timer 1 for timeout counter
  TCCR1B = _BV(CS12) | _BV(CS10); // div 1024
#endif
#ifndef SOFT_UART
  UCSR0A = _BV(U2X0); //Double speed mode USART0
    7e06:	82 e0       	ldi	r24, 0x02	; 2
    7e08:	80 93 c0 00 	sts	0x00C0, r24
  UCSR0B = _BV(RXEN0) | _BV(TXEN0);
    7e0c:	88 e1       	ldi	r24, 0x18	; 24
    7e0e:	80 93 c1 00 	sts	0x00C1, r24
  UCSR0C = _BV(UCSZ00) | _BV(UCSZ01);
    7e12:	86 e0       	ldi	r24, 0x06	; 6
    7e14:	80 93 c2 00 	sts	0x00C2, r24
  UBRR0L = (uint8_t)( (F_CPU + BAUD_RATE * 4L) / (BAUD_RATE * 8L) - 1 );
    7e18:	88 e0       	ldi	r24, 0x08	; 8
    7e1a:	80 93 c4 00 	sts	0x00C4, r24
#endif

  // Adaboot no-wait mod
  ch = MCUSR;
    7e1e:	84 b7       	in	r24, 0x34	; 52
  MCUSR = 0;
    7e20:	14 be       	out	0x34, r1	; 52
  if (!(ch & _BV(EXTRF))) appStart();
    7e22:	81 ff       	sbrs	r24, 1
    7e24:	d0 d0       	rcall	.+416    	; 0x7fc6 <appStart>

  // Set up watchdog to trigger after 500ms
  watchdogConfig(WATCHDOG_500MS);
    7e26:	8d e0       	ldi	r24, 0x0D	; 13
    7e28:	c8 d0       	rcall	.+400    	; 0x7fba <watchdogConfig>

  /* Set LED pin as output */
  LED_DDR |= _BV(LED);
    7e2a:	25 9a       	sbi	0x04, 5	; 4
    7e2c:	86 e0       	ldi	r24, 0x06	; 6
}

#if LED_START_FLASHES > 0
void flash_led(uint8_t count) {
  do {
    TCNT1 = -(F_CPU/(1024*16));
    7e2e:	28 e1       	ldi	r18, 0x18	; 24
    7e30:	3e ef       	ldi	r19, 0xFE	; 254
    TIFR1 = _BV(TOV1);
    7e32:	91 e0       	ldi	r25, 0x01	; 1
}

#if LED_START_FLASHES > 0
void flash_led(uint8_t count) {
  do {
    TCNT1 = -(F_CPU/(1024*16));
    7e34:	30 93 85 00 	sts	0x0085, r19
    7e38:	20 93 84 00 	sts	0x0084, r18
    TIFR1 = _BV(TOV1);
    7e3c:	96 bb       	out	0x16, r25	; 22
    while(!(TIFR1 & _BV(TOV1)));
    7e3e:	b0 9b       	sbis	0x16, 0	; 22
    7e40:	fe cf       	rjmp	.-4      	; 0x7e3e <main+0x3e>
    LED_PIN |= _BV(LED);
    7e42:	1d 9a       	sbi	0x03, 5	; 3
  return getch();
}

// Watchdog functions. These are only safe with interrupts turned off.
void watchdogReset() {
  __asm__ __volatile__ (
    7e44:	a8 95       	wdr
    TCNT1 = -(F_CPU/(1024*16));
    TIFR1 = _BV(TOV1);
    while(!(TIFR1 & _BV(TOV1)));
    LED_PIN |= _BV(LED);
    watchdogReset();
  } while (--count);
    7e46:	81 50       	subi	r24, 0x01	; 1
    7e48:	a9 f7       	brne	.-22     	; 0x7e34 <main+0x34>
    /* get character from UART */
    ch = getch();

    if(ch == STK_GET_PARAMETER) {
      // GET PARAMETER returns a generic 0x03 reply - enough to keep Avrdude happy
      getNch(1);
    7e4a:	dd 24       	eor	r13, r13
    7e4c:	d3 94       	inc	r13
        boot_page_fill((uint16_t)(void*)addrPtr,a);
        addrPtr += 2;
      } while (--ch);
      
      // Write from programming buffer
      boot_page_write((uint16_t)(void*)address);
    7e4e:	a5 e0       	ldi	r26, 0x05	; 5
    7e50:	ea 2e       	mov	r14, r26
      boot_spm_busy_wait();

#if defined(RWWSRE)
      // Reenable read access to flash
      boot_rww_enable();
    7e52:	f1 e1       	ldi	r31, 0x11	; 17
    7e54:	ff 2e       	mov	r15, r31
#endif

  /* Forever loop */
  for (;;) {
    /* get character from UART */
    ch = getch();
    7e56:	a4 d0       	rcall	.+328    	; 0x7fa0 <getch>

    if(ch == STK_GET_PARAMETER) {
    7e58:	81 34       	cpi	r24, 0x41	; 65
    7e5a:	21 f4       	brne	.+8      	; 0x7e64 <main+0x64>
      // GET PARAMETER returns a generic 0x03 reply - enough to keep Avrdude happy
      getNch(1);
    7e5c:	81 e0       	ldi	r24, 0x01	; 1
    7e5e:	be d0       	rcall	.+380    	; 0x7fdc <verifySpace+0xc>
      putch(0x03);
    7e60:	83 e0       	ldi	r24, 0x03	; 3
    7e62:	24 c0       	rjmp	.+72     	; 0x7eac <main+0xac>
    }
    else if(ch == STK_SET_DEVICE) {
    7e64:	82 34       	cpi	r24, 0x42	; 66
    7e66:	11 f4       	brne	.+4      	; 0x7e6c <main+0x6c>
      // SET DEVICE is ignored
      getNch(20);
    7e68:	84 e1       	ldi	r24, 0x14	; 20
    7e6a:	03 c0       	rjmp	.+6      	; 0x7e72 <main+0x72>
    }
    else if(ch == STK_SET_DEVICE_EXT) {
    7e6c:	85 34       	cpi	r24, 0x45	; 69
    7e6e:	19 f4       	brne	.+6      	; 0x7e76 <main+0x76>
      // SET DEVICE EXT is ignored
      getNch(5);
    7e70:	85 e0       	ldi	r24, 0x05	; 5
    7e72:	b4 d0       	rcall	.+360    	; 0x7fdc <verifySpace+0xc>
    7e74:	8a c0       	rjmp	.+276    	; 0x7f8a <main+0x18a>
    }
    else if(ch == STK_LOAD_ADDRESS) {
    7e76:	85 35       	cpi	r24, 0x55	; 85
    7e78:	a1 f4       	brne	.+40     	; 0x7ea2 <main+0xa2>
      // LOAD ADDRESS
      address = getch();
    7e7a:	92 d0       	rcall	.+292    	; 0x7fa0 <getch>
    7e7c:	08 2f       	mov	r16, r24
    7e7e:	10 e0       	ldi	r17, 0x00	; 0
    7e80:	10 93 01 02 	sts	0x0201, r17
    7e84:	00 93 00 02 	sts	0x0200, r16
      address = (address & 0xff) | (getch() << 8);
    7e88:	8b d0       	rcall	.+278    	; 0x7fa0 <getch>
    7e8a:	90 e0       	ldi	r25, 0x00	; 0
    7e8c:	98 2f       	mov	r25, r24
    7e8e:	88 27       	eor	r24, r24
    7e90:	80 2b       	or	r24, r16
    7e92:	91 2b       	or	r25, r17
      address += address; // Convert from word address to byte address
    7e94:	88 0f       	add	r24, r24
    7e96:	99 1f       	adc	r25, r25
    7e98:	90 93 01 02 	sts	0x0201, r25
    7e9c:	80 93 00 02 	sts	0x0200, r24
    7ea0:	73 c0       	rjmp	.+230    	; 0x7f88 <main+0x188>
      verifySpace();
    }
    else if(ch == STK_UNIVERSAL) {
    7ea2:	86 35       	cpi	r24, 0x56	; 86
    7ea4:	29 f4       	brne	.+10     	; 0x7eb0 <main+0xb0>
      // UNIVERSAL command is ignored
      getNch(4);
    7ea6:	84 e0       	ldi	r24, 0x04	; 4
    7ea8:	99 d0       	rcall	.+306    	; 0x7fdc <verifySpace+0xc>
      putch(0x00);
    7eaa:	80 e0       	ldi	r24, 0x00	; 0
    7eac:	71 d0       	rcall	.+226    	; 0x7f90 <putch>
    7eae:	6d c0       	rjmp	.+218    	; 0x7f8a <main+0x18a>
    }
    /* Write memory, length is big endian and is in bytes  */
    else if(ch == STK_PROG_PAGE) {
    7eb0:	84 36       	cpi	r24, 0x64	; 100
    7eb2:	09 f0       	breq	.+2      	; 0x7eb6 <main+0xb6>
    7eb4:	43 c0       	rjmp	.+134    	; 0x7f3c <main+0x13c>
      // PROGRAM PAGE - we support flash programming only, not EEPROM
      uint8_t *bufPtr;
      uint16_t addrPtr;

      getLen();
    7eb6:	7c d0       	rcall	.+248    	; 0x7fb0 <getLen>

      // Immediately start page erase - this will 4.5ms
      boot_page_erase((uint16_t)(void*)address);
    7eb8:	e0 91 00 02 	lds	r30, 0x0200
    7ebc:	f0 91 01 02 	lds	r31, 0x0201
    7ec0:	83 e0       	ldi	r24, 0x03	; 3
    7ec2:	80 93 57 00 	sts	0x0057, r24
    7ec6:	e8 95       	spm
    7ec8:	c0 e0       	ldi	r28, 0x00	; 0
    7eca:	d1 e0       	ldi	r29, 0x01	; 1

      // While that is going on, read in page contents
      bufPtr = buff;
      do *bufPtr++ = getch();
    7ecc:	69 d0       	rcall	.+210    	; 0x7fa0 <getch>
    7ece:	89 93       	st	Y+, r24
      while (--length);
    7ed0:	80 91 02 02 	lds	r24, 0x0202
    7ed4:	81 50       	subi	r24, 0x01	; 1
    7ed6:	80 93 02 02 	sts	0x0202, r24
    7eda:	88 23       	and	r24, r24
    7edc:	b9 f7       	brne	.-18     	; 0x7ecc <main+0xcc>

      // Read command terminator, start reply
      verifySpace();
    7ede:	78 d0       	rcall	.+240    	; 0x7fd0 <verifySpace>
      
      // If only a partial page is to be programmed, the erase might not be complete.
      // So check that here
      boot_spm_busy_wait();
    7ee0:	07 b6       	in	r0, 0x37	; 55
    7ee2:	00 fc       	sbrc	r0, 0
    7ee4:	fd cf       	rjmp	.-6      	; 0x7ee0 <main+0xe0>
      }
#endif

      // Copy buffer into programming buffer
      bufPtr = buff;
      addrPtr = (uint16_t)(void*)address;
    7ee6:	40 91 00 02 	lds	r20, 0x0200
    7eea:	50 91 01 02 	lds	r21, 0x0201
    7eee:	a0 e0       	ldi	r26, 0x00	; 0
    7ef0:	b1 e0       	ldi	r27, 0x01	; 1
      ch = SPM_PAGESIZE / 2;
      do {
        uint16_t a;
        a = *bufPtr++;
    7ef2:	2c 91       	ld	r18, X
    7ef4:	30 e0       	ldi	r19, 0x00	; 0
        a |= (*bufPtr++) << 8;
    7ef6:	11 96       	adiw	r26, 0x01	; 1
    7ef8:	8c 91       	ld	r24, X
    7efa:	11 97       	sbiw	r26, 0x01	; 1
    7efc:	90 e0       	ldi	r25, 0x00	; 0
    7efe:	98 2f       	mov	r25, r24
    7f00:	88 27       	eor	r24, r24
    7f02:	82 2b       	or	r24, r18
    7f04:	93 2b       	or	r25, r19
#ifdef VIRTUAL_BOOT_PARTITION
#define rstVect (*(uint16_t*)(0x204))
#define wdtVect (*(uint16_t*)(0x206))
#endif
/* main program starts here */
int main(void) {
    7f06:	12 96       	adiw	r26, 0x02	; 2
      ch = SPM_PAGESIZE / 2;
      do {
        uint16_t a;
        a = *bufPtr++;
        a |= (*bufPtr++) << 8;
        boot_page_fill((uint16_t)(void*)addrPtr,a);
    7f08:	fa 01       	movw	r30, r20
    7f0a:	0c 01       	movw	r0, r24
    7f0c:	d0 92 57 00 	sts	0x0057, r13
    7f10:	e8 95       	spm
    7f12:	11 24       	eor	r1, r1
        addrPtr += 2;
    7f14:	4e 5f       	subi	r20, 0xFE	; 254
    7f16:	5f 4f       	sbci	r21, 0xFF	; 255
      } while (--ch);
    7f18:	f1 e0       	ldi	r31, 0x01	; 1
    7f1a:	a0 38       	cpi	r26, 0x80	; 128
    7f1c:	bf 07       	cpc	r27, r31
    7f1e:	49 f7       	brne	.-46     	; 0x7ef2 <main+0xf2>
      
      // Write from programming buffer
      boot_page_write((uint16_t)(void*)address);
    7f20:	e0 91 00 02 	lds	r30, 0x0200
    7f24:	f0 91 01 02 	lds	r31, 0x0201
    7f28:	e0 92 57 00 	sts	0x0057, r14
    7f2c:	e8 95       	spm
      boot_spm_busy_wait();
    7f2e:	07 b6       	in	r0, 0x37	; 55
    7f30:	00 fc       	sbrc	r0, 0
    7f32:	fd cf       	rjmp	.-6      	; 0x7f2e <main+0x12e>

#if defined(RWWSRE)
      // Reenable read access to flash
      boot_rww_enable();
    7f34:	f0 92 57 00 	sts	0x0057, r15
    7f38:	e8 95       	spm
    7f3a:	27 c0       	rjmp	.+78     	; 0x7f8a <main+0x18a>
#endif

    }
    /* Read memory block mode, length is big endian.  */
    else if(ch == STK_READ_PAGE) {
    7f3c:	84 37       	cpi	r24, 0x74	; 116
    7f3e:	b9 f4       	brne	.+46     	; 0x7f6e <main+0x16e>
      // READ PAGE - we only read flash
      getLen();
    7f40:	37 d0       	rcall	.+110    	; 0x7fb0 <getLen>
      verifySpace();
    7f42:	46 d0       	rcall	.+140    	; 0x7fd0 <verifySpace>
        else ch = pgm_read_byte_near(address);
        address++;
        putch(ch);
      } while (--length);
#else
      do putch(pgm_read_byte_near(address++));
    7f44:	e0 91 00 02 	lds	r30, 0x0200
    7f48:	f0 91 01 02 	lds	r31, 0x0201
    7f4c:	31 96       	adiw	r30, 0x01	; 1
    7f4e:	f0 93 01 02 	sts	0x0201, r31
    7f52:	e0 93 00 02 	sts	0x0200, r30
    7f56:	31 97       	sbiw	r30, 0x01	; 1
    7f58:	e4 91       	lpm	r30, Z+
    7f5a:	8e 2f       	mov	r24, r30
    7f5c:	19 d0       	rcall	.+50     	; 0x7f90 <putch>
      while (--length);
    7f5e:	80 91 02 02 	lds	r24, 0x0202
    7f62:	81 50       	subi	r24, 0x01	; 1
    7f64:	80 93 02 02 	sts	0x0202, r24
    7f68:	88 23       	and	r24, r24
    7f6a:	61 f7       	brne	.-40     	; 0x7f44 <main+0x144>
    7f6c:	0e c0       	rjmp	.+28     	; 0x7f8a <main+0x18a>
#endif
    }

    /* Get device signature bytes  */
    else if(ch == STK_READ_SIGN) {
    7f6e:	85 37       	cpi	r24, 0x75	; 117
    7f70:	39 f4       	brne	.+14     	; 0x7f80 <main+0x180>
      // READ SIGN - return what Avrdude wants to hear
      verifySpace();
    7f72:	2e d0       	rcall	.+92     	; 0x7fd0 <verifySpace>
      putch(SIGNATURE_0);
    7f74:	8e e1       	ldi	r24, 0x1E	; 30
    7f76:	0c d0       	rcall	.+24     	; 0x7f90 <putch>
      putch(SIGNATURE_1);
    7f78:	85 e9       	ldi	r24, 0x95	; 149
    7f7a:	0a d0       	rcall	.+20     	; 0x7f90 <putch>
      putch(SIGNATURE_2);
    7f7c:	8f e0       	ldi	r24, 0x0F	; 15
    7f7e:	96 cf       	rjmp	.-212    	; 0x7eac <main+0xac>
    }
    else if (ch == 'Q') {
    7f80:	81 35       	cpi	r24, 0x51	; 81
    7f82:	11 f4       	brne	.+4      	; 0x7f88 <main+0x188>
      // Adaboot no-wait mod
      watchdogConfig(WATCHDOG_16MS);
    7f84:	88 e0       	ldi	r24, 0x08	; 8
    7f86:	19 d0       	rcall	.+50     	; 0x7fba <watchdogConfig>
      verifySpace();
    }
    else {
      // This covers the response to commands like STK_ENTER_PROGMODE
      verifySpace();
    7f88:	23 d0       	rcall	.+70     	; 0x7fd0 <verifySpace>
    }
    putch(STK_OK);
    7f8a:	80 e1       	ldi	r24, 0x10	; 16
    7f8c:	01 d0       	rcall	.+2      	; 0x7f90 <putch>
    7f8e:	63 cf       	rjmp	.-314    	; 0x7e56 <main+0x56>

00007f90 <putch>:
  }
}

void putch(char ch) {
    7f90:	98 2f       	mov	r25, r24
#ifndef SOFT_UART
  while (!(UCSR0A & _BV(UDRE0)));
    7f92:	80 91 c0 00 	lds	r24, 0x00C0
    7f96:	85 ff       	sbrs	r24, 5
    7f98:	fc cf       	rjmp	.-8      	; 0x7f92 <putch+0x2>
  UDR0 = ch;
    7f9a:	90 93 c6 00 	sts	0x00C6, r25
      [uartBit] "I" (UART_TX_BIT)
    :
      "r25"
  );
#endif
}
    7f9e:	08 95       	ret

00007fa0 <getch>:
  return getch();
}

// Watchdog functions. These are only safe with interrupts turned off.
void watchdogReset() {
  __asm__ __volatile__ (
    7fa0:	a8 95       	wdr
      [uartBit] "I" (UART_RX_BIT)
    :
      "r25"
);
#else
  while(!(UCSR0A & _BV(RXC0)));
    7fa2:	80 91 c0 00 	lds	r24, 0x00C0
    7fa6:	87 ff       	sbrs	r24, 7
    7fa8:	fc cf       	rjmp	.-8      	; 0x7fa2 <getch+0x2>
  ch = UDR0;
    7faa:	80 91 c6 00 	lds	r24, 0x00C6
#ifdef LED_DATA_FLASH
  LED_PIN |= _BV(LED);
#endif

  return ch;
}
    7fae:	08 95       	ret

00007fb0 <getLen>:
  } while (--count);
}
#endif

uint8_t getLen() {
  getch();
    7fb0:	f7 df       	rcall	.-18     	; 0x7fa0 <getch>
  length = getch();
    7fb2:	f6 df       	rcall	.-20     	; 0x7fa0 <getch>
    7fb4:	80 93 02 02 	sts	0x0202, r24
  return getch();
}
    7fb8:	f3 cf       	rjmp	.-26     	; 0x7fa0 <getch>

00007fba <watchdogConfig>:
    "wdr\n"
  );
}

void watchdogConfig(uint8_t x) {
  WDTCSR = _BV(WDCE) | _BV(WDE);
    7fba:	e0 e6       	ldi	r30, 0x60	; 96
    7fbc:	f0 e0       	ldi	r31, 0x00	; 0
    7fbe:	98 e1       	ldi	r25, 0x18	; 24
    7fc0:	90 83       	st	Z, r25
  WDTCSR = x;
    7fc2:	80 83       	st	Z, r24
}
    7fc4:	08 95       	ret

00007fc6 <appStart>:

void appStart() {
  watchdogConfig(WATCHDOG_OFF);
    7fc6:	80 e0       	ldi	r24, 0x00	; 0
    7fc8:	f8 df       	rcall	.-16     	; 0x7fba <watchdogConfig>
  __asm__ __volatile__ (
    7fca:	ee 27       	eor	r30, r30
    7fcc:	ff 27       	eor	r31, r31
    7fce:	09 94       	ijmp

00007fd0 <verifySpace>:
  do getch(); while (--count);
  verifySpace();
}

void verifySpace() {
  if (getch() != CRC_EOP) appStart();
    7fd0:	e7 df       	rcall	.-50     	; 0x7fa0 <getch>
    7fd2:	80 32       	cpi	r24, 0x20	; 32
    7fd4:	09 f0       	breq	.+2      	; 0x7fd8 <verifySpace+0x8>
    7fd6:	f7 df       	rcall	.-18     	; 0x7fc6 <appStart>
  putch(STK_INSYNC);
    7fd8:	84 e1       	ldi	r24, 0x14	; 20
}
    7fda:	da cf       	rjmp	.-76     	; 0x7f90 <putch>
    ::[count] "M" (UART_B_VALUE)
  );
}
#endif

void getNch(uint8_t count) {
    7fdc:	1f 93       	push	r17
    7fde:	18 2f       	mov	r17, r24

00007fe0 <getNch>:
  do getch(); while (--count);
    7fe0:	df df       	rcall	.-66     	; 0x7fa0 <getch>
    7fe2:	11 50       	subi	r17, 0x01	; 1
    7fe4:	e9 f7       	brne	.-6      	; 0x7fe0 <getNch>
  verifySpace();
    7fe6:	f4 df       	rcall	.-24     	; 0x7fd0 <verifySpace>
}
    7fe8:	1f 91       	pop	r17
    7fea:	08 95       	ret


context:
space:
mode: