diff options
| -rw-r--r-- | fetchmail-FAQ.html | 4568 |
1 files changed, 2479 insertions, 2089 deletions
diff --git a/fetchmail-FAQ.html b/fetchmail-FAQ.html index c21a4ffc..c8ccd63e 100644 --- a/fetchmail-FAQ.html +++ b/fetchmail-FAQ.html @@ -1,196 +1,301 @@ -<!doctype HTML public "-//W3O//DTD W3 HTML 3.2//EN"> -<HTML> -<HEAD> -<TITLE>The Fetchmail FAQ</TITLE> -<link rev=made href="mailto:esr@thyrsus.com"> -<meta name="description" content="Frequently asked questions about fetchmail."> -<meta name="keywords" content="fetchmail, POP, POP2, POP3, IMAP, remote mail"> -</HEAD> -<BODY> -<table width="100%" cellpadding=0><tr> -<td width="30%">Back to <a href="index.html">Fetchmail Home Page</a> -<td width="30%" align=center>To <a href="/~esr/sitemap.html">Site Map</a> -<td width="30%" align=right>$Date: 2002/07/10 13:56:19 $ +<?xml version="1.0" encoding="ISO-8859-1"?> +<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" + "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> +<html xmlns="http://www.w3.org/1999/xhtml"> +<head> +<meta name="generator" +content="HTML Tidy for Linux/x86 (vers 1st February 2002), see www.w3.org" /> +<title>The Fetchmail FAQ</title> +<link rev="made" href="mailto:esr@thyrsus.com" /> +<meta name="description" +content="Frequently asked questions about fetchmail." /> +<meta name="keywords" +content="fetchmail, POP, POP2, POP3, IMAP, remote mail" /> +</head> +<body> +<table width="100%" cellpadding="0" summary="Canned page footer"> +<tr> +<td width="30%">Back to <a href="index.html">Fetchmail Home +Page</a></td> +<td width="30%" align="center">To <a href="/~esr/sitemap.html">Site +Map</a></td> +<td width="30%" align="right">$Date: 2002/07/30 13:26:48 $</td> +</tr> </table> -<HR> -<H1>Frequently Asked Questions About Fetchmail</H1> -<p>Before reporting any bug, please read <a href="#G3">G3</a> for advice -on how to include diagnostic information that will get your bug fixed -as quickly as possible. </p> +<hr /> +<h1>Frequently Asked Questions About Fetchmail</h1> + +<p>Before reporting any bug, please read <a href="#G3">G3</a> for +advice on how to include diagnostic information that will get your +bug fixed as quickly as possible.</p> <p>If you have a question or answer you think ought to be added to -this FAQ list, mail it to fetchmail's maintainer, Eric S. Raymond, at -<A HREF="mailto:esr@thyrsus.com">esr@thyrsus.com</A>.</p> +this FAQ list, mail it to fetchmail's maintainer, Eric S. Raymond, +at <a href="mailto:esr@thyrsus.com">esr@thyrsus.com</a>.</p> <h1>General questions:</h1> -<a href="#G1">G1. What is fetchmail and why should I bother?</a><br> -<a href="#G2">G2. Where do I find the latest FAQ and fetchmail sources?</a><br> -<a href="#G3">G3. I think I've found a bug. Will you fix it?</a><br> -<a href="#G4">G4. I have this idea for a neat feature. Will you add it?</a><br> -<a href="#G5">G5. I want to make fetchmail behave like Outlook Express.</a><br> -<a href="#G6">G6. Is there a mailing list for exchanging tips?</a><br> -<a href="#G7">G7. So, what's this I hear about a fetchmail paper?</a><br> -<a href="#G8">G8. What is the best server to use with fetchmail?</a><br> -<a href="#G9">G9. What is the best mail program to use with fetchmail?</a><br> -<a href="#G10">G10. How can I avoid sending my password en clair?</a><br> -<a href="#G11">G11. Is any special configuration needed to use a dynamic -IP address?</a><br> -<a href="#G12">G12. Is any special configuration needed to use firewalls?</a><br> -<a href="#G13">G13. Is any special configuration needed to <em>send</em> mail?</a><br> -<a href="#G14">G14. Is fetchmail Y2K-compliant?</a><br> -<a href="#G15">G15. Is there a way in fetchmail to support disconnected IMAP mode?</a><br> -<a href="#G16">G16. How will fetchmail perform under heavy loads?</a><br> +<a href="#G1">G1. What is fetchmail and why should I +bother?</a><br /> +<a href="#G2">G2. Where do I find the latest FAQ and fetchmail +sources?</a><br /> +<a href="#G3">G3. I think I've found a bug. Will you fix +it?</a><br /> +<a href="#G4">G4. I have this idea for a neat feature. Will you add +it?</a><br /> +<a href="#G5">G5. I want to make fetchmail behave like Outlook +Express.</a><br /> +<a href="#G6">G6. Is there a mailing list for exchanging +tips?</a><br /> +<a href="#G7">G7. So, what's this I hear about a fetchmail +paper?</a><br /> +<a href="#G8">G8. What is the best server to use with +fetchmail?</a><br /> +<a href="#G9">G9. What is the best mail program to use with +fetchmail?</a><br /> +<a href="#G10">G10. How can I avoid sending my password en +clair?</a><br /> +<a href="#G11">G11. Is any special configuration needed to use a +dynamic IP address?</a><br /> +<a href="#G12">G12. Is any special configuration needed to use +firewalls?</a><br /> +<a href="#G13">G13. Is any special configuration needed to +<em>send</em> mail?</a><br /> +<a href="#G14">G14. Is fetchmail Y2K-compliant?</a><br /> +<a href="#G15">G15. Is there a way in fetchmail to support +disconnected IMAP mode?</a><br /> +<a href="#G16">G16. How will fetchmail perform under heavy +loads?</a><br /> + <h1>Build-time problems:</h1> -<a href="#B1">B1. Make coughs and dies when building on FreeBSD.</a><br> -<a href="#B2">B2. Lex bombs out while building the fetchmail lexer.</a><br> -<a href="#B3">B3. I get link failures when I try to build fetchmail.</a><br> -<a href="#B4">B4. I get build failures in the intl directory.</a><br> +<a href="#B1">B1. Make coughs and dies when building on +FreeBSD.</a><br /> +<a href="#B2">B2. Lex bombs out while building the fetchmail +lexer.</a><br /> +<a href="#B3">B3. I get link failures when I try to build +fetchmail.</a><br /> +<a href="#B4">B4. I get build failures in the intl +directory.</a><br /> + <h1>Fetchmail configuration file grammar questions:</h1> -<a href="#F1">F1. Why does my old .fetchmailrc no longer work?</a><br> -<a href="#F2">F2. The .fetchmailrc parser won't accept my all-numeric user name.</a><br> -<a href="#F3">F3. The .fetchmailrc parser won't accept my host or username beginning with `no'.</a><br> -<a href="#F4">F4. I'm getting a `parse error' message I don't understand.</a><br> +<a href="#F1">F1. Why does my old .fetchmailrc no longer +work?</a><br /> +<a href="#F2">F2. The .fetchmailrc parser won't accept my +all-numeric user name.</a><br /> +<a href="#F3">F3. The .fetchmailrc parser won't accept my host or +username beginning with `no'.</a><br /> +<a href="#F4">F4. I'm getting a `parse error' message I don't +understand.</a><br /> + <h1>Configuration questions:</h1> -<a href="#C1">C1. Why do I need a .fetchmailrc when running as root on my own machine?</a><br> -<a href="#C2">C2. How can I arrange for a fetchmail daemon to get killed when I log out?</a><br> -<a href="#C3">C3. How do I know what interface and address to use with --interface?</a><br> -<a href="#C4">C4. How can I set up support for sendmail's anti-spam features?</a><br> -<a href="#C5">C5. How can I poll some of my mailboxes more/less often than others?</a><br> -<a href="#C6">C6. Fetchmail works OK started up manually, but not from an init script.</a><br> -<a href="#C7">C7. How can I forward mail to another host?.</a><br> +<a href="#C1">C1. Why do I need a .fetchmailrc when running as root +on my own machine?</a><br /> +<a href="#C2">C2. How can I arrange for a fetchmail daemon to get +killed when I log out?</a><br /> +<a href="#C3">C3. How do I know what interface and address to use +with --interface?</a><br /> +<a href="#C4">C4. How can I set up support for sendmail's anti-spam +features?</a><br /> +<a href="#C5">C5. How can I poll some of my mailboxes more/less +often than others?</a><br /> +<a href="#C6">C6. Fetchmail works OK started up manually, but not +from an init script.</a><br /> +<a href="#C7">C7. How can I forward mail to another +host?.</a><br /> + <h1>How to make fetchmail play nice with various MTAs:</h1> -<a href="#T1">T1. How can I use fetchmail with sendmail?</a><br> -<a href="#T2">T2. How can I use fetchmail with qmail?</a><br> -<a href="#T3">T3. How can I use fetchmail with exim?</a><br> -<a href="#T4">T4. How can I use fetchmail with smail?</a><br> -<a href="#T5">T5. How can I use fetchmail with SCO's MMDF?</a><br> -<a href="#T6">T6. How can I use fetchmail with Lotus Notes?</a><br> -<a href="#T7">T7. How can I use fetchmail with Courier IMAP?</a><br> +<a href="#T1">T1. How can I use fetchmail with sendmail?</a><br /> +<a href="#T2">T2. How can I use fetchmail with qmail?</a><br /> +<a href="#T3">T3. How can I use fetchmail with exim?</a><br /> +<a href="#T4">T4. How can I use fetchmail with smail?</a><br /> +<a href="#T5">T5. How can I use fetchmail with SCO's +MMDF?</a><br /> +<a href="#T6">T6. How can I use fetchmail with Lotus +Notes?</a><br /> +<a href="#T7">T7. How can I use fetchmail with Courier +IMAP?</a><br /> + <h1>How to make fetchmail work with various servers:</h1> -<a href="#S1">S1. How can I use fetchmail with qpopper?</a><br> -<a href="#S2">S2. How can I use fetchmail with Microsoft Exchange?</a><br> -<a href="#S3">S3. How can I use fetchmail with Compuserve RPA?</a><br> -<a href="#S4">S4. How can I use fetchmail with Demon Internet's SDPS?</a><br> -<a href="#S5">S5. How can I use fetchmail with usa.net's servers?</a><br> -<a href="#S6">S6. How can I use fetchmail with HP OpenMail?</a><br> -<a href="#S7">S7. How can I use fetchmail with geocities POP3 servers?</a><br> -<a href="#S8">S8. How can I use fetchmail with Hotmail?</a><br> -<a href="#S9">S9. How can I use fetchmail with MSN?</a><br> -<a href="#S10">S10. How can I use fetchmail with SpryNet?</a><br> -<a href="#S11">S11. How can I use fetchmail with FTGate?</a><br> -<a href="#S12">S12. How can I use fetchmail with MailMax?</a><br> -<a href="#S13">S13. How can I use fetchmail with Novell GroupWise?</a><br> -<a href="#S14">S14. How can I use fetchmail with InterChange?</a><br> -<a href="#S15">S15. How can I use fetchmail with GMX?</a><br> - -<h1>How to set up well-known security and authentication methods:</h1> - -<a href="#K1">K1. How can I use fetchmail with SOCKS?</a><br> -<a href="#K2">K2. How can I use fetchmail with IPv6 and IPsec?</a><br> -<a href="#K3">K3. How can I get fetchmail to work with ssh?</a><br> -<a href="#K4">K4. What do I have to do to use the IMAP-GSS protocol?</a><br> -<a href="#K5">K5. How can I use fetchmail with SSL?</a><br> +<a href="#S1">S1. How can I use fetchmail with qpopper?</a><br /> +<a href="#S2">S2. How can I use fetchmail with Microsoft +Exchange?</a><br /> +<a href="#S3">S3. How can I use fetchmail with Compuserve +RPA?</a><br /> +<a href="#S4">S4. How can I use fetchmail with Demon Internet's +SDPS?</a><br /> +<a href="#S5">S5. How can I use fetchmail with usa.net's +servers?</a><br /> +<a href="#S6">S6. How can I use fetchmail with HP +OpenMail?</a><br /> +<a href="#S7">S7. How can I use fetchmail with geocities POP3 +servers?</a><br /> +<a href="#S8">S8. How can I use fetchmail with Hotmail?</a><br /> +<a href="#S9">S9. How can I use fetchmail with MSN?</a><br /> +<a href="#S10">S10. How can I use fetchmail with SpryNet?</a><br /> +<a href="#S11">S11. How can I use fetchmail with FTGate?</a><br /> +<a href="#S12">S12. How can I use fetchmail with MailMax?</a><br /> +<a href="#S13">S13. How can I use fetchmail with Novell +GroupWise?</a><br /> +<a href="#S14">S14. How can I use fetchmail with +InterChange?</a><br /> +<a href="#S15">S15. How can I use fetchmail with GMX?</a><br /> + + +<h1>How to set up well-known security and authentication +methods:</h1> + +<a href="#K1">K1. How can I use fetchmail with SOCKS?</a><br /> +<a href="#K2">K2. How can I use fetchmail with IPv6 and +IPsec?</a><br /> +<a href="#K3">K3. How can I get fetchmail to work with +ssh?</a><br /> +<a href="#K4">K4. What do I have to do to use the IMAP-GSS +protocol?</a><br /> +<a href="#K5">K5. How can I use fetchmail with SSL?</a><br /> + <h1>Runtime fatal errors:</h1> -<a href="#R1">R1. Fetchmail isn't working, and -v shows `SMTP connect failed' messages.</a><br> -<a href="#R2">R2. When I try to configure an MDA, fetchmail doesn't work.</a><br> -<a href="#R3">R3. Fetchmail dumps core when given an invalid rc file.</a><br> -<a href="#R4">R4. Fetchmail dumps core in -V mode, but operates normally otherwise.</a><br> -<a href="#R5">R5. Running fetchmail in daemon mode doesn't work.</a><br> -<a href="#R6">R6. Fetchmail randomly dies with socket errors.</a><br> -<a href="#R7">R7. Fetchmail running as root stopped working after an OS upgrade</a><br> +<a href="#R1">R1. Fetchmail isn't working, and -v shows `SMTP +connect failed' messages.</a><br /> +<a href="#R2">R2. When I try to configure an MDA, fetchmail doesn't +work.</a><br /> +<a href="#R3">R3. Fetchmail dumps core when given an invalid rc +file.</a><br /> +<a href="#R4">R4. Fetchmail dumps core in -V mode, but operates +normally otherwise.</a><br /> +<a href="#R5">R5. Running fetchmail in daemon mode doesn't +work.</a><br /> +<a href="#R6">R6. Fetchmail randomly dies with socket +errors.</a><br /> +<a href="#R7">R7. Fetchmail running as root stopped working after +an OS upgrade</a><br /> <a href="#R8">R8. Fetchmail is timing out after fetching certain -messages but before deleting them</a><br> -<a href="#R9">R9. Fetchmail is timing out during message fetches</a><br> -<a href="#R10">R10. Fetchmail is dying with SIGPIPE.</a><br> -<a href="#R11">R11. My server is hanging up or emitting errors on CAPA.</a><br> +messages but before deleting them</a><br /> +<a href="#R9">R9. Fetchmail is timing out during message +fetches</a><br /> +<a href="#R10">R10. Fetchmail is dying with SIGPIPE.</a><br /> +<a href="#R11">R11. My server is hanging up or emitting errors on +CAPA.</a><br /> + <h1>Hangs and lockups:</h1> -<a href="#H1">H1. Fetchmail hangs when used with pppd.</a><br> -<a href="#H2">H2. Fetchmail hangs during the MAIL FROM exchange.</a><br> -<a href="#H3">H3. Fetchmail hangs while fetching mail.</a><br> +<a href="#H1">H1. Fetchmail hangs when used with pppd.</a><br /> +<a href="#H2">H2. Fetchmail hangs during the MAIL FROM +exchange.</a><br /> +<a href="#H3">H3. Fetchmail hangs while fetching mail.</a><br /> + <h1>Disappearing mail:</h1> -<a href="#D1">D1. I think I've set up fetchmail correctly, but I'm not getting any mail.</a><br> -<a href="#D2">D2. All my mail seems to disappear after a dropped connection.</a><br> -<a href="#D3">D3. Mail that was being fetched when I interrupted my fetchmail seems to have been vanished.</a><br> +<a href="#D1">D1. I think I've set up fetchmail correctly, but I'm +not getting any mail.</a><br /> +<a href="#D2">D2. All my mail seems to disappear after a dropped +connection.</a><br /> +<a href="#D3">D3. Mail that was being fetched when I interrupted my +fetchmail seems to have been vanished.</a><br /> + <h1>Multidrop-mode problems:</h1> -<a href="#M1">M1. I've declared local names, but all my multidrop mail is going to root anyway.</a><br> -<a href="#M2">M2. I can't seem to get fetchmail to route to a local domain properly.</a><br> -<a href="#M3">M3. I tried to run a mailing list using multidrop, and I have a mail loop!</a><br> -<a href="#M4">M4. My multidrop fetchmail seems to be having DNS problems.</a><br> -<a href="#M5">M5. I'm seeing long DNS delays before each message is processed.</a><br> -<a href="#M6">M6. How do I get multidrop mode to work with majordomo?</a><br> -<a href="#M7">M7. Multidrop mode isn't parsing envelope addresses from -my Received headers as it should.</a><br> -<a href="#M8">M8. Users are getting multiple copies of messages.</a><br> +<a href="#M1">M1. I've declared local names, but all my multidrop +mail is going to root anyway.</a><br /> +<a href="#M2">M2. I can't seem to get fetchmail to route to a local +domain properly.</a><br /> +<a href="#M3">M3. I tried to run a mailing list using multidrop, +and I have a mail loop!</a><br /> +<a href="#M4">M4. My multidrop fetchmail seems to be having DNS +problems.</a><br /> +<a href="#M5">M5. I'm seeing long DNS delays before each message is +processed.</a><br /> +<a href="#M6">M6. How do I get multidrop mode to work with +majordomo?</a><br /> +<a href="#M7">M7. Multidrop mode isn't parsing envelope addresses +from my Received headers as it should.</a><br /> +<a href="#M8">M8. Users are getting multiple copies of +messages.</a><br /> + <h1>Mangled mail:</h1> -<a href="#X1">X1. Spurious blank lines are appearing in the headers of fetched mail.</a><br> -<a href="#X2">X2. My mail client can't see a Subject line.</a><br> -<a href="#X3">X3. Messages containing "From" at start of line are being split.</a><br> -<a href="#X4">X4. My mail is being mangled in a new and different way.</a><br> -<a href="#X5">X5. Using POP3, retrievals seems to be fetching too much!</a><br> -<a href="#X6">X6. My mail attachments are being dropped or mangled.</a><br> -<a href="#X7">X7. Some mail attachments are hanging fetchmail.</a><br> -<a href="#X8">X8. A spurious ) is being appended to my messages.</a><br> +<a href="#X1">X1. Spurious blank lines are appearing in the headers +of fetched mail.</a><br /> +<a href="#X2">X2. My mail client can't see a Subject +line.</a><br /> +<a href="#X3">X3. Messages containing "From" at start of line are +being split.</a><br /> +<a href="#X4">X4. My mail is being mangled in a new and different +way.</a><br /> +<a href="#X5">X5. Using POP3, retrievals seems to be fetching too +much!</a><br /> +<a href="#X6">X6. My mail attachments are being dropped or +mangled.</a><br /> +<a href="#X7">X7. Some mail attachments are hanging +fetchmail.</a><br /> +<a href="#X8">X8. A spurious ) is being appended to my +messages.</a><br /> + <h1>Other problems:</h1> -<a href="#O1">O1. The --logfile option doesn't work if the logfile doesn't exist.</a><br> -<a href="#O2">O2. Every time I get a POP or IMAP message the header is -dumped to all my terminal sessions.</a><br> -<a href="#O3">O3. Does fetchmail reread its rc file every poll cycle?</a><br> +<a href="#O1">O1. The --logfile option doesn't work if the logfile +doesn't exist.</a><br /> +<a href="#O2">O2. Every time I get a POP or IMAP message the header +is dumped to all my terminal sessions.</a><br /> +<a href="#O3">O3. Does fetchmail reread its rc file every poll +cycle?</a><br /> <a href="#O4">O4. Why do deleted messages show up again when I take -a line hit while downloading?</a><br> -<a href="#O5">O5. Why is fetched mail being logged with my name, not the real From address?</a><br> -<a href="#O6">O6. I'm seeing long sendmail delays or hangs near the start of each poll cycle.</a><br> -<a href="#O7">O7. Why doesn't fetchmail deliver mail in date-sorted order?</a><br> -<a href="#O8">O8. I'm using pppd. Why isn't my monitor option working?</a><br> -<a href="#O9">O9. Why does fetchmail keep retrieving the same messages -over and over?</a><br> -<a href="#O10">O10. Why is the received date on all my messages the same?</a><br> +a line hit while downloading?</a><br /> +<a href="#O5">O5. Why is fetched mail being logged with my name, +not the real From address?</a><br /> +<a href="#O6">O6. I'm seeing long sendmail delays or hangs near the +start of each poll cycle.</a><br /> +<a href="#O7">O7. Why doesn't fetchmail deliver mail in date-sorted +order?</a><br /> +<a href="#O8">O8. I'm using pppd. Why isn't my monitor option +working?</a><br /> +<a href="#O9">O9. Why does fetchmail keep retrieving the same +messages over and over?</a><br /> +<a href="#O10">O10. Why is the received date on all my messages the +same?</a><br /> + <h1>Answers:</h1> -<hr> -<h2><a name="G1">G1. What is fetchmail and why should I bother?</a></h2> -<p>Fetchmail is a one-stop solution to the remote mail retrieval problem -for Unix machines, quite useful to anyone with an intermittent PPP or -SLIP connection to a remote mailserver. It can collect mail using any -variant of POP or IMAP and forwards via port 25 to the local SMTP -listener, enabling all the normal forwarding/filtering/aliasing -mechanisms that would apply to local mail or mail arriving via a -full-time TCP/IP connection.</p> +<hr /> +<h2><a id="G1" name="G1">G1. What is fetchmail and why should I +bother?</a></h2> + +<p>Fetchmail is a one-stop solution to the remote mail retrieval +problem for Unix machines, quite useful to anyone with an +intermittent PPP or SLIP connection to a remote mailserver. It can +collect mail using any variant of POP or IMAP and forwards via port +25 to the local SMTP listener, enabling all the normal +forwarding/filtering/aliasing mechanisms that would apply to local +mail or mail arriving via a full-time TCP/IP connection.</p> <p>Fetchmail is not a toy or a coder's learning exercise, but an industrial-strength tool capable of transparently handling every -retrieval demand from those of a simple single-user ISP connection up -to mail retrieval and rerouting for an entire client domain. +retrieval demand from those of a simple single-user ISP connection +up to mail retrieval and rerouting for an entire client domain. Fetchmail is easy to configure, unobtrusive in operation, powerful, feature-rich, and well documented.</p> <p>Fetchmail is <a href="http://www.opensource.org">open-source</a> -software. The openness of the sources is the strongest assurance of -quality you can have. Extensive peer review by a large, +software. The openness of the sources is the strongest assurance of +quality you can have. Extensive peer review by a large, multi-platform user community has shown that fetchmail is as near bulletproof as the underlying protocols permit.</p> @@ -198,531 +303,583 @@ bulletproof as the underlying protocols permit.</p> href="http://gnu.org//copyleft/gpl.html">GNU General Public License</a>.</p> -<p>If you found this FAQ in the distribution, see the README for fetchmail's -full feature list.</p> +<p>If you found this FAQ in the distribution, see the README for +fetchmail's full feature list.</p> -<hr> -<h2><a name="G2">G2. Where do I find the latest FAQ and fetchmail -sources?</a></h2> +<hr /> +<h2><a id="G2" name="G2">G2. Where do I find the latest FAQ and +fetchmail sources?</a></h2> <p>The latest HTML FAQ is available alongside the latest fetchmail -sources at the fetchmail home page: -<a href="http://www.tuxedo.org/~esr/fetchmail"> -http://www.tuxedo.org/~esr/fetchmail</a>. You can also usually find -both in the <a -href="http://sunsite.unc.edu/pub/Linux/system/mail/pop/!INDEX.html">POP -mail tools directory on Sunsite</a>.</p> +sources at the fetchmail home page: <a +href="http://www.tuxedo.org/~esr/fetchmail">http://www.tuxedo.org/~esr/fetchmail</a>. +You can also usually find both in the <a +href="http://sunsite.unc.edu/pub/Linux/system/mail/pop/!INDEX.html"> +POP mail tools directory on Sunsite</a>.</p> <p>A text dump of this FAQ is included in the fetchmail -distribution. Because it freezes at distribution release time, it may -not be completely current.</p> +distribution. Because it freezes at distribution release time, it +may not be completely current.</p> -<hr> -<h2><a name="G3">G3. I think I've found a bug. Will you fix it?</a></h2> +<hr /> +<h2><a id="G3" name="G3">G3. I think I've found a bug. Will you fix +it?</a></h2> -<p>Yes I will, provided you include enough diagnostic information for me -to go on. Send bugs to <a -href="mailto:fetchmail-friends@ccil.org">fetchmail-friends</a>. When reporting -bugs, please include the following:</p> +<p>Yes I will, provided you include enough diagnostic information +for me to go on. Send bugs to <a +href="mailto:fetchmail-friends@ccil.org">fetchmail-friends</a>. +When reporting bugs, please include the following:</p> <ol> -<li>Your operating system. +<li>Your operating system.</li> + <li>Your compiler version, if you built from source; otherwise, the - name and origin of the RPM or other binary package you installed. -<li>A copy of your POP or IMAP server's greeting line. -<li>The name and version of the SMTP listener or MDA you are forwarding to. -<li>Any command-line options you used. +name and origin of the RPM or other binary package you +installed.</li> + +<li>A copy of your POP or IMAP server's greeting line.</li> + +<li>The name and version of the SMTP listener or MDA you are +forwarding to.</li> + +<li>Any command-line options you used.</li> + <li>The output of fetchmail -V called with whatever other - command-line options you used. +command-line options you used.</li> </ol> -<p>If you have FTP access to your remote mail account, and you have any -suspicion that the bug was triggered by a particular message, please -include a copy of the message that triggered the bug.</p> - -<p>Often, the first thing I will do when you report a bug is tell you to -upgrade to the newest version of fetchmail, and then see if the -problem reproduces. So you'll probably save us both time if you -upgrade and test with the latest version <em>before</em> sending in a -bug report.</p> - -<p>If your bug is something that used to work but stopped working when -you upgraded, then you can help pin the bug down by trying <a -href="ftp://ftp.ccil.org/pub/esr/fetchmail/">intermediate versions of -fetchmail</a> until you identify the revision that broke your -feature. The smart way to do this is by binary search on the version -sequence. First, try the version halfway between your last good one -and the current one. If it works, the failure was introduced in the -upper half of the sequence; if it doesn't, the failure was introduced -in the lower half. Now bisect that half in the same way. In a very -few tries, you should be able to identify the exact adjacent pair -of versions between which your bug was introduced -- and with -information like that, I can usually come up with a fix very quickly.</p> - -<p>Another useful thing you can do, if you're using POP3, is to test for -IMAP4 support on your mailserver using the autoprobe function of -fetchmailconf. If you have IMAP4, and fetchmailconf doesn't tell you -it's broken, switch immediately. POP3 is a weak, poorly-designed -protocol with chronic problems, and the later versions after RFC1725 -actually get worse rather than better. Changing over to IMAP4 may well -make your problem go away -- and if your ISP doesn't have IMAP4 -support, bug them to supply it.</p> - -<p>It is helpful if you include your .fetchmailrc file, but not necessary -unless your symptom seems to involve an error in configuration -parsing. If you do send in your .fetchmailrc, mask the passwords -first! </p> - -<p>If fetchmail seems to run and fetch mail, but the headers look mangled -(that is, headers are missing or blank lines are inserted in the -headers) then read the FAQ items in section <a href="#X1">X</a> -before submitting a bug report. Pay special attention to the item on -<a href="#generic_mangling">diagnosing mail mangling</a>. There are -lots of ways for other programs in the mail chain to screw up that -look like fetchmail's fault, but you may be able to fix these by -tweaking your configuration.</p> +<p>If you have FTP access to your remote mail account, and you have +any suspicion that the bug was triggered by a particular message, +please include a copy of the message that triggered the bug.</p> + +<p>Often, the first thing I will do when you report a bug is tell +you to upgrade to the newest version of fetchmail, and then see if +the problem reproduces. So you'll probably save us both time if you +upgrade and test with the latest version <em>before</em> sending in +a bug report.</p> + +<p>If your bug is something that used to work but stopped working +when you upgraded, then you can help pin the bug down by trying <a +href="ftp://ftp.ccil.org/pub/esr/fetchmail/">intermediate versions +of fetchmail</a> until you identify the revision that broke your +feature. The smart way to do this is by binary search on the +version sequence. First, try the version halfway between your last +good one and the current one. If it works, the failure was +introduced in the upper half of the sequence; if it doesn't, the +failure was introduced in the lower half. Now bisect that half in +the same way. In a very few tries, you should be able to identify +the exact adjacent pair of versions between which your bug was +introduced -- and with information like that, I can usually come up +with a fix very quickly.</p> + +<p>Another useful thing you can do, if you're using POP3, is to +test for IMAP4 support on your mailserver using the autoprobe +function of fetchmailconf. If you have IMAP4, and fetchmailconf +doesn't tell you it's broken, switch immediately. POP3 is a weak, +poorly-designed protocol with chronic problems, and the later +versions after RFC1725 actually get worse rather than better. +Changing over to IMAP4 may well make your problem go away -- and if +your ISP doesn't have IMAP4 support, bug them to supply it.</p> + +<p>It is helpful if you include your .fetchmailrc file, but not +necessary unless your symptom seems to involve an error in +configuration parsing. If you do send in your .fetchmailrc, mask +the passwords first!</p> + +<p>If fetchmail seems to run and fetch mail, but the headers look +mangled (that is, headers are missing or blank lines are inserted +in the headers) then read the FAQ items in section <a +href="#X1">X</a> before submitting a bug report. Pay special +attention to the item on <a href="#generic_mangling">diagnosing +mail mangling</a>. There are lots of ways for other programs in the +mail chain to screw up that look like fetchmail's fault, but you +may be able to fix these by tweaking your configuration.</p> <p>A transcript of the failed session with -v -v (yes, that's -<em>two</em> -v options, enabling debug mode) will almost always be useful. -It is very important that the transcript include your POP/IMAP server's -greeting line, so I can identify it in case of server problems. This -transcript will not reveal your passwords, which are specially masked -out precisely so transcripts can be passed around.</p> - -<p>If you upgraded your fetchmail and something broke, you should include -session transcripts with -v -v of both the working and failing -versions. Very often, the source of the problem can instantly -identified by looking at the differences in protocol transactions.</p> - -<p>If the bug involves a core dump or hang, a gdb stack trace is good to have. -(Bear in mind that you can attach gdb to a running but hung process by -giving the process ID as a second argument.) You will need to -reconfigure with:</p> +<em>two</em> -v options, enabling debug mode) will almost always be +useful. It is very important that the transcript include your +POP/IMAP server's greeting line, so I can identify it in case of +server problems. This transcript will not reveal your passwords, +which are specially masked out precisely so transcripts can be +passed around.</p> + +<p>If you upgraded your fetchmail and something broke, you should +include session transcripts with -v -v of both the working and +failing versions. Very often, the source of the problem can +instantly identified by looking at the differences in protocol +transactions.</p> + +<p>If the bug involves a core dump or hang, a gdb stack trace is +good to have. (Bear in mind that you can attach gdb to a running +but hung process by giving the process ID as a second argument.) +You will need to reconfigure with:</p> <pre> CFLAGS=-g LDFLAGS=" " ./configure </pre> -<p>Then rebuild in order to generate a version that can be gdb-traced.</p> - -<p>Best of all is a mail file which, when fetched, will reproduce the -bug under the latest (current) version.</p> - -<p>Any bug I can reproduce will usually get fixed very quickly, often -within 48 hours. Bugs I can't reproduce are a crapshoot. If the -solution isn't obvious when I first look, it may evade me for a long -time (or to put it another way, fetchmail is well enough tested that the -easy bugs have long since been found). So if you want your bug fixed -rapidly, it is not just sufficient but nearly <em>necessary</em> that -you give me a way to reproduce it.</p> - -<hr> -<h2><a name="G4">G4. I have this idea for a neat feature. Will you add it?</a></h2> - -<p>Probably not. Most of the feature suggestions I get are for ways to -set various kinds of administrative policy or add more spam filtering -(the most common one, which I used to get about four million times a week -and got <em>really</em> tired of, is for tin-like kill files).</p> - -<p>You can do spam filtering better with procmail or maildrop on the -server side and (if you're the server sysadmin) sendmail.cf domain -exclusions. You can do other policy things better with the -<CODE>mda</CODE> option and script wrappers around fetchmail. If +<p>Then rebuild in order to generate a version that can be +gdb-traced.</p> + +<p>Best of all is a mail file which, when fetched, will reproduce +the bug under the latest (current) version.</p> + +<p>Any bug I can reproduce will usually get fixed very quickly, +often within 48 hours. Bugs I can't reproduce are a crapshoot. If +the solution isn't obvious when I first look, it may evade me for a +long time (or to put it another way, fetchmail is well enough +tested that the easy bugs have long since been found). So if you +want your bug fixed rapidly, it is not just sufficient but nearly +<em>necessary</em> that you give me a way to reproduce it.</p> + +<hr /> +<h2><a id="G4" name="G4">G4. I have this idea for a neat feature. +Will you add it?</a></h2> + +<p>Probably not. Most of the feature suggestions I get are for ways +to set various kinds of administrative policy or add more spam +filtering (the most common one, which I used to get about four +million times a week and got <em>really</em> tired of, is for +tin-like kill files).</p> + +<p>You can do spam filtering better with procmail or maildrop on +the server side and (if you're the server sysadmin) sendmail.cf +domain exclusions. You can do other policy things better with the +<code>mda</code> option and script wrappers around fetchmail. If it's a prime-time-vs.-non-prime-time issue, ask yourself whether a wrapper script called from crontab would do the job.</p> -<p>I'm not going to do these; fetchmail's job is transport, not policy, and I -refuse to change it from doing one thing well to attempting many things badly. -One of my objectives is to keep fetchmail simple so it stays reliable.</p> +<p>I'm not going to do these; fetchmail's job is transport, not +policy, and I refuse to change it from doing one thing well to +attempting many things badly. One of my objectives is to keep +fetchmail simple so it stays reliable.</p> -<p>For reasons fetchmail doesn't have other commonly-requested features -(such as password encryption, or multiple concurrent polls from the -same instance of fetchmail) see the <a -href="http://www.tuxedo.org/~esr/fetchmail/design-notes.html">design notes</a>.</p> +<p>For reasons fetchmail doesn't have other commonly-requested +features (such as password encryption, or multiple concurrent polls +from the same instance of fetchmail) see the <a +href="http://www.tuxedo.org/~esr/fetchmail/design-notes.html">design +notes</a>.</p> <p>Fetchmail is a mature project, no longer in constant active -development. It is no longer my top project, and I am going to be +development. It is no longer my top project, and I am going to be quite reluctant to add features that might either jeopardize its stability or involve me in large amounts of coding.</p> -<p>All that said, if you have a feature idea that really is about a transport -problem that can't be handled anywhere but fetchmail, lay it on me. I'm -very accommodating about good ideas.</p> +<p>All that said, if you have a feature idea that really is about a +transport problem that can't be handled anywhere but fetchmail, lay +it on me. I'm very accommodating about good ideas.</p> -<hr> -<h2><a name="G5">G5. I want to make fetchmail behave like Outlook Express.</a></h2> +<hr /> +<h2><a id="G5" name="G5">G5. I want to make fetchmail behave like +Outlook Express.</a></h2> <p>The second-most-requested feature for fetchmail, after content-based filtering, is the ability to have it remove messages from a maildrop after N days, typically to be used with the -<code>keep</code> option as a sort of poor man's newsgroup facility. -Microsoft's Outlook Express supports this.</p> +<code>keep</code> option as a sort of poor man's newsgroup +facility. Microsoft's Outlook Express supports this.</p> <p>This feature won't be added either. Repeat after me: fetchmail's -job is transport, not policy. If you want this, write a Perl or +job is transport, not policy. If you want this, write a Perl or Python script, to be run from a cron job, that deletes old messages -off your maildrop. Send it to me and I'll put it in the contrib +off your maildrop. Send it to me and I'll put it in the contrib directory.</p> -<hr> -<h2><a name="G6">G6. Is there a mailing list for exchanging tips?</a></h2> +<hr /> +<h2><a id="G6" name="G6">G6. Is there a mailing list for exchanging +tips?</a></h2> <p>There is a fetchmail-friends list -(fetchmail-friends@lists.ccil.org) for people who want to discuss fixes -and improvements in fetchmail and help co-develop it. It's a MailMan -list, which you can sign up for at -<a href="http://lists.ccil.org/mailman/listinfo/fetchmail-friends">http://lists.ccil.org/mailman/listinfo/fetchmail-friends</a>. +(fetchmail-friends@lists.ccil.org) for people who want to discuss +fixes and improvements in fetchmail and help co-develop it. It's a +MailMan list, which you can sign up for at <a +href="http://lists.ccil.org/mailman/listinfo/fetchmail-friends">http://lists.ccil.org/mailman/listinfo/fetchmail-friends</a>. There is also an announcements-only list, -fetchmail-announce@lists.ccil.org, which you can sign up for at <a href="http://lists.ccil.org/mailman/listinfo/fetchmail-announce">http://lists.ccil.org/mailman/listinfo/fetchmail-announce</a>.</p> +fetchmail-announce@lists.ccil.org, which you can sign up for at <a +href="http://lists.ccil.org/mailman/listinfo/fetchmail-announce">http://lists.ccil.org/mailman/listinfo/fetchmail-announce</a>.</p> -<hr> -<h2><a name="G7">G7. So, what's this I hear about a fetchmail paper?</a></h2> +<hr /> +<h2><a id="G7" name="G7">G7. So, what's this I hear about a +fetchmail paper?</a></h2> <p>The fetchmail development was also a sociological experiment, an -extended test to see if my theory about the critical features of the -Linux development model is correct.</p> +extended test to see if my theory about the critical features of +the Linux development model is correct.</p> -<p>The experiment was a success. I wrote a paper about it titled <a +<p>The experiment was a success. I wrote a paper about it titled <a href="http://www.tuxedo.org/~esr/writings/cathedral.html">The Cathedral and the Bazaar</a> which was first presented at Linux Kongress '97 in Bavaria and very well received there. It was also given at Atlanta Linux Expo, Linux Pro '97 in Warsaw, and the first Perl Conference, at UniForum '98, and was the basis of an invited -presentation at Usenix '98. The folks at Netscape tell me it helped +presentation at Usenix '98. The folks at Netscape tell me it helped them decide to <a -href="http://www.netscape.com/newsref/pr/newsrelease558.html"> give +href="http://www.netscape.com/newsref/pr/newsrelease558.html">give away the source for Netscape Communicator</a>.</p> -<p>If you're reading a non-HTML dump of this FAQ, you can find the paper -on the Web with a search for that title.</p> +<p>If you're reading a non-HTML dump of this FAQ, you can find the +paper on the Web with a search for that title.</p> -<hr> -<h2><a name="G8">G8. What is the best server to use with fetchmail?</a></h2> +<hr /> +<h2><a id="G8" name="G8">G8. What is the best server to use with +fetchmail?</a></h2> <p>The short answer: IMAP 2000 running over Unix.</p> -<p>Here's a longer answer: </p> - -<p>Fetchmail will work with any POP, IMAP, ETRN, or ODMR server that -conforms to the relevant RFCs (and even some outright broken ones like -<a href="#S2">Microsoft Exchange</a> and <a href="#S12">Novell -GroupWise</a>). This doesn't mean it works equally well with all, -however. POP2 servers, and POP3 servers without LAST, limit -fetchmail's capabilities in various ways described on the manual -page.</p> - -<p>Most modern Unixes (and effectively all Linux/*BSD systems) come with -POP3 support preconfigured (but beware of the horribly broken POP3 -server mentioned in <a href="#D2">D2</a>). An increasing minority -also feature IMAP (you can detect IMAP support by running fetchmail in -AUTO mode, or by using the `Probe for supported protocols' function in -the fetchmailconf utility).</p> - -<p>If you have the option, we recommend using or installing an IMAP4rev1 -server; it has the best facilities for tracking message `seen' states. -It also recovers from interrupted connections more gracefully than -POP3, and enables some significant performance optimizations. The new -<a href="ftp://ftp.cac.washington.edu/imap/imap.tar.Z">IMAP 2000</a> +<p>Here's a longer answer:</p> + +<p>Fetchmail will work with any POP, IMAP, ETRN, or ODMR server +that conforms to the relevant RFCs (and even some outright broken +ones like <a href="#S2">Microsoft Exchange</a> and <a +href="#S12">Novell GroupWise</a>). This doesn't mean it works +equally well with all, however. POP2 servers, and POP3 servers +without LAST, limit fetchmail's capabilities in various ways +described on the manual page.</p> + +<p>Most modern Unixes (and effectively all Linux/*BSD systems) come +with POP3 support preconfigured (but beware of the horribly broken +POP3 server mentioned in <a href="#D2">D2</a>). An increasing +minority also feature IMAP (you can detect IMAP support by running +fetchmail in AUTO mode, or by using the `Probe for supported +protocols' function in the fetchmailconf utility).</p> + +<p>If you have the option, we recommend using or installing an +IMAP4rev1 server; it has the best facilities for tracking message +`seen' states. It also recovers from interrupted connections more +gracefully than POP3, and enables some significant performance +optimizations. The new <a +href="ftp://ftp.cac.washington.edu/imap/imap.tar.Z">IMAP 2000</a> is particularly nice, as it supports CRAM-MD5 so you don't have to -ship your mail password over the net en clair (fetchmail autodetects -this capability). Older versions had support for GSSAPI giving a -similar effect.</p> - -<p>Don't be fooled by NT/Exchange propaganda. M$ Exchange is just plain -broken (see item <a href="#S2">S2</a>) and NT cannot handle the -sustained load of a high-volume remote mail server. Even Microsoft -itself knows better than to try this; their own Hotmail service runs -over Solaris! For extended discussion, see John Kirch's excellent <a -href="http://unix-vs-nt.org/kirch/">white paper</a> on Unix -vs. NT performance.</p> - -<p>Source for a high-quality supported implementation of POP is available -from the <a href="ftp://ftp.qualcomm.com/eudora/servers/unix/popper/">Eudora -FTP site</a>. Don't use 2.5, which has a rather restrictive license. -The 2.5.2 version appears to restore the open-source license of -previous versions.</p> - -<hr> -<h2><a name="G9">G9. What is the best mail program to use with fetchmail?</a></h2> - -<p>Fetchmail will work with all popular <a href="#T1">mail transport -programs</a>. It also doesn't care which user agent you use, and user -agents are as a rule almost equally indifferent to how mail is -delivered into your system mailbox. So any of the popular Unix mail -agents -- <a href="http://www.myxa.com/old/elm.html">elm</a>, <a +ship your mail password over the net en clair (fetchmail +autodetects this capability). Older versions had support for GSSAPI +giving a similar effect.</p> + +<p>Don't be fooled by NT/Exchange propaganda. M$ Exchange is just +plain broken (see item <a href="#S2">S2</a>) and NT cannot handle +the sustained load of a high-volume remote mail server. Even +Microsoft itself knows better than to try this; their own Hotmail +service runs over Solaris! For extended discussion, see John +Kirch's excellent <a href="http://unix-vs-nt.org/kirch/">white +paper</a> on Unix vs. NT performance.</p> + +<p>Source for a high-quality supported implementation of POP is +available from the <a +href="ftp://ftp.qualcomm.com/eudora/servers/unix/popper/">Eudora +FTP site</a>. Don't use 2.5, which has a rather restrictive +license. The 2.5.2 version appears to restore the open-source +license of previous versions.</p> + +<hr /> +<h2><a id="G9" name="G9">G9. What is the best mail program to use +with fetchmail?</a></h2> + +<p>Fetchmail will work with all popular <a href="#T1">mail +transport programs</a>. It also doesn't care which user agent you +use, and user agents are as a rule almost equally indifferent to +how mail is delivered into your system mailbox. So any of the +popular Unix mail agents -- <a +href="http://www.myxa.com/old/elm.html">elm</a>, <a href="http://www.washington.edu/pine/">pine</a>, <a -href="http://www.cs.indiana.edu/docproject/mail/mh.html">mh</a>, or <a -href="http://www.mutt.org">mutt</a> -- will work fine with fetchmail.</p> - -<p>All this having been said, I can't resist putting in a discreet plug -for <a href="http://www.mutt.org">mutt</a>. My own personal mail -setup is sendmail plus fetchmail plus mutt. Mutt's interface is only -a little different from that of its now-moribund ancestor elm, but its -excellent handling of MIME and PGP put it in a class by itself. You -won't need its built-in POP3 support, though; most of the mutt -developers will cheerfully admit that fetchmail's is better :-).</p> - -<hr> -<h2><a name="G10">G10. How can I avoid sending my password en clair?</a></h2> - -<p>Depending on what your mail server you are talking to, this ranges -from trivial to impossible. It may even be next to useless.</p> - -<p>Most people use fetchmail over phone wires, which are hard to tap. -Anybody with the skill and resources to do this could get into your -server mailbox with much less effort by subverting the server host. -So if your provider setup is modem wires going straight into a service -box, you probably don't need to worry.</p> - -<p>In general there is little point in trying to secure your fetchmail -transaction unless you trust the security of the server host you are -retrieving mail from. Your vulnerability is more likely to be an -insecure local network on the server end (e.g. to somebody with a TCP/IP -packet sniffer intercepting Ethernet traffic between the modem -concentrator you dial in to and the mailserver host).</p> - -<p>Having realized this, you need to ask whether password encryption -alone will really address your security exposure. If you think you -might be snooped between server and client, it's better to use -end-to-end encryption on your whole mail stream so none of it can be -read. One of the advantages of fetchmail over conventional SMTP-push -delivery is that you may be able to arrange this by using ssh(1); see -<a href="#K3">K3</a>.</p> - -<p>Note that ssh is not a complete privacy solution either, as your mail -could have been snooped in transit to your POP server from wherever it -originated. For best security, agree with your correspondents to use -a tool such as <a href="http://www.gnupg.org/">GPG</a> (Gnu Privacy -Guard) or PGP (Pretty Good Privacy).</p> - -<p>If ssh/sshd isn't available, or you find it too complicated for you to -set up, password encryption will at least keep a malicious cracker -from deleting your mail, and require him to either tap your connection -continuously or crack root on the server in order to read it.</p> +href="http://www.cs.indiana.edu/docproject/mail/mh.html">mh</a>, or +<a href="http://www.mutt.org">mutt</a> -- will work fine with +fetchmail.</p> + +<p>All this having been said, I can't resist putting in a discreet +plug for <a href="http://www.mutt.org">mutt</a>. My own personal +mail setup is sendmail plus fetchmail plus mutt. Mutt's interface +is only a little different from that of its now-moribund ancestor +elm, but its excellent handling of MIME and PGP put it in a class +by itself. You won't need its built-in POP3 support, though; most +of the mutt developers will cheerfully admit that fetchmail's is +better :-).</p> + +<hr /> +<h2><a id="G10" name="G10">G10. How can I avoid sending my password +en clair?</a></h2> + +<p>Depending on what your mail server you are talking to, this +ranges from trivial to impossible. It may even be next to +useless.</p> + +<p>Most people use fetchmail over phone wires, which are hard to +tap. Anybody with the skill and resources to do this could get into +your server mailbox with much less effort by subverting the server +host. So if your provider setup is modem wires going straight into +a service box, you probably don't need to worry.</p> + +<p>In general there is little point in trying to secure your +fetchmail transaction unless you trust the security of the server +host you are retrieving mail from. Your vulnerability is more +likely to be an insecure local network on the server end (e.g. to +somebody with a TCP/IP packet sniffer intercepting Ethernet traffic +between the modem concentrator you dial in to and the mailserver +host).</p> + +<p>Having realized this, you need to ask whether password +encryption alone will really address your security exposure. If you +think you might be snooped between server and client, it's better +to use end-to-end encryption on your whole mail stream so none of +it can be read. One of the advantages of fetchmail over +conventional SMTP-push delivery is that you may be able to arrange +this by using ssh(1); see <a href="#K3">K3</a>.</p> + +<p>Note that ssh is not a complete privacy solution either, as your +mail could have been snooped in transit to your POP server from +wherever it originated. For best security, agree with your +correspondents to use a tool such as <a +href="http://www.gnupg.org/">GPG</a> (Gnu Privacy Guard) or PGP +(Pretty Good Privacy).</p> + +<p>If ssh/sshd isn't available, or you find it too complicated for +you to set up, password encryption will at least keep a malicious +cracker from deleting your mail, and require him to either tap your +connection continuously or crack root on the server in order to +read it.</p> <p>You can deduce what encryptions your mail server has available -by looking at the server greeting line (and, for IMAP, the -response to a CAPABILITY query). Do a <code>fetchmail -v</code> -to see these, or telnet direct to the server port (110 for POP3, 143 for +by looking at the server greeting line (and, for IMAP, the response +to a CAPABILITY query). Do a <code>fetchmail -v</code> to see +these, or telnet direct to the server port (110 for POP3, 143 for IMAP).</p> -<p>If your mailserver is using IMAP 2000, you'll have CRAM-MD5 support -built in. Fetchmail autodetects this; you can skip the rest of this -section.</p> - -<p>The POP3 facility you are most likely to have available is APOP. This is a -POP3 feature supported by many servers (fetchmailconf's autoprobe -facility will detect it and tell you if you have it). If you see -something in the greeting line that looks like an -angle-bracket-enclosed Internet address with a numeric left-hand part, -that's an APOP challenge (it will vary each time you log in). You can -register a secret on the host (using <code>popauth(8)</code> or some -program like it). Specify the secret as your password in your -.fetchmailrc; it will be used to encrypt the current challenge, and -the encrypted form will be sent back the the server for -verification.</p> - -<p>Alternatively, you may have Kerberos available. This may require you -to set up some magic files in your home directory on your client -machine, but means you can omit specifying any password at all.</p> - -<p>Fetchmail supports two different Kerberos schemes. One is a POP3 -variant called KPOP; consult the documentation of your mail server to -see if you have it (one clue is the string "krb-IV" in the greeting -line on port 110). The other is an IMAP and POP3 facility described -by RFC1731 and RFC1734. You can tell if this one is present by looking -for AUTH=KERBEROS_V4 in the CAPABILITY response.</p> - -<p>If you are fetching mail from a CompuServe POP3 account, you can use -their RPA authentication (which works much like APOP). See <a -href="#S3">S3</a> for details. If you are fetching mail from +<p>If your mailserver is using IMAP 2000, you'll have CRAM-MD5 +support built in. Fetchmail autodetects this; you can skip the rest +of this section.</p> + +<p>The POP3 facility you are most likely to have available is APOP. +This is a POP3 feature supported by many servers (fetchmailconf's +autoprobe facility will detect it and tell you if you have it). If +you see something in the greeting line that looks like an +angle-bracket-enclosed Internet address with a numeric left-hand +part, that's an APOP challenge (it will vary each time you log in). +You can register a secret on the host (using +<code>popauth(8)</code> or some program like it). Specify the +secret as your password in your .fetchmailrc; it will be used to +encrypt the current challenge, and the encrypted form will be sent +back the the server for verification.</p> + +<p>Alternatively, you may have Kerberos available. This may require +you to set up some magic files in your home directory on your +client machine, but means you can omit specifying any password at +all.</p> + +<p>Fetchmail supports two different Kerberos schemes. One is a POP3 +variant called KPOP; consult the documentation of your mail server +to see if you have it (one clue is the string "krb-IV" in the +greeting line on port 110). The other is an IMAP and POP3 facility +described by RFC1731 and RFC1734. You can tell if this one is +present by looking for AUTH=KERBEROS_V4 in the CAPABILITY +response.</p> + +<p>If you are fetching mail from a CompuServe POP3 account, you can +use their RPA authentication (which works much like APOP). See <a +href="#S3">S3</a> for details. If you are fetching mail from Microsoft Exchange using IMAP, you will be able to use NTLM.</p> -<p>Your POP3 server may have the RFC1938 OTP capability to use one-time -passwords (if it doesn't, you can get OTP patches for the 2.2 version -of the Qualcomm popper from <a href="#cmetz">Craig Metz</a>). To check -this, look for the string "otp-" in the greeting line. If you see it, -and your fetchmail was built with OPIE support compiled in (see the -distribution INSTALL file), fetchmail will detect it also. When using -OTP, you will specify a password but it will not be sent en clair.</p> - -<p>You can get both POP3 and IMAP OTP patches from <a name="cmetz">Craig -Metz</A> at <a -href="http://www.inner.net/pub/">http://www.inner.net/pub/</a>.<p> -These patches use a SASL authentication method named "X-OTP" because -there is not currently a standard way to do this; fetchmail also uses -this method, so the two will interoperate happily. They better, -because this is how Craig gets his mail ;-)</p> +<p>Your POP3 server may have the RFC1938 OTP capability to use +one-time passwords (if it doesn't, you can get OTP patches for the +2.2 version of the Qualcomm popper from <a href="#cmetz">Craig +Metz</a>). To check this, look for the string "otp-" in the +greeting line. If you see it, and your fetchmail was built with +OPIE support compiled in (see the distribution INSTALL file), +fetchmail will detect it also. When using OTP, you will specify a +password but it will not be sent en clair.</p> + +<p>You can get both POP3 and IMAP OTP patches from <a id="cmetz" +name="cmetz">Craig Metz</a> at <a +href="http://www.inner.net/pub/">http://www.inner.net/pub/</a>.</p> + +<p>These patches use a SASL authentication method named "X-OTP" +because there is not currently a standard way to do this; fetchmail +also uses this method, so the two will interoperate happily. They +better, because this is how Craig gets his mail ;-)</p> <p>Finally, you can use <a href="#K5">SSL</a> for complete end-to-end encryption if you have an SSL-enabled mailserver.</p> -<hr> -<h2><a name="G11">G11. Is any special configuration needed to use a dynamic IP address?</a></h2> +<hr /> +<h2><a id="G11" name="G11">G11. Is any special configuration needed +to use a dynamic IP address?</a></h2> <p>Yes. In order to avoid giving indigestion to certain picky MTAs -(notably <a href="#T3">exim</a>), fetchmail always makes the RCPT TO -address it feeds the MTA a fully qualified one with a hostname part. -Normally it does this by appending @ and "localhost", but when you are -using Kerberos or ETRN mode it will append @ and your machine's -fully-qualified domain name (FQDN).</p> - -<p>Appending the FQDN can create problems when fetchmail is running in daemon -mode and outlasts the dynamic IP address assignment your client -machine had when it started up.</p> - -<p>Since the new IP address (looked up at RCPT TO interpretation time) -doesn't match the original, the most benign possible result is that -your MTA thinks it's seeing a relaying attempt and refuses. More -frequently, fetchmail will try to connect to a nonexistent host -address and time out. Worst case, you could up forwarding your mail -to the wrong machine!</p> - -<p>Use the <code>smtpaddress</code> option to force the appended hostname -to one with a (fixed) IP address of 127.0.0.1 in your -<code>/etc/hosts</code>. (The name `localhost' will usually work; or -you can use the IP address itself).</p> - -<p>Only one fetchmail option interacts directly with your IP address, -`<code>interface</code>'. This option can be used to set the gateway -device and restrict the IP address range fetchmail will use. Such a -restriction is sometimes useful for security reasons, especially on -multihomed sites. See <a href="#C3">C3</a>.</p> - -<p>I recommend against trying to set up the <code>interface</code> option -when initially developing your poll configuration -- it's never -necessary to do this just to get a link working. Get the link working -first, observe the actual address range you see on connections, and -add an <code>interface</code> option (if you need one) later.</p> - -<p>You can't use ETRN if you have a dynamic IP address (your ISP changes -your IP address occasionally, possibly with every connect). You need -to have your own registered domain and a definite IP address -registered for that domain. The server needs to be configured to -accept mail for your domain but then queue it to forward to your -machine. ETRN just tells to server to flush its queue for your -domain. Fetchmail doesn't actually get the mail in that case.</p> - -<p>You can use On-Demand Mail Relay (ODMR) with a dynamic IP address; -that's what it was designed for, and it provides capabilities very -similar to ETRN. Unfortunately ODMR servers are not yet widely -deployed, as of early 2001.</p> - -<p>If you're using a dynamic-IP configuration, one other (non-fetchmail) -problem you may run into with outgoing mail is that some sites will -bounce your email because the hostname your giving them isn't real -(and doesn't match what they get doing a reverse DNS on your -dynamically-assigned IP address). If this happens, you need to hack -your sendmail so it masquerades as your host. Setting</p> +(notably <a href="#T3">exim</a>), fetchmail always makes the RCPT +TO address it feeds the MTA a fully qualified one with a hostname +part. Normally it does this by appending @ and "localhost", but +when you are using Kerberos or ETRN mode it will append @ and your +machine's fully-qualified domain name (FQDN).</p> + +<p>Appending the FQDN can create problems when fetchmail is running +in daemon mode and outlasts the dynamic IP address assignment your +client machine had when it started up.</p> + +<p>Since the new IP address (looked up at RCPT TO interpretation +time) doesn't match the original, the most benign possible result +is that your MTA thinks it's seeing a relaying attempt and refuses. +More frequently, fetchmail will try to connect to a nonexistent +host address and time out. Worst case, you could up forwarding your +mail to the wrong machine!</p> + +<p>Use the <code>smtpaddress</code> option to force the appended +hostname to one with a (fixed) IP address of 127.0.0.1 in your +<code>/etc/hosts</code>. (The name `localhost' will usually work; +or you can use the IP address itself).</p> + +<p>Only one fetchmail option interacts directly with your IP +address, `<code>interface</code>'. This option can be used to set +the gateway device and restrict the IP address range fetchmail will +use. Such a restriction is sometimes useful for security reasons, +especially on multihomed sites. See <a href="#C3">C3</a>.</p> + +<p>I recommend against trying to set up the <code>interface</code> +option when initially developing your poll configuration -- it's +never necessary to do this just to get a link working. Get the link +working first, observe the actual address range you see on +connections, and add an <code>interface</code> option (if you need +one) later.</p> + +<p>You can't use ETRN if you have a dynamic IP address (your ISP +changes your IP address occasionally, possibly with every connect). +You need to have your own registered domain and a definite IP +address registered for that domain. The server needs to be +configured to accept mail for your domain but then queue it to +forward to your machine. ETRN just tells to server to flush its +queue for your domain. Fetchmail doesn't actually get the mail in +that case.</p> + +<p>You can use On-Demand Mail Relay (ODMR) with a dynamic IP +address; that's what it was designed for, and it provides +capabilities very similar to ETRN. Unfortunately ODMR servers are +not yet widely deployed, as of early 2001.</p> + +<p>If you're using a dynamic-IP configuration, one other +(non-fetchmail) problem you may run into with outgoing mail is that +some sites will bounce your email because the hostname your giving +them isn't real (and doesn't match what they get doing a reverse +DNS on your dynamically-assigned IP address). If this happens, you +need to hack your sendmail so it masquerades as your host. +Setting</p> <pre> DMsmarthost.here </pre> -<p>in your <code>sendmail.cf</code> will work, or you can set</p> +<p>in your <code>sendmail.cf</code> will work, or you can set</p> <pre> MASQUERADE_AS(smarthost.here) </pre> -<p>in the m4 configuration and do a reconfigure. (In both cases, replace -<code>smarthost.here</code> with the actual name of your mailhost.) -See the <a href="http://www.lege.com/sendmail-FAQ.txt">sendmail -FAQ</a> for more details.</p> +<p>in the m4 configuration and do a reconfigure. (In both cases, +replace <code>smarthost.here</code> with the actual name of your +mailhost.) See the <a +href="http://www.lege.com/sendmail-FAQ.txt">sendmail FAQ</a> for +more details.</p> -<hr> -<h2><a name="G12">G12. Is any special configuration needed to use firewalls?</a></h2> +<hr /> +<h2><a id="G12" name="G12">G12. Is any special configuration needed +to use firewalls?</a></h2> -<p>No. You can use fetchmail with SOCKS, the standard tool for -indirecting TCP/IP through a firewall. You can find out about SOCKS, -and download the SOCKS software including server and client code, at -the <a href="http://www.socks.nec.com/">SOCKS distribution +<p>No. You can use fetchmail with SOCKS, the standard tool for +indirecting TCP/IP through a firewall. You can find out about +SOCKS, and download the SOCKS software including server and client +code, at the <a href="http://www.socks.nec.com/">SOCKS distribution site</a>.</p> <p>The specific recipe for using fetchmail with a firewall is at <a href="#K1">K1</a></p> -<hr> -<h2><a name="G13">G13. Is any special configuration needed to <em>send</em> mail?</a></h2> +<hr /> +<h2><a id="G13" name="G13">G13. Is any special configuration needed +to <em>send</em> mail?</a></h2> -<p>A user asks: but how do we send mail out to the POP3 server? Do I need -to implement another tool or will fetchmail do this too?</p> +<p>A user asks: but how do we send mail out to the POP3 server? Do +I need to implement another tool or will fetchmail do this too?</p> -<p>Fetchmail only handles the receiving side. The sendmail or other +<p>Fetchmail only handles the receiving side. The sendmail or other preinstalled MTA on your client machine will handle sending mail automatically; it will ship mail that is submitted while the -connection is active, and put mail that is submitted while -the connection is inactive into the outgoing queue.</p> +connection is active, and put mail that is submitted while the +connection is inactive into the outgoing queue.</p> -<p>Normally, sendmail is also run periodically (every 15 minutes on most -Linux systems) in a mode that tries to ship all the mail in the -outgoing queue. If you have set up something like pppd to +<p>Normally, sendmail is also run periodically (every 15 minutes on +most Linux systems) in a mode that tries to ship all the mail in +the outgoing queue. If you have set up something like pppd to automatically dial out when your kernel is called to open a TCP/IP connection, this will ensure that the mail gets out.</p> -<hr> -<h2><a name="G14">G14. Is fetchmail Y2K-compliant?</a></h2> +<hr /> +<h2><a id="G14" name="G14">G14. Is fetchmail +Y2K-compliant?</a></h2> -<p>Fetchmail is fully Y2K-compliant.</p> +<p>Fetchmail is fully Y2K-compliant.</p> -<p>Fetchmail could theoretically have problems when the 32-bit time_t -counters roll over in 2038, but I doubt it. Timestamps aren't used -for anything but log entry generation. Anyway, if you aren't running -on a 64-bit machine by then, you'll deserve to lose.</p> +<p>Fetchmail could theoretically have problems when the 32-bit +time_t counters roll over in 2038, but I doubt it. Timestamps +aren't used for anything but log entry generation. Anyway, if you +aren't running on a 64-bit machine by then, you'll deserve to +lose.</p> -<hr> -<h2><a name="G15">G15. Is there a way in fetchmail to support disconnected IMAP mode?</a></H2> +<hr /> +<h2><a id="G15" name="G15">G15. Is there a way in fetchmail to +support disconnected IMAP mode?</a></h2> -<p>No. Fetchmail is a mail transport agent, best understood as a protocol -gateway between POP3/IMAP servers and SMTP. Disconnected operation -requires an elaborate interactive client. It's a very different problem.</p> +<p>No. Fetchmail is a mail transport agent, best understood as a +protocol gateway between POP3/IMAP servers and SMTP. Disconnected +operation requires an elaborate interactive client. It's a very +different problem.</p> -<hr> -<h2><a name="G16">G16. How will fetchmail perform under heavy loads?</a></h2> +<hr /> +<h2><a id="G16" name="G16">G16. How will fetchmail perform under +heavy loads?</a></h2> <p>Fetchmail streams message bodies line-by-line; the most core it -ever requires per message is enough memory to hold the RFC822 header, and -that storage is freed when body processing begins. It is, accordingly, -quite economical in its use of memory.</p> +ever requires per message is enough memory to hold the RFC822 +header, and that storage is freed when body processing begins. It +is, accordingly, quite economical in its use of memory.</p> <p>After startup time, a fetchmail running in daemon mode stats its -configuration file once per poll cycle to see whether it has changed -and should be rescanned. Other than that, a fetchmail in normal -operation doesn't touch the disk at all; that job is left up to the -MTA or MDA the fetchmail talks to.</p> +configuration file once per poll cycle to see whether it has +changed and should be rescanned. Other than that, a fetchmail in +normal operation doesn't touch the disk at all; that job is left up +to the MTA or MDA the fetchmail talks to.</p> -<p>Fetchmail's performance is usually bottlenecked by latency on the POP -server or (less often) on the TCP/IP link to the server. This is not -a problem readily solved by tuning fetchmail, or even by buying more -TCP/IP capacity (which tends to improve bandwidth but not necessarily -latency).</p> +<p>Fetchmail's performance is usually bottlenecked by latency on +the POP server or (less often) on the TCP/IP link to the server. +This is not a problem readily solved by tuning fetchmail, or even +by buying more TCP/IP capacity (which tends to improve bandwidth +but not necessarily latency).</p> -<hr> -<h2><a name="B1">B1. Make coughs and dies when building on FreeBSD.</a></h2> +<hr /> +<h2><a id="B1" name="B1">B1. Make coughs and dies when building on +FreeBSD.</a></h2> -<p>The vendor-supplied make on FreeBSD systems can only be used within -FreeBSD's "scope", e.g. the ports collection. Type "gmake" to run GNU -make and better things will happen.</p> +<p>The vendor-supplied make on FreeBSD systems can only be used +within FreeBSD's "scope", e.g. the ports collection. Type "gmake" +to run GNU make and better things will happen.</p> -<hr> -<h2><a name="B2">B2. Lex bombs out while building the fetchmail lexer.</a></h2> +<hr /> +<h2><a id="B2" name="B2">B2. Lex bombs out while building the +fetchmail lexer.</a></h2> -<p>In the immortal words of Alan Cox the last time this came up: ``Take -the Solaris lex and stick it up the backside of a passing Sun -salesman, then install <a -href="ftp://ftp.gnu.org/pub/non-gnu/flex/">flex</a> and use that. All -will be happier.''</p> +<p>In the immortal words of Alan Cox the last time this came up: +``Take the Solaris lex and stick it up the backside of a passing +Sun salesman, then install <a +href="ftp://ftp.gnu.org/pub/non-gnu/flex/">flex</a> and use that. +All will be happier.''</p> -<p>I couldn't have put it better myself, and ain't going to try now.</p> +<p>I couldn't have put it better myself, and ain't going to try +now.</p> -<p>(The same problem has been reported under HP-UX v10.20 and IRIX)</p> +<p>(The same problem has been reported under HP-UX v10.20 and +IRIX)</p> -<hr> -<h2><a name="B3">B3. I get link failures when I try to build fetchmail.</a></h2> +<hr /> +<h2><a id="B3" name="B3">B3. I get link failures when I try to +build fetchmail.</a></h2> <p>If you get errors resembling these</p> -<p><pre> +<pre> mxget.o(.text+0x35): undefined referenceto `__res_search' mxget.o(.text+0x99): undefined reference to`__dn_skipname' mxget.o(.text+0x11c): undefined reference to`__dn_expand' @@ -730,10 +887,11 @@ mxget.o(.text+0x187): undefined reference to`__dn_expand' make: *** [fetchmail] Error 1 </pre> -<p>then you must add "-lresolv" to the LOADLIBS line in your Makefile -once you have installed the `bind' package.</p> +<p>then you must add "-lresolv" to the LOADLIBS line in your +Makefile once you have installed the `bind' package.</p> -<p>If you get link errors involving <tt>dcgettext</tt>, like this:</p> +<p>If you get link errors involving <tt>dcgettext</tt>, like +this:</p> <pre> rcfile_y.o: In function `yyparse': @@ -746,53 +904,57 @@ rcfile_y.o(.text+0xcc8): undefined reference to `dcgettext__' rcfile_y.o(.text+0xdf9): more undefined references to `dcgettext__' follow </pre> -<p>reconfigure with <tt>configure --with-included-gettext</tt>. This is -due to some brain-damage in the GNU internationalization libraries.</p> +<p>reconfigure with <tt>configure --with-included-gettext</tt>. +This is due to some brain-damage in the GNU internationalization +libraries.</p> -<hr> -<h2><a name="B4">B4. I get build failures in the intl directory.</a></h2> +<hr /> +<h2><a id="B4" name="B4">B4. I get build failures in the intl +directory.</a></h2> <p>Reconfigure with <tt>--disable-nls</tt> and recompile.</p> -<p>GNU gettext is an overengineered, fragile pile of crap. I have -teetered on the brink of removing support for it entirely several times.</p> +<p>GNU gettext is an overengineered, fragile pile of crap. I have +teetered on the brink of removing support for it entirely several +times.</p> -<hr> -<h2><a name="F1">F1. Why does my old .fetchmailrc file no longer work?</a></h2> +<hr /> +<h2><a id="F1" name="F1">F1. Why does my old .fetchmailrc file no +longer work?</a></h2> <h3>If your file predates 5.8.9</h3> -<p>If you were using ETRN mode, change your <tt>smtphost</tt> option to -a <tt>fetchdomains</tt> option.</p> +<p>If you were using ETRN mode, change your <tt>smtphost</tt> +option to a <tt>fetchdomains</tt> option.</p> <h3>If your file predates 5.8.3</h3> -<p>The `via localhost' special case for use with ssh tunnelling is gone. -Use the %h feature of <tt>plugin</tt> instead.</p> +<p>The `via localhost' special case for use with ssh tunnelling is +gone. Use the %h feature of <tt>plugin</tt> instead.</p> <h3>If your file predates 5.6.8</h3> -<p>In 5.6.8, the <tt>preauth</tt> keyword and option were changed back to -<tt>auth</tt>. The <tt>preauth</tt> synonym will still be supported -through a few more point releases.</p> +<p>In 5.6.8, the <tt>preauth</tt> keyword and option were changed +back to <tt>auth</tt>. The <tt>preauth</tt> synonym will still be +supported through a few more point releases.</p> -<p><h3>If your file predates 5.6.5</h3> +<h3>If your file predates 5.6.5</h3> <p>The <tt>imap-gss</tt>, <tt>imap-k4</tt>, and <tt>imap-login</tt> protocol types are gone. This is a result of a major re-factoring of the authentication machinery; fetchmail can now use Kerberos V4 -and GSSAPI not just with IMAP but with POP3 servers that have RFC1734 -support for the AUTH command.</p> +and GSSAPI not just with IMAP but with POP3 servers that have +RFC1734 support for the AUTH command.</p> -<p>When trying to identify you to an IMAP or POP mailserver, fetchmail -now first tries methods that don't require a password (GSSAPI, -KERBEROS_IV); then it looks for methods that mask your password -(CRAM-MD5, X-OTP); and only if it the server doesn't support any of -those will it ship your password en clair.</p> +<p>When trying to identify you to an IMAP or POP mailserver, +fetchmail now first tries methods that don't require a password +(GSSAPI, KERBEROS_IV); then it looks for methods that mask your +password (CRAM-MD5, X-OTP); and only if it the server doesn't +support any of those will it ship your password en clair.</p> -<p>Setting the <tt>preauth</tt> option to any value other than `password' -will prevent from looking for a password in your <tt>.netrc</tt> file -or querying for it at startup time.</p> +<p>Setting the <tt>preauth</tt> option to any value other than +`password' will prevent from looking for a password in your +<tt>.netrc</tt> file or querying for it at startup time.</p> <h3>If your file predates 5.1.0</h3> @@ -801,283 +963,313 @@ or querying for it at startup time.</p> <h3>If your file predates 4.5.5</h3> -<p>If the <code>dns</code> option is on (the default), you may need to -make sure that any hostname you specify (for mail hosts or for an SMTP -target) is a canonical fully-qualified hostname). In order to avoid -DNS overhead and complications, fetchmail no longer tries to derive -the fetchmail client machine's canonical DNS name at startup.</p> +<p>If the <code>dns</code> option is on (the default), you may need +to make sure that any hostname you specify (for mail hosts or for +an SMTP target) is a canonical fully-qualified hostname). In order +to avoid DNS overhead and complications, fetchmail no longer tries +to derive the fetchmail client machine's canonical DNS name at +startup.</p> <h3>If your file predates 4.0.6:</h3> -<p>Just after the `<CODE>via</CODE>' option was introduced, I realized -that the interactions between the `<CODE>via</CODE>', -`<CODE>aka</CODE>', and `<CODE>localdomains</CODE>' options were out -of control. Their behavior had become complex and confusing, so much so -that I was no longer sure I understood it myself. Users were being -unpleasantly surprised.</p> - -<p>Rather than add more options or crock the code, I re-thought it. The -redesign simplified the code and made the options more orthogonal, but -may have broken some complex multidrop configurations.</p> - -Any multidrop configurations that depended on the name just after the -`<CODE>poll</CODE>' or `<CODE>skip</CODE>' keyword being still -interpreted as a DNS name for address-matching purposes, even in the -presence of a `<CODE>via</CODE>' option, will break.</p> - -<p>It is theoretically possible that other unusual configurations (such -as those using a non-FQDN poll name to generate Kerberos IV tickets) might -also break; the old behavior was sufficiently murky that we can't be -sure. If you think this has happened to you, contact the maintainer.</p> +<p>Just after the `<code>via</code>' option was introduced, I +realized that the interactions between the `<code>via</code>', +`<code>aka</code>', and `<code>localdomains</code>' options were +out of control. Their behavior had become complex and confusing, so +much so that I was no longer sure I understood it myself. Users +were being unpleasantly surprised.</p> + +<p>Rather than add more options or crock the code, I re-thought it. +The redesign simplified the code and made the options more +orthogonal, but may have broken some complex multidrop +configurations.</p> + +<p>Any multidrop configurations that depended on the name just +after the `<code>poll</code>' or `<code>skip</code>' keyword being +still interpreted as a DNS name for address-matching purposes, even +in the presence of a `<code>via</code>' option, will break.</p> + +<p>It is theoretically possible that other unusual configurations +(such as those using a non-FQDN poll name to generate Kerberos IV +tickets) might also break; the old behavior was sufficiently murky +that we can't be sure. If you think this has happened to you, +contact the maintainer.</p> <h3>If your file predates 3.9.5:</h3> -<p>The `<code>remote</code>' keyword has been changed to `<code>folder</code>'. -If you try to use the old keyword, the parser will utter a warning.</p> +<p>The `<code>remote</code>' keyword has been changed to +`<code>folder</code>'. If you try to use the old keyword, the +parser will utter a warning.</p> <h3>If your file predates 3.9:</h3> -<p>It could be because you're using a .fetchmailrc that's written in the -old popclient syntax without an explicit `<CODE>username</CODE>' -keyword leading the first user entry attached to a server entry.</p> +<p>It could be because you're using a .fetchmailrc that's written +in the old popclient syntax without an explicit +`<code>username</code>' keyword leading the first user entry +attached to a server entry.</p> <p>This error can be triggered by having a user option such as -`<CODE>keep</CODE>' or `<CODE>fetchall</CODE>' before the first -explicit username. For example, if you write</p> +`<code>keep</code>' or `<code>fetchall</code>' before the first +explicit username. For example, if you write</p> <pre> poll openmail protocol pop3 - keep user "Hal DeVore" there is hdevore here + keep user "Hal DeVore" there is hdevore here </pre> -<p>the `<CODE>keep</CODE>' option will generate an entire user entry with -the default username (the name of fetchmail's invoking user).</p> +<p>the `<code>keep</code>' option will generate an entire user +entry with the default username (the name of fetchmail's invoking +user).</p> -<p>The popclient compatibility syntax was removed in 4.0. It complicated -the configuration file grammar and confused users.</p> +<p>The popclient compatibility syntax was removed in 4.0. It +complicated the configuration file grammar and confused users.</p> <h3>If your file predates 2.8:</h3> -<p>The `<CODE>interface</CODE>', `<CODE>monitor</CODE>' and -`<CODE>batchlimit</CODE>' options changed after 2.8.</p> +<p>The `<code>interface</code>', `<code>monitor</code>' and +`<code>batchlimit</code>' options changed after 2.8.</p> -<p>They used to be global options with `<CODE>set</CODE>' syntax like the -batchlimit and logfile options. Now they're per-server options, like -`<CODE>protocol</CODE>'.</p> +<p>They used to be global options with `<code>set</code>' syntax +like the batchlimit and logfile options. Now they're per-server +options, like `<code>protocol</code>'.</p> <p>If you had something like</p> <pre> - set interface = "sl0/10.0.2.15" + set interface = "sl0/10.0.2.15" </pre> -<p>in your .fetchmailrc file, simply delete that line and insert -`interface sl0/10.0.2.15' in the server options part of your `defaults' -declaration.</p> +<p>in your .fetchmailrc file, simply delete that line and insert +`interface sl0/10.0.2.15' in the server options part of your +`defaults' declaration.</p> -<p>Do similarly for any `<CODE>monitor</CODE>' or `<CODE>batchlimit</CODE>' options.</p> +<p>Do similarly for any `<code>monitor</code>' or +`<code>batchlimit</code>' options.</p> -<hr> -<h2><a name="F2">F2. The .fetchmailrc parser won't accept my all-numeric user name.</a></h2> +<hr /> +<h2><a id="F2" name="F2">F2. The .fetchmailrc parser won't accept +my all-numeric user name.</a></h2> -<p>Either upgrade to a post-5.0.5 fetchmail or put string quotes around it. :-)</p> +<p>Either upgrade to a post-5.0.5 fetchmail or put string quotes +around it. :-)</p> -<p>The configuration file parser in older fetchmail versions treated any -all-numeric token as a number, which confused it when it was -expecting a name. String quoting forces the token's class.</p> +<p>The configuration file parser in older fetchmail versions +treated any all-numeric token as a number, which confused it when +it was expecting a name. String quoting forces the token's +class.</p> <p>The lexical analyzer in 5.0.6 and beyond is smarter and assumes -any token following "username" or "password" is a string. +any token following "username" or "password" is a string.</p> -<hr> -<h2><a name="F3">F3. The .fetchmailrc parser won't accept my host or username beginning with `no'.</a></h2> +<hr /> +<h2><a id="F3" name="F3">F3. The .fetchmailrc parser won't accept +my host or username beginning with `no'.</a></h2> -See <a href="#F2">F2</a> You're caught in an unfortunate crack between -the newer-style syntax for negated options (`no keep', `no rewrite' -etc.) and the older style run-on syntax (`nokeep', `norewrite' -etc.).</p> +<p>See <a href="#F2">F2</a> You're caught in an unfortunate crack +between the newer-style syntax for negated options (`no keep', `no +rewrite' etc.) and the older style run-on syntax (`nokeep', +`norewrite' etc.).</p> -<p>Upgrade to a 5.0.6 or later fetchmail, or put string quotes around your -token.</p> +<p>Upgrade to a 5.0.6 or later fetchmail, or put string quotes +around your token.</p> -<hr> -<h2><a name="F4">F4. I'm getting a `parse error' message I don't understand.</a></h2> +<hr /> +<h2><a id="F4" name="F4">F4. I'm getting a `parse error' message I +don't understand.</a></h2> -<p>The most common cause of mysterious parse errors is putting a server -option after a user option. Check the manual page; you'll probably -find that by moving one or more options closer to the `poll' keyword -you can eliminate the problem.</p> +<p>The most common cause of mysterious parse errors is putting a +server option after a user option. Check the manual page; you'll +probably find that by moving one or more options closer to the +`poll' keyword you can eliminate the problem.</p> <p>Yes, I know these ordering restrictions are hard to understand. -Unfortunately, they're necessary in order to allow the `defaults' +Unfortunately, they're necessary in order to allow the `defaults' feature to work.</p> -<hr> -<h2><a name="C1">C1. Why do I need a .fetchmailrc when running as root on my own machine?</a></h2> +<hr /> +<h2><a id="C1" name="C1">C1. Why do I need a .fetchmailrc when +running as root on my own machine?</a></h2> <p>Ian T. Zimmerman <itz@rahul.net> asked:</p> -<p>On the machine where I'm the only real user, I run fetchmail as root -from a cron job, like this:</p> +<p>On the machine where I'm the only real user, I run fetchmail as +root from a cron job, like this:</p> <pre> fetchmail -u "itz" -p POP3 -s bolero.rahul.net </pre> -<p>This used to work as is (with no .fetchmailrc file in root's home -directory) with the last version I had (1.7 or 1.8, I don't -remember). But with 2.0, it RECPs all mail to the local root user, -unless I create a .fetchmailrc in root's home directory containing:</p> +<p>This used to work as is (with no .fetchmailrc file in root's +home directory) with the last version I had (1.7 or 1.8, I don't +remember). But with 2.0, it RECPs all mail to the local root user, +unless I create a .fetchmailrc in root's home directory +containing:</p> <pre> skip bolero.rahul.net proto POP3 user itz is itz </pre> -<p>It won't work if the second line is just "<CODE>user itz</CODE>". -This is silly.</p> +<p>It won't work if the second line is just "<code>user +itz</code>". This is silly.</p> -<p>It seems fetchmail decides to RECP the `default local user' (i.e. the -uid running fetchmail) unless there are local aliases, and the -`default' aliases (itz->itz) don't count. They should.</p> +<p>It seems fetchmail decides to RECP the `default local user' +(i.e. the uid running fetchmail) unless there are local aliases, +and the `default' aliases (itz->itz) don't count. They +should.</p> <p>Answer:</p> -<p>No they shouldn't. I thought about this for a while, and I don't much -like the conclusion I reached, but it's unavoidable. The problem is -that fetchmail has no way to know, in general, that a local user `itz' -actually exists.</p> +<p>No they shouldn't. I thought about this for a while, and I don't +much like the conclusion I reached, but it's unavoidable. The +problem is that fetchmail has no way to know, in general, that a +local user `itz' actually exists.</p> -<p>"Ah!" you say, "Why doesn't it check the password file to see if the remote -name matches a local one?" Well, there are two reasons.</p> +<p>"Ah!" you say, "Why doesn't it check the password file to see if +the remote name matches a local one?" Well, there are two +reasons.</p> -<p>One: it's not always possible. Suppose you have an SMTP host declared -that's not the machine fetchmail is running on? You lose.</p> +<p>One: it's not always possible. Suppose you have an SMTP host +declared that's not the machine fetchmail is running on? You +lose.</p> -<p>Two: How do you know server itz and SMTP-host itz are the same person? -They might not be, and fetchmail shouldn't assume they are unless -local-itz can explicitly produce credentials to prove it (that is, the -server-itz password in local-itz's .fetchmailrc file.).</p> +<p>Two: How do you know server itz and SMTP-host itz are the same +person? They might not be, and fetchmail shouldn't assume they are +unless local-itz can explicitly produce credentials to prove it +(that is, the server-itz password in local-itz's .fetchmailrc +file.).</p> -<p>Once you start running down possible failure modes and thinking about -ways to tinker with the mapping rules, you'll quickly find that all the -alternatives to the present default are worse or unacceptably -more complicated or both.</p> +<p>Once you start running down possible failure modes and thinking +about ways to tinker with the mapping rules, you'll quickly find +that all the alternatives to the present default are worse or +unacceptably more complicated or both.</p> -<hr> -<h2><a name="C2">C2. How can I arrange for a fetchmail daemon to get killed when I log out?</a></h2> +<hr /> +<h2><a id="C2" name="C2">C2. How can I arrange for a fetchmail +daemon to get killed when I log out?</a></h2> <p>The easiest way to dispatch fetchmail on logout (which will work reliably only if you have just one login going at any time) is to -arrange for the command `fetchmail -q' to be called on logout. Under -bash, you can arrange this by putting `fetchmail -q' in the file -`~/.bash_logout'. Most csh variants execute `~/.logout' on logout. -For other shells, consult your shell manual page.</p> - -<p>Automatic startup/shutdown of fetchmail is a little harder to arrange -if you may have multiple login sessions going. In the contrib -subdirectory of the fetchmail distribution there is some shell code -you can add to your .bash_login and .bash_logout profiles that will -accomplish this. Thank James Laferriere <babydr@nwrain.net> for -it.</p> - -<p>Some people start up and shut down fetchmail using the ppp-up and -ppp-down scripts of pppd.</p> - -<hr> -<h2><a name="C3">C3. How do I know what interface and address to use with --interface?</a></h2> - -<p>This depends a lot on your local networking configuration (and right -now you can't use it at all except under Linux and the newer BSDs). However, -here are some important rules of thumb that can help. If they don't -work, ask your local sysop or your Internet provider.</p> - -<p>First, you may not need to use --interface at all. If your machine -only ever does SLIP or PPP to one provider, it's almost certainly by a -point to point modem connection to your provider's local subnet that's -pretty secure against snooping (unless someone can tap your phone or -the provider's local subnet!). Under these circumstances, specifying -an interface address is fairly pointless.</p> +arrange for the command `fetchmail -q' to be called on logout. +Under bash, you can arrange this by putting `fetchmail -q' in the +file `~/.bash_logout'. Most csh variants execute `~/.logout' on +logout. For other shells, consult your shell manual page.</p> + +<p>Automatic startup/shutdown of fetchmail is a little harder to +arrange if you may have multiple login sessions going. In the +contrib subdirectory of the fetchmail distribution there is some +shell code you can add to your .bash_login and .bash_logout +profiles that will accomplish this. Thank James Laferriere +<babydr@nwrain.net> for it.</p> + +<p>Some people start up and shut down fetchmail using the ppp-up +and ppp-down scripts of pppd.</p> + +<hr /> +<h2><a id="C3" name="C3">C3. How do I know what interface and +address to use with --interface?</a></h2> + +<p>This depends a lot on your local networking configuration (and +right now you can't use it at all except under Linux and the newer +BSDs). However, here are some important rules of thumb that can +help. If they don't work, ask your local sysop or your Internet +provider.</p> + +<p>First, you may not need to use --interface at all. If your +machine only ever does SLIP or PPP to one provider, it's almost +certainly by a point to point modem connection to your provider's +local subnet that's pretty secure against snooping (unless someone +can tap your phone or the provider's local subnet!). Under these +circumstances, specifying an interface address is fairly +pointless.</p> <p>What the option is really for is sites that use more than one -provider. Under these circumstances, typically one of your provider +provider. Under these circumstances, typically one of your provider IP addresses is your mailserver (reachable fairly securely via the modem and provider's subnet) but the others might ship your packets (including your password) over unknown portions of the general -Internet that could be vulnerable to snooping. What you'll use ---interface for is to make sure your password only goes over the +Internet that could be vulnerable to snooping. What you'll use +--interface for is to make sure your password only goes over the one secure link.</p> <p>To determine the device:</p> <ol> -<li> If you're using a SLIP link, the correct device is probably sl0. -<li> If you're using a PPP link, the correct device is probably ppp0. -<li> If you're using a direct connection over a local network such as - an ethernet, use the command `netstat -r' to look at your routing table. - Try to match your mailserver name to a destination entry; if you don't - see it in the first column, use the `default' entry. The device name - will be in the rightmost column. +<li>If you're using a SLIP link, the correct device is probably +sl0.</li> + +<li>If you're using a PPP link, the correct device is probably +ppp0.</li> + +<li>If you're using a direct connection over a local network such +as an ethernet, use the command `netstat -r' to look at your +routing table. Try to match your mailserver name to a destination +entry; if you don't see it in the first column, use the `default' +entry. The device name will be in the rightmost column.</li> </ol> <p>To determine the address and netmask:</p> <ol> -<li> If you're talking to slirp, the correct address is probably 10.0.2.15, - with no netmask specified. (It's possible to configure slirp to present - other addresses, but that's the default.) - -<li> If you have a static IP address, run `ifconfig <device>', where <device> - is whichever one you've determined. Use the IP address given after - "inet addr:". That is the IP address for your end of the link, and is - what you need. You won't need to specify a netmask. - -<li> If you have a dynamic IP address, your connection IP will vary randomly - over some given range (that is, some number of the least significant bits - change from connection to connection). You need to declare an address - with the variable bits zero and a complementary netmask that sets - the range. +<li>If you're talking to slirp, the correct address is probably +10.0.2.15, with no netmask specified. (It's possible to configure +slirp to present other addresses, but that's the default.)</li> + +<li>If you have a static IP address, run `ifconfig <device>', +where <device> is whichever one you've determined. Use the IP +address given after "inet addr:". That is the IP address for your +end of the link, and is what you need. You won't need to specify a +netmask.</li> + +<li>If you have a dynamic IP address, your connection IP will vary +randomly over some given range (that is, some number of the least +significant bits change from connection to connection). You need to +declare an address with the variable bits zero and a complementary +netmask that sets the range.</li> </ol> -<p>To illustrate the rule for dynamic IP addresses, let's suppose you're -hooked up via SLIP and your IP provider tells you that the dynamic -address pool is 255 addresses ranging from 205.164.136.1 to -205.164.136.255. Then</p> +<p>To illustrate the rule for dynamic IP addresses, let's suppose +you're hooked up via SLIP and your IP provider tells you that the +dynamic address pool is 255 addresses ranging from 205.164.136.1 to +205.164.136.255. Then</p> <pre> - interface "sl0/205.164.136.0/255.255.255.0" + interface "sl0/205.164.136.0/255.255.255.0" </pre> -<p>would work. To range over any value of the last two octets +<p>would work. To range over any value of the last two octets (65536 addresses) you would use</p> <pre> - interface "sl0/205.164.0.0/255.255.0.0" + interface "sl0/205.164.0.0/255.255.0.0" </pre> -<hr> -<h2><a name="C4">C4. How can I set up support for sendmail's anti-spam features?</a></h2> +<hr /> +<h2><a id="C4" name="C4">C4. How can I set up support for +sendmail's anti-spam features?</a></h2> -<p>This answer covers versions of sendmail from 8.9.3-20 (the version -installed in Red Hat 6.2) upwards. If you have an older version, -upgrade to sendmail 8.9.</p> +<p>This answer covers versions of sendmail from 8.9.3-20 (the +version installed in Red Hat 6.2) upwards. If you have an older +version, upgrade to sendmail 8.9.</p> -<p>Stock sendmails can now do anti-spam exclusions based on a database of -filter rules. The human-readable form of the database is at -<tt>/etc/mail/access</tt>. The database itself is at +<p>Stock sendmails can now do anti-spam exclusions based on a +database of filter rules. The human-readable form of the database +is at <tt>/etc/mail/access</tt>. The database itself is at <tt>/etc/mail/access.db</tt>.</p> <p>The table itself uses email addresses, domain names, and network -numbers as keys. For example,</p> +numbers as keys. For example,</p> + <pre> spammer@aol.com REJECT cyberspammer.com REJECT 192.168.212 REJECT </pre> + <p>would refuse mail from spammer@aol.com, any user from -cyberspammer.com (or any host within the cyberspammer.com domain), and -any host on the 192.168.212.* network. (This feature can be used to -do other things as well; see the <a +cyberspammer.com (or any host within the cyberspammer.com domain), +and any host on the 192.168.212.* network. (This feature can be +used to do other things as well; see the <a href="http://www.sendmail.org/m4/anti-spam.html">sendmail documentation</a> for details)</p> @@ -1089,23 +1281,23 @@ makemap hash deny <deny <p>in /etc/mail.</p> -<p>To test, send a message to your mailing address from that host and -then pop off the message with fetchmail, using the -v argument. You -can monitor the SMTP transaction, and when the FROM address is parsed, -if sendmail sees that it is an address in spamlist, fetchmail will -flush and delete it.</p> +<p>To test, send a message to your mailing address from that host +and then pop off the message with fetchmail, using the -v argument. +You can monitor the SMTP transaction, and when the FROM address is +parsed, if sendmail sees that it is an address in spamlist, +fetchmail will flush and delete it.</p> <p>Under no circumstances put your <strong>mailhost</strong> or <strong>any host you accept mail from</strong> using fetchmail into -your reject file. You <strong>will</strong> lose mail if you do +your reject file. You <strong>will</strong> lose mail if you do this!!!</p> -<hr> -<h2><a name="C5">C5. How can I poll some of my mailboxes more/less -often than others?</a></h2> +<hr /> +<h2><a id="C5" name="C5">C5. How can I poll some of my mailboxes +more/less often than others?</a></h2> <p>Use the <cite>interval</cite> keyword on the ones that should be -checked less often. For example, if you do a poll every 5 minutes, +checked less often. For example, if you do a poll every 5 minutes, and want to poll some mailboxes every 5 minutes and some every 30 minutes, use something like this:</p> @@ -1115,135 +1307,148 @@ poll secondary.example.com proto pop3 interval 6 user ... </pre> <p>Then secondary.example.com will be polled every 6th time that -mainsite.example.com is polled, which with a polling interval of every -5 minutes means that secondary.example.com will be polled every 30 -minutes.</p> - -<hr> -<h2><a name="C6">Fetchmail works OK started up manually, but not from an init script.</a></h2> - -<p>Often, startup scripts have a different environment than an interactive -login shell. For instance, $HOME might point to "/root" when you are -logged in as root, but it might be either unset, or set to "/" when the -startup scripts are running. That means fetchmail at startup can't find -the .fetchmailrc.</p> - -<p>Pick a location (such as /etc/fetchmailrc) and use fetchmail's -f -option to point fetchmail at it. That should solve the problem.</p> +mainsite.example.com is polled, which with a polling interval of +every 5 minutes means that secondary.example.com will be polled +every 30 minutes.</p> + +<hr /> +<h2><a id="C6" name="C6">Fetchmail works OK started up manually, +but not from an init script.</a></h2> + +<p>Often, startup scripts have a different environment than an +interactive login shell. For instance, $HOME might point to "/root" +when you are logged in as root, but it might be either unset, or +set to "/" when the startup scripts are running. That means +fetchmail at startup can't find the .fetchmailrc.</p> + +<p>Pick a location (such as /etc/fetchmailrc) and use fetchmail's +-f option to point fetchmail at it. That should solve the +problem.</p> -<hr> -<h2><a name="C7">C7. How can I forward mail to another host?</a></h2> +<hr /> +<h2><a id="C7" name="C7">C7. How can I forward mail to another +host?</a></h2> -<p>To forward mail to a host other than the one you are running fetchmail -on, use the <code>smtphost</code> or <code>smtpname</code> option. -See the manual page for details.</p> +<p>To forward mail to a host other than the one you are running +fetchmail on, use the <code>smtphost</code> or +<code>smtpname</code> option. See the manual page for details.</p> -<hr> -<h2><a name="T1">T1. How can I use fetchmail with sendmail?</a></h2> +<hr /> +<h2><a id="T1" name="T1">T1. How can I use fetchmail with +sendmail?</a></h2> -<p>For most sendmails, no special configuration is required. Eric Allman -tells me that if <code>FEATURE(always_add_domain)</code> is included -in sendmail's configuration, you can leave the <code>rewrite</code> -option off.</p> +<p>For most sendmails, no special configuration is required. Eric +Allman tells me that if <code>FEATURE(always_add_domain)</code> is +included in sendmail's configuration, you can leave the +<code>rewrite</code> option off.</p> -<p>If your sendmail complains ``sendmail does not relay'', make sure -your sendmail.cf file says <code>Cwlocalhost</code> -so that sendmail recognizes `localhost' as a name of its host.</p> +<p>If your sendmail complains ``sendmail does not relay'', make +sure your sendmail.cf file says <code>Cwlocalhost</code> so that +sendmail recognizes `localhost' as a name of its host.</p> -<p>If you're mailing from another machine on your local network, also -ensure that its IP address is listed in ip_allow or name in name_allow -(usually in /etc/mail/)</p> +<p>If you're mailing from another machine on your local network, +also ensure that its IP address is listed in ip_allow or name in +name_allow (usually in /etc/mail/)</p> -<p>If you find that your sendmail doesn't like the address -`FETCHMAIL-DAEMON@localhost' (which is used in the bouncemail -that fetchmail generates), you may have to set +<p>If you find that your sendmail doesn't like the address +`FETCHMAIL-DAEMON@localhost' (which is used in the bouncemail that +fetchmail generates), you may have to set <code>FEATURE(accept_unqualified_senders)</code>.</p> -<p>Günther Leber reports that Digital Unix sendmails won't work with -fetchmail. The symptom is an error message "<code>553 Local configuration -error, hostname not recognized as local</code>". The problem is that -fetchmail normally feeds sendmail with the client machine's host -address in the MAIL FROM line. These sendmails think this means -they're seeing the result of a mail loop and suppress the mail. You -may be able to work around this by running in <code>--invisible</code> mode.</p> +<p>Günther Leber reports that Digital Unix sendmails won't +work with fetchmail. The symptom is an error message "<code>553 +Local configuration error, hostname not recognized as +local</code>". The problem is that fetchmail normally feeds +sendmail with the client machine's host address in the MAIL FROM +line. These sendmails think this means they're seeing the result of +a mail loop and suppress the mail. You may be able to work around +this by running in <code>--invisible</code> mode.</p> -<p>If you want to support multidrop mode, and you can get access to your -mailserver's sendmail.cf file, it's a good idea to add this rule:</p> +<p>If you want to support multidrop mode, and you can get access to +your mailserver's sendmail.cf file, it's a good idea to add this +rule:</p> <pre> H?l?Delivered-To: $h </pre> -<p>This will cause the mailserver's sendmail to reliably write the -appropriate envelope address into each message before fetchmail sees -it, and tell fetchmail which header it is. With this change, -multidrop mode should work reliably even when the Received header -omits the envelope address (which will typically be the case when -the message has multiple recipients). However it will still not -distinguish the recipients, your only advantage is that no bounce -will be sent if a message is BCC addressed to multiple users at -your site. To fix even that problem, you might want to try the -following hack, which is however untested and quite experimental:</p> +<p>This will cause the mailserver's sendmail to reliably write the +appropriate envelope address into each message before fetchmail +sees it, and tell fetchmail which header it is.  With this +change, multidrop mode should work reliably even when the Received +header omits the envelope address (which will typically be the case +when the message has multiple recipients).  However it will +still not distinguish the recipients, your only advantage is that +no bounce will be sent if a message is BCC addressed to multiple +users at your site.  To fix even that problem, you might want +to try the following hack, which is however untested and quite +experimental:</p> <pre> H?J?Delivered-To: $u -Mmdrop, P=/usr/bin/procmail, F=lsDFMqSPfhnu9J, - S=EnvFromSMTP/HdrFromSMTP, R=EnvToSMTP/HdrToSMTP, - T=DNS/RFC822/X-Unix, - A=procmail -Y -a $u -d $h +Mmdrop, P=/usr/bin/procmail, F=lsDFMqSPfhnu9J, + S=EnvFromSMTP/HdrFromSMTP, R=EnvToSMTP/HdrToSMTP, + T=DNS/RFC822/X-Unix, + A=procmail -Y -a $u -d $h </pre> -<p>For both hacks, you have to declare `<CODE>envelope -"Delivered-To:"</CODE>' on the fetchmail side, to put the virtual -domain (e.g. `domain.com') with RELAY permission into your access file -and to add a line reading `<CODE>domain.com -local:local-pop-user</CODE>' for the first and `<CODE>domain.com -mdrop:local-pop-user</CODE>' for the second hack to your +<p>For both hacks, you have to declare `<code>envelope +"Delivered-To:"</code>' on the fetchmail side, to put the virtual +domain (e.g. `domain.com') with RELAY permission into your access +file and to add a line reading `<code>domain.com +local:local-pop-user</code>' for the first and `<code>domain.com +mdrop:local-pop-user</code>' for the second hack to your mailertable.</p> -<p>You will notice that if the mail already has a Delivered-To header, -sendmail will not add another. Further, editing sendmail.cf -directly is not very comfortable. Solutions for both problems -can be found in Peter `Rattacresh' Backes' `hybrid' patch against -sendmail. Have a look at it, you can find it in the contrib -subdirectory.</p> - -<p>Feel free to try Martijn Lievaart's detailed recipe in the contrib -subdirectory of the fetchmail source distribution, it attempts -to realize multidrop mailboxes with an external script.</p> - -<p>If for some reason you are invoking sendmail via the <tt>mda</tt> -option (rather than delivering to port 25 via smtp), don't forget to -include the -i switch. Otherwise you will occasionally get mysterious delivery -failures with a SIGPIPE as the sendmail instance dies. The problem is -messages with a single dot at start of a text line.</p> - -<hr> -<h2><a name="T2">T2. How can I use fetchmail with qmail?</a></h2> - -<p>Turn on the <CODE>forcecr</CODE> option; qmail's listener mode doesn't like -header or message lines terminated with bare linefeeds.</p> - -<p>(This information is thanks to Robert de Bath +<p>You will notice that if the mail already has a Delivered-To +header, sendmail will not add another.  Further, editing +sendmail.cf directly is not very comfortable.  Solutions for +both problems can be found in Peter `Rattacresh' Backes' `hybrid' +patch against sendmail.  Have a look at it, you can find it in +the contrib subdirectory.</p> + +<p>Feel free to try Martijn Lievaart's detailed recipe in the +contrib subdirectory of the fetchmail source distribution, it +attempts to realize multidrop mailboxes with an external +script.</p> + +<p>If for some reason you are invoking sendmail via the +<tt>mda</tt> option (rather than delivering to port 25 via smtp), +don't forget to include the -i switch. Otherwise you will +occasionally get mysterious delivery failures with a SIGPIPE as the +sendmail instance dies. The problem is messages with a single dot +at start of a text line.</p> + +<hr /> +<h2><a id="T2" name="T2">T2. How can I use fetchmail with +qmail?</a></h2> + +<p>Turn on the <code>forcecr</code> option; qmail's listener mode +doesn't like header or message lines terminated with bare +linefeeds.</p> + +<p>(This information is thanks to Robert de Bath <robert@mayday.cix.co.uk>.)</p> <p>If a mailhost is using the qmail package (see <a href="http://pobox.com/~djb/qmail.html">http://pobox.com/~djb/qmail.html</a>) -then, providing the local hosts are also using qmail, it is possible -to set up one fetchmail link to be reliably collect the mail for an -entire domain.</p> - -<p>One of the basic features of qmail is the `Delivered-To:' message -header. Whenever qmail delivers a message to a local mailbox it puts -the username and hostname of the envelope recipient on this line. The -major reason for this is to prevent mail loops. </p> - -<p>To set up qmail to batch mail for a disconnected site the ISP-mailhost -will have normally put that site in its `virtualhosts' control file so -it will add a prefix to all mail addresses for this site. This results -in mail sent to 'username@userhost.userdom.dom.com' having a -'Delivered-To:' line of the form:</p> +then, providing the local hosts are also using qmail, it is +possible to set up one fetchmail link to be reliably collect the +mail for an entire domain.</p> + +<p>One of the basic features of qmail is the `Delivered-To:' +message header. Whenever qmail delivers a message to a local +mailbox it puts the username and hostname of the envelope recipient +on this line. The major reason for this is to prevent mail +loops.</p> + +<p>To set up qmail to batch mail for a disconnected site the +ISP-mailhost will have normally put that site in its `virtualhosts' +control file so it will add a prefix to all mail addresses for this +site. This results in mail sent to +'username@userhost.userdom.dom.com' having a 'Delivered-To:' line +of the form:</p> <pre> Delivered-To: mbox-userstr-username@userhost.userdom.dom.com @@ -1262,18 +1467,19 @@ but a string matching the user host name is likely.</p> <ol> <li>Ensure the option `envelope Delivered-To:' is in the fetchmail - config file. +config file.</li> <li>Ensure you have a localdomains containing 'userdom.dom.com' or - `userhost.dom.com' respectively. +`userhost.dom.com' respectively.</li> </ol> -<p>So far this reliably delivers messages to the correct machine of the -local network, to deliver to the correct user the 'mbox-userstr-' -prefix must be stripped off of the user name. This can be done by -setting up an alias within the qmail MTA on each local machine. -Simply create a dot-qmail file called '.qmail-mbox-userstr-default' -in the alias directory (normally /var/qmail/alias) with the contents:</p> +<p>So far this reliably delivers messages to the correct machine of +the local network, to deliver to the correct user the +'mbox-userstr-' prefix must be stripped off of the user name. This +can be done by setting up an alias within the qmail MTA on each +local machine. Simply create a dot-qmail file called +'.qmail-mbox-userstr-default' in the alias directory (normally +/var/qmail/alias) with the contents:</p> <pre> | ../bin/qmail-inject -a -f"$SENDER" "${LOCAL#mbox-userstr-}@$HOST" @@ -1283,174 +1489,188 @@ in the alias directory (normally /var/qmail/alias) with the contents:</p> <p>Peter Wilson adds:</p> -<p>``My ISP uses "alias-unzzippedcom-" as the prefix, which means that I -need to name my file ".qmail-unzzippedcom-default". This is due to -qmail's assumption that a message sent to user-xyz is handled by the -file ~user/.qmail-xyz (or ~user/.qmail-default).''</p> +<p>``My ISP uses "alias-unzzippedcom-" as the prefix, which means +that I need to name my file ".qmail-unzzippedcom-default". This is +due to qmail's assumption that a message sent to user-xyz is +handled by the file ~user/.qmail-xyz (or +~user/.qmail-default).''</p> <p>Luca Olivetti adds:</p> -<p>If you aren't using qmail locally, or you don't want to set up the -alias mechanism described above, you can use the option `<code>qvirtual -"mbox-userstr-"</code>' in your fetchmail config file to strip the prefix -from the local user name.</p> +<p>If you aren't using qmail locally, or you don't want to set up +the alias mechanism described above, you can use the option +`<code>qvirtual "mbox-userstr-"</code>' in your fetchmail config +file to strip the prefix from the local user name.</p> -<hr> -<h2><a name="T3">T3. How can I use fetchmail with exim?</a></h2> +<hr /> +<h2><a id="T3" name="T3">T3. How can I use fetchmail with +exim?</a></h2> -<p>If you have <CODE>rewrite</CODE> on: </p> +<p>If you have <code>rewrite</code> on:</p> -<p>There is an RFC1123 requirement that MAIL FROM and RCPT TO addresses -you pass to it have to be canonical (e.g. with a fully qualified -hostname part). Therefore fetchmail tries to pass fully qualified -RCPT TO addresses. But exim does not by default accept `localhost' as -a fully qualified domain. This can be fixed.</p> +<p>There is an RFC1123 requirement that MAIL FROM and RCPT TO +addresses you pass to it have to be canonical (e.g. with a fully +qualified hostname part). Therefore fetchmail tries to pass fully +qualified RCPT TO addresses. But exim does not by default accept +`localhost' as a fully qualified domain. This can be fixed.</p> -<p>In exim.conf, add `localhost' to your local_domains declaration if it's not -already present. For example, the author's site at thyrsus.com would -have a line reading:</p> +<p>In exim.conf, add `localhost' to your local_domains declaration +if it's not already present. For example, the author's site at +thyrsus.com would have a line reading:</p> <pre> local_domains = thyrsus.com:localhost </pre> -<p>If you have <CODE>rewrite</CODE> off:</p> +<p>If you have <code>rewrite</code> off:</p> -<p>MAIL FROM is a potential problem if the MTAs upstream from your fetchmail -don't necessarily pass canonicalized From and Return-Path addresses, -and fetchmail's <CODE>rewrite</CODE> option is off. The specific case -where this has come up involves bounce messages generated by sendmail -on your mailer host, which have the (un-canonicalized) origin address -MAILER-DAEMON.</p> +<p>MAIL FROM is a potential problem if the MTAs upstream from your +fetchmail don't necessarily pass canonicalized From and Return-Path +addresses, and fetchmail's <code>rewrite</code> option is off. The +specific case where this has come up involves bounce messages +generated by sendmail on your mailer host, which have the +(un-canonicalized) origin address MAILER-DAEMON.</p> -<p>The right way to fix this is to enable the <CODE>rewrite</CODE> option and -have fetchmail canonicalize From and Return-Path addresses with the -mailserver hostname before exim sees them. This option is enabled by -default, so it won't be off unless you turned it off.</p> +<p>The right way to fix this is to enable the <code>rewrite</code> +option and have fetchmail canonicalize From and Return-Path +addresses with the mailserver hostname before exim sees them. This +option is enabled by default, so it won't be off unless you turned +it off.</p> -<p>If you must run with <CODE>rewrite</CODE> off, there is a switch in exim's -configuration files that allows it to accept domainless MAIL FROM -addresses; you will have to flip it by putting the line </p> +<p>If you must run with <code>rewrite</code> off, there is a switch +in exim's configuration files that allows it to accept domainless +MAIL FROM addresses; you will have to flip it by putting the +line</p> <pre> sender_unqualified_hosts = localhost </pre> -<p>in the main section of the exim configuration file. Note that this -will result in such messages having an incorrect domain name attached -to their return address (your SMTP listener's hostname rather than -that of the remote mail server).</p> +<p>in the main section of the exim configuration file. Note that +this will result in such messages having an incorrect domain name +attached to their return address (your SMTP listener's hostname +rather than that of the remote mail server).</p> -<hr> -<h2><a name="T4">T4. How can I use fetchmail with smail?</a></h2> +<hr /> +<h2><a id="T4" name="T4">T4. How can I use fetchmail with +smail?</a></h2> -<p>Smail 3.2 is very nearly plug-compatible with sendmail, and may work -fine out of the box.</p> +<p>Smail 3.2 is very nearly plug-compatible with sendmail, and may +work fine out of the box.</p> <p>We have one report that when processing multiple messages from a -single fetchmail session, smail sometimes delivers them in an -order other than received-date order. This can be annoying because it -scrambles conversational threads. This is not fetchmail's problem, +single fetchmail session, smail sometimes delivers them in an order +other than received-date order. This can be annoying because it +scrambles conversational threads. This is not fetchmail's problem, it is an smail `feature' and has been reported to the maintainers as a bug.</p> -<p>Very recent smail versions require an <code>-smtp_hello_verify</code> -option in the smail config file. This overrides smail's check to see -that the HELO address is actually that of the client machine, which -is never going to be the case when fetchmail is in the picture. -According to RFC1123 an SMTP listener <em>must</em> allow this -mismatch, so smail's new behavior (introduced sometime between -3.2.0.90 and 3.2.0.95) is a bug.</p> +<p>Very recent smail versions require an +<code>-smtp_hello_verify</code> option in the smail config file. +This overrides smail's check to see that the HELO address is +actually that of the client machine, which is never going to be the +case when fetchmail is in the picture. According to RFC1123 an SMTP +listener <em>must</em> allow this mismatch, so smail's new behavior +(introduced sometime between 3.2.0.90 and 3.2.0.95) is a bug.</p> <p>You may also need to say -<code>-smtp_hello_broken_allow=127.0.0.1</code> -in order for smail to accept the "localhost" that fetchmail normally -appends to recipient addresses.</p> +<code>-smtp_hello_broken_allow=127.0.0.1</code> in order for smail +to accept the "localhost" that fetchmail normally appends to +recipient addresses.</p> -<hr> -<h2><a name="T5">T5. How can I use fetchmail with SCO's MMDF?</a></h2> +<hr /> +<h2><a id="T5" name="T5">T5. How can I use fetchmail with SCO's +MMDF?</a></h2> <p>MMDF itself is difficult to configure, but it turns out that -connecting fetchmail to MMDF's SMTP channel isn't that hard. -You can read an <a -href="http://www.aplawrence.com/Unixart/uucptofetch.html"> -MMDF recipe</a> that describes replacing a UUCP link with -fetchmail feeding MMDF.</p> +connecting fetchmail to MMDF's SMTP channel isn't that hard. You +can read an <a +href="http://www.aplawrence.com/Unixart/uucptofetch.html">MMDF +recipe</a> that describes replacing a UUCP link with fetchmail +feeding MMDF.</p> -<hr> -<h2><a name="T6">T6. How can I use fetchmail with Lotus Notes?</a></h2> +<hr /> +<h2><a id="T6" name="T6">T6. How can I use fetchmail with Lotus +Notes?</a></h2> -<p>The Lotus Notes SMTP gateway tries to deduce when it should convert \n -to \r\n, but its rules are not the intuitive and correct-for-RFC822 -ones. Use `forcecr'.</p> +<p>The Lotus Notes SMTP gateway tries to deduce when it should +convert \n to \r\n, but its rules are not the intuitive and +correct-for-RFC822 ones. Use `forcecr'.</p> -<a name="T7">T7. How can I use fetchmail with Courier IMAP?</a></h2> +<h2><a id="T7" name="T7">T7. How can I use fetchmail with Courier +IMAP?</a></h2> -<p>The courier mta doesn't like RCPT addresses that look like -<code>someone@localhost</code>. Work around this with an +<p>The courier mta doesn't like RCPT addresses that look like +<code>someone@localhost</code>. Work around this with an <code>smtphost</code> or <code>smtpaddress</code>.</p> -<hr> -<h2><a name="S1">S1. How can I use fetchmail with qpopper?</a></h2> - -Qualcomm's qpopper is probably the best-of-breed among POP3 servers, and -is very widely deployed. Nevertheless, it has some problems which -fetchmail exposes. We recommend using <a href="#G8">IMAP</a> instead if at -all possible. If you must talk to qpopper, here are some problems to -be aware of:</p> - -<p><h3>Problems with retrieving large messages from qpopper 2.53</h3> - -Tony Tang <a href="mailto:tony@atn.com.hk"><tony@atn.com.hk></a> -reports that there is a bad intercation between fetchmail and qpopper -2.5.3 under Red Hat Linux versions 5.0 to 5.2, kernels 2.0.34 to -2.0.35. When fetching very large messages (over 700K) from 2.5.3, -fetchmail will hang with a socket error.</p> - -<p>This is probably not a fetchmail bug, but rather a symptom of some -problem in the networking stack that qpopper's transmission pattern is -tickling, as fetchpop (another Linux POP client) also displays the hang -but Netscape running under Win95 does not. The problem can also be -banished by <a -href="http://www.eudora.com/freeware/qpop.html">upgrading to qpopper -3.0b1</a>.</p> +<hr /> +<h2><a id="S1" name="S1">S1. How can I use fetchmail with +qpopper?</a></h2> + +<p>Qualcomm's qpopper is probably the best-of-breed among POP3 +servers, and is very widely deployed. Nevertheless, it has some +problems which fetchmail exposes. We recommend using <a +href="#G8">IMAP</a> instead if at all possible. If you must talk to +qpopper, here are some problems to be aware of:</p> + +<h3>Problems with retrieving large messages from qpopper 2.53</h3> + +<p>Tony Tang <a +href="mailto:tony@atn.com.hk"><tony@atn.com.hk></a> reports +that there is a bad intercation between fetchmail and qpopper 2.5.3 +under Red Hat Linux versions 5.0 to 5.2, kernels 2.0.34 to 2.0.35. +When fetching very large messages (over 700K) from 2.5.3, fetchmail +will hang with a socket error.</p> + +<p>This is probably not a fetchmail bug, but rather a symptom of +some problem in the networking stack that qpopper's transmission +pattern is tickling, as fetchpop (another Linux POP client) also +displays the hang but Netscape running under Win95 does not. The +problem can also be banished by <a +href="http://www.eudora.com/freeware/qpop.html">upgrading to +qpopper 3.0b1</a>.</p> <h3>Bad interaction with fetchmail 4.4.2 to 4.4.7</h3> -<p>Versions of fetchmail from 4.4.2 through 4.4.7 had a bad interaction -with Eudora qpopper versions 2.3 and later. See <a href="#X5">X5</a> -for details. The solution is to upgrade your fetchmail.</p> +<p>Versions of fetchmail from 4.4.2 through 4.4.7 had a bad +interaction with Eudora qpopper versions 2.3 and later. See <a +href="#X5">X5</a> for details. The solution is to upgrade your +fetchmail.</p> -<hr> -<h2><a name="S2">S2. How can I use fetchmail with Microsoft Exchange?</a></h2> +<hr /> +<h2><a id="S2" name="S2">S2. How can I use fetchmail with Microsoft +Exchange?</a></h2> -<p>It's been reliably reported that Exchange 2000's POP3 support is so -broken that it's unusable. One symptom is that messages without -a terminating newline get the POP3 message termination dot emitted -- -you guessed it -- right after the last character of the message, with -no terminating newline added. This will hang fetchmail or any other -RFC-compliant server. IMAP is alleged to work OK, though.</p> +<p>It's been reliably reported that Exchange 2000's POP3 support is +so broken that it's unusable. One symptom is that messages without +a terminating newline get the POP3 message termination dot emitted +-- you guessed it -- right after the last character of the message, +with no terminating newline added. This will hang fetchmail or any +other RFC-compliant server. IMAP is alleged to work OK, though.</p> <p>Older versions of Exchange are semi-usable.</p> -<p>Fetchmail using IMAP supports the proprietary NTLM mode used with -M$ Exchange servers. To enable this, configure fetchmail with the ---enable-NTLM option and recompile it. Specify a user option value -that looks like `user@domain': the part to the left of the @ will -be passed as the username and the part to the right as the NTLM domain.</p> - -<p>M$ Exchange violates the POP3 and IMAP RFCs. Its LIST command does -not reveal the real sizes of mail in the pop mailbox, but the sizes of -the compressed versions in the exchange mail database (thanks to Arjan -De Vet and Guido Van Rooij for alerting us to this problem).</p> - -<p>Fetchmail works with M$ Exchange, despite this brain damage. Two -features are compromised. One is that the --limit option will not +<p>Fetchmail using IMAP supports the proprietary NTLM mode used +with M$ Exchange servers. To enable this, configure fetchmail with +the --enable-NTLM option and recompile it. Specify a user option +value that looks like `user@domain': the part to the left of the @ +will be passed as the username and the part to the right as the +NTLM domain.</p> + +<p>M$ Exchange violates the POP3 and IMAP RFCs. Its LIST command +does not reveal the real sizes of mail in the pop mailbox, but the +sizes of the compressed versions in the exchange mail database +(thanks to Arjan De Vet and Guido Van Rooij for alerting us to this +problem).</p> + +<p>Fetchmail works with M$ Exchange, despite this brain damage. Two +features are compromised. One is that the --limit option will not work right (it will check against compressed and not actual sizes). The other is that a too-small SIZE argument may be passed to your ESMTP listener, assuming you're using one (this should not be a -problem unless the actual size of the message is above the listener's -configured length limit).</p> +problem unless the actual size of the message is above the +listener's configured length limit).</p> <p>Somewhat belatedly, I've learned that there's supposed to be a registry bit that can fix this breakage:</p> @@ -1460,25 +1680,38 @@ HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\MsExchangeIs\Parameters System\Pop3 Compatibility </pre> -<p>This is a bitmask that controls the variations from the standard protocol. -The bits defined are:</p> - -<p><DL> -<DT>0x00000001: -<DD>Report exact message sizes for the LIST command -<DT>0x00000002: -<DD>Allow arbitrary linear whitespace between commands and arguments -<DT>0x00000004: -<DD>Enable the LAST command -<DT>0x00000008: -<DD>Allow an empty PASS command (needed for users with blank -passwords, but illegal in the protocol) -<DT>0x00000010: -<DD>Relax the length restrictions for arguments to commands (protocol -requires 40, but some user names may be longer than that). -<DT>0x00000020: -<DD>Allow spaces in the argument to the USER command. -</DL> +<p>This is a bitmask that controls the variations from the standard +protocol. The bits defined are:</p> + +<dl> +<dt>0x00000001:</dt> + +<dd>Report exact message sizes for the LIST command</dd> + +<dt>0x00000002:</dt> + +<dd>Allow arbitrary linear whitespace between commands and +arguments</dd> + +<dt>0x00000004:</dt> + +<dd>Enable the LAST command</dd> + +<dt>0x00000008:</dt> + +<dd>Allow an empty PASS command (needed for users with blank +passwords, but illegal in the protocol)</dd> + +<dt>0x00000010:</dt> + +<dd>Relax the length restrictions for arguments to commands +(protocol requires 40, but some user names may be longer than +that).</dd> + +<dt>0x00000020:</dt> + +<dd>Allow spaces in the argument to the USER command.</dd> +</dl> <p>There's another one that may be useful to know about:</p> @@ -1487,80 +1720,86 @@ KEY_LOCAL_MACHINE\System\CurrentControlSet\Services\MsExchangeIs\Parameters System\Pop3 Performance </pre> -<DL> -<DT>0x00000001: -<DD>Render messages to a temporary stream instead of sending directly -from the database (should always be on) -<DT>0x00000002: -Flag unrenderable messages (instead of just failing commands) -(should only be on if you are seeing the problems reported -in KB Q168109) -<DT>0x00000004: -<DD>Return from the QUIT command before all messages have been deleted. -</DL> - -<p>The Microsoft pod-person who revealed this information to me admitted -that he couldn't find it anywhere in their public knowledge base.</p> - -<p>Another specific problem we have seen with Exchange servers has as its -symptom a response to LOGIN that says "NO Ambiguous Alias". Grant -Edwards writes:</p> - -<p>This means that Exchange Server is too f*&#ing stupid to figure -out which mailbox belongs to you. Instead of actually keeping -track of which inbox belongs to which user, it uses some -half-witted, guess-o-matic heuristic to try to guess your -mailbox name from your username.</p> +<dl> +<dt>0x00000001:</dt> + +<dd>Render messages to a temporary stream instead of sending +directly from the database (should always be on)</dd> + +<dt>0x00000002: Flag unrenderable messages (instead of just failing +commands) (should only be on if you are seeing the problems +reported in KB Q168109)</dt> + +<dt>0x00000004:</dt> + +<dd>Return from the QUIT command before all messages have been +deleted.</dd> +</dl> + +<p>The Microsoft pod-person who revealed this information to me +admitted that he couldn't find it anywhere in their public +knowledge base.</p> + +<p>Another specific problem we have seen with Exchange servers has +as its symptom a response to LOGIN that says "NO Ambiguous Alias". +Grant Edwards writes:</p> + +<p>This means that Exchange Server is too f*&#ing stupid to +figure out which mailbox belongs to you. Instead of actually +keeping track of which inbox belongs to which user, it uses some +half-witted, guess-o-matic heuristic to try to guess your mailbox +name from your username.</p> <p>In your case it doesn't work because your username maps to more -than one mailbox. For some people it doesn't work because -their username maps to zero mailboxes. This is yet another -inept, lame, almost criminally negligent design decision from -our friends in Redmond.</p> +than one mailbox. For some people it doesn't work because their +username maps to zero mailboxes. This is yet another inept, lame, +almost criminally negligent design decision from our friends in +Redmond.</p> <p>You've got several options:</p> <ul> -<li> -Get your administrator to configure the server so that -usernames and mailbox names are the same. -<li> -Get your administrator to add an alias that maps your -username explicitly to your mailbox name. +<li>Get your administrator to configure the server so that +usernames and mailbox names are the same.</li> + +<li>Get your administrator to add an alias that maps your username +explicitly to your mailbox name.</li> </ul> <p>But, the best option involves a tactical nuclear weapon (an old ASROC will do), pissing off a lot people who live downwind from -Redmond, and your choice of any Linux, NetBSD, FreeBSD, or -Solaris CD.</p> +Redmond, and your choice of any Linux, NetBSD, FreeBSD, or Solaris +CD.</p> <p>I'll provide the CD.</p> -<hr> -<h2><a name="S3">S3. How can I use fetchmail with CompuServe RPA?</a></h2> +<hr /> +<h2><a id="S3" name="S3">S3. How can I use fetchmail with +CompuServe RPA?</a></h2> <p>First, make sure your fetchmail has the RPA support compiled in. Stock fetchmail binaries (such as you might get from an RPM) don't. -You can check this by looking at the output of <code>fetchmail -V</code>; -if you see the string "+RPA" after the version ID you're good to go, -otherwise you'll have to build your own from sources (see the INSTALL -file in the source distribution for directions).</p> - -<p>Give your CompuServe pass-phrase in lower case as your password. Add -`@compuserve.com' to your user ID so that it looks like `user +You can check this by looking at the output of <code>fetchmail +-V</code>; if you see the string "+RPA" after the version ID you're +good to go, otherwise you'll have to build your own from sources +(see the INSTALL file in the source distribution for +directions).</p> + +<p>Give your CompuServe pass-phrase in lower case as your password. +Add `@compuserve.com' to your user ID so that it looks like `user <UserID>@compuserve.com', where <UserID> can be either your numerical userID or your E-mail nickname. An RPA-enabled fetchmail will automatically check for csi.com in the POP server's -greeting line. If that's found, and your user ID ends with -`@compuserve.com', it will query the server to see if it -is RPA-capable, and if so do an RPA transaction rather than a +greeting line. If that's found, and your user ID ends with +`@compuserve.com', it will query the server to see if it is +RPA-capable, and if so do an RPA transaction rather than a plain-text password handshake.</p> -<p><strong>Warning:</strong> the debug (-v -v) output of fetchmail will show -your pass-phrase in Unicode!</p> +<p><strong>Warning:</strong> the debug (-v -v) output of fetchmail +will show your pass-phrase in Unicode!</p> -<p>These two .fetchmailrc entries show the difference between an RPA and -non-RPA configuration:</p> +<p>These two .fetchmailrc entries show the difference between an +RPA and non-RPA configuration:</p> <pre> # This version will use RPA @@ -1574,15 +1813,16 @@ poll non-rpa.csi.com via "pop.site1.csi.com" with proto POP3 and options no dns is LOCAL_USER here options fetchall stripcr </pre> -<hr> -<h2><a name="S4">S4. How can I use fetchmail with Demon Internet's SDPS?</a></h2> +<hr /> +<h2><a id="S4" name="S4">S4. How can I use fetchmail with Demon +Internet's SDPS?</a></h2> <h3>Single-drop mode</h3> -<p>You can get fetchmail to download the email for just one user from -Demon Internet's POP3 server by giving it a username consisting of your -Demon user name followed by your account name, with an at-sign between -them.</p> +<p>You can get fetchmail to download the email for just one user +from Demon Internet's POP3 server by giving it a username +consisting of your Demon user name followed by your account name, +with an at-sign between them.</p> <p>For example, to download email for the user <philh@vision25.demon.co.uk>, you could use the following @@ -1596,20 +1836,22 @@ poll pop3.demon.co.uk with protocol POP3: <h3>Multi-drop mode</h3> -<p>Demon Internet's SDPS service is an implementation of POP3. All messages -have a Received: header added when they enter the maildrop, like this:</p> +<p>Demon Internet's SDPS service is an implementation of POP3. All +messages have a Received: header added when they enter the +maildrop, like this:</p> <pre> Received: from punt-1.mail.demon.net by mailstore for fred@xyz.demon.co.uk id 899963657:10:27896:0; Thu, 09 Jul 98 05:54:17 GMT </pre> -<p>To enable multi-drop mode you need to tell fetchmail that 'mailstore' is -the name of the host which accepted the mail, and let it know the -hostname part(s) of your E-mail address. The following example assumes -that your hostname is xyz.demon.co.uk, and that you have also bought -"mail forwarding" for the domain my-company.co.uk (in which case your -MTA must also be configured to accept mail sent to user@my-company.co.uk)</p> +<p>To enable multi-drop mode you need to tell fetchmail that +'mailstore' is the name of the host which accepted the mail, and +let it know the hostname part(s) of your E-mail address. The +following example assumes that your hostname is xyz.demon.co.uk, +and that you have also bought "mail forwarding" for the domain +my-company.co.uk (in which case your MTA must also be configured to +accept mail sent to user@my-company.co.uk)</p> <pre> poll pop3.demon.co.uk proto pop3 aka mailstore no dns: @@ -1617,635 +1859,704 @@ MTA must also be configured to accept mail sent to user@my-company.co.uk)</p> user xyz is * </pre> -<p>Note that Demon may delete mail on the server which is more than 30 -days old; see their <a -href="http://www.demon.net/helpdesk/products/mail/sdps-tech.shtm"l> -POP3 page</a> for details.</p> +<p>Note that Demon may delete mail on the server which is more than +30 days old; see their <a +href="http://www.demon.net/helpdesk/products/mail/sdps-tech.shtm">POP3 +page</a> for details.</p> <h3>The SDPS extension</h3> -<p>There's a different way to do multidrop. It's not necessary on Demon -Internet, since fetchmail can parse Received addresses, but the person -who implemented this didn't know that. It may be useful if Demon -Internet ever changes mail transports.</p> +<p>There's a different way to do multidrop. It's not necessary on +Demon Internet, since fetchmail can parse Received addresses, but +the person who implemented this didn't know that. It may be useful +if Demon Internet ever changes mail transports.</p> -<p>SDPS includes a non-standard extension for retrieving the envelope of a -message (*ENV), which fetchmail optionally supports if compiled with the ---enable-SDPS option. If you have it, the first line of the fetchmail -V -response will include the string "+SDPS".</p> +<p>SDPS includes a non-standard extension for retrieving the +envelope of a message (*ENV), which fetchmail optionally supports +if compiled with the --enable-SDPS option. If you have it, the +first line of the fetchmail -V response will include the string +"+SDPS".</p> <p>Once you have SDPS compiled in, fetchmail in POP3 mode will automatically detect when it's talking to a Demon Internet host in -multidrop mode, and use the *ENV extension to get an envelope To address.</p> +multidrop mode, and use the *ENV extension to get an envelope To +address.</p> <p>The autodetection works by looking at the hostname in the POP3 -greeting line; if you're accessing Demon Internet through a proxy it -may fail. To force SDPS mode, pick "sdps" as your protocol.</p> +greeting line; if you're accessing Demon Internet through a proxy +it may fail. To force SDPS mode, pick "sdps" as your protocol.</p> -<hr> -<h2><a name="S5">S5. How can I use fetchmail with usa.net's servers?</a></h2> +<hr /> +<h2><a id="S5" name="S5">S5. How can I use fetchmail with usa.net's +servers?</a></h2> -<p>Enable `<CODE>fetchall</CODE>'. A user reports that the 2.2 version -of USA.NET's POP server reports that you must use the -`<CODE>fetchall</CODE>' option to make sure that all of the mail is -retrieved, otherwise some may be left on the server. This is almost +<p>Enable `<code>fetchall</code>'. A user reports that the 2.2 +version of USA.NET's POP server reports that you must use the +`<code>fetchall</code>' option to make sure that all of the mail is +retrieved, otherwise some may be left on the server. This is almost certainly a server bug.</p> -<p>The usa.net servers (at least in their 2.2 version, June 1998) don't -handle the TOP command properly, either. Regardless of the argument -you give it, they retrieve only about 10 lines of the message. -Fetchmail normally uses TOP for message retrieval in order to avoid -marking messages seen, but `<CODE>fetchall</CODE>' forces it to use -RETR instead.</p> - -<p>Also, we're told USA.NET adds a ton of hops to your messages. You may -need to raise the MaxHopCount parameter in your sendmail.cf to avoid having -fetched mail rejected.</p> - -<p>(Note: Other failure modes have been reported on usa.net's servers. -They seem to be chronically flaky. We recommend finding another -provider.)</p> - -<hr> -<h2><a name="S6">S6. How can I use fetchmail with HP OpenMail?</a></h2> - -<p>No special configuration is required, but OpenMail versions prior to -6.0 have an annoying bug similar to the big one in <a -href="#S2">Microsoft Exchange</a>. The message sizes it gives in the -LIST are rounded to the nearest 1024 bytes. It also has a nasty habit -of discarding headers it doesn't recognize, such as X- and Resent- -headers.</p> - -<p>As with M$ Exchange, the only real fix for these problems is to get a -POP (or preferably IMAP) server that isn't brain-dead. OpenMail's -project manager claims these bugs have been fixed in 6.0.</p> - -<p>We've had a more recent report (December 2001) that the TOP command -fails, returning only one line regrardless of its argument, on something -identifying itself as "OpenMail POP3 interface".</p> - -<hr> -<h2><a name="S7">S7. How can I use fetchmail with geocities POP3 servers?</a></h2> - -<p>Nathan Cutler reports that the the mail.geocities.com POP3 servers -fail to include the first Received line of the message in the send to -fetchmail. This can solve problems if your MUA interprets Received -continuations as body lines and doesn't parse any of the following -headers.</p> +<p>The usa.net servers (at least in their 2.2 version, June 1998) +don't handle the TOP command properly, either. Regardless of the +argument you give it, they retrieve only about 10 lines of the +message. Fetchmail normally uses TOP for message retrieval in order +to avoid marking messages seen, but `<code>fetchall</code>' forces +it to use RETR instead.</p> + +<p>Also, we're told USA.NET adds a ton of hops to your messages. +You may need to raise the MaxHopCount parameter in your sendmail.cf +to avoid having fetched mail rejected.</p> + +<p>(Note: Other failure modes have been reported on usa.net's +servers. They seem to be chronically flaky. We recommend finding +another provider.)</p> + +<hr /> +<h2><a id="S6" name="S6">S6. How can I use fetchmail with HP +OpenMail?</a></h2> + +<p>No special configuration is required, but OpenMail versions +prior to 6.0 have an annoying bug similar to the big one in <a +href="#S2">Microsoft Exchange</a>. The message sizes it gives in +the LIST are rounded to the nearest 1024 bytes. It also has a nasty +habit of discarding headers it doesn't recognize, such as X- and +Resent- headers.</p> + +<p>As with M$ Exchange, the only real fix for these problems is to +get a POP (or preferably IMAP) server that isn't brain-dead. +OpenMail's project manager claims these bugs have been fixed in +6.0.</p> + +<p>We've had a more recent report (December 2001) that the TOP +command fails, returning only one line regrardless of its argument, +on something identifying itself as "OpenMail POP3 interface".</p> + +<hr /> +<h2><a id="S7" name="S7">S7. How can I use fetchmail with geocities +POP3 servers?</a></h2> + +<p>Nathan Cutler reports that the the mail.geocities.com POP3 +servers fail to include the first Received line of the message in +the send to fetchmail. This can solve problems if your MUA +interprets Received continuations as body lines and doesn't parse +any of the following headers.</p> <p>Workaround is to use "mda" keyword or "-mda" switch:</p> <pre> mda "sed -e '1s/^\t/Received: /' | formail | /usr/bin/procmail -d <user>" </pre> -Replace \t with exactly one tabulation character.</p> -<p>You should also consider using "fetchall" option because Geocities' servers -sometimes think that the first 45 messages have already been read.</p> +<p>Replace \t with exactly one tabulation character.</p> + +<p>You should also consider using "fetchall" option because +Geocities' servers sometimes think that the first 45 messages have +already been read.</p> <p>Fix: Get an email provider that doesn't suck. The pop-up ads on Geocities are lame, you should boycott them anyway.</p> -<hr> -<h2><a name="S8">S8. How can I use fetchmail with Hotmail?</a></h2> +<hr /> +<h2><a id="S8" name="S8">S8. How can I use fetchmail with +Hotmail?</a></h2> -<p>You can't, yet. But <a -href="http://hawkins.emu.id.au/gotmail/">gotmail</a> -might be what you need.</p> +<p>You can't, yet. But <a +href="http://hawkins.emu.id.au/gotmail/">gotmail</a> might be what +you need.</p> -<hr> -<h2><a name="S9">S9. How can I use fetchmail with MSN?</a></h2> +<hr /> +<h2><a id="S9" name="S9">S9. How can I use fetchmail with +MSN?</a></h2> -<p>You can't. MSN uses something that looks like POP3, except the -authentication part is nonstandard. And of course they don't +<p>You can't. MSN uses something that looks like POP3, except the +authentication part is nonstandard. And of course they don't document it, so nobody but their Windows clients can speak it.</p> -<p>This is a customer lock-in tactic; we recommend boycotting MSN as the -only appropriate response.</p> +<p>This is a customer lock-in tactic; we recommend boycotting MSN +as the only appropriate response.</p> <p>As of 5.0.8, we have support for the client side of NTLM -authentication. It's possible this may enable fetchmail to talk to -MSN; if so, somebody should report it so this FAQ can be corrected.</p> +authentication. It's possible this may enable fetchmail to talk to +MSN; if so, somebody should report it so this FAQ can be +corrected.</p> -<hr> -<h2><a name="S10">S10. How can I use fetchmail with SpryNet?</a></h2> +<hr /> +<h2><a id="S10" name="S10">S10. How can I use fetchmail with +SpryNet?</a></h2> -<p>The SpryNet POP3 servers mark a message queried with TOP as seen. -This means that if your connection drops in mid-message, it may end -up invisibly stuck on your mail spool. Use the <code>fetchall</code> -flag to ensure that it's recovered on the next cycle.</p> +<p>The SpryNet POP3 servers mark a message queried with TOP as +seen. This means that if your connection drops in mid-message, it +may end up invisibly stuck on your mail spool. Use the +<code>fetchall</code> flag to ensure that it's recovered on the +next cycle.</p> -<hr> -<h2><a name="S11">S11. How can I use fetchmail with FTGate?</a></h2> +<hr /> +<h2><a id="S11" name="S11">S11. How can I use fetchmail with +FTGate?</a></h2> -<p>The FTGate V2 server (and possibly older versions as well) has a weird -bug. It answers OK twice to a TOP request! Use the -<code>fetchall</code> option to force use of RETR and work around this -bug.</p> +<p>The FTGate V2 server (and possibly older versions as well) has a +weird bug. It answers OK twice to a TOP request! Use the +<code>fetchall</code> option to force use of RETR and work around +this bug.</p> -<hr> -<h2><a name="S12">S12. How can I use fetchmail with MailMax?</a></h2> +<hr /> +<h2><a id="S12" name="S12">S12. How can I use fetchmail with +MailMax?</a></h2> -<p>You can't. At least not if you want to be able to see attachments. -MailMax has a bug; it reports the message length with attachments -but doesn't download them on TOP or RETR.</p> +<p>You can't. At least not if you want to be able to see +attachments. MailMax has a bug; it reports the message length with +attachments but doesn't download them on TOP or RETR.</p> <p>Also, we're told that TOP sometimes fails to retrieve the entire message even when enough lines have been specified. The MailMax -developers have acknowledged this bug as of 4 May 2000, but there is -no fix yet. If you must use this server, force RETR with the +developers have acknowledged this bug as of 4 May 2000, but there +is no fix yet. If you must use this server, force RETR with the <tt>fetchall</tt> option.</p> -<hr> -<h2><a name="S13">S13. How can I use fetchmail with Novell GroupWise?</a></h2> - -<p>The Novell GroupWise IMAP server would be better named GroupFoolish; -it is (according to the designer of IMAP) unusably broken. Among -other things, it doesn't include a required content length in its -BODY[TEXT] response.</p> - -<p>Fetchmail works around this problem, but we strongly recommend voting -with your dollars for a server that isn't brain-dead. If you stick -with code as shoddy as GroupWise seems to be, you will probably pay -for it with other problems.</p> - -<hr> -<h2><a name="S14">S14. How can I use fetchmail with InterChange?</a></h2> - -<p>You can't. At least not if you want to be able to see attachments. -InterChange has a bug similar to the MailMax server; it reports the -message length with attachments but doesn't download them on TOP or -RETR.</p> - -<p>On Jan 9 2001, the people at InfiniteMail sent me mail informing me that -their new 3.61.08 release of InterChange fixes this problem. I don't -have any reports one way or the other yet.</p> - -<a name="S15">S15. How can I use fetchmail with GMX?</a></h2> - -<p>Use IMAP. The GMX StreamProxy server behaves badly on -authentication failures, sending back a non-conformant error message -(missing an <code>-ERR</code> tag) that confuses fetchmail.</p> - -<hr> -<h2><a name="K1">K1. How can I use fetchmail with SOCKS?</a></h2> - -<p>Giuseppe Guerini added a --with-socks option that supports linking -with socks library. If you specify the value of this option as -``yes'', the configure script will try to find the Rconnect library -and set the makefile up to link it. You can also specify a directory -containing the Rconnect library.</p> - -<p>Alan Schmitt has added a similar --with-socks5 option that may work -better if you have a recent version of the SOCKS library.</p> - -<hr> -<h2><a name="K2">K2. How can I use fetchmail with IPv6 and IPsec?</a></h2> - -<p>To use fetchmail with IPv6, you need a system that supports IPv6, the "Basic -Socket Interface Extensions for IPv6" (RFC 2133). -This currently means that you need to have a BSD/OS or NetBSD system with -the NRL IPv6+IPsec software distribution or a Linux system with a 2.2 or -later kernel and net-tools. It should not be hard to build fetchmail on -other IPv6 implementations if you can port the inet6-apps kit.</p> - -<p>To use fetchmail with networking security (read: IPsec), you need a -system that supports IPsec, the API described in the "Network Security -API for Sockets" (draft-metz-net-security-api-01.txt), and the -inet6-apps kit. This currently means that you need to have a BSD/OS or -NetBSD system with the NRL IPv6+IPsec software distribution. A Linux -IPsec implementation supporting this API will probably appear in the +<hr /> +<h2><a id="S13" name="S13">S13. How can I use fetchmail with Novell +GroupWise?</a></h2> + +<p>The Novell GroupWise IMAP server would be better named +GroupFoolish; it is (according to the designer of IMAP) unusably +broken. Among other things, it doesn't include a required content +length in its BODY[TEXT] response.</p> + +<p>Fetchmail works around this problem, but we strongly recommend +voting with your dollars for a server that isn't brain-dead. If you +stick with code as shoddy as GroupWise seems to be, you will +probably pay for it with other problems.</p> + +<hr /> +<h2><a id="S14" name="S14">S14. How can I use fetchmail with +InterChange?</a></h2> + +<p>You can't. At least not if you want to be able to see +attachments. InterChange has a bug similar to the MailMax server; +it reports the message length with attachments but doesn't download +them on TOP or RETR.</p> + +<p>On Jan 9 2001, the people at InfiniteMail sent me mail informing +me that their new 3.61.08 release of InterChange fixes this +problem. I don't have any reports one way or the other yet.</p> + +<h2><a id="S15" name="S15">S15. How can I use fetchmail with +GMX?</a></h2> + +<p>Use IMAP. The GMX StreamProxy server behaves badly on +authentication failures, sending back a non-conformant error +message (missing an <code>-ERR</code> tag) that confuses +fetchmail.</p> + +<hr /> +<h2><a id="K1" name="K1">K1. How can I use fetchmail with +SOCKS?</a></h2> + +<p>Giuseppe Guerini added a --with-socks option that supports +linking with socks library. If you specify the value of this option +as ``yes'', the configure script will try to find the Rconnect +library and set the makefile up to link it. You can also specify a +directory containing the Rconnect library.</p> + +<p>Alan Schmitt has added a similar --with-socks5 option that may +work better if you have a recent version of the SOCKS library.</p> + +<hr /> +<h2><a id="K2" name="K2">K2. How can I use fetchmail with IPv6 and +IPsec?</a></h2> + +<p>To use fetchmail with IPv6, you need a system that supports +IPv6, the "Basic Socket Interface Extensions for IPv6" (RFC 2133). +This currently means that you need to have a BSD/OS or NetBSD +system with the NRL IPv6+IPsec software distribution or a Linux +system with a 2.2 or later kernel and net-tools. It should not be +hard to build fetchmail on other IPv6 implementations if you can +port the inet6-apps kit.</p> + +<p>To use fetchmail with networking security (read: IPsec), you +need a system that supports IPsec, the API described in the +"Network Security API for Sockets" +(draft-metz-net-security-api-01.txt), and the inet6-apps kit. This +currently means that you need to have a BSD/OS or NetBSD system +with the NRL IPv6+IPsec software distribution. A Linux IPsec +implementation supporting this API will probably appear in the coming months.</p> -<p>The NRL IPv6+IPsec software distribution can be obtained from: <a -href="http://web.mit.edu/network/isakmp">http://web.mit.edu/network/isakmp</a> -</p> +<p>The NRL IPv6+IPsec software distribution can be obtained from: +<a +href="http://web.mit.edu/network/isakmp">http://web.mit.edu/network/isakmp</a></p> -<p>The inet6-apps kit can be obtained from <a href="http://ftp.ps.pl/pub/linux/IPv6/inet6-apps/">http://ftp.ps.pl/pub/linux/IPv6/inet6-apps/</a>.</p> +<p>The inet6-apps kit can be obtained from <a +href="http://ftp.ps.pl/pub/linux/IPv6/inet6-apps/">http://ftp.ps.pl/pub/linux/IPv6/inet6-apps/</a>.</p> -<p>More information on using IPv6 with Linux can be obtained from:</p> -<UL> -<LI> -<a href="http://www.bieringer.de/linux/IPv6/IPv6-HOWTO/IPv6-HOWTO.html"> -http://www.bieringer.de/linux/IPv6/IPv6-HOWTO/IPv6-HOWTO.html</a> -<LI> -<a href="http://www.ipv6.inner.net/ipv6">http://www.ipv6.inner.net/ipv6</a> -(via IPv6) -<LI> -<a href="http://www.inner.net/ipv6">http://www.inner.net/ipv6</a> (via IPv4) -</UL> +<p>More information on using IPv6 with Linux can be obtained +from:</p> -<hr> -<h2><a name="K3">K3. How can I get fetchmail to work with ssh?</a></h2> +<ul> +<li><a +href="http://www.bieringer.de/linux/IPv6/IPv6-HOWTO/IPv6-HOWTO.html"> +http://www.bieringer.de/linux/IPv6/IPv6-HOWTO/IPv6-HOWTO.html</a></li> -<p>Use the <tt>plugin</tt> option. This is dead simple with IMAP:</p> +<li><a +href="http://www.ipv6.inner.net/ipv6">http://www.ipv6.inner.net/ipv6</a> +(via IPv6)</li> + +<li><a +href="http://www.inner.net/ipv6">http://www.inner.net/ipv6</a> (via +IPv4)</li> +</ul> + +<hr /> +<h2><a id="K3" name="K3">K3. How can I get fetchmail to work with +ssh?</a></h2> + +<p>Use the <tt>plugin</tt> option. This is dead simple with +IMAP:</p> <pre> - plugin "ssh %h /usr/sbin/imapd" + plugin "ssh %h /usr/sbin/imapd" </pre> <p>You may have to use a different absolute pathname, whatever the -location of imapd on your mailserver is. This option tells fetchmail -that instead of opening a connection on the server's port 143 and -doing standard IMAP authentication, fetchmail should ssh to the server -and run imapd, using the more secure ssh authentication (as well as -getting ssh's end-to-end encryption). Most IMAP daemons will detect -that they've been called from the command line and assume the -connection is preauthenticated.</p> - -<p>POP3 daemons aren't quite as smart. They won't know they are -preauthenticated in this mode, so you'll actually have to ship your -password. It will be under ssh encryption, though, so that shouldn't -be a problem.</p> - -<hr> -<h2><a name="K4">K4. What do I have to do to use the IMAP-GSS protocol?</a></h2> - -<p>Fetchmail can use RFC1731 GSSAPI authorization to safely identify you -to your IMAP server, as long as you can share Kerberos V credentials -with your mail host and you have a GSSAPI-capable IMAP server. -UW-IMAP (available via FTP at <a +location of imapd on your mailserver is. This option tells +fetchmail that instead of opening a connection on the server's port +143 and doing standard IMAP authentication, fetchmail should ssh to +the server and run imapd, using the more secure ssh authentication +(as well as getting ssh's end-to-end encryption). Most IMAP daemons +will detect that they've been called from the command line and +assume the connection is preauthenticated.</p> + +<p>POP3 daemons aren't quite as smart. They won't know they are +preauthenticated in this mode, so you'll actually have to ship your +password. It will be under ssh encryption, though, so that +shouldn't be a problem.</p> + +<hr /> +<h2><a id="K4" name="K4">K4. What do I have to do to use the +IMAP-GSS protocol?</a></h2> + +<p>Fetchmail can use RFC1731 GSSAPI authorization to safely +identify you to your IMAP server, as long as you can share Kerberos +V credentials with your mail host and you have a GSSAPI-capable +IMAP server. UW-IMAP (available via FTP at <a href="ftp://ftp.cac.washington.edu/mail/">ftp.cac.washington.edu</a>) -is the only one I'm aware of and the one I recommend anyway for other -reasons. You'll need version 4.1-FINAL or greater though, and it has -to have GSS support compiled in.</p> +is the only one I'm aware of and the one I recommend anyway for +other reasons. You'll need version 4.1-FINAL or greater though, and +it has to have GSS support compiled in.</p> -<p>Neither UW-IMAP nor fetchmail compile in support for GSS by default, -since it requires libraries from the Kerberos V distribution -(available via FTP at <a +<p>Neither UW-IMAP nor fetchmail compile in support for GSS by +default, since it requires libraries from the Kerberos V +distribution (available via FTP at <a href="ftp://athena-dist.mit.edu/pub/ATHENA/kerberos">athena-dist.mit.edu</a>). If you have these, compiling in GSS support is simple: add a -<pre>--with-gssapi=[/path/to/krb5/root]</pre> option to configure. For -instance, I have all of my Kerberos V libraries installed under -/usr/krb5 so I run <pre>configure --with-gssapi=/usr/krb5</pre></p> - -<p>Setting up Kerberos V authentication is beyond the scope of this FAQ -(you may find Jim Rome's paper <a -href="http://www.ornl.gov/~jar/HowToKerb.html"> How to Kerberize your -site</a> helpful), but you'll at least need to add a credential for -imap/[mailhost] to the keytab of the mail server (IMAP doesn't just -use the host key). Then you'll need to have your credentials ready on -your machine (cf. kinit).</p> - -<p>After that things are very simple. Set your protocol to imap-gss in your -.fetchmailrc, and omit the password, since imap-gss doesn't need one. You -can specify a username if you want, but this is only useful if your mailbox -belongs to a username different from your Kerberos principal. </p> - -<p>Now you don't have to worry about your password appearing in cleartext in -your .fetchmailrc, or across the network.</p> - -<hr> -<h2><a name="K5">K5. How can I use fetchmail with SSL?</a></h2> - -<p>You'll need to have the <a href="http://www.openssl.org/">OpenSSL</a> -libraries installed. Configure with --with-ssl. If you have the -OpenSSL libraries installed in the default location (/usr/local/ssl) -ths will suffice. If you have them installed in a non-default -location, you'll need to specify it as an argument to --with-ssl after -an equal sign.</p> +<code>--with-gssapi=[/path/to/krb5/root]</code> option to +configure. For instance, I have all of my Kerberos V libraries +installed under /usr/krb5 so I run <code>configure +--with-gssapi=/usr/krb5</code></p> + +<p>Setting up Kerberos V authentication is beyond the scope of this +FAQ (you may find Jim Rome's paper <a +href="http://www.ornl.gov/~jar/HowToKerb.html">How to Kerberize +your site</a> helpful), but you'll at least need to add a +credential for imap/[mailhost] to the keytab of the mail server +(IMAP doesn't just use the host key). Then you'll need to have your +credentials ready on your machine (cf. kinit).</p> + +<p>After that things are very simple. Set your protocol to imap-gss +in your .fetchmailrc, and omit the password, since imap-gss doesn't +need one. You can specify a username if you want, but this is only +useful if your mailbox belongs to a username different from your +Kerberos principal.</p> + +<p>Now you don't have to worry about your password appearing in +cleartext in your .fetchmailrc, or across the network.</p> + +<hr /> +<h2><a id="K5" name="K5">K5. How can I use fetchmail with +SSL?</a></h2> + +<p>You'll need to have the <a +href="http://www.openssl.org/">OpenSSL</a> libraries installed. +Configure with --with-ssl. If you have the OpenSSL libraries +installed in the default location (/usr/local/ssl) ths will +suffice. If you have them installed in a non-default location, +you'll need to specify it as an argument to --with-ssl after an +equal sign.</p> <p>Note that there is a known bug in the implementation of SSL_peek under OpenSSL versions 0.9.5 and older that fetchmail occasionally -tripped over, causing hangs. It is recommended that you install 0.9.6 -or later.</p> +tripped over, causing hangs. It is recommended that you install +0.9.6 or later.</p> <p>Fetchmail binaries built this way support <code>ssl</code>, <code>sslkey</code>, and <code>sslcert</code> options that control -SSL encryption. You will need to have an SSL-enabled mailserver -to use these options. See the manual page for details and some words +SSL encryption. You will need to have an SSL-enabled mailserver to +use these options. See the manual page for details and some words of care on the limited security provided.</p> -<p>If your open OpenSSL session dies with a message that complains "PRNG -not seeded", update or improve your operating system. This means that -the OpenSSL library on your machine has been unable to locate a source -of random bits from which to seed its random-number generator; -normally these come from the <tt>/dev/urandom</tt>, and this message -probably means your OS doesn't have that device. </p> +<p>If your open OpenSSL session dies with a message that complains +"PRNG not seeded", update or improve your operating system. This +means that the OpenSSL library on your machine has been unable to +locate a source of random bits from which to seed its random-number +generator; normally these come from the <tt>/dev/urandom</tt>, and +this message probably means your OS doesn't have that device.</p> -<p>An interactive program could seed the random number generator from -keystroke timings or some other form of user input. Because fetchmail -is primarily designed to run forever as a background daemon, that -option is not available in this case.</p> +<p>An interactive program could seed the random number generator +from keystroke timings or some other form of user input. Because +fetchmail is primarily designed to run forever as a background +daemon, that option is not available in this case.</p> -<p>If you don't have the libraries installed, but do have the OpenSSL -utility toolkit, something like this may work:</p> +<p>If you don't have the libraries installed, but do have the +OpenSSL utility toolkit, something like this may work:</p> <pre> poll MYSERVER port 993 plugin "openssl s_client -connect %h:%p" protocol imap username MYUSERNAME password MYPASSWORD </pre> -<hr> -<h2><a name="R1">R1. Fetchmail isn't working, and -v shows `SMTP connect failed' messages.</a></h2> +<hr /> +<h2><a id="R1" name="R1">R1. Fetchmail isn't working, and -v shows +`SMTP connect failed' messages.</a></h2> -<p>Fetchmail itself is probably working, but your SMTP port 25 listener -is down or inaccessible.</p> +<p>Fetchmail itself is probably working, but your SMTP port 25 +listener is down or inaccessible.</p> -<p>The first thing to check is if you can telnet to port 25 on your smtp -host (which is normally `localhost' unless you've specified an smtp -option in your .fetchmailrc or on the command line) and get a greeting -line from the listener. If the SMTP host is inaccessible or the listener -is down, fix that first.</p> +<p>The first thing to check is if you can telnet to port 25 on your +smtp host (which is normally `localhost' unless you've specified an +smtp option in your .fetchmailrc or on the command line) and get a +greeting line from the listener. If the SMTP host is inaccessible +or the listener is down, fix that first.</p> -<p>In Red Hat Linux 6.9, SMTP is disabled by default. To fix this, +<p>In Red Hat Linux 6.9, SMTP is disabled by default. To fix this, set "DAEMON=yes" in your /etc/sysconfig/sendmail file, then restart sendmail by running "/sbin/service sendmail restart".</p> -<p>If the listener seems to be up when you test with telnet, the most -benign and typical problem is that the listener had a momentary seizure -due to resource exhaustion while fetchmail was polling it -- process -table full or some other problem that stopped the listener process -from forking. If your SMTP host is not `localhost' or something else -in /etc/hosts, the fetchmail glitch could also have been caused by -transient nameserver failure. </p> - -<p>Try running fetchmail -v again; if it succeeds, you had one of these -kinds of transient glitch. You can ignore these hiccups, because a -future fetchmail run will get the mail through. </p> - -<p>If the listener tests up, but you have chronic failures trying to -connect to it anyway, your problem is more serious. One way to work -around chronic SMTP connect problems is to use --mda. But this only -attacks the symptom; you may have a DNS or TCP routing problem. You -should really try to figure out what's going on underneath before it -bites you some other way. </p> - -<p>We have one report (from toby@eskimo.com) that you can sometimes solve -such problems by doing an <CODE>smtp</CODE> declaration with an IP -address that your routing table maps to something other than the -loopback device (he used ppp0).</p> +<p>If the listener seems to be up when you test with telnet, the +most benign and typical problem is that the listener had a +momentary seizure due to resource exhaustion while fetchmail was +polling it -- process table full or some other problem that stopped +the listener process from forking. If your SMTP host is not +`localhost' or something else in /etc/hosts, the fetchmail glitch +could also have been caused by transient nameserver failure.</p> + +<p>Try running fetchmail -v again; if it succeeds, you had one of +these kinds of transient glitch. You can ignore these hiccups, +because a future fetchmail run will get the mail through.</p> + +<p>If the listener tests up, but you have chronic failures trying +to connect to it anyway, your problem is more serious. One way to +work around chronic SMTP connect problems is to use --mda. But this +only attacks the symptom; you may have a DNS or TCP routing +problem. You should really try to figure out what's going on +underneath before it bites you some other way.</p> + +<p>We have one report (from toby@eskimo.com) that you can sometimes +solve such problems by doing an <code>smtp</code> declaration with +an IP address that your routing table maps to something other than +the loopback device (he used ppp0).</p> <p>We also have a report that this error can be caused by having an -/etc/hosts file that associates your client host name with more than -one IP address.</p> +/etc/hosts file that associates your client host name with more +than one IP address.</p> -<p>It's also possible that your DNS configuration isn't -looking at <code>/etc/hosts</code> at all. If you're using libc5, -look at <code>/etc/resolv.conf</code>; it should say something like:</p> +<p>It's also possible that your DNS configuration isn't looking at +<code>/etc/hosts</code> at all. If you're using libc5, look at +<code>/etc/resolv.conf</code>; it should say something like:</p> <pre> order hosts,bind </pre> -<p>so your <code>/etc/hosts</code> file is checked first. If you're -running GNU libc6, check your <code>/etc/nsswitch.conf</code> file. Make -sure it says something like</p> +<p>so your <code>/etc/hosts</code> file is checked first. If you're +running GNU libc6, check your <code>/etc/nsswitch.conf</code> file. +Make sure it says something like</p> <pre> hosts: files dns </pre> -<p>again, in order to make sure <code>/etc/hosts</code> is seen first.</p> +<p>again, in order to make sure <code>/etc/hosts</code> is seen +first.</p> -<p>If you have a hostname set for your machine, and this hostname does -not appear in /etc/hosts, you will be able to telnet to port 25 and -even send a mail with rcpt to: user@host-not-in-/etc/hosts, but -fetchmail can't seem to get in touch with sendmail, no matter what you -set smtpaddress to.</p> +<p>If you have a hostname set for your machine, and this hostname +does not appear in /etc/hosts, you will be able to telnet to port +25 and even send a mail with rcpt to: user@host-not-in-/etc/hosts, +but fetchmail can't seem to get in touch with sendmail, no matter +what you set smtpaddress to.</p> -<p>We had another report from a Linux user of fetchmail 2.1 who solved his SMTP -connection problem by removing the reference to -lresolv from his link -line and relinking. Apparently in some older Linux distributions the -libc bind library version works better.</p> +<p>We had another report from a Linux user of fetchmail 2.1 who +solved his SMTP connection problem by removing the reference to +-lresolv from his link line and relinking. Apparently in some older +Linux distributions the libc bind library version works better.</p> -<p>As of 2.2, the configure script has been hacked so the bind library is -linked only if it is actually needed. So under Linux it won't be, and -this particular cause should go away.</p> +<p>As of 2.2, the configure script has been hacked so the bind +library is linked only if it is actually needed. So under Linux it +won't be, and this particular cause should go away.</p> -<hr> -<h2><a name="R2">R2. When I try to configure an MDA, fetchmail doesn't work.</a></h2> +<hr /> +<h2><a id="R2" name="R2">R2. When I try to configure an MDA, +fetchmail doesn't work.</a></h2> <p>(I hear this one from people who have run into the blank-line problem in <a href="#X1">X1</a>.)</p> <p>Try sending yourself test mail and retrieving it using the -command-line options `<CODE>-k -m cat</CODE>'. This will dump exactly what -fetchmail retrieves to standard output (plus the Received line -fetchmail itself adds to the headers). </p> +command-line options `<code>-k -m cat</code>'. This will dump +exactly what fetchmail retrieves to standard output (plus the +Received line fetchmail itself adds to the headers).</p> <p>If the dump doesn't match what shows up in your mailbox when you -configure an MDA, your MDA is mangling the message. If it doesn't +configure an MDA, your MDA is mangling the message. If it doesn't match what you sent, then fetchmail or something on the server is broken.</p> -<hr> -<h2><a name="R3">R3. Fetchmail dumps core when given an invalid rc file.</a></h2> +<hr /> +<h2><a id="R3" name="R3">R3. Fetchmail dumps core when given an +invalid rc file.</a></h2> -<p>This is usually reported from AIX or Ultrix, but has even been known -to happen on Linuxes without a recent version of <code>flex</code> -installed. The problem appears to be a result of building with an -archaic version of lex.</p> +<p>This is usually reported from AIX or Ultrix, but has even been +known to happen on Linuxes without a recent version of +<code>flex</code> installed. The problem appears to be a result of +building with an archaic version of lex.</p> <p>Workaround: fix the syntax of your .fetchmailrc file.</p> <p>Fix: build and install the latest version of <a href="ftp://prep.ai.mit.edu/~ftp/pub/gnu">flex</a> from the Free -Software Foundation. An FSF <a +Software Foundation. An FSF <a href="http://www.gnu.ai.mit.edu/order/ftp.html">mirror site</a> will help you get it faster.</p> -<hr> -<h2><a name="R4">R4. Fetchmail dumps core in -V mode, but operates normally otherwise.</a></h2> +<hr /> +<h2><a id="R4" name="R4">R4. Fetchmail dumps core in -V mode, but +operates normally otherwise.</a></h2> -<p>We've had this reported to us under Linux using libc-5.4.17 and gcc-2.7.2. -It does not occur with libc-5.3.12 or earlier versions.</p> +<p>We've had this reported to us under Linux using libc-5.4.17 and +gcc-2.7.2. It does not occur with libc-5.3.12 or earlier +versions.</p> -<p>Workaround: link with GNU malloc rather than the stock C library malloc.</p> +<p>Workaround: link with GNU malloc rather than the stock C library +malloc.</p> <p>We're told there is some problem with the malloc() code in that version which makes it fragile in the presence of multiple free() calls on the same pointer (the malloc arena gets corrupted). Unfortunately it appears from doing gdb traces that whatever free() -calls producing the problem are being made by the C library itself, not the -fetchmail code (they're all from within fclose, and not an fclose called -directly by fetchmail, either).</p> +calls producing the problem are being made by the C library itself, +not the fetchmail code (they're all from within fclose, and not an +fclose called directly by fetchmail, either).</p> -<hr> -<h2><a name="R5">R5. Running fetchmail in daemon mode doesn't work.</a><br></h2> +<hr /> +<h2><a id="R5" name="R5">R5. Running fetchmail in daemon mode +doesn't work.</a><br /> +</h2> -We have one report from a SunOS 4.1.4 user that trying to run +<p>We have one report from a SunOS 4.1.4 user that trying to run fetchmail in detached daemon mode doesn't work, but that using the -same options with -N (nodetach) is OK. We have another report of +same options with -N (nodetach) is OK. We have another report of similar behavior from one Linux user, but many other Linux users reportt no problem.</p> -<p>If this happens, you have a specific portability problem with the code -in daemon.c that detaches and backgrounds the daemon fetchmail. The isolated -Linux case has been chased down to a failure in dup(2) that may reflect a -glibc bug.</p> +<p>If this happens, you have a specific portability problem with +the code in daemon.c that detaches and backgrounds the daemon +fetchmail. The isolated Linux case has been chased down to a +failure in dup(2) that may reflect a glibc bug.</p> -<p>As a workaround, you can start fetchmail with -N and an ampersand -to background it. A Sun user recommends this:</p> +<p>As a workaround, you can start fetchmail with -N and an +ampersand to background it. A Sun user recommends this:</p> <pre> (fetchmail --nodetach <other params> &) </pre> -<p>The extra pair of parens is significant --- it makes sure that the process -detaches from the initial shell (one more shell is started and dies -immediately, detaching fetchmail and making it child of PID 1). This is -important when you start fetchmail interactively and than quit -interactive shell. The line above makes sure fetchmail lives after -that!</p> +<p>The extra pair of parens is significant --- it makes sure that +the process detaches from the initial shell (one more shell is +started and dies immediately, detaching fetchmail and making it +child of PID 1). This is important when you start fetchmail +interactively and than quit interactive shell. The line above makes +sure fetchmail lives after that!</p> -<hr> -<h2><a name="R6">R6. Fetchmail randomly dies with socket errors.</a></h2> +<hr /> +<h2><a id="R6" name="R6">R6. Fetchmail randomly dies with socket +errors.</a></h2> <p>Check the MTU value in your PPP interface reported by -<code>/sbin/ifconfig</code>. If it's over 600, change it in your PPP -options file. (<code>/etc/ppp/options</code> on my box). Here are -option values that work:</p> +<code>/sbin/ifconfig</code>. If it's over 600, change it in your +PPP options file. (<code>/etc/ppp/options</code> on my box). Here +are option values that work:</p> <pre> mtu 552 mru 552 </pre> -<p>Another circumstance that can trigger this is if you are polling a -virtual-mail-server name that is round-robin connected to different -actual servers, so you get different IP addresses on different poll -cycles. To work around this, change the poll name either to the real -name of one of the servers in the ring or to a corresponding IP -address.</p> +<p>Another circumstance that can trigger this is if you are polling +a virtual-mail-server name that is round-robin connected to +different actual servers, so you get different IP addresses on +different poll cycles. To work around this, change the poll name +either to the real name of one of the servers in the ring or to a +corresponding IP address.</p> -<hr> -<h2><a name="R7">R7. Fetchmail running as root stopped working after an OS upgrade</a></h2> +<hr /> +<h2><a id="R7" name="R7">R7. Fetchmail running as root stopped +working after an OS upgrade</a></h2> -<p>In RH 6.0, the HOME value in the boot-time root environment changed -from /root to / as the result of a change in init. Move your -.fetchmailrc or use a -f option to explicitly point at the file. -(Oddly, a similar problem has been reported from Debian systems.)</p> +<p>In RH 6.0, the HOME value in the boot-time root environment +changed from /root to / as the result of a change in init. Move +your .fetchmailrc or use a -f option to explicitly point at the +file. (Oddly, a similar problem has been reported from Debian +systems.)</p> -<hr> -<h2><a name="R8">R8. Fetchmail is timing out after fetching certain -messages but before deleting them</a></h2> +<hr /> +<h2><a id="R8" name="R8">R8. Fetchmail is timing out after fetching +certain messages but before deleting them</a></h2> -<p>There's a TCP/IP stalling problem under Redhat 6.0 (and possibly other -recent Linuxes) that can cause this symptom. Brian Boutel writes:<</p> +<p>There's a TCP/IP stalling problem under Redhat 6.0 (and possibly +other recent Linuxes) that can cause this symptom. Brian Boutel +writes:<</p></p> <blockquote> -<p>TCP timestamps are turned on on my Linux boxes (I assume it's now the -default). This uses 12 extra bytes per segment. -When the tcp connection starts, the other end agrees a MSS of 1460, -and then fragments 1460 byte chunks into 1448 and 12, because -is is not allowing for the timestamp.</p> - -<p>Then, for reasons I can't explain, it waits a long time (typically 2 -minutes) after the ack is sent before sending the next (fragmented) -packet. Turning off tcp timestamps avoids the fragmentation and -restores normal behaviour. To do this, [execute]</p> +<p>TCP timestamps are turned on on my Linux boxes (I assume it's +now the default). This uses 12 extra bytes per segment. When the +tcp connection starts, the other end agrees a MSS of 1460, and then +fragments 1460 byte chunks into 1448 and 12, because is is not +allowing for the timestamp.</p> + +<p>Then, for reasons I can't explain, it waits a long time +(typically 2 minutes) after the ack is sent before sending the next +(fragmented) packet. Turning off tcp timestamps avoids the +fragmentation and restores normal behaviour. To do this, +[execute]</p> <p>echo 0 > /proc/sys/net/ipv4/tcp_timestamps</p> -<p>I'm still unclear about the details of why this is happening. At least -[now] I am now getting good performance and no queue blocking.</p> +<p>I'm still unclear about the details of why this is happening. At +least [now] I am now getting good performance and no queue +blocking.</p> </blockquote> -<hr> -<h2><a name="R9">R9. Fetchmail is timing out during message fetches</a></h2> +<hr /> +<h2><a id="R9" name="R9">R9. Fetchmail is timing out during message +fetches</a></h2> -<p>This is probably a general networking issue. Sending a "RETR" command will -cause the server to start sending large amounts of data, which means -large packets. If your networking layer has a packet-fragmentation -problem, that's where you'll see it.</p> +<p>This is probably a general networking issue. Sending a "RETR" +command will cause the server to start sending large amounts of +data, which means large packets. If your networking layer has a +packet-fragmentation problem, that's where you'll see it.</p> -<hr> -<h2><a name="R10">R10. Fetchmail is dying with SIGPIPE.</a></h2> +<hr /> +<h2><a id="R10" name="R10">R10. Fetchmail is dying with +SIGPIPE.</a></h2> -<p>This probably means you have an <code>mda</code> option. Your MDA is -croaking while being passed a message. Best fix is to remove the -<code>mda</code> option and pass mail to your port 25 SMTP listener.</p> +<p>This probably means you have an <code>mda</code> option. Your +MDA is croaking while being passed a message. Best fix is to remove +the <code>mda</code> option and pass mail to your port 25 SMTP +listener.</p> -<p>If for some reason you are invoking sendmail via the <tt>mda</tt> -option (rather than delivering to port 25 via smtp), don't forget to -include the -i switch. Otherwise you will occasionally get mysterious delivery -failures with a SIGPIPE as the sendmail instance dies. The problem is -messages with a single dot at start of a text line.</p> +<p>If for some reason you are invoking sendmail via the +<tt>mda</tt> option (rather than delivering to port 25 via smtp), +don't forget to include the -i switch. Otherwise you will +occasionally get mysterious delivery failures with a SIGPIPE as the +sendmail instance dies. The problem is messages with a single dot +at start of a text line.</p> -<hr> -<a name="R11">R11. My server is hanging up or emitting errors on CAPA.</a></h2> +<hr /> +<h2><a id="R11" name="R11">R11. My server is hanging up or emitting +errors on CAPA.</a></h2> -<p>Your POP3 server is broken. You can work around this with the +<p>Your POP3 server is broken. You can work around this with the declaration <tt>auth password</tt> in your .fetchmailrc.</p> -<hr> -<h2><a name="H1">H1. Fetchmail hangs when used with pppd.</a></h2> +<hr /> +<h2><a id="H1" name="H1">H1. Fetchmail hangs when used with +pppd.</a></h2> -<p>Your problem may be with pppd's `demand' option. We have a report that -fetchmail doesn't play well with it, but works with pppd if `demand' -is turned off. We have no idea why this is.</p> +<p>Your problem may be with pppd's `demand' option. We have a +report that fetchmail doesn't play well with it, but works with +pppd if `demand' is turned off. We have no idea why this is.</p> -<hr> -<h2><a name="H2">H2. Fetchmail hangs during the MAIL FROM exchange.</a></h2> +<hr /> +<h2><a id="H2" name="H2">H2. Fetchmail hangs during the MAIL FROM +exchange.</a></h2> -<p>The symptom: 'fetchmail -v' retrieves mail fine, but appears to hang after -sending the MAIL FROM command</p> +<p>The symptom: 'fetchmail -v' retrieves mail fine, but appears to +hang after sending the MAIL FROM command</p> <pre> -SMTP> MAIL FROM: <someone@somewhere> +SMTP> MAIL FROM: <someone@somewhere> </pre> <p>The hang is actually occuring when sendmail looks up a sender's -address in DNS. The problem isn't in fetchmail but in the -configuration of sendmail. You must enable the 'nodns' and +address in DNS. The problem isn't in fetchmail but in the +configuration of sendmail. You must enable the 'nodns' and 'nocanonify' features of sendmail.</p> <p>Here was my fix for RedHat 7.2:</p> <ol> -<li># cd /etc/mail -<li># cp sendmail.mc sendmail-mine.mc -<li>Edit sendmail-mine.mc and add lines: +<li># cd /etc/mail</li> + +<li># cp sendmail.mc sendmail-mine.mc</li> + +<li>Edit sendmail-mine.mc and add lines: + <pre> FEATURE(nodns) FEATURE(nocanonify) </pre> -<li>Build a new sendmail.cf +</li> + +<li>Build a new sendmail.cf + <pre> - # m4 sendmail-mine.cf > /etc/sendmail.cf + # m4 sendmail-mine.cf > /etc/sendmail.cf </pre> -<li>Restart sendmail. +</li> + +<li>Restart sendmail.</li> </ol> -<p>For more details consult the file /usr/share/sendmail-cf/README.</p> +<p>For more details consult the file +/usr/share/sendmail-cf/README.</p> -<hr> -<h2><a name="H3">H3. Fetchmail hangs while fetching mail.</a></h2> +<hr /> +<h2><a id="H3" name="H3">H3. Fetchmail hangs while fetching +mail.</a></h2> -<p>The symption: 'fetchmail -v' retrieves the first few messages, but -hangs returning:</p> +<p>The symption: 'fetchmail -v' retrieves the first few messages, +but hangs returning:</p> <pre> - fetchmail: SMTP< 550 5.0.0 Access denied - fetchmail: SMTP> RSET - fetchmail: SMTP< 250 2.0.0 Reset state + fetchmail: SMTP< 550 5.0.0 Access denied + fetchmail: SMTP> RSET + fetchmail: SMTP< 250 2.0.0 Reset state .......fetchmail: flushed - fetchmail: POP3> DELE 1 - fetchmail: POP3< +OK marked deleted + fetchmail: POP3> DELE 1 + fetchmail: POP3< +OK marked deleted </pre> -<p>Check and see if you're allowing sendmail connections through TCP -wrappers.</p> +<p>Check and see if you're allowing sendmail connections through +TCP wrappers.</p> -<p>Adding 'sendmail : 127.0.0.1' to /etc/hosts.allow could solve this -problem.</p> +<p>Adding 'sendmail : 127.0.0.1' to /etc/hosts.allow could solve +this problem.</p> -<hr> -<h2><a name="D1">D1. I think I've set up fetchmail correctly, but I'm not getting any mail.</a></h2> +<hr /> +<h2><a id="D1" name="D1">D1. I think I've set up fetchmail +correctly, but I'm not getting any mail.</a></h2> -<p>Maybe you have a .forward or alias set up that you've forgotten about. You -should probably remove it.</p> +<p>Maybe you have a .forward or alias set up that you've forgotten +about. You should probably remove it.</p> -<p>Or maybe you're trying to run fetchmail in multidrop mode as root -without a .fetchmailrc file. This doesn't do what you think it +<p>Or maybe you're trying to run fetchmail in multidrop mode as +root without a .fetchmailrc file. This doesn't do what you think it should; see question <a href="#C1">C1</a>.</p> -<p>Or you may not be connecting to the SMTP listener. Run fetchmail -v -and see <a href="#R1">R1</a>.</p> +<p>Or you may not be connecting to the SMTP listener. Run fetchmail +-v and see <a href="#R1">R1</a>.</p> -<p>Or you may have your local user set incorrectly. In the following -line</p> +<p>Or you may have your local user set incorrectly. In the +following line</p> <pre> user 'remoteuser' there with password '*' is 'localuser' here @@ -2253,176 +2564,195 @@ line</p> <p>make sure that 'localuser' does exist and can receive mail.</p> - -<hr> -<h2><a name="D2">D2. All my mail seems to disappear after a dropped connection.</a></h2> - -<p>One POP3 daemon used in the Berkeley Unix world that reports itself as -POP3 version 1.004 actually throws the queue away. 1.005 fixed that. -If you're running this one, upgrade immediately. (It also truncates -long lines at column 1024)</p> - -<p>Many POP servers, if an interruption occurs, will restore the whole -mail queue after about 10 minutes. Others will restore it right -away. If you have an interruption and don't see it right away, cross -your fingers and wait ten minutes before retrying.</p> - -<p>Some servers (such as Microsoft's NTMail) are mis-designed to restore -the entire queue, including messages you have deleted. If you have -one of these and it flakes out on you a lot, try setting a small -<code>--fetchlimit</code> value. This will result in more IP connects -to the server, but will mean it actually executes changes to the queue -more often.</p> - -<p>Qualcomm's qpopper, used at many BSD Unix sites, is better behaved. -If its connection is dropped, it will first execute all DELE commands as -though you had issued a QUIT (this is a technical violation of -the POP3 RFCs, but a good idea in a world of flaky phone lines). Then it -will re-queue any message that was being downloaded at hangup time. -Still, qpopper may require a noticeable amount of time to do deletions -and clean up its queue. (Fetchmail waits a bit before retrying in -order to avoid a `lock busy' error.)</p> - -<hr> -<h2><a name="D3">D3. Mail that was being fetched when I interrupted my fetchmail seems to have been vanished.</a></h2> - -<p>Fetchmail only sends a delete mail request to the server when either -(a) it gets a positive delivery acknowledgment from the SMTP +<hr /> +<h2><a id="D2" name="D2">D2. All my mail seems to disappear after a +dropped connection.</a></h2> + +<p>One POP3 daemon used in the Berkeley Unix world that reports +itself as POP3 version 1.004 actually throws the queue away. 1.005 +fixed that. If you're running this one, upgrade immediately. (It +also truncates long lines at column 1024)</p> + +<p>Many POP servers, if an interruption occurs, will restore the +whole mail queue after about 10 minutes. Others will restore it +right away. If you have an interruption and don't see it right +away, cross your fingers and wait ten minutes before retrying.</p> + +<p>Some servers (such as Microsoft's NTMail) are mis-designed to +restore the entire queue, including messages you have deleted. If +you have one of these and it flakes out on you a lot, try setting a +small <code>--fetchlimit</code> value. This will result in more IP +connects to the server, but will mean it actually executes changes +to the queue more often.</p> + +<p>Qualcomm's qpopper, used at many BSD Unix sites, is better +behaved. If its connection is dropped, it will first execute all +DELE commands as though you had issued a QUIT (this is a technical +violation of the POP3 RFCs, but a good idea in a world of flaky +phone lines). Then it will re-queue any message that was being +downloaded at hangup time. Still, qpopper may require a noticeable +amount of time to do deletions and clean up its queue. (Fetchmail +waits a bit before retrying in order to avoid a `lock busy' +error.)</p> + +<hr /> +<h2><a id="D3" name="D3">D3. Mail that was being fetched when I +interrupted my fetchmail seems to have been vanished.</a></h2> + +<p>Fetchmail only sends a delete mail request to the server when +either (a) it gets a positive delivery acknowledgment from the SMTP listener, or (b) it gets one of the spam-filter errors (see the -description of the <code>antispam></code> option) from the -listener. No interrupt can cause it to lose mail.</p> +description of the <code>antispam></code> option) from the +listener. No interrupt can cause it to lose mail.</p> <p>However, IMAP2bis has a design problem in that its normal fetch -command marks a message `seen' as soon as the fetch command to get it -is sent down. If for some reason the message isn't actually delivered -(you take a line hit during the download, or your port 25 listener -can't find enough free disk space, or you interrupt the delivery in -mid-message) that `seen' message can lurk invisibly in your server -mailbox forever.</p> +command marks a message `seen' as soon as the fetch command to get +it is sent down. If for some reason the message isn't actually +delivered (you take a line hit during the download, or your port 25 +listener can't find enough free disk space, or you interrupt the +delivery in mid-message) that `seen' message can lurk invisibly in +your server mailbox forever.</p> -<p>Workaround: add the `<CODE>fetchall</CODE>' keyword to your fetch options.</p> +<p>Workaround: add the `<code>fetchall</code>' keyword to your +fetch options.</p> -<p>Solution: switch to an <a href="http://www.imap.org">IMAP4</a> server.</p> +<p>Solution: switch to an <a href="http://www.imap.org">IMAP4</a> +server.</p> -<hr> -<h2><a name="M1">M1. I've declared local names, but all my multidrop -mail is going to root anyway.</a></h2> +<hr /> +<h2><a id="M1" name="M1">M1. I've declared local names, but all my +multidrop mail is going to root anyway.</a></h2> <p>Somehow your fetchmail is never recognizing the hostname part of recipient names it parses out of To/Cc/envelope-header lines as matching the name of the mailserver machine. To check this, run -fetchmail in foreground with -v -v on. You will probably see a lot of -messages with the format ``line rejected, %s is not an alias of the -mailserver'' or ``no address matches; forwarding to %s.'' </p> +fetchmail in foreground with -v -v on. You will probably see a lot +of messages with the format ``line rejected, %s is not an alias of +the mailserver'' or ``no address matches; forwarding to %s.''</p> -<p>These errors usually indicate some kind of DNS configuration problem -either on the server or your client machine.</p> +<p>These errors usually indicate some kind of DNS configuration +problem either on the server or your client machine.</p> -<p>The easiest workaround is to add a `<CODE>via</CODE>' option (if +<p>The easiest workaround is to add a `<code>via</code>' option (if necessary) and add enough aka declarations to cover all of your -mailserver's aliases, then say `<CODE>no dns</CODE>'. This will take -DNS out of the picture (though it means mail may be uncollected if -it's sent to an alias of the mailserver that you don't have -listed).</p> - -<p>It would be better to fix your DNS, however. DNS problems can hurt -you in lots of ways, for example by making your machines -intermittently or permanently unreachable to the rest of the net.</p> - -<p>Occasionally these errors indicate the sort of header-parsing problem -described in <a href="#M7">M7</a>.</p> - -<hr> -<h2><a name="M2">M2. I can't seem to get fetchmail to route to a local domain properly.</a></h2> - -<p>A lot of people want to use fetchmail as a poor man's internetwork -mail gateway, picking up mail accumulated for a whole domain in a single -server mailbox and then routing based on what's in the To/Cc/Bcc lines.</p> - -<p>In general, this is not really a good idea. It would be smarter to -just let the mail sit in the mailserver's queue and use fetchmail's -ETRN or ODMR modes to trigger SMTP sends periodically (of course, this means -you have to poll more frequently than the mailserver's expiration period). -If you can't arrange this, try setting up a UUCP feed.</p> - -<p>If neither of these alternatives is available, multidrop mode may do -(though you <em>are</em> going to get hurt by some mailing list -software; see the caveats under THE USE AND ABUSE OF MULTIDROP -MAILBOXES on the man page). If you want to try it, the way to do it -is with the `<CODE>localdomains</CODE>' option.</p> - -<p>In general, if you use localdomains you need to make sure of two other -things:</p> - -<p><strong>1. You've actually set up your .fetchmailrc entry to invoke multidrop mode.</strong></p> - -<p>Many people set a `<CODE>localdomains</CODE>' list and then forget -that fetchmail wants to see more than one name (or the wildcard `*') -in a `<CODE>here</CODE>' list before it will do multidrop routing.</p> +mailserver's aliases, then say `<code>no dns</code>'. This will +take DNS out of the picture (though it means mail may be +uncollected if it's sent to an alias of the mailserver that you +don't have listed).</p> + +<p>It would be better to fix your DNS, however. DNS problems can +hurt you in lots of ways, for example by making your machines +intermittently or permanently unreachable to the rest of the +net.</p> + +<p>Occasionally these errors indicate the sort of header-parsing +problem described in <a href="#M7">M7</a>.</p> + +<hr /> +<h2><a id="M2" name="M2">M2. I can't seem to get fetchmail to route +to a local domain properly.</a></h2> + +<p>A lot of people want to use fetchmail as a poor man's +internetwork mail gateway, picking up mail accumulated for a whole +domain in a single server mailbox and then routing based on what's +in the To/Cc/Bcc lines.</p> + +<p>In general, this is not really a good idea. It would be smarter +to just let the mail sit in the mailserver's queue and use +fetchmail's ETRN or ODMR modes to trigger SMTP sends periodically +(of course, this means you have to poll more frequently than the +mailserver's expiration period). If you can't arrange this, try +setting up a UUCP feed.</p> + +<p>If neither of these alternatives is available, multidrop mode +may do (though you <em>are</em> going to get hurt by some mailing +list software; see the caveats under THE USE AND ABUSE OF MULTIDROP +MAILBOXES on the man page). If you want to try it, the way to do it +is with the `<code>localdomains</code>' option.</p> + +<p>In general, if you use localdomains you need to make sure of two +other things:</p> + +<p><strong>1. You've actually set up your .fetchmailrc entry to +invoke multidrop mode.</strong></p> + +<p>Many people set a `<code>localdomains</code>' list and then +forget that fetchmail wants to see more than one name (or the +wildcard `*') in a `<code>here</code>' list before it will do +multidrop routing.</p> <p><strong>2. You may have to set `no envelope'.</strong></p> -<p>Normally, multidrop mode tries to deduce an envelope address from a message -before parsing the To/Cc/Bcc lines (this enables it to avoid losing to mailing -list software that doesn't put a recipient address in the To lines).</p> +<p>Normally, multidrop mode tries to deduce an envelope address +from a message before parsing the To/Cc/Bcc lines (this enables it +to avoid losing to mailing list software that doesn't put a +recipient address in the To lines).</p> -<p>Some ways of accumulating a whole domain's messages in a single server -mailbox mean it all ends up with a single envelope address that is -useless for rerouting purposes. You may have to set `<CODE>no -envelope</CODE>' to prevent fetchmail from being bamboozled by this.</p> +<p>Some ways of accumulating a whole domain's messages in a single +server mailbox mean it all ends up with a single envelope address +that is useless for rerouting purposes. You may have to set +`<code>no envelope</code>' to prevent fetchmail from being +bamboozled by this.</p> -<p>Check also answer <a href="#T1">T1</a> on a reliable way to do multidrop -delivery if your ISP (or your mail redirection provider) is using qmail.</p> +<p>Check also answer <a href="#T1">T1</a> on a reliable way to do +multidrop delivery if your ISP (or your mail redirection provider) +is using qmail.</p> -<hr> -<h2><a name="M3">M3. I tried to run a mailing list using multidrop, and I have a mail loop!</a></h2> +<hr /> +<h2><a id="M3" name="M3">M3. I tried to run a mailing list using +multidrop, and I have a mail loop!</a></h2> -<p>This isn't fetchmail's fault. Check your mailing list. If the list -expansion includes yourself or anybody else at your mailserver (that is, not on -the client side) you've created a mail loop. Just chop the host part off any -local addresses in the list.</p> +<p>This isn't fetchmail's fault. Check your mailing list. If the +list expansion includes yourself or anybody else at your mailserver +(that is, not on the client side) you've created a mail loop. Just +chop the host part off any local addresses in the list.</p> <p>If you use sendmail, you can check the list expansion with -<CODE>sendmail -bv</CODE>.</p> +<code>sendmail -bv</code>.</p> -<hr> -<h2><a name="M4">M4. My multidrop fetchmail seems to be having DNS problems.</a></h2> +<hr /> +<h2><a id="M4" name="M4">M4. My multidrop fetchmail seems to be +having DNS problems.</a></h2> <p>We have one report from a Linux user (not the same one as in <a -href="#R1">R1</a>!) who solved this problem by removing the reference -to -lresolv from his link line and relinking. Apparently in some -older Linux distributions the libc5 bind library version works -better.</p> - -<p>As of 2.2, the configure script has been hacked so the bind library -is linked only if it is actually needed. So under Linux it won't be, -and this problem should go away.</p> - -<hr> -<h2><a name="M5">M5. I'm seeing long DNS delays before each message is processed.</a></h2> - -<p>Use the `<CODE>aka</CODE>' option to pre-declare as many of your -mailserver's DNS names as you can. When an address's host part -matches an aka name, no DNS lookup needs to be done to check it.</p> +href="#R1">R1</a>!) who solved this problem by removing the +reference to -lresolv from his link line and relinking. Apparently +in some older Linux distributions the libc5 bind library version +works better.</p> + +<p>As of 2.2, the configure script has been hacked so the bind +library is linked only if it is actually needed. So under Linux it +won't be, and this problem should go away.</p> + +<hr /> +<h2><a id="M5" name="M5">M5. I'm seeing long DNS delays before each +message is processed.</a></h2> + +<p>Use the `<code>aka</code>' option to pre-declare as many of your +mailserver's DNS names as you can. When an address's host part +matches an aka name, no DNS lookup needs to be done to check +it.</p> -<p>If you're sure you've pre-declared all of your mailserver's DNS names, -you can use the `<CODE>no dns</CODE>' option to prevent other hostname -parts from being looked up at all.</p> +<p>If you're sure you've pre-declared all of your mailserver's DNS +names, you can use the `<code>no dns</code>' option to prevent +other hostname parts from being looked up at all.</p> -<p>Sometimes delays are unavoidable. Some SMTP listeners try to call DNS -on the From-address hostname as a way of checking that the address is valid.</p> +<p>Sometimes delays are unavoidable. Some SMTP listeners try to +call DNS on the From-address hostname as a way of checking that the +address is valid.</p> -<hr> -<h2><a name="M6">M6. How do I get multidrop mode to work with majordomo?</a></h2> +<hr /> +<h2><a id="M6" name="M6">M6. How do I get multidrop mode to work +with majordomo?</a></h2> -<p>In order for sendmail to execute the command strings in the majordomo -alias file, it is necessary for sendmail to think that the mail it -receives via SMTP really is destined for a local user name. A normal -virtual-domain setup results in delivery to the default mailbox, -rather than expansion through majordomo.</p> +<p>In order for sendmail to execute the command strings in the +majordomo alias file, it is necessary for sendmail to think that +the mail it receives via SMTP really is destined for a local user +name. A normal virtual-domain setup results in delivery to the +default mailbox, rather than expansion through majordomo.</p> -<p>Michael <michael@bizsystems.com> gave us a recipe for dealing -with this case that pairs a run control file like this: +<p>Michael <michael@bizsystems.com> gave us a recipe for +dealing with this case that pairs a run control file like this:</p> <pre> poll your.pop3.server proto pop3: @@ -2454,23 +2784,22 @@ R< error : $- $+ > $* $#error $@ $1 $: $2 R< $+ > $+ < @ $+ > $: $>97 $1 </pre> -<p>This ruleset just strips virtual domain names off the addresses of incoming -mail. Your sendmail must be 8.8 or newer for this to work. Michael -says:</p> +<p>This ruleset just strips virtual domain names off the addresses +of incoming mail. Your sendmail must be 8.8 or newer for this to +work. Michael says:</p> -<BLOCKQUOTE> -I use this scheme with 2 virtual domains and the default ISP -user+domain and service about 30 mail accounts + majordomo on my -inside pop3 server with fetchmail and sendmail 8.83 -</BLOCKQUOTE> +<blockquote>I use this scheme with 2 virtual domains and the +default ISP user+domain and service about 30 mail accounts + +majordomo on my inside pop3 server with fetchmail and sendmail +8.83</blockquote> -<hr> -<h2><a name="M7">M7. Multidrop mode isn't parsing envelope addresses from -my Received headers as it should.</a></h2> +<hr /> +<h2><a id="M7" name="M7">M7. Multidrop mode isn't parsing envelope +addresses from my Received headers as it should.</a></h2> <p>It may happen that you're getting what appear to be well-formed sendmail Received headers, but fetchmail can't seem to extract an -envelope address from them. There can be a couple of reasons for +envelope address from them. There can be a couple of reasons for this.</p> <h3>Spurious Received lines need to be skipped:</h3> @@ -2480,11 +2809,11 @@ Normally it looks only on the first one it sees, on the theory that that one was last added and is going to be the one containing your mailserver's theory of who the message was addressed to.</p> -<p>Some (unusual) mailserver configurations will generate extra Received -lines which you need to skip. To arrange this, use the optional -skip prefix argument of the `envelope' option; you may need to say -something like `<code>envelope 1 Received</code>' or `<code>envelope 2 -Received</code>'.</p> +<p>Some (unusual) mailserver configurations will generate extra +Received lines which you need to skip. To arrange this, use the +optional skip prefix argument of the `envelope' option; you may +need to say something like `<code>envelope 1 Received</code>' or +`<code>envelope 2 Received</code>'.</p> <h3>The `by' clause doesn't contain a mailserver alias:</h3> @@ -2496,258 +2825,282 @@ Received: from send103.yahoomail.com (send103.yahoomail.com [205.180.60.92]) for <ksturgeon@fbceg.org>; Wed, 9 Sep 1998 17:01:59 -0700 </pre> -<p>it checks to see if `iserv.ttns.net' is a DNS alias of your mailserver -before accepting `ksturgeon@fbceg.org' as an envelope address. This -check might fail if your DNS were misconfigured, or if you were using `no dns' -and had failed to declare iserv.ttns.net as an alias of your server.</p> +<p>it checks to see if `iserv.ttns.net' is a DNS alias of your +mailserver before accepting `ksturgeon@fbceg.org' as an envelope +address. This check might fail if your DNS were misconfigured, or +if you were using `no dns' and had failed to declare iserv.ttns.net +as an alias of your server.</p> -<hr> -<h2><a name="M8">M8. Users are getting multiple copies of messages.</a></h2> +<hr /> +<h2><a id="M8" name="M8">M8. Users are getting multiple copies of +messages.</a></h2> -<p>It's a consequence of multidrop. What's happening is that you have -N users subscribed to the same list. The list software sends N -copies, not knowing they will end up in the same multidrop box. Since -they are both locally addressed to all N users, fetchmail delivers N -copies to each user.</p> +<p>It's a consequence of multidrop. What's happening is that you +have N users subscribed to the same list. The list software sends N +copies, not knowing they will end up in the same multidrop box. +Since they are both locally addressed to all N users, fetchmail +delivers N copies to each user.</p> <p>Fetchmail tries to eliminate adjacent duplicate messages in a -multidrop mailbox. However, this logic depends on the message-ID -being identical in both copies. It also depends on the two copies -being adjacent in the server mailbox. The former is usually the case, -but the latter condition sometimes fails in a timing-dependent way if -the server was processing multiple incoming mail streams.</p> - -<p>I could eliminate this problem by keeping a list of all message-IDs -received during a poll so far and dropping any message that matches a -seen mail ID. The trouble is that this is an O(N**2) operation that -might significantly slow down the retrieval of large mail batches.</p> - -<hr> -<h2><a name="X1">X1. Spurious blank lines are appearing in the headers of fetched mail.</a></h2> +multidrop mailbox. However, this logic depends on the message-ID +being identical in both copies. It also depends on the two copies +being adjacent in the server mailbox. The former is usually the +case, but the latter condition sometimes fails in a +timing-dependent way if the server was processing multiple incoming +mail streams.</p> + +<p>I could eliminate this problem by keeping a list of all +message-IDs received during a poll so far and dropping any message +that matches a seen mail ID. The trouble is that this is an O(N**2) +operation that might significantly slow down the retrieval of large +mail batches.</p> + +<hr /> +<h2><a id="X1" name="X1">X1. Spurious blank lines are appearing in +the headers of fetched mail.</a></h2> <p>What's probably happening is that the POP/IMAP daemon on your mailserver is inserting a non-RFC822 header (like X-POP3-Rcpt:) and something in your delivery path (most likely an old version of the -<em>deliver</em> program, which sendmail often calls to do local delivery) is -failing to recognize it as a header.</p> +<em>deliver</em> program, which sendmail often calls to do local +delivery) is failing to recognize it as a header.</p> -<p>This is not fetchmail's problem. The first thing to try is installing -a current version of <em>deliver</em>. If this doesn't work, try to -figure out which other program in your mail path is inserting the -blank line and replace that. If you can't do either of these things, -pick a different MDA (such as procmail) and declare it with the -`<CODE>mda</CODE>' option.</p> +<p>This is not fetchmail's problem. The first thing to try is +installing a current version of <em>deliver</em>. If this doesn't +work, try to figure out which other program in your mail path is +inserting the blank line and replace that. If you can't do either +of these things, pick a different MDA (such as procmail) and +declare it with the `<code>mda</code>' option.</p> -<hr> -<h2><a name="X2">X2. My mail client can't see a Subject line.</a></h2> +<hr /> +<h2><a id="X2" name="X2">X2. My mail client can't see a Subject +line.</a></h2> -<p>First, see <a href="#X1">X1</a>. This is quite probably the same +<p>First, see <a href="#X1">X1</a>. This is quite probably the same problem (X-POP3-Rcpt header or something similar being inserted by -the server and choked on by an old version of <em>deliver</em>).</p> - -<p>The O'Reilly sendmail book does warn that IDA sendmail doesn't process -X- headers correctly. If this is your problem, all I can suggest is -replacing IDA sendmail, because it's broken and not RFC822 conformant.</p> - -<hr> -<h2><a name="X3">X3. Messages containing "From" at start of line are being split.</a></h2> - -<p>If you know the messages aren't split in your server mailbox, then this -is a problem with your POP/IMAP server, your client-side SMTP listener or -your local delivery agent. Fetchmail cannot split messages.</p> - -<p>Some POP server daemons ignore Content-Length headers and split messages on -From lines. We have one report that the 2.1 version of the BSD popper -program (as distributed on Solaris 2.5 and elsewhere) is broken this way.</p> - -<p>You can test this. Declare an mda of `cat' and send yourself one -piece of mail containing "From" at start of a line. If you see a -split message, your POP/IMAP server is at fault. Upgrade to a more +the server and choked on by an old version of +<em>deliver</em>).</p> + +<p>The O'Reilly sendmail book does warn that IDA sendmail doesn't +process X- headers correctly. If this is your problem, all I can +suggest is replacing IDA sendmail, because it's broken and not +RFC822 conformant.</p> + +<hr /> +<h2><a id="X3" name="X3">X3. Messages containing "From" at start of +line are being split.</a></h2> + +<p>If you know the messages aren't split in your server mailbox, +then this is a problem with your POP/IMAP server, your client-side +SMTP listener or your local delivery agent. Fetchmail cannot split +messages.</p> + +<p>Some POP server daemons ignore Content-Length headers and split +messages on From lines. We have one report that the 2.1 version of +the BSD popper program (as distributed on Solaris 2.5 and +elsewhere) is broken this way.</p> + +<p>You can test this. Declare an mda of `cat' and send yourself one +piece of mail containing "From" at start of a line. If you see a +split message, your POP/IMAP server is at fault. Upgrade to a more recent version.</p> -<p>Sendmail and other SMTP listeners don't split RFC822 messages either. -What's probably happening is either sendmail's local delivery agent or -your mail reader are not quite RFC822-conformant and are breaking -messages on what it thinks are Unix-style From headers. You can -figure out which by looking at your client-side mailbox with vi or -more. If the message is already split in your mailbox, your local -delivery agent is the problem. If it's not, your mailreader is the -problem.</p> +<p>Sendmail and other SMTP listeners don't split RFC822 messages +either. What's probably happening is either sendmail's local +delivery agent or your mail reader are not quite RFC822-conformant +and are breaking messages on what it thinks are Unix-style From +headers. You can figure out which by looking at your client-side +mailbox with vi or more. If the message is already split in your +mailbox, your local delivery agent is the problem. If it's not, +your mailreader is the problem.</p> <p>If you can't replace the offending program, take a look at your -sendmail.cf file. There will likely be a line something like</p> +sendmail.cf file. There will likely be a line something like</p> <pre> Mlocal, P=/usr/bin/procmail, F=lsDFMShP, S=10, R=20/40, A=procmail -Y -d $u </pre> -<p>describing your local delivery agent. Try inserting the `E' option in the -flags part (the F= string). This will make sendmail turn each dangerous -start-of-line From into a >From, preventing programs further downstream -from acting up.</p> +<p>describing your local delivery agent. Try inserting the `E' +option in the flags part (the F= string). This will make sendmail +turn each dangerous start-of-line From into a >From, preventing +programs further downstream from acting up.</p> -<hr> -<h2><a name="X4">X4.</a><a name="generic_mangling">My mail is being mangled in a new and different way</a></h2> +<hr /> +<h2><a id="X4" name="X4">X4.</a><a id="generic_mangling" +name="generic_mangling">My mail is being mangled in a new and +different way</a></h2> -<p>The first thing you need to do is pin down what program is doing the -mangling. We don't like getting bug reports about fetchmail that are -actually due to some other program's malfeasance, so please go through -this diagnostic sequence before sending us a complaint.</p> +<p>The first thing you need to do is pin down what program is doing +the mangling. We don't like getting bug reports about fetchmail +that are actually due to some other program's malfeasance, so +please go through this diagnostic sequence before sending us a +complaint.</p> -<p>There are five possible culprits to consider, listed here in the order -they pass your mail:</p> +<p>There are five possible culprits to consider, listed here in the +order they pass your mail:</p> <ol> -<li> Programs upstream of your server mailbox. -<li> The POP or IMAP server on your mailserver host. -<li> The fetchmail program itself. -<li> Your local sendmail. -<li> Your LDA (local delivery agent), as called by sendmail or -specified by <code>mda</CODE>. +<li>Programs upstream of your server mailbox.</li> + +<li>The POP or IMAP server on your mailserver host.</li> + +<li>The fetchmail program itself.</li> + +<li>Your local sendmail.</li> + +<li>Your LDA (local delivery agent), as called by sendmail or +specified by <code>mda</code>.</li> </ol> -<p>Often it happens that fetchmail itself is OK, but using it exposes -pre-existing bugs in your downstream software, or your downstream -software has a bad interaction with POP/IMAP. You need to pin down -exactly where the message is being garbled in order to deduce what is -actually going on.</p> +<p>Often it happens that fetchmail itself is OK, but using it +exposes pre-existing bugs in your downstream software, or your +downstream software has a bad interaction with POP/IMAP. You need +to pin down exactly where the message is being garbled in order to +deduce what is actually going on.</p> -<p>The first thing to do is send yourself a test message, and retrieve it -with a .fetchmailrc entry containing the following (or by running with -the equivalent command-line options):</p> +<p>The first thing to do is send yourself a test message, and +retrieve it with a .fetchmailrc entry containing the following (or +by running with the equivalent command-line options):</p> <pre> mda "cat >MBOX" keep fetchall </pre> -<p>This will capture what fetchmail gets from the server, except for (a) -the extra Received header line fetchmail prepends, (b) header address -changes due to <code>rewrite</code>, and (c) any end-of-line changes -due to the <code>forcecr</code> and <code>stripcr</code> options. -MBOX will in fact contain what programs downstream of fetchmail -see.</p> - -<p>The most common causes of mangling are bugs and misconfigurations in -those downstream programs. If MBOX looks unmangled, you will know -that is what is going on and that it is not fetchmail's problem. Take -a look at the other FAQ items in this section for possible clues about -how to fix your problem.</p> - -<p>If MBOX looks mangled, the next thing to do is compare it with your -actual server mailbox (if possible). That's why you specified -<code>keep</code>, so the server copy would not be deleted. If your -server mailbox looks mangled, programs upstream of your server mailbox -are at fault. Unfortunately there is probably little you can do about -this aside from complaining to your site postmaster, and nothing at -all fetchmail can do about it!</p> - -<p>More likely you'll find that the server copy looks OK. In that case -either the POP/IMAP server or fetchmail is doing the mangling. To -determine which, you'll need to telnet to the server port and simulate -a fetchmail session yourself. This is not actually hard (both POP3 -and IMAP are simple, text-only, line-oriented protocols) but requires -some attention to detail. You should be able to use a fetchmail -v -log as a model for a session, but remember that the "*" in your LOGIN -or PASS command dump has to be replaced with your actual password.</p> +<p>This will capture what fetchmail gets from the server, except +for (a) the extra Received header line fetchmail prepends, (b) +header address changes due to <code>rewrite</code>, and (c) any +end-of-line changes due to the <code>forcecr</code> and +<code>stripcr</code> options. MBOX will in fact contain what +programs downstream of fetchmail see.</p> + +<p>The most common causes of mangling are bugs and +misconfigurations in those downstream programs. If MBOX looks +unmangled, you will know that is what is going on and that it is +not fetchmail's problem. Take a look at the other FAQ items in this +section for possible clues about how to fix your problem.</p> + +<p>If MBOX looks mangled, the next thing to do is compare it with +your actual server mailbox (if possible). That's why you specified +<code>keep</code>, so the server copy would not be deleted. If your +server mailbox looks mangled, programs upstream of your server +mailbox are at fault. Unfortunately there is probably little you +can do about this aside from complaining to your site postmaster, +and nothing at all fetchmail can do about it!</p> + +<p>More likely you'll find that the server copy looks OK. In that +case either the POP/IMAP server or fetchmail is doing the mangling. +To determine which, you'll need to telnet to the server port and +simulate a fetchmail session yourself. This is not actually hard +(both POP3 and IMAP are simple, text-only, line-oriented protocols) +but requires some attention to detail. You should be able to use a +fetchmail -v log as a model for a session, but remember that the +"*" in your LOGIN or PASS command dump has to be replaced with your +actual password.</p> <p>The objective of manually simulating fetchmail is so you can see -exactly what fetchmail sees. If you see a mangled message, then your -server is at fault, and you probably need to complain to your -mailserver administrators. However, we like to know what the broken -servers are so we can warn people away from them. So please send -us a transcript of the session including the mangling <em>and the -server's initial greeting line</em>. Please tell us anything else +exactly what fetchmail sees. If you see a mangled message, then +your server is at fault, and you probably need to complain to your +mailserver administrators. However, we like to know what the broken +servers are so we can warn people away from them. So please send us +a transcript of the session including the mangling <em>and the +server's initial greeting line</em>. Please tell us anything else you think might be useful about the server, like the server host's operating system.</p> <p>If your manual fetchmail simulation shows an unmangled message, -congratulations. You've found an actual fetchmail bug, which is a -pretty rare thing these days. Complain to us and we'll fix it. +congratulations. You've found an actual fetchmail bug, which is a +pretty rare thing these days. Complain to us and we'll fix it. Please include the session transcript of your manual fetchmail -simulation along with the other things described in the FAQ entry on -<a href="#G3">reporting bugs</a>.</p> +simulation along with the other things described in the FAQ entry +on <a href="#G3">reporting bugs</a>.</p> -<hr> -<h2><a name="X5">X5. Using POP3, retrievals seems to be fetching too much!</a></h2> +<hr /> +<h2><a id="X5" name="X5">X5. Using POP3, retrievals seems to be +fetching too much!</a></h2> -<p>This may happen in versions of fetchmail after 4.4.1 and before 4.4.8. -Versions after 4.4.1 use POP3's TOP command rather than RETR, in order -to avoid marking the message seen (leaving it unseen is helpful for -later recovery if you lose your connection in the middle of a -retrieval).</p> +<p>This may happen in versions of fetchmail after 4.4.1 and before +4.4.8. Versions after 4.4.1 use POP3's TOP command rather than +RETR, in order to avoid marking the message seen (leaving it unseen +is helpful for later recovery if you lose your connection in the +middle of a retrieval).</p> -<p>Versions of fetchmail from 4.4.2 through 4.4.7 had a bad interaction -with Eudora qpopper versions 2.3 and later. The TOP bounds check was -fooled by an overflow condition in the TOP argument. Decrementing the -TOP argument in 4.4.7 fixed this.</p> +<p>Versions of fetchmail from 4.4.2 through 4.4.7 had a bad +interaction with Eudora qpopper versions 2.3 and later. The TOP +bounds check was fooled by an overflow condition in the TOP +argument. Decrementing the TOP argument in 4.4.7 fixed this.</p> <p>Fix: Upgrade to a later version of fetchmail.</p> -<p>Workaround: set the <code>fetchall</code> option. Under POP3 +<p>Workaround: set the <code>fetchall</code> option. Under POP3 this has the side effect of forcing RETR use.</p> -<hr> -<h2><a name="X6">X6. My mail attachments are being dropped or mangled.</a></h2> +<hr /> +<h2><a id="X6" name="X6">X6. My mail attachments are being dropped +or mangled.</a></h2> -<p>This isn't fetchmail's doing -- fetchmail never drops lines in message -bodies or attachments. It may be your POP server, or it may be the -sender's mail user agent (or a bad combination of both).</p> +<p>This isn't fetchmail's doing -- fetchmail never drops lines in +message bodies or attachments. It may be your POP server, or it may +be the sender's mail user agent (or a bad combination of both).</p> -<p>The Mail Max POP3 server and the InterChange and Imail IMAP servers -are known to simply drop MIME attachments when uploading messages. -We've had sporadic reports of problems with Microsoft Exchange and -Outlook servers. Windows- and NT-based POP servers seem especially -prone to mangle attachments. If you are running one of these, -replacing your server with a Unix machine is probably the only -effective solution.</p> +<p>The Mail Max POP3 server and the InterChange and Imail IMAP +servers are known to simply drop MIME attachments when uploading +messages. We've had sporadic reports of problems with Microsoft +Exchange and Outlook servers. Windows- and NT-based POP servers +seem especially prone to mangle attachments. If you are running one +of these, replacing your server with a Unix machine is probably the +only effective solution.</p> <p>We've also had a report that Lotus Notes sometimes trashes the -MIME type of messages. In particular, it seems to modify MIME -headers introducing type application/pdf, mangling the type -to application/octet-stream. It may corrupt other MIME types -as well.<p> +MIME type of messages. In particular, it seems to modify MIME +headers introducing type application/pdf, mangling the type to +application/octet-stream. It may corrupt other MIME types as +well.</p> <p>The IMAP service of Lotus Domino has a known bug in the way it -generates MIME Content-type headers (observed on Lotus Domino 5.0.2b). -It's a subtle one that doesn't show up when Netscape Messenger and -other clients use a FETCH BODY[] to grab the whole message. When -fetchmail uses FETCH RFC822.HEADER and FETCH RFC822.TEXT to get first -the header and then the body, Domino generates different Boundary tags -for each part, .e.g. one tag is declared in the Content-type header and -another is used to separate the MIME parts in the body. This doesn't -work. (I have heard a rumor that this bug is scheduled to be fixed -in Domino release 6; you can find a workaround at contrib/domino.)</p> - -<p>Another rich source of attachment problems is Microsoft Exchange and -Microsoft Outlook. If you see unreadable attachments with a -ContentType of "application/x-tnef", you're having this problem. The -<a href="http://world.std.com/~damned/software.html">TNEF</a> utility -may help.</p> - -<p>Rob Funk explains: Unfortunately there also remain many mail user -agents that don't write correct MIME messages. One big offender is Sun -MailTool attachments, which are formatted enough like MIME that some -programs could get confused; these are generated by the mailtool and -dtmail programs (the mail programs in Sun's OpenWindows and CDE -environments).</p> - -<p>One solution to problems related to misformatted MIME attachments is -the <a href="ftp://ftp.uu.se/pub/unix/networking/mail/emil/">emil</a> +generates MIME Content-type headers (observed on Lotus Domino +5.0.2b). It's a subtle one that doesn't show up when Netscape +Messenger and other clients use a FETCH BODY[] to grab the whole +message. When fetchmail uses FETCH RFC822.HEADER and FETCH +RFC822.TEXT to get first the header and then the body, Domino +generates different Boundary tags for each part, .e.g. one tag is +declared in the Content-type header and another is used to separate +the MIME parts in the body. This doesn't work. (I have heard a +rumor that this bug is scheduled to be fixed in Domino release 6; +you can find a workaround at contrib/domino.)</p> + +<p>Another rich source of attachment problems is Microsoft Exchange +and Microsoft Outlook. If you see unreadable attachments with a +ContentType of "application/x-tnef", you're having this problem. +The <a href="http://world.std.com/~damned/software.html">TNEF</a> +utility may help.</p> + +<p>Rob Funk explains: Unfortunately there also remain many mail +user agents that don't write correct MIME messages. One big +offender is Sun MailTool attachments, which are formatted enough +like MIME that some programs could get confused; these are +generated by the mailtool and dtmail programs (the mail programs in +Sun's OpenWindows and CDE environments).</p> + +<p>One solution to problems related to misformatted MIME +attachments is the <a +href="ftp://ftp.uu.se/pub/unix/networking/mail/emil/">emil</a> program; see its <a href="ftp://ftp.uu.se/pub/unix/networking/mail/emil/TUTORIAL.html">tutorial</a> -file at that site for details on emil. It is useful for -converting character sets, attachment encodings, and attachment -formats. At this writing, emil does not appear to have been -maintained since a patch to version 2.1.0beta9 in late 1997, but it is -still useful.</p> +file at that site for details on emil. It is useful for converting +character sets, attachment encodings, and attachment formats. At +this writing, emil does not appear to have been maintained since a +patch to version 2.1.0beta9 in late 1997, but it is still +useful.</p> -<p>One good way of using emil is from within procmail. You can have +<p>One good way of using emil is from within procmail. You can have procmail look for signs of problematic message formatting, and pipe -those messages through emil to be fixed. emil will not always be able -to fix the problem, in which case the message is unchanged.</p> +those messages through emil to be fixed. emil will not always be +able to fix the problem, in which case the message is +unchanged.</p> -<p>A possible rule to be inserted into a .procmailrc file for using emil -would be:</p> +<p>A possible rule to be inserted into a .procmailrc file for using +emil would be:</p> <pre> :0HB @@ -2764,131 +3117,149 @@ would be:</p> } </pre> -<p>The "1^1" in the conditions is a way of specifying to procmail that if -any one of the four listed expressions is found in the message, the -total condition is considered true, and the message gets passed into -emil. These four subconditions check whether the message has a Sun -attachment, a binhex attachment, or a uuencoded attachment; there are -others that could be added to check these things better and to check -other relevant conditions. The "LOG=" line writes a line into the -procmail log; the lone double-quote beginning the following line makes -sure the log entry gets an end-of-line character. The call to gawk -(GNU awk) is for fixing end-of-line conventions, since emil sometimes -leaves those in the format of the originating machine; it could -probably be replaced with a sed subsitution.</p> +<p>The "1^1" in the conditions is a way of specifying to procmail +that if any one of the four listed expressions is found in the +message, the total condition is considered true, and the message +gets passed into emil. These four subconditions check whether the +message has a Sun attachment, a binhex attachment, or a uuencoded +attachment; there are others that could be added to check these +things better and to check other relevant conditions. The "LOG=" +line writes a line into the procmail log; the lone double-quote +beginning the following line makes sure the log entry gets an +end-of-line character. The call to gawk (GNU awk) is for fixing +end-of-line conventions, since emil sometimes leaves those in the +format of the originating machine; it could probably be replaced +with a sed subsitution.</p> <p>The emil call itself tries to ensure that the message uses:</p> <ul> -<li> BinHex encoding for any Apple Macintosh-only attachments -<li> Quoted-Printable encoding for text (when necessary) -<li> Base64 Encoding for binary attachments -<li> iso-8859-1 character set for text (unfortunately emil can't yet - convert from windows-1252 to iso-8859-1) -<li> Quoted-Printable encoding for headers -<li> MIME attachment format +<li>BinHex encoding for any Apple Macintosh-only attachments</li> + +<li>Quoted-Printable encoding for text (when necessary)</li> + +<li>Base64 Encoding for binary attachments</li> + +<li>iso-8859-1 character set for text (unfortunately emil can't yet +convert from windows-1252 to iso-8859-1)</li> + +<li>Quoted-Printable encoding for headers</li> + +<li>MIME attachment format</li> </ul> -<p>Most of these (the primary exceptions being the character set and the -Apple binary format) are as they should be for good internet -interoperability.<p> - +<p>Most of these (the primary exceptions being the character set +and the Apple binary format) are as they should be for good +internet interoperability.</p> + <p>Some mail servers (Lotus Domino is a suspect here) mangle Sun-formatted messages, so the conversion to MIME needs to happen -before such programs see the message. The ideal is to rid the world -of Sun-formatted messages: don't use mailtool for sending attachments -(it doesn't understand MIME anyway, and most of the world doesn't -understand its attachments, so it really shouldn't be used at all), -and make sure dtmail is set to use MIME rather than mailtool's format.</p> - -<hr> -<h2><a name="X7">X7. Some mail attachments are hanging fetchmail.</a></h2> - -<p>This isn't fetchmail's problem either; fetchmail doesn't know anything -about mail attachments and doesn't treat them any differently from -plain message data.</p> - -<p>The most usual cause of this problem seems to be bugs in your network -transport layer's capability to handle the very large TCP/IP packets -that attachments tend to turn into. You can test this theory by trying to -download the offending message through a webmail account; using HTTP -for the message tends to simulate large-packet stress rather well, and -you will probably find that the messages that seem to be choking -fetchmail will make your HTTP download speed drop to zero.</p> - -<p>This problem can be caused by subtle bugs in the packet-reassembly -layer of your TCP/IP stack; these often don't manifest at normal -packet sizes. It may also be caused by malfunctioning path-MTU -discovery on the mailserver. Or, if there's a modem in the link, -it may be because the attachment contains the Hayes mode escape "+++".</p> - -<hr> -<h2><a name="X8">X8. A spurious ) is being appended to my messages.</a></h2> +before such programs see the message. The ideal is to rid the world +of Sun-formatted messages: don't use mailtool for sending +attachments (it doesn't understand MIME anyway, and most of the +world doesn't understand its attachments, so it really shouldn't be +used at all), and make sure dtmail is set to use MIME rather than +mailtool's format.</p> + +<hr /> +<h2><a id="X7" name="X7">X7. Some mail attachments are hanging +fetchmail.</a></h2> + +<p>This isn't fetchmail's problem either; fetchmail doesn't know +anything about mail attachments and doesn't treat them any +differently from plain message data.</p> + +<p>The most usual cause of this problem seems to be bugs in your +network transport layer's capability to handle the very large +TCP/IP packets that attachments tend to turn into. You can test +this theory by trying to download the offending message through a +webmail account; using HTTP for the message tends to simulate +large-packet stress rather well, and you will probably find that +the messages that seem to be choking fetchmail will make your HTTP +download speed drop to zero.</p> + +<p>This problem can be caused by subtle bugs in the +packet-reassembly layer of your TCP/IP stack; these often don't +manifest at normal packet sizes. It may also be caused by +malfunctioning path-MTU discovery on the mailserver. Or, if there's +a modem in the link, it may be because the attachment contains the +Hayes mode escape "+++".</p> + +<hr /> +<h2><a id="X8" name="X8">X8. A spurious ) is being appended to my +messages.</a></h2> <p>Blame it on that rancid pile of dung and offal called Microsoft -Exchange. Due to the problem described in <a href="#S2">S2</a>, the -IMAP support in fetchmail cannot follow the IMAP protocol 100%. Most -of the time it doesn't matter, but if you combine it with an SMTP -server that behaves unusually, you'll get a spurious ) at message end.</p> +Exchange. Due to the problem described in <a href="#S2">S2</a>, the +IMAP support in fetchmail cannot follow the IMAP protocol 100%. +Most of the time it doesn't matter, but if you combine it with an +SMTP server that behaves unusually, you'll get a spurious ) at +message end.</p> + +<p>One piece of software that can trigger this is the Interchange +mail server, as used by, e.g., mailandnews.com. Here's what +happens:</p> + +<p>1. Someone sends mail to your account. The last line of the +message contains text. So at the SMTP level, the message ends with, +e.g. "blahblah\r\n.\r\n"</p> + +<p>2. The SMTP handler sees the final "\r\n.\r\n" and recognizes +the end of the message. However, instead of doing the normal thing, +which is tossing out the ".\r\n" and leaving the first '\r\n' as +part of the email body, Interchange throws out the whole +"\r\n.\r\n", and leaves the email body without any line terminator +at the end of it. RFC821 does not forbid this, though it probably +should.</p> + +<p>3. Fetchmail, or some other IMAP client, asks for the message. +IMAP returns it, but it's enclosed inside parentheses, according to +the protocol. The message size in bytes is also present. Because +the message doesn't end with a line terminator, the IMAP client +sees:</p> -<p>One piece of software that can trigger this is the Interchange mail -server, as used by, e.g., mailandnews.com. Here's what happens: - -<p>1. Someone sends mail to your account. The last line of the message -contains text. So at the SMTP level, the message ends with, e.g. -"blahblah\r\n.\r\n" - -<p>2. The SMTP handler sees the final "\r\n.\r\n" and recognizes the -end of the message. However, instead of doing the normal thing, which -is tossing out the ".\r\n" and leaving the first '\r\n' as part of the -email body, Interchange throws out the whole "\r\n.\r\n", and leaves -the email body without any line terminator at the end of it. RFC821 -does not forbid this, though it probably should. +<pre> -<p>3. Fetchmail, or some other IMAP client, asks for the message. IMAP -returns it, but it's enclosed inside parentheses, according to the -protocol. The message size in bytes is also present. Because the -message doesn't end with a line terminator, the IMAP client sees:</p> - -<pre> ....blahblah)... </pre> <p>where the ')' is from IMAP.</p> - -<p>4. Fetchmail only deals with complete lines, and can't trust the + +<p>4. Fetchmail only deals with complete lines, and can't trust the stated message size because Microsoft Exchange fscks it up.</p> -<p>5. As a result, fetchmail takes the final 'blahblah)' and puts it -at the end of the message it forwards on. If you have verbosity on, -you'll get a message about actual != expected.</p> +<p>5. As a result, fetchmail takes the final 'blahblah)' and puts +it at the end of the message it forwards on. If you have verbosity +on, you'll get a message about actual != expected.</p> -<p>There is no fix for this. The nuke mentioned in <a +<p>There is no fix for this. The nuke mentioned in <a href="#S2">S2</a> looks more tempting all the time.</p> -<hr> -<h2><a name="O1">O1. The --logfile option doesn't work if the logfile doesn't exist.</a></h2> +<hr /> +<h2><a id="O1" name="O1">O1. The --logfile option doesn't work if +the logfile doesn't exist.</a></h2> -<p>This is a feature, not a bug. It's in line with normal practice for -system daemons and allows you to suppress logging by removing the log, -without hacking potentially fragile startup scripts. To get around -it, just touch(1) the logfile before you run fetchmail (this will have -no effect on the contents of the logfile if it already exists).</p> +<p>This is a feature, not a bug. It's in line with normal practice +for system daemons and allows you to suppress logging by removing +the log, without hacking potentially fragile startup scripts. To +get around it, just touch(1) the logfile before you run fetchmail +(this will have no effect on the contents of the logfile if it +already exists).</p> -<hr> -<h2><a name="O2">O2. Every time I get a POP or IMAP message the header -is dumped to all my terminal sessions.</a></h2> +<hr /> +<h2><a id="O2" name="O2">O2. Every time I get a POP or IMAP message +the header is dumped to all my terminal sessions.</a></h2> -<p>Fetchmail uses the local sendmail to perform final delivery, which -Netscape and other clients doesn't do; the announcement of new messages -is done by a daemon that sendmail pokes. There should be a ``biff'' -command to control this. Type</p> +<p>Fetchmail uses the local sendmail to perform final delivery, +which Netscape and other clients doesn't do; the announcement of +new messages is done by a daemon that sendmail pokes. There should +be a ``biff'' command to control this. Type</p> <pre> biff n </pre> -<p>to turn it off. If this doesn't work, try the command </p> +<p>to turn it off. If this doesn't work, try the command</p> <pre> chmod -x `tty` @@ -2898,196 +3269,215 @@ chmod -x `tty` doesn't work, comment out any reference to ``comsat'' in your /etc/inetd.conf file and restart inetd.</p> -<p>In Slackware Linux distributions, the last line in /etc/profile is</p> +<p>In Slackware Linux distributions, the last line in /etc/profile +is</p> <pre> biff y </pre> -Change this to +Change this to <pre> biff n </pre> -to solve the problem system-wide. +to solve the problem system-wide. -<hr> -<h2><a name="O3">O3. Does fetchmail reread its rc file every poll cycle?</a></h2> +<hr /> +<h2><a id="O3" name="O3">O3. Does fetchmail reread its rc file +every poll cycle?</a></h2> -<p>No, but versions 5.2.2 and later will notice when you modify your rc -file and restart, reading it.</p> +<p>No, but versions 5.2.2 and later will notice when you modify +your rc file and restart, reading it.</p> -<hr> -<h2><a name="O4">O4. Why do deleted messages show up again when I take -a line hit while downloading?</a></h2> +<hr /> +<h2><a id="O4" name="O4">O4. Why do deleted messages show up again +when I take a line hit while downloading?</a></h2> -<p>Because you're using a POP3 other than Qualcomm qpopper, or an IMAP -with a long expunge interval.</p> +<p>Because you're using a POP3 other than Qualcomm qpopper, or an +IMAP with a long expunge interval.</p> -<p>According to the POP3 RFCs, deletes aren't actually performed until -you issue the end-of-session QUIT command. Fetchmail cannot fix this, -because doing it right takes cooperation from the server. There are -two possible remedies:</p> +<p>According to the POP3 RFCs, deletes aren't actually performed +until you issue the end-of-session QUIT command. Fetchmail cannot +fix this, because doing it right takes cooperation from the server. +There are two possible remedies:</p> <p>One is to switch to qpopper (the free POP3 server from Qualcomm, -the Eudora people). The qpopper software violates the POP3 RFCs by -doing an expunge (removing deleted messages) on a line hangup, as well -as on processing a QUIT command.</p> +the Eudora people). The qpopper software violates the POP3 RFCs by +doing an expunge (removing deleted messages) on a line hangup, as +well as on processing a QUIT command.</p> <p>The other (which we recommend) is to switch to <a -href="http://www.imap.org">IMAP</a>. IMAP has an explicit expunge -command and fetchmail normally uses it to delete messages immediately -after they are downloaded.</p> +href="http://www.imap.org">IMAP</a>. IMAP has an explicit expunge +command and fetchmail normally uses it to delete messages +immediately after they are downloaded.</p> <p>If you get very unlucky, you might take a line hit in the window -between the delete and the expunge. If you've set a longer expunge -interval, the window gets wider. This problem should correct itself +between the delete and the expunge. If you've set a longer expunge +interval, the window gets wider. This problem should correct itself the next time you complete a successful query.</p> -<hr> -<h2><a name="O5">O5. Why is fetched mail being logged with my name, not the real From address?</a></h2> +<hr /> +<h2><a id="O5" name="O5">O5. Why is fetched mail being logged with +my name, not the real From address?</a></h2> -<p>Because logging is done based on the address indicated by the sending -SMTP's MAIL FROM, and some listeners are picky about that address.</p> +<p>Because logging is done based on the address indicated by the +sending SMTP's MAIL FROM, and some listeners are picky about that +address.</p> -<p>Some SMTP listeners get upset if you try to hand them a MAIL FROM -address naming a different host than the originating site for your -connection. This is a feature, not a bug -- it's supposed to help -prevent people from forging mail with a bogus origin site. (RFC 1123 -says you shouldn't do this exclusion...)</p> +<p>Some SMTP listeners get upset if you try to hand them a MAIL +FROM address naming a different host than the originating site for +your connection. This is a feature, not a bug -- it's supposed to +help prevent people from forging mail with a bogus origin site. +(RFC 1123 says you shouldn't do this exclusion...)</p> <p>Since the originating site of a fetchmail delivery connection is -localhost, this effectively means these picky listeners will barf on -any MAIL FROM address fetchmail hands them with an @ in it!</p> +localhost, this effectively means these picky listeners will barf +on any MAIL FROM address fetchmail hands them with an @ in it!</p> -<p>Versions 2.1 and up try the header From address first and fall back to -the calling-user ID. So if your SMTP listener isn't picky, the log -will look right.</p> +<p>Versions 2.1 and up try the header From address first and fall +back to the calling-user ID. So if your SMTP listener isn't picky, +the log will look right.</p> -<hr> -<h2><a name="O6">O6. I'm seeing long sendmail delays or hangs near the start of each poll cycle.</a></h2> +<hr /> +<h2><a id="O6" name="O6">O6. I'm seeing long sendmail delays or +hangs near the start of each poll cycle.</a></h2> -<p>Sendmail does a hostname lookup when it first starts up, and also each -time it gets a HELO in listener mode.</p> +<p>Sendmail does a hostname lookup when it first starts up, and +also each time it gets a HELO in listener mode.</p> -<p>Your resolver configuration may be causing one of these lookups to -fail and time out. Check <code>/etc/resolv.conf</code> and +<p>Your resolver configuration may be causing one of these lookups +to fail and time out. Check <code>/etc/resolv.conf</code> and <code>/etc/hosts</code> file. Make sure your hostname and -fully-qualified domain name are both in <code>/etc/hosts</code>, and -that hosts is looked at before DNS is queried. You probably also want -your remote mail server(s) to be in the hosts file.</p> +fully-qualified domain name are both in <code>/etc/hosts</code>, +and that hosts is looked at before DNS is queried. You probably +also want your remote mail server(s) to be in the hosts file.</p> -<p>You can suppress the startup-time lookup if need to by reconfiguring -with <code>FEATURE(nodns)</code>.</p> +<p>You can suppress the startup-time lookup if need to by +reconfiguring with <code>FEATURE(nodns)</code>.</p> -<p>Configuring your bind library to cache DNS lookups locally may help, -and is a good idea for speeding up other services as well. Switching to -a faster MTA like qmail or exim might help.</p> +<p>Configuring your bind library to cache DNS lookups locally may +help, and is a good idea for speeding up other services as well. +Switching to a faster MTA like qmail or exim might help.</p> -<hr> -<h2><a name="O7">O7. Why doesn't fetchmail deliver mail in date-sorted order?</a></h2> +<hr /> +<h2><a id="O7" name="O7">O7. Why doesn't fetchmail deliver mail in +date-sorted order?</a></h2> -<p>Because that's not the order the server hands it to fetchmail in.</p> +<p>Because that's not the order the server hands it to fetchmail +in.</p> -<p>Fetchmail getting mail from a POP server delivers mail in the order -that your server delivers mail. Fetchmail can't do anything about -this; it's a limitation of the underlying POP protocol.</p> +<p>Fetchmail getting mail from a POP server delivers mail in the +order that your server delivers mail. Fetchmail can't do anything +about this; it's a limitation of the underlying POP protocol.</p> -<p>In theory it might be possible for fetchmail in IMAP mode to sort -messages by date, but this would be in violation of two basics of -fetchmail's design philosophy: (a) to be as simple and transparent a -pipe as possible, and (b) to <em>hide</em>, rather than emphasize, the -differences between the remote-fetch protocols it uses.</p> +<p>In theory it might be possible for fetchmail in IMAP mode to +sort messages by date, but this would be in violation of two basics +of fetchmail's design philosophy: (a) to be as simple and +transparent a pipe as possible, and (b) to <em>hide</em>, rather +than emphasize, the differences between the remote-fetch protocols +it uses.</p> <p>Re-ordering messages is a user-agent function, anyway.</p> -<hr> -<h2><a name="O8">O8. I'm using pppd. Why isn't my monitor option working?</a></h2> +<hr /> +<h2><a id="O8" name="O8">O8. I'm using pppd. Why isn't my monitor +option working?</a></h2> -<p>There is a combination of circumstances that can confuse fetchmail. -If you have set up demand dialing with pppd, and pppd has an idle -timeout, and you have lcp-echo-interval set, then the +<p>There is a combination of circumstances that can confuse +fetchmail. If you have set up demand dialing with pppd, and pppd +has an idle timeout, and you have lcp-echo-interval set, then the lcp-echo-interval time must be longer than the pppd idle timeout. -Otherwise it is going keep increasing the packet counters that fetchmail -relies upon, triggering fetchmail into polling after its own delay -interval and thus preventing the pppd link from ever reaching its -inactivity timeout.</p> - -<hr> -<h2><a name="O9">O9. Why does fetchmail keep retrieving the same messages -over and over?</a></h2> - -<p>First, check to see that you haven't enabled the <cite>keep</cite> -and <cite>fetchall</cite> option. If you have, turn <cite>keep</cite> off.</p> - -<p>There are various forms of lossage involving the POP3 UIDL feature -that can lead to all your old messages being seen again after a line -drop. I have given up trying to fix these, as the UIDL code breaks -worse every time I touch it. The problem is fundamental; maintaining -and garbage-collecting the right kind of client-side state is just -hard. Whoever put UIDLs in RFC1725 and removed LAST should be hung -up by his thumbs and whipped with scorpions. The right answers are -either (a) live with the occasional breakage, (b) switch to IMAP4, -or (c) fix the code yourself and send me a patch. Unless you choose -(c), I don't want to hear about it.</p> - -<p>This can also happen when some other mail client is logged in to your -mail server, if it uses a simple exclusive-locking scheme (and many, -especially most POP3 servers, do exactly that). Your fetchmail is -able to retrieve the messages, but because the mailbox is write-locked -by the other instance yours can neither mark messages seen or delete them. -The solution is to either (a) wait for the other client to finish, or (b) -terminate it.</p> - -<p>James Stevens <James.Stevens@kyzo.com> writes:<p> - -<em> -<p>We had a Linux box dialing the Net and collecting mail from an NT POP3 -server. Fetchmail was correctly collecting and deleting each e-mail -one by one. However,the dial-up connection was very unreliable and -would often just drop out in the middle of a session.</p> - -<p>Interestingly, unless the TCP POP3 connection was terminated normally -(I guess with a POP3 "QUIT" command) NT would then roll back all the -deletes !!!</p> - -<p>This meant if the first e-mail was very large it might just end up -continuously collecting it, basically jamming the queue. Or, if the -queue became very full itmight never get a long enough phone -connection to retrieve the entire mailbox, and NT would roll back any -deletes, so it would end up collecting (and delivering) the first few -e-mails again and again. As the POP3 mailbox became fuller and fuller -the chances of getting a connection long enough to collect theentire -mailbox became smaller and smaller.</p> - -<p>Our solution was to make fetchmail only collect a few (say 5 or 10) -e-mails at atime, thus trying to ensure that the POP3 connection is -terminated correctly. -</em></p> - -<p>Unfortunately, this is exactly the way POP3 servers are supposed -to behave on a line drop, according to the RFCs. I recommend +Otherwise it is going keep increasing the packet counters that +fetchmail relies upon, triggering fetchmail into polling after its +own delay interval and thus preventing the pppd link from ever +reaching its inactivity timeout.</p> + +<hr /> +<h2><a id="O9" name="O9">O9. Why does fetchmail keep retrieving the +same messages over and over?</a></h2> + +<p>First, check to see that you haven't enabled the +<cite>keep</cite> and <cite>fetchall</cite> option. If you have, +turn <cite>keep</cite> off.</p> + +<p>There are various forms of lossage involving the POP3 UIDL +feature that can lead to all your old messages being seen again +after a line drop. I have given up trying to fix these, as the UIDL +code breaks worse every time I touch it. The problem is +fundamental; maintaining and garbage-collecting the right kind of +client-side state is just hard. Whoever put UIDLs in RFC1725 and +removed LAST should be hung up by his thumbs and whipped with +scorpions. The right answers are either (a) live with the +occasional breakage, (b) switch to IMAP4, or (c) fix the code +yourself and send me a patch. Unless you choose (c), I don't want +to hear about it.</p> + +<p>This can also happen when some other mail client is logged in to +your mail server, if it uses a simple exclusive-locking scheme (and +many, especially most POP3 servers, do exactly that). Your +fetchmail is able to retrieve the messages, but because the mailbox +is write-locked by the other instance yours can neither mark +messages seen or delete them. The solution is to either (a) wait +for the other client to finish, or (b) terminate it.</p> + +<p>James Stevens <James.Stevens@kyzo.com> writes:</p> + +<p><em>We had a Linux box dialing the Net and collecting mail from +an NT POP3 server. Fetchmail was correctly collecting and deleting +each e-mail one by one. However,the dial-up connection was very +unreliable and would often just drop out in the middle of a +session.</em></p> + +<p><em>Interestingly, unless the TCP POP3 connection was terminated +normally (I guess with a POP3 "QUIT" command) NT would then roll +back all the deletes !!!</em></p> + +<p><em>This meant if the first e-mail was very large it might just +end up continuously collecting it, basically jamming the queue. Or, +if the queue became very full itmight never get a long enough phone +connection to retrieve the entire mailbox, and NT would roll back +any deletes, so it would end up collecting (and delivering) the +first few e-mails again and again. As the POP3 mailbox became +fuller and fuller the chances of getting a connection long enough +to collect theentire mailbox became smaller and smaller.</em></p> + +<p><em>Our solution was to make fetchmail only collect a few (say 5 +or 10) e-mails at atime, thus trying to ensure that the POP3 +connection is terminated correctly.</em></p> + +<p>Unfortunately, this is exactly the way POP3 servers are supposed +to behave on a line drop, according to the RFCs. I recommend switching to IMAP and using a short expunge interval.</p> -<hr> -<h2><a name="O10">O10. Why is the received date on all my messages the same?</a></h2> +<hr /> +<h2><a id="O10" name="O10">O10. Why is the received date on all my +messages the same?</a></h2> -<p>This is a design choice in your MTA, not fetchmail. It's taking +<p>This is a design choice in your MTA, not fetchmail. It's taking the received date from the last Received header.</p> -<HR> -<table width="100%" cellpadding=0><tr> -<td width="30%">Back to <a href="index.html">Fetchmail Home Page</a> -<td width="30%" align=center>To <a href="/~esr/sitemap.html">Site Map</a> -<td width="30%" align=right>$Date: 2002/07/10 13:56:19 $ +<hr /> +<table width="100%" cellpadding="0" summary="Canned page footer"> +<tr> +<td width="30%">Back to <a href="index.html">Fetchmail Home +Page</a></td> +<td width="30%" align="center">To <a href="/~esr/sitemap.html">Site +Map</a></td> +<td width="30%" align="right">$Date: 2002/07/30 13:26:48 $</td> +</tr> </table> -<ADDRESS>Eric S. Raymond <A HREF="mailto:esr@thyrsus.com"><esr@thyrsus.com></A></ADDRESS> -</BODY> -</HTML> +<br clear="left" /> +<address>Eric S. Raymond <a +href="mailto:esr@thyrsus.com"><esr@thyrsus.com></a></address> + <!-- Local Variables: compile-command: "(cd ~/WWW; upload fetchmail/fetchmail-FAQ.html)" End: --> +</body> +</html> + |